Philips CD Player MCM276R User Manual

Micro Hi-Fi System  
MCM276R  
Philips vous remercie de  
votre confiance.  
Thank you for choosing Philips.  
Gracias por escoger Philips  
Need help fast?  
Besoin d'une aide  
rapide?  
Les Guide d'utilisation rapide et Manuel de  
l'utilisateur regorgent d'astuces destinées à  
simplifier l'utilisation de votre produit Philips.  
Toutefois, si vous ne parvenez pas à résoudre  
votre probléme, vous pouvez accéder à  
notre aide en ligne à l'adresse  
Necesita ayuda  
inmediata?  
Lea primero la Guía de uso rápido o el  
Manual del usuario, en donde encontrará  
consejos que le ayudarán a disfrutar  
plenamente de su producto Philips.  
Si después de leerlo aún necesita ayuda,  
consulte nuestro servicio de  
Read your Quick Use Guide and/or  
Owner's Manual first for quick tips  
that make using your Philips product  
more enjoyable.  
If you have read your instructions  
and still need assistance,  
you may access our online help at  
asistencia en línea en  
or call  
ou formez le  
o llame al teléfono  
1-888-PHILIPS (744-5477)  
while with your product.  
(and Model / Serial number)  
1-800-661-6162 (Francophone)  
1-888-PHILIPS (744-5477) (English speaking)  
Veillez à avoir votre produit à  
portée de main.  
1-888-PHILIPS (744-5477)  
y tenga a mano el producto.  
(y número de model / serial)  
(et model / serial nombre)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
7
1
2
6
3
5
4
9
0
!
@
%
$
#
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Clean only with dry cloth.  
materials  
Class II equipment symbol  
This symbol indicates that the unit has  
a double insulation system  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canada  
English:  
This digital apparatus does not exceed  
the Class B limits for radio noise  
emissions from digital apparatus as set  
out in the Radio Interference  
Regulations of the Canadian  
Department of Communications.  
Français:  
Cet appareil numérique n'emet pas de  
bruits radioélectriques dépassant les  
limites applicables aux appareils  
numériques de Class B prescrites dans  
le Règlement sur le Brouillage  
Radioélectrique édicté par le Ministère  
des Communications du Canada.  
CAUTION  
Use of controls or adjustments or  
performance of procedures other  
than herein may result in hazardous  
radiation exposure or other unsafe  
operation.  
ATTENTION  
L'utilisation des commandes ou  
réglages ou le non-respect des  
procédures ci-incluses peuvent se  
traduire par une exposition  
dangereuse à l'irradiation.  
ATENCIÓN  
El uso de mando o ajustes o la  
ejecucción de métodos que no sean  
los aquí descritos puede ocasionar  
peligro de exposición a radiación.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English ------------------------------------------------8  
Français -------------------------------------------- 36  
Español --------------------------------------------- 64  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
General Information  
CD  
Supplied accessories ............................................ 9  
Environmental information ................................ 9  
Safety information ................................................ 9  
Discs for playback .............................................. 19  
Playing discs ................................................... 19-20  
Selecting and searching ..................................... 20  
Selecting a different track  
Finding a passage within a track during playback  
Programming tracks........................................... 21  
Reviewing the program  
Controls  
Controls on the set ........................................... 10  
Remote control ............................................ 11-12  
Erasing the program  
Different play modes: REPEAT, SHUFFLE...... 22  
Display track information  
(MP3/WMA only) ............................................... 22  
Installation  
Placing MCM276R .............................................. 12  
Mounting stand onto the set  
Mounting MCM276R onto walls  
Rear connections ......................................... 13-14  
Speaker connections  
Tuner  
Tuning to radio stations .................................... 23  
Antenna connections  
Connecting an additional appliance.......... 14-15  
Connecting a USB device  
Programming radio stations............................. 23  
Autostore:Automatic programming  
Manual programming  
Connecting a docking cradle  
To listen to a preset station  
Using AC power ................................................. 15  
USB  
Preparations  
Using the remote control ................................ 16  
Setting the clock ................................................. 16  
Using a USB mass storage device ............. 24-25  
Playing a USB mass storage device  
Dock (optional)  
Basic Functions  
Compatible portable players ........................... 26  
Selecting the correct dock adaptor ............... 26  
Setup ..................................................................... 27  
Playing an iPod/GoGear portable player ....... 27  
Charging iPod battery using the dock ........... 27  
Switching on/off the set and  
selecting functions .............................................. 17  
Switching between Standby and  
ECO POWER mode.......................................... 17  
Auto-standby....................................................... 17  
Volume control ................................................... 18  
Volume adjustment  
MUTE  
Sound control ..................................................... 18  
Timer  
Setting the timer................................................. 28  
Activating and deactivating TIMER ................. 28  
DSC  
DBB  
SLEEP  
Displaying the clock ........................................... 18  
................................................................................ 28  
Specifications ........................................... 29  
Maintenance.............................................. 29  
Troubleshooting .............................. 30-31  
How to mount your MCM276R  
onto walls..................................................... 32  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
Supplied accessories  
Safety Information  
– 2 speaker boxes including 2 speaker cables  
– remote control (with 1 x CR2025 battery)  
– MW loop antenna  
– FM wire antenna  
– stand  
Place the system on a flat, hard and stable  
surface.  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system. Allow at least 10 cm (4 inches)  
clearance from the rear and the top of the unit  
and 5 cm (2 inches) from each side.  
