Operating instructions
for Washing machine
W 2839i WPM
en - GB
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 590 880
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 35
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Fabric conditioners and liquid starch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
External casing and fascia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cleaning the detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Problems with the load size indicator or calibrating to zero . . . . . . . . . . . . . . . . . 44
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
The door will not open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Opening the drum door in the event of a blocked drain outlet
and/or power failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Optional spare parts and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Removing the transit fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Washer-dryer stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Building under a continous worktop / in a kitchen run . . . . . . . . . . . . . . . . . . . . . 58
Matching the fascia panel to the height of adjacent drawer fronts . . . . . . . . . . . . 59
Spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Removing the spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Fitting the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Front panel dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Fitting the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Fitting a door front panel made by another manufacturer. . . . . . . . . . . . . . . . . . . 61
Preparing the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Preparing the fixing points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Fitting a plinth facing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
The Miele water protection system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Notes for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
To open the Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Language ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Time (of day) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Longer pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
CareCollection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for our environment
Disposal of the packing
material
Disposal of your old machine
Electrical and electronic machines
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your machine.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your Dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
It must only be used as a domestic
~
This washing machine conforms to
appliance to wash items which are
specified by the manufacturer as being
washable on the care label.
current safety requirements.
Inappropriate use can, however,
lead to personal injury and damage
to property.
Any other usage is not supported by
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation of the
washing machine.
To avoid the risk of accidents and
damage to the washing machine,
please read these instructions
carefully before using it for the first
time. They contain important
This washing machine is not
~
intended for use by persons (including
information on its installation, safety,
use and maintenance.
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they are supervised whilst using it or
have been shown how to use it by a
person responsible for their safety.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
Safety with children
Correct application
Keep children away from the
~
This washing machine is not
~
designed for commercial use. It is
washing machine at all times. It is not a
toy! To avoid the risk of injury do not
allow children to play on or near it or to
play with its controls. Supervise
intended for use in domestic
households and in similar working and
residential environments such as:
children whilst you are using it.
– Shops
Older children may only use the
~
washing machine if its operation has
been clearly explained to them and
they are able to use it safely,
– Offices and showrooms
and by residents in establishments
such as
recognising the dangers of misuse.
– Hostels and guest houses
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Unauthorised repairs could result in
~
unforeseen dangers for the user, for
Before setting up the washing
~
machine, check it for any externally
which Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician.
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
visible damage.
Do not install or use a damaged
washing machine.
Before connecting the washing
~
machine, ensure that the connection
data on the data plate (voltage and
connected load) match the mains
electricity supply. If in any doubt,
consult a qualified electrician.
If the connection cable is faulty it
~
must only be replaced by a Miele
approved service technician to protect
the user from danger.
In the event of a fault or for cleaning
~
purposes, the washing machine is only
completely isolated from the electricity
supply when:
The electrical safety of this washing
~
machine can only be guaranteed when
continuity is complete between it and
an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and
where there is any doubt the household
wiring system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn, or the
screw-out fuse is removed (in
countries where this is applicable).
The Miele "Water protection system"
~
protects from water damage provided
the following conditions have been met:
– the machine is correctly plumbed in
and connected to the electricity
supply.
consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washing
~
– if a fault has been identified, the
machine must be examined by a
competent person before further use,
and repaired if necessary.
machine to the mains electricity supply
by an extension lead. Extension leads
do not guarantee the required safety of
the appliance (e.g. danger of
overheating).
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
Faulty components must only be
~
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
damage which may be caused by
cockroaches or other vermin will not be
covered by the machine guarantee.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This washing machine may only be
~
used in mobile installations such as
Turn off the stopcock if the machine
~
is to be left for any length of time (e.g.
holiday), especially if there is no floor
drain (gully) in the immediate vicinity.
ships if a risk assessment of the
installation has been carried out by a
suitably qualified engineer.
Flooding danger.
~
Do not make any alterations to the
~
washing machine, unless authorised to
If hooking the drain hose into a wash
basin, check that the water can drain
off quickly enough to prevent the sink
from overflowing. Make sure the drain
hose is secure, so that the force of the
water flowing out of the hose does not
dislodge it.
do so by Miele.
Correct use
Do not install your washing machine
~
in rooms where temperatures below
freezing may occur. Frozen hoses may
burst or split. The reliability of the
Take care to ensure that foreign
~
objects (e.g. nails, pins, coins, paper
clips) do not find their way into the
machine with the laundry. These may
damage components of the machine
(e.g. suds container, drum), which in
turn can result in damage to the
laundry.
electronic control unit may be impaired
at temperatures below freezing point.
Before using the washing machine
~
for the first time, check that the transit
bars at the rear of the machine have
been removed (see section on
"Installation and connection"). During
spinning, a transit bar which is still in
place may result in damage to both the
machine and adjacent furniture or
appliances.
If the correct amount of detergent is
~
dispensed, the machine should not
need to be descaled. If, however, you
do wish to descale the machine only
use proprietary non-corrosive descaling
agents and strictly observe the
instructions on the packaging. A
special descaling agent is available to
order from Miele or via the internet on
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Textiles which have been
Only remove laundry from the
~
~
pre-treated with solvent based cleaning washing machine once the drum has
agents must be thoroughly rinsed in stopped turning. Reaching into a
clean water before being washed in the moving drum is extremely dangerous
machine.
and could result in injury.
Never use solvent based cleaning
~
agents, e.g. those containing benzene,
Accessories
in this machine, as this may result in
damage to component parts and create
toxic fumes. Such agents also pose a
fire and explosion hazard.
Accessory parts may only be fitted
~
when expressly approved by Miele. If
other parts are used, guarantee,
performance and product liability
claims will be invalidated.
Never use solvent based cleaning
~
agents, e.g. those containing benzene,
to clean the outside surfaces of this
machine. They can cause damage to
plastic surfaces.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
Only use dyes specified by the
~
manufacturer as being suitable for use
in a domestic washing machine. Always
observe the manufacturer's instructions
carefully.
Colour run and dye removers
~
contain sulphur compounds which can
cause damage such as corrosion. Do
not use these products in this machine.
If detergent comes into contact with
~
the eyes, rinse them thoroughly with
lukewarm water immediately. If
swallowed, seek medical assistance
immediately and retain the packaging
or label for reference. Those with skin
problems or sensitive skin should avoid
their skin coming into contact with
detergent.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Control panel
aProgramme buttons with indicator
lights
eDisplay with Menu buttons
See the next pages for more
information.
For selecting a washing programme.
bExtra option buttons with indicator
lights
fStart/Stop button
For starting the programme selected
and cancelling a programme once it
has started.
Various extra options can be added
to the washing programmes.
cPC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
gK button
For switching the washing machine
on and off.
To save energy, the washing
machine will switch itself off
automatically 15 minutes after the
end of the programme/anti-crease
phase or after being switched on if
no other selection is made.
d+ button
For selecting delay start.
hDoor button
Opens the machine door.
iLoad/Detergent button
For calling up the load size or the
recommended amount of detergent,
and for calibrating the load size
sensor to zero.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Display
Selecting programmes via the
display
The display is used for the following:
By pressing the Further programmes
button, you can select one of the
following programmes:
Selecting and displaying settings
– Temperature
– Denim
– Spin speed
– Hygiene
– Soak duration
– Dark garments
– Curtains
– Delay start
– Cancelling a programme
– Safety lock
– Pillows
– Silks /
– Estimated programme duration
– Sportswear
– Outerwear
– Proofing
– Drain / Spin
– Separate rinse
– Starch
Selecting extra options via the
display
By pressing the Further extras button,
you can select (depending on the
programme) the following extra options:
– Soak
– Rinse hold
– Extra rinse
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the washing machine
Menu buttons
To alter a setting:
Cottons
Duration:
60°C
1:49 h
1600 rpm
Pressing the left hand Menu button
under 60°C alters the temperature and
pressing the right hand Menu button
under 1600 rpm alters the spin speed.
