Operating Instructions
DVD Recorder
Model No. DMR-ES20DEB
Panasonic
DVD RECORDER DMR-ES20D
DVD RECORDING
DVD-RAM / DVD-R / DVD-RW / +R
OPEN/CLOSE
REC
/x1.3
This DVD Recorder is for viewing and recording free to view channels only, not pay TV or encrypted channels.
Sales and Support Information
Direct Sales at Panasonic UK
î Order accessory and consumable items for your product with ease and confidence by phoning
our Customer Care Centre
Monday - Thursday 9:00am - 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays).
î Most major credit and debit cards accepted.
î All enquiries, transactions and distribution facilities are provided directly by Panasonic UK Ltd.
î It couldn´t be simpler!
î Also available through our internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
Customer Care Centre
î For customers within the UK: 08705 357357
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Important Safety Warnings
!
The moulded three pin mains plug is supplied for your safety and convenience
and must NOT be cut off.
Fuse cover
!
A 5 amp fuse is fitted in the mains
plug. If the fuse has to be replaced,
it must be of the same rating and
approved by ASTA or BSI to BS1362.
1.Open the fuse
cover with a
screwdriver.
Check for the ASTA mark or the
BSI mark on the body of the fuse.
Fuse
(5 ampere)
2.Replace the
fuse and close
or attach the
fuse cover.
To replace the fuse, open the fuse
compartment with a screwdriver as
shown and replace the fuse and the
cover securely.
!
!
To prevent electric shock, do not remove cover. No user serviceable parts inside.
Refer servicing to qualified service engineer only.
WARNING: To reduce the risk of fire, electric shock or product damage, do not
expose this apparatus to rain, moisture, dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on the apparatus.
!
!
Do not insert metal object into the slots or openings of the unit.
This unit is not disconnected from a.c. mains while it remains connected
to a live mains outlet, even if it has been turned off.
!
!
The socket outlet shall be installed near the equipment and easily accessible or
the mains plug or an appliance coupler shall remain readily operable.
This unit is intended for use in moderate climates.
Caution
!
Avoid exposing the unit to direct sunlight or other heat sources.
Avoid sudden change in temperature or humidity, dew or condensation may
!
form, causing malfunction.
Dispose of batteries in accordance with the instructions given in this book.
Place the unit on a flat, stable surface. Do not place heavy object on top of the unit.
Your attention is drawn to the fact that recording of pre-recorded tapes or discs
!
!
!
or other published or broadcast materials may infringe copyright laws.
This unit is designed for indoor use only.
Do not use in area with strong magnetic fields, e.g. near transmitting antenna.
This product may receive radio interference caused by mobile telephones during
!
!
!
use. If such interference is apparent, please increase separation between the
product and the mobile telephone.
Do not install or place this unit in a bookcase, built-in cabinet or in another
!
confined space. Ensure the unit is well ventilated. To prevent risk of electric
shock or fire hazard due to overheating, ensure that curtains and any other
materials do not obstruct the ventilation vents.
Do not obstruct the unit’s ventilation openings with newspapers, tablecloths,
curtains, and similar items.
!
!
Inside of product
Do not place sources of naked flames, such as lighted candles, on the unit.
Dispose of batteries in an environmentally friendly manner.
!
!
This product utilizes a laser. Use of controls
or adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure. Do not
open covers and do not repair yourself.
Refer servicing to qualified personnel.
Back of product, see page 8
Care and Maintenance
!
The cabinet can be wiped clean with a damp cloth, disconnect from mains before
cleaning. Do not use detergent or solution containing benzol or petroleum.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Dear customer
Thank you for your trust and your decision to purchase this top-quality device.
Panasonic is one of the leading manufacturers of entertainment electronics devices.
We are sure that you will be completely satisfied with this device.
With the new Quick Start feature, the unit is ready for use within approx. 1 second.
Thus, if a DVD-RAM was previously inserted, recording can begin immediately after
the unit is switched on from Standby mode.
Matsushita Electric Industrial Co., Ltd.
Included
DVD
TV
VOLUME
CH
DIRECT TV REC
AV
ccessories
Check that you have the
accessories and items shown
PAGE
1
4
2
5
8
0
3
6
9
CH
VIDEO Plus+
7
CANCEL
INPUT SELECT
DISPLAY
*
SKIP
SLOW/SEARCH
Batteries for the
Remote Control
R6 size
STOP
PAUSE
PLAY/x1.3
AC Mains Lead
RJA0044-3C
ENTER
SUB MENU
S
RETURN
CREATE
CHAPTER
MANUAL SKIP
ERASE
TIMER
REC
REC MODE EXT LINK
RF Cable
Audio / Video Cable
TIME SLIP STATUS
STTL
PROG
CHECK
Panasonic
A
DVD/TV
EUR7729KK0
K1TWACC00001
K2KA6CA00001
Remote control
EUR7729KK0
Guarantee Card
Quick Start Guide
Operating Instructions
Preparation
1. Read the operating instructions, the safety precautions and the information on setting
up the unit on page 3 thoroughly before you connect, operate or adjust any settings
on the unit.
2. Insert the batteries into the remote control.
3. Connect the device to your television.
10
Connecting with 21-pin Scart cable
14
12
12
Connecting with RF cable (Aerial cable)
Connecting with Audio/Video cable
Connecting with S VIDEO cable
4. The automatic settings start after the unit is switched on.
The station settings of all receivable television stations are automatically transferred to
the DVD Recorder. The Auto-Setup begins with download of the digital data afterwards
starts the download of analogue data.
With Q Link function and 21-pin Scart socket:
First Auto-Setup begins with download of the digital data. Then during [Download from
TV], the station settings of all receivable analogue television stations are automatically
transferred from your television set to the DVD Recorder.
Connecting with 21-pin Scart cable:
Setup with Q Link
11
11
Setup without Q Link (Automatic Tuning)
Connecting with RF cable (Aerial cable):
Auto-Setup with RF cable (Aerial cable) (Automatic Tuning)
Connecting with Audio/Video cable / S VIDEO cable:
Setup without Q Link (Automatic Tuning)
14
11
5. The basic settings of the unit are complete.
You can change the basic settings in the SETUP menu.
41- 48
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Inserting Batteries
The batteries last for about a year, depending on how often you use the remote control unit.
Fit the batteries into
the remote control
!
Do not mix old with new batteries, or batteries of different types.
Only use batteries without any harmful substances (lead, cadmium, mercury).
Do not use rechargeable type batteries.
!
!
!
Remove the batteries if the remote control unit will remain unused for longer periods of time.
Do not heat or short-circuit the batteries.
!
Immediately remove used-up batteries and replace with batteries of type AA, UM3 or R6.
Be sure to put in the batteries the right way round + and -.
!
Dispose of batteries, packaging material and the unit according to statutory
regulations. They must not be thrown into the household refuse.
Product Introduction
This unit is a DVD recorder with an integrated DVB tuner. This means that you can receive
and record both analogue and terrestrial digital channels without having to connect an
additional DVB receiving unit (set-top box). Your unit has many additional useful features
especially for the digital channels.
18
TV Guide
Electronic programme guide with current information on the programme and a
7-day preview. Broadcasts can also be sorted by categories.
Recording is easy by selecting the desired station.
42
Edit Profiles
Create profiles (station lists) in which your preferred stations can be sorted and
saved.
Find your favourite stations quickly at the accustomed programme locations.
DVB only
52
Banner
When switching stations, Banners appear that immediately display the current
and next programme.
DVB only
DVB only
52
Subtitles
Your can show or hide subtitles (if available for the programme).
Subtitles can also be recorded.
52
Multi Audio
With Multi Audio, you can choose from different audio channels for a programme.
For example, if a movie is broadcast with Multi Audio, you can listen to the movie
either with the original sound or its English translation.
DVB only
52
MHEG
The unit can receive MHEG service.
11
Q Link
With the Q Link feature, the television accepts analogue stations directly.
A station scan does not need to be performed for the analogue stations.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Standby/on switch
TV
Turn the television set on and off.
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
Switching this unit into standby mode does not
disconnect it from the mains.
AV
Select the AV input on the television set.
CH: Select the channel on the television set.
VOLUME
CH
VOLUME: Volume control of the television set.
1
4
7
2
5
8
0
3
6
9
Numeric buttons - direct input, example
DIRECT TV REC
0
1
VCD
5
5
5:
5:
+
+
15:
+
+
27
Direct TV record to DVD
0
0
0
1
5
5
MP3 JPEG
+
15:
+
0
0
8
Channel e.g. 800:
+
+
INPUT SELECT
CANCEL
SKIP
Switch button of the AV input between
AV1, AV2, AV3 (front) and AV4.
Cancel button
Select or save a setting
23
SKIP: Skip chapters, titles or pictures.
DVD
TV
VOLUME
CH
PAGE
DIRECT TV REC
AV
PAGE: Page in the electronic TV Guide.
Stop recording, replay or forward/
reverse action.
STOP
PAUSE
22
CH
CH: Channel select button.
PAGE
CH
1
4
2
5
8
0
3
6
9
VIDEO Plus+
22
18
31
53
Pauses a recording or playback.
Launch the TV Guide.
VIDEO Plus+ menu
VIDEO Plus+
7
INPUT SELECT
CANCEL
DISPLAY
DISPLAY
Launch the disc menu.
*
SKIP
SLOW/SEARCH
SLOW/SEARCH
DVB only
PAUSE
PLAY/x1.3
STOP
Launch the MHEG service.
SLOW/SEARCH: Search or slow
motion playback
23
23
52
Exit in the MHEG service.
Starts playback.
RAM
22
DIRECT NAVIGATOR TITLE VIEW
PLAY/ x1.3
You can increase the playback speed.
Hold PLAY during playback.
PLAY/x1.3
35
ENTER
TOP MENU: Main menu of DVD-Video.
SUB MENU
S
RETURN
52
Display the Banner.
CREATE
CHAPTER
MANUAL SKIP
ERASE
TIMER
Direction buttons in the menu navigation.
Selection of groups
or titles.
Freeze frame or time loop playback.
REC
REC MODE EXT LINK
33 50
FUNCTIONS selection menu.
Exit a menu.
STTL
PROG
TIME SLIP STATUS
CHECK
SUB MENU
RETURN
Panasonic
Launch sub menus.
S
DVD/TV
EUR7729KK0
Create Chapter: Split the recording into
chapters. Yellow Button: Functions in
MHEG Service, Edit Profile, TV Guide.
Manual Skip: Jump forwards 30 seconds.
Red Button: Functions in MHEG Service,
Manual Tuning, TV Guide.
CREATE
CHAPTER
MANUAL SKIP
24
24
Erase: Erase a title during playback.
Blue Button: Functions in MHEG
Service, Edit Profile, TV Guide, Banner.
ERASE
Green Button: Functions in MHEG Service,
Edit Profile, TV Guide.
35
REC
EXT LINK
27
32
29
52
Record
Record with external recording control.
Switch timer on and off.
REC MODE
28
Record mode button (XP, SP, LP, EP)
DVB only
Displays or hides subtitles.
STTL
TIME SLIP
STATUS
TIME SLIP: Select the timeframe to
be skipped.
24
Audio L/R function: Press and hold
STTL for more than 5 seconds.
PROG
CHECK
51
Detail information appears on the screen.
29
TIMER RECORDING menu
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Point the remote control at the unit’s sensor. Avoid obstacles in the path of the
transmission. The maximum range of the remote control is 7 m directly in front of the unit.
Keep the transmission window and the unit sensor clean. The procedure can be impaired
by direct sunlight or doors of glass cabinets.
Child lock
You can lock the buttons of the unit and the remote control.
!
X HOLD
Press and hold RETURN and ENTER until
The unit is now locked.
In order to unlock the child lock, repeat the procedure until
appears in the display.
X HOLD
7m
30°
!
disappears.
30°
Remote control
signal sensor
Operating a television set
Change the remote control code to operate your television set.
!
Press and hold the TV on and off switch button.
Enter the two-digit code for your television set.
The input must be repeated after batteries are changed.
!
Trademark
Panasonic
AIWA
Code Trademark
01-04,45 GOLDSTAR/LG
Code Trademark
31 MIVAR
Code Trademark
24 SALORA
36 SAMSUNG 31,32,43
Code
26
35 GOODMANS 05,06,31 NEC
27,30 GRUNDIG 09 NOKIA
09 HITACHI 22,23,31,40-42 NORDMENDE
10,15 INNO HIT
05,06 IRRADIO
31 ITT
AKAI
25-27 SANSUI
10 SANYO
05,31,33
BLAUPUNKT
BRANDT
BUSH
CURTIS
DESMET
DUAL
21
06
SBR
34 ORION
30 PHILIPS
25 PHONOLA
17,39 PIONEER
07 PYE
37
05,06
31,33
38
SCHNEIDER 05,06,29-31
SELECO
SHARP
SIEMENS
06,25
18
05,31,33 JVC
05,06 LOEWE
31 METZ
09
SINUDYNE 05,06,33
05,06
05,06
10
SONY
TELEFUNKEN 10-14
THOMSON 10,15,44
08
ELEMIS
FERGUSON
28,31 RADIOLA
10 MITSUBISHI 06,19,20 SABA
Some television models of the brands listed above, (e.g. older Panasonic units), cannot
be operated using the remote control.
Switching to AV input on your Panasonic television set
!
Press AV. Each press of the button switches between TV reception and AV input.
If you use another Panasonic device at the same location, change the mode of the
remote control so that you can operate the units independently of each other.
Setting the remote control
Setting the remote control mode for unit.
!
SETUP
Press FUNCTIONS in stop mode.
Remote Control
DVD 1
On
!
Clock
Use
Use
Use
Use
to select [To Others] and confirm with ENTER.
to select SETUP and confirm with ENTER.
to select [Others], to select [Remote Control] and confirm with ENTER.
to select the desired mode [DVD 1, 2 or 3] and confirm with ENTER.
Owner ID
!
!
!
Tuning
Disc
Quick Start
System Update
Shipping Condition
Default Settings
Picture
Sound
Display
Accept the desired mode on the remote control.
Remote Control
Connection
Others
DVD1
!
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
Press RETURN to exit the menu.
DVD 2
DVD 3
!
SELECT
ENTER
RETURN
If the mode of the remote control does not correspond with that of the unit,
[REMOTE DVD 1 / 2 / 3] will appear on the unit display.
!
Press and hold the ENTER button for approx. 2 seconds and, at the same time,
enter the number that corresponds to the selected mode (1, 2 or 3).
If you want to operate two units independently of each other with the same remote
control, then change the mode of the remote control.
The input must be repeated after batteries are changed.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Display
Disc Tray
DVD RECORDER DMR-ES20D
Panasonic
DVD RECORDING
DVD-RAM / DVD-R / DVD-RW / +R
OPEN/CLOSE
REC
EXT LINK
CH
/x1.3
S
VIDEO IN
VIDEO IN L/MONO - AUDIO IN
AV3
-
R
1
2
3
4
5
6
7
8
9
Standby/on switch
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
1
Front Connections
2
3
S VIDEO Input (AV3)
S VIDEO IN
AV3
AV3 Input Terminal
VIDEO IN L/MONO-AUDIO IN-R
Front Access
Recording with external recording control
DVD
EXT LINK
CH
4
5
6
7
Channel selector button
Open and close the disc tray
OPEN/CLOSE
Stop
/ x1.3
Playback / x1.3
Record
8
9
REC
Rear Panel
DVD Recorder
VIDEO
S
VIDEO OUT
RF OUT
RF IN
L
AV1 (TV)
Y
PR
PB
AUDIO
AC IN
OPTICAL
S
VIDEO
R
AV4 IN
AV2 (EXT)
1
4
5
6 7
9
8
10
2
3
Connections
1
RF OUT
AV1 (TV)
21-pin Scart socket = TV connection
= Aerial output
RF IN = Aerial input
2
3
4
AV2 (EXT)
21-pin Scart socket = connection to an external unit
AV4 IN
= Audio input right/left channel
Video input
OUT
= Audio output right/left channel
Video output
5
6
7
S VIDEO AV4 IN = S VIDEO input socket
S VIDEO OUT = S VIDEO output socket
COMPONENT VIDEO OUT (PROGRESSIVE/INTERLACE)
Y = Luminance signal (luminance)
8
P
P
B = Chrominance signal (colour difference) R = Chrominance signal (colour difference)
OPTICAL DIGITAL AUDIO OUT (PCM BITSTREAM)
= Digital audio output
9
10
AC IN~
= Power supply
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
D
ink
D.MIX
PLAY
Information on the display
TIMER-controlled recording.
Blinking: There are less than 10 minutes until the start of a programmed
TIMER recording. The device is not set to TIMER standby mode.
External-Link display
On: A TIMER-controlled recording is being performed by an external device.
ink
Current time, Disc recording and playback counter,
various messages.
Reading Disc.
Recording
Playback
PLAY
PL Number of Playlist
T
G
T
Title number
Chapter number
Track number
Group number
C
100 Channel number
PLAY
Simultaneous Recording/Playback
Down-Mix
D.MIX
XP, SP
LP, EP
Record mode
All on: FR mode (for flexible recordings or TIMER-controlled recordings).
D
Digital channel
DVD-RAM
VCD +RW
VR
Disc type e.g.: DVD-RAM, DVD-R, ,DVD-RW(VR), DVD-Video, Video-CD.
21-pin Scart Socket
The 21-pin Scart socket transmits both input and output signals for picture and sound.
TVs equipped with the same type of socket can be connected here.
This type of socket is also called Peritel, Euro Connector and Euro AV.
21-pin Scart Socket
1
AV1 Scart Socket (NORMAL)
1 Audio output CH2 (R)
2 Audio input CH2 (R)
3 Audio output CH1 (L)
4 Audio ground
5 Blue ground
AV2 Scart Socket
1 Audio output CH2 (R)
2 Audio input CH2 (R)
3 Audio output CH1 (L)
4 Audio ground
5 Blue ground
3
5
7
9
11 13 15 17 19
21
2
4
6
8
10 12 14 16 18 20
6 Audio input CH1 (L)
7 Blue
6 Audio input CH1 (L)
7 Blue
8 Switching voltage
9 Green ground
10 Reserved
11 Green
12 No connection
13 Red ground
14 Blanking ground
15 Red
16 Blanking
8 Switching voltage
9 Green ground
10 Control signal
11 Green
12 Reserved
13 Red ground
14 Blanking ground
15 Red
16 Blanking
17 Video output ground
18 Video input ground
19 Video output
20 Video input
17 Video output ground
18 Video input ground
19 Video output
20 Video input
21 Ground
21 Ground
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with a 21-pin Scart cable
1Aerial
RF cable /
Aerial cable
AV1 21-pin Scart socket
RF IN
Aerial input
DVD Recorder
VIDEO
S
VIDEO OUT
RF OUT
RF IN
L
L
AV1 (TV)
Y
PB
PR
AUDIO
AC IN
OPTICAL
S
VIDEO
COMPONENT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
R
R
AV4 IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV4 IN
OUT
AV2 (EXT)
AC IN~
RF OUT
Aerial output
AC mains lead
4
21-pin Scart cable
Necessary for TV with Q-Link
3
RF cable /
Aerial cable
2
TV
Aerial
input
AC mains lead
4
Follow the steps below.
Disconnect AC mains from all units.
1 Connect the aerial to the RF IN (Aerial input) of the DVD Recorder.
2 Connect the RF OUT (Aerial output) of the DVD Recorder to the Aerial input
of the television set.
3 Connect the AV1 socket (21-pin Scart socket) of the DVD Recorder to the
Scart input of the television set.
4 Connect the DVD Recorder and the television set to the AC mains socket.
If your television supports Q Link follow the steps for Auto-Setup with Q Link on page 11.
