Philips Flat Panel Television 19PFL3405H 05 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
19PFL3405H/12  
22PFL3405H/12  
26PFL3405H/12  
19PFL3405H/05  
22PFL3405H/05  
26PFL3405H/05  
22PFL3415H/12  
EN  
User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Install channels  
Automatically install channels  
Manually install channels  
Rename channels  
27  
27  
28  
29  
29  
30  
Contents  
1 Notice  
2
4
Rearrange channels  
Test digital reception  
2 Important  
7 Connect devices  
Back connector  
31  
31  
32  
34  
35  
36  
37  
3 YourTV  
7
7
7
Side connector  
Side controls and indicators  
Remote control  
Connect a computer  
Use a Conditional Access Module  
Use Philips EasyLink  
Use a Kensington lock  
4 Use yourTV  
9
9
9
10  
10  
10  
Switch yourTV on / off or to standby  
Switch channels  
8 Product information  
Supported display resolutions  
Multimedia  
38  
38  
38  
38  
38  
38  
39  
39  
Watch connected devices  
AdjustTV volume  
Use teletext  
Tuner / Reception /Transmission  
Remote control  
Power  
SupportedTV mounts  
Product specification  
5 Use more of yourTV  
11  
11  
AccessTV menus  
Rename devices from the home menu 11  
Remove devices from the home menu 11  
Change picture and sound settings  
Use the universal access menu  
Use advanced teletext features  
12  
15  
15  
9 Troubleshooting  
GeneralTV issues  
TV channel issues  
Picture issues  
40  
40  
40  
40  
41  
41  
41  
41  
Create and use list of favourite channels 16  
Use the Electronic Programme Guide  
Use theTV clock  
17  
18  
19  
20  
21  
Sound issues  
HDMI connection issues  
Computer connection issues  
Contact us  
Use timers  
UseTV locks  
Use subtitles  
View photos and play music from a USB  
storage device  
22  
23  
24  
25  
25  
26  
26  
10 Index  
42  
Listen to digital radio channels  
Update theTV software  
ChangeTV preferences  
Access decoder channel  
Start aTV demo  
Reset theTV to factory settings  
EN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pixel characteristics  
1 Notice  
This LCD product has a high number of  
colour pixels. Although it has effective  
pixels of 99.999% or more, black dots or  
bright points of light (red, green or blue)  
may appear constantly on the screen.  
This is a structural property of the display  
(within common industry standards) and  
is not a malfunction.  
2010 © Koninklijke Philips Electronics N.V.All  
rights reserved.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
The material in this manual is believed  
adequate for the intended use of the system.  
If the product, or its individual modules or  
procedures, are used for purposes other than  
those specified herein, confirmation of their  
validity and suitability must be obtained. Philips  
warrants that the material itself does not  
infringe any United States patents. No further  
warranty is expressed or implied.  
Compliance with EMF  
Koninklijke Philips Electronics N.V.  
manufactures and sells many products  
targeted at consumers which, like  
any electronic apparatus, in general  
have the ability to emit and receive  
electromagnetic signals.  
One of Philips’ leading Business Principles  
is to take all necessary health and safety  
measures for our products, to comply  
with all applicable legal requirements and  
to stay well within the EMF standards  
applicable at the time of producing the  
products.  
Philips is committed to develop, produce  
and market products that cause no  
adverse health effects. Philips confirms  
that if its products are handled properly  
for their intended use, they are safe  
to use according to scientific evidence  
available today.  
Philips plays an active role in the  
development of international EMF  
and safety standards, enabling Philips  
to anticipate further developments in  
standardisation for early integration in its  
products.  
Warranty  
Risk of injury, damage to TV or void of  
warranty! Never attempt to repair the TV  
yourself.  
Use the TV and accessories only as  
intended by the manufacturer.  
The caution sign printed on the back of  
the TV indicates risk of electric shock.  
Never remove the TV cover. Always  
contact Philips Customer Support for  
service or repairs.  
Any operation expressly prohibited in  
this manual, or any adjustments and  
assembly procedures not recommended  
or authorised in this manual shall void the  
warranty.  
2
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mains fuse (UK only)  
This TV is fitted with an approved  
moulded plug. Should it become  
necessary to replace the mains fuse, this  
must be replaced with a fuse of the same  
value as indicated on the plug (example  
10A).  
1 Remove fuse cover and fuse.  
2 The replacement fuse must comply with  
BS 1362 and have the ASTA approval  
mark. If the fuse is lost, contact your  
dealer in order to verify the correct type.  
3 Refit the fuse cover.  
In order to maintain conformity to the EMC  
directive, the mains plug on this product must  
not be detached from the mains cord cable.  
Copyright  
®
Kensington and Micro Saver are registered US  
trademarks of ACCO World corporation with  
issued registrations and pending applications in  
other countries throughout the world.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
Note  
Available in selected models only.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
All other registered and unregistered  
trademarks are the property of their respective  
owners.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Risk of injury or damage to the TV!  
2 Important  
Two people are required to lift and carry  
a TV that weighs more than 25 kg.  
When stand mounting the TV, use only  
the supplied stand. Secure the stand to  
the TV tightly. Place the TV on a flat, level  
surface that can support the combined  
weight of the TV and the stand.  
When wall mounting the TV, use only a  
wall mount that can support the weight of  
the TV. Secure the wall mount to a wall  
that can support the combined weight of  
the TV and wall mount. Koninklijke Philips  
Electronics N.V. bears no responsibility  
for improper wall mounting that result in  
accident, injury or damage.  
Read and understand all instructions before you  
use yourTV. If damage is caused by failure to  
follow instructions, the warranty does not apply.  
Safety  
Risk of electric shock or fire!  
Never expose the TV to rain or water.  
Never place liquid containers, such as  
vases, near the TV. If liquids are spilt on  
or into the TV, disconnect the TV from  
the power outlet immediately. Contact  
Philips Consumer Care to have the TV  
checked before use.  
Never place the TV, remote control or  
batteries near naked flames or other heat  
sources, including direct sunlight.  
To prevent the spread of fire, keep  
candles or other flames away from the  
TV, remote control and batteries at all  
times.  
Risk of injury to children!  
Follow these precautions to prevent the  
TV from toppling over and causing injury to  
children:  
Never place the TV on a surface covered  
by a cloth or other material that can be  
pulled away.  
Ensure that no part of the TV hangs over  
the edge of the surface.  
Never place the TV on tall furniture (such  
as a bookcase) without anchoring both  
the furniture and TV to the wall or a  
suitable support.  
Educate children about the dangers of  
climbing on furniture to reach the TV.  
Risk of overheating!  
Never insert objects into the ventilation  
slots or other openings on the TV.  
When the TV is swivelled ensure that  
no strain is exerted on the power cord.  
Strain on the power cord can loosen  
connections and cause arcing.  
Never install the TV in a confined space.  
Always leave a space of at least 4 inches  
or 10 cm around the TV for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the TV.  
Risk of damage to the TV!  
Risk of short circuit or fire!  
Before you connect the TV to the power  
outlet, ensure that the power voltage  
matches the value printed on the back  
of the TV. Never connect the TV to the  
power outlet if the voltage is different.  
Never expose the remote control or  
batteries to rain, water or excessive heat.  
Avoid force coming onto power plugs.  
Loose power plugs can cause arcing or  
fire.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Risk of injury, fire or power cord damage!  
Disposal of your old product and  
batteries  
Never place the TV or any objects on the  
power cord.  
To disconnect the TV power cord easily  
from the power outlet, ensure that you  
have full access to the power cord at all  
times.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
Disconnect the TV from the power  
outlet and antenna before lightning  
storms. During lightning storms, never  
touch any part of the TV, power cord or  
antenna cable.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European Directive  
2002/96/EC. Please inform yourself about the  
local separate collection system for electrical  
and electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
Risk of hearing damage!  
Avoid using earphones or headphones at  
high volumes or for prolonged periods of  
time.  
Low temperatures  
If the TV is transported in temperatures  
below 5°C, unpack the TV and wait  
until the TV temperature matches room  
temperature before connecting the TV to  
the power outlet.  
Correct disposal of your old product helps to  
prevent potential negative consequences for  
the environment and human health.  
Screen care  
Avoid stationary images as much as  
Your product contains batteries covered by  
the European Directive 2006/66/EC, which  
cannot be disposed with normal household  
waste.  
