Philips Stereo System FW D1 User Manual

^FW-D1

Mini Hi-Fi System

with DVD and 3 CD changer

3139 115 20051

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

NEVER MAKE OR CHANGE CONNECTIONS WITH THE

POWER SWITCHED ON.

LASER SAFETY

This unit employs a laser. Only a qualified service person

should remove the cover or attempt to service this device,

due to possible eye injury.

Manufactured under license from Dolby Laboratories.

“Dolby”, “AC-3” and the double-D symbol are

trademarks of Dolby Laboratories. Confidential

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN

AVOID EXPOSURE TO BEAM (WARNING LOCATION:

INSIDE ON LASER COVERSHIELD)

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

TruSurround and the SRS symbol are trademarks of SRS

Labs., Inc. TruSurround technology is manufactured

under license from SRS Labs., Inc.

The region code for FW-D5/21M and

FW-D1/21M is 3.

LASER

Type

Wave length

Semiconductor laser GaAlAs

650 nm (DVD)

The region code for FW-D5/21, /30

785 nm (VCD/CD)

7 mW (DVD)

and FW-D1/21, /30 is 4.

Output Power

10 mW (VCD/CD)

60 degree.

Since it is usual for DVD movies to be released at

different times in different regions of the world, all

players have region codes and discs can have an

optional region code. If you load a disc of a different

region code to your player, you will see the region code

notice on the screen. The disc will not play, and should

be unloaded.

Beam divergence

Dolby Surround and the double-D symbol d are

trademarks of Dolby Laboratories Licensing Corporation.

Manufactured under license from Dolby Laboratories

Licensing Corporation.

This product incorporates copyright protection

technology that is protected by method claims of

certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other

rights owners. Use of this copyright protection

technology must be authorised by Macrovision

Corporation, and is intented for home and other limited

viewing uses only unless otherwise authorised by

Macrovision Corporation. Reverse engineering or

disassembly is prohibited.

For Customer Use:

Read carefully the information located at the bottom of

your DVD-VIDEO player and enter below the Serial No.

Retain this information for future reference.

Model No. __________________________

Serial No. __________________________

3139 115 20053

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

FW-D5

FW-D1

3139 115 20053

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

English .....................................6

Français .................................42

Español ..................................80

...............................................118

Português ............................154

Warranty ..............................192

Australia/New Zealand/Brasil/Mexico

CLASS 1

LASER PRODUCT

3139 115 20053

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

General Information......................................................................... 7

Safety Information............................................................................ 7

Preparation................................................................................ 8 - 10

Controls .....................................................................................11 - 13

Operating The System ........................................................... 14 - 16

DVD-VIDEO ...............................................................................17 - 31

CD ...............................................................................................32 - 34

Tuner ..........................................................................................35 - 36

AUX/CDR .......................................................................................... 37

Clock................................................................................................. 37

Timer ................................................................................................. 38

Specifications................................................................................. 39

Maintenance ................................................................................... 40

Troubleshooting .......................................................................40 - 41

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL INFORMATION

SAFETY INFORMATION

• If the system is brought directly from a

cold to a warm location, or is placed in a

very damp room, moisture may

condense on the lens of the CD/DVD

unit inside the system. Should this

occur, the player will not operate

normally. Leave the power on for about

one hour with no disc in the system until

normal playback is possible.

• Electrostatic discharge may cause

unexpected problems. See whether

these problems disappear if you unplug

the AC power cord and plug it in again

after a few seconds.

IMPORTANT:

PLEASE NOTE THAT THE

VOLTAGE SELECTOR

Accessories (Supplied)

Safety Information

– Remote control

• Before operating the system, check that

the operating voltage indicated on the

typeplate (or the voltage indication

beside the voltage selector) of your

system is identical with the voltage of

your local power supply. If not, please

consult your dealer. The typeplate is

located at the rear of your system.

• When the system is switched on, do not

move it around.

– Batteries (two AA size) for remote

control

– AM loop antenna

– FM wire antenna

– AC power cord

– For model FW-D5 only

CS-05 speaker package (includes one

pair of surround speakers and one

centre speaker)

LOCATED AT THE REAR OF

THIS SYSTEM IS PRESET AT

220V FROM THE FACTORY.

FOR COUNTRIES THAT

OPERATE AT 110V, PLEASE

ADJUST TO 110V BEFORE YOU

SWITCH ON THE SYSTEM.

– CVBS cable cinch

• Place the system on a solid base (e.g. a

cabinet).

General Information

The typeplate (which contains the

serial number) is located at the rear

of the system.

Recording is permissible if

parties are not infringed.

•

• Place the system in a location with

adequate ventilation to prevent internal

heat build-up in your system. Allow at

least 10 cm (4 inches) clearance from

the rear and the top of the unit and 5 cm

(2 inches) from each side.

•

To disconnect the system from the

power supply completely, remove

the AC power plug from the wall

socket.

•

• Do not place the system on soft carpet

that will cover the ventilation hole at

the bottom.

• Do not expose the system to excessive

moisture, rain, sand or heat sources.

• Under no circumstances should you

repair the system yourself, as this will

invalidate the warranty!

Environmental Information

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buffer) and polyethylene (bags,

protective foam sheet).

Your system consists of materials which

can be recycled and reused if disassembled

by a specialized company. Please observe

the local regulations regarding the disposal

of packaging materials, exhausted

batteries and old equipment.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

Rear Connections

AUDIO IN

surr. surr.

AUDIO OUT

STANDBY

MIN

MAX

60Hz

150Hz

LINE-OUT

AUX/CDR-IN

SURROUND OUT

SUB-

WOOFER

OUT

AUDIO

DIGITAL

OUT

S-VIDEO

OUT

(Y/C)

VIDEO OUT

(CVBS)

FM ANTENNA 75Ω

AM ANTENNA

CENTER

–

VOLTAGE

SELECTOR

110V-

REAR

FRONT

SURROUND

127V

220V-

240V

–

MAINS

surr.

CENTER

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

CAUTION:

A AM Loop Antenna

F Subwoofer Out Connection H Line Out Connection (wireless

– For optimal sound performance, it is

recommended to use the supplied

speakers.

– Do not connect more than one speaker

to any one pair of +/- speaker

terminals.

– Do not connect speakers with

impedance lower than the speakers

supplied. Please refer to the

SPECIFICATIONS section of this manual.

Connect the optional active subwoofer to

ready)

Connection

the SUBWOOFER OUT terminal. The

Connect the supplied loop antenna to the

AM ANTENNA terminal. Place the AM loop

antenna far away from the system and

adjust its position for the best reception.

You can connect the audio left and right

LINE OUT terminals to a optional CD

Recorder's ANALOGUE IN terminals. This

allows you to record in an analogue format.

subwoofer reproduces just the low bass

sound effect (e.g. explosions, the rumble of

spaceships, etc.). Be sure to follow the

instructions supplied with the subwoofer.

You can also install additional optional

front active speakers away from the system

(e.g. in another room) to reduce the

B FM Wire Antenna

G Wireless Surround Out

Connection (for model FW-D5

only)

You may connect the transmitter of the

wireless rear speakers (not supplied) to the

SURROUND OUT terminal.

Connection

inconvenience of running long speaker

wires across rooms. You can place as many

remote speakers as you like provided they

operate at the same radio frequency.

Connect the wireless radio frequency

transmitter to the LINE OUT terminals.

Place the active speakers at your preferred

location. Be sure to follow the instructions

supplied with the active speakers.

Connect the supplied FM wire antenna to

the FM ANTENNA 75 Ω terminal. Adjust

the position of the FM antenna for the best

reception.

D Centre Speaker Connection

(for model FW-D5 only)

Connect the black (non-marked) wires to

the black CENTER terminal and the blue

(marked wires) to the blue CENTER

terminal.

Outdoor Antenna

Note:

For better FM stereo reception connect an

outdoor FM antenna to the FM ANTENNA

75 Ω terminal using a 75 Ω coaxial wire.

– Availability of a wireless transmitter and

its peripherals are subjected to the

approval of local authorities. Please

check with the respective local safety or

approving authority.

E Rear Surround Speakers’

Connection (for model FW-D5

only)

Connect the black (non-marked) wires to

the black REAR SURROUND terminals and

the coloured (marked) wires to the grey

REAR SURROUND terminals.

C Speakers Connection

• Connect the right speaker to Front

terminal R, with the coloured wire to +

and the black wire to -.

• Connect the left speaker to Front

terminal L, with the coloured wire to +

and the black wire to -.

• Clip the stripped portion of the speaker

wire as shown.

I Connecting other

equipment to your system

You can connect the audio left and right

OUT terminals of a TV, VCR, Laser Disc

player, DVD player or CD Recorder to the

AUX/CDR IN terminals at the rear of the

system.

12 mm

unlock

lock

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

J Video Out Connection

Connect the VIDEO OUT (CVBS) terminal at

the rear of the system to the TV or VCR

VIDEO IN terminal for viewing or recording.

L Adjusting the Operating

Voltage (not available for all

versions)

Before connecting the AC power cord to a

wall outlet, make sure that the voltage

selector at the rear of the system is set to

the local power line voltage. If not, reset

the selector before connecting to the wall

outlet.

Inserting batteries into the

Remote Control

• Insert the batteries (Type R06 or AA)

into the remote control as shown in the

battery compartment.

Note:

– You can also choose to connect the

S-VIDEO OUT (Y/C) terminal at the rear

of the system to the S-VIDEO IN of the

TV using an optional S-VIDEO cable.

M AC Power Supply

After all other connections have been

made, connect the AC power cord to the

system and to the wall outlet.

K Audio Digital Out

Connection

You can record the digital sound from the

CD/DVD, through this output, on any audio

equipment with digital input (e.g. CD

Recorder, Digital Audio Tape (DAT) deck,

Digital to Analogue Converter and Digital

Signal Processor).

• To avoid damage from possible battery

leakage, remove dead batteries or

batteries that will not be used for a long

time. For replacement, use type R06 or

AA batteries.

Connect one end of the cinch cable (not

supplied) to the DIGITAL OUT socket and

the other end to the audio equipment's

digital input. When connecting the cinch

cable, make sure it is fully inserted.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS

DISC CHANGE

OPEN•CLOSE

CD 1

CD 2

CD 3

TV/AV

DVD

TUNER AUX/CDR

C H A N G E R

DVD MINI HIFI SYSTEM

STANDBY

NEWS / T.A.

‚

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

RDS/CD TEXT

REPEAT

SHUFFLE

SURROUND CONTROL

5.1CH

STEREO

SURR

VOLUME

VCD • CD

DVD

CD 1 • 2 • 3

BAND

TUNER

CDR

AUX

⁄

•

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

∞

≤

‹

VOLUME

CLOCK/

TIMER

PROG

DIM

DVD

≥

DVD

OSD

SURR.

DVD

AXIS

STOP

PLAY

›

DVD JOG

SOUND JOG

ECHO

KEY CONTROL

∞

≤

(

ﬁ

PROG. AUDIO

FTS

A-B KARAOKE

‡

ﬂ

DSC

VEC

DBB

TIMER

PLAYBACK

MODE

DVD / VCD / CD PLAYBACK

DVD

VCD

OPEN/CLOSE

)

MIC LEVEL

MIC

™

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS

–

OPEN•CLOSE

for TUNER

–

SOUND JOG

Controls on the system and

remote control

to open or close the CD carousel tray.

