LFF 6050
GB User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Contents
Note to users in the United States
CE Marking Traceability Information (For
Activating / Deactivating the answering
Printing fax messages stored in the
Performing immediate transmission from
Consulting or modifying the waiting
Printing a document in waiting or in
- I -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Referring to or changing your network
An example of how an AD-HOC network
Installing the drivers using the Companion
Checking the connection between the PC
Saving/Restoring the directory (Smart
Printing in duplex mode with the
Add a contact to the terminal address
Add a group to the terminal address
Radio networks (WLAN)
42
Download from Www.Somanuals.c-omII. -All Manuals Search And Download.
LFF6050
Delete a contact or a group from the
Uninstall the drivers using the Companion
- III -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Security
Security directives
Before turning on your device, check that the outlet that you are going to plug it into conforms to the indications shown
on the information plate (voltage, current, power network frequency) located on your device. This device shall be
connected to a single phase power network. The device shall not be installed on bare ground.
Batteries and rechargeable batteries, packaging and electric and electronic equipment (EEE), shall be thrown away,
as specified by the Instructions of the ENVIRONMENT chapter of this manual.
Because of the device model, the power connector is the only way to disconnecting the device from the power network,
that is why it is imperative to apply the following safety measures: your device shall be connected to a power outlet
located nearby. The outlet shall be easily accessible.
Your device is delivered with a grounded power cord. It is imperative to connect a grounded connector to a grounded
outlet connected to the building earthing.
Repairs-maintenance: Repairs and maintenance should only be carried out by a
qualified technician. No user serviceable parts inside the machine. To reduce the risk
of electrical shock, you shall not proceed with these operations yourself, because by
opening or removing the lids, you could expose yourself to two hazards:
- The laser beam can cause irreversible eye damage.
- Avoid contact with powered parts because it can lead to electrical shock with
unfortunate consequences.
EMC
Note to users in the United States of America
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for help.
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Download from Www.Somanuals.c-om1. -All Manuals Search And Download.
LFF6050
EME Compliance for Canada
This Class "B" digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe "B" est conforme à la norme NMB-003 du Canada.
Laser Safety Information
CAUTION: Use of controls, adjustments, or performance of procedures other than those specified in this guide
may result in hazardous light exposure.
This equipment complies with international safety standards and is classified as a Class 1 Laser Product.
With specific reference to lasers, the equipment complies with laser product performance standards set by
governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light,
as the beam is totally enclosed during all phases of customer operation and maintenance.
For Europe/Asia
This machine complies with IEC 60825-1:1993+A1:1997+A2:2001 standard, is classified as laser class 1 product
and is safe for office/EDP use. It contains one class 3B laser diode, 10.72 mW max, 770-795 nm and other class
1 LEDs (280 µW at 639 nm).
Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions
and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator.
For North America
CDRH Regulations.
This equipment complies with the FDA performance standards for laser products except for deviations pursuant
to Laser Notice No.50, dated 24 June 2007 and contains 1 class 3B laser diode, 10.72 milliwatt, 770-795
nanometer wavelength and other class 1 LEDs (280 µW at 639 nm).
This equipment does not emit hazardous light, since the beam is totally enclosed during all customer modes of
operation and maintenance.
Download from Www.Somanuals.c-om2. -All Manuals Search And Download.
LFF6050
Positions of Safety labels on the machine
The device has warning labels at the positions shown below. For your safety, you must never touch these surfaces
when you remove a paper jam or when you replace the Toner cartridge.
Symbols for the main power switch
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
-
-
means POWER ON.
means POWER OFF.
Download from Www.Somanuals.c-om3. -All Manuals Search And Download.
LFF6050
Regulatory Information
Certifications in Europe
The CE mark applied to this product, symbolizes Sagem Communications
CE
SAS (hereafter designated as Sagem Communications)’s declaration of
conformity with the following applicable European Union Directives, as of
the dates indicated:
December 12,2006: Council Directive 2006/95/EC as amended. Approximation of the laws of the
member states related to low voltage equipment.
December 15, 2004: Council Directive 2004/108/EC as amended. Approximation of the laws of
the member states related to electromagnetic compatibility.
March 9, 1999: Council Directive 99/5/EC, on radio equipment and telecommunications
terminal equipment and the mutual recognition of the conformity.
The conformity declaration is available on
following address:
Sagem Communications - Customer relations department
27, rue Leblanc - 75512 PARIS CEDEX 15 - France
CE Marking Traceability Information (For EU Countries Only)
Manufacturer:
Sagem Communications
Le Ponant de Paris
27 rue Leblanc
75015 PARIS - FRANCE
Download from Www.Somanuals.c-om4. -All Manuals Search And Download.
LFF6050
Environment
The preservation of the environment is of importance to the manufacturer. The manufacturer wishes to service the
installations with respect to the environment and has chosen to integrate the environmental performance in the whole
lifecycle of its products, throughout manufacturing, release, use and disposal.
The packaging
The (green point) logo indicates that a contribution is given to an approved national organization to improve
the packaging salvage and recycling infrastructures.
To make recycling easier, follow local rules and regulations concerning sorting and disposal of such waste.
Batteries and rechargeable batteries
If your product contains batteries or rechargeable batteries, these shall be disposed of at the designated
collecting centers.
The product
The crossed bin symbol on the product indicates that it belongs to the electric and electronic equipment
family.
Therefore, according to European regulations you are requested to dispose of it at the selected collection
areas:
- to distribution centers in case of equivalent equipment purchase,
- to the available local collecting centers (dump, selective collection, etc.).
In doing so, you will participate in the "Waste of Electric and Electronic Equipment reuse and development scheme"
which will help prevent potential effects on the environment and human health.
®
The purpose of the International ENERGY STAR Program is to promote the development
and popularization of energy-efficient office equipment.
®
As an ENERGY STAR Partner, Sagem Communications has determined that this product
®
meets the ENERGY STAR guidelines for energy efficiency.
Your machine will be delivered with the timer for switching to Power Save Mode from the last
copy/print out, set at 5 or 15 minutes, depending on the model. A more detailed description of
this feature can be found in the Machine Setup Section of this guide.
Download from Www.Somanuals.c-om5. -All Manuals Search And Download.
LFF6050
Software use license
CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THE PRESENT LICENSE BEFORE OPENING THE
SEALED ENVELOPE CONTAINING THE SOFTWARE. OPENING THIS ENVELOPE INDICATES THAT YOU
ACCEPT THESE TERMS AND CONDITIONS.
In case you should not accept the terms of this license, the CD-ROM packaging should be returned to the retailer
unopened, along with the other components of the product. The purchase price of this product will be refunded. No
refunds will be made for products if the CD-ROM packaging have been opened, if components are missing or if the
reimbursement request is made after ten (10) days from the purchase date, your receipt is the proof of purchase.
Definition
The Software designates programs and associated documentation.
License
- This license allows you to use this Software on personal computers on a local network. You only have permission to
use this Software to print on one multifunction machine; you can not lend the Software or authorize anyone to use it.
- You are allowed to make a back up copy.
- This license is non-exclusive and non-transferable.
Property
The manufacturer or its providers hold the Software property right. You only become the owner of the CD-ROM. You
shall not modify, adapt, decompile, translate, create any derived piece, rent or sell the Software or the documentation.
Any rights not explicitly approved are reserved by the manufacturer or its providers.
Duration
This license remains valid until cancelled. You can cancel it by destroying the program and the documentation as well
as any other copies of them. This license will automatically be canceled in case you do not respect the terms of this
license. If the license is rendered invalid, you agree to destroy all copies of the program and the associate
documentation.
Warranty
The Software is provided "as is" with no warranties what so ever, whether expressed or implied, including without
limitation, any warranties of merchantability or fitness for a particular purpose; all the risks concerning the results and
performance of this Software are assumed by the buyer. In case the program should appear defective, all the repair
and service expenses will be covered by the buyer.
Nevertheless, the license holder benefits from the following warranty: we guarantee that the CD-ROM on which the
Software is recorded is free from hardware or manufacturing faults if used in normal conditions, the guarantee is valid
for ninety (90) days from the delivery date, the copy of the receipt being the proof of purchase. In case of a CD-ROM
fault that due to accident or misuse, the CD-ROM will not be replaced as per the warranty.
Responsibility
If the CD-ROM is not working properly, send it to the retailer together with a copy of the receipt. It is the retailer's sole
responsibility to replace the CD-ROM. Nobody, not even the manufacturer who is involved in the creation, realization,
merchantability and delivery of this program would be responsible for direct, indirect or immaterial damages, such as,
but not limited to, loss of information, loss of time, execution loss, loss of revenue, loss of customers, due to the use or
inability to use the program.
Development
With a constant concern for improvement, the manufacturer reserves the right to modify the Software specifications
without any notice. In case of modification, your user right does not give you access to free updates.
Download from Www.Somanuals.c-om6. -All Manuals Search And Download.
LFF6050
Applicable law
This license is under the French law. Any dispute following the interpretation or execution of this license will be
submitted to the Paris Court.
Given the continuous technology development, the manufacturer reserves the right to modify the technical
specifications indicated for this product, at any time, without prior notice, and/or to stop manufacturing of the product.
All the names of the products and brands that could be trademarks registered by their respective owners are
recognized in the present document.
Registered trademarks
Given the technical evolution, Sagem Communications reserves the right to modify the technical specifications of this
product and/or to stop its manufacturing at any time and without notice. Companion Suite Pro is a registered trademark
of Sagem Communications.
Adobe® and the Adobe® products referred to here are registered trademarks of Adobe Systems Incorporated.
PaperPort11SE is a registered trademark of ScanSoft.
Microsoft® Windows 2000®, Microsoft® Windows Server 2003®, Microsoft® Windows XP®, Microsoft® Windows
Vista® and any other Microsoft® product referred to here are registered trademarks of Microsoft Corporation registered
and/or used in the United States and/or in other countries.
All the other brands or products referred to as examples or in order to give additional information are registered
trademarks of their respective owners.
The informations contents of this user manual are subject to change without notice.
Prohibited reproductions
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
- bank notes;
- checks;
- bonds;
- stock certificates;
- bank drafts;
- passports;
- driver's licenses.
The preceding list is meant as a guide only and is not inclusive. If you have any questions concerning the legality of
copying or printing certain items, consult with your legal advisor.
Download from Www.Somanuals.c-om7. -All Manuals Search And Download.
LFF6050
Installation
Location conditions
By choosing an appropriate location, you preserve the longevity of the machine. Check that the selected location has
the following characteristics:
- Choose a well ventilated location.
- Make sure not to obstruct the ventilation grids located on the left and right sides of the device. During the
installation, make sure to place the machine thirty centimeters away from the surrounding objects so all the lids
can be easily opened.
- Make sure that this location does not present any ammonia nor any other organic gasses emission hazard.
- The ground outlet (refer to the security notices presented in the Security chapter) to which you plan to connect
the machine must be located close to this one and have an easy access.
- Make sure that the machine is not directly exposed to sun light.
- Make sure not to place the machine in an area exposed to an air flow generated by an air conditioning, heating or
ventilation system, nor in an area subject to large temperature or humidity variations.
- Choose a solid and horizontal surface on which the machine will not be exposed to intense vibrations.
- Keep the machine away from any object that could obstruct its ventilation ports.
- Do not place the machine close to hangings or any other flammable objects.
- Choose a location where splashes of the water and other liquids are limited.
- Make sure that this location is dry, clean and dust free.
Cautions of use
Take into account the important precautions below when using the machine.
Running environment:
- Temperature: 10 °C to 27 °C [50 °F to 80.6 °F] with an ambient humidity included between 15 to 80% (up to 32°C
[89.6 °F] with an ambient humidity included between 15 to 54%).
Terminal:
The section below describes the precautions to be taken when using the machine:
- Never turn the machine off and never open the lids while printing.
- Never use gas or flammable liquids, or objects generating magnetic field close to the machine.
- When you unplug the power cord, always hold the connector without pulling the cord. A damaged cord presents
a potential fire hazard or an electric shock hazard.
- Never touch the power cord with wet hands. You risk getting an electric shock.
- Always unplug the power cord before moving the machine. Otherwise, you could risk having the cord damaged
and create a fire hazard or an electric shock hazard.
- Always unplug the power cord when you plan not to use the machine for a long period of time.
- Never put objects on the power cord, never pull it and never fold it. This could cause a fire hazard or an electric
shock hazard.
- Always make sure that the machine is not sitting on the power cord or any other electric device communication
cables. Make sure also that neither cord nor cable is introduced to the machine inner mechanism. This would
expose you to a machine malfunction risk or to a fire hazard.
- Make sure that the printer is unplugged from the power outlet before connecting or disconnecting an interface
cable to the printer (use a shielded interface cable).
- Never try to remove any fixed pane or hood. The machine contains high voltage circuits. Any contact with these
circuits can cause an electric shock risk.
- Never try to modify the machine. This could cause a fire hazard or an electric shock hazard.
- Always make sure that paper clips, staples or other small metallic items do not get inside the machine via the
ventilation ports or other ports. Such items create fire hazards or electric shock hazards.
- Prevent water and any other liquid from spilling on the machine or near to it. Any contact of the machine with water
or liquid can cause a fire hazard or an electric shock hazard.
Download from Www.Somanuals.c-om8. -All Manuals Search And Download.
LFF6050
- If liquid or metallic item gets accidentally inside the machine, turn it off immediately, unplug the power cord and
contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.
- In case of heat, smoke, unusual smell or abnormal noise emissions, turn the machine off, unplug the power cord
immediately and contact your retailer. Otherwise, you will face a fire hazard or an electric shock hazard.
- Avoid using the machine during an "electric storm", this can cause an electric shock hazard due to lightning.
- Never move the terminal during printing.
- Always lift the terminal when you wish to move it.
Make sure to place the machine in well ventilated premises. When in operation, the printer generates
a small amount of ozone. An unpleasant smell can come from the printer if it is used intensively in
poorly ventilated premises. For a secure use, make sure you place the machine in well ventilated
premises.
Safety information
When using your product, the following safety precautions should always be followed.
Safety During Operation
In this information slip, the following symbols are used:
Indicates a potentially hazardous situation which, if instructions are not followed, could
WARNING:
CAUTION:
result in death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed, may result in
minor or moderate injury or damage to property.
WARNING
- Connect the power cord directly into a wall outlet and never use an extension cord.
- Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or
otherwise damaged.
- To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than
those specified in the Operating instructions.
- Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following
conditions exists:
•
•
•
You spill something into the product.
You suspect that your product needs service or repair.
Your product’s cover has been damaged.
- Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame.
- Disposal can take place at our authorised dealer or at appropriate collection sites.
- Dispose of the used toner cartridge (or bottle) in accordance with the local regulation.
CAUTION
- Protect the product from dampness or wet weather, such as rain, snow, and so on.
- Unplug the power cord from the wall outlet before you move the product. While moving the product, you should
take care that the power cord will not be damaged under the product.
- When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
- Do not allow paper clips, staples, or other small metallic objects to fall inside the product.
- Keep toner (used or unused), toner cartridge (or bottle), ink (used or unused) or ink cartridge out of reach of
children.
Download from Www.Somanuals.c-om9. -All Manuals Search And Download.
LFF6050
- Be careful not to cut yourself on any sharp edges when you reach inside the product to remove misfed sheets of
paper or masters.
- For environmental reasons, do not dispose of the product or expended supply wastes at household waste
collection point. Disposal can take place at our authorised dealer or at appropriate collection sites.
- Our products are engineered to meet the high standards of quality and functionality, and we recommend that you
only use the expendable supplies available at an authorised dealer.
Power Supply
The socket-outlet shall be installed near the product and shall be easily accessible.
For Fax or Telephone
- Do not use this product near water, for example near bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
- Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of an
electric shock from lightning.
- Do not use a telephone in the vicinity of a gas leak to report the leak.
Paper recommendations
Loading paper in the main unit tray
•
Insert paper with the face down, and adjust paper guides to the paper format to avoid feed failure, skewing, and
paper jams.
•
Amount of loaded paper must not exceed the loading mark. If the loading mark is exceeded, this may cause feed
failure, skewing, and paper jams.
•
•
•
Adding paper in the pile must be avoided because it may cause double feeding.
When withdrawing the cassette from the main unit, always support it with both hands to avoid dropping it.
If you use paper already printed by your machine or another printer, the printing quality may not be optimal.
Handling of paper
•
•
•
Curling must be corrected before printing.
Curls must not exceed 10 mm.
Care must be taken with storage to prevent feed faults and image defects due to leaving the paper in conditions of
high humidity.
Humidity control
•
•
•
Paper which has become damp, or paper which has been left unused for a very long time, must not be used.
After opening the paper, it must be kept in a plastic bag.
Paper with waved ends, paper which is creased, paper with crumples, and any other non-normal paper must not
be used.
Handling the unit
Operator shocks
During printing, shocks must not be applied to the paper feed cassette, tray, cover, and other parts of the machine.
Moving the unit
When moving the unit on a desk, it must be lifted, and not dragged.
Handling the Toner Cartridge
•
•
Must not be stood on the side, or held upside down.
Must not be shaken strongly.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Rules for use symbols
WARNING
Indicates important safety notes.
Ignoring these notes could result in serious injury or death. Be sure to read these notes. They can be found in the Safety
information section of this manual.
CAUTION
Indicates important safety notes.
Ignoring these notes could result in moderate or minor injury, or damage to the machine or to property. Be sure to read
Important
Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds,
damage to originals, or loss of data. Be sure to read these explanations.
Note
Indicates supplementary explanations of the machine’s functions, and instructions on resolving user errors.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Terminal description
Front and Back sides
1. Control panel
10. Master USB connection (USB key)
2. Document feeder
11. Manual paper feed setup guides
12. Manual input tray
3. Paper jam cover
4. Power supply cord connection
5. On/Off switch
13. Paper tray
14. Cartridge access cover
15. Fold-down stopper for paper delivery
16. Paper output
6. LINE socket - telephone cable connection
7. EXT. socket - connection for external telephone devices
8. Slave USB connection (for PC)
9. Master USB connection (USB key)
17. Smart card insertion point
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Command panel
1. Screen.
16. Key
: Validation.
2. Digital keypad.
3. Alphabetical keypad.
17. Key OK: confirms the displayed selection.
18. Key
19. Key
20. Key
ꢀ
: menu access and navigation down the menus.
4. Key
5. Key
Í
: deletes the character to the left of the cursor.
: input or line feed.
C
: back to the previous menu and input correction.
ꢁ
: navigation up the menus.
: stops the current operation.
6. Key
7. Key
8. Key
: access to special characters.
21. Key
:
Shift.
22. Key
: sets up the activation delay and toner save in
copy mode.
23. Key : access to print menu (print functions list,
machine settings, etc.).
24. Key : analysis resolution setup.
: document analysis to the PC or a media
(USB key).
9. Key
: local copy.
10. Key
11. Key
12. Key
13. Key
14. Key
: stops the current PC print job.
: sending of an SMS (Short Message Service).
: sending of a fax.
25. Key
: contrast setup.
26. Icon
27. Icon
28. Icon
29. Icon
: resolution "Copy: Quality Text / Fax: SFine".
: resolution "Photo".
: resolution "Copy: Text / Fax: Fine".
: colour mode.
: access to directory and quick dial numbers.
:
line manual connection, listen for tone during
30. Icon
31. Icon
32. Icon
: activity on the telephone line.
: Fax mode.
fax sending.
15. Key : multiple contact sending (fax, e-mail or SMS).
: external answering machine mode.
Accessing terminal menus
All terminal functions and settings are available via the menu and are associated to a specific menu command.
For example, the menu command 51 launches the printing of the functions list (the functions list stores the list of all
terminal menus, sub-menus and their identification number).
Two methods are available to access menu items: the step by step method or the shortcut method.
To print the functions list with the Step by step method:
1 Press ꢀ.
2 Use the ꢀor ꢁbutton to browse the menu and select 5 - PRINT. Confirm with OK.
3 Use the ꢀor ꢁbutton to browse the menu PRINT and select 51-FUNCTIONS LIST. Confirm with OK.
To print the functions list with the shortcut method:
1 Press ꢀ.
2 Enter 51 with the numerical keypad to directly print the functions list.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Packaging contents
Device installation
The packaging contains the items listed below:
1 Unpack the device.
2 Install the device respecting the security notices
Multifunction device
stated at the beginning of this booklet.
