Philips DVD Recorder DVDR612 User Manual

DVD Recorder  
DVDR610  
DVDR615  
DVDR616  
User manual  
Visit us at www.p4c.philips.com for service support  
Make your own DVD  
1
3139 246 13454  
1DVDR6xx_Eng00_13454c  
1
9/28/04, 1:24 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3139 246 15111  
Connecting DVD Recorder +TV + Cable Box +VCR or DVD player  
First, connect your DVD recorder to yourTV set and Cable Box or antenna.  
1
OUT  
IN  
Antenna Cable Box  
S-VIDEO  
VIDEO  
TV (back panel)  
ANTENNA ANTENNA  
OUT  
IN  
L
L
AUDIO  
OUT  
IN  
S-VIDEO  
VIDEO  
SCART IN  
AUDIO  
R
R
OR  
Antenna or CableTV signal  
(you may need to remove the  
antenna from yourTV orVCR  
and connect to here)  
VIDEO  
(CVBS)  
ANTENNA  
S-VIDEO  
(Y/C)  
EXT2  
EXT1  
AUX - I/O  
MAINS  
AUDIO  
TV  
COAXIAL  
DIGITAL AUDIO OUT  
TO TV - I/O  
AUDIO /VIDEO OUT  
DVD Recorder (back panel)  
Then, select one of the options below to connect yourVCR or DVD player.  
2
If yourVCR or DVD player has SCART connector :  
a
TV (back panel)  
IN  
OUT  
S-VIDEO  
VIDEO  
L
L
Enables manual recording fromTV toVCR.  
AUDIO  
R
R
Connection as  
1
per diagram  
Enables recording fromVCR or  
DVD player to DVD recorder and  
viewing ofVCR or DVD playback.  
L
R
VIDEO AUDIO  
EXT2  
AUX - I/O  
SCART OUT / TO TV  
IN  
IN  
DVD Recorder (back panel)  
VCR or DVD player (back panel)  
If yourVCR or DVD player does not have SCART connector :  
TV (back panel)  
IN  
b
OUT  
S-VIDEO  
VIDEO  
AUDIO  
L
L
Enables manual recording fromTV toVCR.  
R
R
Enables recording fromVCR or DVD player to DVD recorder.  
Connection as  
1
per diagram  
VIDEO  
IN  
VIDEO  
OUT  
S-VIDEO  
OUT  
L
R
L
R
L
R
AUDIO  
OUT  
AUDIO  
OUT  
AUDIO  
IN  
DVD Recorder (front panel)  
Enables viewing ofVCR or DVD playback.  
VCR or DVD player (back panel)  
HELPFUL HINT:  
The connections betweenVCR andTV shown on the above diagrams are for reference only.  
Refer to the table below for others possible connections if the same sockets are available on both sets of devices.  
VCR  
SCART OUT  
TV  
Playback  
SCART IN  
S-VIDEO OUT and AUDIO OUT  
VIDEO OUT and AUDIO OUT  
S-VIDEO IN and AUDIO IN  
VIDEO IN and AUDIO IN  
WARNING!  
Recording fromVCR or DVD player to DVD Recorder  
may not be possible due to copy protection.  
Recording  
SCART IN  
SCART OUT  
S-VIDEO IN and AUDIO IN  
VIDEO IN and AUDIO IN  
S-VIDEO OUT and AUDIO OUT  
VIDEO OUT and AUDIO OUT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued ...  
If you wish to connect your cable boxTV signal to yourVCR, follow the connections  
below.  
VCR (back panel)  
ANTENNA  
IN  
2b  
Connection as per diagram  
TV (back panel)  
IN  
OUT  
S-VIDEO  
VIDEO  
L
L
CableTV  
signal  
AUDIO  
R
R
Connection as per  
diagram  
Enables recording from Cable Box  
to DVD recorder and viewing of  
programmes from Cable Box.  
1
ANTENNA ANTENNA  
SCART OUT / TO TV  
IN  
OUT  
AUX - I/O  
DVD Recorder (back panel)  
Cable Box  
HELPFUL HINT:  
To record from Cable Box's channel to your DVD recorder,  
you have to select the channel from the Cable Box directly.  
In this case, ShowView/Video Plus+ programme recording is not possible.  
If you wish to connect an amplifier/receiver :  
TV (back panel)  
IN  
OUT  
S-VIDEO  
VIDEO  
L
L
AUDIO  
R
R
Connection as per  
1
diagram  
AUDIO  
IN  
Amplifier/Receiver  
DVD Recorder (back panel)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LASER  
CAUTION  
Type  
Semiconductor laser  
InGaAlP (DVD)  
AIGaAs (CD)  
VISIBLE AND INVISIBLE LASER  
RADIATIONWHEN OPEN AVOID  
EXPOSURETO BEAM  
Wave length  
658 nm (DVD)  
790 nm (CD)  
ADVARSEL  
Output Power  
30 mW (DVD+RW write)  
1.0 mW (DVD read)  
1.0 mW (CD read)  
84 degrees (DVD)  
61 degrees (CD)  
SYNLIG OG USYNLIG  
LASERSTRÅLINGVED ÅBNING  
UNDGÅ UDSÆTTELSE FOR STRÅLING  
VARNING  
SYNLIG OCH OSYNLIG  
LASERSTRÅLNING NÄR DENNA DEL  
ÄR ÖPPNAD BETRAKTA EJ STRÅLEN  
VARO!  
AVATTAESSA OLET ALTTIINA  
NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE  
LASER SÄTEILYLLE. ÄLÄ KATSO  
SÄTEESEEN  
Beam divergence  
This product complies with the radio  
interference requirements of the  
European Community.  
Manufactured under  
license from Dolby  
Laboratories.“Dolby”  
VORSICHT  
and the double-D symbol are  
trademarks of Dolby Laboratories.  
SICHTBARE UND UNSICHTBARE  
LASERSTRAHLUNGWENN  
ABDECKUNG GEÖFFNET NICHT DEM  
STRAHL AUSSETSEN  
ATTENTION  
RAYONNEMENT LASERVISIBLE ET  
INVISIBLE EN CAS D’OUVERTURE  
EXPOSITION DANGEREUSE AU  
FAISCEAU  
This product complies with  
the requirements of the  
following directives and  
guidelines: 73/23/EEC +  
89/336/EEC + 93/68/EEC  
3
3139 246 13454  
1DVDR6xx_Eng00_13454c  
3
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
4
3139 246 13454  
1DVDR6xx_Eng00_13454c  
4
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Functions  
Your PHILIPS DVD recorder has a number of special functions that will make day-to-day  
use of your new DVD recorder easier for you.  
Using theDigital Photo  
This connection is also known  
as 'FireWire' and 'IEEE 1394.'  
This connection is used for the  
transfer of high bandwidth  
digital signals as used by digital  
video (DV) camcorders. Audio  
and video signals are  
Manager’, you can view and  
modify JPEG pictures from a  
Picture CD, DVD, or a CD ROM.  
You can create slide shows and  
play them on a DVD player (for  
DVDR615 and DVDR616 only).  
transmitted using an i-Link  
cable. In addition to DV and  
Hi8 camcorders, some personal  
computers with digital video  
output can also be connected  
to this digital input (for  
This function automatically  
transfers all the television  
channel settings onto your DVD  
recorder via the scart cable  
(EXT1TOTV-I/O socket).  
DVDR615 and DVDR616 only).  
At the touch of a button, your  
DVD recorder will check which  
channel is currently playing on  
your television set and record it  
even if it is in Standby mode.  
This product incorporates  
copyright protection technology  
that is protected by method  
claims of certain US patents and  
other intellectual property  
rights owned by Macrovision  
Corporation and other rights  
owners. Use of this copyright  
protection technology must be  
authorized by Macrovision  
Corporation, and is intended  
for home and other limited  
viewing uses only unless  
otherwise authorized by  
Macrovision Corporation.  
Reverse engineering or  
disassembly is prohibited.  
This is a simple programming  
system for DVD recorders.To  
use it, enter the programming  
number associated with your  
television programme.You can  
find this number in your  
favourite listings magazine.  
SHOWVIEW is a registered  
trademark of Gemstar  
Development Corporation.  
SHOWVIEW is manufactured  
under license from Gemstar  
Development Corporation.  
5
3139 246 13454  
1DVDR6xx_Eng00_13454c  
5
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Special Functions ................................... 5  
Care and Safety Information  
Installing the DVD Recorder  
First Installation ................................... 21-22  
TV channel programming ........................ 23  
AutomaticTV channel search .................... 23  
SortingTV channels according to  
TV sequence .......................................... 23-24  
Sorting theTV channels .............................. 24  
Setting favouriteTV channels ..................... 25  
ManualTV channel search .................... 25-26  
Allocating a decoder .................................... 26  
Fine tuning theTV channels ....................... 27  
Setting the time and date ........................ 27  
Setup .............................................................. 8  
Cleaning discs............................................... 8  
About recycling ........................................... 8  
General Information  
Introduction ................................................. 9  
Accessories supplied .................................. 9  
Region codes................................................ 9  
Setting the language .................................. 28  
Connecting toTV  
Playback  
General........................................................ 10  
Selecting a suitable connection  
Playable discs .............................................. 29  
Inserting a disc ........................................... 29  
Starting disc playback ............................... 30  
Playing a DVD video disc ............................ 30  
Playing a (Super)Video CDs....................... 30  
Playing an udio CDs ..................................... 30  
Playing a DVD+R(W)................................... 31  
Playing an MP3 CD ....................................... 31  
Playing a picture disc (slide show) ............ 31  
Supported JPEG picture formats .............. 31  
to yourTV ................................................... 10  
Setting theTV to the correct video in  
channel ......................................................... 10  
Option 1 : Using SCART socket ............ 11  
Option 2 : Using S-Video (Y/C) socket 12  
Option 3 : UsingVideo (CVBS) socket. 13  
Connecting to Additional  
Devices  
Additional Playback Features  
Using second SCART socket  
(EXT2-AUX-I/O) ...................................... 14  
Connecting a Cable Box/Decoder ........... 14  
Connecting aVCR/DVD player ................. 14  
Connecting a camcorder to the  
front sockets .............................................. 15  
Option 1: Using DV In socket .................... 15  
Option 2: Using S-VIDEO In or  
UsingToobal options ................................ 32  
Changing subtitle language ......................... 32  
Changing audio soundtrack language ....... 33  
Switching camera angles.............................. 33  
Zooming in ..................................................... 33  
Time search ................................................... 33  
Changing to another title/chapter/track34  
VIDEO In socket ......................................... 15  
Using analogue audio output sockets... 16  
Using digital audio output socket .......... 16  
Searching forwards/backwards............... 34  
Pausing playback / slow motion play ..... 34  
Selecting various play mode.................... 35  
Repeat play ..................................................... 35  
Repeating a specific segment (A-B) .......... 35  
Shuffle play...................................................... 35  
Scan disc ......................................................... 35  
Front Panel................................................. 17  
Sockets behind the flap ............................... 17  
Remote Control ............................. 18-19  
Inserting batteries ..................................... 20  
Using the remote control to  
operate the system .................................... 20  
Using the alphanumeric keypad to  
enter the characters.................................. 20  
6
3139 246 13454  
1DVDR6xx_Eng00_13454c  
6
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Recording  
Using the Browser  
Discs for recording ................................... 36  
Browsing the disc ...................................... 50  
Colour coded buttons functions .............. 50  
Browsing the picture disc........................ 51  
Adding pictures to an album ...................... 51  
Changing the picture order within  
an album ....................................................... 52  
Deleting an album......................................... 52  
Deleting picture in an album ...................... 52  
Changing the slide show settings .............. 53  
Protecting the recorded title  
Recording settings..................................... 36  
Recording mode ........................................... 37  
Recording language ...................................... 37  
Inserting chapter markers .......................... 37  
Direct record function ................................ 38  
Filter mode..................................................... 38  
Manual recording................................. 38-39  
Manual recording with automatic  
turn-off (one touch recording) .............. 39  
Direct recording........................................ 40  
Deleting a recording................................. 40  
(DVD+RW) ................................................ 53  
System Menu - Preferences  
Accessing to the Preferences options .. 54  
Recording ....................................................... 54  
Sound .............................................................. 54  
Disc .................................................................. 55  
Access ............................................................. 55  
Features .......................................................... 55  
Timer Recording  
Introduction ............................................... 41  
Programming recordings ................... 41-42  
Programming recording from a  
Cable Box ....................................................... 42  
Programming recordings with  
ShowView® System ................................... 43  
Changing a programmed recording ...... 44  
Deleting a programmed recording........ 44  
System Menu - Setup  
Accessing to the Setup options ............. 56  
System ....................................................... 56-57  
Time-date ....................................................... 57  
Analogue channels ........................................ 57  
Video output............................................ 57-58  
Audio output ................................................. 58  
Language ......................................................... 58  
Editing/Finalising Recording  
About editing ............................................. 45  
Colour coded buttons functions .............. 45  
Index Picture screen .................................... 45  
Changing the disc/title name .................. 46  
Setting Access Control  
Making the editing compatible  
About Access Control ............................. 59  
Setting or changing the pin code ........... 59  
Activating/Deactivating the child lock .. 59  
Authorising discs .......................................... 60  
(DVD+RW) ................................................ 46  
Finalising disc (DVD+R) ........................... 46  
Video editing .............................................. 47  
Hiding unwanted chapter ........................... 47  
Editing chapter (merge/split/hide)............. 48  
Editing title (divide/append/  
index picture) ........................................ 48-49  
Deleting chapter markers ........................... 49  
Photo editing .............................................. 49  
Troubleshooting ............................. 61-65  
Display panel symbols/  
messages................................................ 66-67  
Specifications ........................................... 68  
Glossary.........................................................69  
TV System Guide.......................... 70-71  
7
3139 246 13454  
1DVDR6xx_Eng00_13454c  
7
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Safety Information  
CAUTION!  
Cleaning discs  
High voltage! Do not open.  
You run the risk of getting an  
electric shock.  
Some problems occur because the disc  
inside the recorder is dirty (frozen  
picture, sound disruptions, picture  
distortions). To avoid these problems,  
discs should be cleaned on a regular  
basis.  
The machine does not contain any  
user-serviceable parts. Please leave  
all maintenance work to qualified  
personnel.  
To clean a disc, use a micro fibre cleaning  
cloth and wipe the disc from the center  
to the edge in a straight line.  
Setup  
CAUTION!  
Finding a suitable location  
Do not use solvents such as benzene,  
thinner, commercially available cleaners,  
or anti-static sprays intended for discs.  
– Place the set on a flat, hard and stable  
surface. Do not place the set on a carpet.  
– Do not position the set on top of  
other equipment that might heat it up  
(e.g., receiver or amplifier).  
Since the optical unit (laser) of the DVD  
recorder operates at a higher power than  
regular DVD or CD players, cleaning CDs  
intended for DVD or CD players may  
damage the optical unit (laser).Therefore,  
refrain from using a cleaning CD.  
– Do not put anything under the set  
(e.g., CDs, magazines).  
Space for ventilation  
– Place the apparatus in a location with  
adequate ventilation to prevent internal  
heat build up. Allow at least 10 cm (4.5”)  
clearance from the rear and the top of  
the set and 5cm (2.3”) from the left and  
right to prevent overheating.  
About recycling  
These operating instructions have been  
printed on non-polluting paper. This  
electronic equipment contains a large  
number of materials that can be recycled.  
If you are disposing of an old machine,  
please take it to a recycling centre.  
Please observe the local regulations  
regarding disposal of packaging materials,  
exhausted batteries, and old equipment.  
5cm (2.3")  
10cm (4.5")  
5cm (2.3")  
10cm (4.5")  
Avoid high temperatures, moisture,  
water and dust  
– Apparatus shall not be exposed to  
dripping or splashing.  
– Do not place any sources of danger on  
the apparatus (e.g., liquid filled objects,  
lighted candles).  
8
3139 246 13454  
1DVDR6xx_Eng00_13454c  
8
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
Introduction  
Accessories supplied  
Your Philips DVD recorder allows you to  
record theTV programmes or duplicate  
camcorder recordings to a DVD+RW or  
DVD+R and play pre-recorded DVDs.  
The recordings you make on the  
– Remote control and batteries  
– Scart cable  
– Antenna cable  
– Quick Use Guide  
Recorder will play on some DVD players  
and DVD-ROM drives. The DVD+R discs  
have to be finalised before they can be  
played on other DVD players.  
Region codes  
DVD films are usually not released at the  
same time in all regions of the world, thus  
all DVD players/recorders are keyed to a  
specific region code.  
Please take the time to read this user  
manual before using your DVD recorder.  
It contains important information and  
notes regarding operation.  
This device will only play  
ALL  
Region 2 DVDs or DVDs  
manufactured to be played in all  
regions ('ALL'). DVDs from other  
regions cannot be played on this  
DVD recorder.  
Helpful Hints:  
– If you have questions or if problems come  
up during operation, please see the chapter  
'Troubleshooting'.  
2
– If you need further assistance, please call  
the customer support service for your  
country. The corresponding telephone  
numbers and e-mail addresses are given in  
the guarantee booklet.  
9
3139 246 13454  
1DVDR6xx_Eng00_13454c  
9
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting toTV  
General  
Setting theTV to the correct video  
in channel  
The necessary cable connections must be  
made before you can record or playback  
TV programmes using your DVD  
recorder.  
