Philips Fan 42PFL7803D User Manual

Register your product and get support at  
Flat TV  
42PFL7803D  
52PFL7803D  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Koninklijke Philips Electronics  
N.V. manufactures and sells  
many products targeted at  
consumers, which, like any  
electronic apparatus, in general  
have the ability to emit and  
receive electromagnetic signals.  
(Available on selected models).  
2007 © Koninklijke Philips  
Electronics N.V.All rights  
reserved. Specications are  
subject to change without notice.  
Trademarks are the property of  
Koninklijke Philips Electronics N.V.  
or their respective owners.  
® Kensington and Micro Saver  
are registered US trademarks of  
ACCOWorld Corporation with  
issued registrations and pending  
applications in other countries  
throughout the world.All other  
registered and unregistered  
trademarks are the property of  
their respective owners.  
One of Philips’ leading  
Philips reserves the right to  
change products at any time  
without being obliged to adjust  
earlier supplies accordingly.  
Business Principles is to take  
all necessary health and safety  
measures for our products,  
to comply with all applicable  
legal requirements and to stay  
well within the EMF standards  
applicable at the time of  
The material in this manual  
is believed adequate for the  
intended use of the system. If  
the product, or its individual  
modules or procedures, are used  
for purposes other than those  
specied herein, conrmation of  
their validity and suitability must  
be obtained. Philips warrants  
that the material itself does not  
infringe any United States patents.  
No further warranty is expressed  
or implied.  
producing the products.  
Philips is committed to develop,  
produce and market products  
that cause no adverse health  
effects.  
Philips conrms that if its  
products are handled properly  
for their intended use, they  
are safe to use according to  
scientic evidence available  
today.  
Warranty  
No components are user-  
serviceable. Do not open or  
remove covers to the inside  
of the product. Repairs may  
only be done by Philips Service  
Centers and ofcial repair shops.  
Failure to do so shall void any  
warranty, stated or implied.Any  
operation expressly prohibited  
in this manual, any adjustments,  
or assembly procedures not  
recommended or authorized  
in this manual shall void the  
warranty.  
Philips plays an active role in the  
development of international  
EMF and safety standards,  
enabling Philips to anticipate  
further developments in  
standardization for early  
integration in its products.  
Copyright  
VESA, FDMI and the  
VESA Mounting Compliant  
logo are trademarks of the  
Video Electronics Standards  
Association.  
Pixel characteristics  
This LCD product has a high  
number of color pixels.Although  
it has effective pixels of 99,999%  
or more, black dots or bright  
points of light (red, green or  
blue) may appear constantly on  
the screen.This is a structural  
property of the display (within  
common industry standards) and  
is not a malfunction.  
Manufactured under license  
from BBE Sound, Inc. Licensed  
by BBE, Inc under one or more  
of the following US patents:  
5510752,5736897. BBE and  
BBE symbol are registered  
trademarks of BBE Sound Inc.  
Compliance with EMF  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7.  
Use yourTV . . . . . . . . . . . . . . . . . . 28  
Adjust TV settings . . . . . . . . . . . . . . . .28  
Change your picture format . . . . . . . .29  
Use Smart Mode settings. . . . . . . . . . .30  
Use the Surf feature. . . . . . . . . . . . . . .31  
Contents  
1.  
Important . . . . . . . . . . . . . . . . . . . . . 5  
2.  
Overview of television controls and  
connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Side controls . . . . . . . . . . . . . . . . . . . . .7  
Side connectors . . . . . . . . . . . . . . . . . . .7  
Rear connectors. . . . . . . . . . . . . . . . . . .7  
Position the TV. . . . . . . . . . . . . . . . . . . .8  
Install the remote control batteries . . .8  
Use the Source List . . . . . . . . . . . . . . . .8  
Wall-mount the TV . . . . . . . . . . . . . . . .9  
8.  
Use more of yourTV . . . . . . . . . . . 32  
Use the Advance Picture features . . . .32  
Use the Timer . . . . . . . . . . . . . . . . . . .33  
Child-lock the TV. . . . . . . . . . . . . . . . .34  
Control access to TV channels . . . . . .35  
Control access to TV programs. . . . . .37  
Turn on closed captions. . . . . . . . . . . .39  
Use the Demo modes . . . . . . . . . . . . .40  
Use Ambilight . . . . . . . . . . . . . . . . . . . .40  
3.  
Overview of remote control keys and  
functions . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
9.  
Use yourTV as a computer monitor  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Picture settings (VGA mode). . . . . . . .43  
Feature settings (VGA mode) . . . . . . .43  
4.  
Use yourTV in digital mode. . . . . . 13  
Get Started . . . . . . . . . . . . . . . . . . . . .13  
Switch on the TV for the first time . . .13  
Understand the information banner . .14  
Install channels . . . . . . . . . . . . . . . . . .14  
Set your preferences . . . . . . . . . . . . . .17  
Restoring to default settings . . . . . . . .18  
Control access to digital channels. . . .19  
Setup your favorite channels . . . . . . . .21  
Update your TV . . . . . . . . . . . . . . . . . .22  
Get program listings. . . . . . . . . . . . . . .23  
10. Use yourTV in High Definition mode  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Connect the HD equipment . . . . . . . .44  
Control the TV settings in HD mode .44  
Use Mode Selection . . . . . . . . . . . . . .44  
Use Native 1080 mode . . . . . . . . . . . .45  
Use Philips EasyLink. . . . . . . . . . . . . . .45  
11. Troubleshooting. . . . . . . . . . . . . . . . 46  
12. Specifications. . . . . . . . . . . . . . . . . . 48  
5.  
6.  
Use yourTV in analog mode . . . . . 24  
Select your location . . . . . . . . . . . . . . .24  
Install channels . . . . . . . . . . . . . . . . 25  
Automatically install channels . . . . . . .25  
Manually install channels . . . . . . . . . . .25  
Manage channels. . . . . . . . . . . . . . . . . .26  
13. Connect devices . . . . . . . . . . . . . . . 49  
Connection overview. . . . . . . . . . . . . .49  
Select connection quality. . . . . . . . . . .49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall mounting of the TV should only be  
performed by qualified personnel.The TV  
must only be mounted on an appropriate  
wall bracket and on a wall that can safely  
hold the weight of the TV. Improper wall  
mounting can result in severe injury or  
damage. Do not attempt to wall mount  
the TV yourself.  
1. Important  
Congratulations on your purchase and  
welcome to Philips! To fully benefit from  
the support that Philips offers, register your  
Read this user manual before you start to  
use this product.  
If the TV is mounted on a swivel base or  
swivel arm, ensure no strain is placed on  
the power cord when the TV is swivelled.  
Strain on the power cord can loosen  
connections and cause arcing or fire.  
In particular, pay close attention to this  
section and follow the safety and screen care  
instructions.The product warranty does not  
apply if damage is caused by failing to follow  
these instructions.  
1.1 Safety  
Two people are required to lift and carry  
a TV that weighs more than 25 kilos  
(55lb). Improper handling of the TV can  
result in serious injury.  
To avoid short circuit, do not expose the  
TV, remote control or remote control  
batteries to rain or water.  
Do not place the TV on the cord or  
anything else that can pinch the cord or  
loosen the mains plug.An improperly  
connected mains plug or damaged mains  
cord can cause arcing, fire or electric  
shock.  
To avoid risk of fire or electric shock,  
do not place the TV, remote control or  
remote control batteries near naked  
flame sources (for example, lighted  
candles) and other heat sources including  
direct sunlight.  
Be sure that you have full access to the  
mains cord for easy disconnection of the  
TV from the mains.  
Do not touch any part of the TV, power  
connector or antenna cable during  
lightning storms.  
When disconnecting the TV from the  
mains, be sure to:  
Do not install the TV in a confined space  
such as a bookcase. Leave a space of at  
least 10cm (four inches) around the TV  
for ventilation. Be sure air flow is not  
obstructed.  
Turn off the TV, then the mains power  
(if available).  
• Unplug the mains cord from the mains  
socket outlet.  
If mounting the TV on a flat surface, be  
sure to use only the supplied stand and  
to mount the TV on a level, solid surface.  
Do not move the TV if the stand is not  
properly screwed to the TV.  
• Unplug the mains cord from the  
power connector at the back of the  
TV.Always pull the mains cord by the  
plug. Do not pull the mains cord.  
EN-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Permanent hearing loss may occur if you  
use earphones or headphones at high  
volumes.Though high volume may sound  
normal over time, it can damage your  
hearing.To protect your hearing, limit the  
amount of time you use earphones or  
headphones at high volume.  
1.3 Environmental care  
This product is designed and  
manufactured for material recycling.  
Recycle the product packaging at your  
local recycling center and dispose of used  
batteries according to local regulations.  
Although your TV consumes very little  
power when in standby, energy continues  
to be consumed as long as the mains  
remain connected and powered.When  
not in use for extended periods of time,  
switch off and disconnect the TV from  
the mains.  
Do not dispose the product with  
household waste.Ask your dealer for  
information on how to safely dispose of  
the product. Uncontrolled waste disposal  
harms both the environment and human  
health (EEC 2002/96/EC).  
1.2 Screen care  
This TV consumes minimal energy in  
standby mode to minimize environmental  
impact.Active power consumption is  
displayed at the back of the TV.  
Turn off and unplug the mains cord  
before cleaning the screen.  
Clean the screen with a soft, dry  
cloth. Do not use substances such as  
household cleaning agents as these may  
damage the screen.  
C Caution:This is Class 1 apparatus. It  
must be connected to a mains socket  
out with a protective earthing connec-  
tion.  
To avoid deformations or color fading,  
wipe off water droplets as soon as  
possible.  
Do not touch, push, rub or strike the  
screen with hard objects as this may  
damage the screen permanently.  
Where possible, avoid stationary images  
that remain on-screen for extended  
periods of time. Examples include screen  
menus, teletext pages, black bars or stock  
market tickers. If you must use stationary  
images, reduce the screen contrast and  
brightness to avoid screen damage.  
EN-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Overview of  
television controls and  
connectors  
Use the side connectors for mobile devices  
such as a digital camera or game console.You  
can also connect a pair of headphones.  
2.3 Rear connectors  
2.1 Side controls  
HDMI  
1
HDMI  
2
SPDIF OUT  
A
U
D
I
O
I
N
VGA  
P
B
S
S
X
S
E
R
V
.
C
R
L
Y
Y
Pb  
Pr  
L
Pb  
Pr  
L
VIDEO  
75X  
TV ANA  
L
R
R
R
CVI-1  
CVI-2  
AV1 IN  
Use the rear connectors for antenna and  
permanent devices such as a high-definition  
disc player, DVD player orVCR.  
1. VOLUME + / -  
To increase or decrease volume.  
D Note: For more information aboutTV  
connections, refer to the Quick Start  
Guide.  
2. MENU  
To display the on-screen menus or to  
exit from the on-screen menus.  