CD 1 / CD 2 / CD 3 (CD DIRECT

PLAY)

to select a CD tray for playback.

SURROUND SOUND DISPLAY

PANEL (for model FW-D5 only)

to view the selected Surround setting.

SURROUND CONTROL (SURR) (for

model FW-D5 only)

to select Multichannel Sound, Stereo,

Surround or 3D Sound mode for DVD

operation only.

MODE SELECTION

SEARCH•TUNING à á

( 1 2 )

– to stop programming.

for DEMO (on the system only)

– to start or stop demonstration

mode.

PLAY PAUSE ÉÅ

for DVD/VCD/CD

– to start or interrupt playback.

for DVD/VCD

– to watch a still picture.

í PREV / NEXT ë

(PRESET)

to select the desired sound effect of

VEC/PERSONAL/DSC/DBB setting.

You must select the respective sound

feature first.

–

STANDBY ON

to switch the system on or to standby

mode.

–

VEC

–

to select the desired Virtual

Environment Control effect : HALL,

CLUB, DISCO, CINEMA, CONCERT or

ARCADE.

–

to use for EASY SET.

IR SENSOR

–

sensor for the infrared remote control.

SOURCE – to select the following:

DVD / (VCD•CD)

–

PERSONAL

–

to select up to 6 personal preferred

Spectrum Analyser settings :

PERSONAL 1-6.

–

to select DVD mode. When in DVD

mode, you can play DVD, VCD or CD.

CD / (CD 1•2•3)

to select CD mode. When CD playback

is stopped, press to select disc tray 1,

2 or 3.

for DVD/VCD/CD

– to skip to the beginning of the

current, previous, or next title or

track.

DSC

to select the desired Digital Sound

Control effect : OPTIMAL, CLASSIC,

TECHNO, VOCAL, ROCK or JAZZ.

DBB

to select a Dynamic Bass Boost level :

BEAT, PUNCH or BLAST.

to connect headphones.

VOLUME

to increase or decrease the volume.

DIM

for DVD/VCD/CD

for VCD only

– to search backward/forward

(except for CD playback in DVD-

VIDEO tray).

for TUNER

– to tune to a lower or higher radio

frequency.

for CLOCK (on the system only)

– to set the hour.

for TV VOL.

– to adjust the TV volume if the

remote operates your TV.

STOP•CLEAR Ç

– to select next or previous MENU

(for VCD with PBC on).

– to select next or previous VCD track

during playback (for VCD with PBC

off).

for TUNER

– to select a preset radio station in

memory.

for CLOCK (on the system only)

– to set the minute .

CLOCK/TIMER

to view the clock, set the clock or set

the timer.

SOUND CONTROL

to select the desired sound feature :

VEC, PERSONAL, DSC or DBB.

TUNER / (BAND)

–

to select Tuner mode. When in tuner

mode, press to select the waveband:

FM or MW.

–

AUX / (CDR)

to select sound from an external

source (e.g. TV, VCR, Laser Disc player,

DVD player or CD Recorder). When in

AUX mode, press to select either AUX

or CDR.

–

to select brightness for the display

screen : DIM 1, DIM 2, DIM 3 or DIM

OFF.

–

TV/AV (only on the remote control)

to select TV or Video mode.

DISPLAY SCREEN

to view the current setting of the

system.

–

for DVD/VCD/CD

– to stop playback (in DVD mode

only).

–

for CD

–

CD CAROUSEL TRAY

DISC CHANGE

to change CD(s).

– to stop playback or to clear a

programme (in CD mode only).

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS

PROGram (FTS- Favourite track

selection)

for DVD/VCD/CD

– to programme disc tracks.

for TUNER

– to programme preset radio

stations.

for CLOCK (on the system only)

– to select 12 or 24 hour in clock

setting mode.

DVD-VIDEO DISC TRAY

OPEN/CLOSE 0

to open or close the DVD-VIDEO tray.

MIC LEVEL (not available for all

versions)

to adjust the mixing level for karaoke

in DVD mode only.

MIC (not available for all versions)

to connect microphone jack.

PLAYBACK MODE

to view the selected playback mode :

DVD, VCD or CD.

DVD MENU

to access the DVD disc menu.

to confirm the selection.

AXIS ( 1 2 3 4 )

≥

–

DVD JOG

ﬂ

–

‡

–

TIMER

to switch on or off the timer.

KARAOKE

versions)

to switch the Karaoke features ON/

OFF mode.

KEY CONTROL -/+ (not

available for all versions)

to adjust the key to suit your vocal

range.

Notes for remote control:

to move the cursor up/down or left/

right. You must select the AXIS

movement direction first.

SCAN

– First select the source you wish to

control by pressing one of the

source select keys on the remote

control (e.g. DVD, TUNER, etc.).

– Then select the desired function

(É, í, ë, etc.).

(not available for all

•

for DVD

– to playback the first 10 seconds of

each chapter within a title.

for VCD/CD

– to playback the first 10 seconds of

each track.

A - B (in DVD mode only)

to playback a certain scene or passage

of a disc repeatedly.

PBC (PLAYBACK CONTROL)

to switch on or off PBC mode (for VCD

version 2.0 only).

–

(

)

–

SHUFFLE

–

to play all the available discs and their

tracks in random order.

DIGIT 0 – 9

(numbers consisting more than two

figures must be keyed in within 2

seconds.)

‚

–

⁄

–

RETURN

to return to the previous MENU level

during playback.

™

–

for DVD/VCD/CD

– to key in a disc title or track for

playback or programming.

for VCD with PBC on only

– to select a track.

for TUNER

– to key in a preset radio station.

–

REPEAT

–

to repeat a disc track, a disc, or all

available discs (in CD mode only).

to repeat playback a Chapter/Index,

Title/Track or Disc (in DVD mode only).

OSD MENU (ON SCREEN

DISPLAY)

to switch on or off the on screen

display on the TV screen.

ECHO -/+ (not available for all

≤

–

∞

‹

–

to switch the system to standby mode.

to select the direction of cursor

movement : up/down or left/right.

(on the remote control only)

to select movement of cursor: left,

right, up or down.

›

–

versions)

–

ﬁ

to adjust the echo level for karaoke.

AUDIO

–

to select different audio languages

available in the DVD disc.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING THE SYSTEM

To start the demonstration mode

• Press and hold Ç(on the system only)

for 5 seconds when the system is in

standby mode.

Switching the system ON

DVD MINI HIFI SYSTEM

STANDBY

NEWS / T.A.

• Press DVD, CD, TUNER or AUX.

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

You can also switch on the system by

pressing any one of the CD DIRECT PLAY

buttons.

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

RDS/CD TEXT

™ The demonstration will begin.

SURROUND CONTROL

5.1CH

STEREO

SURR

VCD • CD

CD 1 • 2 • 3

BAND

TUNER

CDR

DVD

AUX

Easy Set

EASY SET allows you to store all available

radio stations automatically.

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

Switching the system to

standby mode

VOLUME

CLOCK/

TIMER

PROG

DIM

• Press STANDBY ON or B on the

remote control.

™ The system will switch to standby

mode.

• Press and hold STANDBY ON (on the

system only) for 5 seconds; when the

system is in standby or demonstration

mode.

DVD

AXIS

DVD JOG

SOUND JOG

™ "EASY SET" will be displayed, and

followed by "TUNER" and then

"AUTO".

™ EASY SET will start searching for all

radio on FM band and then followed

by radio stations on MW band.

™ All available radio stations with

sufficient signal strength will be

stored. Up to 40 presets may be

stored.

Selecting the Source

Important:

Before you operate the system,

complete the preparation procedures.

To stop the demonstration mode

• Press and hold Ç(on the system only)

for 5 seconds when the system is in

demonstration mode.

™ The demonstration will stop.

™ "DEMO OFF" will be displayed.

™ The system will switch to standby

mode.

• Press the desired source selection

button: DVD, CD, TUNER or AUX.

™ The display indicates the selected

source.

Demonstration mode

Note:

The system has a demonstration mode that

shows the various features offered by the

system. When the system is switched

on for the first time, the demonstration

mode will start automatically.

– For an external source, make sure you

have connected the audio left and right

OUT terminals of the external

equipment (TV, VCR, Laser Disc player,

DVD player or CD Recorder) to the AUX/

CDR IN terminals.

Notes:

– When the system is switched on from

the main power outlet, the CD carousel

tray may open and close again to

initialize the set.

– Even though the AC power cord is

removed from and reconnected to the

wall socket, the demonstration will

remain off until it is switched on again.

– EASY SET will start with the FM band, if

there are still presets available, the

system will continue to store the MW

band.

– When EASY SET is used, all previously

stored radio stations will be replaced.

– The last preset radio station will appear

on the display when EASY SET is

completed.

Notes:

– During the demonstration, if you press

any source (or standby-on) button, the

system will switch to the respective

mode (or standby).

– When the system is switched to standby

mode, the demonstration will resume 5

seconds later.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING THE SYSTEM

DIM 3 - half brightness with Spectrum

Analyser Off and all LEDs on the

system will be switched off.

PERSONAL SOUND

You can store up to 6 personal settings.

Dim mode

Volume Control

You can select the desired brightness for

the display.

Adjust VOLUME to increase or decrease

1 Press to select the PERSONAL feature.

2 Adjust the JOG to select the desired

Personal setting.

™ The selected personal setting number

will appear on the display.

™ If no name has been stored

previously, "PERSONAL X" will be

displayed. "X" is the setting number.

the sound level.

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

• Press DIM to select DIM 1, DIM 2,

DIM 3 or DIM OFF display mode.

™ The DIM appears on the display.

™ "DIM 1", "DIM 2", "DIM 3" or

"DIM OFF" will be displayed

For Personal Listening

Connect the headphones plug to the n

socket at the front of the system. The

speakers will be muted.

depending on the mode selected.

Sound Control

For Optimal sound listening, you can

only select one of the following sound

controls at a time : VEC, PERSONAL or

DSC .

DIM OFF - normal brightness with

Spectrum Analyser On

Personal Setting

You can adjust the personal setting to your

desired level with the JOG control.

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

1 Press and hold PERSONAL for about 5

seconds to switch on the personal

setting mode.

™ "SELECT PRESET NUMBER" will

be displayed.

VIRTUAL ENVIRONMENT CONTROL

(VEC)

The VEC feature enables you to adjust the

system to select a type of environment.

DIM 1 - normal brightness with

Spectrum Analyser Off

2 Adjust the JOG to select the desired

preset number for personal setting and

press á to confirm the selection.

™ "ADAPT LOW FREQ LEVEL" will

be displayed.

3 Adjust the JOG to select the desired

Spectrum Analyser band level for low

frequency.

1 Press to select the VEC feature.

2 Adjust the JOG to select the desired

VEC setting : HALL, CLUB, DISCO,

CINEMA, CONCERT or ARCADE.

™ The selected environment is

encircled.

™ "HALL, CLUB, DISCO,

CINEMA, CONCERT or

ARCADE" will be displayed.

