Philips CRT Television 13PR19C1 User Manual

Color Television  
13PR19C1  
Instructions for use  
3135 015 10361  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS - Read before operating equipment  
This product was designed and manufactured to meet strict quality and  
safety standards. There are, however, some installation and operation pre-  
cautions which you should be particularly aware of.  
11. Power-Cord Protection - Power supply cords should be routed so  
that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords and plugs,  
convenience receptacles, and the point where they exit from the  
appliance.  
1. Read Instructions - All the safety and operating instructions should  
be read before the appliance is operated.  
12. Cleaning - The appliance should be cleaned only as recommended  
2. Retain Instructions - The safety and operating instructions should  
by the manufacturer.  
be retained for future reference.  
13. Power Lines - An outdoor antenna should be located away from  
3. Heed Warnings - All warnings on the appliance and in the operating  
power lines.  
instructions should be adhered to.  
14. Outdoor Antenna Grounding - If an outside antenna is connected to  
the receiver, be sure the antenna system is grounded so as to pro-  
vide some protection against voltage surges and built up static  
charges.  
4. Follow Instructions - All operating and use instructions should be  
followed.  
5. Water and Moisture - The appliance should not be used near water  
- for example, near a bathtub, washbowl, kitchen sink, laundry tub,  
in a wet basement or near a swimming pool, etc.  
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,  
provides information with respect to proper grounding of the mats  
and supporting structure grounding of the lead-in wire to an anten-  
na discharge unit, size of grounding connectors, location of antenna-  
discharge unit, connection to grounding electrodes and require-  
ments for the grounding electrode. See Fig. below.  
6. Carts and Stands - The appliance should be used only with a cart or  
stand that is recommended by the manufacturer.  
6A.  
An appliance and cart combination should be moved  
with care. Quick stops, excessive force, and uneven sur-  
faces may cause the appliance and cart combination to  
overturn.  
15. Non-use Periods - The power cord of the appliance should be  
unplugged from the outlet when left unused for a long period of time.  
16. Object and Liquid Entry - Care should be taken so that objects do not  
6B. Tilt/Stability - All televisions must comply with recommended inter-  
national global safety standards for tilt and stability properties of its  
cabinet design.  
fall and liquids are not spilled into the enclosure through openings.  
17. Damage Requiring Service - The appliance should be serviced by  
Do not compromise these design standards by applying exces-  
sive pull force to the front, or top, of the cabinet which could  
ultimately overturn the product.  
Also, do not endanger yourself, or children, by placing elec-  
tronic equipment/toys on the top of the cabinet. Such items  
could unsuspectingly fall from the top of the set and cause  
product damage and/or personal injury.  
qualified service personnel when:  
A. The power supply cord or the plug has been damaged; or  
B. Objects have fallen, or liquid has been spilled into the appliance;  
or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or exhibits a  
marked change in performance; or  
7. Wall or Ceiling Mounting - The appliance should be mounted to a  
E. The appliance has been dropped, or the enclosure damaged.  
wall or ceiling only as recommended by the manufacturer.  
18. Servicing - The user should not attempt to service the appliance  
beyond that described in the operating instructions. All other servic-  
ing should be referred to qualified service personnel.  
8. Ventilation - The appliance should be situated so that its location or  
position does not interfere with its proper ventilation. For example,  
the appliance should not be situated on a bed, sofa, rug, or similar  
surface that may block the ventilation openings; or, placed in a built-  
in installation, such as a bookcase or cabinet that may impede the  
flow of air through the ventilation openings.  
9. Heat - The appliance should be situated away from heat sources  
such as radiators, heat registers, stoves, or other appliances (includ-  
ing amplifiers) that produce heat.  
Note to the CATV system installer: This reminder is provided to call the  
CATV system installer's attention to Article 820-40 of the NEC that pro-  
vides guidelines for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of the building,  
as close to the point of cable entry as practical.  
10. Power Sources - The appliance should be connected to a power sup-  
ply only of the type described in the operating instructions or as  
marked on the appliance.  
Example of Antenna Grounding  
as per NEC - National Electric Code  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
ELECTRIC SERVICE EQUIPMENT  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Introduction  
Here are a few of the special features built into this  
new Color Television:  
Welcome/Registration of Your TV ............................2  
Safety/Precautions .....................................................3  
Table of Contents.......................................................4  
Features......................................................................4  
Basic Cable TV Hookups ..........................................5  
Basic Antenna Hookups.............................................6  
Basic TV to VCR Hookup.........................................7  
Basic TV and Remote Operations .............................8  
TV Remote Buttons ...................................................9  
SmartLock™ feature allows you to block the view-  
ing of certain channel or external audio/video con-  
nections where you might not want your children  
viewing inappropriate material.  
Infrared Remote Control works your TV set.  
Standard broadcast (VHF/UHF) or Cable TV  
(CATV) channel capability.  
Closed Captioning allows the viewer to read TV  
program dialogue or voice conversations as onscreen  
text.  
Onscreen MENU  
Setting the Language Control.................10  
Using the Tuner Control...................................11  
Using the Auto Program Control .....................12  
How to Add and Delete Channels....................13  
Using the External Control (Input Naming)....14  
Adjusting the TV Picture .................................15  
Activating Contrast Plus (Black Stretch).........16  
Activating Noise Reduction (Picture) Control 17  
Setting the TV’s Clock.....................................18  
Activating the Timer Control...........................19  
Activating the Start-Up Channel .....................20  
Setting the TV’s Start Time Control................21  
Setting the TV for Closed Caption ..................22  
Using the Sleep Timer Control........................23  
Automatic Programming of Channels for quick  
and easy selection of favorite stations available in  
your area.  
Onscreen Features (in either English, French, or  
Spanish) show helpful messages for setting of TV  
controls.  
Sleeptimer automatically turns the TV OFF at preset  
times.  
SmartPicture™ allows you to set the picture color,  
tint, contrast, etc. for various types of programming  
such as Personal (picture controls the way you set  
them), Sports, Movies, or Weak Signals with the push  
of one button.  
SmartLock™  
Understanding the SmartLock Feature.......24  
Setting the SmartLock Access Code................25  
Setting the SmartLock to Block Channels.......26  
Setting SmartLock’s Blocking Options ...........27  
Blocking Using the Movie/TV Ratings .....28-29  
Using the SmartLock Review Screen..............30  
SmartSound™ controls allow you to set the sound  
controls for various types of listening programs such  
as Personal (sound controls the way you set them),  
Theater, Music, or Voice with the push of one button.  
Sound  
Using the Treble Boost and  
Bass Boost controls..........................................31  
Using the Volume Bar Control ........................31  
Using the Input control and  
the Audio/Video Input Jacks............................32  
NOTE: This owner's manual is used with sev-  
eral different television models. Not all fea-  
tures (and drawings) discussed in this manual  
will necessarily match those found with your  
television system. This is normal and does not  
require you contacting your dealer or request-  
ing service.  
Remote Control Operation  
Using the SmartPicture™ Control................33  
Using the SmartSound™ (AVL) Control......34  
Using SmartSurf™ (Alternate Channel) .................35  
General Information  
Tips if Something Isn’t Working ................36  
Glossary of TV Terms..............................................37  
Index ........................................................................37  
Factory Service Locations..................................38-39  
Warranty...................................................................40  
SmartPicture™, SmartSound™, SmartSurf™, and SmartLock™ are all  
registered trademarks of Philips Consumer Electronics Company.  
Copyright © 1999 Philips Consumer Electronics Company. All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)  
SMART  
CABLE TV  
HELP  
our Cable TV input into your  
Yhome may be a single (75  
ohm) cable, or a Converter Box  
installation. In either case the  
connection to the TV is very easy.  
Just put the threaded end of the  
cable signal to the TV's antenna  
plug and screw it down tight.  
BEGIN  
Remember:  
Set the TV for the  
type signal you've  
just connected (see  
the “Tuner” section  
on page 11 of this  
manual.)  
To select only the  
channel numbers on  
your Cable system  
see “Auto Program"  
(page 12). If you use  
a Cable Converter  
box, set the TV to the  
same channel as the  
converter's CH 3/4  
switch (on the rear of  
the converter.)  
If your Cable TV signal is a sin-  
gle round cable (75 ohm) then  
you're ready to connect to the TV.  
If you have a Cable Converter  
Box:  
Connect the Cable TV signal to the  
Cable Signal IN(put) plug on the  
Converter..  
V
ID  
E
O
IN  
75  
AU  
D
IO  
Connect the Cable TV cable to the  
75plug on the TV.  
If you have a Cable Converter Box:  
Connect the OUT(put) plug from the  
Converter to the 75plug on the TV.  
1
Cable TV Company  
Cable TV Signal Input  
VIDEO  
AUDIO  
IN  
OR  
75  
OUT  
IN  
Round Cable  
75Ohm  
Back of TV  
2
Cable TV Converter  
Box Connection  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)  
SMART  
ANTENNA  
HELP  
combination antenna receives  
Anormal broadcast channels  
(VHF 2-13 and UHF 14-69).  
Your connection is easy since  
there is only one 75(ohm)  
antenna plug on the back of your  
TV - and thats where the antenna  
goes.  
Remember:  
Be sure to set the  
TV for the type sig-  
nal you've connect-  
ed (see the “Tuner”  
section on page 11  
of this manual.)  
Note: For homes with separate UHF and VHF antennas  
you will need an optional combiner to connect to the TV.  
U/V  
Combiner  
BEGIN  
To set the TV to  
select only the chan-  
nel numbers in your  
area see how to  
“Program" or "Add"  
channels in the TV’s  
memory on page 12  
(Auto Program sec-  
tion).  
If your antenna has a round  
cable (75 ohm) on the end, then  
you're ready to connect it to the TV.  
If your antenna has flat twin-lead  
wire (300 ohm), you first need to  
attach the antenna wires to the screws  
on a 300 to 75 ohm adapter.  
V
ID  
E
O
IN  
A
U
D
IO  
75  
Back of TV  
75-300 Ohm Adapter  
Push the round end of the adapter  
(or antenna) onto the 75plug  
on the rear of the TV. If the round  
end of the antenna wire is threaded,  
screw it down tight.  
To order any option-  
al accessory contact  
your dealer or the  
Philips Parts Center  
at 1-800-851-8885.  
V
ID  
E
O
IN  
A
U
D
IO  
75  
Combination VHF/UHF  
Antenna  
(Outdoor or Indoor)  
2
300 to 75Ω  
Adapter  
1
VIDEO  
Twin Lead  
Wire  
IN  
OR  
AUDIO  
75  
Round Cable  
75Ω  
Back of TV  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)  
TV TO VCR  
he basic Antenna, or Cable  
TTV, to VCR to TV connection  
is shown to the right. For more  
information on other hookups  
(possible when Cable  
Converter/Descrambler boxes are  
included) refer to your accessory  
VCR and Cable Converter  
Owner's Manual for details.  
