Philips Flat Panel Television UIP200 User Manual

www.philips.com/welcome

USER MANUAL

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Install channels

Automatically install channels

Manually install channels

Rename channels

Contents

1 Notice

Uninstall or reinstall channels

Rearrange channels

Manually update the channel list

Test digital reception

Start a demo

ResetTV to factory settings

2 Important

Safety

Screen care

Environmental care

8 Connect devices

Connection overview

Select connection quality

Connect devices

3 Your TV

TV overview

4 Get started

Setup devices

Use Philips EasyLink

PrepareTV for digital services

Position theTV

Wall mount theTV

Connect the antenna cable

Connect the mains cord

Insert the remote control batteries

Switch on theTV

9 Technical speciﬁcations

Product speciﬁcations-Supported display

resolutions

First time setup

Tuner/Reception/Transmission

Multimedia

Remote control

Connections (Rear)

Connections (Side)

Power

5 Use your TV

Switch yourTV on/off or to standby

WatchTV

Watch connected devices

Use teletext

Use Ambilight

10 Troubleshooting

GeneralTV issues

TV channel issues

Sound issues

6 Use more of your TV

Remote control overview

UseTV menus

Picture issues

Adjust picture and sound settings

Adjust Ambilight settings

Adjust LightGuide brightness

Change to Shop or Home mode

Use advanced teletext features

Create favourite lists

Use the Electronic Programme Guide

Use timers and Child lock

Use subtitles

HDMI connection issues

USB connection issues

PC connection issues

View photos and listen to music

Listen to digital radio channels

Update yourTV software

Download from Www.Somanuals.com. All Manuals Search And Download.

of the corresponding source code on a medium

customarily used for software interchange.

This offer is valid for a period of 3 years after

the date of purchase of this product.To obtain

the source code, write to

1 Notice

2008 © Koninklijke Philips Electronics N.V.All

rights reserved.

Philips Consumer Lifestyle

Speciﬁcations are subject to change without

notice.Trademarks are the property of

Koninklijke Philips Electronics N.V. or their

respective owners.

Development Manager

LoB Mainstream Displays

620A Lorong 1,Toa Payoh

Singapore 319762

Philips reserves the right to change products at

any time without being obliged to adjust earlier

supplies accordingly.

Compliance with EMF

Koninklijke Philips Electronics N.V. manufactures

and sells many products targeted at consumers

which, like any electronic apparatus, in

general have the ability to emit and receive

electromagnetic signals.

One of Philips’ leading Business Principles is to

take all necessary health and safety measures

for our products, to comply with all applicable

legal requirements and to stay well within

the EMF standards applicable at the time of

producing the products.

Philips is committed to develop, produce and

market products that cause no adverse health

effects. Philips conﬁrms that if its products are

handled properly for their intended use, they

are safe to use according to scientiﬁc evidence

available today.

Philips plays an active role in the development

of international EMF and safety standards,

enabling Philips to anticipate further

developments in standardisation for early

integration in its products.

The material in this manual is believed

adequate for the intended use of the system.

If the product, or its individual modules or

procedures, are used for purposes other than

those speciﬁed herein, conﬁrmation of their

validity and suitability must be obtained. Philips

warrants that the material itself does not

infringe any United States patents. No further

warranty is expressed or implied.

Warranty

No components are user serviceable. Do not

open or remove covers to the inside of the

product. Repairs may only be done by Philips

Service Centres and ofﬁcial repair shops. Failure

to do so shall void any warranty, stated or

implied.

Any operation expressly prohibited in

this manual, any adjustments, or assembly

procedures not recommended or authorised in

this manual shall void the warranty.

Pixel characteristics

Mains fuse (UK only)

This LCD product has a high number of

colour pixels.Although it has effective pixels of

99.999% or more, black dots or bright points of

light (red, green or blue) may appear constantly

on the screen.This is a structural property of

the display (within common industry standards)

and is not a malfunction.

ThisTV is ﬁtted with an approved moulded

plug. Should it become necessary to replace

the mains fuse, this must be replaced with a

fuse of the same value as indicated on the plug

(example 10A).

1 Remove fuse cover and fuse.

2 The replacement fuse must comply with

BS 1362 and have the ASTA approval

mark. If the fuse is lost, contact your dealer

in order to verify the correct type.

Open source software

This television contains open source software.

Philips hereby offers to deliver or make

available, upon request, for a charge no more

than the cost of physically performing source

distribution, a complete machine-readable copy

3 Reﬁt the fuse cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

In order to maintain conformity to the EMC

directive, the mains plug on this product must

not be detached from the mains cord.

VESA, FDMI and theVESA Mounting Compliant

logo are trademarks of theVideo Electronics

Standards Association.

Manufactured under licencse from Dolby

Laboratories.‘Dolby’,‘Pro Logic’ and the

double D symbol , are trademarks of Dolby

Laboratories.

Manufactured under licencse from BBE Sound,

Inc. Licensed by BBE, Inc under one or more

of the following US patents: 5510752,5736897.

BBE and BBE symbol are registered trademarks

of BBE Sound Inc.

® Kensington and Micro Saver are registered

US trademarks of ACCO World corporation

with issued registrations and pending

applications in other countries throughout the

world.

All other registered and unregistered

trademarks are the property of their respective

owners.

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Do not install theTV in a conﬁned space

such as a bookcase. Leave a space of at

least 10cm (four inches) around theTV

for ventilation. Be sure the air ﬂow is not

obstructed.

If placing theTV on a ﬂat, solid surface, be

sure to use only the supplied stand. Do not

move theTV if the stand is not properly

screwed to theTV.

Wall mounting of theTV should only be

performed by qualiﬁed personnel.TheTV

must only be mounted on an appropriate

wall bracket and on a wall that can safely

hold the weight of theTV. Improper wall

mounting can result in severe injury or

damage. Do not attempt to wall mount

theTV yourself.

2 Important

Read this user manual before you start to use

this product.

•

Pay close attention to this section and follow

the safety and screen care instructions.The

product warranty does not apply if damage is

caused by failing to follow these instructions.

The model and serial number of yourTV can

be found on the back and side of theTV as well

as on the packaging.

•

If theTV is mounted on a swivel base

or swivel arm, ensure no strain is placed

on the power cord cable when theTV is

swivelled. Strain on the power cord cable

can loosen connections and cause arcing

or ﬁre.

Disconnect theTV from the mains and

antenna before lightning storms. During

lightning storms do not touch any part of

theTV, mains cord cable or antenna cable.

Be sure that you have full access to the

mains cord cable for easy disconnection of

theTV from the mains.

Safety

•

Two people are required to lift and carry

anTV that weighs more than 25 kilos

(55lb). Improper handling of theTV can

result in serious injury.

When disconnecting theTV from the

mains, be sure to:

1 Turn off theTV, then the mains power (if

•

If transporting theTV in low temperatures

(less than 5°C), open the box and

wait until theTV matches the ambient

temperature of the room before

unpacking.

To avoid short- circuit, do not expose the

TV, remote control or remote control

batteries to rain or water.

To avoid risk of ﬁre or electric shock,

do not place theTV, remote control or

remote control batteries near naked ﬂame

sources (e.g. lighted candles) and other

heat sources including direct sunlight.

available).

2 Unplug the mains cord cable from the

mains socket outlet.

3 Unplug the mains cord cable from the

power connector at the back of theTV.

Always pull the mains cord cable by the

plug. Do not pull the mains cord.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

periods of time. Examples include screen

menus, teletext pages, black bars or stock

market tickers. If you must use stationary

images, reduce the screen contrast and

brightness to avoid screen damage.

Environmental care

Recycling your packaging

The packaging of this product is intended to

be recycled. Contact your local authorities for

information on how to recycle the packaging.

Disposing of your used product

Your product is manufactured with high-quality

materials and components that can be recycled

and reused.When you see the crossed-out

wheel bin symbol attached to a product, it

means the product is covered by the European

Directive 2002/96/EC:

•

Permanent hearing loss can occur if you

use earphones or headphones at high

volumes.Though high volume may sound

normal over time, it can damage your

hearing.To protect your hearing, limit the

amount of time you use earphones or

headphones at high volume.

Screen care

•

Turn off and unplug the mains cord cable

before cleaning the screen. Clean the

screen with a soft, dry cloth. Do not use

substances such as household cleaning

agents as theyse may damage the screen.

Do not dispose your used product with

household waste.Ask your dealer for

information on how to safely dispose of the

product. Uncontrolled waste disposal harms

both the environment and human health.

Disposing of used batteries

The supplied batteries do not contain

mercury or cadmium. Dispose supplied and all

other used batteries according to your local

regulations.

Power consumption

TheTV consumes minimal energy in standby

mode to minimisze environmental impact.

Active power consumption is displayed at the

back of theTV. For more product speciﬁcations,

see the product leaﬂet at www.philips.com/

support.

•

To avoid deformations or colour fading,

wipe off water droplets as soon as possible.

Do not touch, push, rub or strike the

screen with hard objects as this may

damage the screen permanently.

•

Where possible, avoid stationary images

that remain on-screen for extended

Download from Www.Somanuals.com. All Manuals Search And Download.

Side connectors

3 YourTV

Congratulations on your purchase, and

welcome to Philips!To fully beneﬁt from the

support that Philips offers, register your product

at www.Philips.com/welcome.

TV overview

This section gives you an overview of

commonly-usedTV controls and functions.

Side controls and indicators

Use theTV side connectors to connect to

mobile devices such as a camera or high-

deﬁnition game console.You can also connect a

pair of headphones or a USB memory device.