If your television doesn't support Q Link follow the steps for Auto-Setup without Q Link
on page 11.
If your television supports Q Link or RGB, connect it to the DVD Recorder with a fully
wired 21-pin Scart cable.
46
SETUP - Connection - [AV1 Output]
Note: For all connections additional cables and equipment shown are not supplied.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup with Q Link
Download from TV using
(Registered trademark of Panasonic)
Auto-Setup
You can download the tuning positions for analogue channels from the TV set.
Time and date will be set automatically by Auto Clock Setting function.
35
, please wait.
Ch
Dig
ita
l
A
ut
o-
S
e
t
u
p
inro
p
g
ress
RET
U
R
N
:
to
a
b
o
r
t
Note that you must first perform a station search if you use the TV for the first time.
If you have a Panasonic television, [Download from TV] will be displayed automatically at
the beginning of the station transfer.
Download from TV
RETURN
4
Pos
!
Switch your television on and select the AV channel.
Switch the device on using the Standby/on switch.
!
Download in progress, please wait.
RETURN: to abort
The unit starts the station transfer. A station search for the digital channel starts first.
The number of channels found is displayed on the screen after the station search.
Then the analogue station positions are automatically transferred from the television.
The station transfer is complete when the Owner ID screen appears.
RETURN
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
Owner ID
!
To set the Owner ID now, use and press the Numeric buttons or
digit PIN number. Press , to correct the digit.
to enter a four-
PIN number
Name
****
!
!
!
!
!
!
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
House No.
Postcode
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
.
RETURN
RETURN : leave
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Clock
!
Press
to set the correct time and date and press ENTER to finish this setting.
Automatic Off
Date
Time
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
:
:
.
.
0
00
00
2005
1
1
No
0
9
Clock cannot be set automatically.
SELECT Please set the clock manually.
ENTER: store RETURN: leave
If Auto-Setup has previously been completed the DVD Recorder will not start
Auto-Setup automatically. In this case you can re-start Auto-Setup again.
If you want to cancel Auto Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
CHANGE
ENTER
43
RETURN
Setup without Q Link (Automatic Tuning)
Auto-Setup
The automatic setup saves all available TV stations. If the station also broadcasts date and
time, then the clock is also set automatically.
Auto-Setup
Ch
35
te , please wait.
!
Switch on your television and select the AV channel.
With the Standby/on switch turn on the DVD Recorder.
!
Dig
RET
U
ita
R
u
l
c
A
N
heut
o-
e
S
n
b
e
d
o
t
e
r
u
t
p
, bintt
p
e
ro
w
g
a
resns.
r
:
to
a
Automatic tuning for all available TV stations begins. The search is first performed for the
digital and then the analogue stations. The number of channels found is displayed on the
screen after the station search. Approximate duration is 5 minutes.
Auto-Setup
Ch
RETURN
35
roagrtreesns., please wait.
After Automatic tuning has finished, the Owner ID screen will appear.
Ana
S
lo
u
g
c
u
h
e
e
A
S
u
e
to
n
-
d
S
e
e
r
t
,
u
b
p
it
i
t
n
e
p
w
RET
U
R
N
: t
o
abort
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN
RETURN button. Your DVD Recorder is now ready to use.
!
To set the Owner ID now, use and press the Numeric buttons or
digit PIN number. Press , to correct the digit.
to enter a four-
Owner ID
!
!
!
!
!
!
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
PIN number
Name
****
.
House No.
Postcode
RETURN
RETURN : leave
Clock
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
!
Press
to set the correct time and date and press ENTER to finish this setting.
Automatic Off
Date
Time
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
:
:
.
.
0
00
00
2005
1
1
No
0
9
If Auto-Setup has previously been completed the DVD Recorder will not start Auto-
Setup automatically. In this case you can re-start Auto-Setup again. If you want to
cancel Auto-Setup before it has finished, press the RETURN button.
You can restart Auto-Setup again.
Clock cannot be set automatically.
SELECT Please set the clock manually.
ENTER: store RETURN: leave
CHANGE
43
ENTER
RETURN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with Audio/Video cable
Aerial
1
Follow the steps below.
RF cable /
Aerial cable
Disconnect the AC mains from all units.
RF IN
Aerial input
DVD Recorder
1 Connect the aerial to the RF IN (Aerial input) of
the DVD Recorder.
VIDEO
S
VIDEO OUT
RF OUT
RF IN
L
L
AV1 (TV)
Y
PB
PR
AUDIO
AC IN
OPTICAL
S
VIDEO
COMPONENT
VIDEO OUT
(PROGRESSIVE/
NTERLACE)
R
R
4 IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV4 IN
OUT
AV2 (EXT)
2 Connect the RF OUT (Aerial output) of the DVD
Recorder to the Aerial input of the television set.
AC IN~
Audio/Video
output
RF OUT
Aerial output
3 Connect the AV4 OUT (AUDIO L/R, VIDEO) of
the DVD Recorder to the input of the television
set.
RF cable /
Aerial cable
2
AC mains lead
4
4 Connect the DVD Recorder and the television set
to the AC mains socket.
Audio/Video cable
3
TV
Audio/
Video
input
Follow the steps for Auto-Setup without Q Link on
page 11.
Aerial input
AC mains lead 4
Connecting with S VIDEO cable
Aerial
1
Follow the steps below.
RF cable /
Aerial cable
S VIDEO
Disconnect the AC mains from all units.
RF IN
output
Aerial input
DVD-Recorder
1 Connect the aerial to the RF IN (Aerial input)
of the DVD Recorder.
VIDEO
S
VIDEO OUT
RF OUT
RF IN
L
L
AV1 (TV)
Y
PB
PR
AUDIO
AC IN
OPTICAL
S
VIDEO
COPONENT
VIDOUT
(PROGRIVE/
INTERLACE)
R
R
AV4 IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV4 IN
OUT
AV2 (EXT)
2 Connect the RF OUT (Aerial output) of the DVD
Recorder to the Aerial input of the television set.
AC IN~
RF OUT
Aerial output
Audio output
3 Connect the AV4 OUT (AUDIO L/R) of the
DVD Recorder to the input of the television set.
Connect the S VIDEO OUT of the DVD Recorder
to the input of the television set.
AC mains lead
4
RF cable /
Aerial cable
2
Audio/Video cable
S VIDEO cable
3
3
Aerial input
4 Connect the DVD Recorder and the television
set to the AC mains socket.
TV
Follow the steps for Auto-Setup without Q Link
on page 11.
Audio
input
S VIDEO
input
AC mains lead
4
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Satellite Receiver
Parabolic
antenna
Aerial
Sat cable
21-pin Scart socket
2
AC mains socket
RF cable /
Aerial cable
2
3
To AC mains socket
21-pin Scart cable
TV
RF IN
Aerial input
(AV1)
DVD Recorder
Aerial input
VIDEO
S
VIDEO OUT
AC mains
RF cable /
RF OUT
RF IN
L
L
socket
AV1 (TV)
Y
PB
PR
Aerial cable
AUDIO
AC IN
OPTICAL
S
VIDEO
COMPONENT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
R
AV4 IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV4 IN
OUT
AV2 (DECODER/EXT)
1
2
AC IN~
(AV2)
RF OUT
Aerial output
AC mains lead
3
AC mains
lead
3
21-pin Scart cable
1
Follow the steps below.
Disconnect the AC mains from all units.
1
Connect a 21-pin Scart cable (fully wired) to the AV2 21-pin Scart socket of the DVD
Recorder and to the 21-pin Scart socket of the satellite receiver.
Connect a 21-pin Scart cable (fully wired) to the AV1 21-pin Scart socket of the DVD
Recorder and to the 21-pin Scart socket of the TV set.
2
3
Connect aerial to the RF IN (Aerial input) of the DVD Recorder.
Connect the parabolic antenna to the Aerial in connector of the satellite receiver.
Connect the DVD Recorder´s RF OUT (Aerial output) to the TV set’s Aerial in
connector.
Connect the satellite receiver, DVD Recorder and TV set to the AC mains supply.
Switch on the TV set and DVD Recorder.
Set the settings for AV2 according to the connected satellite receiver.
46
Switch on the satellite receiver. Then follow page 11 for Auto-Setup with 21-pin Scart
cable.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting with RF cable (Aerial cable)
Aerial
1
Follow the steps below.
RF cable /
Aerial cable
RF IN
Aerial input
Disconnect the power of all units.
DVD Recorder
Connect aerial to the RF IN (Aerial input)
connector of the DVD Recorder.
1
VIDEO
S
VIDEO OUT
RF OUT
RF IN
L
L
AV1 (TV)
Y
PB
PR
AUDIO
AC IN
OPTICAL
S
VIDEO
COMPONENT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
R
R
AV4 IN
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AV4 IN
OUT
AV2 (EXT)
AC IN~
2
3
Connect the DVD Recorder´s RF OUT (Aerial
output) to the TV set’s Aerial in connector.
RF OUT
Aerial output
Connect DVD Recorder and TV set to the AC
mains socket.
AC mains lead
3
RF cable /
Aerial cable
2
Follow the steps for Auto-Setup on page 14.
TV
Aerial
input
AC mains socket
AC mains lead 3
Auto-Setup with RF cable (Aerial cable) (Automatic tuning)
DVD Display
!
Turn on your television set.
With the Standby/on switch turn on the DVD Recorder. Automatic tuning for all available
TV stations begins. Approximate duration is 5 minutes.
!
- While Auto-Setup is running the first digit of the DVD Recorder display will flash.
After a while it will stop flashing and the RF output channel number will be displayed.
Auto-Setup
35
ease wait.
Ch
- Select an unused channel pre-set on your TV and tune it to the RF output channel
number shown on the DVD Recorder display (or until you can clearly see the Auto-Setup
screen). Store the new RF output channel (refer to the instructions for your TV).
S
R
u
u
c
T
to
U
h
-
e
R
S
S
N
et
:
e
u
t
n
p
o
deinr,
p
b
r
it
r
o
t
tegr
w
e
a
s
r
s
t
,
e
p
n
l
.
a
b
o
!
After Automatic tuning has finished, the Owner ID screen will appear.
RETURN
In some cases, the RF output channel may interfere with the TV stations transmitted in
your area. This may prevent you from seeing the On-Screen Display clearly.
43
Please see page 15 for removing the interference before restarting Auto-Setup.
Owner ID
Owner ID
You can complete the Owner ID now or skip this step and do it later. To do it later, press the
RETURN button. Your DVD Recorder is now ready to use.
PIN number
Name
****
!
To set the Owner ID now, use and press the Numeric buttons or
digit PIN number. Press , to correct the digit.
to enter a four-
House No.
Postcode
!
!
!
!
!
!
RETURN
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
You will now see the TV picture. Your DVD Recorder is now ready to use.
RETURN : leave
.
Clock
Automatic Off
Date
If the clock setting menu appears
(Auto clock set was not possible due to a weak signal)
Time
:
:
.
.
0
00
00
2005
1
1
!
No
Press
to set the correct time and date and press ENTER to finish this setting.
0
9
Clock cannot be set automatically.
Please set the clock manually.
ENTER: store RETURN: leave
CHANGE
SELECT
ENTER
Note: A wrong date or time will influence the programmed recording of TV programmes
(don't forget to change summer time and winter time).
RETURN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Interference /
Changing RF output channel
In some cases, interference (lines or patterning) or a very poor picture may appear
on the TV when the DVD Recorder is connected. If this happens, follow the steps
below to change the RF output channel to remove the interference.
TV screen
The picture with interference
!
Press the FUNCTIONS button for more than 5 seconds. The RF output channel
number is displayed on the DVD display.
RF OUTPUT CHANNEL
DVD
21
CH:
PAGE
1
4
7
2
5
8
0
3
6
9
!
SELECT
ENTER
Press the Numeric buttons or use the Channel (CH) button to select
a channel number, which differs at least by 2 or 3 from the present
channel number. (For example, if the original channel number was
28, enter 31.)
CH
RETURN
On-Screen Display
Test pattern indication
DVD display
!
!
Retune your TV until you receive the Test pattern. It may be necessary to
repeat steps above until you can see the Test pattern clearly.
If using a Scart cable please see the note below.
Indication when the RF output
channel is 21 (example)
Press ENTER to finish this setting.
Indication after changing the RF
output channel to 31 (example)
Set the RF output channel of the DVD Recorder to [- -] (RF OFF) if the DVD
Recorder is connected to the TV via the 21-pin Scart cable.
RF OUTPUT CHANNEL
DVD
31
CH:
!
Press FUNCTIONS for about 5 seconds. The preset channel will be displayed on
the DVD display.
SELECT
ENTER
RETURN
!
!
Press channel select buttons CH or 0 to invoke [- -].
Confirm with ENTER.
Test pattern indication
...
21
68
(RF OFF)
The clear picture
Checking the Settings after Auto-Setup
!
N
Press FUNCTIONS to display the FUNCTIONS Menu.
Press
Press
C
T
O
!
!
N
to select [To Others] and then press ENTER.
to select SETUP and then press ENTER.
FUNCTIONS
DVD-RAM
Disc Protection Off
PLAYLISTS
DIRECT NAVIGATOR
FLEXIBLE REC
!
Press to select [Manual] and then press ENTER to display the list of tuned TV
stations and confirm that all available TV stations have been set correctly.
SETUP
TV Guide
TIMER RECORDING
VIDEO Plus+
DISC MANAGEMENT
To Others
Return
If station name is [
]:
ENTER
RETURN
The asterisks indicate that a station was found during Auto-Setup but has not been
named (due to weak signal).
44
The stations in the list with asterisk will need to be named manually.
If station name is [- - - -]:
The dashes represent unused channel positions.
You can set stations manually if you want to.
44
SETUP
Edit Profiles
Auto-Setup Restart
Digital
RETURN
!
Press RETURN to exit the On Screen Display.
Tuning
Disc
Add New DVB Service
Signal Quality
Analogue
Manual
Picture
Sound
Display
Manual Tuning
Connection
Others
When the station names have not been set correctly, see page 44 for details.
When no station has been found, confirm all connections of the DVD Recorder
again and restart the Auto-Setup. See page 43 for details.
Pos Name
Ch
Pos Name
Ch
901 BBC1
902 BBC2
903 ITV
904 CH4
905 CH5
22
911
912
913
914
915
916
917
918
919
920
23
24
25
26
30
906
* * * *
907
908
909
910
SELECT
ENTER
!
Check and sort your digital channel in the Setup menu under [Edit Profiles].
See page 42 for details.
RETURN
Delete
TV Reception Channels
15
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT socket
These sockets can be used for interlace or progressive output and deliver a clearer picture
than the S VIDEO OUT socket. Connections via these sockets output colour difference
signals (PB/PR) and brightness signal (Y) separately. The properties of the COMPONENT
VIDEO input socket are dependent on the television set or screen.
Always connect sockets of the same colour.
Connect the Audio cable to the corresponding audio input sockets of the television.
Connecting a television with COMPONENT VIDEO input sockets
If your television with LCD or plasma screen supports the progressive procedure,
connect it to the COMPONENT VIDEO OUT sockets.
If you want to enjoy progressive-quality video, set Progressive to [On].
!
Press FUNCTIONS in stop mode.
!
Use
Use
Use
Use
to select [To Others] and confirm with ENTER.
to select SETUP and confirm with ENTER.
!
!
!
to select [Connection],
to the select the [On] option and confirm with ENTER.
,
to select [Progressive] and confirm with ENTER.
TV
COMPONENT
VIDEO IN
Y
PB
PR
A
B
C
A
B
Audio
input
L/R
Video cable
A
Audio cable
A
Green/Y
Blue/PB
Red/R
White/L
B
B
C
Red/PR
S
VIDEO OUT
VIDEO
AUDIO
L
Y
P
B
OPTICAL
S
VIDEO
AV4 IN
R
DIGITAL AUDIO OUT
(PCM BITSTREAM)
OUT
AUDIO OUT L/R
If the AV1 Output setting in the SETUP menu is set to [RGB (without component)], no
output will be available from the COMPONENT VIDEO OUT sockets. Set this option to
[Video (with component)].
If the unit is connected to the television via the VIDEO OUT, the S VIDEO OUT or the AV1
socket, output takes place in the interlace format regardless of the settings.
Progressive television picture
The progressive aspect ratio (height to width) is set to 16:9. DVD-Video with an aspect ratio
of 16:9 will be displayed properly. However, video material with an aspect ratio of 4:3 will be
displayed stretched to the right and left. If it is possible to adjust the aspect ratio of
46
your television for progressive images, set the Progressive setting to [On].
Information for Progressive-compatible televisions (PAL)
LCD/plasma TVs or LCD projectors
Conventional TVs
In normal televisions, progressive output can lead
to flickering, even if the television is progressive-
compatible. Make sure that the Progressive
setting is set to [Off].
If Progressive output is used, videos can be viewed
at a high resolution, e.g. from DVD-Video. The
Component Video Output of this unit is connected
with the television set. Set Progressive to [On].
COMPONENT
VIDEO OUTPUT
COMPONENT
VIDEO OUTPUT
Progressive output
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO IN
DVD-Recorder
DVD-Recorder
16
Download from Www.Somanuals.com. All Manuals Search And Download.
External devices
Connecting an analogue amplifier or an analogue system component
In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier
or an analogue audio component.
!
Connect the analogue output (L/R) e.g. to a Dolby Pro Logic amplifier.
As described, connect the Audio cable according to the colours and markings
of the connection sockets (white/L, red/R).
!
Amplifier (example)
VIDEO
R
AUDIO IN
L
L
L
AUDIO
White/L
Audio cable
Red/R
R
R
AV4 IN
OUT
AUDIO OUT (L/R)
Connecting a digital amplifier or a digital system component
!
Connect an amplifier with a Dolby Digital-, DTS- or MPEG decoder.
Use an optical digital audio cable.
!
!
In the Sound SETUP menu, change the [Digital Audio Output] setting
according to your connected digital amplifier.
45
You cannot use DTS Digital Surround decoders that are not suitable for DVD.
This device can playback
stereo sound in Dolby Digital
(2 channels). Connect an
amplifier with built-in Dolby
Digital decoder in order to be
able to enjoy Surround Sound.
Amplifier (example)
OPTICAL
Y
P
B
OPTICAL
Connect this unit to a device
with a DTS decoder in order to
be able to play DVDs with this
symbol.
DIGITAL AUDIO OUT
(PCM BITSTREAM)
Optical digital
audio cable
Push the jack all the
way into the socket
with this side facing
up.
Connecting to the AV3 input sockets (e.g. Camcorder)
Before you connect the cable, make sure that the power to both devices is
turned off. After you have connected the cables, switch both devices on.
If the audio output of the other device is mono, connect it to the L/MONO socket.
Both the left and the right channels will be recorded if the connection is made via
the L/MONO socket.
Choose one of the two connection possibilities.
Connection with S VIDEO cable and audio cable (L/R) produces the best quality.
S VIDEO IN
VIDEO IN L/MONO - AUDIO IN - R
AV3
S VIDEO IN
VIDEO IN L/MONO - AUDIO IN - R
AV3
A
B
A
B
C
Audio/
Video cable
Audio/
Video cable
A
Yellow (Video)
White (L)
Red (R)
A
B
C
White (L)
S VIDEO cable
B
Red (R)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Guide
The electronic TV Guide provides a quick overview of the television and radio programmes
of your digital stations. The TV Guide provides up to 7 days preview and the option of
restricting the display to certain categories like Movies or Sports.
Tue 12/05/05 10:45
First use of the TV Guide:
U
ENTER
N
C
Programme information will be gradually stored on the TV Guide list after completion of
Auto Setup or each time mains power to the unit is switched on. This process may take
some time due to the nature of broadcast.