BEGIN  
Connect your Antenna or Cable  
TV signal to the IN FROM  
ANT(enna) plug on the VCR.  
Connect the OUT TO TV plug  
on the VCR to the 75plug on the  
TV (connecting cable supplied with  
the VCR.)  
V
ID  
E
O
IN  
A
U
D
IO  
75  
Outdoor  
VHF/UHF  
Antenna  
300 to 75Ω  
Ohm Adapter  
1
2
OR  
OUT TO TV  
IN FROM ANT.  
VIDEO  
AUDIO  
IN  
75  
Cable TV signal  
VCR  
Back of TV  
Round Cable  
75Supplied with VCR  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC TV/REMOTE OPERATIONS  
TELEVISION  
BEGIN  
Press the POWER button to  
turn the TV ON.  
6
Press the VOLUME + button to  
increase the sound level or the  
VOLUME – button to lower the  
sound level.  
The Front Audio/Video Input Jacks  
make it real easy to watch the playback  
of a video tape using a camcorder  
(or any accessory device) with  
Audio/Video Output Jacks.  
Pressing both buttons at the same  
time will display the onscreen menu.  
Once in the menu, use these button  
to make adjustments or selections.  
IN  
ME  
S
T
N
A
LL  
U
/
VIDEO  
AUDIO  
VO  
LUME  
+
C
H
A
N
N
E
L
POWER  
Remote Sensor Window  
Press the CHANNEL UP or  
DOWN button to select TV chan-  
nels.  
Front Audio/Video Inputs (Mono)  
MENU  
VIDEO  
AUDIO  
VOLUME +  
CHANNEL  
POWER  
REMOTE  
1
BATTERY INSTALLATION  
3
2
o load the supplied batteries  
Tinto the remote:  
1. Remove the battery compart-  
ment lid on the back of the remote.  
POWE
SLEEP  
CLOCK  
2. Place the batteries (2-AA) in  
the remote. Be sure the (+) and (-)  
ends of the batteries line up correctly  
(inside of case is marked.)  
CC  
3
Point the remote control  
toward the remote sensor  
window on the TV when  
operating the TV with the  
remote.  
SURF  
TUS  
A
ST  
EXIT  
A/CH  
MENU  
CH  
MUTE  
T
SMAR  
T
VOL  
SMAR  
PICTURE  
SOUND  
3. Reattach the battery lid.  
SMART HELP  
Remember,  
You can press  
The tuned channel  
number will always  
You can also press the  
STATUS/EXIT button  
any button on the front  
of the TV to turn the  
TV ON.  
briefly appear when the (on the remote) to see  
TV is first turned ON  
(and with channel  
changes.)  
what channel the TV is  
ON.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV REMOTE BUTTONS  
Power Button  
Press to turn the TV ON and OFF.  
POWER  
SLEEP  
Sleep Button  
Press to set the TV to automatically turn itself OFF.  
CC Button  
Press to select Closed Caption options within the menu.  
CC  
CLOCK  
Clock Button  
Press for direct entry of the TIMER (Clock) features were you can set  
the TV’s clock, the Start Time, and the Start Channel Controls.  
1
4
2
5
8
0
3
6
9
Number Buttons  
Press the number buttons to select TV channels. For single digit entries,  
press the number of the channel you desire. The TV will pause for a few  
seconds, then change to the selected channel. For channels 100 and  
above, press "1" then the next two numbers. (Example, Press "1", then  
"2", then "5" for channel 125.)  
7
A/CH Button  
Press to toggle between the currently viewed channel and the previously  
viewed channel.  
A/CH  
SURF  
Surf Button  
STATUS  
Press to select previously viewed channels. You can place up to 8 channels  
in memory. Then by pressing the SURF button you can quickly view the  
select channels. See the “Surf" section to see how to select a series of  
channels using the Surf button.  
MENU  
EXIT  
Menu Button  
Press for the onscreen menu to appear. Pressing the menu button after  
menu selections are made will eliminate the menu from the display.  
Status/Exit Button  
Press to see the current channel number on the TV screen. Also press to  
clear the TV screen after control adjustments.  
Cursor Buttons  
Use these button to select and adjust the TV's onscreen menu.  
VOL  
CH  
Volume (+), (–) Buttons  
Press to adjust the TV sound level.  
MUTE  
SMART  
SMART  
Mute Button  
Press to turn the sound OFF on the TV. Press again to return the  
sound to its previous level.  
SOUND PICTURE  
Smart Sound Button  
Press to select from a list of Smart Sound controls. (Factory preset  
sound control levels set for different types of listening sources and  
programs.)  
Smart Picture Button  
Press to select from a list of Smart Picture controls. (Factory preset  
picture control levels set for different types of viewing sources and  
programs.)  
Channel (+), (–) Buttons  
Press to change the tuned channel.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE LANGUAGE CONTROL  
or our Spanish and French speak-  
Fing TV owners an onscreen LAN-  
GUAGE option is present. With the  
LANGUAGE control you can set the  
TVs onscreen menu to be shown in  
either English, Spanish, or French.  
BEGIN  
Press the MENU button on the  
remote to show the onscreen menu.  
CLOCK  
CC  
OFF  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the onscreen menu until the word  
SETUP is highlighted.  
SETUP  
SmartLock REVIEW  
BRIGHTNESS  
30  
LANGUAGE  
TUNER  
ENGLISH  
CABLE  
AUTO PROGRAM  
Press the CURSOR RIGHT ᮣ  
button to display the SETUP menu  
features.  
POWER  
LANGUAGE  
LANGUAGE  
FRANCAIS  
ESPANOL  
Press CURSOR UP or  
DOWN buttons to scroll the  
Setup features until the word LAN-  
GUAGE is highlighted.  
CC  
CLOCK  
SLEEP  
or  
1
4
2
5
8
0
3
6
9
7
4
Press the CURSOR RIGHT ᮣ  
button repeatedly to select ENG-  
LISH, ESPANOL (Spanish), or  
FRANCAIS (French).  
1
2
A/CH  
S
S  
MENU  
EXIT  
3
5
VOL  
CH  
MUTE  
SMART  
SMART  
SMART HELP  
SOUND PICTURE  
Remember: The Language  
control only makes the TV’s  
onscreen MENU items appear in  
English, Spanish, or French text.  
It does not change the other onscreen  
text features such as Closed Caption  
(CC) TV shows.  
The onscreen menu will time out and  
disappear from the screen when you  
finish, or you can press the STA-  
TUS/EXIT button to clear the menu  
from the screen.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE TUNER CONTROL  
he TUNER feature allows you to  
Tchange the TVs signal input to  
either CABLE, AUTO or ANTENNA  
mode. Its important for the TV to  
know what type of signal to look for.  
(From a Cable TV signal or a nor-  
mal Antenna signal.) In the AUTO  
mode, when the AUTO PROGRAM  
feature is activated, the TV will auto-  
matically choose the correct mode.  
CLOCK  
CC  
OFF  
BEGIN  
SETUP  
Press the MENU button on the  
remote to show the onscreen menu.  
SmartLock REVIEW  
BRIGHTNESS  
LANGUAGE  
TUNER  
ENGLISH  
CABLE  
30  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the onscreen menu until the word  
SETUP is highlighted.  
AUTO PROGRAM  
CHANNEL EDIT  
POWER  
TUNER  
AUTO  
Press the CURSOR RIGHT ᮣ  
button to display the SETUP menu  
features.  
CC  
CLOCK  
SLEEP  
TUNER  
ANTENNA  
1
4
2
5
8
0
3
6
9
Press CURSOR UP or  
DOWN buttons to scroll the  
Setup features until the word  
TUNER is highlighted.  
7
4
1
2
A/CH  
S
S  
MENU  
EXIT  
Press the CURSOR RIGHT ᮣ  
button to select either CABLE,  
AUTO or ANTENNA mode.  
3
5
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
SMART HELP  
When CABLE is selected,  
channels 1-125 are available.  
When ANTENNA is selected, chan-  
nels 2-69 are available.  
When AUTO is selected, the TV will  
automatically set itself to the correct  
mode based on the type of signal it  
detects when the AUTO PROGRAM  
feature is activated.  
The onscreen menu will time out and  
disappear from the screen when you  
finish, or you can press the STA-  
TUS/EXIT button to clear the menu  
from the screen.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE AUTO PROGRAM CONTROL  
our TV can automatically set itself  
Yfor local area (or Cable TV) chan-  
nels. This makes it easy for you to  
select only the TV stations in your  
area when the CHANNEL (+), (–) but-  
tons are pressed.  
Note: Make sure the antenna or cable  
signal connection has been completed  
before AUTO PROGRAM is used.  
CLOCK  
CC  
OFF  
BEGIN  
SETUP  
LANGUAGE  
TUNER  
ENGLISH  
Press the MENU button on the  
remote to show the onscreen menu.  
SmartLock REVIEW  
BRIGHTNESS  
CABLE  
30  
AUTO PROGRAM  
CHANNEL EDIT  
EXTERNAL  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the onscreen menu until the word  
SETUP is highlighted.  
POWER  
Press the CURSOR RIGHT ᮣ  
button to display the SETUP menu  
features.  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
Press CURSOR UP or  
DOWN buttons to scroll the  
Setup features until the words AUTO  
PROGRAM are highlighted.  
7
4
1
2
AUTO PROG  
33  
A/CH  
S
S  
MENU  
EXIT  
Press the CURSOR RIGHT ᮣ  
button to start the Auto Program  
scanning of channels.  
3
Auto Program will scan for  
all available channels within  
the Antenna/Cable signal.  
When finished, the TV will  
go back to the SETUP menu.  
5
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
SMART HELP  
Try it out. Press the CHAN-  
NEL (+), (–) buttons and see  
which channels have been added to  
the TV’s memory.  
If you want to delete any unwanted  
channels from the TV’s memory, see the  
CHANNEL EDIT section on page 13.  
The onscreen menu will time out and  
disappear from the screen when you  
finish, or you can press the STA-  
TUS/EXIT button to clear the menu  
from the screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ADD AND DELETE CHANNELS  
hannel Edit makes it easy for you  
Cto ADD or DELETE channels  
from the list of channels stored in the  
TVs memory.  
BEGIN  
Press the MENU button on the  
remote to show the onscreen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the onscreen menu until the word  
SETUP is highlighted.  
CLOCK  
CC  
OFF  
SETUP  
TUNER  
CABLE  
SmartLock REVIEW  
BRIGHTNESS  
AUTO PROGRAM  
CHANNEL EDIT  
EXTERNAL  
30  
Press the CURSOR RIGHT ᮣ  
button to display the SETUP menu  
features.  
Press the CURSOR UP or  
DOWN buttons to scroll the  
Setup features until the words  
POWER  
CC  
CLOCK  
SLE
CHANNEL EDIT are highlighted.  
