Operating Instructions
AAC WMA MP3 CD Player/Receiver
Model: CQ-RX300W
WMA MP3 CD Player/Receiver
Model: CQ-RX200W/CQ-RX105W/
CQ-RX102W/CQ-RX101W
(CQ-RX300W)
(CQ-RX300W)
• Please read these instructions carefully before using this product and keep this manual for future reference.
Accessories
Q’ty
Q’ty
Installation kit (YEP0FZ5698)
Instruction kit \CQ-RX300W\ \CQ-RX200W\
Operating Instructions
1 set
Lock Cancel Plate
(English:
(Pуccкий: YGFM286062)
(ʑᄽ: YGFM286064)
YGFM286063)
Mounting Bolt (5 mm œ)
1 set
(한국어: YGFM286065)
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
Rubber Bushing
System Upgrade Guidebook
(YGFM262852)
1
1
Installation Instructions
(YGFM294420)
Q’ty
1
Mounting Collar
(YEFX0217263A)
Q’ty
Instruction kit \CQ-RX105W\
Operating Instructions
1 set
Trim Plate
(YGFC051023)
1
1
(English:
(ʑᄽ:
YGFM286063)
YGFM286064)
(한국어: YGFM286065)
Power Connector
(K1HY13YY0003)
Installation Instructions
(YGFM294420)
1
\CQ-RX300W\ \CQ-RX105W\
Remote Control Unit (includes a
battery)
(EUR7641010)
Q’ty
Instruction kit \CQ-RX102W\ \CQ-RX101W\
1
1
Operating Instructions
1 set
(English:
(Pуccкий: YGFM286062)
(ʑᄽ: YGFM286064)
YGFM286063)
Removable Face Plate Case
(YGFA134302)
Installation Instructions
1
(YGFM294420)
Notes:
• The number in parentheses underneath each accessory part
name is the part number for maintenance and service.
• Accessories and their part numbers are subject to modification
without prior notice due to improvements.
• Mounting Collar and Trim Plate are mounted on the main unit at
shipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 1 -
Caution
THIS PRODUCT IS A CLASS I LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 3 -
Features
Expansion Module (Hub Unit)
SQ (Sound Quality)
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You
can customize your settings for these and save them for instant recall.
SQ3 (3-Band Sound Quality)
\CQ-RX300W\ \CQ-RX200W\
Connection of the Expansion Module (hub unit, CY-EM100N) allows
users to connect up to 4 optional devices shown below.
Center frequency and level are adjustable in each of 3 bands. This lets
you fine-tune sound quality for each genre to suit car-interior acoustics
and your personal preferences. (« “Sound Control”)
Wide Array of Components for System Upgrade
\CQ-RX300W\ \CQ-RX200W\
Various optional components allow users to obtain availability of wide
range of system upgrade. Upgrading the system delivers relaxed AV
space in a car. For further information, refer to the separate System
Upgrade Guidebook.
USB Connector
\CQ-RX300W\
The USB Connector is equipped on the front panel.
(« System Upgrade Guidebook)
• iPod
By connecting a USB memory (not included) to USB connector via a
USB extension cable (USB 2.0, not included), you can enjoy MP3/
WMA/AAC files stored on the USB memory (not included) in your car.
The optional adaptor (Direct Cable for iPod: CA-DC300N) allows
you to connect the optional iPod series.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
AUX (AUX1) Input Terminal
• CD Changer
The AUX input terminal is equipped on the front panel.
Your mobile audio player and other devices are connectable to this unit
without any difficulty.
The optional adaptor (Conversion Cable for DVD/CD Changer:
CA-CC30N) allows you to connect the optional Panasonic CD
changer unit (CX-DP880N).
• Bluetooth®
Using the optional Bluetooth Unit (CY-BT200N) and a Bluetooth
device enables hands-free telephony and Bluetooth Audio listening
with this unit.
Note: This unit does not support CY-BT100N.
Bluetooth®
The Bluetooth word mark and logo are owned by the Bluetooth SIG,
Inc. and any use of such marks by Matsushita Electric Industrial Co.,
Ltd. is under license. Other trademarks and trade name are those of
their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 4 -
Before Reading These Instructions
Panasonic welcomes you to our constantly growing family of electronic products owners.
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
\CQ-RX300W\ \CQ-RX200W\
The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit.
The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.
Differences Among 5 Models
This operating instruction manual is for 5 models CQ-RX300W, CQ-RX200W, CQ-RX105W, CQ-RX102W and CQ-RX101W. All illustrations
throughout this manual represent model CQ-RX300W unless otherwise specified. The following table describes the differences among 5 models.
Models
CQ-RX300W
Included
Included
CQ-RX200W
Not included
CQ-RX105W
Included
CQ-RX102W
Not included
CQ-RX101W
Not included
Features
Remote Control Unit
System Upgrade
Guidebook
Included
Not included
Not included
Not included
System-up Connector Supported
Supported
1 (Rear)
Not Supported
1 (Rear)
Not Supported
1 (Rear)
Not Supported
1 (Rear)
Preamp Out Connector 2 (Front/Rear)
USB Connector
AAC playback
Supported
Supported
Green
Not Supported
Not Supported
Green
Not Supported
Not Supported
Green
Not Supported
Not Supported
Green
Not Supported
Not Supported
Red
Button logo color
Download from Www.Somanuals.com. All Manuals Search And Download.
- 5 -
Maintenance/Fuse
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior
cleaning. Never use benzine, thinner, or other solvents.
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Service Center.