– mounting kit  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers, table-cloths, curtains, etc.  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
Environmental Information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialized company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens of the disc  
unit inside the system. Should this occur, the CD  
player would not operate normally. Leave the  
power on for about one hour with no disc in the  
system until normal playback is possible.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
When the system is switched to Standby  
mode, it is still consuming some power.  
To disconnect the system from the  
power supply completely, remove the AC  
power plug from the wall socket.  
The set complies with the FCC-Rules,  
Part 15 and with RSS-210 of Industry  
Canada.  
Operation is subject  
to the following two conditions:  
1. this device may not cause harmful  
interference, and  
2. this device must accept any interference  
received, including interference that may  
cause undesired operation.  
The set complies with the FDA/DHHS Rule  
21 CFR Subchapter J in effect at Date of  
Manufacture  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
@PROGRAM  
Controls on the set (illustrations  
on page 3)  
1STANDBY-ON  
CD/USB:programs tracks  
Tuner: programs preset radio stations  
#STOP  
press briefly to switch the set on or off (standby/  
ECO POWER);  
CD/USB: stops playback; erase a program  
In standby or Eco Power mode: press and  
hold to toggle between Standby and ECO  
POWER mode (power-saving mode)  
Red indicator: lights up red when the set is  
switched to ECO POWER mode  
$DOCK terminals  
connects to a DC276 docking cradle  
%
jack for the external USB mass storage device  
2SOURCE  
Hearing Safety  
Listen at a moderate volume.  
selects sound source CD, USB,TUNER or  
DOCK  
Using headphones at a high volume can impair  
your hearing. This product can produce sounds  
in decibel ranges that may cause hearing loss for  
a normal person, even for exposure less than a  
minute. The higher decibel ranges are offered  
for those that may have already experienced  
some hearing loss.  
Sound can be deceiving. Over time your hearing  
"comfort level" adapts to higher volumes of  
sound. So after prolonged listening, what sounds  
"normal" can actually be loud and harmful to  
your hearing. To guard against this, set your  
volume to a safe level before your hearing  
adapts and leave it there.  
In standby or Eco Power mode: switches the  
set on and selects sound source CD, USB,  
TUNER or DOCK  
3IR  
sensor for the infrared remote control  
Helpful hints: Always point the remote control  
towards this sensor.  
4PUSH OPEN  
push to unfold or fold the control panel  
5CD OPEN • CLOSEç  
opens/closes the CD door  
6CD door  
7VOLUME  
To establish a safe volume level:  
adjusts the volume level  
Set your volume control at a low setting.  
Slowly increase the sound until you can hear it  
comfortably and clearly, without distortion.  
Clock/Timer: adjusts the hours and minutes  
8n  
3.5 mm headphone socket  
Helpful hints:  
Listen for reasonable periods of time:  
Prolonged exposure to sound, even at normally  
"safe" levels, can also cause hearing loss.  
Be sure to use your equipment reasonably and  
take appropriate breaks.  
– Adjust the volume to a moderate level  
before you plug in the headphones.  
– Connecting headphones will switch off the  
speakers.  
9ALBUM/ PRESET + /-  
Be sure to observe the following  
guidelines when using your headphones.  
Listen at reasonable volumes for reasonable  
periods of time.  
Be careful not to adjust the volume as your  
hearing adapts.  
Do not turn up the volume so high that you  
can't hear what's around you.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations.  
CD/USB:selects albums (for MP3/WMA only)  
TUNER: selects a preset radio station  
4 / ¢  
CD/USB:skips or searches CD tracks/titles  
backwards/forwards  
Tuner: tunes to radio stations  
ÉÅ  
CD/USB:starts or pauses playback  
0DBB (Dynamic Bass Boost)  
turns the bass enhancement on/off  
!DSC (Digital Sound Control)  
Do not use headphones while operating a  
motorized vehicle, cycling, skateboarding, etc.; it may  
create a traffic hazard and is illegal in many areas.  
selects predefined sound settings: ROCK,  
JAZZ, POP, CLASSIC  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
DOCK  
Remote control  
selects DOCK source  
In standby or Eco Power mode: switches the  
set on and selects DOCK source  
/
3VOLUME +/-  
%
1
2
3
adjusts the volume level  
Clock/Timer: adjusts the hours and minutes  
4TIMER  
displays the timer setting  
switches the timer on/off  
enters the timer setting mode (press and hold  
for more than 2 seconds)  
$
4
5
#
@
5SLEEP  
6
7
8
!
0
9
set the sleep timer  
6MUTE  
switches the sound off temporarily  
7RDS/NEWS  
no function on this set  
8SHUFFLE  
Notes for remote control:  
selects random playback  
– First select the source you wish to  
control by pressing one of the source select  
keys on the remote control (for example  
CD,TUNER).  
9REPEAT  
selects continuous playback  
0DSC (Digital Sound Control)  
– Then select the desired function (for  
example ÉÅ, 4, ¢).  
selects predefined sound settings: ROCK,  
JAZZ, POP, CLASSIC  
1B  
press briefly to switch the set on or off (standby/  
ECO POWER);  
In standby or Eco Power mode: press and  
hold to toggle between Standby and ECO  
POWER mode (power-saving mode)  
!DBB (Dynamic Bass Boost)  
turns the bass enhancement on/off  
@PROGRAM  
CD/USB:programs tracks  
2Source buttons  
Tuner: programs preset radio stations  
USB  
selects USB source  
In standby or Eco Power mode: switches the  
set on and selects USB source.  
#DISPLAY/CLOCK  
Clock:- displays the set time  
- In standby mode: enters the clock  
setting mode (press and hold for more  
than 2 seconds)  
CD  
selects CD source  
In standby or Eco Power mode: switches the  
set on and selects CD source.  
