MDV450 25/09/2002 9:46 AM Page 1
OWNER’S MANUAL
MDV450 DVD PLAYER
READ THIS MANUAL FIRST!
CONGRATULATIONS ON PURCHASING THIS PRODUCT.WE’VE INCLUDED
EVERYTHING YOU NEED TO GET STARTED. IF YOU HAVE ANY PROBLEMS,
OUR REPRESENTATIVES CAN HELP YOU GET THE MOST FROM YOUR NEW
PRODUCT BY EXPLAINING:
• HOOKUPS • FIRST TIME SETUP • FEATURE OPERATION
DO NOT ATTEMPT TO RETURN THIS PRODUCT TO THE STORE.
FOR FAST HELP, CALL US FIRST!
1-800-705-2000
THANK YOU FOR MAKING US A PART OF YOUR HOME!-
IMPORTANT!
RETURN YOUR WARRANTY REGISTRATION CARD WITHIN 10 DAYS.
SEE WHY INSIDE.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 3
Contents 3
Getting Started
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14
Quick Disc Playback
Quick Disc Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
DVD Player Controls
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Disc Playback and Features
Title/Disc Menus, Chapter/Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Slow Motion, Fast Forward and Fast Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Still Picture/Frame-by-Frame Playback,Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Zoom, Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Repeat, Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
DVD Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DVD Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
DVD Disc Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Parental Controls Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Parental Controls Disc Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Parental Controls Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Smart Navigator, JPEG and MP3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
DVD Player Setup Options
TV Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Video Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Video Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35
TV Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Speaker Setup, 3D Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
SPDIF, LPCM 96K Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
DVD Player On-Screen Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Display Dim, Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
DVD Player Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
InformationYou May Need
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47
Information Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 4
4 Safety Information
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
Federal Communications Commission (FCC)Warning: Any unauthorized changes
or modifications to this equipment void the user’s authority to operate it.
Laser Safety
This unit employs a laser. Only a qualified service person should remove the cover or attempt to
service this device, due to possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHERTHANTHOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:VISIBLE AND INVISIBLE LASER RADIATIONWHEN OPEN AND
INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.THE BEAM IS LOCATED INSIDE, NEAR
THE DECK MECHANISM.
Special Information for Canadian Users
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio/TV Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and the receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Copyright Protection
Unauthorized copying, broadcasting, public performance and lending of Discs are
prohibited.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Declaration of Conformity
Model Number:
Trade Name:
Responsible Party:
MDV450
Magnavox
Philips Consumer Electronics
P.O. Box 14810
Knoxville,TN 37914-1810
(865) 521-4316
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories.
Copyright 2002 Magnavox All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 5
Safety Information (cont’d) 5
IMPORTANT SAFETY INSTRUCTIONS
16. Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits.When installing an outside antenna
system, take extreme care to keep it from touching such
power lines or circuits; contact with them might be fatal.
1. Read instructions. Read all the safety and operating
instructions before operating the product.
2. Retain instructions. Keep the safety and operating
instructions for future reference.
3. Heed warnings.Adhere to all warnings on the product and in 17. Overloading – Do not overload wall outlets, extension
the operating instructions.
cords, or integral convenience receptacles.This can result in
a risk of fire or electric shock.
18. Object and Liquid Entry – Never push objects of any kind
into this product through openings; they may touch
dangerous voltage points or short out parts, resulting in a
fire or electric shock. Never spill liquid of any kind on the
product.
19. Servicing – Do not attempt to service this product yourself.
Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
20. Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
4. Follow instructions. Follow all operating and use instructions.
5. Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
6. Attachments – Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Water and Moisture – Do not use this product near water -
for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, near a swimming pool, etc.
8. Accessories – Do not place this product on an unstable cart,
stand, tripod, bracket, or table.The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product.Any mounting of the product should follow the
manufacturer’s instructions and should use a mounting
accessory recommended by the manufacturer.
a) When the power supply cord or plug is damaged,
b) If liquid has spilled or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions.Adjust only those controls covered by
the operating instructions.An improper adjustment of other
controls may result in damage and will often require
extensive work by a qualified technician to restore the
product to its normal operation,
9. Move a product and cart combination with care. Quick
stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
10. Ventilation – Slots and openings in the cabinet
provide ventilation, ensure reliable operation of the
product, and protect it from overheating. Do not block or
cover these openings.The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface. Do not place this product in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
e) If the product has been dropped or damaged in any way,
f) When the product exhibits a distinct change in
performance.This indicates a need for service.
21. Replacement Parts – When replacement parts are required,
be sure the service technician uses replacement parts
specified by the manufacturer or having the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
22. Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
11. Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12. Grounding or Polarization – This product may be equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other).This plug will fit into the
power outlet only one way.This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug still fails to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13. Power-Cord Protection – Route power supply cords so they
are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit
from the product.
23. Wall or Ceiling Mounting – Mount the product to a wall or
ceiling only as recommended by the manufacturer.
24. Heat - Situate this product away from heat sources, such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
25. Battery usage CAUTION - To prevent battery leakage that
may result in bodily injury or damage to the unit:
• Install all batteries correctly, with + and - aligned as marked
on the unit.
• Do not mix batteries (old/new, carbon/alkaline, etc.).
• Remove batteries when the unit is not used for a long
time.
14. Outdoor Antenna Grounding – If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
See figure at right.
Example of Antenna Grounding
per National Electrical Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
15. Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system.This will prevent
damage to the product due to lightning and power-line
surges.
GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
ELECTRIC SERVICE EQUIPMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 6
6 Introduction
Welcome!
This DigitalVideo Disc Player will allow you to enjoy better picture quality, clearer sound, and endless
playback features on DigitalVideo Discs (DVDs). Expanding technology allows you to add options to your
viewing - watch a director’s cut of a movie, listen to the producer’s comments, or play your favorite scene
repeatedly. Hear a movie in different languages, or listen only to the soundtrack.The possibilities are limited
only by your choices and the materials available on the DVD.
Of course, you can listen to your favorite Audio Compact Discs (CDs) on this DVD Player, too. Determine
the order in which you want to hear the songs, or play the Disc repeatedly - all while seeing the status of
the Audio CD on your television.
We hope you enjoy this DVD Player and learn to use its features.To get the most from the DVD Player,
read this manual carefully. It will describe how you can access these features.
Features
G Preview
G Language options for Audio, Subtitles, and
G Repeat and Repeat A-B Playback
Menus
G Screen Saver
G Smart Picture
G MP3 and JPEG File Playback
G Parental Controls
G Paused/Fast/Slow/Step-by-Step/Zoomed
Playback
G Programmed Playback
Package Contents
G DVD Player
G Remote control with two AA batteries
G One audio cable (red and white)
G One video cable (yellow)
G This owner’s manual and registration materials
Environmental Information
Your system has materials that can be recycled and reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old
equipment.
Safety Information
G Do not expose the system to excessive moisture, rain, sand, heat, or humidity.
G Place the DVD Player on a firm, flat surface.
G Keep the DVD Player away from domestic heating equipment and direct sunlight.
G When placing the DVD Player in a cabinet, allow about one inch of space all around the DVD Player for
ventilation. Leave enough room in front of the DVD Player for the disc tray to open completely.
G If the DVD Player is brought directly from a cold to a warm location, or is placed in a very damp room,
moisture may condense on the lens inside the DVD Player. If this occurs, the DVD Player will not
operate normally. Leave the power on for about one hour with no disc in the DVD Player until normal
playback is possible.
G The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated.
G When the DVD Player is turned off, it is still consuming some power.To disconnect the system from
the power supply completely, remove the AC power plug from the wall socket.
G Always keep the tray closed to avoid dust on the lens.
Cleaning Discs
G When a Disc becomes dirty, clean it with a cleaning cloth.Wipe the Disc from the center out, in a
straight line. Do not wipe the Disc in a circular pattern.
G Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray
intended for analog discs.
Manufactured under license from Dolby Laboratories.“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright 1992-1999 Dolby Laboratories.All rights reserved.
Copyright 2002 Philips Consumer Electronics.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 7
Playable Discs 7
Playable Discs
This DVD Player will play various types of Discs. Look for these logos on your Discs to determine
whether the Disc will play on the Philips DVD Player.
DVD
(DigitalVideo Disc)
Audio CD
(Compact Disc Digital Audio)
Video CD
SuperVideo CD
CD-R (CD-Recordable)
Recordable
CD-RW (CD-Rewritable)
ReWritable
Region Codes and Color Systems
DVDs must meet the requirements for Region Codes and Color Systems before you can use them
with the DVD Player. DVDs must be labeled for ALL regions or for Region 1 in order to play on this
DVD Player.You cannot play Discs that are labeled for other regions.These symbols must appear on
your DVDs, or you cannot play the DVD in this DVD Player.
The number inside the globe refers to a region of the world. Region 1 represents the United States,
Canada, upper regions of North America, Bermuda, the U.S.Virgin Islands, and small regions near
Australia.
Furthermore, recordings are made according to different color systems throughout the world.The
most common color systems are NTSC, which is used primarily in the United States and North
America, PAL, and SECAM.
This DVD Player is compatible with NTSC and PAL. Make sure the Discs you play were recorded in
NTSC or PAL and your TV is NTSC or PAL compatible.You must set the DVD Player’s TV TYPE to be
compatible with your TV and the Disc. Details are on page 36. The color system of the DVD may appear
on the DVD or on the Disc case.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 8
8 General Information
Battery Installation
-
Remove the battery compartment lid on the rear of the
remote control by pressing in the tab, then lifting off the lid.
+
1
2
Place two AA batteries inside the battery compartment
with their and ends aligned as indicated. Do not mix old
+
–
+
-
and new batteries or different types of batteries (standard, alkaline,
etc.).
Replace the battery compartment lid.
3
Using the Remote Control
Unless stated otherwise, the remote control can operate all the features of
the DVD Player.Always point the remote control directly at the front of the
DVD Player, not the TV. Make sure there are no barriers between the
remote control and the DVD Player.
When referring to this manual, remember...
The feature is available on some DigitalVideo Discs.
DVD
The feature is available on some Audio Compact Discs.
AUDIO CD
VIDEO CD
The feature is available on someVideo Compact Discs or
SuperVideo CDs.
DVD Disc Menus...
Some explanations in this manual describe the DVD Disc Menus, which vary
among DVDs. Movie producers set these menus, and not all DVDs have
menus. If the DVD has a menu, access the Disc Menu by pressing the DISC
MENU button on the remote control. Details are on page 19.
DVD Player Menus...
Some instructions explain how to use the DVD Player’s Setup menu to set
up features of the DVD Player or the Disc.You get to the Setup Menu by
pressing SYSTEM MENU on the remote control. Even if a feature is set up
in the DVD Player’s menu, it will not be available if the current Disc does
not include that feature.
To adjust features in the DVD Player’s Setup Menu, see pages 24-30 and 32-41.
Available Disc Features...
Features in this manual may not be available on every Disc. If the
feature is not available, you cannot use the DVD Player to make the
feature available.A stop hand will appear in the top left corner of
the TV screen if you try to access a feature that is not available on
the current Disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 9
Hookups 9
Determining the best possible connection...
The capabilities of your existing equipment, especially your TV, will determine your connection possibilities.
However, the following guidelines describe which options provide the best picture and sound quality.
૽૽૽૽
૽૽૽
૽૽
ComponentVideo provides the best picture quality. Details are on page 12.
