Owner’s Manual
Blu-ray DiscTM Home Theater Sound System
Model No. SC-BTT268
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
If you have any questions contact : 1-800-211-PANA(7262)
VQT3M40-1
P
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY
INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these operating instructions carefully before using the unit. Follow the
safety instructions on the unit and the applicable safety instructions listed
below. Keep these operating instructions handy for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
1
2
3
4
5
6
7
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be
of sufficient magnitude to constitute a risk of
electric shock to persons.
8
9
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
(Inside of product)
-If you see this symbol-
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and ask
for the correct method of disposal.
VQT3M40
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
IMPORTANT SAFETY INSTRUCTIONS......... 3
Getting started
Radio
Accessory......................................................... 5
Listening to the Radio..................................... 24
•Presetting stations automatically ................................... 24
•Presetting stations manually.......................................... 24
•Listening/confirming the preset channels ...................... 25
Control reference guide.................................... 6
•Remote control................................................................. 6
•Main unit (Front)............................................................... 7
•POWER-SAVING FEATURES.................................. 7
TV
•Main unit (Rear)................................................................ 7
Playable discs/Cards........................................ 8
Unit and media care......................................... 9
Using the remote control.................................. 9
Enjoying TV with unit’s speakers.................... 25
•Surround sound effects.................................................. 25
•Sound modes................................................................. 25
Linked operations with the TV
STEP 1 : Preparing the speakers................... 10
•Preparing cables and making connection ...................... 10
STEP 2 : Positioning ...................................... 10
(VIERA LinkTM “HDAVI ControlTM”).................. 26
•Setting the audio link ..................................................... 26
•Easy control only with VIERA remote control ................ 27
STEP 3: Connections..................................... 11
•Speaker cable connection.............................................. 11
•Radio antenna connection ............................................. 11
•Connection to a TV ........................................................ 12
•Connection with Set Top Box, etc. ................................. 14
•Connection to a broadband network .............................. 15
Other devices
Using the iPod®/iPhone®................................. 27
•iPod/iPhone Connection ................................................ 27
•iPod/iPhone Playback.................................................... 28
STEP 4: AC power supply cord connection ... 15
STEP 5: Easy setup....................................... 16
•Network Easy Setting..................................................... 17
•Reprogramming the remote control................................ 17
•Firmware updates........................................................... 17
Advanced operations
Enjoying VIERA CASTTM ................................ 29
Playback menu............................................... 30
Setup menu .................................................... 31
•Speaker settings............................................................ 35
Inserting or removing media........................... 18
HOME menu .................................................. 18
Enjoying sound effects from all speakers....... 19
•Enjoying surround sound effects.................................... 19
Optional speaker settings
Playback
Speaker installation option ............................. 36
Playing video contents ................................... 20
•Other operations during play.......................................... 20
•Useful functions.............................................................. 21
•Enjoying BD-Live or picture-in-picture in BD-Video........ 21
Reference
Enjoying 3D video .......................................... 22
•3D settings ..................................................................... 22
•Useful functions.............................................................. 22
Troubleshooting guide.................................... 36
Messages ....................................................... 39
Supplemental information............................... 40
Specifications ................................................. 42
Limited Warranty ............................................ 43
Index................................................. Back cover
Playing still pictures........................................ 23
•Useful functions.............................................................. 23
Playing music................................................. 24
•Playing a track in another folder..................................... 24
VQT3M40
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
≥
Operations in this Owner’s Manual are described mainly with the remote control, but you can perform the operations on
the main unit if the controls are the same.
System
SC-BTT268
SA-BTT268
SB-HF270
SB-HC270
SB-HS270
SB-HW270
Main unit
Speaker system
Front speakers
Center speaker
Surround speakers
Subwoofer
≥ Some accessories and external devices mentioned in this Owner’s Manual that are not included with this product may
not be on sale in certain regions.
≥ Please note that the actual controls and components, menu items, etc. of your Blu-ray Disc Home Theater Sound
System may look somewhat different from those shown in the illustrations in this Owner’s Manual.
Accessory
Check the supplied accessories before using this unit.
For accessories of speakers, refer to page 10.
∏
1 Remote control
(N2QAYB000629)
∏
∏
∏
2 Batteries for remote control
1 Sheet of speaker cable sticker
1 FM indoor antenna
(RSAX0002)
∏
1 AC power supply cord
(K2CB2CB00021)
≥ Product numbers provided in this Owner’s Manual correct as of December 2010. These may be subject to change.
≥ Do not use AC power supply cord with other equipment.
≥ To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 43.
VQT3M40
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Control reference guide
13
Remote control
リワヱヶヵ
1
2
Turn the unit on and off
Select title numbers, etc./Enter numbers or characters
(ꢀ29)
モヷ
1
[CANCEL]: Cancel
3
4
5
6
7
8
9
Select the source (ꢀ18)
Basic playback control buttons (ꢀ20)
Select preset radio stations
Show status messages (ꢀ20)
Display the Home screen of VIERA CAST (ꢀ29)
Selection/OK, Frame-by-frame (ꢀ20)
Show sub menu (ꢀ21)
2
14
15
3
ㄊヱㄐㄅ
ュリヴヤ
16
17
10 These buttons are used when;
≥ Operating a BD-Video disc that includes JavaTM
applications (BD-J).
ヴユモンヤラ
ヴレリヱ
ヴユモンヤラ
ヴレリヱ
ヱロモヺ
4
ヴロヰヸ
≥ Operating contents of VIERA CAST (ꢀ29)
11 Set the sound mode (ꢀ19)/Select speaker channel
(ꢀ19)
ヱモヶヴユ
5
6
ヴヵヰヱ
ユヹリヵ
12 Select surround sound effects (ꢀ19)/Set the sleep timer
1
2
Press and hold [–SLEEP].
While “SLEEP ££” is displayed, press [–SLEEP]
several times to select the time (in minutes).
18
19
20
≥ Timer selection is up to 120 minutes.
≥ Select “OFF” when canceling the setting.
≥ To confirm the remaining time
7
8
9
Press and hold the button again.
ンユヵヶンワ
13 TV operation buttons
21
22
[Í]: Turn the television on and off
[AV, INPUT]: Switch the input select
[i j VOL]: Adjust the volume
10
11
12
14 Adjust the volume of the main unit
15 Mute the sound
≥ “MUTE” flashes on the unit’s display, while the function is
on.
≥ To cancel, press the button again or adjust the volume.
≥ Muting is canceled if the unit is turned off.
16 Show NETFLIX screen
17 Select radio stations manually (ꢀ24)
18 Exit the menu screen
19 Show HOME menu (ꢀ18)
20 Show Pop-up menu/Top menu/Direct Navigator (ꢀ20)
21 Return to previous screen
22 Show Playback menu (ꢀ30)/Select audio (ꢀ20)
VQT3M40
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Main unit (Front)
1
2
3
POWER
OPEN/CLOSE
VOL
Pull open.
iPod
SD CARD
4
5
6
7
8
9
10
6
7
8
Start play (ꢀ 20)
SD card slot (ꢀ 18)
Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20o up and down, 30o left and right
Display
1
Standby/on switch (POWER Í/I) (ꢀ 16)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Open or close the disc tray (ꢀ 18)
Adjust the volume of the main unit
Disc tray
2
3
4
5
9
10 Connect iPod/iPhone (ꢀ 27)
Stop (ꢀ 20)
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
≥ Automatic power-down function
e.g.
The main unit will automatically switch to standby mode after
30 minutes if the main unit is inactive as follows.
jThere is no audio signal from an external device.
jDisc playback is stopped/paused.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
Main unit (Rear)
1
2
3
4
5
6
7
8
9
6
5
2
1
4
3
L
3
Ω
3
Ω
R
3
Ω
L
R
3
Ω
FM ANT
LAN
AUX
75
Ω
SUBWOOFER CENTER FRONT SURROUND
1
2
3
4
5
AC IN terminal (ꢀ 15)
Speaker terminals (ꢀ 11)
Cooling fan
LAN port (ꢀ 15)
HDMI AV OUT (ARC) terminal (ꢀ 13)
6
7
8
9
FM radio antenna terminal (ꢀ 11)
DIGITAL AUDIO IN terminal (ꢀ 12 , 13)
AUX terminal (ꢀ 12)
VIDEO OUT terminal (ꢀ 12)
VQT3M40
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs/Cards
Logo
examples
Playable contents
Type
Type detail
(ꢀ40)
BD-Video
BD-RE
BD-R
Video
Video
[BD]
JPEG/MPO (3D still picture)
Video
Video
DVD-Video
DVD-R
Video
AVCHD
MP3
[DVD]
JPEG/MPO (3D still picture)
DVD-R DL
DVD-RW
+R/+RW/+R DL
Music CD
Video
AVCHD
—
Music [CD-DA]
[CD]
Music [CD-DA]
MP3
JPEG/MPO (3D still picture)
CD-R
CD-RW
—
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
(as of December 2010)
MPEG2
AVCHD
JPEG/MPO (3D still picture)
[SD]
∫ Discs that cannot be played in this unit ∫ Region management information
Any other disc that is not specifically supported or
BD-Video
previously described.
This unit plays BD-Video marked with labels containing the
region code “A”.
Example:
≥ DVD-RAM
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ DivX discs
≥ PAL discs
≥ HD DVD
DVD-Video
This unit plays DVD-Video marked with labels containing the
region number “1” or “ALL”.
≥ BD-Video discs recorded at a rate of 50 fields/sec
Example:
1
2
1
ALL
4
VQT3M40
8
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ SD card
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play on
this unit. Please refer to the recorder’s instructions.
≥ miniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
≥ Keep the Memory Card out of reach of children
to prevent swallowing.
≥ To protect the card’s contents, move the record prevention
tab (on the SD card) to “LOCK”.
∫ BD-Video
This unit supports high bit rate audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master
Audio) adopted in BD-Video.
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
≥ The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
∫ 3D
≥ 3D videos and 3D still pictures can be played back when this
unit is connected to a 3D compatible TV using a High Speed
HDMI Cable.
≥ It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording, the recording method and
how the files were created.
≥ The producers of the disc can control how discs are played. So you may
not always be able to control play as described in this Owner’s Manual.
Read the disc’s instructions carefully.
≥ 2D video can be enjoyed as 3D virtually. (ꢀ22)
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
Using the remote
control
Insert so the poles (+ and –) match those in the remote control.
∫ Clean the lens
≥ Use the lens cleaner (not supplied) to clean the unit’s lens.
∫ Clean discs
DO
DO NOT
R6/LR6, AA
(Alkaline or
manganese batteries)
Wipe with a damp cloth and then wipe dry.
Point it at the remote control signal sensor on this unit. (ꢀ7)
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
≥ Do not use the following discs:
jDiscs with exposed adhesive from removed stickers or
labels (rented discs etc).
Remove batteries if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
jDiscs that are badly warped or cracked.
jIrregularly shaped discs, such as heart shapes.
CAUTION
≥ Danger of explosion if battery is incorrectly replaced. Replace only with
the type recommended by the manufacturer.
∫ To dispose or transfer this unit
≥ When disposing the batteries, please contact your local authorities or
dealer and ask for the correct method of disposal.