TUNER/Audio CD: switches between clock  
display and playback  
display  
MP3/WMA files: displays disc information  
TUNER  
during playback  
selects TUNER source and toggles between the  
wavebands: FM and AM  
In standby or Eco Power mode: switches the  
set on and selects TUNER source  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
Installation  
$4 / ¢  
Placing MCM276R  
CD/USB:skips or searches CD tracks  
backwards/forwards  
With the detachable stand and by-packed wall  
mounting kit, MCM276R allows you to place it in  
two ways: on desktops with stand or on  
walls without stand.  
Tuner:tunes to radio stations  
ALBUM/ PRESET 3 / 4  
CD/USB: selects the next/previous album (for  
MP3/WMA only)  
TUNER: selects a preset radio station  
Mounting stand onto the set  
MCM276R is equipped with a stand. To mount  
the stand onto the set,  
ÉÅ  
CD/USB:starts or pauses playback  
1 Put MCM276R on a flat and firm surface, rear  
9
side facing up.  
CD/USB: stops playback; erase a program  
2 As shown, align the stand to the slots at set’s  
%OPEN • CLOSEç  
bottom, 4 FRONT facing down  
opens/closes the CD door  
S
R P E S  
S S R P E  
F R O N T  
T
N O R  
F
3 Push the stand down into the slots  
When the stand is in place, you will hear a  
click  
Mounting MCM276R onto walls  
See Appendix: How to mount your  
MCM276R onto walls to learn more about  
wall mounting.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
FM wire  
antenna  
AM loop  
antenna  
Speaker  
(right)  
Speaker  
(left)  
AC power cord  
Rear connections  
Warning:  
Never make or change connections with  
the mains supply switched on.  
Install your set near the AC outlet and  
where the AC power plug can be reached  
easily.  
ASpeaker connections  
BAntenna connections  
Use the supplied speakers only. Using other  
speakers can damage the set or the sound  
quality will be negatively affected.  
AM antenna  
1 Assemble the loop antenna as shown:  
Connect the cable of the left speaker to LEFT  
(red and black) and the cable of the right  
speaker to RIGHT (red and black) as follows:  
a. Press the clip of the red terminal and fully  
insert the stripped portion of the colored (or  
marked) speaker cable into the socket, then  
release the clip  
b. Press the clip of the black terminal and fully  
insert the stripped portion of the black (or  
unmarked) speaker cable into the socket, then  
release the clip  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Or  
Connecting an additional  
appliance  
Insert the loop antenna into the slot on the set  
Connecting a USB device or memory  
card  
By connecting a USB mass storage device  
(including USB flash memory, USB flash players  
or memory cards) to the Hi-Fi system, you can  
enjoy the device’s stored music through the  
powerful speakers of Hi-Fi system.  
1 Check you have unfolded the control panel  
2 Fit the plug of the loop antenna to  
AM ANTENNA as shown below  
3 Adjust the position of the antenna for optimal  
reception (as far away as possible from theTV,  
VCR or other radiation sources)  
AM  
ANTENNA  
2 Insert the USB device’s USB plug into the socket  
on the set ‘s foldable control panel  
FM antenna  
The wire antenna supplied can only be used to  
receive nearby stations. For better reception we  
recommend using a cable antenna system or an  
outdoor antenna.  
1 Extend the wire antenna and fit it to FM  
or  
ANTENNA as shown below  
for the devices with USB cable:  
a. Insert one plug of the USB cable (not  
supplied) to the socket  
foldable control panel  
on the set ‘s  
b. Insert the other plug of the USB cable to the  
USB output terminal of the USB device  
or  
for the memory card:  
Note: If you are using a cable antenna system or  
an outdoor antenna, fit the antenna plug, instead of  
the wire antenna, to FM ANTENNA .  
a. Insert the memory card into a card reader  
(not supplied)  
b. Use a USB cable (not supplied) to connect  
2 Move the antenna in different positions for  
optimal reception (as far away as possible from  
theTV,VCR or other radiation sources)  
the card reader to the socket  
set ‘s foldable control panel  
on the  
3 Fix the antenna’s end to the wall  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Connecting a docking cradle  
See “Dock (optional)” for details.  
UsingAC power  
1 Make sure all the connections have been made  
before switching on the power supply  
2 Connect the AC power cord to the wall socket.  
This switches on the power supply  
When MCM276R is switched to standby, it is still  
consuming some power. To disconnect the  
system from the power supply completely,  
remove the power plug from the wall  
socket.  
The type plate is located on the rear of the  
set.  
Warning!  
To avoid overheating of the system, a safety  
circuit has been built in. Therefore, your  
system may switch to Standby mode  
automatically under extreme conditions. If  
this happens, let the system cool down  
before reusing it (not available for all versions).  
CAUTION  
Visible and invisible laser radiation. If the  
cover is open, do not look at the beam.  
High voltage! Do not open.You run the risk  
of getting an electric shock.  
The machine does not contain any user-  
serviceable parts.  
Modification of the product could result in  
hazardous radiation of EMC or other  
unsafe operation.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Setting the clock  
After connecting MCM276R to the power  
supply, set the clock first.  
Using the remote control  
IMPORTANT!  
– Remove the  
1 Press and hold STANDBY-ON to switch the  
set to Standby mode  
The display shows the set time  
-- --:-- -- flashes by default if you have not set  
the clock  
2 In the standby mode, press and hold DISPLAY/  
CLOCK on the remote control  
SET CLOCKscrolls on the display  
24 HR or 12 HR appears for the initial  
clock setting. To select 24-hour clock or  
12-hour clock,  
protective plastic tab  
before using the  
remote control.  