S-Video provides excellent picture quality. Details are on page 11.
CompositeVideo (a yellowVideo jack) provides good picture quality. Details are on page 10.
YourTV may have only an RF-style jack, usually labeled Antenna In or 75 ohm or
RF In.You will need an RF modulator in order to view the DVD Player at yourTV.
See your electronics retailer for details on RF modulator availability and
operations.
૽૽
૽૽૽૽
૽૽૽
Digital audio connections provide the clearest sound, but you must have a digital stereo
receiver. Connect either the DVD Player’s COAXIAL or OPTICAL digital audio out jack to
your Stereo for the best sound quality. Details are on page 14.
If digital connections are not possible, connect the DVD Player’s red and white AUDIO OUT
jacks to the Audio In jacks of your Stereo or TV. Details are on pages 10-13.
Before you begin...
G
Refer to the manuals of your TV, Stereo, or other equipment as necessary. Note the style of jacks and
connectors on the other equipment. Determine how to choose different Audio andVideo In channels
on your other equipment so you can see and hear the DVD Player on the TV, Stereo, etc.
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only
after you have finished hooking up everything. Never make or change connections with equipment
connected to the power outlet.
G
Remember...
G
Connect the DVD Player directly to the TV. For example, do not connect the DVD Player to aVCR,
then connect theVCR to a TV.This type of connection may distort the picture and sound.Also, your
VCR might have the copy protection system, which could distort the DVD image or prevent playback
of some Discs.
G
Set the TV to the correctVideo In channel. Such channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1 or EXT2 or External In, etc.These channels are often near channel
00. See your TV manual for details. Or, change TV channels until you see the DVD screen saver on the
TV.
G
G
G
Set the Stereo to the correct channel or “source” mode.
Do not connect the DVD Player’s AUDIO OUT jacks to the PHONO IN jack of your Stereo.
You only need one audio connection and one video connection between the DVD Player and your TV
and/or Stereo. So, you might not use all the jacks on the DVD Player.
Once you determine the best option, find your choice on pages 10-14. Follow the
steps for the hookup you choose.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 10
10 Hookups (cont’d)
Connecting to aTV Only
TV has a yellow CVBS Video In jack
Back of TV
(example only)
2
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
RIGHT AUDIO IN
3
LEFT AUDIO IN
VIDEO IN
1
Connect the yellowVIDEO (VIDEO OUT) jack of the DVD
Player to the corresponding VIDEO IN jack on yourTV. Use
the supplied video cable.
1
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on theTV. Match the cable
colors to the jack colors.
Plug the power cords of the DVD Player and theTV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
3
4
Turn on theTV power. Set theTV to the correctVideo In
channel. See your TV owner’s manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
Helpful Hint
• On theTV, theVideo In jack is
usually yellow and might be
labeled video, CVBS, composite,
or baseband.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 11
Hookups (cont’d) 11
Connecting to aTV Only
TV has an S-Video In Jack
Back of TV
(example only)
2
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
3
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to theTV’s
S-VIDEO In jack.
1
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on theTV. Match the cable
colors to the jack colors.
Plug the power cords of the DVD Player and theTV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
3
4
Turn on theTV power. Set theTV to the correct S-Video In
channel. See your TV owner’s manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
Helpful Hints
• On theTV, the S-Video In jack
may be labeledY/C, S-Video, or
S-VHS (super video).
• If yourTV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a “splitter” audio
cable to go from the left/right
AUDIO OUT jacks of the DVD
Player to the single Audio In
jack on yourTV. See your
electronics retailer for details.
• SetVIDEO OUTPUT to S-
VIDEO. Details are on page 34.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 12
12 Hookups (cont’d)
Connecting to aTV Only
TV has Component Video In Jacks (red, green, and blue)
Back of TV
(example only)
2
RIGHT AUDIO IN
LEFT AUDIO IN
Pr/Cr
Pb/Cb
Y
RIGHT AUDIO IN
LEFT AUDIO IN
Pr/Cr
Pb/Cb
Y
3
1
Connect the DVD Player’s Y CB CR (VIDEO OUT) jacks to
the corresponding COMPONENT VIDEO IN jacks on the
TV. Use component video cable (not supplied).
1
2
Connect the DVD Player’s red and white AUDIO OUT (left
and right) jacks to the left/right AUDIO IN jacks on theTV.
Use the supplied audio cables. Match the cable colors to the jack
colors.
Plug the power cords of the DVD Player and theTV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
3
4
Turn on theTV power. Set theTV to the correct
ComponentVideo In channel. See your TV owner’s manual for
details. Or, change channels at the TV until you see the DVD screen
saver on the TV.
Helpful Hint
On theTV, the component video
in jacks may be labeledYUV or
Pr/Cr Pb/CbY and may be
green, blue, and red.
•
• SetVIDEO OUTPUT toYCBCR.
Details are on page 34.
• If yourTV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a “splitter” audio
cable to go from the left/right
AUDIO OUT jacks of the DVD
Player to the single Audio In
jack on yourTV. See your
electronics retailer for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 13
Hookups (cont’d) 13
Connecting to aTV and a two-channel Stereo
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV
(example only)
Stereo
(example only)
2
V
I
D
E
O
I
N
3
RIGHT AUDIO IN
VIDEO IN
LEFT AUDIO IN
1
Connect the supplied video cable to the yellowVIDEO
(VIDEO OUT) jack of the DVD Player and to theTV’s
VIDEO IN jack.
1
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the Stereo. Match the
cable colors to the jack colors.
Plug the power cords of the DVD Player, Stereo, and theTV
into an active power outlet. Press the POWER ON/OFF
button on the front of the DVD Player to turn on the DVD
Player.
3
Turn on the Stereo power and set your Stereo to the
correct Audio In channel or sound source. Refer to the Stereo
owner’s manual for details.
4
5
Turn on theTV power. Set theTV to the correctVideo In
channel. See your TV owner’s manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
Helpful Hint
• If you prefer or need to use the
S-VIDEO orY CB CR jacks
instead, see pages 11-12.You
only need one video connection
between theTV and the DVD
Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 14
14 Hookups (cont’d)
Connecting to aTV and a Stereo Receiver
TM
(Receiver has Dolby Digital or MPEG2)
Stereo Receiver
(example only)
Back of TV
(example only)
V
I
D
E
O
I
N
1
3
COAXIAL DIGITAL
AUDIO IN
VIDEO IN
2
Connect either the COAXIAL or OPTICAL jack of the
DVD Player to the corresponding DIGITAL AUDIO IN jack
on your Stereo. You only need one connection. Use an
appropriate digital audio cable (not supplied). See your electronics
retailer for details and availability.
1
Connect the supplied video cable to the yellowVIDEO
(VIDEO OUT) jack of the DVD Player and to theTV’s
VIDEO IN jack.
2
3
Plug the power cords of the DVD Player, Stereo, and theTV
into an active power outlet. Press the POWER ON/OFF
button on the front of the DVD Player to turn on the DVD
Player.
Turn on the Stereo power and set your Stereo to the
correct Audio In channel or sound source. Refer to the Stereo
owner’s manual for details.
Helpful Hints
4
5
• Set SPDIF OUT accordingly.
Details are on page 38.
Turn on theTV power. Set theTV to the correctVideo In
channel. See your TV owner’s manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
• Your Stereo must support
TM
MPEG2 or Dolby Digital .
Check the Stereo’s manual.
• If you prefer or need to use the
S-VIDEO orY CB CR jacks
instead, see pages 11-12.
• A small, square, black cap
protects the OPTICAL jack
when it is not in use. Remove
the cap if you want to use the
jack; replace the cap when the
jack is not in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 15
Quick Disc Playback 15
AUDIO CD VIDEO CD
DVD
2,3
There are many playback features and options available on Discs.After
familiarizing yourself with the DVD Player as described on pages 16-18, see
pages 19 and following to try additional playback features.
Press the POWER button to turn on the DVD Player.
Turn on yourTV. Set it to the correctVideo In channel. You
1
should see the DVD screen saver on the TV (if no Disc is in the
Player).
1
Press OPEN/CLOSE / on the front of the DVD Player to open
the disc tray.
2
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the label of the side you want to play
is facing up.
5
4
4
Press OPEN/CLOSE / again to close the tray.
3
Playback may start automatically. If not:
• If you are playing a DVD, a Disc menu may appear. If the Title or
4
Chapter selections are numbered, press a Number button to select
an item. Or, press 341 2 to select an item, then press OK. Playback
will begin. Or, follow the on-screen instructions as detailed in the
DVD Disc menu.
• If you are playing an Audio CD, press PLAY 3 to start playback.
• If you are playing aVideo CD that has Playback Control, press the
DISC MENU button to access the menu or index of theVideo CD.
Press the Previous 4, Next ¢, 3, 4, 1, 2, or Number buttons
to select an item, then press OK. Follow the instructions provided
by theVideo CD. Not allVideo CDs have Playback Control. See the
Disc case or menus for details.
Helpful Hints
• If the Disc is locked by Parental
Controls, you must enter your
password or unlock the Disc.
Details are on pages 27-29.
• DVDs have a region code.Your
Player will not play Discs that
have a region code different from
the region code of your Player.
The Player’s region code is 1
(one). Details are on page 7.
• Opening the disc tray or turning
off the DVD Player’s power may
cancel the Resume feature.
To stop playback at any time, press STOP 7.
If you press STOP 7 only once, playback will resume at the same
5
point if you press PLAY 3 later to restart playback.This is known as
the Resume feature.
If you press STOP 7 more than once to stop playback, play will start
at the beginning of the Disc again if you press PLAY 3later to
restart playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 16
16 Remote Control Buttons
Number Buttons
Press to select numbered items in a
menu. During playback, press the
Number buttons to select a Chapter
(within the currentTitle) orTrack for
playback, then press OK.
POWER 2 Button
Press to turn on or off the power of
the DVD Player.
DISPLAY Button
Press during playback to see current
disc information on theTV screen.
Details are on pages 19, 21, and 37.
Details are on page 19.
Press and hold the Number 1 button
for three seconds (or until OPEN or
CLOSE appears on the display panel)
to open or close the disc tray.
SYSTEM MENU Button
Press to access or remove the Setup
Menu of the DVD Player.
RETURN/TITLE Button
Press to go back to a previous menu.
Press during DVD playback to return
to the Disc’sTitle menu.This option
varies among DVDs and may not be
available with all Discs.
341 2Buttons
Press to select items in a menu. Press
1or 2for fast reverse or fast forward
searching. Details are on page 20.
Press 3or 4during DVD playback for
forward or reverse slow motion
playback. Details are on page 20.
DISC MENU Button
Press during playback to access a
DVD’s menu.
OK Button
Press to acknowledge or approve a
menu selection.
Details are on page 19.
Previous 4 Button
Press to go to the previous Chapter
orTrack. Details are on page 19.
Next ¢ Button
Press to skip to the next Chapter or
Track. Details are on page 19.
STOP 7 Button
Press to stop Disc playback.
PAUSE 8 Button
Press once to pause playback. Press
repeatedly to advance a paused picture
one frame at a time (frame-by-frame
playback). Details are on page 21.
PLAY 3Button
Press to begin Disc playback.
SUBTITLE Button
Press repeatedly during playback to
select a subtitle language from those
available on the current Disc.
Details are on page 25.