Warning
• Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit
directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest
authorized Panasonic Service Center.
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.
Notes:
• Do not touch the contacts on the face plate and the main
unit, since this may result in poor electrical contact.
• If dirt or other foreign substances get on the contacts, wipe
them off with a clean and dry cloth.
Removing
Mounting
Turn off the power.
Slide the left side of the face plate in place.
1
1
Press [ꢀ]. The face plate will open.
Pull it out toward you.
2
3
4
Press the right end of face plate until a
2“click” is heard.
Put the face plate in the case.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 6 -
Specifications
General
Disc Player
Power supply
:DC 12 V (11 V – 16 V DC), test
Sampling frequency
DA converter
:8 times oversampling
:1 bit DAC System
:Astigma 3-beam
:Semiconductor laser
:790 nm
:20 Hz – 20 kHz ( 1 dB)
:96 dB
:0.01 % (1 kHz)
:Below measurable limits
:85 dB
voltage 14.4 V, negative ground
:Less than 2.1 A
Current consumption
Maximum power output
Power output
Pick-up type
(CD mode; 0.5 W x 4 channels)
:50 W x 4 channels (at 1 kHz)
volume control maximum
:18 W x 4 CH (1 kHz, 1 %, 4 j)
Light source
Wave length
Frequency response
Signal to noise ratio
Total harmonic distortion
Wow and flutter
Channel separation
Tone/SQ adjustment range :SQ Low/Bass: 12 dB
(at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid: 12 dB
(at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: 12 dB
(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
:4 – 8 j
FM Radio
Frequency range
Usable sensitivity
Frequency response
Speaker impedance
Pre-amp output voltage
:2.0 V (CD mode, 1 kHz, 0 dB)
:87.50 MHz – 108.00 MHz
:6 dB/μV (S/N 30 dB)
:30 Hz – 15 kHz ( 3 dB)
Pre-amp output impedance :200 j
USB Connector \CQ-RX300W\
USB Standard Compatibility :1.1/2.0 Full Speed
Maximum Supply Current :500 mA
Front AUX input
Alternate channel selectivity :75 dB
Stereo separation
Image rejection ratio
IF rejection ratio
:35 dB (at 1 kHz)
:70 dB
:100 dB
:62 dB
Input impedance
Allowable external input :2.0 V
Connector
Dimensions (W x H x D)
Weight
:10 kj
Signal/noise ratio
:3.5 mm œ Stereo mini-pin
:178 x 50 x 160 mm
AM Radio
Frequency range
Usable sensitivity
:1.2 kg
:531 kHz – 1 602 kHz
:28 dB/μV (S/N 20 dB)
Notes:
• Specifications and design are subject to modification without
notice due to improvements.
• Some figures and illustrations in this manual may be different
from your product.
Notes:
(CA-RC80N)
• Remote Control Unit for CQ-RX200W/CQ-RX102W/CQ-RX101W
is option (CA-RC80N).
Mute/attenuation
• The optional remote control is available from your local dealer.
(CA-RC80N)
Power
Mode
Volume
(Source)
Tune
Track selection
Fast forward/fast reverse
Band
Pause
Matsushita Electric Industrial Co., Ltd.
YGFM286063A FT1007-1117 Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
- 7 -
RDo not install the product where it is exposed to strong
vibrations or is unstable.
Avoid slanted or strongly curved surfaces for installation. If the
installation is not stable, the unit may fall down while driving and
this can lead to an accident or injury.
RInstallation Angle
The product should be installed in a horizontal position with the
front end up at a convenient angle, but not more than 30˚.
The user should bear in mind that in some areas there may be
restrictions on how and where this unit must be installed. Consult
your dealer for further details.
RWear gloves for safety. Make sure that wiring is
completed before installation.
Caution
Observe the following cautions when using this
unit.
RKeep the sound volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic
conditions while driving.
RThis unit is designed for use exclusively in automobiles.
RDo not operate the unit for a prolonged period with the
engine turned off.
Operating the audio system for a long period of time with the
engine turned off will drain the battery.
RTo prevent damage to the unit, do not connect the power
connector until the whole wiring is completed.
RDo not connect more than one speaker to one set of
speaker leads. (except for connecting to a tweeter)
RDo not expose the unit to direct sunlight or excessive
heat.
Otherwise these will raise the interior temperature of the unit, and
it may lead to smoke, fire, or other damage to the unit.
RDo not use the product where it is exposed to water,
moisture, or dust.
Exposure of the unit to water, moisture, or dust may lead to
smoke, fire, or other damage to the unit. Make especially sure that
the unit does not get wet in car washes or on rainy days.
RSet the volume level to low enough before the AUX
connection is completed.
Failure to observe this, the loud noise may come out and damage
your speakers and your hearing. Direct connection of the speaker/
headphone output of an external device without any attenuator
may distort sound or damage the connected external device.
Observe the following cautions when handling the
battery for the remote control unit.
\CQ-RX300W\ \CQ-RX105W\
• Use only specified battery (CR2025).
• Match the polarity of the battery with the (+) and (–) marks in the
battery case.
• Replace a dead battery as soon as possible.
• Remove the battery from the remote control unit when not using it
for an extended period of time.
• Insulate the battery (by placing them in a plastic bag or covering
them with vinyl tape) before disposal or storage.
• Dispose of the battery according to the local regulations.
• Do not disassemble, recharge, heat or short the battery. Do not
throw a battery into a fire or water.
Observe the following cautions when installing.
RRefer wiring and installation to qualified service
personnel.