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

DIM 2 - half brightness with Spectrum

Analyser On

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

™ The level will increase or decrease

between+3 and -3.

4 Press á to confirm the selection.

™ "ADAPT MID FREQ LEVEL" will

be displayed, followed by "ADAPT

HIGH FREQ LEVEL".

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING THE SYSTEM

•

Repeat step 3 - 4 to select the desired

middle and high frequencies of the

Spectrum Analyser band levels.

5 You can edit the name for the personal

setting.

™ The first character of the setting

name will be flashing.

DIGITAL SOUND CONTROL (DSC)

The DSC feature enables you to adjust the

system to suit your type of music.

Note:

– Some CDs might be recorded in high

modulation, which causes a distortion

at high volume. If this occurs, switch off

DBB or reduce the volume.

1 Press to select the DSC feature.

2 Adjust the JOG to select the desired

DSC setting : OPTIMAL, CLASSIC,

TECHNO, VOCAL, ROCK or JAZZ.

™ The selected digital sound is

encircled.

™ "OPTIMAL, CLASSIC, TECHNO,

VOCAL, ROCK or JAZZ" will be

displayed.

Automatic DSC-DBB / VEC-DBB

selection

The best DBB setting is generated

automatically for each DSC or VEC

selection. You can manually select the DBB

setting that best suits your listening

environment.

6 Adjust the JOG to select the desired

letter, number or symbol.

™ "Ato Z", "0to 9" or "*, -, +, \, /, _".

7 Press á to confirm the selection.

™ The next character for editing will be

flashing.

Note:

• Repeat steps 6 - 7 to store up to 10

– For a neutral setting, select CLASSIC.

characters.

8 To store the setting, press PERSONAL

again.

DYNAMIC BASS BOOST (DBB)

There are three DBB settings to enhance

the bass response.

•

Before storing the setting, you can

press à to retrace the steps.

To exit without storing the setting,

press Ç.

1 Press to select the DBB feature.

2 Adjust the JOG to select the desired

DBB level : BEAT, PUNCH or BLAST.

™ The DBB LED will be lit.

™ "BEAT", "PUNCH" or "BLAST" will

be displayed.

•

Notes:

– During personal setting, if no button is

pressed within 90 seconds, the system

will exit personal setting mode

automatically.

– It is not possible to adjust the DBB level

during personal setting, "USE JOG"

will be displayed.

To switch off DBB

1 Press DBB briefly.

2 Adjust the JOG until "DBB OFF" is

displayed.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

General Information

DVD-Video

Video CD

Audio CD

• Digital video discs provide perfect

digital, studio-quality pictures; three

dimensional digital; multi-channel

audio; story sequences screened from

your choice of camera angle; sound

tracks in as many as eight languages;

and up to 32 subtitles if available on

disc.

You will recognise

You will recognise Video

Audio CDs contain music

DVD-Video discs by

the logo shown at

right. Depending on

the material on the disc (a movie, video

clips, a drama series, etc.) the disc may

have one or more Titles. Each Title may

have one or more Chapters. To make

playback easy and convenient, your player

lets you select Titles and Chapters.

CDs by the logo shown at

right. Depending on the

material on the disc (a

movie, video clips, a

drama series, etc.) the disc may have one

or more tracks. Tracks may have one or

more indexes, as indicated on the disc

case. To make playback easy and

convenient, your player lets you select

tracks and indexes.

tracks only.

You will recognise CDs by

their logo which is shown

at right. You can play them in conventional

style through a stereo system, using the

keys on the remote control and/or front

panel, or via the TV using the On-Screen

Display (OSD).

• DVD-Video uses state-of-the-art MPEG2

data compression technology to register

an entire movie on the single 5-inch

disc. DVD's variable bitrate

AUDIO CD

DVD-VIDEO DISC

TRACKS

TITLE 1

TITLE 2

VIDEO CD

TRACK 1

INDEX 1 INDEX 2

TRACK 2

INDEX 2

compression, running up to 9.8 Mbits/

second, captures even the most complex

pictures in their original quality.

• The crystal-clear digital pictures have a

horizontal resolution of over 500 lines,

with 720 pixels (picture elements) to

each line. This resolution is more than

double that of VHS, superior to Laser

Disc, and entirely comparable with

digital masters made in recording

studios.

CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2

CHAPTER 3

10 11 12 ...

INDEX 1

INDEX 3

• In addition to the DVD-Video discs, you

will be able to play all Video CDs and

Audio CDs (including finalised CD

Recordable and CD Rewritable).

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Setting up the Multichannel

system

You must set up the system properly in

order to enjoy the MULTICHANNEL to the

fullest. First, connect the speakers.

DVD MINI HIFI SYSTEM

Surround Setup (for FW-D5

DVD operation only)

STANDBY

NEWS / T.A.

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

RDS/CD TEXT

SURROUND CONTROL

Multichannel sound

5.1CH

STEREO

SURR

VCD • CD

CD 1 • 2 • 3

BAND

TUNER

CDR

MULTICHANNEL SOUND gives you a

completely new listening sensation. You

will have the feeling of being in the middle

of the action, because sound is coming

from everywhere around you. Look for

DVD

AUX

5-Speaker Connection

• Front speakers: Connect the front

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

speakers to the FRONT terminals.

VOLUME

CLOCK/

TIMER

PROG

DIM

•

Centre speaker: Connect the centre

speaker to the CENTER terminals.

Rear (surround) speakers: Connect

either the wired rear surround speakers

or a pair of wireless rear speakers (not

supplied) to the SURROUND OUT

terminals.

DVD

discs with the

mark

DVD

AXIS

which indicates the material is encoded for

multichannel surround sound.

DVD JOG

SOUND JOG

Notice that DVDs do not always carry full

multichannel surround. To be sure that a

disc is multichannel encoded, consult your

dealer.

PLAYBACK

MODE

DVD / VCD / CD PLAYBACK

DVD

VCD

OPEN/CLOSE

MIC LEVEL

CENTER

Most ordinary stereo tapes and discs can

be replayed using surround sound settings

with good results. If the reproduction is

distorted in surround mode, switch to

normal stereo mode.

MIC

REAR

SURROUND

FRONT

REAR

LEFT

FRONT

LEFT

REAR

RIGHT

FRONT

RIGHT

The availability of the various surround

sound modes described depends on the

number of speakers used and the incoming

sound information.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Surround

Positioning the Speakers

To get the best surround sound effect,

place the speakers as follows.

Switching Surround Control

Sound

You can switch through the different

surround modes. Note that the

possibilities are related to speaker setup as

defined.

LEFT

CENTER

RIGHT

SURR

This surround mode enables

normal surround sound

reproduction with two

speakers. Depending on the source

material, Dolby Pro Logic or MPEG is

reproduced (for connection to another

Dolby Pro Logic decoder).

CHANNEL

SURR

CENTER

SPEAKER

SUB-

WOOFER

MINI HIFI

SYSTEM

FRONT

LEFT

FRONT

RIGHT

• Press SURROUND CONTROL (or

SURR on the remote control) to select :

MULTICHANNEL, STEREO, SURROUND

or 3D SURROUND mode.

™ The message "DOLBY DIGITAL

AC3 5.1 CHANNEL, STEREO,

SURROUNDor 3D SURROUND"

will be displayed.

SURROUND

LEFT

SURROUND

RIGHT

3D Surround

The sound of the rear

channel is simulated by the

front left and right

speakers.

LEFT

CENTER

RIGHT

SURR

CHANNEL

SURR

Front Left and Right Speakers

For the best sound, place the Left and Right

speakers at an angle of approximately 45

degrees to the listener. If the speakers'

magnetic field affects the television

picture, increase the distance between the

TV and the speakers.

Note:

– Always refer to OSD when selecting

Multichannel (5.1)

surround control sound. When in stop

mode, the player will not display the

correct surround selection.

In addition to SURROUND,

LEFT

CENTER

RIGHT

the surround mode used

will be displayed. AC3

must be available on the

source material.

SURR CHANNEL SURR

Centre Speaker

For the best sound, place the centre

speaker at the same height as the left and

right speakers. Place the centre speaker

directly above or beneath the television.

Stereo

All sound is reproduced and

played through the front left

and right speakers. This

enables standard stereo

reproduction.

LEFT

CENTER

RIGHT

SURR

Rear (surround) Speakers

CHANNEL

SURR

The surround speakers should be placed at

normal listening ear level or mounted on

the wall at the back of the room. Most

important, experiment when placing the

surround speakers in order to obtain the

best sound.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Menu bar/Status window

The status window displays the current

status of the player and appears with the

first part of the menu bar. (You must

activate this in the Features Menu, see

Personal Preferences for details).

Angle

Child Lock On

Child Safe

Resume

FTS TITLE

CHAP.

FM LW A M W SLEEP DIM TIMER

General

Action prohibited

Disc type

Default screen

The default screen is displayed when the

player is in STOP mode. It may contain a

'Status Window' and a 'Temporary

Feedback Field'. This screen gives

information concerning prohibited actions,

playback modes, available angles, etc.

Tray status

–

TITLE

On Screen Display

information

DVD TITLE number

CHAP.

Temporary feedback field icons

DVD CHAPTER number

DISPLAY indications

Scan

–

TRACK/TOTAL TIME in hours, minutes

and seconds

REPEAT

REPEAT active

SHUFFLE

SHUFFLE active

DVD

DVD disc inserted

VCD

(Video)CD disc inserted

DVD MENU

DVD MENU active

3D SURROUND (for model FW-D5

only)

–

(for model FW-D5 only)

AC-3 active

SCAN

Repeat All

–

Repeat Title

Repeat Track

Repeat Chapter

Shuffle

–

SCAN active

–

Repeat A-B active

–

Remote control active (flashing)

FTS

Favourite Track Selection active

–

Shuffle Repeat

Repeat A to end

Repeat A-B

–

3D SURROUND active

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Automatic setting

The following items may have to be set in

INITIAL SETUP:

Turning On the power

1 Switch on the TV and select the video in

channel to which you connected your

DVD-Video player.

2 Press DVD.

™ The player display lights and the

"Initial Setup" screen appears.

Preparation

When settings will be taken from your TV

or Home Cinema system, the message

‘Auto configuring in process’ will appear.

Menus for which no settings are available

will be displayed. They have to be set

manually.

Menu language

NTSC/PAL Setting

Before viewing the DVD or VCD, ensure

that the PAL or NTSC setting of the system

matches your TV set.

The On Screen Menus will be displayed in

the language you choose. You can choose

from different languages.

Notes:

Audio language

1 Before connecting the system to the

power source, press and hold DVD and

à (on the system only). While holding

DVD and à, plug in the power cord.

2 After PAL or NTSC appears on the

display, release DVD and à at the

same time.

The ‘Initial Setup’ will only appear the very

first time you turn on the player. In ‘Initial

Setup’, you may have to set your personal

preferences for some of the player’s most

relevant items. See ‘Initial Setup’.

– Preferences have to be set in the order

in which the item menus will appear on

the screen.

– The ‘Initial Setup’ screen will only

disappear after the settings for the last

item have been confirmed.

– If any keys other than 3 or 4 or OK are

pressed, Ä will appear on the screen.