AUDIO Button
Press to select a different audio
language or soundtrack during DVD
playback. Multiple languages or
soundtracks must be available on the
DVD. Details are on page 24.
With someVideo CDs and Audio
CDs, press the AUDIO button
repeatedly to choose an audio channel.
Details are on page 24.
REPEAT Button
Press repeatedly to play a Chapter,
Title,Track, or Disc repeatedly.
Details are on page 23.
REPEAT A-B Button
Press to set up Repeat A-B playback, in
which a certain segment of theTrack
or Chapter plays repeatedly. Details are
on page 23.
MUTE Button
Press to silence the volume. Press
again to restore the volume. Point the
remote control at the DVD Player, not
yourTV.
ANGLE Button
Press to select a different camera
angle during DVD playback. Multiple
angles must be available on the Disc.
Details are on page 22.
ZOOM Button
Press to enlarge the picture during
playback. Details are on page 22.
PREVIEW Button
Press to enter the Preview menu for a
Video CD or SuperVideo CD.
Details are on page 31.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 17
Front Panel 17
POWER
Press to turn the DVD Player on or off.The button is depressed when
the power is on.The button is released when the power is off.
PICTURE
Press repeatedly to choose Picture settings.You may choose BRIGHT,
STANDARD, SOFT, or PERSONAL. Details are on pages 34-35.
DiscTray
Insert a Disc here. Load the Disc with the label facing up.
Details are on page 15.
OPEN/CLOSE / button
Press to open or close the Disc
tray.You also can open or close the
disc tray by pressing and holding
the Number 1 button on the
remote control for three seconds.
Display
Current Disc information appears here, including
elapsed playing time, current Track number, or active
feature (NEXT when you move to the next Chapter,
RPT ALL when playing a Disc repeatedly, etc.).
PREV (ious) 4 button
Press to return to previous Chapters or Tracks.
Details are on page 19.
NEXT ¢ button
Press to select the next Chapter or Track.
Details are on page 19.
STOP 7 button
Press once to stop Disc playback. Play will resume from the same point
the next time you start playback. Or press STOP 7 twice to stop Disc
playback. Play will resume from the beginning of the Disc the next time
you start playback.You must stop playback by pressing STOP 7 twice in
order to access PREFERENCES in the DVD Player’s Setup menu.
PLAY/PAUSE 38 button
Press to start playing a Disc. Press once during playback to pause
play; press again to resume play from the same point.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 18
18 Rear Panel
AUDIO OUT (left/right) jacks
Connect the supplied audio cables here and to
the AUDIO IN jacks on yourTV or Stereo.
Details are on pages 10-13.
AC Power cord
Connect to a standard AC power outlet
after completing all other connections.
VIDEO (VIDEO OUT) jack
Connect the supplied video cable here and to theTV’s
Video In jack. Details are on page 10.
Y CB CR (VIDEO OUT) jacks
Connect component video cables (not supplied)
here and to the ComponentVideo In jacks of a TV.
Details are on page 12.
S-VIDEO (VIDEO OUT) jack
Use an S-video cable (not supplied) to
connect this jack to the S-Video In jack
of yourTV. Details are on page 11.
OPTICAL jack
Connect a digital audio optical cable (not supplied)
here and to the Digital Audio Optical In jack of a
Stereo. Details are on page 14. Replace the OPTICAL
jack cap when the jack is not in use.
COAXIAL jack
Connect a digital audio coaxial cable (not
supplied) here and to the Digital Audio Coaxial In
jack of a Stereo. Details are on page 14.
Helpful Hint
• You only need one audio and one
video connection, so you will not
use all the jacks on the DVD
Player.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 19
Title/Disc Menus, Chapter/Track Selection 19
DVD
Title/Disc menus
Press DISC MENU during DVD playback.
The main Disc menu (or Root menu) will appear.The menu may list
camera angles, spoken language and subtitle options, and Chapters
for the Title.
Or, if the currentTitle has a specificTitle menu, press the
RETURN/TITLE button to access theTitle menu. Title menus
are not available on all Discs.
1
1
1
Press 341 2 to select items in the menu, then press OK.
Continue until you set up all the features you want or until playback
begins. If Chapters or options are numbered, press the appropriate
Number button to select the item. Some DVDs may not allow you
to operate the Disc menu this way. Follow the instructions on the
Disc.
2
2
DVD
VIDEO CD
AUDIO CD
Chapter/Track Selection
B,C
Press Next ¢ during playback to go to the next
Track/Chapter. Press Previous 4 to go to previous
A
B
C
A
Tracks/Chapters.
To go directly to anyTrack/Chapter during playback, press
the Number buttons to enter theTrack/Chapter number,
then press OK. Play will resume from the beginning of the
Track/Chapter you selected.
If you enter an invalid number, the
corner of the TV screen.The current Track/Chapter will continue to
play. Or, an incorrect Track/Chapter may begin to play. Make sure the
Track/Chapter number you enter is available on the Disc. Make sure
a Chapter is available within the current Title.
B,C
may appear in the top left
You also can select a Track,Title, or Chapter by pressing the
DISPLAY button during playback. Press DISPLAY, then press 2
to select the area besideT (Title orTrack) or C (Chapter).
Press the Number buttons to enter theTrack,Title, or
Chapter number you want, then press OK. Play will resume at
the beginning of the Track,Title, or Chapter you selected. Press
DISPLAY again to remove the information from the top of the
screen.
C
A
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 20
20 Slow Motion, Fast Forward and Fast Reverse
VIDEO CD
DVD
Slow Motion
During Disc playback, press 3repeatedly to play the disc at
1/2, 1/4, 1/6, or 1/8 the normal speed. SF 2X, SF 4X, SF 6X, or SF
8X will appear on the TV screen. SF represents Slow Forward.The
sound will be mute during slow motion playback.
Or, press 4 repeatedly to play a DVD backward at 1/2, 1/4, or 1/8
the normal speed. SR 2X, SR 4X, or SR 8X will appear on the TV
screen. SR represents Slow Reverse. Slow reverse is not possible on
Video CDs.
1
2
1
1
To return to normal playback, press PLAY 3.
2
DVD
AUDIO CD
VIDEO CD
Fast Forward and Fast Reverse
To fast forward a DVD orVideo CD at twice the normal
playback speed, press 2. Press 2repeatedly to fast forward the
1
DVD orVideo CD at four, six, or eight times the normal playback
speed. FF 2X, FF 4X, FF 6X, or FF 8X will appear on the TV screen.
FF represents Fast Forward. Sound will be mute.
Or, press 1to play the DVD orVideo CD backward at twice
the normal speed. Press 1repeatedly to fast reverse the DVD or
Video CD at four, six, or eight times the normal playback speed. FR
2X, FR 4X, FR 6X, or FR 8X will appear on the TV screen. FR
represents Fast Reverse.The sound will be mute.
1
1
To fast forward an Audio CD at twice, four, six, or eight times
the normal playback speed, press 2during playback. Sound will be
intermittent and FF 2X, FF 4X, FF 6X, or FF 8X will appear on the
TV screen. FF represents Fast Forward.There will be no sound at FF
8X.
To fast reverse an Audio CD at twice, four, or six times the
normal speed, press 1repeatedly. Sound will be intermittent and FR
2X, FR 4X, or FR 6X will appear on the TV screen. FR represents
Fast Reverse. (You can not reverse an Audio CD at eight times the
regular playback speed.)
When you reach the beginning of a Track during Fast Reverse,
normal playback resumes automatically.You can not use Fast Reverse
to go to previous Tracks.
2
To return to normal playback speed, press PLAY 3.
2
Helpful Hint
• DVDs can play at SF 2X, SF 4X,
or SF 8X.Video CDs can play at
SF 2X, SF 4X, or SF 6X.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 21
Still Picture/Frame-by-Frame Playback,Time Search 21
VIDEO CD
DVD
Still Picture/Frame-by-Frame Playback
To pause a DVD orVideo CD picture, press PAUSE 8 on
the remote control during playback.
1
Press PAUSE 8 repeatedly to advance the still picture one
frame at a time.
2
Press PLAY 3 to resume regular playback.
3
1,2
3
VIDEO CD AUDIO CD
DVD
Time Search
3
1,
4
2
Press the DISPLAY button during playback. Current playback
information will appear at the top of the screen.
1
2
3
4
T:
1 / 3
C: 12 / 30
3D OFF
TC: 00:37:58
3
DVD example
Press 2repeatedly to select the counter numbers beside
TC. This shows the amount of time that the Disc or Track has been
playing, or the elapsed playing time.
T:
1 / 3
C: 12 / 30
3D OFF
TC: 00:37:58
Helpful Hint
Press the Number buttons to enter the elapsed playing time
at which you want to resume playback, then press OK.
Enter the elapsed playing time in hours, minutes, and seconds.
For example, if the current DVD is a two-hour movie and you want
to jump to the middle of the movie, press 0,1,0,0,0,0, then press OK.
The movie will resume playing at an hour into the movie.
• When you press DISPLAY, the counter will appear in
the Information box at the top of the screen.TC
usually appears beside the counter.You can change
the counter type by pressing 1or 2to chooseTC,
then pressing 3or 4to choose CC, CR,TC, DC, DR,
orTR.The counter will change to represent:
CC - elapsed playing time of current Chapter;
CR - remaining playing time of current Chapter;
TC - elapsed playing time of currentTitle orTrack;
TR - remaining playing time of currentTitle orTrack;
DC - elapsed playing time of current Disc; or
DR - remaining playing time of current Disc.
The counters will be available according to the type of
Disc in the DVD Player.
Press DISPLAY to remove the information from the top of
the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 22
22 Zoom, Camera Angle
VIDEO CD
DVD
Zoom
Zooming lets you enlarge the video image during playback and scan through
the enlarged image.
Press ZOOM repeatedly during Disc playback to choose
ZOOM X2 or ZOOM X4. ZOOM X2 or Z00M X4 will appear in
1
the top left corner of the TV screen briefly.The picture will be twice
(ZOOM X2) or four (ZOOM X4) times as large.
2
To shift the enlarged picture on theTV screen, press 3 4 1
or 1, whichever is appropriate for the direction in which you want
2
3
to move the picture.
To return the picture to regular size, press the ZOOM
button so that ZOOM OFF appears briefly in the top left
corner of theTV screen.
1,3
DVD
Camera Angle
Some DVDs include scenes recorded from different angles.To watch
segments from a different angle, follow these steps.The DVD must have
multiple angles available. Check the DVD Disc case or Disc menu for
details and availability.
During DVD playback, press the ANGLE button repeatedly
to select a different angle.
1
2
In a few seconds, playback changes to the selected angle.
1
Helpful Hints
• Zooming may not be possible
on all DVDs.
• Zooming is not available on
DVDs that have the PAL color
system. Details are on page 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 23
Repeat, Repeat A-B 23
VIDEO CD AUDIO CD
DVD
Repeat
You may play a Chapter,Track,Title or entire Disc repeatedly.
During Disc playback, press REPEAT repeatedly to choose a
Repeat option. Depending on the type of Disc, you may choose to
1
play the Chapter (CHAPTER REPEAT ON),Track (REP-ONE),Title
(TITLE REPEAT ON), or Disc (REP-ALL) repeatedly.
To cancel repeat playback, repeatedly press REPEAT until
REPEAT OFF appears in the top left corner of the TV screen.