– Always point the  
remote control directly  
towards IR area.  
Notes for remote control:  
– First select the source you wish to  
control by pressing one of the source select  
keys on the remote control (for example  
CD,TUNER).  
– Then select the desired function (for  
example ÉÅ, 4, ¢).  
On the remote control, press VOLUME +/-  
once or more (or turn VOLUME on the  
set)  
On the remote control, press DISPLAY/  
CLOCK to confirm  
The hours digits start flashing  
3 Hold down or press VOLUME +/- repeatedly  
to set the hours (or turn VOLUME on the  
set)  
To replace the remote controls’  
battery  
1 Press and hold 1 as indicated.  
2 Simultaneously, pull the battery tray at 4.  
4 Press DISPLAY/CLOCK to confirm  
The minutes digits start flashing  
5 Hold down or press VOLUME +/- repeatedly  
to set the minutes (or turn VOLUME on the  
set)  
3 Remove the old battery and put a new CR2025  
battery in place.  
4 Put back the battery tray.  
6 Press DISPLAY/CLOCK to confirm  
To exit without storing the clock setting press  
STOP 9  
2
Helpful hints:  
– The clock setting will be erased when the system  
is disconnected from the power supply.  
1
3
R
2
0
2
5
L
I
T
– The set will exit from the clock setting mode if  
no button is pressed within 90 seconds.  
H
/
CAUTION!  
– Remove the battery if it is exhausted  
or will not be used for a long time.  
– Batteries contain chemical substances,  
so they should be disposed of properly.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Switching on/off the set and  
selecting functions  
1 To switch on, press STANDBY-ON or  
SOURCE on the set (or y on the remote  
control)  
The set switches to the last source selected  
OR  
On the remote control, press the source button  
(e.g. USB, CD, TUNER, DOCK)  
Helpful hints:  
2 When the set is on, press STANDBY-ON to  
switch off (or y on the remote control)  
3 To select your function, press SOURCE once  
or more on the set (or USB, CD, TUNER,  
DOCK on the remote control)  
– In the standby/Eco power mode, the tone, sound  
settings, tuner presets and the volume level (up to  
a maximum volume level of 20) will be retained in  
the set’s memory.  
Auto-standby  
When the set has reached the end of CD  
playback and remains in the stop position for  
more than 15 minutes, the set will switch off  
automatically to save power.  
/
Helpful hints:  
– You can also switch on the set by pressing  
CD OPEN • CLOSEç  
Switching between Standby and  
ECO POWER mode  
1 When the set is switched off, press and hold  
STANDBY-ON to switch between Standby  
and ECO POWER mode (or y on the remote  
control)  
In ECO POWER mode (power-saving mode):  
ECO PWR scrolls on the display  
The display is switched off  
The Red indicator lights up  
In Standby mode: The clock is displayed  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Volume control  
Volume adjustment  
Sound control  
DSC  
Adjust the volume by using theVOLUME  
rotary on the set or by pressing VOLUME +/-  
on the remote control  
VOLand the actual value (between 1 and 31)  
are displayed  
Digital Sound Control enables you to select  
predefined sound settings.  
Press DSC repeatedly to select the desired  
sound setting: ROCK, JAZZ, POP, CLASSIC  
VOL MIN is the minimum volume level  
VOL MAX is the maximum volume level  
/
DBB  
Press DBB (Dynamic Bass Boost) once or  
more to switch bass enhancement on or off.  
DBBappears if DBB is activated  
MUTE  
You can temporarily switch off the sound  
without switching off the set.  
1 Press MUTE on the remote control to switch  
off the sound  
MUTE appears. Playback continues without  
sound  
2 To switch on the sound, you can:  
– press MUTE again;  
– adjust the volume controls;  
– change source  
Displaying the clock  
During playback, press DISPLAY/CLOCK on  
the remote control repeatedly to switch  
between the clock display and the playback  
display.  
Notes:  
– When playing MP3 files, you will get track  
information (ID3 tag) by pressing DISPLAY/  
CLOCK.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
IMPORTANT!  
– Make sure that the file names of MP3 files end  
with .mp3.  
– For DRM protected WMA files, use Windows  
Media Player 10 (or later) for CD burning/  
about Windows Media Player and WM DRM  
(Windows Media Digital Rights Management).  
Discs for playback  
With this system, you can play  
– all pre-recorded audio CDs (CDDA)  
– all finalized audio CD-Rs and CD-RWs  
– MP3/WMA-CDs (CD-Rs/CD-RWs with  
MP3/WMA files)  
Playing discs  
1 Press SOURCE once or more to select CD (or  
CD on the remote control)  
IMPORTANT!  
The CD icon  
appears  
– This system is designed for regular  
discs. Therefore, do not use any  
accessories such as disc stabilizer rings or  
disc treatment sheets, etc.  
2 Press CD OPEN•CLOSEç to open the CD  
compartment.  
OPENis displayed  
About MP3/WMA  
The music compression technology MP3  
(MPEG1 Audio Layer 3) andWMA (Windows  
Media Audio) significantly reduces the digital data  
of an audio CD while maintaining CD quality  
sound.  
Windows Media Audio® is a registered  
trademark of Microsoft Corporation.  
Supported formats:  
– Disc format ISO9660, Joliet, UDF (created on  
Adaptec Direct CD) and multi-session CDs  
– MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
– Directory nesting up to a maximum of 8  
levels  
– Max. track number plus album: 500  
– WMA v9 or earlier  
3 Insert a disc with the printed side facing up.  
Press CD OPEN•CLOSEç again to close the  
compartment  
READINGis displayed as the CD player scans  
the contents of a disc  
Audio CD: the total number of tracks and  
playing time are shown  
The system will not play or support the  
following:  
• Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and will  
not be shown in the display.  
