Philips DVD Player DCM263 User Manual

Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome  
DCM263  
EN User manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
l Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
1 Important  
m Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus,  
the apparatus has been exposed to rain  
or moisture, does not operate normally,  
or has been dropped.  
Safety  
Important Safety Instructions  
a Read these instructions.  
b Keep these instructions.  
c Heed all warnings.  
d Follow all instructions.  
n Battery usage CAUTION – To prevent  
battery leakage which may result in  
bodily injury, property damage, or  
damage to the unit:  
e Do not use this apparatus near water.  
f Clean only with dry cloth.  
g Do not block any ventilation openings.  
Install in accordance with the  
Install all batteries correctly, + and -  
as marked on the unit.  
Do not mix batteries (old and new  
or carbon and alkaline, etc.).  
Remove batteries when the unit is  
not used for a long time.  
The batteries shall not be exposed  
to excessive heat such as sunshine,  
fire or the like.  
manufacturer’s instructions.  
h Do not install near any heat sources  
such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers)  
that produce heat.  
i Protect the power cord from being  
walked on or pinched, particularly at  
plugs, convenience receptacles, and  
the point where they exit from the  
apparatus.  
o Apparatus shall not be exposed to  
dripping or splashing.  
p Do not place any sources of danger on  
the apparatus (e.g. liquid filled objects,  
lighted candles).  
j Only use attachments/accessories  
specified by the manufacturer.  
q This product may contain lead and  
mercury. Disposal of these materials  
may be regulated due to environmental  
considerations. For disposal or recycling  
information, please contact your local  
authorities or the Electronic Industries  
k Use only with the cart, stand, tripod,  
bracket, or table specified by the  
manufacturer or sold with the apparatus.  
When a cart is used, use caution when  
moving the cart/apparatus combination  
to avoid injury from tip-over.  
r Where the MAINS plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain  
readily operable.  
4
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
must only be mounted on an appropriate wall  
bracket and on a wall that can safely hold the  
weight of the unit. Improper wall mounting  
can result in severe injury or damage. Do not  
attempt to wall mount the unit yourself.  
Caution  
Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
Hearing safety  
Listen at a moderate volume.  
Know these safety symbols  
Using headphones at a high volume can  
impair your hearing. This product can  
produce sounds in decibel ranges that  
may cause hearing loss for a normal  
person, even for exposure less than a  
minute. The higher decibel ranges are  
offered for those that may have already  
experienced some hearing loss.  
Sound can be deceiving. Over time your  
hearing ‘comfort level’ adapts to higher  
volumes of sound. So after prolonged  
listening, what sounds ‘normal’ can  
actually be loud and harmful to your  
hearing. To guard against this, set your  
volume to a safe level before your hearing  
adapts and leave it there.  
This ‘bolt of lightning’ indicates uninsulated  
material within your unit may cause an  
electrical shock. For the safety of everyone  
in your household, please do not remove  
product covering.  
The ‘exclamation mark’ calls attention to  
features for which you should read the  
enclosed literature closely to prevent  
operating and maintenance problems.  
WARNING: To reduce the risk of fire or  
electric shock, this apparatus should not be  
exposed to rain or moisture and objects filled  
with liquids, such as vases, should not be  
placed on this apparatus.  
To establish a safe volume level:  
Set your volume control at a low setting.  
Slowly increase the sound until you can  
hear it comfortably and clearly, without  
distortion.  
Listen for reasonable periods of time:  
Prolonged exposure to sound, even  
at normally ‘safe’ levels, can also cause  
hearing loss.  
CAUTION: To prevent electric shock, fully  
insert the plug. (For regions with polarized  
plugs: To prevent electric shock, match wide  
blade to wide slot.)  
Be sure to use your equipment  
reasonably and take appropriate breaks.  
Be sure to observe the following guidelines  
when using your headphones.  
Warning  
Listen at reasonable volumes for  
reasonable periods of time.  
Never remove the casing of this unit.  
Never lubricate any part of this unit.  
Place this unit on a flat, hard and stable  
surface.  
Be careful not to adjust the volume as  
your hearing adapts.  
Never place this unit on other electrical  
equipment.  
Do not turn up the volume so high that  
you can’t hear what’s around you.  
You should use caution or temporarily  
discontinue use in potentially hazardous  
situations. Do not use headphones while  
operating a motorized vehicle, cycling,  
skateboarding, etc.; it may create a traffic  
hazard and is illegal in many areas.  
Only use this unit indoors. Keep this unit away  
from water, moisture and liquid-filled objects.  
Keep this unit away from direct sunlight, naked  
flames or heat.  
Never look into the laser beam inside the unit.  
Wall mounting of the unit should only be  
performed by qualified personnel. The unit  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice  
Any changes or modifications made to this  
device that are not expressly approved by  
Philips Consumer Lifestyle may void the user’s  
authority to operate the equipment.  
Manufactured under license from Dolby  
Laboratories.  
Dolby, Pro Logic, and the double-D symbol  
are trademarks of Dolby Laboratories.  
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and  
old equipment.  
ABOUT DIVX VIDEO: DivX® is a digital  
video format created by DivX, Inc. This is  
an official DivX Certified device that plays  
information and software tools to convert  
your files into DivX video.  
ABOUT DIVX VIDEO-ON-DEMAND: This  
DivX Certified® device must be registered in  
order to play DivX Video-on-Demand (VOD)  
content. To generate the registration code,  
locate the DivX VOD section in the device  
setup menu. Go to vod.divx.com with this  
code to complete the registration process and  
learn more about DivX VOD.  
DivX® and DivX Ultra® are registered  
trademarks of DivX, Inc., and are used under  
license.  
The making of unauthorized copies of  
copy-protected material, including computer  
programs, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
This apparatus includes these labels:  
HDMI, and HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI licensing LLC.  
Class II equipment symbol  
‘DVD Video’ is a trademark of DVD Format/  
Logo Licensing Corporation.  
This symbol indicates that the apparatus has a  
double insulation system.  
Refer to the type plate at the back of the main  
unit and the bottom of the subwoofer for  
identification and supply ratings.  