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (ꢀ36, “To return all settings to the
factory preset”)
VQT3M40
≥ The operation history may be recorded in the memory of this
unit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2 : Positioning
STEP 1 : Preparing the
speakers
Caution
≥ The main unit and supplied speakers are to be used
only as indicated in this setup. Failure to do so may
lead to damage to the amplifier and/or the speakers,
and may result in the risk of fire. Consult a qualified
service person if damage has occurred or if you
experience a sudden change in performance.
≥ Do not attempt to attach these speakers to walls
using methods other than those described in this
manual.
Preparing cables and making
connection
∏
5 Speaker cables
≥ Do not touch the front netted area of the speakers.
Hold by the sides.
(REEX1266A: RED)
(REEX1267A: WHITE)
(REEX1268: GREEN)
(REEX1269: GRAY)
(REEX1270: BLUE)
How you set up your speakers can affect the bass and the
sound field.
Setup example
1
Use of the speaker cable stickers is
convenient when making cable connections.
e.g. Front speaker (L)
Place the front, center and surround speakers at
approximately the same distance from the seating position.
The angles in the diagram are approximate.
≥ Keep your speakers at least 10 mm (13/32z) away from the system for
proper ventilation.
FRONT
Lch
Speaker cable sticker (supplied)
Connector
A
B
60°
Speaker cable sticker
Color
1
2
3
4
5
6
FRONT (L)
WHITE
RED
FRONT (R)
120°
SURROUND (L)
SURROUND (R)
CENTER
BLUE
GRAY
GREEN
PURPLE
SUBWOOFER
A
Center speaker
≥ Put on a rack or shelf not to interfere with the TV's
various sensors (ambient light, etc.). Vibration caused by
the speaker can disrupt the picture if it is placed directly
Be sure to match the number on each sticker with the
connector color.
on the TV.
Front speakers
Subwoofer
Surround speakers
2 Connecting the speaker cables. Insert the
wire fully, taking care not to insert beyond
the wire insulation.
B
C
D
e.g. Surround speaker
≥ Place the speakers at the same height or higher than ear
level.
≥ Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥ You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥ Positioning speakers in front
It is possible to locate all the speakers in front of the listening position.
However, the optimal surround sound effect may not be obtainable.
≥ Place speakers on flat secure bases.
r: White
s: Blue line
≥ Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥ For optional wall mount, refer to page 36.
Push!
∫ If irregular coloring occurs on your TV,
turn the TV off for about 30 minutes.
If it persists, move the speakers further away from the TV.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify
the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables
with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the
speaker when carrying.
VQT3M40
10
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owner’s manual.
Do not connect the AC power supply cord until all other connections are complete.
Speaker cable connection
Connect to the terminals of the same color.
6 PURPLE Subwoofer
5 GREEN Center speaker
2 RED
Front speaker (Rch)
Front speaker (Lch)
1 WHITE
4 GRAY
3 BLUE
Main unit
Surround speaker (Rch)
Surround speaker (Lch)
6
5
2
1
4
3
3
Ω
3
Ω
R
3
Ω
L
R
3
Ω
L
SUBWOOFER CENTER FRONT SURROUND
Radio antenna connection
∫ Using an indoor antenna
∫ Using an outdoor antenna
Use outdoor antenna if FM radio reception is poor.
e.g.,
Main unit
Main unit
FM ANT
75Ω
FM ANT
75Ω
A
B
FM indoor antenna (supplied)
Adhesive tape
A
FM outdoor antenna [Using a TV antenna (not
supplied)]
Affix this end of the antenna where reception is best.
The antenna should be installed by a competent
technician.
B
C
75 ≠ coaxial cable (not supplied)
Antenna plug (not supplied)
VQT3M40
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
≥ The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
≥ Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
≥ Turn off all equipment before connection.
∫ OPTICAL IN
≥ After making the digital audio connection, make settings to suit the type of audio from your digital equipment. (ꢀ 20)
∫ HDMI
The HDMI connection supports VIERA Link “HDAVI Control” (ꢀ 26) when used with a compatible Panasonic TV.
≥ Please use High Speed HDMI Cables that have the HDMI logo (as shown on the back cover). It is recommended that you use
Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
≥ Audio will be output through the system's speakers when “Off” is selected in “HDMI Audio Output”. (ꢀ 33)
Connection for the standard picture and audio
VIDEO IN
To enjoy TV audio from this home theater
system’s speakers:
TV
AUDIO IN
AUDIO OUT
L
L
1
2
Connect the TV and the main unit with the
Audio cable (not supplied).
Select “AUX” as a source (ꢀ 18).
R
R
AUX
A Audio cable (not supplied)
B Video cable (not supplied)
AUX
VIDEO OUT
Connection for the better audio
VIDEO IN
To enjoy TV audio from this home theater
system’s speakers:
TV
OPTICAL
OUT
AUDIO IN
L
1
2
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(ꢀ 18).
R
A Optical digital audio cable (not supplied)
B Video cable (not supplied)
OPTICAL
VIDEO OUT
VQT3M40
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection for the best picture and audio
≥ When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled
“HDMI (ARC)”, you can connect the unit simply with a single HDMI cable.
≥ It is possible to playback 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
≥ For details, refer to the operating instructions of your TV.
∫ When the HDMI terminal on the TV is labeled “HDMI (ARC)”
What is ARC?
TV
ARC is an abbreviation of Audio Return Channel, also known
as HDMI ARC. It refers to one of the HDMI functions. When
you connect the unit to the terminal labeled “HDMI (ARC)”, the
optical digital audio cable that is usually required in order to
listen to sound from TV is no longer required, and TV pictures
HDMI
(ARC)
and sound can be enjoyed with a single HDMI cable.
To enjoy TV audio from this home theater
system’s speakers:
Select “ARC” as a source (ꢀ 18).
A HDMI cable (not supplied)
HDMI AV OUT (ARC)
∫ When the HDMI terminal on the TV is not labeled “HDMI (ARC)”
To enjoy TV audio from this home theater
TV
system’s speakers:
1
2
Connect the TV and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(ꢀ 18).
OPTICAL
OUT
HDMI
A HDMI cable (not supplied)
B Optical digital audio cable (not supplied)
HDMI AV OUT
OPTICAL
VQT3M40
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection with Set Top Box, etc.
e.g.,
To enjoy TV audio from this home theater
system’s speakers:
TV
1
2
Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
Select “DIGITAL IN” or “D-IN” as a source
(ꢀ18).
OPTICAL
OUT
A Refer to the operating instructions of the
respective devices for the optimal connections.
B Optical digital audio cable (not supplied)
C Set Top Box (Cable/Satellite), etc.
OPTICAL
VQT3M40
14
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4: AC power
supply cord
Connection to a broadband
network
The following services can be used when this unit is connected
to broadband.
connection
≥ Firmware can be updated (ꢀ 17)
≥ You can enjoy BD-Live (ꢀ 21)
Connect only after all other connections are complete.
≥ You can enjoy VIERA CAST (ꢀ 29)
For details about connection method, refer to the instructions
supplied with the connected equipment.
∫ LAN cable connection
Main unit
LAN
A
B
AC power supply cord (supplied)
To a household AC outlet
Main unit
≥ This unit consumes a small amount of AC power, even when
it is turned off. : approx. 0.4 W*
* When the “Quick Start” setting is “Off”
In the interest of power conservation, if you will not be using
this unit for a long time, unplug it from the household AC outlet.
Install this unit so that the power cord can be unplugged from the socket
outlet immediately if any problem occurs.
A
B
C
LAN Cable (not supplied)
Broadband router, etc.
Modem (Broadband) *Provided by ISP
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
VQT3M40
15
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5: Easy setup
1 Press [Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
The Easy setup assists you to make necessary
settings.
Follow the on-screen prompts to make basic settings for the
system.
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Speakers position
Specify the positioning of the surround speakers.
Speaker check
Check if the connection to each speaker is valid.
Speaker Output
OK
Make surround sound setting for speaker output.
Cinema Surround Plus
(Effective when the surround layout is selected in
“Speakers position”.)
The function creates the sound of virtual speakers to
enhance the realistic surround feeling as if the sound
comes from all directions.
Preparation
TV Audio
Turn on your TV and select the appropriate video input mode (e.g.,
Select the audio input connection from your TV,
[item with “(TV)”].
VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
Quick Start
Speed of startup from power off is increased.
3 Press [OK] several times to finish the “Easy
setup”.
After completing “Easy setup”, you can perform “Network Easy
Setting”.
≥ You can perform this setup anytime by selecting “Easy setup” in the Setup
menu. (> 34)
VQT3M40
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Easy Setting
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (ꢀ34)
≥ You can redo these settings individually using “Network Settings”. (ꢀ34)
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.
The configuration of your network is about to begin. If you
failed to make the settings, refer to “When you experience
problems with settings”.
When you experience problems
with settings
Reprogramming the remote
control
Network Easy Setting (Home Network Connection Check)
Network Easy Setting (Home Network Connection Check)
Complete.
If you have more than one Panasonic player/recorder and the
remote control operates both products at once, you will
need to change the remote control code on one product to
prevent this occurrence. (ꢀ34, “Remote Control Code”)
1. LAN cable connection
: Fail
: Fail
: Fail
2. IP address setting
3. Connection to gateway
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network
connection again. Select “No” and press [OK]
to finish Network Easy Setting.
Yes
OK
No
Firmware updates
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
Check the
following
Display
1. LAN cable connection
2. IP address setting
:Fail
≥ Connection of
the LAN
cables (ꢀ15)
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following
message is displayed.
:Fail
3. Connection to gateway
1. LAN cable connection
2. IP address setting
:Fail
:Pass
:Fail
≥ Connection
and settings of
the hub and
router
≥ Settings of “IP
Address /
New firmware is available.
Please update firmware in Setup.
3. Connection to gateway
1. LAN cable connection
2. IP address setting
:Fail
:Pass
:Pass
:Fail
To update the firmware
Press [HOME] ꢀselect “Others” ꢀ[OK] ꢀ[OK] (“Setup”)
ꢀselect “Others” ꢀ[OK] ꢀselect “Firmware Update” ꢀ
[OK] ꢀselect “Update Now” ꢀ[OK]
3. Connection to gateway
DNS Settings”
(ꢀ34)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet
:
Fail(Error code: B019)
The firmware was updated.
Current Version: x.xx
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
the error and the solution for it.
Press [OK].
OK
RETURN
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the
following website and burn it to a CD-R to update the firmware.
OK
(This site is in English only.)
To show the firmware version on this unit. (
≥ Downloading will require several minutes. It may take longer or may
not work properly depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (ꢀ34)
Display
Check the following
ꢀ34, “System Information”)
Cannot find the server. ≥ “Primary DNS” and “Secondary
(Error code: B019)
DNS” Settings of “IP Address /
DNS Settings” (ꢀ34)
Failed to connect to the ≥ The server may be busy or the
server.
service may have been
(Error code: B020)
suspended. Please wait a few
moments, and then try again.
≥ Settings of “Proxy Server
Settings” (ꢀ34) and the router.
VQT3M40
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting or removing HOME menu
Major functions of this unit can be operated from the HOME menu.
Preparation
Turn on the television and select the appropriate video input on
media
the television.
OPLOSE
VOL
1 Press [Í] to turn on the unit.
2 Press [3, 4, 2, 1] to select the item and
press [OK].
SD CARD
HOME
Internet
EXT IN
FM Radio
Home theater
Content
Videos
iPod
Photos
Sound
Music
OK
Others
≥ When inserting a media item, ensure that it is facing the right
way up.