To confirm a setting:
Further programmes
Denim
Various settings are made via the Menu
buttons.
Continue
OK
They are used to alter or confirm the
value displayed above the vertical line.
Pressing the left hand Menu button
under Continue calls up further
programmes, and you can then confirm
your selection of the highlighted
programme by pressing the right hand
Menu button under OK.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Setting the language
Before using the machine for the first
time ensure that it is correctly
installed and connected. See
"Installation and connection". Also
check that the drain filter is securely
tightened to prevent the risk of water
leaks during use.
You will be asked to select the
language you require for the display. It
is possible to change the language at
any time via the Settings menu.
Sprache
deutsch
)
OK
This washing machine has
undergone a thorough functional test
in the factory and there will be some
residual water in the drum from this
process.
^ If the language shown is not the one
you want, select the language you do
want by pressing the left hand Menu
button under ). Confirm by pressing
the right hand Menu button under
OK.
The washing machine has a sensor
which measures the amount of laundry
in the drum. This determines the
amount of detergent required. To allow
the load size indicator to function
correctly, you must first run a wash
programme without any laundry and
without detergent.
Setting the time of day
The display for setting the time will
appear.
12:00
^ Open the stopcock.
Change
OK
^ Press the K button in.
^ Select the hours you want by
pressing the left hand Menu button
under Change, and confirm this with
the right hand Menu button under
OK.
If the washing machine is being
switched on for the first time, the
welcome screen will appear.
The welcome screen will appear in the
display every time the machine is
switched on until a programme lasting
longer than 1 hour has been
completed.
^ Then set and confirm the minutes.
The display for setting the language will
appear.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Reminder to remove transit bars
Calibrating the load sensor to zero
^ Switch on the washing machine.
^ Open the drum door.
To avoid the risk of damage, the
transit bars must be removed before
the machine is used for the first time.
See "Installation and connection" for
instructions on how to do this.
^ Press the Cottons programme button.
^ After removing the transit bars (if this
has not already been done by your
fitter) press the right hand Menu
button under OK.
Running your first programme
Your machine is now ready for the first
programme to be run.
15:00
Select programme
^ Press and hold the Load/Detergent
button pressed in until the following
message appears in the display:
^ Press the Cottons programme button.
Zero setting
^ Press the Start/Stop button.
:
OK
^ At the end of the programme switch
the machine off.
^ Switch off the washing machine.
Before you can use the washing
machine, the load sensor has to be
calibrated to zero as you would with
bathroom scales.
The machine is now ready for use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Washing environmentally and economically
Energy and water consumption
Detergent
– Water consumption and energy
usage are determined by the size of
the load.
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
To make the most out of your
machine, load the maximum dry load
for the programme you are using.
– Adjust the dosage to the degree of
soiling of the laundry.
– Reduce the amount of detergent for
smaller loads. Use the Load/
Detergent button.
– Use the Automatic and Express
programmes for small loads.
– When smaller amounts of laundry are
washed using the Cottons
Choosing the correct Extra option
(Short, Soak, Pre-wash)
programme, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
Select:
– A wash programme together with the
Short extra option for light to normal
soiling where there are no obvious
marks.
– Using the Cottons 60°C programme
instead of the Cottons 95°C
– A wash programme without any extra
options for normal to heavy soiling
with visible staining.
programme will give energy savings
of between 35% and 45%. This is
sufficient for most levels of soiling.
For stubborn or old stains, use the
Soak extra option.
– A wash programme together with the
Soak extra option for heavily soiled
laundry.
– The Pre-wash extra option for laundry
with large amounts of dirt (e.g. dust,
sand).
When drying with a tumble dryer
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
Brief instructions
,If you use a solvent-based clean-
ing agent (e.g. one containing ben-
zene) to pre-treat a stain, make sure
that any plastic parts (e.g. buttons)
are protected, and that the cleaning
agent is rinsed off before washing the
garment in the machine.
The headings numbered A, B, C, . . .
show the operating sequence and can
be used as brief instructions.
ASort the laundry
,Do not use solvent-based
cleaning agents in or on this machine.
^ Sort the laundry by colour and by
care label. Most garments have a
textile care label in the collar or side
seam.
Dark textiles often contain excess dye
and should be washed separately
several times before being included in
a mixed load. Always wash whites and
coloureds separately.
^ Empty all pockets.
,Foreign objects (e.g. nails,
coins, paper clips, etc.) can cause
damage to garments and
– Curtains: Remove lead weights first
or place in a laundry bag.
components in the machine.
– Underwiring and collar stiffeners:
Any loose wiring in bras, shirt collar
stiffeners, etc. should be removed or
sewn in.
^ Badly soiled areas, stains etc. should
be cleaned as soon as possible,
preferably whilst still fresh. Spillages
should be carefully dabbed off using
a soft colourfast cloth. Do not rub!
– Knitted garments, trousers and
jeans, T-shirts and sweat shirts: Turn
inside out, if recommended by the
manufacturer.
Badly soiled areas can be pre-treated
with liquid detergent, stain removers
etc. first, following the manufacturer's
instructions. With particularly stubborn
stains ask your dry cleaner for advice.
– Close any zips, fasten hooks and
eyes etc before washing.
– Fasten duvet covers etc. to prevent
small items from being rolled up
inside them.
Do not wash any items in this machine
which are specified by the
manufacturer as not washable on the
care label. (h symbol)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
BSwitch on the washing machine
DSelect a temperature / spin speed
The interior drum lighting will come on.
The suggested temperature and/or spin
speed can be changed if required.
All the programme indicator lights will
come on, and the display will ask you to
select a programme.
Cottons
Duration:
60°C
1:49 h
CSelect a programme
1600 rpm
^ By pressing the left hand Menu
button under 60°C you can alter the
temperature, and by pressing the
right hand Menu button under
1600 rpm you can alter the spin
speed or deselect it.
Pressing the Further programmes
button calls up a list of additional
programmes.
Further programmes
Denim
^ Press the button for the programme
you wish to run.
Continue
OK
Now only the indicator light for the
selected programme will be lit up,
and this will be highlighted in the
display.
^ Pressing the left hand Menu button
under Continue calls up the further
programmes, and you can then
confirm your selection of the
highlighted programme by pressing
the right hand Menu button under
OK.
Denim
Duration:
40°C
1:00 h
900 rpm
^ The suggested temperature and/or
spin speed can now be changed if
required.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
The display shows the amount of
laundry loaded in the drum as a % (in
25% steps) of the maximum load
permissible for the programme
selected.
^ Unfold the laundry and load loosely
in the drum. Mixing both large and
small items gives better wash results
and also helps distribute the load
evenly during spinning.
The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this causes creases and reduces
cleaning efficiency.
^ Select any extra options by pressing
the appropriate button. The relevant
indicator light will come on to show
which extra option has been
selected.
Make sure that no garments are
caught between the drum door and
seal.
^ Press the Further extras button to
select the following extra options
(depending on the programme
selected): Soak, Rinse hold and Extra
rinse.
Not all the extra options are suitable for
use with every programme.
