Register your product and get support at
PhotoFrame
8FF2FPB
8FF2FP
EN
User manuals
1
Download from Www.Somanuals.com. All Manuals Search And Download.
• When positioning the PhotoFrame, make
sure the power plug and outlet are easily
accessible.
Introduction
• To avoid the risk of shock or permanent
damage to the set, do not expose the
PhotoFrame to rain or excessive moisture.
Philips digital PhotoFrame can be placed either
vertically or horizontally to fit the photos on
display.You can place it somewhere in a room
for a continuous display by connecting it to the
mains power supply.
•
For wall mounting,please use a
7.0*25*3.0mm screw and for best result,
please screw over seven turns.
1
1.
Important
1.1
Safety precautions and
maintenance
Read and follow these instructions when
connecting and using your PhotoFrame:
• To protect your display from possible damage,
do not put excessive pressure on the LCD
panel.When moving your PhotoFrame,
grasp the frame to lift; do not lift the it by
placing your hand or fingers on the LCD
panel.
• Unplug the PhotoFrame if you are not going
to use it for an extensive period of time.
• Unplug the PhotoFrame if you need to clean
it with a slightly damp cloth.The screen may
be wiped with a dry cloth when the power
is off. However, never use alcohol, solvents or
ammonia-based liquids.
1.2
Care of the PhotoFrame
Do not drop
PhotoFrame is a complicated electronic
device and cannot withstand shock from
being dropped.
1
Do not expose to moisture
2
PhotoFrame is neither moisture proof nor
moisture resistant. Exposing it to moisture
or liquid of any kind will very likely damage
your PhotoFrame.
• Consult a service technician if the
PhotoFrame does not operate normally
when you have followed the instructions in
this manual.
• The casing cover should be opened only by
qualified service personnel.
• Keep the PhotoFrame out of direct sunlight
and away from stoves or any other heat
source.
Do not hit or scratch
3
4
The LCD panel of PhotoFrame is made of
glass and is therefore sensitive to abnormal
force and sharp edges.
Screen cleaning
Use only a dry soft cloth to clean your
screen.
• Keep the PhotoFrame dry.To avoid electric
shock, do not expose it to rain or excessive
moisture.
Important
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep the stand clear from cables
Make sure the stand of your PhotoFrame
is clear from cables as cables could pull the
stand out of PhotoFrame to the floor.
5
6
Temperature and humidity limitations
Operating temperature:
0° ~ 40° (Celsius) / 32° ~ 104° (Fahrenheit)
Humidity: 20% ~ 80%
1.3
Recycling
• The PhotoFrame uses materials that can be
recycled.To minimize the amount of waste
in the environment, check your area for
companies that will recover used televisions
for dismantling and collection of reusable
materials, or contact your dealer for recycling
tips.
• Please dispose of the carton and packing
material through the proper waste disposal
management in your area.
ꢀ
Important
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
YourPhotoFrame
2.1
What’s in the box
Register your product and get support at
PhotoFrame
8FF2FPB
8FF2FPW
EN User manuals
1
Power adaptor
Digital PhotoFrame
User manual
What else you’ll need
AC
Power outlet
Digital Photos on memory card or PC
Your PhotoFrame
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2
Control Buttons and Menu
Navigation
2.3
Connections
2.3.1 Memory Card
Photo display (underside)
A
B
• Use your PhotoFrame by pressing the control
buttons in the back.
• The control buttons and instructions are
shown at the bottom of the menu screen.
A.CF Card(Type I)
B.SD/MMC/MS/xD Card
Inserting amemory card:
• Insert the memory card into the slot in the
frame.
• For xD, SD, MMC, MMC+, or Memory Stick
cards slide the card until it locks in place.
• After a few seconds, photos on the memory
card will display and a slideshow will start.
DO NOT remove the memory card immediately
after inserting it in to the PhotoFrame or when
PhotoFrame is counting the Photos.Wait until
the screen is stable
Use the navigation controller to move
between the menus. Move it left and right to
cycle through the menu tree.
Removing a memory card:
• To remove the
Stick card,
or Memory
xD, SD, MMC, MMC+,
pull out the card.
Note :
To be able to delete photos from the memory
card it must NOT be locked.To unlock the card
follow the manufacturer’s instructions.