Installation of this unit requires special skills and experience. For
maximum safety, have it installed by your dealer. Panasonic is not
liable for any problems resulting from your own installation of the
unit.
RFollow the instructions to install and wire the product.
Not following the instructions to properly install and wire the
product could cause an accident or fire.
In case of battery leakage
• Thoroughly wipe the battery liquid off the battery case and insert
new battery.
• If any part of your body or clothing comes into contact with battery
liquid, wash it with plenty of water.
• If battery liquid comes into contact with your eyes, wash them with
plenty of water and get immediate medical attention.
RTake care not to damage the leads.
Observe the following cautions when using USB
When wiring, take care not to damage the leads. Prevent them
from getting caught in the vehicle chassis, screws, and moving
parts such as seat rails. Do not scratch, pull, bend or twist the
leads. Do not run them near heat sources or place heavy objects
on them. If leads must be run over sharp metal edges, protect the
leads by winding them with vinyl tape or similar protection.
RUse the designated parts and tools for installation.
Use the supplied or designated parts and appropriate tools to
install the product. The use of parts other than those supplied
or designated may result in internal damage to the unit. Faulty
installation may lead to an accident, a malfunction or fire.
RDo not block the air vent or the cooling plate of the unit.
Blocking these parts will cause the interior of the unit to overheat
and will result in fire or other damage.
device. \CQ-RX300W\
• Do not connect a USB device directly to this unit. If the USB device
is connected directly to this unit and an accident occurs, or if the
brakes are applied suddenly, the driver or passenger may bump
into the USB device and may get injured.
• Position the USB device and USB extension cable so that they do
not obstruct your driving.
• Do not connect any USB device other than USB memory or a
USB audio player. Do not connect multiple USB devices to the
USB connector. Drawing power for multiple USB devices from the
connector could cause overheating and smoking.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 8 -
Notes on Discs
If you use commercial CDs, they must have either of these labels shown at
right.
Some copy-protected music CDs are not playable.
How to hold the disc
Disc Insert
• Do not touch the underside of the disc.
• Do not scratch on the disc.
The surfaces of new discs tend to be slippery. Therefore,
when using such a disc for the first time, it may not load
satisfactorily even when it has been inserted into the unit. At
a time like this, insert the disc into the unit as far as it will go
until it is loaded properly.
• Do not bend the disc.
• When not in use, keep disc in the case.
Printed side
• When inserting a disc into or ejecting and removing it
from the unit, insert it straight in or eject and remove it
straight out in parallel with the unit.
Observe, the disc may be scratched or marked in the
process.
• When inserting a disc, do not put one disc on another.
Failure to observe this may cause the discs to be jammed.
Do not use discs that fit any of the descriptions given below.
Using these discs may damage the discs or cause the unit to
malfunction.
• Special discs in a shape which is not round
Do not leave discs in the following places:
• Direct sunlight
• Near car heaters
• Dirty, dusty and damp areas
• On seats and dashboards
• Partly or wholly transparent disc
Disc cleaning
• Use a dry, soft cloth to wipe from the center outward.
Wholly transparent disc
Partly transparent disc
Wholly semi-transparent disc may not be played back.
<Correct>
<Wrong>
• Discs with adhered labels, etc. on them
• Do not attach any seals or labels to your discs.
• Do not write on the disc label in a heavy pen or ballpoint
pen.
Disc with adhered stickers Labels created by a printer
or tape
Notes on CD-Rs/RWs
• You may have trouble playing back some CD-R/RW discs
recorded using CD recorders (CD-R/RW drives), either
due to their recording characteristics or dirt, fingerprints,
scratches, etc. on the disc surface.
• CD-R/RW discs are less resistant to high temperatures and
high humidity than ordinary music CD. Leaving them inside
a car for extended periods may damage and make playback
impossible.
Protective films or sheets
Discs accessories (stabilizers,
etc.)
• Damaged or deformed discs
• The unit may not successfully playback a CD-R/RW, that was
made by the combination of writing software, a CD recorder
(CD-R/RW drive) and a disc if they are incompatible with one
another.
• This player cannot play the CD-R/RW discs if the session is
not closed.
Shoddily made discs
Discs with cracks, scratches or
parts missing
• Be sure to observe the handling instructions of CD-R/RW
discs.
• This player cannot play CD-R/RW discs which contain other
than CD-DA or MP3/WMA/AAC data (Video CD, etc.).
Discs with burrs
Please remove the burrs
before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
Notes on MP3/WMA/AAC
extension and were encoded with Apple iTunes® version 7.
• The file extension for files encoded with the iTunes Apple
Lossless Encoder is “.m4a”, but such files cannot be played
on this player.
Playable Audio File
CQ-RX300W
CQ-RX200W
CQ-RX105W
CQ-RX102W
CQ-RX101W
MP3/WMA/AAC
MP3/WMA
MP3/WMA
MP3/WMA
MP3/WMA
• Files under copyright protection cannot be played.
Caution
Never assign the “.mp3”, “.wma” or “.m4a” file
name extension to a file that is not in the MP3/
WMA/AAC format.This may not only produce
noise from the speaker damage, but also damage
your hearing.
Notes for AAC playback is only for the model CQ-RX300W.
What is MP3/WMA/AAC?
MP3* (MPEG Audio Layer-3) and WMA (Windows MediaTM
Audio) are the compression formats of digital audio. The former
is developed by MPEG (Motion Picture Experts Group), and
the latter is developed by Microsoft Corporation. Using these
compression formats, you can record the contents of about
10 music CDs on a single CD media (This figures refer to data
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of
128 kbps and a sampling frequency of 44.1 kHz).
iTunes is a trademark of Apple Inc., registered in the U.S.
and other countries/regions.