• Non-supported file formats are skipped.This  
means that e.g.: Word documents .doc or MP3  
files with extension .dlf are ignored and will not  
be played.  
MP3/WMA: Display shows current album  
number “A x x “and current track number  
T x xx”  
• DRM protected WMA files  
• WMA files in Lossless orVBR format  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Helpful hints:  
Selecting and searching  
– If you have not organized MP3/WMA files into  
any albums on your disc, an album “00” will be  
automatically assigned for all those files.  
Selecting a different track  
Press 4 / ¢ once or repeatedly until the  
desired track number appears in the display  
4 Press ÉÅ to start playback  
Display shows current track  
number and elapsed playing time  
MP3/WMA: Track information scrolls briefly  
MP3/WMA:  
Press ALBUM/ PRESET once or more to  
select the next or previous album  
Track information scrolls briefly  
or  
In the stop position, press ALBUM/ PRESET  
and 4 / ¢ to select the desired album  
and track  
MP3/WMA: Display shows current album/  
track number  
Finding a passage within a track  
during playback  
5 To pause playback, pressÉÅ. To resume  
1 During playback, press and hold 4 / ¢  
playback, press the button again  
The CD plays at a high speed  
6 To stop playback, press STOPÇ  
2 When you recognize the passage you want,  
release 4 or ¢  
Helpful hints:  
Normal playback resumes  
CD playwill also stop when  
– the CD door is opened  
– the disc has reached the end  
– you select another source:TUNER, USB or  
DOCK  
/
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Helpful hints:  
The set will return to the stop position if no  
button is pressed within 90 seconds.  
disappears. To resume programming, press  
PROGRAM.  
MP3/WMA: When playing a program, use of  
ALBUM/ PRESET are void.  
Programming tracks  
You may store up to 40 tracks in the desired  
sequence. If you like, store any track more than  
once.  
1 In the stop position, press PROGRAM to start  
programming  
flashes  
Audio CD: Display shows PROG and current  
track number  
MP3/WMA: Display shows current album/  
track number  
Erasing the program  
You can erase the contents of the memory by:  
Press STOP 9  
– once if in the stop position;  
– twice during playback;  
Press STANDBY-ON y  
Select another sound source  
Open the CD door  
disappears. CLEARscrolls  
2 Press 4 / ¢ once or repeatedly until the  
desired track number appears in the display  
MP3/WMA:press ALBUM/ PRESET and  
4 / ¢ to select the desired albumand  
track  
3 Press PROGRAM to confirm  
Display shows briefly the number of tracks  
programmed  
Then, the display shows the track number  
you just stored  
4 Repeat steps 2-3 to select and store all desired  
tracks.  
FULLis displayed if you attempt to program  
more than 40 tracks  
5 Press ÉÅ play the program  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Display track information  
(MP3/WMA only)  
Different play modes: REPEAT,  
SHUFFLE  
REPEAT TRACKplays the current track  
continuously  
The ID3 tag is part of an MP3/WMA file and  
contains various track information such as the  
track´s title or the artist´s name.  
REPEAT ALLplays the entire disc/program  
continuously  
During playback, press DISPLAY/CLOCK  
repeatedly on the remote control  
Display show title name, album name and ID3  
tag information  
SHUFFLEplays all the tracks of the CD in  
random order  
1 During playback, press once or more REPEAT  
or SHUFFLE to select play modes  
Helpful hints:  
2 To return to normal playback, press REPEAT or  
SHUFFLE repeatedly until the various modes  
are no longer displayed  
- Complete the ID3 tag information with  
your MP3/WMA encoder software before  
burning the MP3/WMA-CD.  
Helpful hints:  
– In the shuffle mode, press ¢ to select tracks.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner  
1 Press the ALBUM/ PRESET buttons once or  
more to select the preset number where  
programming should start.  
Tuning to radio stations  
1 Press SOURCE once or more to select  
TUNER (or TUNER on the remote control)  
2 Press TUNER on the remote control  
repeatedly to select your desired waveband, FM  
or AM  
Note:  
If no tuner preset number is selected, default is  
preset 1 and all your presets will be erased.  
Display shows:  
, radio station  
2 Press and hold PROGRAM until AUTO  
frequency, waveband and if programmed, a  
preset number  
appears  
flashes  
Available stations are programmed:  
FM stations followed by AM stations  
After all stations are stored, the last preset  
station will then be played  
/
Manual programming  
1 Tune to your desired station (see Tuning to  
radio stations)  
2 Press PROGRAM to activate programming  
flashes  
3 Press ALBUM/ PRESET to allocate a number  
from 1 to 40 to this station.  
3 Press and hold 4 / ¢until SEARCH  
appears  
4 Press PROGRAM to confirm  
Display shows the preset number, waveband  
and the frequency of the preset station  
The radio automatically tunes to a station  
with sufficient reception. Display shows SEARCH  
during automatic tuning  
5 Repeat steps 1-4 to store other stations  
FM:If a station is received in stereo,  
is  
You can erase a preset station by  
storing another frequency in its place  
shown  
4 Repeat step 3 if necessary until you find the  
To listen to a preset station  
desired station.  
To tune to a weak station, press 4 / ¢  
briefly and repeatedly until you have found  
optimal reception.  
Press the ALBUM/ PRESET buttons once or  
more until the desired preset station is displayed.  