6
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
You can play DVD discs with the following  
region codes:  
2 Your DVD  
MicroTheater  
DVD region code  
Countries  
Latin America  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your product  
What’s in the box  
Check and identify the contents of your  
package:  
Introduction  
Main unit  
With this unit, you can:  
Subwoofer  
Composite AV cable  
MP3 LINK cable  
Flat pin adaptor  
Wall mounting screws and dowels  
User Manual  
Quick Start Guide  
Wall mounting instruction sheet  
watch video from DVD/VCD/SVCD/  
DVD+RW or USB  
enjoy audio from discs or USB  
view pictures from discs or USB  
You can enrich sound output with these sound  
effects:  
Digital Sound Control (DSC)  
Dynamic Bass Boost (DBB)  
Bass/treble enhancement  
Dolby Virtual Speakers (Dolby VS)  
The unit supports these media/disc formats:  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Overview of the main unit  
Front view  
a
b
f
MP3 LINK  
DVD/MP3-WMA-CD COMPATIBLE  
e
d
c
a Display panel  
Display current status.  
b Disc compartment  
c
USB socket.  
d MP3 LINK  
Jack for an external audio device.  
e Remote control sensor  
f
Headphone socket.  
8
EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Back view  
g
h
i
j
t
SOURCE  
VOLUME  
VOLUME  
s
r
k
l
m
n
COMPONENT OUT  
Yb/Cb  
q
p
o
SUB  
WOOFER  
OUT  
AV-  
OUT  
DC  
IN  
FM  
ANT  
HDMI  
Y
Yr/Cr  
g
q DC IN  
Power supply socket  
Start or pause play.  
h
/
r VOLUME -/+  
Press and hold for fast backward or  
forward search.  
Skips to the previous or next title,  
chapter or track.  
Adjust volume.  
s
t
Press to open or close the disc  
compartment.  
i
Turn on the apparatus; switch to  
standby mode.  
Stop play.  
Erase a program.  
j SOURCE  
Select a source.  
k Sockets for wall mounting  
l AV OUT  
Socket for audio/video output.  
m HDMI  
HDMI output socket.  
n COMPONENT OUT  
Socket for component video output.  
o SUBWOOFER OUT  
Subwoofer out socket.  
p FM ANT  
FM antenna.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of the subwoofer  
Overview of the remote  
control  
Bottom view  
DISC  
USB  
A-B  
TUNER  
MP LINK  
3
MODE  
DIM  
SLEEP  
TIMER  
DISPLAY  
CLOCK  
SYSTEM MENU  
DISC MENU  
a
TO MAIN SET  
AC~  
OK  
DBB  
b
SURROUND  
a Cable to the main set.  
VOL  
b Power cable.  
MUTE  
1
4
2
5
8
0
3
6
7
9
ANGLE  
PROG  
GOTO  
SUBTITLE  
a
Turn on the apparatus; switch to  
standby mode.  
b Source selection keys  
Select a source.  
10 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
c DISPLAY/CLOCK  
m AUDIO  
Display play information on a  
For VCD, select stereo, mono-left or  
connected TV.  
Set or display clock.  
mono-right channel.  
For DVD/DivX video, select an audio  
language.  
d DISC MENU  
For video discs: access or exit the  
n SUBTITLE  
disc menu.  
Select a subtitle language.  
For video discs with playback  
control(PBC): turn on/off PBC.  
o GOTO  
During disc play, specify a position to  
start play.  
e SLEEP/TIMER  
Set the sleep timer.  
Set the alarm timer.  
p ANGLE/PROG  
Select a DVD camera angle.  
f
g
/SLOW  
Program tracks.  
For menus: navigate up  
Program titles/chapters for DVD play.  
Program radio stations.  
Move an enlarged picture up  
Rotate or invert pictures.  
Select a slow play mode.  
q Numeric keypad  
Select a title/chapter/track directly.  
/
r
s
Search within a track or disc.  
For menus, navigate left/right.  
Tune to a radio station.  
Move an enlarged picture left/right.  
Adjust time.  
Toggle between 24H and 12H during  
clock setting.  
Stop play.  
Erase a program.  
/
Skip to the previous/next track.  
Skip to the previous/next title or  
chapter.  
Select a preset radio station.  
h
/ZOOM  
For menus: navigate down.  
t
Move an enlarged picture down.  
Rotate or invert pictures.  
Zoom in or out a picture/video  
image on the TV screen.  
Start or pause play.  
u SURROUND  
Enable/disable Dolby Virtual  
Speakers (Dolby VS) sound effect.  
i LOUDNESS/DBB  
v OK  
Turn on or off automatic loudness  
Confirm a selection.  
adjustment.  
Turn on or off dynamic bass  
enhancement.  
w A-B  
Repeat a specific section within a  
track/disc.  
j VOL +/-  
Adjust volume.  
x SYSTEM MENU  
Access or exit the system setup  
menu.  
k MUTE  
Mute or restore volume.  
y MODE/DIM  
l DSC  
Select repeat play modes.  
Select a preset sound setting.  
Select shuffle play modes.  
Select a brightness level for the  
display screen.  
EN 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ConnectTV  
3 Connect  
Connect video cables  
With this connection, you can watch video  
from the unit on the TV screen.  
You can select the best video connection that  
your TV supports.  
Place the unit  
Option 1: Connect through HDMI (for a  
HDMI, DVI or HDCP-compliant TV).  
Option 2: connect through component  
video (for a standard TV or Progressive  
Scan TV).  
Option 3: connect through composite  
video (CVBS) (for a standard TV).  
Option 1: Connect through HDMI  
1 Place the unit near to the TV.  
COMPONENT OUT  
SUB  
OOFER  
OUT  
2 Place the subwoofer at the corner of the  
room or at least one meter away from  
the TV.  
AV-  
OUT  
W
DC  
IN  
FM  
ANT  
HDMI  
Y
Yb/Cb  
Yr/Cr  
3 Place the main unit on a hard, flat and  
stable surface.  
Tip  
TV  
HDMI IN  
You can also mount the unit on the wall with  
the supplied screws.  
Connect HDMI (High Definition Multimedia  
Interface), DVI (Digital Visual Interface), or  
HDCP (High-bandwidth Digital Contents  
Protection)-compliant TVs through HDMI  
for the best picture quality. This connection  
transmits both video and audio signals.  
