DATA PROJECTOR
-
U5 732
User’s Manual
S O U R C E
A U T O
A N D B Y
S T
A N D B Y
S T
S T A T U S
4
M
O
Z O
3
I M
1 L
2
R
E
V O
T
E
C A N C E L
R - C L I C K
N
E
Z
E
E
R
F
R
Q
K
E
I
U
Q
O
U
R
E
S
O
E
U
L
E
V
B
R
Y
B
D
N
A
T
S
IMPORTANT
* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-
ments Incorporated (U.S.A.).
* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).
* S-VGA is a registered trademark of Video Electronics Standards Association.
* Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries).
* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).
Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies
and to the product trademarks.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
Important Safeguards
These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them
carefully and heed all warnings.
Installation
•
•
•
•
•
•
For best results, use the unit in a darkened room.
Place the unit on a flat, level surface in a dry area away from dust and moisture.
Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
Exposure to direct sunlight, smoke or steam can harm internal components.
Handle the unit carefully. Dropping or jarring can damage internal components.
Do not place heavy objects on top of the unit.
Power Supply
•
•
•
The unit is designed to operate on a power supply of 100 – 120/220 – 240 V 50/60 Hz AC. Ensure that your
power supply fits these requirements before attempting to use the unit.
Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or
fire.
Disconnect the power cable (mains lead) from the power outlet after using the unit.
Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or
in green).
Cleaning
•
•
Disconnect the power cable (mains lead) from the unit.
Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use
strong detergents or solvents such as alcohol or thinner.
•
•
Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated
dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice
tool, to prevent the damage to the unit.
Lamp Replacement
•
Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000
hours of usage, the lamp will turn off.
Fire and Shock Precautions
•
Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside
the unit. Allow at least 10 cm (3 inches) of space between the unit and walls.
•
Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve
any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If
something should fall into the unit, immediately disconnect the power cable from the unit and have the object
removed by a qualified PLUS service person.
•
Do not place any liquids on top of the unit.
Cautions on Handling the Storage Case
•
Do not put anything other than the unit or its accessories in the storage case.Paper clips, staples or other metal
or foreign objects getting inside could cause fire or electric shock.
Do not swing the storage case around when the unit is inside. Also do not force objects that are too large to fit
into the storage case. Doing so could scratch or damage the unit.
•
When Moving the Unit
•
When moving the unit to a different place, put it in the included storage case and place the storage case in an
insulating package to protect against falls and shocks.
If there are paper clips, staples or other metal or foreign objects inside the storage case, the objects could get
inside the unit while the unit is being moved, causing fire or electric shock when the power is turned on.
•
CAUTION – HOT!
The area around the exhaust vents is hot during and immediately after image projection.
To avoid burns, keep your hands away from this area.
Wait until the exhaust vents area cools off before touching it.
Do not look into the lens while the unit is on. Serious damage to your eyes could result.
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.
Major Features
Ⅵ Lightweight high-intensity projector
The synergy of the DLP™ (Digital Light Processing) display system and our own optical design serve to improve the optical
utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DMD (Digital
Micromirror Device of high precision). These factors have enabled a design that offers both high intensity and small size/
lightweight features.
Ⅵ Sharp, clear picture
The DLP™ display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting
the display of small characters and diagrams with distinct clarity.
Ⅵ Powerful functions for presentations
A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used
when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC
signal.
A presentation timer that supports presentations and a security lock function protecting against unauthorized projection have
also been added.
Ⅵ High contrast ratio of 2000:1
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio.
By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just
the brightness based on specifications.
Ⅵ Beautiful reproduction of high-quality images from DVD
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD
and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLP™
display system projector.
Ⅵ Econo-mode switch function for the lamp output
Using the lamp Econo-mode will extend the life of the lamp and lower the power consumption.
By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy
conservation and ecology.
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................................... E-2
Major Features ....................................................................................................................... E-4
Table of Contents ................................................................................................................... E-5
Checking the Supplied Accessories .................................................................................... E-7
Names of the Main Unit Parts ............................................................................................... E-9
Names of the Remote Control Parts/Preparing the Remote Control .............................. E-11
Names of Parts/Preparing the Remote Control Unit ................................................. E-11
Remote Control Range ............................................................................................. E-13
The Procedure Up to Projecting to the Screen ................................................................. E-14
Placement Guide .................................................................................................................. E-15
Screen Size and Projection Distance ........................................................................ E-15
Connecting Personal Computers and Video Equipment .................................................. E-18
Connections with Personal Computer ....................................................................... E-18
Connect the projector’s RGB connector using the included RGB signal cable. .. E-18
To Output the External Output Signal of a Notebook Computer ......................... E-19
Connections with Composite Signals ........................................................................ E-20
Video Equipment with VIDEO Connectors .......................................................... E-20
Video Equipment with S-VIDEO Connectors ...................................................... E-20
Connections with Component Signals....................................................................... E-21
When the Video Equipment Has a YCbCr Connector or YPbPr Connector ........ E-21
Connections with the AUDIO Jack ............................................................................ E-22
Power Cable Connections and Switching the Power On/Off ........................................... E-23
Operating................................................................................................................... E-23
Finishing .................................................................................................................... E-25
Adjustment of the Projection Screen ................................................................................. E-26
Adjustment of the Projection Screen ......................................................................... E-26
Making Adjustments with the Adjusters .............................................................. E-27
General Operation ................................................................................................................ E-28
Input Selection .......................................................................................................... E-28
Automatic Adjustment ............................................................................................... E-29
Freezing a Moving Picture ......................................................................................... E-30
Cancelling Video and Audio Temporarily ................................................................... E-30
Adjustment of the Volume.......................................................................................... E-31
Enlargement of the Image and Video Movement ...................................................... E-32
Using the Presentation Timer .................................................................................... E-33
Using the Laser Pointer ............................................................................................. E-34
Performing Mouse Operations on the Computer
with the Remote Control Unit .................................................................................... E-35
Controlling the Projector from a Computer ................................................................ E-36
Protecting the Projector with the Security Lock ......................................................... E-37
Using the Quick Menu ............................................................................................... E-39
Menu Operation Method ...................................................................................................... E-40
Performing Menu Operations .................................................................................... E-42
List of Item Names Offering Input Selection and Adjustments/Settings .................... E-45
Image ..................................................................................................................................... E-47
Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-47
Picture Adj. / Fine Picture / H Position / V Position .................................................... E-47
Reset ......................................................................................................................... E-48
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.
Table of Contents
Color...................................................................................................................................... E-49
Quick Color Adj. ........................................................................................................ E-49
Gamma ..................................................................................................................... E-49
Color Temp. ............................................................................................................... E-50
White ......................................................................................................................... E-50
Color Space .............................................................................................................. E-50
White Balance ........................................................................................................... E-51
View ....................................................................................................................................... E-52
Aspect ....................................................................................................................... E-52
Filter .......................................................................................................................... E-52
Vertical Flip / Horizontal Flip...................................................................................... E-53
Keystone.................................................................................................................... E-53
Keystone Save .......................................................................................................... E-53
Setup ..................................................................................................................................... E-54
Auto Source............................................................................................................... E-54
Auto Power Off .......................................................................................................... E-54
Menu Position ............................................................................................................ E-55
Lamp Mode ............................................................................................................... E-55
Input Format .............................................................................................................. E-56
Presentation Timer .................................................................................................... E-56
Option ................................................................................................................................... E-57
Language .................................................................................................................. E-57
On Screen ................................................................................................................. E-57
Background ............................................................................................................... E-57
Startup Screen .......................................................................................................... E-58
Security Lock ............................................................................................................. E-58
Info......................................................................................................................................... E-59
Status ........................................................................................................................ E-59
Factory Default .......................................................................................................... E-59
Lamp Timer Reset ..................................................................................................... E-59
Resolution / Frequency ............................................................................................. E-60
Lamp Timer ............................................................................................................... E-60
When an Indicator is Lit or Flashing .................................................................................. E-61
Troubleshooting ................................................................................................................... E-62
Cleaning ................................................................................................................................ E-63
Replacing the Lamp Cartridge ............................................................................................ E-64
Specifications ....................................................................................................................... E-67
Table of Supported Frequency ........................................................................................... E-68
Cabinet Dimensions ............................................................................................................ E-69
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
Wireless remote control unit with laser pointer [1] /
Size AAA batteries [2]
This controls the projector. (See Page E-11.)
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has an S-video connector.Connections are described on Page
E-20.
No. 777704000
4
Z O M
3
V
1
2
T I M E R
C A N C E L
R - C L I C K
M U T E
Z
E
R E
F
Q
E N T E R
Q U I C K
A U T O
L A S E R
V I D E O
M E N U
B
A N D B Y
S T
RGB signal cable
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]
This is used in making connections with a personal computer.
See Page E-18 about connections.
No. 777709000
Video cable (RCA pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has a video connector. Connections are described on Page E-
20.
No. 777703000
Audio cable (Mini plug, 2 m / 6.6 feet) [1]
This cable is used with equipment that has phono type audio
jacks. Connections are described on Page E-22.
No. 777705000
Audio conversion adapter (Mini-jack/ RCA pin plug, 15 cm
/ 0.5 feet) [1]
This cable is used with equipment whose audio connector is
of the phono pin type. Connections are described on Page E-
22.
