MCL1801 FAMILY
LCD 18” COLOR MONITOR
User’s Manual
m
e
nu
Copyright © 2002 FIMI S.r.l. Saronno - Italy
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Printed in Italy
(Rev. 1.1)
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
The FIMI Medical Grade MCL1801 Medical is a color active matrix, liquid crystal display exclusively
designed for medical applications.
The monitor can be used for general medical viewing requiring high level color image quality, as well
as in the Control Stations of Patient Monitoring, with a resolution of 1280 x 1024, and can accept an
analogue signal input as well as a digital input.
The product is engineered to meet all stringent medical safety requirements, including UL2601.1,
CAN/CSA C22.2 No.601.1, EN-60601.1 and the product can be safely placed next to other sensitive
equipment with no risk of harmful interference.
Certifications of monitor also cover requirements for liquid ingress and current-leakage from power
supply.
The other key features of the MCL1801 are:
- long term luminance stability through an optional backlight stabilization circuit
- luminace stability vs the viewing angle
- contrast stability vs the viewing angle
- brightness uniformity
- automatic brightness control with backlight sensor and ambient light sensor
- internal automatic greyscale calibration (10 bit L.U.T.)
The tilt swivel base can be removed and the monitor uses a mounting plate that conforms to the
VESA mounting standard, that allows flexible mounting options, including wall mounting and rolling
stands.
User controls are available through On-Screen Display.
MCL1801
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
TECHNICAL INFORMATION.............................................5
DIMENSIONS..........................................................................6
INSTALLATION.....................................................................8
MOUNTING INSTRUCTION..............................................8
CONNECTING INSTRUCTION...........................................9
connecting AC power....................................................10
connecting analog video...............................................11
connecting digital video................................................11
connecting the optional touchscreen.............................12
INPUT INSTRUCTION.........................................................13
CONTROL PANEL DESCRIPTION....................................14
(OSD) ON SCREEN DISPLAY..............................................15
menu structure..............................................................15
OSD key functions.......................................................16
OSD controls...............................................................16
main menu................................................16
information...............................................17
image adjust..............................................17
horizontal position....................................18
vertical position........................................18
scale / center.............................................18
image Enhancement..................................18
ABC selection...........................................18
transfer function........................................19
advanced...................................................19
phase adjust..............................................20
clock adjust...............................................20
service.......................................................21
auto-setup options.....................................21
auto-setup on modest................................21
auto-clock feature.....................................22
auto-(Phase/Position)................................22
auto-(Clock/Position)................................22
auto-level .................................................22
restore factory preset................................23
language....................................................23
OSD setting..............................................23
OSD position............................................24
(OSD) vertical position............................24
OSD size..................................................25
OSD transparency....................................25
OSD timeout............................................25
video source.............................................25
keyboard option.......................................26
MCL1801
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL INFORMATION
Display Panel
18.1” (460mm) SXGA active matrix monocrome TFT/LCD
Supported Grayscale
Dimensions
8-bit
Panel 410 x 362 x 105 mm. (width x height x depth.)
7,7 Kg ( panel ), 3,7 Kg ( pedestal )
359,0 x 287,2 mm ( width x height )
40 mS ( 10% to 90% rising + 90% to 10% falling )
± 85° typ. horizontal or vertical ( contrast ratio ≥ 15 )
400 : 1 typ.
Weight
Active display area
Response Time
Viewing Angle
Contrast Ratio
White luminance
Pixel Pitch
200 cd/m2
0,2805 (one triad) x 0,2805 mm ( width x height )
Video interface
Analog Input:
Digital Input:
DSUB-15 connection for Separate Sync Video Signal or
SOG Video Signal.
DVI-D connection for TMDS signal link standard
version.
Scanning Frequency
Power Consumption
Power Supply
Max pixel clock 135MHz
≤ 70 W
From 90 to 264 Vac , 50 -60 Hz
Operation Temperature
Storage Temperature
Humidity
+10 to +45 °C
-20 to +60 °C
80% ( Maximum Wet-Bulb should be 39 °C and No condensation )
Shock
Half sine wave: 50G 11msec. ;X+/-, Y+/-, Z+/- (total 6 Directions), Each
two time shock.