6
7
CHANNEL  
2
1
4
2
5
8
0
3
6
9
Press the CURSOR RIGHT ᮣ  
button to display the CHANNEL  
EDIT options.  
SAVED  
YES  
CHANNEL ADDED  
7
1
A/CH  
S
With the CHANNEL EDIT  
options displayed, and the word  
CHANNEL highlighted; enter the  
channel number (with the NUM-  
BERED or the CURSOR ᮣ  
RIGHT or LEFT buttons) you  
wish to ADD to, or DELETE from  
the TV’s memory.  
S  
MENU  
EXIT  
CHANNEL  
SAVED  
2
NO  
3
CHANNEL DELETED  
5
7
VOL  
CH  
MUTE  
ART  
SMART  
2
4
SOUND PICTURE  
Scroll down (using the CUR-  
SOR UP or DOWN buttons)  
to highlight the word SAVED.  
Now use the CURSOR RIGHT ᮣ  
button to toggle between YES or  
NO.  
If YES is selected the menu reads  
“CHANNEL ADDED” and the  
channel is added to the TV’s memo-  
ry. If NO is selected the menu reads  
“CHANNEL DELETED” and the  
channel is deleted from the TV’s  
memory.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE EXTERNAL CONTROL  
he External feature allows you to  
Trename your input source selec-  
tions. When the Input feature (refer to  
Owners Manual for details) is  
accessed to change audio/video jacks,  
your source selection will be called by  
the name you choose. This name will  
also appear onscreen when using the  
audio/video inputs.  
CLOCK  
BEGIN  
CC  
OFF  
SETUP  
Press the MENU button on the  
remote to show the onscreen menu.  
AUTO PROGRAM  
CHANNEL EDIT  
EXTERNAL  
SmartLock REVIEW  
BRIGHTNESS  
30  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the onscreen menu until the word  
SETUP is highlighted.  
POWER  
Press the CURSOR RIGHT ᮣ  
button to display the SETUP menu  
features.  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
Press the CURSOR UP or  
DOWN buttons to scroll the  
Setup features until the word  
EXTERNAL is highlighted.  
EXT 1  
EXT  
7
4
1
2
A/CH  
SU
MENU  
XIT  
EXT 1  
EXT 1  
EXT 1  
EXT 1  
EXT 1  
EXT 1  
GAM  
DVD  
VCD  
VCR  
LD  
Press the CURSOR RIGHT ᮣ  
button to activate the External fea-  
ture.  
6
5
3
VOL  
CH  
With the External options menu  
displayed, press the CURSOR  
RIGHT button to select a name  
from the list: EXT, GAM, DVD,  
VCD, VCR, LD, or SAT.  
MUTE  
SMART  
SMART  
SOUND PICTURE  
SAT  
SMART HELP  
Remember: This feature will  
rename your external signal  
source and appear onscreen with the  
new name but does not limit you to  
the type of accessory device that you  
may use.  
The onscreen menu will time out and  
disappear from the screen when you  
finish, or you can press the STA-  
TUS/EXIT button to clear the menu  
from the screen.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO ADJUST THE TV PICTURE  
o adjust your TV picture con-  
Ttrols, select a channel and follow  
BEGIN  
the steps shown below:  
Press the MENU button on the  
remote to display the onscreen menu.  
Press the CURSOR UP or  
DOWN buttons until the  
word BRIGHTNESS is highlighted.  
(Or, COLOR, PICTURE, SHARP-  
NESS, TINT, COL. TEMP depend-  
ing on the adjustment you want to  
make.)  
SETUP  
SmartLock REVIEW  
BRIGHTNESS  
COLOR  
30  
30  
30  
SmartLock REVIEW  
BRIGHTNESS  
COLOR  
30  
30  
30  
30  
PICTURE  
PICTURE  
Press the CURSOR RIGHT ᮣ  
or the CURSOR LEFT buttons  
to increase or decrease the brightness  
of the picture.  
SHARPNESS  
BRIGHTNESS  
COLOR  
30  
POWER  
30  
30  
30  
0
PICTURE  
SHARPNESS  
TINT  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
SMART HELP  
BRIGHTNESS Press the ᮣ  
or buttons until darkest parts of  
the picture are as bright as you prefer.  
7
COLOR  
30  
30  
30  
0
1
2
A/CH  
S
PICTURE  
SHARPNESS  
TINT  
S  
MENU  
COLOR Press the or buttons to  
add or eliminate color.  
EXIT  
PICTURE Press the or buttons  
until lightest parts of the picture show  
good detail.  
COL TEMP  
NORMAL  
3
VOL  
CH  
SHARPNESS Press the or buttons  
MUTE  
PICTURE  
SHARPNESS  
TINT  
30  
to improve detail in the picture.  
SMART  
SMART  
30  
0
TINT Press the or buttons to  
obtain natural skin tones.  
SOUND PICTURE  
COLOR TEMP Press the or but-  
tons to select NORMAL, COOL, or  
WARM picture preferences. (NORMAL  
will keep the whites, white; COOL will  
make the whites, bluish; and WARM will  
make the whites, reddish.)  
COL TEMP  
NORMAL  
OFF  
CONTRAST PLUS  
SHARPNESS  
TINT  
30  
The onscreen menu will time out and dis-  
appear from the screen when you finish, or  
you can press the STATUS/EXIT button to  
clear the menu from the screen.  
0
NORMAL  
OFF  
COL TEMP  
CONTRAST PLUS  
NOISE REDUCTION  
OFF  
COL TEMP  
COL TEMP  
WARM  
COOL  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE CONTRAST PLUS (BLACK STRETCH) CONTROL  
he Contrast Plus (Black Stretch)  
Tfeature helps to “sharpen” the  
picture quality. The black portions of  
the picture become richer in dark-  
ness and the whites become brighter.  
BEGIN  
Press the MENU button on the  
remote to display the onscreen menu.  
Press the CURSOR UP  
or  
TINT  
0
NORMAL  
OFF  
CURSOR DOWN buttons until  
the words CONTRAST PLUS are  
highlighted.  
COL. TEMP  
CONTRAST PLUS  
TINT  
0
NORMAL  
ON  
COL. TEMP  
CONTRAST PLUS  
NOISE REDUCTION  
VOLUME  
ON  
15  
Press the CURSOR RIGHT ᮣ  
or CURSOR LEFT buttons to  
activate or deactivate the Contrast  
Plus feature.  
NOISE REDUCTION  
VOLUME  
ON  
15  
POWER  
CC  
CLOCK  
SLEEP  
SMART HELP  
Remember: The onscreen  
menu will disappear in a few  
seconds after you have finished your  
adjustment.  
1
4
2
5
8
0
3
6
9
7
1
2
A/CH  
S
S  
MENU  
EXIT  
3
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE NOISE REDUCTION (PICTURE) CONTROL  
or reasons such as poor cable  
Freception, the picture can some-  
times appear slightly “speckled” (or  
signal noise shown in the picture). The  
NOISE REDUCTION control can help  
eliminate this type of interference and  
improve the quality of the picture.  
BEGIN  
Press the MENU button on the  
remote to display the onscreen menu.  
COL TEMP  
NORMAL  
ON  
CONTRAST PLUS  
Press the CURSOR UP or  
CURSOR DOWN button until  
the words NOISE REDUCTION are  
highlighted.  
NOISE REDUCTION  
VOLUME  
OFF  
15  
COL TEMP  
NORMAL  
ON  
CONTRAST PLUS  
AVL  
OFF  
NOISE REDUCTION  
VOLUME  
ON  
15  
Press the CURSOR RIGHT ᮣ  
or CURSOR LEFT buttons to  
activate or deactivate the Noise  
Reduction Feature.  
AVL  
OFF  
POWER  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
SMART HELP  
7
Remember: The onscreen  
menu will disappear in a few  
seconds after you have finished your  
adjustment.  
1
2
A/CH  
S
US  
MENU  
EXIT  
“Noise” Reduction is a video adjust-  
ment feature that affects the picture  
quality of the TV not the sound.  
3
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE TV’S CLOCK  
our television comes with an  
Yonscreen clock. During normal  
operation the clock appears on the  
screen when the STATUS/EXIT but-  
ton is pressed or when channel  
changes occur.  
BEGIN  
Press the CLOCK button on  
the remote to display the onscreen  
CLOCK menu.  
SET CLOCK  
TIMER ACTIVE  
CHANNEL  
- - :- - AM  
ON  
Press the CURSOR UP OR  
CURSOR DOWN buttons until  
the words SET CLOCK are high-  
lighted.  
12  
SET CLOCK  
TIMER ACTIVE  
CHANNEL  
10:00 AM  
ON  
12  
Enter the current time using  
the NUMBERED buttons. If the  
first number is a single digit first  
enter a zero then the digit (i.e.,  
press “0”, then press “8”).  
POWE
1
CC  
CLOCK  
EP  
Press the CURSOR RIGHT ᮣ  
or CURSOR LEFT buttons to  
set either AM or PM time.  
3
1
4
2
5
8
0
3
6
9
Note: The CLOCK onscreen menu  
can also be accessed through the  
main menu by pressing the MENU  
button; then scrolling up/down  
with the CURSOR UP or  
CURSOR DOWN buttons until  
the word CLOCK is highlighted.  
Press the CURSOR RIGHT ᮣ  
button to activate the CLOCK  
menu and follow the steps above to  
set the time.  
7
2
A/CH  
S
Note: If a power failure occurs, the  
TV's CLOCK will have to be reset.  
US  
EXIT  
MENU  
If no time is set, the time will not  
appear onscreen.  
4
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
SMART HELP  
Remember: Be sure to  
press “0” first and then the  
hour number for single digit  
entries.  
To clear the onscreen menu press  
the STATUS/EXIT button or wait a  
few seconds after you have fin-  
ished your adjustment and the  
menu will automatically disappear  
from the screen.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE TV’S ON TIMER CONTROL  
ust like an alarm clock you can  
Jset the TV to turn itself on at the  
BEGIN  
same time everyday.  
Press the CLOCK button to  
display the Clock onscreen menu.  
Press the CURSOR UP or  
CURSOR DOWN button until  
the words TIMER ACTIVE are  
highlighted.  
SET CLOCK  
TIMER ACTIVE  
CHANNEL  
10:00 AM  
OFF  
Press the CURSOR RIGHT  
or CURSOR LEFT button  
to select ON (if activating) or OFF  
(if deactivating) the Timer control.  
12  
SET CLOCK  
TIMER ACTIVE  
CHANNEL  
10:00 AM  
ON  
START TIME  
- - : - - AM  
12  
START TIME  
- - : - - AM  
POWER  
SLEEP  
1
CLOCK  
SMART HELP  
1
4
2
5
8
0
3
6
9
Remember: Be sure to set  
the clock to the current time,  
then set the time you want the tele-  
vision to turn on using the START  
TIME control as described on page  
21.  
7
2
A/CH  
S
S  
EXIT  
MENU  
The onscreen menu will time out  
and disappear from the screen  
when you finish, or you can press  
the STATUS/EXIT button to clear  
the menu from the screen.  