≥ While the reading indicator is displayed, do not turn off the
unit or remove the media. Such action may result in loss of
the media’s contents.
≥ When removing the SD card, press on the center of the card
and pull it straight out.
≥ When a media is inserted, contents selection screen for
that media is displayed.
≥ If there are any other items, repeat this step.
≥ To return to HOME menu, select “HOME” or press
[RETURN] several times.
Videos/
Photos/
Music
Disc
Play back the contents.
(ꢀ 20, 23, 24)
≥ When multiple contents
are recorded, select the
types of contents or the
title.
∫ Selecting the source by the remote
SD card
control
Button
Source
Internet
Content
iPod
Displays the Home screen of VIERA CAST
(ꢀ 29)
Select disc drive or SD card drive
BD/DVD or SD card (SD) (ꢀ 20)
DISC/SD
All
Select iPod/iPhone, FM tuner or external
audio as the source
iPod (IPOD) (ꢀ 27)
RADIO/EXT-IN
iPod
Music
(ꢀ 27)
FM Radio (FM) (ꢀ 24)
To enjoy sound from the TV (ꢀ 25)
AUX*1
Videos
FM Radio
EXT IN
To enjoy the FM radio (ꢀ 24)
ARC*1
AUX*1
When using an Audio cable
DIGITAL IN*1(D-IN)
To enjoy sound from other devices
(ꢀ 25)
DIGITAL IN*2(D-IN)
ARC*1
When using an HDMI cable
(Available when using an
ARC compatible TV)
DIGITAL IN*1, 2
When using an Optical
digital audio cable
Sound
Others
Select sound quality (equalizer). (ꢀ 19)
Setup
(ꢀ 31)
SD Card
Management
Wallpaper
(ꢀ 21)
Changes the screen
background of the HOME
menu.
To show the HOME menu
Press [HOME].
≥ Items to be displayed may vary with the media.
≥ When the selector is switched, it may take time to playback the selected
video and/or audio.
*1 “(TV)” is displayed next to items set for TV AUDIO input.
VQT3M40
*2 “(CABLE/SATELLITE)” is displayed next to DIGITAL IN when set for
CABLE/SATELLITE AUDIO input.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Adjusting speaker level during play
Enjoying sound effects
from all speakers
1
Press and hold [jCH SELECT] to activate the speaker
setting mode.
2
Press [jCH SELECT] several times to select the speaker.
Each time you press the button:
Enjoying surround sound
effects
L R C RSLS SW
L R: Front speaker
(left and right: only the balance is adjustable.)
≥Press [2, 1] to adjust the balance of the front
speakers.
C: Center speaker
1 Press [SURROUND] several times to select
the effect.
STANDARD
Sound is output as it was recorded/encoded.
Speaker output varies depending on the source.
MULTI-CHANNEL
RS: Surround speaker (right)
LS: Surround speaker (left)
SW: Subwoofer
You can enjoy sound from the front speakers, as well as
the surround even when playing a 2-channel sound or
non-surround sound.
≥ The channels not included in the playing audio will not
be displayed (subwoofer is displayed even if it is not
included).
MANUAL
3
Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
≥ The selected effect will only be displayed on the main
unit.
∫ Changing the sound modes
2 While “MANUAL” is displayed, press
1
Press [SOUND] several times to select the mode.
≥ The selected mode will only be displayed on the main
unit.
[2, 1] and select the desired effect.
DOLBY PRO LOGIC II MOVIE
Suitable for movie software, or the one recorded in Dolby
Surround.
2
While the selected mode is displayed
Press [2, 1] and select the desired setting.
EQUALIZER
DOLBY PRO LOGIC II MUSIC
You can select sound quality settings.
FLAT
Cancel (no effect is added).
HEAVY
Adds punch to rock.
Adds 5.1-channel effects to stereo sources.
7.1CH VIRTUAL SURROUND
You can enjoy 6.1/7.1-channel surround-like effect using
5.1-channel speakers.
CLEAR
SUPER SURROUND
Clarifies higher sounds.
SOFT
For background music.
SUBWOOFER LEVEL
You can adjust the amount of bass.
1 (Weakest effect) to 4 (Strongest effect)
≥The setting you make is retained, and recalled every
time you play the same type of source.
H.BASS
You can enhance low-frequency sound so that heavy
bass sound can be heard clearly, even if the acoustics of
your room are not optimal.
You can enjoy sound from all speakers with stereo
sources.
2CH STEREO
You can play any source in stereo. Sound will be output to
the front speakers and the subwoofer only.
≥ When you set to “7.1CH VIRTUAL SURROUND“,
“SUPER SURROUND“ and “2CH STEREO“, “Cinema
Surround Plus“ (ꢀ31) is not activated.
≥The setting you make is retained, and recalled every
time you play from the same type of source.
CENTER FOCUS
(Effective when playing audio containing center
channel sound.)
You can make the sound of the center speaker seem like
it is coming from within the TV.
WHISPER-MODE SURROUND
You can enhance the surround effect for low volume
sound. (Convenient for late night viewing.)
≥ The sound effects/modes may not be available or have no effect with some
sources.
≥ You may experience a reduction in sound quality when these sound
effects/modes are used with some sources. If this occurs, turn the sound
effects/modes off.
VQT3M40
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing video contents
Search/Slow-motion
[BD] [DVD] [CD] [SD]
Search
While playing, press [SEARCH6] or
[SEARCH5].
1 Insert the media.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to
select the item. (ꢀ18)
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
2 Press [3, 4] to select the title and press
While paused, press [SEARCH6] or
[SEARCH5].
≥ BD-Video and AVCHD: Forward direction [SEARCH5]
[OK].
When a message screen is displayed while playing back
3D compatible video software, play back in accordance
with the instructions.
only.
The speed increases up to 5 steps.
≥ Press [1 PLAY] to revert to normal playback speed.
∫ To show menus
You can show Top Menu, DIRECT NAVIGATOR or Pop-up Menu.
Press [POP-UP MENU, TOP MENU].
≥ Press [3, 4, 2, 1] to select the item and press [OK].
Skip
While playing or paused, press [:] or [9].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
∫ To show the status messages
While playing, press [STATUS].
The status messages give you information about what is currently
being played. Each time you press [STATUS], the display
information may change or will disappear from the screen.
Frame-by-frame
e.g. BD-Video
T: Title, C: Chapter, PL: Playlist
While paused, press [2] (2;) or [1] (;1).
≥ Press and hold to change in succession forward or
backward.
≥ Press [1 PLAY] to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [1] (;1) only.
Elapsed time in the title
BD-Video
T1 C1 0:05.14
Play
0:20.52
Current position
Total time
Changing audio
≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press
[∫STOP] when you finish to preserve the unit’s motor and your television
screen.
≥ Depending on media and contents, the display may change or may not
appear.
≥ It is not possible to playback AVCHD and MPEG2 video which have been
dragged and dropped, copied and pasted to the media.
1 Press and hold [jAUDIO] to activate the
audio setting mode.
2 Press [jAUDIO] several times to select the
audio.
You can change the audio channel number or soundtrack
language, etc.
Other operations during play
These functions may not work depending on the media and its
contents.
∫ Selecting the type of audio from the
DIGITAL AUDIO IN terminal
Select to suit the type of audio from the DIGITAL IN terminal on
the main unit.
Stop
1
Press [EXT-IN] several times to select “DIGITAL IN” (D-IN).
Press [∫STOP].
2
3
Press and hold [jAUDIO] to activate to select the type.
Press [jAUDIO] several times to select the type.
MAIN
The stopped position is memorized.
Resume play function
Press [1 PLAY] to restart from this position.
SAP*
≥
The position is cleared if the tray is opened or you press
STOP] several times to display “STOP” on the unit’s display.
MAINrSAP* (stereo audio)
[∫
* “SAP” = Secondary Audio Program
(Only works with Dolby Dual Mono)
≥ “MAIN” or “SAP” is not available if “On” is selected in
“PCM-FIX” of “DIGITAL IN”. (ꢀ32)
≥ On BD-Video discs including BD-J, the resume play
function does not work.
Pause
≥ Audio that is input through the DIGITAL AUDIO IN or AUX terminals are not
output from the HDMI AV OUT terminal.
Press [;PAUSE].
≥ Press [;PAUSE] again or [1 PLAY] to restart play.
VQT3M40
20
Download from Www.Somanuals.com. All Manuals Search And Download.
∫ Deleting data/Formatting SD cards
If you no longer need data recorded on the SD card, you can
Useful functions
delete data with the following operation.
1
2
3
4
Insert an SD card.
Press [HOME].
1 Press [SUB MENU].
2 Select an item and press [OK].
Press [3, 4, 2, 1] to select “Others” and press [OK].
Press [1] to select “SD Card Management” and press
[OK].
Press [3, 4] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
While DIRECT NAVIGATOR screen is displayed
To display the titles properties (recording
date, etc.)
Properties
5
View
To select the chapter
Chapters
SD Card Management
SD card
No. of Files
6
Free space 300 MB
View
To play playlists
Playlists
View Titles
To select the title.
BD-Video Data Erase
Format SD Card
While playing
Screen
Aspect
When black bars are shown at the top,
bottom, left, and right sides of the screen,
you can enlarge the image to fill the screen.
OK
RETURN
Format this SD Card.
6
7
Press [2, 1] to select “Yes” and press [OK].
Press [2, 1] to select “Start” and press [OK].
Top Menu
To display Top Menu.
To display Pop-up Menu.
To display Menu.
Pop-up
Menu
Playing picture-in-picture
Menu
2D video can be virtually output as 3D, or
output effect of the 3D video can be setup.
(ꢀ22)
To turn on/off secondary video and audio
[DISPLAY] ꢀselect “Disc” ꢀ[1] ꢀselect
“Signal Type” ꢀ[OK] ꢀset “Video” and
“Soundtrack” in “Secondary Video” to “On” or
“Off”
3D Settings
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” (ꢀ33) is set to “4:3” or “4:3 Letterbox”,
the “Zoom” effect in “Screen Aspect” is disabled.
≥ Depending on the media and contents, displayed items are different.
Enjoying BD-Live or
picture-in-picture in BD-Video
A
B
Secondary video
Primary video
Enjoying BD-Live discs with
Internet
BD-Live allows you to enjoy more functions such as subtitles,
exclusive images and online games by connecting this unit to
the Internet. Since most of the BD-Live compatible discs are
played back using the BD-Live function, additional contents
are required to be downloaded into the external memory (local
storage).
≥ This unit is using an SD card as a local storage device.
BD-Live function cannot be used when there is no SD card
inserted.
≥ The usable functions and the operating method may vary with each disc,
please refer to the instructions on the disc and/or visit their website.
≥ Some BD-Live content available on the Blu-ray discs may require an
Internet account to be created in order to access the BD-Live content.
Follow the screen display or instruction manual of the disc for information
on acquiring an account.
≥ To use the BD-Live functions, it is recommended that you format the card
on this unit. If the SD card you use is formatted, all data on the card will be
erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(ꢀ32).
≥ When discs supporting BD-Live are played back, the player or disc IDs
may be sent to the content provider via the Internet.
1 Perform network connection and settings.
≥ During search/slow-motion or frame-by-frame, only the primary video is
displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”,
secondary audio will not be played (ꢀ32).
(ꢀ15, 17)
2 Insert an SD card with 1 GB or more free
space.
