Register your product and get support at
FWM387/12
EN User manual
FR Mode d’emploi
IT Manuale utente
NL Gebruiksaanwijzing
SV Användarhandbok
DA Brugervejledning
DE Benutzerhandbuch
ES Manual del usuario
Download from Www.Somanuals.com. All Manuals Search And Download.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
1 Important
m Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
g Do not block any ventilation openings.
Install in accordance with the
•
•
•
Install all batteries correctly, + and -
as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
j Only use attachments/accessories
q This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
specified by the manufacturer.
k Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
r Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain
readily operable.
2
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycling
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keep this apparatus away from direct sunlight, naked
flames or heat.
• Never look into the laser beam inside this apparatus.
• Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus
from the power.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Notice
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
When you see the crossed-out wheel bin
symbol with the chemical symbol ‘Pb’, it
means that the batteries comply with the
requirement set by the directive for lead:
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
Pb
Please inform yourself about the local rules on
separate collection of batteries. The correct
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
Norge
Typeskilt finnes på apparatens underside.
Environmental information
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er
derfor ikke frakoplet nettet så lenge
apparatet er tilsluttet nettkontakten.
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
For å redusere faren for brann eller
elektrisk støt, skal apparatet ikke utsettes
for regn eller fuktighet.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This apparatus includes this label:
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s in the box
2 Your Mini Hi-Fi
System
Check and identify the contents of your
package:
•
•
•
•
•
•
•
Main unit x 1
AC power cable x 1
Loudspeaker box x 2
Remote control with 2 AAA batteries
FM wire antenna x 1
MW loop antenna x 1
MP3 link cable x 1
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
Introduction
With this unit, you can enjoy audio from discs,
tapes, USB devices, external devices, or radio
stations.
For your convenience, you can load up to 3
discs at once.
To enrich sound, this unit offers you these
sound effects:
•
•
•
•
•
MAX sound for instant power boost
Digital Sound Control (DSC)
Dynamic Bass Boost (DBB)
Incredible surround (IS)
Virtual Ambience-based Control (VAC)
The unit supports the following media formats:
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the main unit
f
a Disc compartment door
•
Turn on the unit, switch to standby
mode, or switch to Eco Power
Standby.
b DISPLAY
•
Select display information.
g Source selection keys
Select a source.
c ALBUM/PRESET+/-
•
•
•
•
•
Skip to the previous/next album.
Select a preset radio station.
Adjust time.
h DBB/IS
•
Turn on or off dynamic bass
Select 12 hour or 24 hour format.
enhancement.
•
Turn on or off incredible surround.
d
•
Stop play or erase a program.
i MAX SOUND
Turn on or off instant power boost
for sound.
•
e MODE
Select repeat play or random play.
•
j USB DIRECT
•
Jack for a USB mass storage device.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
k MP3 LINK
Audio input jack (3.5mm ) for an
external audio device.
w
x
•
•
Start or pause play.
/
l Tape deck operation
•
•
•
•
Skip to the previous/next track.
Search within a track/ disc/USB.
Tune to a radio station.
Adjust time.
•
Start to record.
•
Start tape play.
y iR
•
•
/
•
Remote sensor.
Fast rewind/wind the tape.
z Display panel
Show current status.
Stop the tape play or open the tape
door.
•
•
Pause tape play or pause recording.
m OPEN
•
Pull to open the tape button cover.
n MIC LEVEL 1/2
•
Adjust microphone volume.
o MIC 1/2
•
Jack for a microphone.
p TAPE
•
Select the tape source.
q VOLUME
•
Adjust volume.
r CLOCK/TIMER
•
Set the clock.
•
Set the alarm timer.
s DISC 1/2/3
•
Select a disc.
t DISC CHANGE
•
Change a disc.
u OPEN/CLOSE
•
Open or close the disc
compartment.
v PROG
•
Program tracks.
•
Program radio stations.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
d MODE
Overview of the remote
control
•
Select repeat play or random play.
e MAX
•
Turn on or off instant power boost
for sound.
f
g
/
•
•
Search within a track/ disc/USB.
Tune to a radio station.
/
•
•
Skip to the previous/next track.