The CH + /- buttons can be used to  
navigate the menu items.  
The VOLUME + / - buttons can be  
used to select the menu items.  
3. CHANNEL + / -  
To select the TV channel.  
4. POWER .  
To turn off or turn on the TV.  
2.2 Side connectors  
EN-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If necessary, refer to the Quick Start Guide for  
stand mounting instructions.  
2.5 Install the remote control  
batteries  
2.4 Position theTV  
Consider the following before positioning  
your TV:  
The ideal viewing distance for watching  
TV is three times its screen size.  
Position the TV where light does not fall  
directly on the screen.  
1. Slide the battery cover off the back of  
the remote control.  
Connect your devices before you  
position your TV.  
2. Insert the two supplied batteries. Be sure  
the + and - ends of the batteries line up  
with the markings inside the case.  
3. Slide the cover back into position.  
D Note: Remove the batteries if not using  
the remote control for an extended  
period of time.  
2.6 Use the Source List  
The source list lets you select the audio and  
video source that your device is connected  
to.  
Your TV is equipped with a Kensington  
Security Slot at the back of the TV.  
1. Press SOURCE to display the audio and  
video source list.  
If connecting an anti-theft Kensington  
lock (not supplied), position the TV  
within reach of a permanent object (such  
as a table) that can be easily attached to  
the lock.  
2. Press ï or Î to highlight your AV  
source and press OK to select.  
Source List  
TV  
AV  
SIDE AV  
CVI 1  
CVI 2  
VGA  
For the best Ambilight effect, position the  
TV 10cm (four inches) to 20cm (eight  
inches) away from the wall.Ambilight also  
works best in a room with dim lighting.  
HDMI 1  
HDMI 2  
Source List:  
TV: Normal TV broadcast via the  
75-ohm antenna connector.  
AV: Composite video and audio output.  
EN-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SIDE AV: Headphone jack, Composite  
video and audio, and S-Video input.  
CVI 1: Component video (Y Pb Pr) with  
Component audio input.  
CVI 2: Component video (Y Pb Pr) with  
Component audio input.  
VGA:Video Graphics Array with audio  
input.  
3. Using a cross-head screwdriver (not  
supplied), unscrew the four screws that  
secure the stand to the TV.  
HDMI 1: High Definition Multimedia  
Interface input.  
HDMI 2: High Definition Multimedia  
Interface input.  
Side HDMI: High Definition Multimedia  
Interface input.  
Refer to Quick Start Guide for connection  
instructions.  
2.7 Wall-mount theTV  
4. Firmly pull the stand from the bottom  
of the TV. Place both the stand and  
screws in a secure location for future  
reinstallation.  
B WARNING:  
Wall mounting theTV should only be  
performed by qualied installers. Konin-  
klijke Philips Electronics N.V. bears no  
responsibility for improper mounting  
that results in accident or injury.  
UseVESA-compatible bracket  
1. Purchase aVESA-compatible wall bracket  
Depending on the size of your TV screen,  
purchase one of the following wall  
brackets:  
2. Remove the TV stand.  
Secure theVESA-compatible wall  
bracket to theTV  
D Note:  
These instructions are only applicable  
toTV models with mounted stands. If  
yourTV stand is not mounted, see Secure  
the VESA-compatible wall bracket to the  
TV on this page. Carefully place theTV  
face down on a flat, stable surface that is  
covered by soft cloth.The cloth should be  
thick enough to protect your screen.  
Connect the antenna cable, mains cord and  
all other devices to the back of the TV as  
described in the Quick Start Guide.  
1. Locate the four mounting nuts at the  
back of the TV.  
EN-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
x4  
2. Align the plate/bracket to the four  
mounting nuts, placing the spacers (not  
supplied) between the plate/bracket and  
the mounting nuts.  
B WARNING:  
Use the correct bolts and spacers (see  
table) to secure theVESA-compatible  
wall bracket to yourTV.  
Using a spanner, insert the bolts through  
the plate/bracket and spacers, tightly  
D Note: Depending on yourVESA-  
compatible wall bracket, you may need  
to separate the mounting plate from the  
wall bracket for easier installation. Refer  
to yourVESA-compatible wall bracket  
documentation for instructions.  
securing the bolts to the mounting nuts.  
3. Continue with the instructions provided  
with yourVESA-compatible wall bracket.  
TV screen  
VESA-compatible wall  
Bolt and spacer type  
Special instructions  
size (in /cm) bracket (mm)  
32” / 82cm  
Adjustable 300 x 300.  
4 of M6 x 10mm steel  
bolt or  
Adjust bracket to  
200 x 300  
4 of M6 x 50mm steel bolt  
with 40mm spacer.  
before securing to  
the TV.  
42” / 107cm  
or larger  
Fixed 400 x 400.  
4 of M8 x 15mm steel bolt  
or 4 of M8 x 55mm steel  
bolt with 40mm spacer.  
None.  
EN-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Overview of  
remote control keys and  
functions  
1
2
1. POWER .  
To switch the TV to standby mode if it  
is already turned on. Or to turn on TV  
when it is in standby mode.  
3
4
5
6
2. SOURCE  
To display the input source list or to  
cycle through list of input sources by  
repeatedly pressing button.  
7
8
9
3. SMART MODE  
To select or cycle through predefined  
picture and sound settings  
4. AMBILIGHT ON/OFF  
10  
11  
To turn on or turn off Ambilight.  
5. SURF  
To channel surf up to 8 channels.  
6. Color buttons (Digital mode only)  
To use preset functions on the on-screen  
display.  
12  
13  
7. ANA / DIGI  
To toggle between analog and digital  
modes.  
8. CURSOR  
To navigate and select menu items and  
adjust individual settings  
14  
9. BACK  
To return to the previous menu.  
10. ANALOG MENU  
To switch the menu on or off in analog  
mode.  
13. Numeric (0-9)  
To enter channel number, set time or  
timer.  
11. VOL (Volume + / -)  
To turn up or turn down the sound level.  
12. MUTE  
14. STATUS / EXIT  
To turn the speaker sound on or off.  
To display information on the current  
channel or to exit on-screen menus.  
EN-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. SAP  
To select SAP, Stereo or Forced  
Mono.  
16. A/CH (Alternate Channel)  
To display the last viewed channel and  
the current channel.  
17. INCR. SURR  
To enable Incredible Surround in stereo  
mode and Spatial in mono mode.  
15  
16  
17  
18  
18. CHANNEL LIST  
To display the list of available channels.  
19. GUIDE (Digital mode only)  
Electronic Program Guide button  
To get program listings and information.  
19  
20  
20. OK  
To select menu items or confirm a  
selection.  
21. DIGITAL MENU  
To switch the menu on or off in digital  
mode.  
21  
22  
22. CH (Channel + / -)  
To switch to the next or previous  
channel.  
23. Dot (Digital mode only)  
To enter values for minor channels  
(example: 36.5).  
E Tip: Press OK or press Æ to select menu  
items or conrm your selection.  
23  
EN-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2 Switch on theTV for the  
rst time  
4. Use yourTV in  
digital mode  
When you turn on TV for the first time,  
the TV is in digital mode.You must set the  
language and add new services.  
4.1 Get Started  
When the TV is powered-on for the  
first time you are prompted to run auto  
install to receive the channels that are  
broadcasted locally.  
Setup your language and services  
1. Press Æ to enter Language and Î or ï  
to select your preferred language.  
Auto installation takes 20 to 40 minutes  
depending on the number of channels  
that are transmitted by the cable  
provider or broadcaster.  
2. Press OK to confirm.  
Setup  
Test reception  
Language  
Language  
English  
Add new services  
Portuguese  
Spanish  
When the TV is not receiving any  
signal from the antenna or cable, NO  
SIGNAL appears on the TV screen.This  
can be caused by the antenna or cable  
not being plugged in correctly or when  
the wrong tuner mode is selected.  
C
Contrast +  
NR  
Close  
Select system menu language.  
When no transmission is received from  
the broadcaster, NO PROGRAM  
appears on the TV screen.  
3. Press ï to select Add new services.  
4. Press OK to start the installation.  
The TV searches for the available analog  
and digital channels.  
You cannot receive pay channels when  
using direct antenna / cable connection  
to the television.  
When the set-top box is connected to  
the television using coaxial cable, auto-  
program the television for the set-top  
box source channel and change the  
channels at the set-top box to view the  
program.  
Channel  
TV  
32  
579 MHz  
When scanning has completed, a pop-  
up window displays information on the  
number of analog and digital services  
found.  
When the set-top box is connected to  
the television using AV connection, select  
the television input source for the set-  
top box to view the program. Change  
the channels at the set-top box to view  
the program.  
EN-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Channel name  
5. Program title  
Total 1 Channels Found  
Current Scanning  
Scan percentage  
69/69  
6. Program start time  
Information  
7. Program time progress bar :Displays  
Analog TV services:  
Analog Radio services:  
Digital TV services:  
1
1
1
0
time left indicator bar.  
Digital Radion services:  
8. Program end time  
Yes  
Cose  
A service scan is in progress, please press OK to stop.  
Clock :Current time.  
9.  
5. If no digital channels are detected, press  
ANA/DIGI to switch to analog mode.  
4.4 Install channels  
4.3 Understand the  
information banner  
Check for newTV channels  
Check the availability of TV channels that  
have been launched by the broadcaster after  
you have installed the TV.  
When you select a digital program, an  
information banner is displayed at the top of  
the screen.The banner disappears after a few  
seconds.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
You can also press STATUS/EXIT to  
display the information banner. When you  
press STATUS/EXIT twice in succession,  
the TV displays the program description  
2. Press DIGITAL MENU to display the  
on-screen menu.  
Setup  
Favorites  
Service List  
Service Setup  
Restore Default  
The information banner provides useful  
information about the current program such  
as channel name, program title, start time of  
program, and so on.  
Preferences  
Access Restrictions  
Installation  
System  
1080p  
000.0000  
TV GloboHD The Fairly Odd Parents  
16:35  
16:50  
16:48  
1
2
3
4
5
6
7
8
9
3. Select Installation > Service List and  
press Æ.  
Setup  
|
Installation  
Service List  
Rearrange Services  
View new TV Channels  
Rearrange Services  
Installation  
Uninstall services  
Move services  
1. Resolution: lndicates resolution type,  
4
for example: 1080p.  
5
Installation  
6
2. Favorite list indication: Indicated by  
a tick if you have added this program to  
your favorite list setting.  
7_  
8 _  
Close  
4. Press Î or ï to select View newTV  
3. Channel number :In the format:  
000:0000  
EN-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channels.  
Setup | Installation  
Service Setup  
Add newServices  
Installation  
5. If new services are available, press Æ  
button to enter into the list of services,  
and press Î or ï to move through the  
list.  