3 Insert the disc.
VQT3M40
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D video
Useful functions
You can enjoy powerful 3D videos with realistic sensations by
connecting this unit with a High Speed HDMI Cable to a 3D
compatible TV.
1
While playing,
Press [SUB MENU].
2 Press [3, 4] to select “3D Settings” and
press [OK].
3 Select an item, then press [OK].
Signal
Format
Original
Keep original picture
format.
Side by side
3D picture format
comprising of left and right
screens.
2D to 3D
Normal
Soft
Converts 2D pictures to 3D
effect.
The illustration is an image.
3D
Picture
Mode
Playback pictures with
normal 3D effects.
Preparation
Connect 3D compatible TV to an HDMI AV OUT terminal of
You can enjoy 3D pictures
with a feeling of
broadness, holding back
the depth perception.
this unit using a High Speed HDMI Cable and select HDMI
video input mode on the TV. (ꢀ12, 13)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
(ꢀ20)
Manual
Settings
Set 3D effect manually.
≥ Playback following the instructions displayed on the screen.
Distance
Set the amount of depth
perception.
3D settings
Screen Type
Selects how the screen
appears during 3D
playback (flat or round).
Frame Width
Set the amount of
feathering at the edge of
screen.
Frame Color
Set the color of feathering
at the edge of screen.
Perform the following settings as necessary.
3D BD-Video
Playback
It is also possible to play back 3D discs
in 2D (conventional video). (ꢀ31)
3D Type
If 3D video cannot be played back in
3D, change the settings as required by
the connected TV format. (ꢀ33)
≥ Change the settings for 3D on the TV
also when “Checker board” or “Side
by side” is selected.
3D Playback
Precautions
Hide the 3D viewing warning screen.
(ꢀ33)
≥ Depending on the contents, displayed items are different.
≥ Please refrain from viewing 3D images if you do not feel well or are
experiencing visual fatigue.
In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
≥ Depending on the connected TV, the video being played back might switch
to 2D video due to changes in resolution etc. Check the 3D setting on the
TV.
Pop-Out Level
Adjust the pop-up position for the
Playback menu or message screen etc.
(ꢀ30)
≥ 3D images may not output as settings of “HDMI Resolution” and “24p
Output”. (ꢀ33)
VQT3M40
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing still pictures
Useful functions
[BD] [DVD] [CD] [SD]
(BD-RE, DVD-R/R DL, CD-R/RW, SD Card)
1 Press [SUB MENU].
2 Select an item, then press [OK].
In order to play back 3D still pictures (MPO), this unit should be
connected to a Full HD 3D compatible TV via an HDMI
terminal.
While Photo View screen is displayed
Slideshow
Start Slideshow
You can display still pictures one by one at
a constant interval.
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Random Soundtrack
Background music is played in random
order.
1 Insert the media.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to
select the item. (ꢀ 18)
2 Press [3, 4] to select the folder and press
[OK].
“3D View” : 3D still pictures (MPO) are sorted here. To play
back in 3D, select from “3D View”. (Still pictures in “2D
View” are played back in 2D)
Photo View
SD card
Soundtrack
3D View
An MP3 on the iPod/iPhone or a music
CD can be played back during the
slideshow of JPEG on the SD card.
2D View
Folder Name
XXXXXXXX
Photos
42
XXXX
105
58
77
48
5
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
While playing
OK
RETURN
Page Up
Select
Page Down
Y
Page01/02
Start
Slideshow
Start the slideshow.
SUB
MENU
Slideshow
R
G
B
Screen
Aspect
Switch the screen mode.
To select folders or still pictures that are played on
slideshow.
Status
Show the still picture properties.
Rotate the still picture.
3 Press [3, 4, 2, 1] to select the still
picture and press [OK].
Rotate Right
Rotate Left
Wallpaper
Press [2, 1] to display the previous or next still picture.
Set the still picture to the wallpaper of
HOME screen. (ꢀ 18)
To exit the screen
Press [RETURN].
Pop-Out
Level
Pop-up position for the Playback menu or
message screen etc. can be adjusted
during 3D playback.
∫ To show the still picture properties
While playing, press [STATUS] once or twice.
≥ Depending on the condition of the unit and media contents, displayed items
are different.
≥ When viewing a 3D still picture, some functions may not work.
≥ When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
1 / 26
Date
Size
11/12/2007
500 x 375
Manufacturer
Equipment
≥ When both a music CD and an iPod/iPhone is inserted to this unit, the
iPod/iPhone has a priority to be played back as background music.
To exit the screen
≥ Still pictures displayed as “
” cannot be played back with this unit.
Press [STATUS].
VQT3M40
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Playing music
Listening to the Radio
[DVD] [CD]
(DVD-R/R DL, music CD, CD-R/RW)
Presetting stations
automatically
1 Insert the media.
Up to 30 stations can be set.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to
select the item. (ꢀ18)
1 Press [RADIO] to select “FM”.
2 Press [3, 4] to select the track and press
2 Press [STATUS] to select the position to
[OK].
start the auto preset search.
0.09
Track1
4.30
LOWEST:
DIRECT NAVIGATOR
CD
Music list
To begin auto preset with the lowest frequency (FM87.9 or
FM87.5).
5 Tracks / Total Play Time 20min54sec
No.
Track Name
Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
01
02
03
04
05
Track1
Track2
Track3
Track4
Track5
CURRENT:
To begin auto preset with the current frequency.*
* To change the frequency, refer to “Presetting stations
manually”.
3 Press and hold [OK].
Play
RETURN
Release the button when “AUTO” is displayed.
The tuner starts to preset all the stations it can receive into
the channels in ascending order.
“
” indicates the track currently playing.
≥ “SET OK” is displayed when the stations are set, and the radio tunes to the
last preset station.
≥ “ERROR” is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
Playing a track in another
folder
1
While the DIRECT NAVIGATOR screen is displayed
Presetting stations manually
Press [SUB MENU].
2 Press [3, 4] to select “Select Folder” and
Preparation
Select a radio broadcast.
press [OK].
1
2
Press [RADIO] to select “FM”.
Press [SEARCH6] or [SEARCH5] to select the
frequency.
≥ You cannot select folders that contain no compatible tracks.
≥ To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
1
2
While listening to the radio broadcast
Press [OK].
While “P” is flashing on the display
Press the number buttons to select a
channel.
To select a 1-digit number
e.g., 1: [1] ꢁ[OK].
To select a 2-digit number
e.g., 12: [1] ꢁ[2]
≥ A station previously stored is overwritten when another station is stored in
the same channel preset.
VQT3M40
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Listening/confirming the preset
channels
Enjoying TV with unit’s
speakers
Preparation
1 Press [RADIO] to select “FM”.
Turn on your TV and select the appropriate audio input mode
[AUX, ARC, D-IN] to suit the connections to this unit. (ꢀ18)
2 Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1] ꢁ[OK].
To select a 2-digit number
e.g., 12: [1] ꢁ[2].
Surround sound effects
You can enhance stereo sources with surround sound effect.
Alternatively, press [W, X] or [3, 4].
1 Press [SURROUND] several times to select
the effect.
∫ Display on the main unit
TUNED/STEREO:
Displayed when receiving stereo broadcasting
TUNED:
Displayed when receiving monaural broadcasting or monaural
sound is selected.
2
While “MANUAL” is displayed on the unit’s display
Press [2, 1] and select the desired effect.
Surround modes to enjoy TV audio or stereo
sources from all speakers:
≥ DOLBY PRO LOGIC II MOVIE
≥ DOLBY PRO LOGIC II MUSIC
≥ SUPER SURROUND
∫ If noise is excessive
1
Press and hold [jAUDIO] to activate to select the type.
2
Press [jAUDIO] to display “MONO”.
The sound becomes monaural.
Press the button again in step 2 to cancel the mode. “AUTO
STEREO” will be displayed on the main unit. Depending on
the broadcast system, stereo or monaural will be selected.
“MONO” is also canceled when you change the frequency.
For more detailed information on this operation, please refer to
the “Enjoying surround sound effects” section on page 19.
Sound modes
≥ This setting can be preset for each broadcasting station.
You can adjust the mode depending on the source or situation.
∫ FM frequency step
Main unit:
1 Press [SOUND] several times to select the
mode.
The factory setting is set to 0.2 MHz, it can be changed to
receive broadcasts allocated in 0.1 MHz. You may need to
change this setting if the tuner seems to skip over the correct
frequency for stations in your area.
2
While the selected mode is displayed on the unit’s
display
Press [2, 1] and select the desired setting.
For more detailed information on this operation, please refer to
the “Changing the sound modes” section on page 19.
1
2
Press [RADIO] to select “FM”.
Press and hold [RADIO].
After a few seconds the display changes to show the
current lowest frequency. Continue to hold the button
down. The lowest frequency changes and the step is
changed.
To return to the original settings, repeat steps 1 and 2.
≥ After changing the setting, previously preset frequencies will be cleared.
Preset them again.
VQT3M40
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Linked operations with
the TV (VIERA LinkTM “HDAVI
ControlTM”)
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2010)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
What is VIERA Link “HDAVI Control”?
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
VIERA LinkTM is a new name for EZ SyncTM
.
VIERA Link “HDAVI Control” is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) under “HDAVI Control”.
Speaker control
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home theater
This unit’s speakers are active.
Preparation
1
2
3
Set “VIERA Link” to “On” (ꢀ33).
(The default setting is “On”.)
Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
When the connection or settings are changed, repeat
this procedure.
≥ When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select, “AUX”*2, “ARC”*1,*2
or “D-IN” (DIGITAL IN)*2 as the source.
≥ You can control the volume setting using the volume or mute
button on the TV’s remote control.
≥ If you turn off this unit, TV speakers will be automatically
activated.
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
≥ Audio output is 2-channel audio.
Setting the audio link
∫ Setting the audio link with the TV
With the remote control:
≥ Select the actual TV audio connection on the main unit.
≥ When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
≥ The audio from “AUX”, “DIGITAL IN”, “FM Radio” or “iPod” will be output
from this unit's speakers even though the TV speakers are selected.
1
2
3
4
5
6
Press [HOME].
Press [3, 4, 2, 1] to select “Others” and press [OK].
Press [OK] to select “Setup”.
Press [3, 4] to select “TV / Device Connection”.
Press [3, 4] to select “TV Audio Input”.
Press [2, 1] to switch “AUX”, “ARC” or “DIGITAL IN” and
press [OK].
Automatic input switching
(Power on link)
≥ Select “AUX” or “ARC”*1 in “TV Audio Input” when the
DIGITAL AUDIO IN terminal is used for the STB
connection.
Whenever the connection or settings are changed, reconfirm
the points above.
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the TV is off, the TV will
automatically turn on.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
(e.g., DIRECT NAVIGATOR screen)
∫ Setting the audio link with the STB
≥ When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”*2, “ARC”*1,*2 or “D-IN”
(DIGITAL IN)*2.
≥ This function does not work when the iPod/iPhone selector is
chosen. (ꢀ28)
With the remote control:
≥ Select the STB input channel on the TV.
1
2
Press [EXT-IN] to select “D-IN”.
Press [STATUS] to select “CABLE/SATELLITE AUDIO
ON”.
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SATELLITE AUDIO OFF” in step
2 above and then repeat steps 1 to 2.