You can only select extra options which
are compatible with the basic
programme being used.
ELoad the drum
^ Press the Door button to open the
drum door.
^ Shut the door with a gentle swing.
The load size indicator display will
appear.
Load
<25%
B
Continue
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
FAdd detergent
It is important to dispense the correct
amount because . . .
When the door is closed, the load size
indicator will be replaced with the
detergent percentage display.
. . . too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
Detergent
75%
– Greasy particles clinging to the
laundry.
A
Back A
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
– Limescale deposits on the heater
elements.
. . . too much detergent results in:
40% = Add slightly less than half
the amount recommended
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
50% = Add half the amount
recommended
– High water consumption (an
additional rinse cycle will
automatically switch in).
60% = Add slightly more than half
the amount recommended
75%
= Add three quarters of
the amount recommended
– A burden to the environment.
100% = the full amount of detergent
recommended
You also need to take the level of
soiling and water hardness into
account.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
GSelect Delay start (if required)
^ Press the + button to set the time
you wish to programme to end at.
See "Delay start" for more information.
HStart the programme
^ Press the flashing Start/Stop button.
If a delay start time has been set, then
this will count down in the display. At
the end of the delay start time or
immediately after the programme has
started (if no delay start time has been
selected) the estimated programme
duration will appear in the display.
During the first 8 minutes the machine
measures how much water is being
absorbed by the laundry. The
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
i
Detergent for the pre-wash (divide
the total recommended amount as
follows: add 1/3 to compartment i
and 2/3 to compartment j)
programme duration may be longer or
shorter depending on this absorbency
rate.
The programme sequence is also
shown in the display. The machine lets
you know which section of the
j
Detergent for the main wash,
including Soak if selected
programme has been reached.
§
The drum lighting switches off once the
programme has started.
Fabric conditioner or liquid starch
^ Close the detergent drawer.
See "Detergent" for further information.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
How to wash correctly
IRemove the laundry when the
programme has finished
In the anti-crease phase after the
programme has finished, the following
will appear alternately in the display:
Cottons
Anti-crease
60°C
1600 rpm
and
^ Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Programme finished
:
Unload the drum
before switching off
Important
^ Press the Door button to open the
Always remove the laundry before
switching the machine off. This is
important to ensure that the load size
indicator works correctly.
drum door.
The washing machine will switch off
automatically 15 minutes after the
end of the anti-crease phase. You will
need to press the K button to switch
it back on again.
^ Switch the machine off with the
K button.
^ Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
^ Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
Short
You can now use the display to select
the soak time you require.
For light to nomal soiling with no visible
staining.
Soak duration
Duration: 0:30 h
The duration of the main wash is
reduced.
Increase
OK
Water plus
^ Each time the left hand Menu button
under Increase is pressed, the soak
duration is increased by 30 minutes.
Confirm the duration required by
pressing the right hand Menu button
under OK.
The water level in the main wash and
the rinses will be increased if the Water
plus option is selected.
Pre-wash
Further extras
For laundry with large amounts of dirt
e.g. dust, sand.
9 Soak
Further extras
Continue
OK
^ Press the left hand Menu button
under Continue until Back appears
in the display and confirm this with
the right hand Menu button under
OK.
Soak
For heavily soiled and stained items
with protein stains (e.g. blood, fats and
oils, cocoa).
– To delete the soak time
A length of time of between 30 minutes
and 6 hours can be chosen in 30
minute increments for the soak
process.
^ Press the Further extras button, and
then the right hand Menu button
under OK to switch off Soak.
– To select the soak duration
^ Press the Further extras button.
Further extras
Rinse hold
See the next page.
Extra rinse
8 Soak
An additional rinse cycle is carried out
to achieve a better rinse result.
Continue
OK
^ Select Soak by pressing the right
hand Menu button under OK.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Spinning
Final spin speed
To omit the final spin (Rinse hold)
Programme
Cottons
rpm
1600
1200
600
^ Press the Further extras button and
select the Rinse hold setting. The
laundry will not be spun and will
remain suspended in the final rinse
water. This reduces creasing if the
laundry is not going to be removed
from the drum immediately after the
end of the programme.
Minimum iron
Delicates
Woollens
Automatic
Shirts
1200
1200
600
Express
1600
900
– To start the final spin:
Denim
Hygiene
1600
1200
600
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start/Stop button.
Dark garments
Curtains
Pillows
1200
400
Silks
– To end the programme:
Sportswear
Outerwear
Proofing
1200
800
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
1000
1600
1200
1500
Drain / Spin
Separate rinse
Starch
To omit rinse and interim spin and
the final spin (No spin)
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
^ Select No spin from the spin speed
menu. The laundry is not spun after
the final rinse. The water will drain
away and the machine will go straight
into the anti-crease stage. An
Rinse and interim spin
additional rinse is introduced if this
setting is selected with the Cottons,
Hygiene, Minimum iron, Express and
Automatic programmes.
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected in the
Cottons and Hygiene programmes, an
additional rinse is introduced.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Delay start
from 9:05
Change
9:05
to 10:49
Back A
BUse the left hand Menu button under
Change to select the time you want
the programme to end at.
The current time of day needs to
have been set for delay start to work
correctly.
The first press on the button will adjust
the programme end time to the next
half or full hour. Each subsequent press
on the button will delay the programme
end time by 30 minutes.
To select delay start
Delay start
from 16:16
Change
9:05
to 18:00
OK
CConfirm the time you require by
pressing the right hand Menu button
under OK.
To begin delay start
DPress the Start/Stop button.
Cottons
ASelect the programme you want and
then press the + button.
The display shows the start time: from
xxx, the time for the programme to end:
to xxx, and the current time.
Start in:
60°C
7:11 h
1600 rpm
The display will show when the
programme will be started in hours and
minutes.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
To alter delay start
To cancel delay start
You can subsequently select a later
programme end time if you wish.
^ Press the Start/Stop button.
The following will appear in the display:
^ Press the + button.
Stopped:
Delay start
from 16:16
Change
9:05
to 18:00
Delete
Cancel delay start
Continue
OK
^ Confirm by pressing the right hand
^ Use the left hand Menu button under
Change to alter the time you want the
programme to end at.
Menu button under OK.
^ Now you can select a different
programme, or
^ Confirm by pressing the right hand
^ Press the Start/Stop button to start
Menu button under OK.
the programme straight away.
To delete delay start
The actual load size can only be
determined accurately by the
machine once the programme has
started. The programme end time
may, therefore, be a bit later or
earlier than first indicated.
You can delete the delay start time and
start the selected programme straight
away.
^ Press the + button.
Delay start
from 16:16
Change
9:05
to 18:00
Delete
^ Press the right hand Menu button
under Delete.
^ Press the Start/Stop button to start
the programme straight away.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons 98E76*
Fabric
30°C to 95°C
Max. load 5.0 kg
Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse
Note for test institutes:
Short programme: 3.0 kg load and Short extra option
Minimum iron
30°C to 60°C
Max. load 2.5 kg
43218E76*
Fabric
Synthetics, mixed fibres and easy care cottons. If fabrics have a
high proportion of man-made fibres it is advisable to programme
the machine for "Gentle action". See "Settings menu".
Note
Reduce the spin speed for fabrics which crease easily.
Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse
Delicates 4321ac* cold to 60°C Max. load 1.0 kg
Fabric For delicate garments made of synthetic fibres, mixed fibres,
rayon and easy care cottons.