Windows Media, and the
Windows logo are trademarks, or
registered trademarks of Microsoft
Corporation in the United States
and/or other countries/regions.
*MPEG Layer-3 audio coding technology licensed from
Fraunhofer.
AAC is an abbreviation for “Advanced Audio Coding”.
It has been defined as a standard for audio compression
technology using MPEG 2 and MPEG 4.
Note: MP3/WMA/AAC encoding and writing software is not
supplied with this unit.
Points to Remember When Making MP3/
WMA/AAC Files
Common
• High bit rate and high sampling frequency are recommended
for high quality sounds.
• Selecting VBR (Variable Bit Rate) is not recommended
because playing time is not displayed properly and sound
may be skipped.
• The playback sound quality differs depending on the
encoding circumstances. For details, refer to the instructions
of your own encoding software and writing software.
MP3
• It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.
WMA
• It is recommended to set the bit rate to “64 kbps or more”
and “fixed”.
• Do not set the copy protect attribute on the WMA file to
enable this unit to play back.
AAC
• It is recommended to set the bit rate to “128 kbps or more”
and “fixed”.
• The formats and extensions for AAC data vary according to
the encoder software used.
• AAC files which can be played on this unit have the “.m4a”
Download from Www.Somanuals.com. All Manuals Search And Download.
- 10 -
Display Information
Displayed items
Recording MP3/WMA/AAC Files on a CD-
Media/USB-Device
• You are recommended to minimize the chances of making
a disc that contains both CD-DA files and MP3/WMA/AAC
files.
• If CD-DA files are on the same disc as MP3, WMA or AAC
files or the songs may not play in the intended order, or
some songs may not play at all.
• CD-TEXT
Disc title
• MP3 (ID3 tag)
Album name
Track title
Title name/artist name
• WMA (WMA tag)
Album name
• MP3/WMA/AAC
Folder name
File name
Title name/artist name
• AAC (Song information)
Album name
Title name/artist name
• When storing MP3 data, WMA data or AAC data on the
same disc, use different folders for each data.
• Do not record files other than MP3/WMA/AAC files and
unnecessary folder on a disc.
• The name of an MP3/WMA/AAC file should be added by
rules as shown in the following descriptions and also comply
with the rules of each file system.
Displayable characters
• Displayable length of file name/folder name: within
32 characters. (Unicoded file and folder names are reduced
by half in the number of displayable characters.)
• Name files and folders in accordance with the standard of
each file system. Refer to the instructions of writing software
for details.
• The file extension “.mp3”, “.wma” or “.m4a” should be
assigned to each file depending on the file format.
•
You may encounter trouble in playing MP3/WMA/AAC files or
displaying the information of MP3/WMA/AAC files recorded
with certain writing software or CD recorders.
• ASCII character set and special characters in each language
can be displayed.
• Some Cyrillic characters in the Unicode can be displayed.
• This unit does not have a play list function.
• Although Multi-session recording is supported, the use of
Disc-at-Once is recommended.
ASCII character set
Supported file systems
A to Z, a to z, digits 0 to 9, and the following symbols:
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~
QCD-media
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,
Special Characters
À Á Â Ã Å à á â ã å
Ä ä
Ò Ó Ô Õ Ö ò ó ô õ ö
Ù Ú Û Ü ù ú û ü
Romeo
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not
supported.
QUSB-device \CQ-RX300W\
File system is FAT12/16/32
Notes:
• With some software in which MP3/WMA/AAC format files
have been encoded, the character information may not be
displayed properly.
• Undisplayable characters and symbols will be converted into
an asterisk ( ).
• It is recommended that the length of the file name is less
than 8 characters (excluding the file extension).
Compression formats
(Recommendation: “Points to Remember When Making MP3/WMA/AAC Files” «Left)
\CQ-RX300W\
Compression method
Bit rate
VBR
Yes
Yes
Yes
Yes
Yes
Sampling frequency
32, 44.1, 48 kHz
16, 22.05, 24 kHz
8, 11.025, 12 kHz
32, 44.1, 48 kHz
MPEG 1 Audio Layer-3 (MP3)
MPEG 2 Audio Layer-3 (MP3)
MPEG 2.5 Audio Layer-3 (MP3)
Windows Media Audio Ver. 2B9*
32 k – 320 kbps
8 k – 160 kbps
8 k – 160 kbps
64 k – 160 kbps
16 k – 320 kbps
MPEG 4 Advanced Audio Coding Low
Complexity (AAC LC)
8,11.025, 12, 16, 22.05, 24, 32, 44.1,
48 kHz
* WMA 9 Professional/LossLess/Voice are not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\
Compression method
Bit rate
VBR
Yes
Yes
Yes
Yes
Sampling frequency
32, 44.1, 48 kHz
16, 22.05, 24 kHz
8, 11.025, 12 kHz
32, 44.1, 48 kHz
MPEG 1 Audio Layer-3 (MP3)
MPEG 2 Audio Layer-3 (MP3)
MPEG 2.5 Audio Layer-3 (MP3)
Windows Media Audio Ver. 2B9*
32 k – 320 kbps
8 k – 160 kbps
8 k – 160 kbps
64 k – 160 kbps
* WMA 9 Professional/LossLess/Voice are not supported.