Your PhotoFrame
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
2.3.2 USB
2.4
Product highlights
For Windows PC (XP & Vista):
The PhotoFrame is designed to be flexible and
convenient to use and it provides the following
features:
• High pixel density for sharp and crisp photo
display.
• Connect PhotoFrame to a PC via a
USB cable (not supplied) where it will be
recognized as a mass storage device.
• For installation and more details about his
application, follow instrustions in user manual.
• View photos directly from memory cards
– no PC needed.
• Auto-Tilt function so portrait and landscape
photos are displayed in the best possible way.
• Rotating stand for best possible way of
viewing photos.
• Clock and alarm.
PhotoFrame
PC
For Mac System: (OS X):
• Connect PhotoFrame to the Mac via a USB
cable (not supplied) where it will be recognized
as a mass storage device.
• Select the photos to be transferred and copy
them directly under the root directory of
the storage card. (Only JPEG formatted
images supported).
• Disconnect the USB cable(not supplied).
Note:
Do not disconnect PhotoFrame when copying
or transferring Photo between PC and
PhotoFrame.
7
Your PhotoFrame
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4
Initial Setup
ꢀ.
Getting started
3.4.1 Setup the Language
Press the Mode button to toggle to the Main
Menu, select the Setup and press Play/OK
to Language.
3.1
Placing the Product
The PhotoFrame should be placed on a flat
surface and close to a power socket. Keep it
away from high temperatures and high levels of
moisture
Navigate Up and Down to select your
1
preferred language (select between English,
French, Spanish, Italian, German, Russian,
Dutch, Danish, Simplified Chinese and
Japanese)
3.2
Connecting to the mains
Connect the supplied power cable from
PhotoFrame to a power outlet.
2
3
1
Press the Play/OK button to confirm
2
your selection.The new setting will be effective
immediately.
Note:
For safety reasons and best stability Philips
recommend to adjust the stand with the angle
defined by the two click positions. Using other
positions may cause the PhotoFrame to fall and
it is the responsibility of the user.
Press the Mode button to leave this menu and
play the slideshow.
3.4.2 Access Menus
3.3
Turning on your PhotoFrame
There are two ways to access the menu.To
quick access the menu while you are viewing
photos, press the Menu button to see the menu
options for photo editing or slideshow settings.
To access the menu options starting from the
main menu:
Press the power button.
Press the Mode button.
1
2
Navigate Down to highlight the required
menu (Clock, Photos and Setup).
Press Play/OK to access the menu.
To exit from the menus press the Mode
button again to return to the slideshow.
3
Getting Started
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Date:
SetTime, Date and Alarm
Use this function to set the time and date of the
PhotoFrame
• Navigate Up and Down to select the
date.
• Navigate Left and Right to move
between days, months and years.
• Press the Play/OK button to confirm.
• Press the Mode button to access the
1
Main
Menu.
• Navigate Down to highlight Clock and
press Play/OK.
Press the Mode button to leave this menu
and play the slideshow.
• From the Clock screen, press Play/OK.
• Navigate Down to Time and Date.
• Navigate Right to Time/Date/12/24 hr/
2
Note:
The time and date must be set before the Alarm
Clock can be set.
Slideshow Clock
and press the Play/OK
button.
• From the Clock screen, press Play/OK.
• Navigate Up to Alarm Clock.
4
• Navigate Right to Time/Day/On/Off
and press the Play/OK button.
Time:
3
• Navigate Up and Down to select the
time.
• Navigate Left and Right to move
between hours and minutes.
• Press the Play/OK button to confirm.
Time Mode:
Navigate Up and Down to select
12/24 hr.
Getting Started
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Time:
5
1. To quick access the clock when in slideshow,
press Play/OK twice.
2. To access the clock from the Main menu:
• Navigate Up and Down to select the
time.
• Navigate Left and Right to move
between hours and minutes.
• Press the Play/OK button to confirm.
Day:
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to highlight
and
Clock
press Play/OK.
• Navigate Up and Down to select
Everyday, Weekday, or Weekend.
• Press the Play/OK button to confirm.
On/Off :
• Navigate up or down to select Off or On.
• Press the Play/OK button to confirm.
• From the Clock Menu screen:
2
• Navigate Down to Time and Date.
• Navigate Right to Time/Date/12/24 hr
/Slideshow Clock and press e Play/OK
button.
• Navigate Up and Down to select
3
Slideshow
and press Play/OK.