Extra options Pre-wash, Soak, Short, Rinse hold
Woollens /ac* cold to 40°C
Fabric
Max. load 2.0 kg
Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.
Extra option Rinse hold
Automatic 7621*
cold to 40°C
Max. load 3.0 kg
Fabric
Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Extra option Rinse hold
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Shirts
cold to 60°C
Max. load 1.5 kg
Notes
– Pre-treat collars and cuffs if necessary.
– Wash silk garments in the Silks programme.
Extra options Short, Water plus, Rinse hold
Express 76* cold to 40°C
Fabric Small loads of items which require freshening up and which can
be washed in a Cottons programme.
Extra options Water plus, Rinse hold, Extra rinse
Max. load 2.5 kg
Denim
cold to 60°C
Max. load 2.0 kg
Notes
– Wash denim inside out.
– Denim often contains excess dye and will run during the first
few washes. Wash light and dark coloured items separately.
Extra options Pre-wash, Soak, Short, Rinse hold
Hygiene 8*
60°C
Max. load 5.0 kg
Fabric
Fabrics which will be in direct contact with the skin, e.g.
underwear, nappies, towelling, bed linen, pillow and mattress
covers.
Note
There is a longer temperature holding time in the main wash.
Extra options Pre-wash, Soak, Water plus, Rinse hold, Extra rinse
Dark garments cold to 40°C Max. load 3.0 kg
Garment
Note
Dark garments made from cotton or mixed fibres.
Wash inside out.
Extra options Short, Rinse hold
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Curtains
cold to 40°C
Max. load 1.0 kg
Item
Curtains, including net curtains, specified as machine-washable
by the manufacturer. A pre-rinse without detergent is carried out
automatically to remove dust.
Note
For curtains which crease easily, reduce the spin speed or
deselect the spin.
Extra options Water plus, Rinse hold
Pillows
40°C to 60°C
2 pillows (40 x 80 cm) or
1 pillow (80 x 80 cm)
Item
Note
Washable pillows with feather, down or synthetic fillings.
Please observe the instructions on the wash care label.
Extra options Water plus, Rinse hold
Silks /c*
cold to 30°C
Max. load 1.0 kg
Fabric
Silks and other handwashable fabrics with no wool content, e.g.
satin, lace and silk.
Note
Place tights, bras etc. in a washing bag.
Extra options Water plus, Rinse hold, Extra rinse
Sportswear
30°C to 60°C
Max. load 1.5 kg
Garment
Lightly soiled sports garments which require washing or
freshening up.
Extra options Pre-wash, Soak, Short, Water plus, Rinse hold
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Outerwear
cold to 40°C
Max. load 2.0 kg
Garment
Notes
Outerwear made from micro-fibres such as Gore-Tex®,
SYMPATEX® WINDSTOPPER® etc.
– Zip up jackets before washing.
– Do not use fabric conditioner.
Extra options Pre-wash, Soak, Short, Water plus, Rinse hold
Proofing
40°C
Max. load 2.0 kg
Item
For treating microfibre fabrics, skiwear, fine, closeweave cotton
garments (poplin) or tablecloths to provide a water and dirt
resistant finish.
Notes
– The items should be freshly laundered and spun or dried
before proofing.
– For best results, the items should be heat-treated afterwards,
either in a tumble dryer or by ironing.
Extra option Rinse hold
Drain / Spin
Max. load 5.0 kg
Notes
– Drain only: Select No spin.
– Make sure you select the appropriate spin speed.
Separate rinse
Extra option Rinse hold
Starch
Max. load 5.0 kg
Max. load 5.0 kg
Note
The laundry (table cloths, napkins, overalls) should be washed
but not treated with fabric conditioner.
Extra option Rinse hold
* Please note that the "buckets" represent garment care label symbols. See
"Garment care label symbols".
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
Main wash
Rinses
Spinning
Water
Wash
Water Rinses
level
Interim
Final spin
level
d
(
e
e
(
e
d
(
(
(
(
(
e
d
e
(
–
rhythm
spin
L
L
–
Cottons
a
c
(
e
e
e
e
e
d
e
(
d
d
e
e
d
e
–
2-43)4)
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Minimum iron
Delicates
Woollens
Automatic
Shirts
2-35)
d
3
e
2
L
L
–
abc
c
2-35)
2
Express
b
2-35)
L
–
Denim
c
3
3-44)
3
Hygiene
b
L
L
–
Dark garments
Curtains1)
Pillows2)
b
d
3
d
3
–
Silks
e
2
–
Sportswear
Outerwear
Proofing
c
2
L
L6)
–
d
3
d
–
Drain / Spin
Separate rinse
Starch
–
–
–
–
–
–
e
–
2
–
(
c
–
–
d = Low water level
( = Medium water level
e = High water level
a= Intensive rhythm
b= Normal rhythm
c= Gentle rhythm
d= Sensitive rhythm
e= Handwash rhythm
See the following page for more information about the programme sequences.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme sequence
This machine has fully electronic
controls with automatic load
Special features in the programme
sequences:
recognition. It takes in the right amount
of water required for the programme
depending on the amount of laundry
and its absorbency rate. This means
that programme cycles and durations
can vary.
Anti-crease:
At the end of every programme, with
the exception of the Woollens
programme, the drum continues to turn
at intervals for up to 30 minutes to help
prevent creasing. The door can be
opened and laundry removed at any
time during the anti-crease phase.
The programme sequences outlined in
the chart are based on the basic
programme with a full load. Extra
options which can be selected have not
been taken into account.
1)
Pre-rinse: A pre-rinse without
detergent is carried out automatically
to remove dust.
The display shows the stage the
programme has reached.
2)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate the pillows.
Subsequent water intake for the main
wash is through compartment j.
3)
A second rinse is carried out when a
temperature of 60°C to 95°C has
been selected. A third rinse is
carried out when a temperature
below 60°C is selected.
4)
A third/fourth rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– No spin has been selected
5) A third rinse is carried out if:
No spin has been selected
6)
In the Outerwear programme,
laundry is only spun after the main
wash.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Garment care label symbols
Washing
Ironing
The figure quoted in the bucket is the
maximum temperature the garment
can be washed at. The number of
bars under the symbol indicates the
level of agitation permitted.
The number of dots indicates the
ironing temperature
I
H
G
Hot iron (max sole plate temp.
approx. 200°C)
Medium hot iron (max sole
plate temp. approx. 150°C)
9
4
c
/
No bar under the symbol: =
normal agitation
Cool iron (max sole plate
temp. approx. 110°C). Do not
steam iron garments carrying
this symbol.
One bar under the symbol: =
reduced agitation
Two bars under the symbol: =
much reduced agitation
J
Do not iron
Hand wash (if no temperature
is specified use the lowest
temperature or cold)
Professional cleaning
f
p
Dry clean only. The letters
indicate the type of cleaning
agent required.
h
Do not wash
w
Professional Wet Clean only
Do not dry clean
Drying
D
The number of dots indicates the
drying temperature
Bleaching
q
r
s
Normal temperature
Low temperature
Do not tumble dry
x
{
Any oxidising bleaching
agent can be used
Only use an oxygen based
bleach or a non-chlorine
bleach
z
Do not bleach
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Cancelling a programme
Interrupting a programme
You can cancel a programme at any
time after it has started.
^ Switch the machine off with the K
button.
^ Press the Start/Stop button.
Stopped:
To continue with the same programme:
^ Switch the machine back on with the
K button.
Cancel programme
Changing a programme
Continue
OK
After the start of a programme it is no
longer possible to select a different
programme.