1 Press STANDBY-ON 2 on the DVD  
recorder to turn it on.  
2 Turn on theTV and set it to the correct  
video-in channel. You should see the blue  
DVD background screen or the first  
installation screen on theTV.  
Selecting a suitable connection to  
yourTV  
When you install your DVD recorder for  
the first time, select one of the following  
options to connect the DVD recorder  
and yourTV.  
Usually this channel is between the  
lowest and highest channels and may be  
called FRONT,A/V IN,VIDEO. See your  
TV’s manual for more details.  
Or, you may go to channel 1 on your  
TV, then press the Channel down button  
repeatedly until you see theVideo In  
channel.  
Or, theTV remote control may have a  
button or switch that chooses different  
video modes.  
G Option 1: Using Scart socket  
Select this if yourTV is equipped with a  
scart socket. It provides the best picture  
quality (see pages 11).  
G Option 2: Using S-Video (Y/C)  
socket  
Select this if yourTV is equipped with a  
S-Video (SVHS) socket. It provides  
excellent picture quality (see page 12).  
IMPORTANT!  
When you complete the  
G Option 3: UsingVideo (CVBS)  
socket  
connections and turn on the DVD  
recorder for the first time, you must  
complete the First Installation. This  
set upTV channels, menu languages  
and other features (see pages 21-  
22).  
Select this if yourTV is equipped with a  
Video (CVBS) socket. It provides good  
picture quality (see page 13).  
10  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
10  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting toTV (contd)  
Option 1: Using SCART  
socket  
TV  
Antenna or  
Satellite/CableTV signal  
S
-
V
I
D
E
O
AU  
O
D
U
I
O
I
N
T
V
I
D
E
O
I
N
SCART  
I
N
2
1
3
4
The scart or Euro AV cable serves as the  
universal connector for picture, sound  
and control signals. With this type of  
connection, there is practically no loss of  
quality in picture or sound transmission.  
5 Press STANDBY-ON 2 on the DVD  
recorder to turn it on.  
The message 'IS THE TV ON?'  
appears on the display panel.  
6 Turn on theTV power.  
Have the following cables ready:  
1) Antenna cable  
2) SCART cable  
If the connection has properly made,  
yourTV will automatically turn on to the  
Video Input channel for the SCART  
socket and you should see the  
1 Turn off yourTV and remove the antenna  
cable from yourTV (or Satellite Receiver/  
Cable Box). Insert it into the  
{ Language and Country } menu  
appears on theTV.  
If not, select the correctVideo In  
channel at theTV manually until you see  
the { Language and Country } menu.  
ANTENNA IN socket at the back of  
the DVD recorder.  
7 Proceed to page 21 to continue the first  
2 Use the supplied antenna cable to  
connect the DVD recorder’s TV OUT  
socket to the antenna input socket at the  
back of yourTV set.  
installation.  
Helpful Hints:  
– If yourTV set has several SCART sockets,  
select the SCART socket that is suitable for  
both video output and video input.  
– If yourTV set displays a selection menu for  
the SCART socket, select 'VCR' as the source  
for the SCART socket.  
3 Use a SCART cable to connect the DVD  
recorder’s EXT 1 (TOTV-I/O) socket  
to the SCART socket at the back of your  
TV set.  
4 Connect the power cable from the DVD  
recorder’s ~ MAINS to the power  
supply.  
– The EXT 2 AUX-I/O socket is intended  
only for additional devices.  
11  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
11  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting toTV (contd)  
Option 2: Using S-Video  
(Y/C) socket  
TV  
Antenna or  
Satellite/CableTV signal  
S
-
V
I
D
E
O
AU  
O
D
U
I
O
I
N
T
V
I
D
E
O
I
N
SCART  
I
N
1
2
3
4
5
This connecting cable, also known as the  
SVHS cable, is used to transmit the  
brightness signal (Y signal) and colour  
signal (C signal) separately. This mini DIN  
socket is also called a Hosiden jack.  
4 Use an audio cable (red/white) to  
connect the DVD recorders  
AUDIO L/R OUT socket to the audio  
input socket at the back of yourTV set  
(or labelled as AV In or Audio In).  
Have the following cables ready:  
1) Antenna cable  
2) S-Video (SVHS) cable (not supplied)  
3) Audio cables (red/white, not supplied)  
5 Connect the power cable from the DVD  
recorders ~ MAINS to the power  
supply.  
6 Press STANDBY-ON 2 on the DVD  
recorder to turn it on.  
1 Turn off yourTV and remove the antenna  
cable from yourTV (or Satellite Receiver/  
Cable Box). Insert it into the  
The message 'IS THE TV ON?'  
appears on the display panel.  
ANTENNA IN socket at the back of  
the DVD recorder.  
7 Turn on theTV power. Select the correct  
Video In channel at theTV (see page 10).  
The first installation menu  
2 Use the supplied antenna cable to  
connect the DVD recorders TV OUT  
socket to the antenna input socket at the  
back of yourTV set  
{ Language and Country } will appear  
on theTV.  
8 Proceed to page 21 to continue the first  
installation.  
3 Use an S-Video (SVHS) cable to connect  
the DVD recorders S-VIDEO (Y/C)  
OUT socket to the S-Video In socket at  
the back of yourTV set (or labelled as  
S-Video In or SVHS).  
12  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
12  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting toTV (contd)  
Option 3 : Using Video  
(CVBS) socket  
TV  
Antenna or  
Satellite/CableTV signal  
S
-
V
I
D
E
O
AU  
O
D
U
I
O
I
N
T
V
I
D
E
O
I
N
SCART  
I
N
2
1
4
3
5
This cable, usually featuring yellow cinch  
plugs, is used for transmitting the  
CompositeVideo signal (FBAS, CVBS). In  
this method of transmission, the colour  
signal and the brightness signal are  
transmitted on the same cable.  
4 Use an audio cable (red/white) to  
connect the DVD recorders  
AUDIO L/R OUT socket to the audio  
input socket at the back of yourTV set  
(or labelled as AV In or Audio In).  
5 Connect the power cable from the DVD  
recorders ~ MAINS to the power  
supply.  
Have the following cables ready:  
1) Antenna cable  
2) Video (CVBS) cable (yellow, not supplied)  
3) Audio cables (red/white, not supplied)  
6 Press STANDBY-ON 2 on the DVD  
recorder to turn it on.  
The message 'IS THE TV ON?'  
appears on the display panel.  
1 Turn off yourTV and remove the antenna  
cable from yourTV (or Satellite Receiver/  
Cable Box). Insert it into the  
7 Turn on theTV power. Select the correct  
Video In channel at theTV (see page 10).  
The first installation menu  
ANTENNA IN socket at the back of  
the DVD recorder.  
{ Language and Country } will appear  
on theTV.  
2 Use the supplied antenna cable to  
connect the DVD recorders TV OUT  
socket to the antenna input socket at the  
back of yourTV set.  
8 Proceed to page 21 to continue the first  
installation.  
3 Use a video (CVBS) cable to connect the  
DVD recorders VIDEO (CVBS) OUT  
socket to theVideo In socket at the back  
of yourTV set (or labelled asVideo In,AV  
In or Composite).  
13  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
13  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to Additional Devices  
Using second SCART socket  
(EXT2-AUX-I/O)  
Connecting a Cable Box/Decorder  
If your Cable Box/Decorder has a scart  
socket, you can choose to connect it to  
the second scart socket.  
Cable Box/Decoder/  
VCD/DVD player  
1 Use a scart cable to connected the  
Cable Box/Decoder scart socket (usually  
labelled as TVor TO TV) to  
EXT 2 AUX-I/O socket at the back of  
the DVD recorder.  
2 Select theTV channels to be received by  
the Cable Box directly on the receiver  
itself.  
Connecting aVCR/DVD player  
You can connect a video cassette  
recorder (VCR), DVD player, decoder,  
satellite receiver or cable box to  
EXT 2 AUX-I/O socket at the back of  
the DVD recorder.  
You will need this connection if you want  
to record the video tapes or discs to a  
DVD+R(W)s.  
G Use a scart cable to connect the scart  
socket (usually labelled as SCART OUT’  
or TO TV) of theVCD/DVD player to  
EXT 2 AUX-I/O socket.  
When playback is started on this  
additional device, the DVD recorder will  
automatically send the video/audio signals  
from EXT 2 AUX-I/O socket to  
EXT 1TOTV-I/O socket. You will then  
see the picture from the additional device  
on yourTV, even if the DVD recorder is  
turned off (only if you have connected  
yourTV via EXT 1TOTV-I/O socket,  
see page 11).  
G Alternatively, you can choose to connect  
via the front sockets of the DVD  
recorder if yourVCR/DVD player have  
the same output sockets.  
Before start operating, select CAM1as  
the input channel. For recording, see  
pages 38~39.  
1) Connect to S-VIDEO input socket  
and AUDIO L/R input sockets.  
To switch between playback from  
the additional devices and playback  
from the DVD recorder  
OR  
G Press TV/DVD on the remote control.  
2) Connect to VIDEO input socket and  
AUDIO L/R input sockets.  
Helpful Hint:  
– Most prerecorded video cassettes and  
DVDs are copy-protected. If you try to copy  
them, the message 'COPY PRO' appears on  
the display panel.  
14  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
14  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Additional Devices (contd)  
Connecting a camcorder to  
the front sockets  
S-VIDEO OUT VIDEO OUT AUDIO OUT  
DV OUT  
L
2
R
1
OR  
CH-  
CH+  
CH-  
CH+  
You can use the front sockets to copy  
camcorder recordings. These sockets are  
located behind the flap on the right hand  
side.  
Option 2: Using S-VIDEO In or  
VIDEO In socket  
Use S-VIDEO connection if you have a  
Hi8 or S-VHS(C) camcorder. It provides  
very good picture quality.  
Option 1: Using DV IN socket  
Alternatively, you can useVIDEO  
(for DVDR615 and DVDR616 only)  
Use this connection if you have a Digital  
Video or Digital 8 camcorder. The DV  
socket will conforms to the i.Link  
standard. It provides the best picture  
quality.  
connection if your camcorder has only a  
single video output (CompositeVideo,  
CVBS). It provides good picture quality.  
1 Use a S-video cable to connect the DVD  
recorders S-VIDEO input socket to the  
appropriate S-VHS output socket on the  
camcorder.  
G Use an i.LINK 4-pin cable to connect the  
DVD recorders DV IN socket to the  
appropriate DV output socket on the  
camcorder.  
OR  
Use a video cable (yellow) to connect the  
DVD recorders VIDEO input socket to  
the appropriate video output socket on  
the camcorder.  
Before start operating, select CAM 2as  
the input channel.  
For recording, see pages 38~39.  
2 Use an audio cable (red/white) to  
connect the DVD recorders  
Helpful Hints:  
– You can also use the DV IN to connect the  
DVD recorder to a Personal Computer that  
has a DV output socket. The PC must have  
an IEEE 1394 Firewire connector.  
– The DV socket on this recorder can only  
receive input signals, it cannot output signals.  
AUDIO L/R input socket to the audio  
output socket on the camcorder.  
Before start operating, select CAM1as  
the input channel.  
For recording, see pages 38~39.  
15  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
15  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to Additional Devices (contd)  
Using analogue audio output  
sockets  
Using digital audio output  
socket  
AUDIO IN  
STEREO  
L
DIGITAL IN  
R
You can connect the DVD recorder to a  
two channel stereo system or receiver in  
order to enjoy the stereo sound system.  
You can connect the DVD recorder to a  
A/V receiver or amplifier in order to  
enjoy the home theatre systems  
surround sound capabilities.  
G Use an audio cable (red/white) to  
connect AUDIO L/R (red/white) to one  
of the following devices :  
G Use a coaxial cable to connect COAXIAL  
to one of the following devices :  
an A/V receiver or an A/V amplifier with a  
digital multi-channel sound decoder  
a receiver with two channel digital stereo  
(PCM)  
a stereo system (for example, mini system  
orTV)  
a receiver with Dolby Surround Pro Logic  
a receiver with two channel analogue  
stereo  
Before start operating, set the Digital  
Output accordingly (see page 58). If the  
Digital Output setting does not match  
your stereos capabilities, the stereo may  
produce a strong, distorted sound or no  
sound at all.  
Before start operating, set the Analogue  
Output accordingly (see page 54).  
Choose a sound mode setting that is  
most compatible with the connected  
devices.  
Helpful Hints:  
CAUTION!  
– Digital multi-channel sound offers the best  
possible sound quality. You will need a multi-  
channel A/V receiver or amplifier that  
supports at least one of the audio formats of  
the DVD recorder (MPEG2, Dolby Digital).  
See your receiver’s manual to find out which  
audio formats it supports.  
Do not use the Phonoinput on an  
amplifier to connect to the DVD  
recorder. This input socket is designed  
only for record players without  
preamplifiers. The DVD recorder or the  
amplifier may be damaged as a result.  
– Playback in six-channel digital surround  
sound is only possible if the receiver has a  
digital multi-channel sound decoder.  
16  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
16  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
1
2
3
5
6
8
9
4
7
1.3  
CH-  
CH+  
@
!
#
DV IN  
CAM  
0
2
CAM  
1
1 STANDBY-ON 2  
Turn on or off the DVD recorder.  
Sockets behind the flap  
Flip down the door as indicated by the  
OPEN 2label at the right hand corner.  
2 Disc tray  
0 S-VIDEO  
3 OPEN/CLOSE ç  
S-video input for SVHS/Hi8 camcorders  
or SVHS/Hi8 video recorders (input  
channel number 'CAM 1').  
Open or close the disc tray.  
4 Display panel  
Show information about the current  
status of the DVD recorder.  
! VIDEO  
Video input for camcorders or video  
recorders (input channel number  
'CAM 1').  
5 PLAY 2  
Play a disc.  
@ L/R AUDIO  
6 REC 0  
Start recording the currentTV channel or  
the current video input source.  
Audio input for camcorders or video  
recorders (input channel number  
'CAM 1').  
7 PREV/CH- ∞  
# DV IN (for DVDR615, DVDR616 only)  
Go to the previous chapter/track, do a  
reverse search, or go to the previous  
channel.  
Input for digital camcorders or other  
suitable devices using this connector  
(input channel number 'CAM 2').  
8 STOP 9  
Stop playback/recording.  
9 NEXT/CH+ §  
Go to the next chapter/track, do a  
forward search, or go to the next  
channel.  
17  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
17  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
4 12: Cursor buttons for moving to the  
left or right.  
34: Cursor buttons for moving up/down  
or going to the next/previous channel.  
5 SELECT  
Select a function.  
Toggle between upper and lower case  
characters while using the alphanumeric  
keypad.  
6 REC 0  
Start recording the currentTV channel or  
the current video input source.  
CH+  
7 §  
Skip to the previous or next Chapter/  
Track.  
CH-  
Holding down the button for fast reverse  
or fast forward function.  
8 RETURN  
Return to the previous menu on a video  
CD (VCD) or some DVDs.  
9 Colour coded buttons  
A number of functions are available via  
the colour coded button. These functions  
are displayed in the bottom of the on-  
screen menu wherever applicable.  
0 TUNER  
Switch between the internal tuner mode  
(TV programmes, external channels).  
! REC MODE  
Select a recording speed : M1, M2, M2x,  
M3, M4, M6 or M8. This determines the  
quality of the recording and the amount/  
length of time you can record on a  
DVD+R(W).  
1 STANDBY-ON 2  
Turn on or off the DVD recorder.  
2 TIMER  
@ TV/DVD  
Switch between playback from the  
Access or exit the timer recording menu.  
additional devices (connected via  
EXT 2 AUX-I/O socket) and playback  
from the DVD recorder.  
3 SYSTEM-MENU  
Access or exit the system menu.  
18  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
18  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control (contd)  
# Alphanumeric keypad  
Enter numbers or letters in appropriate  
entry fields.  
Select a chapter/track number to play.  
Select aTV channel while in internal  
tuner mode.  
13  
$ BROWSER  
Display the on-screen Media Browser  
that allows you to browse through and  
manage the contents stored in the  
currently loaded disc.  
14  
15  
CH+  
% DISC-MENU  
Access to DVDs disc menu or Index  
Picture screen of a DVD+R(W).  
16  
^ OK  
CH-  
17  
Store or confirm an entry.  
18  
19  
20  
& EDIT  
Access or exit the edit menu.  
* STOP 9  
Stop playback/recording.  
Holding down the button will open or  
close the disc tray.  
21  
22  
( PLAY 2  
Play a disc.  
23  
24  
) PAUSE ;  
Pause the playback or recording.  
Press repeatedly to advance a paused  
picture one frame at a time.  
¡ T/C (Title/Chapter)  
Select a 'T'(title)/'C'(chapter) directly on  
the menu bar.  
TV MODE  
TVVOL + / -  
Switch toTV source mode.  
After that, you may use the following  
buttons to control most of the PhilipsTV  
set:  
Adjust the volume of theTV set (for  
PhilipsTV with RC5 code only).  
£ DVD MODE  
Switch to DVD source mode.  
After that, you cannot use the buttons on  
the remote control to operate your  
PhilipsTV.  
STANDBY 2: Turn off theTV set.  
0-9: Press to select aTV channel at the  
TV.  
34: Press to changeTV channels at  
theTV.  
19  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
19  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control (contd)  
Inserting Batteries  
Using the remote control to  
operate the system  
3
1 Aim the remote  
control directly at the  
remote sensor (iR)  
on the front panel.  