VQT3M40
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Other devices
Using the iPod®/iPhone®
Automatic lip-sync function
(for HDAVI Control 3 or later)
Compatible iPod/iPhone (as of December 2010)
≥ Update your iPod/iPhone with the latest software before using this unit.
≥ Compatibility depends on the software version of your iPod/iPhone.
≥ iPod/iPhone compatibility assures music, video playback and battery
charge functions of this unit as a home theater system.
Delay between audio and video is automatically adjusted,
enabling you to enjoy smooth audio for the picture (ꢀ 32,
“Audio Delay”).
≥ This function works only when “BD/DVD”, “SD”, “AUX”*2,
“ARC”*1,*2, “D-IN” (DIGITAL IN)*2 is selected as the source
on this unit.
Name
Memory Size
iPod touch® 4th generation
iPod nano® 6th generation*
iPod touch® 3rd generation
iPod nano® 5th generation (video camera)
iPod touch® 2nd generation
iPod classic®
iPod nano® 4th generation (video)
iPod classic®
iPod touch® 1st generation
iPod nano® 3rd generation (video)
iPod classic®
8 GB, 32 GB, 64 GB
8 GB, 16 GB
32 GB, 64 GB
8 GB, 16 GB
*1 The selection works only when using an ARC compatible TV.
*2 “AUX”, “ARC” or “D-IN” works depending on the setting in “Setting the
audio link”.
8 GB, 16 GB, 32 GB
120 GB, 160 GB (2009)
8 GB, 16 GB
160 GB (2007)
8 GB, 16 GB, 32 GB
4 GB, 8 GB
Power off link
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
80 GB
iPod nano® 2nd generation (aluminum)
iPod® 5th generation (video)
iPod® 5th generation (video)
iPod nano® 1st generation
2 GB, 4 GB, 8 GB
60 GB, 80 GB
30 GB
Playing music continuously even after turning off the TV
(When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later.)
1 GB, 2 GB, 4 GB
16 GB, 32 GB
8 GB, 16 GB, 32 GB
8 GB, 16 GB
iPhone®
4
Select “Video” in “Power Off Link” (ꢀ 33)
iPhone® 3GS
iPhone® 3G
*
Playback functions on the main unit may be limited in the “All” mode.
Easy control only with VIERA
remote control
In some locations, reception status of an iPhone may be poor when it is
loaded on this unit.
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu,
etc.
≥ When the iPhone receives a call while connected to this unit, playback, etc.
of the iPhone may stop.
To prioritize the operation with the iPhone connected to this unit, make the
setting so that the iPhone does not receive calls.
≥ This works only during “BD/DVD” or “SD” playback and
resume modes.
iPod/iPhone Connection
Preparation
1 Press [SUB MENU].
≥ Before connecting/disconnecting the iPod/iPhone, turn the
main unit off or reduce the volume of the main unit to its
minimum.
≥ Make sure that the video cable connection is made to view
photos/videos from the iPod/iPhone.
e.g. BD-Video
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
1 Push the center of drawer (A), and pull out
fully until it clicks to open the Dock for
iPod/iPhone (C).
OK
SUB
MENU
RETURN
2 Install a Dock adapter (not supplied) (B)
before inserting your iPod/iPhone into the
dock.
2 Select an item, then press [OK].
≥ The sub menu may not appear while the Top Menu for
BD-Video or DVD-Video is displayed.
3 Connect the iPod/iPhone (not supplied)
firmly.
≥ The buttons that you can use for this unit can vary depending on the TV.
For details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
≥ Depending on the menu, some button operations cannot be performed
from the TV’s remote control.
VQT3M40
27
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone Playback
1
Preparation
≥ Make sure that the “IPOD” source is selected. Press [iPod] to
select the source.
≥ To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate
photo/video output settings for your TV.
≥ To display the picture, turn on the TV and select the
appropriate video input mode.
iPod/iPhone
Enjoy music/video
3
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select the
2
music menu or videos menu.
≥ You can also select "Videos" or "Music" by using HOME
menu. (ꢀ 18)
3 Press [3, 4] to select an item and press
[OK].
≥ Repeat this step until the selected title starts playback.
≥ Press [2, 1] to display the previous or next page.
e.g., music playback screen
Main unit
A
B
The center of drawer
Dock adapter (not supplied)
≥ Please be sure to use the adapter that is compatible
with your model of iPod/iPhone.
iPod
Good morning
Ronaldo
Happy days
1:00
-2:30
45 of 1230
≥ Attach the dock adapter until it is firmly in place.
≥ To purchase a dock adapter, consult your local iPod/
iPhone dealer.
C
D
Dock for iPod/iPhone
Make sure to match when inserting.
≥ Carefully insert and remove the iPod/iPhone to
ensure long lasting product enjoyment.
≥ Check that the connector has no dust or foreign
materials before connecting.
A
Album artwork
≥ If album artwork is contained in the data of a song, it
will appear on the TV. If there is no album artwork,
“
” will be appear on TV.
≥ Depending on the software version of your iPod/
iPhone, the album artwork may not appear properly.
≥ It may take time to read the album artwork.
≥ Some operations may not work while reading the
album artwork.
≥ The 3D logo on the Dock for iPod/iPhone does not mean that the iPod/
iPhone has 3D capabilities.
About recharging the battery
To exit, press [RETURN].
≥ iPod/iPhone will start recharging regardless of whether this unit is on or off.
≥ “IPOD ¢” will be shown on the main unit’s display during iPod/iPhone
charging in main unit standby mode.
Basic controls
(For music and video playback only)
≥ Once fully recharged, additional recharging will not occur.
Buttons
[1 PLAY]
[∫STOP]
Functions
Play
Pause
[;PAUSE]
[:, 9]
Skip
(Press and hold)
Search
[SEARCH6, SEARCH5]
VQT3M40
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Enjoying
Enjoy photos
VIERA CASTTM
1 Press [iPod] to select “IPOD”.
2 Press [STATUS] several times to select
You can access a selection of Internet services from the Home
screen with VIERA CAST, for example YouTube, Picasa Web
Albums. (Current as of December 2010)
“ALL” on the unit’s display.
≥ You can also select "All" by using HOME menu. (> 18)
3 Switch the TV input to video in.
Preparation
≥ Network connection (> 15)
≥ Network setting (> 17)
4 Play a slideshow on your iPod/iPhone.
The picture will be displayed on your TV.
To use the iPod touch/iPhone features
1
2
Press the Home button on the iPod touch/iPhone.
Select the iPod touch/iPhone features on the touch screen
to operate.
1 Press [VIERA CAST].
≥ NETFLIX can be accessed directly by [NETFLIX] button.
≥ Message is displayed. Please read these instructions
carefully and then press [OK].
You can use the remote control to operate the iPod/iPhone
menu.
The operation may vary among iPod/iPhone models.
≥ [3, 4]: To navigate menu items
2 Press [3, 4, 2, 1] to select the item and
press [OK].
Operable buttons:
≥ [OK]: To go to the next menu.
[3, 4, 2, 1], [OK], [RETURN], colored buttons, number
≥ [RETURN]: To return to the previous menu.
buttons
VIERA CAST Home screen;
Other methods of playback
Weather
New York, NY
NW 10
69°
mph
TOMORROW
H
L
76°
56°
1 Press [SUB MENU].
XXXXXX
XXXXXX
2 Press [3, 4] to select the item and press
Featured Photos
Featured Videos
XXXXXXXXXXX
[OK].
MORE
BACK
Playback Mode
Shuffle (For music playback only.)
Hit Movies
Top TV Shows
Watch Instantly
Songs:
Play all songs on iPod/iPhone in random order.
Albums:
Images are for illustration purposes, contents may change
without notice.
Play all songs on an album in random order.
Repeat
One:
To exit from VIERA CAST
Press [EXIT], [HOME] or [POP-UP MENU].
Play a single song/video repeatedly.
All:
Play all songs/videos from selected items (e.g., Playlists,
Albums, etc.) repeatedly.
≥ When playing content from a disc/SD card VIERA CAST cannot be
accessed by pressing [VIERA CAST].
iPod Information
Display the firmware version of iPod/iPhone.
≥ In the following cases, settings are possible using “Internet Content
Settings” (> 34)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly.
A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
3 Press [3, 4] to select the setting and press
[OK].
≥ Be sure to update the firmware when a firmware update notice is displayed
on the screen. If the firmware is not updated, you will not be able to use the
VIERA CAST function. (> 17)
≥ The setting of the playback mode will be kept until changes are made on
the same iPod/iPhone.
≥ This function does not work when “All” is selected.
≥ Surround sound effect and sound mode are available (> 19).
≥ VIERA CASTTM home screen is subject to change without notice.
≥ The services through VIERA CASTTM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be
presented in specific languages.
VQT3M40
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback menu
Play
1 Press [DISPLAY].
Repeat Play
e.g., BD-Video
(Only when the elapsed time is being displayed on the unit’s
display.)
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
Disc
Play
Video
Audio
Signal Type
Off
Main
Angle
1ENG
Subtitle
-
-
Subtitle Style
Select “Off” to cancel.
Menus
Items
Settings
Random
2 Press [3, 4] to select the menu and press
Select whether or not to play random.
[1].
Pop-Out Level
3 Press [3, 4, 2, 1] to select the item and
[Only when “Full HD” is selected in “3D Type” (ꢀ 33).]
Pop-up position for the Playback menu or message screen etc.
can be adjusted during 3D playback.
press [1].
4 Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Video
Picture
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Select the picture quality mode during play.
Regarding Language: (ꢀ 40)
Advanced Setting
Disc
Chroma Process
The high-resolution processing of HDMI chroma signals
produces a high-resolution picture with rich picture quality.
Signal Type
The recording method of
original video appears.
Video
Detail Clarity
The picture is sharp and detailed.
Primary
Video
Select the type of audio or
language.
Soundtrack
Video
Super Resolution
Select on/off of images. The
recording method of original
video appears.
Pictures of normal image quality are corrected to sharp and
detailed images when output as 1080i/1080p from HDMI AV
OUT.
Secondary
Video
Select on/off of audio and the
language.
Soundtrack
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
Video
≥ When the content is distorted change the settings from
“Auto” to “Video”.
The recording method of original video appears.
Soundtrack
24p
Show or change the soundtrack.
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
Subtitle
≥ Only when you have selected “On” in “24p Output” (ꢀ 33)
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(ꢀ 20, “Changing audio”)
Angle
Select the number of the angle.
VQT3M40
Some items may be changed only on the disc specific menu. (ꢀ 20)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup menu
Audio
Change the unit’s settings if necessary. The settings remain
intact even if you switch the unit to standby.
Movie Sound Effect
Select the sound effect of the movie.
≥ Cinema Surround Plus:
1 Press [HOME].
The function creates the sound of virtual speakers to
enhance the realistic surround feeling as if the sound comes
from all directions.
2 Press [3, 4, 2, 1] to select “Others” and
press [OK].
3 Press [OK] to select “Setup”.
Music Sound Effects*1, *2
Select the sound effect of the music.
≥ Digital Tube Sound:
This feature gives you warm sound, like that produced by a
vacuum tube amplifier.
Setup
Disc
Video
Audio
Display
≥ Re-master:
TV / Device Connection
Network
This feature gives you brighter sound by increasing the high
frequency portion of the audio. (Discs recorded at 48 kHz or
less)
Others
OK
RETURN
Recommended settings:
4 Press [3, 4] to select the menu and press
Re-master 1
Re-master 2
Re-master 3
Pop and rock
Jazz
[OK].