Note  
To avoid magnetic interference or unwanted  
noise, never place this apparatus and speakers  
too close to any radiation devices.  
Never place this unit in an enclosed cabinet.  
Install this unit near the AC outlet where the  
AC power plug can be easily reached.  
Through this connection, you can watch DVDs  
that contain HD (High-Definition) content.  
Note  
Before you connect  
Some TVs do not support HDMI audio  
transmission.  
This connection provides the best video  
quality.  
1 Place a soft cloth on a hard, flat, stable  
surface.  
2 With its front panel face-down, place the  
1 Connect an HDMI cable (not supplied)  
unit onto the cloth.  
to:  
12 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
the HDMI socket on this unit.  
1 Connect the supplied composite video  
the HDMI input socket on the TV.  
cable to:  
the AV OUT socket on this unit.  
the video input socket on the TV.  
Note  
If your TV has only a DVI connection, connect  
through a HDMI/DVI adaptor. An extra  
audio connection is needed to complete this  
connection.  
Connect Subwoofer  
1 Insert the grey audio plug from the  
subwoofer into the SUBWOOFER OUT  
socket on the main unit.  
Option 2: Connect through  
component video  
Connect a progressive scan TV through  
component video for higher quality video.  
COMPONENT OUT  
SUB  
OOFER  
OUT  
AV-  
OUT  
W
DC  
IN  
FM  
ANT  
HDMI  
Y
Yb/Cb  
Yr/Cr  
SUB  
WOOFER  
OUT  
COMPONENT OUT  
SUB  
OOFER  
OUT  
AV-  
OUT  
W
DC  
IN  
FM  
ANT  
HDMI  
Y
Yb/Cb  
Yr/Cr  
TO MAIN SET  
AC~  
COMPONENT OUT  
Yb/Cb Yr/Cr  
Y
Y
Pb Pr  
TV  
2 Connect another grey plug (DC input  
plug) from the subwoofer to the DC IN  
socket on the main unit.  
1 Connect component video cable (red/  
blue/green - not supplied) to:  
the COMPONENT OUT(Y Pb/Cb  
Pr/Cr) sockets on this unit.  
the component input sockets on the  
TV.  
COMPONENT OUT  
SUB  
OOFER  
OUT  
AV-  
OUT  
W
DC  
IN  
FM  
ANT  
HDMI  
Y
Yb/Cb  
Yr/Cr  
DC  
IN  
TO MAIN SET  
AC~  
Option 3: Connect through  
composite video  
COMPONENT OUT  
SUB  
OOFER  
OUT  
AV-  
OUT  
W
DC  
IN  
FM  
ANT  
HDMI  
Y
Yb/Cb  
Yr/Cr  
-
AV  
OUT  
AUDIO IN  
TV  
EN 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connect power  
Caution  
Risk of product damage! Ensure that the  
power supply voltage corresponds to the  
voltage printed on the back or the underside  
of the unit.  
Risk of electric shock! When you unplug the  
AC power, always pull the plug from the  
socket. Never pull the cord.  
Before you connect the AC power, ensure you  
have completed all other connections.  
1 Connect the power plug (black) on the  
subwoofer to the wall outlet.  
TO MAIN SET  
AC~  
Tip  
The AC voltage, frequency and current  
consumption information is located at rear of  
the main unit.  
14 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Get started  
Caution  
Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiation exposure or  
other unsafe operation.  
Always follow the instructions in this chapter in  
sequence.  
If you contact Philips, you will be asked for the  
model and serial number of this apparatus.The  
model number and serial number are on the  
back of the apparatus.Write the numbers here:  
Model No. __________________________  
Serial No. ___________________________  
Set clock  
1 In the standby mode, press and hold  
CLOCK on the remote control to  
activate the clock setting mode.  
» 24H begin to blink.  
Prepare the remote control  
Caution  
2 Press  
/
repeatedly to toggle  
between 12H and 24H.  
Risk of explosion! Keep batteries away from  
heat, sunshine or fire. Never discard batteries  
in fire.  
3 Press CLOCK to confirm.  
» The hour digits displays and begin to  
blink.  
For first-time use:  
4 Press  
/
to set the hour and press  
1 Remove the protective tab to activate the  
CLOCK to confirm.  
» The minute digits displays and begin  
to blink.  
remote control battery.  
2 Open the battery compartment.  
3 Insert one lithium CR2025 battery with  
5 Press  
/
to set the minute and press  
correct polarity (+/-) as indicated.  
CLOCK to confirm.  
4 Close the battery compartment.  
Note  
Turn on  
Before you press any function button on the  
remote control, first select the correct source  
with the remote control instead of the main  
unit.  
1 Press  
.
» The unit switches to the last selected  
source.  
EN 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[NTSC] - For TV with NTSC color  
Switch to standby mode  
system.  
1 Press again.  
5 To exit the menu, press SYSTEM MENU.  
» The clock (if set) appears on the  
display panel.  
Note  
When the HDMI cable is connected, the [TV  
System] option is unavailable.  
Find the correct viewing  
channel  
1 Press to turn on the unit.  
Change system menu  
language  
2 Press DISC to switch to disc mode.  
3 Turn on the TV and switch to the correct  
video-in channel in one of the following  
ways:  
1 Press SYSTEM MENU.  
2 Select [General Setup].  
Go to the lowest channel on your  
TV, then press the Channel Down  
button until you see the Philips  
screen.  
Press the source button repeatedly  
on the remote control of your TV.  
3 Select [OSD Language] and then press  
.
4 Select a setting and then press OK.  
5 To exit the menu, press SYSTEM MENU.  
Tip  
Turn on Progressive Scan  
The video-in channel is between the lowest  
and highest channels and may be called  
FRONT, A/V IN, VIDEO, HDMI etc. See the  
TV user manual on how to select the correct  
input on the TV.  
Progressive scan displays twice the number of  
frames per seconds than interlaced scanning  
(ordinaryTV system).With nearly double the  
number of lines, progressive scan offers higher  
picture resolution and quality.  
Before you turn on this feature, ensure that:  
The TV supports progressive scan  
signals.  
You have connected this unit with  
the TV through component video.  