1
2
2 Select the source you  
wish to control by  
1 Open the battery compartment.  
pressing one of the  
source select buttons  
on the remote control  
(for exampleTV-  
2 Insert two batteries type R06 or AA,  
following the indications (+-) inside the  
compartment.  
MODE, DVD-MODE).  
3 Close the cover.  
3 Then select the  
desired function (for  
example S, T).  
Caution!  
Remove batteries if they are  
exhausted or if the remote control  
is not to be used for a long time.  
Do not mix batteries (old and new  
or carbon and alkaline, etc.).  
Batteries contain chemical  
substances, so they should be  
disposed of properly.  
Using the alphanumeric keypad to  
enter the characters  
Press a number button as often as the  
required character or the number  
appears.  
To enter language-dependent characters,  
press or §on the corresponding  
character.  
To enter a space, press button {1}.  
20  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
20  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder  
6 Press 4to select { Done } and press OK  
to confirm.  
First Installation  
The First Installation menu will appear  
the very first time you turn on the DVD  
recorder. These settings will help you set  
up the basic DVD recorder features  
easily, includingTV channels and language  
options.  
The { TV Format } menu appears on  
theTV.  
TV FORMAT  
Select your TV format  
TV Format  
Done  
4:3 Panscan  
4:3 Letterbox  
16:9  
IMPORTANT!  
You have to turn on yourTV and  
select the correctVideo In channel  
to see the First Installation menu.  
You have to complete the First  
Installation before start operating  
the DVD recorder.  
7 Select { TV Format } and press 2.  
16:9  
1 Press STANDBY-ON 2 to turn on the  
DVD recorder.  
4:3 Letterbox  
The { Language and Country }  
menu appears on theTV.  
LANGUAGE AND COUNTRY  
Select Language and Country  
4:3 Panscan  
Menu  
Language  
Country  
English  
Spanish  
French  
8 Press 34to select the desiredTV  
screen format, then press 1to confirm.  
The format you selected will only be  
used if you insert a DVD that contains  
the same format.  
Done  
2 Select { Language } and press 2.  
3 Press 34to select the desired language  
for the on-screen display (OSD) menu,  
then press 1to confirm.  
9 Press 4to select { Done } and press OK  
to confirm.  
The { Channel Search } menu  
appears on theTV.  
4 Press 4to select { Country } and press  
2 to enter the selection field.  
CHANNEL SEARCH  
Automatic channel search will find and  
store all channels. Make sure to connect  
the antenna.  
5 Press 34to select the country of your  
residence, then press 1to confirm.  
Search channels  
Skip Search  
Start  
TIPS:  
Press OK to exit the first installation menu.  
Press RETURN to go back to previous menu item.  
21  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
21  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
Note: Make sure you have successfully  
made all the required connections to the  
DVD recorder, theTV and Satellite  
Receiver/Cable Box (if any) and switched  
them on. The automatic channel search  
will detect the signals and save all the  
available programme channels.  
Helpful Hints:  
– If the DVD recorder cannot find anyTV  
stations, select programme number {1} on  
theTV set or check the cable connection  
from the antenna socket to the DVD  
recorder and TV set.  
– If the sound or picture is distorted on any  
of the storedTV channels, see pages 23~27  
“TV channel programming” for manualTV  
search or fine-tuning.  
0 Press OK again to start automaticTV  
channel search.  
The automatic search may take 15  
minutes.  
! WhenTV channel search complete, press  
OK to continue.  
The { Time and Date } menu appears  
on theTV.  
TIME AND DATE  
Check time and date and correct if  
necessary  
Time  
Date  
09:00  
26.06.2004  
Done  
OK  
" Check if the information on the menu is  
correct.  
If required changes, follow steps 4~8  
of Setting the time and dateon page 27.  
§ Press 4to select { Done } and press OK  
to save the changes.  
The first installation is now complete.  
The first tunedTV channel appears.  
The DVD recorder is ready for use!  
TIPS:  
Press OK to exit the initial installation menu.  
Press RETURN to go back to previous menu item.  
22  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
22  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
TV channel programming  
SortingTV channels according to  
TV sequence  
Although the DVD recorder selects  
availableTV channels during first  
installation, you may want to repeat the  
process later if more channels become  
available in your area or if you are  
reinstalling the DVD recorder.  
This feature is only available if you  
have connected the DVD recorder  
to yourTV using the scart socket  
(EXT 1TOTV-I/O socket,) see page  
11.  
When the automaticTV channel search  
function is activated, theTV channels are  
stored in a specific order. This may differ  
from the order in which theTV channels  
appear on yourTV. This function changes  
the order of theTV channels stored in  
your DVD recorder to match the order  
on theTV.  
AutomaticTV channel search  
This will erase and replace all previously  
storedTV channels.  
1 Press SYSTEM-MENU on the remote  
control.  
The system menu appears on theTV.  
2 Press 4repeatedly to select { Set-up }.  
1 Press SYSTEM-MENU.  
The system menu appears on theTV.  
3 Press 2repeatedly to select { Analogue  
Ch. }.  
2 Press 4repeatedly to select { Set-up }.  
DVD-VIDEO-TITLE 04|CO1  
Analogue Ch.  
STOP  
3 Press 2repeatedly to select { Analogue  
Ch. }.  
Set-up  
Auto search  
Follow TV  
Sort  
4 Press 4repeatedly to select  
{ FollowTV } and press 2to start  
sorting.  
Favourites  
5 Press OK to confirm the message on the  
TV.  
'TV 01' will appear on the display  
panel.  
4 Press 4to select { Auto search } and  
press 2to confirm.  
The automaticTV channel search  
starts. This allows the DVD recorder to  
save all availableTV channels.  
This process may take several minutes.  
Once complete, the total number of  
channels found appears on theTV.  
6 Use theTVs remote control to select  
programme number {1} on yourTV set.  
Then, press OK on the DVD recorders  
remote control.  
If the DVD recorder finds the sameTV  
channel as on theTV set, it stores it as  
P01.  
'TV 02' will then appear on the display  
panel.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
23  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
23  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
7 Use theTVs remote control to select  
Sorting theTV channels  
programme number {2} on theTV set.  
Then, press OK on the DVD recorders  
remote control.  
You may not agree with the sequence in  
which the individualTV channels have  
been allocated to the programme  
numbers. You can use this function to  
rearrange all the storedTV channels.  
8 Repeat the above steps again until you  
have assigned all theTV channels.  
1 Press SYSTEM-MENU.  
Helpful Hints:  
The system menu appears on theTV.  
– If you cannot turn on yourTV set to  
programme number {1}, and you have  
connected additional devices to the  
EXT 2 AUX-I/O socket, please disconnect  
these devices. Other connected devices may  
have switched theTV set to the programme  
number of the scart socket.  
2 Press 4repeatedly to select { Set-up }.  
3 Press 2repeatedly to select { Analogue  
Ch. }.  
4 Press 4repeatedly to select { Sort } and  
press 2to confirm.  
– If no video signal is received from theTV  
set,“NOTV” will appear.  
A list ofTV channel programmes  
appears.  
5 Press 34to select theTV channel that  
you want to change, then press OK to  
select.  
001 ARD  
002 ZDF  
003 ORF2  
004 BC2  
005 CHAN  
006 RTL4  
007 SBS6  
001 ARD  
Sort channel  
ZDF  
003 ORF2  
004 BC2  
005 CHAN  
006 RTL4  
007 SBS6  
6 Press 34to shift theTV channel to the  
desired position and press OK to  
confirm.  
TheTV channel will be inserted after  
the current position.  
001 ARD  
002 ORF2  
003 BC2  
004 CHAN  
005 RTL4  
006 ZDF  
007 SBS6  
7 Repeat steps 5~6 until you have sorted/  
deleted all theTV channels you want.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
24  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
24  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
Setting favouriteTV channels  
ManualTV channel search  
You can set your favouriteTV channels  
for quick access by using the channel up/  
down button on the remote control.  
In some cases, not all of the availableTV  
channels may have been found and stored  
during first installation. In this case, you  
will need to search for and store the  
missing or codedTV channels manually.  
1 Press SYSTEM-MENU.  
The system menu appears on theTV.  
1 Press SYSTEM-MENU.  
2 Press 4repeatedly to select { Set-up }.  
The system menu appears on theTV.  
3 Press 2repeatedly to select { Analogue  
2 Press 4repeatedly to select { Set-up }.  
Ch. }.  
3 Press 2repeatedly to select { Analogue  
4 Press 4repeatedly to select  
{ Favourites } and press 2to confirm.  
A list ofTV channel programmes  
appears.  
Ch. }.  
DVD-VIDEO-TITLE 04|CO1  
Analogue Ch.  
STOP  
Set-up  
CH01  
CH02 NBC  
CH03  
CH04  
CH05  
Entry mode  
Entry  
MHz  
Favourites  
167.5 MHz  
P 04  
Preset  
Preset Name  
RTL4  
CH06 MTV  
CH07  
Store  
Search  
5 Press 34to select theTV channel, then  
press OK to choose either delete from  
or add to the list.  
4 Press 4repeatedly to select { Entry  
mode } and press 2to confirm.  
The addchannels are marked.  
You can access these channels by pressing  
34on the remote control.  
The deletechannels are unmarked.  
You can only access these channels by  
pressing the corresponding number  
button on the remote control.  
5 Press 34to select manual search based  
on channel allocation or frequency, and  
press 1 to confirm.  
{ MHz} (Frequency)  
{ CH } (Channel)  
{ S-CH } (Special Channel)  
6 Press 4to select { Entry } and press 2  
to confirm.  
Use the alphanumeric keypad 0-9 to  
enter the frequency or channel of theTV  
station, then press OK and followed by  
the matching colour coded button to  
select { Store }.  
OR  
G Press the matching colour coded button  
on the remote control to select  
{ Search }.  
The search always goes by increasing  
frequency or channel number.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
25  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
25  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
7 Press 4to select { Preset } and press 2  
Allocating a decoder  
to confirm.  
SomeTV channels send codedTV signals  
that can only be viewed properly with a  
purchased or rented decoder. You can  
connect such a decoder (descrambler) to  
your DVD recorder (see page 14).  
Use the alphanumeric keypad 0-9 to  
enter the preset number for the channel  
to store (e.g., '01'), then press the  
matching colour coded button to select  
{ Store }.  
The following function automatically  
activates the connected decoder for the  
TV channel you want to watch.  
8 Press 4to select { Preset name } and  
press 2to confirm.  
Use the alphanumeric keypad 0-9 to  
enter the preset name for the found  
channel or preset, then press the  
matching colour coded button to select  
{ Store }.  
1 Press SYSTEM-MENU.  
The system menu appears on theTV.  
2 Press 4repeatedly to select { Set-up }.  
Maximum four characters for preset  
name.  
3 Press 2repeatedly to select { Analogue  
Ch. }.  
9 Repeat steps 6~8 to search for other  
DVD-VIDEO-TITLE 04|CO1  
Analogue Ch.  
STOP  
TV channels.  
Set-up  
0 Press 4to select { TV system } and  
press 2to confirm.  
Decoder  
TV system  
Nicam  
Off  
On  
Use 34to select theTV system that  
produces the least distortion of picture  
and sound, then press 1to confirm.  
The availableTV system broadcast  
format for selection : { PAL-BG, PAL-I,  
PAL-DK, SECAM-BG, SECAM-DK,  
SECAM-LL }. See pages 70~71 for more  
information.  
Fine Tune  
Store  
Search  
4 Press 4repeatedly to select { Decoder }  
and press 2to confirm.  
5 Press 2to select { On } and press OK  
to confirm.  
Your decoder has now been allocated  
to thisTV channel.  
G To turn off the decoder, press 2to select  
{ Off }.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
26  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
26  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
Fine tuning theTV channels  
Setting the time and date  
If the DVD recorder does not set the  
time and date correctly, you can set the  
clock manually by following the steps  
below.  
DVD-VIDEO-TITLE 04|CO1  
Analogue Ch.  
STOP  
Set-up  
Decoder  
TV system  
Nicam  
1 Press SYSTEM-MENU on the remote  
control.  
Fine Tune  
The system menu appears on theTV.  
2 Press 4repeatedly to select { Set-up }.  
3 Press 2repeatedly to select  
To improve the sound transmission  
of theTV channel  
{ Time-date }.  
NICAM is a digital sound transmission  
system. Using NICAM, you can transmit  
either one stereo channel or two  
separate mono channels. However, if  
reception is poor and the sound  
distorted, you can turn off NICAM.  
DVD-VIDEO-TITLE 04|CO1  
Time-date  
STOP  
Set-up  
Time  
Date  
1 Move to { NICAM } and press 2to  
select { On } or { Off }.  
4 Press 4to select { Time } and press 2to  
enter the time field.  
2 Press 1to confirm.  
{ 00 : 00 } (hours : minutes )  
To finetune theTV channels  
1 Move to { Finetune } and press 2.  
5 Press 34to change the first digit and  
press 2to go to the next digit field.  
2 Press 12to fine-tune theTV channel  
manually, then press the matching colour  
coded button on the remote control to  
select { Store }.  
6 Repeat step 5 until the time is entered  
correctly, then press OK to confirm.  
7 Press 4to select { Date } and press 2to  
enter the date field.  
{ 00 : 00 : 0000 } (day : month : year).  
8 Repeat step 5 until the date is entered  
correctly, then press OK to confirm.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
27  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
27  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the DVD Recorder (contd)  
Setting the language  
You can select the language for subtitles  
and audio for DVD playback. For some  
DVDs, the subtitle/audio language can only  
be changed via the DVD disc menu. If the  
selected language is not available on the  
disc, the discs default setting language will  
be used instead.  
The menu language (on-screen display)  
for the system will remain as you set it.  
1 Press SYSTEM-MENU on the remote  
control.  
The system menu appears on theTV.  
2 Press 4repeatedly to select { Set-up }.  
3 Press 2repeatedly to select  
{ Language }.  
DVD-VIDEO-TITLE 04|CO1  
Language  
STOP  
Set-up  
Menu  
Audio  
Subtitle  
Country  
4 Press 34to select one of the options  
below at a time, then press 2.  
{ Menu }: language of the OSD menu  
{ Audio }: playback audio language  
{ Subtitle }: subtitle language  
{ Country }: location  
5 Press 34to select a desired language  
and press 1to confirm.  
6 Repeat steps 4~5 for other settings.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
28  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
28  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
IMPORTANT!  
Playable discs  
If the inhibit icon (XError)  
appears on theTV screen when a  
button is pressed, it means the  
function is not available on the  
current disc or at the current time.  
DVD discs and players are  
designed with regional restrictions.  
Before playing a disc, make sure the  
disc is for the same zone as your  
player.  
Using this DVD Recorder, you can play  
and record on the following discs:  
Recording and Playback  
DVD+RW (DVD plus’  
Rewritable);can be recorded on  
over and over.  
DVD+R (DVD plusRecordable);  
can be recorded only once.  
Do not push on the disc tray or  
put any objects other than discs on  
the disc tray. It may cause the disc  
player to malfunction.  
Playback only:  
DVDVideo (DigitalVersatile  
Disc)  
DVD-R (DVDminusRecordable);  
can only be played back when the  
recording was made in 'video mode'  
and the recording was finalised.  
Inserting a disc  
1 Press STANDBY-ON 2 to turn on the  
DVD-RW (DVD minus’  
Rewritable); can only be played  
back when the recording was made  
in 'video mode'.  
DVD recorder.  
2 Press OPEN/CLOSE /on the front of  
the DVD recorder.  
The disc tray opens.  
.
G You can also hold down the STOP 9  
button on the remote control to open  
and close the disc tray.  
Audio CD (Compact Disc  
Digital Audio)  
MP3-CD  
3 Carefully place the disc into the tray with  
the label facing up, then press  
Video CD  
(Formats 1.0, 1.1, 2.0)  
OPEN/CLOSE /.  
Make sure the disc label is facing up.  
For double-sided discs, load the side  
which you want to play facing up.  
SuperVideo CD  
4 Turn on theTV power. Select the correct  
CD-R (CD-Recordable) Audio/  
MP3 contents  
Video In channel at theTV.  
Recordable  
5 Playback will start automatically or a  
dialogue will appear on theTV (see next  
page).  
CD-RW (CD-Rewritable)Audio/  
MP3 contents  
ReWritable  
TIPS:  
Some discs cannot be played on this DVD recorder due to the configuration and characteristics  
of the disc, or due to the condition of recording and authoring software that was used.  
29  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
29  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback (contd)  
Starting disc playback  
Playing a (Super)Video CDs  
(Super)Video CDs may feature 'PBC'  
(Play Back Control). This allows you to  
play the video CDs interactively, following  
the menu on the display.  
G If a dialogue appears on theTV showing :  
{ Do you want to access the disc  
content ?}.  
Select { Yes } to show the disc content  
menu (see page 50 Browsing the discs).  
Select { No } to switch to the last  
active mode.  
If you want to remove this dialogue,  
you have to enable the { Auto play }  
function (see page 55).  
1 Insert a (Super)Video CD.  
If the PBCis on, the disc index  
menu will appear on theTV  
2 Use alphanumeric keypad 0-9 to input  
your selection or use 34to select a play  
option and press OK to confirm.  