I
N
S
Note: all programme information will be lost when mains power to the unit is switched off.
Direct Access:
!
Press GUIDE on your remote control.
The TV Guide programme overview is displayed.
Wed13/05/05 19:45
Prog.Type
TV Guide: Landscape
Wed 13th
Access via the FUNCTIONS Menu:
!
Category
All Services
All Types
Press FUNCTIONS on your remote control.
Use to select [TV Guide] and press ENTER.
The TV Guide programme overview is displayed.
19:00~20:00 Emmerdale
!
Time: 19:30 20:00
20:30
21:00 21:30
East... D.I.Y. SOS
Hot Wars
Red Cap
1
2
3
4
5
6
7
BBC 1
BBC 2
ITV 1
Chan...
Five
Holiday Programme Holi...
Emm... Coronation Street The Bill
Scrapheap Cha... Pepsi Chart Show
The TV Guide is constantly updated in the background. Thus, the display can change
during viewing. Analogue channels can be identified by the programme number.
News
Sex and the City
Terminator 2
News
Me out of here !
Rugby 15 to 1
+24 Hr
Pop Idol
Category
ITV 2
S4C
Example:
1 BBC 1 - digital station
901 (A) BBC 1 - analogue station
There is no TV Guide information being broadcast for analogue channels.
Scrapheap C...
Prog.Type
v
SELECT
VIEW
Page +
Page –
Guide
Change Display Mode
RETURN
v
Launching and Operating the TV Guide
Two convenient TV Guide lists (Landscape view and Portrait view) in which you can select
the desired station and display programme information are available in the TV Guide.
Landscape view in the TV Guide
!
Press GUIDE to open the TV Guide.
Tue 12/05/05 10:45
Prog.Type
TV Guide: Landscape
Category
The approximate programme start times are shown in the time bar in 30-minute increments.
As soon as you select a programme, the programme name and time appear in the line
above the time bar.
Wed 13th
All Services
All Types
21:00~22:00 Red Cap
Time:
BBC 1
BBC 2
ITV 1
20:00
20:30
21:00 21:30
Red Cap
19:30
East... D.I.Y. SOS
Hot Wars
1
2
3
!
Use
Only current and future programmes are shown.
You can also turn the smart wheel on your remote control to select an item.
Turning right: Move the cursor keys downwards.
Turning left: Move the cursor keys upwards.
to navigate within the TV Guide list.
Holiday Programme Holi...
Emm... Coronation Street The Bill
Scrapheap Cha... Pepsi Chart Show
4
Chan...
!
5
Five
News
Sex and the City
Terminator 2
News
Me out of here !
Rugby 15 to 1
+24 Hr
Pop Idol
6
7
ITV 2
S4C
Scrapheap C...
-24 Hr
Category
Prog.Type
v
SELECT
TIMER REC
Page +
!
Use PAGE
to browse through the TV Guide list.
Guide
Change Display Mode
RETURN
Page –
v
Jump ahead 24 hours:
!
Press the Green button to jump ahead by one day.
Jump back 24 hours:
!
Press the Red button. You can only jump back to the current date.
Changing Stations in Landscape view
!
Use to select a station.
To see the current programme press ENTER.
!
The current programme can be identified by the changed cursor. It is displayed as a yellow
frame around the selected entry.
To switch between Landscape view and Portrait view, press GUIDE.
Portrait View in the TV Guide
!
Press GUIDE to open the TV Guide.
Use
are shown.
!
to navigate within the TV Guide list. Only current and future programmes
Wed 13/05/05 10:45
Prog.Type
!
!
TV Guide: Portrait
Wed 13th
You can also turn the smart wheel on your remote control to select an item.
Turning right: Move the cursor keys downwards.
Turning left: Move the cursor keys upwards.
Category
All Services
All Types
1
BBC 1
2
BBC 2
3
ITV 1
4
Chan...
19:30~20:00 Emmerdale
20:00~21:00 Coronation Street
Use PAGE
to browse through the TV Guide list.
The Bill
21:00~22:00
22:00~22:30 Action News on BBC1
Magnum P.I.
Jump ahead 24 hours:
!
22:30~23:30
Press the Green button to jump ahead by one day.
23:30~00:30 Miami Vice
00:30~01:30 Late Night News
Jump back 24 hours:
!
01:30~01:45 Preview - The Cinema Magazine
Press the Red button. You can only jump back to the current date.
-24 Hr
SELECT
+24 Hr
TIMER REC
RETURN Guide
Category
Prog.Type
v
Page +
Changing Stations in Portrait View
!
Page –
Change Display Mode
v
Use to select a station.
To see the current programme press ENTER.
!
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Guide
TV Guide: Landscape
Wed 13/05/05 10:45
Prog.Type
Selecting the programme from Prog. Type in the TV Guide
Category
All Services
Movies
Wed 13th
!
Press GUIDE to open the TV Guide.
All Types
19:00~20:30 Hot Wars
Movies
Time:
BBC 1
BBC 2
ITV 1
19:30
20:00
20:30
News
The Programme Type function lets you display a TV Guide list sorted by programme types
(e.g. Movies, Sports).
1
2
3
4
5
6
7
Easten... D.I.Y. SOS
Hot Wars
Entertainment
Holiday P
Sports
Children's
Emmer... Coronation Street
Chan...
Five
Scrapheap Chall... Pepsi Ch
!
Education
Lifestyle
Press the Blue button to display the list of programme types.
News
Sex and the City
!
ITV 2
Me out of here !
Pop Idol
Use to select the desired programme type.
You may choose between:
Drama
S4C
Rugby 15 to 1
Category
Prog.Type
All Types, Movies, News, Entertainment, Sports, Children's, Education, Lifestyle, Drama.
Make your selection (e.g. Movies) and press ENTER.
ENTER
SELECT
RETURN
!
Tue 12/05/05 10:45
Prog.Type
TV Guide: Portrait
Wed 13th
Category
The programme guide is modified according to your selection.
All programme data is displayed in Landscape View. The inapplicable data is greyed out.
Only the programmes that match your selection are displayed in Portrait View.
All Services
Movies
1
BBC 1
Wed 12th: 21:30~23:00
Tue 13th: 20:00~21:00 Coronation Street
The Bill
2
BBC 2
3
ITV 1
4
Chan...
Predator
21:00~22:00
Fri 14th 18:00~19:30 They Think it's Over
!
20:00~21:45
Rambo 2
Use to go through the TV Guide list.
To exit the list, press RETURN.
!
Category
Prog.Type
-24 Hr
SELECT
+24 Hr
TIMER REC
RETURN Guide
v
Page +
Page –
Change Display Mode
v
Wed 13/05/05 10:45
Prog.Type
Selecting the programme from Category in the TV Guide
TV Guide: Portrait
Wed 13th
Category
PROFILE 1
All Types
!
Press GUIDE to open the TV Guide.
All Services
BB
Free TV
1
BBC 1
2
19:30~20:00 Emmerdale
Radio
20:00~21:00 Coronation S
PROFILE 1
The Category function lets you display a TV Guide list sorted by main category (e.g. Free
TV, Radio).
The Bill
21:00~22:00
PROFILE 2
22:00~22:30 Action News
ILE 3
PROFILE 4
PR
O
F
In an edited profile, you can compile and sort the stations that you prefer to watch.
You can only select the categories PROFILE 1 through PROFILE 4 if you have edited
them first.
Magnum P.I.
22:30~23:30
23:30~00:30 Miami Vice
00:30~01:30 Late Night News
01:30~01:45 Preview - The Cinema Magazine
Category
42
Prog.Type
v
SELECT
VIEW
Page +
RETURN Guide
Page – v
Change Display Mode
!
Press the Yellow button to display the list of main category.
!
Use to select the desired main category.
You can choose between:
Tue 12/05/05 10:45
Prog.Type
TV Guide: Portrait
Wed 13th
Category
PROFILE 1
All Types
1
BBC 1
2
BBC 2
All Services, Free TV, Radio, PROFILE 1, PROFILE 2, PROFILE 3, PROFILE 4
19:30~20:00 Emmerdale
!
!
!
Use
Use
to make your selection (e.g. PROFILE 1) and press ENTER.
to go through the TV Guide list.
20:00~21:00 Coronation Street
The Bill
21:00~22:00
22:00~22:30 Action News on BBC1
Magnum P.I.
To exit the list, press RETURN.
22:30~23:30
23:30~00:30 Miami Vice
00:30~01:30 Late Night News
01:30~01:45 Preview - The Cinema Magazine
If you change the Category in the TV Guide, the selected Category is also retained after
you exit the TV Guide.
-24 Hr
SELECT
+24 Hr
TIMER REC
RETURN Guide
Category
Prog.Type
v
Page +
info
Page – v
Change Display Mode
If you disconnect the unit from AC mains or switch to standby in Quick Start [Off] mode,
the programme information data is cleared and need to be reloaded after Power ON.
This DVD Recorder is for viewing and recording free to view channels only, not pay
TV or encrypted channels.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Discs
Handling Discs
If the surface of a disc that does not have or was removed from a cartridge is damaged,
scratches, dirt, dust or fingerprints can compromise the recording, editing or playback.
Such damage can also occur when the disc is inserted back into the cartridge.
Cleaning the DVD-RAM
Clean the disc with a special DVD-RAM cleaner (optional) and read
the cleaner instructions throughly before use.
Only play round discs.
Cleaning DVD-Videos, Video CDs and CDs
If the disc is dirty, wipe it with a moist and then a dry cloth.
Bad scratches and stubborn dirt may not be able to be removed so that
recording, editing or playback is still compromised even after cleaning.
The disc should then no longer be used. Do not use benzine, alcohol,
water, cleaning sprays, household cleaners or other solvents.
Do not touch the recording
surface of the disc.
DVD lens cleaner Compatible models
Only for Panasonic`s DVD recorders. Do NOT use this cleaner with any other Panasonic
DVD products or with the DVD products of any other companies since doing so may
damage the products.
Place the disc in the tray with the label facing upwards.
With double-sided discs, place the side that you want to play, with the label facing up.
Note:
Only the label side of the disc may be written on. Use a soft oil-based felt pen.
Do not use a ball-point pen or other hard writing instrument. Do not affix any
stickers or labels to the disc. The disc can warp and may become unusable.
When not in use, place the disc in its jewel case or cartridge
so that it does not become scratched or dirty.
Do not drop the disc, place them on top of each other
and never bang them. Do not place anything on top of the disc.
Protect the disc from dirt, dust, heat, humidity, direct sunlight or
strong temperature fluctuations (since condensation water can form).
PROTECT
Cartridge
Disc formats
DVD-Video Recording Format (VR)
This format enables the free editing of recordings. Digital programmes that allow "one time
only recording" can be recorded once on a CPRM-compatible DVD-RAM. Playback is only
possible on compatible units.
RAM Cartridge discs
When the write-protection device is
activated, you can neither record nor
edit or delete the contents of a disc.
DVD-Video Format (V)
This format corresponds with the commercially available DVD-Video.
Recordings made with this unit must be finalised in order to be played back on a
DVD player.
Digital programmes that allow "one time only recording" can not be recorded.
The DVD-Video format can be recorded on DVD-R or DVD-RW.
Cartridge write protection
Remove 8cm discs from the
cartridge before you use them
on the unit.
RAM
CPRM (Content Protection for Recordable Media)
This unit is compatible with the copy-protection system CPRM for writable media.
When using a CPRM-compatible disc, a digital programme can be recorded one time.
Programmes broadcast with this copy-protection system cannot be recorded on DVD-R or
2.8GB DVD-RAM.
Regional codes (DVD-Video only)
DVD-Videos with the regional code 2 or ALL can be played with this unit.
The code is listed on the backside of the unit.
England and Continental Europe: 2.
This DVD Recorder is for viewing and recording free to view channels only, not pay
TV or encrypted channels.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc formats
RAM
RAM
The disc can only be played back on DVD-RAM-compatible players.
You can use the playback and the DIRECT NAVIGATOR while the unit is in timer-
standby mode.
-R -RW(V) +R
After the recording is complete, it takes approx. 30 seconds for the unit to finish
the recording information. The first 30 seconds of a recording may be missing if you
perform several TIMER-controlled recordings in a row.
Discs recorded with
PAL or NTSC signals:
In order to playback a DVD-R, DVD-RW (DVD-Video format) or +R recorded using this unit
on another unit, the disc may need to be finalised.
The disc may also not be able to be played back on other units even after finalising.
TV type
Disc
PAL
Yes/No
Yes
New or previously used (e.g. in computers) DVD-RAMs or DVD-RWs may need to
be formatted before recording with this unit.
49
Multi-system TV
NTSC
PAL
Yes
No
NTSC-TV
PAL-TV
NTSC
PAL
Yes
This unit cannot play discs that contain PAL and NTSC signals. Discs that were recorded
on another unit with PAL and NTSC signals may not be able to be played back.
Yes
Yes (PAL60)
NTSC
Discs that cannot be played back:
Some DVD-R; DVD+R; DVD-R DL; DVD+R DL; DVD-RAM (2.6 GB/5.2 GB); DVD-ROM; CD-ROM; CDV;
SVCD that do not conform to IEC62107; SACD; MV-Disc; PD; Photo CD; DivX Video Disc, Blu Ray etc.
The playback of non-standard video CDs is not guaranteed.
Before playback
Due to the disc programme structure set by the manufacturer, not all described functions may be able to be used.
Depending on the disc type, the regional code and the recording conditions, it may not always be possible to play the discs listed.
Playback and recording discs
4.7GB / 9.4GB, 12cm
2.8GB, 8cm
rewritable
TIME SLIP function, CPRM compatible, supports 2 channel sound, 16:9
format,creation of playback lists, deleting individual titles frees up storage space
RAM
DVD-RAM
4.7GB, 12cm
1.4GB, 8cm
writable
unfinalised
finalised
DVD-R
(DVD-Video format)
-R
DVD-V
+R
unfinalised
finalised
4.7GB, 12cm
writable
+R
DVD-V
-RW(V)
DVD-V
unfinalised
finalised
DVD-RW
(DVD-Video format)
12cm / 8cm
rewritable
Playback discs
12cm / 8cm
playback only
DVD-V
DVD-Video
DVD-Audio
High-quality video and music discs.
12cm / 8cm
playback only
Music discs in digital quality. Playback in 2-channel sound.
DVD-A
-RW(VR)
DVD-V
DVD-RW
(DVD-VR format)
12cm / 8cm
playback only
Unfinalised CPRM compatible discs with "one time only recorded"
recording. Recorded on another DVD Recorder.
12cm / 8cm
playback only
Recorded on another DVD Recorder.
The disc must be finalised eventually.
+RW
12cm / 8cm
playback only
Music and audio recordings.
Audio CD
CD-R/RW
CD
12cm / 8cm
playback only
Music in MP3 format, pictures in JPEG and TIFF format.
Max. 999 titles / 99 groups.
12cm / 8cm
playback only
Video CD, SVCD
CD-R/RW
Music and video recordings.
SVCD conforming to IEC62107.
VCD
DIGITAL VIDEO
SUPER VIDEO
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Switch the unit on.
PLAY/x1.3
Playback
!
Press OPEN/CLOSE to open the disc tray.
Place the disc in the disc tray.
!
!
Press PLAY .
The disc tray is closed and playback begins.
The reading of the disc may take some time!
-R -RW(V) +R -RW(VR)
RAM
Playback begins with the last recorded title.
Playback begins at the beginning of the disc.
VCD CD
DVD-A DVD-V
PAUSE
PAUSE during playback
!
!
Press PAUSE during the playback.
Press PAUSE again to resume playback.
STOP
Cancelling playback
-R -RW(V) +R -RW(VR)
DVD-A DVD-V
RAM
VCD CD
!
!
Press STOP during the playback.
A Screen appears on TV.
Press STOP again to watch TV
via the unit's tuner.
Press STOP during the playback
to watch TV via the unit's tuner.
!
Resuming playback
!
Press STOP during the playback.
The unit saves the position.
The position is deleted if you switch the unit off.
!
!
Press PLAY to resume playback from the saved position.
To cancel the function, press STOP several times.
A menu appears on the television screen
VCD
!
Use the numeric buttons to select an entry.
1
0
5
5
e.g.: number 5:
+
or number 15:
+
!
DVD-A DVD-V
Use
or the numeric buttons to select an entry and confirm with ENTER.
If
appears on the television screen, this function is not possible at the moment.
The operation of the disc menu depends on the inserted disc. If you launch the main menu
with TOP MENU, another menu may appear than when you press SUB MENU.
!
Use the numeric buttons or
to select the desired entry and confirm with ENTER.
Title
Menu
Title
Menu
Title
Menu
Disc-TOP MENU
SUB MENU
TOP MENU
Direct playback
Starting the playback from a selected Title, Chapter or Track.
!
During playback, use the numeric buttons to select the desired entry.
0
5
1
5
0
0
5
0
1
5
MP3 JPEG
5:
+
15:
+
5:
+
+
15:
+
+
DVD-A
While the screensaver is displayed, you can enter a group number.
This function is not available for some discs if playback is stopped.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
-R -RW(V) +R -RW(VR)
RAM
Selecting programmes/titles for playback
DIRECT NAVIGATOR TITLE VIEW
DVD RAM
07
You can display the menu during playback, recording and in stop mode using the DIRECT
NAVIGATOR button.
BBC1 12/ 9 THU
!
Press DIRECT NAVIGATOR.
!
Use to select the desired title and confirm with ENTER.
Press RETURN to exit the menu.
Page 02/02
Previous
Next
Previous
!
ENTER
S
Next
SUB MENU
Select
RETURN
You can select other pages using SKIP
Previous or
Next.
SLOW/SEARCH
CD
Not
Slow-motion playback
!
!
!
Press SLOW/SEARCH
Speed can be controlled in 5 stages.
Press PLAY to resume normal playback.
,
in pause mode.
-R -RW(V) +R
RAM
VCD
The pause function is automatically switched on after 5 minutes.
DVD-A
Only for forwards direction.
Only motion pictures
Fast forward/rewind
!
Press SLOW/SEARCH
As long as the button is pressed, the search speed increases in 5 stages.
,
during playback.
!
Press PLAY to resume playback.
You can change the search speed also by turning the Smart Wheel.
-R -RW(V) +R
MP3 CD
RAM
Sound is only output at the first fast-forward speed.
DVD-A
In the case of DVD-Audio (except motion picture parts), CD and MP3, sound is
output in all speed levels.
SKIP
Skipping chapters, titles or pictures
!
Press SKIP
,
during playback or pause to skip chapters, titles or pictures.
CD
Not
Single-frame playback
!
!
Press
,
in pause mode.
Each press of the button shows the next or the previous frame.
Press PLAY to resume playback.
VCD
Only for forwards direction.
DVD-RAM
PLAY x1.3
RAM
Quick View (Play/ x1.3)
Increase playback speed without negative effects on sound.
!
Press and hold PLAY during playback.
Press PLAY again to return to normal playback speed.
!
Output takes place in PCM with a digital connection.
Quick View is cancelled if SKIP
programme begins that was not recorded with Dolby Digital.
,
or PAUSE is pressed or playback of a
Quick View does not function during simultaneous recording and playback in XP or FR
mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
CREATE
CHAPTER
RAM
Splitting a recording into chapters
!
Press CREATE CHAPTER during playback.
During playback press
SKIP or SKIP
to skip the chapter.
MANUAL SKIP
MANUAL SKIP
!
Press MANUAL SKIP during playback.
The playback jumps ahead approximately 30 seconds.
TIME SLIP
-R -RW(V) +R -RW(VR)
RAM
TIME SLIP
!
Press TIME SLIP.
Use
!
to select the time that the playback should jump forward or back.