– If the player is switched off while

setting personal preferences, all

preferences have to be set again after

switching the player on again.

The sound will be in the

Initial Setup

language you choose if it

is available on the disc in

play. If the language you

select is not available,

speech will revert to the

first spoken language on

the disc. You can choose

from different languages.

Audio language

English

Español

Français

Português

Russian

Polish

Initial Setup

Manual Operation

After switching on the player for the very

first time, the ‘Initial Setup Screen’ will

appear.

™ The PAL or NTSC that appears on the

display indicates the current setting.

To change the setting, press ë within

3 seconds.

•

Subtitle language

™ After selected, the set will

automatically switch to the last

NTSC or PAL setting everytime the

DVD or VCD source is selected.

3 Remove the AC power plug from the

wall outlet, then reconnect the power

plug and switch on the system again.

The subtitles will be in the

language you choose if it

is available on the disc in

play. If the language you

select is not available,

subtitles will revert to the

first subtitle language on

the disc. You can choose

from different languages.

Initial Setup

The menu for the first item to be set is

displayed and the first option is

highlighted.

Subtitle language

English

Español

Français

Português

Russian

Polish

1 Use the 3 or 4 keys to go through the

options in the menu.

™ The icon of the selected option will

be highlighted.

2 Press OK to confirm your selection and

to go to the next menu.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:32 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

TV Shape

If you have a wide screen (16:9) TV, select

16:9.

• The menu bar can be accessed by

pressing any of the following keys on

the remote control: OSD MENU and

AUDIO.

• The various items can be selected by

pressing the OSD MENU button, then

the 4 or 3 keys or by pressing the

relevant keys on the remote control.

• Pressing OSD MENU while the menu

bar is displayed will clear the menu bar

from the screen.

• When selecting an item in the menu bar,

the selected item will be highlighted

and the appropriate cursor keys to

operate this item will be displayed

below the icon.

• < or > indicates that more items are

available at the left/right of the menu

bar. Press 1 or 2 to select these items.

OSD Menu

Personal preferences

You can set your personal preferences for

some of the player features : PICTURE,

SOUND, LANGUAGE and FEATURE.

If you have a regular (4:3) TV, select 4:3.

If you have a 4:3 TV, you can also select

between:

Letterbox for a ‘wide-screen’ picture with

black bars top and bottom, or Pan Scan, for

a full-height picture with the sides

trimmed. If a disc has Pan Scan, the picture

then moves (scans) horizontally to keep the

main action on the screen.

General operation:

1 Press OSD MENU on the remote

control.

2 Select V in the menu bar.

™ The Personal Preferences menu

appears.

• Use the 1 or 2 / 3 or 4 keys (or DVD

JOG) to toggle through the menus, sub

menus and submenu options.

™ When a menu item is selected, the

cursor keys (on the remote control) to

operate the item are displayed next

to the item.

A number of operations can be carried out

via the menu bar on the screen. The

following functions are available via the

menu bar:

Personal preference

Title/Track

PAN SCAN

LETTERBOX

Chapter/Index

Audio language

Subtitle language

Angle

3 Press OK to confirm and return to the

main menu.

}

Country

Select your country. This also is used as

input for the ‘Parental Control’ feature. (see

‘Access Control’)

Note:

– The DVD JOG can only move within one

direction at a time, either up/down or

left/right. Press AXIS on the system to

select the movement direction before

using DVD JOG.

Zoom

Note:

FTS-Video

– All these items may have to be set

during ‘Initial Setup’. After that, they

can always be changed in the Personal

Preferences Menu.

Sound

Picture by Picture

Slow motion

Fast motion

Time search

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

The following items can be adapted:

– Karaoke vocal (not available for all

versions)

Put this setting to ON only when a

multi-channel karaoke DVD is being

played. The karaoke channels on the

disc will then be mixed into a normal

stereo sound.

Sound

Features

Picture

– Access Control

Access Control contains the following

features:

– Digital output

– TV Shape

See ‘Initial Setup’

Factory setting: ALL. This means that

digital output is switched on. If you are

not connecting equipment with a digital

input, change the setting to OFF.

If your equipment doesn’t include a

digital multi-channel decoder, set the

digital output to PCM (Pulse Code

Modulation).

Child Lock…When Child Lock is set to

ON, a 4-digit code needs to

be entered in order to play

discs.

Parental control…Allows the

conditional presentation of

DVDs containing Parental

Control information. (see

‘Access Control’)

– Black level shift (NTSC only)

Adapts the colour dynamics to obtain

richer contrasts. Select ON or OFF.

– Speaker

Allows you to select speaker settings,

volume balance and delay time and to

test the speaker settings.

Speaker settings are only active on the

Analogue Multi-Channel Output (see

Appendix - page 30).

– Analogue output

Select Stereo, Surround, 3D Sound or

Multichannel.

– Status Window

Note:

Displays the current status of the player

and is displayed with the menu bar.

When disc playback is stopped, it is

displayed with the ‘Temporary Feedback

Field’ in the default screen.

– Video shift

– After selecting the desired Analogue

Output , if the message appeared on the

TV OSD and the system display screen

do not match with the setting, press

SURROUND CONTROL (or SURR on the

remote control) until the selected

setting reached.

The factory centres the video on your

screen. Use this setting to personalize

the position of the picture on your TV by

scrolling it to the left or right.

Factory setting is ON. Select OFF to

suppress display of the Status

Window.

– Night Mode

– Low power Standby (not applicable

Optimises the dynamics of the sound

with low volume playback.

for this model)

Language

– PBC (Playback Control)

The PBC can be set to ON or OFF (only

applicable for Video CD playback).

Select the required Menu, Audio and

Subtitle language. See ‘Initial Setup’.

Audio language and Subtitle language can

also be adapted via the Menu bar on the

screen.

– Beeper (not applicable for this model)

The beeper can be set to ON or OFF.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Authorising discs

• Insert the disc. See ‘Loading disc’.

™ The 'child protect' screen will appear.

– Multi-volume VCDs may have a different Activating/Deactivating Parental

Access control; child lock

(DVD and VCD)

ID for each volume. In order to make the

complete set ‘child safe’, each volume

has to be authorised.

Control

1 When disc playback is stopped, select

ACCESS CONTROL in the Features

menu using the 3 or 4 keys.

2 Enter your 4-digit code. If necessary,

enter the code a second time.

Deauthorising discs

• Insert the disc. See ‘Loading disc’.

™ Playback starts automatically.

• Press Ç while { is visible.

™ The | will appear and the disc is

now deauthorised.

Activating/deactivating the child lock

1 When disc playback is stopped, select

ACCESS CONTROL in the

features menu using the 3 or 4 keys.

2 Enter a 4-digit code of your own choice.

3 Enter the code a second time.

4 Move to Child lock using the 3 or 4

keys.

5 Move to LOCK/UNLOCK icons using

the 2 key.

6 Select LOCK icon using the 3 or 4

keys.

7 Press OK or 1 to confirm, then press 1

Access control; Parental

control (DVD-Video only)

You will be asked to enter your secret code

for ‘Play Once ‘or ‘Play Always.’ If you

select ‘Play Once’, the disc can be played

as long as it is in the player and the player

is ON. If you select ‘Play Always’, the disc

will become child safe (authorised) and can

always be played, even if the Child Lock is

set to ON.

3 Move to Parental Control using the 3 or

Movies on DVDs may contain scenes not

suitable for children. Therefore, disc may

contain ‘Parental Control’ information

which applies to the complete disc or to

certain scenes on the disc. These scenes

are rated from 1 to 8, and alternative, more

suitable scenes are available on the disc.

Ratings are country dependent. The

‘Parental Control’ feature allows you to

prevent discs from being played by your

children or to have certain discs played

with alternative scenes.

4 keys.

Notes:

– The player memory maintains a list of

50 authorised (‘Child safe’) disc titles. A

disc will be placed in the list when ‘Play

Always’ is selected in the ‘child protect’

screen. Each time a ‘child safe’ disc is

played, it will be placed on top of the

list. When the list is full and a new disc

is added, the last disc in the list will be

removed from the list.

– Double sided DVDs may have a different

ID for each side. In order to make the

disc ‘child safe’, each side has to be

authorised.

again to exit the menu.

4 Move to VALUE ADJUSTMENT (1-8)

using the 2 key.

5 Then use the 3 or 4 keys or the digit

keys ( 0-9) on the remote control to

select a rating from 1 to 8 for the disc

inserted.

™ Now unauthorised discs will not be

played unless the 4-digit code is

entered.

8 Select UNLOCK icon to deactivate the

Child Lock.

Note:

Rating 0 (displayed as ‘– –’):

Parental Control is not activated. The

Disc will be played in full.

– Confirmation of the 4-digit code is

necessary when the code is entered for

the very first time, changed or

cancelled.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Ratings 1 to 8:

5 Enter the new 4-digit code.

On this basis, Philips cannot warrant

functioning of the PARENTAL CONTROL

system and disclaims any liability of

unintended watching of disc content.

Playing a DVD

The disc contains scenes not suitable for 6 Enter the code a second time and

Playing a title

children. If you set a rating for the

player, all scenes with the same rating

or lower will be played. Higher rated

scenes will not be played unless an

alternative is available on the disc. The

reconfirm by pressing OK.

7 Press 1 to exit the menu.

1 After inserting the disc and closing the

tray, playback starts automatically.

™ The status window and the display

show the type of disc loaded, as well

as information about the disc’s

contents and playing time.

• The disc may invite you to select an

item from a menu. If the selections are

numbered, press the appropriate

numerical key; if not, use the 1 or 2 /

3 or 4 keys to highlight your selection,

then press OK.

If in doubt, please check the system with

the disc before you allow children access

or apply to the relevant disc publisher for

more information.

If you forget your 4 digit code

1 Press 9 to exit ‘Child Protect’ screen.

alternative must have the same rating or 2 Select ACCESS CONTROL in the

a lower one. If no suitable alternative is

found, play will stop and the 4-digit

code has to be entered.

Features menu using the 3 and 4 keys.

3 The 4-digit code can be cancelled by

pressing 9 four times in the ‘Access

Control’ dialog.

4 You can then enter a new code (twice!)

as described above (Changing the 4 digit

code).

Operation

6 Press OK or 1 to confirm, then press 1

again to exit the menu.

Loading discs

1 Press OPEN/CLOSE 0 on the front of

the player. The disc tray opens.

2 Load your chosen disc in the tray, label

side up (also when a double sided DVD

is inserted). Make sure it is sitting

properly in the correct recess.

3 Gently push the tray, or press OPEN/

CLOSE 0 to close the tray.

™ "READ" appears in the status

window and on the player display,

and playback starts automatically.

Country

™ The currently playing title and

chapter number are shown in the

menu bar and display.

1 When disc playback is stopped, select

ACCESS CONTROL in the Features

menu using the 3 or 4 keys.

2 Enter the 4-digit code.

3 Move to CHANGE COUNTRY using the

4 key.

Parental Control Disclaimer

This DVD player features the PARENTAL

CONTROL system which is intended to

activate when playing DVD discs made

with certain software coding. This is

according to technical standards adopted

by the set maker and disc content

industries.