Add new services  
Add newServices  
Reinstall services  
Manual install services  
4
5
Installation  
6
Setup | Installation | Service List  
7_  
View TV Channels  
05.1 - TV GloboHD  
05.3 - TV GLOBO M  
Installation  
8 _  
Close  
4. Press Æ to Add new services and  
press OK to activate the installation.  
A search begins.Any new channels are  
added to the channel list menu.The  
percentage of the installation completed  
and the number of channels found are  
displayed.  
Access restriction  
Signal Strength:  
Signal Quality:  
Close  
Select the service(s) to change channel.  
For information about how to add new  
services to your list of favorite channels,  
see Add new channels to your list on this  
page.  
5. When the search is complete, press OK  
to accept the new services.  
6. Press the Í to return to the previous  
menu or press DIGITAL MENU to  
exit.  
6. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
E Tip: Press ANA/DIGI to switch be-  
E Tip: Press ANA/DIGI to switch be-  
tween the digital and analog modes.  
tween the digital and analog modes.  
Reinstall all channels  
Add new channels to your list  
This option lets you reinstall all the digital TV  
channels.  
Search for new TV channels that have been  
launched by the broadcaster after the initial  
installation.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
1. Press SOURCE and press Î or ï to  
2. Press DIGITAL MENU to display the  
select DigitalTV from the source list.  
on-screen menu.  
2. Press DIGITAL MENU to display the  
3. Select Installation > Service Setup >  
on-screen menu.  
Reinstall services and press Æ  
3. Select Installation > Service Setup  
Setup | Installation | Reinstall services  
and press Æ.  
Auto Scan  
Total 1 channels found  
Installation  
Scan status  
8/68  
05.1 - TV GloboHD  
Scan percentage  
05.3 - TV GLOBO M  
Test Reception  
Access restriction  
Installation  
7_  
8 _  
Close  
A service scan is in progress, please press OK to stop.  
EN-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C Caution: Reinstalling services  
overwrites all your previously stored  
channels.  
7. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
4. Press OK to start the installation.  
A search is for digital services is started.  
The services are stored automatically.  
When the search is complete, the menu  
indicates the number of digital services  
found.  
E Tip: Press ANA/DIGI to switch be-  
tween the digital and analog modes.  
Change the order of stored channels  
Change the order of the digital channels that  
you have stored.  
When searching is complete, a list of  
stored channels is displayed.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
5. Press OK to store the services.  
2. Press DIGITAL MENU to display the  
6. Press Í to return to the previous menu  
on-screen menu.  
or press DIGITAL MENU to exit.  
3. Select Installation > Service List >  
E Tip: Press ANA/DIGI to switch be-  
Rearrange Services and press Æ.  
tween the digital and analog modes.  
Rearrange  
Uninstall Services  
GloboHD  
Uninstall services  
Move services  
Install digital channels manually  
GLOBO M  
Manually scan services by entering the  
frequency of your target channel.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
Close  
2. Press DIGITAL MENU to display the  
4. Press Æ to select Uninstall services  
and press Î or ï to select the program  
to uninstall.  
on-screen menu.  
3. Select Installation > Service Setup >  
Manual install services and press Æ.  
5. Press Æ to return to the previous menu  
Setup | Installation | Service Setup  
and ï to select Move services.  
Manual install services  
0
5
.
1 -
T
V GloboHD  
Installation  
Setup | Installation  
Channel No.  
2
.
-
Installation  
Move Services  
Rearrange  
Frequency  
Test Reception  
57143  
Uninstall services  
GloboHD  
Access restrictions  
Start Scan  
List 2  
GLOBO M  
Move services  
I
t ll ti  
Listen to new Radio Stations  
Access restriction  
Signal Strength:  
Signal Quality:  
7_  
8 _  
Close  
Close  
4. Press Í and Æ to select the channel  
number, and ï to select Start Scan.  
6. Press Î or ï to highlight the program,  
and press OK to select.  
5. Press OK to start the search.  
7. Press Î or ï move the program to  
the order you want, and press OK to  
confirm.  
6. When the search is complete, press OK  
to accept the new service.  
EN-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Repeat the above steps to move other  
channels.  
tween the digital and analog modes.  
Set your time zone  
9. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
E Tip: Press ANA/DIGI to switch be-  
2. Press DIGITAL MENU to display the  
tween the digital and analog modes.  
on-screen menu.  
3. Select Preferences > Time Zone and  
4.5 Set your preferences  
press Æ.  
4. Press Î or ï to select the time zone  
Set your language  
and press OK.  
Select your preferred language, time zone,  
and digital audio output.  
5. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
Setup | Preferences  
2. Press DIGITAL MENU to display the  
Preferences  
Language  
Time zone  
on-screen menu.  
Broadcasted Time (-3h)  
Broadcasted Time (-2h)  
Broadcasted Time (-1h)  
Time Zone  
3. Select Preferences > Language and  
Digital Audio Output  
Transparency  
(
Broadcasted Time  
press Æ.  
C lor Tem  
Broadcasted Time (+1h)  
C ntrast +  
Broadcasted Time (+2h)  
Setup | Preferences  
NR  
Broadcasted Time (+3h)  
Language  
Audio  
System  
Audio  
English  
Portuguese  
Spanish  
C
Close  
Select time zone in your location  
Color Tem  
Contrast +  
NR  
E Tip: Press ANA/DIGI to switch be-  
tween the digital and analog modes.  
Close  
Set your digital audio output  
Select audio preference language.  
1. Press SOURCE and Î or ï to select  
4. Press Î or ï to select Audio or  
DigitalTV from the source list.  
System and press OK.  
2. Press DIGITAL MENU to display the  
5. Press Î or ï to select the language and  
on-screen menu.  
press OK to confirm.  
3. Select Preferences > Digital Audio  
6. Press Í to return to the previous menu  
Output and press Æ.  
or press DIGITAL MENU to exit.  
4. Press Î or ï to select AAC or PCM  
output.  
Menu options for language  
Audio:To select the audio sound  
language.  
System:To select the menu language.  
E Tip: Press ANA/DIGI to switch be-  
EN-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup | Preferences  
Preferences  
Setup | Preferences  
Preferences  
Digital Audio Output  
AAC  
Transparency  
0%  
Language  
Language  
PCM  
20%  
Time Zone  
Time Zone  
Digital Audio Output  
Transparency  
Digital Audio Output  
Transparency  
(GMT-04:00) Manaus  
(GMT-05:00) Acre  
Color Tem  
40%  
60%  
80%  
Contrast +  
Contrast +  
NR  
NR  
Close  
Close  
Select AAC for 5.1 system.  
4. Press the Î or ï button to select the  
5. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
level of transparency.  
5. Press Í to return to the previous menu  
Digital Audio Output  
or press DIGITAL MENU to exit.  
AAC:Advanced Audio Coding (AAC) is  
a very high quality audio encoding and  
noise reduction system. It is the audio  
system you hear in High Definition  
Television (HDTV) and digital broadcast  
TV (DTV).  
4.6 Restoring to default  
settings  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
PCM: Pulse Code Modulation (PCM) is a  
way of transmitting uncompressed digital  
audio. PCM is used by Audio CDs.  
2. Press DIGITAL MENU to display the  
on-screen menu.  
3. Select Installation > Restore Default  
and press Æ.  
E Tip: Press ANA/DIGI to switch be-  
tween the digital and analog modes.  
Setup | Installation  
Installation  
Service List  
Restore Default  
Restore Default  
Set your menu transparency  
Service Setup  
Restore Default  
Change your menu display from the default  
opaque to different levels of transparency.  
Color Tem  
Contrast +  
NR  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
Close  
2. Press DIGITAL MENU to display the  
4. Highlight Yes to confirm restoring the  
on-screen menu.  
settings to default.  
3. Select Preferences > Transparency  
Settings restored to default  
and press Æ.  
Stored channels: Cleared.  
Program list: Cleared.  
Favorite list: List names set back to  
default names.  
LockedTV channels: Cleared.  
Maturity rating: Blocking cleared.  
EN-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio language: Set to Brazilian  
Portuguese.  
Change your PIN code  
1. Enter the Access Restrictions menu as  
described in Turn on Set PIN Protection on  
this page.  
Menu language: Set to Brazilian  
Portuguese.  
2. Press the ï to select Change Pin  
Digital audio output: Set to PCM.  
Time zone: Set to Broadcasted time.  
Pin Code: Reset to “1234”.  
Code and press OK.  
3. Enter your PIN code using the numeric  
buttons (0-9) on the remote control.  
4. Enter your new PIN code.  
4.7 Control access to digital  
channels  
Setup | Access restrictions  
Change PIN Code  
Set Pin Protection  
Enter your system PIN  
_
_ _  
_
Restrict access to the digital channels by  
blocking them with an access PIN code.  
New system PIN  
Re-enter system PIN  
Radio Stations  
Color Tem  
Contrast +  
NR  
Change pin code  
Turn on Set PIN Protection  
1. Press SOURCE and Î or ï to select  
Close  
DigitalTV from the source list.  
New system PIN.  
5. Enter the new code again to confirm.  
2. Press DIGITAL MENU to display the  
on-screen menu.  
Setup | Access restrictions  
Change PIN Code  
Set Pin Protection  
3. Select Access Restrictions and press  
Enter your system PIN  
_
_ _  
_
Æ.  
New system PIN  
Re-enter system PIN  
Radio Stations  
You are prompted for the PIN code.  
Color Tem  
Contrast +  
NR  
Change pin code  
Please enter your pin code  
The menu is protected.  
Please enter your system pin code.  
Cancel  
_
_ _  
_
Close  
Re-enter system PIN.  
6. Press Í to return to the previous menu  
4. Enter the default PIN code “1234” with  
or press DIGITAL MENU to exit.  
the numeric buttons (0-9).  
You can access the menu now using the  
default PIN code.  
E Tip: If you have forgotten your PIN code,  
reset the code by pressing “0711” fol-  
lowed by “0711” to enter a new code.  
5. Press the Î or ï button to highlight  
On, and press OK to turn on PIN code  
protection.  
Reset your PIN code  
D NOTE:  
If you have forgotten your system PIN code,  
you can reset it to the default PIN code.  
You cannot navigate the Access  
Restrictions menu items when Set Pin  
Protection is set to Off.  
Set Pin Protection must be set to  
On for program, content or channel  
restrictions to be activated.  
7. Enter 0711” with the numeric buttons  
(0-9) when prompted for the PIN code.  
EN-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The TV displays Incorrect Pin and  
prompts you to enter the PIN code  
again.  
D Note: You are prompted to enter the  
PIN code if theTV program is blocked  
by the Maturity Rating lter. Enter  
the PIN code to temporarily access the  
program.  
Please enter your pin code  
Incorrect Pin  
Cancel  
*
* *  
*
Restrict access toTV programs with  
Block Content  
8. Enter 0711”.  
1. Enter the Access restrictions menu as  
described in Turn on Set PIN Protection on  
the previous page.  
9. The PIN code is reset to the default  
factory setting of “1234”.  