If you press and hold the buttons, the time span increases or decreases minute-by-minute.
If you hold the button, it increases or decreases in 10-minute units.
Press ENTER to confirm the selected time.
!
!
Press PLAY to hide the picture in picture.
The TV picture is shown as picture-in-picture.
PLAY
0 min
Playback picture
BBC1
Currently received picture (receive channel).
The receive channel can be switched using
the CH
This is not possible during a recording.
,
button.
PLAY
0 min
Playback started 30 seconds ago.
Image currently being recorded.
REC
RAM
Delayed playback
Playback can be started while the unit is still recording.
Without stopping the current recording, you can view the recording from the beginning.
!
Press STOP to end the playback.
After 2 seconds, press STOP again to stop the recording.
Use TIMER to stop a TIMER-controlled recording.
!
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 playback
No.
CD (MP3)
Group
MENU
1
: Set Me Free
G
1
1
This unit can play MP3 files that were recorded with a computer on a CD-R/RW.
Files are captured as tracks and folders as groups.
“TOTAL” includes all tracks in all groups of the disc.
Track
Tree
Total
1
T
TOTAL
01- Father
1/ 12
2
01- Have your Way
01- Holy Spirit
01- Latter Rain
01- Love Of Heaven
01- Niemals
3
4
5
6
7
8
9
No.
--
0
9
Prev.
Next
01- Only Truth
!
Use DIRECT NAVIGATOR to launch the MENU screen.
01- The Song Of The Lord
01- Never
SELECT
!
Use
Playback continues until the last track of the selected group.
to select the desired track and confirm with ENTER.
10 01- We Seek His Face
Page 001/002
ENTER
RETURN
0
0
8
To select a track via the numeric buttons, press e.g. for track no. 8:
.
!
Use DIRECT NAVIGATOR or RETURN to exit the MENU screen.
Use SKIP
After all tracks in a group have been displayed, the next group is listed.
,
to select other tracks/groups or pages.
Tree
MENU
G
T
1
1
G
1/ 1
MP3
TOTAL
1/ 12
Jason Upton
Freedom
Hillsongs
Power Of Love
I Believe
Selecting a group using the tree structure
!
After selecting a track in the file list, press .
The tree structure appears on the screen.
No.
0
9
--
Third Day
Holy
!
Use
Use
to select the desired group.
to switch between different levels in the screen of the tree structure.
Michael W. Smith
Amazing Grace
SELECT
ENTER
!
!
!
RETURN
Confirm with ENTER. The selected group is displayed in the file list.
to select the desired track and confirm with ENTER.
Use
Shows the track currently being played.
Group number
Track number in the group
G :
T:
TOTAL: Selected track number / Total number of track numbers
No.: Selected group number
Group: Selected group name
Notes on JPEG/MP3 format
!
The discs must correspond with the formats ISO 9660 Level 1 or 2 and Joliet.
Compatible compression rate: between 32 kbps and 320 kbps
Compatible scan rate: 44.1 kHz and 48 kHz
Maximum number of recognisable Tracks and groups:
999 Tracks and 99 groups
!
!
!
!
!
The device is not compatible with ID3-Tags or Packet Writing.
If there are a lot of still images or Sessions, the readout and playback of the disc
can take some time.
Root
001 (Folder=Group)
001 track .mp3 (Files=Tracks)
002 track .mp3
003 track .mp3
002 Group
001 track .mp3
002 track .mp3
003 track .mp3
Playback sequence
Notes on pictures (JPEG, TIFF)
Compatible formats: DCF* compatible (material recorded with a digital camera, etc.)
* Design rule for Camera File system: uniform standard of the Japan Electronics and
Information Technology Industries Association (JEITA).
File format: JPEG, TIFF (uncompressed RGB chunky format).
Number of pixels: 34x34 through 6144x4096 (sub-scanning 4:2:2 or 4:2:0).
The unit can process up to a maximum of 999 files and 99 folders (including higher folders).
If TIFF-format pictures are to be played back or if there are a lot of files and/or folders, the
procedure can take quite some time. Some files may not be able to be displayed or played
back. MOTION JPEG is not supported.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG playback
CD (MP3/JPEG)
FUNCTIONS
JPEG - MP3 Disc
CD(MP3/JPEG) JPEG Playback mode
The following information on the file type appears at the beginning:
Playback mode is set to MP3.
Select "JPEG" from MENU in FUNCTIONS if you play pictures ( JPEG ).
enu
Playback
MENU
EPG
Recording
TV Guide
TIMER RECORDING
VIDEO Plus+
MENU
2
3
!
Confirm the information with ENTER.
Press FUNCTIONS and confirm MENU with ENTER.
Select file type.
!
MP3
To Others
JPEG
ENTER
RETURN
!
Use
to select the desired file type and confirm with ENTER.
ENTER
RETURN
Displaying the picture properties
13:30:49 21/ 6
No. 1 / 22
Date 16/11/2004
!
Select the desired picture and press ENTER.
Press STATUS twice.
Press STATUS again to exit the display.
!
CD (JPEG)
!
CD (JPEG)
!
Press DIRECT NAVIGATOR. The PICTURE (JPEG) VIEW appears on the screen.
Use to select the desired picture and start picture playback using ENTER.
Use STOP or DIRECT NAVIGATOR to return to PICTURE (JPEG) VIEW.
!
!
0
0
8
To select a picture using the numeric buttons, press e.g. for picture no. 8:
.
Rotating pictures
!
JPEG Menu
CD(JPEG)
Folder
PICTURE (JPEG) VIEW
DISC
Press SUB MENU during playback.
In the sub menu, use to select the desired setting and confirm with ENTER.
Use STOP or DIRECT NAVIGATOR to return to PICTURE (JPEG) VIEW.
002
003
004
001
!
!
Previous
Page
Rotate RIGHT
Rotate LEFT
Zoom in
ENTER
Zoom in / Zoom out (Only for pictures smaller than 640 x 480 pixels)
S
SUB MENU
RETURN
!
Press SUB MENU during playback.
In the sub menu, use to select [Zoom in] and confirm with ENTER.
To switch back to the original size, confirm [Zoom out] with ENTER in the sub-menu.
!
ENTER
RETURN
!
Selecting a Folder
!
In PICTURE (JPEG) VIEW, use
If you confirm [Folder] with ENTER, you can use
to select [Folder].
in the following menu to select the
desired Folder and confirm with ENTER.
Slide Interval
!
Press SUB MENU.
!
Use
Use
to select [Slide Interval] and confirm with ENTER.
to select the display duration of the individual pictures in the Slide Show.
!
!
Confirm with ENTER.
Start Slide Show
Start Slide Show
Slide Interval
!
Press SUB MENU again and confirm [Start Slide Show] with ENTER.
The pictures in the folder are displayed in the selected interval.
The Slide Show stops after the last picture.
Use STOP or DIRECT NAVIGATOR to return to PICTURE (JPEG) VIEW.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
-R -RW(V) +R
RAM
You can record up to 99 titles on one disc (+R: 49 titles).
49
53
If you use an unformatted DVD-RAM, you must format it before the first recording.
The recording is saved in free areas on the disc. If there is no more space left on the
target drive, you must delete recordings or use a new disc.
When recording dual-channel or multi-audio TV programmes on DVD-R, DVD-RW
or +R, only one audio channel can be recorded.
Please select the desired audio channel in advance.
RAM
If you have activated the write-protection, cancel it.
Recording television programmes
!
Use CH
,
or the numeric buttons to select the TV channel.
!
!
!
Use INPUT SELECT to select the AV channel for externally connected devices.
Press REC MODE to select the recording mode.
Press REC to start the recording.
!
Press STOP to stop the recording.
Up until the recording is stopped, it counts as 1 title. After recording to disc is complete, it takes
some time for the unit to process the information for device control.
-R -RW(V) +R
RAM
You can only change the channel or the record mode in pause mode.
The material is then recorded as a separate title.
Pause during recording
!
Press PAUSE to pause the recording.
Press PAUSE again to resume recording. The title is not divided.
!
One touch recording (OTR)
!
During record, press REC on the unit to set recording time (up to 240 minutes).
The unit display changes with each press of the button:
Counter
OFF 30
60
90
120
180
240
This is not possible with FLEXIBLE REC or TIMER-controlled recordings.
Counter
If you press STOP , the recording will be stopped and the time setting deleted.
DIRECT TV REC
Direct TV recording
If your television is equipped with analogue tuner and Q Link functionality, you can directly
record the programme that you are watching on TV. The programme position shown on the
unit automatically switches to the appropriate TV programme.
!
Press DIRECT TV REC for 3 seconds. The recording begins.
Press STOP to end the recording.
!
If the station transmits teletext information and the Title Page is set properly, the programme
and station names are recorded automatically. Launching the titles with this unit can take
approx. 10 minutes and may fail in some cases.
Q Link
If you have an IDTV with EPG (electronic programme guide) function for digital broadcast,
you can perform timer recording using the EPG function. Refer to the televisions operating
instructions for further informations.
Playback during recording RAM
During recording, you can start playback from the beginning of the programme.
!
Press PLAY during the recording or TIMER-controlled recording.
The playback can only begin if at least 2 seconds have passed since the start of the recording.
DIRECT NAVIGATOR TITLE VIEW
DVD-RAM
RAM
Simultaneous recording and playback
!
01
02
03
Press DIRECT NAVIGATOR during the recording or TIMER-controlled recording.
Use to select a title and confirm with ENTER.
Press DIRECT NAVIGATOR without selecting a title again to exit the title view.
!
BBC1 23/9 THU
ITV 1/10 FRI
BBC1 23/9 THU
04
!
ITV 1/10 FRI
Previous
Page 01/01
Next
If you start the playback while the unit is in standby mode for a TIMER-controlled recording,
the recording will begin at the programmed time.
Current recording
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording modes and approximate recording times in hours
DVD-RAM
DVD+R
DVD-RW
DVD-R
Single-sided Double-sided
(4.7GB)
XP
(9.4GB)
(4.7GB)
SP
When recording on DVD-RAM in EP mode
(8 Hours), playback may not be possible
on DVD-RAM-compatible DVD players.
In this case, select EP mode (6 Hours).
XP (High quality)
SP (Normal)
LP (Long play)
EP (6 Hours)
1
2
4
6
1
2
4
6
2
4
LP
8
EP (6 Hours)*
EP (8 Hours)
Recording duration
44
12
EP (8 Hours)
8
16
8
* Only if the Recording time in EP mode setting
in the SETUP menu is set to [EP (6Hours)].
-R -RW(V) +R
Selecting an audio channel to be recorded in two-channel sound
!
Analogue channels: In the Sound SETUP menu, select the Bilingual Audio Selection
[M1] or [M2] setting.
!
Digital channels: Select the desired channel in the DISPLAY menu under [DVB Multi
Audio].
-R -RW(V) +R
RAM
FLEXIBLE REC (FR)
FLEXIBLE REC
Recording in FR mode.
The unit calculates the best possible recording quality between XP and EP. It is adjusted to
fit the space available on the disc. This function is not possible during an EXT LINK recording.
Maximum rec. time
Set rec. time
1 Hour 49 Min.
1 Hour 49 Min.
!
Cancel
Start
In stop mode, press FUNCTIONS.
!
Use
Use
Use
Use
to select [To Others] and press ENTER.
to select FLEXIBLE REC and press ENTER.
SELECT
!
!
!
!
RETURN
or the numeric buttons to select the required recording time.
to select [Start] and confirm with ENTER. The recording begins.
Press RETURN to exit the FLEXIBLE REC window.
DVD-RAM
!
REC 83
BBC1
The available time in minutes.
Press STOP to cancel the recording before the end has been reached.
Neither the channel nor the recording mode can be changed in PAUSE mode.
Displaying the available recording time
!
Press STATUS several times.
TIMER-controlled recordings
Options in the TIMER RECORDING menu
Name: Programme position/name of the TV station
Date: You can also programme titles to be recorded on a daily or weekly basis.
Start: Start time / Stop: Stop time
Remain
12:09:37 18/11 THU
1:58 SP
TIMER
RECORDING
Name
Date
Start
:
Stop
:
Mode STTL
If you press and hold the
increments.
buttons, the time increases/decreases in 30-minute
SP
ON
.
.
----
Programme Name
Mode: Recording mode (XP, SP, LP, EP, FR)
STTL: Subtitles [ON] or [OFF]
Recorded subtitles cannot be switched off later.
For digital channels PDC cannot be selected.
PDC: [ON] or [---]
Please set Channel.
ENTER
RETURN
0
9
No.
TIMER RECORDING menu for
digital channel
ON : The station transmits PDC signals. You must set the timer to the time
specified in the TV magazines.
- - - : The station does not transmit PDC signals. Try to set the start and stop
time such that the entire film can be recorded even if a programme begins
or ends earlier or later than planned.
Remain
1:58 SP
12:09:37 18/11 THU
TIMER
RECORDING
Name
Date
Start
:
Stop
:
Mode PDC
SP
ON
.
.
For analogue channels STTL cannot be selected.
If you selected PDC [ON] recording mode FR is not possible.
Programme Name: You can enter the title of the programme.
----
Programme Name
34
Please set Channel.
ENTER
RETURN
0
9
No.
TIMER RECORDING menu for
analogue channel
PDC function
Programme Delivery Control adjusts the start and stop time of a timer recording
automatically to ensure the recording starts and finishes in line with the programme
broadcast.
This is useful when a programme over-runs the published times.
The station must be transmitting PDC and the exact time must be set for PDC to work.
The DVD Recorder detects whether a station is transmitting PDC only during the tuning
process. If PDC is introduced or discontinued by a station you will need to re-tune the DVD
Recorder before it becomes aware of this.
PDC transmissions are not currently nation-wide so please check with your local
broadcaster for more information.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER-controlled recordings
PROG/
CHECK
Manual programming
Remain
12:09:37 18/11 THU
1:58 SP
TIMER
RECORDING
Disc
space
STTL
PDC
No. Name Date Start Stop Mode
!
!
!
!
01 BBC1
02 ITV
0:00
18/11 THU
0:30
SP ON
SP ON
!
!
Press PROG/CHECK. The TIMER RECORDING screen appears.
Confirm the highlighted line with ENTER.
18/11 THU 10:00 11:30
New Timer Programme
Use
Use to switch to the next field and change entry using
Name, Date, Start and Stop can also be entered using the numeric buttons.
to select the name of the TV station.
.
Press ENTER to store new programme.
ENTER
RETURN
CANCEL
!
34
If you want to enter the programme name, use
and confirm with ENTER.
to select [Programme Name]
Remain
12:09:37 18/11 THU
1:58 SP
TIMER
RECORDING
!
!
!
Once you have made all changes, save the programme with ENTER.
To continue programming, select [New Timer Programme].
Press TIMER to switch the unit to TIMER standby mode.
The symbol lights up in the unit display.
Name
Date
Start
Stop
8:50
Mode
STTL
1
BBC1 18/11 THU 7:50
SP ON
BBC1
Programme Name
!
To cancel or pause the recording, press
TIMER again.
Press ENTER to input a programme name.
ENTER
RETURN
CANCEL
RAM
If you record several programmes in a row, the first few seconds of the following
programme are not recorded on the disc,
-R -RW(V) +R approx. 30 seconds.
Reminder
Reminder
A Timer Recording will start in
a few seconds. Press TIMER button
to record or RETURN button to cancel.
If you enter a TIMER programming and do not switch the recorder to TIMER standby
because you want to watch a television programme, then you will be reminded of the
pending start 1 minute before the recording starts.
!
Press TIMER if you want to start the timer recording.
Press RETURN if want to cancel the timer recording.
!
Even if you forget or don't want to press TIMER to switch to TIMER standby, the recorder will start recording.
You have to press RETURN for cancelling the timer recording.
PROG/
CHECK
Checking, changing or deleting TIMER RECORDINGS
!
Press PROG/CHECK.
Use
!
to select the TIMER RECORDING.
Checking or changing
TIMER
RECORDING
Remain 1:58 SP
Check the settings or correct them if necessary using ENTER
and . Confirm your changes with ENTER.
Programmes that are currently being recorded cannot be changed.
12:09:37 18/11 THU
STTL
Disc
space
No.Name Date Start Stop Mode
01 BBC1 MON-SAT 8:00
02 ITV
03 CH4 18/11 THU 10:30
PDC
8:30
SP ON
SP ON
SP ON
10.2.
OK
!
18/11 THU 15:00 15:30
11:30
New Timer Programme
Deleting
Delete a programme with CANCEL.
Programmes that are currently being recorded cannot be deleted.
[Chan. Name] CH4
[Prog. Name] The best movie selection: "Gone with the wind"
ENTER
CANCEL
RETURN
If you selected PDC [ON], TIMER-controlled recordings are deleted from the list after two days.
Make sure that the unit is switched to TIMER standby mode.
The symbol lights up in the unit display.
Storage space on the disc
OK:
There is enough storage space available on the disc for the recording.
If PDC is switched on during the recording, then the entire programme will probably
not be recorded.
(Date): For recordings that are made daily or weekly, the display indicates whether there is
enough storage space on the disc.
!:
Is displayed if the disc is not in the unit, is write-protected or does not have enough
storage space.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER-controlled recordings
TIMER RECORDING in the TV Guide
You can select a programme that you want to record in the TV Guide list and transfer it
directly to the TIMER RECORDING menu.
TIMER
RECORDING
Remain 1:58 SP
12:09:37 12/ 5 THU
!
Name
Date
Start
Stop
Press GUIDE to open the TV Guide.
Select the desired programme with
Press ENTER. The TIMER RECORDING menu appears on the screen with the
information on the selected programme.
Name, Date, Start, Stop and Programme Name are taken from the TV Guide.
STTL
Mode
SP
5 Channel5 13/05 Wed 21:00
23:00
OFF
!
in the TV Guide list.
Channel5
Terminator 2
!
Programme Name
Press ENTER to store the programme.
ENTER
CANCEL
!
!
!
RETURN
Use
Use
to select Mode. You can change the recording mode with
to select STTL. You can change the setting with
.
.
28
34
You can manually change Name, Date, Start and Stop of the recording by selecting
them with and changing them using
To manually change the name of the programme you like to record select [Programme
Name] using and press ENTER. The Programme Name screen appears.
After you have changed and set your programme name, the TIMER RECORDING
screen appears again.
Wed13/05/05 19:45
Prog.Type
TV Guide: Landscape
Wed 13th
Category
.
All Services
All Types
19:00~20:00 Emmerdale
Time: 19:30
20:00
D.I.Y. SOS
Holiday Programme Holiday Sport
20:30
21:00 21:30 22:00
Eastenders
Hot Wars
T
News
1 BBC 1
2 BBC 2
3 ITV 1
4 Channel4
5 Channel5
6 ITV 2
7 S4C
Red Cap
ITV News
Show
Emmerdale Coronation Street The Bill
Scrapheap Challenge Pepsi Chart Show
T
Terminator 2
News Eastenders
Scrapheap Challenge Scrapheap...
News
Sex and the City
Me out of here !
Pop Idol
!
!
Press ENTER to save and return to the TV Guide list.
Press TIMER to switch the unit to TIMER standby mode.
T
Rugby 15 to 1
-24 Hr +24 Hr
Category
Prog.Type
The TIMER symbol appears in the display. The TV Guide list can still be launched by
pressing the GUIDE button.
v
SELECT
TIMER REC
RETURN
Page +
Page -
v
GUIDE
Change Display Mode
T
Programmes programmed with TIMER RECORDING have the symbol
TV Guide list.
in the
This programme is
programmed in the
TIMER RECORDING menu.
T
A currently running programme cannot be transfer to the TIMER RECORDING menu with
ENTER. Such programmes can be identified by the changed cursor. It appears as a
yellow frame around the selected entry. If you want to record a programme that is
currently running, launch the TIMER RECORDING menu and perform the entries
manually or press REC.