Select the correctTV system  
Change this setting if the video does not appear  
correctly. By default, this setting matches the  
most common setting forTVs in your country.  
1 Turn on the TV.  
2 Ensure that the TV progressive scan  
mode is deactivated (see the TV user  
manual).  
1 Press SYSTEM MENU.  
2 Select [Video Setup].  
3 Select [TV System] and then press  
.
3 Switch the TV to the correct viewing  
4 Select a setting and then press OK.  
channel for this unit.  
[PAL] - For TV with PAL color  
4 Press DISC.  
system.  
5 Press SYSTEM MENU.  
6 Press to select [Video Setup] in the  
[Multi] - For TV that is compatible  
with both PAL and NTSC.  
menu, then press  
.
16 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 Select [Progressive], then press  
.
8 Select [On], then press OK.  
» A warning message is displayed.  
9 To proceed, select [OK] and press OK.  
» The progressive setup is complete.  
Note  
If a blank/distorted screen is displayed, wait  
for 15 seconds for auto recovery or turn off  
progressive scan manually.  
10 Turn on the progressive scan mode on  
the TV.  
EN 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For VCD with PlayBack Control (PBC)  
feature (version 2.0 only):  
With the PBC feature, you can play VCD  
interactively according to the menu screen.  
5 Play  
1 During play, press DISC MENU to  
Note  
enable/disable PBC.  
With some disc/file types, play may differ.  
» When PBC is enabled, the menu  
screen is displayed.  
» When PBC is disabled, normal play is  
resumed.  
Play discs  
Select an audio language  
You can select an audio language on DVDs,  
DiVx video or VCDs.  
1 During disc play, press AUDIO.  
» The language options appear. If the  
selected audio channels is unavailable,  
the default disc audio channel is used.  
Caution  
Never look at the laser beam inside the unit.  
Risk of product damage! Never play discs with  
accessories such as disc stabilizer rings or disc  
treatment sheets.  
Never put any objects other than discs into  
the disc compartment.  
1 Press DISC to select the DISC source.  
Note  
2 Insert a disc into the disc compartment  
and press .  
For some DVDs, the language can only be  
changed from the disc menu. Press DISC  
MENU to access the menu.  
Ensure that the label faces outwards.  
3 Play starts automatically.  
To stop play, press  
.
To pause or resume play, press  
To skip to the previous/next title/  
chapter/track, press  
.
Select a subtitle language  
/
.
You can select a subtitle language on DVDs or  
DivX® Ultra discs.  
If play does not start automatically:  
Select a title/chapter/track and then press  
During play, press SUBTITLE.  
OK.  
Tip  
Tip  
For some DVDs, the language can only be  
changed from the disc menu. Press DISC  
MENU to access the menu.  
To play a locked DVD, enter the 6-digit  
parental control password.  
Use the disc menu  
When you load a DVD/(S)VCD disc, a menu  
may be displayed on the TV screen.  
Play from USB  
Note  
To access or exit the menu manually:  
1 Press DISC MENU.  
Ensure that the USB device contains playable  
music, pictures or video.  
18 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1 Insert the USB plug into the  
socket.  
Play MP3/WMA/picture files  
2 Press USB to select the USB source.  
You can play MP3/WMA/picture files copied  
onto a CD-R/RW, recordable DVD or USB  
device.  
3 Press DISC MENU until the folder is  
displayed.  
4 Press  
OK to confirm.  
5 Press to select a file from the folder.  
to start play.  
To stop play, press  
/
to select a folder, then press  
1 Insert a disc or connect a USB device.  
2 Select a source:  
/
For discs, press DISC.  
For USB devices, press USB.  
6 Press  
.
3 Press DISC MENU until the folder is  
To pause or resume play, press  
To skip to the previous/next file,  
press  
.
displayed.  
4 Press  
/
to select a folder, then press  
/
.
OK to confirm.  
5 Press  
/
to select a file from the folder.  
6 Press OK /  
to start play.  
Play DivX video  
To stop play, press .  
To pause or resume play, press  
To skip to the previous/next file,  
.
You can play DivX files copied onto a CD-R/  
RW, recordable DVD, USB device.  
press  
/
.
1 Insert a disc or connect a USB device.  
2 Select a source:  
For discs, press DISC.  
For USB devices, press USB  
repeatedly.  
Play control  
Select repeat/shuffle play options  
1 During play, press MODE/DIM repeatedly  
to select a repeat option or the shuffle  
play mode.  
3 Select a file to play and press OK.  
To stop play, press  
.
To pause or resume play, press  
.
To change a subtitle language, press  
SUBTITLE.  
To resume normal play, press  
MODE/DIM repeatedly until no  
option is displayed.  
Note  
You can only play DivX videos rented or  
purchased through the DivX registration code  
of this unit.  
Repeat A-B (DVD/VCD/CD/MP3/  
WMA)  
Subtitle files with the following filename  
extensions (.srt, .smi, .sub, .ssa, .ass) are  
supported but do not appear on the file  
navigation menu.  
1 During music or video play, press A-B at  
the start point.  
The subtitle filename has to be the same as  
the file name of the video.  
2 Press A-B at the end point.  
» The selected section starts to play  
repeatedly.  
To cancel repeat play, press A-B  
again.  
EN 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Play options  
Note  
The section A and B can be set only within the  
same track/title.  
Display play information  
1 During play, press DISPLAY/CLOCK  
repeatedly to show different play  
information or clock.  
Search forward/backward  
1 During play, press  
/
repeatedly to  
Program  
select a search speed.  
To resume play at normal speed,  
press  
.
For DVDs/VCDs/CDs:  
1 In stop mode, press ANGLE/PROG to  
Search by time or chapter/track  
number  
1 During video/audio play, press GOTO  
repeatedly to display time field or track  
field.  
access the program menu.  
2 Use the number keys to enter the tracks/  
chapters into the program list.  
3 Repeat step 2 until the program is  
complete.  
For the time field, enter the play  
position in hours, minutes and  
seconds.  
4 Select [Start].  
» The programmed tracks/chapters start  
to play.  
For the track field, enter the track/  
chapter number.  
Play starts automatically at your  
selected point.  
Note  
You cannot program picture files/discs, WMA,  
DixX or MP3 discs.  