Please enter your pin code  
2. Press ï to select Block Content and  
The default pin code is set.  
Please change it to your own system pin code  
Please enter your system pin code to change setting.  
press OK.  
Cancel  
_
_ _  
_
3. Press the Î or ï buttons to select the  
type of content to be blocked from  
access. and press OK  
10. Enter “1234” with the numeric buttons  
(0-9).  
Setup | Access restrictions  
You can continue using this default  
PIN code or change the PIN code by  
selecting Change Pin Code in the  
Access Restrictions menu.  
Access restrictions  
Maturity Rating  
Block Content  
No Block  
Block Drugs  
Block Violence  
Block Content  
TV Channels  
Block Sex  
Set Pin Protection  
Change Pin Code  
CBlock Violence, drugs  
CBloonctkraSsetx+, drugs  
NBlRock Violence, sex  
Restrict access to programs with  
Maturity rating  
Block All  
Close  
.
Restrict access to the digital programs (that  
are rated by the broadcaster) using the  
Maturity rating.  
D Note: A pop-up window prompts you  
to enter the PIN code if theTV program  
is blocked by the Block Content lter.  
Enter the PIN code to temporarily access  
the program.  
1. Enter the Access restrictions menu as  
described in Turn on Set PIN Protection on  
the previous page.  
2. Press ï to select Maturity Rating and  
Restrict access toTV channels  
press OK to see the list of ratings.  
1. Enter the Access restrictions menu as  
described in Turn on Set PIN Protection on  
the previous page.  
Setup | Access restrictions  
Access restrictions  
Maturity Rating  
Maturity Rating  
No maturity blocking  
Block any rated content  
Block above 10 years  
Block Content  
TV Channels  
2. Press Î to select TV Channels and  
Block above 12 years  
CBlock above 14 years  
CBloonctkraasbto+ve 16 years  
NR  
Set Pin Protection  
Change Pin Code  
press the Æ button.  
3. Press Î or ï buttons to highlight the TV  
channel to restrict.  
Close  
4. Press OK to restrict the TV channel.  
3. Press Î or ï to select the rating and  
An ‘X’ marks the check box to indicate  
the channel is locked.  
press OK to confirm.  
EN-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup | Access restrictions  
Access restrictions  
Maturity Rating  
Setup | Favorites  
List 1  
Block Content  
TV GloboHD  
Globo M  
Favorite List 1  
Favorite List 1  
List 2  
Name  
Block Content  
TV Channels  
Select TV channels  
Add all services  
Remove all services  
List 3  
List 4  
Set Pin Protection  
Change Pin Code  
C
Color Tem  
Contrast +  
NR  
Contrast +  
NR  
Close  
Close  
Select the TV channels you want to lock  
Enter the name for the list.  
3. Select Yes and press OK to confirm  
D Note:  
changing the list name.  
To unlock theTV channel, highlight the  
TV channel and press OK to uncheck  
Setup | Favorites  
List 1  
Name  
Select TV channels  
Favorite List 1  
Favorite List 1  
List 2  
the box.  
List 3  
Ad
Rename list  
Re
4.8 Setup your favorite  
channels  
Do you really want to change name for list?  
Yes  
No  
Create a list of up to four of your favorite  
TV channels.  
Close  
Enter the name for the list  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
Select theTV channels  
2. Press DIGITAL MENU to display the  
1. Press Í or Æ to navigate the list of  
on-screen menu.  
channels to select.  
3. Select Favorites > list number (List 1  
2. Press OK to select.An ‘X’ marks the  
check box to indicate the channel or  
station is selected.  
to List 4) and press OK.  
4. Press the Æ button to enter the  
Setup | Favorites  
Favorites setting options.  
List 1  
Name  
Favorite List 1  
GloboHD  
List 2  
GLOBO M  
Select TV channels  
Add all services  
Change the Favorite List name  
List 3  
List 4  
Remove all services  
1. Press Í or Æ to move the cursor over  
the character of the name list, and press  
Î or ï buttons to scroll through the  
character list.  
Color Tem  
Contrast +  
NR  
Close  
Select TV channels for the list.  
2. Press OK to confirm.  
Add all services to the favorite list  
1. Press OK to add all the services to the  
favorite list.  
EN-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press DIGITAL MENU to display the  
Setup | Favorites  
List 1  
on-screen menu.  
Favorite List 1  
Add all services  
Name  
3. Select System > Current Software  
Select TV channels  
Add all services  
Remove all services  
Version, and press OK.  
List 3  
List 4  
The software version is displayed.  
Color Tem  
Contrast +  
NR  
System Information  
Close  
H/W Version: ZDT620 ISDTV V0.1  
S/W Version: LC07B-DTM V0.13+  
Release Time: Aug-27-2007 02:10PM  
Press [OK] to add all services to the favorites list  
2. Select Yes and press OK to confirm  
adding all the services.  
Setup | Favorites  
List 1  
Name  
Favorite List 1  
Add all services  
Select TV channels  
Add all services  
List 3  
D Note: Screen information may differ  
Add all services  
Do you really want to add all services?  
depending on your software version.  
Yes  
No  
Installing new software  
Close  
Press [OK] to add all services to the favorites list.  
1. Switch off the TV set from the wall  
socket mains. Insert your USB device to  
the USB port at the rear panel of the TV  
set and switch on the set.  
3. Press Í to return to the previous menu  
or press DIGITAL MENU to exit.  
2. Press SOURCE and Î or ï to select  
Remove all services to the favorite list  
DigitalTV from the source list.  
1. Press the OK button to remove all the  
3. Press DIGITAL MENU to display the  
services from the favorite list.  
on-screen menu.  
2. Select Yes and press OK to confirm  
4. Select System > New Software, and  
removing all the services.  
press OK  
3. Press Í to return to the previous menu  
5. Press OK to select the USB disk and  
or press DIGITAL MENU to exit.  
press OK again to select the filename.  
E Tip: Press ANA/DIGI to switch be-  
Select USB disk  
USB disk1  
tween the digital and analog modes.  
upgrade.zim  
4.9 Update yourTV  
View the current version information of the  
TV software or install new versions when  
they are available.  
Close  
Select file to upgrade.  
6. Select Yes and press OK to confirm.  
Viewing the current software version  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
EN-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
upgrade.zim  
Select USB disk  
USB disk1  
16:24  
16:35 The fairly odd... 16:50 The fairly odd...  
00.1 BBC One  
00.1 BBC Two 16:30 Ready Steady  
17:15 The weakest lin  
Confirmation  
00.1 BBC Three 12:50 This is BBC Thr 18:58 Welcome to BB  
00.1 BBC Four 12:50 This is BBC Fou 18:58 This is BBC Fou  
Do you really want to update?  
Record  
Next day More info  
Prev day  
16:35 The fairly odd parents  
15 miins  
Genre name - Sub genre name  
Yes  
No  
Welcome to the show that literally turns hidden treasures into cash  
anddreamsintorealities,BBCAmericaslatestU.S.premiere  
addition to the channels hugely successful living line-up.  
Close  
Select file to upgrade.  
A pop-up window displays an indicator  
bar while the update is in progress.  
4. Press Í to return to the previous screen  
and press Æ to access the Next list.  
5. Press Î or ï select the date and press  
Select USB disk  
USB disk1  
the OK.  
upgrade.zim  
Updating  
16:24  
Programming flash  
16:35 The fairly odd... 1Mon31-10d...  
00.1 BBC One  
00.1 BBC Two 16:30 Ready Steady  
1Tue01-11t lin  
00.1 BBC Three 12:50 This is BBC Thr 1BB  
Wed 02-11  
00.1 BBC Four 12:50 This is BBC Fou 1Thur03-11Fou  
00.1 France  
16:10 Newsround sho 1r  
Fri 04-11  
Close  
Select file to upgrade.  
00.1 CBeebles  
16:20 Step inside  
19:00 BBC News  
18:45 Rock from the  
1ers  
Sat 05-11  
1Sun 06-11he  
00.1 BBC 7  
00.1 BBC 8  
Record  
When the update completes, the screen  
goes blank momentarily.  
Today  
1
Prev day  
Next day  
Jumpto
15 miins  
16:35 The fairly odd parents  
Press OK to view this channel  
7. Switch off the TV set from the wall  
socket mains for one to two seconds.  
6. Press the colour buttons to activate  
the TV guide.The TV guide features are  
displayed at the bottom of the screen.  
8. Switch on the TV set again.The new  
software is installed.  
7. When you have finished, press GUIDE  
to exit.  
4.10 Get program listings  
D Note: Sample screens only.The  
Electronic Program Guide may differ  
from yourTV set.  
Access the Electronic Program Guide which  
provides detailed information about the  
digital programs.  
1. Press SOURCE and Î or ï to select  
DigitalTV from the source list.  
2. Press GUIDE on the remote control.  
A list of digital programs in the selected  
favourites list is displayed.  
3. Press Æ to access the Now list, and  
press Î or ï to select a program.  
EN-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Use yourTV in  
analog mode  
5.1 Select your location  
Set the location to suit a shop floor or home  
environment.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Select Location and press OK.  
4. Press ï or Î to select the location and  
press OK to confirm.  
Main  
Home  
Shop  
Picture Setting  
Advance Picture  
Sound  
Ambilight  
Features  
Install  
Location  
D Note: To select your menu language,  
refer to Set your language on page 17.  
EN-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on-screen menu.  
6. Install channels  
3. Select Install > Tuner Mode and press  
OK.  
6.1 Automatically install  
channels  
4. Press ï or Î to select Auto, Antenna  
or Cable, and press OK to select.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
Install  
Tuner Mode  
Auto Program  
Manual  
Auto  
Antenna  
Cable  
2. Press ANALOG MENU to display the  
on-screen menu.  
Name  
Fav. Program  
3. Select Install > Auto Program and  
press OK.  
Auto Program  
5. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Program  
TV  
3
196 MHz  
Tuner Modes  
Auto:Automatically detects if the cable  
signal input is present.  
Auto Program starts scanning for  
channels automatically.When scanning  
is complete, the first installed channel is  
displayed.  
Antenna: Detects antenna signals and  
searches for all antenna TV channels  
available in your local area.  
Cable: Detects cable signals and  
searches for all cable TV channels  
available in your local area.  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
E Tip:To cancel or interrupt auto search-  
ing, press ANALOG MENU. Only chan-  
nels found before interruption are stored.  
Change theTV System  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
2. Press ANALOG MENU to display the  
6.2 Manually install channels  
on-screen menu.  
Manually set the TV tuner and system and  
fine tune the channels.  
3. Select Install > Manual > System, and  
press OK.  
4. Press ï or Î to select Auto, NTSC,  
PAL-M or PAL-N, and press OK to  
select.  
Change theTuner Mode  
Manually set the tuner system if you have  
problems using Auto Program to search  
for channels.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
2. Press ANALOG MENU to display the  
EN-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
channel reception.  