Encrypted programmes are not marked in the TV Guide. If you record an encrypted
programme, you will only see a black screen with a banner when you replay the
recording.
If you record in a programme which only contains MHEG data, again only a black screen
is recorded.
TIMER
RECORDING
Remain 1:58 SP
12:09:37 12/ 5 THU
TIMER RECORDING from analogue channels
Name
Date
Start
Stop
PDC
Mode
SP
No digital EPG data exists for analogue stations.
A TIMER programming needs to be made manually.
901 BBC 1
13/05 Wed 19:00 20:00
OFF
29
BBC1
Eastenders
Programme Name
Press ENTER to store the programme.
ENTER
CANCEL
RETURN
This DVD Recorder is for viewing and recording free to view channels only, not pay
TV or encrypted channels.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER-controlled recordings
-R -RW(V) +R
RAM
You can programme up to 16 programmes per month in advance.
Remain
1:58 SP
VIDEO Plus+
Insert a disc.
VIDEO Plus+ is not supported for digital channels.
12:09:37 18/ 11 THU
8
5
3
4
2
VIDEO Plus+
Programming recordings with VIDEO Plus+
Enter PlusCode Number by using 0-9 keys.
By entering a VIDEO Plus+ number, the TIMER-controlled recording is easy to set.
The appropriate codes can be found in newspapers and TV guides.
TIMER
Remain
1:58 SP
12:09:37 18/ 11 THU
RECORDING
Name
Date
Start
Stop
Mode PDC
!
Press VIDEO Plus+.
Enter the VIDEO Plus+ number using the numeric buttons.
Use to delete a number.
Confirm the VIDEO Plus+ number with ENTER.
SP
ON
2 BBC2 18/11 THU 15:00
16:00
!
BBC2
Sports News
Programme Name
Press ENTER to store the programme.
!
ENTER
RETURN
0
9
CANCEL
No.
In the TIMER RECORDING screen, check the start and end time and the PDC
signal.
28
34
TIMER
RECORDING
Remain
1:58 SP
If [ ---] is displayed under Name, use
to select the desired programme position.
12:09:37 18/11 THU
STTL
Disc
space
OK
No. Name Date
01 BBC2 18/11 THU 15:00 16:00
New Timer Programme
Stop
Mode
Start
!
PDC
Use
If you selected PDC [ON], recording mode FR is not possible.
,
to select the recording mode. (XP, SP, LP, EP, FR)
SP ON
!
If you want to enter the programme name, use
and confirm with ENTER.
to select [Programme Name]
!
!
!
Once you have performed all changes, save the programme with ENTER.
To continue programming, select [New Timer Programme].
Press TIMER to switch the unit to TIMER standby mode.
The symbol lights up in the unit display.
[Chan. Name] BBC2
[Prog. Name] Sports News
ENTER
RETURN
CANCEL
!
To cancel or pause the recording, press
TIMER again.
VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.
TIMER recording from Sat with VIDEO Plus+
VIDEO Plus+ Codes for Satellite Receivers
This DVD Recorder is not designed to control (switch on or change channel) your satellite
receiver, however, it can be taught to recognise VIDEO Plus+ Codes for Satellite stations.
The Satellite Receiver must be switched on and the correct station selected.
Some receivers have their own timer facility for this purpose.
Remain
12:09:37 18/ 11 THU
1:58 SP
VIDEO Plus+
Please refer to your Satellite Receiver instructions for use of such timer facilities.
For your DVD Recorder to recognise the VIDEO Plus+ Codes for each satellite station, you
must teach your DVD Recorder which channel or AV input to record from for the first time.
Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol will appear in the
channel position indicating that the DVD Recorder does not know which channel position
to set.
8
5
3
4
2
Enter PlusCode Number by using 0-9 keys.
ENTER
RETURN
0
9
No.
Once you have set the channel/AV input the DVD Recorder will remember it whenever you
use a VIDEO Plus+ Code for the station again.
VIDEO Plus+
!
!
Press the VIDEO Plus+ button.
TIMER
Remain
12:09:37 18/ 11 THU
1:58 SP
RECORDING
Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,
e.g. Sky 1 using the Numeric buttons. Press to correct any mistakes.
Name
-----
Date
Start
Stop
Mode
PDC
SP
-----
--/-- ----
15:00
15:00
!
!
Press the ENTER button. [ - - ] will appear instead of a channel number/AV input.
----
Programme Name
Press the CH button to select the channel or AV input that is to be used for recording
from the satellite channel.
Invalid Entry
ENTER
RETURN
0
9
CANCEL
No.
!
!
Press the ENTER button to memorise the setting. The DVD Recorder will now
automatically set the programme position or AV input correctly when a VIDEO Plus+
recording is set for this satellite station in the future.
TIMER
Remain
12:09:37 18/ 11 THU
1:58 SP
Press to select the programme that you have just set. Now press the
CANCEL/RESET button to delete it from the timer recording list. It is no
longer needed.
RECORDING
Name
Date
Start
Stop
Mode
SP
PDC
ON
AV2 26/10 TUE 15:00
AV2
16:00
!
!
Repeat the steps above until you have set and deleted dummy timer recordings for
each of the satellite stations that you will make VIDEO Plus+ recordings from.
Programme Name
Press ENTER to store the programme.
Press RETURN when you have finished.
ENTER
RETURN
0
9
CANCEL
No.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER-controlled recordings
Before TIMER recordings via external devices
SETUP
AV2 Settings
AV2 Input
Ext Link
Video
You control the recording function via an external device (e.g. receiver) using EXT LINK.
Connect the external device with a 21-pin Scart cable to the AV2 socket.
Ext Link 1
Tuning
Disc
Picture
Sound
Display
Adjust the Ext Link function for the connected device.
Ext Link
!
Ext Link 1
Press FUNCTIONS, use
to select [To Others] and press ENTER.
to select SETUP and press ENTER.
to select Connection, to select AV2 Settings and press ENTER.
Connection
Others
Ext Link 2
!
!
!
!
Use
Use
Use
Use
,
to select Ext Link and confirm with ENTER.
to select [Ext Link 1] or [Ext Link 2] and confirm with ENTER.
SELECT
ENTER
RETURN
Ext Link 1:
For digital receivers that send a
special recording control signal, e.g.
the SKY SATELLITE RECEIVER.
TIMER recordings via external devices (EXT LINK)
The programming of the recording must take place on the external device.
The recording begins when a corresponding signal is received from the connected device
and ends when the transmission of the signal is stopped.
Ext Link 2:
External recording control for satellites
or digital receivers (video signal).
!
Press EXT LINK.
Standby mode for TIMER-controlled recordings is activated.
EXT Link lights up on the display.
If the television is connected to the
AV1 connection via the 21-pin Scart
cable, the picture to be recorded
appears on the screen.
If you have activated the External Link Standby mode, remote control functions such
as the TV Guide are not available.
The beginning of the recording may
not be recorded correctly in certain
cases.
Switching off control via the external device
!
Press EXT LINK to end the recording or to switch off the standby mode for the
TIMER-controlled recording. The EXT Link display turns off.
The Ext Link 2 setting cannot be
used if the input signal is in NTSC
format.
Recording from an external device, e.g. a camera
RAM -R -RW(V) +R
Connect the external device to the AV3 input sockets on the front side of the unit.
RAM
If you activated the write-protection, deactivate it.
Choose one of the two connection possibilities.
Connection with S VIDEO cable and audio cable (L/R) produces the best quality.
S VIDEO IN
VIDEO IN L/MONO - AUDIO IN - R
AV3
S VIDEO IN
VIDEO IN L/MONO - AUDIO IN - R
AV3
A
B
A
B
C
Audio/
Video cable
Audio/
Video cable
A
Yellow
(Video)
White (L)
A
B
C
White (L)
S VIDEO cable
B
Red (R)
Red (R)
!
!
!
!
Press REC MODE to select the recording mode.
In stop mode, use INPUT SELECT to select the input channel AV3.
Start the playback on the external device.
Press REC at the point where you want to begin recording.
!
!
Press PAUSE to pause recording. Press the button to resume recording.
Press STOP to stop recording.
This unit cannot record signals from PCs.
Recording of bilingual programmes:
RAM
If [M1] and [M2] are selected on the connected device, you can choose the audio mode
during playback.
-R -RW(V) +R
Select [M1] or [M2] on the connected device. You cannot select the audio mode
during playback. If the output signal of the external device is an NTSC signal, set the TV
system in the SETUP menu to [NTSC].
32
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
You can access the main functions via the FUNCTIONS selection menu.
The illustrations show DVD-RAM menus.
The menu entries can be different depending on the disc or medium. MP3&JPEG
25 - 26
!
Press FUNCTIONS in stop mode.
U
N
!
C
Use
to select a menu and confirm with ENTER.
!
!
!
!
Use
to select an option and confirm with ENTER.
To view the second screen page, use
to select [To Others] and confirm with ENTER.
To return to the first page, use
to select [Return] and confirm with ENTER.
Press FUNCTIONS to exit the selection menu.
DIRECT NAVIGATOR
35 - 37
18 - 19
27 - 32
31
Edit titles and chapters, protect recordings.
Your electronic programme guide
Programme recordings
FUNCTIONS
Playback
DVD-RAM
Disc Protection Off
DIRECT NAVIGATOR
EPG
TV Guide
EPG
Recording
TV Guide
TIMER RECORDING
VIDEO Plus+
2
3
TIMER RECORDING
VIDEO Plus+
To Others
To Others
ENTER
RETURN
2
Programme recordings with VIDEO Plus+
Open the 2nd screen page
3
38 - 40
28
Create and edit playlists.
PLAYLISTS
FLEXIBLE REC
SETUP
FUNCTIONS
Disc Protections Off
DVD-RAM
PLAYLISTS
DIRECT NAVIGATOR
FLEXIBLE REC
Automatic selection of the recording mode.
Change the unit's default settings.
TV Guide
SETUP
DISC MANAGEMENT
TIMER RECORDING
VIDEO Plus +
41 - 48
49 - 50
To Others
Return
ENTER
RETURN
DISC MANAGEMENT
Return
Format and finalize discs, write protection.
Back to 1st screen page
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
Symbols
35
38
29
PLAYLISTS
DIRECT NAVIGATOR
TIMER RECORDING
TIMER
RECORDING
Remain 1:58 SP
12:09:37 18/11 THU
This title is currently being recorded.
The title overlaps other programmes.
STTL
Disc
space
No.Name Date Start Stop Mode
W
PDC
W
F
01 BBC1 19/11 THU 8:00
19/11 THU 8:20
03 CH4 20/11 THU 10:30
8:30
9:00
11:30
SP ON
SP ON
SP ON
OK
!
OK
W
02 ITV
The disc was full or the highest number of titles or scenes was reached so that
the programme could not be recorded.
New Timer Programme
The title is write-protected.
[Chan. Name] CH4
[Prog. Name] The best movie selection: "Gone with the wind"
The television programme was copy-protected so that the programme could not
be recorded.
DIRECT NAVIGATOR TITLE VIEW
DVD-RAM
X
The programme cannot be played back due to damaged data or cannot be recorded
for another reason.
01
02
03
The title is selected.
BBC1 23/9 THU
ITV 1/10 FRI
BBC1 23/9 THU
04
ITV 1/10 FRI
Previous
Page 01/01
Next
(PAL)
(NTSC)
46
The title or the playlist was recorded with a TV system other than that currently
set in the unit. Titles and playlists with these markings cannot be played back.
Switch your TV system to play back these titles/playlists.
Editing several elements
!
Use
to select the desired title and press PAUSE . A tiek appears.
Repeat this process to select other titles.
!
Press PAUSE again to cancel.
RAM
-RW(V) +R
Disc Name
-R
Entering Text
TERRALUNA
-
1
1
2
B
E
H
K
N
Q
U
3
C
F
I
4
5
a
6
b
e
7
c
8
+
/
9
-
0
You can give discs or programmes titles in various menus:
In DISC MANAGEMENT, in DIRECT NAVIGATOR, in the PLAYLIST and when setting
the TIMER-controlled recording.
A
D
G
J
2
3
4
*
=
$
>
]
d
g
f
i
%
h
k
n
q
#
<
[
&
j
m
p
@
_
L
O
R
V
Y
l
5
Erase
Add to List
List Names
o
r
M
P
T
6
7
8
s
{
(
)
-
S
Z
u
x
v
y
}
t
w
z
;
|
W
.
X
,
\
9
0
Set
SELECT
Add to List
ENTER
RETURN
Entering a Disc Name or Title via the Menu
!
TERRALUNA
Add this name ?
Use
to select the desired character and confirm with ENTER.
Add
SELECT
Cancel
!
!
!
!
Use PAUSE to delete a letter.
ENTER
RETURN
If you want to save the name/title in the List Names, press SKIP
Use to select [Add] in the next screen and confirm with ENTER.
If you press STOP , the name/title is saved.
.
Entering a Title via the Numeric Buttons, For Example: the Letter "R"
!
Press [7] to go to the 7th line.
Press [7] twice to select "R" and confirm with ENTER.
!
List Names
01 ASTRA
02 TERRALUNA
Erasing a Disc Name or Title from List Names
!
Use
Use
SKIP to open List Names.
to select the title or name and press SUB MENU.
Erase Name
!
!
!
SELECT
ENTER
RETURN
S
SUB MENU
Confirm [Erase Name] with ENTER.
Use to select [Erase] in the next screen and confirm with ENTER.
Selecting a Disc Name or Title from List Names
!
Use
Use
SKIP to open List Names.
to select the disc name or title confirm with ENTER.
!
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
N
S
DIRECT NAVIGATOR
In DIRECT NAVIGATOR, you can archive, edit or start recordings after selecting a title.
Direct access:
!
DIRECT NAVIGATOR TITLE VIEW
DVD RAM
Press DIRECT NAVIGATOR on the remote control.
The DIRECT NAVIGATOR is displayed.
07
BBC1 12/ 9 THU
Access via the FUNCTIONS menu:
!
Press FUNCTIONS in stop mode.
Confirm DIRECT NAVIGATOR with ENTER.
!
Page 02/02
Previous
Next
Previous
ENTER
S
Next
SUB MENU
Select
Use [Previous] or [Next] to select other pages and press ENTER.
Select the desired title and start playback with ENTER.
RETURN
!
You can also enter the title with the numeric buttons. If you enter a number that is larger than
the total number of the title, then the last title is selected.
Editing is not possible during a
recording.
DIRECT NAVIGATOR TITLE VIEW
Enter Name
Erase
DIRECT NAVIGATOR CHAPTER VIEW
36
Set up Protection
Cancel Protection
Partial Erase
35
SUB MENU
Properties
Edit
SUB MENU
S
Erase Chapter
36
36
S
Create Chapter
Change Thumbnail
Divide Title
Combine Chapters
SUB MENU
Chapter View
S
Title View
37
Editing Titles and Chapters with the SUB MENU
!
Press SUB MENU.
DIRECT NAVIGATOR TITLE VIEW
DVD-RAM
You can access further sub menus with SUB MENU.
01
!
!
!
In the sub menu, use
Use RETURN to go back to the TITLE VIEW.
Press RETURN again to exit the screen.
to select the desired option and confirm with ENTER.
BBC1 12/ 9 THU
Erase
Previous
Properties
Edit
Chapter View
Erase
-R -RW(V) +R
RAM
Erase
When you perform this procedure, the title is deleted and cannot be recovered.
!
Confirm [Erase] with ENTER.
Use to select [Erase] and confirm with ENTER.
TERRALUNA
!
Remaining Time
Corresponding chapter of PLAYLISTS will be erased.
Erase
2:00(SP)
The available recording time may remain the same after erasing short titles.
The recording time on DVD-R/+R remains the same.
Cancel
SELECT
ENTER
RETURN
To edit several elements, use
to select the desired title and press PAUSE
.
RAM -R -RW(V) +R
-RW(VR)
Properties
Properties
Information on the playback list, e.g. time and date, is displayed.
TERRALUNA
No.
01
Time
Rec time
1:02
0:01(SP)
!
Use
to select [Properties] and confirm with ENTER.
Date 13/7/2005
THU
Name BBC1
ENTER
RETURN
Edit
36
37
Chapter View
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
N
S
DIRECT NAVIGATOR
!
Press FUNCTIONS.
Confirm DIRECT NAVIGATOR with ENTER.
Erase
Properties
Edit
!
!
!
In the TITLE VIEW menu, use
Press SUB MENU.
to select the desired title.
Enter Name
Chapter View
Set up Protection
Cancel Protection
Partial Erase
!
In the sub menu, use
to select [Edit] and confirm with ENTER.
RAM
-RW(V) +R
-R
Enter Name
34
Change Thumbnail
Divide Title
The complete name is displayed in the sub menu [Properties].
!
Confirm [Enter Name] with ENTER.
Change or enter the title of the programme.
!
DIRECT NAVIGATOR
DVD-RAM
RAM
Set up Protection, Cancel Protection
!
Set up Protection
Set up title protection.
01
Use
with ENTER.
to select [Set up Protection] or [Cancel Protection] and confirm
Yes
No
BBC1 12/ 9 THU
SELECT
ENTER
!
Use to select [Yes] and confirm with ENTER.
RETURN
To edit several elements, use
to select the desired title and press PAUSE
.
RAM
Partial Erase
DIRECT NAVIGATOR Partial Erase
PLAY
Before you start erasing, make sure that you really want to erase the recordings.
!
01 TERRALUNA
Start
Use
to select [Partial Erase] and confirm with ENTER.
End
Next
Exit
!
!
!
!
At the desired start point, confirm [Start] with ENTER.
At the desired end point, confirm [End] with ENTER.
Confirm [Next] with ENTER.
In the following screen, use to select [Erase] and confirm with ENTER.
After the erase procedure, you can select the next start and end point.
Confirm [Next] again with ENTER.
0:00.35
Start
--:--.--
End
--:--.--
!
!
!
Partial Erase
TERRALUNA
Remaining Time
Use
To exit the menu, use
to select [Erase] and press ENTER.
to select [Exit] and press ENTER.
to jump to the beginning or end of a title.
or TIME SLIP.
2 : 00(SP)
Use PAUSE and SKIP
,
Corresponding chapter of PLAYLISTS will be erased.
You can search for begin and end points with SLOW/SEARCH
,
Erase
Cancel
SELECT
ENTER
You may not be able to detect begin and end points if they are less than 3 seconds apart or if the
recorded picture was a still image. The unit switches to pause, when the end of the track is
reached. The available recording time on the disc may remain the same after the erase process.
RETURN
RAM -R -RW(V) +R
Change Thumbnail
DIRECT NAVIGATOR Change Thumbnail
DVD-RAM
You can select an image to be displayed as a preview in the title view.
!
PLAY
01 TERRALUNA
Change
Use to select [Change Thumbnail] and confirm with ENTER.
Press PLAY to start the playback.
!
!
!
Exit
Press ENTER at the image that you want to display.
Confirm [Exit] with ENTER. The displayed preview is exchanged for this image.
0:00.35
Change
0:00.10
Start play and select the image
of a thumbnail.
Divide Title
RAM
DIRECT NAVIGATOR Divide Title
DVD-RAM
You can divide a selected title. A divided title cannot be recombined again.
!
PLAY
01 TERRALUNA
Preview
Divide
Use to select [Divide Title] and confirm with ENTER.
With SLOW/SEARCH and PAUSE , find the spot where you want to divide
!
!
,
the title and confirm [Divide] with ENTER.
Confirm [Preview] with ENTER. The playback will take place 10 seconds before to
10 seconds after the dividing point.