3 Remove all stickers from the machine.
4 Remove the plastic protection film from the screen.
Installing the document feeder
1 Secure the document feeder by fitting the two clips
(B) in the notches (A) provided for this purpose.
1 toner cartridge
Feed cassette paper insertion
Before inserting paper, refer to the
1 Installation guide
Important
Your device accepts a number of formats and types of
1 PC installation CD ROM and 1 OCR PC software CD
ROM (depending on model)
You can use paper weighing
Important
between 60 and 105 g/m2.
1 Remove the paper feed cassette completely.
1 power cord
1 telephone cord
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
2 Push the lower panel down until it clicks.
Cartridge installation
1 Stand in front of the machine.
2 Push the left and right sides of the cover and pull it
towards you at the same time.
3 Setup the back side feed cassette stop by pushing
the "PUSH" lever (A).
Then adjust the lateral paper guides to the paper
format by pushing lever (B) located on the left
guide. Adjust the length paper guide to the paper
format by pushing lever (C).
3 Unpack the new cartridge. Gently roll the cartridge
5 or 6 times to distribute the toner evenly inside the
cartridge. Thoroughly rolling the cartridge will
assure the maximum copies per cartridge.
Hold it by its handle.
4 Insert the cartridge in its slot by pushing it until it
clicks (last move down) as shown on the picture
below.
4 Take a paper stack, pull the paper off and align it
on a flat surface.
5 Put the paper stack in the feed cassette
(200 sheets of 80 g/m² paper for instance).
6 Put the feed cassette back in its location.
5 Close the cover.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Paper delivery stop
Adjust the paper delivery stop, depending on the format of
the document to be printed. Do not forget to raise the flap
to prevent the sheets from falling down.
The power cord is used as a power
unit cut off. As a precaution, the
outlet shall be located close to the
device and be of easy access in
case of danger.
WARNING
4 Press the On/Off button to turn on the device
(I position).
Starting your device
Device initial setup
Device connection
After a few seconds, when the machine has warmed up,
the Easy Install function is launched and the LCD screen
displays the following message:
Before plugging the power cord, it
is imperative to refer to the
WARNING
1 - FRANCAIS
2 - ENGLISH
1 Plug the end of the telephone line into the terminal
socket and the other end into the wall telephone
socket.
The Easy Install function will help you configure your
machine by guiding you through the basic settings.
If you wish to modify the setting displayed, press the OK
button. If you do not want to modify the displayed setting,
press the C button: the Easy Install function then
displays the next basic setting.
If you do not want to carry out the
initial setup, press the
button. A
confirmation message appears. Press
Note
the button again to confirm.
To manually modify and customise the
machine settings, refer to
1 Select the desired language using the ꢁor ꢀ
2 Make sure that the On/Off switch is on Off
buttons and confirm with OK.
(O position).
2 To set the country, press the OK button.
3 Connect the power cord to the device.
SET COUNTRY
YES=OK - NO=C
Plug the power cord to outlet on the wall.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Select your country in the list displayed using the ꢁ
or ꢀbuttons and confirm with OK.
11 Enter the minimal size of the company’s outside
numbers (1 to 30) using the numerical keypad.
This setting is used to differentiate internal
telephone numbers from external telephone
numbers.
If none of the options in the list is
suitable, select the "OTHER" option.
Note
For example, if you are installing the machine in
France, behind your company’s PABX, enter 10
(10 digits being the standard telephone number
length for France).
Use C to correct an entry.
Press the OK button to confirm.
4 If you have set the country to "Other", you may
need to set the public telephone NETWORK to use.
Press the OK button to specify it.
SET NETWORK
YES=OK - NO=C
12 Enter the local prefix number (10 characters max.)
using the numerical keypad.
Select the telephone network to use in the list
displayed using the ꢁor ꢀbuttons and confirm
with OK.
This prefix will automatically be added when an
external number is dialled.
To insert a pause for dial tone ("/" sign), press
simultaneously the CTRL and M keys, or long press
the 0 (zero) key on the numerical keypad until the
"/" sign is displayed.
Use the C button to correct an entry.
Press the OK button to confirm.
If none of the options in the list is
suitable, select the "OTHER X"
option:
•
•
•
•
•
•
OTHER 1 = TRB21
OTHER 2 = US
Important
OTHER 3 = Russia
OTHER 4 = Jordan
OTHER 5 = Israel
OTHER 6 = TRB21
The setup is now complete and the functions list is
automatically printed out.
The LCD screen displays the message PAPER EMPTY if no
paper has been loaded in the paper tray (see Loading
been loaded, printing will resume.
5 To set the date and time, press the OK button.
DATE/TIME
YES=OK - NO=C
Paper insertion in the manual input
tray
6 Enter the numbers of the required date and time
one after another using the numerical keypad.
The date format depends on the country you have
selected: for instance, DDMMYY for France,
MMDDYY for the USA.
Before inserting paper, refer to the
Important
Use the C button to correct an entry.
Press OK to confirm.
The manual input tray allows you to use various paper
formats with greater grammage than the one used in the
paper feed cassette (refer to the paragraph
7 To specify the fax number and machine name,
press the OK button.
This information will appear on your transmitted
documents when the "Sending Header" function is
activated.
Only one sheet or envelope can be fed at a time.
NAME/NUMBER
YES=OK - NO=C
You can use paper weighing
Important
between 52 and 160 g/m².
8 Enter your fax number (20 digits max.) using the
numerical keypad.
1 Spread the manual feed guides to the maximum.
To type the "+" sign, press simultaneously the CTRL
and Q keys.
Use the C button to correct an entry.
Press the OK button to confirm.
9 Enter your machine name (20 characters max.)
using the alphanumerical keypad.
Press the OK button to confirm.
10 If you are connecting your machine to a private
network, behind a company’s PABX, you may need
to specify a local prefix. This prefix will be then
used to exit the company’s telephone network.
To set up this function, press the OK button.
2 Insert a sheet or an envelope in the manual input
PREFIX
tray.
YES=OK - NO=C
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Adjust the paper guides against the right and left
edges of the sheet or the envelope.
4 Print making sure that the chosen paper format
corresponds to the selected format on the printer
Use of envelopes
•
•
Feeding can be done only through the manual feed.
Recommended area should be the area which
excludes 15 mm from the leading edge, 10 mm from
both the left and right edges, and the rear edge.
•
•
A few lines may be given in solid print at the part of
being overlapped.
Envelopes which are not recommended may lead to
improper printing (refer to the paragraph
•
•
Curled envelope after printing should be fixed
manually.
Small crumples on the edge of the wide side of
envelopes, smearing, or less clear printing may
appear on the reverse side.
•
•
•
Set envelope by pressing the folding line of four edges
properly after releasing air inside.
Set envelope in a proper position after aligning in case
it is bent or warped.
Paper conditioning is not allowed. And it should be
used under normal office environment.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Enter the number of copies that you want and
confirm with the OK button.
Copy
4 Choose the paper tray AUTOMATIC or MANUAL
with the buttons ꢁor ꢀ, then confirm with the OK
button.
Your machine has the function to make one or more
copies.
5 Choose with the buttons ꢁor ꢀthe printing option
(see examples below) depending on the copy
mode that you want:
You can also set up several parameters in order to make
copies at your will.
- Mosaic mode (document feeder): 1 Page onto 1,
2 Pages onto 1, or 4 Pages onto 1.
Simple copy
In this case, the default parameters are applied.
1 Place the document to be copied in the automatic
document feeder, printed face on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
2 Press the
button twice. The copy is made
using the default parameters.
ECO mode copy
The ECO mode enables you to reduce the amount of
toner consumed on the page so as to save your printing
costs.
When the ECO mode is used, the toner consumption is
reduced and the print density becomes lighter.
1 Place the document to be copied in the automatic
document feeder, printed face on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
2 Press the
button.
button.
- Poster mode (flat-bed scanner): 1 Page to 1,
1 Page to 4 or 1 page to 9.
3 Press the
Advanced copying
The sophisticated copy allows to do custom setups for the
current copy.
You can start copy by pressing the
Note
button at any time in below
steps.
1 Place the document to be copied in the automatic
document feeder, face printed on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
After step 1, you can directly enter the
number of copies with the numerical
keypad and press the OK button to
Note
validate. Then refer to step 4.
Confirm with the OK button.
2 Press the
button.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
6 Adjust the desired zoom level, from 25% TO 400%
with the buttons ꢁ or ꢀ, confirm with the OK
button (only available in 1 Page to 1 copy mode).
7 Adjust the contrast level with the buttons ꢁ or ꢀ,
then confirm with the OK button.
8 Adjust the desired brightness level with the buttons
7 Adjust the desired origin values with the digital
keyboard buttons ꢁor ꢀthen confirm with the OK
button.
ꢁor ꢀ, then confirm with the OK button.
9 Choose the paper type NORMAL, THICK with the
buttons ꢁor ꢀ, then confirm with the OK button.
The LCD screen displays the following message:
8 Choose the resolution depending on the printing
quality that you want AUTO, TEXT, QUALITY
TEXT or PHOTO with the buttons ꢁ or ꢀ, then
confirm with the OK button.
PUT ID CARD
THEN OK
9 Adjust the contrast level with the buttons ꢁ or ꢀ,
10 Place your identity card or any other official
document against the glass of the flatbed scanner,
as shown below:
then confirm with the OK button.
10 Adjust the desired brightness level with the buttons
ꢁor ꢀ, then confirm with the OK button.
11 Choose the paper type NORMAL, THICK with the
buttons ꢁor ꢀ, then confirm with the OK button.
ID Card Copy mode
The ID CARD copy function is used for copying both sides
of an identity card or driver’s license type document on an
A4 format sheet (original document size < A5) or on a
Letter format sheet (original document size < Statement).
11 Press the OK button.
The document is scanned then the LCD screen
displays the following message:
The LCD screen displays useful operating instructions
(when the original document should be placed, when the
document should be turned over, etc.) and asks for your
confirmation to proceed with the operation.
TURN UP DOC
THEN OK
This function is available only if the
document to be copied is placed on
the flatbed scanner, and if no paper
is detected in the automatic
document feeder.
12 Turn your document over then confirm with the
OK button.
The machine prints out a copy of your document.
Important
Zoom and Origin adjustments are
not available in this copy mode.
Special setup for the copying
Setups done through this menu become the device
1 Make sure that there is no document in the default setups after you confirm.
automatic document feeder.
When the quality of the printing is
not satisfying, you can proceed to a
calibration (see Calibrate your
2 Press the
button.
Important
3 Enter the desired number of copies and confirm
with the OK button.
4 Choose the paper tray AUTOMATIC or MANUAL
with the buttons ꢁor ꢀ, then confirm with the OK
button.
Resolution setup
The RESOLUTION parameter allows you to setup the
photocopy resolution.
Copying in ID Card mode is only
possible on A4 (original document
size < A5) or Letter (original
ꢀ841 - ADVANCED FCT/COPY/RESOLUTION
document size < Statement) paper
size. Make sure that the selected
paper tray uses the correct paper
size.
Important
1 Press ꢀ, enter 841 using the keypad.
2 Choose the resolution with the buttons ꢁ or ꢀ
according to the following table:
5 Choose the copying option ID CARD with the
Parameter
Signification
Low resolution.
Icon
buttons ꢁor ꢀand confirm with the OK button.
6 Choose the resolution depending on the desired
printing quality AUTO, TEXT, QUALITY TEXT or
PHOTO with the buttons ꢁor ꢀ, then confirm with
the OK button. For optimal results with ID
documents, select the PHOTO resolution.
AUTO
none
Standard resolution for
documents containing text and
graphics.
TEXT
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Analysis origin setup
Parameter
Signification
Icon
If you want, you can change the origin of the scanner.
QUALITY Optimal resolution for
TEXT
documents containing text.
By entering new values for X and Y in mm (X < 209 and
Y < 280), you move the analysed area as shown on the
diagram below.
Optimal resolution for
documents containing
photographies.
PHOTO
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the button.
You can also change the resolution by
pressing the button.
Note
ꢀ844 - ADVANCED FCT/COPY/ORIGIN
1 Press ꢀ, enter 844 using the keypad.
Zoom setup
2 Select the X and Y coordinates with the buttons ꢁ
The ZOOM parameter allows you to reduce or enlarge an
area of a document by choosing the origin and the zoom
level to apply to the document, from 25 to 400 %.
or ꢀ.
3 Setup the desired coordinates with the numerical
keypad or the buttons ꢁand ꢀ.
ꢀ842 - ADVANCED FCT/COPY/ZOOMING
4 Confirm your choice by pressing the OK button.
5 Quit this menu by pressing the
button.
1 Press ꢀ, enter 842 using the keypad.
2 Enter the desired zoom level with the
alphanumerical keypad or choose among
predefined values with the buttons ꢁand ꢀ.
Contrast setup
The CONTRAST parameter allows to choose the
photocopy contrast.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
button.
ꢀ845 - ADVANCED FCT/COPY/CONTRAST
Collated copy setup
1 Press ꢀ, enter 845 using the keypad.
2 Setup the desired level of contrast with the buttons
The COLLATED parameter allows you to assemble or
disassemble your copies.
ꢁand ꢀ.
3 Confirm your choice by pressing the OK button.
ꢀ843 - ADVANCED FCT/COPY/COLLATED
4 Quit this menu by pressing the
button.
1 Press ꢀ, enter 843 using the keypad.
2 Select the desired option with the buttons ꢁand ꢀ
Brightness setup
according to the following table:
The BRIGHTNESS parameter allows to lighten or darken
your output.
Parameter
Signification
ꢀ846 - ADVANCED FCT/COPY/BRIGHTNESS
The printer assembles the copies of
the original document.
1 Press ꢀ, enter 846 using the keypad.
2 Setup the desired brightness with the buttons ꢁ
E.g.: if you make three copies of a
10-page document, the document is
copied from page 1 to 10 three times
over.
COLLATED
and ꢀ.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
button.
The printer does not assemble the
copies of the original document.
Paper type setup
E.g.: if you make three copies of a
10-page document, page 1 is copied
three times, then page 2, then page
3, etc.
UNCOLLATED
ꢀ851 - ADVANCED FCT/SCAN. & PRINT/PAPER
TYPE
1 Press ꢀ, enter 851 using the keypad.
2 Select the paper NORMAL or THICK that you use
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the button.
with the buttons ꢁand ꢀ.
3 Confirm your choice by pressing the OK button.
4 Quit this menu by pressing the
button.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Paper tray selection
Left and right printing margins setup
The Automatic selection can have two meanings If you want to, you can offset the lateral margins of the
depending on the paper format defined on the paper document to the left or right during printing.
trays. The following table describes the different cases.
ꢀ855 - ADVANCED FCT/SCAN. & PRINT/
PRINTER MARG
Default tray
Tray used for copy
1 Press ꢀ, enter 855 using the keypad.
Selection between the
AUTOMATIC main tray and the
2 Setup the left / right margins offsets (by 0.5 mm
Same paper
format in the
trays
steps) with the buttons ꢁand ꢀ.
manual tray.
3 Confirm by pressing the OK button.
The manual tray is
used.
4 Quit this menu by pressing the
button.
MANUAL
AUTOMATIC The main tray is used.
Different
paper format
in the trays
Top and bottom printing margins setup
The manual tray is
If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.
MANUAL
used.
ꢀ856 - ADVANCED FCT/SCAN. & PRINT/TOP
ꢀ852 - ADVANCED FCT/SCAN. & PRINT/TRAY
PRINT.
PAPER
1 Press ꢀ, enter 856 using the keypad.
1 Press ꢀ, enter 852 using the keypad.
2 Setup the top / bottom margins offsets (by 0.5 mm
2 Select the default paper tray to use, AUTOMATIC
steps) with the buttons ꢁand ꢀ.
or MANUAL, with the buttons ꢁand ꢀ.
3 Confirm by pressing the OK button.
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the
button.
4 Quit this menu by pressing the
button.
Format paper setup
Sheet-feed analysis margins setup
This menu allows you to define the default paper format
of the manual tray and the main tray. You can also setup
the default scanning width.
If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
sheet-feed scanner.
ꢀ857 - ADVANCED FCT/SCAN. & PRINT/
ꢀ853 - ADVANCED FCT/SCAN. & PRINT/ S.F.
PAPER FORMAT
MARGINS
1 Press ꢀ, enter 857 using the keypad.
1 Press ꢀ, enter 853 using the keypad.
2 Select the paper tray for which you want to define
2 Setup the left / right margins offsets (by 0.5 mm
a default paper format with the buttons ꢁand ꢀ.
steps) with the buttons ꢁand ꢀ.
3 Confirm by pressing the OK button.
3 Confirm by pressing the OK button.
4 Choose the paper format with the buttons ꢁ or ꢀ
according to the following table:
4 Quit this menu by pressing the
button.
Paper tray
Available paper format
Flat-bed analysis margins setup
MAN. TRAY A5, Statement, A4, Legal and Letter
If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
flat-bed scanner.
AUTO. TRAY A5, Statement, A4, Legal and Letter
SCANNER
LTR/LGL and A4
ꢀ854 - ADVANCED FCT/SCAN. & PRINT/
5 Confirm by pressing the OK button.
FLATBED MARG
6 Quit this menu by pressing the
button.
1 Press ꢀ, enter 854 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons ꢁand ꢀ.
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the
button.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Immediate transmission
Fax
1 Place the document to be copied in the automatic
document feeder, face printed on the top.
or
This chapter describes all the fax processing and
configuration functions.
Place the document to be copied face down on the
glass, respecting the indications around the glass.
You will also find a section describing fax mailboxes.
Fax transmission
2 Enter the fax number then press
or
.
3 If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select NEXT and confirm with OK. Select
DONE when all pages have been scanned.
Print a header page
A header page is stored in your terminal. To send your fax
using this header page, you can print it at any time and fill
in your details.
The
icon flashes during the call phase, it stays lit
when both faxes are in communication.
1 Select ꢀ30 - FAX /HEADER PAGE.
At the end of transmission the initial screen is displayed.
2 Select:
301 - LOCAL, to print a header page according to
the language configured on the terminal,
302 - INTERNAT, to print a bilingual header page,
the language of the country configured on the
terminal and English. The separator between the
two languages is "/".
You can modify transmission options
when sending a fax. To do so, press
OK after entering the fax number.
Note
Delayed transmission
If English is the language configured
on the terminal, the header page will
only be printed in English.
This function allows you to transmit a document at a later
time.
Note
To program a postponed transmission you need to
identify the subscriber number, transmission time, feeder
type and number of pages.
Example of the international header page:
To delay the transmission time of your document :
1 Place the document to be copied in the automatic
document feeder, face printed on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
Make sure that the document in the
feeder tray or on the scanner window
is properly located in order to avoid
Important
sending blank or incorrect pages.
2 Select ꢀ31 - FAX / TRANSMISSION.
3 Enter the subscriber number you wish to program
at a different time or choose your dialling mode and
confirm with OK.
4 Next to the current time, enter the new time and
confirm with OK.
5 Adjust the contrast and confirm with OK.
6 Select the feed type, FEEDER or MEMORY and
confirm with OK.
7 You may enter the number of pages before
transmission and confirm with OK.
8 Confirm postponed transmission by pressing
.
9 If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select NEXT and confirm with OK. Select
DONE when all pages have been scanned.
Your document is stored and will be sent at the new time.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Default tray set to Manual:
Transmission with auto redial
This function allows you to monitor the dialling operation
during a fax transmission. In this case, the maximum
transmission rate will be 14400 bps.
Manual tray
paper format
Main tray
paper format
Action
A4,Letter and A4,Letter
Legal and Legal
The fax is printed on
manual tray.
This function allows for example:
•
to hear if the subscriber’s fax is engaged and if so,
choose the moment when the line is clear to start the
document transmission.
A4,Letter and A5,
The fax is printed on
manual tray.
Legal
Statement
The paper on manual
tray is incompatible.
•
to control the communication progress in case of
uncertain numbers, etc.
A5,
Statement
A4,Letter
and Legal
The fax is printed on the
main tray.