Manual  
System  
Fine Tune  
6. Press Í to return to the previous menu  
Auto  
or press ANALOG MENU to exit.  
NTSC  
PAL-M  
PAL-N  
6.3 Manage channels  
Name your channels  
5. Press Í to return to the previous menu  
Assign a short name for your channels with  
the Name.This is available in TV mode only.  
or press ANALOG MENU to exit.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
TV Systems  
Auto: Detects the tuner system  
2. Press ANALOG MENU to display the  
automatically.  
on-screen menu.  
NTSC: For North American and some  
3. Select Install > Manual > Name, and  
South American countries.  
press OK.  
PAL-M: For Brazil.  
Install  
PAL-N: For Argentina, Uruguay and  
Paraguay.  
001  
002  
003  
004  
Tuner Mode  
Auto Program  
Manual  
Name  
005 SPORT  
006  
Fav. Program  
Fine tune your channels  
007  
008  
Fine tune the channels after searching them  
automatically by using FineTune.  
4. Press OK to select the first channel  
1. Switch to the channel number to fine  
tune.  
number on the list.  
5. Press OK to start naming the channel.  
2. Press SOURCE and Î or ï to select  
TV from the source list.  
6. Press Æ until a rectangular block cursor  
appears next to the channel number.  
3. Press ANALOG MENU to display the  
on-screen menu.  
7. Press ï or Î to cycle through the list  
(A-Z, 0-9) to select the characters or  
numbers to use for the channel name.  
4. Select Install > Manual > FineTune  
and, press OK.  
8. Press OK to move the cursor to  
the second space and assign the next  
character or number.  
Manual  
System  
Fine Tune  
You can use up to 5 characters or  
numbers to name your channels.  
9. Press OK to store the name of the  
channel.  
The channel number and name are  
5. Press ï or Î to manually fine tune the  
EN-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
displayed on the top left of the screen.  
Install  
10. Press Í to return to the previous menu  
001  
002  
003  
004  
005  
006  
007  
008  
Tuner Mode  
Auto Program  
Manual  
Name  
Fav. Program  
or press ANALOG MENU to exit.  
Store your favorite channels  
Fav. Program lets you store only the  
channels you want on a favorite list.  
1. Press SOURCE and Î or ï to select  
7. Press Í to return to the previous menu  
TV from the source list.  
or press ANALOG MENU to exit.  
2. Press ANALOG MENU to display the  
on-screen menu.  
E Tip: Press the numeric (0-9) to access  
channels not on the favorite list.  
3. Select Install > Fav. Program and  
press OK.  
4. The list of channel numbers is displayed  
on the right panel.All channel numbers  
with a tick ($) are marked as favorite  
channels.  
Install  
Tuner Mode  
Auto Program  
Manual  
Name  
Fav. Program  
001  
002  
003  
004  
005  
006  
007  
008  
5. Press OK to select the first channel  
number on the list, or press ï to move  
down the list.  
6. Press OK to remove the tick or add the  
tick to the corresponding number.  
Only channel numbers with the tick are  
added to your favorite list.When you  
use the CH + / - buttons on the remote  
control, only your favorite channels are  
accessible.  
EN-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contrast:Adjusts the contrast.  
7. Use yourTV  
Sharpness:Adjusts the detail level of  
the picture.  
7.1 AdjustTV settings  
Tint: Adjusts the detail of the skin tones  
of the picture (TV or AV modes only).  
Adjust your picture settings  
ColorTemp: Sets the color to Cool  
(more blue), Normal (balanced) or  
Warm (more red).  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
Adjust your sound settings  
1. Press SOURCE and Î or ï to select  
3. Select Picture Setting and press OK.  
TV from the source list.  
4. Press ï or Î to highlight the menu  
2. Press ANALOG MENU to display the  
items and press OK to select.  
on-screen menu.  
Picture Setting  
Brightness  
Color  
3. Select Sound and press OK.  
Contrast  
Sharpness  
Tint  
Sound  
Equalizer  
Balance  
Auto Vol. Leveler  
120 HZ  
200 HZ  
500 HZ  
Color Temp  
1200 HZ  
3000 HZ  
7500 HZ  
12000 HZ  
Incr. Surround  
BBE  
SAP  
Forced Mono  
5. Press ï or Î to adjust the settings of  
the menu items.  
Some items have the level indicator bar  
while some have discreet settings such as  
Cool, Normal and Warm.  
4. Press ï or Î to highlight the menu  
items and press OK to select.  
5. Press ï or Î to adjust the settings of  
the menu items.  
Picture Setting  
Cool  
Normal  
Warm  
Brightness  
Color  
Contrast  
Sharpness  
Tint  
Equalizer  
120Hz  
200Hz  
500Hz  
Color Temp  
1200Hz  
3000Hz  
7500Hz  
12000Hz  
6. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Some items have the level indicator  
bar, some have discreet settings such as  
Mono, Spatial, or On and Off.  
Picture settings:  
Brightness:Adjusts the brightness.  
Color:Adjusts color saturation.  
EN-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D Note: Select Stereo or Incr. Surround  
modes when theTV broadcast is in  
stereo. Press INCR. SURR to toggle  
with the sound modes.  
Sound  
Equaliser  
Balance  
Auto Vol. Leveler  
Incr. Surround  
Off  
On  
BBE  
7.2 Change your picture  
format  
SAP  
Forced Mono  
Select various screen formats to suit the  
type of programs you watch.  
Sound  
Equaliser  
Balance  
1. Press Í or Æ repeatedly to cycle  
Mono  
Spatial  
through the available picture formats.  
Auto Vol. Leveler  
Incr. Surround  
BBE  
Picture Formats:  
SAP  
4:3:The entire picture is reproduced on  
the screen with black bands on the left  
and right of the screen.  
Forced Mono  
6. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Sound settings:  
Equalizer:Adjusts each individual  
frequency (tone).  
Movie Expand 14:9:The picture is  
enlarged to fit horizontally, with black bands  
visible at the sides of the screen.  
Balance:Adjusts the left and right  
speaker sound level.  
AutoVol. Leveler: Controls sudden  
sound level increase when changing  
channels or during advertisement slots.  
Incr. Surround: Enhances stereo effect.  
Select Incr. Surround or Stereo (when  
in stereo mode) or Mono or Spatial  
(when in mono mode).  
Movie Expand 16:9:The picture is  
enlarged to fill up the screen.The top  
and bottom of the picture is cropped.  
BBE: Restores clarity and presence for  
better speech intelligibility and musical  
realism.  
SAP: (Secondary Audio Programming):  
Activates alternative languages or  
commentary.  
Forced Mono: Select Off to leave  
broadcast signal as is. Select On to force  
the signal to mono.  
Subtitle Zoom:The 4:3 format  
program is displayed on the entire screen  
EN-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
leaving the subtitles area visible.The top  
of the picture is cropped.  
Power  
100%  
10%  
0%  
Personal  
Superzoom: Removes black bands on  
the sides of the screen of 4:3 format  
programs.  
Power  
100%  
Personal  
10%  
0%  
Widescreen:The picture is displayed in  
its original proportions.  
Smart Mode settings:  
Personal: Based on the settings you  
customized in the Picture Setting  
menu.  
Sports:Vivid picture settings and clear  
sound for high action.  
7.3 Use Smart Mode settings  
Standard: For normal TV viewing.  
Movie: Brilliant picture settings for a  
cinematic experience.  
Smart modes are preset settings to  
match the different viewing and listening  
environment.  
Game: Optimized for PCs and game  
consoles.  
1. Press SMART MODE repeatedly to  
cycle through the available settings.  
Power Saver: Eco-friendly settings to  
reduce power consumption.  
The settings are displayed at the bottom  
of the screen.  
D Note: The Power meter indicates the  
power consumption for each mode. For  
example, 10% means this mode uses 10%  
of theTV’s total power consumption.  
EN-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
channels while the Surf list is currently  
displayed.  
7.4 Use the Surf feature  
Store up to 8 of your favorite channels in the  
Surf list.  
Add channels to your Surf list  
1. Press the numeric (0-9) buttons or CH  
+ / - to switch to your favorite channel.  
2. Press SURF to display the Surf list.  
Only one channel number is displayed on  
the list.This is the same channel number  
currently selected.  
Surf  
002  
003  
015  
020  
050  
3. Press OK to add the channel to the Surf  
list.  
A tick ($) is displayed beside the channel  
number to indicate that it is stored in the  
Surf list.  
Surf  
002  
003  
015  
020  
050  
4. Repeat the above steps to add more  
channels to the Surf list.  
Remove channels from Surf list  
1. Press SURF to display the Surf list.  
2. Press ï or Î to highlight the channel  
number and press OK to remove the  
channel from the Surf list.  
3. Repeat the above steps to remove more  
EN-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On + Light Sensor, and press OK to  
select.  
8. Use more of yourTV  
Advance Picture  
Contrast +  
Active Control  
Artifacts Reduction*  
Dig. Natural Motion*  
8.1 Use the Advance Picture  
features  
Off  
On  
On + Light Sensor  
Use Contrast +  
Contrast + optimizes the contrast for  
overall picture quality.  
5. Press Í to return to the previous menu  
1. Press SOURCE and Î or ï to select  
or press ANALOG MENU to exit.  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
Active Control settings  
Off: Turns off Active Control.  
3. Select Advance Picture > Contrast +  
and press OK.  
On: Turns on Active Control.  
4. Press ï or Î to highlight Off or On,  
On + Light Sensor: Uses a sensor to  
adjust the picture brightness depending  
on the room light conditions.  
and press OK to select.  
Advance Picture  
Off  
On  
Contrast +  
Active Control  
Artifacts Reduction*  
Dig. Natural Motion*  
Use Artifacts Reduction and Dig.  
Natural Motion  
Artifacts Reduction smoothens the  
transitions on digital pictures.  
Dig. Natural Motion reduces the field  
and line flicker and reproduces smooth  
movement especially in movies.  
5. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
Use Active Control  
2. Press ANALOG MENU to display the  
on-screen menu.  
Active Control optimizes picture quality by  
measuring and analyzing the incoming signal  
to automatically adjust the picture quality  
settings.  
3. Select Advance Picture > Artifacts  
Reduction or Dig. Natural Motion,  
and press OK.  
1. Press SOURCE and Î or ï to select  
4. Press ï or Î to highlight Off or On,  
TV from the source list.  
and press OK to select.  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Select Advance Picture > Active  
Control and press OK.  
4. Press ï or Î to highlight Off, On or  
EN-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
if the sleep timer is enabled or time  
remaining for theTV to switch to standby  
mode.  
To cancel the sleep timer, select Off in  
the Sleep menu.  
Advance Picture  
Contrast +  
Active Control  
Artifacts Reduction*  
Dig. Natural Motion*  
Off  
On  
Set theTV time  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
5. Press Í to return to the previous menu  
2. Press ANALOG MENU to display the  
or press ANALOG MENU to exit.  
on-screen menu.  