Exit
0:00.35
Divide
Divide Title
!
!
!
TERRALUNA
Use
Confirm [Exit] with ENTER.
In the Divide Title screen, use to select [Divide] and confirm with ENTER.
to select [Exit] if you want skip the preview.
Once divided, this title cannot be
recombined.
Divide
Cancel
SELECT
ENTER
RETURN
This function cannot be used if the resulting sections are extremely short or if the total
number of the title is more than 99 (DVD-RAM).
A short section of the recording right before the dividing point can be lost.
The divided titles have the same name as the original title.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
N
S
DIRECT NAVIGATOR
Chapter View
!
In the sub menu, use
to select [Chapter View] and confirm with ENTER.
to select the desired title.
to select the desired option in the sub menu
!
!
In the CHAPTER VIEW menu, use
Press SUB MENU, use
and confirm with ENTER.
RETURN
DIRECT NAVIGATOR TITLE VIEW
DVD-RAM
Playing back chapters
!
03
02
01
Press SUB MENU in DIRECT NAVIGATOR.
BBC1 23/9 THU
TERRALUNA
ITV 1/10 FRI
ASTRAL
BBC1 12/9 THU
AUTOMOBIL
!
!
!
Use
Use
to select Chapter View and confirm with ENTER.
[Previous] or [Next] to select additional pages and press ENTER.
Erase
Select the desired chapter and start playback with ENTER.
Properties
Edit
Previous
Next
Chapter View
Editing chapters
!
In the CHAPTER VIEW menu, use
Press SUB MENU.
to select the desired chapter.
!
!
Use
to select the desired option and confirm with ENTER.
DIRECT NAVIGATOR CHAPTER VIEW
DVD-RAM
RAM
03 ITV 1/ 10 FRI
Erase Chapter
!
002
003
004
001
Confirm [Erase Chapter] with ENTER.
Use to select [Erase] and confirm with ENTER.
!
Erase Chapter
Create Chapter
To edit several elements, use
to select the desired title and press PAUSE
.
Previous
Next
Combine Chapters
Title View
RAM
Create Chapter
!
Use
to select [Create Chapter] and confirm with ENTER.
!
!
!
Press ENTER where you want to create the chapter.
Repeat this step to create more chapters.
Use to select [Exit] and confirm with ENTER.
A short section of the recording right before the diving point may be lost.
DIRECT NAVIGATOR CHAPTER VIEW
DVD-RAM
17 ITV 1/10 FRI CARS
Combine Chapters
RAM
Combine Chapters
!
Following Chapter
002
Use
to select [Combine chapters.] and confirm with ENTER.
The selected chapter will be combined with the following chapter.
Use to select [Combine] and confirm with ENTER.
Select Chapter
001
!
Combine chapters.
Combine
Cancel
Title View: Return to TITLE VIEW.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
N
PLAYLISTS
S
You can create and then edit a playlist from your favourite chapters of your recording.
RAM
Insert a recorded disc.
If write protection is activated, deactivate it.
Creating a Playlist
!
Press FUNCTIONS in stop mode.
Use to select [To Others] and confirm with ENTER.
Confirm PLAYLISTS with ENTER.
PLAYLISTS
DVD-RAM
Create
03 ITV
!
1/10 FRI CARS
03
!
!
Source Title
01
Page 01/01
02
04
In PLAYLIST VIEW, use
and confirm with ENTER.
to select the free [Create] field
Source Chapter
Page 001/001
Page 001/001
Chapters in PLAYLIST
Create Chapter
Create Source Chap.
!
In the Create menu, use
Confirm [Create Chapter] with ENTER.
to select the Source Title and press SUB MENU.
!
PLAYLISTS
Create
03 ITV
!
!
In the [Create Source Chap.] Menu, use ENTER to select the chapter sections.
To place an exact chapter marking, use PAUSE to stop the playback.
Use SLOW/SEARCH ,
Use to select [Exit] and confirm with ENTER.
DVD-RAM
1/10 FRI CARS
03
Source Title
01
Page 01/01
02
04
,
, SKIP
, TIME SLIP or
to select the position.
Source Chapter
001
Page 001/001
Page 001/001
002
003
Chapters in PLAYLIST
Adding Chapters to PLAYLISTS
!
In the Create menu, use
[Source Chapter].
Use to select the Source Chapter that you want to add to the playlist
and confirm with ENTER.
Use to select the position where the chapter should be inserted into the
PLAYLISTS and confirm with ENTER.
to select a Source Title and use to go to
!
!
PLAYLISTS
Create
03 ITV
DVD-RAM
1/10 FRI CARS
03
Source Title
01
Page 01/01
02
04
Source Chapter
001
Page 001/001
Page 001/001
002
003
To add another chapter, repeat the steps. Use to select additional Source Titles.
Use RETURN to go back to PLAYLIST VIEW.
If you confirm a selected source title with ENTER, the entire title is saved into the
!
Chapters in PLAYLIST
001
002
PLAYLISTS.
Select / Edit Playlists
!
Press FUNCTIONS.
Use to select [To Others] and confirm with ENTER.
Confirm PLAYLISTS with ENTER.
Use to select a playlist.
You can play the playlist with ENTER.
DVD-RAM
PLAY
!
!
!
!
Erase
Properties
Edit
!
With SUB MENU, the sub menu for editing the playlist appears.
Chapter View
Erase
Erase
!
Confirm [Erase] with ENTER.
Erase PLAYLISTS?
!
In the next screen, use to select [Erase].
An erased playlist cannot be restored.
Confirm [Erase] with ENTER
Erase
Cancel
SELECT
!
ENTER
RETURN
To edit several elements, use
to select the desired title and press PAUSE
.
Properties
Properties
!
No.
02
Date 9/6/2004 WED
Total 0:00.35
Use to select [Properties] and confirm with ENTER.
Information on the playlist, e.g. chapter and date, is displayed.
Chapters 001
SELECT
ENTER
RETURN
39
Edit
Chapter View
40
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
N
PLAYLISTS
S
Edit Playlists
!
Press FUNCTIONS.
Use to select [To Others] and confirm with ENTER.
Confirm PLAYLISTS with ENTER.
Use to select a playlist.
Press SUB MENU
Use to select [Edit] and confirm with ENTER.
In the sub menu, select the desired option.
!
!
!
!
!
!
Erase
Properties
Edit
Create
Copy
Chapter View
Enter Name
Change Thumbnail
Create
!
Confirm [Create] with ENTER.
Please read Creating a Playlist.
38
Copy
Copy
!
Copy PLAYLIST
Use to select [Copy] and confirm with ENTER.
In the following screen, use to select [Copy] and confirm with ENTER.
Copy
Cancel
!
SELECT
To edit several elements, use to select the desired title and press PAUSE
.
ENTER
RETURN
34
Enter Name
If you enter a long name, it is only partially displayed.
Change Thumbnail
You can select an image to be displayed as the preview in TITLE VIEW. The image will be
displayed as the preview for approx. 1 second after the beginning of the title.
PLAYLISTS
DVD-RAM
02
Change Thumbnail
Change
Exit
!
Use
to select [Change Thumbnail] and confirm with ENTER.
0:00.02
Change Start play and select the image
of a thumbnail.
!
!
!
In the Change Thumbnail menu, press PLAY to start the playback.
Press ENTER at the selected spot.
Confirm [Exit] with ENTER.
0:00.02
The displayed preview is exchanged for this image.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
N
PLAYLISTS
S
Edit Chapter
!
Press FUNCTIONS.
Use to select [To Others] and confirm with ENTER.
Confirm PLAYLISTS with ENTER.
In PLAYLIST VIEW, use
Press SUB MENU.
PLAYLISTS
DVD-RAM
PLAYLIST VIEW
!
01
03
02
!
!
!
!
23/ 9 THU 0:30
to select a playlist.
1/10 FRI 0:10
1/10 FRI 0:20
Erase
Use
to select [Chapter View] and confirm with ENTER.
Properties
Edit
Chapter View
!
In CHAPTER VIEW, use
and press SUB MENU.
to select the desired chapter
PLAYLISTS
DVD-RAM
CHAPTER VIEW
03 ITV 1/10 FRI 0:00
002
003
004
001
!
In the sub menu, use
with ENTER.
to select the desired option and confirm
Add Chapter
Move Chapter
Create Chapter
Previous
ext
Combine Chapters
Erase Chapter
Add Chapter
PLAYLIST View
You can create a new chapter from the Source Title.
!
PLAYLISTS
DVD-RAM
Add Chapter
03 BBC1 1/10 FRI TERRALUNA
In the [Add Chapter] menu, use
and press
to select a Source Title
.
Source Title
01
Page 01/01
02
03
04
!
!
!
!
Use
Use to cancel the process.
to select a Source Chapter and confirm with ENTER.
Source Chapter
001
Page 001/001
Page 001/001
Use
and confirm with ENTER.
to select the position where the chapter is to be inserted
Chapters in PLAYLIST
To add another chapter, repeat the steps.
Use to select other Source Titles.
Use RETURN to go back to CHAPTER VIEW.
ENTER
S
SUB MENU
Press RETURN to exit.
RETURN
Move Chapter
!
Use
and confirm with ENTER.
to select the position where the chapter is to moved,
PLAYLISTS
CHAPTER VIEW
03 BBC1 1/10 FRI 0:00
DVD-RAM
002
003
004
001
Add Chapter
Create Chapter
!
Move Chapter
Create Chapter
Press ENTER at the spot where you want to create the chapter.
Repeat this step to create a chapter at another spot.
Combine Chapters
Erase Chapter
Previous
Page 01/01
!
Use to select [Exit] and confirm with ENTER.
A short section of the recording right before the dividing point can be lost.
PLAYLIST View
For quick editing
PLAY LIST
DVD-RAM
Create Chapter
Use PAUSE
Find the start and end points with SLOW/SEARCH
and SKIP
,
to jump to the start or end of a title.
or TIME SLIP.
PLAY
01
,
Create
Exit
0:00.35
Combine Chapters
!
In the next screen, use to select [Combine] and confirm with ENTER.
The selected chapter is combined with the next chapter.
Combine Chapters
Selected Chapter
Following Chapter
002
001
Erase Chapter
!
Combine chapters.
In the next screen, use to select [Erase] and confirm with ENTER.
The original title is not erased by erasing the chapter.
Combine
Cancel
SELECT
ENTER
To edit several elements, use
to select the desired title and press PAUSE
.
RETURN
PLAYLIST View: Return to PLAYLIST VIEW.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
!
!
Press FUNCTIONS in stop mode.
Use
Use
to selec t [To Others] and confirm with ENTER.
to select SETUP and confirm with ENTER.
!
!
!
!
Use
Use
Use
to select the desired sub menu and use to switch to setting.
to select the desired setting and confirm with ENTER.
to select the desired option and confirm with ENTER.
Follow the menu navigation. The unit saves your settings.
!
!
Use to return to the sub menu and use RETURN to exit the menu.
Use FUNCTIONS to return to the FUNCTIONS menu.
Menu navigation in the SETUP menu
ENTER
Tuning
Manual
Setting
Sub menu
!
Press ENTER to
edit or confirm the
selected option
!
Select the settings
!
To the settings
!
Select the sub menu
Sub menu
Options
Settings
SETUP
Remote Control
Clock
DVD 1
Owner ID
Tuning
Quick Start
On
Disc
System Update
Shipping Condition
Default Settings
Picture
Sound
Display
SELECT
TAB
Connection
Others
RETURN
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
SETUP
Tuning
Creating profiles
Edit Profiles
ENTER
Edit Profiles
Auto-Setup Restart
Digital
Tuning
Disc
Add New DVB Service
Edit Profiles
You can create four different profiles, in which you can sort and save your desired
channels for the TV GUIDE.
All Services
Picture
Sound
Display
PROFILE 1
1 BBC ONE
2 BBC TWO
17 BBC1
1 BBC ONE
2 BBC TWO
!
7 BBC CHOICE
Select [Edit Profiles] and confirm with ENTER.
The Edit Profiles menu appears.
Press the GREEN button to select one of the 4 profiles.
11 BBC NEWS 24
17 BBC1
Connec
Others
10 BBC FOUR
45 BB Parlament
10 BBC FOUR
12 CBBC
!
!
Use to jump back and forth between the two tables.
To edit a new profile, use to go to the left side of the table and press the GREEN
13 CBEEBIES
!
Profile Select
Add
v
TO STORE, PRESS ENTER
JUMP
Page
Page
+
-
SELECT
button.
v
RETURN
Inserting individual channels into the profile.
!
Select a new profile.
!
Use to select the desired station and press the YELLOW button.
The station is inserted into the profile.
To insert additional stations, press the YELLOW button again.
!
!
!
Press ENTER to save the setting.
Inserting all available channels into the profile.
!
Select a new profile and press the BLUE button.
All channels are inserted into the profile.
Editing the profile
Use the GREEN button to select a profile. To edit the profile, press
.
Profile Name
!
Edit Profiles
PROFILE 1
All Services
1 BBC ONE
2 BBC TWO
Press the RED button to change the profile name.
The letter to be changed is highlighted in red.
1 BBC ONE
2 BBC TWO
17 BBC1
7 BBC CHOICE
!
Use to select the desired letters from the row of characters below and use to go
to the next letter to be changed.
11 BBC NEWS 24
10 BBC FOUR
17 BBC1
45 BB Parlament
10 BBC FOUR
12 CBBC
!
!
Use the GREEN button to add a space and use the YELLOW button to delete letters.
Confirm with ENTER.
13 CBEEBIES
ABCDEFGHIJKLMNOPQRSTUVWXYZ+-. â0123456789
Insert
Profile List
Delete
!
To change other profile names, repeat the procedure and save with ENTER.
SELECT
TO STORE, PRESS ENTER
CHANGE CHAR.
Move
Edit Profiles
!
PROFILE 1
1 BBC ONE
2 BBC TWO
17 BBC1
All Services
1 BBC ONE
2 BBC TWO
Use to select a station in the profile.
To move the station, press the GREEN button.
The station is highlighted in red.
!
7 BBC CHOICE
11 BBC NEWS 24
10 BBC FOUR
!
17 BBC1
Use to select the desired position and press the GREEN button again.
The station is inserted.
45 BB Parlament
10 BBC FOUR
12 CBBC
13 CBEEBIES
Delete
!
Move
Delete
Profile Name
Delete All
v
TO STORE, PRESS ENTER
JUMP
RETURN
Page
Page
+
-
SELECT
Use the YELLOW button to delete the station.
v
Delete All
!
Press the BLUE button to delete all stations from the profile.
!
Confirm all settings with ENTER.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
Auto-Setup Restart
Tuning
Auto-Setup Restart
ENTER
Warning--all stored tuning data
will be lost !
Do you want to proceed ?
Auto-Setup Restart
!
Yes
No
Use to select [Yes] and confirm with ENTER.
The station search begins.
SELECT
ENTER
RETURN
!
!
To cancel the process, use to select [No] and confirm with ENTER
or press RETURN.
To stop the station search early, press RETURN.
All station settings and all created profiles are deleted during a Restart.
Add New DVB Service
68
Tuning
Add New DVB Service
ENTER
Ch
2 New Services added.
DVB only
Add New DVB Service
The station search begins automatically.
!
To stop the station search early, press RETURN.
The channels found up to the abort of the station search are stored.
ENTER
RETURN
The unit searches for new digital stations. At the end of the station search, the
number of new digital programmes found is displayed.
Signal Quality
1 BBC ONE
Tuning
Signal Quality
ENTER
DVB CH30
0
5
10
v
CH +
RETURN
CH –
DVB only
Signal Quality
The Signal Quality display shows a bar to indicate the signal quality for digital channels.
v
0
10
means no signal
means best signal
If the signal quality is under 50% the colour of the signal bar is red.
If the signal quality is over 50% the colour of the signal bar is green.
!
Use CH
to launch and check the programmes in sequence.
The bar can be started only on digital services. The signal quality button is greyed out on
analogue services.
SETUP
Edit Profiles
ENTER
Tuning
Manual
Auto-Setup Restart
Digital
Add New DVB Services
Tuning
Disc
Entering a new analogue Television Station
!
Signal Quality
Analogue
Manual
Use
Enter the channel using
to select an empty station position and confirm ENTER.
9
Picture
Sound
Display
!
!
0
or
The channel tuning starts. Wait until the desired station is set and confirm the settings
-
.
Download from TV
Connection
Others
TAB
RETURN
SELECT
with ENTER.
ENTER
Options available for tuning the channels. Not every model supports all of the functions.
Manual Tuning
Pos Name
901 BBC1
902 BBC2
Ch
22
23
24
25
26
36
Pos Name
Ch
Pos
Station position.
911
912
913
914
915
916
917
918
919
920
Station name setting.
Name
ITV
CH4
CH5
903
904
905
906
907
908
909
910
Channel setting.
Channel
NICAM
Title Page
Automatic NICAM detection / Mono
The station title is obtained from the TV guide.
On / Off
* * * *
SELECT
ENTER
RETURN
Delete
Your digital channels can be found at positions 1 900.
Your analogue channels can be found at positions 901 999.
Manual search...
Please wait.
Pos
Name
Channel
992
-----
Manual
Tuning
21
NICAM
Title Page
CHANGE
RETURN
RETURN : leave
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
Manual Tuning
Tuning
Manual
ENTER
Pos Name
Ch
22
23
24
25
26
Pos Name
Ch
BBC1
BBC2
ITV
CH4
CH5
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
Changing the Name of the Television Station
!
* * * *
Use
Use
to select the name of the television station and confirm with ENTER.
Pos
901
BBC1
22
Manual
SELECT
ENTER
Tuning
Name
!
to select [Name] and use to select the name field.
B
Channel
RETURN
Off
NICAM
Title Page
The cursor jumps to the first letter BC1.
301
Delete
CHANGE
ENTER
!
!
!
Change the letter using
.
B
RETURN
Use to select the next letter B C1.
Press ENTER. The new name is saved in the station table.
RETURN
ENTER
:
:
leave
store
Deleting Television Stations
!
Use
to select the station that you want to delete.
!
Press the red Button to delete the station.
The settings of the programme position are deleted.
Download from TV
Tuning
Download from TV
ENTER
Warning--all currently
stored stations will be
replaced by new ones !!
Download from TV (with Q Link or similar functions)
!
Yes
No
Use to select [Yes] and confirm with ENTER.
The data transfer begins.
SELECT
ENTER
!
To cancel the process, use to select [No] and confirm with ENTER or press RETURN.
To stop the data transfer early, press RETURN.
RETURN
!
ENTER
ENTER
Disc
Settings
Option
SETUP
Settings for playback
Ratings
Level 5
Off
Ratings
Changing the Security Level
DVD-Audio Video mode Playback
Soundtrack
You can restrict the playback of DVD-Video by
entering a password.
Allows all titles.
1-7 Stops playback of DVD-Video
with registered security levels.
[Unlock Recorder] Return to level 8
[Change Password] Change the password
[Change Level]
[Temporary Unlock] You can temporarily unlock a disc
for playback. The unit is locked again when you switch to
standby or open the disc tray.
Tuning
Ratings
Disc
Subti
Menu
Unlock Recorder
8
Change the unlock level
Picture
Sound
Display
Change Password
Change Level
Temporary Unlock
0
Locks all titles.
Connection
Others
SELECT
ENTER
DVD-Audio Video mode Playback:
[On] [Off]
RETURN
On: You want to play the DVD-Video content of a DVD-Audio. If you change discs or turn the unit off, the
setting is reset to [Off].
Soundtrack Subtitle Menus
DVD-V
Select the language for Soundtrack, Subtitle and Menus. Under [Other], enter the
country code for a different language.