No. 777706000
Power cable (1.8 m / 5.9 feet) [1]
This power cable supplies power to the unit. See Page E-23
about connections.
USB cable (type A, 2 m / 6.6 feet) [1]
Used to perform mouse operations on a computer using the
projector’s remote control unit. Connections are described on
Page E-35.
No. 777707000
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.
Checking the Supplied Accessories
Storage case (for projector and accessories) [1]
This case is designed to hold the projector itself and its acces-
sories.
HOW TO PUTTHE PROJECTOR INTO THE STORAGE CASE
Close the lens shutter or lens cap before putting the projec-
tor in its case, then fasten the projector in place with the
Velcro belt. Place the accessories in the storage pocket.
Use it when storing the projector.
Velcro strap
Pocket
E
C
R
U
O
S
O
T
U
A
Y
B
D
N
A
T
S
Y
B
D
N
A
T
S
A
T
Cable storage pouch [1]
User’s Manual (CD-ROM Edition) [1]
User’s Manual (Simplified Edition) [1]
“WARNING”
Handling the cables supplied with this product,
will expose you to lead, a chemical known to the
State of California to cause birth defects or other
reproductive harm.
Wash hands after handling.
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.
Names of the Main Unit Parts
S O U R C E
A U T O
A N D B Y
S T
A N D B Y
S T
S T A T U S
Zoom ring [E-26]
Focus ring [E-27]
Exhaust vents
Ventilation slots
Remote control
sensor [E-13]
Adjuster button [E-27]
(Also on opposite side)
Lens
Lens cap
Remove before use.Attach
the lens cap after use to
protect the lens.
Ventilation slots
Lamp cover [E-65]
Adjusters [E-27]
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.
Names of the Main Unit Parts
STATUS
STANDBY
STANDBY
AUTO
STATUS indicator [E-23, 61]
STANDBY indicator [E-23, 61]
STANDBY button [E-23]
AUTO button [E-28]
SOURCE
SOURCE button [E-28]
Remote control sensor [E-13]
STATUS
ST
ANDBY
ST
ANDBY
AUTO
SOURCE
RGB
S
VIDEO
VIDEO
AC IN connector [E-23]
AUDIO
MOUSE
PC CO
Speaker
Ventilation slots
Built-in security slot
(See description below.)
MOUSE connector [E-35]
AUDIO connector [E-22]
RGB
S VIDEO
VIDEO
PC CONTROL
AUDIO MOUSE
VIDEO connector [E-20]
S-VIDEO connector [E-20]
PC CONTROL connector
(D-Sub 9-pin) [E-36]
RGB connector [E-18, 21]
Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by
Kensington Microware Inc.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the Remote Control Parts/Preparing the Remote Control
Refer to the description (and diagram) for the remote control unit included with your projector.
Names of Parts/Preparing the Remote Control Unit
Names of the Remote Control Parts
Infrared transmitter [E-13]
Laser transmitter [E-34]
L-CLICK button [E-35]
LASER button [E-34]
(Turns the laser point on and off)
STANDBY button [E-23, 25]
This button is used to switch ON
the power aand set the unit to the
STANDBY mode.
STANDBY
LASER
AUTO button [E-28]
(Automatic adjustment of the RGB
moving image)
VIDEO
RGB
AUTO
Buttons used for input selection
[E-28]
RGB button and VIDEO button
(VIDEO / S-VIDEO)
MENU
QUICK
QUICK button [E-39]
(Displays a simplified menu)
Q
Buttons used for the PC mouse
function [E-35]
(JOG button and R-CLICK button)
Buttons used for menu operations
[E-40]
The
,
,
and
buttons are
R-CLICK/
CANCEL
ENTER
the select (̆, ̄, ̇ and ̈) buttons.
TIMER button [E-33]
(Presentation timer time setting
display)
TIMER
FREEZE MUTE
FREEZE button [E-30]
(Freezes moving pictures)
MUTE button [E-30]
(Temporarily cancels the video and
audio)
1
VOL
2
ZOOM
VOL button [E-31]
(Volume adjustment)
ZOOM button [E-32]
(Digital zoom adjustment)
3
4
Number buttons [E-37]
(Used for the security lock.)
Note:
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume
transferring signals, press the button again.
Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the Remote Control Parts/Preparing the Remote Control
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
Slide the battery compartment cover (located on the
1bottom of the remote control) and pull off.
Insert the batteries to match the "+" and "–" as indi-
2cated inside the compartment.
(A) Leaving a little space in the front, close the lid, (B)
3then with the back pressed tightly, (C) press the lid
towards the front.
(B)
(A)
(C)
* When replacing batteries, purchase two of the same type of AAA battery.
* DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of the Remote Control Parts/Preparing the Remote Control
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit
and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Side View
Remote control
infrared transmitter
5°
5°
20°
20°
Remote control
sensor
5m/16.4feet
Top View
30°
30°
Remote control
infrared transmitter
Remote control
sensor
5m/16.4feet
Precautions
Handling of the Remote Control
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the
obstruction of the signal by an obstacle located in the pathway may prevent operation.
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry
immediately.
* Try to avoid use in hot and/or humid locations.
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care
of a doctor.
* Remove the batteries from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote control and attention
should be given to its careful handling.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Procedure Up to Projecting to the Screen
Perform setup adjustments in the following order.
1
2
Position the projector
Determine the locations to set up the screen and the projector.
See “Placement Guide” on Page E-15.
Connect the video equipment and personal computer
Connect your equipment to the projector.
When making connections with the personal computer’s RGB connector, see “Connections with
Personal Computer” on Page E-18.
When making connections with the video equipment’s video connector or an S-video connector,
see “Connections with Composite Signals” on Page E-20.
When making connections with the video equipment’s YCbCr connector or YPbPr connector,
see “Connections with Component Signals” on Page E-21.
When playing the audio through the built-in speaker of the projector, see “Connections with the
AUDIO Jack” on Page E-22.
3
4
Opening the lens cap
Connecting the power cable and switching on the power
See “Operating” on Page E-23.
See “Finishing” on Page E-25.
5
When selecting the language of menu displays, etc.
(Only when the power is first switched on following purchase)
See “When [Menu Language Select] Is Displayed Upon Switching On the Power” on Page E-24.
6
7
8
9
Switching on the power of the personal computer and video equipment
Properly adjust the projection image to the screen
See “Adjustment of the Projection Screen” on Page E-26.
Selecting input equipment
See “Input Selection” on Page E-28.
Adjust the screen or video image
Adjust the image to the optimum condition as required.
See the Table of Contents for the adjustment items.
About DLP projectors
Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may
be black spots or bright spots among the picture elements.
Note:
* Please purchase a screen.
* A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr
connectors.
* A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other
equipment with YPbPr connectors.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Placement Guide
• Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or
to find out the approximate size of a screen that will be required.
• Refer to the projection distance table for your projector model.
• When suspending the projector from the ceiling, change the projection method. See “Vertical Flip” on E-53.
Screen Size and Projection Distance
• The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.81 m (45.31 feet).The projector
should be placed within this range.
Screen Size Designation (Inches)
300"
Height from center of
lens to top edge of
the projection
250"
200"
h1
150"
Height from center of
lens to bottom edge
of the projection
120"
100"
80"
40"
h2
33"
27"
60"
45.31)
–
1.20
(3.94)
STA
TUS
ST
A
NDB
Y
ST
A
NDB
37.73)
11.50
Y
AUT
O
R
SOU
RCE
–
S
V
1.48
–
IDE
O
VID
EO
AUD
IO
MO
USE
4.86)
PC
CON
TR
L
–
13.81(37.73
1.23
–
30.15)
9.57
1.80
–
–
–
(4.04
5.91)
Unit: m (feet)
2.73
–
–
1.49
(4.89
11.50(31.40
8.96)
–
11.98)
22.57)
–
–
14.99)
18.04)
2.26
(7.41
–
–
9.19(25.10
–
Lens surface of the
main unit
3.65(9.94
7.65
–
3.03
6.88(18.80
–
4.57(12.47
5.50(14.99
–
–
5.73
3.80
4.57
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Placement Guide
Width
Screen size (Diagonal)
Height
Screen Size Width x Height
Projection Distance
(m) (feet)
Wide – Tele Wide – Tele
Height h1
Height h2
Screen Size
Designation (Inches)
(m)
(feet)
(m)
(feet)
(m)
(feet)
1.57
1.94
0.23
0.30
0.36
0.52
0.72
0.89
1.05
1.31
1.77
2.20
2.66
27"
33"
0.56
ן 0.41 0.67
ן 0.50 0.81
ן 0.61 1.21
ן 0.91 1.62
ן 1.21 2.03
ן 1.52 2.43
ן 1.82 3.04
ן 2.28 4.06
ן 3.04 5.08
ן 3.81 6.09
ן 4.57 — – 1.20
1.23 – 1.48
1.49 – 1.80
2.26 – 2.73
3.03 – 3.65
3.80 – 4.57
4.57 – 5.50
5.73 – 6.88
7.65 – 9.19
9.57 –11.50
11.50 –13.81
0.48
0.59
0.72
1.07
1.43
1.79
2.14
2.68
3.58
4.48
5.38
0.07
0.09
0.11
0.16
0.22
0.27
0.32
0.40
0.54
0.67
0.81
— – 3.94
4.04 – 4.86
4.89 – 5.91
7.41 – 8.96
9.94 – 11.98
12.47 – 14.99
14.99 – 18.04
18.80 – 22.57
25.10 – 30.15
31.40 – 37.73
37.73 – 45.31
1.83
ן 1.35 2.19
ן 1.64 2.65
ן 2.00 3.96
ן 2.98 5.31
ן 3.96 6.66
ן 4.98 7.97
ן 5.97 9.97
ן 7.48 13.32
ן 9.97 16.66
ן 12.50 19.98
ן 14.99 2.36
40"
3.51
60"
4.69
80"
5.87
100"
120"
150"
200"
250"
300"
7.02
8.79
11.75
14.70
17.65
* There is a tolerance of 5% due to design values.