Adjust time.
h DSC
•
Select a preset sound equalizer
setting.
i
•
Stop play or erase a program.
j ALB/PRESET+/-
•
•
•
Skip to the previous/next album.
Select a preset radio station.
Adjust time.
k MUTE
•
Mute volume.
l Numeric keypad
•
Select a track from a disc directly.
m PROG
•
Program tracks.
•
Program radio stations.
n DISPLAY/CLOCK
•
Select display information.
•
Set the clock.
o VOL +/-
•
Adjust volume.
a POWER
p DBB/IS
•
Turn on the unit, switch to standby
mode, or switch to Eco Power
Standby.
•
Turn on or off dynamic bass
enhancement.
•
Turn on or off incredible surround.
b Source selection keys
q
•
Select a source.
•
Start or pause play.
c RDS
•
Select RDS broadcast information.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
r VAC
•
Select an ambience-based equaliser
setting.
s SLEEP
•
Set the sleep timer.
t TIMER
•
Set the alarm timer.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Insert the right speaker wires to “R”,
left speaker wires to “L”.
Insert the red wires and blue wires
to “+”, black wires to “-”.
3 Get started
3 Release the socket flap.
Caution
• Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Connect FM antenna
Always follow the instructions in this chapter in
sequence.
1 Connect the supplied FM antenna to the
FM jack on the back of the main unit.
If you contact Philips, you will be asked for the
model and serial number of this apparatus.The
model number and serial number are on the
back of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
• For optimal sound, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. (see
‘Speakers’ on page 20)
Connect MW antenna
1 Prepare the MW loop antenna.
2 Connect the MW loop antenna to the
Note
MW jack on the back of the main unit.
• Ensure that the colors of the speaker wires and
terminals are matched.
1 Hold down the socket flap.
2 Insert the stripped part of the wire
completely.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect power
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
3
1
2
Note
• If you are not going to use the remote control for a
long time, remove the batteries.
• Do not use old and new or different types of batteries
in combination.
Caution
• Batteries contain chemical substances, so they should
be disposed of properly.
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage set on the voltage
selector on the back of the unit.
• Before connecting the AC power cord, ensure you
have completed all other connections.
Auto install radio stations
Note
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
• The type plate is located on the back of the main unit.
1 Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY] (auto
install - press the PLAY button) is
displayed.
1 Connect the AC power cable to:
•
•
the main unit.
the wall socket.
2 Press
on the main unit to start
installation.
Prepare the remote control
» [AUTO] (auto) is displayed.
» The unit automatically stores radio
Note
stations with sufficient signal strength.
• Risk of explosion! Keep batteries away from heat,
» When all the available radio stations
are stored, the first preset radio station
is broadcast automatically.
sunshine or fire. Never discard batteries in fire.
To replace the remote control battery:
1 Open the battery compartment.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Set clock
1 In the standby mode, press DISPLAY/
CLOCK to activate the clock setting
mode.
» The 12 hour or 24 hour format is
displayed.
2 Press ALB/PRESET+/- repeatedly to
select 12 hour or 24 hour format.
3 Press DISPLAY/CLOCK to confirm.
» The clock digits are displayed and
begin to blink.
4 Press ALB/PRESET+/- to set the hour.
5 Press
/
to set the minute.
6 Press DISPLAY/CLOCK to confirm.
Tip
• To view the clock during play, press DISPLAY/CLOCK.
Turn on
1 Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1 Press POWER to switch the unit to
standby mode.
» The backlight on the display panel
turns off.
» The clock (if set) appears on the
display panel.
To switch the unit to Eco Power Standby
mode:
1 Press and hold POWER for more than 2
seconds.
» The backlight on the display panel
turns off.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Play from USB
4 Play
Play disc
1 Press DISC 1/2/3 to select the disc
source.
2 Press OPEN/CLOSE on the main unit to
open the disc compartment.
3 Load up to two discs on the disc trays,
with the printed side facing up
•
To load the third disc, press DISC
CHANGE on the main unit to rotate
to the disc tray.