2
1,2
VIDEO CD AUDIO CD
DVD
Repeat A-B
You also may set the DVD Player to play only a specific portion of a Title,
Chapter, or Track repeatedly. Follow these steps.
Press PLAY 3 to start Disc playback.
1
When the Disc reaches the point at which you want
repeated playback to begin, press REPEAT A-B. “A-B SET
2
A” or “A TO B SET A” will appear in the top left corner of the TV
screen.
When the Disc reaches the point at which you want to end
1
the segment, press REPEAT A-B again.“A-B SET B” or “A TO
3
B SET B” will appear in the top left corner of the TV screen.The
segment will begin playing repeatedly.
On a DVD, make sure the entire A-B segment is within a single Title.
On aVideo CD or Audio CD, the A-B segment should be within a
single Track. If you do not enter the B setting before the end of the
Track is reached,“A TO B CANCELLED” will appear in the top left
corner of the TV screen.
2-4
To resume regular playback, press REPEAT A-B again. “A-B
CANCELLED” or “A TO B CANCELLED” will appear in the top left
4
corner of the TV screen. Regular playback will resume from the
current point.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 24
24 DVD Audio Language
DVD
Some DVDs are recorded in multiple languages; some may have extra audio
options such as a director’s commentary or a music soundtrack.You can
choose the language or the soundtrack that you want to hear by adjusting
AUDIO in the DVD Player’s PREFERENCES PAGE.To do so, follow the
steps below.
Or, the easiest way to choose a different audio language or soundtrack is to
press the AUDIO button on the remote control repeatedly during DVD
playback.The audio will change immediately to the language or soundtrack
you select.
2,6
Press STOP twice to stop DVD playback.
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK. You can select PREFERENCES only if you have completely
3
stopped DVD playback by pressing STOP twice as directed in step 1.
3-5
AUDIO will be selected. Press 2.
4
- - PREFERENCES PAGE - -
F
AUDIO
ENGLISH
FRENCH
1
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
SPANISH
CHINESE
JAPANESE
MAIN PAGE
SET PREFERENCE TO ENGLISH
Helpful Hints
Language options will appear to the right of AUDIO. Press 3 or 4
to choose the language you want, then press OK.
Although the DVD Player shows ENGLISH, FRENCH, SPANISH,
CHINESE, and JAPANESE, you can only hear the selected language if
that language is recorded on the DVD. If there is another language
or soundtrack on the DVD that does not show in this AUDIO
menu, choose the language at the DVD Disc menu or by pressing
the AUDIO button on the remote control repeatedly. Details on DVD
Disc menus are on page 19.
• Some Audio CDs,Video CDs, or
SuperVideo CDs are recorded
on multiple audio channels. For
example, a Karaoke Disc may
record music on the left channel
and vocals on the right channel.
Press the AUDIO button
5
6
repeatedly during playback to
choose an audio channel.
Choose STEREO to hear both
channels simultaneously (for
example, the music and the
vocals together). Options may
include LEFTVOCAL, RIGHT
VOCAL, MONO LEFT, MONO
RIGHT, or STEREO. Check your
Disc case for details.
Press SYSTEM MENU to remove the menus.
• If adjusting the Audio language
as described on this page does
not change the Audio, change
the settings in the DVD’s Disc
menu or by pressing the AUDIO
button repeatedly during DVD
playback. Make sure the
language you want is available
on the current DVD.
• When you press STOP twice to
stop DVD playback so you can
adjust AUDIO, this cancels the
Resume feature.When you play
the DVD again, playback starts
at the beginning of the DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 25
DVD Subtitle Language 25
DVD
Some DVDs include subtitles. Choose the language you want for available
subtitles by adjusting SUBTITLE in the DVD Player’s PREFERENCES PAGE.
To do so, follow the steps below.
Or, the easiest way to choose subtitles is to press the SUBTITLE button on
the remote control repeatedly during DVD playback.The subtitles will
appear in the language you select.
2,6
Press STOP twice to stop DVD playback.
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK. You can select PREFERENCES only if you have completely
3
stopped DVD playback by pressing STOP twice as directed in step 1.
Press 4 to select SUBTITLE, then press 2.
4
- - PREFERENCES PAGE - -
3-5
1
AUDIO
SUBTITLE
F
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
SET PREFERENCE TO ENGLISH
Language options will appear to the right of SUBTITLE. Press 3 or
4 to choose the language in which you want subtitles to
appear, or choose OFF if you do not want to see any
subtitles during DVD playback.Then, press OK.
Although the DVD Player shows ENGLISH, FRENCH, SPANISH,
CHINESE, and JAPANESE, you can see subtitles in the selected
language only if they are available on the current DVD. Check the
DVD case for details on available subtitle languages.
If the DVD has subtitles in languages other than those listed in the
SUBTITLE menu, choose the language in the DVD Disc menu or by
pressing the SUBTITLE button on the remote control repeatedly.
Details on DVD Disc menus are on page 19.
5
6
Helpful Hints
• Some DVDs only allow you to
choose Subtitles languages in
the DVD Disc menu. If
adjusting the Subtitle language
as described on this page does
not change the Subtitle during
DVD playback, change the
settings in the DVD’s Disc
menu or by pressing the
SUBTITLE button repeatedly
during DVD playback. Make
sure the language you want is
available on the current DVD.
• When you press STOP twice to
stop DVD playback so you can
adjust SUBTITLE, this cancels
the Resume feature.When you
start to play the DVD again,
playback automatically starts
at the beginning of the DVD.
• Press and hold the SUBTITLE
button on the remote control
for two seconds to turn the
subtitles on or off during
Press SYSTEM MENU to remove the menus.
playback. SUBTITLE ON or
SUBTITLE OFF will appear
briefly in the top left corner of
theTV screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 26
26 DVD Disc Menu Language
DVD
DVDs have a Disc menu that allows you to choose options such as Audio
Language, Subtitles, or other special features. Features vary among DVDs, so
the Disc menus are different for every DVD.
Some DVD Disc menus may be available in multiple languages.To choose a
language for a Disc menu using the DVD Player’s PREFERENCES PAGE,
follow the steps below.
2,6
Press STOP twice to stop DVD playback.
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK. You can select PREFERENCES only if you have completely
3
stopped DVD playback by pressing STOP twice as directed in step 1.
Press 4 repeatedly to select DISC MENU, then press 2.
3-5
4
- - PREFERENCES PAGE - -
AUDIO
SUBTITLE
F
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
ENGLISH
CHINESE
FRENCH
SPANISH
JAPANESE
1
SMART NAV
MAIN PAGE
SET PREFERENCE TO ENGLISH
Language options will appear to the right of DISC MENU. Press 3
or 4 to choose the language in which you want the DVD
Disc menu to appear.Then, press OK.
Although the DVD Player shows ENGLISH, CHINESE, FRENCH,
SPANISH, and JAPANESE, the Disc menu will appear in the selected
language only if it is available on the current DVD. Check the DVD
case for details on available languages.
If the Disc menu is available in languages other than those listed for
DISC MENU, choose the language in the DVD Disc menu. Details on
DVD Disc menus are on page 19.
5
6
Press SYSTEM MENU to remove the menus.
Helpful Hints
• If adjusting the Disc menu
language as described on this
page does not change the
language as you preferred,
change the settings in the
DVD’s Disc menu. Make sure
the language you want is
available on the current DVD.
•When you press STOP twice to
stop DVD playback so you can
adjust DISC MENU, playback
automatically starts at the
beginning of the DVD when
you start playback again.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 27
Parental Controls Password 27
DVD
Parental Controls limits viewing of DVDs.When a DVD has been Locked or if
a DVD has a movie rating that exceeds the Parental Level you select, a viewer
must enter a password before viewing the DVD.To set your password, follow
the steps below.
To adjust the PARENTAL level so DVDs cannot play if they exceed that
level, see page 29.
6
To prevent specific DVDs from playing, regardless of how you set the
PARENTAL level, see page 28.
Press STOP twice to stop DVD playback.
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK. You can select PREFERENCES only if you have completely
2,
3
stopped DVD playback by pressing STOP twice as directed in step 1.
3-5,7
Press 4 repeatedly to select PASSWORD, then press 2.
8
4
- - PREFERENCES PAGE - -
AUDIO
1
SUBTITLE
DISC MENU
PARENTAL
F
PASSWORD
DEFAULTS
SMART NAV
CHANGE
MAIN PAGE
CHANGE PASSWORD
CHANGE will be highlighted. Press OK.
5
6
A box beside OLD PASSWORD will be highlighted.
Press the Number buttons to enter your old four-digit
password. (If this is the first time you have set a password, press
3,3,0,8.) The box beside NEW PASSWORD will be highlighted
automatically. Press the Number buttons to enter a new four-
digit password of your choice. The box beside CONFIRM PWD.
will be highlighted automatically. Press the Number buttons to
enter the same new four-digit password you just entered for
the NEW PASSWORD.
PASSWORD CHANGE PAGE
OLD PASSWORD :
NEW PASSWORD : XXXX
CONFIRM PWD :
XXXX
X
Helpful Hints
• The default or factory preset
password is 3 3 0 8.You can
use it to play a Locked Disc or
enter it as the old password.
The 3 3 0 8 password is
acceptable even after you set
your own personal password.
• Magnavox denies any liability
associated with unintended
watching of Discs. Make sure
your Discs play according to your
Parental Controls settings before
you allow children access to the
Player.
PLEASE REENTER NEW PASSWORD
Press OK to save the new password.
7
8
Press SYSTEM MENU to remove the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 28
28 Parental Controls Disc Lock
Not all DVDs are rated or coded by the Disc maker.You can specifically
lock or unlock a DVD, regardless of its rating. If you lock a specific DVD,
you must enter your Password before you can watch the DVD. Password
details are on page 27.
Press SYSTEM MENU.
1
1,5
GENERAL SETUP will be selected. Press OK.
2
DISC LOCK will be selected. Press 2.
3
- - GENERAL PAGE - -
F
DISC LOCK
PROGRAM
VFD DIM
UNLOCK
LOCK
OSD LANG
SCR SAVER
MAIN PAGE
2-4
DISC UNLOCK
Press 3 or 4 to select UNLOCK or LOCK, then press OK. If
you choose UNLOCK, the DVD that is currently in the DVD Player
will be unlocked for future viewing.You can view the Disc without
having to enter your four-digit password. If you choose LOCK, the
DVD that is currently in the DVD Player cannot play unless you
enter your four-digit password. INPUT PASSWD will appear on the
TV screen to prompt you to enter your password. Password details
are on page 27.
4
5
Press SYSTEM MENU to remove the menus.
Helpful Hints
• Two-sided DVDs may have a
different ID for each side.To
unlock the entire Disc, unlock
each side.
• Multi-volumeVideo CDs or
DVD sets may have a different
ID for each volume or Disc.To
unlock the set, unlock each
volume or Disc.
• Once you enter your password
to play a Locked Disc, you can
stop and resume playback
without reentering the
password every time you
resume play. However, if you
open the disc tray or turn off
the DVD Player, you will have
to enter the password to play
the Disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 29
Parental Controls Levels 29
You can set the DVD Player to block or allow DVD playback according to
the movie rating of the DVD. If someone tries to play a DVD that has a
rating that exceeds the level you selected, they must know your password.
You must enter the password before the DVD will play. Password details are
on page 27.