• Navigate Up and Down to select No or
Clock
Press the Mode button to leave this menu
and play the slideshow.
Yes.
• Press the Play/OK button to confirm
selection.
3.4.3 Choosing Clock Mode
The clock can either be viewed in the Full
screen or Slideshow :
Full Screen – displays the clock in top left of
the screen and a pre-selected photo will be
displayed.
Slideshow - displays the clock in the bottom
right of the screen.
Press the Mode button to leave this
menu and play the slideshow, browse or
clock mode.
There are two ways to display photo in the
clock mode:
Getting Started
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Note 2:
ꢁ.
Using your PhotoFrame
Photos are easily editable from slideshow mode
by pressing the Memu button.To go directly
to thumbnail mode form read the section of
“ 5.2 Photo Menu ”.
4.1
View Photos
View pre-stored photos
Press the Mode button to go to the Main
Menu.
1
4.2.3 Browse Mode
In the Main Menu select photos, select the
2
source as the type of memory card installed To display photos in
mode.
Clock
(SD/MMC,CF Card, Memory Stick, xD Cards
).
In slideshow mode, use the Left and Right
1
to move quickly through the photos.
Press Play/OK to the access Browse Mode,
press again to go to the clock mode.
Press Play/OK, to play the photos in
slidehow mode.
3
2
4.2.4 Thumbnail Access and Navigation
4.2
Find a Photo
A large number of Photos can be viewed quickly
using thumbnail mode
4.2.1 Browse Mode
• Press the Mode button to access the
Main Menu.
1
When displaying photos in the slideshow,
move through the photos, navigating Left
and Right to find and select a photo.
Press Play/OK to toggle between the
1
2
• Navigate Up to Photo and press the
Play/OK button.
Slideshow Clock and Browse modes.
,
4.2.2 Slideshow Mode
Slideshow mode is entered once you turn on
the PhotoFrame. Navigate Left and Right to
move quickly through the photos.
Note 1:
The frequency of the slideshow can be adjusted.
To do so please read “ 6.3 Frequency”
section.
Getting Started
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Navigate Down to select the photo
source to browse.
4.3.1 Copy from a Memory Card to your
PhotoFrame
2
• Press Play/OK to access the source.
Insert a memory card into the
Photoframe
1
Press Mode to go to the
.
2
3
Main Menu
and then go to the photo
Select the
source.
Photo
Go to thumbnail mode to select a photo.
Press Menu to access the menu options for
photo editing.
4
5
Select Copy to
Select PhotoFrame
Press Play/OK
6
7
8
• Navigate Left, Right, Up and Down
to move between photos and see a larger
version of the image.
3
Note:
PhotoFrame has very limited storage space
available. It only stores 1-3 photos
Press the Mode button to leave this
menu and press again to start playing the
slideshow.
4.3
Copy Photos
When connected to a PC the PhotoFrame is
treated as a mass storage device. From the
computer, JPEG images can be copied to a
memory card inserted into the PhotoFrame.
Using yout PhotoFrame
12
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press the Menu button and navigate
Down to Delete.
4.4
Delete Photos using the
PhotoFrame
3
• Press Play/OK
• Navigate Up or Down to Yes or No.
Press Play/OK.
If you need to free up space on a memory card
you can delete photos.
• Navigate Right to Yes to confirm the
deletion and press Play/OK.
• Press the Mode button to access the
Main Menu .
1
• Navigate Up to Photo and press the
Play/OK button.
Press the Mode button to leave this menu
and play the slideshow.
The delete function is disabled when you first
use your Photoframe.To enable the delete
function:
• Navigate Down to select the media to
browse and press Play/OK.
• Press the Up, Down, Left or Right keys
to find the image you want to delete.
2
Press Mode to go to Main Menu.
1
2
3
4
5
Press Down to Setup.
Navigate
to Select To Delete.
Up
Press Play/OK to go to the option list.
Select Play/OK.
Using yout PhotoFrame
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating
• Press the Mode button to access the
ꢂ.
Use more of your
PhotoFrame
1
Main Menu.
• Navigate Up to Photo and press the
Play/OK button.
5.1
Menu Navigation
The menu is navigated using the navigation
controller and the menu buttons.When in a
menu follow the onscreen instructions in the
bottom right of the screen for details on how to
navigate.
• Navigate the controller Left and Right to
cycle through the menus.
• Navigate Down and Up to select options.