Please inform yourself about the local rules  
on separate collection of batteries because  
correct disposal helps to prevent negative  
consequences for the environmental and  
human health.  
possible. Stationary images are images  
that remain on-screen for extended  
periods of time. Examples include:  
on-screen menus, black bars and time  
displays. If you must use stationary  
images, reduce screen contrast and  
brightness to avoid screen damage.  
Unplug the TV before cleaning.  
Clean the TV and frame with a soft,  
damp cloth. Never use substances such as  
alcohol, chemicals or household cleaners  
on the TV.  
Risk of damage to the TV screen! Never  
touch, push, rub or strike the screen with  
any object.  
To avoid deformations and colour fading,  
wipe off water drops as soon as possible.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Energy efficiency features  
ECO-Green  
Energy saving  
The energy saving setting of the TV  
combines several TV settings that result  
in saving energy. See the smart settings in  
the setup menu.  
Low standby power consumption  
The class-leading and highly advanced  
power circuitry brings down the power  
consumption of the TV to an extremely  
low level, without losing out on the  
constant standby functionality.  
Power management (Available in selected  
models only)  
High energy efficiency  
The advanced power management of this TV  
ensures the most efficient use of its energy.  
You can check how your personal TV settings,  
the level of brightness in current onscreen  
pictures and the surrounding light conditions  
determine the relative power consumption.  
End of use  
To inform yourself on the correct disposal  
of the TV and batteries, refer to ‘Disposal of  
your old product and batteries’ in the user  
manual (see ‘Disposal of your old product and  
batteries’ on page 5).  
Low standby power  
Designed to facilitate recycling  
Philips continuously focuses on lowering  
the environmental impact of its innovative  
consumer products. We aim our efforts  
towards environmental improvements  
during manufacturing, reduction of harmful  
substances, energy-efficient use, end-of-life  
instructions and product recycling.  
Thanks to our environmental effort, this TV  
has been awarded the European Ecolabel –the  
You can find detailed information on standby  
energy consumption, warranty policy, spare  
parts and recycling of this TV on the Philips  
This TV has features that contribute to  
energy-efficient use. This TV was awarded  
the European Ecolabel for its environmental  
qualities.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
3 YourTV  
1
2
3
4
5
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register yourTV at  
22  
21  
20  
6
7
This section gives you an overview of  
commonly usedTV controls and functions.  
19  
8
9
18  
17  
Side controls and indicators  
10  
11  
1
2
3
16  
12  
13  
14  
4
15  
5
a
b
+/-: Increases or decreases volume.  
(Home): Toggles the home menu on  
or off.  
a
b
(Standby-On)  
c P/CH +/-: Switches to the next or  
Switches the TV to standby if it is on.  
Switches on the TV if it is in standby.  
previous channel.  
d
(Power): Switches the product on  
or off. The product is not powered  
off completely unless it is physically  
unplugged.  
MENU  
Toggles the main menu on or off.  
c MHEG/TELETEXT  
Toggles teletext on or off.  
e Remote control sensor.  
d
SOURCE  
Selects connected devices.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
e Colour buttons  
r
GUIDE  
Selects tasks or options.  
Switches between channel grid and  
programme list.  
f AD (Audio Descriptor) (For RF Digital  
TV only)  
s SUBTITLE (For RF Digital TV only)  
UK only: Enables audio commentary for  
the visually handicapped.  
Enables or disables subtitles.  
t DEMO (Used in selected models only)  
Toggles the demonstration menu on or  
off.  
g
OPTIONS  
Accesses options relating to the current  
activity or selection.  
u
FORMAT  
Selects a picture format.  
h OK  
Confirms an entry or selection and  
v
INCR. SURR  
displays the channel grid, when watching  
TV.  
Enables Incredible Surround for stereo  
sources. Enables spatial mode for mono  
sources.  
i
j
(Navigation buttons)  
Navigates menus.  
Remote control usage  
When using the remote control, hold it close  
to the TV and point it at the remote control  
sensor. Make sure that the line-of-sight  
between the remote control and TV is not  
blocked by furniture, walls or other objects.  
INFO  
Displays program information, when  
available. If the information spans multiple  
pages, press OPTIONS to go to the next  
page.  
k
(Mute)  
Mutes or restores volume.  
l P +/- (Programme +/-)  
Switches to the next or previous channel.  
When the TV menu is on, this functions  
as Page Up / Down.  
~5m  
~30˚  
m 0-9 (Numeric buttons)  
Selects a channel or setting.  
n
o
p
q
PICTURE (Smart picture)  
Launches the picture menu.  
SOUND (Smart Sound)  
Launches the sound menu.  
+/- (Volume +/-)  
Increases or decreases volume.  
BACK P/P (Previous channel)  
Returns to a previous screen.  
Returns to the previously viewed  
channel.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
4 Use yourTV  
If you cannot locate your remote control and  
want to switch on the TV from standby, press  
P/CH +/- on the side of the TV.  
This section helps you perform basicTV  
operations.  
Switch channels  
Switch yourTV on / off or to  
standby  
Press P +/- on the remote control or  
P/CH +/- on the side of the TV.  
Enter a channel number using the  
Numeric buttons.  
Press OK to use the channel grid.  
Press  
BACK P/P on the remote  
control to return to the previous channel.  
Note  
When you use a favourite list, you can only  
select those channels in the list (see ‘Select a  
favourite list’ on page 16).  
To switch on  
Switch channels with the channel grid  
The channel grid allows you to view all  
available channels in a grid format.  
If the standby indicator is off, press  
(Power) at the side of the TV.  
If the standby indicator is red, press  
(Standby-On) on the remote control.  
To switch to standby  
Press (Standby-On) on the remote  
control.  
» The standby indicator switches to red.  
To switch off  
Press (Power) at the side of the TV.  
» The standby indicator switches off.  
1 Press OK.  
» The channel grid appears.  
Tip  
2 Press  
to browse the channel grid.  
3 Press OK to select a channel.  
Though your TV consumes very little power  
when in standby, energy continues to be  
consumed. When not in use for an extended  
period of time, disconnect the TV power cable  
from the power outlet.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watch connected devices  
Use teletext  
Note  
Switch on the device before selecting it as a  
source on the TV.  
Use the source button  
1 Press MHEG/TELETEXT.  
» The main index page appears.  
2 Select a page as follows:  
Press the Numeric buttons to enter  
a page number  
Press P +/- to view the next or  
previous page  
Press the Colour buttons to select a  
colour coded item  
1 Press  
SOURCE.  
» The source list appears.  
Press  
BACK to return to a  
2 Press  
to select a device.  
previously viewed page  
3 Press OK to confirm your choice.  
» TheTV switches to the selected  
device.  
3 Press MHEG/TELETEXT to exit teletext.  
AdjustTV volume  
To increase or decrease volume  
Press  
+/-.  
To mute or unmute sound  
Press to mute the sound.  
Press again to restore the sound.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rename devices from the  
home menu  
5 Use more of  
yourTV  
After adding a new device to the home menu,  
you can rename it to your preference.  
1 Press MENU.  
AccessTV menus  
2 Press  
to select a device to rename.  
Menus help you to install channels, change  
picture and sound settings and access other  
features.  
3 Press OPTIONS.  
» The options menu appears.  
4 Press  
to select [Rename device], then  
press OK.  
» A text input box appears.  
1 Press MENU.  
» The menu screen appears.  
5 Press  
to select characters.  
6 Press OK to confirm each character.  
Add new device  
Setup  
Watch TV  
7 Select [Done], then press OK to finish  
renaming devices.  
Note  
The device name can be up to 16 characters  
long.  
Press [Aa] to change an uppercase letter to a  
lowercase letter and vice versa.  
2 Press  
to select and navigate  
through one of the following menus.  
[Watch TV]: Switches back to the  
aerial source if another source is  
selected.  
Remove devices from the  
home menu  
[Add new device]: Adds new devices  
to the home menu.  
[Setup]: Accesses menus to change  
picture, sound and other settings.  
If a device is no longer connected to theTV,  
remove it from the home menu.  
1 Press MENU.  
3 Press OK to confirm your choice.  
2 Press  
to select a device to remove.  
4 Press MENU to exit.  
3 Press OPTIONS.  
4 Press  
to select [Remove device], then  
Tip  
press OK.  
After selecting [Add new device], follow the  
on-screen instructions to select the correct  
device and connector.  
5 Select [Remove], then press OK.  
» The selected device is removed from  
the home menu.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Energy saving]: Applies low-energy  
settings.  
[Natural]: Applies the best picture  
quality.  
