I N S T A L L A T I O N
FT8304/FR8304
Fiber Transmitter
and Receiver
Four-Channel Digitally Encoded Video
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Models. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel - FT8304 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel - FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the Transmitter/Receiver into a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the Transmitter/Receiver to a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
List of Illustrations
1
Four-Channel Video FT8304 Transmitter and FR8304 Receiver . . . . . . . . . . . . . . . . . . . . 7
2
3
4
5
6
Front Panel of FT8304 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front Panel of FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel of FT8304 Transmitter and FR8304 Receiver . . . . . . . . . . . . . . . . . . . . . . . . 11
Mounting the FT8304 Transmitter/FR8304 Receiver Using the Wall Clip . . . . . . . . . . . 14
FT8304 Transmitter/FR8304 Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
List of Tables
A
Troubleshooting with Front-Panel Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
C1644M-B (6/06)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the points where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases shall be placed on the apparatus.
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
16. Installation should be done only by qualified personnel and conform to all local codes.
17. Use only installation methods and materials capable of supporting four times the maximum
specified load.
18. A CCC-approved power cord must be used to power this equipment when used in China.
19. CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so.
4
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
The product and/or manual may bear the following marks:
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Regulatory Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RADIO AND TELEVISION INTERFERENCE
This equipment has been tested and found to comply with the limits of a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Changes and Modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commission’s rules.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
6
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Overview
DESCRIPTION
The FT8304/FR8304 fiber transmitter and receiver provide the ability to transmit up to four composite
video channels over one optical fiber (refer to Figure 1).
FOUR
VIDEO
INPUTS
FOUR
VIDEO
OUTPUTS
FT8304
FR8304
TRANSMITTER
RECEIVER
ONE
FIBER
Figure 1. Four-Channel Video FT8304 Transmitter and FR8304 Receiver
Features of the FT8304/FR8304 fiber optic transmission system include the following:
•
8-bit digitally encoded video for high-quality multichannel video transmission over a single
fiber
•
•
•
•
•
•
Multimode fiber support for distances up to 2 km (1.2 mi)
Single-mode fiber support for distances up to 30 km (18.6 mi)
Exceeds all requirements for the RS-250C Medium-Haul Transmission specification
12 VDC or 24 VAC power supply
Compatible with NTSC, PAL, and SECAM video standards
Meets NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient
operating temperature, mechanical shock and vibration, humidity with condensation,
high-line/low-line voltage conditions, and transient voltage protection
NOTE: Conformal coating is required for operation in environments with relative humidity
above 95% (condensing).
•
•
•
No performance adjustments required
Stand-alone and rack-mountable modular design
LED indicators for monitoring of signal status, laser status, and operating power
The FT8304 transmitter/FR8304 receiver is a Class 1 laser product that complies with FDA radiation
performance standard 21CFR Subchapter J and with IEC 60825-1 Edition 1.2, 2001-08.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
7
MODELS
The FT8304/FR8304 fiber transmitter and receiver consist of the following series of models:
Multimode Models:*
FT8304MSTR
FR8304MSTR
Four-channel fiber optic video transmitter; multimode, ST connector
Four-channel fiber optic video receiver; multimode, ST connector
Single-Mode Models:*
FT8304SSTR
FR8304SSTR
FT8304SFCR
FR8304SFCR
Four-channel fiber optic video transmitter; single-mode, ST connector
Four-channel fiber optic video receiver; single-mode, ST connector
Four-channel fiber optic video transmitter; single-mode, FC connector
Four-channel fiber optic video receiver; single-mode, FC connector
*For conformal coated models, replace the first letter F in the model number with the letter C.
The conformal coated version of FT8304MSTR, for example, is CT8304MSTR.