3. Select Features > Timer > Time, and  
8.2 Use theTimer  
press OK.  
To switch the TV to standby mode or to a  
specified channel at a specified time from  
standby mode or while the TV is switched  
on.  
Timer  
Sleep  
Time  
Start Time  
Stop Time  
Channel No.  
Activate  
10 : 45  
Set the sleep timer  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
4. Press the numeric (0-9) buttons of the  
remote control to enter the time in the  
24-hour format. For example, 13:00 (for  
1.00 p.m).  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Sselect Features > Timer > Sleep, and  
press OK.  
5. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Timer  
Off  
15  
30  
45  
60  
Sleep  
Time  
Start Time  
Stop Time  
Channel No.  
Activate  
Set theTV timer  
1. Press SOURCE and Î or ï to select  
90  
TV from the source list.  
120  
180  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Select Features > Timer > Start  
4. Press ï or Î to select the number  
of minutes remaining before the TV  
automatically switches to standby mode  
and press OK to select.  
Time, and press OK.  
5. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
E Tip: Press STATUS / EXIT to check  
EN-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer  
Timer  
Sleep  
20 : 00  
Sleep  
Off  
Time  
Time  
Once  
Daily  
Start Time  
Stop Time  
Channel No.  
Activate  
Start Time  
Stop Time  
Channel No.  
Activate  
4. Press the numeric (0-9) buttons of the  
remote control to enter the time in the  
24-hour format. For example, 13:00 (for  
1.00 p.m).  
10. Press ï or Î to select Off, Once or  
Daily, and press OK to select.  
11. Press ANALOG MENU to exit.  
12. Press . to switch the TV to standby  
5. Press Í to return to the previous menu  
mode.  
and select StopTime, and press OK.  
Activate settings:  
Timer  
Sleep  
Time  
Start Time  
Stop Time  
Channel No.  
Activate  
21 : 40  
Off: Cancels the TV timer.  
Once:Activates TV timer once only.  
Daily:Activates TV timer everyday at  
this time.  
D Note: If theTV is switched on when  
the timer activates, theTV switches to  
the channel specied in theTV timer.TV  
timer settings are lost once theTV is  
switched off via the POWER button on  
theTV.  
6. Press the numeric (0-9) to enter the  
time.  
7. Press Í to return to the previous menu  
and select Channel No., and press OK.  
Timer  
Sleep  
Time  
2
8.3 Child-lock theTV  
Start Time  
Stop Time  
Channel No.  
Activate  
Prevent children from accessing the TV  
without adult supervision.  
Enable Child Lock  
1. Press SOURCE and Î or ï to select  
8. Press ï or Î to select the channel  
number to be activated at the specified  
time.  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
9. Press Í to return to the previous menu  
3. Select Features > Child Lock > and  
and select Activate, and press OK.  
press OK.  
EN-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.4 Control access toTV  
channels  
Features  
Timer  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
Off  
On  
Parental Lock lets you control the type of  
TV programs that can be accessed, according  
to program ratings based on age and content.  
Access Parental Lock  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
4. Press ï or Î to highlight On and press  
OK.  
2. Press ANALOG MENU to display the  
on-screen menu.  
5. Switch off the TV or put it on standby  
mode.  
3. Select Features > Parental Lock and  
press OK.  
D Note: Once Child Lock is enabled,  
you cannot access anyTV channels with  
the CH + / - buttons on theTV panel  
or operate any of its buttons except the  
POWER button.  
4. When using Parental Lock for the  
first time, enter the factory default code,  
0711 with the numeric (0-9) buttons.  
5. When Incorrect is displayed, enter  
TheTV displays “Locked” on the bottom  
of the screen.  
0711 again.  
Keep the remote control away from  
children to prevent access to the Child  
Lock menu.  
Features  
Timer  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
* * * *  
Incorrect  
Disable Child Lock  
1. Repeat the above as described in Enable  
Child Lock on the previous page.  
2. Press ï or Î to highlight Off and press  
6. Enter your own four digit code.  
OK.  
Features  
Timer  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
Features  
Timer  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
Off  
On  
New Code  
7. Enter your new code again to confirm.  
EN-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Lock.  
Features  
Timer  
Lock channels  
* * * *  
Confirmed  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
1. Access the Parental Lock menu as  
described in Access Parental Lock on the  
previous page.  
2. Press OK to select Lock Channel and  
press ï or Î to highlight the channel  
number.  
You can access the Parental Lock menu  
now.  
3. Press OK to lock the channel.  
A padlock symbol + is displayed beside  
the channel number.  
Change Access Code  
1. Access the Parental Lock menu as  
described in Access Parental Lock on the  
previous page.  
Parental Lock  
Lock Channel  
Change Code  
Clear All  
Lock All  
Movie Rating  
TV Rating  
002  
003  
004  
005  
006  
007  
008  
009  
2. Press ï to highlight Change Code and  
+
press OK to select.  
3. Enter your new four-digit access code  
Block Options  
with the numeric (0-9) buttons.  
Parental Lock  
Lock Channel  
Change Code  
Clear All  
Lock all channels  
- - - -  
New Code  
1. Access Parental Lock menu as  
described in Access Parental Lock on the  
previous page.  
Lock All  
Movie Rating  
TV Rating  
Block Options  
2. Press ï to highlight Lock All and press  
OK to select.  
4. Re-enter your new access code.  
Parental Lock  
Confirmed is displayed.  
Lock Channel  
Change Code  
Clear All  
Lock All  
Movie Rating  
TV Rating  
Yes  
Locked  
Parental Lock  
Lock Channel  
Change Code  
Clear All  
* * * *  
Confirmed  
Block Options  
Lock All  
Movie Rating  
TV Rating  
Block Options  
3. Press OK to select Yes.  
Unlock all channels  
ETip: If you forget your access code,  
1. Access Parental Lock menu as  
described in Access Parental Lock on the  
previous page.  
repeat all the steps as described in Access  
EN-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press ï to highlight Clear All and press  
A tick ($) appears beside the rating label  
OK to select.  
to indicate the rating lock is enabled.  
4. Press Í to return to the previous menu  
Parental Lock  
or press ANALOG MENU to exit.  
Lock Channel  
Change Code  
Clear All  
Lock All  
Movie Rating  
TV Rating  
Yes  
Cleared  
Parental Lock  
Lock Channel  
Change Code  
Clear All  
G
PG  
PG-13  
R
Block Options  
Lock All  
Movie Rating  
TV Rating  
NC-17  
X
Block Options  
3. Press OK to select Yes.  
D Note: A message is displayed to inform  
you that the channel is blocked when you  
try to access it.You can choose to enter  
the Parental Lock access code to view  
the program.  
D Note: Movies are blocked if they fall  
under the movie rating category that  
you enabled.A message is displayed to  
inform you that the program is blocked  
by the movie rating. Programs remain  
locked even after theTV is switched off.  
Enter the Parental Lock access code to  
view the program. Subsequently, all other  
locked programs are viewable.  
Channel 2  
Blocked By  
Channel Blocking  
Access Code : ----  
D Tip: Press STATUS / EXIT twice to  
check whichTV or movie ratings are  
enabled.  
Movie Rating  
G
TV Rating  
TV - Y  
8.5 Control access toTV  
programs  
Ins  
PG  
TV - Y7  
TV - G  
PG - 13  
TV - PG  
TV - 14  
TV - MA  
Unrated  
R
NC - 17  
X
Use the movie rating lock (for certain  
regions only)  
No Rating  
Control access to movies based on their  
content as defined by the Motion Picture  
Association of America (MPAA).  
Movie Rating:  
Settings apply to the TV and AV inputs only.  
G: Suitable for all ages.  
1. Access Parental Lock menu as  
described in Access Parental Lock on page  
35.  
PG: Some material may not be suitable  
for children.  
2. Press ï until Movie Rating is  
PG-13: Some material may not be  
suitable for children under 13 years of  
age.  
highlighted, and press OK to select.  
3. Press Î or ï to highlight your choice of  
movie rating label, and press OK.  
EN-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
based ratings, highlight only those and  
press OK.  
R: Material not suitable for children  
under 17 years of age. Requires parental  
guidance.  
TV Rating  
NC-17: Not suitable for children under  
17 years of age. Has excessive violence,  
sex or offensive language.  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Lock All  
V
S
L
D
X: Not suitable for children under 17  
years of age. Content is pornographic.  
Use theTV Rating lock (For certain  
regions only)  
TV-Y: Suitable for all children. Programs are  
not expected to frighten children.  
Block content based on TV ratings defined  
by your broadcaster.TV ratings are based on  
age and content.  
TV-Y7: For children 7 years or older who  
can tell make-believe from reality. Some  
mild fantasy violence or comedic violence.  
Programs may frighten younger children  
under 7 years of age.  
Age-based rating Content-based rating  
TV-Y  
None  
TV-Y7  
TV-G  
TV-PG  
FV (FantasyViolence)  
None  
TV-Y7 FV: Fantasy violence more intense or  
combative than those in TV-Y7 category.  
V (Violence)  
S (Sex)  
TV-G: Suitable for all children but not  
designed specifically for children.  
L (Strong Language)  
D (Sexual Dialog)  
V (Violence)  
S (Sex)  
TV-PG: Parental guidance needed. Some  
violence, strong language, sexual situations or  
suggestive dialog. Parents should watch these  
programs with their children.  
TV-14  
TV-14: Not suitable for children under 14  
years of age. Content has violence, strong  
language, sexual situations or suggestive  
dialog.  
L (Strong Language)  
D (Sexual Dialog)  
TV-MA  
V (Violence)  
S (Sex)  
L (Strong Language)  
TV-MA: For adult viewing. Not suitable for  
children under 17 years of age.  
1. Access Parental Lock menu as  
described in Access Parental Lock on page  
35.  
D Note: The screen displays a message  
that the program is blocked when  
your programs fall under theTV rating  
category that you enabled. Programs  
remain locked even if you turn off and  
turn on theTV again. Enter your access  
code to view the program.  
2. Press ï until TV Rating is highlighted,  
and press OK to select.  
3. Press ï or Î to highlight the TV rating  
label, and press OK to select.  
4. Press ï or Î to highlight Lock All and  
press OK to select.  
E Tip:To enable one or more content-  
EN-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Block Options  
Unrated  
No Rating  
Blocking  
Off  
On  
Channel 5  
Blocked By  
TV - 14  
Access Code : ----  
D Note: Programs with no rating or  
Unblock programs  
unrated are blocked.  
1. Access Parental Lock menu as  
described in Access Parental Lock on page  
35.  
Channel 5  
Blocked By  
No rating  
2. Press ï to select Block Options and  
press OK to select.  
Access Code : ----  
3. Press ï or Î to highlight Off and press  
OK.  