™ The elapsed playing time is shown in

the status window and the display.

• For model FW-D5 only - If required, you

can use the SURROUND CONTROL (or

SURR on the remote control) key to

select Multichannel, Stereo, Surround or

3D-Surround. Play may stop at the end

of the Title, and the player may return to

the DVD menu. To go on to the next title,

press 2.

2 To stop play at any other time, press

Ç.

™ The default screen will appear, giving

information about the current status

of the player.

4 Press the 2 key.

5 Select a country using 3 or 4.

6 Press OK or 1 to confirm, then press 1

again to exit the menu.

Please note that the PARENTAL CONTROL

system will not operate if the DVD disc

does not have the appropriate software

coding. Also note that at the time of

release of this DVD player, certain aspects

of the said technical standards had not

been fully settled among the set maker and

the disc content industries.

Notes:

– If ‘Child Lock’ is set to ON and the disc

inserted is not in the ‘child safe’ list (not

authorised), the 4-digit code must be

entered and/or the disc must be

authorised. (see ‘Access Control’)

– The DVD tray will open or close only

when the system is in DVD mode.

Changing the 4-digit code

1 When disc playback is stopped, select

ACCESS CONTROL in the Features

menu using the 3 or 4 keys.

2 Enter the old code.

3 Move to CHANGE CODE using the 4

key.

4 Press the 2 key.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

• You can RESUME play from the point at

which you stopped play. Press 2 (PLAY);

when you see the RESUME icon . on

the screen, press 2 (PLAY) again.

™ The RESUME feature applies not only

to the disc in the player, but also to

the last four discs you have played.

Simply reload the disc, press

Note:

Moving to another chapter/index

When a title has more than one chapter or

a track has more than one index (which you

can see from the display and on the menu

bar), move to another chapter/index as

follows:

Playing a VCD

– When PBC mode is switched on,

RESUME play is not available.

Playing a disc

1 After inserting the disc and closing the

tray, playback starts automatically.

™ The status window and the display

show the type of disc loaded, as well

as information about the disc’s

contents and playing time.

• The disc may invite you to select an

item from a menu. If the selections are

numbered.

™ The currently playing track number is

shown in the menu bar and the

display. The elapsed playing time is

shown in the status window and the

display.

• For model FW-D5 only - If required, you

can use the SURROUND CONTROL (or

SURR on the remote control) key to

select Multichannel, Stereo, Surround or

3D-Surround.

2 To stop play at any time, press Ç.

™ The default screen will then appear.

• You can RESUME play from the point at

which you stopped play. Press 2 (PLAY);

when you see the RESUME icon . on

the screen, press 2 (PLAY) again.

™ The RESUME feature applies not only

to the disc in the player, but also to

the last four discs you have played.

Simply reload the disc, press

General features

Note:

1 Select X (CHAPTER/INDEX) in the menu

bar.

2 Press ë briefly during play to select

– Unless stated otherwise, all operations

described are based on remote control

operation. A number of operations can

also be carried out via the menu bar on

the screen.

2 (PLAY); when you see the RESUME

icon . on the screen , press

2 (PLAY) again.

the next chapter/index.

• Press í briefly during play to return to

the beginning of the current chapter/

index. Press í twice briefly to step

back to the previous chapter/index.

• To go directly to any chapter or index,

enter the number using the digit keys

(0-9).

Note:

– Since it is usual for DVD movies to be

released at different times in

different regions of the world, all

players have region codes. Discs can

have an optional region code. If you load

a disc of a different region code into

your player, you will see the region code

notice on the screen. The disc will not

play and should be removed from the

player.

Moving to another title/TRACK

When a disc has more than one title or

track (which you can see from both the

menu bar and the display), you can move to

another title/track as follows:

3 To exit, press 1 or 2.

1 Select W (TITLE/TRACK) in the menu

bar.

2 Press ë briefly during play to select

Note:

– If the number has more than one digit,

press the keys in rapid succession.

the next title/track.

•

Press í briefly during play to return to

the beginning of the current title/track.

Press í briefly again to step back to

the previous title/track.

3 To exit, press 1 or 2.

2 (PLAY); when you see the RESUME

icon . on the screen , press

2 (PLAY) again.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Still Picture and Frame-by-frame

playback

1 Select e (PICTURE BY PICTURE) in

the menu bar.

2 Use the 4 key to enter the picture by

picture menu.

™ The player will go into PAUSE mode.

3 Use the cursor keys 1 or 2 to select the

previous or next picture frame.

4 To exit Picture by picture mode, press

2 (PLAY) or 3 on the remote control.

™ REPEAT TITLE appears on the display.

To repeat the entire disc, press REPEAT

a third time.

™ ^REPEATappears on the display.

To exit Repeat mode, press REPEAT a

fourth time.

Shuffle

4 Press OK to confirm the start time.

•

™ The time edit box will disappear and

play starts from the selected

time position on the disc.

DVDs

This shuffles the playing order of chapters

within a title, if the title has more than one

chapter.

• Press SHUFFLE during play.

™ ^SHUFFLEappears on the screen for

about two seconds.

Zoom

The Zoom function allows you to enlarge

the video image and to pan through the

enlarged image.

Video-CDs - Repeat track/disc

To repeat the track currently playing,

press REPEAT.

™ REPEAT TRACK appears on the display.

To repeat the entire disc, press REPEAT

a second time.

™ REPEAT appears on the display.

To exit Repeat mode, press REPEAT a

third time.

•

• To return to normal play, press

SHUFFLE again.

1 Select a (ZOOM) in the menu bar.

2 Press 3 or 4 to activate the ZOOM

function and select the required zoom

factor: 1.33 or 2 or 4.

™ The player will go into PAUSE mode.

™ The selected zoom factor appears

below the Zoom icon in the

menu bar and ‘Press OK to pan’

appears below the menu bar.

™ The picture will change accordingly.

3 Press OK to confirm the selection.

™ The panning icons appear on the

screen: 1 or 2 / 3 or 4 and OK.

4 Use the 1 or 2 / 3 or 4 keys to pan

across the screen.

5 When OK is pressed only the zoomed

picture will be shown on the screen.

6 If you wish to zoom at any moment,

press a (ZOOM) and select the

required zoom factor as described

above.

VCDs

This shuffles the playing order of the

tracks, if the disc has more than one track.

• Press SHUFFLE during play.

™ ^SHUFFLEappears on the screen for

about two seconds.

• To return to normal play, press

SHUFFLE again.

1 Select g (FAST MOTION) in the menu

bar.

2 Use the 4 keys to enter the Fast Motion

menu.

3 Use the 1 or 2 keys to select the

required speed: -32, -8 or -4

(backward), or +4, +8, +32 (forward).

4 Select 1 to play at normal speed again.

5 To exit Fast Motion mode, press

2 (PLAY) or 3 on the remote control.

Repeat A-B

To repeat a sequence in a title:

• Press Repeat A-B at your chosen

starting point;

™ ^A- appears briefly on the screen.

• Press Repeat A-B again at your chosen

end point;

™ A-B repeat appears briefly on the display,

and the repeat sequence begins.

• To exit the sequence, press Repeat A-B.

Time search

The Time Search function allows you to start

playing at any chosen time on the disc.

To search forward or backward through

different speeds, you can also hold down

à or á.

1 Select h (TIME SEARCH) in the menu

bar.

2 Press 4.

™ The player will go into PAUSE mode.

™ A time edit box appears on the

screen, showing the elapsed playing

time of the current disc.

3 Use the digit keys ( 0-9) to enter the

required start time. Enter hours, minutes

and seconds from right to left in the box.

™ Each time an item has been entered,

the next item will be highlighted.

Repeat

Scan

DVD-Video Discs - Repeat chapter/

title/disc

Plays the first 10 seconds of each chapter/

index on the disc.

• Press SCAN.

• To continue play at your chosen chapter/

index, press SCAN again or press

2 (PLAY) on the remote control.

7 To exit Zoom mode, press 2 (PLAY),Ç

or OSD MENU.

™ If you press 2 (PLAY), playback will

resume.

•

To repeat the chapter currently playing,

press REPEAT.

™ ^{REPEAT CHAPTER}appears on the display.

To repeat the title currently playing,

press REPEAT a second time.

•

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

FTS-Video

3 Press OK if you wish to store the entire

title/track.

™ The title/track number will be added

to the list of selections.

When your FTS Program is complete, press

É(PLAY) to start play, or Ç to go back to

Stop mode. In either case, the FTS Program

will be automatically memorised.

Disc menu

1 Select W (TITLE/TRACK) in the menu

bar, then press DVD MENU.

™ The disc menu is displayed.

• To remove the disc menu, select W

(TITLE/TRACK) in the menu bar, then

press DVD MENU again.

– The FTS-Video function allows you to

store your favourite titles and chapters

(DVD) and favourite tracks and indexes

(VCD) for a particular disc in the player

memory.

– Each FTS programme can contain 20

items (titles, chapters).

– Each time an FTS programme is played

it will be placed on top of the list. When

the list is full and a new programme is

added, the last programme in the list

will be removed from the list.

– The selections can be played at any time.

– For VCD, FTS programme is not available

whenever PBC mode is switched on.

Storing chapters/indexes

1 Press 4 on the selected title/track

number.

™ The title/track number will be marked

and the highlight moves to the first

available chapter/index number for

this title/track.

Special DVD-features

Checking the contents of DVD : Menus

For titles and chapters, selection menus

may be included on the disc. The DVD’s

menu feature allows you to make

Camera Angle

If the disc contains sequences recorded

from different camera angles, the angle

icon appears, showing the number of

available angles and the angle being

shown currently. You can then change the

camera angle if you wish.

selections from these menus.

2 Use 1 or 2 to select the required

chapter/index number.

• Press the appropriate digit keys (0-9);

or use the 1 or 2 / 3 or 4 keys to

highlight your selection, then press OK.

3 Press OK to confirm the selection.

™ The title-chapter/track-index selection

will be added to the list of selections.

4 Press OSD MENU to exit the FTS-

Video c menu.

1 Select } (ANGLE) in the menu bar.

2 Use the 3 or 4 keys to select the

required angle in the angle icon.

™ After a small delay, play changes to

the selected angle. The angle icon

remains displayed until multiple

angles are no longer available.

Title menus

1 Press DVD MENU.

™ If the current title has a menu, the

menu will appear on the

screen. If no menu is present in the

title, the disc menu will be

displayed.

2 The menu can list camera angles,

spoken language and subtitle options,

and chapters for the title.

3 To remove the title menu, press DVD

MENU again.

Erasing a FTS-Video Program

1 In STOP mode, select FTS-Video c in

the menu bar.

2 Use 4 to select PROGRAM.

3 Use 1 or 2 to select the required

selection number.

Storing a FTS-Video Program

1 In STOP mode, select FTS-Video c in

the menu bar.

2 Press 4 to open the menu.

™ The FTS-Video menu appears.

4 Press OK to erase the selection.

5 Press OSD MENU to exit.

Changing the audio language

1 Select Y (AUDIO) in the menu bar or

press AUDIO on the remote control.

2 Press 3 or 4 repeatedly to see the

different languages.