MCL1801
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
410
360
197.78
306.02
MCL1801
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DIMENSIONS
205
205
100
117
MCL1801
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Before unpacking the monitor , prepare a suitable workspace. You need a stable and level surface near a
grounded wall outlet in an area that is relatively free of glare from sunlight or other sources of bright light.
The monitor is cooled by two internal fans. For best performance, do not block the cooling vents.
NOTE: before istalling this monitor, please refer to the user’s guides of your computer
and video adapter to make sure if these equipments require any change of setting.
Positioninig
WARNING:
WHEN POSITIONING THIS EQUIPMENT, ENSURE THAT THE MAINS PLUG AND SOCKET ARE
EASILY ACCESSIBLE
While unpacking the monitor, inspect it and other package contents for shipping damage that
could cause a fire or shock hazard. immediately report any shipping damage to the carrier or
transportation company, and contact customer service for assistance. keep all packing material
in case you need to ship, store or return the monitor.
After unpacking the monitor, make sure the following items are included:
● Monitor
● Mains cord set 1,8-meter (USA version)
● Mains cord set 1,8-meter (EU version)
● Signal cable 1,8-meter (DB15 / DB15)
● This user’s manual
If you ordered the monitor with the resistive touchscreen option, the following items should
also be included:
● User’s manual of touchscreen
● Touchscreen cable
PEDESTAL (standard)
With the built-in pedestal you can tilt the monitor for a most comfortable viewing angle as
shown in figure 8a.
5°
15°
fig. 8a
MCL1801
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING INSTRUCTION
PEDESTAL STANDARD (OPTIONAL)
I
O
fig. 9a
The pedestal must be fixed at monitor with N° 6 screws M3x10 (included into the BOX) as shown in
figure 9a.
ARM VESA PLATE
I
O
fig. 9b
An arm with VESA (100x100) interface must be fixed at monitor with N° 4 screws M4x10 as shown in
figure 9b.
MCL1801
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING INSTRUCTION
CONNECTING AC POWER
Plug the receptacle and of the cord set into the AC power adapter, then plug the power connector of the adapter
into the power port on the monitor.
This power port is located on the back of the monitor (see fig. 10a).
MAINS SWITCH
fig.10a
The power cord set can be fixed to cabinet with proper cable clamp and screw (see fig. 10b)
I
O
fig 10b
Insert the plug end of the power cord into a grounded wall outlet. For added protection, use a surge protector
between the AC adapter and the electrical wall outlet to prevent sudden current variations from reaching
the monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING ANALOG VIDEO (SXGA)
With the power the computer and the monitor turned off, connect the supplied video cable from the monitor
to the computer’s video port (see fig. 11a)
I
O
G
R
B
fig. 11a
Make sure the video cable connector is securely connected to the video port on your computer.
Turn the monitor on first, and then turn on the computer.
CONNECTING DIGITAL VIDEO (DVI)
With the power the computer and the monitor turned off, connect the supplied video cable from the monitor
to the computer’s video port (see fig. 11b)
I
O
G
R
B
fig. 11b
MCL1801
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TOUCHSCREEN (OPTIONAL)
If your monitor has this optional feature, connect the monitor’s RJ11-4 serial port to the computer’s 9-pin
RS-232 serial port using the proper cable (see fig. 12a)
I
O
G
R
B
fig. 12a
NOTE: Follow the instructions included on the enclosed CD for installing the Touchscreen drivers on
your system. Following driver software installation, calibrate your Touchscreen to the system following the
procedure described on the enclosed CD.
MCL1801
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT INSTRUCTION
fig.13a
RS232
or
VIDEO-INPUT
XVGA
DVI-INPUT
AC INLET
MAINS SOCKET
TOUCHSCREEN
AC INLET (Meet IEC 320/CEE 22 STANDARD)
110/220Vdc
RS232 / TOUCHSCREEN Connector (RJ11-4)
Pin 1 : RS232 Rx
Pin 2 : RS232 Tx
Pin 3 : ENABLE (Only with touch screen)
Pin 4 : GND
Note: When the option touchscreen is used, the RS232 monitor control is not available.
DVI INPUT Connector (Microcross™ DVI-D female connector)
Pin 1 : D2_RX - (T.M.D.S.)
Pin 2 : D2_RX + (T.M.D.S.)
Pin 3 : GND (Data 2 shield)
Pin 4 : N.C.
Pin 13 : N.C.