G If the pin code entry dialogue appears on  
theTV, this means that the child lock/  
parental control was activated for the  
inserted disc (see pages 59~60).  
Use the alphanumeric keypad 0-9 on  
the remote control to enter your pin  
code (password).  
G Press RETURN on the remote control  
will return to the previous menu.  
3 To stop playback, press STOP 9.  
Helpful Hint:  
– 'PBC' mode is turned off by default. If you  
want to view the disc index menu, you have  
to turn on the 'PBC' mode (see page 57).  
G For more playback features, see pages  
32~35 Additional Playback Features.  
Playing a DVD video disc  
Playing an audio CD  
Normally the DVD disc contains a disc  
menu. You may have to make your  
selection (e.g., subtitle or audio language)  
within the disc menu.  
1 Insert an audio CD.  
Playback starts automatically.  
2 To stop playback, press STOP 9.  
The track number and total play time  
appear on the display panel.  
1 Insert a DVD.  
To access the disc menu  
G Press DISC-MENU on the remote  
control. Use alphanumeric keypad 0-9  
to input your selection or use 34to  
select a play option and press OK to  
confirm.  
Helpful Hint:  
– If theTV is turned on, the Audio CD display  
will appear on the screen. During playback,  
the number of the current track will be  
shown on the screen and display.  
To select the previous or next  
chapter/title marker  
G During playback, press T/C on the  
remote to select Titleor Chapter, then  
press / §.  
2 To stop playback, press STOP 9.  
TIPS:  
Some discs cannot be played on this DVD recorder due to the configuration and characteristics  
of the disc, or due to the condition of recording and authoring software that was used.  
30  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
30  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback (contd)  
Playing a DVD+R(W) disc  
Playing a picture disc (slide show)  
You can display JPEG pictures in the  
selected roll automatically one after the  
other at adjustable intervals.  
1 Insert a DVD+RW or DVD+R disc.  
If the disc content menu appears on  
theTV  
2 Use 1234to navigate within the  
menu and select a title to play, then press  
PLAY 2.  
1 Insert a JPEG picture disc (CD, DVD+RW,  
DVD+R).  
If the picture overview appears on  
theTV  
2 Use 1234to navigate within the  
menu and select a photo roll folder to  
play.  
3 To stop playback, press STOP 9.  
Helpful Hint:  
– If the message 'EMPTY DISC' appears  
on the display panel, this means that there  
are no recordings on this disc.  
3 Press PLAY 2to start the slide show  
playback.  
OR  
Playing an MP3 CD  
G Press OK to show 12 thumbnail pictures.  
You can use 1234to select a picture  
file, then press PLAY 2to begin playback.  
1 Insert an MP3 CD.  
If the disc content menu appears on  
theTV  
2 Use 1234to navigate within the  
menu and select the album and track to  
play, then press PLAY 2.  
4 During playback, you can select to zoom,  
flip or rotate the picture.  
Press EDIT and followed by the  
corresponds colour coded button on the  
remote control.  
3 During playback, you can press / § to  
5 To stop playback, press STOP 9.  
select the next/previous track.  
The picture overview appears.  
4 To stop playback, press STOP 9.  
The number of albums appears on the  
display.  
Supported JPEG picture formats  
This DVD recorder can read JPEG  
pictures stored on a CD-ROM, Picture  
CD, or DVD.  
Helpful Hints:  
– Only the first session of a multi-session CD  
will be played back.  
File format:  
– Further information on the album, track  
and artist will also be displayed on theTV if  
included in the ID tag.  
The file extension has to be '*.JPG' and not  
'*.JPEG'.  
It can only display DCF-standard still  
pictures or JPEG pictures e.g.TIFF. It cannot  
play back moving pictures, Motion JPEG,  
progressive JPEG and other formats, or  
pictures in formats other than JPEG, or  
pictures associated with sound e.g. AVI-files.  
It may require longer time for the DVD  
recorder to display the disc content on theTV  
due to the large number of songs/pictures  
compiled into one disc.  
TIPS:  
Some discs cannot be played on this DVD recorder due to the configuration and characteristics  
of the disc, or due to the condition of recording and authoring software that was used.  
31  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
31  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Playback Features  
UsingToolbar options  
Changing subtitle language  
This operation works only on DVDs with  
multiple subtitle languages, you can  
change the language you want while  
playing DVD.  
1 Press SYSTEM-MENU on the remote  
control.  
The system menu appears on theTV.  
This function can also be accessed via the  
Green button on the remote control.  
2 At {Toolbar }, press 2 to select  
{ Options }.  
1 Press 4 to select { Subtitle } and press  
DVD-VIDEO-TITLE 04|CO1  
Options  
STOP  
2to enter its options.  
Toolbar  
2 Press 4repeatedly until the language you  
want is selected, then press 1 to confirm.  
The languages may be numbered or  
abbreviated, such as Enfor English.  
If the language selected is not available  
on the disc, the discs default setting  
language will be used instead.  
Subtitle  
Audio  
Angle  
Zoom  
Time search  
[PLAY] [EDIT] [OK] = PLAY  
Audio  
Subtiltle  
Repeat  
Repeat A-B  
3 Press 34to select the setting you want  
to adjust.  
Helpful Hint:  
If the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at the  
current state.  
– Some DVDs discs allow subtitle language  
changes only via the DVD disc menu. To  
access the disc menu, press DISC-MENU.  
Instructions for adjusting the settings  
are provided in the following pages.  
4 To exit, press SYSTEM-MENU.  
TIPS:  
The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
32  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
32  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Playback Features (contd)  
Changing audio soundtrack  
Zooming in  
language  
This option allows you to enlarge the  
picture on theTV screen and to pan  
through the enlarged picture.  
This operation works only on DVDs with  
multiple soundtrack language orVCDs  
with multiple audio channel.  
This function can also be accessed via the  
Red button on the remote control.  
1 Press 4 to select { Zoom } and press 2  
to enter zoom in mode.  
The zoom status bar appears and  
displays the zoom factor.  
1 Press 4 to select { Audio } and press 2  
to enter its options.  
Zoom 2  
2 Press 4repeatedly until the audio  
language you want is selected, then press  
1 to confirm.  
The languages may be numbered or  
abbreviated, such as Enfor English.  
If the language selected is not available  
on the disc, the discs default setting  
language will be used instead.  
[CURSOR][OK] = Zoom In, [RETURN]=Zoom Out, [ZOOM] = Exit  
End  
Zoom Out  
Zoom In  
2 Press OK on the remote to zoom in or  
RETURN to zoom out.  
3 Use 1234to pan through the zoomed  
Helpful Hint:  
picture.  
– Some DVDs allow soundtrack language  
changes only via the DVD disc menu. To  
access the Disc Menu, press DISC-MENU.  
4 To exit zoom mode, press  
SYSTEM-MENU  
Switching camera angles  
Time search  
This option is only available with DVDs  
that contain sequences recorded from  
different camera angles. This allows you  
to view the picture from different angles.  
This option allows you to skip to a  
specific point in the current disc.  
1 Press 4 to select { Time search } and  
press 2to enter the time field.  
1 Press 4 to select { Angle } and press 2  
to enter its options.  
The time shows the elapsed playing  
time of the current disc (hours : minutes).  
The camera angles available for  
selection appears.  
2 Press 34to change the digit and press  
2to go to the next digit field.  
2 Press 34to select the camera angle you  
want to switch to, then press 1 to  
confirm.  
G You may also use the alphanumeric  
keypad 0-9 to enter the correct digit  
directly.  
3 Press OK to confirm.  
Playback skips to the selected time.  
TIPS:  
The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
33  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
33  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Playback Features (contd)  
Changing to another title/  
chapter/track  
Searching forwards/  
backwards  
When a disc contains more than one  
track, title or chapter, you can change to a  
different track, title or chapter as follows.  
You can fast forward or fast reverse a  
disc at four, eight or thirty two times  
normal playback speed.  
1 During playback, hold down (reverse)  
or §(forward) to switch to the search  
function.  
During playback,  
G Press §to go to the next title/chapter/  
track.  
The Search status bar appears. It  
displays the Search speed (-32x, -8x, -4x,  
4x, 8x or 32x).  
G Press to return to the start of the  
current title/chapter/track. Pressing ∞  
twice can return to the start of the  
previous title/chapter/track.  
The sound will be mute.  
2 Press the (reverse) or §(forward)  
button to cycle through the search  
speeds.  
OR  
G Use the alphanumeric keypad 0-9 to  
input the title/chapter/track number.  
3 To resume normal playback, press  
OR  
PLAY 2.  
G Press T/C on the remote control to  
select T(title) or C(chapter).  
Pausing playback / slow  
motion play  
OR  
G Press BROWSER on the remote  
control to display the titles list. Then  
press 34to select a title and press OK  
to start playback.  
1 During playback, press PAUSE ;to  
pause playback and display a still picture.  
2 Hold down (reverse) or §(forward)  
to start reverse or forward slow motion  
playback.  
Pressing or §repeatedly to switch  
between different slow motion speed  
(-1/2, -1/4, -1/8, 1/2, 1/4 or 1/8).  
3 To resume normal playback, press  
PLAY 2.  
TIPS:  
The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
34  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
34  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Playback Features (contd)  
Selecting various play mode  
Shuffle play  
Select shuffle play mode to allow the  
DVD recorder to randomly select and  
play tracks on the disc (MP3 and audio  
CDs only).  
Repeat play  
You can select a Chapter,Track,Title or  
the entire disc for repeat playback.  
1 Press Green button { SHUFFLE } on the  
remote control.  
1 Press Yellow button { REPEAT }  
repeatedly on the remote control to  
select one of the repeat options.  
Repeat chapter (DVD, DVD+R(W)  
only)  
It will start playback of all the chapters  
within the title in a random order.  
2 To cancel shuffle playback, press Green  
Repeat track/title  
button again.  
Repeat album/playlist (if applicable)  
Repeat entire disc (video CD, audio  
CD, DVD+R[W] only)  
Scan disc  
Repeat off  
This function allows you to preview the  
first 10 seconds of each track (CD,VCD  
DVD+RW only) on the disc.  
2 To cancel repeat playback, press the  
Yellow button repeatedly until the  
repeat mode is off or press STOP 9.  
1 During playback, press Red button  
{ SCAN } on the remote control.  
The DVD recorder skips to the next  
track after 10 seconds of playback.  
Repeating a specific segment (A-B)  
You can repeat the playback of a specific  
segment within a title/chapter/track. To  
do this, you must mark the start and end  
of the segment you want.  
2 To exit Scan disc mode, press Red button  
again.  
Normal playback resumes at the  
current track.  
1 During playback, press Blue button  
{ REPEAT A-B } on the remote control.  
This indicates that the start point has  
been marked.  
2 Press Blue button (REPEAT A-B) on the  
remote control again to mark the end of  
the segment.  
A visual marker is placed on the  
programme bar.  
Playback skips to the start of the  
marked segment. The segment is  
repeated until the repeat mode is  
cancelled.  
3 To cancel repeat playback, press Blue  
button again.  
TIPS:  
The operating features described here might not be possible for certain discs.  
Always refer to the instructions supplied with the discs.  
35  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
35  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
IMPORTANT!  
Discs for recording  
Unrecordable pictures  
Television programmes, films, video tapes,  
discs, and other materials may be  
copyrighted, it cannot be recorded on  
this recorder.  
Two different formats of DVD recordable  
discs can be used with this DVD  
recorder:  
Recording settings  
DVD+RW (DVD plusRewritable)  
Discs are re-writable can be used for  
multiple recordings once existing data is  
erased.  
Before recording, you may have to set up  
the recording mode or select the settings  
that best suit your needs and  
requirements.  
1 Press SYSTEM-MENU on the remote  
control.  
DVD+R (DVD plusRecordable)  
It can only be recorded once. After  
you have finalised a DVD+R, you cannot  
record on it or edit it any more.  
Each new recording is always added at  
the end of all previous recordings as  
existing recordings cannot be  
overwritten.  
Editing can be made on DVD+R discs  
as long as they have not been finalised. It  
is also possible to create additional  
chapter markings.  
The system menu appears onTV.  
2 Press 4to select { Preferences }.  
3 Press 2to select { Recording }.  
DVD-VIDEO-TITLE 04|CO1  
Recording  
STOP  
Preferences  
Record mode  
Language  
Chapters  
M2x  
[PLAY] [EDIT] [OK] = PLAY  
You can also delete unwanted  
recordings. However, the disc space  
occupied by the deleted recordings  
cannot be recovered for further  
recording.  
Direct record  
Filter  
On  
To play a DVD+R disc on other DVD  
player, it must be finalised (see page 46  
Finalising disc (DVD+R)). After this is  
done, no more data can be added to the  
disc.  
[PLAY] [EDIT] [OK] = PLAY  
4 Press 34to select the setting for  
recording.  
Instructions for adjusting the settings  
are provided in the following pages.  
5 To exit, press SYSTEM-MENU.  
T
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
Underlined option is the factory default setting.  
36  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
36  
9/28/04, 1:25 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording (contd)  
Recording mode  
Recording language  
The recording mode defines the picture  
quality of recordings and the maximum  
recording time for a disc. During  
playback, the correct picture quality will  
automatically be selected.  
This function can also be accessed via the  
REC MODE button on the remote  
control.  
SomeTV programmes broadcast  
additional audio language (2-channel  
sound). For example, if a programme is  
available in English and Spanish, with  
Spanish being the second language option.  
You can select the language you want as  
the default setting for recording. This  
setting will only active if aTV programme  
is transmitted in 2-channel sound.  
1 Press 4to select { Record mode } and  
When you play the recording, you can  
play only in the audio you recorded.  
press 2to enter its options.  
2 Press 34to select one of the following  
1 Press 4to select { Language } and press  
record modes.  
2to enter its options.  
Record  
Mode  
Picture Quality  
Maximum Recording  
Time per Disc  
2 Press 2to select one of the options.  
{ Lang. I } : Original broadcast  
language.  
M1  
M2  
M2x  
M3  
M4  
M6  
M8  
High quality (HQ)  
1 hour  
DVD quality-Standard Play (SP)  
DVD quality-Standard Play Plus (SP+)  
S-VHS quality-Long Play (LP)  
VHS quality-Extended Play (EP)  
VHS quality-Super Long Play (SLP)  
VHS quality-Super Extended Play (SEP)  
2 hours  
2.5 hours  
3 hours  
4 hours  
6 hours  
8 hours  
{ Lang. II } : Additional audio language  
(2-channel sound).  
3 Press 1 to confirm.  
3 Press 1 to confirm.  
Inserting chapter markers  
Helpful Hint:  
– {M1} record mode only available for  
model DVDR615 and DVDR616 only.  
You can insert a chapter markers within a  
title during recording. This lets you  
access specific points on the recorded  
disc as you would choose a chapter on a  
DVD.  
1 Press 4to select { Chapters } and press  
2to enter its options.  
2 Press 34to select one of the options.  
{ Off } : Disable this feature.  
{ Standard } : A chapter marker will  
be automatically inserted during  
recording, the interval will depend on the  
recording mode selected.  
3 Press 1 to confirm.  
T
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
Underlined option is the factory default setting.  
37  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
37  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording (contd)  
Direct record function  
Manual recording  
Use the 'Manual recording' function to  
start recording immediately (e.g., to  
record aTV show already in progress).  
To enable direct recording from yourTV  
set, make sure that the direct record  
mode is turned on. See page 40 Direct  
Recordingfor more information.  
1 Turn on theTV power. Select the correct  
1 Press 4to select { Direct record } and  
Video In channel at theTV.  
press 2to enter its options.  
2 Insert a DVD+R(W).  
2 Press 2to select one of the options.  
{ On } : Enable recording directly  
from theTV display.  
If a DVD+RW was inserted that  
already contains recordings, press 34  
to select the location where the  
recording should be started.  
{ Off } : Disable direct record  
function.  
3 Press TUNER on the remote control to  
see theTV programmes, then press 34  
to select the programme number you  
wish to record.  
3 Press 1 to confirm.  
Filter mode  
G To record from additional device, press  
button {0} on the remote control and  
followed by 4 to select the correct input  
channel that matches the socket to which  
you connected to the DVD recorder.  
{ CAM 2 } : DV IN socket at the front  
{ CAM 1 } : S-VIDEO orVIDEO and  
AUDIO L/R sockets at the front  
{ EXT 2 } : EXT 2 AUX-I/O Scart  
socket at the back  
For long play or extended play recording,  
you can select a suitable filter mode to  
optimise the video recording. The setting  
does not influence high quality or  
standard play recording mode.  
1 Press 4to select { Filter } and press 2  
to enter its options.  
2 Press 2to select one of the options.  
{ Standard } : Recording quality is as  
the recording mode selected.  
{ EXT 1 } : EXT 1TOTV-I/O Scart  
socket at the back  
{ Sport } : Improve recording of  
images that move quickly. Optimise the  
picture quality in record mode M3~M8.  
4 Press REC 0to start recording.  
5 For recording from external device, you  
have to start play on the external device.  
3 Press 1 to confirm.  
G While recording in progress, you can  
press OK to insert a chapter marker  
wherever necessary.  
T
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
Underlined option is the factory default setting.  
38  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
38  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording (contd)  
6 To stop the recording, press STOP 9.  
MENU UPDATEor CREATE MENU’  
appears on the display panel to indicate  
that the DVD recorder is writing the list  
of contents. Wait until the message  
disappears before removing the  
DVD+R(W).  
