DVD
DVD-622
DVD-612
Video Player
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
English -------------------------------------------------------- 5
Français------------------------------------------------------23
Deutsch -----------------------------------------------------41
Español ------------------------------------------------------59
Italiano-------------------------------------------------------77
Português ---------------------------------------------------95
∂ÏÏËÓÈο-------------------------------------------------- 113
Polski------------------------------------------------------- 132
Turkish----------------------------------------------------- 165
3
INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
The region code for this set is 2.
Laser safety
2
Since it is usual for DVD movies to be released at
different times in different regions of the world,
all players have region codes and discs can have an optional
region code. If you load a disc of a different region code to
your player, you will see the region code notice on the
screen.The disc will not playback, and should be unloaded.
This unit employs a laser. Due to possible eye injury, only a
qualified service person should remove the cover or
attempt to service this device.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THANTHOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE.
NOTE:
PICTURES SHOWN MAYBE DIFFERENT
BETWEEN COUNTRIES.
LASER
Type
Wave length
Semiconductor laser GaAlAs
650 nm (DVD)
NEVER MAKE OR CHANGE CONNECTIONS
WITHTHE POWER SWITCHED ON.
780 nm (VCD/CD)
7 mW (DVD)
Output Power
10 mW (VCD/CD)
60 degree
Beam divergence
CAUTION
(WARNING LOCATION: ONTHE BACKPLATE
OF SET)
Manufactured under license from Digital Theater Systems,
Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. “DTS” and “DTS DIGITAL SURROUND”
are trademarks of Digital Theater Systems, Inc. © 1996
Digital Theater Systems, Inc. All rights reserved.
CAUTION
VISIBLE AND INVISIBLE LASER RADIATION WHEN
OPEN AVOID EXPOSURETO BEAM
ADVARSEL
SYNLIG OG USYNLIG LASERSTRÅLINGVED ÅBNING
UNDGÅ UDSÆTTELSE FOR STRÅLING
VARNING
SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR
DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO!
The DVD-VIDEO player is in conformity
with the EMC directive and low-voltage
directive.
AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA
NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO
SÄTEESEEN
VORSICHT
TruSurround and the SRS symbol are trademarks of SRS
Labs., Inc.TruSurround technology is manufactured under
license from SRS Labs., Inc.
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
WENN ABDECKUNG GEÖFFNET NICHT DEM
STRAHL AUSSETSEN
ATTENTION
RAYONNEMENT LASERVISIBLE ET INVISIBLE EN CAS
D’OUVERTURE EXPOSITION DANGEREUSE AU
FAISCEAU
For Customer Use:
Read carefully the information located at the bottom of
your DVD-VIDEO player and enter below the Serial
No.Retain this information for future reference.
Model No. DVD-VIDEO
Serial No. __________________________
4
GENERAL INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction
Philips DVD-Video Introduction ------------------------- 6
Unpacking ---------------------------------------------------- 6
Remote Control Battery Installation ------------------- 6
Environmental Information ------------------------------- 6
Safety Information ------------------------------------------ 6
Cleaning Discs ---------------------------------------------- 6
Functional Overview
Front and Rear Panels ------------------------------------- 7
Remote Control -------------------------------------------- 8
Preparation
General Notes ---------------------------------------------- 9
Connecting to aTV ---------------------------------------- 9
Connecting to Optional Equipment----------------- 9-10
NTSC/PAL Settings----------------------------------------10
NTSC/PAL Conversion-----------------------------------10
General Explanation --------------------------------------10
Initial Setup -------------------------------------------------11
Menu Bar/StatusWindow --------------------------------11
Temporary Feedback Field Icons -----------------------12
Personal Preferences----------------------------------12-13
Operation
Loading Discs-----------------------------------------------14
Playing a DVD-Video andVideo CD Disc -------------14
General Features --------------------------------------14-16
Special DVD Features-------------------------------------16
SpecialVCD & SVCD Features--------------------------17
Playing an Audio CD --------------------------------------17
FTS Programme----------------------------------------17-18
MP3 Disc Features ----------------------------------------18
Access Control
Access Control: Child Lock -----------------------------19
Access Control: Parental Control ------------------19-20
Before Requesting Service
Before Requesting Service -------------------------------21
Specifications
Specifications -----------------------------------------------22
5
CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Philips DVD-Video
Introduction
Remote Control Battery
Installation
Your Philips DVD-Video player will playback digital video
discs conforming to the universal DVD-Video standard.The
unique features of DVD-Video, such as selection of sound
track, subtitle languages and different camera angles (disc
dependent), are all supported.
¶
Insert batteries as indicated inside the battery
compartment.
Caution: Do not mix old and new batteries. Never
mix different types of batteries (standard, alkaline,
etc.)
In addition to DVD-Video discs, you will be able to playback
allVideo CDs, SVCDs and Audio CDs.
-
+
DVD-Video
You will recognise DVD-Video discs by the logo shown.
Depending on the material on the disc (a movie, video clips,
a drama series, etc.) the disc may have one or moreTitles.
+
-
DVD-VIDEO DISC
TITLE 1
TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2
CHAPTER 3
Environmental Information
¶
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company. Please
observe the local regulations regarding the disposal of
packaging materials, exhausted batteries and old equipment.
Video CD
You will recogniseVideo CDs by the logo
shown.
SuperVideo CD (SVCD)
Safety Information
Do not expose the system to excessive moisture, rain, sand
or heat sources.
Place the player on a firm, flat surface.
Keep the player away from domestic heating equipment
and direct sunlight.
SVCD discs based on the SuperVCD IO Standard refering
to Standard of Electronics Industry of the People’s Republic
of China.
¶
¶
¶
Audio CD
Audio CDs contain music tracks only.
You will recognise Audio CDs by their logo
shown.