Not all DVDs conform to the levels you select, as not all DVDs are coded
or protected by the DVD manufacturer.Therefore, make sure the DVD
plays according to your Parental level choice before you allow children
unlimited access to the DVD Player or DVDs.
To prevent specific DVDs from playing, regardless of how you set the
PARENTAL level, see page 28.
2,7
Press STOP twice to stop DVD playback.
6
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK. You can select PREFERENCES only if you have completely
3
3-6
1
stopped DVD playback by pressing STOP twice as directed in step 1.
Press 4 repeatedly to select PARENTAL, then press 2.
4
- - PREFERENCES PAGE - -
AUDIO
1 G
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
8 ADULT
NO_PARENTAL
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAV
F
MAIN PAGE
SET TO PG
Press 3 or 4 to choose the Parental level at which you want
to restrict playback, then press OK.
For example, if you do not want children to watch movies rated
above PG, select 3 PG. DVDs rated PG can play without entering a
password; however, DVDs rated PG-13, R, NC-17, or X (ADULT)
cannot play unless you enter your password.
5
Select NO PARENTAL if you want the DVD Player to play all DVDs,
regardless of their movie rating.You will not have to enter a
password in order to play a DVD.
RATING EXPLANATIONS
• ADULT - Mature material; should be viewed only by adults due to graphic
sexual material, violence, or language.
• NC-17 - No children under age 17; not recommended viewing for children
under age 17.
• PG-R - Parental Guidance - Restricted; recommended that parents restrict
children under age 17 from viewing or allow children to view only when
supervised by a parent or adult guardian.
• PG 13 - Material is unsuitable for children under age 13.
• PG - Parental Guidance suggested.
• G - General Audience; recommended as acceptable for viewers of all ages.
A screen will prompt you to enter your password. Press the
Number buttons to enter your four-digit password, then
press OK. Password details are on page 27.
Helpful Hint
6
7
•When you press STOP twice to
stop DVD playback so you can
adjust the PARENTAL level,
playback automatically starts
at the beginning of the DVD
when you resume playback.
Press SYSTEM MENU to remove the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 30
30 Programmed Playback
AUDIO CD VIDEO CD
You may play Tracks in an order you specify instead of playing the Tracks in
normal order (1, 2, 3, etc.).The order in which you set the Tracks to play is
a Program. For example, if you want to set up an Audio CD so Track 12 will
play first, put Track 12 in Program position number one (1).
To set up a Program, follow these steps.
1
Press SYSTEM MENU.
1
GENERAL SETUP will be selected. Press OK.
2
4-5
2-6
Press 4 to select PROGRAM, then press 2to select ON. You
can select PROGRAM only when an Audio CD orVideo CD is in
3
the DVD Player.
- - GENERAL PAGE - -
DISC LOCK
PROGRAM
VFD DIM
F
SETUP
OSD LANG
SCR SAVER
MAIN PAGE
PROGRAM PLAY ON
Press OK. The PROGRAM PLAY PAGE will appear.This is where
you enter the Track numbers in the order in which you want to play
them.The Number 1 space will be selected automatically as your
starting point.
While the Number 1 space is highlighted, press the
Number buttons to enter theTrack number you want to
play first.TheTrack number will appear in the box beside
the number 1.
4
PROGRAM PLAY PAGE
PLEASE INPUT 001 - - - 029
1
2
3
4
12
5
6
7
8
9
10
11
12
Helpful Hints
CLEAR
PROG
QUIT
• You can enter a maximum of
96Tracks in a Program.To
access the PROGRAM PLAY
PAGES for positions 13-96, press
Previous 4 or Next ¢ .
•To erase all theTracks from the
Program, press 4and/or 1to
select CLEAR at the bottom of
the PROGRAM PLAY PAGE, then
press OK.This clears all the
Program positions.
•To stop enteringTracks in the
Program, press 4and/or 2to
select QUIT at the bottom of
the PROGRAM PLAY PAGE, then
press OK.When you play the
Disc,Tracks will play in normal
order (1, 2, 3, etc.).
ENTER PROGRAM
Use the 3, 4, 1, 2 buttons to move to the next Program
position, then use the Number buttons on the remote
control to enter your otherTracks. Repeat this process until
you have entered all theTracks you want into the Program.
If you enter an incorrect Track number in one of the previous
Program positions, press 34 1 2 to select the Program position.
Press any Number button to clear the box. Use the Number
buttons to reenter the correct Track number you want.
5
6
When you have entered all theTracks you want in the
Program, press 4, 1, and/or 2 to select PROG at the
bottom of the PROGRAM PLAY PAGE.Then, press OK. This
will store the Tracks in the Program.The Program may start playing
automatically. If not, press PLAY 3 to start playing the Program.
• The Program will accept aTrack
number only if it is available on
the current Disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 31
Preview 31
VIDEO CD
SomeVideo CDs or SuperVideo CDs may contain preview or introductory
information. If you are not sure of the contents of aVideo CD or its Tracks,
use the Preview features to see the content of the Tracks. Not allVideo
CDs contain this information. See your Disc case for details.
While playback is stopped, press PREVIEW. The following
menu will appear.
1
2
1. INTRO
2. DISC
3. TRACK
4. EXIT
2
Press the corresponding Number button on the remote control to
select INTRO, DISC,TRACK, or EXIT, then press OK. Specific steps
for each option are as follows:
• INTRO - Press Number button 1 to select INTRO, then
press OK. The DVD Player will play the first 10 seconds of each
Track, introducing you to the content of each Track. Press STOP 7
to stop the Track review, or the review will stop automatically after
the last Track.
• DISC - Press Number button 2 to select DISC, then press
OK. This accesses a screen showing up to nine miniature pictures.
Each picture represents a Track; the picture will likely be a scene
from the beginning of the Track. Select a Track by pressing Previous
4 or Next ¢. Press a Number button, then press OK, to start
playing a specific Track number.This will be useful if you want to go
directly to a Track but cannot remember the Track number of the
segment you are seeking.
2
1
•TRACK - Press Number button 3 to selectTRACK, then
press OK. This will divide a single Track into nine parts and display
a miniature picture representing each part. Press a Number button
to select one of the parts of the Track, then press OK to begin
playing the Track from the point you selected.
Helpful Hint
• EXIT - Press Number button 4 to select EXIT, then press
OK to remove the Preview menu.
• You also can use the INTRO
feature on some Audio CDs.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 32
32 Smart Navigator, JPEG and MP3 Features
Smart Navigator
This DVD Player can play some Compact Disc-Recordable (CD-R) discs
that you record on your computer.These CD-Rs may contain pictures in a
JPEG format or audio files/tracks in an MP3 format. For example, you may
have photographic film developed by a retailer that places the pictures on a
CD-R for you.These pictures may be in JPEG format. Or, you may copy or
download MP3 music files from certain legal Internet sites, then copy those
files onto a CD-R. You cannot make or record such CD-Rs using this DVD
Player. See your computer manual for details on making CD-R recordings.
If you are playing a CD-R on this DVD Player and the CD-R contains JPEG
or MP3 files, you may want to access the CD-R menu using Smart
Navigator or use some of the features described below.
2,5
Press the STOP 7 button twice to stop Disc playback
completely.
1
Press SYSTEM MENU.
2
Press 4 repeatedly to select PREFERENCES, then press
OK.
3,4
3
4
Press 4 repeatedly to select SMART NAV (Smart
Navigator), then press 2. Press 3 or 4 to select NO MENU
or WITH MENU, then press OK. If you select NO MENU, the
Disc will play the JPEG or MP3 files in the order in which they are
recorded on the Disc (1, 2, 3, etc.). Select WITH MENU to play the
JPEG or MP3 files in the selected folder.
1
- - PREFERENCES PAGE - -
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
F
SMART NAV
NO MENU
WITH MENU
MAIN PAGE
MENU MODE
Press SYSTEM MENU to remove the menus.
5
JPEG and MP3 Features
• After you open one JPEG picture, each subsequent file will appear
automatically.
•You may use the Number buttons to select a JPEG or MP3 file directly for
immediate playback. Press the Number button, then press OK to begin
playback.
• Press PREVIEW during Disc playback to access a Preview screen.This
screen shows up to nine miniature pictures; each picture represents a JPEG
image. Move to additional Preview screens by pressing Previous 4 or
Next ¢. To play a specific JPEG file, press a Number button or press 3,
4, 1, or 2 to select the file, then press OK.
• To see a JPEG file from a different angle, press 3 to flip the picture
vertically, press 4 to flip the picture horizontally, press 1 to rotate the
picture counterclockwise, or press 2 to rotate the picture clockwise.
• Press ZOOM to enlarge a JPEG image.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 33
TV Display 33
You may set the DVD Player to display video in one of three formats:
Letterbox, Pan & Scan, or Wide.To choose a format, follow these steps.
Press SYSTEM MENU.
1
Press 4 repeatedly to select SETUPVIDEO OUTPUT, then
1,5
press OK.
2
TV DISPLAY will be selected. Press 2.
3
Press 3 or 4 to select NORMAL/PS, NORMAL/LB, or
WIDE, then press OK.
4
Select NORMAL/LB (letterbox) if you want to see the picture with
black bars at the top and bottom of the screen.This looks like the
picture you see when watching movies in a theater.This setting is
possible only if the DVD was recorded in the letterbox or
widescreen format. Check the Disc case for details.
Select NORMAL/PS (pan & scan) if you want both sides of the
picture to be trimmed or formatted to fit your TV screen.This
setting is possible only if the DVD is recorded in pan & scan or
regular format. Check the Disc case for details.
2-4
Select WIDE if you connected the DVD Player to a widescreen TV.
- - VIDEO OUTPUT PAGE - -
F
TV DISPLAY
VIDEO OUTPUT
TV TYPE
NORMAL/PS
NORMAL/LB
WIDE
VIDEO MODE
BRIGHTNESS
CONTRAST
SATURATION
NORMAL TV LETTER BOX
Press SYSTEM MENU to remove the menus.
5
Helpful Hints
• Most DVDs only play in the
format in which they were
recorded. For example, if the
DVD case says the DVD is
recorded in Letterbox or
Widescreen format, you may
play the DVD only with the
black bars showing at the top
and bottom of the picture.
Even if you set the DVD
Player’sTV DISPLAY to
NORMAL/PS, the picture will
still show in the widened
format, with bars at the top
and bottom of the screen.
• The format you select must be
available on the Disc. If it is
not, the settings forTV DISPLAY
will not affect the picture
during playback.
• Some widescreenTVs may
show only part of the DVD
Player’s menu.Adjust the
screen mode on yourTV. See
yourTV owner’s manual for
details.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 34
34 Video Output,Video Mode
Video Output
If you used S-Video or Component video connections as described on pages
11-12, set theVIDEO OUTPUT to S-VIDEO toYCBCR (for ComponentVideo)
by following the steps below.You only need one video connection between the
TV and the DVD Player.You can not use S-Video and ComponentVideo at the
same time.
If you used the yellowVIDEO (VIDEO OUT) jack on the Player to connect the
Player to the TV, you do not need to adjust theVIDEO OUTPUT setting.
1,5
Press SYSTEM MENU.
1
Press 4repeatedly to select SETUPVIDEO OUTPUT, then
press OK.
2
Press 4to selectVIDEO OUTPUT, then press 2.
3
Press 3or 4to select S-VIDEO orYCBCR, then press OK.