Manual recording with  
automatic turn-off (One  
Touch Recording)  
1 Follow the steps 1~3 of Manual  
Recordingon page 38.  
2 Press REC 0on the remote control  
twice to start 30 minutes recording.  
Each time you press REC 0you will add  
30 minutes to the recording time.  
The recorder will stop recording at  
the designated end time and turn off  
automatically.  
G If the end of a disc is reached during  
recording, recording will stop and the  
DVD recorder will turn off automatically.  
Pausing a recording  
1 During recording, press PAUSE ;.  
You can use this function to avoid  
recording commercials.  
G If you wish to delete the recording, press  
STOP 9while the display showing the  
recording time.  
2 To continue recording, press REC 0.  
G To check the remaining recording time  
while recording in progress, press  
SYSTEM-MENU.  
Helpful Hints:  
– If you insert recordings between existing  
recordings, check the lengths of the old and  
new recordings. If the new recording is too  
long the subsequent recording (title/chapter)  
will be overwritten.  
– The length of recording available depends  
on the current recording mode and the  
amount of time available on the disc.  
TIPS:  
To play a DVD+R on other DVD players, see Finalising disc (DVD+R).  
39  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
39  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording (contd)  
Direct recording  
Deleting a recording  
The Direct Record function allows you to  
record theTV programme which you are  
currently watching when the DVD  
recorder is turned off.  
You can delete a specific recording from  
the DVD+R(W).  
1 Insert a recorded DVD+RW or an  
unfinalised DVD+R.  
1 Turn on the { Direct record } mode in  
The Index Picture screen or disc  
content menu appears on theTV.  
the recording setting (see page 38).  
2 On theTV, select the programme number  
2 Use 1234to select an entry in the  
you want to record.  
menu.  
3 With the DVD recorder turned off, press  
REC 0.  
3 Press the matching colour coded button  
on the remote control to select  
{ Delete }.  
The system will compare the selected  
TV channel on theTV set with its stored  
TV channels. If the sameTV channel is  
found, it switches the DVD recorder to  
the corresponding programme number  
and starts recording.  
The current recording will be deleted.  
For DVD+RW only, a new recording  
can now be made here.  
G To delete all the recordings, see pages  
54~55 Accessing to the Preferences  
options - Discand select { Delete all }.  
4 To stop recording, press STOP 9.  
Helpful Hint:  
– Do not change channels during the search,  
this could affect the tuning of the DVD  
recorder.  
TIPS:  
To play a DVD+R on other DVD players, see Finalising disc (DVD+R).  
40  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
40  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording  
Introduction  
Programming recordings  
Use 'Timer Recordingto automatically  
start and stop a recording at a later date/  
time. The DVD recorder will tune to the  
right programme number and begin  
recording at the specified time.  
1 Turn on theTV power. Select the correct  
Video In channel at theTV.  
2 Press TIMER on the remote control.  
The timer overview appears.  
With this DVD recorder, you can pre-  
programme up to six recordings within  
a period of 15 days.  
G If the time has not set yet, the { Time  
and Date } menu will appear on the  
screen, see page 27.  
3 Press the matching colour coded button  
on the remote control to select { New  
Timer }.  
To make a programmed recording,  
your DVD recorder needs to know:  
The date you want to make the  
recording.  
The programme number of theTV  
channel.  
The timer entry screen appears.  
TIMER MENU  
Start time  
11.55  
11:56  
The start and stop time of the recording.  
The recording mode (M1/M2/M2x/M3/  
M4/M6/M8), see page 37.  
Stop time  
Date  
12:26  
26:06:2004  
19 BBC24  
Once  
Preset  
Repeat  
M1  
Record Mode  
VPS/PDC  
Off  
About 'VPS/PDC’  
'VPS' (Video Programming System)/'PDC'  
(Programme Delivery Control) are used  
to control the start and duration ofTV  
channel recordings. If aTV programme  
starts earlier or ends later than was  
scheduled, the DVD recorder will then  
turn on and off at the correct time.  
{
}
Change start time  
Clear all Store  
Cancel  
4 Press 34to select an entry in the menu  
and press 2to confirm.  
5 Press 34to select an option or make an  
entry (character/number).  
Press 12to move to the previous or  
next entry field if necessary.  
If you want to program a time that is  
different from theVPS/PDC time, you  
must turn offVPS/PDC.  
{ Start time }  
Enter the start recording time and  
press OK to confirm.  
{ Stop time }  
Enter the stop recording time and  
press OK to confirm.  
{ Date }  
Enter the date for recording (Day/  
Month/Year) and press OK to confirm.  
{ Preset }  
Select the preset channel and press  
OK to confirm.  
TIPS:  
To play a DVD+R on other DVD players, seeFinalising disc (DVD+R).  
During timer recording, press STANDBY-ON will stop recording.  
41  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
41  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording (contd)  
{ Repeat }  
Helpful Hints:  
Select {Weekly}, {Once} or {Mon-Fri}  
(Monday to Friday) recordings and press  
OK to confirm.  
– Set the timer recording one minute ahead  
of the programme’s start time. This helps  
ensure the entire programme is recorded as  
the disc requires about 30 seconds to  
prepare for recording.  
{ Record mode }  
Select a record mode and press OK to  
confirm. See pages 36~37 Recording  
settings - Recording mode).  
– Programme timer recording from {CAM2}  
external input source is not possible.  
{ VPS/PDC }  
Programming recording from a  
Cable Box  
Select to turn on or offVPS/PDC  
mode. For information onVPS/PDC, see  
page 41.  
If you have a Cable Box connected to the  
DVD recorders Scart connection  
EXT 2 AUX-I/O(see page 14), follow  
the steps described below to program  
the recordings.  
G To clear the timer entries, press the  
matching colour coded button on the  
remote control to select { Clear all }.  
All the settings in the timer menu are  
cleared.  
1 Select the channel you want to record at  
the Cable Box.  
G To cancel the timer programming, press  
the matching colour coded button on the  
remote control to select { Cancel }.  
The timer overview appears.  
2 Programme the recording with the  
required information. Follow the steps  
1~9 of Programming Recordingon  
pages 41~42.  
6 Press the matching colour coded button  
on the remote control to select { Store }.  
The system will store the timer entry  
and return to the timer overview screen.  
{ Preset }  
Select { EXT2 } as the input channel  
and press OK to confirm.  
7 To exit, press TIMER.  
3 Leave the Cable Box on for the  
recording.  
8 Insert a DVD+R(W).  
9 Press STANDBY-ON to turn off the  
DVD recorder.  
The DVD recorder must be in standby  
mode in order for the timer recording to  
occur. If not, a warning message will  
appear ten minutes before the recording  
starts.  
If you ignore the warning message, the  
DVD recorder will switch to standby  
mode automatically before the  
programmed recording begins.  
The 'TIMERicon will light up on the  
display panel if a timer recording is set.  
TIPS:  
To play a DVD+R on other DVD players, seeFinalising disc (DVD+R).  
During timer recording, press STANDBY-ON will stop recording.  
42  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
42  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording (contd)  
G To clear the ShowView® entry, press the  
matching colour coded button on the  
remote control to select { Clear }.  
G To cancel the ShowView® programming,  
press the matching colour coded button  
on the remote control to select  
{ Cancel }.  
Programming recordings  
with the ShowView® System  
With this programming system, you only  
need to enter the ShowView®  
programme number as all the information  
needed by the DVD recorder for  
programming is contained in the  
programming number.  
The timer overview appears.  
5 Press OK to confirm, then press the  
matching colour coded button on the  
remote control to select { Store }.  
1 Turn on theTV power. Select the correct  
Video In channel at theTV.  
2 Press TIMER on the remote control.  
The system will store the timer entry  
and return to the timer overview screen.  
The timer overview appears.  
G If the information is missing or not  
available, you may be asked to enter more  
information. Follow the instructions on  
theTV.  
TIMER  
11.55  
TIMER DETAILS  
TIMER OVERVIEW  
10:55  
23:45  
21:00  
06:00  
08:00  
CNBCE Weekly  
Start time  
Stop time  
Date  
12:00  
Disco E 12.04  
BBC2 E Daily  
HBO E 16.04  
ABCE 13.04  
18:05  
15:07:2004  
Once  
Repeat  
Channel  
VPS  
199 BBC24  
DVD HQ  
Off  
G If you want to make changes, use  
3412to select the appropriate entry  
field. If required, make changes using 34  
or the alphanumeric keypad 0-9.  
Record Mode  
Delete  
New Timer  
Change  
ShowView  
6 To exit, press TIMER.  
3 Press the matching colour coded button  
on the remote control to select  
{ ShowView }.  
7 Insert a DVD+R(W).  
The ShowView® entry screen appears.  
8 Press STANDBY-ON to switch off the  
DVD recorder.  
TIMER MENU  
12.55  
The DVD recorder must be in standby  
mode in order for the timer recording to  
occur. If not, a warning message will  
appear ten minutes before the recording  
starts.  
ShowView system  
If you ignore the warning message, the  
DVD recorder will switch to standby  
mode automatically before the  
Clear  
Store  
Cancel  
programmed recording begins.  
The 'TIMERicon will light up on the  
display panel if a timer recording is set.  
4 Use the alphanumeric keypad 0-9 to  
enter the ShowView® code.  
(e.g.,: 5-312-4 or 5,312 4, key in 53124).  
This number is up to 9 digits long and  
can be found next to the start time of the  
TV programme in yourTV listings  
magazine.  
TIPS:  
To play a DVD+R on other DVD players, see Finalising disc (DVD+R).  
During timer recording, press STANDBY-ON will stop recording.  
43  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
43  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording (contd)  
Changing a programmed  
recording  
Deleting a programmed  
recording  
1 Turn on theTV power. Select the correct  
1 Turn on theTV power. Select the correct  
Video In channel at theTV.  
Video In channel at theTV.  
2 Press TIMER on the remote control.  
2 Press TIMER on the remote control.  
The timer overview appears.  
The timer overview appears.  
TIMER  
11.55  
TIMER DETAILS  
3 Press 34to select a timer programme  
TIMER OVERVIEW  
which you want to delete.  
10:55  
23:45  
21:00  
06:00  
08:00  
CNBCE Weekly  
Start time  
Stop time  
Date  
12:00  
Disco E 12.04  
BBC2 E Daily  
HBO E 16.04  
ABCE 13.04  
18:05  
15:07:2004  
Once  
4 Press the matching colour coded button on  
the remote control to select { Delete }.  
The current selected timer  
Repeat  
Channel  
VPS  
199 BBC24  
DVD HQ  
Off  
Record Mode  
programme is deleted from the list.  
Delete  
New Timer  
Change  
ShowView  
3 Press 34to select a timer programme  
which you want to change.  
4 Press the matching colour coded button  
on the remote control to select  
{ Change }.  
The timer entry screen of the current  
selected timer programme appears.  
5 Follow the steps 4~9 of Programming  
recordingson pages 41~42 to make the  
necessary changes.  
TIPS:  
To play a DVD+R on other DVD players, see Finalising disc (DVD+R).  
During timer recording, press STANDBY-ON will stop recording.  
44  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
44  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing/Finalising Recording  
About editing  
Index Picture screens  
The Index Picture screen shows your  
recordings on a DVD+RW or DVD+R.  
You can change disc contents and settings  
for a recorded DVD+RW or unfinalised  
DVD+R from the edit menu screen.  
Photo editing is limited to edit the  
information on a roll or album. These  
editing changes are available for the DVD  
recorder, but may not be accessible when  
you play the disc on other DVD player.  
2
3
STOP  
+RW | MY MOVIES  
MY MOVIES  
1-7  
00:22:08  
M4  
Static lights  
The Pianist  
14:01:03  
01:20:00  
M4  
The island of lost dream  
4
5
1
Lord of the Rings, The T  
21:02:03  
00:32:02  
M4  
Habla Con Ella  
The Ring  
...  
28:06:03  
6
02:20:16  
The edit menu contains the following  
editable items :  
Disc name of a DVD+R(W)  
Make DVD compatible (DVD+RW  
only)  
Finalise disc (DVD+R only)  
Title name of a title on a DVD+R(W)  
Video editing  
00:00  
7
8
[PLAY] [EDIT][OK] = PLAY  
Delete  
Protect  
An Index Picture screen represents each  
recording information saved :  
1 Name of recording (or channel number and  
time).  
2 Titles index picture  
3 Length of recording  
+RW  
Disc Name  
Compatible  
Finalise  
4 Recording mode  
5 Date of the recording  
6 Disc bar (represents the recordings, erased  
titles, protected title and blank space at the  
end of the disc)  
Title Name  
Video Edit  
7 Support function guidance  
8 Four colour coded buttons supported  
functions.  
Clear  
Colour coded buttons functions  
In the edit mode, a number of functions  
are available via the colour coded buttons  
on the remote control.  
colour coded buttons  
(red, green, yellow, blue)  
These functions are displayed in the  
bottom of the menu wherever applicable.  
{ Clear }  
Press this button to clear the entry on  
the currently selected menu item.  
TIPS:  
No further recording and editing can be carried out on a finalised DVD+R.  
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.  
45  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
45  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing/Finalising Recording (contd)  
Changing the disc/title name  
Finalising disc (DVD+R)  
This function is necessary for a DVD+R  
in order to be played back on a DVD  
player. Otherwise, the DVD+R will play  
only on this DVD recorder.  
1 Insert a recorded DVD+RW or an  
unfinalised DVD+R.  
The Index Picture screen or disc  
content menu appears on theTV.  
After finalised, no further recordings  
or editings can be made to the disc.  
Make sure that you have complete  
all the recordings and editing before  
finalising it. Unfinalise a DVD+R is  
not possible.  
2 Press EDIT on the remote control.  
The edit menu appears.  
3 Press 34to select { Disc name } or  
{ Title name } in the menu.  
4 Press 34to change the character/  
number or make an entry by using the  
alphanumeric keypad 0-9.  
Press 12to move to the previous or  
next field.  
1 Insert an unfinalised DVD+R.  
The Index Picture screen or disc  
content menu appears on theTV.  
2 Press EDIT on the remote control.  
The edit menu appears.  
5 Press OK to confirm the changes.  
The info panel is now updated.  
3 Press 34to select { Finalise } in the  
menu and press OK to confirm.  
A dialogue will appear showing the  
required process time.  
Making the editing  
compatible (DVD+RW)  
This function allows you to make an  
edited version DVD+RW compatible.  
This is required to enable the edited  
information to be seen on other DVD  
players.  
Once complete, the Index Picture  
screen appears.  
1 Insert a recorded DVD+RW.  
The Index Picture screen or disc  
content menu appears on theTV.  
2 Press EDIT on the remote control.  
The edit menu appears.  
3 Press 34to select { Compatible } in  
the menu and press OK to confirm.  
Helpful Hint:  
– If the {Compatible} not available for  
selection, it means that the disc is already  
compatible.  
TIPS:  
No further recording and editing can be carried out on a finalised DVD+R.  
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.  
46  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
46  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing/Finalising Recording (contd)  
Video editing  
Hiding unwanted chapter  
You can choose to hide certain scene for  
playback (e.g. commercial skipping) or  
make them visible again.  
In the edit video mode, the entire  
recording will be played back regardless  
of whether they are hidden or not.  
1 Follow the steps 1~4 of Video editing”  
1 Insert a recorded DVD+RW or an  
unfinalised DVD+R.  
on page 47.  
The Index Picture screen appears on  
theTV.  
2 Press PLAY 2or / §to search for  
the beginning of the chapter you want to  
hide.  
2 Press 34to select a recording.  
The selection of chapters can only be  
done within a title, make sure that you do  
not jump into the next title.  
3 Press EDIT on the remote control.  
The edit menu appears.  
4 Press 34to select { Video edit } in the  
menu and press OK to confirm.  
The video edit menu appears.  
OR  
3 Press the matching colour coded button  
on the remote control to select { Hide }.  
It will set the chapter for hide.  
The hiding chapters will only reflect  
after exit video editing mode.  
G While playing the recorded DVD+R(W),  
you can press EDIT to direct access to  
the video edit menu.  
To cancel the hidden chapters  
4 Press or §to search for the  
beginning of the chapter you want to  
unhide.  
PAUSE  
+RW | SHREK | EDIT MODE  
5 Press the matching colour coded button  
on the remote control to select  
{ Show }.  
00:01:02  
00:00  
It will set the chapter for unhide.  
[EDIT] = Exit  
No Chapters  
Chapter  
Title  
Hide  
Disc bar  
About disc bar  
In the disc bar, the record playback head  
represents the actual position of the  
playback on the disc.  
TIPS:  
No further recording and editing can be carried out on a finalised DVD+R.  
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.  
47  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
47  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing/Finalising Recording (contd)  
Editing chapter (merge/split/hide)  
Editing title (divide/append/Index  
picture)  
1 Start playback a recorded DVD+RW or  
an unfinalised DVD+R.  
1 Start playback a recorded DVD+RW or  
an unfinalised DVD+R.  
2 Press EDIT on the remote control.  
2 Press EDIT on the remote control.  
3 Press the matching colour coded button  
on the remote control to select  
{ Chapter }.  
3 Press the matching colour coded button  
on the remote control to select { Title }.  
The title editing menu appears.  
The chapter editing menu appears.  