Note  
The displayed fields may vary from source  
type.  
Zoom in/out image  
1 During video/picture play, press and  
hold /ZOOM to select zoom scale.  
Resume video play from last stopped  
point  
When the image is zoomed in, you  
can press  
/
/ / to pan through  
the image.  
Note  
Slow-motion play  
1 During video play, press /SLOW  
repeatedly to select a slow play mode.  
» The sound is muted.  
This feature is only available for DVD/VCD/  
CD play.  
1 In stop mode and when the disc has not  
been removed, press  
.
» To resume play at normal speed, press  
.
To cancel resume mode and stop play  
completely:  
1 In stop mode, press  
.
20 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Select a camera angle  
Note  
This feature is only available for DVDs  
recorded with multiple camera angles.  
1 During play, press ANGLE/PROG  
repeatedly to select a camera angle.  
Picture view options  
Preview pictures  
1 During play, press  
.
» The thumbnails of 12 pictures are  
displayed.  
2 Press  
/
to turn to the next/previous  
page (if available)  
3 Navigate through the current page with  
buttons  
/
, / and select a picture.  
4 Press OK to start slide show from the  
selected picture to the last one in this  
folder.  
Select a slide show play mode  
1 During play, press ANGLE/PROG  
repeatedly to select a slide-show play  
mode.  
Rotate picture  
1 During play,  
Press  
Press  
to rotate counter-clockwise.  
to rotate clockwise.  
Press to flip up/down.  
Press to flip left/right.  
EN 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tip  
6 Adjust settings  
You can set or change the password, go to  
[Preferences] >[Password].  
Note  
[OSD Language]  
Select an on-screen menu language.  
If the setup option is grayed out, it means the  
setting cannot be changed at the current state.  
[DivX(R) VOD Code]  
Display the DivX® registration code.  
General setup  
Tip  
Use this product’s DivX registration code  
when you rent or purchase video from www.  
divx.com/vod. The DivX videos rented or  
purchased through the DivX® VOD (Video  
On Demand) service can be played only on  
the device to which it is registered.  
1 Press SYSTEM MENU.  
» [General Setup]menu is displayed.  
2 Press  
.
3 Select an option, then press OK.  
4 Select a setting, then press OK.  
To return to the previous menu,  
press  
.
Audio setup  
To exit the menu, press SYSTEM  
MENU.  
1 Press SYSTEM MENU.  
» [General Setup] menu is displayed.  
2 Press to select [Audio Setup], then  
press  
.
3 Select an option, then press OK.  
4 Select a setting, then press OK.  
To return to the previous menu,  
press  
.
To exit the menu, press SYSTEM  
MENU.  
[Disc Lock]  
Set play restriction for a disc which is loaded  
in the disc compartment (maximum 20 discs  
can be locked).  
[On] - Restrict access to the current  
disc. The next time you want to play this  
disc or unlock it, you need to enter the  
password.  
[Off] - Play all discs.  
22 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[Analogue Output]  
[Off] – Enjoy surround sound with a full  
Select an analogue setting based on the audio  
device that is connected through the analogue  
audio jack.  
dynamic range.  
Note  
[LT/RT] - For surround sound output  
through two speakers.  
Applicable only to Dolby Digital encoded  
DVD.  
[Stereo] - For stereo output.  
[
VS Wide] - Dolby Virtual Speaker  
option for small space.  
VS Reference] - Dolby Virtual Speaker  
option for spacious room.  
[
Video setup  
1 Press SYSTEM MENU.  
[HDMI Audio]  
» [General Setup] menu is displayed.  
Select the HDMI audio setting when you  
connect this product and the TV with an  
HDMI cable.  
2 Press to select [Video Setup], then  
press  
.
[On] - Allow audio output through the  
TV and the speaker system. If the audio  
format on the disc is not supported, it  
will be downmixed to two-channel sound  
(linear-PCM).  
[Off] - Disable audio output from the  
TV. The sound is only output through the  
speaker system.  
3 Select an option, then press OK.  
4 Select a setting, then press OK.  
To return to the previous menu,  
press  
.
To exit the menu, pressSYSTEM  
MENU.  
[Audio Sync]  
Set the delay time for audio output when you  
play a video disc.  
1 Press OK.  
2 Press  
/
to set the delay time.  
3 Press OK to confirm and exit.  
[Sound Mode]  
Selects a preset sound effect to enhance the  
audio output.  
[TV System]  
Change this setting if the video does not  
appear correctly. By default, this setting  
matches the most common setting for TVs in  
your country.  
[3D] – Set the 3D processing output  
mode.  
[Movie Mode] – Select a sound effect for  
movies.  
[PAL] - For PAL-system TV.  
[Multi] - For TV that is compatible with  
both PAL and NTSC.  
[Night Mode]  
Make loud sound level softer and soft sound  
level louder so that you can watch the DVD  
movies at a low volume, without disturbing  
others.  
[NTSC] - For NTSC-system TV.  
[On] – Enjoy quiet viewing at night.  
EN 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
[TV Display]  
Select a display format:  
Note  
This product supports the resolution display of  
720p and above.  
[HDMI Setup]  
When you connect this apparatus and TV  
with HDMI cable, select the best HDMI video  
setting that your TV supports.  
[4:3 Pan Scan] - For 4:3 screen TV: full-  
height display with the trimmed sides.  
[4:3 Letter Box] - For 4:3 screen TV:  
wide-screen display with black bars on  
the top and bottom of the screen.  
[16:9] - For wide-screen TV: display ratio  
16:9.  
[Wide Screen Format] – Define the wide  
screen format for disc play.  
Note  
[Progressive]  
This setting is only available if you have set the  
[TV Display] setting to [16:9 Wide Screen].  
If a progressive scan TV is connected to this  
product, turn on the progressive scan mode.  
[HDMI Video] – Select the HDMI video  
output resolution that is compatible with  
your TV display capability.  
[On] - Turn on progressive scan.  
[Off] - Turn off progressive scan mode.  
Note  
Note  
For more detailed description, see “Get  
started” > “Turn on progressive scan”.  
If the setting is not compatible with your TV,  
a blank screen appears. Wait for 15 seconds  
for auto recover or switch to its default mode  
as follows: 1) Press . 2) Press . 3) Press  
ZOOM.  