3
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACTIVATING THE START UP CHANNEL  
sed along with the Clock fea-  
Utures, you can select a specific  
channel that the television will tune  
to when the Timer Active control is  
turned ON.  
BEGIN  
Press the CLOCK button to  
display the Clock onscreen menu.  
Press the CURSOR UP or  
CURSOR DOWN button until  
the word CHANNEL is highlighted.  
SET CLOCK  
TIMER ACTIVE  
CHANNEL  
10:00 AM  
ON  
12  
START TIME  
- - : - - AM  
Press the number buttons to  
enter the start up channel you  
would like the television to start on.  
POWER  
SLEEP  
1
CLOCK  
SMART HELP  
1
4
2
5
8
0
3
3
Remember: Be sure to set  
the Timer Active control to  
ON.  
7
9
A/CH  
SURF  
STATUS  
The onscreen menu will time out  
and disappear from the screen when  
you finish, or you can press the  
STATUS/EXIT button to clear the  
menu from the screen.  
MENU  
EXIT  
2
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE TV’S START UP TIME  
sed along with the Clock fea-  
Uture, you can select a specific  
time the television will turn on  
when the Timer Active control is  
turned ON.  
BEGIN  
Press the CLOCK button to  
display the Clock onscreen menu.  
TIMER ACTIVE  
CHANNEL  
ON  
12  
Press the CURSOR UP or  
CURSOR DOWN button until  
the words START TIME are high-  
lighted.  
TIMER ACTIVE  
CHANNEL  
ON  
12  
START TIME  
- - : - - AM  
START TIME  
08:30 AM  
Enter the time to turn on the  
TV using the NUMBERED but-  
tons. If the first number is a single  
digit first enter a zero then the digit  
(i.e., press “0”, then press “8”).  
POWER  
1
CC  
CLOCK  
12  
Press the CURSOR RIGHT ᮣ  
or CURSOR LEFT buttons to  
set either AM or PM time.  
1
4
2
5
8
0
3
6
9
8:30  
3
7
2
A/CH  
S
S  
EXIT  
MENU  
SMART HELP  
4
Remember: Be sure to set  
the Timer Active to ON.  
VOL  
CH  
MUTE  
The onscreen menu will time out  
and disappear from the screen when  
you finish, or you can press the  
STATUS/EXIT button to clear the  
menu from the screen.  
SMART  
SMART  
CHANGING  
SOUND PICTURE  
TO CHANNEL 6  
IN 30 SECONDS  
If the TV is in use when the START TIME control is about  
to be activated, the screen will display a warning stating it's  
going to change channels in 30 seconds. It will appear like  
the screen shown below and change to the selected start up  
channel. Pressing any button on the remote within this  
count down will cancel the change.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE CLOSED CAPTION CONTROL  
losed Captioning (CC) allows  
Cyou to read the voice content of  
television programs on the TV  
screen. Designed to help the hear-  
ing impaired, this feature uses  
onscreen “text boxes” to show dia-  
logue and conversations while the  
TV program is in progress.  
NOTE: Not all TV programs and product commercials are made for broadcast  
with Closed Caption (CC) information included. Neither are all Closed Caption  
modes (CC-1, or CC-2) necessarily being used by a broadcast station during the  
transmission of a closed caption program. Refer to your area's TV program listings  
for the stations and times of Closed Caption shows.  
BEGIN  
Press the MENU button on the  
remote to display the onscreen  
menu.  
SmartLock  
CLOCK  
CC  
OFF  
SmartLock  
CLOCK  
1
Press the CURSOR UP or  
CURSOR DOWN button until  
the word CC (Closed Caption) is  
highlighted.  
SETUP  
SmartLock REVIEW  
CC  
SETUP  
SmartLock REVIEW  
Press the CURSOR RIGHT  
button to select the CLOSED  
CAPTION option you want (OFF, 1,  
2, or MUTE). Dialogue (and  
descriptions) for the action on the  
captioned TV program will appear  
onscreen.  
POWER  
CLOCK  
2
4
CC  
CC  
CLOCK  
SLEEP  
SETUP  
SmartLock REVIEW  
1
4
2
5
8
0
3
6
9
CLOCK  
7
CC  
MUTE  
NOTE: You can also set the  
Closed Caption by pressing the CC  
button on the remote. When pressed  
repeatedly the screen will display the  
options: CC-OFF, CC-1, CC-2, or  
CC-MUTE.  
1
2
A/CH  
S
SETUP  
S  
SmartLock REVIEW  
MENU  
EXIT  
4
3
CC-1  
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
SMART HELP  
Remember: The onscreen  
menu will time out and disap-  
pear from the screen when you fin-  
ish, or you can press the  
STATUS/EXIT button to clear the  
menu from the screen.  
CAPTION mode  
Example Display  
NOTE: The CC-MUTE option  
can be used to set the TV to  
turn the Closed Caption mode  
“ON” whenever the MUTE but-  
ton on the remote is pressed.  
This activates the CC-1 option.  
MUTE will appear smaller in  
the upper center of the screen.  
JOHN: Why did they move the  
meeting up to this week?  
MARSHA: I don't know, but they  
are pushing to close the deal.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SLEEP TIMER CONTROL  
ave you ever fallen asleep in  
Hfront of the TV only to have it  
wake you up at two in the morning  
with a test pattern screeching in  
your ears? Well, your TV can save  
you all that trouble by automatical-  
ly turning itself off.  
12  
15 MIN  
BEGIN  
12  
12  
12  
Press the SLEEP button on the  
remote control and the SLEEP timer  
onscreen display will appear in the  
lower center of the display.  
30 MIN  
45 MIN  
60 MIN  
Press the SLEEP button  
repeatedly to pick the amount of  
time (in 15 minute increments up to  
60 minutes; then 30 minute incre-  
ments up to 120 minutes; then 60  
minute increments up to 240 min-  
utes) before the TV will turn itself  
off.  
POWER  
1
CC  
CLOCK  
SLEEP  
12  
12  
12  
90 MIN  
120 MIN  
180 MIN  
1
4
2
5
8
0
3
6
9
7
An onscreen count down will appear  
during the last minute before the TV  
shuts itself off.  
A/CH  
SURF  
STATUS  
MENU  
EXIT  
12  
240 MIN  
VOL  
CH  
SMART HELP  
MUTE  
SMART  
SMART  
Remember: The SLEEP-  
TIMER control can also be set  
within the TV’s main menu.  
SOUND PICTURE  
The onscreen menu will time out  
and disappear from the screen when  
you finish, or you can press the  
STATUS/EXIT button to clear the  
menu from the screen.  
12  
12  
50 SEC  
10 SEC  
During the last minute of a SLEEP  
timer setting, an onscreen count  
down will be displayed. Pressing  
any button during the last minute  
will cancel the SLEEP timer.  
During the last 10 seconds of a  
SLEEP timer setting, an onscreen  
display will read GOOD BYE.  
GOODBYE  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL  
he SmartLock feature is an inte-  
Tgrated circuit that receives and  
processes data sent by broadcast-  
ers, or other program providers,  
that contain program content advi-  
sories. When programmed by the  
viewer, a TV with SmartLock can  
respond to the content advisories  
and block program content that may  
be found objectionable (such as  
offensive language, violence, sexual  
situations, etc.). This is a great fea-  
ture to censor the type of viewing  
children may watch.  
G
OFF  
OFF  
OFF  
ON  
TV-Y  
OFF  
PG  
TV-Y7  
TV-G  
PG-1 3  
R
OFF  
TV-PG  
TV-1 4  
TV-MA  
NC-1 7  
X
ON  
ON  
Over the next few pages you’ll  
learn how to block channels and  
certain rated programming. Below  
is a brief explanation of some terms  
and ratings you will find in the  
SmartLock feature.  
MOVIE RATINGS  
TV PARENTAL GUIDELINES  
(MOTION PICTURE ASSOCIATION OF AMERICA)  
(TV BROADCASTERS)  
G: General Audience - All ages admit-  
ted. Most parents would find this pro-  
gram suitable for all ages. This type of  
programming contains little or no vio-  
lence, no strong language, and little or no  
sexual dialogue or situations.  
TV-Y - (All children -- This program  
TV  
is designed to be appropriate for all  
Y children.) Designed for a very young  
audience, including children ages 2-6. This  
type of programming is not expected to  
frighten younger children.  
SmartLock offers various  
BLOCKING OPTION controls  
from which to choose:  
PG: Parental Guidance Suggested - This  
programming contains material that parents  
may find unsuitable for younger children.)  
It may contain one or more of the follow-  
ing: Moderate violence, some sexual situa-  
tions, infrequent coarse language, or some  
suggestive dialogue.  
TV-Y7 - (Directed to Older  
TV  
Children -- This program is designed  
Y7
for children age 7 and above.) It may  
MASTER DISABLE: This is what  
might be called the "master switch"  
for SmartLock. When in the ON  
position, ALL blocking/censoring is  
turned off (or disabled). When in the  
OFF position, ALL blocking based  
on specifically blocked settings will  
take place.  
be more appropriate for children who have  
acquired the development skills needed to  
distinguish between make-believe and reali-  
ty. This programming may include mild fan-  
tasy and comic violence (FV).  
PG-13: Parents Strongly Cautioned - This  
programming contains material that parents  
may find unsuitable for children under the  
age of 13. It contains one or more of the  
following: violence, sexual situations,  
coarse language, or suggestive dialogue.  
TV-G - (General Audience -- Most  
TV  
parents would find this program suit-  
Gable for all ages.) This type of pro-  
BLOCK UNRATED: ALL unrated  
programs based on the Movie  
Ratings or Parental (TV) Guidelines  
can be blocked if this feature is set  
to ON and the MASTER DISABLE  
feature is set to OFF.  
gramming contains little or no violence, no  
strong language, and little or no sexual dia-  
logue or situations.  
R: Restricted -This is programming is  
specifically designed for adults. Anyone  
under the age of 17 should only view this  
programming with an accompanying parent  
or adult guardian. It contains one or more  
of the following: intense violence, intense  
sexual situations, strong coarse language,  
or intensely suggestive dialogue.  
TV-PG - (Parental Guidance  
TV  
Suggested -- This program contains  
material that parents may find unsuit-  
PG  
BLOCK NO RATINGS: ALL pro-  
gramming with NO content advisory  
data can be blocked if this feature is  
set to ON and the MASTER DIS-  
ABLE feature is set to OFF.  
able for younger children.) This type of pro-  
gramming contains one or more of the fol-  
lowing: Moderate violence (V), some sexual  
situations (S), infrequent coarse language  
(L), or some suggestive dialogue (D).  
NC-17: No one under the age of 17 will  
be admitted. - This type of programming  
should be viewed by adults only. It con-  
tains graphic violence, explicit sex, or  
crude indecent language.  