Pin 14 : +5V Power
Pin 15 : GND
Pin 16 : Hot Plug Detect
Pin 17 : D0_RX - (T.M.D.S.)
Pin 18 : D0_RX + (T.M.D.S.)
Pin 19 : GND (Data 0 shield)
Pin 20 : N.C.
Pin 5 : N.C.
Pin 6 : SCL (For DDC)
Pin 7 : SDA (For DDC)
Pin 8 : N.C.
Pin 9 : D1_RX - (T.M.D.S.)
Pin 10 : D1_RX + (T.M.D.S.)
Pin 11 : GND (Data 1 shield)
Pin 12 : N.C.
Pin 21 : N.C.
Pin 22 : GND (Clock shield)
Pin 23 : CK_RX + (T.M.D.S.)
Pin 24 : CK_RX - (T.M.D.S.)
VIDEO INPUT XVGA Connection (DSUB15 female connector)
Pin 1 : R-in
Pin 2 : G-in
Pin 3 : B-in
Pin 4 : N.C.
Pin 5 : N.C.
Pin 6 : GND
Pin 7 : GND
Pin 8 : GND
Pin 9 : N.C.
Pin 10 : GND
Pin 11 : N.C.
Pin 12 : SDA (For DDC option)
Pin 13 : H.S.-in
Pin 14 : V.S.-in
Pin 15 : SCL (For DDC option)
MCL1801
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL DESCRIPTION
On the front bottom side part of the unit the following controls are placed:
- BRIGHTNESS ADJ-
- BRIGHTNESS ADJ+
- MENU SELECT - / BRIGHTNESS Recall to 200 Cd/m²
- MENU SELECT +
- ENTER (Store/Source-Select)
Light sensor
LED
GREEN= 200 cd/m² / Power-on
RED < 200 cd/m²
me
nu
ORANGE= Stand-by
fig. 14a
Power Switch
menu
Brightness
Adjust -
Enter
Brightness
Adjust +
Menu select +
Menu select -
MCL1801
14
Download from Www.Somanuals.com. All Manuals Search And Download.
(OSD) ON SCREEN DISPLAY
MENU STRUCTURE
MAIN MENU
│
├─────
INFORMATION
│
│
├─────
└─────
CODE VERSION
EXIT
│
├─────
IMAGE ADJUST
│
│
├─────
├─────
HORIZONTAL POSITION
VERTICAL POSITION
│
├─────
SCALE / CENTER ─────┐
│
│
├─────
FULL SCREEN
│
│
│
│
├─────
└─────
MAINTAIN ASPECT RATIO
CENTER
│
├─────
IMAGE ENHANCEMENT
│
│
├─────
ABC SELECTION
│
│
│
├─────────────ABC OFF
│
│
│
├─────────────ABC REDUCED
│
│
│
└─────────────ABC FULL
│
│
├─────
TRANSFER FUNCTION
│
│
│
│
│
│
│
│
│
│
│
│
├─────────────6500° K
├─────────────7600° K
├─────────────9300° K
├─────────────DICOM
└─────────────TG3
│
│
│
│
│
└─────
EXIT
│
├─────
ADVANCED
───────┐
│
│
│
│
│
│
├─────
├─────
├─────
PHASE ADJUST
CLOCK ADJUST
SERVICE ─┐
│
│
│
├─────────────OFFSET RED ADJUST
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
├─────────────OFFSET GREEN ADJUST
├─────────────OFFSET BLUE ADJUST
├─────────────GAIN RED ADJUST
├─────────────GAIN GREEN ADJUST
├─────────────GAIN BLUE ADJUST
├─────────────STORE VIDEO
│
│
│
└─────────────EXIT
│
│
│
│
├─────
│
AUTO-SETUP OPTIONS
├─────────────AUTO-SETUP ON MODESET
│
│
│
│
│
│
│
│
│
│
│
│
├────────────── ENABLED
├────────────── DISABLED
└────────────── ONLY ONCE
│
│
│
├─────────────AUTO-CLOCK FEATURE
│
│
│
│
│
│
│
│
├────────────── ENABLED
└────────────── DISABLED
│
│
│
└─────────────EXIT
│
│
│
│
│
│
│
│
├─────
├─────
├─────
├─────
└─────
AUTO-(PHASE/POSITION)
AUTO-(CLOCK/POSITION)
AUTO-LEVEL
RESTORE FACTORY PRESETS
EXIT
│
│
│
└─────
EXIT
│
├─────
LANGUAGES
│
│
│
│
├─────
├─────
├─────
├─────
└─────
ENGLISH
FRANCAIS
DEUTSCH
ESPANOL
ITALIANO
│
│
├─────
│
OSD SETTING
├─────
OSD POSITION ──────┐
├─────
│
│
│
│
│
│
HORIZONTAL POSITION
VERTICAL POSITION
EXIT
├─────
└─────
│
├─────
OSD SIZE
────────┐
│
│
│
│
├─────
└─────
NORMAL
DOUBLE
│
├─────
OSD TRANSPARENCY
│
│
├─────
│
OSD TIMEOUT ──────┐
├───── 10 Sec.