[Custom]: Lists customised picture  
settings.  
Change picture and sound  
settings  
Change picture and sound settings to suit your  
preferences.You can apply pre-defined settings  
or change settings manually.  
3 Press OK to confirm your choice.  
» The selected smart picture setting is  
applied.  
Note  
When watching TV or using external devices,  
press OPTIONS then select [Picture and  
sound] for quick access to picture and sound  
settings.  
Manually adjust picture settings  
1 Press MENU.  
2 Press  
to select [Setup] >  
Use settings assistant  
[Picture].  
3 Press  
to select the following  
Use the settings assistant to guide you through  
the picture and sound settings.  
settings.  
[Smart picture]: Accesses pre-defined  
smart picture settings.  
[Video contrast]: Adjusts the intensity  
of video contents, keeping backlight  
unchanged.  
1 Press MENU.  
2 Press  
to select [Setup] > [Picture]  
> [Settings assistant].  
3 Press OK.  
» The [Settings assistant] menu appears.  
Follow the on-screen instructions to  
choose your preferred picture settings.  
[Contrast]: Adjusts the intensity of  
backlight areas, keeping video contents  
unchanged.  
[Brightness]: Adjusts the intensity and  
details of dark areas.  
Use smart picture  
Use smart picture to apply pre-defined  
picture settings.  
[Colour]: Adjusts colour saturation.  
[Hue]: Compensates for colour variations.  
[Sharpness]: Adjusts sharpness in the  
image.  
1 Press PICTURE.  
[Noise reduction]: Filters and reduces  
noise in an image.  
[Tint]: Adjusts the colour balance in an  
image.  
[Custom tint]: Customises tint setting.  
(Only available if [Tint] > [Custom] is  
selected)  
[Digital Crystal Clear]: Fine-tunes each  
pixel to match surrounding pixels. This  
produces a brilliant, high-definition image.  
» The [Smart picture] menu appears.  
2 Press  
to select one of the following  
settings.  
[Personal]: Applies the settings set in  
[Settings assistant] menu.  
[Vivid]: Applies rich and dynamic  
settings.  
[Standard]: Adjusts picture settings  
to suit most environments and types  
of video.  
[Dynamic contrast]: Enhances  
contrast. A [Medium] setting is  
recommended.  
[Cinema]: Applies settings for movie  
viewing.  
[Game]: Applies settings for games.  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Dynamic backlight]: Adjusts  
brightness of the TV backlight to  
match lighting conditions.  
[MPEG artifact reduction]:  
Smoothes out transitions on digital  
pictures. You can switch this feature  
on or off.  
[Colour enhancement]: Makes  
colours more vivid and improves  
the details in bright colours. You can  
switch this feature on or off.  
[Auto format]: (Not for  
PC mode.) Enlarges the  
picture automatically to  
best fit the screen. The  
subtitles remain visible.  
[Super zoom]: (Not  
for HD and PC mode.)  
Removes the black bars on  
the side of 4:3 broadcasts.  
There is minimal  
distortion.  
[PC mode]: Adjusts the picture when a  
PC is connected to the TV via HDMI or  
DVI.  
[4:3]: Shows the classic 4:3  
format.  
[Picture format]: Changes the picture  
format.  
[Subtitle zoom]: Displays  
4:3 pictures over the full  
area of the screen, with  
sub-titles visible. Part of  
the top of the picture is  
clipped off.  
[Movie expand 14:9]: (Not  
for HD and PC mode.)  
Scales 4:3 format to 14:9.  
[Picture size]: Adjusts the viewing area.  
(when set to maximum, you might see  
noise or a rough edge of an image.)  
[Horizontal shift]: Adjusts the picture  
horizontally for PC-VGA, DVI, HDMI or  
YPbPr.  
[Vertical shift]: Adjusts the picture  
vertically for PC-VGA, DVI, HDMI or  
YPbPr.  
[Movie expand 16:9]:  
(Not for HD and PC  
mode.) Scales 4:3 format  
to 16:9.  
[Wide screen]: Scales 4:3  
format to 16:9.  
Change picture format  
1 Press  
FORMAT.  
» A picture format bar appears.  
2 Press  
to select a picture format.  
» The selected picture format is  
activated.  
[Unscaled]: For HD  
and PC mode only,  
and in selected models  
only. Allows maximum  
sharpness. Some  
distortion may be present  
due to the broadcaster’s  
systems. Set your PC  
resolution to wide screen  
mode for best results.  
3 Press OK to confirm your choice.  
Summary of picture formats  
The following picture settings can be  
configured.  
Note  
Depending on the format of the picture  
source, some picture settings are not available.  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Balance]: Adjusts the balance of the right  
and left speakers.  
[Audio language]: Available for digital  
channels, when multiple languages are  
broadcast. Lists available audio languages.  
[Dual I-II]: Selects audio languages if dual  
sound broadcast is available.  
[Mono/Stereo]: Selects mono or stereo if  
stereo broadcast is available.  
[TV speakers]: Turns TV speakers on or  
off. (Available only when you switch on  
Easylink).  
Use smart sound  
Use smart sound to apply pre-defined sound  
settings.  
1 Press SOUND.  
» The [Smart sound] menu appears.  
2 Press  
to select the following settings.  
[Custom]: Applies the settings that  
were customised in the sound menu.  
[Standard]: Adjusts sound settings  
to suit most environments and types  
of audio.  
[Surround]: Enables spatial sound.  
[Headphone volume]: Adjusts headphone  
volume.  
[News]: Applies settings for spoken  
audio, such as news.  
[Movie]: Applies settings for movies.  
[Auto volume levelling]: Automatically  
reduces sudden volume changes, for  
example, when switching channels.  
[Delta volume]: Levels out volume  
differences between channels or  
connected devices. Switch to the  
connected device before you change the  
delta volume.  
3 Press OK to confirm your choice.  
» The selected smart sound setting is  
applied.  
Manually adjust sound settings  
1 Press MENU.  
[SPDIF OUT]: Selects the type of digital  
audio output.  
2 Press  
to select [Setup] > [Sound].  
» The [Sound] menu appears.  
[PCM]: Converts non-PCM audio to  
PCM audio.  
[Multichannel]: Outputs audio to the  
home theater.  
3 Press  
to select the following  
settings.  
[Smart sound]: Accesses pre-defined  
smart sound settings.  
[Bass]: Adjusts the bass level.  
[Treble]: Adjusts the treble level.  
[Digital audio lipsync]: Enables or disables  
lipsync audio output. When this is  
enabled, the TV synchronises the audio  
and video performance. When disabled,  
you need to adjust the lipsync audio  
feature on the external device that is  
connected to the TV. (Only available with  
SPDIF connection)  
[Volume]: Adjusts the volume.  
[Volume visually impaired]: Sets the mix  
of visually impaired audio with regular  
audio. When available, visually impaired  
audio includes audio descriptions of on-  
screen action. You can also enable this by  
pressing AD (Audio Descriptor). (Only  
applicable for the UK region.)  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use the universal access  
menu  
Use advanced teletext  
features  
You can activate the universal access menu  
during the first installation. Once enabled, you  
can quickly access the visually impaired and  
hearing impaired menus when watching TV or  
external devices.  
Access the teletext options menu  
Access the teletext features through the  
teletext options menu.  
1 Press MHEG/TELETEXT.  
» The teletext screen appears.  
Tip  
2 Press OPTIONS.  
You can also enable the universal access  
menu by selecting [Setup] > [Installation] >  
[Preferences] > [Universal access] > [On].  
» The teletext options menu appears.  
3 Press  
to select one of the following  
options.  
1 When watching TV, press OPTIONS.  
[Reveal]: Hides or reveals hidden  
information on a page, such as  
solutions to riddles or puzzles.  
[Cycle subpage]: Cycles through  
subpages automatically if subpages  
are available.  
[Language]: Switches to a different  
language group to display a language  
correctly when it uses a different  
character set.  
» TheTV options menu appears.  
2 Select [Universal access], then press OK  
or to enter.  
3 Press  
to select one of the following  
options and press OK to enter.  
[Hearing impaired]: Enables or  
disables hearing impaired subtitles.  
[Visually impaired]: Selects speaker,  
headphone or both for [Volume  
visually impaired] audio. Select [Off]  
to disable audio descriptor. (Only  
applicable to the UK region).  
[Volume visually impaired]: Adjusts  
the volume of visually impaired  
audio.  
[Freeze page]: Freezes the current  
page.  