VOLUME

Back connectors

PROGRAM

POWER

a POWER

b Program +/-

c MENU

Use theTV back connectors to connect to the

antenna and permanent devices such as a high-

deﬁnition disc player, DVD player orVCR (see

‘Connect devices’ on page 41).

Volume +/-

e Standby indicator / Remote control

sensor

f LightGuide

Download from Www.Somanuals.com. All Manuals Search And Download.

Standby

Remote control

b INPUT

c Colour keys

From left: Red, green, yellow, blue

d Navigation keys

Up , Down , Left , Right , OK

Teletext

f MENU

g Program +/-

Volume +/-

i AMBILIGHT

Download from Www.Somanuals.com. All Manuals Search And Download.

inches) away from the wall.Ambilight

works best in a room with dim lighting.

4 Get started

This section helps you position and install the

TV and supplements the information provided

in the Quick Start Guide.

Wall mount theTV

Warning

Note

• Wall mounting of theTV should only be performed by

qualiﬁed installers. Koninklijke Philips Electronics N.V.

bears no responsibility for improper mounting that

results in accident or injury.

• Refer to the Quick Start Guide for stand mounting

instructions.

Step 1: Purchase aVESA-compatible

wall bracket

Position theTV

In addition to reading and understanding the

safety instructions, consider the following before

positioning yourTV:

Depending on the size of yourTV screen,

purchase one of the following wall brackets:

TV screen VESA compatible

size (inches/ wall bracket type

Special

instructions

•

The ideal viewing distance for watchingTV

is three times its screen size.

Position theTV where light does not fall on

the screen.

Connect your devices before you position

yourTV.

YourTV is equipped with a Kensington

Security Slot at on the back of theTV. If

connecting an anti-theft Kensington lock

(not supplied), position theTV within reach

of a permanent object (such as a table)

that can be easily attached to the lock.

cm)

(millimetersmillimetres)

32”/81cm Adjustable 300 x 300 TheVESA-

compatible

bracket

must be

adjusted

to 200 x

300 before

securing to

theTV

37”/94cm Fixed 300 x 300

42”/107cm Fixed 400 x 400

or larger

None

Step 2: Remove theTV stand

These instructions are only applicable toTV

models with mounted stands. If yourTV stand

is not mounted, skip to Step 3.TV stands may

differ in shape on someTV models.

1 Carefully place theTV face down on a

ﬂat, stable surface that is covered by soft

cloth.The cloth should be thick enough to

protect your screen.

•

For the best Ambilight effect, position the

TV 10cm (four inches) to 20cm (eight

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Using a cross-head screwdriver (not

supplied), unscrew the four bolts that

secure the stand to theTV.

2 Continue with the instructions provided

with yourVESA-compatible wall bracket.

Note

• When securing theVESA-compatible wall bracket to

yourTV, use M6 bolts for 32 inch models or M8 bolts

for larger models (bolts not supplied).

Connect the antenna cable

3 Firmly pull the stand from the bottom of

theTV. Place both the stand and bolts in a

secure location for future reinstallation.

Cable

1 Locate the TV ANTENNA connector at

the back of theTV.

2 Connect one end of an antenna cable (not

supplied) to the TV ANTENNA connector.

Use an adaptor if the antenna cable does

not ﬁt.

Step 3: Secure theVESA-compatible

wall bracket to theTV

1 Locate the four mounting nuts at the back

3 Connect the other end of the antenna

cable to your antenna outlet, ensuring that

the cable is tightly secured at both ends.

of theTV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connect the mains cord

Insert the remote control

batteries

Warning

• Verify that your mains voltage corresponds with the

voltage printed at on the back of theTV. Do not insert

the mains cord cable if the voltage is different.

To connect the mains cord

1 Open the battery cover on the back of the

remote control.

Note

2 Insert the two supplied batteries (Size AA).

Be sure the + and - ends of the batteries

line up with the markings inside the case.

• The location of the mains connector varies according

toTV model.

3 Close the cover back into position.

Note

• Remove the batteries if not using the remote control

for an extended period of time.

Switch on theTV

The ﬁrst time you switch on theTV, check that

the mains cord cable is properly connected.

When ready, turn on the mains (if mains switch

is available), then press POWER on the side of

theTV.

Note

• CertainTV models require you to press and hold

POWER for up to two seconds.A beep sound

indicates that yourTV is switched on.YourTV may take

up to 15 seconds to start.

UK - EIRE

1 Locate the AC IN mains connector at the

back or on the bottom of theTV.

2 Connect the mains cord cable to the AC

IN mains connector.

3 Connect the mains cord cable to the

mains, ensuring that the cord cable is tightly

secured at both ends.

10 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

First time setup

1 ^{The ﬁrst time theTV is switched on, a}

language selection menu appears. Select

your language and follow the on-screen

instructions to set up theTV.

Menu language

Please select your

language...

English

Español

Français

Hrvatski

Italiano

Magyar

...

using cursor up and

down

EN 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Switch yourTV to standby

5 Use yourTV

This section helps you perform basicTV

operations. Instructions on advancedTV

operations are also available (see ‘Use more of

yourTV’ on page 16).

•

Press Standby on the remote control.

» LightGuide switches off and the

standby indicator switches on (red).

Switch yourTV on/off or to

standby

Tip

Switch on yourTV

• Though yourTV consumes very little power when in

standby, energy continues to be consumed as long as

the mains remain connected and powered.When not

in use for extended periods of time, switch off and

disconnect theTV from the mains.

POWER

Switch on theTV from standby

•

If LightGuide (1) is off, press POWER on

the side of theTV.

» LightGuide ﬂashes during start up,

turning on completely when yourTV is

ready for use.

•

If the power indicator is in Standby

(red), press Standby on the remote control.

Switch off yourTV

POWER

•

Press POWER on the side of theTV.

» Both LightGuide (1) and the standby

indicator (2) switch off.

12 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press INPUT on the remote control.

Note

3 Select the input your digital receiver is

• If you cannot locate your remote control and you

want to switch on theTV from standby, press POWER

on the side of theTV.This switches off yourTV. Press

POWER again to switch theTV back on.

connected to.

4 Press OK to select the digital receiver.

5 Use the remote control of the digital

receiver to selectTV channels.

Adjust volume

WatchTV

Switch channels

•

Press

+/- on the remote control.

Volume +/- on the side controls

of yourTV.

•

Press on the remote control to mute

the sound. Press again to un-mute the

sound.

•

Press a number (1 to 999) or press - P +

on your remote control.

Press Program +/- on the side controls of

theTV.

Press

Previous channel on the

remote control to return to the previously-

viewedTV channel.

Switch channels (digital receiver)

1 Switch on the digital receiver.

EN 13

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Press - P + or

the previous page.

Press a colour key to select one of the

colour- coded items at the bottom of

the screen.

to view the next or

Note

• If headphones are connected, adjust volume by

changing headphone volume.You must press the

button on the remote control to mute audio from the

TV speakers. Pressing

speakers again.

Volume +/- turns on theTV

3 Press Teletext again to switch off

teletext.

Tip

• Press

Previous channel to return to the previously

viewed page.

Watch connected devices

Note

• For UK users only:

• Some digitalTV channels offer dedicated digital text

services (for example, BBC1).

Advanced information on teletext is available

(see ‘Use advanced teletext features’ on page

26).

1 Switch on the device.

2 Press INPUT on the remote control.

Use Ambilight

3 Select the input your device is connected

to.

Ambilight is an innovative Philips feature that

adds reactive ambient lighting to your viewing

experience.

4 Press OK to select the device.

Use teletext

1 Press AMBILIGHT on the remote control.

» Ambilight turns on.

1 Press Teletext on the remote control.

» The main index page appears.

2 Press AMBILIGHT again to turn off

Ambilight.

2 To select a page:

•

Enter the page number with the

number keys.

14 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Change Ambilight mode

1 With Ambilight turned on, press MODE

on the remote control.

» An Ambilight [Mode] screen appears.

2 Press MODE or

to select one of the

following Ambilight modes:

•

[Colour]

Sets Ambilight to a constant colour.

[Relaxed]

Sets Ambilight to change soft and

smoothly in sync with the images

on-screen.

•

[Moderate]

Sets Ambilight between [Relaxed] and

[Dynamic] modes.

[Dynamic]

Sets Ambilight to change quickly and

responsively with the images on-

screen.

3 Press OK to activate the Ambilight mode.

EN 15

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Use more of

yourTV

This section helps you perform advancedTV

operations.

Remote control overview

This section provides a detailed overview of

remote control features.

Standby

Switches theTV on from standby or back

to standby.

b INPUT

Selects connected devices.

16 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Activates the [Quick access] menu.

t DEMO

Dual Screen

Splits the current channel or source on the

left of the screen.Teletext appears on the

right.

Toggles the [Demo] menu on or off.

Subtitle

Picture format

Selects a picture format.

Activates or deactivates subtitles.

v MHEG CANCEL

Cancels digital text or interactive services

(UK only).

e Colour keys

Selects tasks or teletext pages.

f GUIDE

Toggles the Electronic Programme Guide

on or off. Only active with digital channels.

UseTV menus

g OK

On-screen menus help you install yourTV,

adjust picture, sound and Ambilight settings and

access other features.This section describes

how to navigate the menus.

Accesses the [All channels] menu or

activates a setting.

h Navigation keys

Up, Down, Left and Right keys navigate the

menu.

Access the main menu

Teletext

Toggles teletext on or off.

j Program +/-

Switches to the next or previous channel.

Mute

Mutes or restores sound.

l Number keys

Selects a channel, page or setting.

Previous channel

Returns to the previously-viewed channel.