¶
¶
In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
If the DVD-Video player cannot read CDs/DVDs correctly,
use a commonly available cleaning CD/DVD to clean the
lens before taking the DVD-Video player to be repaired.
Other cleaning methods may destroy the lens.Always keep
the tray closed to avoid dust on the lens.
MP3 (MPEG Audio Layer-3) (DVD622 only)
This player supports MP3 which contains compressed
music tracks.
¶
The lens may cloud over when the DVD-Video player is
suddenly moved from cold to warm surroundings. Playing a
CD/DVD is not possible then. Leave the power on for
about one hour with no disc in the unit until normal
playback is possible.
Note:
– Only the first session of multisession discs is supported
Unpacking
First check and identify the contents of your DVD-Video
player package.
You should have the following items.
– DVD-Video player
– Remote Control with batteries
– Audio cable
– SCART cable
Cleaning Discs
¶
¶
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the centre out, in a straight line.
Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for analog
discs.
– Instructions for use
If any item is damaged or missing, contact your retailer or
Philips.
Keep the packaging materials for future transportation.
6
INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Overview
Front and Rear Panels
STANDBY-ON
; PAUSE
– switches the player to Standby mode or ON
– to interrupt playback
DISPLAY
B PLAY
– shows the current status of the player
– to start playback
9 STOP
– to stop playback
DVD622
S PREV
– go to previous chapter or track
/ OPEN/CLOSE
– opens/closes the disc tray
SOUND
– selects Stereo, Dolby Surround or
3D Sound (TruSurround)
Disc Tray
T NEXT
– go to next chapter or track
TV OUT (TV)
MAINS (AC Power)
– connect to TV with SCART
– connect to power source
VIDEO OUT (CVBS)
COAXIAL (Digital audio out jack)
– connect to TV with CVBS video inputs
– connect to digital (coaxial) equipment
AUDIO OUT (Left/Right)
– connect to amplifier, receiver or stereo
system
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
TV OUT
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
Caution: Do not touch the inner pins of the jacks on the rear panel connectors. Electrostatic discharge may
cause permanent damage to the unit.
7
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER B
– switches DVD ON or to standby/
on mode
RETURN / RESUME
– go back to previous menu / to
continue playback after play
was stop
0-9 numerical key pad
– to select numbered items in a
menu
DISC MENU
– access menu of a DVD disc
DISPLAY
– displays bit rate indicator during
playback
1 2 3 4
– (left/right/up/down) to select
an item in the menu
OK
SYSTEM MENU
– access or remove player’s system
menu
– acknowledge menu selection
S
– search backward* / go to a
previous chapter or track
T
– search forward* / next chapter
or track
STOP ( 9 )
– to stop playback
SUBTITLE
– subtitle language selector
PLAY ( B )
– to start playback
ANGLE
– select DVD camera angle
PAUSE ( ; )
– pause playback temporarily /
frame-by-frame playback
ZOOM
– enlarge video image
AUDIO
– audio language selector
REPEAT
– repeat chapter, track, title, disc
REPEAT (A-B)
– repeat a specific segment
SHUFFLE
– playback tracks in random
order
SCAN
– playback of the first 10 seconds
of each track/chapter within a
disc
* Press key for about 2 seconds
8
FUNCTIONAL OVERVIEW
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
General Notes
Connecting to Optional
Equipment
¶
¶
¶
Depending on yourTV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
Please refer to the manuals of yourTV,VCR, Stereo System
or other devices as necessary to make the best
connections.
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
1 Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio cable
(A).
For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or A/V equipment. See ‘Connecting to optional
equipment’.
Note:
Caution:
– You cannot use the MP3 function with the digital out
connectors.
– Make sure the DVD player is connected directly
to theTV. Set theTV to the correct video input
channel.
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
A/V receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 and
DTS)
– Do not connect the player’s audio out jack to
the phono in jack of your audio system.
– Do not connect your DVD-player via yourVCR.
The DVD image could be distorted by the copy
protection system.
1 Connect the player’s digital audio out jack (coaxial F) to the
corresponding in jack on your amplifier. Use an optional
digital (coaxial F) audio cable.
Connecting to a TV
Make one of the following connections, depending on the
capabilities of your existing equipment.
¶
2 You will need to activate the player’s digital output (see
‘Personal Preferences’).
1 Connect the SCART to the corresponding connector on
theTV using the SCART cable supplied (Z).
Digital Multi-channel sound
If yourTV is not equipped with a SCART you can select
one of the following alterative connections:
Digital multi-channel connection provides the best sound
quality. For this you need a multi-channel A/V receiver that
supports one or more of the audio formats supported by
your DVD player (MPEG 2, Dolby Digital™ and DTS).
Check the receiver manual and the logos on the front of
the receiver.
Video CVBS connection
1 Connect the (CVBS) VIDEO OUT jack on the DVD player
to the video in jack on theTV using an optional video cable
(X).
AMPLIFIER
2 Connect the Left and Right AUDIO OUT jacks of the DVD
player to the audio left/right in jacks on theTV (A).
TV
TV
A
F
X
Z
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
TV OUT
A
X
Z
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
TV OUT
R
L
(CVBS)
COAXIAL
AUDIO OUT
VIDEO OUT
9
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
General Explanation
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
About this manual
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
– To see the selected audio format of the current DVD in the
StatusWindow, press SYSTEM MENU or Audio.
This manual gives the basic instructions for operating the
DVD player. Some DVDs require specific operation or
allow only limited operation during playback which may not
respond to all operating commands.When this occurs, the
symbol Ä appears on theTV screen, indicating that the
operation is not permitted by the player or the disc.
NTSC/PAL Settings
Remote control operation
You can switch the NTSC/PAL setting of the DVD player to
match the video signal of yourTV.This setting only affects
the television’s on-screen display that shows the stop and
setup modes.You may select either NTSC or PAL.To
change the DVD player setting to PAL or NTSC, follow the
steps below.