[Picture Setting]  
Select a predefined set of picture color  
settings or customize the personal setting.  
[EasyLink] -- Set one-touch play and  
one-touch standby between EasyLink-  
compliant devices.  
[Standard] - Original color setting.  
[Bright] - Vibrant color setting.  
[Soft] - Warm color setting.  
[Personal] - Customize the color setting.  
Set the level of brightness, contrast, tint  
and color saturation, then press OK.  
Note  
Compliant devices must be connected to the  
unit via HDMI.  
[HD JPEG]  
Enjoy untouched and uncompressed JPEG  
pictures at its original resolution when you  
you connect this product and the TV with an  
HDMI cable.  
Preferences  
[On] - Display high definition picture.  
Note  
[Off] - Display standard picture.  
Stop disc play before you can access to  
[Preferences].  
24 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note  
Rated DVDs above the level you set in  
[Parental control] require a password to be  
played.  
The ratings are country-dependent. To allow  
all discs to play, select ‘8’.  
Some discs have ratings printed on them but  
are not recorded with ratings. This function  
has no effect on such discs.  
[PBC]  
1 Press SYSTEM MENU.  
Turn on or off the content menu of VCDs/  
SVCDs with PBC (playback control) feature.  
» [General Setup] menu is displayed.  
2 Press to select [Preferences], then  
[On] - Display the index menu when you  
load a disc for play.  
[Off] - Skip the menu and start play from  
the first title.  
press  
.
3 Select an option, then press OK.  
4 Select a setting, then press OK.  
To return to the previous menu,  
[MP3/JPEG Nav]  
Select to display the folders or display all the  
files.  
press  
.
To exit the menu, press SYSTEM  
MENU.  
[View Files] - Display all the files.  
[View Folders] - Display the folders of  
MP3/WMA files.  
[Audio]  
Select an audio language for disc play.  
[Password]  
Set or change the password for locked discs  
and play restricted DVDs.  
[Subtitle]  
Select a subtitle language for disc play.  
[Disc Menu]  
1. Press the Numeric buttons to enter  
default password ‘123456’ or the last set  
password at [Old Password] field.  
2. Enter the new password at [New  
Password] field.  
Select a disc menu language.  
Note  
If the language you have set is not available on  
the disc, the disc uses its own default language.  
3. Enter the new password again at [Confirm  
PWD] field.  
4. Press OK to exit the menu.  
[Parental control]  
Restrict access to discs that are unsuitable  
for children. These types of discs must be  
recorded with ratings.  
Note  
If you forget the password, enter ‘123456’  
before you set a new password.  
1. Press OK.  
2. Select a rating level, then press OK.  
3. Press the numeric buttons to enter the  
password.  
EN 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[Divx Subtitle]  
Select the language of the DivX.  
Tip  
Ensure that the subtitle file has the exact same  
file name as the movie file. If for example the  
file name of the movie is ‘Movie.avi’, then  
you need to name the text file ‘Movie.sub’ or  
‘Movie.srt’.  
[Default]  
Reset all the settings of this product to factory  
default, except for [Disc Lock], [Parental  
control] and [Password] settings.  
26 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toexit Plug and Play installation mode  
7 Tune to FM  
radio stations  
1 press source keys or on the remote  
control.  
» The system switches to the designated  
source mode or standby mode.  
Note  
Program radio stations  
automatically  
Ensure that you have connected and fully  
extended the supplied FM antenna.  
Note  
Plug & Play  
You can program a maximum of 20 preset  
radio stations.  
When you connect the unit to the power  
supply for the first time, or no radio station  
is stored in this unit, Plug and Play mode is  
activated to store all available radio stations  
automatically.  
1 Connect the unit to the power supply.  
» [AUTO INSTALL - PRESS PLAY,  
STOP CANCEL] (auto install - press  
the PLAY button; to cancel, press  
) displays.  
1 Press  
/
to select a preset number to  
start programing.  
2 Press and hold ANGLE/PROG for  
2 seconds to activate automatic  
programming.  
» [AUTO] (auto) is displayed briefly.  
» All available stations are programmed  
in the order of waveband reception  
strength.  
2 Press  
on the main unit to start  
» The last programed radio station is  
installation.  
broadcast automatically.  
» [AUTO] (auto) displays.  
» [PROG] (program) flashes.  
» The unit automatically store radio  
Program radio stations  
manually  
stations with sufficient signal strength.  
3 When all the available radio stations are  
stored, the first preset radio station is  
broadcast automatically.  
Note  
You can program a maximum of 20 preset  
radio stations.  
Tip  
If no key is pressed during Plug and Play  
mode, the system goes to Standby mode  
after timeout of 5 times. To go to installation  
1 Tune to a radio station.  
2 Press ANGLE/PROG to activate  
again, press and hold  
Standby mode.  
for 3 seconds under  
programming.  
3 Press  
/
to allocate a number from  
1 to 20 to this radio station, then press  
ANGLE/PROG to confirm.  
» The preset number and the frequency  
of the preset station are displayed.  
EN 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Repeat the above steps to program other  
stations.  
Note  
To overwrite a programmed station, store  
another station in its place.  
Tune to a preset radio station  
1 Press / to select a preset number  
that you want.  
28 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press  
one  
time  
two  
times  
Display  
DBB  
Result  
Bass enhancement  
turned on  
8 Adjust volume  
level and sound  
effect  
LOUDNESS Loudness control  
turned on, bass  
enhancement turned  
off.  
three  
times  
OFF  
Both loudness  
control and bass  
enhancement turned  
off.  
Adjust volume level  
1 During play, press VOL +/- to increase/  
decrease the volume level.  
Select surround sound effect  
Select a sound effect  
Dolby VS (Dolby Virtual Speaker) technology  
creates a highly compelling 5.1-channel  
listening experience from as few as two  
speakers. It is an ideal entertainment solution  
for locations where space for multiple speaker  
setup is limited.  
Note  
You cannot use different sound effects at the  
same time.  
1 During play, press SURROUND.  
» The surround sound effect options  
display:  
Select a preset sound effect  
1 During play, press DSC repeatedly to  
» [WIDE] (Dolby virtual speaker  
wide): you will actually sense that the  
speakers are farther apart than they  
really are; it is great for small spaces.  