Note
• Ensure that the USB device contains playable audio
contents for supported formats. (see ‘USB playability
information’ on page 20)
2
1
1 Insert the USB plug of the device into the
2
socket.
1
2 Press USB to select the USB source.
3 Press ALB/PRESET+/- to select a folder.
4 Press
/
to select an audio file.
4 Press OPEN/CLOSE on the main unit to
close the disc compartment.
5 Press
to start play.
•
•
•
To pause/resume play, press
To stop play, press
To search within an audio file, press
and hold , then release to
resume normal play.
.
5 Press
to start play.
To select a disc, press DISC 1/2/3.
.
•
•
•
•
To pause/resume play, press
To stop play, press
.
/
.
To select another track, press
press a numeric button.
To select an album, press ALB/
PRESET+/-.
To search within a track, press and
hold , then release to resume
normal play.
/
or
•
•
Play tape
/
Note
• When you play or record a tape, the sound source
cannot be changed.
1 Press TAPE on the main unit to select the
tape source.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Pull at OPEN on the front panel to
open the tape button cover.
3 Press
to open the tape door.
4 Load the tape with the open side
downward and the full spool to the left.
5 Press to start play.
•
•
To pause/resume play, press
.
To fast rewind or wind the tape,
press
To stop play, press
/
.
•
.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press MP3-LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
•
the MP3 LINK jack (3.5mm) on the
unit.
•
the headphone jack on an external
device.
3 Start to play the device (see the device
user manual).
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Display play information
5 Play options
1 During play, press DISPLAY/CLOCK
repeatedly to select different play
information.
Repeat and random play
1 Press MODE repeatedly to select:
•
: the current track is played
repeatedly.
•
•
: all tracks are played repeatedly.
: all tracks are played
randomly and repeatedly.
: all tracks are played randomly.
•
2 To return to normal play, press MODE
repeatedly until play mode is no longer
displayed.
Tip
• Shuffle play cannot be selected when you play
programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB mode, in the stop position,
press PROG to activate the program
mode.
» [PROG] (program) blinks on the
display.
2 For MP3/WMA tracks, press ALB/
PRESET+/- to select an album.
3 Press
/
to select a track number, then
press PROG to confirm.
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press
to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
•
To erase the program, in the stop
position, press
.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
[TECHNO] (techno)
[OPTIMAL] (optimal)
6 Adjust volume
level and sound
effect
Enhance bass
The best DBB (Dynamic Bass Enhancement)
setting is generated automatically for each
DSC selection.You can manually select the
DBB setting that best suits your listening
environment.
Note
• MAX sound and DSC (Digital Sound Control) cannot
be activated at the same time.
1 During play, press DBB/IS repeatedly to
select:
•
•
•
•
DBB 1
DBB 2
DBB 3
DBB off
Adjust volume level
1 During play, press VOL +/- to increase/
» If DBB is activated, DBB is displayed.
decrease the volume level.
Incredible surround
Mute sound
You can enhance audio with a virtual surround
sound effect.
1 During play, press MUTE to mute/unmute
sound.
1 Press and hold DBB/IS to turn on or off
the incredible surround.
» If the incredible surround is activated,
[INC SURR] (incredible surround) is
displayed.
Boost sound power
MAX SOUND gives an instant boost to the
sound power .
1 Press MAX to turn on or off the sound
power boost.
Customize sound for room
acoustics
» If MAX sound is activated, MAX is
displayed.
1 During play, press VAC repeatedly to
select a type of listening environment:
•
•
•
[HALL] (hall)
[CINEMA] (cinema)
[CONCERT] (concert)
Select a preset sound effect
The DSC (Digital Sound Control) enables you
to enjoy special sound effects.
1 During play, press DSC repeatedly to
select:
•
•
[JAZZ] (jazz)
[ROCK] (rock)
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
7 Listen to radio
3 Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confirm.
Tune to a radio station
1 Press TUN repeatedly to select FM or
» The preset number and the frequency
of the preset station are displayed.
MW.
2 Press and hold
/
for more than 2
seconds.
4 Repeat the above steps to program other
» [SEARCH] (search) is displayed.
stations.
» The radio tunes to a station with
Tip
strong reception automatically.