• Press the Menu button to go to the main
menu.
• Press the Play/OK button to make a
selection.
• Navigate Down to select the media to
browse and press Play/OK.
• Press the Up, Down, Left or Right keys
to find the image you want to rotate.
2
• Press the Mode button to exit the current
menu and play a slideshow.
5.2
Photo Menu
5.2.1 Rotate, Zoom and Crop
PhotoFrame can change the orientation of
photos and change the framing of photos.
Note:
The crop function only applies to original photos
stored on external memory card.
Using more of your PhotoFrame
14
Download from Www.Somanuals.com. All Manuals Search And Download.
• Press the Menu button and navigate Up
to Rotate.
3
• Navigate Down to select the media to
browse and press Play/OK.
2
• Press Play/OK or navigate Right.
• Navigate Up or Down to the rotation
required. Press Play/ OK.
• Press the Up, Down, Left or Right keys
to find the image you want to rotate.
• Press the Menu button and navigate Up
to Zoom and Crop.
3
Press the Mode button to leave this menu
and play the slideshow.
• Press Play/OK or navigate Right.
• Navigate Up or Down to the zoom in
and out as required. Press Play/OK.
• Navigate Up, Down, Left and Right to
pan around the image. Press Play/OK to
apply.
Zoom and Crop
Note 1:
To retain image quality it is recommended that
zooming and cropping is carried out before the
image is stored in the PhotoFrame.
• Navigate Right to Yes to confirm the
crop and return to the thumbnail images.
Note 2:
All photos processed and copied by the
PhotoFrame will be resized for optimal display
on PhotoFrame and to save storage space.
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to Photo and press the Play/
OK button.
Press the Mode button to leave this menu
and play the slideshow.
Using more of your PhotoFrame
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2.2 Photo Effects
• Press the Menu button and navigate Up
to Photo Effects.
3
This section describes how to apply the Sepia
photo effect to your photos.
• Press Play/OK or navigate Right.
• Navigate Up or Down to the required
effect. Press Play/OK to confirm and
return to the thumbnail images.
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to Photo and press the Play/
OK button.
Press the Mode button to leave this menu
and play the slideshow.
• Navigate Down to select the media to
browse and press Play/OK.
2
Note:
Effects can be removed by selecting “No effect”.
• Press the Up, Down, Left or Right keys
to find the image you want to apply an
effect to.
5.2.3 Frames
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to Photo and press the Play/
OK button.
16
Using more of your PhotoFrame
Download from Www.Somanuals.com. All Manuals Search And Download.
• Navigate Down to select the media to
browse and press Play/OK.
2
• Press the Up, Down, Left or Right keys
to find the image you want to add the
frame to.
• Press the Menu button and navigate Up
to Frames.
3
• Press Play/OK or navigate Right.
• Navigate Up or Down to the required
frame. Press Play/OK to confirm and
return to the thumbnail images.
Press the Mode button to leave this menu
and play the slideshow.
Note:
Frames can be removed by selecting no frame.
Using more of your PhotoFrame
Download from Www.Somanuals.com. All Manuals Search And Download.
17
• Navigate Down to access Sequence and
navigate Right.
• Navigate Up and Down to select either
Sequential or Random.
2
ꢃ.
Settings
Use this section to setup the PhotoFrame
slideshow squences, transition effects, frequency
of the change of image, collage effects,
background color, brightness levels, display
language, enable the delete function on your
memory card, automatically turn on and off,
check the PhotoFrame status , tilt functions,
turning off the beep sound and turning on and
off the key help screen when first starting the
PhotoFrame
• Press Play/OK to confirm.
6.1
Slideshow Sequence
Press the Mode button to leave this menu and
Slideshows can be played in one of two ways
randomly or sequentially.
play the slideshow.
• Press the Mode button to access the
6.2
Transition Effects
1
Main Menu.
• Navigate Up to Setup and press the
Play/OK button.
The photos can appear on the screen using
special transitions.
• Press the Mode button to access the
1
Main Menu.
• Navigate Up to
Setup
Play/OK button.
and press the
18
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
• Navigate Down to access Transition and
navigate Right.
6.3 Frequency
2
• Navigate Up and Down to select
from the list as follows: NoTransition,
Random, Sliding, Snail, Fading,
Translation, Corner Sliding, or Grid.
• Press Play/OK to confirm.
Use this function to select how long each photo
is displayed during the slide show.