Folder Selection Order/File Playback Order
Maximum number of files/folders
• Maximum depth of trees: 8
\CQ-RX300W\
QCD-media
Root folder
(Root Directory)
1
• Maximum number of files
Folder Selection
2
CD-media: 999
USB device: 65 535
• Maximum number of files in one folder
CD-media: 999
In the order
1
8
4
File Selection
In the order
3
USB device: 999
5
6
• Maximum number of folders:
CD-media: 256 (Root folder is included.)
USB device: 255 (Root folder is included.)
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\
• Maximum number of files: 999
• Maximum number of files in one folder: 999
• Maximum number of folders: 256 (Root folder is included.)
8
7
Tree 1 Tree 2 Tree 3 Tree 4
Tree 8 (Max.)
Notes:
QUSB-device \CQ-RX300W\
• You can shorten the duration between data read and
playback by decreasing the quantity of files or folders, or
the depth of the hierarchy.
• This unit counts the number of folders irrespective of the
presence or absence of an MP3/WMA/AAC file.
• If the selected folder does not contain any MP3/WMA/AAC
files, the nearest MP3/WMA/AAC files in the order of
playback will be played.
Root folder
(Root Directory)
1
Folder Selection
In the order
1
5
2
4
File Selection
In the order
3
• Playback order may be different from other MP3/WMA/AAC
players even if the same disc is used.
• “ROOT” appears when displaying the root folder name.
\CQ-RX300W\
5
• Empty folders stored on the USB memory are not included
in the folder count.
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
Tree 8 (Max.)
• Depending on the connected USB memory, the order in
which the files are played back may differ to the order in
which the files were stored.
Copyright
No warranty
It is prohibited by copyright laws to copy, distribute and
deliver copyrighted materials such as music without the
approval of copyright holder except enjoying yourself
personally.
Above description complies with our investigations as of
September 2007. It has no warranty for reproducibility and
displayability of MP3/WMA/AAC.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 12 -
Preparation
Set your car’s ignition switch
Press [SRC] (PWR: Power).
C
O
C
A
1to the ACC or ON position.
2
N
\CQ-RX300W\ \CQ-RX200W\
The demonstration message appears for initial
use.
Press [VOL] (PUSH SEL: Select) to select
4DEMO.
Turn [VOL] counterclockwise.
5For using the remote control, press [0] (ꢁ).
Set your car’s ignition switch to the ACC or
1ON position.
Press [SRC] (PWR: Power).
2
Notes:
Hold down [VOL] (PUSH SEL: Select) for
• To return to the regular mode, press [DISP].
• Refer to the section on “Function Settings”.
• When “NO USB” (\CQ-RX300W\) or “NO DISC” is
displayed, the Demonstration cannot be cancelled.
32 sec. or more to open the function menu.
\CQ-RX300W\ \CQ-RX105W\
Pull the insulation film out from
the backside of the remote control
gently.
Note: Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included
in the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
The 24-hour system is used for the clock.
Adjust the minute.
5
Press [DISP].
1
Minute entered
(clock display)
Hold down [DISP] for more than
[ꢀ]: sets the minute ahead.
[ꢁ]: sets the minute back.
22 seconds.
Hour blinks
Press [DISP].
6
Completed
Adjust the hour.
3
Notes:
Hour entered
• “ADJUST” is displayed before adjusting the clock.
• Hold down [ꢁ] or [ꢀ] to change numbers rapidly.
• When “NO DISC” is displayed, the clock cannot be
adjusted.
[ꢀ]: sets the hour ahead.
[ꢁ]: sets the hour back.
Press [DISP].
Clock Display at Power Off
4
Press [DISP] to change the display.
Minute blinks
Display off
Clock display (Default)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 13 -
General
[SRC] (Source)
selects a source.
[PWR] (Power)
toggles power on/off.
Remote Control Sensor
[VOL] (Volume)
[SQ] (Sound Quality)
selects a sound type (SQ).
AUX1 Connector (3.5 mm
From line output of external sound/audio device (ex. Silicon-
audio player, HDD player, etc.)
œ
stereo)
Caution
• Set the volume level to low enough before the AUX
connection is completed.
Failure to observe this, the loud noise may come out
and damage your speakers and your hearing.
Power On/Off
Volume Adjustment
Set your car’s ignition switch to the ACC or ON position.
Power on: Press [SRC] (PWR).
Power off: Hold down [SRC] (PWR) for more
than 1 second.
(Setting Range: 0 to 40, Default: 18)
Turn [VOL].
Source Selection
Press [SRC] to change the source.
\CQ-RX300W\
QUSB Connector
\CQ-RX300W\
When an optional USB memory is connected:
When loading MP3/WMA/AAC data
Radio
Disc Player
When an optional USB memory is not connected:
System-up
Connector
AUX 1*
USB Connector
(«Below)
(«Right)
(«Continued below)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 14 -
Radio (AM/FM)
[SRC] (Source)
[TUNE ꢁ] [TUNE ꢀ]
selects a source.
down/up the frequency. (Hold it down for more than 0.5 seconds
and release it for seek tuning.)
[DISP] (Display)
switches the information on the
display.
[BAND]
selects a band in the radio source.
[APM] (Auto Preset Memory)
executes APM in the radio source. (Hold it
down for more than 2 seconds.)
Preset buttons [1] to [6]
selects a preset station in the radio source,
and presets the current station. (Hold it down for more than
2 seconds.)
Press [SRC] to select the radio source.
Frequency Adjustment
1
2
[TUNE ꢁ]: Lower
[TUNE ꢀ]: Higher
Press [BAND] to select a band.