1 Press MENU on the remote control to

display the main menu.

n MODE

Toggles Ambilight modes.

Television

TV menu

o AMBILIGHT

Switches Ambilight on or off.

Channel list

Programme guide

p INFO

Displays programme information, if

available.

Multimedia

Volume +/-

Increases or decreases volume.

2 Press MENU to exit.

The main menu offers the following items:

r MENU

Toggles the menu on or off.

•

[TV menu]

s OPTION

EN 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Select this menu for installation,

picture and sound settings,Ambilight

and other feature settings.

[Channel list]

Select this item to display the Channel

list. Create your Favourite channel lists

here.

TV menu

TV settings

Features

Installation

Software update

Settings assistant

Reset smart settings

Picture

•

Sound

[Programme guide]

Available when digital channels are

installed, this item displays information

about the digital programs (see ‘Use

the Electronic Programme Guide’ on

page 29).

3 Press to enter the [TV Settings] menu.

TV settings

Settings assistant

•

[Multimedia]

Settings assistant

Reset smart settings Start now

Picture

Sound

Select this item to view photos or

play music stored on a USB device

(see ‘View photos and listen to music’

on page 33).

Ambilight

Use the main menu

The following example describes how to use

the main menu.

4 Press to select [Picture].

TV settings

Picture

Settings assistant

Reset smart settings

Picture

Contrast

Brightness

Colour

Hue

Sound

Sharpness

Ambilight

Tint

Pixel Plus

1 Press MENU on the remote control to

display the main menu.

HD Natural Motion

Dynamic contrast

Noise reduction

MPEG artefact reduction

Colour enhancement

Active Control

Light sensor

Picture format

Television

TV menu

Channel list

Programme guide

Multimedia

2 Press to enter the [TV menu].

18 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Press to enter the [Picture] settings.

Brightness

Picture

Contrast

Brightness 47

Colour

Hue

Sharpness

Tint

Pixel Plus

HD Natural Motion

6 Press to select [Brightness].

8 Press

or to adjust the setting.

Picture

Brightness

9 Press to return to the [Picture] settings

or press MENU to exit.

Contrast

Brightness 47

Note

Colour

Hue

• More choices are available when digital channels are

installed and broadcast.

Sharpness

Tint

Pixel Plus

Use the Quick access menu

The [Quick access] menu gives direct access to

some often-needed menu items.

HD Natural Motion

7 Press to enter the [Brightness] setting.

Note

• When digital channels are installed and broadcasted,

the relevant digital options are displayed in the [Quick

access] menu.

1 Press OPTION on the remote control.

2 Press, or to select an option:

•

[Audio language] (digital)

[Subtitle language] (digital)

[Subtitle]

[Picture format]

[Equalizer]

[Clock]

EN 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Use settings assistant

3 Press OK to display the selected option

menu.

Use [Settings assistant] to guide you through

4 Press

Navigation keys to adjust the

settings in the menu.

picture, sound and Ambilight settings.

1 Press MENU on the remote control and

select [TV menu] > [TV Settings] >

[Settings assistant].

5 Press OPTION to exit the menu.

2 Press to enter.

3 Press OK to [Start now].

4 Press the green key on the remote control

to start the assistant.

5 Press or to select the left or right side

to make your choice.

6 Press the green key to go to the next

setting.

» You will go through several settings.

When ﬁnished, you will be prompted

to store these settings.

To display or hide the clock

1 In the [Quick access] menu, select

[Clock] and press OK to display the clock

permanently.

7 Press the green key to store all your

settings.

Quick access

Audio language

Subtitle language

Subtitle

Picture format

Equalizer

Adjust picture settings

This section describes how to adjust picture

settings.

1 Press MENU on the remote control and

select [TV menu] > [TV Settings] >

[Picture].

Clock

2 Press OPTION and press

to select

[Clock] again.

3 Press OK to hide the clock.

Adjust picture and sound

settings

This section describes how to adjust picture

and sound settings.

20 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

•

[B-WP] (Blue White Point)

[R-BL] (Red Black Level)

[G-BL] (Green Black Level)

TV settings

Picture

Settings assistant

Reset smart settings

Picture

Sound

Ambilight

Contrast

Brightness

Colour

Hue

Sharpness

Tint

Pixel Plus

HD Natural Motion

Dynamic contrast

Noise reduction

MPEG artefact reduction

Colour enhancement

Active Control

Light sensor

Picture format

•

[Pixel Plus] Enables or disables Pixel

Plus HD, which ﬁne tunes each pixel

to match surrounding pixels.This

produces a brilliant high deﬁnition

image.

[HD Natural Motion] Reduces the

ﬁeld and line ﬂicker and reproduces

smooth movement especially in

movies. Set the level to Maximum,

Minimum or Off.

[Dynamic contrast] Enhances the

contrast in the picture as the image

on the screen changes. Set the level to

Minimum, Medium, Maximum or Off.

Medium is recommended.

[Noise reduction] Filters and reduces

the noise in the picture. Set the level

to Minimum, Medium, Maximum or

Off.

•

[MPEG artefact reduction]

Smoothens the transitions on digital

pictures. Switches MPEG artefact

reduction On or Off.

[Colour enhancement] Makes

colours more vivid and improves the

resolution of details in bright colours.

Set the level to Minimum, Medium,

Maximum or Off.

[Active Control] Corrects all

incoming signals to provide the best

picture possible. Switches Active

control On or Off.

[Light sensor] Adjusts picture and

Ambilight settings to match lighting

conditions in the room. Switches Light

sensor On or Off.

2 Press to enter the list.

3 Press

to select a setting:

•

[Contrast] Changes the level of bright

parts in the picture keeping the dark

parts unchanged.

•

[Brightness] Changes the level of light

in the picture.

[Colour] Changes the level of

saturation.

[Hue] If NTSC is broadcast, this level

compensates the colour variations.

[Sharpness] Changes the level of

sharpness of ﬁne details.

[Tint] Sets the colours to [Normal],

[Warm] (reddish) or [Cool] (bluish).

Select [Custom] to make a setting of

your own.

•

[Picture format] Change the picture

format to suit your content.

•

[Custom] tint. If [Custom] is selected

in theTint menu, follow the on-screen

instructions to change the value of:

Use smart settings

Apart from manually adjusting picture settings,

you can use smart settings to set yourTV to a

predeﬁned picture, sound and Ambilight setting.

•

[R-WP] (Red White Point)

•

[G-WP] (Green White Point)

EN 21

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Press MENU on the remote control and

select [TV menu] > [TV Settings] >

[Reset smart settings].

2 Press to enter the list.

3 Press or to select one of the following

settings:

•

[Current]

Applies manually selected picture,

sound and Ambilight settings.

[Standard]

Applies natural picture, sound and

Ambilight settings suitable for most

living room conditions.

[Vivid]

Applies brilliant picture, sound and

Ambilight settings suitable for bright

surroundings.

•

Enlarges the picture automatically to

ﬁll the screen. Subtitles remain visible.

Note

•

• We recommend you use [Auto format] for minimal

screen distortion.

[Movie]

•

[Super zoom] (Not for HD)

Applies dynamic picture, sound and

Ambilight settings suitable for a

complete cinematic experience.

4 Press the green key to store your

selection.

Change picture format

Change the picture format to suit your content.

1 Press

Picture format on your remote

control.Alternatively, press MENU and

select [TV menu] > [TV Settings] >

[Picture] > [Picture format].

Removes the black bars on the side of

4:3 broadcasts with minimal distortion.

[4:3] (Not for HD)

•

2 Press or to select one of the following

picture formats:

•

[Auto format] (Not for PC)

Displays the classic 4:3 format.

22 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

• Constant use of the [4:3] picture format can cause

screen distortion.We recommend you use [Auto

format].

•

[Movie expand 14:9] (Not for HD)

Stretches the classic 4:3 format to

16:9

•

[Unscaled] (Only for HD and PC)

Scales the classic 4:3 format to 14:9.

Note

• Constant use of the 14:9 picture format can cause

screen distortion.We recommend you use [Auto

format].

Maximum sharpness though distortion may

appear on borders.Also, black bars may appear

with pictures from your PC.

•

[Movie expand 16:9] (Not for HD)

Adjust sound settings

This section describes how to adjust sound

settings.

1 Press MENU on the remote control and

select [TV menu] > [TV Settings] >

[Sound].

2 Press to enter the list.

Scales the classic 4:3 format to 16:9.

•

[Wide screen]

EN 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Sets the balance of the left and right

speakers to best ﬁt your listening position.

[Audio language]

Lists audio languages available for a digital

channel (unavailable on analogue channels).

[Dual I-II]

If available, choose between two different

languages.

[Mono/Stereo]

If stereo broadcasting is available, choose

between mono or stereo.

[Surround mode]

If surround sound (Virtual Dolby

Surround) is available, enable it for more

spatial sound.

TV settings

Sound

•

Settings assistant

Reset smart settings

Picture

Sound

Ambilight

Equalizer

Volume

Balance

Audio language

Dual I/II

Mono/Stereo

Surround mode

Headphone volume

Auto volume leveling

Delta volume

Auto surround

•

[Headphone volume]

Changes the volume of your headphones.

Note

3 Press or to select one of the following

• When headphones are connected, press the Mute

button on the remote control to mute audio from the

TV speakers. Pressing Volume +/- buttons un-mutes

theTV speakers.

settings:

•

[Equalizer]

Changes the bass and treble of the sound.

Select each bar to change a setting.

Alternatively, press the colour keys to

select a pre-deﬁned equaliszer setting:

•

[Automatic volume leveling]

Reduces sudden volume changes, for

example, during commercials or when

switching from one channel to another.