Programming radio stations  
You can store up to a total of 40 radio stations  
(FM and AM) in the memory, manually or  
automatically (Autostore).  
Autostore: Automatic programming  
Automatic programming will start from preset 1  
or a chosen preset number. From this preset  
number upwards, former programmed tuner  
stations will be erased.The set will only program  
stations which are not in the memory already.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB  
How to transfer music files from PC to a  
USB mass storage device  
By dragging and dropping music files, you can  
easily transfer your favorite music from PC to a  
USB mass storage device.  
Using a USB mass storage device  
By connecting a USB mass storage device to the  
Hi-Fi system, you can enjoy the device’s stored  
music through the powerful speakers of Hi-Fi  
system.  
For the flash player, you can also use its music  
management software for the music transfer.  
However, those WMA files may be  
Playing a USB mass storage device  
Compatible USB mass storage devices  
With the Hi-Fi system, you can use  
unplayable for compatibility reasons.  
– USB flash memory (USB 2.0 or USB1.1)  
– USB flash players (USB 2.0 or USB1.1)  
– memory cards (requires an additional card  
reader to work with this Hi-Fi system)  
How to organize your MP3/WMA files  
on the USB mass storage device  
This Hi-Fi system will browse the MP3/WMA  
files in the folders/sub-folders/titles order.  
Example:  
Note:  
Root  
In some USB flash players (or memory  
devices), the stored contents are recorded using  
copyright protection technology. Such  
protected contents will be unplayable on any  
other devices (such as this Hi-Fi system).  
Title 001  
Title 002  
Title 003  
Album 01  
Supported formats:  
– USB or memory file format FAT12, FAT16,  
FAT32 (sector size: 512 - 2,048 bytes)  
– MP3 bit rate (data rate): 32-320 Kbps and  
variable bit rate  
Title 001  
Title 002  
Title 003  
Album 02  
– WMA v9 or earlier  
– Directory nesting up to a maximum of 8  
levels  
– Number of albums/ folders: maximum 99  
– Number of tracks/titles: maximum 999  
– ID3 tag v2.0 or later  
Title 001  
Title 002  
Title 003  
Album 03  
– File name in Uicode UTF8 (maximum length:  
128 bytes)  
Title 001  
Title 002  
Title 003  
The system will not play or support the  
following:  
Organize your MP3/WMA files in different  
folders or subfolders as required.  
• Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and will  
not be shown in the display.  
Note:  
• Non-supported file formats are skipped.This  
means that e.g.:Word documents .doc or MP3  
files with extension .dlf are ignored and will not  
be played.  
• AAC,WAV, PCM audio files  
• DRM protected WMA files  
– If you have not organized MP3/WMA files into  
any albums on your disc, an album “00” will be  
automatically assigned for all those files.  
– Make sure that the file names of MP3 files end  
with .mp3. and the file names of WMA files end  
with .wma.  
• WMA files in Lossless format  
– For DRM protected WMA files, use Windows  
Media Player 10 (or later) for conversion. Visit www.  
microsoft.com for details about Windows Media  
Player and WM DRM (Windows Media Digital  
Rights Management).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB  
1 Check the USB device has been properly  
connected. (See Installation: Connecting an  
additional appliance)  
2 Press SOURCE once or more to select USB  
(or USB on the remote control)  
The icon  
appears  
NO AUDIOappears if no audio file is found in  
the USB device  
3 Play the USB’s audio files as you do with the  
albums/tracks on a CD (See CD)  
Note:  
– For compatibility reasons, the album/track  
information may differ from what it is displayed  
through flash players’ music management software.  
– File names or ID3 tags will be displayed as ---  
if they are not in English.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCK (Optional)  
Portable player  
Dock  
IMPORTANT!  
Selecting the correct dock  
adaptor  
For the iPod dock, 8 dock adaptors of different  
type, as indicated at the back of the adaptor, are  
included to fit the following iPod:  
– The dock ports of this system are only  
compatible with DC276.You have to  
purchase the accessories separately. Do  
not try to connect any other dock  
accessories to this system!  
20GB, 40GB, 20/30GB Photo, 40/60GB Photo,  
30GBVideo, 60GBVideo,Mini and Nano.  
Compatible portable players  
For the Philips GoGear dock, 3 dock adaptors of  
different type are included. Each adaptor is  
marked a number from “1” to “3” at its back.  
These numbers indicate the fit Philips GoGear  
players as follows:  
1” = HDD6320/6330  
2” = HDD1420/1620/1630/1635/1820/1830/  
1835  
Most Apple iPod models with 30-pin dock  
connectors as follows: 20GB, 40GB, 20/30GB  
Photo, 40/60GB Photo, 30GBVideo, 60GBVideo,  
Mini and Nano  
Philips GoGear players with dock connectors, as  
follows:  
– HDD1420, HDD1620, HDD1630, HDD1635,  
HDD1820, HDD1830, HDD1835;  
– HDD1840, 1850;  
3” = HDD1840/1850  
– HDD6320, HDD6330  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DOCK (Optional)  
Setup  
Playing an iPod/GoGear portable  
player  
1 Correctly dock your GoGear or iPod portable  
player in the cradle. Make sure the dock adapter  
is compatible.  
1 Connect the iPod or GoGear docking cradle  
(depending on the portable player you use) to  
the MCM276R Micro Hi-Fi System by using the  
docking cable and RCA to 3.5mm jack converter  
(as shown on the last page).  
Make sure that you have powered on Philips  
GoGear before selecting DOCK source.  
On the display, "GoGear" is displayed if Philips  
GoGear is connected, or "iPod" is displayed if  
iPod is connected.  