• Press the Mode button to access the
1
Main Menu.
• Navigate Up to
Setup
Play/OK button.
and press the
Press Mode button to leave this menu
and play the slideshow.
• Navigate Down to access
2
Frequency
and navigate Right.
Note 1:
• Navigate Up and Down to select 1 Day,
5 seconds, 10 Seconds, 30 Seconds,
1 Minute, 5 Minutes, 30 Minutes, 1
Hour, 4 Hours or 12 Hours.
This function applies to all the slideshows stored
on all media.
Note 2:
• Press Play/OK to confirm.
Random plays different effects out of sequence
during the slideshow transition.
Press the Mode button to leave this menu
and play the slideshow.
Note:
This function applies to all the slideshows stored
on all media.
Settings
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6.4 Collage
6.5 Background Color
To show multiple photos arranged on the screen Use this function to select the background
at the same time select collage.
border color for photos that are smaller than
the PhotoFrame display (these photos appear
with black borders).
• Press the Mode button to access the
1
Main Menu.
• Navigate Up to
and press the
• Press the Mode button to access the
Setup
1
Play/OK button.
Main Menu.
• Navigate Up to Setup and press the
Play/OK button.
• Navigate Down to access Collage and
navigate Right.
2
• Navigate Up and Down to select Off or
Random.
• Navigate Down to access Background
and navigate Right.
2
• Press Play/OK to confirm.
• Navigate Up and Down to select White,
Black, Gray,AutoFit or Radiant
Color.
• Press Play/OK to confirm.
Press the Mode button to leave this menu
and play the slideshow.
Note:
Press the Mode button to leave this menu
If you select random the PhotoFrame will
and play the slideshow.
randomly use different collage layouts.
20
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6.6 Brightness
6.7 Language
Change the brightness settings of the
PhotoFrame to achieve the best visibility
depending on the light conditions.
Use this section to choose the menu language of
the PhotoFrame.
• Press the Mode button to access the
1
• Press the Mode button to access the
Main Menu.
Main Menu.
• Navigate Up to
1
Setup
and press the
• Navigate Up to Setup and press the
Play/OK button.
Play/OK button.
Navigate Down to go to Language.
2
• Navigate Down to access Brightness
and navigate Right.
2
• Navigate Up and Down to select the
brightness of the screen from 1 ~ 5
• Press Play/OK to confirm.
Press the Mode button to leave this menu
and play the slideshow.
Settings
ꢄꢄ
21
Download from Www.Somanuals.com. All Manuals Search And Download.
• Navigate Right to enter the Language
menu.
NavigateDown to
2
.
To Delete
3
• Navigate Up and Down to select your
preferred language (select between
English,French ,
,
,
German Italian
,
,
Japanese Russian
Simplified Chinese,
,
,
).
Spanish
andDanish
Dutch
• Press the
button to confirm
Play/OK
your selection.The new setting will be
effective immediately.
• Navigate Right and select Not Allow
3
or
.
Allow
• PressPlay/OKto confirm choice.
Press the Mode button to leave this menu
and play the slideshow.
6.8
Memory Card
Press the Mode button to leave this menu
Use this feature to allow the delete function on
the inserted memory card
and play the slideshow.
Delete Permission
6.9
Timer Function (Auto dim)
• Press the
button to access the
Mode
1
.
Depending on your lifestyle and schedule,
you may want to have the PhotoFrame to
automatically turn ON and OFF for you.
Main Menu
• NavigateUpto Setup and press the
Play/OK button.
Note:
Local time must be set correctly before setting
up this feature (see time and date section in the
setup menu).
Settings
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the ON and OFF times
• Navigate Up and Down to adjust the
hours.
• Navigate Right to move to minutes.
• Navigate Up and Down to adjust the
minutes.
4
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to Setup and press the
Play/OK button.
• Press Play/OK to apply the settings and
return to the previous screen.
Navigate Down to Auto Dim.
2
Turning the Automatic start and finish On
and Off
• Press the Mode button to access the
Main Menu.
1
• Navigate Up to Setup and press the
Play/OK button.
• Navigate Right to select Time period.
• Navigate Up or Down to select either
Auto Dim Start or Auto Dim End.
• Navigate Right or Press Play/OK.
3
Navigate Down to Auto Dim
2
23
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
• Navigate Right to select AutoDim Timer. 6.10 Check the Status of your
3
• Navigate Up or Down to select either
On or Off.