• To overwrite a programmed station, store another
station in its place.
3 Repeat step 2 to tune to more stations.
•
To tune to a weak station, press
/
repeatedly until you find optimal
reception.
Select a preset radio station
Program radio stations
automatically
1 In tuner mode, press ALB/PRESET+/- to
select a preset number.
You can program a maximum of 40 preset
radio stations.
Tip
• Position the antenna as far as possible from TV, VCR
or other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
1 In the tuner mode, press and hold PROG
for more than 2 seconds to activate
automatic program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
FM stations with RDS
» The first programmed radio station is
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
broadcast automatically.
If you listen to a FM station with RDS signal,
“RDS” is displayed.
Program radio stations
manually
Display RDS information
You can program a maximum of 40 preset
radio stations.
1 For a FM station with RDS, press RDS
repeatedly to display various broadcast
information.
1 Tune to a radio station. (see ‘Tune to a
radio station’ on page 17)
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Record from radio to tape
8 Record
1 Tune to the desired radio station. (see
‘Tune to a radio station’ on page 17)
Note
2 Pull at OPEN on the front panel to
open the tape button cover.
• To record, use only “Normal” (IEC type I) tapes on
which the write-protect notches (tabs) are not broken.
• When you play or record a tape, the sound source
cannot be changed.
3 Press
to open the tape door.
4 Load a tape.
5 Press to start recording.
•
•
To pause recording, press . To
resume, press this button again.
To stop recording, press
.
Auto record from CD to
tape
Tip
1 Select the disc source.
• The best recording level is set automatically. Change of
volume and sound effect does not affect recording.
• The quality of recorded sound can differ depending on
the source and the tape used.
2 Load a disc.
3 Pull at OPEN on the front panel to
open the tape button cover.
4 Press
to open the tape door.
5 Load the tape with the open side
downward and the full spool to the left.
6 Press to start recording.
» Disc play starts automatically from the
beginning of the disc.
•
To pause recording, press . To
resume recording, press this button
again.
•
To stop recording, press
.
Record a section of a disc to tape
1 During disc play, press and hold
/
to
search, then release the button.
•
To select a track, press
/
.
2 Press
to pause disc play.
3 Load a tape.
4 Press to start recording.
» Disc play resumes automatically.
•
To pause recording, press . To
resume, press this button again.
•
To stop recording, press
.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the sleep timer
9 Other features
This unit can switch to standby automatically
after a set period of time.
Set the alarm timer
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
This unit can be used as an alarm clock.The
disc, radio or USB is activated to play at a
preset time.
» When sleep timer is activated, is
displayed.
1 Ensure that you have set the clock
To deactivate sleep timer
correctly. (see ‘Set clock’ on page 12)
1 Press SLEEP repeatedly until [OFF] (off)
2 Press POWER to switch to standby
is displayed.
mode.
» When sleep timer is deactivated,
disappears on the display.
3 Press and hold TIMER for more than 2
seconds.
» A prompt to select the source is
displayed.
Karaoke
4 Press DISC 1/2/3, or TUN or USB to
select a source.
You can connect a microphone (not supplied)
and sing along with a music source.
5 Press TIMER to confirm.
» The clock digits are displayed and
begin to blink.
1 Turn MIC LEVEL 1/2 to the minimum
level.
6 Press ALB/PRESET+/- to set the hour.
2 Connect a microphone to the MIC 1/2
7 Press
/
to set the minute.
jack of the unit.
8 Press TIMER to confirm.
3 Press DISC 1/2/3, or TUN, or USB, or
MP3-LINK to select the source, and start
play.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
4 Sing through the microphone.
1 When the unit is turned on, press TIMER
•
To adjust the volume of the source,
press VOL +/-.
repeatedly.
» If the timer is activated, is displayed.
•
To adjust the volume of the
microphone, turn MIC LEVEL 1/2.
» If the timer is deactivated,
disappears.
Note
• In MP3 link mode, the alarm timer cannot be set.