Select [On] or [Off].

•

[Standard]

Equaliszer set to neutral.

[Speech]

•

Equaliszer settings maximiszed for

speech-based audio.

[Multimedia]

Settings maximiszed for different

audio types.

•

[Delta volume]

Levels out volume differences between

channels or connected devices.You must

switch to the connected device before

changing the Delta volume.

•

[Music]

[Auto surround]

Settings maximiszed for music.

[Volume]

Changes the volume.

Automatically switches theTV to the best

surround sound mode available from a

broadcast. Select [On] or [Off].

•

Tip

Adjust Ambilight settings

• To enable or disable the volume bar that appears

when you change the volume, press MENU on the

remote control and select [TV menu] > [Installation]

> [Preferences]. Press to enter the list and select

volume bar [On] or [Off].

1 ^{Press MENU on the remote control and}

select [TV menu] > [TV Settings] >

[Ambilight].

2 Press to enter the list.

•

[Balance]

24 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution

TV settings

Ambilight

• To avoid poor remote control reception, do not place

remote control sensors on your devices in range of

Ambilight.

Settings assistant Ambilight

Brightness

Mode

Reset smart settings

Picture

Sound

Ambilight

Colour

Separation

Balance

Enable Ambilight whenTV is in

standby mode

When theTV is in standby mode, you can

switch on Ambilight to enhance the ambience

of your room.Ambilight is only available as

constant colour in this mode.

3 Press or to select one of the following

settings:

•

[Ambilight]

Switches Ambilight [On] or [Off].

[Brightness]

Changes the light output of Ambilight.

[Mode]

Choose from four Ambilight modes:

[Colour], [Relaxed], [Moderate],

[Dynamic].

1 Press AMBILIGHT on the remote control

•

[Colour]

when theTV is in standby.

Select a pre-deﬁned colour setting ([Warm

white], [Cool white], [Blue]) or make a

custom colour of your own.

When making a custom colour, select

[Saturation] ﬁrst, setting the value high.

Then select [Palette] and choose a value

between 0 to 100.

2 Press MODE repeatedly to select an

available colour.

Adjust LightGuide brightness

•

[Separation]

1 ^{Press MENU on the remote control}

and select [TV menu] > [Installation] >

[Preferences] > [LightGuide brightness].

Sets the level of Ambilight colour on the

left and right side of theTV. [Maximum],

[Medium], [Minimum] and [Off] levels

are available.When [Off] is selected, only

mono colour Ambilight is displayed.

[Balance]

2 Press to enter the [LightGuide

brightness] menu.

3 Use or to select the LightGuide

brightness:

Sets the level of Ambilight on the left and

right side of theTV.

•

[0]: Off

[1]: 25%

[2]: 50%

[3]: 75%

[4]: Full

4 Press OK to conﬁrm.

5 Press MENU to exit.

EN 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Change to Shop or Home

mode

1 ^{Press MENU on the remote control}

and select [TV menu] > [Installation] >

[Preferences] > [Location].

2 Press to enter the Location menu.

3 Use or to select theTV mode:

•

[Shop]

Sets smart settings to [Vivid], ideal for

a shop environment.The ﬂexibility to

change settings is limited.

[Home]

Gives home users the full ﬂexibility to

change allTV settings.

» TheT.O.P. overview appears.

or to select a subject.

•

3 Use

4 Press OK to view the page.

4 Press OK to conﬁrm.

Use dual screen teletext

5 Press MENU to exit.

Enabling dual screen teletext displays your

channel or source on the left of the screen.

Teletext is displayed on the right.

Use advanced teletext

features

1 Press Dual Screen on your remote

control to enable dual screen teletext.

2 Press Dual Screen again to display

YourTV has a 1,200- page memory that stores

broadcasted teletext pages and subpages.The

teletext memory reduces page loading time.

normal teletext.

3 Press Teletext to switch off teletext.

Search teletext

Select teletext subpages

Quickly jump to a subject linked to a series of

page numbers or search for speciﬁc words in

teletext pages.

A teletext page can hold several subpages.

Subpages are displayed on a bar next to the

main page number.

1 Press Teletext on the remote control.

2 Select a teletext page.

2 Press OK to highlight the ﬁrst word or

number.

3 Press or to select a subpage.

3 Press

to jump to the next word

or number on the page.

SelectT.O.P. teletext broadcasts

4 Press OK to search a page which holds the

Table Of Pages (T.O.P.) teletext broadcasts

allow you to jump from one subject to another

without using page numbers.T.O.P. teletext is

not broadcast on allTV channels.

highlighted word or number.

5 Press until no word or number is

highlighted to exit [Search].

1 Press Teletext on the remote control.

2 Press INFO.

26 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Hide or reveal hidden information on

a page, such as solutions to riddles or

puzzles.

Enlarge teletext pages

For more comfortable reading, you can enlarge

the teletext page.

•

[Cycle subpages]

1 Press Teletext on the remote control

If subpages are available for the

selected page, you can cycle subpages

automatically.

and select a teletext page.

2 Press OPTION on the remote control to

[Language]

enlarge the top part of the page.

Some languages use a different set of

characters. If using a different language,

switch to the appropriate language

group to display the text correctly.

4 Press OK to change an option:

5 Press MENU to exit [TELETEXT MENU]

menu.

6 Press Teletext to switch off teletext.

3 Press OPTION again to view the enlarged

Use digital text services (UK only)

lower part of the page.

4 Press or to scroll through the

Some digitalTV broadcasters in UK offer

dedicated digital text or interactive services

(for example, BBC1).These services work like

normal teletext with the addition of number,

colour and navigation keys.

enlarged page.

5 Press OPTION again to return to the

normal page size.

1 Press Teletext on the remote control.

Use the teletext menu

2 Press

to select or highlight

With the options in the teletext menu you

can reveal hidden information, cycle subpages

automatically and change the character setting.

items.

3 Press one of the colour keys to select an

option.

1 Press

Teletext on the remote control.

4 Press OK to conﬁrm or activate.

2 Press MENU.The [TELETEXT MENU]

5 Press MHEG CANCEL to cancel digital

menu appears.

text or interactive services.

Digital text services are blocked when subtitles

are broadcasted and [Subtitle On] is set in the

[Features]menu (see ‘Use subtitles’ on page 32).

Teletext menu

Reveal

Off

Cycle subpages

Language

Off

Gr. II

UseTeletext 2.5

If broadcasted by theTV channel,Teletext 2.5

offers more colours and better graphics than

normal teletext.Teletext 2.5 is switched on by

default.

3 Press or to select an option.

•

[Reveal]

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Preferences] > [Teletext 2.5].

EN 27

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup a favourite list

2 Press to enter the list.

3 Select [On] or [Off].

1 Press OK on the remote control.

» The last selected list appears.

4 Press OK to change the option.

2 Press the red key to show all favourite lists.

3 Press or to select a list.

4 Press OK.

Create favourite lists

5 Press the green key to enter [Edit list]

Use the [All channels] list or setup a favourite

list of your own with preferredTV channels and

radio stations. Each member of your family can

create his or her own favourite list.

mode.

» The selected list displays a full channel

list.

6 Press or to highlight a channel.

Select a favourite list

7 Press OK to mark (or unmark) the

highlighted channel.

» The channel is added to (or removed

from) the selected list.

1 Press OK on the remote control.

Alternatively, press MENU and select

[Channel list].

» If this is new installation, the [All

channels] list is displayed.

8 Press the green key again to exit [Edit list]

mode.

» The modiﬁed channel list appears

again.

All channels

....

EXT 3

HDMI ...

1 Analogue channel 1

2 Digital channel 1

3 Digital channel 2

4 Radio channel 1

....

Select a channel from a favourite list

1 Press OK on the remote control.The last

selected channel list appears.

2 Use or to highlight a channel.

3 Press OK.TheTV tunes to that channel.

Select list

» If this is not a new installation, the last

selected favourite list appears.

2 Press the red key to display all favourite

lists.

3 Press or to select a list.

4 Press OK.

» The selected favourite list appears.

5 Press OK again to exit.

28 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Switch on EPG

Tip

Note

• The ﬁrst time you use EPG, you may be prompted

to perform an update. If so, follow the on-screen

instructions.

1 Press GUIDE on the remote control.

• Press - P + on the remote control to scan channels in

your selected list.You can select channels not in your list

by pressing the number keys.

Use the Electronic

Programme Guide

Alternatively, press MENU and select

[Programme guide].

The following EPG types appear:

EPG is an on-screen guide that displays

scheduled digitalTV programs.This guide is

not available with analogue channels.You can

navigate, select and view programs by time, title

or genre.

•

[Now and Next]

Detailed information about the

current programme is displayed.

26 BBC1

Tue., 12 Sep

09:17

There are two types of EPG, [Now and Next]

and [7 or 8 day] EPG. [Now and Next] is

always available but the [7 or 8 day] EPG is only

available in certain countries.

Title : Commonwealth Games

Info: 7:50 - 12:30 : 280 min

..........

With the EPG menu you can:

•

View a list of currently broadcast digital

programs

Exit

Press -P+ to change channel.

•

View upcoming programs

Group programs by genre

Set reminders when programs start

Setup preferred EPG channels

•

[7 or 8 day]

It may take some time to receive [7

or 8 day] EPG data.When loaded, a

list ofTV programs is displayed.

EN 29

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Press or to select a menu option.