│
│
│
│
│
│
│
│
│
│
│
│
│
│
├───── 20 Sec.
├───── 30 Sec.
├───── 45 Sec.
├───── 60 Sec.
├───── 90 Sec.
├───── 120 Sec.
└───── DISABLED
│
└─────
EXIT
│
├─────
VIDEO SOURCE
│
│
│
│
├─────
├─────
├─────
└─────
DSUB-SOG (GREEN INPUT)
DVI
DSUB (HT. AND VT. SYNC.)
EXIT
│
├─────
│
KEYBOARD OPTION
├─────
KEYBOARD UNLOCK
KEYBOARD LOCK
│
└─────
│
└─────
EXIT
MCL1801
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD KEY FUNCTIONS
Function
Enter
Key
Description
N
It activates the OSD MAIN MENU if this is not active, otherwise selects and
executes a desired OSD Special Function.
Adjust -
Adjust +
Menu -
Menu +
When main menu or sub-menu is active, it allows to move or scroll to the
previous (upper) item or decrement the magnitude of the parameter.
When main menu or sub-menu is active, it allows to move or scroll to the
previous (down) item or increment the magnitude of the parameter.
Pressing “Enter” key the MAIN MENU highlight selection is the first Sub-menu item “Video Information”
Pressing “Menu +” or “Menu -” key, the highlight selection of menu item moves downward/ upward
Pressing “Enter” key, the current menu window disappears and is replaced by the new sub-menu windows.
6.0.0 OSD (ON SCREEN DISPLAY) CONTROLS
6.1.0 Main manu
After the activation of OSD Main Menu appears the following window
Information
i
Image Adjust
E
Languages
OSD Settings
Video Source
Keyboard Option
Exit
1024 x 768 @ 60 Hz - DSUB
Information
Image Adjust
Languages
It shows the hardware and firmware status (operating hours and release number)
To adjust the picture when it is not correct
To select the correct language
i
OSD Settings
Video Source
Keyboard Option
Exit
To adjust the OSD options (position, attribute activity delay)
To select the correct video input source
To select the keyboard status.
To exit from “MAIN MENU” .
MCL1801
16
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2.0 Information
1) Press Enter button when the Information is highlighted on Main menu.
The Information window appears.
MCL1801
Ver CO.62-DO.62
h00002
Model
Firmware Release
Operating Hours
Video timing number
c1B
3) To press Enter buttton to return to Main Menu.
Information
FIMI-Philips
MCL1801
Ver CO.62-DO.62 h00002 c1B
Exit
6.3.0 Image Adjust
1) Press Enter button when the Image Adjust is highlighted on Main Menu.
The Image Adjust window appears.
Image Adjust
Horizontal Position
Vertical position
Scale / Center
Image Enhancement
Advanced
Exit
6.3.1 Horizontal Position
1) Press Enter button when the Horizontal Position is highlighted on Image Adjust.
The Horizontal Position bar appears.
Image Adjust
Horizontal Position
Vertical position
Scale / Center
Image Enhancement
Advanced
Exit
2) Press Adjust + or Adjust - button to move the image to the left or right
3) When the position is adjusted, press the Enter button to return to Image Adjust window
4) To select Exit and press again Enter buttton to return to Main Menu or select Vertical Position.
MCL1801
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.2 Vertical Position
1) Press Enter button when the Vertical Position is highlighted on Image Adjust.
The Vertical Position bar appears.