* This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition
(with front and rear adjusters fully withdrawn).
E-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Placement Guide
Installation Height of Projection Screen [Reference]
Once the installation location and position have been decided, the projection height should be checked. In the case of large
screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.
The required installation height can be found using the following formula:
[Height from center of lens to top edge of the projection] m (feet) + 0.05m (0.16 feet) + Stand height
Example: Using a 150" 4:3 screen and placing the projector horizontally, the required installation height will be
2.68m (8.79 feet) + 0.05m (0.16 feet) = 2.73m (8.95 feet) (without a stand)
An installation room with a height of 2.4m (7.87 feet) will have insufficient room height even when the projector is placed on
the floor. (Note that the rear adjusters can be raised to lower the projection screen image.)
Screen size vertical dimension
Lens center
Screen size top
edge dimension
measured from
floor
h2 dimension
Approx. 0.05 m (0.16 feet)
Stand dimension
E-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at
conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equip-
ment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home
theater.
Connections with Personal Computer
Please check the following before making connections with the personal computer.
•
A suitable resolution for the U5-732 is 1024
ן 768 dots (XGA) and the maximum displayable resolution is 1280 ן 1024 dots (S-XGA).
Make changes to a displayable resolution at the personal computer side. Please check with “Table of Supported Frequency”on
Page E-68.
•
The setting method for the personal computer will differ depending on the specific model. Please read the personal computer
instruction manual or the on-line help information, or contact the manufacturer of your personal computer.
Connect the projector’s RGB connector using the included RGB signal cable.
•
When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal
cable.
•
The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “RGB”
using the menu sequence of [Setup] → [Input Format] → [RGB].
See “Input Format” on Page E-56.
•
If the USB cable is connected to the projector’s MOUSE connector, mouse operations can be performed on the computer from
the projector’s remote control unit.
See “Performing Mouse Operations on the Computer with the Remote Control Unit” on Page E-35.
MONITOR OUT
Personal
computer
RGB signal cable (Supplied item)
Note:
* Before making connections, check the power of the projector and the equipment to be connected is switched off.
* When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer
startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the on-
line help.
E-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
To Output the External Output Signal of a Notebook Computer
When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook
computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your
notebook computer or the on-line help while performing the following procedure.
Check whether a signal is being sent from the notebook computer to the projector.
An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external
output signal is being output.
1
REFERENCE: When “Resolution” or “Frequency” is not displayed under “Info.” on the menu of the projector, this means that
the external output signal is not being output from the personal computer. See “Resolution/Frequency” on Page E-60.
Should a sign not be output from the notebook computer, please try the operation described below.
For an IBM PC/AT compatible computer, press the [Fn] key plus any one of the [F1] to [F10] keys. (See the table below.)
2
Manufacturer
DELL
Model
Key
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
All computers
Fn + F8
Fn + F8
Fn + F10
Fn + F3
Fn + F7
Fn + F3
Fn + F3
Fn + F5
Fn + F7
Fn + F3–F5
Fn + F5
Fn + F10
EPSON
FUJITSU
iiyama
IBM
NEC
Panasonic
SHARP
SONY
SOTEC
TOSHIBA
Victor
Note: Table information is current to December 2003.
Note:
When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be
correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook
computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the
liquid crystal panel which might result in external output only.
E-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with Composite Signals
Video Equipment with VIDEO Connectors
• Make the connection to the VIDEO connector of the projector using the supplied Video cable.
• The input setting of theVIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please
change the input setting to “Your Country’sTelevision Broadcast System” using the menu sequence of [Setup] → [Input Format]
→ [Video].
See “Input Format” on Page E-56.
Video Equipment with S-VIDEO Connectors
• Make the connection to the S-VIDEO connector of the projector using the supplied S-video cable.
• The input setting of the S-VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project,
please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input
format] → [S-Video].
See “Input Format” on Page E-56.
Video deck, DVD player, document
camera, etc.
S-VIDEO
VIDEO
Video cable (Supplied item)
S-Video cable (Suppled item)
E-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Equipment Has a YCbCr Connector or YPbPr Connector
• The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Compo-
nent” using the menu sequence of [Setup] → [Input Format] → [RGB].
See “Input Format” on Page E-56.
• When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or
another color, change the setting under the menu of [Color] → [Color Space].
See “Color Space” on Page E-50.
Component cable (Available as an option)
Order code: 28-690
Green
Blue
Red
Y
Cb
Cr
COMPONENT
COMPONENT
Y
Pb
Pr
Green
Blue
Red
Component cable (Available as an option)
Order code: 28-690
E-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Personal Computers and Video Equipment
Connections with the AUDIO Jack
* Make the connection to the projector’s AUDIO jack using the supplied audio cable. When the audio jack of the equipment that
is to be connected is of the RCA phono type, make connection via the supplied audio conversion adapter.
* The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the
audio output of the video equipment to your audio system.
* The built-in speaker outputs the audio of the equipment connected to the AUDIO jack.
White
AUDIO OUT
Audio cable (Supplied item)
L
R
Audio conversion adapter
(Supplied item)
Red
Audio cable (Supplied item)
E-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1
Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
STATUS
S
ATU
ST
BY
D
AN
ST
ANDBY
ST
To wall outlet
AUTO
SOURCE
PC CONTROL
STANDBY
Lit amber
MOUSE
AUDIO
VIDEO
S
VIDEO
Firmly plug in all the way.
RGB
Switch on the projector power
Press the STANDBY button.
2
This indicator is also lit green in Eco-mode.
STATUS
STATUS
STATUS
(button on main unit)
STANDBY
The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page E-24 for infor-
mation about language selection.
• When the power is turned on, the STANDBY indicator starts
flashing green, then stops flashing after about 60 seconds. If
the STATUS indicator lights green at this time, the lamp mode
is set to “Eco”. See E-55 for instructions on selecting.
• If the power does not come on, see “When the STATUS Indica-
tor is Lit or Flashing” on Page E-61.
STANDBY
STANDBY
STANDBY
Flashing green
(Approximately 60
seconds)
Lit green
Power is on
Lit amber
If the “Password” input window is displayed: See E-38.
A password is set for this projector.
The projector cannot be used unless the correct password is in-
put.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
To turn off the power: See E-25.
Q
The projector is now capable of regular projection.
Switch on the power of the connected equipment
3
Note:
•
When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
•
•
Press the STANDBY button after the STANDBY indicator is lit in amber.
The included power cable is exclusively for use with the U5-732. Never use it with other products.
E-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Cable Connections and Switching the Power On/Off
When [Menu Language Select] is Displayed Upon Switching On the Power
The first time the power is switched on after purchase, [Menu Lan-
guage Select] will be displayed. Follow the procedure described be-
low and select the display language of the projector.
If the image is blurred, turn the focus ring counterclockwise or clock-
wise to focus it. See Page E-27.
Cursor
Press the SELECT (̆̄) buttons of the Remote con-
trol and align the deep blue cursor with [English].
1
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
3
4
Press the ENTER button to set.
This will set the language and [Menu Language Select] will close.
2
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
3
4
This completes the selection of the display language.
Caution:
[Menu Language Select] will not appear the next time the power is switched on.
Should a change of language become necessary, see “Language” on Page E-57.
E-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Cable Connections and Switching the Power On/Off
Finishing
1 Switch off the power of the connected equip-
ment
2 Switch off the power of the projector
Press the STANDBY button.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
(button on main unit)
STANDBY
The [Power Off] display appears.
When the level gauge reaches maximum, the projection screen
will go off (in about 5 seconds) and the projector will enter the
power-off operation.
Note
* The operation can be cancelled by pressing a button other than
the STANDBY button.
Power Off
OK
?
* One more press of the STANDBY button will switch off the power.
The STANDBY indicator changes to flashing amber and lights a
steady amber after about 90 seconds (when the unit enters the
standby mode).
STATUS
STATUS
STATUS
STANDBY
STANDBY
STANDBY
Flashing amber
(Approximately 90
seconds)
Lit amber
Standby mode
Lit green
3 Unplug the power cable
Check that the STANDBY indicator is lit in amber and then
unplug the power cable.
The STANDBY indicator will go off when the power cable is un-
plugged.
Warrning
Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp
or damage the projector.
E-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment of the Projection Screen
Switch on the power of the connected equipment and make the adjustments with the video signal being input to the
projector.
Adjustment of the Projection Screen
1
Turn the zoom ring to adjust the screen size of the projection image.
Adjust the image to match the desired screen size. When outside of the adjustment range, move the projector to the rear or
forward.
Zoom ring
Adjust the projection image to the screen.