After an access code has been pro-  
grammed, you can block up to 5  
individual channels. But more than  
just blocking channels, certain  
blocking options exist which will  
block programming based on ratings  
patterned by the Motion Pictures  
Association of America and TV  
broadcasters. (See description of rat-  
ings on this page.)  
TV-14 - (Parents Strongly  
TV  
Cautioned -- This program contains  
14
some material that many parents  
would find unsuitable for children under 14  
years of age.) This type of programming  
contains one or more of the following:  
intense violence (V), intense sexual situa-  
tions (S), strong coarse language (L), or  
intensely suggestive dialogue (D).  
X: Adults Only - This type of programming  
contains one or more of the following: very  
graphic violence, very graphic and explicit  
or indecent sexual acts, very coarse and  
intensely suggestive language.  
TV-MA - (Mature Audience Only --  
TV  
This program is specifically designed  
to be viewed by adults and therefore  
MA  
may be unsuitable for children under 17.)  
This type of programming contains one or  
more of the following: graphic violence (V),  
explicit sexual situations (S), or crude inde-  
cent language (L).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL (ACCESS CODE)  
ver the next few pages you’ll  
Olearn how to block channels  
and get a better understanding of  
the rating terms for certain pro-  
gramming.  
INPUT  
OFF  
First, lets start by learning how to  
set a personal access code:  
SLEEPTIMER  
SmartLock  
CLOCK  
SmartLock  
BEGIN  
Press the MENU button on the  
remote to display the onscreen  
menu.  
CC  
OFF  
ACCESS CODE  
_ _ _ _  
Press the CURSOR UP or  
CURSOR DOWN buttons until  
the words SmartLock are highlight-  
ed.  
POWER  
SLEEP  
CC  
CLOCK  
7
SmartLock  
4
Press the CURSOR RIGHT  
button to display the  
SmartLock Access Code screen.  
4
2
5
8
0
3
6
9
ACCESS CODE  
X X X X  
Using the NUMBERED but-  
tons, enter 0, 7, 1, 1. “XXXX”  
appears on the Access Code screen  
as you press the numbered buttons.  
2
8
A/C
SURF  
STATUS  
1
MENU  
EXIT  
“INCORRECT CODE” will  
appear on the screen, and you will  
need to enter 0, 7, 1, 1 again.  
3
SmartLock  
6
VOL  
CH  
Press the CURSOR DOWN ▼  
button until the words CHANGE  
CODE are highlighted.  
MUTE  
5
SMART  
SMART  
ACCESS CODE  
_ _ _ _  
SOUND PICTURE  
Press the CURSOR RIGHT ᮣ  
button to change your personal  
Access Code.  
INCORRECT CODE  
“Next enter a “new” 4 digit  
code using the NUMBERED but-  
tons. The screen will then ask you  
to confirm the code you just  
entered. Enter your new code  
again. “XXXX” will appear when  
you enter your new code.  
BLOCK  
CHANGE CODE  
CHANGE CODE X X X X  
Press the STATUS/EXIT but-  
ton to save the new code in the  
TV's memory.  
NOTE: The 0,7,1,1 access code shown  
on this page is the default code or a  
way to reset the code when the current  
access code is not known.  
CONFIRM CODE X X X X  
Parents - it isn’t possible for your child  
to unblock a channel without knowing  
your access code or changing it to a new  
one. If your code changes, and you did-  
n’t change it, then you know it’s been  
altered by someone else and blocked  
channels have been viewed.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL (BLOCK CHANNEL)  
fter your personal access code  
Ahas been set (see previous  
page), you are now ready to select  
the channels you want to block out  
or censor.  
INPUT  
OFF  
BEGIN  
SLEEPTIMER  
SmartLock  
CLOCK  
SmartLock  
Press the MENU button on the  
remote to show the onscreen menu.  
CC  
OFF  
Press the CURSOR UP or  
CURSOR DOWN button until  
the words SmartLock are highlight-  
ed.  
ACCESS CODE  
_
_
_
_
POWER  
SLEEP  
SmartLock  
Press the CURSOR RIGHT  
button to display the  
SmartLock Access screen.  
CC  
CLOCK  
7
4
1
4
2
5
8
0
3
6
9
ACCESS CODE  
X X X X  
Enter the correct access code  
number. “XXXX” shows on the  
Access Code display as you press  
the NUMBERED buttons.  
7
1
2
A/CH  
SU
S  
MENU  
EXIT  
Press the CURSOR UP or  
DOWN buttons until the word  
BLOCK is highlighted. Press the  
CURSOR RIGHT button then  
highlight CHANNELS  
BLOCK  
CHANGE CODE  
4
VO
CH  
6
5
MUTE  
8
SMART  
SMART  
BLOCKED.  
BLOCKING OPTIONS  
SOUND PICTURE  
Press the CURSOR RIGHT ᮣ  
button. Three options will be dis-  
played; CHANNEL, LOCK or  
CLEAR ALL.  
CHANNELS BLOCKED ᮣ  
MOVIE RATINGS  
PARENTAL GUIDELINE ᮣ  
With CHANNEL highlighted,  
use the NUMBERED buttons to  
enter the channel number you wish  
to block.  
CHANNEL 5 BLOCKED  
BY CHANNEL BLOCKING  
ENTER CODE TO VIEW  
CHANNEL  
LOCK  
5
YES  
Use the CURSOR DOWN ▼  
button to highlight the word  
LOCK, then press the CURSOR  
RIGHT button to select YES  
(block) or NO (do not block). The  
channel chosen is now blocked from  
viewing.  
CHANNEL  
LOCK  
5
_
_
_
_
NO  
CLEAR ALL  
CLEAR ALL  
When a blocked channel is viewed, this is what the screen will display. To view the blocked channel, sim-  
ply enter the current access code. Note: Once the access code is entered ALL blocked channels will be  
viewable until the TV is powered off. Once the set is turned off and then back on the previously blocked  
channels will again be blocked.  
Repeat steps 7 and 8 for any other  
channels you wish to block from  
viewing.  
To clear blocked channels  
follow the steps below:  
Press the CURSOR DOWN ▼  
button until the words CLEAR  
ALL are highlighted, then press the  
CURSOR RIGHT button.  
Note: When the CLEAR  
ALL option is selected, the  
CHANNEL option will dis-  
play ALL.  
If at this point if you change  
the LOCK option to YES,  
ALL channels will be blocked  
from viewing.  
CHANNEL  
LOCK  
ALL  
NO  
CHANNEL  
LOCK  
5
YES  
The screen will read “ALL  
ALL UNLOCKED  
CLEAR ALL  
UNBLOCKED” for a moment. At  
this point ALL the previously  
blocked channels will be unblocked.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL (BLOCKING OPTIONS)  
martLock offers the viewer other  
Sblocking features as well. With  
these Blocking Option features, the  
censoring can be turned ON or  
OFF.  
INPUT  
OFF  
SLEEPTIMER  
SmartLock  
CLOCK  
BEGIN  
SmartLock  
Press the MENU button on the  
remote to display the onscreen  
menu.  
CC  
OFF  
ACCESS CODE  
_
_
_
_
Press the CURSOR UP or  
CURSOR DOWN buttons until  
the words SMART LOCK are  
highlighted.  
POWER  
SLE
CC  
CLOCK  
4
2
SmartLock  
1
4
2
5
8
0
3
6
9
Press the CURSOR RIGHT  
button to display the SmartLock  
Access Code screen.  
ACCESS CODE  
X X X X  
7
6
3
1
A/CH  
SU
MENU  
EXIT  
Using the NUMBERED but-  
tons on the remote, enter your per-  
sonal Access Code.  
5
7
VOL  
CH  
With the word BLOCK high-  
lighted, Press the CURSOR  
RIGHT button.  
MUTE  
SMART  
SMART  
BLOCK  
CHANGE CODE  
SOUND PICTURE  
Scroll the menu using the  
CURSOR UP or CURSOR  
DOWN buttons until the words  
BLOCKING OPTIONS are high-  
lighted.  
OR  
MASTER DISABLE  
BLOCK UNRATED  
ON  
ON  
MASTER DISABLE OFF  
BLOCKING OPTIONS  
BLOCK UNRATED  
OFF  
Press the CURSOR RIGHT ᮣ  
button to display the Blocking  
Options (MASTER DISABLE,  
BLOCK UNRATED, or BLOCK  
NO RATING). When highlighted,  
each feature can be turned ON or  
OFF using the CURSOR RIGHT  
or CURSOR LEFT buttons  
on the remote.  
CHANNELS BLOCKED ᮣ  
MOVIE RATINGS  
BLOCK NO RATING ON  
BLOCK NO RATING OFF  
CHANNEL 2 0 BLOCKED  
BY CONTENT ADVISORY  
CANNOT DECODE RATING  
ENTER CODE TO VIEW  
If the BLOCK UNRATED or BLOCK NO RATINGS  
controls are turned ON, all unrated programs and pro-  
grams containing NO content advisory data will display  
the screen shown to the left. To watch the channel enter  
your access code, or change the BLOCK UNRATED  
and BLOCK NO RATINGS back to off.  
BLOCKING OPTIONS:  
MASTER DISABLE: This is what might be called the “master switch” for SmartLock. When in the ON position, ALL block-  
ing/censoring is turned off (or disabled). When in the OFF position, ALL blocking based on specifically blocked settings will  
take place.  
BLOCK UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this  
feature is set to ON and the MASTER DISABLE feature is set to OFF.  
BLOCK NO RATINGS: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the  
MASTER DISABLE feature is set to OFF.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL (MOVIE RATINGS)  
SMART  
HELP  
here are two types of program  
Tratings within the SmartLock  
feature. One is based on the Movie  
Industry ratings while the other is  
based on the TV Industry ratings.  
Both can be used to block or censor  
programming that has been rated in  
either manner.  
Remember:  
Selecting to  
block any rating  
will cause all the  
higher ratings to  
also be blocked  
automatically.  
INPUT  
SLEEPTIMER  
SmartLock  
CLOCK  
OFF  
SmartLock  
Lets first look at the Movie Rating  
options of SmartLock:  
CC  
OFF  
ACCESS CODE  
_ _ _ _  
BEGIN  
Press the MENU button on the  
remote to display the onscreen  
menu.  
POWER  
SLE
SmartLock  
CC  
CLOCK  
4
2
Press the CURSOR UP or  
CURSOR DOWN buttons until  
the words SmartLock are highlight-  
ed.  
1
4
2
5
8
0
3
6
9
ACCESS CODE  
X X X X  
7
6
1
Press the CURSOR RIGHT  
button to display the SmartLock  
Access Code screen.  
A/CH  
SU
MENU  
XIT  
BLOCK  
CHANGE CODE  
Using the NUMBERED but-  
tons on the remote, enter your  
Personal Access Code.  
3
5
7
VOL  
CH  
MUTE  
SMART  
SMART  
With the word BLOCK high-  
lighted, Press the CURSOR  
RIGHT button.  