^ Press the right hand Menu button
under OK.
The suds will be pumped away.
If you want to remove the laundry:
^ Press the Door button.
Temperature
It is possible to select a different
temperature up to 5 minutes after the
programme has started.
If you want to select a different
programme:
Spin speed
^ Switch the machine off with the K
button.
It is possible to change the spin speed
up until the final spin begins.
^ Switch the washing machine back on
again.
Extra options
^ Check that there is still detergent in
the detergent drawer. Add detergent,
if necessary.
It is possible to select or deselect the
Short and Water plus extra options up
to 5 minutes after the programme has
started.
^ Select and start a new programme.
It is not possible to make any
changes if the safety lock has been
activated.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Adding or removing laundry
Safety lock
after a programme has started
The safety lock prevents the machine
from being opened or the
programme cancelled during a wash
programme.
^ Press the Door button to open the
drum door.
^ Add or remove items.
^ Close the drum door.
To activate the safety lock
The programme will continue
automatically.
^ Press and hold in the Start/Stop
button after the programme has
started.
Please note:
Stopped:
Once a programme has started the
machine cannot recognise any
adjustment to the load.
Cancel programme
Continue
OK
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
which can lead to an increase in the
programme duration shown in the
display.
By pressing the left hand Menu button
under Continue, the following will
appear in the display:
Activate safety lock
^ Confirm by pressing the right hand
Menu button under OK.
The door cannot be opened, if:
The following will appear in the display:
– the suds temperature is above 55°C.
– the water is above a certain level.
0 Locked
The safety lock is now activated. It is
deactivated automatically at the end of
the programme.
– the programme has reached the
Final spin stage.
To deactivate the safety lock
If you press the Door button when the
above conditions are present, the
following will appear in the display:
^ Press the Start/Stop button.
The following will appear in the display:
/ Door locked
Deactivate safety lock
^ Press the right hand Menu button
under OK, and then the following will
come up in the display:
1 Unlocked
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The correct detergent
All modern detergents produced for automatic washing machines are suitable.
Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets
are suitable for full loads, but note that it may be impractical to reduce tablets for
smaller loads. Some tablets do not dissolve as rapidly as others, and may not be
suitable for programmes with short durations.
Do not use biological detergents on silk as the enzymes may damage the silk!
Instructions for use and recommended dosage amounts are given on the
detergent packaging.
Liquid detergent should be dispensed using a ball provided by the manufacturer
for programmes without a pre-wash.
For programmes with a pre-wash you will need to purchase a special container
from the Miele Spare Parts department which sits in the main wash compartment
j of the detergent dispenser drawer. Add liquid detergent to this container for
the main wash and to compartment i for the pre-wash.
All purpose detergent
for whites*
Detergent for coloured
fabrics*
Detergent for delicates
Cottons
X
X
X
X
Minimum iron
Delicates
Woollens
Automatic
Shirts
X
Liquid detergent for machine-washable woollens
X
X
X
X
X
X
Express
1)
X
Denim
Hygiene
Dark garments
Curtains
Pillows
X
1)
X
2)
2)
X
X
X
1)
1)
X
Silks
Liquid detergent for machine-washable silk and woollens
Sportswear
Outerwear
Proofing
X
X
X
Only use proofing agents which are stated by the manufacturer as being "suitable
for use on membrane textiles" as these consist of fluorochemical compounds. Do
not use proofing agents which contain paraffin. Add proofing agents to
compartment §.
Starch
Liquid starch, starch formulations, viscous liquid starch, fabric conditioner
1)
Only use liquid detergent
2)
Only use powder detergent or detergent specifically designed for washing
curtains
* Powder detergent, tablet detergent, liquid detergent and liquid tab detergent.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
The right amount to dispense will
depend on the following:
Water softener
A water softener can be used to cut
down on the use of detergents in hard
water areas. Dispense according to the
amount specified on the packaging.
First add detergent and then the water
softener.
– The quantity of the laundry
– The soiling level of the laundry
Lightly soiled
No visible dirt or stains. Possibly
slight body odour.
Miele branded water softening tablets
are available from the Miele Spare Parts
Department or via the internet on
Normally soiled
Visibly dirty and/or just a few slight
stains.
Heavily soiled
Use a quantity of detergent as for soft
water.
Stains and soiling clearly visible.
– The water hardness level.
Check with your local water supplier
if you do not know the hardness level
in your area.
Miele do not recommend connecting
the machine to a household water
softener.
Washing with several
components
If you wash using several components
(e.g. special application detergents),
we recommend always dispensing the
agents into compartment j in the
following order:
1. Detergent
2. Water softener
3. Stain remover
This way the agents are distributed
more evenly.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergent
Fabric conditioners and liquid starch
If starching frequently, thoroughly
clean the dispenser compartment,
especially the siphon tube and
fabric conditioner channel, regularly.
See "Cleaning the detergent
dispenser drawer". Do not use
powder starch formulations or
viscous liquid starch in the §
compartment as it will clog up. See
below.
Fabric conditioners make garments soft
to handle and help prevent static cling
when tumble drying.
Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.
Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme
Adding fabric conditioner or starch
separately
^ Dispense in accordance with
manufacturer's instructions on the
packaging.
^ Add powder or viscous starch to
compartment i.
^ Add fabric conditioner or liquid
starch to compartment §.
^ Press the Further programmes
button, and select the Starch
programme.
^ Add the fabric conditioner or liquid
starch to compartment §. Do not
exceed the maximum level mark.
^ Select a spin speed or the Rinse hold
extra option.
It will be automatically dispensed in the
last rinse. At the end of the programme
a small amount of water remains in the
fabric conditioner compartment §.
^ Press the Start/Stop button.
Colour run and dye removers/dyes
^ Do not use colour run or dye
removers in this machine.
^ Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Follow the
manufacturer's instructions carefully.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Extra cleaning
,Disconnect the machine from the
mains electricity supply and
Carry out a hot wash (70°C or above)
with powder detergent approx. every 6
weeks to help prevent deposits building
up in the machine. These can occur
when washing is mainly done at low
temperatures, and can lead to
withdraw the plug from the socket
before cleaning the machine.
,The washing machine must not
be hosed down.
unpleasant smells. If you have no
reason to wash occasionally at this high
temperature, then run a Cottons 95°C
programme with detergent but no
laundry at regular intervals.
A range of Miele branded cleaning and
conditioning agents is available to
order from the Miele Spare Parts
Department, or via the internet on
Cleaning the detergent
dispenser drawer
External casing and fascia
panel
For hygienic reasons, clean the entire
drawer at regular intervals.
Clean the casing using a Miele E-Cloth,
or with a mild, non-abrasive cleaning
agent or soap and water using a well
wrung-out cloth. Wipe dry with a soft
cloth.
^ The drum and any stainless steel
outer panels can be cleaned using a
suitable stainless-steel cleaning
agent following the instructions on
the packaging.
,Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaning agents.
These might damage plastic
surfaces and other components
because of the chemicals they
contain.
^ Pull out the detergent dispenser
drawer until a resistance is felt. Press
down the release catch and at the
same time pull the drawer right out of
the machine.
^ Clean the detergent drawer with
warm water.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the detergent dispenser
drawer housing
^ Clean the siphon.
1. Remove the siphon from
^ Use a bottle brush to remove
detergent residues and limescale
from the jets inside the detergent
dispenser drawer housing.
compartment § and rinse under
warm running water. Clean the
siphon tube in the same way.