OPTIONAL ACCESSORIES
The following optional accessories are available:
WM5001-3U
Wall mount base kit for single-width module
WM5001-3UEXP Wall mount expansion kit for single-width module
RK5000-3U
19-inch rack mount chassis for 14 slots (no power), 3 RUs
19-inch rack mount chassis for 12 slots with power, 3 RUs
External rack power supply, 1 RU, dual 120 W power outputs
Blank filler panel, single width
RK5000PS-3U
EPS5000-120
RK5001B-3U
RK5002B-3U
RK5001-1UEXP
Blank filler panel, double width
Adapter kit that allows a 3 RU single-width fiber module to be used in
RK5000PS-5U rack mount chassis
8
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
FRONT PANEL
The front panel of the FT8304 transmitter and the FR8304 receiver provides LED indicators that allow
you to monitor signal status, laser status (transmitter only), and operating power. The following
sections provide a view of the front panel of the FT8304 transmitter and the FR8304 receiver.
FRONT PANEL - FT8304 TRANSMITTER
Figure 2 illustrates the front panel of the FT8304 transmitter.
4
3
ᕡ
2
1
ᕢ
ᕣ
FT8304
TRANSMITTER
Figure 2. Front Panel of FT8304 Transmitter
ᕡ
ᕢ
ᕣ
VIDEO PRESENT LEDs 1-4
OPTIC FAULT LED, laser status indicator
POWER LED (Pelco badge)
For detailed information about the front-panel indicators, refer to the Troubleshooting section.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
FRONT PANEL - FR8304 RECEIVER
Figure 3 illustrates the front panel of the FR8304 receiver.
ᕡ
ᕢ
ᕣ
FR8304
RECEIVER
Figure 3. Front Panel of FR8304 Receiver
ᕡ
ᕢ
ᕣ
VIDEO PRESENT LEDs 1-4
OPTIC FAULT LED, optical signal status indicator
POWER LED (Pelco badge)
For detailed information about the front-panel indicators, refer to the Troubleshooting section.
10
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL
All connections to the FT8304 transmitter and the FR8304 receiver are made to the rear panel of the
modules (refer to Figure 4).
ᕡ
ᕢ
ᕡ
ᕢ
ᕣ
ᕣ
ᕤ
ᕥ
FT8304
TRANSMITTER
FR8304
RECEIVER
Figure 4. Rear Panel of FT8304 Transmitter and FR8304 Receiver
ᕡ
ᕢ
RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack-
mounted module
STAND-ALONE POWER CONNECTOR, 2-pin connector for power connection of stand-alone
module; removable mating connector with screw terminals (not shown)
ᕣ
ᕤ
ᕥ
FIBER OPTIC CONNECTOR, ST or FC (dependent on FT8304/FR8304 model)
VIDEO IN CONNECTORS 1-4, 75-ohm BNC analog video input (transmitter only)
VIDEO OUT CONNECTORS 1-4, 75-ohm BNC analog video output (receiver only)
For additional information about rear-panel connections, refer to the Installation section.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Installation
PACKAGE CONTENTS
The following items are supplied:
1
1
FT8304 transmitter or FR8304 receiver
Regulated switching power supply with four plug adapters (North American, Australian, U.K.,
and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output
1
1
Wall clip with two 4-40 x 0.250-inch Phillips pan head screws with lock washers
(for attachment of single module to wall)
FT8304/FR8304 Fiber Transmitter and Receiver Installation manual (this manual)
MOUNTING
The FT8304 transmitter/FR8304 receiver can be mounted into a rack or can be used as a stand-alone
module. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.
MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK
The FT8304 transmitter/FR8304 receiver can be installed into an RK5000 Series rack mount chassis,
which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack. The RK5000
Series rack mount chassis includes the following models:
•
RK5000PS-3U and RK5000-3U: Designed to accommodate fiber optic modules as follows:
–
The RK5000PS-3U rack mount chassis provides 12 single-width module slots and a
power supply.
–
The RK5000-3U rack mount chassis provides 14 single-width module slots (a power
supply is not included). Power to the modules can be supplied using the optional
external power supply (EPS5000-120).
For additional information, refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis
Installation manual.
•
RK5000PS-5U: Designed to accommodate Endura™ modules but can also accommodate fiber
optic modules with the use of the appropriate adapter kit. The RK5001-1UEXP adapter kit is
required for installation of the FT8304 transmitter/FR8304 receiver into the RK5000PS-5U
chassis.
For information about the RK5000PS-5U chassis, refer to the RK5000PS-5U Rack Mount Chassis
Installation manual.
