iConverter
®
iConverter NMM
Network Management Module
The iConverterNetwork Management Module (NMM) is the heart
of the iConverter management system. It supports SNMPv1,
SNMPv2c, SNMPv3 and Telnet protocols, and features a 32-bit,
high performance RISC microprocessor executing a real-time
operating system. SMNPv3 provides secure access to devices
by a combination of authenticating and encrypting packets over
the network.
The NMM manages all converters and chassis power supplies
within its management domain (modules and chassis connected
to the NMM), continuously collecting status and module
information. It reports the collected status via the SNMP
protocol to the network management applications.
The NMM features a serial port for initial configuration, a
front-plane RJ-45 Ethernet port, a backplane Ethernet port and
a pair of multi-chassis cascade ports.
„
„
The iConverter NMM provides real-time management,
trap notification and remote configuration of iConverter
equipment within the same domain
The Ethernet backplane port is used to connect adjacent
iConverter modules in the same chassis (in-band management),
offering direct Ethernet backplane access to the NMM. External
management (out-of-band) is accomplished via the front-plane
Ethernet port, facilitating IP based element management using
NetOutlook® or third-party SNMP management applications.
Utilizes IEEE 802.3ah and Omnitron’s Secure
IP-Less OAM management channels for managing
remote chassis in the same domain
„
„
„
Up to nineteen chassis can be linked to form a domain
and be managed by a single IP address
The NMM utilizes Operations,Administration and Maintenance
(OAM) services for carrier-grade network access with
comprehensive provisioning and network monitoring. It features
IP-based and IP-less management ofiConverter equipment within
the management domain.
Managed via the Ethernet backplane, the front-plane
RJ-45 Ethernet port, or the front-plane serial port
Supports SNMPv1, SNMPv2c, SNMPv3 and Telnet
protocols
The NMM supports IP-less management through the IEEE
802.3ah management channel and Omnitron’s Secure and
encrypted management channel. With IP-less management,
an NMM in a chassis at the network core can manage up to 18
iConverterNetwork Interface Devices (NIDs) at different edge
locations with a single IP address. This capability simplifies IP
address management, improves network security, and conserves
the use of IP addresses.
„
„
Supports Dying Gasp power loss trap notification
SNMP management via Omnitron’s NetOutlook
management software, or third-party SNMP
management software
„
„
„
Password protected to prevent unauthorized access
LED displays for immediate visual status of each port
When managing high-density configurations in a Central Office
or network core, the NMM can cluster (daisy-chain) up to 19
chassis into a single IP address. In this configuration, NMM
modules within each chassis are connected to each other over
a high speed serial connection.
Hot-swappable in 19-Module, 5-Module, or 2-Module
chassis
„
Lifetime Warranty and free 24/7 Technical Support
Download from Www.Somanuals.com. All Manuals Search And Download.
|