PAUSE  
+RW | SHREK | EDIT MODE  
PAUSE  
+RW | SHREK | EDIT MODE  
00:01:02  
00:01:02  
00:00  
00:00  
[EDIT] = Exit  
Merge  
[EDIT] = Exit  
Divide  
Back  
Split  
Hide  
Append  
Back  
Index Pic.  
4 Press the matching colour coded button  
on the remote control to make your  
editing.  
4 Once you have found the scene that you  
want to use for title editing, press the  
matching colour coded button on the  
remote control to make your editing.  
{ Merge }  
Select this to merge the current  
chapter with the chapter before it.  
{ Divide } - for DVD+RW only  
Select this to divide the current title  
into two new titles. Each of these titles is  
characterised by its own index picture.  
Warning! Once a title is divided, it  
cannot be reversed.  
If the two chapters were hidden, then the  
joined chapter will also be hidden. If only  
one of the chapters is hidden, then the  
joined chapter will not be hidden.  
{ Back }  
{ Back }  
Select this to return to the previous  
screen.  
Select this to return to the previous  
screen.  
{ Index Pic. }  
{ Split }  
Select this to use the current scene as  
the titles index picture.  
Note: In the Index Picture screen,  
normally the first frame of a recording is  
shown as the titles index picture.  
Select this to insert a chapter marker,  
it will cut the current chapter to two.  
When the playback is in a chapter which  
is marked for hiding, then both new  
chapters will be hidden.  
{ Hide }  
Select this to hide the current chapter.  
TIPS:  
No further recording and editing can be carried out on a finalised DVD+R.  
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.  
48  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
48  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing/Finalising Recording (contd)  
{ Append } - for DVD+RW only  
Photo editing  
The Photo (JPEG picture) recordings on a  
DVD+R(W) are limited to edit the  
information.  
Select this to append record to the  
existing recording from the position of  
the playback. Continue steps 5~7.  
For append recording only:  
The editable information items are :  
Title of the currently selected item  
Album edit name  
5 Press 34to select the input channel to  
append : { preset programme number },  
{ EXT1 }, { EXT 2 } or { CAM1 }.  
Photo edit date  
6 Press REC 0to start append recording.  
Warning! Once the recording started,  
any prior recording from the point of the  
playback onwards will be overwritten.  
1 Insert a recorded DVD+RW or an  
unfinalised DVD+R.  
2 Use 1234to select an entry in the  
menu.  
7 To stop append recording, press  
3 Press EDIT on the remote control.  
STOP 9.  
The edit menu appears.  
Deleting chapter markers  
4 Press 34to change the character/  
number or make an entry by using the  
alphanumeric keypad 0-9.  
You can choose to delete all the chapter  
markers in the current recording.  
Press 1 2to move to the previous or  
next entry field.  
1 Follow the steps 1~3 of Video editing”  
on page 47.  
5 Press OK to confirm the changes.  
2 Press the matching colour coded button  
on the remote control to select { No  
Chapters }.  
The info panel is now updated.  
During photo (JPEG picture) playback,  
you can change the photo display.  
However, the changes cannot be stored in  
the disc.  
1 During playback, press EDIT.  
2 Press 2to select { Photo options } on  
the screen, then press 4to select  
{ Filter } or { Colour Adjust }.  
3 Press 2to access to the menu, then press  
34to select the available setting.  
Helpful Hint:  
– Editing of the audio content is not possible.  
For information on organising the  
JPEG pictures, see pages 51~53  
Browsing the picture disc.  
TIPS:  
No further recording and editing can be carried out on a finalised DVD+R.  
Press RETURN to go back to previous menu item. Press EDIT to exit the menu.  
49  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
49  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Browser  
Browsing the disc  
Colour coded buttons functions  
In the Media Browser mode, a number of  
functions are available via the colour  
coded buttons on the remote control.  
You can view and manage possible  
contents within your discs by using an  
on-screen console called the Media  
Browser.  
colour coded buttons  
(red, green, yellow, blue)  
1 Insert a disc into the DVD recorder.  
The Index Picture screen or disc  
content menu appears on theTV.  
(example of an DVD+RW)  
(example of an DVD)  
STOP  
DVDV/Title1  
+RW | MY MOVIES  
These functions are displayed in the  
bottom of the menu wherever applicable.  
TITLES  
INFO  
LengthE  
MY MOVIES  
Static lights  
The Pianist  
The island of lost dream  
1-7  
00:22:08  
M4  
0:1:14  
0:0:0  
Title1  
Title2  
Title3  
Title4  
Title5  
Title6  
14:01:03  
01:20:00  
M4  
DateE  
Child Lock  
Title Name  
Lord of the Rings, The  
Habla Con Ella  
The Ring  
T
21:02:03  
00:32:02  
M4  
Title  
1
{ Delete }  
Short Content Description  
...  
28:06:03  
02:20:16  
00:00  
[PLAY] [RETURN], [BROWSER]  
=
EXIT  
Delete the currently selected menu  
[PLAY] [EDIT][OK]  
Delete  
=
PLAY  
Protect  
item.  
G Alternatively, you can press BROWSER  
on the remote control to access the disc  
content menu.  
{ Protect } / { Unprotect }  
Protect/unprotect the selected title in  
the DVD+RW. Overwrite or edit the  
recorded title is not possible if protected.  
2 Press 2to move to the previous/next  
level of information in the menu (e.g.  
SOURCE,ALBUM,TRACK).  
{ ToAlbum }  
Add photo(s) to album.  
DVDV/  
DVDV/Title1  
{ Select }  
Add to the selection.  
SOURCE  
TITLES  
Title1  
TITLES  
INFO  
LengthE  
0:1:14  
0:0:0  
Disctray DVD-V  
Title1  
Title2  
Title3  
Title4  
Title5  
Title6  
=
Title2  
Title3  
Title4  
Title5  
Title6  
DateE  
Child Lock  
Title Name  
Title  
1
{ Select All }  
Short Content Description  
Add all items to the selection.  
[PLAY] [RETURN], [BROWSER]  
=
EXIT  
[PLAY] [RETURN], [BROWSER] = EXIT  
{ Move }  
Move photos within photo album.  
3 Press 34to view the detailed overview  
of the selected title/chapter.  
{ Remove }  
Remove the selected item in the list.  
The content is displayed within two  
panels, left panel displays the titles of the  
media and right panel displays the  
information of the current title.  
{ Rotate }  
Rotate the selected photo in 90  
degree clockwise increments.  
4 To start playback of the current title,  
{ Zoom }  
Activate zoom mode.  
press PLAY 2.  
G To change the disc content information,  
press EDIT (see page 46 Changing the  
disc/title name).  
{ Cancel }  
Cancel the operation.  
Helpful Hint:  
– The information showed on the display  
panel varies for different types of media.  
TIPS:  
Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.  
50  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
50  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Browser (contd)  
3 Press OK to display the picture overview.  
The 12 roll thumbnails picture screen  
appears.  
Browsing the picture disc  
The Media Browser allows you to view  
the JPEG pictures discs or playback as a  
slide show or store them in an album.  
06/06/2004  
DVD / Photo / Rolls / Roll KYZ  
JPEG Photo can handle up to a maximum  
of 100 photos in one album on a  
DVD+RW or DVD+R from this DVD  
recorder, depends on the JPEG file  
parameters.  
00:00  
[PLAY] [OK] [RETURN] [EDIT] [BROWSER]  
To Album Select All Select  
The supported functions are shown  
at the bottom of the disc content  
menu via the colour coded buttons  
on the remote control.  
Rotate  
4 Use 1234 to select the photo which  
you wish to add to the album.  
To make a multiple selection, press the  
matching colour button on the remote  
control to select { Select } to confirm  
each selected photo.  
Adding pictures to an album  
Photo roll is a folder for storing original  
JPEG pictures and they are protected. It  
is comparable with a conventional 35mm  
film for cameras. Rolls will be created  
automatically from the digital cameras.  
Select { Select All } to add all photos  
to the selection.  
Select { Rotate } to rotate the  
selected photo in 90 degree clockwise  
increments.  
Photo album contains different pictures  
on the rolls. You can delete an album  
without deleting the pictures of the rolls.  
5 Press the matching colour button on the  
remote control to select { To Album }.  
The Add to Photo Albummenu  
appears.  
1 Press BROWSER on the remote  
control.  
The disc content menu appears.  
6 Press 34 to select an album or create a  
new album folder which you want to add  
photo(s) to it, then press OK to confirm.  
The selected photo(s) is/are now  
stored in the album.  
2 Press 12to select photo roll menu and  
press 34to select a desired photo roll  
folder.  
DVD / Photo / Photo Rolls  
All Photo Rolls  
01.02.2003 - 1  
01.02.2003 - 2  
01.02.2003 - 3  
Berwang  
Stop  
01.02.2003 - 1  
Helpful Hint:  
– Do not pay attention to the order of the  
pictures. You can change it later in the  
album.  
Davoux  
01.02.2003  
42 photos  
Sylvia  
[PLAY] [RETURN] [BROWSER]. For overview press [OK]  
To Album  
TIPS:  
Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.  
51  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
51  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Browser (contd)  
5 Press the matching colour button on the  
remote control to select { Move }.  
A navigatorwill appear on the menu  
enable you to select the position between  
the photos.  
Changing the picture order within  
an album  
You can re-arrange the picture position in  
the album in order to create the desired  
order of the slide show. The order of the  
pictures in the photo roll remains  
unchanged.  
6 Use 1234 to move the navigator’  
around the menu and press OK to  
confirm the position where you want to  
insert the photo(s).  
1 Press BROWSER on the remote  
control.  
To cancel the move operation and  
return to the original entry point, press  
the matching colour button on the  
remote control to select { Cancel }.  
The disc content menu appears.  
2 Press 12to select photo album menu  
and press 34to select a desired photo  
album folder.  
Deleting an album  
DVD / Photo / Photo Albums  
Stop  
All Photo Albums  
Princess  
Paris  
Princess  
1 Press BROWSER on the remote  
control.  
National Day  
My home  
Baby  
The disc content menu appears.  
2 Press 12to select photo album menu  
and press 34to select the photo album  
folder to delete.  
02.03.2004  
48 photos  
Sylvia  
[PLAY] [RETURN] [EDIT]. For overview press [OK]  
Delete  
3 Press the matching colour button on the  
3 Press OK to display the picture overview.  
The 12 roll thumbnails picture screen  
appears.  
remote control to select { Delete }.  
Deleting picture in an album  
06/06/2004  
DVD / Photo / Albums / Album XYZ  
1 Follow steps 1~3 of Changing the  
picture order within an albumon page  
52.  
AUS  
2 Use 1234 to select the photo which  
you wish to delete.  
00:00  
[PLAY] [OK] [RETURN] [EDIT] [BROWSER]  
Remove Move Select  
To make a multiple selection, press the  
matching colour button on the remote  
control to select { Select } to confirm  
each selected photo.  
Rotate  
4 Use 1234 to select the photo which  
you wish to move to a different position.  
To make a multiple selection, press the  
matching colour button on the remote  
control to select { Select } to confirm  
each selected photo.  
3 Press the matching colour button on the  
remote control to select { Remove }.  
Select { Rotate } to rotate the  
selected photo in 90 degree clockwise  
increments.  
TIPS:  
Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.  
52  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
52  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Browser (contd)  
Changing the slide show settings  
Protecting the recorded title  
(DVD+RW)  
You can choose to protect the recorded  
title on an DVD+RW in order to prevent  
accidental loss of recordings.  
You can adjust the various slide show  
settings to your individual needs.  
1 Press BROWSER on the remote  
control.  
The disc content menu appears.  
1 Insert a recorded DVD+RW  
2 Press 12to select photo roll/album  
menu and press 34to select a desired  
photo roll/album folder.  
2 Press BROWSER on the remote  
control.  
The disc content menu appears.  
3 Press PLAY 2 to start slide show play.  
3 Press 34to select a recorded title.  
Album 001/Photo 001  
4 Press the matching colour coded button on  
the remote control to select { Protect }.  
G If you want to overwrite or edit the  
protected title, press the matching colour  
coded button to select { Unprotect }.  
[PAUSE] [EDIT] [RETURN] [STOP] [BROWSER]  
Zoom  
Repeat  
Speed Up  
Speed Down  
{ Zoom }  
Select this to activate zoom mode.  
In zoom mode,  
Use 1 2 3 4to pan through the  
zoomed image.  
Press the matching colour buttons  
{ Zoom Out } or { Zoom In } repeatedly  
to select the desired zoom ratio  
(2x, 4x, 8x).  
Select { End } to exit zoom mode.  
{ Repeat }  
Select this to toggle between repeat  
on and off.  
{ Speed Down } / { Speed Up }  
Select this to change the slide show  
speed :  
{ SLOW } 10 seconds interval  
{ MEDIUM } 5 seconds interval  
{ FAST } 3 seconds interval  
TIPS:  
Press RETURN to go back to previous menu item. Press BROWSER to exit the menu.  
53  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
53  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Menu - Preferences  
Accessing to the Preferences  
options  
Recording  
For more information on this menu,  
please see pages 36~38 Recording  
settings.  
1 Switch on theTV set. Select the correct  
Video In channel at theTV.  
2 Press SYSTEM-MENU on the remote  
control.  
Sound  
DVD-VIDEO-TITLE 04|CO1  
Sound  
STOP  
The system menu appears onTV.  
Preferences  
3 Press 4to select { Preferences }.  
Sound Mode  
Night Mode  
DVD-VIDEO-TITLE 04|CO1  
Recording Sound Disc Access  
STOP  
Preferences  
Set-up  
{ Sound mode }  
You can select from the following settings  
how sound will be played back by devices  
connected to the analogue outputs (L/R  
AUDIO OUT).  
[PLAY] [EDIT] [OK] = PLAY  
4 Press 2repeatedly to select one of the  
options from { Preferences } and press 4  
to select a setting you want to adjust.  
Instructions for adjusting the settings  
are provided in the following pages.  
{ Stereo } :To hear sound from the left and  
right audio channels. Use this setting when  
the DVD recorder is connected to a stereo  
TV.  
{ Surround } : For audio device that is  
compatible with Dolby Surround. Dolby  
Digital and MPEG-2 multi-channel are  
mixed to a Dolby Surround-compatible  
two-channel output signal.  
5 Press 2to enter its options and use  
1234 to make your selection.  
If the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at the  
current state.  
{ Night mode }  
Allows you to optimise the sound  
dynamics at low volume. This causes less  
disturbance in quiet environments. This  
setting only functions with Dolby Digital  
Audio on DVDs.  
6 Press 1to confirm.  
7 To exit, press SYSTEM-MENU.  
{ On } : Select this to level out the volume.  
High volume outputs will be softened and  
low volume outputs are brought upward to  
an audible level.  
{ Off } : Select this when you want to enjoy  
the surround sound with its full dynamic  
range.  
TIPS:  
Underlined option is the factory default setting.  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
54  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
54  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Menu - Preferences (contd)  
Disc  
Features  
DVD-VIDEO-TITLE 04|CO1  
Disc  
STOP  
DVD-VIDEO-TITLE 04|CO1  
Features  
STOP  
Preferences  
Preferences  
Adapt menu  
Delete all  
Auto resume  
Auto play  
Dealer demo  
{ Adapt menu }  
{ Auto resume }  
If a DVD+RW has been recorded in a  
computer drive or in another DVD  
recorder, the Picture Index screen may  
not be displayed correctly. This feature  
allows you to change the format of the  
disc to Philipstype.  
Auto resume affects the last 20 DVDs  
andVideo CDs you played.  
{ On } : Play resumes where you last  
stopped playing the disc.  
{ Off } : Play starts at the beginning of the  
disc..  
Select { Adapt menu } and press OK.  
A message to confirm your action will  
appear on theTV, press OK again to  
proceed. Otherwise, press 1to exit.  
{ Auto play }  
When auto play is active, the system will  
start playback once you insert the disc.  
{ On } : Play starts automatically once you  
insert the disc.  
{ Off } :A dialogue appears on theTV once  
you insert the disc.  
{ Delete all }  
Allows you to delete all the recordings  
from the current DVD+RW or DVD+R.  
Select { Delete all } and press OK.  
A message to confirm your action will  
appear on theTV, press OK again to  
proceed. Otherwise, press 1to exit.  
{ Dealer demo }  
Allows you to display your demo  
according to the following options:  
{ Off } :Turn off dealer mode.  
{ On } :The DVD recorders display panel  
will show various features offered by the  
system while in standby mode.  
Access  
For more information on this menu,  
please see pages 59~60 Setting Access  
Control.  
TIPS:  
Underlined option is the factory default setting.  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
55  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
55  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Menu - Setup  
Accessing to the Setup  
options  
System  
DVD-VIDEO-TITLE 04|CO1  
System  
STOP  
1 Turn on theTV set. Select the correct  
Set-up  
Video In channel at theTV.  
Eco mode  
Auto standby  
Second RC  
OSD  
2 Press SYSTEM-MENU on the remote  
control.  
The system menu appears onTV.  
3 Press 4repeatedly to select { Set-up }.  
Playback will pause.  
Display  
PBC  
DVD-VIDEO-TITLE 04|CO1  
STOP  
System Time-date Analogue Ch. Video output  
Set-up  
{ Eco Mode }  
When switching the DVD recorder to  
standby mode, the display panel will turn  
blank to save power.  
4 Press 2repeatedly to select one of the  
options from { Set-up } and press 4to  
select a setting you want to adjust.  