2. Replace the siphon.
If starching frequently, thoroughly
clean the siphon and siphon tube
regularly. A build-up of starch will
cause them to get clogged.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the filter in the water
inlet
^ First turn off the stopcock.
^ Unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
The washing machine has a filter to
protect the water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^ Remove the rubber seal 1 from the
spigot nut.
^ Hold the free end of the inlet hose
upside down. The plastic filter 2 will
fall out.
^ Clean the plastic filter.
^ Put the filter and seal back in the
reverse order and reconnect the
hose.
Turn on the stopcock and check the
connection is watertight. If water drips
out, tighten the connection.
Never forget to put the filter back in
place after cleaning.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
Possible cause
Remedy
Check whether
The display remains
There is no power to
dark and the indicator the machine.
lights for the
– the mains plug is plugged
in and switched on.
programme buttons
are not lit up.
– the fuse or circuit breaker
has tripped.
You are asked to enter Access via a code has Enter the code and confirm
a code.
been activated.
the entry. Deactivate the
code if you do not wish this
message to appear in the
display the next time the
machine is switched on.
The display is dark.
The display has
switched off
Press a button. Standby
comes to an end.
automatically to save
energy (Standby
mode).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Fault messages in the display
Problem
Possible cause
Remedy A
Fault
2
– The water outlet is
blocked or
– Clean the drain filter and
the drain pump.
Check drainage
system
restricted.
– The drain hose has – The maximum delivery
been fixed too high.
head is 1 m.
Fault
2
The water inlet is
Check whether
Water intake
Open stopcock
blocked or restricted.
– the stopcock is opened
properly.
– the inlet hose is kinked.
– the water pressure is too
low.
Waterproof system
activated
L
;
The water protection
system has reacted.
– Close the stopcock.
– Call the Service
Department.
Close the stopcock
Technical fault.
Call the Service
Department
There is a fault.
Start the programme again.
If the fault message
appears again, contact the
Service Department.
The following flashes in Excessive foam has
Use less detergent next
time and follow the
the display:
built up during
washing.
Anti-crease
manufacturer's instructions
on dosage given on the
packaging.
alternately with
Check detergent
ATo switch off the fault message: Switch the machine off with the K button.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problems with the load size indicator or calibrating to zero
Problem
Possible cause
Remedy
The display indicates There was already
a load of <25% or no laundry in the drum
load size is indicated when the machine
^ To recalibrate the sensor to the
zero setting:
– Remove the laundry from the
drum.
when the drum is
full.
was switched on.
This has decalibrated
the sensor from the
zero setting.
– Switch off the washing
machine and leave the door
open.
– Switch on the washing
machine.
– Press the Cottons programme
button.
– Press and hold the Load/
Detergent button pressed in
until the following message
appears in the display:
Zero setting
OK.
The display indicates The load size sensor Rotate the drum once. If the
a load of 25%, 50%, has been display still indicates a load of
decalibrated from the 25%, 50%, 75% or 100%,
75% or 100% when
the drum is empty
zero setting.
recalibrate the sensor to zero
again (see above section)
The fault message:
The drum door is
closed.
– Open the drum door.
Zero setting
not possible
– Switch off the washing
machine and leave the door
open.
appears in the
display.
– Switch on the washing
machine.
– Try and recalibrate to zero
again.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
General problems
Problem
Possible cause
Remedy
The machine shakes
during the spin cycle.
The machine feet are not Level the machine (see
level.
"Installation and
connection").
The machine detected an Include both large and
The laundry has not
been spun properly and imbalance during the final small items in the load as
is still wet.
spin and reduced the
this will give better
spin speed automatically. distribution.
The laundry has not
The spin speed selected Select a higher spin
been spun satisfactorily. was too low.
speed next time.
The pump makes
strange noises.
This is not a fault! These noises occur at the end of
a pump sequence as a normal part of the operation.
There is a lot of
The water pressure is too – Clean the water inlet
detergent residue in the low.
detergent drawer.
filter.
– Select Water plus.
Powder detergent used
Add washing powder
with water softeners can and then add the water
be sticky.
softener.
Fabric conditioner is not The siphon tube is not
Clean the siphon, (see
completely dispensed or correctly positioned, or is “Cleaning and care -
too much water remains clogged up.
Cleaning the detergent
dispenser drawer”).
A different language has Set the language you
been selected in Settings want. The flag symbol
in the § compartment.
The display is in a
different language.
Language !.
will guide you.
When laundry is dry it
feels hard to the touch.
Too vigorous wash
action.
Programme in gentle
action and more water.
Not enough detergent
used.
Increase detergent dose
to prevent limescale
build up in laundry.
No fabric conditioner
used.
Use fabric conditioner in
last rinse.
Power cut
Once power has been restored, switch the washing
machine on with the K button to continue the
programme.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
An unsatisfactory wash result
Problem
Possible cause
Remedy
Liquid detergent
does not give the
required result.
Liquid detergents
usually contain no
bleaching agents.
They do not remove
fruit, coffee and tea
stains.
– Use a general purpose
detergent containing a
bleaching agent.
– Pour stain removers into
compartment j of the
dispenser drawer and liquid
detergent into a dispenser ball.
– Never put stain removers and
liquid detergent together in the
dispenser drawer.
Grey, greasy
Insufficient amounts of – Use more detergent.
detergent were used
particles cling to
washed laundry.
– Before washing the next load
to break down the
run a Cottons 75°C programme
with powder detergent but
without a load.
particles of grease in
heavily soiled laundry.
A stale smell is in
the drum and on
laundry.
Low temperature
washing.
– Before washing the next load
run a Cottons 75°C programme
with powder detergent but
without a load.
White residues
which look like
powder detergent
are seen on dark
textiles after
The detergent
– Try and brush off the residues
with a soft brush once the
laundry is dry.
contained compounds
(zeolites) to aid water
softening which are
not soluble in water.
They have ended up
on the laundry.
– Wash dark textiles using a
detergent which contains no
zeolites. Liquid detergents
usually contain no zeolites.
washing.
– Use the Dark garments
programme.
Clothes are coming The machine was
– Reduce quantity of clothes in
drum.
out creased.
overloaded.
The wrong
– Check care labels and the
programme chart.
programme was used.
– Use easy iron conditioners.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The door will not open
Possible cause
Remedy
The machine is not
connected to the
Insert the plug in the socket and switch on, and/or
switch the machine on with the K button.
electricity supply and/or is
not switched on.
The safety lock has been
activated.
Deactivate the safety lock as described in
"Changing the programme sequence - Safety
lock".
Access via a code has
been activated.
Deactivate the code as described in "Settings
menu".
Power cut.
Open the drum door as described in the next
section.
The door was not correctly Press hard against the lock side of the drum door
engaged.
and then press the Door button.
There is still water in the
drum and the machine is
unable to drain.
Clean the drain filter and drain pump as described
in the next section.
For safety reasons the drum door cannot be opened if the suds temperature is
higher than 55°C.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Opening the drum door in the
event of a blocked drain outlet
and/or power failure
^ Switch the washing machine off.
1. Drain the machine
If the drain outlet is blocked, (up to 25
litres) of water will be retained in the
machine.
,Caution: if laundry has been
washed at a high temperature, water
draining out of the machine will still
be hot. Danger of scalding!
^ Remove the stopper.
^ Once the flow of water ceases,
replace the stopper in the end of the
hose.
^ Use a screwdriver to open the flap in
the machine plinth.
^ Pull the flap and the drain hose
attached to it out of the machine.