¶
Unless stated, all operations can be carried out with the
remote control.Always point the remote control directly at
the player, making sure there are no obstructions in the
path of the infrared beam.
Corresponding keys on the front panel of the player can
also be used.
1 Unplug the DVD player from the mains.
Menu bar operation
2 Press and hold 9and T, on the front of the DVD player.
While holding 9and T, plug in the mains.
¶
A number of operations can be carried out via the menu
bar on the screen.The menu bar can be accessed by
pressing the cursor keys on the remote control.
Pressing SYSTEM MENU while the menu bar is displayed
will clear the menu bar from the screen.
The selected item will be highlighted and the appropriate
cursor keys to operate will be displayed below the icon.
< or > indicates that more items are available at the left/
right of the menu bar. Press 1or 2to select these items.
3 After PAL or NTSC appears on the display panel of the
DVD player, release 9and T, at the same time.The PAL
or NTSC that appears on the display panel indicates the
current setting.
4 To change the setting, press T, within three seconds.The
new setting (PAL or NTSC) will appear on the display
panel.
¶
¶
¶
NTSC/PAL Conversion (DVD622
only)
This player is equipt. with NTSC/PAL conversion feature to
convert the video output of the disc to match with yourTV
system.The conversion supported are as per below.
Disc
Output format
Selected mode
Type
Format
NTSC
PAL
AUTO
NTSC
PAL
NTSC
PAL
NTSC
DVD
VCD
Not
Supported
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
PAL
NTSC
PAL
1 In the Preference Menu, select TV System.
2 Press 3or 4to select PAL, NTSC or AUTO.
Notes:
– AUTO can only be selected when using aTV that has both
the NTSC and PAL systems.
– This is applicable for CVBS output on cinch and SCART only
– Slight picture distortions may occur due to this conversion.
This is normal.Thus, the AUTO format is most suitable for the
best picture quality.
10
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Shape
Initial Setup (Virgin Mode)
If you have a wide screen (16:9)TV, select 16:9.
If you have a regular (4:3)TV, select 4:3.
General
If you have a 4:3TV, you can also select between:
Letterbox for a ‘wide-screen’ picture with black bars top
and bottom, or Pan Scan, for a full-height picture with the
sides trimmed. If a disc supports the format, the picture will
be shown accordingly.
In ‘Initial Setup’ you may have to set your preferences for
some of the player’s features. (not applicable for all models)
Operation
After switching on the player for the very first time, the
‘Initial Setup Screen’ will appear.
The menu for the first item to be set is displayed and the
first option is highlighted.
Country
Select your country.This is used as input for the ‘Parental
Control’ feature (see ‘Access Control’).
Note:
¶
¶
Use the 43keys to go through the options in the menu.
The icon of the selected option will be highlighted.
Use OK to confirm your selection and to go to the next
menu.
– All these items may have to be set during ‘Initial Setup’.
After that, they can always be changed in the Personal
Preferences Menu.
Note:
– Preferences have to be set in the order of which the item
menus will appear on the screen.
– The ‘Initial Setup’ screen will only disappear after the
settings for the last item have been confirmed.
– If any keys other than 43or OK are pressed, Ä will
appear on the screen.
– If the player is switched off while setting personal
preferences, all preferences have to be set again after
switching the player on again.
Menu Bar/Status Window
As there are multiple menu-bars, the items on the menu-
bar are arranged according to usage, availability of direct
access keys. Pressing the SYSTEM MENU keys once will
toggle through menu-bar-1, menu-bar-2, menu-bar-3 and
OFF.
Menu-bar-1
Personal Preferences
Subtitle Language
Audio Language
Colour
The following items may have to be set in Initial
Setup:
Menu language
You can choose from different languages.The On Screen
Menus will be displayed in the language available on the
player.
Sound
Menu-bar-2
Step
Audio language
Slow motion
Fast motion
Angle
You can choose from different languages. If available on the
disc, the player will play the audio in the selected language.
If the selected language is not available, speech will revert
to the first spoken language on the disc.
Zoom
Subtitle language
Menu-bar-3
You can choose from different subtitle languages. If available
on the disc, subtitles will be in the language choosen. If the
selected language is not available, subtitles will revert to the
first subtitle language on the disc.
Title
Chapter
Time Search
FavouriteTrack Selection (FTS)
11
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
– TV Shape
Temporary Feedback Field
Icons
See ‘Initial Setup’
Scan
– Black level shift (NTSC only)
Repeat All
Select ON for adapting the colour dynamics to obtain
richer contrasts.
RepeatTitle
RepeatTrack
Repeat Chapter
Shuffle
Shuffle Repeat
Repeat A to end
Repeat A-B
Angle
– Video shift
The factory centres the video on your screen. Use this
setting to personalize the position of the picture on your
TV by scrolling it to the left or right.
Child Lock On
Child Safe
Resume
Action prohibited
– Colour settings (DVD622 only)
You can select one of five predefined sets of colour settings
and one set (Personal) which you can define yourself.
Personal Preferences
You can set your own personal preferences on the player.
General operation:
¶
¶
Press SYSTEM MENU on the remote control.
Select in the menu bar.
➜The Personal Preferences menu appears.
Use the 1 2 3 4keys to toggle through the menus,
submenus and submenu options.
➜ When a menu item is selected, the cursor keys (on the
remote control) to operate the item are displayed next to
the item.
¶
– Personal colour (DVD622 only)
Allows you to fine-tune the selected colour settings
saturation, brightness and contrast.
¶
Press OK to confirm and return to the main menu.
The following items can be adapted:
– TV System
Allows you to select between PAL, NTSC and AUTO
mode depending on yourTV.