Image Adjust
Horizontal Position
Vertical position
Scale / Center
Image Enhancement
Advanced
Exit
2) Press Adjust + or Adjust - button to move the image to the up or down
3) When the position is adjusted, press the Enter button to return to Image Adjust window
4) To select Exit and press again Enter button to return to Main Menu or select Scale / Center
6.3.3 Scale / Center
1) Press Enter button when the Scale / Center is highlighted on Image Adjust.
The Scale / Center window appears.
Scale / Center
Full Screen
Maintain Aspect Ratio
Center
The ON SCREEN DISPLAY shows the three modes available.
The default is Full Screen, but you can select Maintain Aspect Ratio or Center.
2) Press the Adjust + or Adjust - button to change the video mode, the choosen mode is highlighted.
3) Press the Enter button to confirm your selection and return to Image Adjust window
6.3.4 Image Enhancement
1) Press Enter button when the Image Enhancement is highlighted on Image Adjust.
The Image Enhancement window appears.
Image Enhancement
ABC selection
Transfer Function
Exit
2) Press the Menu + or Menu - button until the desired item is highlighted.
MCL1801
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.5 ABC Selection
1) Press Enter button when the ABC Selection is highlighted on Image Enhancement
The ABC Selection window appears.
ABC Selection
ABC Off
ABC Reduced
ABC Full
2) Press the Adjust + or Adjust - button until the desired item is highlighted.
- ABC off
Manual back light control regulated by panel button from 80 cd/m² to 200 cd/m²
- ABC full
Automatic control of back light, the back light is function of ambient light and follow a semilogaritmic
courve from 80 cd/m² (at 1 lux) to 200 cd/m² (at 1000 lux).
-ABC reduced
The same as ABC full but with full scale of 140 cd/m² (at 1000 lux).
3) Press the Enter button to confirm your selection and return to Image Enhancement window
6.3.6 Transfer Function
1) Press Enter button when the Transfer Functiopn is highlighted on Image Enhancement
The Transfer Function window appears.
Transfer Function
6500° K
7600° K
9300° K
DICOM
TG3
2) Press the Adjust + or Adjust - button until the desired item is highlighted.
Five colour temperature preset modes:
- 6500° K
DTP
- 7600° K
Photo retouch
- 9300° K
CAD/CAM
- DICOM
The output curve follows the DICOM curve
- TG3
The output curve is the same as PMS standard monitor.
3) Press the Enter button to confirm your selection and return to Image Enhancement window
6.3.7 Advanced
1) Press Enter button when the Adavanced is highlighted on Main Menu
The Advanced window appears.
MCL1801
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Phase Adjust
Clock Adjust
Service
Auto-Setup Options
Auto-(Phase/Position)
Auto-(Clock/Position)
Auto-Level
Restore Factory Presets
Exit
2) Press the Menu + or Menu - button until the desired source is highlighted.
6.3.8 Phase Adjust
1) Press Enter button when the Phase Adjust is highlighted on Advanced.
The Phase Adjust bar appears.
2) Press Adjust + or Adjust - button to adjust the quality image
Note: It is necessary to use video pattern dedicated to obtain the best result
3) When the position is adjusted, press the Enter button to return to Advanced window
4) Select Exit and press again Enter button to return to Image Adjust or select Clock Adjust.
Advanced
Phase Adjust
Clock Adjust
Service
Auto-Setup Options
Auto-(Phase/Position)
Auto-(Clock/Position)
Auto-Level
Restore Factory Presets
Exit
6.3.9 Clock Adjust
1) Press Enter button when the Clock Adjust is highlighted on Advanced.
The Clock Adjust bar appears.
2) Press Adjust + or Adjust - button to adjust the quality image
Note: It is necessary to use video pattern dedicated to abtain the best result
3) When the position is adjusted, press the Enter buton to return to Advanced window
4) To select Exit and press again Enter button to return to Image Adjust or select Service.
Advanced
Phase Adjust
Clock Adjust
Service
Auto-Setup Options
Auto-(Phase/Position)
Auto-(Clock/Position)
Auto-Level
Restore Factory Presets
Exit
MCL1801
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.10 Service
1) Press Enter button when the Service is highlighted on Advanced.
The Service window appears.
2) Press Menu + or Menu - button until the desired item is highlighted and press Enter.
3) Press Adjust + or Adjust - button to adjust the quality image
4) When the item is adjusted, press the Enter button to return to Service window
5) Offest and Gain are items to use to calibrate the video signal (valid only for DSUB / DSUB/SOG video source).