Make sure to correctly connect the two line  
out plugs of the docking cable to the line in  
ports of the converter by matching colors  
before connecting the docking cable to the  
system.  
2 Press SOURCE on the front panel of the  
MCM276R Micro Hi-Fi System repeatedly or  
DOCK on the remote to select DOCK source.  
2 Insert a dock adapter corresponding to the  
portable player you use.  
2
3 Playback starts automatically.You can select  
available features (such as play/pause, skip track,  
fast forward/backward) during playback.  
2
1
1
Charging iPod battery using the  
dock (GoGear charging not  
supported)  
In DOCK mode, directly dock your iPod  
portable player on the cradle for charging.  
To connect with a different iPod/GoGear  
portable player, pop up the corresponding dock  
adapter and replace with a new one of the  
matching type.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer  
SLEEP  
Helpful hints:  
The timer will not work at the set time if  
- the set is switched on  
- the timer is deactivated  
The set will switch toTuner source  
automatically if :  
Setting the timer  
The set can be used as an alarm clock, whereby  
the selected source (CD,TUNER or USB) starts  
playback at a preset time. Make sure the  
clock is set before using the timer.  
- no CD is inserted when the selected source is CD;  
- no USB device is connected when the selected  
source is USB  
1 Press and hold TIMER on the remote control  
until SET TIMER appears  
flashes. SELECT SOURCEscrolls  
Display shows current source CD, TUNERor  
USB  
SLEEP  
You can set a certain period of time after which  
the set will switch off.  
2 Press SOURCE on the set repeatedly to select  
the source (or press CD,TUNER or USB on  
the remote control)  
On the remote control, press SLEEP  
repeatedly to select the desired time period  
options (in minutes):  
Display shows in sequence: Sleep 90, 75,  
60, 45, 30, 15  
3 Press TIMER to confirm  
The hours digits start flashing  
Display shows the selected option briefly and  
returns to its previous status.The icon  
appears  
4 Hold down or press VOLUME +/- repeatedly  
to set the hours (or turn VOLUME on the  
set)  
5 Press TIMER to confirm  
The minutes digits start flashing  
To deactivate the sleep timer, press  
SLEEP again  
6 Hold down or press VOLUME +/- repeatedly  
to set the minutes (or turn VOLUME on the  
set)  
The icon  
disappears  
or  
7 Press TIMER to confirm  
Press STANDBY-ON to switch off the set (or  
y on the remote control)  
The timer is now set and activated  
At the set alarm time, the CD,TUNER or  
USB will switch on (volume level: max. 20)  
Helpful hints:  
The SLEEP function does not affect your alarm  
time setting.  
Note:  
– The set will exit from the timer setting mode if  
no button is pressed within 90 seconds.  
Activating and deactivating  
TIMER  
Press TIMER on the remote repeatedly to  
activate or deactivate the timer.  
If activated, the last set source and start time  
are displayed  
If deactivated,“TIMEROFF” appears  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
USB PLAYER  
AMPLIFIER  
Output power .......................................... 2 x 5W RMS  
............................................................10 W + 10 W MPO  
........................................................................2 x 4 W FTC(1)  
Signal-to-noise ratio....................................... 75 dBA  
Frequency response ........50 – 20,000 Hz, 3 dB  
Impedance loudspeakers .....................................4 Ω  
Impedance headphones .................... 32 -1000 Ω  
.........................................................................................<0.5W  
(1) (4 W, 120-12.5 kHz, 10%THD)  
USB ................................................................... 12Mb/s,V1.1  
......................................... support MP3 and WMA files  
Number of albums/ folders................ maximum 99  
Number of tracks/titles...................... maximum 999  
SPEAKERS  
Bass reflex system  
Dimensions (w x h x d) ....160 x 269 x 90 (mm)  
GENERAL INFORMATION  
CD PLAYER  
Frequency range .................................. 30 – 18000 Hz  
Signal-to-noise ratio............................................ 75 dBA  
AC Power ................................................... 120V / 60 Hz  
Dimensions (w x h x d, with/without the stand)  
.................. 194 x 285 x 118/194 x 269 x 90 (mm)  
Weight(with/without speakers) ........... 3.8 / 2.2 kg  
Standby power consumption ............................<5 W  
Eco power standby ........................................... <0.5 W  
TUNER  
FM wave range ................................... 87.5 – 108 MHz  
AM wave range ................................... 530 - 1700 kHz  
Number of presets ........................................................ 40  
Antenna  
FM................................................................. 300wire  
AM ............................................................. Loop antenna  
Specifications and external appearance are  
subject to change without notice.  
Maintenance  
Cleaning the disc lens  
Cleaning the Cabinet  
After prolonged use, dirt or dust may  
accumulate at the disc lens.To ensure good  
playback quality, clean the disc lens with Philips  
CD Lens Cleaner or any commercially available  
cleaner. Follow the instructions supplied with  
cleaner.  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the centre  
out.  
Do not use solvents such as  
benzene, thinner, commercially  
available cleaners, or antistatic spray intended for  
analogue records.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Problem  
Solution  
Insert a disc.  
Wait until the moisture condensation at the lens  
has cleared.  
NO DISC” is displayed.  
Replace or clean the disc, see “Maintenance”.  
Use a finalised CD-RW or a correct MP3/WMA  
-CD format disc.  
Check if the number of folders exceeds 99 or  
the number of titles exceeds 999  
Some files on the USB device are not  
displayed.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the Micro HiFi  
System and yourTV orVCR.  
Radio reception is poor.  
The system does not react when buttons  
are pressed.  