» [REFERENCE] (Dolby virtual speaker  
reference): the front sound image  
width is the same as the distance  
between the two speakers, so it is  
perfect if you have a more spacious  
environment.  
select:  
[POP] (pop)  
[JAZZ] (jazz)  
[ROCK] (rock)  
[CLASSIC] (classic)  
[FLAT] (flat)  
Enhance bass and automatic control  
loudness  
» [OFF] (off)  
Automatic loudness control increases the  
treble and bass effect at low volume levels  
(the higher the volume, the lower the treble  
and bass levels).  
Note  
When the DVD disc playback, the Dolby  
VS turns on automatically. When the CD/  
MP3/WMA playback, the Dolby VS turns off  
automatically.  
1 During play, press LOUDNESS/DBB  
repeatedly to toggle between the bass  
enhancement and loudness control.  
EN 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Mute sound  
1 During play, press MUTE to mute/unmute  
sound.  
Listen through headphone  
1 Plug a headphone into the socket on  
the unit.  
30 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Set the sleep timer  
9 Other features  
1 When the unit is turned on, press SLEEP/  
TIMER repeatedly to select a set period  
of time (in minutes).  
Adjust brightness of display  
panel  
» The unit turns off automatically after  
the set period of time.  
1 In standby mode, press and hold MODE/  
DIM repeatedly to select different levels  
of brightness for the display panel.  
Connect other devices  
Listen to an audio player  
You can listen to audio player through this  
unit.  
Set the alarm timer  
1 Ensure that you have set the clock  
correctly.  
2 In standby mode, press and hold SLEEP/  
TIMER.  
» The hour digits are displayed and begin  
to blink.  
3 Press  
/
to set the hour.  
» The minute digits are displayed and  
MP3 LINK  
DVD/MP3 -WMA -CD COMPATIBLE  
begin to blink.  
4 Press  
/
to set the minute.  
5 Press DISC, TUNER or USB to set the  
source of alarm sound.  
6 Press SLEEP/TIMER to confirm.  
» A clock icon appears on the display.  
To activate/deactivate the wake-up timer,  
press SLEEP/TIMER to toggle between:  
[TIMER ON] (timer on)  
1 Connect the supplied 3.5mm audio cable  
to the MP3 LINK socket and to the  
A clock icon appears on the display.  
The unit turns on automatically at  
the set time and switches to the set  
source.  
headphone socket on the audio player.  
2 Select the MP3 Link source.  
[TIMER OFF] (timer off)  
3 Start play on the audio player.  
Clock icon disappears on the display.  
Note  
Alarm timer is not available under MP3 LINK  
mode.  
If DISC/USB source is selected and the  
track cannot be played, tuner is activated  
automatically.  
EN 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Tuner (FM)  
Tuning Range  
Tuning grid  
10 Product  
information  
87.5 - 108MHz  
50KHz  
Sensitivity  
- Mono, 26dB S/N Ratio  
<22 dBf  
- Stereo, 46dB S/N Ratio <43 dBf  
Note  
Search Selectivity  
>28dBf  
Total Harmonic Distortion <2%  
Product information is subject to change  
without prior notice.  
Signal to Noise Ratio  
>55dB  
Speakers  
Speaker  
Specifications  
8ohm  
Impedance  
Speaker Driver  
Amplifier  
3” Full range  
Rated Output Power 2X10W + 40W RMS  
Frequency Response 40 -20000 Hz, -3dB  
Signal to Noise Ratio >67dB  
+5.25”subwoofer  
>82dB/m/W  
Sensitivity  
Aux Input  
0.5V RMS 20k ohm  
General information  
AC Power  
110 - 240V~, 50/60  
Hz  
Main unit: 22W;  
Subwoofer: 45W  
<4W  
Disc  
Laser Type  
Disc Diameter  
Video Decoding MPEG-1 / MPEG-2 / DivX  
Video DAC  
Signal System  
Video Format  
Video S/N  
Audio DAC  
Total Harmonic <1%  
Distortion  
Frequency  
Response  
Semiconductor  
12cm/8cm  
Operation Power  
Consumption  
Standby Power  
Consumption  
Composite Video  
Output  
Headphone Output  
USB Direct  
Dimensions  
- Main Unit  
(W x H x D)  
- Active Subwoofer  
Box (W x H x D)  
Weight  
- With Packing  
- Main Unit  
12Bits  
1.0Vp-p, 75ohm  
PAL / NTSC  
4:3 / 16:9  
>48dB  
2X15mW 32ohm  
Version 2.0  
24Bits / 96kHz  
525 x 90 x 200mm  
600 x 400 x 308 mm  
40Hz - 20kHz (44.1kHz)  
40Hz - 22kHz (48kHz)  
40Hz - 24kHz (96kHz)  
>67dBA  
S/N Ratio  
8.8 kg  
2.62 kg  
- Active Subwoofer Box 3.03 kg  
32 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Supported disc formats  
USB playability information  
Digital Video Discs (DVDs)  
Video CDs (VCDs)  
Super Video CDs (SVCDs)  
Digital Video Discs + Rewritable  
(DVD+RW)  
Compatible USB devices:  
USB flash memory (USB 2.0 or  
USB1.1)  
USB flash players (USB 2.0 or  
USB1.1)  
memory cards (requires an additional  
card reader to work with this  
apparatus)  
Compact Discs (CDs)  
Picture (Kodak, JPEG) files on CDR(W)  
DivX(R) disc on CD-R(W):  
DivX 3.11, 4.x and 5.x  
DivX Ultra disc  
Supported formats:  
WMA  
USB or memory file format FAT12,  
FAT16, FAT32 (sector size: 512 bytes)  
MP3 bit rate (data rate): 32-320 Kbps  
and variable bit rate  
Supported MP3-CD formats:  
ISO 9660  
Max. title/album name: 12 characters  
Max. title number plus album: 255.  
Max. nested directory: 8 levels.  
Max. album number: 32.  
WMA v9 or earlier  
Directory nesting up to a maximum  
of 8 levels  
Number of albums/ folders:  
maximum 99  
Number of tracks/titles: maximum  
999  
ID3 tag v2.0 or later  
Max. MP3 track number: 999.  