[Dual screen] / [Full Screen]: Enables  
and disables dual screen teletext.  
4 Press  
to make a selection, then  
press OK to confirm.  
5 Press  
BACK to exit the teletext  
options menu.  
Tip  
Press the colour buttons on the remote  
control to enter the options.  
Select teletext subpages  
A teletext page can hold several subpages.  
Subpages are displayed on a bar next to the  
main page number.  
1 Press MHEG/TELETEXT .  
» The teletext screen appears.  
2 Press  
to select a teletext page.  
to enter a subpage.  
3 Press  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SelectT.O.P. teletext broadcasts  
View all channels  
Table Of Pages (T.O.P.) teletext broadcasts  
allow you to jump from one subject to  
another without using page numbers. T.O.P.  
teletext is not broadcast on all TV channels.  
You can exit a favourite list, and view all  
installed channels.  
1 When watching TV, press OK.  
» The channel grid appears.  
1 Press MHEG/TELETEXT.  
2 Press OPTIONS.  
» The teletext screen appears.  
» The channel options menu appears.  
2 Press INFO.  
3 Press  
to select [Select list], then  
» TheT.O.P. overview appears.  
press OK or to enter.  
3 Press  
to select a subject.  
4 Select [All], then press OK.  
» All channels are displayed in the  
channel grid.  
4 Press OK to view the page.  
Note  
Create and use list of  
favourite channels  
All favourite channels are marked by an  
asterisk when you view the channel grid.  
You can create a list of your preferredTV  
channels so that you can find those channels  
easily.  
Add a channel to a favourite list  
Tip  
Select a favourite list  
View all channels before adding a channel to a  
favourite list.  
1 When watching TV, press OK to display  
the channel grid.  
2 Press OPTIONS.  
1 When watching TV, press OK.  
» The channel options menu appears.  
» The channel grid appears.  
3 Press  
to select [Select list], then  
2 Press  
to select a channel to add to  
press OK to enter.  
a favourite list.  
» The channel list options appear.  
3 Press OPTIONS.  
4 Select [Favourite], then press OK.  
» Only channels in the favourite list  
appear in the channel grid.  
» The channel options menu appears.  
4 Select [Mark as favourite], then press  
OK.  
» The channel is added to the favourite  
Note  
list.  
The favourite channel grid is empty until you  
add channels into the favourite lists.  
Note  
All favourite channels are marked by an  
asterisk in the channel grid.  
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove a channel from a favourite  
list  
Use EPG  
1 When watching TV, press GUIDE.  
» The EPG planner screen appears.  
1 When watching TV, press OK.  
» The channel grid appears.  
2 Press MENU.  
» The program guide menu appears.  
2 Press  
to select a channel to  
remove.  
3 Press  
to select an option, and then  
3 Press OPTIONS.  
press OK to confirm.  
4 Select [Unmark as favourite], then press  
4 Press MENU to exit the EPG menu.  
OK.  
Note  
» The channel is removed.  
Only the channels in the [Preferred EPG  
channels] list appear in the EPG menu.  
Use the Electronic  
Programme Guide  
Use the EPG options menu  
EPG is an on-screen guide available for digital  
channels. EPG allows you to:  
Use the EPG options menu to set or clear  
reminders, change day and access other useful  
EPG options.  
View a list of digital programmes being  
broadcast  
View upcoming programmes  
Group programmes by genre  
Set reminders when programmes start  
Set up preferred EPG channels  
1 Press GUIDE.  
2 Press OPTIONS.  
» The EPG menu appears.  
3 Press  
to select one of the following  
options.  
[Set remind] / [Clear remind]: Sets  
or clears programme reminders.  
[Change day]: Sets the EPG day.  
[Show info]: Displays programme  
information.  
Switch on EPG  
1 When watching TV, press GUIDE.  
» The EPG planner screen appears  
displaying information about the  
scheduled programmes.  
[Search by genre]: Searches TV  
programmes by genre.  
[Scheduled reminders]: Lists  
programme reminders. Only  
available for upcoming programmes.  
[Preferred EPG channels]: Sets  
preferred EPG channels.  
Note  
EPG data is available only in selected countries  
and can take some time to load.  
Tip  
4 Press OK to enter or activate the option.  
Press GUIDE to switch between EPG and  
5 Press  
BACK to exit the EPG menu.  
channel grid.  
Tip  
Press GUIDE to switch between EPG and  
channel grid.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Change the clock mode  
Use theTV clock  
1 Press MENU.  
You can display a clock on theTV screen.The  
clock displays the current time using time data  
received from yourTV service operator.  
2 Press  
to select [Setup] >  
[Installation] > [Clock] > [Auto clock  
mode].  
3 Press  
to select [Automatic] or  
Set theTV clock manually  
[Manual].  
In some countries, you need to set TV clock  
manually.  
4 Press OK to confirm.  
1 Press MENU.  
Change the time zone  
2 Select [Setup] > [Features] > [Clock].  
1 Press MENU.  
» The [Clock] menu appears.  
2 Press  
to select [Setup] >  
[Installation] > [Clock] > [Time zone].  
to select your time zone.  
3 Press  
to enter time.  
4 Select [Done] to confirm.  
3 Press  
5 Press MENU to exit.  
4 Press OK to confirm.  
Note  
Note  
If your selected country supports digital  
broadcast, the clock displays the time data  
from your TV service operator as priority.  
This option is only available if you select [Auto  
clock mode] > [Manual] (in countries with  
clock transmission data).  
Display theTV clock  
Use daylight saving  
1 When watching TV, press OPTIONS.  
1 Press MENU.  
» TheTV option menu appears.  
2 Press  
to select [Setup] >  
2 Select [Clock].  
[Installation] > [Clock] > [Daylight  
saving].  
3 Press OK.  
3 Press OK or to enter [Daylight saving].  
Note  
4 Press  
to select [Standard time] or  
[Daylight saving time].  
To disable the clock, repeat the above  
procedure.  
5 Press OK to confirm.  
Note  
This option is only available if you select [Auto  
clock mode] > [Manual].  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Automatically switch theTV on (on  
timer)  
You can switch the TV to a specified channel  
at a specified time, from standby or power-on  
mode.  
Use timers  
You can set timers to switch theTV to standby  
at a specified time.  
Tip  
1 Press MENU.  
Set the TV clock before you use timers.  
2 Press  
to select [Setup] >  
[Features] > [On timer].  
3 Press to enter the [On timer] menu.  
Automatically switch theTV to  
standby (sleep timer)  
Sleep timer switches the TV to standby after a  
pre-defined period of time.  
[Activate]: Selects how often the TV  
is switched on.  
[Time]: Sets the time to switch on  
the TV.  
[Programme no.]: Selects the  
channel or the connected device.  
Tip  
4 Press MENU to exit.  
You can switch off your TV earlier or reset the  
sleep timer during the countdown.  
Tip  
1 Press MENU.  
Select [On timer] > [Activate] > [Off] to  
disable this feature.  
2 Press  
to select [Setup] >  
[Features] > [Sleep timer].  
» The [Sleep timer] menu appears.  
3 Press  
to select a value between zero  
and 180 minutes.  
» The sleep timer can be set in steps of  
five minutes. If set to zero, the sleep  
timer is switched off.  
4 Press OK to switch on the sleep timer.  
» TheTV switches to standby after the  
specified time.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lock or unlock one or more channels  
UseTV locks  
1 When watching TV, press OK to display  
You can prevent your children from watching  
certain programmes or channels by locking the  
TV controls.  
the channel grid.  
2 Press  
to select a channel to lock or  
unlock.  
3 Press OPTIONS.  
Set or change your PIN code  
4 Press  
to select [Lock channel] or  
1 Press MENU.  
[Unlock channel].  
2 Press  
to select [Setup] >  
5 For each selection, press OK to lock or  
[Features] > [Set code] / [Change code].  
» The [Set code] / [Change code] menu  
appears.  
unlock the channel.  
» The first time you lock or unlock a  
channel, you are prompted to enter  
your PIN code.  
3 Enter your code using the Numeric  
buttons.  
6 Enter your code and press OK.  
» If the channel is locked, a lock icon is  
displayed.  
» Follow the on-screen instructions to  
create or change your PIN code.  
Tip  
7 Repeat the process to lock or unlock  
more channels.  
If you forget your code, enter ‘8888’ to  
override any existing codes.  
Note  
Switch the TV off and on again for the change  
to take effect.  
Lock or unlock theTV  
Lock the TV to prevent access to all channels  
and connected devices.  