5 Press [3, 4] to select the item and press
[OK].
Classical
If there are any other items, repeat these steps.
High Clarity Sound
6 Press [3, 4, 2, 1] to select the option and
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” (> 32).
press [OK].
≥ There may be differences in operation methods. If this happens, follow the
on-screen instructions for the operation.
*1 When audio is output from the HDMI AV OUT terminal this function is
effective only when “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/
DTS-HD” is set to “PCM”. (> 32)
About the password
The following items use the same password.
Don’t forget your password.
≥ “DVD-Video Ratings”
*2 This function has no effect when the type of audio is Dolby Pro Logic II.
≥ “BD-Video Ratings”
≥ “Lock” (> 34)
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
shown.
3D BD-Video Playback
Select the playback method of 3D compatible video software.
Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of each disc
will be selected.
≥ Enter a code (> 40) with the number buttons when you
select “Other ¢¢¢¢”.
VQT3M40
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Subtitle Language
Choose the language for the subtitle.
Digital Audio Input
Press [OK] to show the following settings:
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that language
will automatically appear if available on that disc.
≥ Enter a code (> 40) with the number buttons when you
select “Other ¢¢¢¢”.
PCM-FIX
Select the following audio signal to input.
jARC
jDIGITAL IN
≥ “On”: PCM is available.
≥ “Off”: DTS, PCM and Dolby Digital are available.
Select “On” if the sound is cut off intermittently.
Menu Language
Choose the language for the disc menus.
≥ Enter a code (> 40) with the number buttons when you
select “Other ¢¢¢¢”.
Downmix
Select the downmix system to enjoy multi-channel or
2-channel sound.
BD-Live Internet Access (> 21)
≥ Select “Surround encoded” to enjoy the surround sound.
≥ There is no downmix effect on the bitstream audio signal.
≥ The audio will be output in “Stereo” in the following cases:
– AVCHD playback
You can restrict Internet access when BD-Live functions are used.
≥ If “Allow ( Limited )” is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
– Dolby TrueHD playback
– Playback of secondary audio (including the button click
sound).
Video
Still Mode (paused video)
High Clarity Sound
Select the type of picture shown when you pause playback.
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. (> 31)
Auto
Automatically selects the type of picture
shown.
Field
Frame
Select if jittering occurs when “Auto” is
selected.
Audio Delay
Select if small text or fine patterns cannot
be seen clearly when “Auto” is selected.
Mis-sync between the video and audio is corrected by delaying
the audio output.
Speaker
Refer to page 35
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the
chapters segment in playlists.
Display
Status Messages
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Audio
Dynamic Range Compression
Screen Saver Function
This is to prevent burn-in on the screen.
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
≥ When this is set to “On”:
If there is no operation for 5 minutes or more, DIRECT
NAVIGATOR screen switches to HOME menu automatically.
≥ While playing and pausing, etc., this function is not available.
≥ While playing music (CD-DA or MP3), after about 5 minutes
DIRECT NAVIGATOR screen switches to a blank screen
with “Screen Saver” message.
Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Front Panel Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected, the display is dimmed but brightens
when you perform some operations.
Select the audio signal to output
.
≥ Select “PCM”, when the connected equipment cannot
decode the respective audio format.
≥ Not making the proper settings may result in noise.
License
BD-Video Secondary Audio
Information about the software used by this unit is displayed.
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 21)
≥ If “Off” is selected, the unit outputs the primary audio
only.
VQT3M40
32
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Color Mode
This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
cable.
TV / Device Connection
3D Settings
Press [OK] to show the following settings
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Audio will be output through the system's speakers when
"Off" is selected.
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when
“Checker board” or “Side by side” is selected.
VIERA Link
3D Playback Precautions
Set to use “HDAVI Control” function when connected with
an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI
Control”.
Set to display or hide the 3D viewing warning screen when
playing back the 3D compatible video software.
TV Aspect
Set to match the type of television connected.
Deep Color Output
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
When connected to a 4:3 aspect television and playing 16:9
ratio image:
4:3
The sides are cut off so
the picture fills the
Contents Type Flag
screen. When playing
BD-Video, video is output
as “4:3 Letterbox”.
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
4:3
Letterbox
Black bands appear at the
top and bottom of the
picture.
Power Off Link
Select the desired power off link setting of this unit for
VIERA Link operation (ꢀ27). (This works depending on
the settings of the connected VIERA Link “HDAVI Control”
compatible equipment.)
When connected to a 16:9 widescreen television and playing
4:3 ratio image:
Video/Audio:
When the TV is turned off, this unit will turn off
automatically.
Video:
16:9
Video is displayed as a 4:3 ratio image in
the center of the screen.
When the TV is turned off, this unit will turn off except
during the following conditions:
jCD or MP3 audio playback
HDMI Connection
Press [OK] to show the following settings:
jiPod/iPhone mode
jRadio mode
HDMI Resolution
j“AUX”,“ARC” or “D-IN” (DIGITAL IN) mode (non-selected
TV AUDIO setting for VIERA Link)
j“D-IN” (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
The items supported by the connected devices are
indicated on the screen as “¢”. When any item without “¢”
is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output
resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p,
you need to connect the unit directly to 1080p
compatible HDTV (High Definition Television). If this unit
is connected to an HDTV through other equipment, it
must also be 1080p compatible.
TV Audio Input
Select the TV audio input to work with the VIERA Link
operations.
24p Output
When this unit is connected to a TV supporting 1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set
“24p” in “Video” (ꢀ30) to “On”.
≥ When BD-Video images other than 24p are played,
images are output at 60p.
≥ 24p :
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
VQT3M40
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Network
Others
Network Easy Setting (ꢀ 17)
Remote Control Code
Change the remote control code, when other Panasonic
products react to this remote control.
Network Settings
Perform network-related settings individually.
Quick Start*
Press [OK] to show the following settings:
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so
contents of the following will be different from the time it is
set to “Off”.
– Idle power consumption will increase. (More about the
power consumption ꢀ 42)
IP Address / DNS Settings
This is for checking the state of the network connection
and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
* Depending on the power conserving setting activated on
the TV, this function may have less effect when the unit is
started by the power on link function. (ꢀ 26)
Proxy Server Settings
This is for checking the state of connection with the Proxy
server and performing settings.
Press [OK] to show the respective setting.
Easy setup (ꢀ 16)
You can execute basic settings to optimize your home theater
system.
Internet Content Settings (ꢀ 29) (VIERA CAST)
Press [OK] to show the following settings:
Restore Default Settings
This returns all values in the Setup menu and the Playback
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address / DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” etc. to the default settings.
Lock
You can restrict the usage of VIERA CAST.
≥Follow the on-screen instructions. Enter the 4-digit
password with the number buttons when the password
screen is shown.
Audio Auto Gain Control
System Information
Volume that is different depending on the contents is
adjusted automatically to the standard volume while
using the VIERA CAST.
≥Depending on contents, this function effect will not
work.
Display firmware version of this unit.
Firmware Update (ꢀ 17)
Press [OK] to show the following settings:
≥Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s
time to match your location.
≥Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Automatic Update Check
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned
on and you can update it if necessary.
Update Now
You can update the firmware manually.
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
VQT3M40
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting speaker level
Speaker settings
Delay time
dB
0
Volume (Channel balance) (
)
For optimum listening with 5.1-channel sound, all the
speakers, except for the subwoofer, should be the same
distance from the seating position.
(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].
If either distance A or B is less than C, find the difference in
the relevant table and adjust the delay time to make up for the
difference.
A test signal is output.
2
While listening to the test signal
Press [3, 4] to adjust the volume of each
A
B
C
C
:
:
speaker.
L
R
The volume can be adjusted between r6 dB to s6 dB.
≥ Set each speaker level according to the volume of the
Front (L) and Front (R) speaker volume respectively.
A
C
C
SW
B
D
LS
RS
RS
3 Press [OK].
LS
The test signal stops.
A B C: Primary listening distance
e.g., 5.1ch setting
A
B
C
D
Approximate room dimensions
Actual speaker position
Ideal speaker position
Circle of constant primary listening distance
ms
d0B
C
L
0.0
R
1 Press [3, 4, 2, 1] to select the distance
Complete
Test
d0B
d0B
ms
0.0
box ( ) and press [OK].
SW
d0B
ms
0.0
e.g., 5.1ch setting
LS
RS
ms
d0B
C
L
0.0
R
Complete
Test
d0B
d0B
SW
A
B
C
Center (C)
Test
Left Surround (LS), Right Surround (RS)
d0B
ms
0.0
LS
RS
To finish the speaker setting
Press [3, 4, 2, 1] to select “Complete” and press [OK].
A
B
Center (C)
Left Surround (LS), Right Surround (RS)
2 Press [3, 4] to select the setting and press
[OK].
Center speaker
A
Difference
Setting
1.0 ms
2.0 ms
3.0 ms
4.0 ms
5.0 ms
Approx. 34 cm (1 ft. 1 in.)
Approx. 68 cm (2 ft. 2 in.)
Approx. 102 cm (3 ft. 4 in.)
Approx. 136 cm (4 ft. 5 in.)
Approx. 170 cm (5 ft. 6 in.)
B
Surround speaker
Difference
Setting
5.0 ms
Approx. 170 cm (5 ft. 6 in.)
Approx. 340 cm (11 ft. 1 in.)
Approx. 510 cm (16 ft. 8 in.)
10.0 ms
15.0 ms
VQT3M40
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional speaker settings
Reference
Speaker installation
option
Troubleshooting guide
Before requesting service, please perform the
following steps.
Attaching to a wall
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies. (ꢀ 17)
4
You can attach all of the speakers (except subwoofer) to a wall.
≥ The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg (22 lbs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
Make the following checks and visit our
website for more information.
Enter the model number.
≥ Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
4
Or visit our website to find a service
1 Drive a screw (not supplied) into the wall.
center.
A
B
C
At least 30 mm (1 3/16q)
‰ 4.0 mm (5/32q)
‰ 7.0 mm to ‰ 9.4 mm
(9/32q to 3/8q)
You can find a service center near you easily on our website.
Other support information:
“Customer Services Directory (United States and Puerto
Rico)” (ꢀ 43)
D
E
Wall or pillar
5.5 mm to 7.5 mm
(7/32q to 5/16q)
The following do not indicate a problem with this unit:
jRegular disc rotating sounds.
jImage disturbance during search.
jImage disturbance when replacing 3D discs.
2 Fit the speaker securely onto the screw(s)
with the hole(s).
∫ Unit does not respond to the remote
e.g., Front speaker
control or front panel buttons.
Press and hold [POWER Í/I] on the main unit for 5 seconds.
jIf still unable to power the unit off, disconnect the power cord,
wait 1 minute, then reconnect the power cord.
DO NOT
DO
∫ Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [9] on the remote
control and [< OPEN/CLOSE] on the unit at the same time for
more than 5 seconds.
≥ In this position, the
speaker will likely fall if
moved to the left or right.
≥ Move the speaker so that
the screw is in this
position.
Use the measurements indicated below to identify the
screwing positions on the wall.
≥ Leave at least 20 mm (25/32q) of space above the speaker and
10 mm (13/32q) on each side to allow enough space for fitting
the speaker.