Block Options  
Unrated  
No Rating  
Blocking  
Off  
On  
8.6 Turn on closed captions  
Closed captions (CC) are subtitles hidden  
in the video signals which you can turn on  
or off unlike the normal subtitles in movies  
which cannot be turned off. Closed captions  
are subtitles for dialog and descriptions for  
the hearing-impaired.  
Block other programs  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
Block programs that are unrated, such as  
documentaries,director’s cut” edition or  
programs that have no advisory data (No  
Rating).  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Select Features > Closed Caption and  
1. Access Parental Lock menu as  
described in Access Parental Lock on page  
35.  
press OK.  
Features  
Timer  
CC Off  
CC1  
CC2  
2. Press ï to select Block Options and  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
press OK to select.  
CC Mute  
3. Press ï or Î to highlight Unrated or  
No Rating, and press OK to select.  
4. Press OK to select On.  
4. Press ï or Î to highlight CC Off, CC1,  
EN-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CC2 or CC Mute, and press OK to  
select.  
Demo  
Pixel Plus HD*  
Pixel Plus 2HD*  
Dig. Natural Motion*  
100Hz*  
Off  
On  
5. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Closed Caption choices:  
CC Off:Turn off closed captioning.  
CC1: Most channels transmit closed  
captions in CC1 mode. Closed captions  
can be in Spanish, Portuguese or English.  
When Demo modes are used, the TV  
displays a vertical split screen showing  
the new features enabled on one half and  
the other half without the features.  
CC2: Broadcasters may transmit closed  
captions in CC2 mode. CC2 is rarely  
used.  
6. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
CC Mute: Closed captions in CC1  
mode is displayed only when the sound is  
turned off via m.  
Demo modes  
Pixel Plus 2HD: Like Pixel Plus HD, but  
able to detect and reduce artifacts and  
noise in your HD content for cleaner  
and sharper pictures.  
8.7 Use the Demo modes  
The Demo mode lets you see the benefits  
of the new features of your TV.  
Pixel Plus HD: Every pixel is improved  
to match surrounding pixels for a more  
natural picture. Sharpness, depth and  
vivid colors are achieved from multiple  
sources like HD and DVD content.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
Dig. Natural Motion: Reduces the field  
and line flicker and reproduces smooth  
movement especially in movies. Set the  
level to Maximum, Minimum or Off.  
3. Select Features > Demo and press  
OK.  
4. Press ï or Î to highlight Pixel Plus  
HD, Pixel Plus 2HD, Dig. Natural  
Motion, or 100Hz, and press OK to  
select.  
100 Hz:Transmitted information is  
stored on a memory chip to produce  
flicker-free images.  
Features  
Timer  
8.8 Use Ambilight  
Pixel Plus HD*  
Child Lock  
Parental Lock  
Closed Caption  
Demo*  
Pixel Plus 2HD*  
Dig. Natural Motion*  
100Hz*  
Watch programs in a unique ambience by  
producing a soft, light glow from the sides of  
the TV.Ambient lighting from the TV provides  
a more relaxed viewing experience.The  
Ambilight colors changes automatically to  
match the TV images.  
5. Press ï or Î to highlight On and press  
OK to select.  
EN-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn on Ambilight  
1. Press SOURCE and Î or ï to select  
Ambilight  
Ambilight  
Brightness  
Mode  
TV from the source list.  
2. Press ANALOG MENU to display the  
Balance  
on-screen menu.  
3. Select Ambilight > On.  
Ambilight  
Ambilight  
Brightness  
Mode  
Off  
On  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Balance  
Select Ambilight modes  
1. Turn on Ambilight as described in Turn  
on Ambilight on this page.  
4. Press Í to return to the previous menu  
2. Press ï until Mode is highlighted and  
or press ANALOG MENU to exit.  
press OK to select.  
3. Press ï or Î to highlight the mode and  
Turn off Ambilight  
press OK to select.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
Ambilight  
Ambilight  
Brightness  
Mode  
Color  
2. Press ANALOG MENU to display the  
Relaxed  
Moderate  
Dynamic  
on-screen menu.  
Balance  
3. Select Ambilight > Off.  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
4. Press Í to return to the previous menu  
Adjust brightness  
or press ANALOG MENU to exit.  
1. Turn on Ambilight as described in Turn  
on Ambilight on this page.  
Ambilight modes  
2. Press ï until Brightness is highlighted  
Color: Produces constant lighting  
according to the settings in the Color  
menu.  
and press OK to select.  
3. Press ï or Î to adjust the ambient  
brightness level.  
Relaxed: Reduces brightness and  
color to give a more relaxed viewing  
experience.  
Moderate: Uses the factory-defined  
brightness and color settings.  
Dynamic:The brightness and color  
changes according to the picture state.  
EN-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Ambilight color  
1. Turn on Ambilight as described in Turn  
Custom Color  
Palette  
Saturation  
on Ambilight on the previous page.  
2. Press ï until Mode is highlighted and  
50  
press OK to select.  
3. Press ï until Color is highlighted and  
press OK to select.  
4. Press ï or Î to highlight the color.  
6. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
Ambilight  
Ambilight  
Brightness  
Mode  
Warm White  
Cool White  
Blue  
Ambilight Custom colors  
Color  
Custom Color  
Balance  
Red  
Palette: Adjusts the color mix.  
Green  
Yellow  
Magenta  
Custom  
Saturation:Adjusts the color intensity  
of light output.  
5. Press Í to return to the previous menu  
Set Ambilight balance  
or press ANALOG MENU to exit.  
Adjust the Ambilight intensity on both  
sides of the TV.  
Use Custom color  
1. Turn on Ambilight as described in Turn  
1. Turn on Ambilight as described in Turn  
on Ambilight on the previous page.  
on Ambilight on the previous page.  
2. Press ï until Balance is highlighted and  
2. Press ï until Custom is highlighted and  
press OK to enable the Custom Color  
menu.  
press OK to select.  
3. Press ï or Î to adjust the Balance.  
3. Press Í to highlight Color and press ï  
Ambilight  
Ambilight  
Brightness  
Mode  
to highlight Custom Color.  
Ambilight  
Color  
50  
Ambilight  
Brightness  
Mode  
Palette  
Saturation  
Custom Color  
Balance  
Color  
Custom Color  
Balance  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
4. Press ï or Î to highlight Palette or  
Saturation, and press OK to select.  
5. Press ï or Î to adjust the settings.  
EN-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.2 Feature settings (VGA  
mode)  
9. Use yourTV as a  
computer monitor  
Phase / Clock: Fine tunes your TV to  
match the computer’s display settings.  
Connect the TV to a computer via theVGA  
port to use your TV as a computer monitor.  
Auto Adjust: Synchronizes the TV  
and computer’s Phase/Clock rate  
automatically.  
D Note: Refer to the Quick Start Guide for  
connecting the computer to yourTV.  
Reset: Overrides with the factory  
default settings.  
1. Connect your computer to the TV via  
theVGA cable (not supplied).  
2. Press SOURCE to display the audio and  
Main  
Picture Setting  
Sound  
Features  
Location  
video source list.  
Timer  
Child Lock  
Parental Lock  
Phase  
Source List  
TV  
AV  
Clock  
SIDE AV  
Auto Adjust  
Reset  
CVI 1  
CVI 2  
VGA  
HDMI 1  
HDMI 2  
D Note: For supported resolutions, refer  
to Specications..  
3. Press ï or Î until VGA is highlighted  
and press OK to select.  
You should see your computer display on  
the TV screen.  
9.1 Picture settings (VGA  
mode)  
Horizontal:Adjusts the picture to the  
left or right.  
Vertical:Adjusts the picture upwards or  
downwards.  
Main  
Picture Setting  
Sound  
Brightness  
Contrast  
Features  
Location  
Horizontal  
Vertical  
Color Temp  
EN-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
and Í or Æ to adjust the settings.  
10. Use yourTV in High  
Definition mode  
4. Press Í to return to the previous menu.  
5. Press Í to return to the previous menu  
High Definition (HD) mode lets you enjoy  
clearer and sharper pictures using HD  
equipment.  
or press ANALOG MENU to exit.  
Picture menu  
The Picture menu options are:  
Brightness, Color, Contrast,  
Sharpness, Horizontal, Vertical and  
Color Temp.  
10.1 Connect the HD  
equipment  
1. Connect the HDMI or DVI output from  
your HD equipment to the HDMI 1,  
HDMI 2 or Side HDMI socket of the  
TV.  
All the options work the same way as  
the ones in Picture menu except for  
Horizontal and Vertical.  
Use a DVI-to-HDMI cable if DVI output  
is connected.  
Horizontal lets you adjust the  
horizontal position of the image.  
2. Connect the audio cable to the L /  
R audio jacks (AV) of the TV if you  
are using DVI output from your HD  
equipment to connect to the TV.  
Vertical lets you adjust the vertical  
position of the image.  
Sound menu  
The Sound menu options are  
3. Press AV to display the Source List and  
the Î or ï to select HDMI 1, HDMI 2  
or Side HDMI.  
Equalizer, Balance, AVL and Incr.  
Surround.All the options work the  
same way as the ones in the TV Sound  
menu.  
Source List  
Side AV  
CVI 1  
CVI 2  
VGA  
HDMI 1  
HDMI 2  
Features menu  
Side HDMI  
D i g i t a l TV  
The Features menu options are Timer,  
Child Lock, Parental Lock and Active  
Control.All the options work the same  
way as the ones in the TV Features  
menu except for Mode Selection.  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
10.3 Use Mode Selection  
10.2 Control theTV settings in  
HD mode  
Mode Selection options are available in  
the Features menu when you connect HD  
equipment via HDMI supporting resolutions  
of 480p, 720p or 1080p.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
You can select PC or HD mode.  
2. Press Î or ï to select Picture, Sound  
or Features, and press OK to select.  
1. Press SOURCE and Î or ï to select  
TV from the source list.  
3. Press Î or ï to highlight the settings  
EN-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press ANALOG MENU to display the  
1080p models  
on-screen menu.  
HD  
format  
480p 576p 720p 1080p 1080i  
3. Select Features > Mode Selection >  
PC or HD, and press OK.  
SD  
format  
480i  
576i  
Features  
PC  
Timer  
HD  
Child Lock  
Parental Lock  
Mode Selection  
Closed Caption  
Display  
Note:Your PhilipsTV is HDMI compliant.  
If you do not get a good picture, it is not a  
defect of yourTV set.  
Please change the video format on your  
device (DVD player, cable set top box, etc) to  
a standard format.  
For example, you should select 480p, 576p,  
720p, 1080i or 1080p for DVD players.  
Demo*  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
10.4 Use Native 1080 mode  
10.5 Use Philips EasyLink  
Your TV is enabled for HDMI-CEC  
connections with other devices.The following  
features apply to devices that are CEC-  
compliant and connected to your TV through  
an HDMI cable.  
The Native 1080 option in the Display  
menu is available when you connect HD  
equipment via HDMI orY Pb Pr supporting  
resolution of 1080i.Watch the original HD  
format in true resolution from the input  
signals.  