^ Point the drain hose into a suitable
container.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
2. Open the drum door
Door hinged left
,Always make sure that the drum
is stationary before reaching into the
machine to remove laundry.
Reaching into a moving drum is
extremely dangerous.
Door hinged right
^ Use a screwdriver to push the
emergency door latch downwards
(see illustration). The drum door will
open.
3. Clean the drain filter
There is a lever behind the detergent
drawer fascia panel.
^ Use a screwdriver to push the
emergency door latch downwards
(see illustration). The drum door will
open.
^ Remove the lever.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
The drain filter access flap is visible
when the drum door is open.
^ Check that the impeller can turn
easily. Remove any foreign objects
(e.g. buttons, coins, etc.) and fluff.
Then clean the drain filter and the
drain filter housing.
^ Use the lever to open the access
flap.
^ Put the drain filter back in place and
secure.
,Make sure the drain filter is
securely tightened. Otherwise there
is a risk of water leakage during use.
^ Unscrew the drain filter completely.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, please
contact:
Future updates (PC)
The indicator light marked PC is the
interface used by Miele service
technicians during servicing work for
testing purposes and for updating the
machine's programme data.
– your Miele Dealer or
– Miele (see back cover for contact
details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your machine, both of which
are shown on the data plate visible
above the porthole glass when the door
is open.
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional spare parts and accessories
Optional spare parts and accessories
for this washing machine are available
from your Miele Dealer, the Miele Spare
Parts Department or via the internet at
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as
described in these instructions.
Please note that telephone calls may
be monitored and recorded for
training purposes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Front view
aFlexible stainless steel braided inlet
pressure hose
fAdapter strip
gDrum door
bElectricity supply cable
hAccess to drain filter and the pump
c Drain hose with flexible / detachable
swivel elbow
iAccess panel to the emergency door
release and drainage
dControl panel
jFour height adjustable screw feet
eDetergent dispenser drawer
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Rear view
aElectricity supply cable
cInlet hose (with flexible, waterproof
metallic outer sleeve)
bTransit bar covers
dDrain hose
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Installation surface
Installing the washing machine
A concrete floor is the most suitable
installation surface for a washing
machine, being far less prone to
vibration during the spin cycle than
wooden floorboards or a carpeted
surface.
To manoeuvre the machine out of its
packing case to its installation site, hold
it by the rear feet and by the handle
recesses at the front.
,Ensure that the machine feet and
the floor are dry to prevent the
machine from slipping during the
spin cycle.
Please note the following points:
^ The machine must be level and
securely positioned.
Removing the transit fittings
^ To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
^ We recommend the use of a plywood
base (at least 59x52x3cm). The base
should span several joists and be
bolted to the joists and not only to the
floorboards. Check for the presence
of pipes and cables first.
^ If possible, install the machine in a
corner as this is usually the most
stable part of the floor.
^ To remove the left and right covers
^ If the machine is installed on a raised
plinth, it has to be secured against
slippage during spin using retaining
clips (available from the Miele Spare
Parts Dept). Otherwise there is a
danger of the machine moving and
falling off the plinth.
1. Use a screwdriver to prise out the
cover as illustrated.
2. Pull the cover forwards to remove.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
^ Using the spanner supplied turn the
^ Turn the right-hand transit bar 90°,
left-hand transit bar 90°, then
then
^ withdraw the transit bar.
^ withdraw the transit bar.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
,The washing machine must not
be moved without the transit bars in
place.
,To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
Store them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again (e.g.
when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
^ Fit the covers onto the two holes.
Then plug the holes as shown with
the caps.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^ Use a spirit level to check the
machine is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,All four counternuts must sit
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
^ Using the spanner supplied turn
counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
Washer-dryer stack
A Miele tumble dryer can be stacked
on top of this washing machine. To do
this the appropriate "WTV" stacking kit
(available to order) to match your
washing machine is required.
,The stacking kit must be fitted by
suitably qualified fitter.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Building under a continous
worktop / in a kitchen run
– The slides* can be used to protect
the floor from damage when the
machine is pushed into position or
taken out for servicing.
N = Niche height (820 - 930 mm)
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
It is supplied with a cover plate,
instead of a lid, which is necessary
to ensure electrical safety and must
not be removed.
With niche heights of:
Niche height
(mm)
Accessory
820
None required
The washing machine must not be
used without the front panel in
place.
from 830 - 840 Fit longer screw feet*
(Set to approx.
40 mm)
from 870 -885 Use one raising kit*
from 915 -930 Use two raising kits*
* accessory available to order
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the washing machine.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Matching the fascia panel to
the height of adjacent drawer
fronts
Removing the spacer bars
All the spacer bars can be removed if
the upper edge of the front panel needs
to be flush with the upper edge of the
machine front directly underneath the
fascia panel. See "Fitting a front panel
made by another manufacturer".
Spacer bars
The fascia panel can be aligned with
the drawer fronts by adjusting the
spacer bars.
^ Open the door.
^ Using a socket spanner, turn
clockwise or anti-clockwise until the
required height is reached.
^ Unscrew and remove the 3 screws
(see arrows).
^ Remove all the spacer bars.
If necessary individual bars can be
removed or more added.
The 3 holes which are now free should
be used to screw the front panel to the
machine front later on.
^ To do this, use the socket spanner to
loosen the nuts.
An adapter kit with spacer bars and
longer screws can be ordered as an
optional accessory. This can be used to
add spacer bars from below up to a
maximum of 25 mm.
After fitting the bars, cut or pinch off
any excess length from the screws.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Fitting the front panel
Fitting the front panel
The machine front can be fitted with a
door panel to match other kitchen units.
^ Open the door.
^ Hold the front panel in the correct
position in front of the machine door.
If fitted in a Miele kitchen, the door
panel can be ordered pre-drilled with
the necessary fixing holes as an
optional accessory.
If fitted in a non-Miele kitchen, a
suitable panel will have to be drilled
to suit by a qualified kitchen fitter.
See "Fitting a door front panel made
by another manufacturer" for details
on preparing and drilling the fixing
holes.
Front panel dimensions
^ Screw the front panel to the machine
Width: 592 - 596 mm
door.
Thickness: 17 to 19 mm (corresponding
to the thickness of the adjacent unit
door front panels)
If all the spacer bars have been
removed:
You can also make use of the 3 holes at
the top of the door plate to screw the
front panel to the door plate.
Height: The height of the door front
panel corresponds to the door height
(H) of the adjacent units.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Fitting a door front panel made BMark the two hinge holes and the
four smaller holes as shown in the
by another manufacturer
diagram.
Preparing the front panel
Depending on country this machine
AMeasure distance X for drilling the
hinge holes.
is supplied either left or right hand
hinged.
– with spacer bars:
For left hand hinging only:
– front panel shown decor side face
down, upper edge at the bottom:
– without spacer bars:
if width (b) increases, measurement a
must also be increased
b = 592 mm N a = 21.5 mm
b = 593 mm N a = 22.0 mm
b = 594 mm N a = 22.5 mm
b = 595 mm N a = 23.0 mm
b = 596 mm N a = 23.5 mm
The height H of the door front panel
corresponds to the door height of the
adjacent units.
(the front panel must be
correspondingly higher)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
For right hand hinging only
CDrill the two hinge holes (C 35 mm/
15.5 mm deep) in the back of the
front panel.
– front panel shown decor side face
down, upper edge at the bottom:
DNext, drill the four smaller holes
(C 7 mm/10 mm deep) in the back of
the front panel.
EShorten the front panel from the
bottom to height H.