To take the line manually:
1 Place the document in the fax feeder.
An error message is
displayed on the screen.
2 Press
.
A5,
A5,
Statement
Statement
3 If necessary, set the sound level using the ꢀor ꢁ
The paper on manual
tray is incompatible.
keys.
4 Enter the subscriber number.
As soon as you hear the remote fax tone, the line is
clear and you can start the transmission.
Default tray set to Automatic:
Manual tray
paper format
Main tray
paper format
5 Press
to start the document transmission.
Action
If your machine is set in order to print a transmission
report, the reduced copy of the document first page will
not be printed and it notifies you that the communication
The fax is printed with
an automatic selection
of tray.
A4,Letter and A4,Letter
Legal and Legal
An error message is
displayed on the screen.
A4,Letter and A5,
Fax reception
Legal
Statement
The paper on automatic
tray is incompatible.
Fax reception depends on the parameter settings of your
machine.
A5,
Statement
A4,Letter
and Legal
The fax is printed on the
main tray.
The following parameters let you customize the printing of
received faxes:
An error message is
displayed on the screen.
A5,
A5,
Statement
Statement
The paper on automatic
tray is incompatible.
Relay broadcast
Your fax machine (initiator) can relay a document, in other
words, transmit a document to your subscribers via a
remote fax and with a precise relay list.
The printing is not possible on A5
Important
(or Statement) paper format.
To do this the initiator fax and the remote fax must both
have the relay function.
The following tables give which tray is used to print
received fax depending on the default tray and the paper
format in both trays.
To relay you need to supply the remote fax with the
document and the relay list number. The remote fax will
then transmit this document to all subscribers on the list.
Once the relay is activated by your fax and as soon as the
document is received by the remote fax, the document is
printed before relaying to all subscribers on the list.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
To activate relay from your fax machine:
Activating / Deactivating the answering
machine
1 Insert the document to relay.
ꢀ382 - FAX / FAX ANSW. / ACTIVATION
Make sure that the document in the
feeder tray or on the scanner window
is properly located in order to avoid
sending blank or incorrect pages.
1 Press ꢀ, enter 382 using the keypad.
Important
2 If you saved an access code for your fax answering
machine, enter it and confirm with OK.
2 Select ꢀ37 - FAX / BROADCAST.
3 Select the required answering machine option, ON
or OFF, and confirm you choice with OK.
3 Enter the remote fax number where you will relay to
or choose your dialling mode and press OK.
4 Quit this menu by pressing the
button.
4 Enter the relay list number used by the remote fax
and press OK.
Printing fax messages stored in the memory
5 You may enter the time you wish to transmit the
document next to the current time and press OK.
The printing is not possible on A5
Important
6 If you wish to modify the document feed type,
select one of the options FEEDER or MEMORY,
then press OK.
(or Statement) paper format.
ꢀ381 - FAX / FAX ANSW. / PRINT
7 If you wish, you may enter the number of pages of
your documents before transmitting.
1 Press ꢀ, enter 381 using the keypad.
2 If you saved an access code for your fax answering
8 Activate relay by pressing
.
machine, enter it and confirm with OK.
9 If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select NEXT and confirm with OK. Select
DONE when all pages have been scanned.
Documents received and stored in the memory are
printed.
Fax rerouting
The document in the feeder will be relayed either
immediately or at a later time (according to your choice)
to the remote fax which will relay the document.
This function is used to reroute faxes received to a
directory contact. To use this function, you have to
perform two operations:
Fax answering machine
1 Activate rerouting.
The Fax answering machine allows you to keep
confidential documents in storage and to avoid printing
them as you receive them.
2 Set the rerouting address of the fax.
Activating rerouting
The
indicator light lets you know the state of your
Make sure that the subscriber exists
Fax answering machine:
Important
page 39).
•
•
Light on: the answering machine is on.
Blinking: your fax has documents in storage or is in the
process of receiving faxes.
ꢀ391 - FAX / REROUTING / ACTIVATION
•
Light off: memory full, the terminal cannot receive any
more documents.
1 Press ꢀ, enter 391 using the keypad.
2 Using the keys ꢀand ꢁwithin the navigator,
select option ON.
You can assure document confidentiality by using the 4
digit access code. Once saved, you will require this
access code for:
3 Using the keys ꢀand ꢁwithin the navigator,
select the subscriber from the directory.
4 Confirm with OK.
5 Quit this menu by pressing the
button.
•
•
printing fax messages in memory,
activating or deactivating the fax answering machine.
If the option OFF is selected, the menus 392 and 393 will
not be included in the functions overview, when it is
printed out.
Saving an access code
ꢀ383 - FAX / FAX ANSW. / ANSWER CODE
1 Press ꢀ, enter 383 using the keypad.
2 Enter the code (4 digits) and confirm with OK.
3 Quit this menu by pressing the
button.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Setting the re-direction contact
Printing rerouted documents
ꢀ392 - FAX / REROUTING / CALL NUMBER
The printing is not possible on A5
(or Statement) paper format.
Important
Important
1 Press ꢀ, enter 392 using the keypad.
2 Using the keys ꢀand ꢁwithin the navigator,
This menu is only accessible when
the function FAX ARCHIVING is
activated.
select the subscriber from the directory.
3 Confirm with OK.
4 Quit this menu by pressing the
button.
ꢀ052 - MEDIA / FAX ARCHIVING / PRINT
Printing rerouted documents
1 Press ꢀ, enter 052 using the keypad.
ꢀ393 - FAX / REROUTING / COPY
2 Using the keys ꢀand ꢁ, select the option ON to
print all rerouted documents automatically.
1 Press ꢀ, enter 393 using the keypad.
3 Confirm your choice with OK.
2 Using the keys ꢀand ꢁwithin the navigator,
select the COPY option (local printout of the
information relayed to your device) either ON
or OFF.
4 Quit this menu by pressing the
button.
Transmission waiting queue
3 Confirm with OK.
This function lets you obtain a recap of all documents
queuing, for transmission, including those in deposit or in
delayed transmission, etc.
4 Quit this menu by pressing the
button.
Rerouting fax messages to a USB
memory key
It allows you to:
•
Consult or modify the waiting queue. In this waiting
queue the documents are coded the following way:
Order number in the queue / document status /
subscriber’s telephone number.
Documents may have the following status:
- TX: transmission
This function allows you to reroute received fax messages
directly in the folder MFPrinter Laser Pro LL2\FAX on a
USB memory key connected to your terminal. The folder
MFPrinter Laser Pro LL2\FAX is created by the
application. The USB memory key then becomes the
terminal reception memory.
- REL: relay
- DOC: in deposit
- POL: polling
- MBX: send to mailbox
- PMB: mailbox polling
- TR: ongoing commands
Fax messages that are rerouted are therefore saved on
the USB memory key with format Tiff and are named as
follows:
"FAXYYMMDDHHMMSS"
where
YYMMDDHHMMSS corresponds to the fax reception
date and time.
- SMS: SMS transmission
•
•
•
Immediately perform a transmission from the waiting
queue,
You can also print fax messages rerouted to your USB
memory key automatically by activating menu 052
PRINT.
Print a document in storage, waiting to be transmitted
or in deposit,
Print the waiting queue, in order to get the status of
each document in the queue, by either:
- queue order number,
Activating rerouting
- document name or number,
Before activating this function,
- scheduled transmission time (fax),
- operation type regarding the document: transmission
from memory, delayed transmission, deposit,
- number of pages of the document,
- document size (percentage of space stored in
memory)
connect the USB memory key to the
terminal.
Important
ꢀ051 - MEDIA / FAX ARCHIVING / ACTIVATION
1 Press ꢀ, enter 051 using the keypad.
•
Cancel a transmission request in the waiting queue.
2 Using the keys ꢀand ꢁwithin the navigator,
select option ON and confirm your choice with OK.
Performing immediate transmission from
the waiting queue
3 Quit this menu by pressing the
button.
ꢀ61 - COMMANDS / PERFORM
1 Press ꢀ, enter 61 using the keypad.
2 Select the document in the waiting queue.
3 Confirm your choice with OK or
to
immediately perform the selected transmission.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Consulting or modifying the waiting queue
MailBoxes (MBX Fax)
ꢀ62 - COMMANDS / MODIFY
There are 32 mailboxes (MBX), enabling you to transmit
documents in complete confidence using an access code
(named MBX code), to all subscribers equipped with a fax
compatible to yours.
1 Press ꢀ, enter 62 using the keypad.
2 In the waiting queue select the required document
and confirm your choice with OK.
MBX 00 is public. It is handled directly by the terminal to
record the messages of the fax TAD as soon as this is put
into service.
3 You may now modify the parameters of the given
document then confirm your modifications by
pressing
.
MBX’s 01 to 31 are private. Each is password-protected.
They can be used to receive documents confidentially.
Deleting a transmission on hold
The use and access to MBX 01 - 31 are conditioned by
the initialisation, defined by a MBX code (if needed) and
a mnemonic (its S.I.D.).
ꢀ63 - COMMANDS / CANCEL
1 Press ꢀ, enter 63 using the keypad.
2 In the waiting queue select the desired document
Later you may:
and confirm your choice with OK.
•
•
modify the features of an MBX,
print the contents of an MBX, only possible if the MBX
contains one or more documents (with a star next to
the MBX). When the contents of an MBX have been
printed it becomes empty,
Printing a document in waiting or in deposit
ꢀ64 - COMMANDS / PRINT
1 Press ꢀ, enter 64 using the keypad.
•
•
delete an MBX, only if the MBX is initialised and
empty,
2 In the waiting queue select the desired document
and confirm your choice with OK.
print the list of your fax machine’s MBX’s.
You may receive and send through an MBX in complete
confidentiality.
Printing the waiting queue
ꢀ65 - COMMANDS / PRINT LIST
When depositing a document into your MBX, the access
code is not needed. All documents deposited in a MBX
are added to the ones already present.
Press ꢀ, enter 65 using the keypad.
You can also print the waiting queue with
Note
In polling, the MBX’s are only accessible with an MBX
code.
menu ꢀ57 - PRINT / COMMANDS.
A document called ** COMMAND LIST ** is printed.
You may perform MBX deposits or polls by:
•
•
depositing a document in a fax MBX,
Cancelling a transmission in
progress
transmitting to deposit a document in a remote fax
MBX,
•
performing document poll from a remote fax.
Cancelling a transmission in progress is possible no
matter what the type of transmission but varies depending
on whether the transmission is a single call number or a
multi-call number.
Creating an MBX
ꢀ71 - MAILBOXES / CREATE MBX
•
•
For a single call number from the memory, the
document is erased from the memory.
1 Press ꢀ, enter 71 using the keypad.
2 Select a free MBX out of the 31 MBX or directly
enter the number of a free MBX and confirm
with OK.
For a multi-call number, only the call number in
progress at the time of the cancellation is erased from
the transmission queue.
3 Select option MAILBOX CODE and press OK.
Value 0000 is always displayed.
To cancel transmission in progress:
4 Enter the code of your choice, if needed, and
press OK.
1 Press
.
5 Select option MAILBOX NAME and press OK.
A message will ask you to confirm cancellation.
6 Enter this MBX’s S.I.D. (20 characters max.) and
press OK.
2 Press
to confirm cancellation in progress.
The MBX is initialised. If you wish to initialise
another, press C and repeat the same procedure.
If your machine is set to print a transmission report, it will
print that the communication was cancelled by the user.
7 To exit the MBX, press
.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Modifying the features of a MBX
MBX deposit in your fax
ꢀ71 - MAILBOXES / CREATE MBX
1 Insert the document in the fax machine’s feeder.
2 Select ꢀ72 - MAILBOXES / DEPOSIT MBX.
1 Press ꢀ, enter 71 using the keypad.
3 Select the desired MBX out of the 31 MBX’s, or
enter the number of the MBX directly and
press OK.
2 Select the desired MBX out of the 31 MBX’s, or
enter the number of the MBX directly and
press OK.
The document is placed in the feeder and saved in the
selected MBX.
3 Enter the code of this MBX, if there is one, and
confirm with OK.
4 Select the menu MAILBOX CODE or MAILBOX
MBX deposit in a remote fax
NAME, then confirm your choice with OK.
5 Perform data modification of the menu and confirm
1 Insert the document in the fax machine’s feeder.
with OK.
2 Select ꢀ35 - FAX / MBX SENDING.
3 Enter your subscriber’s number for MBX deposit or
If needed, repeat the last two steps for the other menu.
choose your dialling mode and validate with OK.
4 Enter the subscriber’s MBX number and confirm
Printing the contents of a MBX
with OK.
ꢀ73 - MAILBOXES / PRINT MBX
5 If you wish to delay transmission, enter the new
transmission time next to the current time and
press OK.
1 Press ꢀ, enter 73 using the keypad.
2 Select the desired MBX out of the 31 MBX’s, or
enter the number of the MBX directly and
press OK.
6 If you wish to modify the document feed type,
select one of the options FEEDER or MEMORY,
and press OK.
3 Enter the code of this MBX, if there is one, and
7 If you wish, you may enter the number of pages of
your document before transmitting and confirm
with OK.
confirm with OK.
All documents found in the MBX are printed and the MBX
is emptied.
8 Confirm the transmission request to a remote MBX
fax by pressing
.
Deleting a MBX
In the case of an immediate transmission, the document
is sent immediately.
Before deleting an MBX, you need to make sure it is
empty, by printing its content.
If the document is set for a postponed transmission, the
document will be stored in the memory and sent at the
requested time.
ꢀ74 - MAILBOXES / DELETE MBX
1 Press ꢀ, enter 74 using the keypad.
2 Select the desired MBX out of the 31 MBX’s, or
enter the number of the MBX directly and
press OK.
MBX polling from a remote fax
ꢀ36 - FAX / MBX POLLING
3 Enter the code of this MBX, if there is one, and
confirm with OK.
Please check for remote fax
compatibility.
Note
4 Press OK to confirm the MBX deletion.
The MBX is deleted and will appear as a free MBX in the
list.
1 Press ꢀ, enter 36 using the keypad.
2 Enter your subscriber’s number for MBX polling or
choose your dialling mode and confirm with OK.
Printing the MBX list
3 Enter the subscriber MBX number and press OK.
ꢀ75 - MAILBOXES / PRT MBX LIST
4 Enter this MBX access code and press OK.
5 If you wish to delay the poll time, enter the
departure time next to the current time and
press OK.
Press ꢀ, enter 75 using the keypad.
You can also print the MBX list with menu
Note
6 Confirm the MBX poll request by pressing
.
ꢀ58 - PRINT / LIST MBX.
As soon as the remote fax is subscribed, either
immediately or later, the document(s) in the remote fax
MBX are received in your fax.
The list gives the status of each MBX.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Deposit and Polling
You may deposit a document in your fax and keep it
available to one or more subscribers who can obtain a fax
of this document by calling your fax with the POLL
function.
Setting the machine for document deposits, you must
define the type:
•
•
SIMPLE- it may be polled only once from the memory
or feeder,
MULTIPLE- it may be polled as many times as
necessary from the memory.
Setting the machine for polled documents, you must
define the poll number, then depending on the type of poll
you may:
•
•
•
launch an immediate poll,
program a delayed poll with a chosen time,
launch a multi-poll, either immediately or later.
Placing a document in deposit
1 Insert the document to deposit in the feeder.
2 Select ꢀ34 - FAX / POLLING TX.
3 Choose the deposit type, according to the table
below:
Menu
Procedure
1 Select FEEDER or MEMORY.
2 If necessary, adjust the contrast
Simple
and confirm with OK.
3 Enter the number of pages that you
wish to deposit.
1 If necessary, adjust the contrast
and confirm with OK.
Multiple
2 Enter the number of pages that you
wish to deposit.
4 Confirm deposit by pressing OK.
Polling a deposited document
ꢀ33 - FAX / POLLING RX
1 Select ꢀ33 - FAX / POLLING RX.
2 Enter the number of the party whose document you
want to poll or choose your dialling mode.
You can poll several documents using the
key
.
3 Depending on the type of poll, you should:
Menu
Procedure
Immediate
poll
1 Press
.
1 Press OK.
2 Next to the current time, enter
Delayed poll
the time you wish to poll the
document and press
.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Sending an SMS
SMS
1 Press the
key.
2 Write your SMS using the alphabetical keypad.
The SMS service is dependent upon
the country and the service provider.
To do so, an editor is at your disposal:
Important
•
•
for upper case letters, use the Ï key,
to move inside the data entry field, use ꢀ
and ꢁ,
Thanks to the SMS button, you can send an SMS to
subscribers all over the world. An SMS (Short Message
Service) is a service which permits short written
messages to be sent to mobile phones or other SMS-
compatible devices.
The number of characters you can send per message is
dependent upon the service provider and the country you
are sending your SMS from (e.g. France 160 characters,
Italy 640 characters).
•
to move in the text from one word to another,
press CTRL and one of the navigator keys (ꢀ
or ꢁ).
•
•
to go to the next line, use
,
to delete a character (by moving the cursor to
the left), use Í or C.
3 Validate with OK.
4 Dial the number of the recipient (mobile phone or
any other SMS-compatible device) in one of the
following ways:
There is a special scale of charges for
the SMS service.
Note
•
•
dial the number using the numerical keypad,
enter the first letters of the recipient name,
SMS Parameters
•
press the
key until the required name
appears (names are classified in alphabetical
order).
Presentation of the sender
This setting allows you to show the name or the number
of the sender when sending an SMS.
Your SMS may be sent to only one person or to
several people. To send an SMS:
•
•
to only one person, press OK to confirm.
ꢀ41 - SMS SERVICE / SENDER
to several people:
1 Press ꢀ, enter 41 using the keypad.
5 Press the
key and enter the next recipient's
2 Select the required presentation of the sender
number.
option, ON or OFF, using the ꢀor ꢁkeys.
6 Repeat the operations as many times as required
(10 persons max.). Press OK to validate the last
recipient; "SENDING SMS" is displayed as the
SMS is being sent.
3 Validate with OK.
SMS Center transmission number
This setting allows you to enter the transmission number
for the SMS Server. Your Internet provider will provide
you with this number.
•
•
If SMS appears, then the SMS has been put on hold
and a further attempt will take place a couple of
minutes later. To immediately execute or cancel
ꢀ421 - SMS SERVICE / INIT. SMS / SERVER
1 Press ꢀ, enter 421 using the keypad.
To check the SMS has been sent properly, you may
print the transmission/reception log (refer to paragraph
2 Enter the number of the transmission server using
the numerical keypad.
3 Validate with OK.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Automatic mode
ꢀ212 - SETUP / DATE/TIME / AUTO ADJUST
Parameters/
Setup
If you select OFF and confirm with OK, the summer /
winter time will not be changed automatically. For the
machine to be set to the new time, you will need to use the
211 MODIFY menu.
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
If you select ON and confirm with OK, you will not have to
care about any change at the end of March (+1h) and
October (-1h). You will just be informed of this change by
a message on the screen.
You can print the functions guide and the available setup
of your multifunction machine.
The default parameter is OFF.
Your machine is continuously being
updated, new functions are regularly
made available.
Warning message
To
benefit,
visit
our
website
On automatic changing to summer / winter time, a
message will be displayed to inform you that the
multifunction machine time has been changed.
can also use the update function
available with the Companion Suite Pro
software to download the latest online
Note
25-03-07 02:01
CHECK TIME
or
Date/Time
28-10-07 02:01
CHECK TIME
At any moment you may change the date and time on
your multifunction machine.
Your next action on the multifunction keypad will cause
the message to be automatically cleared.
Depending on the country configured on the machine, the
date format is of type DDMMYY (e.g.: France) or
MMDDYY (e.g.: USA).
Your fax number/Your name
ꢀ21 - SETUP / DATE/TIME
Your multifunction machine will print out your fax number
and your name on each document it transmits if you save
these settings.
1 Press ꢀ, enter 21 using the keypad. Confirm
with OK.
2 Enter the numbers of the required time and date
one after another (for example November 8 2004 at
9h33, press 0811040933 or 1108040933) and
press OK to confirm.
To benefit from this feature, you
must set SENDING HEADER to ON
(see
3 To exit this menu, press
.
The SENDING HEADER feature is
by default activated on the US
model and cannot be modified.