If you wish to erase all selections:

1 In STOP mode, select FTS-Video c in

the menu bar.

Storing titles/tracks

2 Use 4 to select CLEAR ALL.

3 Press OK.

™ All selections will now be erased.

4 Press OSD MENU to exit.

1 Press 4 to select TITLES/TRACK.

2 Use 1 or 2 to select the required title/

track.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Subtitles

Notes:

Pause

Repeat A-B

To repeat a sequence:

1 Select Z (SUBTITLE) in the menu bar.

2 Press 3 or 4 repeatedly to see the

different subtitles.

– When PBC menu consists of more than

one page, use í or ë keys to go

through the pages.

• Press ; during play.

• To return to play, press 2 (PLAY).

•

Press Repeat A-B at your chosen

starting point;

– When PBC mode is switched on,

RESUME play, Repeat A-B, SCAN and

SHUFFLE are not functional.

Moving to another track

• Press ë briefly during play to go to the

next track.

• Press í briefly during play to return to

the beginning of the current track. Press

í briefly again to step back to the

previous track.

™ A- appears briefly on the player

display.

Press Repeat A-B again at your chosen

end point;

™ ^A-B appears briefly on the display,

and the sequence begins to play

repeatedly.

•

Playing an audio CD

Special VCD-Features

Playback Control (PBC)

• To go directly to any track, enter the

track number using the digit keys (0-9).

•

To exit the sequence, press Repeat A-B

again.

PBC ON

1 Load a Video CD with PBC and press

PBC to switch on PBC mode.

2 Press 2(PLAY).

Shuffle

Scan

• Press SHUFFLE during play.

™ The order of the tracks is changed.

• To return to normal play, press

SHUFFLE again.

Plays the first 10 seconds of each track on

the disc.

• Press SCAN.

• To continue play at your chosen track,

press SCAN again or press 2 (PLAY).

™ The PBC menu appears on the TV

screen.

•

Go through the menu with the keys

indicated on the TV screen until your

chosen passage starts to play. If a PBC

menu consists of a list of titles, you can

select a title directly.

Repeat track/disc

•

To repeat the track currently playing,

press REPEAT.

™ ^{REPEAT TRACK}appears on the display.

To repeat the entire disc, press REPEAT

a second time.

™ ^REPEATappears on the display.

To exit Repeat mode, press REPEAT a

third time.

FTS (Favourite Track Selection)

– The FTS feature allows you to store your

favourite tracks for a particular disc in

the player memory.

– Each FTS programme can contain 20

tracks.

– Each time an FTS programme is played it

will be placed on top of the list. When

the list is full and a new programme is

added, the last programme in the list

will be removed from the list.

– The selections can be played at any

time.

1 After loading the disc, playback starts

automatically.

• If the TV is on, the Audio CD screen

appears.

™ The number of tracks and the total

playing time will be shown on the

screen and on the player display.

™ During play, the current track number

and its elapsed playing time will be

shown on the screen and on the

player display.

2 Playback will stop at the end of the disc.

• To stop play at any other time, press

Ç.

3 Enter your choice with the digit keys

(0-9).

4 Press RETURN to go back to the

previous menu.

When PBC OFF

1 Press PBC to switch off PBC mode.

2 Playback will resume when press

2 (PLAY).

™ The PBC menu does not appear on

the TV screen.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

Switching FTS ON/OFF

1 Use 3 or 4 to move to the top.

2 Use 1 or 2 to select either ON or OFF.

Subwoofer

On:

Off:

Appendix

When you connect a subwoofer

When the subwoofer is not

connected.

6 Channel settings

Front speakers

L (Large): When the front speakers can

reproduce low frequency

signals below 120Hz

S (Small): When the front speakers

cannot produce low frequency

signals below 120Hz

Erasing a track from an FTS-

programme

1 Use 4 to go to the list of selected

tracks in programme.

2 Use 1 or 2 to select the track number

you wish to erase.

3 Press OK.

™ The track number will be erased from

the list of selected tracks.

* You can use your TV as centre speaker.

When centre speaker is turned on, the

audio L/R as well as the audio from the

scart will contain the centre speaker

audio.

Center

speaker

Centre speaker*

Storing an FTS Program

L (Large): When the centre speaker can

reproduce low frequency

1 Load a disc and stop playback.

2 Use 4 to go to the list of available

tracks.

3 Use 1 or 2 to select tracks from the list.

To go directly to any track, enter the

track number using the digit keys (0-9).

4 Store each track by pressing OK.

™ The track numbers will be added to

the list of selected tracks.

™ The number of tracks and the playing

time of the programme will be

shown on the screen and the player

display.

Erasing the complete programme

• Use 4 to select CLEAR ALL and press

OK.

™ The complete FTS programme for the

disc will be erased.

Front speaker

left

Front speaker

right

signals below 120Hz

S (Small): When the centre speaker

cannot produce low frequency

signals below 120Hz

Off:

When the centre speaker is not

connected.

Rear speaker

(left surround)

Rear speaker

(right surround)

Surround speakers

Delay times

L (Large): When the surround speakers

can reproduce low frequency

signals below 120Hz

S (Small): When the surround speakers

cannot produce low frequency

signals below 120Hz

The DVD player is set to reproduce

correctly synchronised Digital Surround

Sound in a listening area where the

surround speakers are about 150cm nearer

to the listening position than the front

speakers, and the centre speaker is in line

with the front speakers. To adjust for other

listening area arrangements, certain delay

times required.

When your FTS Program is complete, press

É(PLAY) to start play, or Ç to go back to

Stop mode. In either case, the FTS Program

will be automatically memorised.

Off:

When the surround speakers

are not connected.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD-VIDEO

7 Adjust the MIC LEVEL control.

8 Adjust ECHO -/+ ( j ) to the level

you desire.

9 Adjust KEY CONTROL -/+ ( k ) to

change the key of your vocal range.

10 Select the different MODE SELECTION

l you desire. (see Karaoke General

Features).

11 Shift to VOCAL m to fade out the

original vocal from a karaoke disc.

When you start singing or talking

through the microphone, the original

vocal will fade out automatically.

12 Shift to VOCAL CANCEL to cancel out

the original vocal from the sound.

13 Press KARAOKE button to exit the

menu screen.

Vocal ( m )

Available options for vocal are:.

General features

Setting up Karaoke (in DVD

mode only)

•

Karaoke ON/OFF ( i )

–

normal mode, all music

and vocals are played.

•

To switch karaoke features ON/OFF

mode.

CANCEL – cancel original vocals.

FADE

–

removes original vocals

when you start singing

through the microphone.

Echo -/+ ( j )

MIC LEVEL

•

Can be adjusted in the range of

{0.....+7).

MIC

Key Control -/+ ( k )

•

Can be adjusted in the range of

{-7 ......0.....+7).

(not available for all versions)

1 Load a karaoke disc into the player.

2 Set the MIC LEVEL control to the

minimum level to prevent acoustic

feedback (e.g. loud howling sound)

before connecting the microphone.

3 Connect a microphone to MIC socket.

4 Press 2 (PLAY) to start playback.

5 Press KARAOKE on the remote

control to switch on the Karaoke mode.

6 Karaoke menu bar appears.

Mode Selection ( l )

• Works correctly only on karaoke disc.

• Only two channels are available.

• For VCD Karaoke disc,

™ Selection between L+R / L / R

L+R -

L -

R -

Left + Right

Left

Right

• For DVD Karaoke disc,

™ Selection between M1 / M2 / V1 / V2

M1 -

M2 -

V1 -

V2 -

All channels

™ Move to the function you want to

change using 3 or 4 keys then use

1 or 2 keys to scroll to your

Music channels only

Vocal 1 output

Vocal 2 output

preferred option.

Note:

– In the karaoke disc, karaoke L, R, M1,

M2, V1, V2 are recorded. In some

discs, the M1, M2, V1, V2 may not be

recorded in the disc.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Discs for playback

CD Direct Play

DISC CHANGE

OPEN•CLOSE

This system can play all digital audio CD,

finalised digital audio CD-Recordable and

finalised digital audio CD-Rewritable

format discs.

• You can play a CD directly by pressing

the CD 1, CD 2 or CD 3 button. The CD

player will stop at the end of playback of

the selected disc.

CD 1

CD 2

CD 3

C H A N G E R

™ A lit button indicates that a disc is

loaded in the disc tray.

™ The selected disc is encircled.

DVD MINI HIFI SYSTEM

STANDBY

NEWS / T.A.

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

Playing a CD

RDS/CD TEXT

Loading the CD Changer

1 Press CD to select CD mode.

2 Press OPEN•CLOSE.

™ The CD carousel tray slides out.

3 Load a CD with the printed side up in

the right tray.

• You can load another disc in the left

tray.

SURROUND CONTROL

5.1CH

STEREO

SURR

1 Press 2 (PLAY) to start playback.

™ The disc tray, track number and

elapsed playing time of the current

track appear on the display.

• To interrupt playback, pressÅ.

™ The playing time flashes.

• To resume playback, press 2 (PLAY)

again.

VCD • CD

DVD

CD 1 • 2 • 3

BAND

TUNER

CDR

AUX

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

VOLUME

CLOCK/

TIMER

PROG

DIM

DVD

AXIS

DVD JOG

SOUND JOG

• To load the third disc, press the DISC

CHANGE button.

2 To stop playback, press Ç.

™ The CD carousel will rotate until the

empty tray is ready for loading.

4 Press OPEN•CLOSE to close the CD

carousel tray.

™ The total number of tracks and the

playing time of the selected disc

appear on the display.

Notes:

Warning!

– All the available discs will play once,

then stop.

– When the CD has stopped playing, the

system will switch to standby mode

after 30 minutes if no button is pressed.

1) This system is designed for conventional CDs. Do not use any accessories

such as disc stabilizer rings or CD treatment sheets, etc., which may damage

the CD mechanism.

2) Do not load more than one disc into each tray.

3) When the CD carousel tray is loaded with CDs, do not turn over or shake the

system. This may jam the changer.

Note:

You may load three discs in the CD carousel tray for continuous playback without

interruption.

– To ensure good system performance,

wait until the CD changer completely

reads the disc(s) before proceeding.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting a desired track during

playback

• Press í or ë (or Digit 0-9 on the

remote control) until the desired track

appears on the display.

™ The selected track number and

elapsed playing time appear on the

display.

• If you press í once it will skip to the

beginning of the current track and play

the track again.

– If the system is reading the disc,

programming is not possible,

"READING" will be displayed and

followed by "DISC X" "X" is the

current read disc number.

– During programming, if no button is

pressed within 20 seconds, the system

will exit programme mode

Disc Change

You can change the outer two discs while

the third inner disc is stopped or is playing.

Programming Tracks

Programming tracks of a loaded CD is

possible when playback is stopped. The

display will indicate the total tracks stored

in the programme. Up to 40 tracks can be

stored in the memory in any order. When

40 tracks are stored and you attempt to

store another track, the display will show

"PROGRAM FULL".

1 Press DISC CHANGE.

™ The CD carousel tray slides out.

2 Replace the discs in the left and right

disc trays.

• If you wish to change the inner disc

during playback, press DISC CHANGE

again.

™ "DISC CHANGE" will be displayed.