Check that the screen is set level and vertically.
2
(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of
the projector lens.)
(2) If the image is shifted vertically, move the image up or down with the adjuster. See “Making Adjustments with the Adjust-
ers” on Page E-27.
(3) If the image is slanted, adjust by turning the right or left adjuster. See “Making Adjustments with the Adjusters” on Page
E-27.
(4) A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the
screen. Set the projector so that it is pointing straight toward the screen.
(5) If the image shows keystone distortion, adjust using remote control or menu operations. See “Keystone” on Page E-53.
(2)
(3)
(1)
(4)
(4)
(3)
(5)
E-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment of the Projection Screen
Turn the focus ring and adjust the focus of the screen
3
Focus ring
Making Adjustments with the Adjusters
Raising the projection image
While viewing the projection image, (1) press and hold
the front adjuster buttons located at the left and right and,
(2) raise the projector to align the image with the screen,
then release your fingers.
Turn the left and right front adjusters for fine adjustment.
Adjust so that there is no shaking of the projector.
( )
1
S O U R C E
A U T O
A N D B Y
S T
Y
D B
A N
S T
S
T A T U
S
( )
1
( )
2
Adjuster button
Lowering the projection image
Lower the front adjusters using the operation described
above.
To lower the projection screen further, raise the rear ad-
juster. Fine adjustments are made by turning the left and
right front adjusters. Make adjustments so that there is
no rattling.
S
U
T
A
ST
Y
B
D
N
A
ST
ANDBY
ST
AUTO
SOURCE
L
O
R
T
N
O
C
C
P
E
S
U
O
M
IO
D
U
A
O
E
ID
V
O
E
ID
V
S
B
G
R
Note:
When the projector has a suspended or rear installation is used, the orientation of the projection will need to be changed.
Please see “Vertical Flip” on Page E-53.
E-27
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
This section describes the use of direct operation with the main unit or remote control buttons.
For information about operation using the menu, see “Menu Operation Method” on Page E-40 and the various items on
Pages E-47 to E-60.
Input Selection
This operation selects the input signal to be projected.
STANDBY
Main unit operation: Press the SOURCE button.
(It will not function while the menu or the quick menu is displayed.)
AUTO
When Auto Source is On
Whenever the SOURCE button is pressed, the projector automatically selects
SOURCE
another source that has the next input signal.
When Auto Source is Off
The input selection condition used last time will be set.
Each press of the button moves the selection one step in the sequence of RGB →
VIDEO → S-VIDEO. Note that the various input signals will become the signal
type set with [Input Format] See“Input Format” on page E-56.
Remote control operation: Press the desired input selection button.
RGB button ........ Switches the RGB input.
VIDEO button..... The input switches between VIDEO and S-VIDEO each time the button is
STANDBY
LASER
AUTO
pressed.
RGB
VIDEO
When Auto Source is On
When an input signal is not present at the selected source, the projector automati-
MENU
QUICK
Q
cally selects the next source that has an input signal.
R-CLICK/
CANCEL
ENTER
When Auto Source is Off
The projector switches to the selected source regardless of whether an input sig-
FREEZE MUTE
TIMER
nal is present.
1
2
VOL
ZOOM
Note:
3
4
* When you do not operate source selection, the projector will assume the input selec-
tion condition that was previously used.
* See “Auto Source” on Page E-54 for information about the Auto Source on and off
conditions.
E-28
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Automatic Adjustment
This function automatically adjusts the position shift, screen size, vertical stripes,
and color infidelity of the projected analog RGB input signal.
Normally automatic adjustment is performed at the time of signal selection.
STANDBY
AUTO
Main unit operation/Remote control operation: Press the AUTO button.
(This will not function while the menu or the quick menu is displayed.)
A press of the AUTO button starts the automatic adjustment.
SOURCE
Note:
* If the display position is shifted, vertical lines appear on the picture, or the projection
is not good even after using automatic adjustment, please perform image adjustment
manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page E-47.
* When the image extends beyond the boundaries of the screen or is smaller than the
screen, set Aspect to “Auto”. See “Aspect” on Page E-52.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
3
4
E-29
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
STANDBY
LASER
AUTO
RGB
VIDEO
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE
TIMER
MUTE
1
2
VOL
ZOOM
3
4
Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
STANDBY
LASER
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.
RGB
VIDEO
AUTO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
3
4
E-30
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
(1) Press the ̆ or ̄ VOL button to adjust the volume.
The volume adjustment display appears when one of the buttons is
pressed.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
The ̆ button increases the volume and the ̄ button decreases the
volume.
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
(2)
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
1
2
VOL
ZOOM
3
4
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
* Please make connections to the AUDIO connectors of the projector with the
supplied audio cable.
(1)
E-31
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and video
image.
(1) Press the ZOOM button to enlarge the image.
The zoom display appears when the ZOOM button is pressed.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
Each press of the ̆ button enlarges the image and each press of the
̄ button makes the image smaller (returning it to 1:1).
(2)
(3)
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
(1)
3
4
Zoom
0
Zoom
21
(No enlargement)
(Approximately 2 times enlargement)
(2) Pressing the SELECT (̆̄̇̈) buttons on the remote control at
the time of the zoom operation will cause the display position to
move.
(There will not be any movement when zoom is at 0.)
Zoom
21
Zoom
21
(Approximately 2 times enlargement)
(Movement)
(3) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
After magnifying the image, be sure to use the ZOOM button to bring the gauge
value back to “0”.
The image can also be moved in the following circumstances.
•
When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is higher than the display
resolution of the projector.
•
When “Aspect” is set to “Zoom” by the video signal.
Note:
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected
so that they are not conspicuous.
* Movement of the screen will not be possible when the menu screen is being displayed.
E-32
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Using the Presentation Timer
The presentation is given while checking the timer displayed on the
screen.
The gauge display allows the remaining time to be known at a glance.
(1) Press the TIMER button to show the settings display.
The display will close when an operation has not been made for about
10 seconds.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
(2)
(3)
[Timer settings display]
CANCEL button
(1)
R-CLICK/
CANCEL
ENTER
Press the CANCEL button to close the display immediately.
FREEZE MUTE
TIMER
(2) Use the ̇ and ̈ SELECT buttons to set the time.
The setting contents are “Off” and from 10 to 60 minutes (in 10-minute
intervals)
1
VOL
2
ZOOM
3
4
Settings can also be made with the SELECT (̇̈) buttons.
(3) Press the ENTER button and start the timer.
• The display of the timer setting will close, the display of the timer
will appear and simultaneously the timer will start.
Gauge (Blue)
[Timer Display]
The blue gauge indicates the remaining time. When the gauge
disappears,the time is up.
The gauge continues to be displayed when the timer is stopped.
When the remaining time is “0”
(Gray)
• Press the ENTER button to restart the timer. The timer will start
with the same time setting.
• Press the CANCEL button to close the timer display.The timer set-
ting will return to “Off”.
Moving the Position of the Timer Display
The SELECT (̆̄̇̈) buttons on the remote control permit movement
within the movable range of the timer display.
Movable Range of the Timer Display
Note:
* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will
still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.
E-33
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Using the Laser Pointer
The remote control unit’s laser pointer can be used to point to the section currently being explained, making presenta-
tions more effective.
CAUTION
Do not look at the laser pointer’s light source.
Be sure to heed the following. Pointing the laser beam at
the eyes could lead to reduced vision or vision impairment.
• Never look at the laser pointer’s light source.
• Do not point the laser beam at people.
• Do not let children use the laser pointer.
This label is located on the side of the remote control.
Operation
The red laser beam is emitted from the tip of the remote control
unit while the LASER button is pressed in. Point the remote con-
trol unit’s transmitter in the direction you want to indicate.
The laser beam turns off when you release your finger from the
LASER button.
S
T
A
N
D
B
Y
L
A
S
E
R
T
O
Q
U
IC
K
E
Q
N
T
E
R
F
R
E
E
ZE
R-CLICK/
CANCEL
M
U
T
E
T
IM
E
1
2
V
R
O
L
3
4
Z
O
O
M
LASER
Note:
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal transfer will be suspended. To resume
transferring signals, press the button again.
Also, to use the jog button after signal transfer has been suspended, first press any other button, then press the jog button.
E-34
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Performing Mouse Operations on the Computer
with the Remote Control Unit
When a computer and the projector are connected, mouse operations can be performed on the computer using the
projector’s remote control unit. When projecting images from the computer, the projector can be operated and mouse
operations on the computer performed with the same remote control unit, making for efficient presentations.
Connecting the computer and projector
Use the USB cable included with the projector to connect the computer’s USB (type A) connector to the projector’s MOUSE
connector.
Note:
* Be sure to plug the cable in securely.
* Depending on the type of connection, the computer’s operating system, etc., it may be necessary to change settings or restart the com-
puter after making the connections.
USB connector
USB cable (mini B to A type) (Supplied item)
Functions of the mouse function buttons
When operating, point the remote control unit’s transmitter towards the remote control sensor on the projector.
L-CLICK button (on back)
Press this to perform the left-click operation.
STANDBY
LASER
AUTO
VIDEO
RGB
JOG buttons
These move the computer’s pointer in the corresponding direction.
MENU
QUICK
Q
R-CLICK button
Press this to perform the right-click operation.