Note: Hold down for 0.5 sec. or more and release for
station search.
Preset Station Selection
Press the corresponding preset button from
[1] to [6] to tune in a preset station.
Select a station.
3
Display Change
Band
Frequency
Preset Number
Press [DISP] to change the display.
Radio mode display
(Default)
Clock display
lights while receiving an FM stereo signal.
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [1] to [6].
Auto Preset Memory (APM)
Manual Station Preset
With this operation, stations with good receiving conditions
can be automatically stored in the preset memory.
Tune into a station.
1
Hold down one of the preset buttons from
Select a band.
2[1] to [6] for more than 2 seconds.
1
Hold down [BAND] (APM) for more than
22 seconds.
(blinks once)
The preset stations under best receiving conditions are received
for 5 seconds each after presetting the stations (SCAN). To stop
scanning, press one of the buttons from [1] to [6].
Note: New stations overwrite existing saved stations.
Note: New stations overwrite existing saved stations.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 15 -
Audio Settings
[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
Press [VOL] (PUSH SEL) to open the audio menu.
1Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,
10 seconds in the SQ adjustment), the display returns to the regular mode.
Press [VOL] (PUSH SEL) to select a mode to
Turn [VOL] clockwise or counterclockwise to
2be adjusted.
3adjust.
Volume
(Setting Range: 0 to 40, Default: 18)
ꢀ: Up
ꢁ: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)
ꢀ: Increased
ꢁ: Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)
ꢀ: Increased
ꢁ: Decreased
SQ Adjustment
ꢀ/ꢁ: center frequency up/down
[ꢁ] [ꢀ]: Band selection
[ꢂ] [ꢁ]: Level up/down
(Tone/SQ adjustable range : B12 dB to A12 dB (by 2 dB))
Setting range:
SQ Low/Bass:
SQ Mid:
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
Balance
(Setting Range: 15 levels each, Default: CNT (center))
ꢀ: Right enhanced
ꢁ: Left enhanced
Fader
(Setting Range: 15 levels each, Default: CNT (center))
ꢀ: Front enhanced
ꢁ: Rear enhanced
(«Continued below)
Download from Www.Somanuals.com. All Manuals Search And Download.
- 16 -
Sound Control
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,
CLUB). You can customize your settings for these and save
them for instant recall.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
SQ Changeover
ꢀPress [SQ] to activate the SQ selection mode.
ꢁPress [SQ] to select the sound type as follows.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
Press [DISP] to return to the regular mode.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
Notes:
• After pressing [SQ] on the main unit, you can also select a
sound type by pressing the preset buttons [1] to [6].
• Please refer to “Audio Settings” for the adjustment to each
speaker.
(VOCAL) clear sound:
emphasizes middle tone and slightly emphasizes treble.
(JAZZ) jazz-specific deep sound:
sound with emphasis on sharpness of high-hat and echo
saxophone.
(CLUB) club and disco-specific sound:
reproduction of realism being in a club.
You can adjust the characteristics of the currently selected
sound type (SQ). (« Above)
It is also possible to preset up to 5 different adjusted SQs.
Press [VOL] (PUSH SEL:
Select) to open the audio menu.
1
Press [VOL] (PUSH SEL: Select) to select
SQ SET.
2
SQ3 (3-Band Sound Quality)
Center frequency and level are adjustable in each of 3 bands.
This lets you fine-tune sound quality for each genre to suit
car-interior acoustics and your personal preferences.
Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)
Adjust each band.
3
ꢀ/ꢁ: center frequency up/down
[ꢁ] [ꢀ]: Band selection
[ꢂ] [ꢁ]: Level up/down
SQ Low/Bass:
SQ Mid:
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
Level
Frequency
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
• The bass/treble control level of each frequency is fixed to the
frequency that has been selected for SQ.
Hold down the numeric button [2] to [6] for
4
2 sec. or more.
To return an adjusted SQ to the default setting
ꢀPress [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
• The adjusted SQ is preset in the number of the selected
button, and return to the regular mode resumes.
ꢁHold down [BAND] for 2 sec. or more.
• When you suspend the SQ preset adjustment, each level
remains your recent adjustment until a new SQ presetting
operation is performed or you call up the SQ preset.
Notes:
• You cannot save any SQ presetting value in [1] button.
• Any SQ adjustments will not change the call up screen
names such as ROCK and JAZZ.
• Do not activate SQ and Bass/Treble at the same time to avoid
causing sound distortion.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 17 -
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
Warning
• Do not use the unit in an irregular condition, for example,
without sound, or with smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop using the unit and
consult your dealer.
• Never try to repair the unit by yourself because it is dangerous
to do so.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized Panasonic
Service Center. The product should be serviced only by qualified
personnel. Please refer the checking and the repair to professionals.
Panasonic shall not be liable for any accidents arising out of neglect
of checking the unit or your own repair after your checking.
Never take measures especially those other than
indicated by italic letters in “Possible Solution” described
below because those are too dangerous for users to
handle themselves.
Trouble
Possible Solution
Trouble
Possible Solution
Common
Radio
• Start the engine. (Or turn the ignition
switch to the ACC position.)
• Tune in to another station of high-intensity
waves.
• Make sure that the antenna mounted point
is grounded properly.
Frequent noise
•
•
Verify the wiring. (battery lead, power
lead, ground lead, etc.)
Fuse blown (Contact the nearest
Panasonic Service Center.)
No power
• The preset memory is cleared to return
to the original factory setting when
the power connector or battery is
disconnected.