{ On } :Turn on Eco mode.  
{ Off } :Turn off Eco mode.  
{ Auto standby }  
Instructions for adjusting the settings  
are provided in the following pages.  
The system will automatically turn on to  
standby mode if you do not press any  
buttons within 15 minutes after a disc has  
stopped playing or in Browser mode.  
This is a power-saving feature.  
5 Press 2to enter its options and use  
1234 to make your selection.  
If the selection in the menu is greyed  
out, that means the feature is not  
available or not possible to change at the  
current state.  
{ On } :Turn on Auto standby mode.  
{ Off } :Turn off Auto standby mode.  
{ Second RC }  
6 Press 1to confirm.  
Allows you to control the DVD recorder  
with a second remote control (not  
supplied).  
7 To exit, press SYSTEM-MENU.  
{ On } : Enable second RC control.  
{ Off } : Disable second RC control.  
TIPS:  
Underlined option is the factory default setting.  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
56  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
56  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Menu - Setup (contd)  
{ OSD }  
Video output  
Select the level of On-screen display  
information.  
DVD-VIDEO-TITLE 04|CO1  
Video output  
STOP  
{ Full } : Complete information always  
display during use.  
{ Reduced } :The help text and colour  
button bar will remove from the display.  
{ Normal } :The help-text will remove  
from the menu.  
Set-up  
TV shape  
Black level  
Horizontal  
E
{ Display }  
Allows you to change the brightness of  
the DVD recorder display panel.  
{TV shape }  
The picture shape can be adjusted to fit  
yourTV.  
{ Bright } : Normal brightness.  
{ Dimmed } : Medium brightness.  
{ Off } :Turn off the display.  
{ 4:3 letterbox } :  
For a 'wide-screen' display  
with black bars on the top  
and bottom.  
{ 4:3 panscan } :  
For a full-height  
picture with the sides  
trimmed.  
{ 16:9 } : For wide-  
screenTV (frame  
ratio 16:9).  
{ PBC } - forVCD only  
Play Back Control allows you to play  
Video CDs (2.0) interactively, following  
the menu on the display.  
{ On } :The index menu (if available) will  
appear on theTV once you insert aVCD.  
{ Off } :TheVCD will skip the index menu  
and playback directly from the beginning.  
{ Version Info }  
It provides the software version  
{ Black level }  
Adapts the colour dynamic for NTSC  
disc.  
information for online upgrade.  
{ Normal } : Normal colour contrast.  
{ Enhance } : Improve the colour  
contrast and brighten the picture of NTSC-  
compatible DVD.  
Time-date  
For more information on this menu,  
please see page 27 Setting theTime and  
Date.  
{ Horizontal }  
Allows you to adjust the horizontal  
position of the picture on yourTV  
screen.  
Analogue channels  
For more information on this menu,  
please see pages 23~27 TV Channel  
Programming.  
Press 1 2to scroll the slider to the left or  
right. When you are satisfied with the  
position of the picture, press 4.  
TIPS:  
Underlined option is the factory default setting.  
Press 1to go back to previous menu item. To exit, press SYSTEM-MENU.  
57  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
57  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Menu - Setup (contd)  
{Video output }  
Language  
Choose the type of video output that  
matches the video connection between  
the DVD recorder and yourTV.  
For more information on this menu,  
please see page 28 Setting the language.  
{ RGBCVBS} : For RGB or CVBS  
connection.  
{ S-Video } : For S-Video connection.  
{ Automatic } : The output setting will  
automatically follow the video signal  
received.  
Audio output  
After connecting the DVD recorder to  
yourTV and other devices, you may need  
to change the digital output setting.  
Adjust the Digital Output only if you used  
the DVD recorders COAXIAL socket.  
DVD-VIDEO-TITLE 04|CO1  
Audio output  
STOP  
Set-up  
Digital output  
{ Digital output }  
{ All } : Select this if you use the  
COAXIAL socket to connect the DVD  
recorder to a stereo receiver that has a  
built-in Multi-Channel decoder.  
{ PCM } : Select this if the connected  
audio equipment is not capable of decoding  
multichannel audio. Dolby Digital and  
MPEG-2 multi-channel signals are converted  
to PCM (Pulse Code Modulation).  
{ Off } : Select this to deactivate the digital  
audio output. For example, if you use the  
AUDIO OUT sockets to connect the DVD  
recorder to aTV or Stereo system.  
TIPS:  
Underlined option is the factory default setting.  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
58  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
58  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Access Control  
6 Use the alphanumeric keypad 0-9 to  
enter your new four-digit pin code. You  
must enter the same pin code a second  
time to confirm it.  
About Access Control  
Access Control limits viewing of discs  
that exceed the limits you set. Philips  
cannot guarantee the availability of Access  
Control with all discs, and therefore  
denies any liability associated with  
unintended watching of discs.  
To cancel your change, press 4to  
select { Cancel } and press OK to  
confirm.  
Activating/Deactivating the  
child lock  
Setting or changing the pin  
code  
This function can prevent children from  
viewing discs. This DVD recorder can  
memorise settings for 50 discs. When in  
use, a four-digit pin code must be entered  
in order to play a disc.  
Enter your four-digit password to play a  
prohibited disc or if prompted for a pin  
code.  
1 Press SYSTEM-MENU on the remote  
control.  
1 Press SYSTEM-MENU on the remote  
control.  
The system menu appears on theTV.  
2 Press 4to select { Preferences }.  
The system menu appears on theTV.  
3 Press 2repeatedly to select { Access }  
2 Press 4to select { Preferences }.  
and press 4 to confirm.  
3 Press 2repeatedly to select { Access }  
4 Use the alphanumeric keypad 0-9 to  
enter your four-digit pin code.  
and press 4 to confirm.  
4 Use the alphanumeric keypad 0-9 to  
enter your four-digit pin code (see page  
59 Setting or changing the pin code).  
When doing this for the first time,  
enter any four-digit you prefer. You must  
enter the same pin code a second time to  
confirm it.  
If you forgot your four-digit pin code,  
use the Alphanumeric keypad 0-9 on  
the remote control to key in 1504and  
followed by OK button. Then, enter any  
four-digit you prefer.  
5 Press 4to select { Child lock }.  
DVD-VIDEO-TITLE 04|CO1  
Access  
STOP  
Preferences  
Child lock  
Off E  
On  
Change pin  
5 Press 4repeatedly to select  
{ Change pin } and press 2 to confirm.  
[PLAY] [EDIT] [OK] = PLAY  
Please enter New Pin  
New Pin  
Pin Code  
****  
Cancel  
6 Press 2to select { On } or { Off } setting  
and press 1 to confirm.  
If you turn on the child lock feature,  
you will need to enter the four-digit pin  
code in order to play locked discs.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
59  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
59  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Access Control (contd)  
Alternatively, we can lock the disc while  
in browser mode;  
1 Press the BROWSER on the remote  
control.  
The disc content menu appears.  
2 Press the matching colour coded button  
on the remote control to select  
{ ChildLock }.  
The disc is now locked. You must  
enter the four-digit pin code the next  
time when you insert the disc.  
Helpful Hint:  
Two-sided DVDs and multi-volume discs  
may have a different ID for each side/  
volume. To completely unlock these discs, you  
must authorise each side/volume separately.  
Authorising discs  
You can enable playback of a locked disc  
by entering the four-digit pin code,  
however, it will only allow play once.  
1 Insert the disc.  
If the disc has been locked (child lock  
on,) the pin code entry menu will appear  
on theTV.  
2 Use the alphanumeric keypad 0-9 to  
enter your four-digit pin code (see page  
59 Setting or changing the pin code).  
Playback will begin.  
If you later decide to unlock the disc  
and allow play always;  
G Follow the steps described in Activating/  
Deactivating the child lockand select  
{ Off } in the menu.  
TIPS:  
Press 1to go back to previous menu item. Press SYSTEM-MENU to exit the menu.  
60  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
60  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will  
invalidate the warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If  
you are unable to remedy a problem by following these hints, consult your dealer or  
Philips for help.  
Problem  
Solution  
No power.  
Press STANDBY-ON button on the front of the DVD recorder  
to turn on the system.  
Make sure theAC outlet has power.  
The message ISTHETV  
ON?appears on the display  
panel.  
The DVD recorder will not operate until you complete the first  
installation. Read chapter Installing the DVD Recorder - First  
Installationfor details.  
The buttons on the DVD  
recorder do not work.  
The DVD recorder may be in Dealer mode, all buttons on the  
front of the DVD recorder are locked. To deactivate the dealer  
mode :  
1) Disconnect the power cord from the power outlet.  
2) Press and hold STOP button and OPEN/CLOSE on the front  
of the recorder while you reconnect the power cord to the  
power supply.  
3) As soon as the time or '00:00' appears on the display (within  
6-10 seconds), release the buttons.  
There is a technical problem. Disconnect the DVD recorder  
from the power outlet for 30 seconds, then connect again. If the  
DVD recorder still will not operate, then reset it to the default  
factory settings :  
1) Disconnect the DVD recorder from the power outlet.  
2) Press and hold down STANDBY-ON button on the front of  
the recorder while reconnecting to the power outlet.  
3) Release STANDBY-ON button when ISTHETV ON?”  
appears on the display. All the information stored in the  
memory (programmes, time) will be cleared. Complete the  
first installation again and reset any items you have adjusted  
during your use of the recorder.  
Remote control does not  
work.  
Aim the remote control directly at the sensor on the front of the  
DVD recorder (not towardsTV). If the DVD recorder receives a  
signal from the remote control, icon D will appear on the  
display.  
Remove any obstacles between DVD recorder and the remote  
control.  
Batteries are weak, replace the batteries.  
Press DVD-MODE on the remote control.  
61  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
61  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (contd)  
Problem  
Solution  
Disc will not play.  
Insert the disc with the label facing up.  
The child lock is on. Read chapterSetting Access Control -  
Activating/Deactivating the child lockfor details.  
Wrong region code. The DVD must be coded for ALL regions or  
Region 2 in order to play on this DVD recorder.  
There is no recording on the disc or wrong disc type. Read  
chapter Playback - Playable discsfor details.  
Make sure the disc is not scratched or warped. Clean the disc or  
replace a new one.  
Check if the disc is defective by trying another disc.  
No picture.  
Turn on yourTV and set to the correctVideo In channel. Change  
theTV channel until you see the DVD screen. Read chapter  
Connecting toTV - Generalfor details.  
Check the video connection between the DVD recorder and the  
TV.  
The picture is distorted or  
black and white during  
playback.  
The disc does not match with theTV colour system standard  
(PAL/NTSC).  
The disc is dirty, clean the disc.  
Sometimes a small amount of picture distortion may appear. This  
is not a malfunction.  
If you set the Record Mode to a low-quality speed, change to a  
higher-quality speed after you finish recording. Leaving the DVD  
recorder set to a low-quality speed may affect the picture quality  
when playing DVDs later. Read chapter Recording - Recording  
settingsfor details.  
The recording can be made in colour only when theTV channels  
or the connected additional device sends a colour signal. In some  
situations, programmes that are broadcast in black and white  
cannot be recorded.  
There is picture or sound  
interference with theTV  
reception.  
Have your antenna or cableTV signal checked.  
Fine-tune yourTV channel. Read chapter Installing the DVD  
Recorder - Fine tuning theTV channelsfor details.  
Distorted sound coming  
from a connected hi-fi  
amplifier.  
Do not connect any cables from the DVD recorder to the  
'Phono' input of your amplifier.  
Do not connect the DVD recorders Coaxial DIGITAL AUDIO  
OUT socket to an analogue socket (red/white) on the connecting  
devices.  
No sound.  
Check the audio connections, the red and white sockets. Read  
chapters Connecting toTVor Connecting to Additional  
Devicesfor details.  
You cannot hear MP3 playback if you are using the Coaxial  
DIGITAL AUDIO OUT socket for sound from the DVD  
recorder.  
Set the Analogue output or Digital output correctly, based on the  
equipment you connected to the DVD recorder. Read chapter  
System Menu - Setupfor details.  
62  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
62  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (contd)  
Problem  
Solution  
Recordings are not  
TheTV channel you want to record is not stored or you selected  
the wrong programme number. CheckTV channels stored.  
If you adjust the clock after you set a timer recording, reset the  
timer recording.  
occurring as scheduled.  
New recordings cannot be  
made.  
If the DVD recorder cannot read the disc, you cannot record.  
You cannot use the DVD recorder to duplicate copyrighted  
materials (DVDs or videotapes) onto a DVD+RW/+R, COPY  
PROTECTwill be displayed.  
A finalised DVD+R has been inserted. Change disc.  
The wrongTV channel was  
decoded (recorded) after  
you programmed a  
– ‘VPS/PDCis turned on but VPS/PDC timeis wrong. Enter the  
exact VPS/PDC time.  
1) Enter the ShowView programming number of the desiredTV  
channel.  
recording using the  
ShowView system.  
2) Press OK to confirm.  
3) Check the channel number in the {Ch.} input field. If this does  
not correspond to the desiredTV channel, select this entry  
field and change the channel number.  
4) Press OK to confirm.  
A DVD+RW or DVD+R  
recorded on this DVD  
recorder will not play on a  
DVD player.  
If a recording is too short, it is possible that a DVD player cannot  
detect it. Please observe the following 'minimum recording  
times'. Recording mode : {M1} 5 minutes, {M2}10 minutes,  
{M2x} 13 minutes, {M3} 15 minutes, {M4} 20 minutes,  
{M6} 30 minutes, {M8} - 30 minutes.  
Some DVD players cannot playback DVD+RW recordings.  
You can solve this problem by using a special function :  
1) Press OPEN/CLOSE on the DVD recorder to open the disc  
tray.  
2) Insert the disc but do not close the tray.  
3) Hold down the number button {2} on the remote control until  
the tray closes. The disc is modified.  
4) If this fails to produce the desired result, repeat the procedure  
using the number button {3} on the remote control.  
5) You can restore the disc to its original condition by pressing  
and holding number button {1}.  
Warning!There is a risk that you can no longer play the disc on  
other DVD players after the following procedure. Therefore,  
apply this function with particular care.  
63  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
63  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (contd)  
Problem  
Solution  
The message 'Disc contains  
unknown data' appears.  
This message may appear if you insert a disc that was not  
finalised. DVD+R's that have not been finalised are very sensitive  
to fingerprints, dust, or dirt.This may cause problems during  
recording. To use the disc again, do the following :  
1) Make sure that the surface of the disc is clean.  
2) Press OPEN/CLOSE on the DVD recorder to open the disc  
tray.  
3) Insert the disc but do not close the tray.  
4) Hold down button number {5} on the remote control until the  
tray closes. The DVD recorder will start the repair process.  
5) If the disc is recovered, the Picture Index screen will appear.  
Please observe the following:  
Error during recording : The title may be missing.  
Error while changing the title/index picture : The original title/  
index picture may be visible.  
Error while finalising : The disc appears not to have been  
finalised.  
The index screen flickers  
when a DVD+R is inserted.  
You can finalise the disc using the following function:  
1) Press OPEN/CLOSE on the DVD recorder to open the disc  
tray.  
2) Insert the disc but do not close the tray.  
3) Hold down button number {4} on the remote control until the  
tray closes. FINALISING' appears on the display panel.  
4) If finalising has been successful, the Picture Index screen will  
appear.  
Picture is fuzzy and  
This happens if you try to copy DVDs or video cassettes that  
have been copy-protected. Even though the picture on theTV is  
fine, but the recording on a DVD+R(W) is faulty. This  
interference is unavoidable with copy-protected DVDs or video  
cassettes.  
brightness varies when  
copying DVDVideo discs or  
prerecorded video cassettes.  
The DVD+R(W) has recording lifetime, please change a new disc  
for recording.  
The message NO SIGNAL’  
appears.  
Check that the cable is plugged in firmly.  
If a recording is made from a video recorder, change the tracking  
on the video recorder.  
The DVD recorder may not be able to recognise the video input  
signal if this signal is poor or does not comply with relevant  
standards.  
64  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
64  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting (contd)  
Problem  
Solution  
The message 'Recording of  
<XX> will start within 1  
minute' appears.  
Select { Switch now } to switch the DVD recorder to standby  
mode.A programmed timer recording will only start recording if  
the DVD recorder is in standby mode.  
Select { Suspend } will suspend the timer recording.  
Select { Cancel recording } will cancel the timer recording.  
The message 'Insert  
recordable disc' appears.  
Either no disc was inserted or a disc was inserted that cannot be  
used for recordings. Insert a disc that can be recorded upon.  
Locate on the disc the right position for the recording. Press  
STOP button. Turn off the DVD recorder by pressing STANDBY-  
ON button.  
The message 'Maximum  
number of timers reached'  
appears.  
It has reached the maximum programmed, no more recordings  
are allowed. PressTIMER button, select the programmed  
recording (TIMER block) you want to check or clear using 34  
button.  
The message 'Collision'  
appears.  
The timer recording overlaps with another timer recording.  
If you ignore this warning, the programmed recording with the  
early start time will start first.  
The second recording will then lack the beginning.  
Change the information for one of the two recordings.  
Delete one of the two recordings.  
65  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
65  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display panel symbols/messages  
The following symbols/messages may  
appear on your DVD recorder display:  
G BLOCKED  
The disc tray cannot be opened or closed due  
to some mechanical obstruction.  