4 Press to enter.

Programme guide

Around

Tue., 12 Sep

09:55

BBC ONE 07:50 Commonwealth

BBCTWO 09:50 Tweenies

12:30 Commonwealth

10:15 Something Special

10:30 Trisha Goddard

12:00 This is BBCTHREE

12:00 This is BBC FOUR

10:15 Daddio

5 Press or to make a selection.

five

09:00 TheWright Stuff

6 Press OK or the green key to activate the

BBCTHREE 05:32 This is BBCTHREE

BBC FOUR 05:32 This is BBC FOUR

selection.

7 Press GUIDE to exit the EPG.

abc1

09:20 Moonlighting

Remind Watch

13:50 Anastasia

Jump to ...

Info

0010 - EEN

Note

• Only channels marked as preferred EPG channels

appear in the [Programme guide] menu.

2 Use the colour keys on the remote control

to activate available actions:

•

[Next]

Displays information about the next

programme.

•

[Remind]

Marks a programme as a reminder.

[Watch]

Use timers and Child lock

This section describes how to switch theTV on

Watch or listen to a current

programme.

or off at a speciﬁed time and to use Child lock.

•

[Jump to...]

Jumps to the next or previous day.

[Info]

Automatically switch theTV to

standby (Sleeptimer)

If available, displays information about

a selected programme.

Sleeptimer switches theTV to standby after a

deﬁned period of time.

3 Press GUIDE to exit the EPG.

1 Press MENU on the remote control

and select [TV menu] > [Features] >

[Sleeptimer].

More on ‘7 or 8 day’ EPG

2 Press to enter the [Sleeptimer] bar.

Searching by genre, scheduling reminders

and more features are available through the

[Programme guide] menu.

3 Press or to set the sleep time.

» This can be up to 180 minutes in steps

of ﬁve minutes. If set to zero minutes,

the Sleeptimer is switched off.

1 Press GUIDE on the remote control.

2 Press MENU on the remote control.The

4 Press OK to activate the Sleeptimer.

[Programme guide] menu appears.

Note

Programme guide What's on

• You can always switch off yourTV earlier or reset

Sleeptimer during the countdown.

What's on

12:30 SouthToday

11:50Working Lunch

11:55 Melrose Place

13:00 In aller Freund

Search by genre

Scheduled remind...

Preferred EPG ch...

Acquire EPG data

Automatically switch theTV on (On

timer)

On timer switches theTV to a speciﬁed channel

at a speciﬁed time, from standby.

30 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

To lock or unlock all channels and

connected devices

1 Press MENU on the remote control and

select [TV menu] > [Features] > [On

timer].

1 In the [Child lock] menu, select [Lock] or

2 Press to enter the [On timer] menu.

[Unlock].

3 Use

to select and enter the

2 Press OK.

menu items to set a channel, day of the

week, frequency and starting time.

To lock a programme or all channels

from a certain time

4 Press OK to conﬁrm.

5 Press MENU to exit.

1 In the [Child lock] menu, select [Custom

Tip

lock].

• To switch off [On timer], select [Off] in the [On timer]

menu.

Child lock

Custom lock

Lock

Lock after

Custom lock

Unlock

Channel lock

Parental rating

LockTV channels or connected

devices (Child lock)

LockTV channels or connected devices with

a four- digit code to prevent children from

watching unauthoriszed content.

2 Press to enter the [Custom lock] menu.

3 Press again to enter the [Lock after]

menu.

4 Select [On] to enable the [Timer lock].

To set or change the Child lock code

5 Press

1 Press MENU on the remote control and

select [TV menu] > [Features] > [Set

code]/[Change code].

6 Select [Time].

7 Press

8 Enter the time with or and

2 Press to enter the code setup.

9 Press OK.

3 Enter your code with the number keys.The

[Features] menu reappears with a message

conﬁrming that your code is created or

changed.

To lock one or more channels and

connected devices

Tip

1 In the [Child lock] menu, select [Custom

lock].

• If you forget your code, enter ‘8888’ to override any

existing codes.

2 Press to enter.

3 Press or to select [Channel lock].

4 Press

To enter the Child lock menu

5 Press or to select the channel or

device you want to lock or unlock.

1 Press MENU on the remote control and

select [TV menu] > [Features] > [Child

lock] and press to enter your code.

6 At each selection, press OK to lock or

unlock the channel or device.

2 Enter your code with the number keys.

EN 31

Download from Www.Somanuals.com. All Manuals Search And Download.

To set parental ratings

TV menu

Features

Some digital broadcasters rate their

programmes according to age.You can set your

TV to display only programmes with age ratings

higher than your child’s.

TV settings

Features

Installation

Software update

Subtitle

Subtitle language

Sleeptimer

1 In the [Child lock] menu, select [Custom

Child lock

lock].

2 Press to enter.

Set/Change code

On timer

Common interface

Demo

3 Press or to select [Parental rating].

4 Press

5 Press or to select an age rating.

6 Press MENU to exit the [Child lock]

menu.

7 Press or to select [On] to display

subtitles always or [On during mute] to

display subtitles only when the sound is

muted with the key on the remote

control.

Use subtitles

You can enable subtitles for eachTV channel.

Subtitles are broadcast via teletext or DVB-

T digital broadcasts.With digital broadcasts,

you have the additional option of selecting a

preferred subtitle language.

8 Press OK to return to the [Features]

menu.

Note

• You must repeat this procedure to enable subtitles on

each analogue channel.

Enable subtitles on analogueTV

channels

1 Select an analogueTV channel.

Enable subtitles on digitalTV channels

2 Press Teletext on the remote control.

1 Press MENU on the remote control

and select [TV menu] > [Features] >

[Subtitle].

3 Enter the three- digit page number of the

subtitle page.

4 Press Teletext to switch off teletext.

2 Press to enter the list.

5 Press MENU on the remote control

and select [TV menu] > [Features] >

[Subtitle].

6 Press to enter the list.

32 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

View photos and listen to

music

TV menu

Features

TV settings

Features

Installation

Software update

Subtitle

Subtitle language

Sleeptimer

Child lock

Set/Change code

On timer

Connect an external USB storage device and

view pictures (JPEG format only) or listen to

music (MP3 or Linear PCM formats only).

Note

• Philips will not be held responsible if your USB storage

device is not supported nor shall Philips accept any

liability for damage or loss of stored data.

Common interface

Demo

Connect a USB storage device

3 Press or to select [On] to display

subtitles always or [On during mute] to

display subtitles only when the sound is

muted with the key on the remote

control.

While yourTV is on, connect your USB storage

device to the USB port on the side of your

TV (see ‘Connect devices’ on page 41).The

main menu appears automatically and the

name of the USB device is highlighted next to

[Multimedia].

4 Press OK to return to the [Features]

menu.

Select a subtitle language on digitalTV

channels

Television

TV menu

Channel list

Programme guide

Note

• When you select a subtitle language on a digitalTV

channel as described below, the preferred subtitle

language set in the [Installation] menu is temporarily

overruled.

Multimedia

1 Press MENU on the remote control and

select [TV menu] > [Features] > [Subtitle

language].

Disconnect a USB storage device

Caution

2 Press to enter the list of available

• To avoid damaging your USB device, always follow the

procedure described below when disconnecting.

languages.

3 Press or to select a subtitle language.

1 Press MENU on the remote control to

4 Press OK.

exit the [Multimedia] menu.

2 Wait ﬁve seconds before disconnecting the

USB device.

EN 33

Download from Www.Somanuals.com. All Manuals Search And Download.

corresponding function shown at the

bottom of the screen.

View your photos

1 After connecting your USB storage

device to theTV, press to enter the

[Multimedia] menu. [Picture] is highlighted.

7 Press the blue key to stop the show and

to see more functions. If the function bar

at the bottom disappears, press any colour

key to make it reappear.

USB

Picture

Music

Picture

Afrika_2001

8 Press and select another picture or

another album.

Paris_2006

My_car.jpg

Jean.jpg

Slide show settings

•

[No details]/[More details]

Displays the picture name, date, size and

next picture in the slide show.

[Transitions]

Mary.jpg

•

2 Press to enter the [Picture] folder.

Displays the list of available transition styles

of the pictures. Press or to select and

press OK to activate.

Picture

Afrika_2001

•

[Slide time]

Kenya.jpg

Congo.jpg

Victoria.jpg

Dakar.jpg

Cairo.jpg

Sets the time lag for picture transitions:

[Short], [Medium] or [Long].

[Rotate]

Rotates a picture.

[Zoom]

Paris_2005

My_car.jpg

Jean.jpg

•

Displays a list of available zoom

magniﬁcations.

Mary.jpg

•

[Start show]/[Stop show]

Starts or stops a slide show.

3 Press or to select a picture or a

picture album on the USB device.

View pictures as thumbnails

Afrika_2001

Thumbnails allow you to view picture albums in

an overview format.

Kenya.jpg

Congo.jpg

Victoria.jpg

Dakar.jpg

Cairo.jpg

1 Select a picture album.

2 Press to enter the picture list.

3 Press the green key.

Kenya.jpg

4 Press or

or to highlight a picture.

5 Press OK to view the picture.

4 Press OK to view the picture or to start a

6 Press to return to the thumbnail

slide show of the pictures in the album.

overview.

5 Press OK to pause the slide show. Press

7 Press the green key again to go back to the

OK again to restart.

picture list.

6 Press one of the colour keys on

the remote control to perform the

34 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Listen to music

Update yourTV software

1 After connecting your USB storage

device to theTV, press to enter the

[Multimedia] menu.

Philips continuously tries to improve its

products and we strongly recommend that

you update theTV software when updates are

available. Check www.philips.com/support for

availability.

2 Select [Music] then press to enter the

[Music] folder.