Photoframe
• Press Play/OK to apply the settings.
You may check the status of your PhotoFrame-
how many more photos can be stored, which
media are currently connected, and the
PhotoFrame software version.
• Press the Mode button to access the
1
Main Menu.
• Navigate Down to highlight
and
Setup
press Play/OK.
Press the Mode button to leave this menu
and play the slideshow.
Press the Play/OK to go to Slideshow,
Browse or Clock mode.
Note 1:
Digital PhotoFrame will automatically turn off its
display exactly at the Auto-Dim-Start time; if
the time has already passed it will go into Auto-
Dim-End status at the next set time.
• Navigate Down to go to
• The status of the PhotoFrame is shown in
the right window.
.
2
Status
• If you have a memory card in the
PhotoFrame it will give you the status of
the card (card type and free memory left).
Note 2:
If you want to turn ON the PhotoFrame during
an auto OFF period, just press any key, the
PhotoFrame will wake up until the next auto
OFF period.
Firmware: (PhotoFrame software version)
Connected media: (Lists all memory cards
connected to PhotoFrame)
Connected media free space: (remaining
free memory in MB)
Settings
24
Download from Www.Somanuals.com. All Manuals Search And Download.
6.12
Beep On/Off
6.11
Rotate Function (AutoTilt)
Turning the button sounds ON or OFF
With this function your photos will
automatically be properly positioned no matter
whether you have the PhotoFrame positioned
horizontally or vertically.
• Press the Mode button to access the
1
Main Menu.
• Navigate Down to highlight Setup and
press Play/OK.
• Press the Mode button to access the
Main Menu.
1
• Navigate Down to highlight Setup and
press Play/OK.
• Navigate Down to go to Beep.
• Navigate Right to go to On or Off.
• Navigate Down and press Play/OK to
confirm the selection.
2
• Navigate Down to go to Auto tilt.
• Navigate Right to go to On or Off.
• Press Play/OK to confirm selection.
2
Press the Mode button to leave this menu
and play the slideshow.
Press the Mode button to leave this menu
and play the slideshow.
Settings
25
Download from Www.Somanuals.com. All Manuals Search And Download.
6.13
Key Help
When the PhotoFrame first starts a description
of the control buttons is displayed for 15
seconds or until the press of any of the buttons.
If you would like to turn this function off follow
the instructions below.
• Press the Mode button to access the
Main Menu.
1
• Navigate Down to highlight Setup and
press Play/OK.
• Navigate Down to go to Key Help.
• Navigate Right to go to On or Off.
• Navigate Down and press Play/OK to
confirm the selection.
2
Press the Mode button to leave this menu
and play the slideshow.
Settings
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
Technicaldata
,
w
• Playback mode: Full screen browse, Slidesho
Thumbnail browse
• Album management: Create, Delete, Edit,
Rename
Picture Display
• Effective viewing area: 162 x 121.5 mm
• Resolution: 800 x 3(RGB) x 600 pixels
• Viewing angle:
°
CR>&=10 130 RL,110 UD
°
• Photo edit: Copy, Delete, Rotate, Zoom and
Crop, Move
• Lifetime, to 50% brightness: 20,000hr
• Brightness: 250 cd/m (typical)
2
• Photo effects: Frames, Sepia
• Slideshow setting: Collage, Random,
Sequential,Transition effects
• Aspect ratio: 4:3
• Panel resolution: 800x600
• Pixel density: 0.0675(W) x 0.2025(H)
mm
• Screen background color: Black,White, Gray
• Clock function: Set time and date, Clock and
Alarm,Auto dim on weekday/weekend
• Setup function: Brightness adjustment,
Language, Status,Auto on/off, Beep
on/off, Set time and date, Clock display enable/
disable, Factory setting and Photo source
• System status: Firmware version, Power
source, Free memory
• Connected media status: Connected media,
Free memory
• OSD Languages: English, French, German,
Italian, Japanese, Russian, Simplified Chinese,
Spanish, Dutch, Danish
Storage Media
• Memory CardTypes:
SD/MMC/MMC+/xD/MS/CF type I
Dimensions
• Set dimensions with stand (W x H x D): 244.6
x 167.4 x 121.1 mm
• Weight: 0.633kg(with stand)
• Temperature range (operation):
0 °C to 40 °C/32°F to104°F
• Temperature range (storage):
-20 °C to 70 °C/-4°F to 158°F
Power
• Plug & Play Compatibility:Windows XP and
Vista and Mac OS X
• Power consumption: 6.3W
• Regulatory Approvals:FCC,UL,
• Other convenience: Kensington lock
compatible
• Photo format supported: JPEG photo (in DCF
structure), Up to 16 Megapixels
• Placement supported: Landscape, Portrait,
Photo auto orientation
• Buttons and controls: 6 control key buttons.