Tip
• If disc/USB source is selected and the audio cannot be
played, tuner is activated automatically.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
10 Product
information
Tuning range
FM: 87.5 - 108MHz;
MW: 531 - 1602kHz
Tuning grid
50KHz (FM); 9KHz (MW)
Number of
presets
40
Note
FM
75ohm wire
loop antenna
• Product information is subject to change without prior
notice.
MW
Speakers
Specifications
Speaker Impedance
Woofer
6ohm
2 x 5.25”
2 x 1.75”
Amplifier
Tweeter
Total output power
240W RMS
Dimensions (W x H
x D)
249 x 344 x
250mm
Frequency response 60 - 16kHz
Signal-to- noise ratio >67dB A (IEC)
Weight
3.58kg each
Aux input
500mV/1000mV
General information
Disc
AC power
220 - 230V~,
50Hz
Laser type
Semiconductor
12cm/8cm
Operation power
consumption
120W
Disc diameter
Support disc
CD-DA, CD-R, CD-
RW, MP3-CD, WMA-
CD
Standby power consumption <15W
Eco Standby power
1W
consumption
Audio DAC
24Bits / 44.1kHz
USB direct
Version 2.0/1.1
Total harmonic
distortion
<1.5%
Dimensions
Main Unit (W x H x D)
265 x 310 x
403mm
Frequency
response
60Hz -16kHz (44.1kHz)
>60dBA
Weight (without speakers)
6.09kg
S/N ratio
USB playability information
Compatible USB devices:
•
•
•
USB flash memory (USB 2.0 or USB 1.1)
USB flash players (USB 2.0 or USB 1.1)
memory cards (requires an additional
card reader to work with this unit)
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported formats:
Maintenance
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
Clean the cabinet
•
•
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
•
•
WMA v9 or earlier
Directory nesting up to a maximum of 8
levels
Clean discs
• When a disc becomes dirty, clean it with
•
•
•
•
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
a cleaning cloth. Wipe the disc from the
centre out.
Unsupported formats:
•
Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
•
Do not use solvents such as benzene, thinner,
commercially available cleaners, or antistatic
spray intended for analogue records.
•
•
AAC, WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
Clean the disc lens
•
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good play quality, clean the disc lens
with Philips CD lens cleaner or any
commercially available cleaner. Follow the
instructions supplied with cleaner.
•
WMA files in Lossless format
Supported MP3 disc formats
Clean the heads and the tape paths
•
To ensure good recording and play
quality, clean the heads A, the capstan(s)
B, and pressure roller(s) C after every 50
hours of tape operation.
Use a cotton swab slightly moistened
with cleaning fluid or alcohol.
•
•
ISO9660, Joliet
Maximum title number: 999 (depending
on file name length)
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
•
•
•
•
Supported Bit-rates: 32-320 (kbps),
variable bit rates
•
•
ID3 tag v2.0 or later
Directory nesting up to a maximum of 8
levels
•
You can also clean the heads by playing a
cleaning tape once.
Demagnetise the heads
•
Use a demagnetising tape available at
your dealer.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the
sensor on the front of the main unit.
11 Troubleshooting
•
•
Warning
No disc detected
• Never remove the casing of this apparatus.
•
•
•
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome).When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
•
•
Replace or clean the disc.
Use a finalized CD or correct format disc.
Cannot display some files in USB device
•
The number of folders or files in the USB
device has exceeded a certain limit. This
phenomenon is not a malfunction.
The formats of these files are not
supported.
•
No power
USB device not supported
•
•
•
Ensure that the AC power plug of the
unit is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
•
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
•
Increase the distance between the unit
and your TV or VCR.
If the signal is too weak, adjust the
antenna or connect an external antenna
for better reception.
•
No sound or poor sound
•
•
Clock/timer setting erased
•
Adjust the volume.
Check that the speakers are connected
correctly.
Check if the stripped speaker wires are
clamped.
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
•
•
Timer does not work
•
•
Set the clock correctly.
Switch on the timer.
Left and right sound outputs reversed
•
Check the speaker connections and
location.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
•
Before you press any function button,
first select the correct source with the
remote control instead of the main unit.
Reduce the distance between the remote
control and the unit.
•
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2009 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number:
Download from Www.Somanuals.com. All Manuals Search And Download.
|