SOUND PICTURE  
BLOCKING OPTIONS  
CHANNELS BLOCKED  
MOVIE RATINGS  
Scroll the menu using the  
CURSOR UP or CURSOR  
DOWN buttons until the words  
MOVIE RATINGS are highlight-  
ed.  
PARENTAL GUIDELINE  
CHANNEL 5 BLOCKED  
BY CONTENT ADVISORY  
PG  
OFF  
Press the CURSOR RIGHT ᮣ  
button to display the MOVIE  
RATINGS (G, PG, PG-13, R,  
NC17, or X).  
PG-1 3  
R
OFF  
ON  
ON  
ON  
MOVIE RATING  
R
ENTER CODE TO VIEW  
_ _ _ _  
NC-1 7  
X
When highlighted, all these options  
can be turned ON (which will allow  
blocking) or OFF (which will allow  
viewing).  
NOTE: When a rating is turned ON, all  
higher ratings will automatically be turned  
ON. To turn them OFF, you will have to set  
each rating individually. (i.e., R blocked  
manually, NC-17 and X will be blocked  
automatically.)  
Screen will display a message when programming is  
blocked by the Movie Rating feature. To unblock, turn  
the Movie Rating OFF, or enter your personal access  
code. Entering the code will unblock ALL blocked  
Movie Ratings until the TV is turn off. Then the  
blocked ratings will be reset to ON.  
Use the CURSOR RIGHT or  
CURSOR LEFT buttons on the  
remote to turn the rating option ON  
or OFF.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK CONTROL (PARENTAL GUIDELINE)  
SMART  
HELP  
his portion of the SmartLock  
Tfeatures cover program ratings  
based on the TV Industry rating  
system. This is known as Parental  
Guideline within SmartLock.  
Remember:  
Selecting to  
block any rating  
will cause all the  
higher ratings to  
also be blocked  
automatically.  
After selecting the SmartLock fea-  
ture and entering your personal  
access code, the BLOCK/CHANGE  
CODE screen appears;  
BLOCK  
CHANNELS BLOCKED  
MOVIE RATINGS  
CHANGE CODE  
PARENTAL GUIDELINE  
BEGIN  
With the word BLOCK high-  
lighted, Press the CURSOR  
RIGHT button.  
POWER  
SLEEP  
CC  
CLOCK  
TV-Y7  
TV-G  
Scroll the menu using the  
CURSOR UP or CURSOR  
DOWN buttons until the words  
PARENTAL GUIDELINES are  
highlighted.  
OFF  
1
4
2
5
8
0
3
6
9
TV-PG  
TV-1 4  
TV-MA  
7
2
4
A/CH  
S
Press the CURSOR RIGHT ᮣ  
button to display the Parental  
(TV) Guidelines (TV-Y, TV-Y7,  
TV-G, TV-PG, TV-14, or TV-MA).  
S  
3
MENU  
EXIT  
1
TV RATING SUB MENUS:  
When highlighted, the TV-Y and  
TV-G can be turned ON (which will  
allow blocking), or OFF (which  
will allow viewing) of these rated  
programs.  
VOL  
CH  
MUTE  
SMART  
SMART  
TV-Y  
OFF  
Y7  
ON  
ON  
TV-Y7  
TV-G  
SOUND PICTURE  
FV  
OFF  
The ratings of TV-Y7, TV-PG,  
TV-14, TV-MA can be cus-  
TV-PG  
tomized to block V (violence), FV  
(fantasy violence), S (sexual situa-  
tions), L (coarse language), or D  
(suggestive dialogue).  
TV-Y7  
TV-G  
PG  
D
ON  
ON  
ON  
ON  
ON  
Use the CURSOR RIGHT or  
CURSOR LEFT buttons on the  
remote to turn the rating option ON  
or OFF.  
OFF  
TV-PG  
TV-1 4  
TV-MA  
L
S
V
TV-Y - (All children -- This program is designed to be appropriate for all children.)  
Designed for a very young audience, including children ages 2-6. This type of pro-  
gramming is not expected to frighten younger children.  
1 4  
D
L
ON  
ON  
ON  
ON  
ON  
TV-G  
OFF  
TV-PG  
TV-1 4  
TV-MA  
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7  
and above.) It may be more appropriate for children who have acquired the develop-  
ment skills needed to distinguish between make-believe and reality. This program-  
ming may include mild fantasy and comic violence (FV).  
S
V
TV-G - (General Audience -- Most parents would find this program suitable for all  
ages.) This type of programming contains little or no violence, no strong language,  
and little or no sexual dialogue or situations.  
TV-PG - (Parental Guidance Suggested -- This program contains material that par-  
ents may find unsuitable for younger children.) This type of programming contains  
one or more of the following: some suggestive dialogue (D), infrequent coarse lan-  
guage (L), some sexual situations (S), or moderate violence (V).  
TV-PG  
TV-1 4  
TV-MA  
MA  
L
ON  
ON  
ON  
ON  
TV-14 - (Parents Strongly Cautioned -- This program contains some material that  
many parents would find unsuitable for children under 14 years of age.) This type of  
programming contains one or more of the following: intensely suggestive dialogue  
(D), strong coarse language (L), intense sexual situations (S), or intense violence (V).  
S
TV-MA - (Mature Audience Only -- This program is specifically designed to be  
viewed by adults and therefore may be unsuitable for children under 17.) This type of  
programming contains one or more of the following: crude indecent language (L),  
explicit sexual situations (S), or graphic violence (V).  
V
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDERSTANDING THE SMARTLOCK™ CONTROL (REVIEW SCREEN)  
ow that you’ve learned how to  
Nblock channels or censor your  
viewing, using the Movie Ratings  
or Parental (TV) Guidelines, lets  
review what you’ve done. The  
SmartLock Review feature allows  
you to see what has been blocked.  
Whenever the Menu button is  
pressed the onscreen menu will be  
displayed with the SmartLock  
Review highlighted.  
CC  
OFF  
CHANNELS BLOCKED  
-- -- -- -- --  
SETUP  
SmartLock REVIEW  
BRIGHTNESS  
COLOR  
MOVIE RATINGS  
-- -- -- -- --  
30  
30  
PARENTAL GUIDELINE  
-- -- -- -- --  
BEGIN  
BLOCK UNRATED  
OFF  
Press the MENU button on the  
remote to show the onscreen menu.  
SmartLock REVIEW will be high-  
lighted.  
BLOCK NO RATING OFF  
POWER  
CC  
CLOCK  
SLEEP  
Press the CURSOR RIGHT  
button and the SmartLock  
Review Menu will appear.  
1
4
2
5
8
0
3
6
9
SmartLock DISABLED  
7
This menu will display what chan-  
nels have been blocked; what  
1
A/CH  
SURF  
STATUS  
Movie Ratings have been blocked;  
what Parental (TV Ratings)  
MENU  
EXIT  
2
Guideline have been blocked. This  
review screen will also display the  
status of Unrated and No Rating  
settings. If the Master Disable fea-  
ture has been turned ON, the  
SmartLock DISABLED will appear in the  
SmartLock Review screen if the SmartLock  
Disable feature is set to ON.  
VOL  
CH  
MUTE  
SMART  
SMART  
SmartLock Review screen will dis-  
play “SmartLock DISABLED”.  
SOUND PICTURE  
CHANNELS BLOCKED - Shows all blocked channels that where set with-  
in the CHANNELS BLOCKED feature. Up to 5 channels may be blocked at  
one time.  
MOVIE RATINGS - Shows all blocked Movie Ratings that were set within  
the MOVIE RATINGS feature. All or some may be blocked at one time.  
Note: If a lower rating is blocked, this will automatically cause the higher  
ratings to be blocked also. (i.e., if R is set to be blocked, X will automatical-  
ly be blocked also.)  
CHANNELS BLOCKED  
5 1 0 1 2 3 2 4 5  
MOVIE RATINGS  
PARENTAL GUIDELINE - Shows all blocked TV Ratings that were set  
within the PARENTAL GUIDELINES feature. All or some may be blocked  
at one time. Note: If a lower rating is blocked; this will automatically cause  
the higher ratings to be blocked also. (i.e., if TV-14 is set to be blocked, TV-  
MA will automatically be blocked.) Parental Guidelines also have sub ratings  
for Violence (V), Fantasy Violence (FV), Sexual Situations (S), Coarse  
Language (L), and Suggestive Language (D). If the main rating is turned off  
but the sub rating is turned ON, the program will be blocked but the rating  
will not appear within the SmartLock Review menu.  
-- -- -- R X  
PARENTAL GUIDELINE  
-- -- -- 1 4 MA  
BLOCK UNRATED - Shows ON or OFF depending on the status of the  
BLOCK UNRATED feature. Based on the Movie Ratings or Parental (TV)  
Guidelines.  
BLOCK UNRATED  
ON  
BLOCK NO RATING - Shows ON or OFF depending on the status of the  
BLOCK NO RATING feature. Based on programming with NO content  
advisory data.  
BLOCK NO RATING ON  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING THE BASS AND TREBLE BOOST CONTROLS  
esides the normal volume level  
Bcontrol, your TV also has Bass  
and Treble Boost sound adjustment  
controls. The TREBLE Boost effects  
only the high frequency sound com-  
ing from the TV enhancing the  
highs; while the BASS Boost effects  
only the low frequency sound com-  
ing from the TV enhancing the lows.  
NOISE REDUCTION  
VOLUME  
ON  
1 5  
NOISE REDUCTION  
VOLUME  
ON  
1 5  
TREBLE BOOST  
BASS BOOST  
OFF  
ON  
TREBLE BOOST  
BASS BOOST  
ON  
ON  
SOUND  
STEREO  
SOUND  
STEREO  
BEGIN  
Press the MENU button on the  
remote to show the onscreen  
menu.  
POWER  
OR  
CC  
CLOCK  
SLEEP  
Press the CURSOR UP or  
CURSOR DOWN buttons to  
select and highlight the name of the  
control you wish to change (TRE-  
BLE BOOST, or BASS BOOST).  
1
4
2
5
8
0
3
6
9
VOLUME  
1 5  
ON  
TREBLE BOOST  
BASS BOOST  
SOUND  
7
OFF  
1
2
A/CH  
SU
STEREO  
ON  
S  
MENU  
EXIT  
SAP  
Use the CURSOR LEFT or  
RIGHT buttons to turn the  
selected control ON or OFF.  
3
VOL  
CH  
MUTE  
VOLUME  
1 5  
ON  
SMART  
SMART  
TREBLE BOOST  
BASS BOOST  
SOUND  
SOUND PICTURE  
ON  
STEREO  
ON  
SAP  
USING THE TV VOLUME BAR CONTROL  
se the Volume Bar control to see  
Uthe TVs volume level settings  
on the TV screen. The Volume Bar  
will be seen each time the VOLUME  
buttons (on the TV or remote) are  
pressed.  