12
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Features
– Digital output
– Access Control
Factory setting:ALL.This means coaxial output is on. If you
are not connecting equipment with a digital input, change
the setting to OFF.
If your equipment doesn't include a digital multi-channel
decoder, set the digital output to PCM (Pulse Code
Modulation).
Access Control contains the following features:
Child Lock - When Child Lock is set to ON, a 4-digit code
needs to be entered in order to playback discs.
Parental control - Allows the conditional presentation of
DVDs containing Parental Control information (see ‘Access
Control’).
– StatusWindow
Displays the current status of the player and is displayed
with the menu bar. When disc playback is stopped, it is
displayed with the ‘Temporary Feedback Field’ in the default
screen. See ‘On-Screen Display’ information;
Factory setting is ON. Select OFF to suppress display of the
Status Window.
– Analog output
Select Stereo, Dolby Surround or 3D sound (TruSurround)
to match your system’s playback capability.
– Bit Rate Indicator
When activated, the bit rate for video, audio as well as total
bit rate is displayed.This is only applicable during playback
of DVD and SVCD discs.
– Night Mode
Optimizes the dynamics of the sound for low volume
playback.
– Karaoke vocal
Put this setting to ON only when a multi-channel karaoke
DVD is being played.The karaoke channels on the disc will
then be mixed into a normal stereo sound.
– Help text
When set to ON, help text describes the icons selected.
Select OFF if you no longer require the help text.
Language
– Low Power Standby
Select the required Menu,Audio and Subtitle language. See
‘Initial Setup’.
Audio language and Subtitle language can also be adapted
via the Menu bar on the screen.
If this is set to ON, the player will go in low-power standby
when the standby button is pressed (front panel or remote
control).
– PBC (Playback Control)
The Playback Control can be set to ON or OFF.
13
PREPARATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Loading Discs
General features
Note:
1 Press OPEN/CLOSE on the front of the player to open disc
– Unless stated, all operations described are based on remote
control operation. A number of operations can also be carried
out via the menu bar on the screen.
tray.
2 Load your chosen disc in the tray, label side up.
3 Press OPEN/CLOSE again, to close the tray.
➜ READ appears in the status window and on the player
display, and playback starts automatically.
Moving to another title/chapter
When a disc has more than one title or
chapter, you can move to another title/
chapter as follows:
Press SYSTEM MENU, then select or
in the menu bar.
Note:
– If ‘Child Lock’ is set to ON and the disc inserted is not
authorised, the 4-digit code must be entered and/or the disc
must be authorised (see ‘Access Control’).
¶
¶
Press 3or 4to select a title/chapter.
Note:
Playing a DVD-video and Video
CD disc
– If the number has more than one digit, press the keys in
rapid succession.
Playing a disc
Slow Motion
¶
After inserting the disc
and closing the tray, playback starts
¶
¶
Select (SLOW MOTION) in the menu bar.
Use the 4keys to enter the SLOW MOTION menu.
➜The player will now go into PAUSE mode.
Use the cursor keys 12to select the required speed: -1, -
1/2, -1/4 or -1/8 (backward), or +1/8, +1/4, +1/2 or +1
(forward).
Select 1 to play the disc at normal speed again.
If ;is pressed, the speed will be set to zero (PAUSE).
To exit slow motion mode, press Band 3.
automatically and the status window of the player display
shows the type of disc loaded, as well as disc’s information
and playing time.
The disc may invite you to select an item from a menu. If
the selections are numbered, press the appropriate
numerical key; if not, use the 3/4, 1/2keys to highlight
your selection, then press OK.
The currently playing title and chapter number are
displayed.
Playback may stop at the end of theTitle, and then may
return to the DVD menu.To go on to the next title, press
B.
¶
¶
¶
¶
¶
¶
¶
Still Picture and Frame-by-frame playback
¶
¶
Select (STEP) in the menu bar.
Use the 4key to enter the picture by
picture menu.
➜The player will now go into PAUSE
mode.
Use the cursor keys 12to select the previous or next
picture frame.
To exit STEP mode, press Bor 3.
¶
¶
To stop playback, press 9.
➜The default screen will appear, giving information about
the current status.
You can resume playback from the point at which you
stopped playback. Press B; when you see the Resume icon
.on the screen, press Bagain.
➜The RESUME feature applies not only to the disc in the
player, but also to the last four discs you have played. Simply
reload the disc and press RESUME on the remote control
or, press Bwhen you see the Resume icon .on the
screen, then press Bagain.
¶
¶
You can also step forward by pressing ;repeatedly on the
remote control.
Scan
Note:
Scanning plays the first 10 seconds of each
chapter/index on the disc.
Press SCAN.
To continue playback at your chosen track, press SCAN
again or press B.
– DVDs may have a region code.Your player will not play
discs that have a region code different from the region code of
your player.
¶
¶
14
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Search
Time search
TheTime Search function allows you to start playing at any
chosen time on the disc.
Select (TIME SEARCH) in the menu bar.
Press 4.
➜The player will now go into PAUSE mode.
➜ A time edit box appears on the screen, showing the
elapsed playing time of the current disc.
Use the digit keys to enter the required start time. Enter
hours, minutes and seconds from left to right in the box.
➜ Each time an item has been entered, the next item will
be highlighted.
¶
¶
¶
Select (FAST MOTION) in the menu
bar.
Use the 4keys to enter the FAST
MOTION menu.
Use the 12keys to select the required speed: -32, -8 or -4
(backward), or +4, +8, +32 (forward).
Select 1 to play the disc at normal speed again.
To exit FAST MOTION mode, press Bor 3.
¶
¶
¶
¶
¶
¶
To search forward or backward through different speeds,
you can also hold down Sor T.
Press OK to confirm the start time.
➜The time edit box will disappear and playback starts
from the selected time position on the disc.