12
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING THE TRANSMITTER/RECEIVER TO A WALL
The FT8304 transmitter/FR8304 receiver can be mounted to a wall in the following ways:
•
Using the supplied wall clip for attachment of a single module to a wall. For installation
instructions, refer to the Mounting the Transmitter/Receiver Using the Wall Clip section.
•
Using the optional WM5001 wall mount kits, which are designed for mounting of single-width
fiber optic modules. The WM5001-3U base kit allows mounting of a single module to a wall.
The WM5001-3UEXP expansion kit allows mounting of an additional module. It is
recommended that a maximum of three expansion kits be used with the base kit, allowing a
maximum of four single-width modules to be attached to a wall.
NOTE: The WM5001 wall mount kits can be used with the WM5002 wall mount kits, which
are designed for mounting of double-width fiber optic modules. If mounting a mix of single-
width and double-width modules is desired, it is recommended that a maximum of two single-
width modules and one double-width module be mounted in combination with one another.
Kit Installation manual.
Mounting the Transmitter/Receiver Using the Wall Clip
NOTE: Before mounting the FT8304 transmitter/FR8304 receiver to a wall, ensure that there is
adequate space at both ends for viewing the front-panel LEDs and for making the various rear-panel
cable connections.
To attach the FT8304 transmitter/FR8304 receiver to a wall using the supplied wall clip, refer to
Figure 5 and do the following:
1. Using the two vertical or horizontal wall-mounting holes, attach the wall clip to a wall using
two screws (not provided).
2. Slide the module into the clip until the two holes on the bottom of the module align with the
two holes on the lower flange of the clip.
3. Attach the module to the clip using the two Phillips pan head screws provided for the clip.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
13
UPPER
FLANGE
VERTICAL
MOUNTING HOLE (2)
HORIZONTAL
MOUNTING HOLE (2)
TRANSMITTER/
RECEIVER
LOWER
FLANGE
SCREW, PHILLIPS
PAN HEAD WITH
LOCK WASHER (2)
WALL CLIP
Figure 5. Mounting the FT8304 Transmitter/FR8304 Receiver Using the Wall Clip
14
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Connections to the FT8304 transmitter and the FR8304 receiver are made on the rear panel of the
modules and consist of the following:
•
Power connection
NOTES:
–
–
A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when
used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power
Class 2 and rated as 24 VAC, 300 mA (minimum output).
In extreme temperature conditions, it is recommended that an industrial-rated outdoor
power supply such as the Pelco WCS1-4 power supply be used.
•
•
•
Fiber connection
Video input connections (transmitter only)
Video output connections (receiver only)
Figure 6 provides an illustration of FT8304 transmitter/FR8304 receiver connections.
POWER/ALARM CONNECTION
FOR RACK-MOUNTED MODULE
POWER CONNECTION
FOR STAND-ALONE MODULE
FIBER OPTIC CABLE
COAXIAL CABLE
COAXIAL CABLE
COAXIAL CABLE
COAXIAL CABLE
Figure 6. FT8304 Transmitter/FR8304 Receiver Connections
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Troubleshooting
LED indicators on the front panel of the FT8304 transmitter/FR8304 receiver (refer to Figure 2 and to
Figure 3, respectively) allow you to monitor signal status, laser status (transmitter only), and
operating power. Table A provides information about the front-panel indicators and associated
troubleshooting guidelines.
Table A. Troubleshooting with Front-Panel Indicators
Indicator Color
Meaning
Possible Cause
Corrective Action
Power LED (Pelco badge)
Blue Pelco logo
lights.
Power is being
applied to the
module.
–
No action required.
Blue Pelco logo
does not light.
Power is not being
applied to the
module.
Power connection is faulty. Check power connection.
If module is rack mounted,
reseat module or power
supply as necessary.
Power supply has failed.
Replace power supply.
Loss of power occurs due to Check circuit breakers, fuses,
tripped circuit breakers,
blown fuses, or faulty
electrical service.
or electrical service as
necessary.
Video Present LED
Green
Incoming video
signal is present on
the channel.
—
No action required.
Red on transmitter Incoming video
Video source is not
Check power connection to
the video source.
signal is not present powered on.
on the channel.