CONTRAST PLUS  
NOISE REDUCTION  
VOLUME  
ON  
ON  
1 5  
OR  
TREBLE BOOST  
BASS BOOST  
ON  
ON  
VOLUME  
1 5  
BEGIN  
Press the MENU button to dis-  
play the onscreen menu.  
POWER  
POWER  
SLEEP  
Press the CURSOR UP or  
CURSOR DOWN buttons until  
the word VOLUME is highlighted.  
CC  
CLOCK  
SLEEP  
CC  
CLOCK  
1
4
2
5
8
0
3
6
9
1
4
2
5
8
0
3
6
9
Note: Pressing the VOL  
Press the CURSOR RIGHT ᮣ  
button to increase the TV’s volume  
or the CURSOR LEFT button to  
decrease the sound.  
7
7
(+) or (–) buttons will  
also allow you to adjust  
the sound level of the  
TV. A Volume Bar  
1
2
A/CH  
SU
A/CH  
SURF  
S  
STATUS  
MENU  
EXIT  
MENU  
EXIT  
adjustment will appear  
onscreen. Press the (+)  
to increase the volume  
and the (–) button to  
decrease the volume.  
1
3
VOL  
CH  
VOL  
CH  
MUTE  
MUTE  
SMART  
SMART  
SMART  
SMART  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE INPUT CONTROL (A/V INPUTS)  
AUDIO/VIDEO INPUTS  
The TVs Audio/Video Input jacks  
are for direct picture and sound  
connections between the TV and  
a VCR (or similar device) that  
has Audio/Video Output jacks.  
1
BEGIN  
75  
V
ID  
E
O
IN  
A
U
D
IO  
VIDEO  
AUDIO  
Connect the VIDEO (yellow)  
CABLE to the VIDEO IN jack  
on the back of the TV. Then con-  
nect the AUDIO (red and white)  
CABLES to the AUDIO (left and  
right) IN jacks on the rear of the  
TV.  
IN  
75  
VIDEO IN  
(YELLOW)  
BACK OF TV  
AUDIO IN  
(RED or WHITE)  
2
Connect the VIDEO (yellow)  
CABLE to the VIDEO OUT jack  
on the back of the VCR. Then  
connect the AUDIO (red and  
white) CABLES to the AUDIO  
(left and right) OUT jacks on the  
rear of the VCR.  
ANTENNA  
IN  
OUT  
AUDIO  
IN  
OUT  
VIDEO  
IN  
VCR  
(EQUIPPED WITH  
VIDEO AND AUDIO  
OUTPUT JACKS)  
ANTENNA  
OUT  
BACK OF VCR  
3
Turn the VCR and the TV  
ON.  
TREBLE BOOST  
BASS BOOST  
INPUT  
ON  
Press the MENU button on  
the remote to display the  
onscreen menu.  
ON  
SLEEPTIMER  
SmartLock  
OFF  
Press the CURSOR UP or  
CURSOR DOWN buttons  
until the word INPUT is high-  
lighted.  
ANTENNA  
EXT 1  
POWER  
SLEEP  
Press the CURSOR RIGHT  
or CURSOR LEFT button  
to display the picture/sound menu  
(ANTENNA, EXT 1). Use the  
CURSOR UP or DOWN ▼  
buttons to select.  
CC  
CLOCK  
1
4
2
5
8
0
3
6
9
7
4
5
A/CH  
SU
MENU  
IT  
6
Now your ready to place a prere-  
corded video tape in the VCR and  
press the PLAY button.  
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SMARTPICTURE™ CONTROL  
hether you’re watching a  
Wmovie or a video game, your  
TV has automatic video control set-  
tings matched for your current pro-  
gram source or content. The  
SmartPicture feature quickly resets  
your TVs video controls for a num-  
ber of different types of programs  
and viewing conditions you may  
have in your home. Each  
SmartPicture setting is preset at the  
factory to automatically adjust the  
TVs Brightness, Color, Picture,  
Sharpness, Tint, and Color  
PERSONAL  
Temperature levels.  
MOVIES  
BEGIN  
Press the SMART PICTURE  
button on the remote control. The  
current SmartPicture setting will  
appear in the middle of the screen.  
POWER  
SPORTS  
Press the SmartPicture button  
repeatedly to select either PER-  
SONAL, MOVIES, SPORTS, or  
WEAK SIGNAL picture settings.  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
Note: The PERSONAL control is  
set using the PICTURE options  
within the onscreen menu. This is  
the only SmartPicture control set-  
ting that can be changed. All other  
settings are setup at the factory dur-  
ing the time of production.  
7
A/CH  
SURF  
STATUS  
WEAK SIGNAL  
MENU  
EXIT  
VOL  
CH  
1
MUTE  
SMART  
SMART  
SOUND PICTURE  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE SMARTSOUND™ CONTROL  
he SmartSound feature allows  
Tthe listener to select between  
four different factory set sound  
options. Personal (which can be set  
by the user), Theater (for movie  
viewing), Music (for musical type  
programming) and Voice (when the  
program is mainly dialogue). To  
select any of the options follow the  
directions below.  
BEGIN  
PERSONAL  
Press the SMART SOUND but-  
ton on the remote control. The cur-  
rent SmartSound setting will appear  
in the middle of the screen.  
THEATER  
Press the SMART SOUND  
button repeatedly to toggle  
between the four settings.  
POWER  
MUSIC  
Remember, only the PERSONAL  
control can be changed by the view-  
er. This changes the settings in the  
main onscreen menu's sound con-  
trols.  
CC  
CLOCK  
SLEEP  
1
4
2
5
8
0
3
6
9
7
A/CH  
SURF  
STATUS  
VOICE  
MENU  
EXIT  
SMART HELP  
Remember, SmartSound  
works only with the pro-  
VOL  
CH  
grams coming through the 75Ω  
input on the rear of the TV (RF  
audio). It will not control the  
sound levels for the External con-  
nections.  
NOTE: When the VOICE mode of  
SmartSound is selected the AVL fea-  
ture will be automatically turned ON.  
1
MUTE  
SMART  
SMART  
SOUND PICTURE  
AVL CONTROL  
In most cases the volume levels com-  
ing from broadcast programming or  
commercials are never the same.  
With the AVL control turned ON,  
you can have the TV level out the  
sound being heard. This makes for a  
more consistent sound by reducing  
the peaks and valleys that occur dur-  
ing program changes or commercial  
breaks.  
TREBLE BOOST  
BASS BOOST  
AVL  
ON  
ON  
OFF  
TREBLE BOOST  
BASS BOOST  
AVL  
ON  
ON  
ON  
INPUT  
SLEEPTIMER  
OFF  
INPUT  
SLEEPTIMER  
OFF  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE TV’S SMARTSURF™ CONTROL  
“list” or series of previously  
Aviewed channels can be select-  
ed with the SURF button on your  
remote control. With this feature  
you can easily switch between dif-  
ferent TV programs that currently  
interest you. The SmartSurf control  
allows you set up to eight channels  
in its quick viewing “list”.  
5
5
ADDED  
BEGIN  
Press the CHANNEL (+) or (–)  
buttons (or the NUMBER buttons)  
to select a channel to add to the  
SURF list.  
8
Press the SURF button on the  
remote while the channel number is  
still displayed to ADD the channel to  
the SURF list.  
POWER  
8
ADDED  
CC  
CLOCK  
SLEEP  
1
1
4
2
5
8
0
3
6
9
Repeat steps 1 through 2 to add  
additional channels (up to 8) to the  
SURF list.  
2
7
A/CH  
SURF  
STATUS  
MENU  
EXIT  
To remove a channel for the SURF  
list, simply choose the channel with  
the numbered buttons and press the  
SURF button while the channel  
number is still displayed and the  
screen will read DELETED.  
10  
10  
ADDED  
VOL  
CH  
MUTE  
SMART  
SMART  
SOUND PICTURE  
A/CH BUTTON  
5
Your remote also has an A/CH  
(Alternate Channel) button.  
Pressing this button will toggle  
between the Current and one previ-  
ously selected channel.  
SURF  
8
SURF  
10  
SURF  
1
4
2
5
8
0
3
6
5
1
7
9
22  
Press the SURF button repeatedly to cycle or "loop"  
through the channels saved in the SURF channel list.  
A/CH  
SURF  
STATUS  
EXIT  
MENU  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIPS IF SOMETHING ISN'T WORKING  
lease make these simple  
Pchecks before calling for ser-  
vice. These tips can save you time  
and money since charges for TV  
installation and adjustment of  
customer controls are not cov-  
ered under your warranty.  
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or  
TV information channel) which shows a constant non-moving pattern on the TV screen,  
can cause picture tube damage. When your TV is continuously used with such a source  
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image  
permanently on the picture tube. When not in use, turn the video source OFF.  
Regularly alternate the use of such video sources with normal TV viewing.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again.  
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.  
No Power  
No Picture  
• Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug?  
• Check the TUNER control for CABLE or ANTENNA setting.  
• Check the VOLUME buttons.  
• Check the MUTE button on the remote control.  
No Sound  
• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries  
if necessary.  
• Clean the remote and the remote sensor window on the TV.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.  
• Check to be sure TV outlet is not on a wall switch.  
Remote Does Not  
Work  
• Repeat channel selection.  
• Add desired channel numbers (CHANNEL control) into TV memory.  
• Check to be sure the TUNER control is set to the CABLE option.  
TV Displays Wrong  
Channel or No  
Channels Above 13  
Cleaning and Care  
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.  
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using  
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when  
cleaning.  
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean  
dry cloth to dry the wiped surfaces.  
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring  
of the cabinet finish.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GLOSSARY TO TELEVISION TERMS  
Coaxial Cable • A single solid antenna wire normally matched with a Programming • The procedure of adding or deleting channel numbers  
metal plug (F-type) end connector that screws (or pushes) directly onto a into the Television’s memory circuits. In this way the Television  
75 Ohm input found on the Television or VCR.  
“remembers’’ only the locally available or desired channel numbers  
and skips over any unwanted channel numbers.  
Closed Caption • Broadcast standard which allows you to read the  
voice content of television programs on the TV screen. Designed to help  
Remote Sensor Window • A window or opening found on the  
the hearing impaired this feature uses onscreen "text boxes" to show dia- Television control panel through which infrared remote control com-  
logue and conversations while the TV program is in progress.  
mand signals are received.  
Direct Audio/Video Inputs • Located on the rear of the TV these con-  
nectors (RCA phono type plug) are used for the input of audio and  
video signals. Designed for use with VCRs (or other accessories) in  
order to receive higher picture resolution and offer sound connection  
options.  
Setup Mode • Automatic feature control settings made by the TV.  
Designed for first time setup and use. Settings for signal connections  
(antenna or cable TV), plus channel program memory are held in the  
TV's memory (even if the set is unplugged and moved to a new loca-  
tion.)  