R-CLICK/
CANCEL
ENTER
INFORMATION
FREEZE MUTE
TIMER
The R-CLICK/CANCEL button is used for both the projector and mouse func-
tion. When the R-CLICK/CANCEL button is pressed while a menu is open, the
menu is closed.
1
VOL
2
ZOOM
3
4
Note:
Connections with USB Cables
* For PC/AT compatible computers, this function cannot be used with operating systems other than Windows 98SE, Me, 2000 and XP. For
Macintosh computers, this function cannot be used with operating systems other than OS 9 and later.
* When the cable is disconnected and then reconnected to the USB port of the personal computer or the MOUSE connector of the projector,
allow at least 5 seconds before reconnecting. Do not repeatedly disconnect and reconnect the cable in a momentary fashion. The personal
computer may not be able to correctly identify the projector as a result.
* The supplied USB cable is a dedicated cable for this projector. There is no guaranty that it will work in connections with other USB
equipment.
* This function may not work with some computers.
E-35
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Controlling the Projector from a Computer
Use the control connector if the projector cannot be operated with the remote control unit, for example when it is
suspended from the ceiling.
Connecting the computer and projector
Use a commercially available serial cable (D-Sub 9-pin, straight) to connect the computer’s RS-232C connector to the projector’s
control connector (PC CONTROL).
RS-232C
connector
Serial cable (D-Sub 9-pin, straight) (commercially available)
Note:
* This function may not work with some computers.
* Specialized knowledge is required to use the control connector. Consult a specialist, such as the person suspending the projector from the
ceiling.
E-36
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use.
Registering the password
The password is registered using the menus. For instructions on operating the menus, see “Menu Operations” on E-40.
(1) Select “Security Lock” in the “Option” menu and set it to “Enable”.
The menu closes and the password registration display appears.
(2) Use the number buttons (1 to 4) to register the password.
Be sure to input a 4-digit number.
Example: Registering the password “2441”
(1) Press number button “2”. An “ ” (asterisk) appears at the first place.
STANDBY
LASER
AUTO
RGB
VIDEO
*
Next press number buttons “4”, “4” and “1” in that order.Asterisks appear
in all four places.
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
(2) Input the password again. An “ ” appears when the input number
3
4
*
matches. If there is a mistake, the asterisks turn off. Start over from step
(1) above.
If the password matches, the password registration display closes.
Note:
To cancel the number you have input, press the CANCEL button.
The asterisks disappear and the display returns to the input standby mode at the first
place.
To cancel the password registration mode, press the CANCEL button again. The “Pass-
word” display turns off.
This completes password registration.
The “Password” input display appears the next time the power is turned
on.
Note:
The numbers you have input are not displayed. Be sure to write down the password
and store it in a safe place.
E-37
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
If the password input display appears when the power is turned on
When a password has been registered, the “Password” input window appears on the projected image when the power is turned
on.The projector continues projecting this image until the correct password is input.At this time, only the STANDBY button (power
off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see
E-37.
Input the password using the number buttons (1 to 4).
Be sure to input the registered 4-digit number.
Example: To input the password “2441”
Press number button “2”. An “ ” (asterisk) appears at the first place.
*
[Password input window]
Next press number buttons “4”, “4” and “1” in that order. Asterisks appear in all
four places.
If the password matches, the window turns off and the projector can be used
normally.
Canceling the password/Changing the password
The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operations” on
E-40.
Canceling the password
Select “Security Lock” in the “Option” menu and set it to “Disable”.
This clears the password and disables the security lock.
The password input display no longer appears when the power is turned on.
Changing the password
After setting “Security Lock” to “Disable” as described above, set it back to “En-
able”. The menu closes and the password registration display appears.
Register the new password. See “Registering the password” on E-37.
E-38
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Using the Quick Menu
This function permits frequently used adjustments to be performed
quickly.
Note that the Quick Menu will not be displayed unless the signal of the con-
STANDBY
LASER
AUTO
nected equipment is input. Please select the input that you wish to adjust.
RGB
VIDEO
MENU
QUICK
Q
(1)
(2)
(1) A press of the QUICK MENU button brings up the quick adjustment
display.
Further presses cause the adjustment display to change in sequence.
The adjustment display can be selected with use of either the SELECT ̆ or
̄ button.
R-CLICK/
CANCEL
ENTER
(3)
FREEZE MUTE
TIMER
(2) Press the cursor ̇ or ̈ button to make the adjustment.
1
2
VOL
ZOOM
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 seconds, the display
will close automatically.
3
4
Content of Adjustments and Settings
Example: Brightness adjustment display
Display Item
Adjustment/Setting
Brightness
Contrast
Adjusts the brightness of the image. See page E-47.
Adjusts the contrast of the image. See page E-47.
Keystone
Corrects (vertical) keystone distortion of the screen. See page E-53.
This function adjusts the volume of the built-in speaker. See page E-31.
Sets the time of the presentation timer. See page E-33.
Select the preset color mode. See page E-49
Volume
Presentation timer
Quick Color Adj.
E-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
• This section describes only the menu operation method. Please see this item should you need information while
performing menu operations.
• For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-
tions.
• Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
• The remote control should be pointed toward the remote control sensor of the projector and operated.
• To return the various items that have been changed via the menu to their standard values (i.e., default values at time
of shipping from the factory), see “Factory Default” on Page E-59. (Some items will not return to their initial values.)
• The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting
items that can be used with the input signal are displayed on the menu.
Names and functions of remote control unit buttons used for menu operations
MENU button
Used for menu display and menu closure.
STANDBY
LASER
AUTO
VIDEO
RGB
MENU
QUICK
Q
SELECT (̆̄̇̈) buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
R-CLICK/
CANCEL
ENTER
CANCEL button
Used to return to menu name selection as well as to close
TIMER
FREEZE MUTE
the menu (and the sub menu display).
1
2
VOL
ZOOM
ENTER button
3
4
Used to set the verification display.
E-40
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
Menu Screen Names and Functions
Menu Name
Cursor (Deep Blue)
This is the title of the menu.
There is a change to the title screen
when the menu is selected.
The cursor moves to the selected menu
name.
This permits setting/adjustment of the
item located at the cursor position.
Item Name
This is the name of the ad-
justment or setting.
Icon: Pressing the ENTER but-
ton displays the sub menu or set-
ting contents.
Adjustment Bar and Settings Contents
Adjustment Bar: The increases and decreases in bar length
express the adjustment condition.
Setting Contents: Displays the contents that have been set.
Sub menu
Adjustment Bar
Item Name
Settings Contents
E-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
Performing Menu Operations
• Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
• The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
• The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input
the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the “Keystone” item name is selected.
Menu Display
Press the MENU button to display the menu
1
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
Press the SELECT (̇̈) button to select the menu name
2
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Each press of the SELECT ̈ button advances the selection one step in the sequence of “Color” → “View” → “Setup” →
“Option” → “Info.” → “Image”. Each press of the SELECT ̇ button causes a return of one step.
The cursor moves to the selected menu name.
Note:
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
E-42
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
Displaying the Cursor
3
Press the ̄ SELECT button to display the item name selection cursor.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
This condition al-
lows selection of the
item name.
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Selection of the Item Name
Press the SELECT (̆̄) button to align the cursor with the item name
4
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Items for which the Icon Is Displayed
Press the ENTER button to display the submenu.
Press the SELECT (̆̄) button and align the cursor with the desired item name.
There are also some items for which the setting display or the verification display will appear. Please see the various item
descriptions.
R-CLICK/
CANCEL
ENTER
Sub menu
FREEZE MUTE
TIMER
1
2
VOL
ZOOM
3
4
Making Adjustments/Settings
Press the SELECT (̇̈) button and make the adjustment (or setting) while viewing the image
5
When a button is pressed, the image will also change.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to
proceed in order.
Setting display: The setting contents display changes with each press of the button.
E-43
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
Closing the Menu
6
Press the MENU button and close the menu display
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL but-
ton and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Press the SELECT (̇̈) button and select the menu
name.
(Menu names cannot be selected when the item name
cursor is displayed.)
STANDBY
LASER
AUTO
RGB
VIDEO
MENU
QUICK
Q
R-CLICK/
CANCEL
ENTER
FREEZE MUTE
TIMER
Note:
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while
the quick menu is displayed will close the quick menu and display the menu.
E-44
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
[Example of Menu Display Items at theTime of Input Signal RGB Selection]
Sub Menu
Item Name
Menu name
Image
Item Name
Reference
Page
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Brightness
Contrast
E-47
E-47
E-47
E-47
E-47
E-47
E-48
E-48
E-48
E-48
E-49
E-49
E-50
E-50
E-50
E-51
E-52
E-52
E-53
E-53
E-53
E-53
Color
ࠗ
Tint
Sharpness
Picture Adj.
Fine Picture
H Position
V Position
Reset
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Color
View
Quick Color Adj.
Gamma
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Color Temp.
White
Color Space
White Balance
Aspect
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Filter
Vertical Flip
Horizontal Flip
Keystone
Keystone Save
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
E-45
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation Method
Sub Menu
Item Name
Input Signal
Menu name
Setup
Item Name
Reference
Compo
R
n
G
entVIDEOS-VIDEO
B
Page
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Auto Source
Auto Power Off
Memu Position
Lamp Mode
E-54
E-54
E-55
E-55
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
Input Format
RGB
E-56
E-56
E-56
E-56
E-57
E-57
E-57
E-58
E-58
E-59
E-59
E-59
E-60
E-60
E-60
Video
S-Video
Presentation Timer
Language
Option
Info.