™ The CD will stop playing.

™ The CD carousel tray will close to

retrieve the inner CD then open again

with the inner CD accessible.

3 Press OPEN•CLOSE to close the CD

carousel tray.

automatically.

1 Load the desired discs in the disc trays.

2 Press PROG to start programming.

™ The ^PROGstarts flashing.

3 Press the CD (CD 1•2•3) or CD 1/2/3

button to select the disc.

4 Press í or ë (or Digit 0-9 on the

remote control) to select the desired

track.

5 Press PROG to store the track.

• Repeat steps 3 to 5 to store other discs

and tracks.

6 Press Ç once to end programming.

™ The total number of tracks

programmed and total playing time

appear on the display.

Reviewing the programme

Reviewing of the programme is possible

only when playback is stopped.

1 Press í or ë repeatedly to review

the programmed tracks.

Note:

– Pressingí during shuffling can only

skip to the beginning of the current

track.

2 Press Ç once to exit review mode.

Searching for a particular

passage during playback

• Press and hold à or á until the

desired passage is located.

™ The volume will be reduced.

• Play returns to normal when à or á

is released.

Playing the programme

1 Press 2 (PLAY) to start programme

playback.

™ "PLAY PROGRAM" will be

displayed.

™ The track number and elapsed

playing time of the current track will

appear on the display.

• If you press REPEAT during programme

playback, the current track or all

programmed tracks will be played

repeatedly.

™ "TRACK" or "PROGRAM" will be

displayed.

Selecting a desired track

Selecting a desired track when

playback is stopped

1 Press í or ë (or Digit 0-9 on the

remote control) until the desired track

appears on the display.

2 Press 2 (PLAY) to start playback.

™ The selected track number and

elapsed playing time appear on the

display.

Notes:

– If the total playing time is more than

"99:59" or if one of the programmed

tracks has a number greater than 30,

then "--:--" appears on the display

instead of the total playing time.

™ The ^REPEATand PROG appear on the

display.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press Ç to stop programme playback.

Shuffle (only on remote control)

Repeat (only on remote control)

You can play the current track, a disc or all

available discs repeatedly.

Notes:

In shuffle mode, the system plays all the

available discs and their tracks in random

order. Shuffle may be used also when

tracks are programmed.

– If you press any of the CD DIRECT PLAY

buttons, the system will play the

selected disc or track and the stored

programme will be ignored temporarily.

The ^PROGdisplay also will disappear

temporarily from the display. It will

reappear when playback of the selected

disc ends.

1 Press REPEAT on the remote control to

select the various repeat modes.

™ "TRACK", "DISC", "ALL DISC" or

"OFF" will be displayed.

™ The ^REPEATappears on the display.

• The selected track, selected disc or all

available discs will now be played

repeatedly until you press Ç.

2 Press REPEAT until the "OFF" mode is

displayed to resume normal playback.

™ The ^REPEATdisappears from the

display.

To shuffle all the discs and tracks

1 Press SHUFFLE.

™ "SHUFFLE" will be displayed.

™ The SHUFFLE, the disc and the track

selected at random appear on the

display.

• The discs and the tracks will be played

in random order until you press Ç.

• If you press REPEAT during shuffling,

the current track or all available discs

will be played repeatedly.

™ "TRACK" or "ALL DISC" will be

displayed.

™ The ^REPEATand SHUFFLE appear on the

display.

2 Press SHUFFLE again to resume normal

playback.

™ The ^SHUFFLEdisappears from the

display.

– REPEAT DISC mode is not available

when programme playback begins.

Erasing the programme (when

playback is stopped)

• Press Ç.

™ "PROGRAM CLEARED" will be

displayed.

Notes:

– REPEAT DISC mode is not available

during programme play or shuffle mode.

– You can also repeat shuffling a

programme.

™ "TRACK" or "PROGRAM" will be

displayed.

Note:

– The programme will be erased when the

system is disconnected from the power

supply or when the CD carousel tray is

opened.

™ The REPEAT, PROG and SHUFFLE appear

on the display.

Note:

– REPEAT DISC mode is not available

when shuffle is selected.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TUNER

– If you want to reserve a section of

Storing Preset Stations

DVD MINI HIFI SYSTEM

preset numbers, for example preset

numbers 1 to 9, select preset 10 before

starting automatic programming, only

the preset numbers 10 to 40 will be

programmed.

STANDBY

NEWS / T.A.

You can store up to 40 radio stations in the

memory. When a preset radio station is

selected, the preset number appears next

to the frequency on the display.

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

RDS/CD TEXT

SURROUND CONTROL

5.1CH

STEREO

SURR

VCD • CD

CD 1 • 2 • 3

BAND

TUNER

CDR

DVD

AUX

Automatic programming

1 Press TUNER (BAND).

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

Manual programming

1 Press TUNER (BAND).

VOLUME

2 Press PROG for more than one second.

™ The ^PROGstarts flashing and "AUTO"

will be displayed.

™ The system will search for every

available radio station in the FM

waveband first, then search the MW

waveband.

™ All available radio stations will be

stored automatically. The frequency

and preset number will be displayed

briefly.

™ The system will stop searching when

all the available radio stations are

stored or when the memory for 40

preset radio stations is used.

™ The system will remain tuned to the

last stored preset radio station.

CLOCK/

TIMER

PROG

DIM

2 Press TUNER (BAND) again to select

the desired waveband : FM or MW.

3 Press PROG for less than one second.

™ The PROG starts flashing.

™ The next available preset number will

be displayed for selection.

DVD

AXIS

DVD JOG

SOUND JOG

4 Press à or á to tune to the desired

frequency.

Note:

• Repeat this procedure until the desired

radio station is reached.

• To tune to a weak radio station, briefly

press à or á repeatedly until the

display shows the desired frequency

and/or when the best reception has

been obtained.

– For 'EASY SET' feature, please refer to

• If you wish to store the radio station to

another preset number, press í or ë

(or Digit 0-9 on the remote control) to

select the desired preset number.

5 Press PROG again.

™ The PROG disappears and the radio

station will be stored.

• Repeat steps 3 – 5 to store other preset

page 14.

Tuning to radio stations

1 Press TUNER (BAND) to select TUNER

mode.

™ "TUNER" will be displayed.

A few seconds later, the current radio

frequency will be displayed.

radio stations.

2 Press TUNER (BAND) again to select

the desired waveband : FM or MW.

3 Press à or á for more than one

second, then release.

™ The display will show "SEARCH"

until a radio station with sufficient

signal strength is found.

Notes:

– You can cancel the automatic

programming by pressing PROG orÇ

(on the system only).

– When 40 radio stations are stored and

you attempt to store another radio

station, the display will show

"PROGRAM FULL". If you want to

change an existing preset number,

repeat steps 3 – 5.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TUNER

– You can cancel manual programming by

pressing Ç (on the system only).

– During programming, if no button is

pressed within 20 seconds, the system

will exit programme mode

Changing the MW tuning grid

(not available for version /30)

The frequency step can be changed if

necessary. In North and South America, the

frequency step between adjacent channels

in the MW band is 10 kHz. In other parts of

the world, it is 9 kHz. The frequency step

presetted in the factory is 9 kHz.

automatically.

Tuning to Preset Radio

Stations

• Press í or ë (or Digit 0-9 on the

remote control) to select the desired

preset number.

For MW band

To change from 9 kHz to 10 kHz or vice

versa

Changing of tuning grid will erase all

previously stored preset stations.

™ The preset number, radio frequency,

and waveband appear on the display.

1 Disconnect the system from the AC

power supply (pull out the AC power

cord).

2 Press TUNER and TUNING á

depressed while reconnecting the

system to the AC power supply.

™ Display will show "GRID 9" or

"GRID 10".

Notes:

– GRID 9 indicates that the tuning grid is

in step of 9 kHz in MW band. GRID 10

indicates that the tuning grid is in step

of 10 kHz in MW band.

– FM tuning grid will also be changed

from 50 kHz to 100 kHz or vice versa.

All preset radio stations will also be

erased.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

AUX/CDR

CLOCK

DVD MINI HIFI SYSTEM

STANDBY

NEWS / T.A.

LEFT

CENTER RIGHT

LEFT

CENTER RIGHT

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

FTS TITLE

CHAP.

FM LW

SLEEP DIM TIMER

P5 P6

SURR CHANNEL SURR

POWER SAVE

IR SENSOR

POWER SAVE

IR SENSOR

RDS/CD TEXT

SURROUND CONTROL

5.1CH

STEREO

SURR

5.1CH

STEREO

SURR

VCD • CD

CD 1 • 2 • 3

BAND

TUNER

CDR

VCD • CD

CD 1 • 2 • 3

BAND

TUNER

CDR

DVD

AUX

DVD

AUX

▲

PRESET

▲

PRESET

▲

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

SEARCH•TUNING

STOP•CLEAR PLAY PAUSE

PREV SIDE NEXT

VOLUME

CLOCK/

TIMER

CLOCK/

TIMER

PROG

DIM

PROG

DIM

DVD

AXIS

DVD JOG

SOUND JOG

DVD JOG

SOUND JOG

Notes:

Selecting External Equipment

View Clock

Clock Setting

– There are two Auxiliary modes:

i. the normal AUX mode.

ii. the CDR mode, where the LINE OUT

of this mini system is muted. You will

not be able to record or listen to the

sound from the LINE OUT.

– You are advised not to listen to and

record from the same source

simultaneously.

If you have connected the audio out

terminals of the external equipment (TV,

VCR, Laser Disc player, DVD player, or CD

Recorder) to the AUX/CDR IN terminals,

you can hear the enhanced sound from the

system.

You can view the clock (if it is set) if the

system is in Standby mode or when any

sound source is selected (CD, TUNER, etc.).

The clock will be displayed for about seven

seconds.

The clock can be set in either 12- or 24-

hour mode, e.g. "AM 12:00" or

"00:00". Before setting the clock, you

must be in the View Clock mode.

1 Press CLOCK/TIMER to select clock

mode.

• Press CLOCK/TIMER briefly.

™ "PM 10:38 or 22:38" (the

current time) will be displayed

depending on whether you have

selected 12- or 24-hour mode.

™ "--:--" will be displayed if the

clock is not set.

1 Press AUX (CDR) to select the CDR

mode.

™ "CDR" will be displayed.

2 Press AUX (CDR) again to select

external (normal AUX) mode.

™ "AUX" will be displayed.

2 Press PROG (on the system only) to

select 12- and 24- hour mode.

™ If 12-hour mode is selected,

"AM 12:00" starts flashing.

™ If 24-hour mode is selected, "00:00"

starts flashing.

– All the sound control features (e.g. DSC,

DBB, etc.) are available for selection.

3 Set the hour with à or á on the

system.

4 Set the minute with í or ë on the

system.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER

5 Press CLOCK/TIMER again to store the

setting.

™ The clock starts.

• To exit without storing the setting, press

Ç on the system.

5 Press CLOCK/TIMER to store the start

time.

™ The timer is now set.

™ The ^TIMERremains on the display.

• At the preset time, the timer will be

activated.

Timer Setting

• The system can switch on to CD or

TUNER mode automatically at a preset

time. It can serve as an alarm to wake

you up.