G COMPATIBLE  
The DVD Recorder is busy making changes to  
make the disc DVD-compatible.  
G CLOSING  
G 00:00  
Disc tray is closing.  
Multifunction display/text line  
Title/track number  
Total/elapsed/remaining title/track time  
Disc/title name  
Error or warning messages  
Additional information regarding the disc  
TV channel number or source of video  
Clock (This is displayed in Standby mode).  
TV programme title  
G COPY PROT  
The DVD/video cassette you are trying to  
copy is copy-protected.  
G DISC ERR  
An error occurred when writing the title. If  
this happens often, please clean the disc or use  
a new one.  
G DISC FULL  
Disc is full. There is no room for new  
recordings.  
G ||||||||||||||||||||||||||||||  
Disc bar: Displays the current position on  
the disc.  
Play/Record:The single flashing segment  
represents the current position of the disc  
pointer.  
Pause: Indicated by the flashing segment on  
both sides of the current position.  
Stop: Indicated by the flashing segment at  
the current position.  
G DISC UPDATE  
Updating of disc is done after the editing is  
complete.  
Entire disc is being erased.  
G DISC WARN  
An error occurred when writing the title.The  
recording will continue, but the error will be  
skipped.  
G ¡  
Tuner is selected as visible source.  
G EMPTY DISC  
Inserted disc is new or has been completely  
erased (no recordings present).  
G
Disc is the current active source.  
G TV  
G DISC UPDATE  
Entire disc is being erased.  
Modulator is turned off.The antenna signal (RF  
signal) is only connected to theTV when the  
modulator is turned off.  
G FINALISE  
The DVD+R disc is being finalised.The  
progress bar on the LED shows the status of  
the finalisation process.  
G D  
Remote control command for the DVD  
recorder has been received.  
G EMPTY TITLE  
An empty title was selected.  
G X TIMER  
A timer recording has been programmed or is  
active.  
G INFO DVD  
Information on the inserted DVD is displayed  
on the screen.  
G !SAT  
The DVD recorder is prepared for satellite  
recording.  
G CREATE MENU  
After the first recording has been successfully  
complete on a new disc, the menu structure is  
created.  
66  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
66  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display panel symbols/messages (contd)  
G IS THE TV ON?  
G POST FORMAT  
The disc is being prepared after the menu  
structure has been created.  
The DVD Recorder is currently in the first  
installation mode.Turn on yourTV and read  
the section, 'First installation', in the chapter  
'Installing the DVD Recorder'.  
G PROTECTED  
Title is copy-protected and cannot be  
recorded.  
G MAX TITLE  
The maximum number of titles has been  
reached for the disc. Each disc can have a  
maximum of 49 titles.  
G READING  
Disc is being recognised by the DVD recorder.  
G RECORDING  
A recording is currently in progress.  
G MAX CHAP  
The maximum number of chapters per title/  
disc has been reached.The maximum number  
of chapters per title is 99, and 255 per disc.  
G INSTALL  
After the automatic channel search, the menu  
for setting the time/date appears on the  
screen.  
G SYS MENU  
The on-screen menu display is on.  
G STANDBY  
G MENU UPDATE  
After a successful recording, the list of disc  
contents is updated.  
The DVD recorder has been turned off.  
G TRAY OPEN  
Disc tray is open.  
G NO DISC  
No disc has been inserted. If a disc has been  
inserted, then it is possible that the disc cannot  
be read.  
G VCD  
AVCD has been loaded into the DVD  
recorder.  
G NO SIGNAL  
No signal or poor signal strength.  
G WAIT  
Please wait until this message disappears. The  
DVD Recorder is busy processing an  
operation.  
G NTSC DISC  
A disc with NTSC recordings has been  
inserted and an attempt was made to record a  
PAL signal. Insert a new disc or use a disc  
containing PAL recordings.  
G OPENING  
Disc tray is opening.  
G PAL DISC  
A disc with PAL recordings has been inserted  
and an attempt was made to record an NTSC  
signal. Insert a new disc or use a disc  
containing NTSC recordings.  
G PHILIPS  
The DVD recorder has been turned on.  
G PHOTO MMM/NNN  
Number of the current photo (for Photo  
mode). MMM represents the order of the  
current photo, NNN represents the total  
number of photos in the album. If the number  
exceeds 999, '999' will be displayed instead.  
67  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
67  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Disc types  
Front Connections  
i.LINK DV in (IEEE 1394 4-pin)  
(DVDR615 and DVDR616)  
S-video in  
Recording :DVD+RW/+R  
Playing: DVD-Video,Video CD,  
SuperVCD,Audio CD, MP3 CD, Picture CD,  
CD-R/RW, DVD-R, DVD-RW  
Video in  
Audio left/right in  
Record modes  
Timer Recording  
recording time / picture quality  
M1: 60 minutes / high quality  
M2: 120 minutes / DVD quality  
M2x:150 minutes / DVD quality  
M3: 180 minutes /S-VHS quality  
M4: 240 minutes /VHS quality  
M6: 360 minutes /VHS quality  
M8: 480 minutes /VHS quality  
1-month timer programming, 6 events  
daily/weekly repeat recording  
ShowView /Video Plus+ programming  
VPS/PDC recording control  
Interoperability  
i.LINK DV camcorder control (DVDR615  
and DVDR616)  
TV systems  
FollowTV  
Direct Record  
Playback:  
PAL/NTSC  
PAL/NTSC  
PAL/SECAM  
Recording:  
Internal tuner:  
Video Editing Functions  
Automatic/Manual Chapter Marker  
insertion  
Append  
Divide  
Video Performance  
AD Converter  
DA Converter  
10 bit, 54 MHz  
10 bit, 54 MHz  
Audio  
Recording  
Digital Photo Manager  
Create albums  
Zoom, Rotate, Flip  
Dolby Digital  
2-channel  
Playback  
Dolby Digital, DTS.  
MPEG2 Multichannel,  
MPEGI layer 3 (MP3), PCM  
Power Supply  
220-230V, ~50 Hz  
27W power consumption (operation)  
3W power consumption (eco standby)  
Audio Performance  
DA Converter  
AD Converter  
Signal / Noise (1kHz)  
Dynamic range (1kHz)  
Cross-talk (1kHz)  
24 bit, 192 kHz  
24 bit, 96 kHz  
105 dB  
90 dB  
105 dB  
Cabinet  
Dimensions (wxhxd) : 435 x 71 x 298 mm  
NetWeight  
: 3.5 kg  
Distortion / Noise (1kHz) 90 dB  
Rear Connections  
Scart 1 (cvbs, S-video/rgb out)  
Scart 2 (cvbs, S-video/rgb in, decoder)  
S-video out  
Video out (cvbs)  
Audio left/right out  
Digital audio out (coaxial)  
RF antenna in  
RFTV out  
Mains  
68  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
68  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Analogue: Sound that has not been turned into  
numbers. Analogue sound varies, while digital  
sound has specific numerical values. These jacks  
send audio through two channels, the left and  
right.  
MPEG: Motion Picture Experts Group.  
A collection of compression systems for digital  
audio and video.  
Multichannel: DVDs are formatted to have each  
sound track constitute one sound field.  
Multichannel refers to a structure of sound tracks  
having three or more channels.  
Aspect ratio: The ratio of vertical and horizontal  
sizes of a displayed image.The horizontal vs.  
vertical ratio of conventionalTVs. is 4:3, and that of  
wide-screens is 16:9.  
PBC: Playback Control. Refers to the signal  
recorded on video CDs or SVCDs for controlling  
playback. By using menu screens recorded on a  
Video CD or SVCD that supports PBC, you can  
enjoy interactive playback and searching.  
AUDIO OUT Jacks: Red and white jacks on the  
back of the system that send audio to another  
system (TV, Stereo, etc.).  
Chapter: Sections of a picture or a music piece  
on a DVD that are smaller than titles. A title is  
composed of several chapters. Each chapter is  
assigned a chapter number enabling you to locate  
the chapter you want.  
PCM: Pulse Code Modulation. A digital audio  
encoding system.  
Region code: A system allowing discs to be  
played only in the region designated.This unit will  
only play discs that have compatible region codes.  
You can find the region code of your unit by  
looking on the product label. Some discs are  
compatible with more than one region (or ALL  
regions).  
Digital: Sound that has been converted into  
numerical values. Digital sound is available when  
you use the DIGITAL AUDIO OUT COAXIAL or  
OPTICAL jacks.These jacks send audio through  
multiple channels, instead of just two channels as  
analogue does.  
S-Video: Produces a clear picture by sending  
separate signals for the luminance and the colour.  
You can use S-Video only if yourTV has an S-Video  
In jack.  
Disc menu: A screen display prepared for  
allowing selection of images, sounds, subtitles,  
multi-angles, etc recorded on a DVD.  
Surround: A system for creating realistic three-  
dimensional sound fields full of realism by  
arranging multiple speakers around the listener.  
Dolby Digital: A surround sound system  
developed by Dolby Laboratories containing up to  
six channels of digital audio (front left and right,  
surround left and right, centre and subwoofer).  
Title: The longest section of a movie or music  
feature on DVD. Each title is assigned a title  
number, enabling you to locate the title you want.  
DTS: DigitalTheatre Systems. This is a surround  
sound system, but it is different from Dolby Digital.  
The formats were developed by different  
companies.  
VIDEO OUT jack: Yellow jack on the back of  
the DVD system that sends the DVD picture video  
to aTV.  
Index Picture Screen: A screen that gives an  
overview of a DVD+RW or DVD+R. An Index  
Picture represents each recording.  
JPEG: A very common digital still picture format.  
A still-picture data compression system proposed  
by the Joint Photographic Expert Group, which  
features small decrease in image quality in spite of  
its high compression ratio.  
MP3: A file format with a sound data compression  
system.MP3is the abbreviation of Motion  
Picture Experts Group 1 (or MPEG-1)Audio Layer 3.  
By using the MP3 format, one CD-R or CD-RW  
can contain about 10 times more data then a  
regular CD.  
69  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
69  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV System Guide  
COUNTRY  
VHF  
UHF  
DVD REGIONS  
AFGHANISTAN  
ALBANIA  
ALGERIA  
PAL/SECAM B  
PAL B  
PAL B  
5
2
5
5
4
4
2
PAL G  
PAL G  
ANGOLA  
PAL I  
PAL N  
ARGENTINA  
AUSTRALIA  
AUSTRIA  
PAL N  
PAL H  
PAL G  
PAL B  
PAL B  
PAL B  
AZORES  
BAHAMAS  
BAHRAIN  
NTSC M  
PAL B  
PAL B  
4
2
5
4
2
PAL G  
BANGLADESH  
BARBADOS  
BELGIUM  
NTSC M  
PAL B  
PAL H  
BERMUDA  
BOLIVIA  
NTSC M  
NTSC M  
PAL I  
NTSC M  
4
5
4
BOTSWANA  
BRAZIL  
BRUNEI  
PAL M  
PAL B  
PAL M  
PAL B  
SECAM K  
BULGARIA  
BURKINA FASO  
BURMA  
SECAM D  
SECAM K1  
NTSC M  
SECAM K1  
NTSC M  
PAL B  
2
5
BURUNDI  
5
3
5
1
2
5
4
6
4
4
2
4
CAMBODIA  
CAMEROON  
CANADA  
PAL G  
NTSC M  
NTSC M  
PAL B  
CANARY ISLANDS  
CHAD  
CHILE  
SECAM K1  
NTSC M  
PAL D  
NTSC M  
CHINA  
COLOMBIA  
COSTA RICA  
CROATIA  
NTSC M  
NTSC M  
PAL B  
NTSC M  
NTSC M  
PAL G  
CUBA  
CYPRUS  
NTSC M  
PAL B  
PAL D  
NTSC M  
PAL G  
PAL K  
CZECH REPUBLIC  
DAHOMEY  
DENMARK  
DJIBOUTI  
2
SECAM K1  
PAL B  
PAL G  
SECAM G  
NTSC M  
2
5
4
4
2
4
5
5
5
SECAM B  
NTSC M  
NTSC M  
SECAM B/PAL B  
NTSC M  
PAL B  
DOMINICAN REP  
ECUADOR  
EGYPT  
NTSC M  
SECAM G/PAL G  
NTSC M  
EL SALVADOR  
EQUAT. GUINEA  
ESTONIA  
PAL B (was SECAM)  
PAL B  
PAL B  
PAL D  
PAL G  
ETHIOPIA  
FIJI  
FINLAND  
FRANCE  
PAL B  
PAL G  
SECAM L  
2
2
SECAM L  
SECAM K1  
SECAM K1  
PAL I  
FRENCH POLYNESIA  
GABON  
GAMBIA  
5
5
2
5
2
2
2
GERMANY  
GHANA  
PAL B  
PAL B  
PAL B  
PAL G  
PAL G  
PAL H  
PAL G  
GIBRALTAR  
GREECE  
PAL B (was SECAM)  
NTSC/PAL B  
SECAM K1  
NTSC M  
NTSC M  
PAL K  
GREENLAND  
GUADELOUPE  
GUAM  
1
4
5
4
4
GUATEMALA  
GUINEA  
NTSC M  
NTSC M  
GUYANA (FRENCH)  
HONDURAS  
SECAM K1  
NTSC M  
70  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
70  
9/28/04, 1:26 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV System Guide (contd)  
COUNTRY  
LIBYA  
LITHUANIA  
LUXEMBOURG  
MADAGASCAR  
MADEIRA  
VHF  
SECAM B  
PAL D (was SECAM)  
PAL B/SECAM L  
SECAM K1  
PAL B  
UHF  
SECAM G  
PAL K  
DVD REGIONS  
5
5
2
5
PAL G/SEC L  
MALAGASY  
MALAWI  
SECAM K1  
PAL B  
PAL B  
PAL G  
PAL H  
5
3
5
2
MALAYSIA  
MALI  
MALTA  
SECAM K1  
PAL B  
MARTINIQUE  
MAURITANIA  
MAURITIUS  
MEXICO  
SECAM K1  
SECAM B  
SECAM B  
NTSC M  
SECAM L  
SECAM D  
SECAM B  
PAL B  
5
5
4
2
5
5
5
5
NTSC M  
MONACO  
MONGOLIA  
MOROCCO  
MOZAMBIQUE  
NAMIBIA  
PAL I  
PAL B  
PAL B  
NEPAL  
NETHERLANDS  
NETH. ANTILLES  
NEW CALEDONIA  
NEW GUINEA  
NEW ZEALAND  
NICARAGUA  
NIGER  
PAL G  
NTSC M  
2
NTSC M  
SECAM K1  
PAL B  
PAL G  
PAL G  
NTSC M  
4
4
4
5
5
2
2
5
4
4
4
3
2
2
1
2
PAL B  
NTSC M  
SECAM K1  
PAL B  
NIGERIA  
NORWAY  
PAL G  
PAL G  
PAL G  
PAL B  
PAL B  
OMAN  
PAKISTAN  
PANAMA  
PAL B  
NTSC M  
PAL N  
NTSC M  
PAL N  
PARAGUAY  
PERU  
NTSC M  
NTSC M  
PAL D  
NTSC M  
NTSC M  
PAL K  
PHILIPPINES  
POLAND  
PORTUGAL  
PUERTO RICO  
QATAR  
PAL B  
NTSC M  
PAL B  
PAL G  
NTSC M  
REUNION  
RUMANIA  
SECAM K1  
PAL D  
PAL K  
SECAM K  
2
5
5
RUSSIA  
RWANDA  
SECAM D  
SECAM K1  
PAL B  
SABAH/SAWARA  
ST. KITTS  
NTSC M  
NTSC M  
SECAM-B/PAL-B  
PAL  
NTSC M  
SAMOA (US)  
SAUDI ARABIA  
SENEGAL  
1
2
5
5
5
SECAM G  
SEYCHELLES  
SIERRA LEONE  
SINGAPORE  
SLOVAK REPUBLIC  
SOMALIA  
PAL B  
PAL B  
PAL G  
PAL G  
PAL G  
PAL  
PAL B  
PAL  
2
5
2
2
5
5
4
PAL B  
PAL I  
PAL G  
PAL I  
PAL G  
SOUTH AFRICA  
SPAIN  
PAL B  
PAL B  
PAL B  
SRI LANKA  
SUDAN  
SURINAM  
PAL G  
NTSC M  
PAL G  
PAL G  
PAL G  
NTSC M  
PAL B  
PAL B  
SWAZILAND  
SWEDEN  
2
2
2
SWITZERLAND  
SYRIA  
PAL B  
SECAM B  
71  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
71  
9/28/04, 1:27 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Meet Philips at the Internet  
DVDR610  
DVDR615  
DVDR616  
CLASS 1  
LASER PRODUCT  
3139 246 13454  
SgpJP-0440-00-1  
3139 246 13454  
1DVDR6xx_Eng00_13454c  
72  
9/28/04, 1:27 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips CD Player MCM276R User Manual
Philips Home Theater System HTS3265 98 User Manual
Philips Satellite TV System US2 MANT510 User Manual
Philips Ventilation Hood V200 User Manual
Plantronics Network Card APC 4 User Manual
Polk Audio Car Speaker polk audio mobile monitor User Manual
Porter Cable Air Compressor A18760 1006 1 User Manual
POSIFLEX Business Machines Car Video System LM TM 7115 7115N User Manual
Powermate Portable Generator PC049650317 User Manual
Precor Cross Country Skier 515e User Manual