Supported sampling frequencies for MP3  
disc: 32 kHz, 44.1 kHz, 48 kHz.  
Supported Bit-rates of MP3 disc are: 32,  
64, 96, 128, 192, 256 (kbps).  
File name in Unicode UTF8  
(maximum length: 128 bytes)  
The following formats are not supported:  
Files like *.VMA, *.AAC, *.DLF,  
*.M3U,  
*.PLS, *.WAV  
Unsupported formats:  
Empty albums: an empty album is an  
Non-English Album/Title name  
Discs recorded in Joliet format  
MP3 Pro and MP3 with ID3 tag  
album that does not contain MP3/  
WMA files, and is not be shown in  
the display.  
Unsupported file formats are  
skipped. For example, Word  
documents (.doc) or MP3 files with  
extension .dlf are ignored and not  
played.  
AAC, WAV, PCM audio files  
DRM protected WMA files (.wav,  
.m4a, .m4p, .mp4, .aac)  
WMA files in Lossless format  
EN 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Black and white or distorted picture  
11 Troubleshooting  
The disc does not match the TV color  
system standard (PAL/NTSC).  
Sometimes a slight picture distortion may  
appear. This is not a malfunction.  
Clean the disc.  
A distorted picture may appear during  
progressive scan setup.  
Note  
Never remove the casing of this system.  
To keep the warranty valid, never try to repair  
the system yourself.  
The aspect ratio of theTV screen cannot be  
changed even though you have set theTV  
display format.  
If you encounter problems when using this  
system, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips web site (www.  
Philips.com/support).When you contact Philips,  
ensure that your Philips is nearby and the model  
number and serial number are available.  
The aspect ratio if fixed on the loaded  
DVD disc.  
The aspect ratio may not be changed for  
some TV systems.  
No sound or poor sound  
No power  
Adjust the volume.  
Ensure that the AC cord of the apparatus  
is connected properly.  
Disconnect the headphone.  
Ensure the wireless subwoofer is  
connected.  
Ensure that there is power at the AC  
outlet.  
As a power-saving feature, the system  
switches off automatically 15 minutes  
after track play reaches the end and no  
control is operated.  
Remote control does not work  
Before you press any function button,  
first select the correct source with the  
remote control instead of the main unit.  
Reduce the distance between the remote  
control and the unit.  
Insert the battery with its polarities (+/–  
signs) aligned as indicated.  
Replace the battery.  
No disc detected  
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at  
the lens has cleared.  
Aim the remote control directly at the  
sensor on the front of the unit.  
Replace or clean the disc.  
Use a finalized CD or correct format disc.  
Disc does not play  
No picture  
Insert a readable disc and ensure that the  
Check the video connection.  
label side faces outwards.  
Turn on the TV to the correct Video-In  
channel.  
Check the disc type, color system and  
regional code. Check for any scratches or  
smudges on the disc.  
Progressive scan is activated but the TV  
does not support progressive scan.  
Press SYSTEM MENU to exit the system  
setup menu.  
Disable the password for parental control  
or change the rating level.  
34 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Moisture has condensed inside the  
system. Remove the disc and leave the  
system turned on for about an hour.  
Disconnect and reconnect the AC power  
plug, and then turn on the system again.  
As a power-saving feature, the system  
turns off automatically 15 minutes after  
disc play reaches the end and no control  
is operated.  
USB device not supported  
The USB device is incompatible with the  
unit. Try another one.  
Timer does not work  
Set the clock correctly.  
Switch on the timer.  
Clock/timer setting erased  
Power has been interrupted or the power  
cord has been disconnected.  
Reset the clock/timer.  
Poor radio reception  
Increase the distance between the unit  
and your TV or VCR.  
Fully extend the FM antenna.  
Connect an outdoor FM antenna instead.  
Unable to select Progressive Scan  
Ensure the video output mode is set to  
[Pr/Cr Pb/Cb Y].  
No sound on HDMI connection.  
You may not hear any sound if the  
connected device is non-HDCP  
compliant or only DVI-compatible.  
No picture on HDMI connection.  
Check if the HDMI cable is faulty. Replace  
a new HDMI cable.  
If this happens when you change the  
HDMI video resolution, select the correct  
resolution until the picture appears.  
Audio or subtitle languages cannot be set  
The disc is not recorded with sound or  
subtitles in multiple languages.  
The audio or subtitle language setting is  
prohibited on the disc.  
Cannot display some files in USB device  
The number of folders or files in the USB  
device has exceeded a certain limit. This  
phenomenon is not a malfunction.  
The formats of these files are not  
supported.  
EN 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Appendix  
Mount to a wall  
Caution  
Risk of product damage! Always consult  
professional personnel to safely mount the  
product to a wall.  
Risk of injury! Ensure that no supply ducts such  
as gas, water or electricity are harmed when  
you drill the holes.  
What you’ll need  
2 screws and 2 dowels (supplied)  
Wall mounting instruction sheet  
(supplied)  
Electric drill  
Screwdriver  
Pencil  
Mount the main unit  
Caution  
Mount the main unit and speakers to a solid  
concrete wall or plaster board wall only!  
You can mount the main unit to the wall.  
1 Use the supplied wall mounting  
instruction sheet to mark the drilling  
positions on the wall, then drill 2 holes as  
marked.  
2 Crew on the mounting dowels and  
screws.  
3 Hook the main unit in place.  
Tip  
Refer to the supplied wall mounting instruction  
sheet for details.  
36 EN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
© 2010 Koninklijke Philips Electronics N.V.  
All rights reserved.  
Document order number: DCM263_55_UM_V1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco VCR TLR2168S User Manual
Pentax Digital Camera Optio 450 User Manual
Philips Flat Panel Television 19MF337B User Manual
Philips Headphones SHC2000 User Manual
Philips Portable DVD Player PET704 04 User Manual
Philips Surge Protector SPP1187WC User Manual
Philips Washer 191EW9 User Manual
Pioneer Car Stereo System VSX 60 User Manual
Planet Technology Portable Multimedia Player SW 502 User Manual
Polk Audio Speaker AMR70 User Manual