SETUP
Settings for playback
Settings for recording
Recording time in EP mode
[EP (6Hours)] [EP (8Hours)]
Tuning
Disc
Settings for recording
Recording time in EP mode
Select the maximum number of hours for recording in EP mode.
EP (6Hours): Recording time on a 4.7GB disc.
EP (8Hours): Recording time on a 4.7GB disc. The sound quality is lower.
EP ( 8Hours )
Picture
Esperanto
Estonia
6672 Faroese
6682 Fiji
6671 Finnish
7789 French
6979 Hindi
7273 Latin
7665 Oriya
7686 Pashto
7678 Persian
7684 Polish
7982 Sindhi
8368 Tigrinya
8473
8479
8482
8475
8487
8575
8582
8590
List of language codes
Abkhazian 6566 Bihari
6984 Hungarian
7079 Icelandic
7285 Latvian
7383 Lingala
7074 Indonesian 7378 Lithunian
8083 Singhalese 8373 Tonga
7065 Slovac
8076 Slovenian
8375 Turkish
8376 Turkmen
8379 Twi
Afar
6565 Breton
6570 Bulgarian
8381 Burmese
Afrikaans
Albanian
Ameharic
Arabic
7073 Interlingua 7365 Macedonian 7775 Portuguese 8084 Somali
7082 Irish
7089 Italian
7176 Japanese
7565 Javanese
6869 Kanada
6976 Kashmiri
7165 Malagasy
7384 Malay
7465 Malayalam 7776 Rhaeto-Rom. 8277 Swahili
7487 Maltese
7578 Maori
7583 Marathi
7575 Moldavian
7589 Mongolian
7579 Nauru
7771 Punjabi
7783 Quechua
8065 Spanish
8185 Sundanese 8385 Urdu
6983 Ukrainian
6577 Byelorussian 6669 Frisian
6582 Cambodian 7577 Galician
8387 Uzbek
8386 Vietnamese 8673
Armenian
7289 Catalan
6765 Georgian
9072 German
6779 Greek
7784 Romanian
7773 Russian
7782 Samoan
7779 Sanskrit
8279 Swedish
8285 Tagalog
8377 Tajik
Assamese 6583 Chinese
Aymara
8476 Volapük
8471 Welsh
8465 Wolof
8484 Xhosa
8469 Yiddish
8472 Yoruba
6679 Zulu
8679
6789
8779
8872
7473
8979
9085
6589 Corsican
Azerbaijani 6590 Croatian
7282 Greenlandic 7576 Kazakh
8365 Tamil
Bashkir
Basque
Bengali
Bhutani
6665 Czech
6985 Danish
6678 Dutch
6890 English
6783 Guarani
6865 Gujarati
7876 Hausa
6978 Hebrew
7178 Kirghiz
7185 Korean
7265 Kurdish
7387 Laotian
7778 Scots Gaelic 7168 Tatar
7865 Serbian
7869 Serbo-Croat. 8372 Thai
8378 Tibetan
8382 Telugo
7585 Nepali
7679 Norwegian 7879 Shona
44
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
SETUP
Picture
Settings
Option
ENTER
ENTER
On
Automatic
On
Comb Filter
Still Mode
Comb Filter
[On] [Off]
Seamless Play
Tuning
Disc
On: The picture becomes clear and contour-rich. This setting is always set to [On] if you
have selected [TV System - NTSC].
Off: If the picture to be recorded is grainy.
Picture
Sound
Display
SELECT
RETURN
Connection
Others
TAB
Still Mode
[Automatic] [Field] [Frame]
Select the display of the still image.
Field: Select this function, if the picture is disturbed with the [Automatic] setting.
Frame: Select this function if small text or line structures are not displayed clearly with the [Automatic]
setting.
Frames are still images that together form a moving picture. A full frame is made up of
2 half frames. The picture can appear blurry but the overall quality is good.
A half frame only contains half of the information of a full frame and has a poorer picture quality.
Seamless Play
[On] [Off]
On: When playing playlists, the transitions from one chapter to the next are improved.
The end and beginning of the chapters can shift slightly and the transition is smooth.
Off: The transitions between the chapters are played as they were recorded. The picture may freeze for a second
during the transition.
Seamless Play does not work if several audio channels are recorded..
SETUP
Off
M1
ENTER
ENTER
Dynamic Range Compression
Bilingual Audio Selection
Digital Audio Output
Sound
Settings
Option
DVD-V
(only Dolby Digital)
Dynamic Range Compression
[On] [Off]
Tuning
Disc
On: The level of quiet sections is increased and the level of loud sections is decreased. The sound is still
clearly audible when the volume is decreased.
Picture
Sound
Display
SELECT
TAB
Connection
Others
-R -RW(V) +R
[M 1] [M 2]
Bilingual Audio Selection
RETURN
If you want to record programmes on discs that were broadcast in dual channel tone, you can choose between the
original language [M 1] or another available language [M 2].
If you are copying from an external source or a tape position to disc, select the sound track on the other unit.
SETUP
Digital Audio Output
Off
PCM Down Conversion
Dolby Digital
Bitstream
[PCM Down Conversion], [Dolby Digital], [DTS], [MPEG]
Digital Audio Output
Tuning
Disc
DTS
Bitstream
PCM
Select the appropriate setting if an external unit is connected
to the DIGITAL AUDIO OUT of the DVD Recorder.
MPEG
Picture
Dolby Digital
Sound
Bitstream
PCM
Display
Connection
Others
PCM Down Conversion
[On] [Off]
Select the audio output mode at a scanning frequency of 96 kHz or 88.2 kHz.
Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a scanning frequency of more than
96 kHz or 88.2 kHz or a disc is copy-protected.
SELECT
ENTER
On: The connected unit cannot process signals with a scan frequency of 96 kHz or 88.2 kHz. Signals are
converted to 48 kHz or 44.1 kHz.
RETURN
Off: The connected unit can process signals with a scan frequeny of 96 kHz or 88.2 kHz. Signals are output as 96
kHz or 88.2 kHz.
[Bitstream] [PCM]
Dolby Digital, DTS, MPEG
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be switched to [PCM].
Otherwise, strong noise can cause damage to hearing or loudspeakers.
Perform settings based on your audio system.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
SETUP
ENTER
ENTER
Display
Settings
Option
English
Automatic
On
DVB Preferred Subtitles
On-Screen Messages
Grey Background
DVB only
DVB Preferred Subtitles
Tuning
Disc
FL Display
Bright
Select the language for DVB Subtitles.
Automatic
New Service Message
Picture
Sound
Display
On-Screen Messages
[Automatic] [Off]
SELECT
RETURN
Connection
Others
TAB
Automatic: The screen messages are displayed on the screen.
Grey Background
[On] [Off]
On: The grey background is displayed when there is no television reception.
New Service
A new DVB service has been found.
Add to the list of "All Services"?
FL Display
[Bright] [Dim]
Yes
No
Change the brightness of the unit display.
DVB only
New Service Message
[Automatic] [Off]
Automatic: New digital stations are constantly scanned in the background. A message is displayed if new stations
were found and you can add them to you station list.
SETUP
ENTER
ENTER
Connection
TV Aspect
Settings
Option
TV Aspect
Progressive
TV System
16:9
Off
[16:9] [4:3] [Letterbox]
PAL
Tuning
Disc
Select the TV picture format of your television set.
Letterbox: Black bar appear at the top and bottom of your screen.
AV1 Output
RGB
AV2 Settings
Picture
Sound
Display
Progressive
[On] [Off]
Only COMPONENT VIDEO OUT.
SELECT
RETURN
Connection
Others
TAB
On: In COMPONENT VIDEO OUT mode, the signal is displayed in full picture quality.
[PAL] [NTSC]
TV System
PAL: You connect the unit to a PAL or multi-system television set.
Programmes that were recorded with NTSC are played back as PAL60.
NTSC: You connect the unit to an NTSC television set.
Programmes that were recorded with NTSC are played back as NTSC.
SETUP
TV Aspect
Progressive
TV System
16:9
Off
[Video ( with component )] [S Video (with component)]
[RGB ( without component )]
AV1 Output
PAL
Tuning
Disc
Switch to RGB for an improved picture quality.
If RGB is set, no signal is available at COMPONENT VIDEO OUT.
AV1 Output
RGB
AV2 Settings
Picture
Sound
Display
AV2 Settings
AV2 Input, Ext Link
SELECT
RETURN
Connection
Others
TAB
Perform the settings in the following sub menus for the connected device.
[RGB / Video] [RGB] [Video] [S Video]
AV2 Input
SETUP
AV2 Settings
AV2 Input
Ext Link
RGB/Video
Ext Link 1
RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.
Tuning
Disc
AV2 Input
RGB / Video
RGB
Ext Link
[Ext Link 1] [Ext Link 2]
Picture
Sound
Display
Video
Ext Link 1: For digital receivers that send a special recording control signal, e.g. the F.U.N. receiver (TU-DSF41).
Ext Link 2: External recording control for satellites or digital receivers (video signal).
S Video
Connection
Others
SELECT
ENTER
RETURN
46
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
N
S
SETUP
Remote Control
Clock
DVD 1
On
Others
Setting
Option
ENTER
ENTER
7
Remote Control
[DVD 1] [DVD 2] [DVD 3]
Owner ID
Tuning
Quick Start
Change the code of the remote control so that you can also use another Panasonic DVD unit at the
same time.
Disc
System Update
Shipping Condition
Default Settings
Picture
Sound
Display
Clock
47
47
Set the date and time.
Connection
Others
SELECT
RETURN
TAB
Owner ID
Secure the unit with your own PIN number and your own personal information.
Quick Start
[On] [Off]
On: The device is ready for use from standby mode after approx. 2 seconds. Standby mode uses more power.
Off: If you select Quick Start [Off], the programme information for TV Guide need to be reloaded after Power ON.
18
48
[EPG Download in Standby], [Software Update in
Standby], [Software Update Search Now]
DVB only
System Update
Load new software to your unit or update the programme guide during the night.
Shipping Condition
All settings except for the security levels with associated password and the time settings are reset to their factory settings.
Default Settings
All settings except for the programmed channels, time, country, language and disc-language settings, the security
levels including password and the remote-control code are reset to the factory settings.
Clock
Others
Clock
ENTER
Option
ENTER
Automatic Off
Clock setting
Time
Date
:
:
.
.
2005
0
00 00
1
1
The clock will normally be set correctly during Auto-Setup however, in some circumstances
the DVD Recorder cannot set the clock automatically. In this case follow the operation steps
below to manually set the clock.
Please set the clock.
ENTER: access RETURN: leave
CHANGE
ENTER
!
Use to switch automatic mode to [Off] and confirm with ENTER.
Use and to change Time and Date.
Confirm the change with ENTER.
RETURN
!
If Clock setting is set to AUTO, do not
set it to MANUAL, otherwise the
automatic time correction function is
deactivated.
!
To activate the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD Recorder is
tuned to a station that transmits a time signal.
This DVD Recorder uses a 24 hour
clock. In case of a power failure an
automatic back-up system maintains
the clock for approximate 60 minutes.
!
Use to switch automatic mode to [On] and confirm with ENTER.
The automatic setting of the clock begins.
When Clock setting is set to AUTO,
the automatic time correction function
checks and if necessary adjusts the
time several times every day.
!
Under adverse reception conditions, etc., the Automatic time correction function may not
work. In this case the indication for Clock setting is automatically reset to MANUAL.
If the reception conditions improve later on, it is possible to activate this function.
The automatic time correction function
only works when the DVD Recorder is
in standby, it does not work in the
timer recording mode.Don't forget to
change summer time and winter time.
ENTER
ENTER
Others
Onwer ID
Option
Owner ID
!
Use and press the Numeric buttons or
Press to correct the digit.
Press the ENTER button twice to confirm.
to enter a four-digit PIN number.
Owner ID
!
!
!
!
!
PIN number
****
Enter the [Name], [House No] and [Postcode] in the same way, using
Press the ENTER button to confirm each entry.
Press the RETURN button to leave the Owner ID screen.
.
Name
**************
House No.
Postcode
***********
***********
RETURN
RETURN : leave
To display the Owner ID information on TV
!
On the unit press STOP for more than 5 seconds.
The PIN number is not displayed.
After 30 seconds this menu automatically disappears.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
SETUP
Others
N
S
System Update
ENTER
Option
ENTER
[On] [Off]
EPG Download in Standby
The unit is permanently looking for EPG data to fill up programme information in the TV Guide as long as it
is tuned to a DVB channel, even in standby mode.
On: An additional "EPG download" during the night is enabled to speed up the loading of data. It will run
during one hour between 03:05 am and 05:05 am. During this time "GUIDE" will be shown on the display of
the unit.
SETUP
System Update
On
On
EPG Download in Standby
Software Update in Standby
Software Update Search Now
Tuning
Off: No EPG download during the night will be done. The TV Guide screen will not appear if you press the
GUIDE button in standby. If the unit is tuned to an analogue channel, no EPG data will be loaded.
Disc
DVB Version: 0.31
Picture
Sound
Display
EPG download is only possible if Quick Start is set to [On]. If you press TIMER out of standby for a TIMER
recording during EPG download, the TIMER recording will start after the download is finished and not directly.
SELECT
Connection
Others
ENTER
RETURN
[On] [Off]
Software Update in Standby
In standby mode the unit searches for new software at night between 3:05 am and 5:05 am.
On: If a new software is found, the download starts automatically. The download procedure lasts appr. 10-15
minutes. During this time "SW-DL" will be shown on the display of the unit. It is recommended not to operate the
unit during this time.
Off: If the setting is set to [Off], no automatic software download is executed.
If TIMER recordings are programmed for the time between 3:05 am and 5:05 am the automatic software download
might not be done. The software download will not be executed if the unit is in EXT Link mode between 3:05 am
and 5:05 am.
System Update
Software Update Search Now
A new software version has been found.
Update your software?
A scan over all digital transponders will be performed to find new software (this search could take up to
10 minutes).
If the system finds an update, a message appears on the screen.
Yes
No
!
Press [Yes] to load the new software to your unit. The download takes approximately 15 minutes.
Do not switch your unit off while the update is running. This may result in data loss.
A message appears on the screen when the update is complete.
!
!
48
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
DISC MANAGEMENT
N
S
!
Press FUNCTIONS in stop mode.
DISC
MANAGEMENT
DVD-RAM
Title No.
Used
1
0:01
Remain
0:59(XP)
!
!
!
!
Use
Use
Use
to select [To Others] and confirm with ENTER.
to select DISC MANAGEMENT and confirm with ENTER.
to select the desired menu and confirm with ENTER.
Disc Name
Disc Protection
Erase all titles
Off
Use FUNCTIONS to return to the FUNCTIONS menu.
Format Disc
SELECT
ENTER
RETURN
-R -RW(V) +R
RAM
Disc Name
!
Enter the name. The name is displayed in the FUNCTIONS window.
You cannot give a name to a disc after it has been finalised.
Disc Protection
Set up Disc Protection ?
Yes
No
RAM
Disc Protection
This procedure allows you to activate or deactivate write protection.
!
Use to select [Yes] and confirm with ENTER.
Write Protection On: The padlock is closed.
!
To deactivate write protection, use to select [Yes] and confirm with ENTER.
Write Protection Off: The padlock is open.
Erase all titles
RAM
Erase all titles
!
Confirm [Erase all titles] with ENTER.
In the following screen, use to select [Yes] and confirm with ENTER.
All titles and PLAYLISTS will be erased.
Is it OK to start erasing all titles ?
!
In the confirmation message, use to select [Start] and confirm with ENTER.
All titles and PLAYLISTS will be erased and cannot be restored.
Protected discs or titles cannot be erased.
Yes
No
RAM
DISC
If write protection is activated, deactivate it.
MANAGEMENT
Title No.
Used
1
0:01
Remain
0:59(XP)
DVD-RAM
!
Press FUNCTIONS in stop mode.
Disc Name
!
!
!
!
Use
Use
Use
to select [To Others] and confirm with ENTER.
to select DISC MANAGEMENT and confirm with ENTER.
to select the desired menu and confirm with ENTER.
Disc Protection
Erase all titles
Off
Format Disc
SELECT
Use FUNCTIONS to return to the FUNCTIONS menu.
ENTER
RETURN
-RW(V) -RW(VR)
RAM
Format Disc
Format Disc
Formatting will erase all contents.
This will take approximately 1 minute.
Start formatting ?
Some Discs are not formatted. Before you can use them in this unit, they must be
formatted. The formatting erases all data on the disc.
!
Use to select [Yes] and confirm with ENTER.
Use to select [Start] and confirm with ENTER.
Yes
No
!
The formatting process begins. After it is complete, a message is displayed.
Press ENTER.
Press RETURN to stop the formatting process.
!
Format Disc
!
All contents will be erased even if protected.
Start formatting ?
If the formatting process takes more than 2 minutes, an error may have occurred.
The formatting can be cancelled and restarted.
Do not unplug the unit while the disc is being formatted.
Start
Cancel
During formatting, all data is erased, including recordings created with this unit.
DVD-R/+R and CD-R/RW cannot be formatted.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS Selection Menu
F
U
N
C
To Others
DISC MANAGEMENT
N
S
!
Press FUNCTIONS.
DISC
MANAGEMENT
Title No.
Used
1
Remain
0:59(XP)
!
!
!
!
DVD-R
Use
Use
Use
to select [To Others] and confirm with ENTER.
to select DISC MANAGEMENT and confirm with ENTER.
to select the desired menu and confirm with ENTER.
0:01
Disc Name
Auto-Play Select
Finalize
Top Menu
Use FUNCTIONS to return to the FUNCTIONS menu.
Auto-Play Select
SELECT
ENTER
-R -RW(V) +R
Auto-Play Select
Before finalisation you must select the start menu to be shown at the beginning of the
RETURN
Top Menu
Title 1
DVD-V.
!
Use
to select [Top Menu] or [Title 1] and confirm with ENTER.
If [Top Menu] is selected, the disc menu appears first.
If [Title 1] is selected, the playback begins at the beginning of the disc.
Finalize
Finalizing is necessary for compatible
playback. It will take approximately 15 minutes.
Finalize the disc ?
-R -RW(V) +R
Finalize
Finalizing turns DVD-Rs into DVD-Videos in DVD-Video format .
They can be replayed on all DVD players which play the DVD-Video format.
!
Yes
No
Use to select [Yes] and confirm with ENTER.
Use to select [Start] and confirm with ENTER.
!
The finalisation process begins and takes approx. 15 minutes.
When this process is finished, a confirmation message appears.
Press ENTER.
Finalize
!
Finalize will make this disc playback only.
Start finalizing the disc ?
Do not unplug the unit while the disc is being finalized.
You can only finalize Discs that were recorded on this unit.
You can no longer record to already finalized Discs.
A finalised DVD-RW can be recorded again after reformatting.
Start
Cancel
After Finalization
Before Finalization
DVD-R / -RW / +R
Possible
Disc display on this device
Record/edit/enter names
Play on other playback units
DVD-V
Possible
50
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY menus
DISPLAY menus contain information on the disc or the unit. With DVD-Video you can use the repeat function, change subtitles
and perspectives, with DVD playback, you can change the picture and sound setting.
Depending on the status of the unit (playback, stop), there are some entries that cannot be selected or changed. Subtitles,
soundtrack and recording angle can only be selected if they were recorded on the disc. With some discs, these can only be
changed via the disc menus. When playing recordings of bilingual programmes, "1+1 ch" is displayed.
!
Press DISPLAY to launch the menu
Press DISPLAY again to exit the menu.
!
DISPLAY
Disc
Option
Setting
Disc
Play
Picture
Sound
Other
Soundtrack
Subtitle
Angle
1 ENG
Digital
Off
2/Och
Soundtrack lang.