Video source is not
connected to the
transmitter.
Check BNC connections.
Coaxial cable is defective. Replace cable.
(Continued on next page)
16
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A. Troubleshooting with Front-Panel Indicators (Continued)
Meaning Possible Cause Corrective Action
Video Present LED (Continued)
Incoming video Optical signal is not being Refer to the Optic Fault LED -
Indicator Color
Red on receiver
signal is not present received from the trans-
Receiver section in this
on the channel.
mitter. Optic Fault LED is
also red.
table.
Video source is not
powered on.
Check power connection to
the video source.
Video source is not
connected to the
transmitter.
Check BNC connections.
Coaxial cable connected to Replace cable.
the transmitter is defective.
Optic Fault LED - Transmitter
Green
Laser is operating
properly.
–
Flashing red
Laser has shut down. Transmitter is operating in Ensure that transmitter oper-
extreme environmental
conditions; for example,
operating temperature is
below or above recom-
ates according to operating
conditions stated in the
Specifications section, and
then cycle the power.
mended range as stated in If problem persists, contact
the Specifications section. Product Support.
Laser has reached end of
life.
Cycle the power. If problem
persists, contact Product
Support.
(Continued on next page)
C1644M-B (6/06)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A. Troubleshooting with Front-Panel Indicators (Continued)
Indicator Color
Meaning
Possible Cause
Corrective Action
Optic Fault LED - Receiver
Green
The optical signal is
being received from
the transmitter.
—
No action required.
Red
The optical signal is Transmitter is not powered Check power connections.
not being received
from the transmitter.
on.
Replace power supply if
necessary.
Fiber optic cable is not
connected.
Check fiber optic
connections.
Fiber optic cable connectors Clean, polish, or replace fiber
are dirty or are damaged.
necessary.
Fiber optic cable is
defective.
Replace cable.
Optical dB losses in the
fiber optic installation
exceed the optical power
Check for problems with
the fiber optic installation,
budget specification stated losses in connectors, splices,
in the Specifications
section.
patch panels, cables,
and so on.
Optical dB losses in the
fiber optic installation meet
the optical power budget
specification stated in the
Specifications section;
however, the receiver may
be defective.
Contact Product Support.
18
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VIDEO
Number of Channels
Modulation Type
4
Pulse code modulation, 8-bit resolution
Video Input (FT8304)/
Video Output (FR8304)
1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Bandwidth
6.5 MHz
Gain
Unity
Crosstalk
-50 dB typical at 3.58 MHz
Differential Gain
Differential Phase
Tilt
<1%
<1.2°
<1%
Signal-to-Noise Ratio
>60 dB (CCIR weighted)
GENERAL
Operating Temperature
Input Power Requirements
LED Indicators
-40° to 167°F (-40° to 75°C)
12 VDC or 24 VAC, 280 mA
Video Present (per channel)
Optic Fault
Power
Dimensions
Unit Weight
8.75” D x 1.08” W x 4.81” H
(22.23 x 2.74 x 12.22 cm)
1.46 lb (0.66 kg)
MECHANICAL
Connectors
Video
BNC (per channel)
Rack Power/Alarm
Stand-Alone Power
Fiber Optic
4-pin connector
2-pin connector, screw terminal
ST for multimode fiber
ST or FC for single-mode fiber
C1644M-B (6/06)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTICAL POWER BUDGET, TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT
Model No.
Optical
Power
Budget
Maximum
Transmission
Distance
Laser
Class 1
Limit*
Compatible
Receiver
Transmitter
Wavelength
Multimode (62.5/125 µm)
FT8304MSTR
FR8304MSTR
1310 nm
20 dB†
2 km (1.2 mi)‡ <15.6 mW
Single-Mode (9/125 µm)
FT8304SSTR
FT8304SFCR
FR8304SSTR
FR8304SFCR
1310 nm
1310 nm
20 dB
20 dB
30 km (18.6 mi)§ <15.6 mW
30 km (18.6 mi)§ <15.6 mW
*The FT8304 transmitter and the FR8304 receiver are classified by the FDA as Class 1 laser products.