If you use P +/- on your remote control to  
switch between channels, the locked channels  
are skipped.  
If you access the locked channels from the  
channel grid, you are prompted to enter your  
PIN code.  
1 Press MENU.  
2 Press  
to select [Setup] >  
[Features] > [TV lock].  
» You are prompted to enter your PIN  
Set parental ratings  
code.  
Some digital broadcasters rate their  
3 Enter your code using Numeric buttons.  
programmes according to age. You can set  
your TV to display only programmes with age  
ratings higher than your child’s age.  
» The [TV lock] menu appears.  
4 Press  
to select [Lock] or [Unlock].  
5 Press OK to confirm.  
1 Press MENU.  
» All channels and connected devices are  
locked or unlocked.  
2 Press  
to select [Setup] >  
[Features] > [Parental rating].  
» A code setup screen appears.  
6 Press MENU to exit.  
3 Enter your code using Numeric buttons.  
Note  
» The parental rating menu appears.  
Switch the TV off and on again for the change  
to take effect.  
4 Press  
to select an age rating.  
5 Press OK to confirm.  
If you select [Lock], you have to enter your  
code every time you turn on your TV.  
6 Press MENU to exit.  
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select a subtitle language on digitalTV  
channels  
Use subtitles  
You can enable subtitles for eachTV channel.  
Subtitles are broadcast via teletext or DVB-T  
digital broadcasts.With digital broadcasts, you  
can select a subtitle language.  
Note  
When you select a subtitle language on  
a digital TV channel as described below,  
the preferred subtitle language set in the  
installation menu is temporarily overruled.  
Enable subtitles on analogueTV  
channels  
1 Press MENU.  
1 Select an analogue TV channel.  
2 Press  
to select [Setup] >  
[Features] > [Subtitle language].  
2 Press MHEG/TELETEXT.  
3 Press OK or to enter the list of  
3 Enter the three-digit page number of the  
available languages.  
subtitle page with the Numeric buttons.  
4 Press  
to select a subtitle language.  
5 Press OK to confirm.  
4 Press MHEG/TELETEXT to switch off  
teletext.  
5 Press SUBTITLE.  
Tip  
» The [Subtitle mode] menu appears.  
You can also access the [Subtitle language]  
menu while watching TV by pressing  
OPTIONS > [Subtitle language].  
6 Select [On] to display subtitles always or  
[On during mute] to display subtitles only  
when audio is muted.  
7 Press OK to enable subtitles.  
8 Repeat this procedure to enable subtitles  
on each analogue channel.  
Tip  
Select [Subtitle mode] > [Off] to disable  
subtitles.  
Enable subtitles on digitalTV channels  
1 When watching digital channels, press  
SUBTITLE.  
» The [Subtitle mode] menu appears.  
2 Select [On] to display subtitles always or  
[On during mute] to display subtitles only  
when audio is muted.  
3 Press OK to enable subtitles.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
View a slide show of your photos  
View photos and play music  
from a USB storage device  
1 When a full screen image of a photo is  
displayed, press OK.  
» A slide show begins from the selected  
photo.  
Caution  
Philips is not responsible if the USB storage  
device is not supported, nor is it responsible  
for damage or loss of data from the device.  
2 Press the following buttons to control the  
slide show:  
OK to pause the slide show.  
to go back or move forward to  
the next image.  
Use the USB connector to view photos or  
listen to music stored on a USB storage device.  
BACK to stop the slide show.  
1 Turn on the TV.  
2 Connect the USB storage device to the  
TV.  
Change slide show settings  
1 When viewing a slide show, press  
» The home menu appears.  
3 Press  
to select [Browse USB].  
4 Press OK to confirm.  
OPTIONS.  
» The slide show options menu appears.  
» The USB thumbnail browser appears.  
2 Press  
to select one of the following.  
[Start Slideshow] / [Stop Slideshow]:  
Starts or stops a slide show.  
[Slideshow transitions]: Sets the  
transition from one picture to the  
next.  
Tip  
Press GUIDE to switch between thumbnail  
and file browsing views.  
[Slideshow frequency]: Sets the  
amount of time that a picture is  
shown.  
[Rotate image]: Rotates a picture.  
[Show info]: Displays the picture  
name, date, size and next picture in  
the slide show.  
View photos  
1 In the USB browser, press to enter the  
[Picture] folder.  
2 Press  
to select a photo or a photo  
album.  
3 Press OK to confirm your setting.  
3 Press OK to view a full screen image of  
the photo.  
Note  
Tip  
[Rotate image] and [Show info] appear only  
when you press OK to pause the slideshow.  
When in full screen mode, press  
between photos.  
to move  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listen to music  
Disconnect a USB storage device  
1 In the USB thumbnail browser view,  
Caution  
select [Music] and press to enter.  
Press GUIDE to switch between  
thumbnail and file browsing views.  
Follow this procedure to avoid damage to your  
USB storage device.  
2 Press  
to select a music track or  
1 Press  
BACK to exit the USB browser.  
2 Wait for five seconds then disconnect the  
album.  
3 Press OK to play the selected music.  
USB storage device.  
Button  
Function  
OK  
Pause, resume play or stop  
playback.  
Listen to digital radio  
channels  
/
Go to the previous or next  
music.  
If digital broadcasting is available, digital radio  
channels are installed automatically during  
installation.  
Music settings  
1 When watching TV, press OK to display  
When listening to music, press OPTIONS  
to access one of the following music settings.  
the channel grid.  
[Start playback] / [Stop playback]: Starts  
or stops the music.  
[Repeat] / [Play once]: Repeats a song. /  
Disables repeat play and plays a song or  
album once.  
2 Press OPTIONS.  
3 Press  
to select [Select list] > [Radio].  
» The radio channel grid appears.  
4 Press  
to select a radio channel and  
press OK to listen.  
[Shuffle on] / [Shuffle off]: Enables or  
disables random play of songs.  
[Show info]: Displays the file name.  
[TV speakers] (Available only when you  
activate Easylink): Sets the TV speakers  
on or off.  
Note  
Select [Select list] > [All] to exit radio  
channels and view all channels.  
[Sound]: Adjusts the sound setting.  
View a slideshow with music  
You can view a picture slide show with  
background music.  
1 Select an album of songs.  
2 Press OK.  
3 Press  
BACK to return to the USB  
content browser.  
4 Select an album of pictures.  
5 Press OK.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Update using a USB device  
Connect your USB storage device to the TV.  
1 If the software update screen does not  
appear automatically, select [Setup] >  
[Software update] > [Local updates] >  
[USB].  
Update theTV software  
Philips continuously tries to improve its  
products and we recommend that you update  
theTV software when updates are available.  
2 Press OK to update the TV software  
Check the current software version  
manually.  
1 Press MENU.  
3 Follow the on-screen instructions to  
complete the update.  
2 Press  
to select [Setup] >  
[Software update] > [Current software  
Note  
inf].  
» TheTV displays the current software  
The TV restarts after the software update is  
complete.  
information.  
Download the software  
Update using OAD  
1 On your PC, open a web browser and go  
1 If using (DVB-T) digital broadcast, your  
TV automatically receives software  
updates. If you receive a message on  
your screen asking you to update your  
software:  
2 Download the latest software upgrade  
file to your PC.  
3 Decompress the ZIP-file.  
Select [Update now] to update the  
software immediately.  
4 Copy the autorun.upg file to the root  
directory of the USB device.  
Select [Remind me later] to exit the  
update screen at that time and be  
reminded later.  
Update software  
You can update the TV software via a USB  
storage device or OAD (Over the Air  
software Download).  
Select [Cancel] to skip the update.  
2 If you select [Cancel], you can manually  
access the OAD update by selecting  
[Setup] > [Software update] > [Local  
updates] > [OAD].  
3 Select the available version of OAD and  
press OK.  
4 Follow the on-screen instructions to start  
the update.  
Note  
The TV restarts after the software update is  
complete.  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ChangeTV preferences  
Access decoder channel  
Use the preferences menu to customise your  
TV settings.  
You can map channels provided through a  
decoder or descrambler to yourTV channel  
selection. In this way, you can select these  
channels by using the RC of yourTV.The  
decoder or a descrambler must be connected  
to EXT1 (SCART).  
1 Press MENU.  
2 Select [Setup] > [Installation] >  
[Preferences].  
[Location]: Optimises TV settings for  
your location - home or shop.  
[Volume bar]: Displays the volume  
bar when you adjust the volume.  