Repeat
DVD-Video Discs - Repeat chapter/
title/disc
¶
¶
To repeat the currently playing chapter,
press REPEAT.
➜ REPEAT CHPT appears on the player display.
To repeat the title currently playing , press REPEAT a
second time
Zoom
➜ REPEAT TITL appears on the display.
To repeat the entire disc, press REPEAT a third time
➜ REPEAT appears on the display.
To exit Repeat mode, press REPEAT a fourth time.
¶
¶
The Zoom function allows you to enlarge the video image
and to pan through the enlarged image.
Select (ZOOM).
Press 3/4to activate the ZOOM function and select the
required zoom factor: 1.33 or 2 or 4.
➜The player will go into Pause mode.
➜The selected zoom factor appears below the Zoom icon
in the menu bar and ‘Press OK to pan’ appears below the
menu bar.
➜The picture will change accordingly.
Press OK to confirm the selection.
➜The panning icons appear on the screen.
Use the 1234keys to pan across the screen.
When OK is pressed only the zoomed picture will be
shown on the screen.
¶
¶
Video CDs - Repeat track/disc
¶
¶
¶
To repeat the track currently playing , press REPEAT.
➜ REPEAT TRK appears on the player display.
To repeat the entire disc, press REPEAT a second time.
➜ REPEAT appears on display and screen.
To exit Repeat mode, press REPEAT a third time.
¶
Repeat A-B
¶
¶
To repeat a sequence in a title:
Press REPEAT A-B at your chosen starting
point;
➜ A- appears briefly on the screen.
Press REPEAT A-B again at your chosen end point;
➜ REPEAT A-B appears briefly on the display, and the repeat
sequence begins.(REPEAT A-B is displayed on the front panel
of the player)
¶
¶
¶
To exit ZOOM mode:
– Press B to resume playback.
¶
To exit the sequence, press REPEAT A-B.
Shuffle
DVD-Video discs
This shuffles the playing order of chapters
within a title, if the title has more than one
chapter.
¶
¶
Press SHUFFLE during playback.
➜ SHUFFLE appears on the screen for about 2 seconds.
To return to normal playback, press SHUFFLE again.
Video CDs
¶
¶
Press SHUFFLE during playback.
➜ SHUFFLE appears on the screen for about 2 seconds.
To return to normal playback, press SHUFFLE again.
15
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
FTS-Video
Special DVD features
¶
The FTS-Video function allows you to store your favourite
titles and chapters (DVD) and favourite tracks and indexes
(VCD) for a particular disc in the player memory.
Checking the contents of DVD-Video discs:
Menus
¶
¶
FTS programme can contain 20 items (titles, chapters).
An programmed FTS will be placed on top of the list when
playback is activated.When the list is full, a new programme
will replace the last programme on the list.
DVDs may contain menus to navigate the disc and access
special features.To use the menu, press the appropriate
numerical key; or use the 4, 3, 2, 1keys to highlight your
selection, then press OK..
¶
The programme can be selected and played at any time.
Title/Disc menu
Storing a FTS-Video Programme
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Press 4to open the menu.
➜The VIDEO FTS menu appears.
¶
Press DISC MENU.
➜ If the current title has a menu, the menu will appear on
the screen otherwise, the disc menu will be displayed.
The menu can list camera angles, spoken language and
subtitle options, and chapters for the title.
¶
Press 2or 1or FTS to select ON or OFF.
¶
¶
Storing titles/tracks
To remove the title menu, press DISC MENU again.
¶
¶
¶
Press 4to select TITLES.
Use 2and 1to select the required title.
Press OK if you wish to store the entire title.
➜The title number will be added to the list of selections.
Camera Angle
If the disc contains sequences recorded from different
camera angles, the angle icon appears, showing the number
of available angles and the angle being shown currently.You
can then change the camera angle if you wish.
Use the 3/4keys to select the required angle icon.
➜ After a while, playback changes to the selected angle.The
angle icon remains displayed until multiple angles are no
longer available.
¶
Storing chapters/indexes
¶
Press 4on the selected title number.
➜The title number will be marked and the highlight moves
to the first available chapter number for this title.
Use 2and 1to select the required chapter number.
Press OK to confirm the selection.
➜The title/chapter selection will be added to the list of
selections.
¶
¶
Changing the audio language
¶
¶
Select Y (AUDIO) in the menu bar.
Press Y or 3/4repeatedly to see the different languages.
¶
Press SYSTEM MENU to exit the VIDEO FTS c menu.
Erasing a FTS-Video Programme
¶
¶
¶
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Use 4to select PROGRAM.
Use 2and 1to select the required selection number.
Press OK to erase the selection.
Subtitles
Press SYSTEM MENU to exit.
¶
¶
Select Z (SUBTITLE) in the menu bar.
Press Z or 3/4repeatedly to see the different subtitles.
If you wish to erase all selections:
¶
¶
¶
In STOP mode, select VIDEO FTS c in the menu bar.
Use 4to select CLEAR ALL.
Press OK.
➜ All selections will now be erased.
Press SYSTEM MENU to exit.
¶
16
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving to another track
Special VCD & SVCD features
¶
Press Sor Tbriefly during playback to go to the
next or to return to the beginning of the current track.
Press Stwice briefly to step back to the previous track.
To go directly to any track, enter the track number using
the numerical keys (0-9).
Playback Control (PBC)
¶
¶
¶
¶
Load aVideo CD with PBC and press B.
Go through the menu with the keys indicated on theTV
screen until your chosen passage starts to playback. If a
PBC menu consists of a list of titles, you can select a title
directly.
Shuffle
¶
¶
¶
Enter your choice with the numerical keys (0-9).
Press RETURN to go back to the previous menu.
You may also set to PBC OFF under Personal
Preferences.
¶
¶
Press SHUFFLE during playback.
➜The order of the tracks is changed.
To return to normal playback, press
SHUFFLE again.