On Screen
Background
Startup Screen
Security Lock
Status
Factory Default
Lamp Timer Reset
Resolution
Frequency
Lamp Timer
E-46
Download from Www.Somanuals.com. All Manuals Search And Download.
Image
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “Image”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depend-
ing on the whether the room is bright or dark. Please adjust to suit your
preference.
Select the desired item name and then adjust with the SELECT (̇̈) buttons.
ᮣ
SELECT Button
Brighter
More contrast
Denser color
More green
ᮤ
SELECT Button
Item Name
Brightness
Contrast
Color
Darker
Less contrast
Less dense color
More red
Tint
Sharper image
Sharpness
Softer image
Note:
* The adjustment values of the adjustable items are stored according to input source.
* “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or
component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selec-
tion, but when automatic adjustment is not effective, these adjustments
can be performed.
Note:
When the image extends beyond the boundaries of the screen or is smaller than the
→
screen, check that the “View” “Aspect” setting is set to “Auto”. See “Aspect” on
Page E-52.
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen.
Select the “Picture Adj.” item name and adjust with the SELECT (̇̈) buttons
so that the vertical bands disappear and brightness becomes uniform across
the screen.
E-47
Download from Www.Somanuals.com. All Manuals Search And Download.
Image
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT (̇̈) but-
tons so that the lack of color fidelity or the flickering disappears.
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT (̇̈) buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the SELECT (̇̈) buttons.
Reset
This function resets (i.e., returns to the standard settings) the adjust-
ment/setting value of the “Image” menu name.
A press of the ENTER button forces the reset.
Note:
* The item name “Fine Picture” at the time of RGB input will not be reset.
* “Reset” of the menu name “Image” can be reset for each input source.
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default”
on Page E-59.
E-48
Download from Www.Somanuals.com. All Manuals Search And Download.
Color
• Do the following operation while displaying the image you want to adjust or set.
• Select the menu name “Color”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages
E-45.
Quick Color Adj.
Select the preset color mode.
Select the “Quick Color Adj.” item name and select the setting contents with
the SELECT (̇̈) buttons.
Picture ........ Select this to prioritize color.
Standard ..... This is the standard selection. (Default setting)
Dynamic ..... Select this for prioritizing brightness.
* When “Picture”, “Standard” or “Dynamic” is selected, the “Gamma”, “Color Temp.” and “White”
adjustment items are displayed in gray and cannot be selected or adjusted.
Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can be selected
and adjusted
* The selected values for the different adjustment items are stored in the memory so the desired
color adjustments can be set.
Gamma
Gamma corrects the proportion of change of the dark portions from the
bright portions of the input signal.
Set this to reproduce natural color tone or to distinctly project a per-
sonal computer picture in a bright conference room.
Select the“Gamma”item name and select the setting contents with the SELECT
(̇̈) buttons.
Normal ....... Correction with standard settings
Natural ........ Corrects for natural color tones
Real ............ Corrects with emphasis on brightness
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“Gamma” adjustment item is displayed in gray and cannot be selected or adjusted.
E-49
Download from Www.Somanuals.com. All Manuals Search And Download.
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT (̇̈) buttons.
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ....... Produces the white of sunlight
High ............ Produces cool whites (bluish)
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“Color Temp.” adjustment item is displayed in gray and cannot be selected or ad-
justed. See “Quick Color Adj.” on E-49.
White
When projecting, this function is used to emphasize the whites of text or
diagrams on the personal computer.
Select the item name “White” and use the SELECT (̇̈) buttons to select the
setting contents.
Select the desired degree of white from among “Low”, “Medium”, and “High”.
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“White” adjustment item is displayed in gray and cannot be selected or adjusted.
See “Quick Color Adj.” on E-49.
Color Space
Set this function when a component signal (YPbPr) is projected and the
image is extremely red or extremely green.
Select the item name “Color Space” and use the SELECT (̇̈) buttons to
select a color space setting that provides a normal image.
Selection contents at the time ofYPbPr input
BT.709, SMPTE240
Note:
* When the component signal undergoes conversion processing to red, green,
and blue which express the image of the projector, the correct color cannot be
reproduced unless a system compliant with the color difference conversion sys-
tem of the input signal is used. Color Space serves to make this selection.
* The color space can only be adjusted with high definition TVs.
E-50
Download from Www.Somanuals.com. All Manuals Search And Download.
Color
White Balance
This function automatically adjusts the black level and the white level of
the analog RGB input signal to suit the personal computer.
1
Select the item name [White Balance] and press the ENTER button.
The display will change to [Input Black Signal].
2
The screen background color of the connected personal computer
will be set to black.
3. Press the ENTER button.The display will change to [Adjusting Black]
and the black level will be adjusted.
4
5
6
The adjustment of the black level is completed and the display
changes to [Input White Signal].
The screen background color of the connected personal computer
will be set to white.
Press the ENTER button.The display will change to [AdjustingWhite]
and the white level will be adjusted.
[White balance complete] is displayed for a while and the adjustment is
completed.
E-51
Download from Www.Somanuals.com. All Manuals Search And Download.
View
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “View”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Aspect
This function sets the horizontal and vertical picture proportions of the
input signal.
Select the item name “Aspect” and select the setting contents with the
SELECT (̇̈) buttons.
Personal Computer Signal
Input Signal
Auto
Direct
Real
Auto ............ Automatically enlarges or reduces the image to project
a full screen in a ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the
maximum displayable size
The setting is higher
than the display reso-
lution of the projector.
The setting is lower
than the display reso-
lution of the projector.
Real ............ Projects the input signal without pixel conversion
Video Signals
Aspect ratio selection
4:3 screen
Auto
Wide
Zoom
Auto ............ While maintaining the aspect ratio, projects a full screen
so that no portions extend beyond the boundaries of the
screen. The top and bottom of the 16:9 image becomes
black.
Wide ........... Projects to fill the full width with the entire image at 16:9.
(This feature is used to project a squeezed image in a
proper aspect ratio.)
16:9 screen
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the
screen. (Portion that extend off screen is cut.)
Note:
Please note that using this monitor for the purpose of commercial gain or the at-
traction of public attention in a venue such as a coffee shop or hotel and projecting
a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image
raises concern about the infringement of the copyright holder’s rights which are
protected by copyright law.
Note:
When selection has been made for the “Real” setting of the personal computer
signal (i.e., when the input signal and the projector display resolution are high) and
the “Zoom” setting of the video signal, pressing the SELECT (̆̄̇̈) buttons on
the remote control will permit movement of the display position. Note that there will
not be any movement when the menu or the quick menu is displayed.
Filter
This function sets the sharpness when the input signal is adjusted to
the resolution of the projector and enlarged or reduced.
Select the item name “Filter” and select the setting contents with the SELECT
(̇̈) buttons.
Smaller numerical values result in a sharper picture and larger values result in
a softer picture. Please select your desired setting value.
E-52
Download from Www.Somanuals.com. All Manuals Search And Download.
View
Vertical Flip / Horizontal Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a suspended or a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT (̇̈) buttons.
“Vertical Flip” Off
“Vertical Flip” Off
“Vertical Flip” On
“Vertical Flip” On
“Horizontal Flip” Off
“Horizontal Flip” On
“Horizontal Flip” On
“Horizontal Flip” Off
Keystone
Keystone distortion will occur when the projector and screen are on an
angle (in the vertical orientation). This function is used to correct this
distortion.
Select the item name “Keystone” and correct the keystone distortion using the
SELECT (̇̈) buttons.
Press the ̇ button.
Press the ̈ button.
Note:
* The menus and other on-screen displays cannot be adjusted.
* Please note that depending on the projected picture and the projection condi-
tions, it may not be possible to eliminate keystone distortion completely.
Keystone Save
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values
when projecting after the power cable has been disconnected and then recon-
nected.
Select the item name “Keystone Save”and set with the SELECT (̇̈) buttons.
Off .............. The keystone adjustment values return to the initial values when the power
cable is unplugged.
On............... The keystone adjustment values are retained in storage even when the
power cable has been unplugged.
Note:
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is
from the standby condition, the picture is projected using the previous keystone
adjustment values.
E-53
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
• Select menu name “Setup”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Auto Source
The Auto Source function automatically detects the input signal when
the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT (̇̈) buttons.
On............... Switches on the automatic detection function
Off .............. Switches off the automatic detection function
Signal Detection Order When On
The sequence of RGB → VIDEO → S-VIDEO is searched repeatedly.
When a signal is detected, the search is stopped and the image is projected.
Auto Power Off
This function switches off the projector power automatically when the
input of the projector enters a no-signal condition.
Select item name “Auto Power Off” and select the setting contents with the
SELECT (̇̈) buttons.
On............... The power is switched off when there is no signal.
Off .............. The power is not switch off even when there is no signal.
Operation when Function is On
• The “No Signal Power Off” display appears when a no-signal condition con-
tinues for approximately 10 seconds. The power is switched off about 5
minutes after this.
• If a signal is input during the appearance of the display and an operation
button other than the STANDBY button is pressed, the display is closed and
the function is cancelled.