Summer time / Winter time setting
This menu lets you choose to change to summer / winter
time automatically or not.
To save your fax number and name:
ꢀ22 - SETUP / NUMBER/NAME
1 Press ꢀ, enter 22 using the keypad.
This function is only available if the
Important country configured on the machine is
part of the European Union.
2 Enter your fax number (20 digits max.) and
press OK to confirm.
The 21>DATE/TIME menu includes 2 submenus:
Manual mode
3 Enter your name (20 characters max) then press
OK to confirm.
For example, if you want to type the letter C, press
the key C until it appears on the screen.
ꢀ211 - SETUP / DATE/TIME / MODIFY
Your multifunction machine will prompt you to change the
date and time via the numerical keypad.
4 To exit this menu, press
.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
To manually select the type of public telephone network:
Type of network
ꢀ202 - SETUP / GEOGRAPHICAL / NETWORK
You can connect your fax to either a PSTN or a private
network such as private automatic branch exchange
(PABX). You must select the network which is the most
convenient.
1 Press ꢀ, enter 202 using the keypad.
2 Select the required option and press the OK key to
confirm.
To select the type of network:
3 To exit this menu, press
.
ꢀ251 - SETUP / TEL. NETWORK / NETWORK TYPE
If none of the options in the list is
suitable, select the "OTHER X"
option:
1 Press ꢀ, enter 251 using the keypad.
2 Select option PABX or PSTN then confirm your
choice with OK.
•
•
•
•
•
•
OTHER 1 = TRB21
OTHER 2 = US
3 To exit this menu, press
.
Important
If you are connecting your machine to a private network,
behind a company’s PABX, you may need to specify a
OTHER 3 = Russia
OTHER 4 = Jordan
OTHER 5 = Israel
OTHER 6 = TRB21
Geographical settings
Language
These settings will enable you to use your machine in
different preset countries using different languages.
This setting enables you to choose the menu language of
your choice. By default, the multifunction machine is set
to English.
Country
By choosing a country, you initialise:
To select the language:
•
•
the settings for the public telephone network,
the language by default.
ꢀ203 - SETUP / GEOGRAPHICAL / LANGUAGE
To select the country:
ꢀ201 - SETUP / GEOGRAPHICAL / COUNTRY
1 Press ꢀ, enter 203 using the keypad.
2 Select the required language using ꢀand ꢁ, then
press the OK key to confirm.
1 Press ꢀ, enter 201 using the keypad.
3 To exit this menu, press
.
2 Select the required option and press the OK key to
confirm.
Local prefix
3 To exit this menu, press
.
This function is used when your fax is installed with a
private network, behind a company’s PABX. It allows you
to program an additional automatic local prefix (to be
defined), enabling you to automatically exit the
company’s telephone network system, but only under
certain conditions:
If none of the options in the list is
suitable, select the "OTHER" option.
Important
Telecommuncation Network
•
the company’s internal numbers, where a prefix is not
required, must be short numbers less than the
minimal size (to be defined, for example France has
10 digits),
This setting enables you to manually set the type of public
telephone network (PSTN) for a country, so that your
machine can communicate over the public telephone
network in compliance with the applicable standards.
•
the outside numbers requiring a prefix, must be long
numbers greater or equal to the minimal size (to be
defined, for example France has 10 digits).
By default, setting a country using the ꢀ201
command automatically sets the type of PSTN to use
in the selected country.
Programming your fax with the local prefix consists of two
steps:
These settings are different from the
NETWORK TYPE, which allows you
to choose between public and
private network.
1 defining the minimal size (or equal) of the
company’s outside numbers,
Important
2 defining the outgoing local prefix of the company’s
telephone network. This prefix will automatically be
added as soon as an external number is dialled.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Document feed type
You may choose the way you want to feed your
documents:
If you define a local prefix, do not
add it to the numbers stored in
Important the
directory,
it
will
be
•
from memory, transmission will take place only after
memory storage of the document and dialling.
It allows you to get your originals back quickly to free
up the machine.
automatically dialled with each
number.
ꢀ252 - SETUP / TEL. NETWORK / PREFIX
•
from the feeder of the sheet-feed scanner,
transmission will occur after dialling and paper
scanning. It allows transmission of larger documents.
1 Press ꢀ, enter 252 using the keypad.
2 Enter the required minimal SIZE NUMBER of the
company’s outside numbers and confirm with OK.
The minimal size will range between 1 and 30.
To select the way you want to feed your documents:
3 Enter the required outgoing local PREFIX of the
company’s telephone network (maximum 10
characters) and confirm with OK.
ꢀ232 - SETUP / SEND / MEMORY SEND.
1 Press ꢀ, enter 232 using the keypad.
To insert a pause for dial tone ("/" sign),
press simultaneously the CTRL and M
2 Select the option MEMORY or FEEDER and
confirm your choice with OK.
Note
keys, or long press the 0 (zero) key on
the numerical keypad until the "/" sign
is displayed.
In feeder mode, reduced images will not appear on
the transmission report.
3 To exit this menu, press
.
4 To exit this menu, press
.
Economy period
This function allows you to defer a fax transmission to "off-
peak hours" and thus reduce the cost of your
communications.
Transmission report
You may print
a
transmission report for all
communications over the telephone network (PSTN).
The economy period, via the telephone network (at off-
peak hours), is preset by default from 7.00 pm to 7.30 am.
Nevertheless you may change this time slot.
You may choose between more than one criteria for
printing reports:
•
ON: a report is given when the transmission was
properly performed or when it is completely
To modify the economy period:
abandoned (but there is only one report per request),
ꢀ233 - SETUP / SEND / ECO PER.
•
OFF: no transmission report, however, your fax will
note all transmissions that took place in its log,
1 Press ꢀ, enter 233 using the keypad.
•
•
ALWAYS: a report is printed with each transmission,
2 Enter the hours of the new economy period (for
example 19:00-07:30) and confirm your choice
with OK.
ON ERROR: a report is printed only if the transmission
failed or is abandoned.
3 To exit this menu, press
.
With each transmission report from memory, a reduced
version of the first page is automatically reproduced.
To use the economy period:
To select the report type:
ꢀ32 - FAX / ECO TRANS.
ꢀ231 - SETUP / SEND / SEND REPORT
1 Select ꢀ32 - FAX / ECO TRANS.
1 Press ꢀ, enter 231 using the keypad.
2 Enter the call number and confirm with OK.
3 Adjust the contrast and confirm with OK.
2 Select the required option ON, OFF, ALWAYS or
ON ERROR and confirm your choice with OK.
4 Select the feed type, FEEDER or MEMORY and
confirm with OK.
3 To exit this menu, press
.
5 You may enter the number of pages before
transmission and confirm with OK.
6 If you are using the flatbed scanner, you can scan
more than one page. Place the next page on the
scanner, select NEXT and confirm with OK. Select
DONE when all pages have been scanned.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Reception Mode
Reception without paper
This function enables you, if you have an external device Your fax offers you the possibility to either accept or
(telephone, answering machine) plugged in to the EXT refuse document reception if your printer is unavailable
socket on your terminal, via USB or to the telephone plug (no paper...).
adapter, to select the device receiving faxes and/or voice
messages.
If your fax printer is unavailable, you may choose between
two modes of reception:
You may choose between the following reception modes :
•
reception mode WITHOUT PAPER, your fax saves
the incoming messages in the memory,
•
MANUAL : the terminal does not receive any
documents automatically. When you answer your
telephone and realise that you are receiving a fax, you
•
reception mode WITH PAPER, your fax refuses all
incoming subscribers.
To select the reception mode:
ꢀ242 - SETUP / RECEPTION / REC. PAPER
should press the
the fax.
button on the terminal to receive
•
•
FAX : the Fax reception mode is launched on the
terminal systematically.
1 Press ꢀ, enter 242 using the keypad.
FAX-ANSWER. : the terminal handles reception of fax
messages automatically, the external device handles
reception of telephone communications automatically.
Press the #0 buttons on your telephone to cancel fax
detection.
2 Select the option WITH PAPER or WITHOUT
PAPER and confirm your choice with OK.
3 To exit this menu, press
.
Paper out is indicated by a beep and
a message on the screen.
Received faxes are then stored in
•
FAX-TEL : the terminal handles reception of fax
messages automatically, the DECT base (and
registered handsets) handles reception of telephone
communications automatically.
Important
memory (icon
flashing) to be
printed as soon as you add paper
into the feeder.
Press the #0 buttons on your telephone to cancel fax
detection.
To set the reception mode:
ꢀ241 - SETUP / RECEPTION / MODE
Number of copies
You may print incoming documents more than once (1 to
99).
1 Press ꢀ, enter 241 using the keypad.
2 Select the required option and confirm with OK.
To set the number of each document received:
3 To exit this menu, press
.
ꢀ243 - SETUP / RECEPTION / NBR OF COPIES
1 Press ꢀ, enter 243 using the keypad.
If you have connected a telephone to
the EXT socket on your terminal or
to a telephone plug adaptor, we
recommend that you set the
reception mode to MANUAL.
2 Enter the wanted number of copies and confirm
with OK.
3 To exit this menu, press
.
At each document reception, your fax will print the
number of copies requested.
If you have connected a DECT base
to the USB port of your terminal, we
recommend that you set the
reception mode to FAX-TEL.
Fax or PC reception
Important
This menu, combined with a software program installed
on your PC will enable you to select the machine you wish
to receive the documents on:
When you receive a call, you pick up
using this telephone and you hear
the particular fax tone. You can:
•
•
•
fax,
- press the
button on your
PC,
PC if available, fax otherwise.
terminal or buttons #7 on your
telephone to receive the fax.
ꢀ244 - SETUP / RECEPTION / PC RECEPT.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 With the keys ꢀ or ꢁ, modify the parameter
Adjust to page
settings by following the table below and press OK.
This menu allows you to print out received faxes
automatically adjusting them to the page format.
Received faxes are then automatically reduced or
enlarged to fit the page format which is used on the
machine.
Parameter
Signification
1 - Scanning mode
Default value of the scan mode
resolution for the documents to be
transmitted.
To turn adjust to page mode on:
ꢀ245 - SETUP / RECEPTION / AUTO ADJUST.
2 - TX header
Important: this parameter is by
default activated on the US model
and cannot be modified.
1 Press ꢀ, enter 245 using the keypad.
2 Select the option ON or OFF and confirm with OK.
If this parameter is on, your header
will appear on all documents sent
to your subscribers with your
name, number, date and number
of pages.
3 To exit this menu, press
.
Received faxes reduction mode
Warning: If you send a fax from
the document loader, the
transmission header will not
appear on the document your
correspondent receives.
This menu allows you to reduce received faxes for
printing. This adjustment can be automatic or manual.
Automatic mode:
This mode automatically resizes received faxes.
3 - TX speed
Transmission speed for outgoing
documents.
To set automatic mode:
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
ꢀ246 - SETUP / RECEPTION / REDUCTION
1 Press ꢀ, enter 246 using the keypad.
2 Select AUTOMATIC and confirm with OK.
However, it may be necessary to
restrict the transmission speed for
some calls.
3 To exit this menu, press
.
Manual mode:
4 - Echo protect
6 - EPT mode
If this parameter is on, the on-line
echo will be reduced during long
distance calls.
The machine proposes a 70 to 100 % reduction. Outside
these values, the machine beeps for error. This fixed
reduction will be used when printing received documents,
regardless of the used paper format.
For some long distance calls
(satellite), the on-line echo may
disturb the call.
To set the manual mode:
ꢀ246 - SETUP / RECEPTION / REDUCTION
7 - COM. display
8 - Eco energy
Choice between transmission
speed displayed or number of the
page in progress.
1 Press ꢀ, enter 246 using the keypad.
2 Select FIXED and confirm with OK.
Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
3 Enter the reduction value (between 70 and 100)
and confirm with OK.
4 To exit this menu, press
.
Technical Parameters
Note: you can also access this
parameter by pressing the
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
key from the idle screen.
10 - RX header
If this parameter is on, all
documents received by your fax
will include the subscriber’s header
with his/her name, number (if
available) fax print date and the
page number.
To set the technical parameters:
ꢀ29 - SETUP / TECHNICALS
1 Press ꢀ, enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Printing the functions guide
Parameter
Signification
11 - RX speed
Transmission speed for incoming
documents.
The printing is not possible on A5
(or Statement) paper format.
Important
For a quality telephone line
(compatible, no echo),
communications occur at
maximum speed.
ꢀ51 - PRINT / FUNCTIONS LIST
Press ꢀ, enter 51 using the keypad.
However, it may be necessary to
restrict the transmission speed for
some calls.
The printing of the functions guide starts.
You can also access the PRINT menu
by pressing the button.
Note
12 - Rings
Number of rings to automatically
start your machine.
13 - Discard size
The Discard Size parameter only
defines the printing of received
faxes. The number of lines of a
document can be too high for the
printing paper format. This
Printing the logs
The printing is not possible on A5
(or Statement) paper format.
Important
parameter defines the threshold
beyond which the extra lines are
printed on a second page. Below
this threshold, extras lines are
deleted.
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
If you choose ON, the threshold is
set on 3 centimeters.
If you choose OFF, the threshold is
set on 1 centimeter.
Each log (incoming or outgoing) contains a table with the
following information:
•
•
•
•
•
•
date and time of the incoming or outgoing document,
subscriber’s number or E-mail address,
transmission mode (Normal, Fine, SFine or Photo),
number of pages sent or received,
20 - E.C.M.
This parameter helps correct the
calls made on disturbed telephone
lines. It is used when the lines are
weak or too noisy. Transmission
times may be longer.
call duration,
incoming or outgoing results: noted CORRECT if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
25 - TEL Impedance
This parameter lets you choose
between a complex impedance
and a 600 Ohm impedance,
depending on the telephone
network your terminal is connected
to.
•
reason for call error (example: your subscriber does
not answer).
80 - Toner save
90 - RAW Port
Makes printing lighter to save toner
cartridge ink.
To print the logs:
RAW network print port
connection.
ꢀ54 - PRINT / LOGS
Press ꢀ, enter 54 using the keypad.
91 - Printer error
timeout
Time-out before document being
printed is deleted following a print
error in PC print mode.
The printing of the logs starts. The incoming and outgoing
logs are printed on the same page.
92 - Printer wait
timeout
Wait time-out for data from PC
before the task is deleted in PC
print.
You can also access the PRINT menu
Note
by pressing the
button.
93 - Replace format
Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
96 - NBR. WEP
Keys
Number of WEP keys allowed
(from 1 to 4).
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
2 Enter the four-digit locking code with the keypad.
Print the list of setups
3 Press OK to confirm.
4 With the buttons ꢀ or ꢁ, choose DIRECT ONLY
The printing is not possible on A5
(or Statement) paper format.
Important
and confirm with OK.
5 Quit this menu by pressing the
button.
To print the list of setups:
ꢀ56 - PRINT / SETUP
Lock the SMS service
This function prevents access to the SMS service.
To access the SMS service locking menu:
Press ꢀ, enter 56 using the keypad.
The printing of the list of setups starts.
ꢀ815 - ADVANCED FCT / LOCK / LOCK SMS
You can also access the PRINT menu
by pressing the button.
Note
1 Press ꢀ, enter 815 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
Lock the machine
4 With the buttons ꢀ or ꢁ, choose ON and confirm
with OK.
This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
5 Quit this menu by pressing the
button.
Lock the Media service
This function prevents access to the Media service. The
access code will be required every time someone wants
to use the USB key functions:
Before that you have to enter a lock code.
ꢀ811 - ADVANCED FCT / LOCK / LOCKING CODE
•
•
•
analyse the contents of a connected USB key,
print from a USB key, delete files,
1 Press ꢀ, enter 811 using the keypad.
2 Enter your lock code (4 digits) with the keyboard,
archive received faxes on a USB key.
confirm with OK.
To access the Media service locking menu:
If a code is already registered, enter
Important the old code before typing the new
one.
ꢀ816 - ADVANCED FCT / LOCK / LOCK MEDIA
1 Press ꢀ, enter 816 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
3 Enter again your lock code (4 digits) with the
keyboard, confirm with OK.
4 Quit this menu by pressing the
button.
4 With the buttons ꢀ or ꢁ, choose ON and confirm
with OK.
Lock the keyboard
5 Quit this menu by pressing the
button.
Every time you use your machine, you will have to enter
your code.
Read the counters
ꢀ812 - ADVANCED FCT / LOCK / LOCK KEYBD.
This function allows you to view the activity counters for
your machine at any time.
1 Press ꢀ, enter 812 using the keypad.
2 Enter the four-digit locking code with the keypad.
3 Press OK to confirm.
According to your needs, you can read the counters for:
•
•
•
•
sent pages,
4 With the buttons ꢀ or ꢁ, choose ON and confirm
received pages,
scanned pages,
printed pages.
with OK.
5 Quit this menu by pressing the
button.
Lock the numbers
Sent pages counter
This function locks dialling and the numerical keypad is
disabled. Transmissions are only possible from numbers
included in the directory.
To view the number of pages sent from your machine:
ꢀ821 - ADVANCED FCT / COUNTERS / SENT PAGES
To access the number interlocking option:
1 Press ꢀ, enter 821 using the keypad.
ꢀ813 - ADVANCED FCT / LOCK / LOCK NUMBER
2 The number of sent pages appears on the screen.
1 Press ꢀ, enter 813 using the keypad.
3 Quit this menu by pressing the
button.
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Received pages counter
To view the number of pages received on your machine:
ꢀ822 - ADVANCED FCT / COUNTERS / RECEIVED
PG
1 Press ꢀ, enter 822 using the keypad.
2 The number of received pages appears on the
screen.
3 Quit this menu by pressing the
button.
Scanned pages counter
To view the number of pages scanned on your machine:
ꢀ823 - ADVANCED FCT / COUNTERS / SCANNED
PAGE
1 Press ꢀ, enter 823 using the keypad.
2 The number of scanned pages appears on the
screen.
3 Quit this menu by pressing the
button.
Printed pages counter
To view the number of pages printed on your machine:
ꢀ824 - ADVANCED FCT / COUNTERS / PRINTED PG
1 Press ꢀ, enter 824 using the keypad.
2 The number of printed pages appears on the
screen.
3 Quit this menu by pressing the
button.
Display the consumables status
You can read at any time the remaining toner in the
cartridge. This level appears in percentage.
ꢀ86 - ADVANCED FCT / CONSUMABLES
1 Press ꢀ, enter 86 using the keypad.
2 The available toner percentage appears on the
screen.
3 Quit this menu by pressing the
button.
Calibrate your scanner
You can do this operation when the quality of photocopied
documents is not satisfactory anymore.
ꢀ80 - ADVANCED FCT / CALIBRATION
1 Press ꢀ, enter 80 using the keypad. Confirm
with OK.
2 The scanner is triggered and a calibration is done
automatically.
3 At the end of the calibration, the machine comes
back to the screen saver.
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Creating subscribers list
Directory
To create subscribers list:
Your multifunction machine lets you create a directory by
memorising subscriber records and subscriber lists. Your
machine can store up to 250 subscriber records, which
you can group in 20 subscriber lists.
ꢀ12 - DIRECTORY / NEW GROUP
1 Press ꢀ, enter 12 using the keypad.
2 Enter the LIST NAME with the alphanumerical
keypad (20 characters maximum), confirm
with OK.
For all subscriber records or subscriber lists you may
create, consult, modify or delete contents. You can also
print the directory.
3 CALLED NUMBER: use ꢀor ꢁto select from
existing records the contacts of your list and
confirm with OK. Repeat this operation for each
subscriber you want to add to your list.
Furthermore, your machine lets you create and manage
your phone directory from your PC Kit. For more
4 Enter the GROUP NUMBER assigned to your list
with the numerical keypad or accept the displayed
number, and confirm with OK.
Creating subscribers record
To create subscribers record:
In the directory, the letter G placed
next to a name identifies a
subscribers group.
Important
ꢀ11 - DIRECTORY / NEW CONTACT
1 Press ꢀ, enter 11 using the keypad.
2 Enter the NAME of your contact with the
alphanumerical keypad (20 characters maximum),
confirm with OK.