Preset data
deleted
•
•
Ask a professional for fuse replacement.
Be sure to use the same rated fuse.
• Disable the mute function.
• Verify the wiring.
• Wait until the dew disappears before
Error Display Messages (Disc Player)
No sound
Noise
(The disc is ejected automatically.)
The disc is dirty or upside down.
• Check the disc.
turning on the unit.
• Make sure that grounding is established
properly.
(The disc is ejected automatically.)
The disc has scratches.
• Check the disc.
• Adjust the balance and fader.
• Verify the wiring.
No sound from
left, right, front,
or rear speaker
No operation by some cause.
• If normal operation is not restored,
consult your dealer or the nearest
Service Center to ask for repairs.
• Connect the speaker lead correctly.
Left and right
sounds are
reversed
Cannot read the file
• Check the disc.
Disc Player
A WMA/AAC file can be copyrighted.
• The file protected by copyright is not
playable.
• Load the disc correctly.
• Clean the disc.
No sound,
or disc is
automatically
ejected
\CQ-RX300W\ \CQ-RX200W\
Note: Refer to the System Upgrade Guidebook for error messages
regarding optional products.
• Clean the disc.
Sound skip,
poor sound
quality
• The maximum permissible tilt angle is
30°.
• Secure the unit.
Sound skip due
to vibration
• Press [ꢂ]. If the disc is still not ejected,
contact the nearest Panasonic Service
Center.
Disc not
ejectable
Download from Www.Somanuals.com. All Manuals Search And Download.
- 18 -
Remote Control Unit
\CQ-RX300W\ \CQ-RX105W\
Notes:
• This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
• Aim the remote control at the remote sensor and operate it.
[BAND] (SET)
[0] to [9]
selects a band in the tuner source, toggles pause/play in player source,
selects a preset station (1 to 6),
executes the APM (Auto Preset Memory) in tuner source
presets the current station (Hold it down for more than
(Hold it down for more than 2 seconds).
2 seconds.),
inputs the number in direct selection.
[#] (NUMBER)
[MENU] (SEL: Select)
selects the items in the audio menu.
[SRC] (SOURCE)
selects a source.
(POWER)
executes the direct selection.
[RANDOM] [SCAN] [REPEAT]
toggles on/off each play mode.
[ꢃ] [ꢄ]
down/up the frequency (Hold it down for more than
0.5 seconds and release it for seek tuning.)
toggles power on/off.
[VOL] (volume)
adjusts the volume, and selects the
value in the audio menu, etc.
[MUTE]
toggles mute on/off.
(Only for remote control unit)
Note: You can select mute or
attenuation. (« “Function Settings”)
[ꢁ] [ꢂ]
skip to the previous/next folder in player mode.
[ꢁ] [ꢀ]
skip to the previous/next track/file in player mode. Hold
it down for fast reverse/fast forward.
[DISP] (Display)
switches the information on display,
and exits the audio menu.
Direct Access
A track (CD mode), file, folder (MP3/WMA/AAC mode) can
be directly selected.
Example: Track number 5
ꢁ Put a battery in the
case with (+) side
facing up.
Press [#] (NUMBER).
1
ꢂ Put the case back.
Press [5].
2
Press [BAND] (SET).
3
Notes:
Warning
• To suspend direct selection, press [DISP].
• For folder selection, enter a number after pressing [#]
(NUMBER) twice.
Keep batteries and insulation film out of reach of infants.
Batteries and insulation film can be ingested, so keep
them out of the reach of infants. If an infant ingests a
battery or insulation film, please seek immediate medical
attention.
Functions only on Main unit
The following functions are not available on remote control
unit.
Caution
• SQ selection
• Disc eject
• Scroll
• Tag on/off
• Remove and dispose of an old battery immediately.
• Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
Battery Replacement
• Follow local regulations when disposing of a battery.
• Improper use of batteries may cause overheating, an
explosion or ignition, resulting in injury or a fire.
Tough pointed object
ꢀ
Remove the battery holder with
the remote control unit placed on
a flat surface.
Notes: Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included
in the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
ꢀ Stick your thumbnail into
the groove, and push the
holder in the direction of
the arrow, and at the same
time.
2
1
ꢁ Pull it out in the direction
of the arrow using a tough
pointed object.
Back side
Download from Www.Somanuals.com. All Manuals Search And Download.
- 19 -
\CQ-RX200W\
Radio
QSystem-up Connector
\CQ-RX300W\ \CQ-RX200W\
Disc Player
When an optional device is connected:
Shift to connected device
When connecting CD changer
System-up Connector
(«Right)
AUX 1*
When connecting iPod
When connecting Bluetooth Unit
\CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\
Radio
Disc Player
AUX*
OR
When an expansion module is connected:
The devices connected to the ports 1 to 4 are activated in
sequence after shifting to AUX2 (device connected to the
AUX terminal of the expansion module).
QAUX1 Connector
AUX IN*:
\CQ-RX300W\ \CQ-RX200W\
\CQ-RX300W\ \CQ-RX200W\
Note: For information about connectable devices, refer to
the System Upgrade Guidebook or the instruction manual
for each device.
\CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\
Note: The connector is labeled “AUX1”, but it appears on the
display as “<AUX IN>”.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 20 -
Function Settings
[VOL]
selects a value in the function menu.
(PUSH SEL) (Push to select)
selects items in the function menu.
[DISP] (Display)
exits from the function menu.
Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.
1Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.
Press [VOL] (PUSH SEL) to select a mode to
Turn [VOL] clockwise or counterclockwise to
2be adjusted.