Note:
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being
input to the projector and Auto Power Off is not activated.
E-54
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Menu Position
This function sets the display position of the menu.
Select item name “Menu Position” and select the setting contents with the
SELECT (̇̈) buttons.
............. Displays on the left side
............. Displays on the right side
Lamp Mode
Use this if the picture is projected on a small screen and the picture is
too bright or when projecting images in dark rooms.
Select the item name “Lamp Mode” and select the setting contents with the
SELECT (̇̈) buttons.
Eco ............. The lamp brightness is set to 80% and the lamp life is extended.
(STATUS indicator is green)
Normal ....... The lamp brightness is set to 100% and the screen is bright.
(STATUS indicator is off)
STATUS Indicator
STATUS
Note:
Frequent switching this mode can degrade the lamp.
STANDBY
E-55
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Input Format
This function is used in setting the input signals of the input connec-
tors.
Normally, this should be set to Auto.When identification is not possible
with Auto, make the setting.
Select the item name “Input Format”, press the ENTER button, and the sub
menu will open.
Select the connector that is to be changed, and select the setting contents
with the SELECT (̇̈) buttons.
[RGB]
This is the signal setting for the RGB connector.
Auto ............ Automatically identifies the signal.
RGB ............ Analog RGB signal is set.
Component . Component signal is set.
[Video] and [S-Video]
[Video] is the color system setting for the VIDEO connector and [S-Video] is
the color system setting for the S-VIDEO connector.
Auto ............ Automatic identification.
NTSC .......... Fixed to the NTSC system.
NTSC 4.43 .. Fixed to the NTSC 4.43 system.
PAL ............. Fixed to the PAL system.
PAL M ......... Fixed to the PAL M system.
PAL N ......... Fixed to the PAL N system.
PAL 60 ........ Fixed to the PAL 60 system.
SECAM ....... Fixed to the SECAM system.
Presentation Timer
The presentation is given while checking the timer displayed on the
screen.
The gauge display allows the remaining time to be known at a glance.
Select the item name “Presentation Timer” and select the setting contents
with the SELECT (̇̈) buttons.
Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.
To start the timer...
Press the MENU button and open the menu.
The timer display will appear at the lower right and the timer will start.
See “Using the Presentation Timer” on Page E-33 for details.
E-56
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
• Select menu name “Option”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Language
This function sets the language that is displayed on screen in
the messages and menu displays.
Select item name “Language” and press the ENTER button to open
the Language sub menu.
Select the language with the SELECT (̆̄) buttons.
On Screen
This function switches on/off the messages displayed with a black
frame such as the input signal information and the aspect ratio.
Select item name “On Screen” and select the setting contents with the
SELECT (̇̈) buttons.
On............... The message is displayed.
Off .............. The message is not displayed.
Note:
Even when set to off, messages that are not in a black frame will be dis-
Freeze
played.
Example of a display when the
FREEZE button is pressed
Background
This function sets the screen color when the input source is no-
signal.
Select item name “Background” and select the setting contents with
the SELECT (̇̈) buttons.
Blue ............ Sets a blue screen when there is no signal
Black........... Sets a black screen when there is no signal
E-57
Download from Www.Somanuals.com. All Manuals Search And Download.
Option
Startup Screen
This is the selection of whether or not to display the logo screen
at startup time.
Select item name “On Screen” and select the setting contents with the
SELECT (̇̈) buttons.
Logo ........... Displays the logo.
Blank .......... Does not display the logo.
Note:
When “Logo” is selected at the startup screen, the “PLUS” logo is dis-
played.
Security Lock
A password can be registered and the security lock set in order
to prevent unauthorized use of the projector.
For instructions on using the security function, see “Protecting the
Projector with the Security Lock” on E-37.
Select item name “Security Lock” and select the setting contents with
the SELECT (̇̈) buttons.
Disable ....... The security lock is disabled.
The projector can be operated without inputting the password.
Enable......... The security lock is enabled.
The security lock is activated when the power is turned on, and
the password must be input in order to operate the projector.
E-58
Download from Www.Somanuals.com. All Manuals Search And Download.
Info.
• Select menu name “Info.”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal.See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Status
This displays information about the equipment.
Select item name “Status” and press the ENTER button.
There is a change to the status display.
Press the CANCEL button to return to the menu.
Display Contents:
Projector model, firmware version, and the internet home page ad-
dress of PLUS Vision Corp.
Factory Default
This function returns the adjustments and settings of all the in-
put sources to the standard factory default values.
Select item name “Factory Default” and press the ENTER button.
There is a change to the display [Press “ENTER” to Factory Default
Set].
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to the
menu.
Items that are not set to the factory default:
Vertical Flip / Horizontal Flip, Language, Security Lock and LampTimer.
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the reset
operation when the lamp cartridge has been replaced.
Select item name “Lamp Timer Reset” and press the ENTER button.
There is a change to the display “Press “ENTER” to Lamp Timer Re-
set”.
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to the
menu.
E-59
Download from Www.Somanuals.com. All Manuals Search And Download.
Info.
Resolution / Frequency
This function displays the resolution and frequency of the detected in-
put signal.
Lamp Timer
This displays the lamp timer.
This projector has an Eco mode function. The lamp life will differ between
Normal mode and Eco mode.
Lamp Life
Use only in Normal mode: approx.2000 hours
Use only in Eco mode: approx.3000 hours
* Lamp life will differ when there has been switching between the modes.
• When Lamp Life Has Been Reached
“Replace the Lamp Cartridge” is displayed on the screen for 10 seconds in
a 1-minute interval.
Please replace the lamp with a new one.
See “Replacing the Lamp Cartridge” on Page E-64 for information about
lamp cartridge replacement.
• When Over 100 Hours Have Elapsed Since Reaching Lamp Life
(Including Eco Mode)
[Warning!! System Shutdown] is displayed for 10 seconds and the power is
switched off. Pressing the STANDBY button under this condition will not
switch on the power. Please replace the lamp cartridge.
E-60
Download from Www.Somanuals.com. All Manuals Search And Download.
When an Indicator is Lit or Flashing
The indicators on the projector’s control panel light or flash to
STATUS indicator
notify of problems, as described below.
STATUS
An indicator is also used to notify you of the currently set power
mode (under normal circumstances). See “Power Cable Con-
nections and Switching the Power On/Off” on page E-23.
STANDBY indicator
ANDBY
ST
ANDBY
ST
AUTO
Indicator status
What you should do
Lit red
STATUS
STANDBY
STATUS
STANDBY
It is time to replace the lamp.
Replace with a new lamp cartridge.
When the power is on (Lit green)
Standby (Lit amber)
The lamp has reached the end of its service life.The power
will no longer turn on.
The projector can be used for 100 hours after the lamp has
reached the end of its service life.
Replace with a new lamp cartridge.
Lit red
Flashing amber for 60 seconds, then lit
amber
The lamp cover is open.
STATUS
Flashing red
The lamp cover is not properly mounted. Mount it properly.
(lit for 1 seconds/off for 1 seconds)
STANDBY
Lit red
The temperature is abnormally high.
• The temperature protector has been activated. If the room
temperature is high, move the projector to a cool place. If
the projector’s internal temperature is high, check the cool-
ing fan’s ventilation slots and clean them if they are clogged.
• When the temperature protector is activated, the power turns
off and in some cases will not turn back on immediately. In
this case wait about 90 seconds, then try again.
STATUS
Flashing red
(lit for 0.5 seconds/off for 0.5 seconds)
STANDBY
Lit red
The fan has stopped.
Flashing red
STATUS
Unplug the power cable and contact a store that sells the
(lit for 0.5 seconds/off for 0.5 seconds)
U5-732 for repairs.
STANDBY
Lit amber
Flashing red
The lamp will not light.
STATUS
(lit for 1 seconds/off for 1 seconds)
Wait at least 90 seconds, then turn the power back on. If the
problem persists, unplug the power cord and contact a store
that sells the U5-732 for repairs.
When the lamp has burned out during use
Flashing amber for 90 seconds, then lit amber
When the lamp does not come on from the start
Lit amber
STANDBY
Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power
cable and contact your store of purchase.
Thermal Protector
When the temperature inside the projector becomes abnormally high, the STATUS indicator flashes red (0.5 seconds on/0.5
seconds off), the STANDBY indicator is a steady red, and at the same time the temperature protector operates and switches off
the power of the projector.
Should this happen, please take the following actions.
1. Switch off the power and disconnect the power plug from the wall outlet.
2. Check the following matters and take the required measures.
When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the
outflow and intake holes and clean them if they are obstructed.
3. Wait about 60 minutes until the temperature of the projector drops.
If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.
E-61
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following matters before requesting servicing.
Reference
Page
Problem
Check
• Is the power cord plugged into a power outlet?
Power does not turn on
E-23
E-66
E-61
• Is the lamp cover properly mounted?
• Is the projector’s temperature high? To protect the projector, the power can-
not be turned on when the projector’s temperature is abnormally high.
• Has the lamp reached the end of its service life?
• Depending on the timing with which the power cord is plugged in (the power
is turned on), it may happen that the STANDBY indicator (LED) does not
light and the power does not turn on. This is not a malfunction. If this hap-
pens, unplug the power cord then plug it back in.
E-61
—
• Is a connected input selected?
No image is produced
E-28
E-18–21
E-60
• Is the cable properly connected to the input terminal?