When the calibration is OK it is necessary to execute the store operation to preserve the new values.
Press Enter buton when the Store Video is highlighted.
6) Select Exit and press again Enter button to return to Advanced or select Auto-Setup Options.
Service
Offset Red Adjust
Offset Green Adjust
Offset Blue Adjust
Gain Red Adjust
Gain Green Adjus
Gain Blue Adjust
Store Video
Exit
16
6.3.11 Auto-Setup Options
1) Press Enter button when the Auto-Setup Options is highlighted on Advanced.
The Auto-Setup Options window appears.
2) Press Menu + or Menu - button to select automatic options.
Auto-Setup Options and Auto-Clock feature define the modality of Auto-Adjust of the video image when the video
timing is recognized.
3) Select Exit and press again Enter button to return to Advanced or select Auto-Level.
Auto-Setup Options
Auto-Setup On Modeset
Auto-Clock Feature
Exit
6.3.12 Auto-Setup On Modest
1) Press Enter button when the Auto-Setup On Modest is highlighted on Auto-Setup Options.
The Auto-Setup On Modest window appears.
2) Press Adjust + or Adjust - button until the desired item is highlighted
3) Press the Enter button to confirm your selection and return to Auto-Setup Options window
MCL1801
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto-Setup On Modest
Enabled
Disabled
Only Once
Enabled
Every time the video timing changes
Disabled
Only Once
Never
Only the first time that the video timing is recognized.
6.3.13 Auto-Clock Feature
1) Press Enter button when the Auto-Clock Feature is highlighted on Auto-Setup Options.
The Auto-Clock Feature window appears.
2) Press Adjust + or Adjust - button until the desired item is highlighted
3) Press the Enter button to confirm your selection and return to Auto-Setup Options window
Auto-Clock Feature
Enabled
Disabled
Enabled
Disabled
Every time the video timing changes
Never
6.3.14 Auto-(Phase/Position)
1) Press Enter button when the Auto-(Phase/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-(Clock/Position).
6.3.15 Auto-(Clock/Position)
1) Press Enter button when the Auto-(Clock/Position) is highlighted on Advanced.
To perform an automatic adjustmant of the video image.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust or select Auto-Level.
6.3.16 Auto-Level
1) Press Enter button when the Auto-Level is highlighted on Advanced.
To perform an automatic calibration of the video signal.
Valid only DSUB-SOG and DSUB video source.
2) Select Exit and press again Enter button to return to Image Adjust.
MCL1801
22
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3.17 Restore Factory Preset
1) Press Enter button when the Restore Factory Preset is highlighted on Advanced.
To reload factory settings.
2) Select Exit and press Enter button toreturn to Image Adjust.
6.4.0 Languages
1) Press Enter button when the Languages is highlighted on Main Menu.
The Languages window appears.
The ON SCREEN DISPLAY shows the five languages available.
The default is English, but you can select Français, Deustch, Español or Italiano.
2) Press the Adjust + or Adjust - button until the desired item is highlighted.
3) Press the Enter button to confirm your selection and return to Main Menu window
Languages
English
Français
Deustch
Español
Italiano
6.5.0 OSD Settings
1) Press Enter button when the OSD Settings is highlighted on Main Menu.
The OSD Settings window appears.
2) Press the Menu + or Menu - button until the desired item is highlighted.
OSD Settings
OSD Position
OSD Size
OSD Transparency
OSD Timeout
Exit
6.5.1 OSD Position
1) Press Enter button when the OSD Position is highlighted on OSD Settings.
The OSD Positions window appears.
2) Press the Menu + or Menu - button until the desired item is highlighted.
OSD Position
Horizontal Position
Vertical position
Exit
MCL1801
23
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5.2 OSD Horizontal Position
1) Press Enter button when the Horizontal Position is highlighted on OSD Position.
The Horizontal Position bar appears.
OSD Position
Horizontal Position
Vertical position
Exit
2) Press Enter button and Adjust + or Adjust - button to move the OSD image to RIGHT or to the LEFT.
3) When the position is adjusted, press the Enter button to return to OSD Position window
4) Select Exit and press again Enter button to return to OSD Settings
6.5.3 OSD Vertical Position
1) Press Enter button when the Vertical Position is highlighted on OSD Position.
The Vertical Position bar appears.