Modifying a record
To modify a subscribers record or list:
3 Enter the TEL number of your contact with the
numerical keypad (30 digits maximum), confirm
with OK.
ꢀ13 - DIRECTORY / MODIFY
1 Press ꢀ, enter 13 using the keypad.
4 Choose the RECORD NO from your directory with
the numerical keypad or accept the displayed
number, and confirm with OK.
2 With ꢀor ꢁ, browse the directory and select the
record or list you want to modify by pressing OK.
3 With ꢀor ꢁ, browse the entries of the selected
record or list. Press OK when the entry you want to
modify appears on screen.
5 Select W. ASSOC. KEY if you want to assign a
shortcut key (letter) to your subscriber record. The
first available letter appears, use ꢀor ꢁto choose
another letter. Confirm with OK.
4 The cursor appears at the end of the line. Press C
to delete characters.
6 Select the appropriate transmission RATE to send
faxes among the values 2400, 4800, 7200, 9600,
12000, 14400 and 33600 using ꢀor ꢁ. Confirm
with OK.
5 Enter the new entry and confirm with OK.
6 Repeat the operations for each line you want to
modify.
The maximum speed can be used if the telephone
line is of good quality, meaning appropriate,
without echo.
Deleting a record or a list
To delete a subscribers record or list:
ꢀ14 - DIRECTORY / CANCEL
If your multifunction machine is
connected to a PABX, you may
insert a pause for dial tone after the
outgoing local prefix dialling.
1 Press ꢀ, enter 14 using the keypad.
2 With ꢀor ꢁ, browse the directory and select the
record or list you want to delete by pressing OK.
To insert a pause for dial tone ("/"
3 Press OK to confirm the deletion.
sign), press simultaneously the
CTRL and M keys, or long press the
0 (zero) key on the numerical
Important
4 Repeat the operations for each record or list you
want to delete.
keypad until the "/" sign is displayed.
For more details, refer to Local
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Printing the directory
The printing is not possible on A5
(or Statement) paper format.
Important
To print the directory:
ꢀ15 - DIRECTORY / PRINT
Press ꢀ, enter 15 using the keypad.
The printing of the directory starts, in alphabetical order.
You can also print the directory with
Note
menu ꢀ55 - PRINT / DIRECTORY.
Saving/Restoring the directory
(Smart card option)
This function enables you to save the contents of your
directory on a Smart card and restore them on your
machine.
This function is only available to
service technician with Smart
card.
Important
To save the contents of your directory on your Smart
card:
ꢀ161 - DIRECTORY / SAVE/LOAD / SAVE
1 Press ꢀ, enter 16 using the keypad.
2 Select SAVE to save directory entries on the Smart
card and confirm with OK.
3 Insert your Smart card.
To restore the contents of your directory from your Smart
card:
ꢀ162 - DIRECTORY / SAVE/LOAD / LOAD
1 Press ꢀ, enter 16 using the keypad.
2 Select LOAD to restore directory entries from the
Smart card and confirm with OK.
3 Confirm with OK.
4 Insert your Smart card.
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Confirm with OK.
Games and
Calendar
Sudoku
4 Select PRT SOLUTION using the ꢀor ꢁbutton.
5 Select the level of difficulty EASY, MEDIUM,
HARD, EVIL using the ꢀor ꢁbutton.
6 Confirm with OK.
7 Choose the grid you want by entering the number
on the numeric keypad (1 to 100).
8 Confirm with OK.
9 Choose the number of copies you want by entering
Sudoku is a Japanese puzzle. The game is in a grid
format of three squares by three squares to be distributed
in fields in zones of 3 × 3. Depending on the level of
difficulty, more or fewer numbers are already entered at
the start of the game. The aim of the game is to distribute
the numbers 1 to 9 between the boxes in such a way that
each number appears only once in each row, column and
in each of the nine grids. There is only one solution.
a number from 1 to 9 on the numeric keypad.
10 Confirm with OK.
The number of copies of the solution to the grid requested
is printed.
Calendar
This function enables you to print the calendar for a year
of your choice.
Print a grid
There are 400 Sudoku grids available in total, 100 for
each difficulty level.
The printing is not possible on A5
Important
(or Statement) paper format.
The printing is not possible on A5
Important
(or Statement) paper format.
ꢀ 53 - PRINT / CALENDAR
ꢀ 521 - PRINT / SUDOKU / PRINT GRID
1 Press ꢀ, enter 5 using the keypad. Confirm
with OK.
1 Press ꢀ, enter 5 using the keypad. Confirm
with OK.
You can also access the PRINT menu
Note
You can also access the PRINT menu
by pressing the
button.
Note
by pressing the
button.
2 Select CALENDAR using the ꢀor ꢁbutton.
2 Select SUDOKU using the ꢀor ꢁ button.
3 Confirm with OK.
3 Confirm with OK.
4 Choose the year you want to print as calendar by
entering the number on the numeric keypad (for
example: 2009).
4 Select PRINT GRID using the ꢀor ꢁ button.
5 Select the level of difficulty EASY, MEDIUM,
HARD, EVIL using the ꢀor ꢁbutton.
The year must be between 1900 and
2099. Use the C key to correct an
6 Confirm with OK.
Note
7 Choose the grid you want by entering the number
entry.
on the numeric keypad (1 to 100).
5 Confirm with OK.
8 Confirm with OK.
The calendar of the year requested is printed.
9 Choose the number of copies you want by entering
a number from 1 to 9 on the numeric keypad.
10 Confirm with OK.
The number of copies of the grid requested is printed.
Print the solution to a grid
The printing is not possible on A5
Important
(or Statement) paper format.
ꢀ 522 - PRINT / SUDOKU / PRT SOLUTION
1 Press ꢀ, enter 5 using the keypad. Confirm
with OK.
You can also access the PRINT menu
Note
by pressing the
button.
2 Select SUDOKU using the ꢀor ꢁbutton.
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Radio ad-hoc network
Network features
In an ad-hoc network, the devices communicate directly
with each other without passing through an access point.
The speed of communication across the whole radio
network is as fast as the weakest connection in the
network. The speed of communication is also dependent
on spatial distance between transmitter and receiver, as
well as the number of barriers, such as walls or ceilings.
You may connect your multifunction terminal to a wireless
network.
However, practical knowledge of your computer
configuration is required to set up a network.
You can connect your machine to a PC using a USB cable
or make a wireless connection (via radio) with a PC or
network.
Please note that in ad-hoc mode,
the WPA/WPA2 encryption method
is not available.
Important
If you have a WLAN adaptor, you
can incorporate your machine as a
network printer into a radio network.
This works only with an approved
adaptor that you can obtain from our
Important
ordering department. For further
information, contact
Type of radio network
A radio network or WLAN (Wireless Local Area Network)
is created when at least two computers, printers or other
peripheral devices communicate with each other in a
network via radio waves (high frequency waves). The
transmission of data in the radio network is based on the
standards 802.11b and 802.11g. According to how the
network is set up, it may be described as an infrastructure
network or an ad-hoc network.
Radio networks (WLAN)
Three steps are necessary to incorporate your machine
into a radio network (WLAN):
Beware, when you are using a
wireless connection, that certain
items of medical equipment,
1 Configure the network to your PC.
2 Set up the parameters for your machine so that it
sensitive or security systems may
be affected by the radio
can function in a network.
CAUTION
3 Having set up the parameters for your device,
install the Companion Suite Pro software onto your
PC with the necessary printer drivers.
transmissions of your device; in all
cases, please follow safety
guidelines closely.
Once the machine is incorporated into a WLAN network,
you can from your PC:
Radio infrastructure network
•
print documents on the multifunction machine from
your usual applications,
scan colour, grey scale or black and white documents
on your PC.
In an infrastructure network, several devices
communicate via a central access point (a gateway or
router). All data is sent to the access point (gateway or
router) from where it is re-distributed.
•
The PC and all other devices must
have their parameters set up to the
same network as the multifunction
machine. All the details needed for
setting up the device, such as the
network names (SSID), type of radio
network, encryption key, IP address
or subnetwork mask, must match
the specifications of the network.
Important
You will find these details on your
PC or on the Access Point.
To find out how to set up the
parameters for your PC, please
consult the users’ manual for your
WLAN adaptor. For large networks,
please seek the advice of your
network administrator.
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Configure your network
You can be sure of perfect
communication if you use an
approved adaptor in conjunction with
your PC.
We recommend that the settings of
your WLAN network should only be
changed by a person with a good
knowledge of the configuration of your
computer.
Note
Note
All of the latest printer drivers for the
approved adaptor may be found on
our website together with further
information:
Creating or rejoining a network
Before attempting to use a WLAN adaptor on your
machine, you must enter the parameters that will allow a
WLAN network to recognise your machine.
Connect your WLAN adaptor
Your machine belongs to a new generation of terminals
that you can incorporate into a WLAN network using a
WLAN USB key.
On your machine you will find simple instructions
that guide you step by step through the set-up of your
network. Just follow them!
Your machine’s network radio
adaptor transmits data using the
radio protocol IEEE 802.11g; it can
also be incorporated into an existing
IEEE 802.11b network.
ꢀ281 - SETUP / WLAN / CONFIG. ASS.
1 Type in ꢀ, select the menu SETUP using the keys
ꢀor ꢁand confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
When connecting to your machine,
only use the approved adaptor.
Other transmitting or receiving
3 Select CONFIG. ASS. using the keys ꢀor ꢁand
confirm with OK.
adaptors may damage your device.
Important
The machine searches for existing networks.
4 Select your existing network, or select NEW
NETWORK to create it, using the keys ꢀor ꢁand
confirm with OK.
Irrespective of whether you use your
machine in an infrastructure or ad-
hoc network, you must set up certain
network and security parameters
(for example, the Service-Set-ID
(SSID) and the encryption key).
These must match the network’s
specifications.
If you choose an existing network,
steps 5 and 6 (and possibly 7) are
carried out automatically.
Note
5 SSID appears on the screen, enter the name of
your network using the numerical keypad, pressing
the keys one after the other until you obtain the
name you want (32 characters maximum) and
confirm with OK.
1 Plug your WLAN USB key into the USB port of your
machine.
6 AD-HOC MODE or INFRA. MODE appear on the
screen. Go back to the beginning of the chapter
and make your choice.
Select one of these modes and confirm with OK.
-
If you choose AD-HOC mode, the sub-menu
CHANNEL appears, enter a figure between 1
and 13 (1 to 11 for the US) and confirm with OK.
7 Select your encryption method, OFF, WEP or
WPA, and confirm with OK:
Please note that in ad-hoc mode,
the WPA/WPA2 encryption method
is not available.
Important
-
-
If you choose WEP, enter the WEP key that you
are using on your network.
The WEP key number may be
configured in the menu: ꢀ29 -
SETUP / TECHNICALS / WEP KEYS
Note
NBR.
If you choose WPA, enter the WPA or WPA2
key that you are using on your network.
- 43 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
8 IP CONF.: MANU or IP CONF.: AUTO appear on
the screen.
3 Select PARAMETERS using the keys ꢀor ꢁand
confirm with OK.
If you choose to set up the system manually, go to
the next paragraph and enter the parameters
IP ADDRESS, SUBNET MASK and GATEWAY.
4 Select GATEWAY using the keys ꢀor ꢁand
confirm with OK.
5 The number of your gateway will appear in the
format 000.000.000.000. Enter the new gateway
for your machine in the format displayed and
confirm with OK.
9 At the end of this procedure, you return to the main
menu of CONFIG. ASS.
10 Exit this menu by pressing the
key.
6 Exit this menu by pressing the
key.
Once the network has been set up, the LED of the WLAN
USB key should be on.
ꢀ2825 - SETUP /WLAN / PARAMETERS / SSID
Referring to or changing your
network parameters
1 Type in ꢀ, select the menu SETUP using the keys
ꢀor ꢁand confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
Each of the parameters of your network may be changed
as your network develops.
with OK.
3 Select PARAMETERS using the keys ꢀor ꢁand
ꢀ2822 - SETUP / WLAN / PARAMETERS / IP
confirm with OK.
ADDRESS
4 Select SSID using the keys ꢀor ꢁand confirm
with OK.
1 Type in ꢀ, select the menu SETUP using the keys
5 The name of your network will appear on the
screen. Enter the new name of your network and
confirm with OK.
ꢀor ꢁand confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
6 Exit this menu by pressing the
key.
3 Select PARAMETERS using the keys ꢀor ꢁand
confirm with OK.
4 Select IP ADDRESS using the keys ꢀor ꢁand
ꢀ2826 - SETUP / WLAN / PARAMETERS / MODE
confirm with OK.
1 Type in ꢀ, select the menu SETUP using the keys
5 The number of your IP address will appear in the
format 000.000.000.000. Enter the new IP address
for your machine in the format displayed and
confirm with OK.
ꢀor ꢁand confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
6 Exit this menu by pressing the
key.
3 Select PARAMETERS using the keys ꢀor ꢁand
confirm with OK.
4 Select MODE using the keys ꢀor ꢁand confirm
ꢀ2823 - SETUP / WLAN / PARAMETERS / SUBNET
with OK.
MASK
5 The symbol >>, tells you that your network is in
active mode.
1 Type in ꢀ, select the menu SETUP using the keys
6 Select one of the modes and confirm with OK.
ꢀor ꢁand confirm with OK.
-
If you choose the AD-HOC MODE, the sub-
menu CHANNEL will appear; enter a number
between 1 and 13 (1 to 11 for the US) and
confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
3 Select PARAMETERS using the keys ꢀor ꢁand
confirm with OK.
4 Select SUBNET MASK using the keys ꢀor ꢁand
7 Exit this menu by pressing the
key.
confirm with OK.
In an AD-HOC network, the devices
communicate directly with each
other without passing through an
access point. The speed of
5 The number of your subnet mask will appear in the
format 000.000.000.000. Enter the new submask
of your machine in the format displayed and
confirm with OK.
communication across the whole
AD-HOC radio network is as fast as
the weakest connection in the
network. The speed of
communication is also dependent on
spatial distance between transmitter
and receiver, as well as the number
of barriers, such as walls or ceilings.
6 Exit this menu by pressing the
key.
Important
ꢀ2824 - SETUP / WLAN / PARAMETERS / GATEWAY
1 Type in ꢀ, select the menu SETUP using the keys
ꢀor ꢁand confirm with OK.
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
- 44 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
ꢀ2827 - SETUP / WLAN / PARAMETERS / SECURITY Once your connection has been set up, you must install
the network printer driver on your PC so that you can print
This parameter allows you to make your network secure your documents.
by setting the encryption method to use in your WLAN Refer to the paragraph Software installation, page 52.
network.
An example of how an AD-HOC network
1 Type in ꢀ, select the menu SETUP using the keys
may be set up
ꢀor ꢁand confirm with OK.
An example of how to configure an Ad-hoc network
without security protection using the following
parameters:
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
3 Select PARAMETERS using the keys ꢀor ꢁand
confirm with OK.
•
•
•
•
•
•
•
•
network name: "house"
4 Select SECURITY using the keys ꢀor ꢁand
radio type: "ad-hoc"
confirm with OK.
channel: "1"
5 Choose WEP, WPA or OFF and confirm with OK.
PC’s IP address: "169.254.0.1"
PC’s subnetwork mask: "255.255.0.0"
PC’s gateway: "0.0.0.0"
-
If you choose WEP, enter a password:
- In a 64 bit security configuration, the password
must contain five characters exactly.
- In a 128 bit security configuration, the
password must contain 13 characters exactly.
IP address of the multifunction machine: "169.254.0.2"
subnetwork mask of the multifunction machine:
"255.255.0.0"
You may also enter the password
using the hexadecimal system, if this
is the case:
•
multifunction machine’s gateway: "0.0.0.0"
- For a 64 bit security configuration,
the password must contain exactly
10 hexadecimal characters.
Setting up a multifunction machine
Note
1 Plug the WLAN USB key into the USB connector of
- For a 128 bit security configuration,
the password must contain exactly
26 hexadecimal characters.
the multifunction machine.
2 Type in ꢀ, select the menu SETUP using the keys
ꢀor ꢁand confirm with OK.
3 Select WLAN using the keys ꢀor ꢁand confirm
-
If you choose WPA, enter a WPA or WPA2
password (min. 8 characters to 63 characters
max.).
with OK.
4 Select CONFIG. ASS. using the keys ꢀor ꢁand
confirm with OK.
The password can contain alphanumerical
characters - numbers and letters - and any other
symbol available on the keypad. The only
invalid character is "€" (euro currency sign).
5 Select NEW NETWORK using the keys ꢀor ꢁ
and confirm with OK.
6 SSID appears on the screen, enter "house" using
the numerical keypad and confirm with OK.
6 Exit this menu by pressing the
key.
7 Select the mode AD-HOC MODE and confirm
with OK.
8 Enter "1" in the field CHANNEL and confirm
ꢀ2828 - SETUP / WLAN / PARAMETERS /
with OK.
HOSTNAME
9 Select OFF and confirm with OK.
10 Select IP CONF.: MANU and confirm with OK.
The machine name allows you to identify your machine on
the network via a PC (for example with the name "PRINT-
NETWORK-1").
11 Enter "169.254.0.2" in the field IP ADDRESS and
confirm with OK.
12 Enter "255.255.0.0" in the field SUBNET MASK
1 Type in ꢀ, select the menu SETUP using the keys
and confirm with OK.
ꢀor ꢁand confirm with OK.
13 Enter "0.0.0.0" in the field GATEWAY and confirm
2 Select WLAN using the keys ꢀor ꢁand confirm
with OK.
with OK.
14 At the end of this process, you return to the main
3 Select PARAMETERS using the keys ꢀor ꢁand
menu of ASS. CONFIG.
confirm with OK.
15 Exit this menu by pressing the
key.
4 Select HOSTNAME using the keys ꢀor ꢁand
confirm with OK.
Once the network has been set up, the LED of the WLAN
USB key should be on.
5 Type in the desired name (15 characters
maximum) and confirm with OK.
You must now set up the PC.
6 Exit this menu by pressing the
key.
- 45 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Setting up the PC
For this section, refer to the instructions supplied by the
manufacturer of the WLAN USB key to help you to find
and join the "house" network.
1 You may need to install the software for the WLAN
USB key on the PC, if this has not already been
done.
2 Plug WLAN USB key into a USB port on the PC.
3 Use the software of the WLAN USB key to detect
the network.
4 Join the network "house" once this has been
detected.
5 Now set up the WLAN network connection of your
PC.
To guide you through this stage, refer
to the paragraph “Setting the
parameters for a connection” in the
Note
manufacturer’s instructions.
To do this, you must configure the element
Protocol Internet (TCP/IP) for the WLAN
connection that has been created. If this element is
set up in such a way as to obtain an IP address
automatically, you must change it to manual mode
to set up the TCP/IP address ("169.254.0.1" in our
example), the subnet mask ("255.255.0.0" in our
example) and the default gateway ("0.0.0.0" in our
example).
6 Enter OK.
- 46 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Select LIST with the ꢀor ꢁbuttons and confirm
with OK.
USB memory key
4 The list is shown in a table with the following
You can connect a USB memory Key on the front side of
your machine. The files stored in TXT, TIFF and JPEG
formats will be analysed and you will be able to use the
following actions:
information:
-
the analysed files are indexed in an incremental
1 by 1 order,
-
-
-
the files name with their extension,
the date of the files last save,
the files size in Kbytes.
- print the stored files contained in your USB memory
1
key ,
- delete the files contained in your USB memory key,
- run an analysis on the contents of the inserted USB
memory key,
Print the files located in the key
- digitalise a document on your USB memory key,
To print the files located in the key:
ꢀ01 - MEDIA / PRINT DOC. / FILE
1 Insert the USB memory key on the front side of the
machine respecting the insertion way.
Use of the USB memory key
MEDIA ANALYSIS appears on the screen.
Always respect the insertion way
when you connect a USB memory
key to the machine.
Do not disconnect your USB memory
key while the machine is reading its
contents or writing contents.
2 Select PRINT DOC. with the ꢀor ꢁbuttons and
confirm with OK.
Important
3 Select FILE with the ꢀor ꢁbuttons and confirm
with OK.
4 You have three possibilities to print your files:
-
ALL, to print all the files located in the USB
memory key.