Choose S-VIDEO if you connected the Player’s S-VIDEO (VIDEO OUT)
2-4
4
jack to theTV’s S-Video In jack as described on page 11. ChooseYCBCR if
you connected the Player’sYCBCR (VIDEO OUT) jacks to yourTV’s
ComponentVideo In jacks as described on page 12.
- - VIDEO OUTPUT PAGE - -
TV DISPLAY
VIDEO OUTPUT
TV TYPE
F
S-VIDEO
YCBCR
VIDEO MODE
BRIGHTNESS
CONTRAST
SATURATION
VIDEO OUTPUT YCBCR
Press SYSTEM MENU to remove the menus.
5
Video Mode
Just as you can adjust your picture on your TV, you can adjust some picture
elements at the DVD Player. Choose a picture setting that best displays the
Disc you are playing.This feature is known as Smart Picture orVideo Mode
and can be adjusted by following the steps below.
Press SYSTEM MENU.
1
1
Press 4repeatedly to select SETUPVIDEO OUTPUT, then
press OK.
2
Press 4repeatedly to selectVIDEO MODE, then press 2.
3
Press 3or 4to select BRIGHT, STANDARD, SOFT, or
PERSONAL, then press OK.
4
- - VIDEO OUTPUT PAGE - -
TV DISPLAY
VIDEO OUTPUT
TV TYPE
F
2-4
VIDEO MODE
BRIGHTNESS
CONTRAST
BRIGHT
STANDARD
SOFT
PERSONAL
SATURATION
SET STANDARD VIDEO OUTPUT
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 35
Video Mode (cont’d) 35
If you selected BRIGHT, STANDARD, or SOFT, you are
finished. Press SYSTEM MENU to remove the menus.You
may want to play a Disc for a few minutes in each setting to decide
which you prefer.
If you selected PERSONAL, you can adjust specific picture
elements for your preference. Go to step 6 to adjust these
items.
5
5,9
Press 1 to reselectVIDEO MODE.
6
7
8
Press 3 or 4 to choose either BRIGHTNESS, CONTRAST,
or SATURATION.Then, press 2.
Press 3 or 4 to adjust the setting you selected, then press
OK. Press 1 to go back and select another picture setting
(BRIGHTNESS, CONTRAST, or SATURATION) as
necessary. Repeat steps 7-8 until the picture appears as you
want it.
• For BRIGHTNESS, choosing a more positive value (+1 to +4)
brightens the color on the screen and seems to add white to the
picture. Choosing a more negative value (-1 to -4) darkens the
colors in the picture. Choose zero (0) for the average setting.
• For CONTRAST, choosing a more positive value (+1 to +4) adds
more contrast or noticeable difference between the black and white
in your picture. Increasing the CONTRAST sharpens the picture.
Choose a more negative CONTRAST value (-1 to -4) to blur the
distinction between black and white in the picture.The picture will
not seem as sharp.
6-8
• For SATURATION, choose a more positive value (+1 to +4) to
increase the color in your picture.You will notice in the menu that
as you increase the SATURATION, the blue of the menu is a deeper,
brighter blue. However, to decrease the color in the picture, choose
a more negative value (-1 to -4).As you adjust this in the menu, you
will notice that the menu has the least color at -4, and the picture
seems almost black and white. Choose zero (0) to balance the color.
- - VIDEO OUTPUT PAGE - -
- - VIDEO OUTPUT PAGE - -
TV DISPLAY
VIDEO OUTPUT
TV TYPE
VIDEO MODE
BRIGHTNESS
CONTRAST
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+4
+3
+2
+1
0
-1
-2
-3
-4
TV DISPLAY
VIDEO OUTPUT
TV TYPE
VIDEO MODE
BRIGHTNESS
CONTRAST
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+4
+3
+2
+1
0
-1
-2
-3
-4
F
F
SATURATION
SATURATION
SET AS 0
SET AS 0
- - VIDEO OUTPUT PAGE - -
TV DISPLAY
VIDEO OUTPUT
TV TYPE
VIDEO MODE
BRIGHTNESS
CONTRAST
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+4
+3
+2
+1
0
-1
-2
-3
-4
F
SATURATION
SET AS 0
Helpful Hint
When you are finished, press SYSTEM MENU to remove
the menus.
• You can choose aVideo Mode
or Smart Picture setting quickly
by pressing the PICTURE
button on the front of the DVD
Player. Press PICTURE
repeatedly to choose BRIGHT,
STANDARD, SOFT, or
PERSONAL.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 36
36 TVType
TVType
DVDs are recorded according to a color system, the most common of which are
NTSC and PAL. NTSC is the most common in the United States.YourTV also
operates according to a color system.
This DVD Player is compatible with NTSC and PAL. However, in order for a DVD
to play on this DVD Player, the color system of the DVD, theTV, and the DVD
Player should match. If all three are not the same, the DVD may play in only black
and white, the picture may roll continuously, or the picture may appear distorted.
This feature allows you to set the DVD Player to match the color systems of
your DVD and yourTV.
1,5
Press SYSTEM MENU.
1
Press 4 repeatedly to select SETUPVIDEO OUTPUT, then
press OK.
2
Press 4 to selectTVTYPE, then press 2.
- - VIDEO OUTPUT PAGE - -
3
TV DISPLAY
VIDEO OUTPUT
F
2-4
TV TYPE
MULTI
NTSC
PAL
VIDEO MODE
BRIGHTNESS
CONTRAST
SATURATION
NTSC TV
Press 3 or 4 to select MULTI, NTSC, or PAL, then press
OK. Choose NTSC if your TV is NTSC-compatible and your DVDs
are recorded in NTSC. Choose PAL if your TV is PAL-compatible
and your DVD is recorded in PAL. Choose MULTI if your TV is
compatible with both NTSC and PAL and you want the DVD Player
to automatically select the color system of the current DVD.
4
5
Press SYSTEM MENU to remove the menus.
Helpful Hint
• Your DVD must be recorded in
NTSC or PAL. Discs recorded in
other color systems will not play
on this DVD Player. Check the
Disc case for details. NTSC or
PAL may appear on the inside
ring of the DVD.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 37
Speaker Setup, 3D Sound 37
Speaker Setup
Adjust DOWNMIX according to how you connected the Player to yourTV
and/or Stereo. Balance the volume during playback by adjusting Dynamic Range
Control (D.R.C.).
Press SYSTEM MENU.
1,5
1
Press 4 to select SPEAKER SETUP, then press OK.
2
Press 3 or 4 to select DOWNMIX or D.R.C., then
press 2and follow step 4 according to your choice.
3
• If you selected DOWNMIX, press 3or 4to select LT/RT
(left/right) or STEREO, then press OK. Choose LT/RT if you
4
connected the Player to a stereo that has Dolby Pro Logic. Details are
on page 13. Select STEREO if you connected the Player to aTV or
Stereo that has left and right Audio In jacks but does not have Dolby
Pro Logic.
- - SPEAKER SETUP PAGE - -
2-4
F
DOWNMIX
D . R . C .
STEREO
LT/RT
MAIN PAGE
STEREO DOWNMIX
• If you selected D.R.C., press
3
or
4
to select ON or OFF, then
press OK. To level the volume during Disc playback, choose ON.There
will not be such a large range between the loudest and softest parts of the
sound.To hear the highs and lows of the volume, set D.R.C. to OFF.
- - SPEAKER SETUP PAGE - -
DOWNMIX
D . R . C .
F
ON
OFF
MAIN PAGE
DYNAMIC RNG COMPRESSION OFF
Press SYSTEM MENU to remove the menus.
5
3D Sound
Once you set DOWNMIX to LT/RT or STEREO, you can choose whether
1,3
2
to activate the fuller 3D (three-dimensional) sound during Disc playback.
Press the DISPLAY button.
1
Press 2 repeatedly to select ON or OFF beside 3D.Then,
press 3 or 4 to choose ON or OFF.
2
T:
1 / 3
C: 12 / 30
3D ON
TC: 00:37:58
Press DISPLAY to remove the information box.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 38
38 SPDIF, LPCM 96K Setup
SPDIF Setup
SPDIF is the Sony Philips Digital Interface, or a method of transferring
digital audio. If you connected the DVD Player to a Stereo using the
OPTICAL or COAXIAL jack as shown on page 14, you need to adjust the
SPDIF OUT setting as described below. If you are not using the OPTICAL
or COAXIAL jack, no adjustment is necessary.
1,5
Press SYSTEM MENU.
1
Press 4 repeatedly to select SPDIF SETUP, then press OK.
2
SPDIF OUT will be selected. Press 2.
3
Press
3
or
4
to select RAW or PCM, then press OK. Choose RAW
to select the original default audio settings as received by most Stereos.
However, if the sound is distorted, your Stereo may need to receive audio in
the PCM (pulse code modulation) format. Choose PCM if your Stereo is
PCM-compatible. Refer to your Stereo owner’s manual for details.
4
2-4
- - SPDIF SETUP - -
F
SPDIF OUT
LPCM 96K
RAW
PCM
MAIN PAGE
RAW DATA VIA SPDIF
Press SYSTEM MENU to remove the menus.
5
LPCM 96K Setup
If you connected the DVD Player to a Stereo using the OPTICAL or COAXIAL
jack as shown on page 14, you may need to adjust the LPCM 96K setting.
Discs are recorded in a certain sampling rate. (The higher the sampling rate, the
better the sound quality.) Some Discs are recorded in a high sampling rate of 96
kHz. Set LPCM 96K to ON if you want the DVD Player to detect the sampling
rate of Discs during playback and automatically choose the best sound available.
1,5
Press SYSTEM MENU.
1
Press 4 repeatedly to select SPDIF SETUP, then press OK.
2
Press 4 to select LPCM 96K, then press 2.
3
Press 3 or 4 to select OFF or ON, then press OK.
4
- - SPDIF SETUP - -
2-4
SPDIF OUT
LPCM 96K
F
OFF
ON
MAIN PAGE
SET LPCM OUTPUT AS 96K
Press SYSTEM MENU to remove the menus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 39
DVD Player On-Screen Display Language 39
You can set the DVD Player’s Setup menus and on-screen messages to
appear in English or Chinese. English and Chinese are the only two
languages available.This language selection will not affect the languages of
DVD Disc or Title menus or any audio or subtitle languages.To change the
DVD Player’s Setup menu language, follow these steps.
Press SYSTEM MENU.
1,5
1
GENERAL SETUP will be selected. Press OK.
2
Press 4 repeatedly to select OSD LANG (on-screen display
language), then press 2.
3
- - GENERAL PAGE - -
DISC LOCK
PROGRAM
VFD DIM
F
OSD LANG
SCR SAVER
ENGLISH
CHINESE
2-4
MAIN PAGE
SET OSD LANGUAGE TO ENGLISH
Press 3 or 4 to select ENGLISH or CHINESE, then press
OK.
4
5
Press SYSTEM MENU to remove the menus.
Helpful Hint
• If you accidentally select
CHINESE and need ENGLISH,
follow these steps.
1) Press SYSTEM MENU.
2)The top line will be selected.
Press OK.
3)The top line will be selected.
Press 4 to select the fourth
item in the menu (belowVFD),
then press 2.
4) Press 3 to select the top
line, then press OK.The menus
will change to English.