† When using 50/125 µm multimode fiber, subtract 3 dB from the optical power budget.
‡Maximum transmission distance is limited by fiber bandwidth.
§ Maximum transmission distance is based on attenuation of 0.5 dB/km plus a 5 dB buffer for connector
and splice losses.
NOTES:
•
For conformal coated models, replace the first letter F in the model number with the letter C.
The conformal coated version of FT8304MSTR, for example, is CT8304MSTR.
•
For models with higher optical power budgets, contact the factory.
20
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
This equipment contains electrical or electronic components that must be recycled properly to
comply with Directive 2002/96/EC of the European Union regarding the disposal of waste
electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling
this equipment.
C1644M-B (6/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT WARRANTY AND RETURN INFORMATION
WARRANTY
Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of
shipment.
Exceptions to this warranty are as noted below:
•
•
•
Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted pair transmission products.
Three years on Genex® Series products (multiplexers, server, and keyboard).
Three years on Camclosure® and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and
MC3651H-2X camera models, which have a five-year warranty.
•
•
•
•
•
•
Three years on PMCL200/300/400 Series LCD monitors.
Two years on standard motorized or fixed focal length lenses.
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed dome products.
Two years on Spectra®, Esprit®, ExSite™, and PS20 scanners, including when used in continuous motion applications.
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays. The lamp and color wheel will be covered for a period of
90 days. The air filter is not covered under warranty.
•
Eighteen months on DX Series digital video recorders, NVR300 Series network video recorders, and Endura™ Series distributed network-based video
products.
•
•
One year (except video heads) on video cassette recorders (VCRs). Video heads will be covered for a period of six months.
Six months on all pan and tilts, scanners or preset lenses used in continuous motion applications (that is, preset scan, tour and auto scan modes).
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco shipment. All goods requiring warranty repair shall be sent freight
prepaid to Pelco, Clovis, California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this
warranty.
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products. Pelco’s
liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party or product liability, relating to the Products
shall not exceed the price paid by the Dealer to Pelco for such Products. In no event will Pelco be liable for any special, incidental or consequential
damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Pelco or otherwise.
The above warranty provides the Dealer with specific legal rights. The Dealer may also have additional rights, which are subject to variation from state
to state.
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to obtain a Repair Authorization number (RA), and
provide the following information:
1. Model and serial number
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number
3. Details of the defect or problem
If there is a dispute regarding the warranty of a product which does not fall under the warranty conditions stated above, please include a written
explanation with the product when returned.
Method of return shipment shall be the same or equal to the method by which the item was received by Pelco.
RETURNS
In order to expedite parts returned to the factory for repair or credit, please call the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization
number (CA number if returned for credit, and RA number if returned for repair).
All merchandise returned for credit may be subject to a 20% restocking and refurbishing charge.
Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid. Ship to the appropriate
address below.
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:
Service Department
Pelco
3500 Pelco Way
Clovis, CA 93612-5699
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed to return goods to the USA, you may do one of the
following:
If the goods are to be sent by a COURIER SERVICE, send the goods to:
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:
Pelco
Pelco c/o Expeditors
473 Eccles Avenue
South San Francisco, CA 94080 USA
Phone: 650-737-1700
Fax: 650-737-0933
3500 Pelco Way
Clovis, CA 93612-5699 USA
REVISION HISTORY
Manual #
C1644M
Date
9/04
Comments
Original version.
C1644M-A
C1644M-B
11/04
6/06
Updated Specifications section and Figure 5.
Added conformal coating and Optic Fault LED laser status information (ECO 06-13948). Updated optional accessories,
mounting instructions, power supply recommendations, and specifications.
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.
Endura and ExSite are trademarks of Pelco.
DLP is a registered trademark of Texas Instruments, Inc.
©Copyright 2006, Pelco.
All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Worldwide Headquarters
3500 Pelco Way
Clovis, California 93612 USA
USA & Canada
Tel: 800/289-9100
Fax: 800/289-9150
International
Tel: 1-559/292-1981
Fax: 1-559/348-1120
ISO9001
United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East
|
|
|
|
|
|
|
|
Download from Www.Somanuals.com. All Manuals Search And Download.
|