3 Press or to select a song or a music

album.

Check your current software version

4 Press OK to play the selected song or

1 Press MENU on the remote control and

select [TV menu] > [Software update] >

[Current software info].

album.

Music settings

•

[No details]/[More details]

Displays the ﬁle name.

[Repeat: one]/[Repeat: all]

Repeat a song or an album.

[Shufﬂe]

Check if software updates are

available

Philips periodically transmits messages via digital

broadcast, announcing when software updates

are available:

Play songs in a random sequence.

1 Press MENU on the remote control and

select [TV menu] > [Software update] >

[Announcement].

View a slide show with music

You can view a slide show of your stored

pictures with background music.

Update software (digital broadcasts)

1 Select an album of songs ﬁrst then press

OK.

If using (DVB-T) digital broadcasts, yourTV

automatically receives software updates. If you

receive a message on-screen prompting you to

update your software:

2 Select an album to display then press OK.

•

Select [Now] (recommended) to update

the software immediately.

Select [Later] to be reminded to update

the software later.

Select [Cancel] to exit the update (not

recommended). If you cancel the update,

manually update the software by pressing

MENU and selecting [TV menu] >

[Software update] > [Local updates].

Follow the on-screen instructions.

Listen to digital radio

channels

If digital broadcasting is available, digital radio

channels are installed automatically during

installation.You can reorder digital radio

channels after installation (see ‘Rearrange

channels’ on page 39).

1 Press OK on the remote control.The [All

channels] menu is displayed.

2 Use the number keys to select a radio

Update software (analogue

broadcasts)

channel.

3 Press OK.

Before performing this procedure be sure to:

EN 35

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Set aside some time to complete the

entire update.

Have available a USB storage device with

at least 64MB of storage space.

Have access to a computer with a USB

port and internet access.

1 Press MENU on the remote control and

select [TV menu] > [Software update] >

[Update assistant].

2 Select [Start now].

3 Insert the USB storage device and press

the green key.An ID ﬁle is copied to the

USB device.

4 Press the green key to ﬁnish.

5 Connect the USB storage device to your

computer.

6 In your computer, browse to the USB

storage device and double-click the

‘Update’ HTML ﬁle.

7 Follow the on-screen instructions to

complete the update.

36 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Press to enter the [Languages] menu.

3 Press or to select your language.

4 Press OK to conﬁrm.

7 Install channels

The ﬁrst time you setup yourTV, you will be

prompted to select an appropriate menu

language and to perform automatic installation

of allTV and digital radio channels (if available).

This chapter provides instructions on how to

reinstall channels as well as other useful channel

installation features.

5 Press to return to the [Installation]

menu.

In addition to menu language, you can

conﬁgure the following language settings

via the [Languages] menu (digital channels

only):

•

[Preferred audio]

Select one of the available audio languages

as your preferred audio language (see

‘Adjust sound settings’ on page 23).

[Preferred subtitles]

Select one of the available subtitle

languages (see ‘Select a subtitle language

on digitalTV channels’ on page 33).

[Hearing impaired]

Note

• Re-installing channels modiﬁes the [All channels] list.

Automatically install channels

If available, select [On] to display the

hearing impaired version of your preferred

audio or subtitle language.

This section describes how to search and store

channels automatically. Instructions are for both

digital and analogue channels.

Step 2 Select your country

Step 1 Select your menu language

Note

Select the country where you are located.The

TV installs and arranges channels according to

your country.

• Skip to Step 3 if your language settings are correct.

Note

• Skip to Step 3 if your country settings are correct.

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Languages].

1 In the [Installation] menu, press to

select [Country].

Installation

Languages

2 Press to enter the list.

Languages

Country

Menu language

3 Press or to select your country.

4 Press to return to the [Installation]

Preferred audio

Preferred subtitles

Hearing impaired

menu.

Time zone

Channel install...

Preferences

Connections

…

Step 3 Select your time zone

This option is only available for countries with

different time zones. Skip this step if it is not

applicable.

EN 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1 Select your system

Note

1 In the [Installation] menu, press to

select [Time zone].

2 Press to enter the list.

• Skip to Step 2 if your system settings are correct.

3 Press or to select your time zone.

4 Press to return to the [Installation]

menu.

1 Press MENU on the remote control

and select [TV menu] > [Installation]

> [Channel installation] > [Analogue:

Manual installation].

Step 4 Install channels

YourTV searches and stores all available digital

and analogueTV channels as well as all available

digital radio channels.

Channel install...

Analogue: Manual...

Automatic install... System

Installation update Search

1 In the [Installation] menu, press to

select [Channel installation].

2 Press to enter the [Channel installation]

menu. [Automatic installation] is

highlighted.

Digital:Test recept...

Analogue: Manual...

Rearrange

Fine tune

Store current ch...

Store as new ch...

3 Press to select [Start now].

4 Press OK.

2 Press to enter the [Channel installation]

5 Press the green key to start.The installation

menu. [System] is highlighted.

may take a few minutes.

3 Press to enter the [System] list.

6 When the channel search is completed,

press the red key to return to the

[Installation].

4 Press or to select your country or

region.

5 Press to return to the [Channel

7 Press MENU to exit.

installation] menu.

Tip

Step 2: Search and store newTV

channels

• When digitalTV channels are found, the list of installed

channels may display empty channel numbers.You

can rename, reorder or uninstall stored channels (see

‘Rearrange channels’ on page 999).

1 Press MENU on the remote control

and select [TV menu] > [Installation]

> [Channel installation] > [Analogue:

Manual installation] > [Search].

2 Press to enter the [Search] menu.

Manually install channels

3 Press the red key and use the number keys

on the remote control to manually enter

the three digit frequency.Alternatively,

press the green key to automatically search

for the next channel.

This section describes how to search and store

analogueTV channels manually.

4 Press when the new channel is found.

5 Select [Store as new channel] to store the

new channel under a new channel number.

38 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Press to enter.

Tip

7 Press OK. [Done] appears.

8 Press MENU to exit.

• Delete all characters by pressing the yellow key. Delete

only the highlighted character by pressing the blue key.

Fine tune analogue channels

You can manually ﬁne tune analogue channels

when reception is poor.

Uninstall or reinstall channels

1 Press MENU on the remote control

and select [TV menu] > [Installation]

> [Channel installation] > [Analogue:

Manual installation] > [Fine tune].

You can uninstall a stored channel or reinstall an

uninstalled channel.

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Channel installation] > [Rearrange].

2 Press to enter the [Fine tune] menu.

3 Press or to adjust the frequency

4 Press when done.

2 Press to enter the [Rearrange] list.

3 Press or to select the channel you

5 Select [Store current channel] to store

the ﬁne tuned channel under the current

channel number.

want to uninstall or reinstall.

4 Press the green key to uninstall or reinstall

the channel.

6 Press to enter.

5 Press MENU to exit.

7 Press OK. [Done] appears.

8 Press MENU to exit.

Rearrange channels

1 ^{Press MENU on the remote control}

and select [TV menu] > [Installation] >

[Channel installation] > [Rearrange].

Rename channels

1 ^{Press MENU on the remote control}

and select [TV menu] > [Installation] >

[Channel installation] > [Rearrange].

2 Press to enter the [Rearrange] list.

3 Press or to select the channel you

2 Press to enter the [Rearrange] list.

want to rearrange.

3 Press or in the [Rearrange] list to

4 Press the yellow key to move the channel

up the list or press the blue key to move

the channel down the list.

select the channel you want to rename.

4 Press the red key.

5 Press MENU to exit.

5 Press and to select characters or

and to change the characters. Space,

numbers (0-9) and other special characters

are located between z and A.

Manually update the channel

list

6 Press the green key or OK to ﬁnish.

If yourTV is in standby mode, an update is

performed every morning.This update matches

channels stored in your channel list with those

available from your broadcaster. If a channel is

EN 39

Download from Www.Somanuals.com. All Manuals Search And Download.

unavailable, it is automatically removed from the

channel list.

7 Press MENU to exit.

In addition to the automatic update, you can

manually update the channel list.

Note

• If you have further problems with the reception of your

digital broadcast, contact a specialiszed installer.

1 Press MENU on the remote control

and select [TV menu] > [Installation]

> [Channel installation] > [Installation

update].

2 Press to enter the [Installation update]

Start a demo

menu.

» [Start now] is highlighted.

1 ^{Press the red key on the remote control.}

Alternatively, press MENU on the remote

control and select [TV menu] > [Features]

> [Demo].

3 Press OK.

4 Press the green key to start the update.

» This may take a few minutes.

2 Press to enter the [Demo] menu.

3 Select a demo and press OK.

4 Press the red key to exit.

5 When the update is complete, press

the red key to return to the [Channel

installation] menu.

6 Press MENU to exit.

ResetTV to factory settings

Test digital reception

Resetting yourTV to factory settings restores

default picture and sound settings. Channel

installation settings remain the same.

If using digital broadcasts, you can check the

quality and signal strength of digital channels.

This allows you to reposition and test your

antenna or satellite dish.

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Factory settings].

1 Press MENU on the remote control

and select [TV menu] > [Installation]

> [Channel installation] > [Digital:Test

reception].

2 Press to enter the [Factory settings]

menu. [Reset] is highlighted.

3 Press OK to reset to factory settings.

2 Press to enter the [Digital:Test

4 Press MENU to exit.

reception] menu.

3 Press OK.

4 Press the green key to automatically start

the test or manually enter the frequency of

the channel you want to test.

» If the signal quality and strength is are

poor, reposition the antenna or satellite

dish and retest.

5 When complete, press the yellow key to

store the frequency.