Remove and reconnect the AC power plug and  
switch on the system again.  
Sound cannot be heard or is of poor  
quality.  
Adjust the volume.  
Disconnect the headphones.  
Check that the speakers are connected correctly.  
Check if the stripped speaker wire is clamped.  
Make sure the MP3-CD was recorded within  
32~256 kbps bit rate with sampling frequencies  
at 48 kHz, 44.1 kHz or 32 kHz.  
The left and right sound outputs are  
reversed.  
Check the speaker connections and location.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The remote control does not function  
properly.  
Select the source (CD orTUNER, for example)  
before pressing the function button (ÉÅ,í,  
ë).  
Reduce the distance between the remote  
control and the system.  
Insert the battery with its polarities  
(+/– signs) aligned as indicated.  
Replace the battery.  
Point the remote control directly toward  
IR sensor on the front of the system.  
The timer is not working.  
Check the set is switched off  
Set the clock correctly.  
PressTIMER to switch on the timer.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock/timer.  
The Clock/Timer setting is erased.  
The buttons on MCM276R and its remote  
control can control playback of audio contents  
only.To navigate the menu, use the controls on  
the docked player.  
The menu navigation or photo playback  
of the docked player cannot be carried  
out through the buttons on MCM276R or  
its remote control.  
The playback of the docked player cannot be  
stopped using the STOP 9 button on  
MCM276R and its remote control.  
The STOP 9 and some buttons on  
MCM276R and its remote control have  
no function.  
The buttons ( 2; , ¡1, 2™ and VOLUME )  
function only.  
The docked GoGear is still comsuming battery.  
Power it off if you don’t use the player.  
The battery of my Philips GoGear in  
dock is drained when it is not used for  
playback.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Mounting your MCM276R  
How to mount your MCM276R  
onto walls  
1 Align the template in the chosen location on a  
wall. Use a pencil to mark the drilling positions  
(as shown)  
IMPORTANT!  
– The wall mounting instructions are for  
the use of the qualified wall mounting  
person only!  
140 mm (5.51")  
– Ask a qualified person to help you  
with the wall mounting, which includes  
drilling holes on the wall and  
mounting the set onto walls.  
2 Drill two 6mm diameter holes as marked  
3 Secure the dowels and screws in the holes  
respectively, leaving the screws 5mm proud of  
the wall  
What’s in the supplied mounting kits  
140 mm (5.51")  
1 x template (Wall  
mounting  
instructions)  
2 x screws  
What else you’ll need  
4 To detach the stand,  
a. As shown, hold down the 3PRESS buttons  
b. Move out the stand to detach  
– Drilling tools (e.g. electric drill)  
Preparation  
P R E S S  
P
1 To find a suitable location for mounting, try  
your necessary rear connections (see  
the chapter Installation).  
2 Ask a qualified person to help you with the  
wall mounting, who should:  
5 Hang the unit on the fastening screws  
– to avoid unexpected damage, learn about the  
piping, wiring and other relevant information  
inside your walls;  
6 As shown, hook and mount the speakers in  
place  
– according to the drilling requirements, choose  
suitable drilling tools;  
er Left  
Speak  
– take other precautions necessary for the wall  
mounting work.  
ain unit  
M
ight  
R
er  
Speak  
oles  
H
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes for iPod connection  
1. The docking entertainment system is compatible with all the existing Apple iPod models with 30-pin  
connector.  
2. Four adaptors are included to fit different iPod models including iPod touch (8GB, 16GB), iPod  
classic (80GB, 160GB), iPod nano 3rd generation (4GB, 8GB), iPod the 5th generation (30GB, 60GB,  
80GB), iPod nano 2nd generation (2GB, 4GB, 8GB) and iPod nano 1st generation (1GB, 2GB, 4GB ).  
Remarques relatives à la connexion d'un iPod  
1. La station d'accueil pour baladeur est compatible avec tous les modèles d'iPod Apple existants avec  
connecteur 30 broches.  
2. Inclus: quatre adaptateurs pour les différents modèles d'iPod, notamment iPod touch (8 Go, 16 Go),  
iPod classic (80 Go, 160 Go), iPod nano 3ème génération (4 Go, 8 Go), iPod 5ème génération (30  
Go, 60 Go, 80 Go), iPod nano 2ème génération (2 Go, 4 Go, 8 Go) et iPod nano 1ère génération (1  
Go, 2 Go, 4 Go).  
Notas acerca de la conexión del iPod  
1. El sistema de base de entretenimiento es compatible con todos los modelos existentes de iPod de  
Apple que tengan conectores de 30 patillas.  
2. Se incluyen cuatro adaptadores para que encajen los diferentes modelos de iPod, incluidos el iPod  
touch (8 GB, 16 GB), iPod classic (80 GB, 160 GB), iPod nano de tercera generación (4 GB, 8 GB),  
iPod de quinta generación (30 GB, 60 GB, 80 GB), iPod nano de segunda generación (2 GB, 4 GB, 8  
GB) y iPod nano de primera generación (1 GB, 2 GB, 4 GB).  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Stereo Amplifier UA 12 User Manual
Philips Cell Phone CTX600GRY User Manual
Philips Digital Photo Frame 7FF1B207 User Manual
Philips DVD Player MDV411SL User Manual
Philips Microphone SBCMD150 User Manual
Philips Speaker System BTM177 User Manual
Pioneer DVD Player DV 343 User Manual
PLUS Vision Projector V 1100Z User Manual
Polk Audio Speaker ATRIUM45 User Manual
PYLE Audio Music Mixer PCM20A User Manual