1 playback key to play in Slideshow mode,
in Browse mode or in Clock mode. 1 key
each to go Up, Down, Right, or Left . 1 Hotkey
to toggle to Slideshow mode,Thumbnail
mode, or Main menu. 1 Menu key to go to
edit menu/, setup menu, or to exit.
27
Technicaldata
Download from Www.Somanuals.com. All Manuals Search And Download.
in JPEG format according to camera industry
standards. Digital PhotoFrame is designed
to show photos following the same industry
standards. Some images, such as web images,
scanned images, or photos in RAW format from
professional cameras, are not stored according
to camera industry standards and therefore
cannot be correctly displayed on Digital
ꢀ.
Frequently asked
questions
Is the LCD screen touch-enabled?
The LCD screen is not touch-enabled. Use
the buttons on the back to control Digital
PhotoFrame.
PhotoFrame. Use PC applications to convert
such images into standard JPEG format for
Can I switch between different slideshows Digital PhotoFrame.
photos by using different memory cards?
Yes.When a memory card is connected to the
Why doesn’t my Digital PhotoFrame go
Digital PhotoFrame, it’ll slideshow photos stored into Auto-off status after I set it?
on that specific card.
First, make sure you set Current Time,Auto-off
at, and Auto-on at correctly. Digital PhotoFrame
Will the LCD screen be damaged if I keep will automatically turn off its display exactly at
showing the same photo for a long time?
No. Digital PhotoFrame can display the same
photo continuously for 72 hours without any
damage to the LCD screen.
the Auto-off time. If the time has already passed
for the day, it will start entering Auto-off status
at the specified time from the next day.
I’m trying to upload pictures from my
PC to a memory card, which I’m then
inserting into the DPF. However, the DPF
doesn’t show the photos.What can I do?
Load all the photos you want to upload to DPD
in the root directory of your memory card.
Power off your DPD, insert the memory card,
and then restart DPF.After a few seconds, all
photos in the root directory of the memory
card will be automatically added to PhotoFrame.
The root directory on memory card will NOT
be emptied after this operation. Note that this
operation does not apply to photos in sub-
directories.
Can I use Digital PhotoFrame to delete
photos on memory card?
Yes, it supports operations to delete photos on
external devices such as a memory cards.
Can I print photos from Digital
PhotoFrame?
No, it does not support direct photo printing.
How does the Digital PhotoFrame show
high-resolution 4:3 digital photos on its
3:2 screen?
To ensure high picture integrity, Digital
PhotoFrame shrinks the photos at original
aspect ratio and trims excessive portions before Do Philips PhotoFrame support
displaying these photos.
progressive JPEG?
PhotoFrame supports progressive JPEG
Can I use Digital PhotoFrame during its
Auto-off periods?
formatted picture, but the slideshow display
.
might be very slow
Yes. Press any control button to bring the
system back to ON status.
Why doesn’t my Digital PhotoFrame show
some of my photos?
Digital cameras take photos and store them
Frequently Asked Questions
28
Download from Www.Somanuals.com. All Manuals Search And Download.
There is currently a system of recycling up and
running in the European countries, such asThe
Netherlands, Belgium, Norway, Sweden and
Denmark.
9.
Serviceand Warranty
One Year Limited Warranty (for US and
Canada only)
In U.S.A., Philips Consumer Electronics
North America has contributed funds for the
Electronic Industries Alliance (EIA) Electronics
Recycling Project and state recycling initiatives
for end-of-life electronics products from
household sources. In addition, the Northeast
Recycling Council (NERC) - a multi-state
non-profit organization focused on promoting
recycling market development - plans to
implement a recycling program.