• When a computer is connected, are signals being output from the computer?
• Does the signal being input have a frequency usable with this projector?
• Are the brightness and contrast adjusted to the minimum?
• Is the STATUS indicator lit a steady red or flashing red?
• When the component signal of the DVD player is connected with the RGB
connector and the image is not output, is [Input Settings] of the RGB con-
nector properly selected?
E-68
E-47
E-61
E-56
• For a RGB input, has the picture been properly adjusted?
E-47, 48
• Is the projector properly installed?
Image is distorted
E-26
E-31, 53
• For trapezoidal (keystone) distortion, perform keystone adjustment.
Please note that depending on the projected picture and the projection con-
ditions, it may not be possible to eliminate keystone distortion completely.
• Is the lens properly focused?
Image is out of focus
E-27
E-15–17
E-15–17
—
• Are the screen and projector installed at the proper distance?
• Does the projection distance exceed the focusing range?
• Is there condensation on the lens, etc.?
If the projector is moved from a cool storage area to a warm place and the
power is turned on, condensation may form on the lens or internal optical
parts. If this happens, wait until the condensation has evaporated before
using the projector.
• For a computer input, are the horizontal and vertical positions properly ad-
Image is not in proper posi-
tion and is not displayed
properly
E-48
E-68
justed?
• Does the input signal have a compatible resolution and frequency? Check
the computer’s resolution.
• If the image is crushed in the horizontal or vertical direction or if it is not
displayed over the entire screen, select a different aspect ratio.
Video image is crushed
E-29
• When inputting component signals, is “Color Space” setting correct?
• For a composite input, is “Tint” properly adjusted?
Colors of the overall image
are strange
E-50
E-47
• From the menu, select“Image”and adjust the“Picture Adj.”and“Fine Picture”.
Characters flicker or colors
are offset for RGB inputs
E-47, 48
• Other than [Settings], [Option] and [Information], selection will not be pos-
sible unless a signal is being input to the projector and the image/picture is
projected.
Cannot select the menu
name
—
• Are the remote control unit’s batteries worn? Replace with new batteries.
• Is there an obstacle between the remote control unit and the projector’s
remote control signal sensor?
Remote control unit does
not operate
E-11, 12
E-13
• Is the remote control unit outside of range?
E-13
E-13
• Are you pointing the remote control unit’s transmitter towards the projector’s
remote control signal sensor?
• See “When an indicator is lit or flashing”.
STATUS indicator is lit red
or flashing red
E-61
E-62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
• Be certain to disconnect the power plug from the power outlet before cleaning.
• Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber
or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the
coatings may peel, etc.
Cleaning a Soiled Projector Main Unit
• Wipe with a lint-free, soft, dry cloth.
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a
chemically-treated cloth is going to be used, please follow any written warnings.
• Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings
may peel, etc.
• When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.
Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.
• Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.
Dirty Lens
• Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning
paper for eye glasses. Be careful not to scratch the lens at this time.
Dust of the Intake and Outflow Holes
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which
could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.
• Switch off the power, check that the STANDBY in-
dicator has changed to a steadily lit amber, then
unplug the power cable.
• Clean out the holes from the outside using a
vacuum cleaner. Use the brush adapter of the
S
U
AT
T
S
Y
B
D
AN
vacuum cleaner to do this. Avoid using the vacuum
directly without attaching the adapter as well as the
use of a nozzle adapter.
T
S
Y
B
D
N
A
T
S
O
T
U
A
E
C
R
U
O
S
PC CONTROL
MOUSE
AUDIO
VIDEO
S
VIDEO
RGB
Cleaning the Inside of the Projector
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected
inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact
your dealer.
E-63
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp Cartridge
• The lamp that is used as a light source in the projector has a limited service life.The rated service life of the lamp is
about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and
other factors.
Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp
means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from
test conditions at this company.)
• When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp
Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the
replacement following the procedure below.
• If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode
and no longer turns on.
• Contact a store that sells the U5-732 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the
U5-732 (order code 28-050).
CAUTION
• Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop,
disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before
replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will
cause burns because of the high temperature.
• Do not remove any screws other than those specified.
• Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.
• If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can
be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may
cause injury. If this happens, contact your dealer or the store the projector was purchased.
E-64
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp Cartridge
Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.
1 Unplug the power cord.
2 Turn the projector upside-down.
3 Remove the lamp cover.
(1) Turn the lamp cover’s set screw counterclockwise and
loosen until the screw turns freely. (The screw does
not come off.)
(2) Open the lamp cover a little, then pull it in the direc-
tion of the arrow and remove it.
4 Remove the lamp cartridge.
(1) Turn the lamp cartridge’s screw counterclockwise and
loosen them until the screw turn freely. (The screw
do not come off.)
(2) Grasp the lamp cartridge’s handle and pull upward
to remove the lamp cartridge.
E-65
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp Cartridge
5 Mount the new lamp cartridge.
(1) Push the lamp cartridge in slowly.
(2) Turn the lamp cartridge screw clockwise to tighten
them.
(Line it up with the screw holes in the projector.)
6 Mount the lamp cover.
(1) Set the tip of the lamp cover in place, then close the
lamp cover.
(2) Turn the lamp cover’s screw clockwise to tighten it.
7 Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset.
Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization
verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-59.
Note:
After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should
this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for
more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.
Contact a store that sells the U5-732 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-732 (order code
28-050).
E-66
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
U5-732
Optical
Method of projection :
DLP™ (single chip DMD)
DMD
0.7 inches 1024
ן 768 dots Lamp
200 W high pressure mercury lamp
Projection lens :
Image size
Manual zoom (
ן 1.2), Manual focus F = 2.4 – 2.6, f = 26.5 – 31.8 mm (f = 1.04 – 1.25 inch) Minimum: 27 inch (at projection distance of 1.2 m (3.9 feet) telephoto)
Maximum: 300 inch (at projection distance of 11.5 m (37.7 feet) wide)
2300 lumens (in the “Dynamic” mode)
Light Output
Contrast Ratio
2000:1 (Full on/off)
Electrical
Inputs
Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/
YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)
Full color (16,770,000 colors)
VGA (640
ן 480) expansion/true, S-VGA (800ן 600) expansion/true XGA (1024
ן 768) true, S-XGA (1280ן 1024) compression 2.8/1.4 A
Color Reproduction
Resolution
Input Current
Power Requirement
Power Consumption
100 – 120/220 – 240 V AC, 50/60 Hz
280 watts (250 watts in eco mode)
Mechanical
Dimensions Excluding Stand 216 mm (W)
ן 60 mm (H)ן 260 mm (D) (not including protrusion) 8.5 in.(W)
ן 2.4 in.(H)ן 10.2 in.(D) (not including protrusion) Weight
Approximately 2.1 kg / 4.6 lbs
Operational Temperatures
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice.
E-67
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Supported Frequency
The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table
below.
Manual adjustments may be required for some input signals. See “Picture Adj. / Fine Picture / H Position / V Position” on page
E-47, 48.
RGB
Frequency
Signal
Resolution
Video
Horizonral (kHz)
Vertical (Hz)
XGA
מ מ ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
מ ࠗ
ࠗ
ࠗ
ࠗ
מ מ מ מ מ ࠗ
ࠗ
מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ מ ࠗ
ࠗ
ࠗ
ࠗ
ࠗ
מ מ 15.734
15.625
31.5
37.9
31.5
31.5
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
48.4
56.5
57.7
60.0
68.7
64.0
35.0
49.7
60.2
68.7
33.8
28.1
45.0
31.3
31.5
60.0
50.0
70.1
85.1
70.0
70.1
85.1
70.0
85.0
60.0
72.8
75.0
85.0
56.3
60.3
75.0
72.2
85.1
60.0
70.1
72.0
75.0
85.0
60.0
66.7
74.5
74.9
75.1
60.0
50.0
60.0
50.0
60.0
VIDEO(NTSC)
VIDEO(PAL/SECAM)
VESA
640
ן 350 640
ן 350 720
ן 350 640
ן 400 640
ן 400 720
ן 400 720
ן 400 640
ן 480 640
ן 480 640
ן 480 640
ן 480 800
ן 600 800
ן 600 800
ן 600 800
ן 600 800
ן 600 1024
ן 763 1024
ן 763 1024
ן 763 1024
ן 763 1024
ן 763 1280
ן 1024 640
ן 480 823
ן 624 1024
ן 768 1152
ן 870 1920
ן 1080 1920
ן 1080 1280
ן 720 720
ן 576 720
ן 480 Apple Macintosh
HDTV (1080i)
(720p)
SDTV (576p)
(480p)
* The projector does not support the ADC connector
on Apple Macintosh.
ࠗ
מ : Supported frequency
: Not supported frequency
The display resolution is 1024
ן 768 dots.When displaying a signal with resolutions other than 1024ן 768 dots such as 1280
ן 1024, sizes of characters or lines may be uneven. E-68
Download from Www.Somanuals.com. All Manuals Search And Download.
Cabinet Dimensions
S O U R C E
A U T O
A N S D T B Y
A N S D T B Y
S T A T U S
216 (8.5)
Unit: mm (inch)
E-69
Download from Www.Somanuals.com. All Manuals Search And Download.
2005
Download from Www.Somanuals.com. All Manuals Search And Download.
|