[Channel Information]: Displays  
information about the TV channel  
every time you switch channels.  
Select [Full] to view channel  
Set decoder channel  
Map channels from a decoder or descrambler.  
1 Press MENU.  
2 Select [Setup] > [Installation] >  
[Decoder].  
information or [Off] to turn off the  
channel information.  
3 Press to enter [Decoder] menu.  
4 Press  
to select [Channel], then press  
[Universal access]: Enables or  
disables the universal access menu.  
[EasyLink]: Enables one-touch play  
and one-touch standby between  
EasyLink-compliant devices.  
to enter.  
5 Select one channel to map to the  
decoder / descrambler channel and press  
OK to confirm.  
[Pixel Plus Link]: Overrides the  
settings of connected devices and  
uses the settings of the TV. (Available  
only when you activate Easylink).  
[E-sticker]: For shop mode only. Sets  
the location of the e-sticker.  
6 Select [Status], then press to enter.  
7 Select [EXT 1] (SCART) the connector  
used by the decoder / descrambler.  
8 Press OK.  
9 Press MENU to exit.  
3 Press  
to select your preference.  
Note  
4 Press OK.  
Select [None] if you do not want to map to  
5 Press MENU to exit.  
the decoder / descrambler channel.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start aTV demo  
You can use demonstrations to better  
understand the features of your TV. Some  
demos are not available on certain models.  
Available demos are displayed in the menu list.  
1 Press DEMO on the remote control.  
2 Press  
to select a demo and press OK  
to view it.  
3 Press DEMO to exit.  
Reset theTV to factory  
settings  
You can restore the default picture and sound  
settings of yourTV.The channel installation  
settings remain the same.  
1 Press MENU.  
2 Select [Setup] > [Installation] > [Factory  
settings].  
3 Press to enter [Factory settings].  
4 Select [Reset] to start resetting.  
5 Press OK.  
6 Press MENU to exit.  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 Install channels  
Automatically installs the available analogue  
and digital TV channels and digital radio  
channels.  
6 Install channels  
The first time you set up yourTV, you are  
prompted to select a menu language and to  
installTV and digital radio channels (if available).  
This chapter provides instructions on how to  
re-install and fine tune channels.  
1 From the channel installation guide  
screen, select [Full installation].  
2 Press OK to confirm.  
» TheTV starts to search and store all  
the available channels.  
3 When installation is complete, press OK  
Automatically install channels  
to exit the installation menu.  
This section describes how to search and store  
channels automatically.  
Update the channel list  
You can enable automatic update of channels  
when your TV is in standby mode. The  
channels stored in your TV are updated every  
morning according to the channel information  
in the broadcast.  
Step 1 Select your menu language  
1 Press MENU.  
2 Press  
to select [Setup] >  
[Installation] > [Language] > [Menu  
1 Press MENU.  
language].  
2 Press  
to select [Setup] >  
3 Press OK or to enter [Menu language].  
[Installation] > [Channel installation] >  
4 Press  
to select a language.  
5 Press OK to confirm.  
[Standby update].  
3 Select [On] to enable the automatic  
update or select [Off] to disable it.  
6 Press to return to [Installation] menu.  
Step 2 Select your country  
Select the country where you are installing the  
TV. The available channels for the country are  
installed on the TV.  
1 Press MENU.  
2 Press  
to select [Setup] >  
[Installation] > [Channel installation] >  
[Automatic channel search].  
3 Press OK or to enter the menu.  
» The country menu appears.  
4 Press  
to select your country.  
5 Press OK to confirm your choice.  
» The channel installation guide appears  
on the screen.  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manually install channels  
6 Press  
BACK when the new channel is  
found.  
This section describes how to search and store  
analogueTV channels manually.  
7 Press  
to select [Store as new  
channel] to store the new channel under  
a new channel number.  
Step 1 Select your system  
8 Press OK to enter [Store as new  
channel], then press OK.  
Note  
9 Press to return to the [Channel  
installation] menu.  
Skip this step if your system settings are  
correct.  
Step 3 Fine-tune analogue channels  
1 Press MENU.  
1 Press MENU.  
2 Press  
to select [Setup] >  
2 Press  
to select [Setup] >  
[Installation] > [Channel installation] >  
[Analogue: manual install].  
» The [Analogue: manual install] menu  
appears.  
[Installation] > [Channel installation] >  
[Analogue: manual install].  
» The [Analogue: manual install] menu  
appears.  
3 Press  
to select [System], then press  
3 Press  
to select [Fine tune], then press  
to enter.  
to adjust frequency.  
to enter.  
4 Press  
to select your country or  
4 Press  
region.  
5 Press OK to confirm.  
5 Press OK to confirm.  
6 Press  
to select [Store current  
6 Press to return to [Channel  
channel] to store the channel number.  
installation] menu.  
7 Press to enter [Store current channel],  
then press OK.  
Step 2 Search and store newTV  
channels  
8 Press to return to the [Channel  
installation] menu.  
1 Press MENU.  
2 Press  
to select [Setup] >  
[Installation] > [Channel installation] >  
[Analogue: manual install].  
» The [Analogue: manual install] menu  
appears.  
3 Press  
to select [Search], then press  
to enter.  
4 Press  
to manually enter the three-  
digit frequency.  
5 Press OK to begin search.  
» If a channel is unavailable at the  
selected frequency, press OK to search  
for the next available channel.  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rename channels  
Rearrange channels  
You can rename channels.The name appears  
when you select the channel.  
After you install channels, you can rearrange the  
order in which they appear.  
1 When watching TV, press OK to display  
1 When watching TV, press OK to display  
the channel grid.  
the channel grid.  
2 Select the channel to rename.  
2 Press OPTIONS.  
» The channel options menu appears.  
3 Press OPTIONS.  
» The channel options menu appears.  
3 Press  
to select [Reorder], then press  
OK.  
4 Press  
to select [Rename channel],  
then press OK.  
» A text input box appears.  
4 Select the channel to rearrange, then  
press OK.  
» The selected channel is highlighted.  
5 Press  
to select characters.  
6 Press OK to confirm each character.  
5 Press  
to move the highlighted  
channel to the desired location, then  
7 Select [Done], then press OK to finish  
press OK.  
renaming channels.  
6 Press OPTIONS.  
» [Done reordering] appears on the  
screen.  
Tip  
Press [Aa] to change an uppercase letter to a  
lowercase letter and vice versa.  
7 Press OK to confirm.  
8 Press  
BACK to exit the channel grid.  
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Test digital reception  
You can check the quality and signal strength  
of digital channels.This allows you to reposition  
and test your antenna or satellite dish.  
1 Press MENU.  
2 Press  
to select [Setup] >  
[Installation] > [Channel installation] >  
[Manual channel search].  
3 Press to enter the menu.  
4 Press  
to enter the frequency of  
the channel you want to test.  
5 Press OK to confirm the frequency, then  
press OK again to confirm [Search].  
6 When complete, select [Store] to store  
the frequency.  
Note  
If the signal quality and strength is poor,  
reposition the aerial or satellite dish and retest.  
If you still have problems with the reception  
of your digital broadcast, contact a specialised  
installer.  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b EXT 2 (Y Pb Pr and AUDIO L/R)  
Analogue audio and video input from  
analogue or digital devices such as DVD  
players or game consoles.  
7 Connect devices  
This section describes how to connect devices  
with different connectors. Examples are  
provided in the Quick Start.  
Note  
You can use different types of connectors to  
connect a device to your TV.  
Back connector  
c TV ANTENNA  
Signal input from an antenna, cable or  
satellite.  
TV ANTENNA  
a HDMI 1  
Digital audio and video input from high-  
definition digital devices such as Blu-ray  
players.  
Connections via DVI or VGA require an  
additional audio cable (see ‘Connect a  
computer’ on page 34).  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d EXT 1 (CVBS and RGB)  
Side connector  
Analogue audio and video input from  
analogue or digital devices such as DVD  
players or game consoles.  
e SPDIF OUT  
Digital audio output to home theatres  
and other digital audio systems.  
SPDIF OUT  
a COMMON INTERFACE  
Slot for a Conditional Access Module  
(CAM).  
f PC IN (VGA and AUDIO)  
Audio and video input from a computer.  
PC AUDIO IN/ PC IN(AUDIO)  
VGA  
g SERV. U  
For software update.  