Notes:

• Before setting the timer, make sure the

clock is set correctly.

• The timer will always be switched on

once it is set.

™ The selected source will be played.

– During clock setting, if no button is

pressed within 90 seconds, the system

will exit clock setting mode

automatically.

– When a power interruption occurs, the

clock setting is erased.

Notes:

– During timer setting, if no button is

pressed within 90 seconds, the system

will exit timer setting mode

•

The volume of the timer will

increase from the minimum level

until the volume level before the set

is switched to standby mode.

automatically.

– If the source selected is TUNER, the last

tuned frequency will be switched on.

– If the source selected is CD, playback

will begin with the first track of the

selected disc or programme. If the CD

trays are empty, TUNER will be selected

instead.

1 Press and hold CLOCK/TIMER for more

than 2 seconds to select timer mode.

™ "AM 12:00" or "00:00" or the last

timer setting starts flashing

depending on whether you have

selected 12- or 24-hour mode.

™ The ^TIMERstarts flashing.

™ The selected source is lit while other

available sources are flashing.

2 Press CD or TUNER to select the

desired source.

To switch off the TIMER

•

Press TIMER on the remote control.

™ The timer is now switched off.

™ The display will show "CANCEL"

and the ^TIMERdisappears.

• Before selecting CD, make sure a CD is

loaded in the CD tray.

3 Press à or á on the system to set

the hour for the timer to start.

4 Press í or ë on the system to set

the minute for the timer to start.

To start the TIMER again (for the same

preset time and source)

•

Press TIMER on the remote control.

™ The timer is now on.

™ The ^TIMERappears on the display.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

S-Video output ......................................... Y: 1 Vpp (75 Ω)

SURROUND SPEAKERS (FW-D5)

Specifications

System ........................................................ closed satellite

Impedance .................................................................... 6 Ω

Speaker Driver ........................................... 1 x 3” full range

Dimensions (w x h x d) ..................... 230 x 130 x 155 (mm)

Weight .............................................................. 1.2 kg each

............................................................. C: 0.3 Vpp (75 Ω)

AMPLIFIER

Output power

CD PLAYER

FW-D5 ......................... 3000 W PMPO / 2 x 50 W RMS⁽¹⁾

Left/Right Channel ........................... 2 x 50 W RMS⁽¹⁾

Centre Channel ........................................... 50 W, 6 Ω

Surround Channel ................................. 2 x 50 W, 6 Ω

FW-D1 ......................... 1200 W PMPO / 2 x 50 W RMS⁽¹⁾

Signal-to-noise ratio .................................... ≥ 75 dBA (IEC)

Frequency response ......................... 20 – 20000 Hz, 3 dB

Input sensitivity

Number of programmable tracks .................................... 40

Frequency response ...................................... 20 – 20000 Hz

Signal-to-noise ratio ............................................. ≥ 76 dBA

Channel separation .................................... ≥ 79 dB (1 kHz)

Total harmonic distortion ........................... < 0.02% (1 kHz)

GENERAL INFORMATION

Material/finish ...................................... Polystyrene/Metal

AC Power

For Version /21-21M ................ 110 – 127 / 220 – 240 V;

.................................................... 50/60 Hz Switchable

For Version /30................................. 230 – 240 V; 50 Hz

Power Consumption

TUNER

FM wave range ........................................... 87.5 – 108 MHz

MW wave range (9 kHz) .............................. 531 – 1602 kHz

MW wave range (10 kHz) ............................ 530 – 1700 kHz

Tuning grid ............................................................. 9/10 kHz

Number of presets ............................................................ 40

Antenna

AUX In / CDR In ............................................ 500 mV / 1V

Output

Speakers ................................................................. ≥ 6 Ω

Centre Speaker (for FW-D5 only) ........................... ≥ 6 Ω

Surround Speakers (for FW-D5 only) ...................... ≥ 6 Ω

Headphones............................................. 32 Ω – 1000 Ω

Subwoofer Out ............................ 1.5 V 2dB, > 22000 Ω

Line Out .......................................... 1 V 2dB, > 22000 Ω

Digital Out ......................................................... 1 coaxial

................................................ IEC 958 for CDDA / LPCM

............................ IEC1937 for MPEG1, MPEG2 and AC-3

Surround Out wireless (for FW-D5 only) ............. 750 mV,

2dB, > 22000 Ω

Active

FW-D5 .............................................................. 230 W

FW-D1 .............................................................. 130 W

Standby

FW-D5 ............................................................. < 24 W

FW-D1 .............................................................. < 24 W

Dimensions (w x h x d) ...................... 265 x 310 x 390 (mm)

Weight (without speakers) ...................................... 10.8 kg

FM................................................................. 75 Ω wire

AM ........................................................... Loop antenna

SPEAKERS

System ............... Shielded 2-way; double port bass reflex

Impedance .................................................................... 6 Ω

Woofer ..................................................................... 1 x 6.5"

Tweeter .................................................................... 1 x 2.5"

Dimensions (w x h x d) ..................... 240 x 310 x 315 (mm)

Weight ............................................................ 3.85 kg each

Subject to modification

(1) (6 Ω, 1 kHz, 10% THD)

DVD-VIDEO PLAYER

Playback System ............................... DVD-Video/ Video CD

CD (CD-R & CD-RW)

Video

DA converter ......................................................... 10 bits

Digital compression ............................. MPEG 2 for DVD,

............................................................... MPEG 1 for VCD

Video output ................................................ 1 Vpp (75 Ω)

CENTRE SPEAKER (FW-D5)

System ................................................ shielded bass reflex

Impedance .................................................................... 6 Ω

Speaker Driver ........................................... 1 x 3” full range

Dimensions (w x h x d) ..................... 230 x 130 x 155 (mm)

Weight ....................................................................... 1.3 kg

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

TROUBLESHOOTING

Warning! Under no circumstances

should you try to repair the set

yourself as this will invalidate the

guarantee. Do not open the set as

there is a risk of electric shock.

No return to start-up screen when disc

is removed.

Maintenance

Cleaning the Cabinet

•

Check to see if the programme requires

another disc to be loaded.

• Use a soft cloth slightly moistened with

a mild detergent solution. Do not use a

solution containing alcohol, spirits,

ammonia or abrasives.

™ Reload a disc.

™ Reset by switching the player off, then

on again.

• If a fault occurs, check the points listed

below before taking the system for

repair.

• Should any problems persist after you

have made these checks, consult your

nearest dealer or service centre.

Player does not respond to all

operating commands during playback.

Cleaning Discs

• When a disc becomes

dirty, clean it with a

cleaning cloth. Wipe

the disc from the

•

Operations are not permitted by the

disc.

™ Refer to the instruction of the disc.

centre out.

• Do not use solvents

such as benzine,

thinner, commercially available cleaners,

or antistatic spray intended for analogue

records.

DVD-Video Player Operation

Distorted picture or no colour with

player menu.

•

The disc format does not match your

TV's video signal (PAL/NTSC).

™ Replace a recommended disc (refer to

the instruction of this manual).

The system setting is not correct.

Cleaning the disc lens

•

• After prolonged use, dirt or dust may

accumulate at the disc lens. To ensure

good playback quality, clean the disc

lens with Philips CD Lens Cleaner or any

commercially available cleaner. Follow

the instructions supplied with cleaner.

™ Make sure the NTSC/PAL setting at the

player matches the video signal of your

television (see NTSC/PAL setting).

•

Check the disc for fingerprints.

™ Clean with a soft cloth, wiping from

centre to edge.

™ Sometimes a small amount of picture

distortion may appear, this is not

malfunction.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

•

Speakers are not connected or are

connected wrongly.

Timer is not working.

Clock is not set.

™ Set the clock.

Timer is not switched on.

CD Player Operation

"NO DISC" is displayed.

Radio Reception

Poor radio reception.

•

™ Check that the speakers are connected

correctly.

™ Make sure the stripped speaker wire is

clamped.

•

The disc is inserted upside down.

™ Place disc with printed side up.

Moisture condensation at the lens.

•

The signal is too weak.

•

™ Adjust the antenna.

™ Connect an external antenna for better

reception.

™ Press TIMER to switch on the timer.

•

Clock setting is erased.

™ Wait until lens has adjusted to normal

Reversed left and right sound.

•

There was a power failure.

room temperature.

There is no disc in the CD tray.

•

The TV or VCR is too closed to the

stereo system.

•

Speakers are connected wrongly.

™ Reset the clock.

•

™ Check the speaker connections and

™ Insert a disc.

™ Separate the stereo system from the TV

or VCR.

System displays features

automatically; buttons flash

continuously.

location.

•

The disc is dirty, badly scratched or

warped.

Lack of bass sound or apparently

imprecise physical location of musical

instruments.

Cannot tune to radio station.

™ Clean or replace the disc.

The disc lens is dirty or dusty.

•

Demonstration mode is switched on.

•

Wrong tuning grid.

•

™ Press and hold Ç (on the system) for

five seconds to switch off the

demonstration.

™ Switch to the correct tuning grid.

™ See section under Maintenance (page

•

Speakers are connected wrongly.

40).

™ Check the speaker connection for

proper phasing, coloured/black wires to

coloured/black terminals.

General

System does not react when any

button is pressed.

"DISC NOT FINALIZED" is

displayed.

There is a howling sound at the

external source.

•

The CD-RW or CD-R disc is not properly

recorded for use with a standard CD

player.

Remote control has no effect on the

system.

•

You hear feedback when you are

listening in AUX mode

•

Electrostatic discharge.

™ Press STANDBY ON to switch the

system off. Remove the AC power plug

from the wall outlet, then reconnect the

power plug and switch on the system

again.

•

Wrong source is selected.

™ Press AUX to select CDR mode.

™ Read the instruction booklet of your CD-

Rewritable or CD-Recorder on how to

finalise a recording.

™ Select the source (CD, TUNER, etc.)

before pressing the function button

(É, í, ë, etc.).

All lighted buttons are not lit.

•

Display is switched on in DIM 3 mode.

™ Press DIM until DIM OFF display mode

•

The CD is badly scratched or dirty.

•

The distance to the system is too large.

™ Reduce the distance.

Batteries are inserted incorrectly.

is shown.

™ Replace or clean CD.

No or poor sound.

•

Volume is not turned up.

™ Adjust VOLUME.

The headphones are connected.

™ Disconnect the headphones.

™ Insert the batteries with their polarities

(+/– signs) as indicated.

Batteries are exhausted.

•

™ Replace the batteries.

3139 115 20054

pg 001-41/D5-D1/21-Eng new

6/8/01, 11:33 AM

Download from Www.Somanuals.com. All Manuals Search And Download.

PC Concepts Printer 500PS User Manual
Pentax Digital Camera ZF ZK ZS User Manual
Philips TV VCR Combo 21PV 288 User Manual
Philips Work Light 278168 User Manual
Philips Work Light T17 E14 User Manual
Planet Technology Network Card WNL U550 User Manual
Polk Audio Speaker MM840DVC User Manual
Promise Technology Network Card C6101SSWP000000 2 User Manual
PVI Industries Water Heater PV 500 6 User Manual
PYLE Audio Flat Panel Television PLVSMN5 User Manual