Repeat track/disc
Playing an audio CD
¶
To repeat the track currently playing ,
press REPEAT.
➜ REPEAT TRK appears on the display.
To repeat the entire disc, press REPEAT a second time.
➜ REPEAT appears on the display.
¶
¶
¶
After loading the disc, playback starts automatically.
If theTV is on, the Audio CD screen appears.
The number of tracks and the total playing time will be
shown on the screen.
During playback, the current track number and its elapsed
playing time will be shown on the screen and on the player
display.
¶
¶
¶
To exit Repeat mode, press REPEAT a third time.
Repeat A-B
¶
¶
Playback will stop at the end of the disc.
To stop playback at any other time, press 9.
To repeat a sequence:
¶
¶
¶
Press REPEAT A-B at your chosen starting
point;
➜ A- appears on the player display.
Press REPEAT A-B again at your chosen end point;
➜ A-B appears on the display, and the sequence begins to
playback repeatedly.
To exit the sequence, press REPEAT A-B again.
Scan
Scanning plays the first 10 seconds of each
track on the disc.
Pause
¶
¶
Press ;during playback.
To return to playback, press B.
¶
¶
Press SCAN.
To continue playback at your chosen track, press SCAN
again or press B.
Search
¶
To search forward or backward through
the disc at four times normal speed, hold
down Sor Tfor about one second
during playback.
➜ Search begins, and sound is partially muted.
To step up to eight times the normal speed, press Sor
Tagain.
FTS Programme
¶
¶
FTS Programme allows you to store your favourite tracks
for a particular disc in the player memory.
Each FTS Programme can contain 20 tracks.
¶
➜ Search goes to eight times the speed, and the sound is
muted.
¶
¶
¶
To return to four times the normal speed, press Sor
Tagain.
If theTV is on, search speed and direction are indicated on
the screen each time Sor Tis pressed.
To end the search, press Bto resume playback or 9to
stop.
17
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Downloading MP3 files from the Internet or ripping songs
from your own legal discs, is a delicate process.
Storing an FTS Programme
1 Load a disc and stop playback.
2 Use 4to go to the list of available tracks.
Approximate total
MP3-CD time
Approximate
Reduction Ratio
Sound
Quality
Comment
Bit Rate
Sound quality significantly affected
– not recommended.
AM radio
32 kbps
64 kbps
40 : 1
20 : 1
15 : 1
10 : 1
5 : 1
40 hrs
20 hrs
15 hrs
10 hrs
5 hrs
3 Use 2or 1to select tracks from the list.
To go directly to any track, enter the track number using
the numerical keys (0-9).
4 Store each track by pressing OK.
➜The track numbers will be added to the list.
➜The number of tracks and the playing time of the
programme will be shown on the screen and the player
display.
FM radio
Near-CD
CD-like
CD*
Balanced sound quality
– compression rate
96 kbps
128 kbps
256 kbps
320 kbps
Compression rate low
– suggest to play CDs instead
CD*
3 : 1
3 hrs
You may experience an occasional “skip” while
listening to your MP3 files.This is normal.
Additional note for MP3 disc Playback:
– In compliance with the SDMI, digital-out is muted
while playing MP3 discs.
– Due to the recording nature of Digital Audio MP3
(DAM),only Digital Audio music will play.
– The disc reading time may exceed 10 seconds due
to the large number of songs compiled into one
disc.
When your FTS Programme is complete, press Bto start
playback, or 3to go back to Stop mode. In either case, the
FTS Programme will be automatically memorized.
Switching FTS ON/OFF
1 Use 34to move to select desired tracks.
2 Use 2or 1to select either ON or OFF.
– Only the first session of multisession discs is
supported.
Erasing a track from an FTS Programme
Album/Title
1 Use 4to go to the list of selected tracks.
This feature allows you to view and select the next or
previous MP3 disc Album/Title.
2 Use 2and 1to select the track number you wish to erase.
3 Press OK.
➜The track number will be erased from the list of selected
1 Press 3/4to scroll through the previous or next Album.
2 Press 1/2to scroll through the previous or nextTrack.
tracks.
Album
Track
Time
Erasing the complete programme
1 Use 4to select CLEAR ALL, then press OK.
➜The complete FTS Programme for the disc will be
erased.
➜
will be displayed.
3 You can also select the desired album/track number directly
from the numerical key pad on the remote control.
MP3 Disc Features (DVD622 only)
Support following MP3-CD formats (ISO9660
format):
Note:
– In STOP mode: numbers are used for ALBUM selection.
– In PLAY mode:numbers are used for TRACK selection.
¶
¶
¶
¶
¶
Max. 30 characters
¶
Only the following modes are possible for MP3 discs;
– STOP / PLAY / PAUSE
– SKIP NEXT / PREVIOUS
Max. nested directory is 8 levels
The max.ALB number is 32
SupportedVBR bit-rate
Supported sampling frequencies for MP3 disc are: 32 kHz,
44.1 kHz, 48 kHz
– REPEAT (ALBUM /TRACK / DISC)
MP3 Discs - Album/Track/Disc
¶
Supported Bit-rates of MP3 disc are: 32, 64, 96, 128, 192,
256 (kbps)
¶
¶
¶
To repeat track, press REPEAT.
➜ REPEAT TRK appears on the display.
To repeat album, press REPEAT a second time.
➜ REPEAT ALBM appears on the player display.
To repeat disc, press REPEAT a third time.
➜ REPEAT DISC appears on the player display.
Following formats can’t be supported
¶
¶
¶
¶
The files like *.WMA, *AAC, *.DLF, *.M3U, *.PLS
Chinese filename
The non-session closed discs
The discs recorded under UDF format
18
OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
Access Control
Access Control; Child Lock
(DVD-Video and Video CD)
Activating/deactivating the child lock
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter a 4-digit code of your own choice.