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
b AUDIO L/R  
Audio input from analogue devices  
connected to VIDEO.  
f HDMI (Available only in 26 inch TV)  
Digital audio and video input from high-  
definition digital devices such as Blu-ray  
players.  
c VIDEO  
Composite video input from analogue  
devices such as VCRs.  
d USB  
Data input from USB storage devices.  
e
(Headphone)  
Stereo audio output to headphones or  
earphones.  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI cable and HDMI-DVI adaptor  
Connect a computer  
Before you connect a computer to theTV  
PC AUDIO IN/ PC IN(AUDIO)  
Set the screen refresh rate on your  
computer to 60Hz.  
Select a supported screen resolution on  
your computer.  
Connect a computer with one of the  
following connectors:  
DVI  
Note  
Connections via DVI or VGA require an  
additional audio cable.  
HDMI cable  
VGA cable  
PC AUDIO IN/ PC IN(AUDIO)  
DVI-HDMI cable  
VGA  
PC AUDIO IN/ PC IN(AUDIO)  
DVI  
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Access CAM services  
Use a Conditional Access  
Module  
1 After inserting and activating the CAM,  
press MENU.  
A Conditional Access Module (CAM) is  
provided by digitalTV service operators to  
decode digitalTV channels.  
2 Press  
to select [Setup] >  
[Features] > [Common interface].  
» Applications provided by the digitalTV  
service operator appear on the screen.  
Note  
Note  
Refer to the documentation from your service  
operator on how to insert a smart card into  
the Conditional Access Module.  
This menu option is available only if the CAM  
is inserted and activated correctly.  
Insert and activate a CAM  
Caution  
Be sure to follow the instructions described  
below. Wrong insertion of a CAM may  
damage both the CAM and your TV.  
1 Switch off the TV and disconnect it from  
the power outlet.  
2 Following the directions printed on the  
CAM, gently insert the CAM into the  
COMMON INTERFACE at the side of  
the TV.  
3 Push the CAM in as far as it will go.  
4 Reconnect the TV to the power outlet.  
5 Turn on the TV and wait for the CAM  
to be activated. This may take several  
minutes. Do not remove the CAM from  
the slot when in use — removing the  
CAM will deactivate digital services.  
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enable or disable EasyLink  
Use Philips EasyLink  
Your TV supports Philips EasyLink, which  
uses the HDMI CEC (Consumer Electronics  
Control) protocol. EasyLink-compliant devices  
that are connected through HDMI connectors  
can be controlled by a single remote control.  
Note  
Do not enable Philips EasyLink if you do not  
intend to use it.  
1 Press MENU.  
2 Press  
to select [Setup] >  
Note  
[Installation] > [Preferences] >  
The EasyLink-compliant device must be  
switched on and selected as the source.  
Philips does not guarantee 100%  
[EasyLink].  
3 Select [On] or [Off].  
interoperability with all HDMI CEC devices.  
Use one-touch play  
EasyLink features  
One-touch play  
1 After enabling EasyLink, press play on  
your device.  
When you connect your TV to devices that  
support one-touch play, you can control your  
TV and the devices with one remote control.  
One-touch standby  
When you connect your TV to devices that  
support standby, you can use your TV remote  
control to put your TV and all connected  
HDMI devices in standby mode.  
System audio control  
When you connect your TV to HDMI  
CEC compliant devices, your TV can  
switch automatically to play audio from the  
connected device.  
» TheTV automatically switches to the  
correct source.  
Use one-touch standby  
1 Press (Standby-On) on the TV’s or  
device’s remote control.  
» TheTV and all connected HDMI  
devices switch to standby.  
To use one-touch audio, you must map the  
audio input from the connected device to  
your TV.  
You can use the remote control from the  
connected device to adjust the volume.  
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SetTV speakers to EasyLink mode  
When you play content from an EasyLink  
compliant home theater, the TV speakers are  
automatically muted.  
1 Enable one-touch play and one-touch  
standby between your Easylink compliant  
devices by following the instructions  
in the previous section (see ‘Enable or  
disable EasyLink’ on page 36).  
Use a Kensington lock  
There is a Kensington security slot at the back  
of theTV. Prevent theft by looping a Kensington  
lock between the slot and a permanent object,  
such as a heavy table.  
2 Press MENU.  
3 Press  
to select [Setup] > [Sound]  
> [TV speakers] > [Auto EasyLink].  
» TheTV speakers are turned off  
automatically when content from an  
Easylink compliant system is detected.  
4 Press  
to select [Setup] > [Sound]  
> [TV speakers] > [On] to disable  
system audio control and enable the TV  
speakers.  
Note  
To mute the TV speakers, select [TV  
speakers] > [Off].  
EN 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia  
8 Product  
information  
Supported storage device: USB (Only  
FAT or FAT 32 USB storage devices are  
supported)  
Supported multimedia file formats:  
Product information is subject to change  
without notice. For detailed product  
Images: JPEG  
Audio: MP3  
Note  
Multimedia file names must not exceed 128  
characters.  
Supported display resolutions  
Computer formats  
Resolution - refresh rate:  
640 x 480 - 60Hz  
800 x 600 - 60Hz  
1024 x 768 - 60Hz  
1280 x 720 -60Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60Hz  
Tuner / Reception /  
Transmission  
Aerial input: 75ohm coaxial (IEC75)  
DVB: DVB Terrestrial, DVB-T MPEG4  
TV system: DVB COFDM 2K/8K; PAL I,  
B/G, D/K; SECAM B/G, D/K, L/L’  
Video playback: NTSC, SECAM, PAL  
Tuner Bands: Hyperband, S-channel, UHF,  
VHF  
Video formats  
Resolution - refresh rate:  
480i - 60Hz  
480p - 60Hz  
576i - 50Hz  
576p - 50Hz  
720p - 50Hz, 60Hz  
1080i - 50Hz, 60Hz  
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  
60Hz.  
Remote control  
Type: PF01E09B  
Batteries: 2 x AAA (LR03 type)  
Power  
Mains power: 220-240V, 50Hz  
Standby power: < 0.3 W  
Ambient temperature: 5 to 40 degrees  
Celsius  
38 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SupportedTV mounts  
Product specification  
To mount theTV, purchase a PhilipsTV mount.  
To prevent damage to cables and connectors,  
be sure to leave a clearance of at least 2.2  
inches or 5.5cm from the back of theTV.  
Design and specifications are subject to change  
without notice.  
19PFL3405H  
Without TV stand  
Warning  
Dimension (WxHxD): 455 x 303.7 x  
Follow all instructions provided with the TV  
mount. Koninklijke Philips Electronics N.V.  
bears no responsibility for improper TV  
mounting that results in accident, injury or  
damage.  
56 (mm)  
Weight: 3.16 kg  
With TV stand  
Dimension (WxHxD): 455 x 328.7 x  
137.9 (mm)  
Weight: 3.32 kg  
TV screen Required  
Required  
22PFL3405H / 22PFL3415H  
size (inches) pitch (mm) mounting bolts  
Without TV stand  
(10mm)  
Dimension (WxHxD): 526.02 x  
19  
22  
26  
75 x 75  
75 x 75  
75 x 75  
4 x M4  
4 x M4  
4 x M4  
343.5 x 55.79 (mm)  
Weight: 4.0 kg  
With TV stand  
Dimension (WxHxD): 526.02 x  
369.5 x 148.96 (mm)  
Weight: 4.2 kg  
26PFL3405H  
Without TV stand  
Dimension (WxHxD): 637.4 x 410.8  
x 63 (mm)  
Weight: 5.21 kg  
With TV stand  
Dimension (WxHxD): 637.41 x  
447.25 x 170 (mm)  
Weight: 5.5 kg  
EN 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV channel issues  
9 Troubleshooting  
Previously installed channels do not appear in  
the channel list:  
This section describes commonly encountered  
issues and accompanying solutions.  
Check that the correct channel list is  
selected.  
No digital channels were found during the  
installation:  
GeneralTV issues  
Check that the TV supports DVB-T,  
DVB-T Lite or DVB-C in your country.  
TheTV does not switch on:  
Some channels are not automatically installed  
on myTV:  
Disconnect the power cable from the  
power outlet. Wait for one minute then  
reconnect it.  
Check that the power cable is securely  
connected.  
During installation, make sure that  
you select the country where you are  
installing the TV (see ‘Step 2 Select your  
country’ on page 27).  
The remote control is not working properly:  
Check that the remote control batteries  
are correctly inserted according to the  
+/- orientation.  
Picture issues  
Replace the remote control batteries if  
they are flat or weak.  