Philips warrants that this product shall be free
from defects in material, workmanship and
assembly, under normal use, in accordance with
the specifications and warnings, for a period
of one year from the date of purchase.This
warranty extends only to the original purchaser
of the product, and is not transferable.To
exercise your rights under this warranty, you
must provide proof of purchase in the form of
an original sales receipt that shows the product
name and the date of purchase. For customer
support or to obtain warranty service, please
Contact Philips Customer Care Center at:
1-888-PHILIPS (1-888-744-5477) IN U.S.A.,
Puerto Rico, or U.S. virgin islands. 1-800-661-
6162 (French speaking), 1-888-PHILIPS (1-
888-744-5477) (English or Spanish speaking) in
Canada.THERE ARE NO OTHER EXPRESS OR
IMPLIEDWARRANTIES. Philips liability is limited
to repair or, at its sole option, replacement of
the product. Incidental, special and consequential
damages are disclaimed where permitted by law.
This warranty gives you specific legal rights.You
may also have other rights that vary from state
to state.
Visit
Banned Substance Declaration
This product comply with RoHs and Philips BSD
(AR17-G04-5010-010) requirements
Recycling Information for Customers
Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization’s product,
service and activities.
From the planning, design and production
stages, Philips emphasizes the important of
making products that can easily be recycled.At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors.
29
Serviceand Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
Federal Communications Commission
(FCC) Notice (U.S.Only)
THIS CLASS B DIGITAL APPARATUS MEETS
ALL REQUIREMENTS OFTHE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
FCC Declaration of Conformity
Model Number: 8FF2FPW 8FF2FPB
Trade Name:
Philips
Responsible Party: Philips Accessories and
Computer Peripherals
1881 Route 46 West
Ledgewood, NJ 07852
Declaration of Conformity for Products
Marked with FCC Logo, United States
Only
“PHILIPS”
8FF2FPW 8FF2FPB
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
DPF technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Caution:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Connections to this device must be made with
shielded cables with metallic RFI/EMI connector
hoods to maintain compliance with FCC Rules
and Regulations.
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
rain or excessive moisture.
Serviceand Warranty
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Commission Federale de la
Communication (FCC Declaration)
CET APPAREIL NUMERIQUE DE LA CLASSE
B RESPECTETOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR
DU CANADA.
Note:
Cet équipement a été testé et déclaré conforme
auxlimites des appareils numériques de class
B,aux termes de l’article 15 Des règles de
la FCC. Ces limites sont conçues de façon à
fourir une protection raisonnable contre les
interférences nuisibles dans le cadre d’une
installation résidentielle. CET appareil produit,
utilise et peut émettre des hyperfréquences
qui, si l’appareil n’est pas installé et utilisé selon
les consignes données, peuvent causer des
interférences nuisibles aux communications
radio. Cependant, rien ne peut garantir l’absence
d’interférences dans le cadre d’une installation
particulière. Si cet appareil est la cause
d’interférences nuisibles pour la réception des
signaux de radio ou de télévision, ce qui peut
être décelé en fermant l’équipement, puis en
le remettant en fonction, l’utilisateur pourrait
essayer de corriger la situation en prenant les
mesures suivantes:
End-of-Life Disposal
• Your new product contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.
• Please find out about the local regulations on
how to dispose of your old monitor from
your local Philips dealer.
• (For customers in Canada and U.S.A.)
Dispose of in accordance to local-state and
federal regulations.
For additional information on recycling contact
End of life directives-Recycling
Your new DPF contains several materials that
can be recycled for new uses.
• Réorienter ou déplacer l’antenne de
réception.
• Augmenter la distance entre l’équipement et
le récepteur.
Votre nouveau téléviseur contient plusieurs
matériaux qui peuvent être recyclés pour de
nouvelles utilisations.
• Brancher l’équipement sur un autre circuit
que celui utilisé par le récepteur.
• Demander l’aide du marchand ou d’un
technicien chevronné en radio/télévision.
Comme tous les produits ACL, cette appareille
contenant une petit quantité de mercure, SVP
se débarrasser en accord avac les lois fédéral et
gouvernemental.
Caution:
Toutes modifications n’ayant pas reçu
l’approbation des services compétents
en matière de conformité est susceptible
d’interdire à l’utilisateur l’usage du présent
équipement.
Les raccordements à cet appareil doivent être
réalisés avec des câbles blindés à protections
métalliques pour les connecteurs RFI/EMI afin de
maintenir la conformité avec les Règlements et
la Législation du FCC.
31
Serviceand Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
8
©200 Koninklijke Philips N.V.
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|