Identify • Method by which a remote control searches and finds an  
operating code for another product (such as a VCR or Cable Converter).  
Once the code has been "identified" then the TV remote can operate and  
send commands to the other product.  
Second Audio Program (SAP) • Another or additional audio channel  
provided for in the Multichannel Television Sound (MTS) broadcast  
standard. The most frequently proposed use for SAP is the simultane-  
ous bilingual broadcast of TV program material.  
Onscreen Displays (OSD) • Refers to the wording or messages generat-  
ed by the television (or VCR) to help the user with specific feature con-  
trols (color adjustment, programming, etc.).  
Status • Allows the user to quickly confirm what channel number is  
currently being viewed. Status can also be used to clear the Television  
of onscreen displays or information (rather than waiting for the dis-  
plays to “time out” or automatically disappear from the screen).  
Menu • An onscreen listing of feature controls shown on the Television  
screen that are made available for user adjustments.  
Twin Lead Wire • The more commonly used name for the two strand  
300 Ohm antenna wire used with many indoor and outdoor antenna  
systems. In many cases this type of antenna wire requires an additional  
adapter (or balun) in order to connect to the 75 Ohm Input terminals  
designed into the more recent Televisions and VCRs.  
Multichannel Television Sound (MTS) • The broadcast standard that  
allows for stereo sound to be transmitted with the TV picture.  
INDEX  
Accessories/Optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7  
Adapter Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7  
Add/Delete Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Audio/Video Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Bass Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Cable TV Connections/Settings . . . . . . . . . . . . . . . . . . . . . . . . . .5, 11  
Channel Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13  
Clock Set Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Closed Captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Contrast Plus (Black Stretch) Control . . . . . . . . . . . . . . . . . . . . . . . .16  
Controls/TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Controls/Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 9  
External Control (Input Naming) . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Glossary TV Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Input Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Language Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Memory/Program Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13  
Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Minus(-)/Plus (+) Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Picture Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Precautions/Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 36, 40  
Programming Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9  
Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-40  
RF Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7  
Safety/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3, 36, 40  
Sensor Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Set Up/First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13  
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
SmartLock - Understanding the SmartLock Control . . . . . . . . . . . . .24  
SmartLock Access Code Feature . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
SmartLock Block Channel Feature . . . . . . . . . . . . . . . . . . . . . . . . . .26  
SmartLock Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
SmartLock Blocking using the Movie/TV Ratings . . . . . . . . . . . .28-29  
SmartLock Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
SmartPicture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
SmartSound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
SmartSurf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Start-up Channel Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Start-up Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Status Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Timer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Tips for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36, 38-40  
Treble Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
VCR/TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Volume Bar Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Philips Consumer Electronics Company  
Factory Service Center Locations  
Detroit/Toledo  
Cleveland/  
N Ohio •  
Chicago  
Columbus  
San Francisco/Metro Area  
Los Angeles  
Charlotte  
Pittsburgh/WV Area  
Knoxville/E Tennessee  
Philadelphia/S New Jersey  
Atlanta/N Georgia  
Dallas  
Wash/Balt  
Orlando  
Houston/Galveston  
Beaumont/Austin  
San Antonio  
Tampa/W Florida  
Ft. Myers/SW Florida  
Indicates In-Home Service Only  
1-800-242-9225  
Miami/SE Florida  
Indicates In-Home/Carry-In Service  
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to  
obtain efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge  
Service. For Out-of-Warranty service, call the location nearest you.  
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous),  
vous pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir un service après vente rapide et efficace. Si le  
produit est sous garantie, il suffira de présenter une preuve d`achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la  
garantie, contactez le centre le plus près de chez vous.  
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse  
con la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garan-  
tía, Ud. debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la  
garantía, llame al lugar más cercano de los abajo indicados.  
In Canada  
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product  
Please contact Philips at  
1-800-661-6162 (French speaking)  
1-800-363-7278 (English speaking)  
Au Canada  
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile  
Veuillez contacter philips á:  
1-800-661-6162 (Francophone)  
1-800-363-7278  
En el Canadá  
Cómo recibir servicio efficiente para su producto, en persona, por correo o a domicillo  
Favor de comunicarse con Philips al:  
1-800-661-6162 (francófono)  
1-800-363-7278 (anglófono)  
EL4482-3 Rev. AA  
3135 015 07541  
MAC2929 1/99  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER  
NEAR YOU. YOUR PRODUCT WILL RECEIVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,  
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPSFACTORY SERVICE. AND, IF THE PHONE NUMBER LISTED FOR YOUR AREA  
IS LONG DISTANCE, CALL 1-800-242-9225 FOR FACTORY SERVICE.  
COMMENT OBTENIR NOTRE SERVICE APRÈS VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, À DOMICILE, OU EN SE PRÉSENTANT À UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES  
DE RÉCEPTION DE PRODUITS À RÉPARER À TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR LEMPLACEMENT DE CES DÉPÔTS  
DANS UN RAYON DE 50 À 75 MILES (80 KM À 120 KM) DU CENTRE DE SERVICE LOCAL.  
MO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVÉS DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR  
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO  
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL.  
GEORGIA  
CENTRAL U.S.A.  
ILLINOIS  
Philips Factory Service of Georgia  
200 N. Cobb Pkwy., Suite 120  
Marietta, GA 30062  
Philips Factory Service Central US  
950 Keynote Circle  
Brooklyn Heights, OH 44131  
(216) 741-3334  
Philips Factory Service of Illinois  
1279 W. Hamilton Pkwy.  
Itasca, IL 60143  
(770) 795-0085  
(630) 775-0990  
FLORIDA  
MICHIGAN  
TENNESSEE  
Philips Factory Service of Florida  
1911 US Highway 301 North  
Tampa, FL 33619  
Philips Factory Service of Michigan  
25173 Dequindre  
Madison Heights, MI 48071  
(248) 544-2110  
Philips Factory Service of East Tennessee  
6700 D Papermill Rd.  
Knoxville, TN 37919  
(813) 621-8181  
(423) 584-6614  
WESTERN U.S.A.  
DALLAS AREA  
MID-ATLANTIC  
Philips Factory Service Western Region  
681 East Brokaw Rd.  
San Jose, CA 95112  
Philips Factory Service of Dallas  
415 N. Main Street, #107  
Euless, TX 76040  
Philips Factory Service Mid-Atlantic  
352 Dunks Ferry Rd.  
Bensalem, PA 19020  
(215) 638-7500  
(408) 436-8566  
(713) 682-3990  
TEXAS  
Philips Factory Service of Texas  
1110 N. Post Oak Rd., Suite 100  
Houston, TX 77055  
(713) 682-3990  
MAC2929 1/99  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED W ARRANTY  
CO LO R TELEVISIO N  
90 Days Free Labor  
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)  
This product must be carried in for repair.  
W HO IS CO VERED?  
MAKE SURE YO U KEEP...  
You must have proof of purchase to receive warranty service. A sales  
receipt or other document showing that you purchased the product is  
considered proof of purchase.  
Please keep your sales receipt or other document showing proof of  
purchase. Attach it to this owners manual and keep both nearby.  
Also keep the original box and packing material in case you need to  
return your product.  
W HAT IS CO VERED?  
BEFO RE REQ UESTING SERVICE...  
Please check your owners manual before requesting service.  
Adjustments of the controls discussed there may save you a service  
call.  
Warranty coverage begins the day you buy your product. For 90 days  
thereafter, all parts will be repaired or replaced free, and labor is free.  
From 90 days to one year from the day of purchase, all parts will be  
repaired or replaced free, but you pay for all labor charges. From one  
to two years from the day of purchase, you pay for the replacement or  
repair of all parts except the picture tube, and for all labor charges.  
After two years from the day of purchase, you pay for the replacement  
or repair of all parts, and for all labor charges.  
TO GET W ARRANTY SERVICE IN U.S.A.,  
PUERTO RICO O R U.S. VIRGIN ISLANDS...  
Contact a Philips factory service center (see enclosed list) or autho-  
rized service center to arrange repair.  
All parts, including repaired and replaced parts, are covered only for  
the original warranty period. When the warranty on the product  
expires, the warranty on all replaced and repaired parts also expires.  
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all implied warranties,  
including implied warranties of merchantability and fitness for a partic-  
ular purpose, are limited in duration to the duration of this express  
warranty. But, because some states do not allow limitations on how  
long an implied warranty may last, this limitation may not apply to  
you.)  
W HAT IS EXCLUDED?  
Your warranty does not cover:  
labor charges for installation or setup of the product, adjustment of  
customer controls on the product, and installation or repair of  
antenna systems outside of the product.  
TO GET W ARRANTY SERVICE IN CANADA...  
Please contact Philips at:  
product repair and/or part replacement because of misuse, acci-  
dent, unauthorized repair or other cause not within the control of  
Philips Consumer Electronics Company.  
1-800-661-6162 (French Speaking)  
1-800-363-7278 (English Speaking)  
reception problems caused by signal conditions or cable or antenna  
systems outside the unit.  
a product that requires modification or adaptation to enable it to  
operate in any country other than the country for which it was  
designed, manufactured, approved and/or authorized, or repair of  
products damaged by these modifications.  
(In Canada, this warranty is given in lieu of all other warranties. No  
other warranties are expressed or implied, including any implied war-  
ranties of merchantability or fitness for a particular purpose. Philips is  
not liable under any circumstances for any direct, indirect, special, inci-  
dental or consequential damages, howsoever incurred, even if notified  
of the possibility of such damages.)  
incidental or consequential damages resulting from the product.  
(Some states do not allow the exclusion of incidental or consequen-  
tial damages, so the above exclusion may not apply to you. This  
includes, but is not limited to, prerecorded material, whether copy-  
righted or not copyrighted.)  
REMEMBER...  
• a product used for commercial or institutional purposes.  
Please record the model and serial numbers found on the product  
below. Also, please fill out and mail your warranty registration card  
promptly. It will be easier for us to notify you if necessary.  
W HERE IS SERVICE AVAILABLE?  
Warranty service is available in all countries where the product is offi-  
cially distributed by Philips Consumer Electronics Company. In coun-  
tries where Philips Consumer Electronics Company does not distribute  
the product, the local Philips service organization will attempt to pro-  
vide service (although there may be a delay if the appropriate spare  
parts and technical manual(s) are not readily available).  
MODEL # ________________________________________________  
SERIAL # ________________________________________________  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
Philips Consum er Electronics Com pany, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800  
Printed in U.S.A.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Microphone PVM 48 User Manual
Pelco Security Camera C2403M C User Manual
Philips Air Cleaner AC4063 00 User Manual
Philips All in One Printer SFF 6135D User Manual
Philips Electric Toothbrush HX6910 User Manual
Philips Network Router CPWBS154 User Manual
Pioneer Portable Speaker SP SB03 User Manual
PMC Sierra Network Card PM5350 User Manual
Praktica Digital Camera D00478 User Manual
Pride Mobility Mobility Aid INFINFB2048 User Manual