General operation
To return to the factory preset
≥ Select “Yes” in “Restore Default Settings” in the Setup menu.
(ꢀ 34)
Front speaker,
Surround speaker
F
G
H
40 mm (1 9/16q)
17.6 mm (11/16q)
98.7 mm (3 7/8q)
To return all settings to the factory preset
≥ Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [< OPEN/
CLOSE] and [POWER Í/I] on the main unit at the same
time for more than 5 seconds.
Center speaker
The remote control doesn’t work properly.
I
J
23 mm (29/32q)
≥ Change the batteries in the remote control. (ꢀ 9)
≥ The remote control and main unit are using different codes. If
“SET ” is displayed on the unit’s display when a button is
pressed on the remote control, change the code on the
remote control. (ꢀ 34)
95 mm to 97 mm
(3 3/4q to 3 13/16q)
26 mm (1 1/32q)
16.7 mm (21/32q)
63.7 mm (2 1/2q)
K
L
M
Disc cannot be played.
≥ The disc is dirty. (ꢀ 9)
≥ Check the region code.
VQT3M40
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Still pictures (JPEG) do not playback normally.
≥ The images that were edited on the PC, such as Progressive
JPEG, etc., may not playback.
TV screen and video
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
≥ An incorrect resolution is selected in “HDMI Resolution”.
Reset the setting as follows:
The TV tuner mode is not displayed when the TV is
switched on.
≥ This phenomenon may occur, depending on the TV setting,
when “Quick Start” is set to “On”.
≥ Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
1
2
3
While the unit is on, press and hold [OK], [B] and [Y] on the
remote control at the same time for more than 5 seconds.
j“00 RET” is displayed on the unit’s display.
Repeatedly press [1] (right) on the remote control or
You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory preset.
[POWER /I] on the unit until “04 PRG” is displayed on the
Í
unit’s display.
Press and hold [OK] on the remote control or [< OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (> 33)
1
2
3
While the unit is on, press and hold [OK], [B] and [Y] on the
remote control at the same time for more than 5 seconds.
j“00 RET” is displayed on the unit’s display.
jWhen Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstream, select “Yes” in “Restore
Default Settings” and make proper settings. (> 34)
≥ When “3D BD-Video Playback” in the Setup menu is set to
“Automatic”, images may not be output depending on the
connection method. After removing the disc from this unit,
select “Set before play” in the Setup menu, and select “2D
Playback” in the setup screen displayed when playing 3D
discs. (> 31)
Repeatedly press [1] (right) on the remote control or
[POWER /I] on the unit until “03 VL” is displayed on the
Í
unit’s display.
Press [OK] on the remote control or [< OPEN/CLOSE] on
the unit.
Power
No power.
Video is not output.
≥ Insert the AC power supply cord securely into a household
≥ Set “High Clarity Sound” in the Playback menu to “Off” to use
the VIDEO OUT terminal. (> 31)
AC outlet. (> 15)
The unit switches to standby mode.
≥ This unit will automatically turn to standby mode after 30
minutes if it is inactive. (> 7)
≥ When the time set for the sleep timer has passed, the power
will be turned off. (> 6)
≥ One of the unit’s safety devices is activated. Press
[POWER Í/I] on the main unit to turn the unit on.
Video is not output in high-definition.
≥ Confirm that “HDMI Resolution” in the Setup menu is set
properly. (> 33)
3D video is not output.
≥ Are the settings on this unit and the TV correct? (> 22)
3D video is not output correctly as 2D.
This unit is turned off when the input for the TV is
switched.
≥ Select “Set before play” in the Setup menu, and select “2D
Playback” in the setup screen displayed when playing 3D
discs. (> 31)
≥ Discs that have recorded titles with Side by side (2 screen
structure) and that can be enjoyed in 3D are played back in
accordance with the settings of the TV.
≥ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
The unit does not turn off.
1
2
Press and hold [POWER
Í/I] on the main unit for 5 seconds.
No subtitles.
(If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.)
Reset the unit as follows:
≥ When progressive output is on, closed captions/subtitles
cannot be displayed.
While the unit is off, press and hold [+ VOLUME],
[< OPEN/CLOSE] and [POWER Í/I] on the main unit at
the same time for more than 5 seconds.
The subtitles overlap closed captions recorded on discs.
≥ Turn off the subtitles or turn off the closed caption setting on
the TV. (> 30)
Displays
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
The display is dim.
≥ Change “Front Panel Display” in the Setup menu. (> 32)
≥ Confirm the “TV Aspect” is set properly. (> 33)
≥ Adjust the aspect setting on the television.
VQT3M40
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Radio
No sound.
Low volume.
Distorted sound.
Distorted sound or noise is heard.
≥ Adjust the position of the antenna.
≥ Use an outdoor antenna. (ꢀ11)
Cannot hear the desired audio type.
≥ Check connections to speakers and other equipment.
(ꢀ10s15)
A beat sound is heard.
≥ Try to keep a certain amount of distance between the
antenna and the TV.
≥
≥
Ensure the speaker settings for your speakers are correct. (
To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. ( 33)
ꢀ35)
ꢀ
Network
≥ When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
≥ Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (ꢀ31)
I can’t connect to the network.
≥ Confirm the network connection and settings. (ꢀ15, 17, 34)
≥ Check the operating instructions for each device and
connect accordingly.
≥ Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
≥ The multi-channel audio from a device connected to the TV
is not output in it’s original multi-channel form.
Other difficulties with playback
BD-Video or DVD-Video is not played.
jIf the device has an optical audio output terminal, connect
the device to this unit’s “OPTICAL” terminal. (ꢀ14, 25)
≥ Ensure the disc is for the correct BD-Video region code or
DVD-Video region number, and is not defective. (ꢀ8)
≥ You have set a ratings level to limit BD-Video or DVD-Video
play. Change this setting. (ꢀ31)
No surround sound.
≥ Press [SURROUND] to select a surround effect. (ꢀ19)
≥ Some BD-Video can only be output with HDMI.
Cannot switch audio.
I cannot play back BD-Live.
≥ When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to
“PCM”. (ꢀ32)
≥ The SD card is write-protected. (ꢀ9)
≥ Confirm that this unit is connected to the broadband Internet.
(ꢀ15)
≥ Confirm the “BD-Live Internet Access” settings. (ꢀ32)
≥ Confirm an SD Card is inserted into the SD Card slot. (ꢀ18)
No sound from the TV.
≥ Press [EXT-IN] to select the corresponding source. (ꢀ18)
≥
When connecting the unit to a TV using an HDMI cable, check
whether the HDMI terminal on the TV is labeled “HDMI (ARC)”.
If not labeled in this way, connect using the HDMI cable in
Alternative soundtrack and subtitles cannot be selected.
≥ The languages are not recorded on the disc.
≥ You may not be able to use the playback menu to change the
soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (ꢀ20)
combination with an optical digital audio cable.(
ꢀ12, 13)
≥ If there is no sound from the equipment connected to this
unit’s DIGITAL AUDIO IN terminal, please make sure that
the optical audio output of the equipment is set to PCM.
Angle cannot be changed.
≥ Angles can only be changed during scenes where different
angles are recorded.
iPod/iPhone operation
Cannot charge or operate.
≥ Check that the iPod/iPhone is connected firmly. (ꢀ27)
≥ The battery of the iPod/iPhone is depleted. Charge the iPod/
iPhone, and then operate again.
≥ When unexpected operation occurs while using the
iPod/iPhone, connect the iPod/iPhone again or try to restart
the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on the TV.
≥ Make sure that TV is connected to the VIDEO OUT terminal
on this unit. (ꢀ12)
≥ Operate the iPod/iPhone menu to make the appropriate
video/photo output settings for your TV. (Refer to operating
instructions for your iPod/iPhone.)
The TV input channel unintentionally changes to HDMI input.
≥ When the main unit is connected with an “HDAVI Control”
compatible TV and VIDEO IN is selected for iPod/iPhone
video or photo playback, the TV input channel will
automatically change to the HDMI input channel when
[HOME] is pressed.
jRe-select the TV’s VIDEO IN input channel.
VQT3M40
38
Download from Www.Somanuals.com. All Manuals Search And Download.
No PLAY
Messages
The following messages or service numbers appear on the
television or unit’s display when something unusual is detected
during startup and use.
≥ There is a viewing restriction on a BD-Video or DVD-Video.
(> 31)
No READ
≥ The media is dirty or badly scratched. The unit cannot play.
On the television
Cannot play.
≥ You inserted an incompatible disc. (Discs recorded in PAL
video, etc.)
PLEASE WAIT
≥ The unit is carrying out an internal process.This is not a
malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
SET
Cannot display on this unit.
≥ You tried to play a non-compatible image.
(“ ” stands for a number.)
≥ The remote control and main unit are using different codes.
Change the code on the remote control.
No disc is inserted.
Press and hold [OK] and the indicated
number button at the same time for
more than 5 seconds.
≥ The disc may be upside down.
$ This operation is not available.
≥ Some operations are unsupported by the unit. For example;
jBD-Video: During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
H or F
(“ ” stands for a number.)
≥ Check and correct the speaker cable connections.
≥ There is something unusual.
IP address is not set.
≥ Check the unit using the troubleshooting guide. If the service
number does not disappear, do the following.
≥ The “IP Address” in “IP Address / DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address acquisition if
necessary.)
1
Disconnect the plug from the household AC outlet, wait a
few seconds, then reconnect it.
2
Press [POWER Í/I] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
No Video
≥ Depending on the connected iPod/iPhone, video menu may
not be available on the TV. Select “ALL” on the unit’s display
and operate video playback from your iPod/iPhone menu.
(> 29)
UPD/
(“ ” stands for a number.)
≥ The firmware is being updated. Please do not turn off power.
On the unit’s display
IPOD OVER CURRENT ERROR
F99
≥ The iPod/iPhone is drawing too much power. Remove the
iPod/iPhone, and turn the unit off and on again.
≥ The unit fails to operate properly. Press [POWER Í/I] on the
main unit to switch the unit to standby for 3 seconds. Now
press [POWER Í/I] on the main unit again to turn the unit
on.
START
≥ The system is being restarted during the firmware update.
Please do not turn off power.
U59
≥ The unit is hot.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the ventilation hole on the rear and side of
the unit.
FINISH
≥ The firmware update is completed.
NOT CONDITIONAL
≥ The requested operation cannot be conducted.
HDMI ONLY
≥ Some BD-Video discs can only be output with HDMI.
NET
≥ While connecting to a network.
VQT3M40
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplemental
information
File format
File
Extension
Reference
format
∫ Display languages list
“.MP3”,
“.mp3“
ID3 tags (Only titles and the names
of artists)
MP3
Display Language Display Language Display Language
“.JPG”,
“.jpg“
≥ MOTION JPEG and Progressive
JPEG is not supported
≥ You may not be able to play back
the file if you have edited the
folder structure or the file name
on a PC or other device.
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
JPN
CHI
Japanese
Chinese
Korean
Malay
ARA
HIN
Arabic
Hindi
German
Italian
KOR
MAL
VIE
PER
IND
Persian
Indonesian
Maori
JPEG
Spanish
Dutch
Vietnamese
Thai
MRI
BUL
RUM
GRE
TUR
THA
POL
CES
SLK
HUN
FIN
Bulgarian
Romanian
Greek
Swedish
Norwegian
Danish
Polish
Czech
Slovak
Turkish
Others
≥ With certain recording states and folder structures, the play
order may differ or playback may not be possible.