OSD Position
Horizontal Position
Vertical position
Exit
2) Press Enter button and Adjust + or Adjust - button to move UP or DOWN the OSD image .
3) When the position is adjusted, press the Enter button to return to OSD Position window
4) Select Exit and press again Enter button to return to OSD Settings.
6.5.4 OSD Size
1) Press Enter button when the OSD Size is highlighted on OSD Settings.
The OSD Size window appears.
OSD Size
Normal
Double
2) Press the Adjust + or Adjust - button until the desired item is highlighted.
Normal Standard dimensions
Double Double dimension
3) Press the Enter button to confirm your selection and return to OSD Settings window
MCL1801
24
Download from Www.Somanuals.com. All Manuals Search And Download.
6.5.5 OSD Transparency
1) Press Enter button when the OSD Transparency is highlighted on OSD Settings.
The OSD Transparency bar appears.
OSD Settings
OSD Position
OSD Size
OSD Transparency
OSD Timeout
Exit
2) Press Enter button and Adjust + or Adjust - button to choose the degree of transparency of the OSD image
3) When the position is adjusted, press the Enter button to return to OSD Settings window
4) Select Exit and press again Enter button to return to OSD Main Menu.
6.5.6 OSD Timeout
1) Press Enter button when the OSD Timeout is highlight on OSD Settings.
The OSD Timeout bar appears.
OSD Timeout
10 Sec.
20 Sec.
30 Sec.
45 Sec.
60 Sec.
90 Sec.
120 Sec.
Disabled
2) Press Enter button and Adjust + or Adjust - button to choose the time of activation of the OSD-Menu.
3) Press the Enter button to confirm your selection and return to OSD Settings windows.
6.6.0 Video Source
The ON SCREEN DISPLAY shows the four sources available.
The default is - DSUB (*) (D-sub input Video with separated syncr.).
but you can select:
- DSUB-SOG (D-sub input Video with Syncr. On Green)
- DVI (Digital Video Input)
1) Press Enter button when the Video Source is highlighted on Main menu.
The Video Source window appears.
2) Press the Adjust + or Adjust - button until the desired source is highlighted.
3) Press the Enter button to confirm your selection and exit from OSD Main Menu.
Video Source
DSUB-SOG (Green Input)
DVI
DSUB (Ht. and Vt. Sync.)
Exit
(*) see next page
MCL1801
25
Download from Www.Somanuals.com. All Manuals Search And Download.
(*)
Video Source
If the Video Signal is not available a warning message will appear on the screen for about 5 sec.
Check Input Signal
(XXX)
XXX= Current Video Source (DVI,DSUB,SOG)
After about 5 sec. the monitor will go in Stand-By mode.
The led colour will become orange.
To change the Video Source when the Video Source is not available to follow the followings steps:
- Wait the Warning Message.
- Press contemporarily the brightness keys.
- When the Warning message disappears
- Release the brightness keys.
- Execute the normal change of the Video Source. (see ref. 6.6.0)
6.7.0 Keyboard Option
1) Press Enter button when the Keyboard Option is highlight on Main Menu.
The Keyboard Option bar appears.
Keyboard Option
Keyboard Unlock
Keyboard Lock
2) Press the Adjust + or Adjust - button until the desired item is highlighted..
3) Press the Enter button to confirm your selection and return to Main Menu window
REMARK:
To select the Keyboard status “LOCK or UNLOCK”, use the Keyboard Option Menu.
(The new status is stored in E2prom, the default status is UNLOCK).
If the Keyboard Status is UNLOCK any key and any OSD function is available.
If the Keyboard Status is LOCK:
- (Brightness +), . (Brightness -) and Reference Setting Recall (200 Cd/m2) are always available.
- Pressing OSD key, will appear the dialog of Fig. 26a
The OSD menu will appear after having performed the follow correct keys sequence:
○ Brightness -
○ Brightness +
○ Brightness +
○ Menu -
The dialog (Fig. 26a) will disappear any time a wrong key will be pressed.
For every right key pressed a “plus” characters appears in dialog of Fig. 26a.
KEYBOARD LOCK
Fig.26a
MCL1801
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INTENTIONALLY LEFT BLANK
Download from Www.Somanuals.com. All Manuals Search And Download.
3119 206 1407.1
Download from Www.Somanuals.com. All Manuals Search And Download.
|