Select ALL with the ꢀor ꢁbuttons and
confirm with OK. The printing is started
automatically.
-
SERIES, to print a series of files located in the
USB memory key.
Select SERIES with the ꢀor ꢁbuttons and
confirm with OK.
FIRST FILE and the first indexed file appears
on the screen. Select with the ꢀor ꢁbuttons
the first file of the series to print and confirm
with OK. A star (*) appears on the left side of the
file.
LAST FILE appears on the screen. Select with
the ꢀor ꢁbuttons the last file of the series to
print and confirm with OK.
Print your documents
Press the
button.
COPIES NUMBER appears on the screen,
enter the desired number of copies with the
numerical keypad and confirm with OK.
Select the printing format (for JPEG files): A4 or
LETTER (depending on model), or PHOTO and
confirm with OK.
The printing is not possible on A5
Important
(or Statement) paper format.
You can print the stored files or a list of the files located in
the USB memory key.
Select the printing format: THICK or NORMAL
and confirm with OK to start printing.
Print the list of files located in the key
To print the list of files located in the key:
-
SELECTION, to print one or several files
located in the USB memory key.
Select with the ꢀor ꢁbuttons the file to print
and confirm with OK. A star (*) appears on the
left side of the file.
ꢀ01 - MEDIA / PRINT DOC. / LIST
1 Insert the USB memory key on the front side of the
machine respecting the insertion way.
Repeat this step for each file you want to print.
MEDIA ANALYSIS appears on the screen.
Press the
button.
2 Select PRINT DOC. with the ꢀor ꢁbuttons and
COPIES NUMBER appears on the screen,
enter the desired number of copies with the
numerical keypad and confirm with OK.
confirm with OK.
1. It may be possible that some TIFF files of your USB
memory key cannot be printed due to data format limitation.
- 47 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Select the printing format (for JPEG files): A4 or
LETTER (depending on model), or PHOTO and
confirm with OK.
Select the printing format: THICK or NORMAL
and confirm with OK to start printing.
Analyse the USB memory key content
After a period of inactivity, your machine will return to the
main menu. To view the USB memory key again please
proceed as follows:
ꢀ07 - MEDIA / MEDIA ANALYSIS
5 Quit this menu by pressing the
button.
1 Press ꢀ, enter 07 using the keypad.
Delete your files located in the key
You can delete files located in your USB memory key.
ꢀ06 - MEDIA / DELETE / MANUAL
2 The USB memory key analysis is started.
3 You can print or delete the detected files located in
your USB memory key. Refer to the previous
chapters.
1 Insert the USB memory key on the front side of the
machine respecting the insertion way.
Save a document on a USB memory
key
MEDIA ANALYSIS appears on the screen.
2 Select DELETE with the ꢀor ꢁbuttons and
This function allows you to digitise and save a document
directly in the folder MFPrinter Laser Pro LL2\SCAN on a
USB memory key. The folder MFPrinter Laser Pro
LL2\SCAN is created by the application.
confirm with OK.
3 Select MANUAL with the ꢀor ꢁbuttons and
confirm with OK.
4 You have three possibilities to delete your files:
-
ALL, to delete all the files located in the USB
memory key.
Select ALL with the ꢀor ꢁbuttons and
confirm with OK.
Before digitalising a document,
make sure that your USB memory
key has sufficient disk space. If not,
you can delete manually the files,
Important
You come back to the previous menu.
-
SERIES, to delete a series of files located in the
USB memory key.
Select SERIES with the ꢀor ꢁbuttons and
confirm with OK.
1 Place the document to be copied face down on the
glass.
FIRST FILE and the first indexed file appears
on the screen. Select with the ꢀor ꢁbuttons
the first file of the series to delete and confirm
with OK. A star (*) appears on the left of the file.
LAST FILE appears on the screen, select with
the ꢀor ꢁbuttons the last file of the series to
delete and confirm with OK. A star (*) appears
on the left side of the file.
2 Insert the USB memory key on the front side of the
machine respecting the insertion way.
The USB memory key analysis is started.
When the analysis is finished, the MEDIA menu is
displayed.
3 Select SCAN TO with the ꢀor ꢁbuttons then
confirm with the OK button.
Press the
button.
You can also access this function in
two other ways:
You come back to the previous menu.
-
SELECTION, to delete only one or several files
located in the USB memory key.
Select with the ꢀor ꢁbuttons the file to delete
and confirm with OK. A star (*) appears on the
left side of the file.
•
•
by pressing the
button then
Important
by selecting SCAN-TO-MEDIA.
by pressing the ꢀbutton from the
screen saver then by typing 03 on
the numerical keypad.
Repeat this step for each file you want to delete.
Press the
button.
4 Choose between B&W SCAN or COLOUR SCAN
You come back to the previous menu.
with the ꢀor ꢁbuttons and confirm with OK.
5 With the alphanumerical keypad, give a name to
the scan file (up to 20 characters) and confirm
with OK.
5 Quit this menu by pressing the
button.
6 Choose the scan format between IMAGE and PDF,
and confirm to start the scan and the recording of
the document.
IMAGE allows to have the same kind of file as a
photo. PDF is a format for the digital documents
creation.
- 48 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
With the IMAGE format, if you have
selected:
•
•
BLACK&WHITE, the picture will
be saved in TIFF format.
COLOUR, the picture will be
saved in JPEG format.
You can choose the image resolution
that will be digitized to the USB
memory key; the default resolution is
AUTO.
Important
Press the
button several times
and select the resolution you require:
•
•
Scanning in BLACK&WHITE:
-
-
icon: text resolution.
icon: photo resolution.
- no icon: auto resolution.
Scanning in COLOUR:
-
icon: text resolution.
- no icon: auto resolution.
The beginning button
immediately starts the scan
and sends a file to the support with the parameters
defined in the analysis format.
- 49 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
•
to the rear USB port
Telephony (option)
The machine lets you connect a USB-DECT base to one
of the USB ports of the device and register DECT
handsets to this base.
You can then make and receive calls with the registered
DECT handsets using the machine telephone line
(standard cordless telephone use).
The telephony feature is an optional
working only with a specific USB
DECT dongle that you can obtain from
your retailer.
Note
You will find further information on our
website:
You can now make and receive calls with the handset
supplied with the DECT base. As the telephone line is
now used for both communication (fax, SMS) and
telephony features, you may need to adjust the machine
Because the machine and the DECT base use the same
telephone line, please consider the following points:
•
the telephony feature only supports voice calls. SMS
service is not available on registered handsets, as well
as Caller Identification Display (CID) and notification,
even if DECT devices used support this function.
Registering DECT handsets
By default, the USB-DECT base comes with one
registered handset. To register additional handsets (GAP
compatible) to the base, you will need to put both the base
and the handset in registration mode.
•
when a handset is used, the line is busy. As a result,
the machine cannot perform fax or SMS
communication operations. Sending and receiving
resumes when the line is freed.
•
•
print and scan operations may take slightly more time
when performed during a DECT communication.
This menu is available only if the
USB-DECT base is connected to the
machine.
Important
the machine and registered handset(s) cannot share
directories.
To register a handset to the DECT base:
Connecting the USB-DECT base
ꢀ 891 - ADVANCED FCT / DECT / REGISTER
Connect your DECT base to one of the USB ports of the
machine:
1 Put the handset in registration mode.
To know the exact registration
procedure of the handset, please refer
to its documentation.
•
to the front USB port
Note
2 On the machine, press ꢀ, enter 89 using the
keypad and confirm with OK.
3 Select REGISTER using the ꢀor ꢁ button and
confirm with OK.
The machine starts searching for the handset.
During the registration process (up to one minute), the
LCD screen displays HANDSET REGISTRATION. The
message disappears once registration is complete.
If the registration process fails (for
example, the handset left the
registration mode too soon), the
machine emits a 3-beep signal. In
Important
this case, repeat the procedure from
step 1.
- 50 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
2 Select UNREGISTER using the ꢀor ꢁ button and
confirm with OK.
Customising telephony settings
The LCD screen displays the list of handsets
registered to the DECT base.
This function lets you set the handset ringing time upon
call reception.
3 Select the handset to unregister using the ꢀor ꢁ
This parameter, used to define for how long the
handset(s) rings before terminating a call, is by default set
to 30 seconds.
button and confirm with OK.
4 Confirm with OK.
5 To exit this menu, press
.
This menu is available only if the
USB-DECT base is connected to the
machine.
Important
ꢀ 893 - ADVANCED FCT / DECT / RINGING TIME
1 Press ꢀ, enter 89 using the keypad. Confirm
with OK.
2 Select RINGING TIME using the ꢀor ꢁ button
and confirm with OK.
3 Enter the desired time in seconds (15 to 60) using
the numerical keypad.
4 Confirm with OK.
5 To exit this menu, press
.
Modifying the flash duration (R key)
If you connect your machine to a private automatic branch
exchange or use it in a foreign country, you may need to
modify the flash duration in order to use your telephone
correctly with regard to the following functionalities:
outgoing 2nd call, incoming 2nd call, conference call.
Contact your administrator, who will supply the
appropriate time period, and proceed to the new settings.
ꢀ 894 - ADVANCED FCT / DECT / FLASH TIME
1 Press ꢀ, enter 89 using the keypad. Confirm
with OK.
2 Select FLASH TIME using the ꢀor ꢁ button and
confirm with OK.
3 Select the desired time in milliseconds (80 to 600)
using the ꢀor ꢁ button.
4 Confirm with OK.
5 To exit this menu, press
.
Unregistering DECT handset
This function is used to unregister a handset from the
DECT base. You will no longer be able to make or receive
calls with a handset once you unregister it.
This menu is available only if the
USB-DECT base is connected to the
machine.
Important
ꢀ 892 - ADVANCED FCT / DECT / UNREGISTER
1 Press ꢀ, enter 89 using the keypad. Confirm
with OK.
- 51 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Software installation
PC Features
This section describes the following installation
procedures:
Introduction
•
•
full installation of the Companion Suite Pro software,
installation of the drivers only.
The Companion Suite Pro software allows the connection
of a personal computer with a compatible multifunction
machine.
Installing the full software package
Turn your PC on. Open an account session with the
administration rights.
From the PC, you can:
•
•
•
manage the multifunction machine, allowing you to set
it up according to your needs,
1 Open the CD-ROM drive, insert the installation CD-
print your documents on the multifunction machine
from your usual applications,
ROM and close the drive.
2 An installation procedure is automatically run (Auto
run). If it does not, double-click on setup.exe at the
CD-ROM's root.
scan colour, grey scale or black and white documents
and edit them on your PC, or process them into text
using the character recognition software (OCR).
3 A screen titled COMPANION SUITE PRO LL2
appears. This screen allows you to install and
uninstall the software, access the product's user
guides or browse the CD-ROM contents.
Configuration requirements
The minimum configuration requirements for your
personal computer are:
4 Place your cursor on INSTALL PRODUCTS and
confirm with left-click of the mouse.
Supported operating systems:
•
•
Windows 2000 with at least Service Pack 4,
Windows XP x86 (Home and Pro) with at least Service
Pack 1,
•
•
Windows 2003 server for printing driver only,
Windows Vista.
Processor:
•
•
•
800 MHz for Windows 2000,
1 GHz for Windows XP x86 (Home and Pro),
1 GHz for Windows Vista.
5 The Products Installation screen appears.
Place your cursor on ALL PRODUCTS and confirm by
left-click with the mouse.
A CD-ROM drive
A free USB port
The full installation copies on your
hard disk the software required for the
good execution of the Companion
Suite Pro kit, which is:
- Companion Suite Pro (machine
management software, printer drivers,
scanner, ...),
600 Mbytes of available disk space for the installation
RAM memory:
•
•
128 Mbytes minimum for Windows 2000,
192 Mbytes minimum for Windows XP x86 (Home and
Pro),
- Adobe Acrobat Reader,
- PaperPort.
•
1 GByte for Windows Vista.
Note
You may already be the owner of a
version of the software available in the
installation CD-ROM.
In this case use the CUSTOMIZED
installation, select the software that
you want to install on your hard drive
and confirm your choice.
- 52 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
9 The final installation is ready to be executed. Click
on the INSTALL button.
6 The welcome screen appears. Click on the NEXT
button to launch the installation of the Companion
Suite Pro in your PC.
The following screen appears to indicate the
progression of the installation.
10 Click on OK to finish the installation.
7 To continue, you need to accept the proposed
license agreement.
Your Companion Suite Pro kit is successfully installed on
your PC.
You can now connect your multifunction machine, refer to
You can start the multifunction machine's management
software from the menu START > ALL PROGRAMS
> COMPANION SUITE > COMPANION SUITE PRO LL2
> COMPANION DIRECTOR or by clicking on the icon
COMPANION - DIRECTOR located on your desktop.
8 Click on the NEXT button.
- 53 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
6 Place your cursor on COMPANION SUITE PRO LL2
Installing drivers only
and confirm with left-click of the mouse.
This section describes the following installation
procedures:
•
•
installation of drivers using the Companion Suite Pro
software,
manual installation of drivers.
Installing the drivers using the Companion Suite
Pro software
Turn your PC on. Open an account session with the
administration rights.
7 The welcome screen appears. Click on the NEXT
button to launch the installation of the Companion
Suite Pro kit on your PC.
1 Open the CD-ROM drive, insert the installation CD-
ROM and close the drive.
2 An installation procedure is automatically run (Auto
run). If it does not, double-click on setup.exe at the
CD-ROM's root.
3 A screen titled COMPANION SUITE PRO LL2
appears. This screen allows you to install and
uninstall the software, access the product's user
guides or browse the CD-ROM contents.
4 Place your cursor on INSTALL PRODUCTS and
confirm with left-click of the mouse.
8 To continue, you need to accept the proposed
license agreement.
5 The Products Installation screen appears.
Place your cursor on CUSTOMIZED and confirm by
left-click with the mouse.
9 Click on the NEXT button.
10 Select INSTALL DRIVERS in the list and click on the
NEXT button.
- 54 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
11 Select the destination folder for installation and
Installing the drivers manually
click on the NEXT button.
You can install the printer and scan drivers manually
without running any setup software.
This installation mode is only possible
on Windows 2000, XP and Vista.
Note
1 Locate your USB cable connectors and connect as
shown below on the picture.
12 The final installation is ready to be executed. Click
on the INSTALL button.
2 Power on your multifunction machine.
The PC detects the device.
3 Click on LOCATE AND INSTALL DRIVER SOFTWARE
(RECOMMENDED).
13 A screen informs you of the installation progress.
The following screen appears:
14 Click on OK to finish the installation.
The Companion Suite Pro software is now installed on
your PC.
4 Open the CD-ROM drive, insert the installation CD-
ROM and close the drive.
The drivers are detected automatically.
You can now connect your multifunction machine, refer to
- 55 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
5 Select LASER PRO LL2 in the list and click on NEXT.
2 Power on your multifunction machine.
The PC detects the device and the drivers are
automatically installed.
3 Once the installation is finished, a message
indicates that the drivers are installed correctly.
You can now use the multifunction machine to print or
scan your documents.
6 A screen informs you that the drivers have been
installed. Click on the CLOSE button.
You can now use the multifunction machine to print or
scan your documents.
Connections
Make sure that your multifunction machine is powered off.
The connection between the PC and the machine
requires a USB 2.0 shielded cable no more than 3 meters
long.
It is recommended to install the
Companion Suite Pro software first
and then to connect the USB cable
If you connect the USB cable before
installing the Companion Suite Pro
software the recognition system
(plug and play) identifies
Important
automatically that new hardware has
been added. To start your machine
drivers installation, refer to
instructions on screen. When you
use this procedure, only printing and
scanning functions are activated.
1 Locate your USB cable connectors and connect as
shown below on the picture.
- 56 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Multifunction Terminal's Supervision Companion Monitor
The software that you have installed contains two
multifunction machine management applications,
Graphical presentation
COMPANION DIRECTOR and COMPANION MONITOR, which
allow you to:
Run the application by clicking on the COMPANION
MONITOR icon located on your desktop or from the menu
START >ALLPROGRAMS >COMPANION SUITE >COMPANION
SUITE PRO LL2 > COMPANION MONITOR.
•
check whether the multifunction machine is connected
to your PC,
•
•
monitor the multifunction machine activities,
monitor the status of the multifunction machine
consumables from the PC,
•
quickly access the graphic editor applications.
To manage the multifunction machine, run the
Companion Director application by clicking on the icon
located on your desktop or from the menu START
>ALLPROGRAMS > COMPANION SUITE >COMPANION SUITE
PRO LL2 > COMPANION DIRECTOR.
Checking the connection between the PC
and the multifunction machine
To check if the connection between the devices is good,
run the COMPANION MONITOR software from the icon
located on the desktop and check that the same
information is displayed on the multifunction machine.
From this screen you can monitor the information or
configure your multifunction machine from the tabs:
•
•
•
DEVICE SELECTION: Displays the list of devices
managed by the PC.
Companion Director
COMPANION: Presents the multifunction machine
screen (USB connection only).
This graphical Interface allows you to run the utilities and
the software to manage your multifunction machine.
CONSUMABLES: Displays the consumables status.
Graphical presentation
Device management
Run the application by clicking on the COMPANION
DIRECTOR icon located on your desktop or from the menu
START >ALLPROGRAMS > COMPANION SUITE >COMPANION
SUITE PRO LL2 > COMPANION DIRECTOR.
This tab shows the list of devices managed by the PC.
Selecting the current device
Only one device at a time may be connected to the PC.
The current device may be selected by clicking on the
radio button corresponding to the device.
Utilities and applications activation
The Companion Suite Pro graphical interface allows you
to run the following utilities and software:
•
•
get HELP from the current documentation,
run the PAPERPORT software (Doc Manager).
To run a software or utility contained in the Companion
Suite Pro kit, place the cursor on it and left-click with the
mouse.
- 57 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Select the desired scan RESOLUTION in the drop-
Status of the connection
down menu.
The status of the connection between the current device
and the PC is indicated by a colour. The following table
defines the possible states of the connection.
Colour
Yellow
State
Connection in progress.
Green
Red
Connection established.
The PC cannot connect to the device.
Check the USB connection.
Device parameters
4 Click OK to confirm the new parameters.
1 Select a device by clicking on its line in the list and
click on PROPERTIES to configure the scanning
parameters to be applied for this device when you
use the SCAN TO function.
Removing a device
1 Select the device from the list and click the minus
sign or REMOVE button.
2 To confirm the removal of the device, click YES. To
cancel the removal, click NO.
The device is no longer displayed in the list.
Display the consumable status
2 Select the desired scan MODE in the drop-down
The following information will be available from the
CONSUMABLES tab:
menu.
•
•
•
•
current consumables status,
number of printed pages,
number of scanned pages,
number of sent and received pages.
- 58 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Companion Suite Pro functionalities
If the PaperPort software is not
installed on your hard drive, the
scanned picture will appear on your
desktop in TIFF format.
Document analysis
Note
The document analysis can be carried out in two ways:
•
either by the SCAN TO function (application accessible
from the Companion Director window or from the
SCAN button on the machine),
To scan a document from PaperPort:
1 Click on FILE > SCAN.
•
or directly from a standard compatible application.
2 Select the desired scanner, document feeder or
flatbed.
Analysis with Scan To
Run the application by clicking on the COMPANION
DIRECTOR icon located on your desktop or from the menu
START >ALL PROGRAMS > COMPANION SUITE >
COMPANION SUITE PRO LL2 > COMPANION DIRECTOR.
3 Customise the advanced properties of the
digitisation by clicking on the ADJUST THE QUALITY
OF THE SCANNED PICTURE link.
4 Adjust the desired parameters and click on the OK
button.
1 Click on the SCAN TO graphical image or press the
SCAN button on your machine and select SCAN-
TO-PC.
2 You can follow the ongoing digitisation on a screen.
5 Click on the SCAN button, you can follow the
3 At the end of the digitisation, the scanned picture
ongoing digitisation on a screen.
appears in the PaperPort window.
Character recognition software (OCR)
The character recognition function allows to create a
usable data file for desktop applications from a hardcopy
document or from a picture.
The character recognition only works for printed
characters, such as printer outputs or typed text.