Portuguese
Russian
Hungarian
Finnish
∫ Language code list
Language
Code
Language
Code
Language
Code
Abkhazian
Afar:
6566 Gujarati:
6565 Hausa:
6570 Hebrew:
8381 Hindi:
7185 Rhaeto-Romance:
7265
8277
Afrikaans:
Albanian:
7387 Romanian:
7273 Russian:
7285 Samoan:
7383 Sanskrit:
8279
8285
8377
8365
Amharic
Arabic:
:
6577 Hungarian:
6582 Icelandic:
7289 Indonesian:
6583 Interlingua:
6589 Irish:
Armenian:
Assamese:
Aymara:
7378 Scots Gaelic: 7168
7365 Serbian:
8382
7165 Serbo-Croatian: 8372
Azerbaijani:
Bashkir:
6590 Italian:
7384 Shona:
7465 Sindhi:
8378
8368
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
6665 Japanese:
6985 Javanese:
Kannada:
Basque:
7487 Singhalese:
7578 Slovak:
7583 Slovenian:
7575 Somali:
7589 Spanish:
7579 Sundanese:
7585 Swahili:
7679 Swedish:
7665 Tagalog:
Bengali; Bangla:
6678 Kashmiri:
6890 Kazakh:
6672 Kirghiz:
6682 Korean:
6671 Kurdish:
7789 Laotian:
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
Byelorussian: 6669 Latin:
Cambodian:
Catalan:
Chinese:
Corsican:
Croatian:
Czech:
7577 Latvian, Lettish: 7686 Tajik:
6765 Lingala:
9072 Lithuanian:
6779 Macedonian:
7282 Malagasy:
6783 Malay:
6865 Malayalam:
7876 Maltese:
6978 Maori:
6979 Marathi:
6984 Moldavian:
7079 Mongolian:
7074 Nauru:
7678 Tamil:
7684 Tatar:
7775 Telugu:
7771 Thai:
7783 Tibetan:
7776 Tigrinya:
7784 Tonga:
7773 Turkish:
7782 Turkmen:
7779 Twi:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
7778 Ukrainian:
7865 Urdu:
7073 Nepali:
7082 Norwegian:
7089 Oriya:
7869 Uzbek:
7879 Vietnamese:
7982 Volapük:
7176 Pashto, Pushto: 8083 Welsh:
7565 Persian:
6869 Polish:
6976 Portuguese:
7576 Punjabi:
7178 Quechua:
7065 Wolof:
8076 Xhosa:
8084 Yiddish:
8065 Yoruba:
8185 Zulu:
VQT3M40
40
Download from Www.Somanuals.com. All Manuals Search And Download.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may
affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks
of Apple Inc., registered in the U.S. and other countries.
For the software categorized as (5) includes as follows.
1. This product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit.
(http://www.openssl.org/)
2. This product includes software developed by the University of
California, Berkeley and its contributors.
3. FreeType code.
4. The Independent JPEG Group's JPEG software.
gSOAP Public License 1.3
Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van
Engelen, Genivia inc. All Rights Reserved.
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY
GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
VQT3M40
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CENTER SPEAKER
SB-HC270
Type:
Specifications
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
3 ≠
79 dB/W (1 m)
90 Hz to 25 kHz (j16 dB),
115 Hz to 22 kHz (j10 dB)
Full range:
Impedance:
Output sound pressure:
Frequency range:
GENERAL
Power consumption:
85 W
Dimensions (WkHkD):
145 mmk81 mmk70.5 mm
Power consumption
in standby mode:
(523/32qk33/16qk215/16q)
Approx. 0.4 W
Mass (Weight):
Approx. 0.5 kg (1.1 lbs)
Power supply:
AC 120 V, 60 Hz
SURROUND SPEAKERS
SB-HS270
Type:
Full range:
Impedance:
iPod/iPhone Connector:
Dimensions (WkHkD):
DC OUT 5 V 1.0 A MAX
430 mmk38 mmk279 mm
(1615/16qk11/2qk1031/32q)
Approx. 2.7 kg (6 lbs)
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
3 ≠
Mass (Weight):
(Dimensions and Weight do not
include speakers)
Output sound pressure:
Frequency range:
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
80 mmk117 mmk70.5 mm
(35/32qk419/32qk215/16q)
Approx. 0.35 kg (0.77 lbs)
Operating temperature range:
Operating humidity range:
0 oC to 40 oC
(32 oF to 104 oF)
Dimensions (WkHkD):
35 % to 80 % RH
(no condensation)
Mass (Weight):
SUBWOOFER
SB-HW270
AMPLIFIER SECTION
Type:
Woofer:
Impedance:
Output sound pressure:
Frequency range:
1 WAY 1 SPEAKER Bass- ref.
16 cm (61/2q) CONE TYPE
3 ≠
78 dB/W (1 m)
40 Hz to 220 Hz (j16 dB),
RMS TTL POWER OUTPUT:
1 kHz, 10 % total harmonic distortion
1000 W
FRONT:
CENTER:
SURROUND:
100 Hz, 10 % total harmonic distortion
SUBWOOFER:
160 W per ch (3 ≠)
160 W per ch (3 ≠)
160 W per ch (3 ≠)
45 Hz to 180 Hz (j10 dB)
Dimensions (WkHkD):
145 mmk289.5 mmk258 mm
(523/32qk1113/32qk105/32q)
Approx. 2.8 kg (6.2 lbs)
200 W per ch (3 ≠)
430 W
Mass (Weight):
FTC TTL POWER OUTPUT:
120 Hz to 20 kHz, 1.0 % total harmonic distortion
FRONT:
CENTER:
SURROUND:
45 Hz to 120 Hz, 1.0 % total harmonic distortion
SUBWOOFER:
60 W per ch (3 ≠)
90 W per ch (3 ≠)
60 W per ch (3 ≠)
TERMINAL SECTION
Ethernet:
10BASE-T/100BASE-TX 1 system
Connector: 1 system
SD card slot:
100 W (3 ≠)
Audio Input
AUX:
k 1
VIDEO SECTION
Digital Audio Input
Optical:
Sampling frequency:
Audio Format:
Signal system:
Video output
NTSC
k 1
32 kHz, 44.1 kHz, 48 kHz
PCM, Dolby Digital, DTS
Output level:
1.0 Vp-p (75 ≠)
Output connector:
HDMI AV output
Output format:
Output connector:
Pin jack (1 system)
1080p/1080i/720p/480p
Type A (19 pin)
FM TUNER SECTION
This unit supports “HDAVI Control
5” function.
Frequency range:
87.9 MHz to 107.9 MHz (200 kHz step),
87.5 MHz to 108.0 MHz (100 kHz step)
75 ≠ (unbalanced)
LASER Specification:
Class I LASER Product
Wave length:
Antenna terminals:
790 nm (CDs)/655 nm (DVDs)/
405 nm (BDs)
Laser power:
No hazardous radiation is emitted
with the safety protection
SPEAKER SECTION
FRONT SPEAKERS
SB-HF270
Type:
Full range:
Impedance:
Specifications are subject to change without notice.
1 WAY 1 SPEAKER Bass-ref.
6.5 cm (21/2q) CONE TYPE
3 ≠
Output sound pressure:
Frequency range:
78 dB/W (1 m)
105 Hz to 25 kHz (j16 dB),
130 Hz to 22 kHz (j10 dB)
Dimensions (WkHkD):
80 mmk117 mmk70.5 mm
(35/32qk419/32qk215/16q)
Mass (Weight):
Approx. 0.35 kg (0.77 lbs)
VQT3M40
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company (referred
to as “the warrantor”) will, for the length of the period indicated on the
chart below, which starts with the date of original purchase (“warranty
period”), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to repair,
replace or refund will be made by the warrantor.
improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
Product or Part Name
Parts
Labor
Blu-ray Disc Player, Portable
Blu-ray Disc Player
1 year
90 days
Blu-ray Home Theater System
1 year
1 year
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
DVD Player, Portable DVD Player 1 year
90 days
90 days
DVD Recorder
1 year
Rechargeable Batteries (pack),
10 days
Not
Applicable
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you.
DVD-RAM Disc (defective exchange)
This warranty gives you specific legal rights and you may also have
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold “as is”.
other rights which vary from state to state. If a problem with this product
develops during or after the warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor’s Consumer Affairs Department
at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Customer Services Directory (United States and Puerto
Rico)
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase
Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
or, contact us via the web at:
When shipping the unit, carefully pack, include all accessories, and send it
prepaid, adequately insured and preferably in the original carton. If Lithium
Ion batteries are shipped by air the package must be labeled “Contains
Lithium Ion Battery (No lithium metal)”. Damaged batteries are prohibited
from shipment by US Mail. Batteries must be securely packed in a manner
to prevent short-circuiting and a package cannot contain more than 3
Lithium Ion batteries. Include a letter detailing the complaint, a return
address and provide a daytime phone number where you can be reached.
A valid registered receipt is required under the Limited Warranty.
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm,
Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY:
1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
Or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks)
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
User memo:
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
DATE OF PURCHASE _________________________
DEALER NAME ______________________________
DEALER ADDRESS __________________________
___________________________________________
TELEPHONE NUMBER _______________________
MODEL NUMBER
SC-BTT268
VQT3M40
SERIAL NUMBER _____________________________
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Audio
L
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Language
R
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Re-master. . . . . . . . . . . . . . . . . . . . . . . 31
Restore Default Settings. . . . . . . . . . . 34
Resume play function . . . . . . . . . . . . . 20
Changing audio. . . . . . . . . . . . . . . . .20
Language . . . . . . . . . . . . . . . . . .30, 31
Audio . . . . . . . . . . . . . . . . . . . . . 30, 31
Menu . . . . . . . . . . . . . . . . . . . . . . . . 32
On-screen . . . . . . . . . . . . . . . . . . . . 32
Soundtrack. . . . . . . . . . . . . . . . . . . . 30
Subtitle. . . . . . . . . . . . . . . . . . . . 30, 32
B
BD-Live. . . . . . . . . . . . . . . . . . . . . . . . . .21
S
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . 30
C
Chapter. . . . . . . . . . . . . . . . . . . . . . . . . .21
V
VIERA CASTTM . . . . . . . . . . . . . . . . . . . 29
VIERA LinkTM “HDAVI ControlTM” . . . . 26
N
Network
F
File format . . . . . . . . . . . . . . . . . . . . . . .40
Firmware update . . . . . . . . . . . . . . . . . .17
Connection. . . . . . . . . . . . . . . . . . . . 15
Setting . . . . . . . . . . . . . . . . . . . . 17, 34
24p . . . . . . . . . . . . . . . . . . . . . . . . . 30, 33
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
I
iPod/iPhone . . . . . . . . . . . . . . . . . . . . . .27
P
Playlists. . . . . . . . . . . . . . . . . . . . . . . . . 21
Pop-up menu . . . . . . . . . . . . . . . . . . . . 20
Q
Quick Start . . . . . . . . . . . . . . . . . . . . . . 34
As an ENERGY STAR® Partner, Panasonic has determined that
this product meets the ENERGY STAR® guidelines for energy efficiency.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
Panasonic Corporation 2010
Printed in Malaysia
VQT3M40-1
F1210MH1120
Download from Www.Somanuals.com. All Manuals Search And Download.
|