5) Press SYSTEM MENU to
remove the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 40
40 Display Dim, Screen Saver
Display Dim
You can adjust the brightness of the display panel on the front of the DVD
Player. Choose the setting that best enables you to see the display information
from a distance. Follow the steps below to adjust the brightness of the display
panel according to your preference.
Press SYSTEM MENU.
1,5
1
GENERAL SETUP will be selected. Press OK.
2
Press 4to selectVFD DIM, then press 2.
- - GENERAL PAGE - -
3
DISC LOCK
PROGRAM
F
VFD DIM
100
70
OSD LANG
SCR SAVER
40
MAIN PAGE
2-4
SET TO 100 LEVEL
Press 3or 4to select 100 (full brightness), 70 (70% of highest
brightness), or 40 (40% of highest brightness). Then, press OK.
The display will dim or brighten according to your choice.
4
5
Press SYSTEM MENU to remove the menus.
Screen Saver
The Screen Saver is the moving DVD logo that appears on yourTV screen
when playback is stopped. It prevents damage to yourTV screen caused by
leaving a still image on theTV too long.
Press SYSTEM MENU.
1
1,5
GENERAL SETUP will be selected. Press OK.
2
- - GENERAL PAGE - -
Press 4repeatedly to select SCR SAVER (screen saver), then
press 2.
3
DISC LOCK
PROGRAM
VFD DIM
OSD LANG
F
SCR SAVER
ON
OFF
MAIN PAGE
2-4
SCREEN SAVER ON
Press 3or 4to select ON or OFF, then press OK. Choose ON
to have the Screen Saver appear on yourTV screen when you have not
used the Player for approximately five minutes.To disable the screen
saver, choose OFF.A dark blue DVD screen will appear when playback is
stopped.
4
5
Press SYSTEM MENU to remove the menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 41
DVD Player Defaults 41
To restore the original settings of the DVD Player, follow the steps below.
Press the STOP 7 button twice to stop Disc playback
completely.
1
Press the SYSTEM MENU button.
2
2,5
Press 4 repeatedly to select PREFERENCES, then press
OK.
3
4
Press 4 repeatedly to select DEFAULTS, then press 2 to
select RESET, then press OK. The original settings of the DVD
Player will be restored.
- - PREFERENCES PAGE - -
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
F
3,4
1
DEFAULTS
RESET
SMART NAV
MAIN PAGE
LOAD FACTORY SETTINGS
Press SYSTEM MENU to remove the menus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 42
42 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service.You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial
number of your product before you call.This information is on the rear of the product.Also, please
take a moment to identify the problem you are having, and be prepared to explain this to the
representative. If you believe the representative will need to help you with operations, please stay near
the product. Our representatives will be happy to assist you.
No power
•
•
•
Press the POWER button on the front of the DVD Player.
Make sure you connected the DVD Player’s power cord to an AC power outlet.
Make sure the AC outlet has power by trying another appliance in the same outlet.
No picture
•
•
Make sure the TV power is on.
Check the video cables. Make sure the cable(s) are fastened securely to the DVD Player and to the
TV.
•
Set your TV to the correctVideo In channel.These channels are usually near channel 00. Or, you
may have a button on the TV remote control that selects an Auxiliary or A/V IN channel. See your
TV owner’s manual for details. Or, go to your lowest TV channel, then change channels down until
you see DVD playback or the DVD Player’s screen saver on the TV.
•
You only need one video connection between the DVD Player and the TV. Details are on page 9.
Distorted picture
•
Check the Disc for fingerprints. Clean the Disc with a soft cloth, wiping from the center to the
edge in a straight line.
Sometimes a small amount of picture distortion may appear.This is not a malfunction.
•
The picture is distorted, the picture rolls, or the picture is only black and white.
•
TVs have a color system standard, usually NTSC in the United States. If the Disc’s or DVD Player’s
color system is different than your TV’s color system, the picture may be distorted or colorless.
Details are on page 36.
Check theVIDEO OUTPUT setting. Details are on page 34. If you connected the DVD Player to a TV
using S-Video cable (as described on page 11), setVIDEO OUTPUT to S-VIDEO. If you connected
the DVD Player to a TV using Component video cable (red, green, and blue as described on page
12), setVIDEO OUTPUT toYCBCR. If theVIDEO OUTPUT setting is incorrect (for example, you
used S-Video cable butVIDEO OUTPUT is set toYCBCR), the picture may be black and white until
you correct theVIDEO OUTPUT setting.
•
If you connected the DVD Player to a TV using the supplied yellow video cable (as described on
page 10) or with an RF modulator, adjustingVIDEO OUTPUT does not affect the picture.
The sound is distorted or there is no sound during Disc playback.
•
•
Make sure you did not connect any cables from the DVD Player to a Stereo’s “PHONO IN” jack.
Make sure you did not connect a digital jack on the Player (OPTICAL or COAXIAL) to an analog
jack on the Stereo. (Analog audio jacks are usually labeled as such and are usually red and white.)
No sound
•
Check the audio connections. Details are on pages 9-14. Remember, you only need one audio
connection. See page 9 to see what connection best suits your situation.
Make sure cables are connected firmly to all equipment.
Select another channel, sound source, or Auxiliary station at your Stereo or TV. See your Stereo’s
manual or TV’s manual for details. Or, just continue selecting the different sound sources or modes
on the Stereo or TV until you hear sound from the Disc that is in the DVD Player. Details are on
pages 9-14.
•
•
•
•
Make sure your SPDIF OUT and SPEAKER SETUP settings match the capabilities of your Stereo
Receiver or TV. Details are on pages 37-38.
Check the Audio setting of a DVD in the DVD Disc Menu, if available, and adjust as necessary.
Disc will not play.
•
Make sure the Disc label is facing up. If you are playing a two-sided Disc, make sure the label of the
side you want to play is facing up. Details are on page 15.
•
•
Check the Parental Controls. Details are on pages 27-29.
Check the Region Code of the DVD.The DVD must be coded for All regions or Region 1 in order
to play on this DVD Player. Details are on page 7.
See if the Disc is defective by trying another Disc. Make sure the Disc is not scratched or warped.
Carefully clean the Disc. Details are on page 6.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 43
Helpful Hints (cont'd) 43
An Audio CD will not play.
•
Some Audio CDs available on the market are copy protected.These discs will not play on this DVD
Player. See your retailer for options regarding non-protected Audio CDs.
The DVD logo does not appear on theTV screen after you remove a Disc.
Reset the DVD Player by switching it off, then on again.
•
The DVD Player does not respond to the remote control.
•
•
•
Aim the remote control directly at the front of the DVD Player (not the TV).
Remove any obstacles between the DVD Player and the remote control.
Inspect or replace the batteries in the remote control. Details are on page 8.
The DVD Player will not select some features, such as Angles, Subtitles, or
multi-language Audio.
•
The feature may not be available on the Disc. If it is not, the
Check the Disc case to see if the Disc has the feature. If the Disc does not have the feature, the
DVD Player cannot create the feature.This is not a malfunction of the DVD Player.
will appear on the TV screen.
The DVD Player does not work.
•
Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord
and try to operate the Player again as usual.
Strange codes appear on the Player’s display.
•
•
•
Remove and reinsert the Disc.
Clean the Disc.
Disconnect the power cord from the power outlet for a few minutes, then reconnect the cord and
try playback as usual.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 44
44 Glossary
Analog: Sound that has not been turned into numbers.Analog sound varies, while digital sound has specific
numerical values.Analog sound is available when you use the red and white audio jacks on your equipment.
These jacks send audio through two channels, the left and right.
AUDIO OUT Jacks: Jacks on the rear of the DVD Player that send audio to another system (TV, Stereo
Receiver, etc.).
CD: Compact Disc.
Chapter: A part of a Title.
COAXIAL jack: Sends digital audio to a Stereo Receiver, allowing you to adjust the volume at the Receiver.
The Receiver must have a Coaxial In jack.This connection provides the 5.1 channel surround sound as heard
in movie theaters.
ComponentVideoY CB CR Jacks: The Out jacks on the rear of the DVD Player that send high-quality
video to a TV that has ComponentVideo In jacks.
Digital: Sound that has been converted into numerical values. Digital sound is available when you use the
COAXIAL or OPTICAL jacks on the Player.These jacks send audio through multiple channels, instead of just
two channels as analog does.
Dolby Digital: A surround sound system that provides 5.1 channel sound as used in movie theaters.
DVD: DigitalVideo Disc.
Letterbox: Widescreen format; a TV aspect ratio setting (4:3). Displays the video in full-width, with black
bars at the top and bottom of the TV screen.This format is similar to seeing a movie in a theater. If the Disc
does not include a letterbox format, selecting 4:3 letterbox may have no effect. (For example, some DVDs are
two-sided, with one side playing in widescreen format and the other side playing in a normal format.)
OPTICAL Jack: Converts electrical signals into optical signals before sending the audio to the Stereo
Receiver. Optical audio is not prone to external electrical influences and has less noise, reducing adverse
effects on external equipment. (Keep the protective cap on the jack when the jack is not in use.)
Pan & Scan: A TV aspect ratio setting (4:3). Displays the video with full-height picture with one or both
sides of the picture trimmed to fit on your TV screen. Some movie companies refer to this as “reformatting
the picture to fit your TV screen.”
PBC: Playback Control.A special feature on someVideo CDs/SuperVideo CDs that enables interactive use.
PCM: Pulse Code Modulation. A digital audio encoding system.
RGB: Red-Green-Blue.A top-quality video connection where red, green, and blue components of the picture
are carried through separate wires.This also is referred to as the component video connection.
S-Video: Produces a clearer picture by sending separate signals for the luminance and the color.
Title: A unit of recording on a DVD.
TV system: There are various systems for transmitting television signals, for example PAL, SECAM, and
NTSC. NTSC is the most common color system in the United States of America.
VCD: Video Compact Disc.
VIDEO OUT Jack: Jack on the rear of the DVD Player that sends video (picture) to a TV.
Widescreen: A TV aspect ratio setting (16:9). Displays the video appropriately when you connect the DVD
Player to a widescreen TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 45
Specifications 45
PLAYABLE DISCS
AUDIO PERFORMANCE
DVD-Video
SuperVideo CD
Video CD
DA Converter
24 bit
90dB
80dB
Signal to Noise (1kHz)
Dynamic range (1kHz)
DVD
Audio CD
fs 96 kHz
fs 48 kHz
fs 48 kHz
fs 44.1 kHz 4 Hz -20 kHz
fs 44.1 kHz 4 Hz -20 kHz
4 Hz -44 kHz
4 Hz -22 kHz
4 Hz -22 kHz
CD Recordable (CD-R)
CD Rewritable (CD-RW)
MP3-CD
SuperVideo CD
Video CD/Audio CD
LASER
TV STANDARD
PAL/50Hz
NTSC/60Hz
Number of lines
Playback
625
525
Multistandard (PAL/NTSC)
Type
Wavelength
Semiconductor laser GaAIAs
650nm (DVD)
VIDEO PERFORMANCE
780nm (Video CD/Audio CD)
7mW (DVD)
10mW (Video CD/Audio CD)
60 degree
Output power
VIDEO OUT
S-VIDEO OUT
1Vpp---75Ω
Y: 1.00Vpp---75Ω
C: 0.30Vpp---75Ω
Y: 1.00Vpp---75Ω
CR: 0.7Vpp---75Ω
CB: 0.7Vpp---75Ω
Beam divergence
Y CB CR
REAR CONNECTIONS
ComponentVideo Out
S-Video Out
Cinch (green/blue/red)
Mini DIN 4-pins
CABINET
Video Out
Audio Out
Digital Audio Out
Cinch (yellow)
Cinch (white/red)
1 coaxial, 1 optical
IEC958 for CDDA/LPCM/MPEG1
IEC1937 for MPEG2, Dolby Digital,
and DTS
Dimensions (w x d x h):
17 x 11 x 3 inches
(435 x 286 x 75 mm)
Approximately 6.6 lbs (3.0 kg)
Weight:
AUDIO FORMAT
Digital
Mpeg/ AC-3/ DTS
PCM
compressed Digital
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
24, 32, 56, 64, 96, 128,
256 kbps & variable
bit rate fs, 16, 22.05,
24, 32, 44.1, 48kHz
MP3(ISO 9660)
Analog Sound Stereo
Full decoding of Dolby Digital multichannel surround sound
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 46
46 Limited Warranty
Digital Video Disc Player
90 days Free Product Exchange / 91 days–OneYear Reduced-Cost Exchange
WHO IS COVERED?