Nevertheless you can request for a handwritten text block
to be kept intact (a signature for instance) by outlining it.
Given your machine environment and the character
recognition from your machine, the OCR is done with a
Drag&drop of a document from the PaperPort to the
Notepad icon
.
- 59 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
3 Check the Duplex box and choose among the two
binding modes:
For more details about the usage of
this software, check the online help of
the product.
Note
Binding mode
Long sides
Printing
Printing
You have the possibility to print your documents via the
USB connection or the WLAN connection.
During the installation of the Companion Suite Pro
software, the LASER PRO LL2 printer driver will be
installed automatically onto your PC.
Short sides
Printing on the multifunction machine
Printing a document on the multifunction machine from
your PC is like printing a document in Windows.
4 Click on the OK button to begin printing.
5 The machine prints the odd pages (from the higher
1 Use the PRINT command from the FILE menu of the
odd page to page 1) and the LCD screen displays:
currently open application on the screen.
** PRINTING **
** PC **
2 Select the LASER PRO LL2 printer.
Printing in duplex mode with the multifunction
machine
6 Once the odd pages are printed, the LCD screen
displays the message **PUT THE PRINTED SHEETS IN
THE PAPER TRAY WITH THE PRINTED SIDE VISIBLE...:
The machine offers the possibility to print a document in
manual duplex mode from your PC.
** PUT THE PRIN
... AND PRESS <OK>
In manual duplex, the print
quality and paper transport are
not guaranteed.
The PC generates and prints a page
explaining how to reload the sheets
for a duplex job. Read this page
carefully and place it back with the
other sheets.
it is very important that you return
the explanation sheet to the paper
tray to continue printing correctly.
- If some trouble occurred to the
paper during the print of the first
side, such as wrinkle, dog ear or
staple, do not use the paper for
Important
CAUTION
manual duplex.
- When you load paper, please
true up the end of paper on a flat
surface.
7 Place the sheets in the paper tray as indicated on
the explanation page and below.
The following illustrations describe the necessary
operations depending on the selected binding
mode:
For best results, we recommend
that you use 80 g/m² A4 paper or
20 lbs/m² Letter paper.
To print a document in manual duplex mode:
The duplex printing mode is
available only in a paper format
managed by the paper tray.
The manual tray cannot be used to
print in duplex mode.
Important
1 Use the PRINT command from the FILE menu of the
currently open application on the screen.
2 Select the LASER PRO LL2 printer.
- 60 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
•
Long sides
Address book
The address book enables you to store the numbers of
the contacts you call the most frequently. The purpose of
this function is to facilitate dialling your contact’s number
when you want to send an SMS or fax. If you want, you
can print the list of numbers stored in the address book.
You also have the possibility of creating groups of
contacts from the address book. Like this, you can group
together all contacts from, for example, a given company
or the same service, etc, to which you frequently send
common documents.
Add a contact to the terminal address book
1 Click on the link ADDRESS BOOK of the window
COMPANION DIRECTOR.
The address book is displayed on the screen.
•
Short sides
2 Select the terminal address book.
3 Click on NEW and select CONTACT in the displayed
menu.
The input window for the contact data is displayed.
8 Press OK on the command panel to resume
printing.
9 Even pages are printed on the other side of the
sheets. Once all pages are printed, remove the
explanation sheet.
4 Enter the contact name as well as the fax or GSM
telephone number, the fax transmission rate with
this person and the associated quick dial key. Click
on OK.
The new contact is added to the list.
If a paper jam or a paper format
error occurs, the job is cancelled.
You must then resubmit the print job.
Important
Add a group to the terminal address book
1 Click the link ADDRESS BOOK of the window
COMPANION DIRECTOR.
- 61 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
2 Select the terminal address book.
Modify the information related to a contact
3 Click NEW and select GROUP in the displayed
1 Select the contact whose data you want to modify,
menu.
using the mouse.
2 Click on PROPERTIES.
3 Make the necessary changes in the window
ADDRESS BOOK.
4 Click on OK.
Modify a group
1 Select the group in the address book list.
2 Click on PROPERTIES.
3 Make the necessary changes.
4 Click on OK.
Delete a contact or a group from the address
book
4 Enter the name of the group. The group may
consist of contacts from the address book or new
contacts.
1 Select the name of the contact or the name of the
group you want to delete, using the mouse.
2 Click on DELETE.
1st case: group members are from the address
book.
Click SELECT THE MEMBERS.
When a contact is deleted from the
address book, it is automatically
deleted from any group in which it
Important
The selection window is displayed.
may be included.
Print the address book
1 Click on PRINT.
The list of the address book is printed on the
terminal (if no contact is selected).
Import or export an address book
Save / Export your address book
This operation lets you save your address book to a file in
EAB format.
Select a contact or a group in the zone ADDRESS
BOOK, click on
you can also double click on it).
Click on OK.
(to add a contact to the group
1 Select EXPORT in the menu FILE of the window
ADDRESS BOOK.
2 Enter the name of the file and select the destination
directory, then click on SAVE.
2nd case: adding new contacts.
Click on NEW then add the personal data of the new
contact, as in the procedure for adding a contact.
Import an address book
Importing an address book makes it possible to exchange
address book entries between two devices without having
to enter contacts one by one manually. Address books
can be imported from files in EAB format. EAB files are
automatically generated during export.
5 As soon as the group is complete, click on OK.
The new group is added to the list.
Manage the address book
When you are working in the address book, you can
perform different operations:
The whole address book will be
replaced by the imported address
book.
Important
•
•
•
print a list of contacts in your address book,
delete a contact or a group in your address book,
search for a contact or a group of contacts in the
address book using the first letters of the name,
1 Select IMPORT in the menu FILE of the window
ADDRESS BOOK.
•
check the datasheet of a contact or a group in order to
modify it.
2 Select the file to import, click on OPEN.
- 62 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Send a fax
Fax communications
The fax communication enables you to:
Send a fax from the hard disk or the terminal
•
send documents as faxes from one of the scanners of
your terminal, from the hard disk or from the screen of
your PC,
1 Click the icon
of the window COMPANION
DIRECTOR.
2 Click NEW then click FAX.
•
•
receive fax documents,
monitor communications through various services: the
inbox, the outbox, the sent items, the outbox log and
the inbox log.
Parameters are available to modify the way your terminal
works with regard to fax communications. You can modify
these parameters to adapt the fax communications to
your requirements. For this procedure, refer to paragraph
Presentation of the Fax window
3 In the zone SOURCES, select SCANNER if your
document is in paper format or MEMORY if the
document is a computer file located on your hard
disk (this file must be in TIFF or FAX format).
4 To send your fax to a contact, enter his/her number
in the field RECIPIENTS and click on
or select a
contact (or group) from one of the address books in
the field ADDRESS BOOK and click on the button
.
Repeat this operation as many times as necessary
(use the button
of contacts).
to delete a contact from the list
5 If necessary, adjust the advanced options (send
later and resolution) in the tab ADVANCED OPTIONS.
Item
1
Action
Create a new fax to send.
Delete a fax using one of the fax manager
directories. Except for directories SENT
LOG and RECEPTION LOG for which the
effect of this command is to delete the
entire log
2
Print a fax from one of the Fax manager
directories.
3
4
5
Display a fax with the Viewer.
Access to the address book.
6 To add a cover page, select the tab COVER PAGE
then click the box WITH THE COVER PAGE. Select
the cover page you want to add from the drop-down
menu, or create a new one. For more information,
Stop fax sending (only enabled for the
outbox).
6
7
7 Click OK to send your fax to all contacts in your list
Display all faxes in the selected directory
in the Fax manager.
of contacts.
Your send request can then be checked, if necessary, in
the outbox.
8
9
Fax preview.
Fax manager directories.
- 63 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Send a fax from an application
Receive a fax
This method is used to directly send a document you have
created using a desktop software without printing it
beforehand.
The window Companion Manager and Companion
Director show, using different messages, the reception of
a fax. The icon
is displayed at the bottom of the
1 From your desktop software, select FILE > PRINT.
window Companion Manager and the icon
appears
in the task bar.
You can automatically print faxes on reception. To do this,
Follow-up of fax communications
Follow-up of fax communications is by means of:
•
•
•
•
•
an outbox,
an inbox,
2 Select the printer COMPANION SUITE PRO LL2 FAX
and click OK.
a sent item memory,
an outbox log,
an inbox log.
The fax window is displayed.
These services enable you to always know exactly what
communications are taking place on the terminal, whether
sending or receiving.
The outbox and inbox logs are automatically printed when
their contents fill a page. After automatic printout, the
terminal creates a new log.
The outbox
In the fax outbox, there are the following:
•
•
•
the requests being sent,
the send later requests,
the requests for which one or more send attempts
have already been made, and which will soon be
redialed,
3 To send your fax to a contact, enter his/her number
in the field RECIPIENTS and click on
contact (or a group) from one of the address books
in the field ADDRESS BOOK and click the button
Repeat this operation as many times as necessary
or select a
•
the rejected requests (calls not put through).
.
(use the button
of contacts).
to delete a contact from the list
4 If necessary, adjust the advanced options (send
later and resolution) in the tab ADVANCED OPTIONS.
5 To add a cover page, select the tab COVER PAGE
then click the box WITH THE COVER PAGE. Select
the cover page you want to add from the drop-down
menu, or create a new one. For more information,
6 Click OK to send your fax to all contacts in your list
of contacts.
Your send request can then be checked, if necessary, in
the outbox.
The requests are classed in the order in which they are
executed.
The rejected requests are filed at the end of the list so that
they are more accessible if you want to work with them
(request a new send) or delete them.
- 64 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
The send memory (items sent)
Fax parameters
The sent memory is used to keep all faxes you have sent.
Access to fax parameters
The information in the send memory is:
•
•
•
•
the recipient of the fax,
the date the fax was created,
the date the fax was sent,
the size of the fax.
1 Click on the icon
of the window COMPANION
DIRECTOR.
2 Select TOOLS > OPTION > FAX.
3 Make the adjustments required, referring to the
description of parameters below and click OK.
The outbox log
The outbox log is used to keep a history of all fax
communications (successful or rejected) that your
Terminal processes. The log is printed automatically as
soon as its contents fill a page.
Description of the tab LOGS AND REPORTS
The button DELETE deletes the
entire log, and not simply the
selected message(s).
Important
The information held in the log is:
•
•
•
the recipient of the fax,
the date the fax was sent,
the status (sent, rejected ...).
The inbox log
The inbox log is used to keep a history of all faxes
received by your Terminal. The log is printed
automatically as soon as its contents fill a page.
The button DELETE deletes the
Option
Description
entire log, and not simply the
selected message(s).
Important
Automatic printing
of a received
document
The fax is automatically printed
when received.
The information held in the inbox log is:
•
•
•
the sender of the fax,
the date and reception of the fax,
the status.
Printing of a inbox
report
A report is printed out for each
fax received.
The log is automatically printed
when its contents fill a page.
Printing of inbox log
Automatic printing
of a sent document
The fax is automatically printed
when it is sent.
Printing of an
outbox report
An outbox report is printed after
each fax is sent.
Printing of the
outbox log
The log is automatically printed
when its contents fill a page.
- 65 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Description of the tab FAX PARAMETERS
Cover page
The cover page is part of a fax document automatically
generated by your terminal, on which there is information
concerning the sender, the recipient, the date, the time
sent, comments, etc...
This page may be sent alone or in front of a fax document,
but always at the same time as the document. A
document may be sent with a cover page from the
multifunction terminal or from the central processing unit.
In the latter case, some of the information in the cover
page may be provided by yourself when making the send
request. It is necessary to create model cover pages
before sending a document using them. On the other
hand, once the cover page is created, a model cover page
may be used for all documents sent.
Your terminal offers the possibility of creating and
customizing some model cover pages which you can
choose when sending a fax.
Option
Description
Creating a cover page template
Transmission
speed
Fax default transmission
speed.
Creating a cover page creates a template which fields (fax
number, comment, subject and so on) will be
automatically filled by the Fax Application depending on
the information provided for each recipient of a document.
Number of the line where your
terminal is connected.
Line number
Dialling prefix
To create this cover page template, there are two major
steps:
This dialling prefix shall be
automatically inserted in front
of the number before sending
on this line.
•
•
First step: Create a background image with the logos
and the layout that you wish.
Second step: Add the field that you want to be
displayed in the cover page: fax number, comment,
subject and so on. As mentioned before, these fields
will be filled by Fax application at emission time.
Must be parametered
according to the type of
switchboard your terminal is
connected to.
Type of dialing
Header
For the first step, there are two methods to create the
background image.
Displays a Communication
Identification Line (LIC) on the
documents you send or on the
documents you receive.
You can either
•
Option (A): Draw this background image in your
preferred application (such as Word, Excel,...),
Corrects communication errors
due to line disturbance. This
option ensures that received
documents are integral. On the
other hand, communication
times may be longer if the line
is bad.
OR
Option (B): Scan a sheet of paper containing the
layout of the cover page.
•
ECM
Number of attempts the
Number of attempts Terminal must make if send
fails.
Interval between
attempts
Duration between two send
attempts.
- 66 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Details about Option A and B:
•
Option (B): Launch MFMANAGER, select NEW FAX,
select the scanner source as shown below:
•
Option (A): Open the application that you want to use
to edit the background (Word, Wordpad...). Draw the
background image then print this document in the
printer named "Companion Suite Fax". At that point
the MFSendFax dialog is displayed:
Add any recipient to the recipient list, click on the tab
ADVANCED OPTIONS, select resolution FINE as shown
below:
Add any recipient to the recipient list, click on the tab
ADVANCED OPTIONS, select resolution FINE as shown
below:
Finally click on the button SAVE AS DRAFT in the lower
right corner (floppy disk icon). The background image
is created in the directory C:\Program
Files\Companion Suite Pro
LL 2\Documents\FAX\Temporary and has the file
extension .fax.
Finally click on the button SAVE AS DRAFT in the lower
right corner (floppy disk icon). The background image
is created in the directory C:\Program
Files\Companion Suite Pro
LL 2\Documents\FAX\Temporary and has the file
extension .fax
Whether you choose Option A or B, you end up with a
background image with extension .fax, which is located in
C:\Program Files\Companion Suite Pro
LL 2\Documents\FAX\Temporary.
You can now proceed to the second step right
Î
below.
- 67 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
For the second step:
3 Click on the icon
to display the available
Now that the background image is created in directory in
C:\Program Files\Companion Suite Pro
LL 2\Documents\FAX\Temporary, you can add the fields
on top of the background image.
fields.
Please follow the procedure below:
(a) Launch MFManager, select New Fax, click on the
tab Cover Page, and check the check box named
With the cover page.
(b) Click on the button New, this displays a new window
with the title Creation of the cover page.
(c) Press the button Open in the toolbar, change the file
filter to *.fax and browse to the directory C:\Program
Files\Companion Suite Pro LL 2 \Documents\FAX
\Temporary that contains the background image that
you have created in the First step.
(d) Click on the button Fields in the toolbar, a window
pops up allowing you to add the fields on top of the
background image.
(e) Click on the button Save to save the Cover Page
template and exit this window.
(f) The window New Fax is displayed, you can now
choose the Cover Page template that you want to
use. When you double click the preview image in the
lower right corner, another window pops up giving
you a preview of the cover page with the fields filled
with the recipient's information.
To add a field, proceed as follows:
- Select the field you want to insert by clicking the
field palette. A stamp replaces the cursor of your
mouse.
Creating a cover page
- Click the location where you want to put the field
on the model.
- You can move or enlarge the field as you like.
It is necessary to create a model
cover page before sending a fax
with it.
Important
Adjust the size of your field so that
Important
1 From the tab COVER PAGE, click on the button NEW.
the text is readable.
2 Select the model cover page you have created
using the menu FILE.
4 As soon as fields are inserted, save the cover
page.
A window with the model cover page you have
created is displayed:
This cover page can be selected in the tab COVER PAGE of
the fax send window.
- 68 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Description of the tab COVER PAGE
SMS Communications
From your PC, you can send SMS to a single recipient or
to multiple recipients using the distribution groups.
Communications being sent are monitored by means of
the outbox, the outbox log and the outbox memory (items
sent).
The SMS service is available
depending on the countries and the
operators.
Important
Presentation of the SMS window
Field
Description
Either the name of the page
selected by default or the page
you have selected to use.
Name of the cover
page
You can enter information
concerning the sender.
Sender
You can enter information
concerning the recipient.
If the word Auto is entered in
one of the fields, the field is
updated during sending if the
recipient is listed in the address
book, favourites, a group or a
distribution list.
Item
1
Action
Write an SMS.
Recipient
Delete an SMS from one of the SMS
manager directories. Except for the
directory SEND LOG for which the effect of
this command is to delete the entire log.
2
This is an editing window with
all the basic functions of a text
editor so that you can enter a
text which will be sent in the
cover page.
Print an SMS from one of the SMS
manager directories.
3
Comments
4
5
Display an SMS with the Viewer.
Access to the address book.
The preview enables you to
see the cover page you are
going to send.
Preview of the
model
Stop SMS sending (only enabled for the
outbox).
6
7
Displays all SMSs in the directory selected
in the Fax manager.
8
9
SMS preview.
SMS manager directories.
- 69 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Send an SMS
Follow-up of SMS
SMS communications are monitored by means of:
•
•
•
an outbox,
1 Click on the icon SMS
of the window
a sent item memory,
an outbox log.
COMPANION DIRECTOR.
2 Click on NEW then on SMS.
These services make it possible to have complete
information on the terminal activity with regard to
communications.
The outbox log is automatically printed when its contents
fill a page. After this automatic printing, the terminal
creates a new log.
The outbox
The following is grouped in the SMS outbox:
•
•
•
requests being sent,
send later requests,
requests for which one or more send attempts have
already been made, and which will soon be redialed,
•
requests which have been rejected.
3 Enter your message in the field CONTENT OF
MESSAGE provided for this purpose.
You can use the buttons and the "smiley" located
to the left of the input field to customize your
message, or to automatically insert the date and
time.
4 To send your SMS to a contact, enter his/her
number in the field TELEPHONE NUMBER and click
on
the address directory in the field CONTACT LIST and
click on
or select a recipient (or group) from one of
.
Repeat this operation as many times as necessary
(use the button
of contacts).
to delete a contact from the list
5 If necessary, adjust the advanced parameters (to
The outbox log
send later or give priority to the SMS) by pressing
The outbox log is used to keep the entire history of SMS
communications (successful or rejected) that have been
processed by your terminal. The log is printed
the button ADVANCED PARAMETERS (
).
automatically as soon as its contents fill a page.
The button DELETE deletes the
entire log, and not simply the
selected message(s).
Important
The information held in the log is:
•
•
•
the SMS recipient,
the date of sending of the SMS,
the status (sent, rejected,...).
6 Click on OK to send your SMS to all contacts in
your list of contacts.
Your send request can then be checked, if necessary, in
the outbox.
- 70 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
The sent item memory (items sent)
Software Uninstallation
The sent item memory is used to keep a copy of all SMS
messages you have sent.
This section describes the following procedures:
•
•
full uninstallation of the Companion Suite Pro
software,
The information in the sent item memory is:
•
•
•
•
the SMS recipient,
uninstallation of the drivers only.
the date of creation of the SMS,
the date of sending of the SMS,
the size of the SMS.
Uninstall the software from your PC
Turn your PC on. Open an account session with the
administration rights.
SMS Parameters
Run the programs removal from the menu START
>ALL PROGRAMS >COMPANION SUITE > COMPANION SUITE
PRO LL2 > UNINSTALL.
Access to SMS parameters
1 Click the icon SMS
of the window COMPANION
1 A confirmation screen appears. Click on the YES
button to continue the Companion Suite Pro
program removal.
DIRECTOR.
2 Select TOOLS > OPTIONS > SMS.
3 Make the adjustments required, referring to the
description of the parameters below and click OK.
Description of the tab LOGS AND REPORTS
2 The uninstall program is launched. You can cancel
the removal by clicking on CANCEL.
3 Click on the OK button.
4 You need to restart your system at the end of the
Option
Description
procedure. Click on the YES button.
Automatic printing
of a sent document
The SMS is automatically
printed when it is sent.