DVD-A DVD-V
1
Eng
1
Change the language by changing the soundtrack.
Soundtrack
LPCM/PPCm/Dolby Digital, DTS and MPEG signal type
k (kHz): scan frequency, b (bit): number of bits
ch (channel): number of channels
Sound properties
RAM
DVD-R DVD-A DVD-V
Soundtrack/
Subtitle Language
ENG : English
FRA : French
DEU : German
ITA : Italian
ESP : Spanish
NLD : Dutch
Subtitle language
DVD-A DVD-V
Change the subtitle language.
Switch subtitles on or off.
Subtitle
Subtitles [On] [Off]
RAM
DVD-R DVD-A DVD-V
SVE : Swedish
NOR : Norwegian
DAN : Danish
POR : Portuguese
RUS : Russian
JPN : Japanese
CHI : Chinese
KOR : Korean
MAL : Malay
DVD-A DVD-V
Angle
Select another recording angle.
Still picture number
DVD-A
Return to standard page: Select [Return] and press ENTER.
STILL-P.
Slide Show
Display only
-RW(VR)
RAM
VCD
Audio channel
PBC
Select the audio channel L+R / L / R
VIE : Vietnamese
THA : Thai
PBC displays whether the menu playback control is switched on or off.
*
: Other
DISPLAY
Play
Option
Setting
Disc
Play
Repeat Play
Off
[On] [Off] This function is only available when the elapsed playtime is displayed.
Repeat Play
-R -RW(V) +R
-RW(VR) DVD-V
Picture
Sound
Other
RAM
During the playback of playback list
RAM
Title
Chapter
Off
Off
PL (PLAYLISTS)
Off
VCD CD
Track
Track
All
If the video CD has playback control
!
Select a track using the numeric buttons
in stop mode.
DVD-A MP3
Group
Off
DISPLAY
Picture
Option
Setting
Disc
Play
Picture
Sound
Other
Playback NR
Off
Reduces noise and image distortion.
Playback NR
Progressive
Transfer
[On] [Off]
Progressive On Transfer Auto
[On] [Off] Switch the COMPONENT VIDEO OUT connection to progressive output.
For [Progressive - On], select the appropriate conversion method for full picture output.
PAL output signal
NTSC output signal
[Auto] [Video] Select Video if the Auto setting disrupts the video content.
[Auto1] [Auto2] [Video] Select Video if Auto1 or Auto2 settings disrupt the video content.
DISPLAY
Sound
Option
Setting
Disc
Play
Picture
Sound
Other
DVB Multi Audio
DVB only
If more than one audio channel is broadcast, you can set the desired channel here (only
applies to digital channels).
DVB Multi Audio
V.S.S.
Dialog Enhancer
1 ENG
Off
Off
RAM -R -RW(V) +R
DVD-V DVD-A
-RW(VR)
[Natural] [Emphasis] [Off]
with 2 front loudspeakers. Only with Dolby Digital with 2 or more channels. Switch V.S.S. off
if this leads to disturbances. V.S.S. does not work when recording two-channel sound.
V.S.S.
Surround sound effect
RAM -RW(V) +R
-RW(VR) DVD-V DVD-A
Dialog Enhancer
[On] [Off]
Dolby Digital, only with 3 or more channels, including a center channel. The volume is
increased so that dialogs are easier to understand.
DISPLAY
Other
Option
Setting
Sound
Other
[1 - 5]
Position
Position of the OSD displays on the screen
Position
1
51
Download from Www.Somanuals.com. All Manuals Search And Download.
STATUS displays (Banner)
DVB only
Banners contain compact programme information on the current and next programme.
PAGE
Displaying the Banner
!
CH
Change stations (CH
Press ENTER or
or numeric buttons).
!
.
Hiding the Banner
!
Press RETURN or wait 5 seconds.
!
!
Press CH
. The next or the previous channel are displayed. The banner
1 BBC ONE WALES
Bad Signal
10:46
PROFILE 1
information is updated and the tuner changes to the new channel. If you press
RETURN to hide the banner information, the new channel is displayed.
Coronation Street
20:00 ~ 20:55
Change Category
info
Now
Encrypted
Multi-Audio
TXT
Subtitle
Press . The next or the previous channel are displayed. The banner
information is updated. But the tuner does not change the channel. If you press
RETURN to hide the banner information, the old channel is displayed.
Banner information
Programme position and name of the current station.
1 Name
Change Profile
info
Press the blue key to change the Category.
Signal Condition
[No signal; bad Signal; No Service]
Shows the signal quality of the current station.
No indication means good signal.
Press to display detailed information on the current
programme.
Appears if you selected a station with an encrypted
signal. You cannot view it because the unit is for
viewing and recording free to view channels only.
Encrypted
Category
Shows which Category is currently selected. [Free TV,
Radio, Information, Profile 1, Profile 2, Profile 3, Profile 4,
All Services]
Appears if the current programme is broadcast in multi-
channel sound.
Multi-Audio
10:46
The current time.
Title
Title and airtime of the current programme.
TXT
Appears if the MHEG service is available.
Now / Next
Now: Switch to information on the current programme.
Next: Switch to information on the next programme.
Appears if subtitles are available for the current
programme.
Subtitle
!
If the Banner indicates that there is additional information available on the
programme, press to display it.
To exit the additional information, press again.
11 BBC NEWS 24
10:46
All Services
Business Today
20:30 ~ 21:00
Business News from the world
!
Now
Exit info
A Banner is also displayed for digital radio service and additional information
can be displayed, if available.
TXT
Subtitle
Recording
DVB Banners cannot be recorded. Thus, you cannot display DVB Banners during
a recording. One exception is a special recording Banner that appears during the
recording of radio programmes. You cannot navigate in this Banner and it cannot
be hidden. A similar Banner is displayed for "No Signal", "Bad Signal", "Encrypted
programme", "No Service available" and "Channel unavailable".
14 Radio 21
Radio
No Banners with information are displayed for analogue channels.
When changing channels or if you press the button, a Banner appears with
the option of changing the current profile.
Profile 1
Change Category
!
Press the blue button to change the profile.
The Banner disappears after 5 seconds.
MHEG Service
DVB only
MHEG service is a digital teletext service provided by various broadcast
organisations (not for analogue channels). Stations that offer the MHEG service can
be identified by the [TXT] in the Banner.
!
Press TEXT to launch the MHEG service. It may take some time for the
information to load and display. Please be patient.
!
Use to page up and down or use the numeric buttons to select a specific page
number. The features depend on the respective station.
CREATE
CHAPTER
!
ERASE
MANUAL SKIP
The coloured buttons allow you to quickly access certain topic areas and the
navigation to the MHEG pages. The features depend on the respective station.
Press TEXT to exit the MHEG service.
!
Digital Teletext cannot be recorded. When subtitle is on or additional information in
the banner is displayed, Digital Teletext does not work.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
STATUS displays
STATUS
Displaying the information
!
Press STATUS.
Press STATUS again. The display changes each time that the button is pressed.
To exit the display, press STATUS.
!
!
1: Current medium
2: Current recording and playback state
Record
REC
PAUSE
PLAY
Pause playback
Pause recording
Playback
Fast forward (5 speeds)
Rewind (5 speeds)
Slow motion
Slow-motion rewind (5 speeds)
Quick View
(Playback x1.3)
PLAYx1.3
4
DVD-RAM
PLAY
1
2
Remain
T14
0:50 SP
0:05.14 SP
10:07:21 1/12
5
6
T14 0:05.14 SP
10 DVB
BBC1
3
7
3: Current programme position and station name are displayed.
DVB indicates that the station is digital.
4: Available recording time and recording mode: e.g. 0:50 SP shows 50 minutes in
SP mode.
5: Current date and time
6: Title number: Also shows the recording mode and the current playback time of the title.
7: Title number: Also shows the recording mode and the current recording time of the title.
The status information changes depending on the function, e.g. PLAY, REC or REC PLAY.
Informations
This DVD Recorder is a precision unit. Handle it carefully and do not expose it to vibrations
during recording. Otherwise there may be breaks or noises in the recordings.
The manufacturer accepts no responsibility and offers no compensation for loss of recorded
or edited material nor for consequential damages attributed to a defect in the
unit or the disc.
This product incorporates copyright protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
DTS (Digital Theater Systems)
Sound system used in cinemas or movie theaters all over the world.
DTS and DTS 2.0 + Digital Surround are trademarks of Digital Theater Systems, Inc.
MHEG-5
(Multimedia and Hypermedia Expert Group) is an ISO Standard for interactive applications
e.c. for digital TV. Typical examples of MHEG applications: electronic program guide,
homeshopping and enhanced teletext service.
Dolby Digital
Method of encoding digital signals. The signals are very much compressed in the process
to enable recordings of large volumes of data. Manufactured under license from Dolby
Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories.
MP3 or MPEG 1 Audio Layer 3 is a file compression format used for digital audio files.
It provides files of an extremely small size and may cause a consequential loss of quality.
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson
multimedia.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Before requesting service
FUNCTION
No function possible.
î Check the power supply connection.
î There is a malfunction. The numbers following the letter «H» indicate the
condition of the unit.
The unit is switched on but cannot
be used.
!
Switch the unit to standby /I. If the unit does not switch to standby
mode, press and hold /I for approx. 10 seconds or unplug it from the
power supply for approx. one minute and reconnect the cable.
Press /I to switch the unit on.
The error code «H
or «F » appears:
», «U
»
!
If the malfunction is not eliminated after this, contact customer service
and provide the code that is displayed.
The unit automatically switches to
standby mode.
î One of the unit's security devices may have been activated.
Press /I to switch the unit on.
No picture.
î Check the connection to the television set, e.g. AV1.
î When Encrypted is shown, you cannot view because the unit is
for viewing and recording free to view channels only.
PICTURE
10
Television reception worsens when
the unit is connected.
î Check the aerial connection. You may need to use a signal amplifier.
The picture is not set correctly.
The picture flickers.
No on-screen messages.
No sound/
î Check the [TV Aspect] setting in the Connection SETUP menu.
î Adjust the picture. Read the operating instructions for the television.
î Change the [On-Screen Messages] setting in the Display SETUP menu.
46
46
SOUND
î Check the connections.
î If you have connected an amplifier, check its input mode.
î Switch off the V.S.S. function if it causes problems.
Volume set to quiet/
Distorted sound.
53
88
î Press DISPLAY and select [audio channel], to change to the desired
sound type.
î Change the appropriate setting in the Sound SETUP menu.
It is not possible to hear the desired
sound type.
î Connect external devices with audio cables even if you use a digital
connection.
î You cannot change the sound type when using DVD-R/-RW(V)/+R.
17
The sound cannot be set for stereo or
NICAM broadcasts.
The display lighting
is weak.
SDTISRPOLMAY
46
î Change the [FL Display] in the Display SETUP menu.
î No time. Set the time in the Others, [Clock] SETUP menu.
47
"0:00" blinks on the unit display.
î If the unit is in TIMER standby mode ( on the unit) end this with TIMER.
î A wrong remote control code was selected.
î Check the batteries.
REMOTE CONTROL No functions.
Point the remote control at sensor on the unit.
î The child lock feature has been activated.
î If the unit is in External Link Standby Mode (External Link is displayed on
the unit) end this by pressing EXT LINK on the remote control.
7
The television cannot be operated.
î A wrong remote control code was selected.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Before requesting service
î The disc is dirty or badly scratched.
î You inserted a disc that is not suitable for playback.
î You inserted a blank disc.
PLAYBACK
Playback does not
start.
î You may have recorded MHEG Data or encrypted programms.
Black screen is played.
DVD-Video will not play.
44
44
î Some DVD-Videos cannot be played if the security level has been changed.
î appears on the screen. The procedure is stopped by the unit or the disc.
î The child lock feature has been activated.
7
No reaction when the button is pressed.
A title or chapter is not played back
after being selected.
î Some titles and chapter of DVD-Video are not played back if the
Ratings have changed.
Alternative soundtracks and subtitles
cannot be selected.
î The languages were not recorded on the disc.
î You may need to use the disc menu to select the languages.
The soundtrack/subtitle language does
not match the language selected in the
SETUP menu.
î The language is not recorded on the disc.
î The subtitles are not recorded on the disc or are not switched on.
No subtitles.
53
î The angle perspective can only be changed for scenes that were
recorded in different angles.
The perspective cannot be changed.
î With the unit disc tray open, press and hold REC and PLAY/ x1.3
simultaneously for at least 5 seconds.
You forgot your classification password.
Video or audio from
EXTERNAL INPUT
EXTERNAL INPUT
î The external device is not connected correctly.
î The correct external input channel AV2 or AV3 was not selected.
17
external device is
not recorded.
Is it possible to programme
a recording, with a start and
end time that are different
from the TV Guide system?
TV Guide
î You can manually change the start and end time of TIMER
programmes in the TIMER RECORDING menu.
29
29
î The "T" symbol appears in the TV Guide when a TIMER recording is
programmed with the TV Guide system. To cancel a TIMER
RECORDING programming, press PROG/CHECK.
How can I cancel a TIMER
programming?
Select the desired entry and press CANCEL.
Cannot record.
RECORDING
î Check whether the inserted disc is suitable for recording.
î The disc is not formatted. Format the disc (RAM/DVD-RW).
î The write-protection device on the Cartridge is set to "PROTECT".
Deactivate the write protection.
49
49
20
î If you activated the write protection, deactivate it in the DISC
MANAGEMENT menu.
î The material that you want to record is copy-protected.
î If the power goes out during recording or editing or the power plug is
disconnected from the power socket, the programme can be lost or the
disc can be damaged.
Part or all recorded programmes
were lost.
î The TIMER programming is incorrect or different TIMER-programmes
are overlapping each other. Correct the programming.
î The unit is in standby mode for TIMER-controlled recording.
Press TIMER.
29
TIMER-controlled recording is not
working.
î Check the clock setting.
î Press TIMER during the TIMER-controlled recording.
î In the case of a TIMER-controlled recording via an external device,
press EXT LINK. EXT L disappears.
The TIMER-controlled recording
cannot be cancelled.
32
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Recording System
DVD Video Recording format (DVD-RAM),
DVD-Video format (DVD-R),
DVD-Video format (DVD-RW)
Video Out (PAL/NTSC): AV1/AV2 (21 pin), Video Out (pin jack) 1 Vp-p 75 Ù, termination
S-Video Out (PAL/NTSC): AV1 (21 pin), S-Video Out (S terminal) 1 Vp-p 75 Ù, termination
RGB Out (PAL/NTSC): AV1 (21 pin) 0.7 Vp-p (PAL) 75 Ù, termination
Component video output (NTSC 480p/480i, PAL 576p/576i)
Y: 1.0 Vp-p 75 Ù, termination
Recordable discs
DVD-RAM :
Ver. 2.0
Ver. 2.1/3×–SPEED DVD-RAM Revision 1.0
Ver. 2.2/5×–SPEED DVD-RAM Revision 2.0
PB: 0.7 Vp-p 75 Ù, termination
PR: 0.7 Vp-p 75 Ù, termination
DVD-R :
for General Ver. 2.0
for General Ver. 2.0/4×–SPEED DVD-R Revision 1.0
for General Ver. 2.x/8×–SPEED DVD-R Revision 3.0
DVD-RW :
Ver. 1.1
Ver. 1.1/2×–SPEED DVD-RW Revision 1.0
Ver. 1.2/4×–SPEED DVD-RW Revision 2.0
Audio
Recording System:
Audio In:
Input Level:
Input Impedance:
Audio Out:
Output Level:
Output Impedance:
Digital Audio Out:
Dolby Digital 2ch
AV1/AV2 (21 pin), AV3/AV4 (pin jack)
Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz
More than 10 kÙ
AV1/AV2 (21 pin), Audio Out (pin jack)
Standard: 0.5 Vrms, Full scale: 2.0 Vrms at 1 kHz
Less than 1 kÙ
+R :
Optical terminal (PCM, Dolby Digital, DTS, MPEG)
Ver. 1.0
Ver. 1.1
Ver. 1.2
Recording Time
Maximum 8 hours (with 4.7 GB disc)
XP: Approx. 1 hour SP: Approx. 2 hours
LP: Approx. 4 hours EP: Approx. 6 hours/8 hours
Playable discs
DVD-RAM, DVD-R, DVD-RW, +R,
+RW, DVD-Video, DVD-Audio, CD-Audio (CD-DA), Video CD,
CD-R/RW (MP3, CD-DA, Video CD, JPEG formatted discs),
SVCD (conforming to IEC62107)
Video
Television System
Tuner System:
Channel Coverage:
RF Converter Output:
DVB-T, PAL-I
UHF: CH 21–68
UHF: CH 21–68 71±3 dBµV 75 Ù, termination
LASER Specification
Class 1 LASER Product
Wave Length:
Laser Performance: Class 3B/Class 3A (optical scan unit)
No hazardous radiation is emitted with the safety protection
795 nm (CDs), 662 nm (DVDs)
Others
Region Code
Operating Temperature: 5–40 °C
Video System:
PAL colour signal, 625 lines, 50 fields
NTSC colour signal, 525 lines, 60 fields
MPEG2 (Hybrid VBR)
# 2
Recording system:
Operating Humidity range:10–80 % RH (no condensation)
AC 220–240 V, 50 Hz
28 W
Video In (PAL/NTSC): AV1/AV2 (21 pin), AV3/AV4 (pin jack) 1 Vp-p 75 Ù,
termination
S-Video In (PAL/NTSC):AV2 (21 pin), AV3/AV4 (S terminal) 1 Vp-p 75 Ù, termination
Power supply:
Power consumption:
Dimensions (W×D×H): Approx. 430 mm × 350,5 mm × 63 mm
Mass: Approx. 3.5 kg
RGB In (PAL):
AV2 (21 pin) 0.7 Vp-p (PAL) 75 Ù, termination
Note: The values given for weight and dimension are approximate values. The technical data can be changed without advanced notice.
Index
Page
Page
Page
Satellite receiver
Seamless play
Shipping Condition
Signal Quality
Slide Show
Sound properties
Soundtrack
Still Mode
13,46
45
47
Grey Background
Interlace
46
Add New DVB Service
Audio channel
Angle
AV1 Output
AV2 Input
AV2 Settings
43
28,53
53
8,16
44
43
46
46
46
26,53
53
53
45
44,53
47,48
Language codes
MHEG
MP3
MPEG
Multi-Audio
NTSC
5,51,52
25,51
45,51
5,53
21,34,
55,46
Banner
Bilingual Audio Selection
Bitstream
52
28,45
45
Subtitles
System Update
Time
11,14,
47
24
43
22,50
46
CD (MP3/JPEG)
Child lock
Comb Filter
25,26
7
45
TIME SLIP
Title Page
TOP MENU
TV Aspect
TV Guide
On-Screen Messages
Owner ID
OPTICAL
46
11,14,47
8,17
CPRM / Cartridge-disc
20
Date
11,14,47
47
53
18,19
46
PAL
PCM Down Conversion
PDC
Playback NR
Position
Profiles
21,46
Default Settings
Dialog Enhancer
Digital Audio Output
Disc formats
Disc Protection
Dolby Digital
DTS
TV System
45
28
53
53
17,45
20,21
49
V.S.S.
53
26
5,19,42
8,16,46,53
Zoom
Progressive
17,45,51
17,45,51
Q Link
Quick Start
11
47
DVD-Audio Video mode
Playback
Dynamic Range Compression
44
45
Ratings
Recording mode
Recording time
44
28
28
Ext Link
32,46
Recording time in EP mode
Repeat Play
RGB
44
53
16,46
Finalize
50
46
25,26
49
FL Display
Folder
Format Disc
RQTD0191-2B
F18G05-0
Download from Www.Somanuals.com. All Manuals Search And Download.
|