BEFORE EXCHANGINGTHE PRODUCT...
You must have proof of the date of purchase to exchange your
product.A sales receipt or other document showing the date that
you purchased the product is considered such proof.
Please check your owner’s manual before exchanging the product.
Adjustments of the controls discussed there may save you time and
money.
WHAT IS COVERED?
LIMITATION OF LIABILITY AND REMEDY...
Warranty coverage begins the day you buy your product. For 90 days MAGNAVOX IS NOT LIABLE UNDER ANY CIRCUMSTANCES
thereafter, you may exchange the defective product for a free new or FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
renewed product through Magnavox.
CONSEQUENTIAL DAMAGES, HOWSOEVER INCURRED, EVEN
IF NOTIFIED OFTHE POSSIBILITY OF SUCH DAMAGES.
TOTHE EXTENT PERMITTED BY LOCAL LAW,THE REMEDIES
PROVIDED INTHISWARRANTY STATEMENT AREYOUR SOLE
AND EXCLUSIVE REMEDY.
From 91 days to one year from the date of purchase, you will pay a
preset exchange fee to obtain a new or renewed product. Follow
the exchange procedures on the next page.This exchange
opportunity ends one year after the date of purchase.The
replacement product is covered only for the warranty period of the
THIS LIMITEDWARRANTY GIVESYOU SPECIFIC LEGAL
original product.When the warranty on the original product expires, RIGHTS,ANDYOU MAY ALSO HAVE OTHER RIGHTSWHICH
the warranty on all replaced products also expires.
VARY FROM STATE/PROVINCETO STATE/PROVINCE.
When it is necessary for you to ship the product to Magnavox for
exchange, you will pay the shipping costs for shipment to Magnavox.
Magnavox will pay the shipping costs when returning a product to you.
TO EXCHANGEYOUR PRODUCT INTHE U.S.A.,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
FOLLOWTHE INSTRUCTIONS STATED PREVIOUSLY INTHE
“WHAT IS COVERED” SECTION, OR REFERTOTHE
EXCHANGE INSTRUCTIONS ONTHE NEXT PAGE.
INTHE U.S.A., PUERTO RICO,AND U.S.VIRGIN ISLANDS,ALL
IMPLIEDWARRANTIES, INCLUDINGTHE IMPLIEDWARRANTIES
OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE,ARE SPECIFICALLY DISCLAIMED,
ANDTOTHE EXTENT INCONSISTENTWITH LAW OFTHE
LOCALITY OFTHE USER, LIMITED IN DURATIONTOTHE
DURATION OFTHIS EXPRESSWARRANTY. BECAUSE SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIEDWARRANTY MAY LAST,THIS LIMITATION MAY NOT
APPLYTOYOU.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
•
shipping charges to return defective product.
labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair
of antenna systems outside of the product.
•
•
product repair and/or part replacement because of improper
installation, abuse, neglect, misuse, accident, unauthorized repair
or other cause not within the control of Magnavox.
a product that requires modification or adaptation to enable it
to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
TO EXCHANGE A PRODUCT IN CANADA...
Please contact Magnavox at:
•
•
incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or
consequential damages, so the above exclusion may not apply to
you.This includes, but is not limited to, prerecorded material,
whether copyrighted or not copyrighted.)
a product used for commercial or institutional purposes
(including but not limited to rental purposes).
1-800-705-2000
In Canada, this warranty is given in lieu of all other warranties.There
are no other warranties, express or implied, including any implied
warranties of merchantability or fitness for a particular purpose.
REMEMBER...
Please record below the model and serial numbers found on the
product.Also, please fill out and mail your warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL #__________________________________
SERIAL #__________________________________
WHERE IS EXCHANGE AVAILABLE?
Warranty exchange is available in all countries where the product is
officially distributed by Magnavox. In countries where Magnavox does
not distribute the product, the local Magnavox service organization
will attempt to exchange the product, although there may be a delay
if the appropriate product is not readily available.
MAKE SUREYOU KEEP...
Please keep your sales receipt or other document showing proof of
date of purchase.Attach it to the owner’s manual and keep both
nearby.Also keep the original box and packing material in case you
need to return your product.
Magnavox, P.O. Box 520890, Miami, FL 33152 (402) 536-4171
EL6505E002 /2-02
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 47
Limited Warranty (cont’d) 47
EXCHANGE INSTRUCTIONS
To exchange your product with Magnavox (per the warranty conditions stated previously), remember:
•
•
If you exchange the product within 90 days of the original purchase, there is no cost to you.*
If you exchange the product more than 90 days after but less than one year after the day of original purchase, contact Magnavox
at 1-800-705-2000 to determine the preset cost for exchange.
•
If you do not have your original sales receipt, or if you have any questions, call Magnavox at 1-800-705-2000.
To obtain a replacement product from Magnavox:
1. Contact Magnavox at 1-800-705-2000 to determine the cost for exchange.
2. Complete the Exchange Form below.
3. Pack the product and its accessories in the original box or a suitable alternative.You will receive replacement accessories with
your replacement product. For packing details, call Magnavox at 1-800-705-2000.
4. Put the completed Exchange Form, a copy of the original sales receipt, and the proper payment amount into an envelope. DO
NOT SEND CASH. Do not staple or clip these items together. Label the envelope “Return Documents Enclosed.” Place this
envelope in the box with the product.
5. Seal the box with packing tape and return the product via United Parcel Service (UPS), insured and freight prepaid, to:
Magnavox Recovery Center
Rojas 6
12420 Mercantile Avenue
El Paso,TX 79928
ATTENTION: DVD PLAYER EXCHANGE
A replacement will be sent to you via UPS within 48 business hours of Magnavox’ receipt of the product.
*When it is necessary for you to ship the product to Magnavox for exchange, you will pay the shipping costs for shipment to Magnavox. Magnavox
will pay the shipping costs when returning a product to you.
EXCHANGE FORM
Your Address (street address to which replacement should be delivered, no P.O. boxes allowed):
Name:
Street Address:
City:
Phone (day):
Apt. #:
State/Province:
Phone (night):
Zip Code/Postal Code:
Exchange Fee:
+ SalesTax:
= Total:
Method of Payment: (Check one. Please, no cash or CODs.)
_____ Check/Money order
Check/Money order No.
Account number
Expiration date
__________
__________
__________
__________
_____ American Express
_____ Visa
_____ Novus/Discover
_____ Mastercard
___________________________
___________________________
___________________________
___________________________
Signature: _____________________________________________________________
Detailed reason for return, use additional paper if necessary: _____________________________________________
_______________________________________________________________________________________________
Model Number
Serial Number
Remember, the return box should include the following:
•
•
The product,
Completed Exchange Form and sales receipt,
•
•
Accessories supplied with the product, and
Payment, if applicable.
Download from Www.Somanuals.com. All Manuals Search And Download.
MDV450 25/09/2002 9:46 AM Page 48
48 Information Index
AC power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
ANGLE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 22 PAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 36
Arrow 341 2 buttons . . . . . . . . . . . . . . . . . . . . . .16, 19-20 Parental controls disc lock . . . . . . . . . . . . . . . . . . . . . . . . .28
AUDIO button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 24 Parental controls levels . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Audio CD program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Parental controls password . . . . . . . . . . . . . . . . . . . . . . . .27
AUDIO OUT (left/right) jacks . . . . . . . . . . . . . . . . .10-13, 18 PAUSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 21
PCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Battery installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 PICTURE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 34
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35
Camera angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 PLAY button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-16
Chapter selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 PLAY/PAUSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
COAXIAL jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 18 POWER button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17
Color systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Preview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Contents, table of . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PREVIEW button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 31
PREV(ious) button . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 19
Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Previous 4 button . . . . . . . . . . . . . . . . . . . . . . . . . .16, 19
DISC MENU button . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 19
Disc menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Quick disc playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Disc tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 17
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 RAW SPDIF setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
DISPLAY button . . . . . . . . . . . . . . . . . . . . . . . . .16, 19, 21, 37 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Display dim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Region codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Downmix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Remote control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Dynamic Range Control (D.R.C.) . . . . . . . . . . . . . . . . . . . .37 Remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Environmental information . . . . . . . . . . . . . . . . . . . . . . . . . .6 REPEAT button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 23
Exchange instructions/exchange form . . . . . . . . . . . . . . . . .47 Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
REPEAT A-B button . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 23
Fast forward and fast reverse . . . . . . . . . . . . . . . . . . . . . . .20 RETURN/TITLE button . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Frame-by-frame playback . . . . . . . . . . . . . . . . . . . . . . . . . .21 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Safety symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Screen saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Smart navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Helpful hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43 Smart picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 34-35
Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14 SPDIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Determining the best possible connection . . . . . . . . . . .9 Speaker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
TV has a yellow CVBS video in jack . . . . . . . . . . . . . . .10 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
TV has an S-video in jack . . . . . . . . . . . . . . . . . . . . . . .11 Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
TV has component video in jacks . . . . . . . . . . . . . . . . .12 STOP button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connecting to a TV and a two-channel stereo . . . . . . .13 Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Connecting to a TV and a stereo receiver . . . . . . . . . . .14 SUBTITLE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 25
S-VIDEO (video out) jack . . . . . . . . . . . . . . . . . . . .11, 18, 34
JPEG files and features . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 SYSTEM MENU button . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Language settings
3D sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
DVD audio language . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
DVD disc menu language . . . . . . . . . . . . . . . . . . . . . . .26 Title menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
DVD player on-screen display language . . . . . . . . . . . . .39 Track selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
DVD subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . .25 TV display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47 TV type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
LPCM 96K setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
VFD DIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
MP3 files and features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 VIDEO (video out) jack . . . . . . . . . . . . . . . . . . . . . . . .10, 18
MUTE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-35
Video Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Next ¢ button . . . . . . . . . . . . . . . . . . . . . . . . . .16-17, 19
NTSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 36 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-47
Number buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 19
Y CB CR (video out) jacks . . . . . . . . . . . . . . . . . . . .12, 18, 34
OK button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
OPEN/CLOSE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
OPTICAL jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14, 18 ZOOM button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 22
3141 015 22280
Printed in China
This owner’s manual is made of recyclable materials.
Remember to recycle!
IB8346E003
Download from Www.Somanuals.com. All Manuals Search And Download.
|