Printing of a send
report
An outbox report is printed after
each SMS is sent.
Uninstall the drivers from your PC
Printing of the
outbox log
The log is automatically printed
when its contents fill a page.
Turn your PC on. Open an account session with the
administration rights.
Depending on the installation mode used, select the
required uninstallation mode:
•
If you have installed the drivers with the Companion
Suite Pro software, see paragraph Uninstall the
•
If you have installed the drivers manually, see
- 71 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
6 Select the option REMOVE DRIVER AND DRIVER
Uninstall the drivers using the Companion Suite
Pro software
PACKAGE and click on the OK button.
Run the programs removal from the menu START
>ALL PROGRAMS >COMPANION SUITE >COMPANION SUITE
PRO LL2 > UNINSTALL.
You can also uninstall COMPANION
SUITE PRO LL2 drivers using the
Windows function ADD/REMOVE
Note
7 A confirmation screen appears. Click on the YES
PROGRAMS from the control panel.
button to continue.
8 Click on the DELETE button to confirm the removal.
1 A confirmation screen appears. Click on the YES
button to continue the COMPANION SUITE PRO LL2
drivers program removal.
2 The uninstall program is launched. You can cancel
To remove scan and modem drivers:
the removal by clicking on CANCEL.
1 Open the DEVICE MANAGER window (START
>CONTROL PANEL > SYSTEM > HARDWARE > DEVICE
MANAGER or START >CONTROL PANEL > HARDWARE
AND SOUND > DEVICE MANAGER, depending on the
operating system).
Uninstall the drivers manually
The following drivers must be removed:
•
•
•
print driver
scan driver
modem driver
To remove the print driver:
1 Open the PRINTERS window (START > CONTROL
PANEL > PRINTERS AND FAXES or START > CONTROL
PANEL > HARDWARE AND SOUND > PRINTERS,
depending the operating system).
2 Delete the LASER PRO LL2 icon.
3 In the PRINTERS window, right-click with the mouse
and select RUN AS ADMINISTRATOR > SERVER
PROPERTIES.
4 Select the DRIVERS tab.
5 Select the LASER PRO LL2 driver and click on the
REMOVE button.
2 In the OTHER DEVICES sub-menu, select the
MF PRINTER LASER PRO LL2 item and click on the
right button of the mouse.
3 Select UNINSTALL on the menu and left-click with
the mouse.
4 Click on the OK button to confirm the removal.
5 In the IMAGING DEVICES sub-menu, select the
SCANNER PRO LL2 item and right-click with the
mouse.
6 Select UNINSTALL on the menu and left-click with
the mouse.
7 Click on the OK button to confirm the removal.
- 72 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
To replace the toner cartridge, proceed as shown below.
Maintenance
1 Insert the smart card provided with the new toner
cartridge as shown on the picture below.
Service
General information
For your safety, it is imperative to
refer to the security directives
CAUTION
The following message appears:
To ensure that your machine is kept in the best
conditions, it is recommended that you periodically clean
the inner parts.
CHANGE TONER?
YES=OK - NO=C
2 Press OK.
Please respect the following rules while using this
machine:
- Do not leave the scanner cover open.
- Do not try to lubricate the device.
- Do not close the scanner cover violently or do not
apply vibrations to the machine.
- Do not open the cartridge access cover while printing.
- Do not try to disassemble the machine.
- Do not use paper which has stayed in the tray for too
long.
The following message appears:
OPEN FRONT COVER
REPLACE TONER
3 Stand in front of the device.
4 Push on the left and right sides of the cover and pull
it towards you.
5 Raise and remove the toner cartridge from the
machine.
6 Unpack the new cartridge and insert it into the slot
as indicated in the diagram below.
Toner cartridge replacement
Your machine comes with a current consumable
management system. It tells you if your toner cartridge is
close to its end of cycle.
The following messages will appear on your machine
screen when the toner cartridge reaches the critical
threshold (less than 10% toner cartridge left) and when it
is empty:
TONER NEAR
END
TONER EMPTY
REPLACE <OK>
You can however change the toner cartridge at any time,
before it reaches its end of cycle.
Always use the smart card provided
when replacing the toner cartridge.
The smart card contains the
information necessary to reset the
level of toner. Replacing the toner
cartridge without using a smart card
may result in the consumable
management system being
inaccurate.
Important
7 Close the cover.
The following message appears:
HAVE YOU CHANGED
THE TONER? <OK>
8 Press OK.
- 73 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
A wait message appears.
Document-feeder roller cleaning
PLEASE
WAIT
Clean the roller of the document feeder when:
•
one or more vertical lines appear on the copies of
documents placed on the document feeder (presence
of debris, ink, glue, etc., in the paper transport
mechanism).
The smart card is read.
NEW TONER
•
the message **YOU SHOULD CLEAN THE ROLLER OF THE
SCANNER FEEDER. PLEASE REFER TO USER MANUAL.
PRESS <STOP> WHEN THE ROLLER IS CLEANED** warns
you that the document feeder cannot transport paper
sheets anymore (dust, dirt or debris obstructing the
rollers). Press OK to clear the message on the screen.
REMOVE CARD
9 Remove the smart card from the reader, your
machine is ready to print again.
Issues with smart cards
To clean the document feeder roller, proceed as shown
below:
If you use a smart card that has already been used, the
machine will display:
PLEASE
WAIT
1 Press the On/Off button to turn off the device
(0 position) and unplug the power cord.
2 Open the document-feeder scanner cover.
then,
REMOVE CARD
ALREADY USED
If you use a defective smart card, the machine will display:
PLEASE
WAIT
then,
UNKNOWN CARD
REMOVE CARD
If the C button is pressed while the smart card is being
read, the machine displays:
3 Clean the rollers of the document feeder and the
two idler rollers located on the mobile part of the
scanner with a soft lint-free cloth dampened with
mild alcohol.
ACTION CANCELLED
REMOVE CARD
Cleaning
To clean them, rotate them in the same direction as
during paper transport.
Scanner reading system cleaning
When one or more vertical lines appear on the copies,
clean the glass of the scanner.
1 Open the scanner cover until it is standing in
vertical position.
2 Wipe the glass with a soft lint-free cloth soaked with
mild alcohol.
3 Close the scanner cover.
4 Make a copy to check that the symptoms have
disappeared.
Printer cleaning
Dust, dirtiness and paper debris on the external and
internal surfaces of the printer can affect its operation. We
advise that it is cleaned regularly.
4 Wipe the rollers with a soft, dry lint-free cloth until
they are dry.
5 Close the document-feeder scanner cover.
6 Plug the power cord to outlet on the wall and press
Printer external cleaning
the On/Off button to turn on the device (I position).
Clean the external part of the printer with a soft cloth
soaked in mild detergent.
7 Make a copy to check that the symptoms have
disappeared.
- 74 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Printer issues
Paper jam
When printing, a sheet of paper may get stuck in the
printer or the paper tray and cause a paper jam.
Error messages
When the printer encounters any of the problems
described below, the corresponding message is shown
on the machine display.
In case of a paper jam in the machine, the following
message appears:
PAPER JAM
Message
Action
EXTERNAL TRAY
Check the presence of a
toner cartridge in the
machine.
1 Open the paper jam cover located at the back of
CHECK TONER
the machine.
2 Remove the jammed sheet of paper and close the
cover.
Indicates that your
consumable will need
changing soon.
TONER NEAR END
REPLACE PAPER
HEATING
Add paper in tray.
Message displayed when
starting the machine.
CLOSE COVER
PRINTER
The printer front cover is
open, close it.
TONER EMPTY
REPLACE <OK>
Replace the toner cartridge.
A sheet of paper is jammed
in the machine. Take out
the toner cartridge and
remove the jammed paper
sheet. Take out the paper
tray and remove the
3 Open and close the front cover.
The printer starts again automatically.
PAPER JAM
REMOVE TONER
The fusion unit can reach a very
high temperature during the
jammed paper sheet. Then
open and close the
operation. To prevent any harm, do
not touch this area. For details,
CAUTION
consumable cover.
refer to Positions of Safety labels
A sheet of paper is jammed
in the machine. Open the
paper jam cover. Remove
the jammed paper sheet.
Then open and close the
consumable cover.
In case of paper jam, the following message appears:
PAPER JAM
EXTERNAL TRAY
PAPER JAM
REMOVE TONER
1 Remove the toner cartridge and check if a sheet is
jammed.
PAPER EMPTY
Add paper in the paper tray.
2 Remove the sheet of paper which causes the paper
jam.
INFORMATION
**You should clean
the roller of the
scanner feeder.
Please refer to user
manual. Press
3 Put the toner cartridge in the machine, or remove
the paper tray and remove the sheet of paper which
causes the paper jam.
The document feeder
cannot transport paper
sheets anymore (dust, dirt
or debris obstructing the
rollers). Clean the roller of
the document feeder.
4 Check that the paper sheets in the paper tray are
correctly placed.
<STOP> when the
roller is cleaned**.
After one of the error messages listed
above is displayed, it may happen that
the active print job is cancelled (see
In case of printing of received fax, the
print job is always restarted after
clearing of the error.
Note
5 Replace the paper tray in the machine.
- 75 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Scanner issues
Communication errors
When a paper jam occurs, the following message If the communication fails, the terminal advises you of an
appears:
automatic retry later.
Example of what is displayed:
REMOVE DOCUMENT
STOP TO CONFIRM
Current time
Time of next try
FRI 12 DEC 20:13
0142685014 20:18
1 Open the document feeder scanner cover.
Transmission from the feeder
You have the choice between:
•
waiting until the transmission takes place at the given
time,
•
restarting the transmission immediately by
pressing
abandoning transmission by pressing
the document, press again.
,
•
. To eject
2 Remove the jammed paper without tearing it.
Transmission from memory
3 Close the document feeder scanner cover.
You have the choice between:
4 Press
.
•
waiting until the transmission takes place at the given
time,
•
restarting the transmission using the transmission
queue. In this case, for a document composed of
several pages, the transmission will take place from
the page where the error occurred (see Performing
page 26),
Miscellaneous issues
When turning on the terminal, nothing is displayed on
the screen.
Check the connection between the power cord and the
outlet.
•
abandoning the transmission by deleting the
corresponding command in the transmission line (see
The terminal does not detect the presence of the
document inserted in the scanner document feeder.
The message READY does not appear on the screen.
At the start and during scanning, REMOVE DOCUMENT
appears on the screen.
The terminal makes at most 5 automatic redials. The non-
transmitted document is automatically deleted from the
memory and a transmission report is then printed together
with an error code and the cause for transmission failure
(see the communication error codes).
1 Remove the document or press button
.
2 Check the thickness of the document (50 sheets of
paper of 80 g/m2).
3 Iron out the sheets if needed.
Communication error codes
4 Help the sheets along.
The communication error codes appear in the logs and
transmission reports.
The terminal does not receive any faxes.
1 Check that the telephone line cable is correctly
General codes
plugged in.
2 Check that there is a tone signal on the telephone
Code 01 - Busy or no fax answer
This code appears after 6 unsatisfactory attempts. Call
later.
line by means of the button
.
Code 03 - User break
A communication has been stopped by the user pressing
You receive a blank page.
1 Make a photocopy of a document; if it is correct
then your fax is functioning normally.
the button
.
2 Call back the subscriber and have him / her resend
the document. It was probably sent with the sheet
inserted backwards.
Code 04 - Non programmed number
A number saved as a one-touch key or abbreviated
number is not valid, check it. (Example: a delayed
transmission was programmed with a one-touch key and
this key has been deleted in the meantime).
Code 05 - Scanning default
You cannot send a fax.
1 Check that the telephone line cable is correctly
plugged in.
An incident occurred with the scanner, for example, the
sheet is jammed.
2 Check the tone by pressing the button
.
3 Check the prefix is correctly programmed and
used.
- 76 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Code 06 - Printer default
PC printing issues
An incident occurred in the printer: no paper, paper jam,
opened cover... In the reception mode, this incident
appears only if the reception parameter is switched to
WITHOUT PAPER.
This section details how the machine handles a print
request after having encountered an issue (paper jam,
connection loss, etc.).
Code 07 - Disconnected
Refer to the sections below to know if the printing of your
document will resume or will be cancelled, depending on:
The link has been cut (bad line). Check the number and
try again.
Code 08 - Quality
•
•
the connection to the PC,
The document you sent was not well received. Contact
your subscriber to see if you need to send again.
Code 0A - No document to be polled
You tried to poll a document from a subscriber who had
not prepared his/her document (no deposit) or the
password entered was incorrect.
the problem encountered during printing.
PC printing via USB connection
Code 0B - Wrong number of pages
Issue encountered
Print request handling
There is a difference between the number of pages
indicated during preparation for the transmission and the
number of pages sent. Check the number of pages in the
document.
Once the problem is resolved,
printing resumes from the first
non-printed page.
Paper empty
Code 0C - Received document error
Ask the subscriber who called you to check the length of
his/her document (it may be too long to be completely
received).
Code 0D - Transmission failed
Ask the sender to resend the document.
Code 13 - Memory full
Your fax can no longer receive since its memory is full.
There are too many received unprinted documents or too
many documents in the transmission line.
Print the received documents and delete or transmit
immediately the documents in the transmission line.
Code 14 - Memory full
No paper feed
Paper jam
Once the problem is resolved,
printing resumes from the first
non-printed page.
Exception: If the document
was to be printed in manual
duplex mode, the printing of
the document is cancelled.
Paper format problem
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will print
after the toner cartridge is
replaced.
Toner empty
Received document memory full. Print all received
documents.
Code 15 - Unknown mailbox number
You wish to deposit a document in a subscriber’s mailbox.
The mailbox number does not exist.
The machine switches to idle
mode after a timeout (30
seconds by default).
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
Code 16 - No Relay Bcst list Nr x
Pause requested
from the spooler
You requested a document relay from a remote fax but
the fax has not programmed the list of subscribers
requested.
Code 17 - Unknown mailbox number
You wish to recover a document from a subscriber’s
mailbox. The mailbox number does not exist.
Code 18 - Relay Bcst impossible
You requested a document relay from a remote fax which
does not have the relay broadcast function.
Code 19 - Subscriber has stopped
The communication has been stopped by your
subscriber. (Example: a fax wanted to poll your fax but
there is no document deposited).
Once the problem is resolved,
the printing of the document
restarts from the beginning,
regardless of the number of
pages already printed before
the connection loss.
Loss of USB
connection
Code 1A - Disconnected
The transmission has not started. The telephone line is
busy.
Code 1B - Transmission failed
During transmission: start again.
During reception: ask your subscriber to resend the
document.
Code 50 - Server error
Check the number configured for the SMS server or a
communication error occurred during data transmission.
- 77 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
PC printing via WLAN connection
Firmware update
Updating the machine firmware requires that the
Companion Suite Pro software be installed on your PC,
and that the PC is connected to the machine (see PC
Issue encountered
Print request handling
Once the problem is resolved,
printing resumes from the first
non-printed page.
Paper empty
check if firmware updates are available for your machine,
and download the appropriate update file on your PC.
No paper feed
Paper jam
Once the problem is resolved,
printing resumes from the first
non-printed page.
Then, access the update utility (START > ALL PROGRAMS
> COMPANION SUITE > COMPANION SUITE PRO LL2
Exception: If the document
was to be printed in manual
duplex mode, the printing of
the document is cancelled.
> COMPANION -
downloaded file and launch the update.
FIRMWARE
UPDATE),
select
the
Paper format problem
versions of this manual after the software is updated.
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
Toner empty
or
Printing resumes from the
first non-printed page.
The machine switches to idle
mode after a timeout (30
seconds by default).
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
Pause requested
from the spooler
Once the problem is resolved,
the printing of the document
restarts from the beginning,
regardless of the number of
pages already printed before
the connection loss.
Loss of WLAN
connection
- 78 -
Download from Www.Somanuals.com. All Manuals Search And Download.
LFF6050
Specifications
Physical specifications
Dimensions:
Weight:
412 x 447 x 386 mm
13 kg
Electrical specifications
Power supply (see rating plate):
Electric consumption:
Single phase 220-240 V - 50/60 Hz - 4.5 A
12 W typical in powersave
35 W typical in standby
450 W average during printing (900W peak)
Environmental specifications
Operating temperature:
10 °C to 27 °C [50 °F to 80.6 °F] with an ambient humidity
included between 15 to 80% (up to 32°C [89.6 °F] with an ambient
humidity included between 15 to 54%)
Peripheral specifications
Printer
Type:
Resolution:
Speed:
Laser (on normal paper)
600 dpi
a
20 ppm maximum
Preheating time:
First page out time:
21 sec.
13 sec.
a. Printing speed may vary depending on used operating systems, computer specifications, software applications, connection modes
(USB or WLAN), paper formats as well as file types and sizes.
Copier
Type:
Autonomous Black and White
20 ppm maximum
600 dpi
99 pages maximum
25 % to 400 %
Copy speed:
Resolution:
Multiple copies:
Zoom range:
Scanner
Type:
Colour scanner
50 sheets
36 bits
600 dpi (optical)
2400 dpi (interpolated)
TWAIN, WIA
Letter
Document feeder capacity:
Colour depth:
Resolution:
Software compatibility:
Maximum paper format:
Printing supports
Main paper tray capacity:
Output tray capacity:
250 sheets maximum (60 g/m²), 200 sheets maximum (80 g/m²)
50 sheets
Main tray paper format:
A4, A5, Statement, Legal, Letter
60 to 105 g/m² paper
Paper format for manual printing:
A4, A5, Statement, Legal, Letter, B5, exec, A6
52 to 160 g/m² paper
PC connection
Slave USB 2.0 port (PC connection)
Master USB 2.0 port (Wlan connection, reader, USB memory key reader, USB-DECT base dongle - option)
Operating System: Windows 2000 ≥ SP4, Windows XP x86 ≥ SP1, Windows Vista, Windows 2003 server (for printing
only)
- 79 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Information
Hotline Introduction
We constantly strive to develop our products according to the highest quality
standards and with the greatest possible user-friendliness.
In your user manual you will find all the information required to use your ma-
chine. If you nevertheless require assistance in addition to the user manual, our
call centre is available. Our employees are trained experts who would be hap-
py to answer your questions.
We can assist your more quickly if you do not call us from the machine, rather
an external telephone. Keep a printout of the settings as well as the serial
number of the machine handy. The serial number can be found on the type
plate.
PC Connection
Should problems with the PC connection arise, have the following information
to hand when you contact technical customer services: hardware configuration
of your computer, operating system installed and security programmes used
(anti-virus programmes, firewall). Then we can help you more quickly.
United Kingdom
Call-Center Philips United Kingdom
Telephone: 08 71 - 075 07 11 (0,10 £/minute)
Fax: 08 70 - 124 02 02
Direct-Sales Philips Allgemein
Use only PHILIPS accessories. The warranty does not cover damages to the
machine resulting from the use of other consumable materials.
Direct-Sales Philips GB INT
·
In United Kingdom, you can order PHILIPS accessories by telephone via our
toll-free telephone number.
Direct-Sales Philips/Sagem United Kingdom
United Kingdom
Telephone: 08 00 - 358 08 07
E-Mail: dti.faxinfoline@sagem.com
We hope that you will enjoy using your new product!
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V.
and are used by SAGEM COMMUNICATIONS under license from Koninklijke Philips Electronics N.V.
SAGEM COMMUNICATIONS
Printing Terminals
Headquarters : Le Ponant de Paris
27, rue Leblanc · 75015 Paris · FRANCE
LFF6050
GB · INT
253118301-A
Tél. : +33 1 58 11 77 00 · Fax : +33 1 58 11 77 77
Limited company · Capital 158.291.895 Euros · 440 294 510 RCS PARIS
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Pentair Swimming Pool Pump 100 User Manual
Philips Coffeemaker HD7001 User Manual
Philips Flat Panel Television UIP200 User Manual
Philips Home Theater System HTS3010 User Manual
Philips Iron GC4425 User Manual
Pioneer Computer Monitor PRO FHD1 User Manual
Polaris Offroad Vehicle 120 Youth User Manual
Porter Cable Air Compressor C3555 User Manual
Poulan Trimmer GHT195 User Manual
Poulan Trimmer HT14 HT17 HT19 HT22 User Manual