3 Enter the code a second time.
4 Move to “CHILD LOCK” using the 3/4keys.
5 Move to LOCK/UNLOCK using the 2key.
6 Select LOCK using the 3/4keys.
Deauthorizing discs
7 Press OK or 1to confirm, then press 1again to exit the
¶
¶
Insert the disc. See ‘Loading disc’.
➜ Playback starts automatically.
Press 9while { is visible.
➜The | will appear and the disc is now deauthorized.
menu.
➜ Now unauthorized discs will not be played unless the
4-digit code is entered.
8 Select UNLOCK to deactivate the CHILD LOCK.
Note: Confirmation of the 4-digit code is necessary when:
– The code is entered for the very first time (see above),
– The code is changed (see ‘Changing the 4-digit code’),
– The code is cancelled (see ‘Changing the 4-digit code’).
Access control; Parental
Control (DVD-Video only)
Movies on DVDs may contain scenes not suitable for
children.Therefore, disc may contain ‘Parental Control’
information which applies to the complete disc or to
certain scenes on the disc.These scenes are rated from 1
to 8, and alternative, more suitable scenes are available on
the disc. Ratings are country dependent.The ‘Parental
Control’ feature allows you to prevent discs from being
played by your children or to have certain discs played with
alternative scenes.
Authorizing discs
¶
Insert the disc. See ‘Loading disc’.
➜The ‘child protect’ dialog will appear.
You will be asked to enter your secret code for ‘Playback
Once ‘or ‘Playback Always.’ If you select ‘Playback Once’, the
disc can be played as long as it is in the player and the
player is ON. If you select ‘Playback Always’, the disc will
become child safe (authorized) and can always be played,
even if the Child Lock is set to ON.
Notes:
– The player memory maintains a list of 120 authorized
(‘Child safe’) disc titles.A disc will be placed in the list when
‘Playback Always’is selected in the‘child protect’ dialog.
– Each time a ‘child safe’ disc is played, it will be placed on
top of the list.When the list is full and a new disc is added, the
last disc in the list will be removed from the list.
– Double sided DVDs may have a different ID for each side.
In order to make the disc ‘child safe’, each side has to be
authorized.
– Multi-volumeVCDs may have a different ID for each
volume. In order to make the complete set ‘child safe’, each
volume has to be authorized.
19
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating/Deactivating Parental Control
Changing the 4-digit code
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter your 4-digit code. If necessary, enter the code a
second time.
3 Move to Parental Control using the 3/4keys.
4 Move to VALUE ADJUSTMENT (1-8) using the 2key.
5 Then use the 3/4keys or the numerical keys on the
remote control to select a rating from 1 to 8 for the disc
inserted.
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter the old code.
3 Move to CHANGE CODE using the 4key.
4 Press the 2key.
5 Enter the new 4-digit code.
6 Enter the code a second time and reconfirm by pressing
OK.
7 Press 1to exit the menu.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated.The Disc will be played in
full.
If you forget your 4 digit code
1 Press 9to exit ‘Child Protect’ screen.
Ratings 1 to 8:
2 Select ACCESS CONTROL in the features menu using
The disc contains scenes not suitable for children. If you set
a rating for the player, all scenes with the same rating or
lower will be played. Higher rated scenes will not be played
unless an alternative is available on the disc.The alternative
must have the same rating or a lower one. If no suitable
alternative is found, playback will stop and the 4-digit code
has to be entered.
the 3/4keys.
3 The 4-digit code can be cancelled by pressing 9four times
in the ‘Access Control’ dialog.
4 You can then enter a new code (twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
6 Press OK or 1to confirm, then press 1again to exit the
menu.
This DVD player features the PARENTAL CONTROL
system which is intended to activate when playing DVD
discs furnished with certain software coding.This is
according to technical standards adopted by the set maker
and disc content industries.
Please note that the PARENTAL CONTROL system
will not operate a DVD disc which is not furnished with the
appropriate software coding.Also note that at the time of
release of this DVD player, certain aspects of the technical
standards had not been settled between set makers and
the disc industries.
On this basis Philips cannot guarantee the functioning of
PARENTAL CONTROL system and denies any liability
associated with unintended watching of disc content.
If in doubt, please make sure the disc plays according to
your PARENTAL CONTROL settings before you allow
children access to the player.
Country
1 When disc playback is stopped, select ACCESS
CONTROL in the features menu using the 3/4keys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY using the 4key.
4 Press the 2key.
5 Select a country using 3/4.
6 Press OK or 1to confirm, then press 1again to exit the
menu.
20
ACCESS CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
If it appears that the DVD-Video player is faulty, first consult this checklist. It may be that something has been overlooked. Under
no circumstances attempt to repair the system yourself; this will invalidate the warranty.
Look for the specific symptom(s).Then perform only the actions listed to remedy the specific symptom(s).
Symptom
Remedy
No power
– Make sure the mains cord (AC Power) is properly connected.
– Check if there is power at the AC outlet by plugging in another appliance.
No picture
– Check if theTV is switched on.
– Check the video connection.
Distorted picture
– Check the disc for fingerprints and clean the disc with a soft cloth, wiping
from the centre to the edge in a straight line.
– Sometimes a small amount of picture distortion may appear .This is not a
malfunction.
Completely distorted picture
or no colour with player menu.
– If the picture is distorted completely or if the picture rolls vertically,
make sure the NTSC/PAL setting at the DVD player matches the video
signal of your television.
– If yourTV video signal is NTSC, select the NTSC setting at the DVD player.
– If your video signal is PAL, select the PAL setting - see NTSC/PAL SETTINGS.
Distorted or Black/White picture
with DVD orVideo CD.
– The disc format does not match yourTV’s video signal (PAL/NTSC) - see
NTSC/PAL Conversion.