6 Press the red key to return to the

[Channel installation] menu.

40 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

digital receivers, game consoles and other

component video devices.

8 Connect devices

d SPDIF OUT

SPDIF sound output connector for home

theatres and other audio systems.

Connection overview

4 3

SPDIF

EXT 2

EXT 1

EXT 3

OUT

SERV.U

(RGB/CVBS)

AUDIO OUT

AUDIO IN

75X

TVANTENNA

AUDIO IN:

LEFT / RIGHT

HDMI 1 / DVI

HDMI 2 / DVI

HDMI 3 / DVI

HDMI 3 HDMI 2 HDMI 1

e AUDIO OUT L/R

a EXT 1

Sound output cinch connectors for home

theatres or other audio systems.

First SCART connector for DVD players,

VCRs, digital receivers, game consoles and

other SCART devices. Supports Audio L/R,

CVBS in/out, RGB.

f TV ANTENNA

g HDMI 1/2/3

HDMI input connectors for Blu-ray Disc

players, digital receivers, game consoles and

other high-deﬁnition devices.

b EXT 2

Second SCART connector. Supports Audio

L/R, CVBS in/out, RGB.

c EXT 3

Component video (Y Pb Pr) and Audio

L/R input connectors for DVD players,

EN 41

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI - Highest quality

Note

• The number of HDMI connectors available may vary

according to yourTV model.

h AUDIO IN

Mini-jack connector for PC audio in (when

connecting a PC via a DVI-HDMI adaptor).

HDMI produces the best audio visual quality

possible. Both audio and video signals are

combined in one HDMI cable, providing an

uncompressed, digital interface between your

TV and HDMI devices.You must use HDMI to

experience full high-deﬁnition video.You must

also use HDMI cables to enable Philips EasyLink

(see ‘Use Philips EasyLink’ on page 47).

Side connectors

i Headphones

Stereo mini-jack.

j AUDIO L/R

Audio L/R input connectors for composite

and S-Video devices.

k VIDEO

Tip

Video input cinch connector for composite

• If your PC only has a DVI connector, use a DVI-HDMI

adaptor to connect your device to a HDMI connector

at the back of theTV.You must connect a separate

audio cable from the device to the AUDIO IN mini-jack

connector.

devices.

l S-VIDEO

S-Video input connector for S-Video

devices.

m USB

USB connector for storage devices.

Note

n HDMI

• Philips HDMI supports HDCP (Highbandwidth Digital

Contents Protection). HDCP is a form of Digital Rights

Management that protects high deﬁnition content in

DVD or Blu-ray Discs.

Additional HDMI connector for mobile

high-deﬁnition devices.

o COMMON INTERFACE

Slot for Conditional Access Modules.

Component (Y Pb Pr) - Higher quality

Component (Y Pb Pr) video provides better

picture quality than S-Video or composite

video connections.Though component video

supports high-deﬁnition signals, picture quality is

lower than HDMI and is analogue.

Select connection quality

This section describes how you can enhance

your audio visual experience by connecting

your devices with the best possible connectors.

After connecting your devices, be sure to

enable them (see ‘Setup devices’ on page 46).

When connecting a component video

cable, match the cable colours to the EXT 3

connectors on the back of theTV.Also, connect

a Audio L/R cable to the red and white Audio

L/R input connectors at EXT 3.

42 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

S-Video - Good quality

An analogue connection, S-Video provides

better picture quality than composite video.

When connecting your device with S-Video,

plug the S-Video cable to the S-Video

connector on the side of theTV.You must

connect a separate Audio L/R cable from

the device to the red and white Audio L/R

connectors on the side of theTV.

Component video cable - Red, Green, Blue

S-Video cable and Audio L/R cable (Red,White)

Composite - Basic quality

Composite video provides basic analogue

connectivity, usually combining a (yellow) video

cinch cable with (red and white) Audio L/R

cinch cable. Match the cable colours when

connecting to the compositeVideo and Audio

L/R input connectors on the side of theTV.

Audio L/R cable - Red,White

SCART - Good quality

Composite audio/video cable -Yellow, red and

white

SCART combines audio and video signals in

one cable.Audio signals are stereo, while video

signals can be composite or S-Video quality.

SCART does not support high-deﬁnition video

and is analogue.Two SCART connectors are

provided on theTV, EXT 1 and EXT 2.

Connect devices

This section describes how to connect

various devices with different connectors and

EN 43

Download from Www.Somanuals.com. All Manuals Search And Download.

supplements examples provided in the Quick

Start Guide.

Satellite receiver

To receive analogue channels via antenna

and digital channels via a satellite receiver,

connect an antenna cable and SCART cable as

illustrated:

Caution

• Disconnect the mains cord cable before connecting

devices.

Note

• Different types of connectors may be used to connect

a device to yourTV, depending on availability and your

needs.

Blu-ray disc player

For full high-deﬁnition video, connect a HDMI

cable as illustrated:

HDMI

OUT

SATELLITE RECEIVER

BLU-RAY DISC PLAYER

HD digital receiver

To receive analogue channels via antenna

and digital channels via a HD digital receiver,

connect two antenna cables and HDMI cable as

illustrated:

DVD player

For DVD video, connect a SCART cable as

illustrated:

HDMI

OUT

DVD Player

HD DIGITAL RECEIVER / HD SATELLITE RECEIVER

44 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Combined DVD recorder and digital

receiver

DVD recorder and home theatre

system

To receive analogue channels via antenna and

record programs on a combined DVD recorder

and digital receiver, connect two antenna cables

and one SCART cable as illustrated:

To receive analogue channels via antenna,

output sound to a home theatre system and

record programmes on a DVD recorder,

connect two antenna cables, one SCART cable

and two digital audio cables as illustrated:

OUT

DVD RECORDER

OUT

DVD RECORDER / DIGITAL RECEIVER

DIGITAL

AUDIO

HOME THEATRE

Separate DVD recorder and receiver

Note

• If using a home theatre or other audio system, the best

synchroniszation between images and sound is achieved

by connecting the audio signal from your playback

device to theTV ﬁrst. Subsequently, channel the audio

signal to the home theatre system or audio device via

the audio connectors on the back of theTV.

Game console or camcorder

The most practical connection for a mobile

game console or camcorder may be at the side

of theTV.You can, for example, connect the

game console or camcorder toVIDEO/S-Video

and AUDIO L/R connectors at the side of the

TV.A HDMI connector is also available for high-

deﬁnition devices.

OUT

RECEIVER/CABLE

BOX

OUT

DVD RECORDER

To receive analogue channels via antenna

and record programmes on a separate DVD

recorder and receiver, connect three antenna

cables and three SCART cables as illustrated:

EN 45

Download from Www.Somanuals.com. All Manuals Search And Download.

AUDIO-IN mini-jack connector’ on page

47).

Setup devices

When all devices are connected, you must

select the type of device attached to each

connector.

Assign devices to connectors

For easy selection and best signal handling,

assign the device connected to the connectors

on yourTV.

A permanent game console or camcorder can

be connected to a HDMI connector or EXT 3

(component) connectors at the back of theTV.

1 Press MENU on the remote control and

select [TV menu]TV menu > [Installation]I

nstallation > [Connections].

Personal computer

Connections

EXT 1

EXT 2

EXT 3

HDMI 1

HDMI 2

HDMI 3

Side

None

DVD

Blu-ray

HDD/DVDR

HD rec.

Game

VCR

Before connecting the PC:

2 Press to enter the list.

•

Set the PC monitor refresh rate to 60Hz.

Change theTV picture format to

[Unscaled].

3 Press or to select a connector.

4 Press to enter the list.

To connect a PC to the back of theTV

5 Press or to select the device attached

to the connector.

1 Using a HDMI to DVI cable or a HDMI-to-

DVI adaptor (attached to a HDMI cable),

connect a HDMI connector on the back of

yourTV to the DVI connector on your PC.

6 Press OK to select the device.

7 Repeat the procedure until all devices are

correctly assigned to connectors.

2 Connect an audio cable from your PC to

the AUDIO IN mini-jack connector at the

back of theTV.

8 Press MENU to exit.

3 Assign the AUDIO IN mini-jack connector

to the HDMI connector (see ‘Adding the

46 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding the AUDIO-IN mini-jack

connector

Use Philips EasyLink

YourTV supports Philips EasyLink, which

enables one-touch play and one-touch standby

between EasyLink-compliant devices. Compliant

devices must be connected to yourTV via

HDMI and assigned.

If you connect audio from a PC to the AUDIO

IN mini-jack connector at the back of theTV,

you must associate it to the HDMI connector.

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Connections] > [Audio In L/R].

Enable or disable Easylink

1 Press MENU on the remote control

then select [TV menu] > [Installation] >

[Preferences] > [EasyLink].

Connections

AUDIO IN L/R

None

...

HDMI 1

HDMI 2

HDMI 3

2 Select [On] or [Off].

EXT 3

HDMI 1

HDMI 2

HDMI 3

Side

Use one-touch play

1 After enabling EasyLink, press play on your

device.

» TheTV automatically switches to the

correct source.

AUDIO IN L/R

2 Press to enter the list.

Use one-touch standby

3 Press or to select the HDMI

1 Press and hold Standby on theTV or

device remote control for at least three

seconds.

connector used by the PC.

4 Press MENU to exit.

» TheTV and all connected HDMI

devices switch to standby.

Assign a channel decoder

Decoders that decode digital channels can be

connected to EXT 1 or EXT 2 (SCART).You

have to assign theTV channel as a channel to

be decoded.Then assign the connection where

the decoder is connected.

