PLATINUM® CONDENSING GAS-FIRED WATER HEATER
POLYSHIELD® POLYMER-LINED TANK
STANDARD FEATURES AND EQUIPMENT
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
POLYSHIELD® polymer-lined tank with 5-year warranty ꢀ
Five-year heat exchanger warranty ꢀ
One-year cost-free service policy ꢀ
Factory authorized startup
Up to 94% thermal efficiency
Electronic temperature control with LED readout; accurate to ± 1°F
Removable heat exchanger with non-ferrous waterside construction and solid copper fire tubes
100% submerged combustion
Heat exchanger ASME stamped for 160 psi operating pressure
Storage tank ASME stamped for 160 psi operating pressure and National Board of Pressure Vessels Registered
Nonferrous, removable fittings at all tank connections
Fan assisted, pre-mix, stainless steel burner
Two safety shut off valves (single body)
NOx emission levels compliant with SCAQMD
Air proving switch
Electronic combustion sequencer and safeguard with pre-purge
Operating thermostat
Redundant high limits with automatic reset
ASME-rated temperature and 150 psi pressure relief valve
Drain valve
Fiberglass insulated tank
Durable, corrosion-resistant, polyethylene jacket
Heavy-duty steel stand
Support stand is designed to allow tank to be rotated to horizontal position for heat exchanger removal
23"-diameter tank access after heat exchanger removal
ASHRAE 90.1 compliant for thermal efficiency and standby loss
UL listed for PVC venting material
UL listed for zero clearance from combustible walls (non-combustible floor only)
UL listed for NSF-5 compliance
FM compliant
OPTIONAL FEATURES AND EQUIPMENT
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Electronic low water cutoff
Manual-reset, immersion temperature limiting device
Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others)
Water pressure gauge
L.P. gas operation
Condensate neutralization system
CSD-1 and IRI compliant components (includes manual reset electronic low water cut off and manual reset
temperature limiting device)
AGA-rated temperature and pressure relief valve
Tridicator (field installed)
ꢁ
ꢁ
ꢁ
Lifting attachments
Other agency compliance _______________________ (consult factory)
ꢀSee complete warranty and/or service policy for details
PVI reserves the right to change
the design and specification
without notice.
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
PV6801 10/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|