No sound
– Check audio connections.
– If you are using a HiFi amplifier, try another sound source.
Distorted sound from HiFi
amplifier.
– Check to make sure that no audio connections are made to the amplifier
phono input.
No audio at digital output.
– Check the digital connections.
– Check the settings menu to make sure the digital output is set to ALL or
PCM.
– Check if the audio format of the selected audio language matches your
receiver capabilities.
– Not applicable for MP3
Disc can’t be played.
– Ensure the disc label is facing up.
– Clean the disc.
– Check if the disc is defective by trying another disc.
– Check to see if the disc is defective, badly scratched or warped (not flat)
No return to start-up screen when
disc is removed.
– Reset by switching the player off, then on again.
– Check to see if the programme requires another disc to be loaded.
The player does not respond to
the remote control.
– Aim the remote control directly at the sensor on the front of the player.
– Remove any obstacles between the player and the remote control.
– Inspect or replace the batteries in the remote control.
Buttons do not work.
– In order to completely reset the player, unplug the AC cord from the AC
outlet. (Please ensure that the set is not in Initial Setup mode)
Player does not respond to some
operating commands during
playback.
– Operations may not be permitted by the disc. Refer to the instructions of
the disc.
DVD-Video player cannot read
CDs/DVDs
– Use a commonly available cleaning CD/DVD to clean the lens before
sending the DVD-Video player for repair.
21
Download from Www.Somanuals.com. All Manuals Search AndBDoEwFnOloaRdE. REQUESTING SERVICE
Specification
PLAYBACK SYSTEM
DVD-Video
CONNECTIONS
SCART
Euroconnector
Video CD & SVCD
CD (CD-R and CD-RW)
DVD+RW
Video Output
Audio L+R output
Digital Output
Cinch (yellow)
Cinch (white/red)
1 coaxial
MP3 (DVD622 only)
IEC958 for CDDA / LPCM
IEC1937 for MPEG1/2, Dolby Digital and DTS
OPTICAL READOUT SYSTEM
Lasertype
Semiconductor AlGaAs
CABINET
Numerical Aperture
0.60 (DVD)
Dimensions (w x h x d)
Weight
435 x 81 x 295 mm
Approx. 3.5 Kg
0.45 (VCD/CD)
650 nm (DVD)
780 nm (VCD/CD)
Wavelength
GENERAL FUNCTIONALITY
Stop / Play / Pause
DVD DISC FORMAT
Medium
Diameter
Playing time
(12cm)
Fast Forward / Backward
Time Search
Step Forward / Backward
Slow Motion
Title / Chapter /Track Select
Skip Next / Previous
Optical Disc
12cm (8cm)
One layer
Dual layer
Two side
2.15 h*
4 h*
4.30 h*
Single layer
Two side
Repeat (Chapter /Title / All) or (Track / All)
A-B Repeat
8 h*
Dual layer
Shuffle
Scan
VIDEO FORMAT
DA Converter
Signal handling
New enhanced user graphical interface
Perfect Still with digital multi-tap filter
Zoom (xl.33, x2. x4) with picture enhancement
Smart Picture for convenient personal colour setting (DVD622 only)
PAL/NTSC Conversion (DVD622 only)
Screen Saver (Dim 75% after 15 min.)
3D Sound (TruSurround)
10 bits
Components
MPEG2 for DVD,
MPEG1 forVCD
Digital Compression
TV STANDARD
Number of lines
Playback
(PAL/50Hz)
625
Multistandard
(NTSC/60Hz)
525
(PAL/NTSC)
Virtual Jog Shuttle
Audio and video bit rate indicator
DVD
DVD FUNCTIONALITY
Horiz. Resolution
Vertical Resolution
720 pixels
576 lines
720 pixels
480 lines
Multi-angle Selection
Audio Selection (1 out of max. 8 languages)
Subtitles Selection (1 out of max. 32 languages)
Aspect Ratio conversion (16:9, 4:3 Letterbox, 4:3 Pan Scan)
Parental Control and Disk Lock
Disc Menu support (Title Menu and Root Menu)
Resume (5 discs) after stop / standby
VCD
Horiz. Resolution
Vertical Resolution
352 pixels
288 lines
352 pixels
240 lines
VIDEO PERFORMANCE
Video output
RGB (SCART) output
Black Level Shift
ProgrammingTitles/chapters with Favourite Selection
1Vpp into 75 ohm
0.7Vpp into 75 ohm
On/Off
VIDEO CD FUNCTIONALITY
Playback Control forVCD 2.0 discs
Disc Lock
Video Shift
Left/Right
Resume (5 discs) after stop / standby
ProgrammingTracks with Favourite Selection
AUDIO FORMAT
Digital
MPEG
DTS/Dolby Digital
PCM
Compressed Digital
16, 20, 24 bits
fs, 44.1, 48, 96 kHz
AUDIO CD FUNCTIONALITY
Time Display (Total /Track / RemainingTrackTime)
Full audio functionality with remote control
Programming with FavouriteTrack Selection
Analog Sound Stereo
Dolby Pro Logic downmix from Dolby Digital multi-channel sound
3D Sound (TruSurround) for virtual 5.1 channel sound on 2 speakers
MP3 FUNCTIONALITY (DVD622 only)
Time Display (Track)
AUDIO PERFORMANCE
DA Converter
DVD
24 bits
Album andTrack Selection
Repeat (Disc / Album /Track)
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
100 dB
97 dB
110 dB
88 dB
MPEG Audio L3
Video CD
CD
*
typical playing time for movie with 2 spoken languages and 3 subtitle languages.
Signal-Noise (1kHz)
Dynamic Range (1kHz)
Crosstalk (1kHz)
Distortion and Noise (1kHz)
MPEG MP3
Specifications subject to change without prior notice
22
SPECIFICATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|