PrepareTV for digital services

Scrambled digitalTV channels can be decoded

with a Conditional Access Module (CAM) and

a Smart card provided by a digitalTV service

operator.

The CAM may enable several digital services,

depending on the operator and services you

choose (for example, payTV). Contact your

digitalTV service operator for more information

about services and terms.

1 Press MENU on the remote control

and select [TV menu] > [Installation] >

[Decoder] > [Channel].

2 Press to enter the list.

3 Press or to select the channel to

decode.

4 Press and go back to select [Status].

5 Press or to select the connector used

by the decoder.

6 Press MENU to exit.

EN 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Use the Conditional Access Module

3 Turn on theTV and wait for the CAM to

be activated.This may take several minutes.

Caution

Note

• Switch off yourTV before inserting a CAM. Be sure

to follow the instructions described below.Wrong

insertion of a CAM may damage both the CAM and

yourTV.

• Do not remove the CAM from the slot. Removing the

CAM will deactivate the digital services.

1 Following the directions printed on the

CAM, gently insert the CAM into the

Common Interface on the side of theTV.

Access CAM devices

1 After inserting and activating the CAM,

press MENU on the remote control

and select [TV menu] > [Features] >

[Common interface].

This menu option is only available if the CAM

is correctly inserted and activated. On-screen

applications and content are provided by your

digitalTV service operator.

2 Push the CAM in as far as it will go.

48 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote control

9 Technical

specifications

•

Type: RC4450

Batteries: 2 x AA size

Product speciﬁcations-

Connections (Rear)

Supported display resolutions

•

EXT 1 (SCART):Audio L/R, CVBS in/out,

RGB

Computer formats

•

EXT 2 (SCART):Audio L/R, CVBS in/out,

•

Resolution - refresh rate:

RGB

•

640 x 480 - 60Hz

800 x 600 - 60Hz

1024 x 768 - 60Hz

1920 x 1080i - 60Hz

1920 x 1080p - 60Hz

•

EXT 3: Component (Y Pb Pr),Audio L/R in

HDMI 1/2/3

Note

• The number of HDMI connectors available may vary

according to yourTV model.

Video formats

Resolution - refresh rate:

•

480i - 60Hz

480p - 60Hz

576i - 50Hz

576p - 50Hz

720p - 50Hz, 60Hz

1080i - 50Hz, 60Hz

1080p - 24Hz, 25Hz, 30Hz

1080p - 50Hz, 60Hz

•

SPDIF OUT: Digital audio out (coaxial

cinch-S/PDIF). Display synchroniszed.

AUDIO OUT L/R:Analogue audio out.

TV ANTENNA

AUDIO IN: Mini-jack audio in for PC DVI/

HDMI connections.

•

Connections (Side)

•

Headphone out (stereo mini-jack)

AUDIO L/R in

Video (CVBS) in

S-Video

USB

HDMI

Tuner/Reception/

Transmission

•

Antenna input: 75ohm coaxial (IEC75)

TV system: DVB COFDM 2K/8K

Video playback: NTSC, SECAM, PAL

DVBTerrestrial (see listed countries on the

back of theTV)

Common Interface (CAM slot)

Power

•

Mains power:AC 220-240V (±10%)

•

Power and standby power consumption:

See technical speciﬁcations at www.philips.

com

Ambient temperature: 5°C - 35°C

Speciﬁcations are subject to change

without notice. For detailed speciﬁcations

of this product go to www.philips.com/

support.

Multimedia

•

Connection: USB

Playback formats: MP3, Linear PCM, slide

show (.alb), JPEG

•

EN 49

Download from Www.Somanuals.com. All Manuals Search And Download.

TV channel issues

10 Troubleshooting

Previously installed channels do not appear in

the channel list:

This section describes commonly-encountered

issues and accompanying solutions.

•

Verify that the correct list is selected.

The channel may have been uninstalled

to the [Rearrange] menu.To access the

menu, press MENUon the remote control

and select [TV menu] > [Installation] >

[Channel installation] > [Rearrange].

GeneralTV issues

TheTV does not switch on:

No digital channels were found during the

installation:

Verify if theTV supports DVB-T in your country.

See the listed countries on the back of theTV.

•

Unplug the mains cable, wait for one

minute and plug into the mains again.

Verify that the mains cable is properly

connected and that the mains are

powered.

•

The remote control is not working properly:

Sound issues

•

Verify that the remote control batteries

are correctly inserted according to the

+/- orientation.

There is a picture but sound quality is poor:

•

Replace the remote control batteries if

they are ﬂat or weak.

Clean the remote control andTV sensor

lens.

Note

• If no audio signal is detected, theTV automatically

switches off audio output and does not indicate

malfunction.

The standby light on theTV blinks red:

•

Turn off theTV and unplug the mains

cable.Wait until theTV cools down before

reinserting the mains cord and turning on

theTV. If the blinking occurs again, contact

our Customer Support Centre.

•

Check that all cables are properly

connected.

Check that the volume is not set to 0.

Check that the sound is not muted.

•

There is picture but sound quality is poor:

Check [Sound] settings, verifying that [Stereo]

is selected and [Equalizer] settings are correct.

If needed, try resetting audio settings to

[Standard].

There is a picture but sound comes from one

speaker only:

Verify that [Balance] is correctly set.

You forgot your code to unlock Child lock

•

Enter ‘8888’ (see ‘LockTV channels or

connected devices (Child lock)’ on page

31).

TheTV menu is in the wrong language

•

Change theTV menu to your preferred

language (see ‘Step 1 Select your menu

language’ on page 37).

When turning theTV on/off/to standby, you

hear a creaking sound from theTV chassis:

•

No action is required.The creaking sound

is normal expansion and contraction of the

TV as it cools down and warms up.This

does not impact performance.

Picture issues

LightGuide is on, but there is no picture:

•

Verify if the antenna is connected properly.

Verify if the correct device is selected.

There is sound but no picture:

50 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Verify that picture settings are correctly set

(see ‘Adjust picture settings’ on page 20).

•

HDCP support can delay the time taken

for aTV to display content from a device.

If theTV does not recognise the device

and the screen does not display a picture,

try switching from one device to another

and back again to restart.

You receive poorTV reception from an

antenna connection:

•

Check that the antenna is properly

connected to theTV.

•

Loudspeakers, unearthed audio devices,

neon lights, high buildings or mountains can

inﬂuence the picture quality.Try to improve

the reception quality by changing the

antenna direction or moving devices away

from theTV.

Verify if the correctTV system is selected

for your region (see ‘Step 1 Select your

system’ on page 38).

•

If you experience intermittent sound

disruptions, check the user manual of the

HDMI device to verify that output settings

are correct.Alternatively, try connecting

the audio signal from the HDMI device to

theTV via AUDIO IN at the back of theTV.

If a HDMI-to-DVI adaptor or HDMI to DVI

cable is used, check that an additional audio

cable is connected to AUDIO IN.You must

also assign the audio connector.

•

If reception on only one channel is poor,

try to ﬁne tune this channel. (see ‘Fine tune

analogue channels’ on page 39)

You receive poor picture quality from

connected devices:

USB connection issues

•

Check that the devices are connected

properly.Also, be sure to assign devices

to connectors (see ‘Assign devices to

connectors’ on page 46). as described in

Section 7.4.1 Assign devices to connectors.

Verify that picture settings are correctly set

(see ‘Adjust picture settings’ on page 20).

TheTV does not display the USB device

content:

•

Set your device to ‘Mass Storage Class’

compliant, as described in your device

documentation.

•

Your USB device may not be compatible

with theTV.

Not all audio and picture ﬁles are

supported (see ‘Technical speciﬁcations’ on

page 49).

TheTV did not save my settings:

•

Verify that theTV is set to Home mode,

which offers you complete ﬂexibility to

change settings (see ‘Change to Shop or

Home mode’ on page 26).

Audio and picture ﬁles do not play or display

smoothly

The picture does not ﬁt the screen, it is too

big or too small:

•

The transfer performance of the USB

device may limit the transfer rate.

Try using a different picture format.

Assign your device to connectors (see

‘Assign devices to connectors’ on page 46).

PC connection issues

The picture position on screen is not correct:

Picture signals from some devices do not ﬁt the

screen correctly. Check the signal output of the

device.

The PC display on myTV is not stable or is

not synchronised:

Check that a supported resolution and refresh

rate is selected on your PC. (see ‘Technical

speciﬁcations’ on page 49)

HDMI connection issues

You encounter problems with HDMI devices

EN 51

Download from Www.Somanuals.com. All Manuals Search And Download.

If you cannot resolve your problem, refer to the

FAQ for thisTV at www.philips.com/support.

If the problem remains unresolved, contact the

Customer Support Centre in your country as

listed in this user manual.

Warning

• Do not attempt to repair theTV yourself.This may

cause severe injury, irreparable damage to yourTV or

void your warranty.

Note

• Please have yourTV model and serial number available

before contacting us.These numbers are available

on the back and side of yourTV, as well as on the

packaging.

52 EN

Download from Www.Somanuals.com. All Manuals Search And Download.

Document order number: 3139 125 40432

Download from Www.Somanuals.com. All Manuals Search And Download.

Philips CD Player CDR 795 User Manual
Philips CRT Television XS2757CI User Manual
Philips Electric Toothbrush HX6932 10 User Manual
Philips Iron GC4425 User Manual
Philips MP3 Docking Station DS9000 User Manual
Philips MP3 Player wk10295 User Manual
Philips Security Camera VCM8175 User Manual
Philips VCR VR302 User Manual
Philips Work Light P 2538 C User Manual
Pioneer Stereo System VSX 515 K User Manual