Clean the remote control and TV sensor  
lens.  
TheTV is on, but there is no picture:  
Check that the antenna is properly  
connected to the TV.s  
Check that the correct device is selected  
as the TV source.  
The standby light on theTV blinks red:  
Disconnect the power cable from the  
power outlet. Wait until the TV cools  
down before reconnecting the power  
cable. If the blinking reoccurs, contact  
Philips Consumer Care.  
There is sound but no picture:  
Check that the picture settings are  
correctly set.  
There is poorTV reception from an antenna  
connection:  
You forgot the code to unlock theTV lock  
feature  
Check that the antenna is properly  
connected to the TV.  
Enter ‘8888’.  
Loudspeakers, unearthed audio devices,  
neon lights, high buildings and other large  
objects can influence reception quality.  
If possible, try to improve the reception  
quality by changing the antenna direction  
or moving devices away from the TV.  
If reception on only one channel is poor,  
fine tune this channel.  
TheTV menu is in the wrong language.  
Change the TV menu to your preferred  
language.  
When turning theTV on / off / to standby, you  
hear a creaking sound from theTV chassis:  
No action is required. The creaking sound  
is normal expansion and contraction of  
the TV as it cools down and warms up.  
This does not impact performance.  
There is poor picture quality from connected  
devices:  
Check that the devices are connected  
properly.  
Check that the picture settings are  
correctly set.  
40 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TheTV did not save your picture settings:  
HDMI connection issues  
Check that the TV location is set to the  
home setting. This mode offers you the  
flexibility to change and save settings.  
There are problems with HDMI devices:  
Note that HDCP (High-bandwidth Digital  
Content Protection) support can delay  
the time taken for a TV to display content  
from a HDMI device.  
The picture does not fit the screen; it is too  
big or too small:  
Try using a different picture format.  
The picture position is incorrect:  
If the TV does not recognise the HDMI  
device and no picture is displayed, try  
switching the source from one device to  
another and back again.  
Picture signals from some devices may  
not fit the screen correctly. Check the  
signal output of the device.  
Cannot remove ‘e-sticker’ banner displayed on  
theTV.  
If there are intermittent sound  
disruptions, check that output settings  
from the HDMI device are correct.  
If you use an HDMI-to-DVI adapter  
or HDMI-to-DVI cable, check that an  
additional audio cable is connected to  
AUDIO (mini-jack only).  
To remove the logos and images, set the  
location of your TV to home.  
1. Press MENU.  
2. Select [Setup] > [Installation] >  
[Preferences] > [Location].  
3. Select [Home] and press OK.  
Computer connection issues  
Sound issues  
The computer display on theTV is not stable:  
Check that your PC uses the supported  
resolution and refresh rate.  
Set the TV picture format to unscaled.  
There is a picture but sound quality is poor:  
Note  
If no audio signal is detected, the TV  
automatically switches the audio output off  
— this does not indicate malfunction.  
Contact us  
If you cannot resolve your problem, refer to the  
If the problem remains unresolved, contact Philips  
Consumer Care in your country as listed in the  
Addendum.  
Check that all cables are properly  
connected.  
Check that the volume is not set to 0.  
Check that the sound is not muted.  
There is a picture but the sound quality is  
poor:  
Warning  
Check that the sound settings are  
correctly set.  
Do not attempt to repair the product yourself.  
This may cause severe injury, irreparable  
damage to your product or void your  
warranty.  
There is a picture but sound comes from one  
speaker only:  
Verify that sound balance is set to the  
centre.  
Note  
Make a note of your TV model and serial  
number before you contact Philips. These  
numbers are printed on the back of the TV  
and on the packaging.  
EN 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conditional Access Module  
35  
10 Index  
connect  
antenna  
PC  
31  
41, 34  
connectors  
HDMI  
overview  
USB  
content ratings  
country  
A
41, 31  
31  
analogue  
fine-tune  
antenna  
28  
31  
22  
20  
27  
B
batteries  
38, 5  
39  
D
bracket for wall mount  
decoder  
25  
26  
26  
10  
default settings  
demo  
C
CAM  
35  
5
25  
9
devices  
devices  
care  
channel decoder  
channel grid  
channels  
add to home menu  
connect  
11  
31  
11  
11  
10  
remove  
favourites list  
fine-tune  
grid  
install  
16  
28  
9
rename  
watch  
digital channel  
subtitles  
21  
30  
23, 27  
automatic  
manual  
27  
28  
16  
20  
29  
29  
9
30  
40  
28  
16  
test reception  
digital radio  
digital services  
CAM  
list  
lock  
35  
10, 15  
23  
rename  
reorder / rearrange  
switch  
teletext  
disconnect USB  
display  
test reception (digital channels)  
troubleshooting  
tune  
resolution  
dispose  
38  
5
update  
E
child lock  
lock channels  
lock connected devices  
PIN code  
ratings lock  
clock  
EasyLink  
20  
20  
20  
20  
disable  
36  
36  
36  
36  
37  
5
enable  
one-touch play  
one-touch standby  
system audio control  
end of life  
display  
set  
18  
18  
35  
environmental care  
e-sticker  
5
25  
common interface  
computer  
connect  
41, 34  
38  
display resolution  
42 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F
M
factory settings  
favourites list  
add to list  
26  
menu  
language  
main menu  
teletext  
27  
11  
15  
15  
10  
12  
38  
16  
16  
16  
28  
create list  
view list  
universal access  
MHEG teletext  
MPEG artifact reduction  
multimedia  
fine-tune channels  
H
music  
HDMI  
41, 31, 32  
digital radio  
23  
23  
23  
37  
hearing impaired  
home mode  
15  
25  
USB  
with slideshow  
mute TV speakers  
I
install channels  
automatic  
manual  
O
27  
28  
OAD  
24  
19, 19  
36  
on timer  
one-touch play  
one-touch standby  
36  
K
Kensington lock  
37  
P
parental rating  
PC  
20  
L
language  
connect  
34, 41  
38  
menu  
27  
21  
40  
resolution  
subtitle  
picture format  
change  
troubleshooting  
picture settings  
PIN code  
pixel plus link  
power  
power consumption  
preferences  
product specifications  
troubleshoot  
list  
favourites list  
location  
13  
40  
12  
20  
25  
38  
38  
25  
38  
16  
country  
27  
25  
home or shop  
lock  
Kensington lock  
lock channels  
lock connected devices  
PIN code  
ratings lock  
37  
20  
20  
20  
20  
EN 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R
T
radio  
23  
Table of Pages  
technical specifications  
teletext  
16  
38  
rearrange channels  
reception  
recycle  
register product  
remote control  
batteries  
29  
30, 40  
5
7
features  
15  
15  
15  
16  
10  
menu  
subpages  
Table of Pages  
use  
38, 5  
7
overview  
technical specifications  
rename channels  
reorder channels  
resolution  
38  
29  
29  
38  
26  
timer  
on timer  
sleep timer  
standby  
19  
19  
19  
restore default  
transmission  
transporting  
troubleshooting  
TV lock  
38, 40  
4
40  
S
safety  
4
5
lock channels  
lock connected devices  
PIN code  
20  
20  
20  
20  
7
screen care  
settings  
picture  
sound  
12  
14, 12  
12  
ratings lock  
TV overview  
settings assistant  
shop mode  
slideshow  
view  
with music  
smart card  
smart picture  
smart settings  
smart sound  
software  
25  
U
22  
23  
35  
12  
universal access menu  
USB  
15  
disconnect USB  
listen to music  
update software  
view photos  
23  
23  
24  
22  
12, 14  
14  
over the air download  
update  
version  
24  
24  
24  
14  
38  
9
V
video format  
technical specifications  
volume  
38  
sound settings  
specifications  
standby  
adjust  
10  
14  
14  
automatic levelling  
delta  
subpages in teletext  
subtitles  
15  
mute  
10, 37  
language  
21  
21  
21  
on analogue channel  
on digital channel  
switch  
W
wall mount  
4
channels  
on and off  
source  
9
9
10  
44 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Switch c1515m a User Manual
Philips Blender HR2061 User Manual
Philips Iron GC6310 User Manual
Philips Portable Radio 180B2S User Manual
Philips Stereo System FW D1 User Manual
Pioneer MP3 Docking Station XW NAC1 K User Manual
Planet Technology Network Router WAP 4035 User Manual
Polycom Server DOC2566A User Manual
PS Audio Stereo System C 100 User Manual
PYLE Audio GPS Receiver PLNVB26 User Manual