3adjust.
ꢀ: On (Default)
Demonstration
\CQ-RX300W\ \CQ-RX200W\
You can set up the monitor to display or hide the
demonstration screen.
ꢁ: Off
Note: Button operation with either the main unit or
remote control allows users to cancel the demonstration
screen for 20 seconds and enable the selected operation
even in the demo-on mode.
ꢀ: Volume down
by 10 steps
Mute/Attenuation
You can select mute or attenuation.
ꢁ: Volume off
(Default)
ꢀ: On (Skip
disabled.) (Default)
\CQ-RX300W\ \CQ-RX200W\
AUX1 Skip
If AUX1 is not used, the AUX1 mode is skipped when
selecting the source.
ꢁ: Off (Skip
enabled.)
ꢀ: On (Skip
disabled.) (Default)
\CQ-RX105W\ \CQ-RX102W\
\CQ-RX101W\
AUX Skip
If AUX is not used, the AUX mode is skipped when
selecting the source.
ꢁ: Off (Skip
enabled.)
Notes:
• To return to the regular mode, press [DISP].
\CQ-RX300W\ \CQ-RX200W\
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information,
refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 21 -
Notes:
• The volume can also be adjusted directly using [VOL] on the main unit. (« “General”)
• For further information on SQ (Sound Quality) settings, refer to “Sound Control”.
• Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.:
\CQ-RX200W\ \CQ-RX105W\ \CQ-RX102W\ \CQ-RX101W\
• If the fader is set to front, the pre-amp. output (rear) is decreased.
\CQ-RX300W\ \CQ-RX200W\
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further
information, refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 22 -
Player (Disc Player)
Notes:
Playable Audio File
• The power will be turned on automatically when a disc is loaded.
• A disc which has both CD-DA data and MP3/WMA/AAC data on it
may not be reproduced normally.
CQ-RX300W
CQ-RX200W
CQ-RX105W
CQ-RX102W
CQ-RX101W
MP3/WMA/AAC
MP3/WMA
MP3/WMA
MP3/WMA
MP3/WMA
Notes for AAC playback is only for the model CQ-RX300W.
[ꢁ] [ꢂ]
skip to the previous/next folder.
[ꢂ] (Eject)
ejects the disc.
Disc slot
takes a disc in with the
Printed side up
printed side facing up.
[SRC] (Source)
selects a source.
[DISP] (Display)
switches the information on the display.
(ꢃꢄ) (Play/Pause)
toggles pause/play in the player source.
[4] (RANDOM)/[5] (SCAN)/[6] (REPEAT)
toggles on/off each play mode.
[3] (SCROLL)
[ꢁ] [ꢀ]
skip to the previous/next track/file in
the player mode.
Hold down either of them for fast
reverse/fast forward.
scrolls the information on display.
Notes:
• If you insert an 8 cm disc and cannot eject it, turn ACC of your car
off once and turn it on again, then press [ꢂ] (Eject).
• Do not insert foreign matter into the disc slot.
• Do not insert a disc when the
• Refer to the section of “Notes on Discs” and “Notes on MP3/
WMA/AAC”.
indicator lights.
• This unit does not support 8 cm discs.
Press [SRC] to select the Disc Player
Pause
Press [BAND] (ꢃꢄ).
1source.
2
Select a desired portion.
Press again to cancel.
Track/File Selection
Press [ꢁ] / [ꢀ].
Note: To perform fast forward/reverse, hold down either of
them.
Disc Player (CD-DA disc):
Previous/next track
Disc Player (MP3/WMA/AAC disc):
Previous/next file
Folder Selection (MP3/WMA/AAC)
Press [ꢁ] / [ꢂ].
Download from Www.Somanuals.com. All Manuals Search And Download.
- 23 -
CD-DA Mode Display
Display Change
Lights when the disc is loaded.
Press [DISP] to change the display.
Disc Player
(CD-DA disc):
Disc Player (MP3/WMA/
AAC disc):
Normal
Disc title
Track title
Clock
Normal
Play time
Track number
Play time
Play Mode indicators
Folder name/
Album*
File name/
Title, artist*
MP3/WMA/AAC Mode Display
Clock
*ID3/WMA/AAC Tag On/Off
Hold down [3] for more than
2 seconds.
File number
Play Mode indicators
Lights when folder random/repeat/scan is on.
Folder number
album title and song title/
artist name are displayed.
(Default)
folder name/file name are
displayed.
Notes:
• For scrolling text, press [3] (SCROLL).
• “NO TEXT” is displayed when there is no information on the disc.
Random Play
All the available songs (tracks/files) are played in a random
sequence.
Press [4] (RANDOM).
Press again to cancel.
Folder Repeat Play (MP3/WMA/AAC)
The current folder is repeated.
Hold down [6] (REPEAT) for more than
2 seconds.
Hold down again to cancel.
Folder Random Play (MP3/WMA/AAC)
All the available files in current folder are played in a
random sequence.
Scan Play
The first 10 seconds of each songs (tracks/files) is played
in sequence.
Hold down [4] (RANDOM) for more than
2 seconds.
Hold down again to cancel.
Press [5] (SCAN).
Press again to cancel.
Folder Scan Play (MP3/WMA/AAC)
From the next folder, the first 10 seconds of the first file in
each folder is played in sequence.
Repeat Play
The current song (track/file) is repeated.
Press [6] (REPEAT).
Press again to cancel.
Hold down [5] (SCAN) for more than
2 seconds.
Hold down again to cancel.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 24 -
|