One-touch play  
1. Press SOURCE and Î or ï to select  
You can control your TV and the devices  
with one remote control when you connect  
your TV to devices that support One-touch  
play. For example, when you press the play  
button on your DVD remote control, your  
Philips TV automatically switches to the  
correct channel to display the DVD content.  
TV from the source list.  
2. Press ANALOG MENU to display the  
on-screen menu.  
3. Select Features > Display > On to  
watch your programs in the original HD  
format (1080p).  
One-touch Standby  
Features  
You can use your TV’s remote control to put  
the devices into standby when you connect  
your TV to devices that support One-touch  
standby. Press and hold the . on the TV’s  
remote control for 3-4 seconds.  
Timer  
Native 1080  
Child Lock  
Parental Lock  
Mode Selection  
Close Caption  
Display  
Demo*  
4. Press Í to return to the previous menu  
or press ANALOG MENU to exit.  
EN-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Troubleshooting  
D Note: Before calling Customer Service,  
refer to the troubleshooting topic below  
which may help address and resolve your  
problem.  
Symptoms  
Possible cause  
What should you do  
No power or  
indicator light.  
The TV is not  
connected to the  
power.  
1. Press . at the right side of the TV, or press . on the  
remote control.  
2. Ensure the power cord is connected tightly to the TV  
power connector and to the mains socket outlet.  
3. Connect the TV to a different mains socket outlet.  
1. Ensure that your HDMI cable is certified.  
Error message on  
the screen with  
HDMI connection.  
High-Bandwidth  
Digital Content  
Protection (HDCP)  
authentication fail.  
2. Press SOURCE on the remote control to switch to  
another source and then switch back to the HDMI source.  
3. Reset the accessory device and the TV.  
Turn on the TV  
Select the HDMI channel  
Turn on the accessory device  
No sound is  
detected from the  
PC.  
Incorrect HDMI  
port is connected.  
1. Connect a DVI-HDMI cable to the correct HDMI port  
on the TV.  
Audio cable is not  
connected.  
2. Connect an audio cable to the DVI AUDIO IN port on  
the TV.  
3. Press SOURCE on the remote control, and select any  
one of the HDMI sources.  
TV does not  
Batteries are  
1. Ensure the indicator light on the TV blinks when the  
respond to the  
remote control.  
installed incorrectly, remote control buttons are pressed.  
or low battery  
2. Ensure that you are using the remote control supplied  
power.  
with the TV.  
3. Ensure that the batteries of the remote control are  
inserted according to the illustration on the remote  
control and that the batteries are new.  
The picture is  
distorted. It is  
Broadcast video  
format.  
1. Press Í or Æ on the remote control to select the best  
picture format.  
stretched out, has  
short, fat, black bars  
on the side or top.  
2. For certain accessory devices, the picture format has to  
be set in the accessory device itself.  
EN-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The picture is  
mostly red and  
Insecure/incorrect  
connection.  
1. Ensure all the connections are made according to the  
color code.  
green, or the  
2. Push the component cables all the way into theYPbPr  
sockets on the TV.  
picture is missing  
red when the TV  
is connected to an  
accessory device via  
component cables.  
No sound on the  
TV loudspeaker.  
Volume level is set 1. Increase the volume.  
to zero.  
Sound is muted.  
2. Press m on the remote control.  
Headphones are  
connected.  
3. Ensure the headphones are not plugged into the TV.  
Audio cable is not  
connected.  
4. For AV connection, ensure that the Audio L/R cable is  
connected. If you are using a component cable, ensure that  
you have not crossed the red audio cable with the red  
video cable.  
Accessory device  
audio output  
5. For HDMI connections, certain accessory devices have  
an HDMI audio output setting that must be turned on for  
setting is incorrect. HDMI to HDMI connections.  
Bad picture quality  
with a coaxial  
connection.  
Standard definition 1. Connect the devices via component or HDMI cables.  
channels are not  
as clear as high  
definition channels.  
No picture or  
sound.  
Incorrect channel  
1. Ensure you have selected the correct channel.  
Incomplete channel 1. If the TV receives channels via an AV connection, set  
installation.  
the TV to the correct source input and perform auto  
installation again.  
2. If the TV is connected directly to the wall via a coaxial  
connection, perform auto-installation again.  
Cannot control  
your TV and  
connected devices  
with one remote  
control.  
1. Confirm that the connected devices are EasyLink  
compliant and are connected to your TV via an HDMI  
cable. Not all brands of devices such as DVD players use  
the same system as Philips EasyLink. Other brands might  
not work with Philips EasyLink.  
EN-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Specifications  
Model no.  
42PFL7803D  
52PFL7803D  
PICTURE ENHANCEMENT  
Type  
1080p 120 Hz  
16:9  
Aspect Ratio  
Advance Picture  
Ambilight  
Contrast +,Active Control, Dig. Natural Motion,Artifacts Reduction  
Yes  
SOUND ENHANCEMENT  
Mono, Stereo, Incredible Surround, BBE, wOOx  
2 x 15 W  
Mono/Stereo/BBE  
Power output (RMS Watts)  
EASE OF USE  
Video modes  
PC input  
Automatic, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle  
Zoom, Super Zoom,Wide Screen  
via HDMI,VGA  
CONNECTIONS  
CVI In with Audio L/R  
2, supporting 480i/p, 576i/p, 720p, 1080i, 1080p @24Hz-60Hz  
CVBS In with audio L/R, S-Video  
HDMI  
2 X  
3 ver1.3a HDMI supporting video: 480i/p, 576i/p, 720p, 1080i, 1080p  
@24Hz-60Hz, PC-input: up to WUXGA  
Digital audio out  
Headphone  
Yes, supporting AC-3 & PCM  
1 X (Side)  
MISCELLANEOUS  
100-240V, 50/60 Hz  
~ typ 0.165W  
Operating power consumption  
Standby power [Watt]  
Accessories  
Power cord, Quick Start Guide, User Manual, Remote  
control,AAA batteries x2  
DIMENSIONS  
Set weight (kg)  
20.5  
26  
39  
47  
Set weight with stand (kg)  
Set dimensions  
1046 x 645 x 108  
1,301 x 798 x 141  
(W x H x D) mm  
Set dimensions with stand  
(W x H x D) mm  
1046 x 716 x 262  
1,301 x 875 x 325  
D Note: Specications subject to change without notice.  
EN-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Connect devices  
13.1 Connection overview  
7
8
9
HDMI 1  
HDMI 2  
11  
6
5
SPDIF OUT  
AUDIO IN  
VGA  
10  
PBS SX SERV. C  
R
L
Y
Y
12  
13  
14  
HDMI  
1
Pb  
Pr  
L
Pb  
Pr  
L
SPDIF OUT  
A
U
D
I
O
I
N
P
B
S
S
X
S
E
R
V
.
C
R
Y
Pb  
Pr  
L
VIDEO  
75X  
TV ANTENNA  
R
75X  
CVI-1  
TV ANTENNA  
L
R
R
R
CVI-1  
CVI-2  
AV1 IN  
1
2
3
4
1. Antenna input  
2. CVI-1: Component video input. Y Pb  
12. Headphones (Side): Stereo Mini Jack.  
13. Video (Side):Video input connector  
to be used together with Audio L/R  
connectors for camcorder, game console,  
etc.  
Pr and Audio L/R connectors for DVD,  
digital receiver or game console, etc.  
3. CVI-2: Second component video input.  
14. S-Video (Side): S-Video input  
connector to be used together with  
Audio L/R connectors for camcorder,  
game console, etc.  
4. AVI IN: Composite video input to be  
used together with Audio L/R connectors  
for camcorder, game console, etc.  
5. SPDIF Out: Digital audio out.  
6. Audio IN forVGA.  
13.2 Select connection quality  
7. Service ports (For service personnel)  
You can enhance your audio visual  
experience by connecting your devices with  
the best possible connectors.  
8. HDMI 1 In: HDMI in connector for Blu-  
ray Disc player, HD digital receiver or  
game console, etc.  
After connecting your devices, be sure to  
enable them as described in the Quick Start  
Guide.  
9. HDMI 2 In: Second HDMI in connector.  
10. VGA:Video Graphics connector for  
personal computers.  
11. HDMI In (Side): See HDMI 1 In  
description.  
EN-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI - Highest quality  
Component video cable - Red, Green, Blue  
HDMI produces the best audio visual quality  
possible. Both audio and video signals are  
combined in one HDMI cable, providing an  
uncompressed, digital interface between  
your TV and HDMI devices. Use HDMI to  
experience full high-definition video.  
E Tip: If your device only has a DVI con-  
nector, use a DVI-HDMI adaptor to con-  
nect your device to a HDMI connector  
on theTV.As such a connection does  
not support sound, you must connect a  
separate audio cable from the device to  
the Audio L/R input at the AUDIO IN  
connectors on theTV.  
Audio L/R cable - Red,White  
S-Video - Good quality  
S-Video provides better picture quality than  
that of composite video.When connecting  
your device with S-Video, plug the S-Video  
cable to the S-Video connector on the side  
of the TV.You must connect a separate Audio  
L/R cable from the device to the red and  
white Audio L/R input connectors on the  
side of the TV.  
E Note: Philips HDMI supports HDCP  
(High-bandwidth Digital Contents Protec-  
tion). HDCP is a form of Digital Rights  
Management that protects high denition  
content in DVD or Blu-ray Discs.  
Component (YPbPr) - Higher quality  
Component (Y Pb Pr) video provides better  
picture quality than S-Video or composite  
video connections.Although component  
video supports high-definition signals, the  
picture quality is analog and lower than that  
of HDMI.  
When connecting a component video  
cable, match the cable colours to the CVI  
connectors on the back of the TV. Also,  
connect a Audio L/R cable to the red and  
white Audio L/R input connectors at CVI.  
S-Video cable  
EN-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Composite - Basic quality  
Composite video provides basic analogue  
connectivity, usually combining a (yellow)  
video cinch cable with (red and white) Audio  
L/R cinch cable. Match the cable colors when  
connecting to the composite Video and  
Audio L/R input connectors on the side of  
the TV.  
Audio L/R cable - Red,White  
Composite audio/video cable-Yellow, red  
and white  
D Note: For various device connections to  
yourTV, please refer to the Quick Start  
Guide for detailed instructions.  
EN-51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3139 125 39891  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco DVR C2631M A User Manual
Philips Home Theater System HTS3548W User Manual
Philips Portable DVD Player PET7402 05 User Manual
Philips Power Supply ADAT 4 User Manual
Philips TV Antenna SDV2510 27 User Manual
Philips TV VCR Combo 14PV401 User Manual
Polycom Mobility Aid 1725 36055 001 User Manual
Praktica Digital Photo Frame D00461 User Manual
ProForm Home Gym PFB38031 User Manual
PYLE Audio Automobile Accessories PNVU400 User Manual