Preparing the fixing points
FHold the pre-drilled front panel in the
correct position in front of the
machine door.
if width (b) increases, measurement a
must also be increased
b = 592 mm N a = 21.5 mm
b = 593 mm N a = 22.0 mm
b = 594 mm N a = 22.5 mm
b = 595 mm N a = 23.0 mm
b = 596 mm N a = 23.5 mm
The height H of the door front panel
corresponds to the door height of the
adjacent units.
GMark the fixing points on the back of
the front panel through the holes in
the machine door plate (see arrows
in the illustration).
HRemove the front panel.
INow drill holes (C 2.5 mm/10 mm
deep) in the back of the front panel.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Fitting a plinth facing
Installation
The gap between the lower edge of the
washing machine plinth and the floor
can be closed up using a suitable
kitchen furniture plinth facing.
The washing machine plinth has a
special groove in which a plinth facing
can be fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
^ Calculate height (H) from the floor up
into the groove (on the underside of
the washing machine).
Height (H): The plinth facing height
must be calculated after aligning the
height of the machine with the screw
feet or after fitting the raising kit(s).
^ Cut the plinth facing to size.
^ Slide it into the groove.
Useful tip:
If the machine is fitted on a raising kit,
you can use double-sided adhesive
tape on the back of the plinth facing to
secure it to the raising kit.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
The Miele water protection
system
– Overflow protection
This prevents the washing machine
taking in too much water. If the
water level exceeds a certain level,
the drain pump switches in and
pumps the excess water away.
The Miele water protection system
protects the washing machine from
water damage.
The system consists of three main
components:
3) Drain hose
1) the inlet hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being
emptied completely.
2) the electronic unit and the washing
machine housing
3) the drain hose
1) Inlet hose
– The inlet hose can withstand
pressure of more than 14,000 kPa
– The inlet hose has a protective
sleeve which is made from metal to
protect the hose from damage.
2) Electronic unit and washing
machine housing
– Sump
Any leaking water is collected in a
sump in the base of the appliance. A
float switches off the safety valves,
preventing any more water flowing
into the machine and water in the
suds container is pumped away.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the water
supply
The dirt filter in the union at the open
end of the inlet hose must not be
removed.
The machine should be connected to a
mains water supply in accordance with
local and national safety regulations.
The German authorities do not require it
to have a non-return valve as the
Extension hose
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
washing machine has been designed
to comply with DIN regulations.
The machine is designed to operate
with a flow pressure of between
100 kPa and 1,000 kPa. If it is higher
than 1,000 kPa it is essential to fit a
reducer valve.
This hose is tested to withstand
pressures of up to 14,000 kPa and can
be used as a flexible extension to the
water supply.
Connection to the mains water supply
should incorporate a mains stopcock
with 3/4" thread. The stopcock should
be fitted by a qualified plumber.
,The connection point is subject
to mains water pressure. Turn on the
stopcock slowly and check for leaks.
Correct the position of the washer
and union if appropriate.
The washing machine is not suitable
for connection to a hot water supply.
Maintenance and care
Only use a genuine Miele flexible
stainless steel braided pressure hose
should you ever need a replacement or
extension. These are tested to
withstand pressure of at least
14,000 kPa.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Connection to the drainage
system
Please note:
The machine drains via a drain pump
with a delivery head of 1 metre*. The
drain hose must not be kinked as this
restricts drainage. The swivel elbow at
the end of the hose can be turned in
either direction, or can be detached if
required, with a sharp twist and pull.
If required, the drain hose can be
extended to a length of 5 m. The
necessary parts can purchased from
the Miele Spare Parts Department or
your Miele dealer.
aAdapter
bNut
* For a delivery head of more than 1 m
(up to a max. of 1.8 m) a replacement
drain pump will need to be fitted.
Please contact the Miele Spare Parts
Department or your Miele Dealer.
cHose clip
dEnd of the hose
^ Fit adapter a to the sink drain outlet
using nut b.
Drain hose connection:
1. Direct into a sink or basin:
Please note the following:
^ Attach the end of the hose d to
adapter a.
^ Use a screwdriver to tighten hose
clip c up close to the nut.
– Hook the hose over the edge and
secure.
– Make sure that the water can drain
away freely without hindrance.
Otherwise there is a risk of water
overflowing or of some of the drained
water being sucked back into the
machine.
2. Connected securely to a plastic
drain pipe with a rubber nipple.
There is no need to use a non-return
valve.
3. Connected securely to a standpipe.
4. Connected securely to a floor gully.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
WARNING: THIS APPLIANCE
MUST BE EARTHED
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to protect
the machine with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Load
Consumption data
Water Duration
Energy
in kWh
1.70
in litres
42
Short
Normal
Cottons
95°C
5.0 kg
5.0 kg
2.5 kg
5.0 kg
2.5 kg
2.5 kg
1.0 kg
2.0 kg
3.5 kg
1.5 kg
2.5 kg
2.0 kg
5.0 kg
3.0 kg
1.0 kg
1 pillow
1.0 kg
1.5 kg
2.0 kg
2.0 kg
2 h 09 min
1 h 49 min
1)
60°C
60°C
0.85
42
0.70
36
1 h 26 min
1)
40°C
40°C
40°C
0.52
52
2 h 04 min
2)
1)
0.36
36
1 h 26 min
Minimum iron
Delicates
Woollens /
Automatic
Shirts
0.44
49
59 min
1 h 19 min
59 min
30°C
30°C
40°C
60°C
40°C
40°C
60°C
40°C
40°C
60°C
30°C
40°C
40°C
40°C
0.33
69
49 min
0.22
35
–
39 min
0.35 - 0.50
0.90
40-55
52
–
1 h 18 min
1 h 12 min
30 Min.
1 h 02 min
Express
0.30
30
–
Denim
0.50
52
50 min
1 h 00 min
2 h 20 min
1 h 15 min
55 min
Hygiene
1.30
52
–
Dark garments
Curtains
0.60
60
1 h 05 min
0.45
38
–
Pillows
0.80
39
–
1 h 20 min
36 min
Silks /
0.24
39
–
Sportswear
Outerwear
Proofing
0.35
35
47 min
53 min
–
1 h 07min
1 h 03 min
29 min
0.45
59
0.30
12
Notes for test institutes:
1)
EN 60456 test programme
2)
Short programme for test institutes; the Short extra option must be selected.
Consumption data can vary from the nominal values given depending on water
pressure, water hardness, water inlet temperature, room temperature, type and
volume of load, fluctuations in the electricity supply and any extra options
selected.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
820 mm
Width
595 mm
Depth without lid
Depth with door open
Weight
575 mm
1180 mm
94 kg
Capacity
5 kg dry laundry
see data plate
see data plate
Voltage
Connected load
Fuse rating
see data plate / plug
see "Consumption data"
100 kPa (1 bar)
1.000 kPa (10 bar)
1.60 m
Consumption data
Water flow pressure minimum
Water flow pressure maximum
Inlet hose length
Drain hose length
Mains connection cable length
Delivery head max.
Maximum drainage length
LEDs
1.50 m
1.60 m
1.00 m
5.00 m
Class 1
Test certificates awarded
see data plate
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
for changing default settings
The Settings menu can be used to alter the machine's electronics to suit
changing requirements.
Settings can be altered at any time.
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
To open the Settings menu
Time (of day)
^ Connect the machine to the
First select either a 24 hour or 12 hour
clock. You can then set the current time
of day.
electricity supply.
^ Switch on the washing machine.
^ Press both menu buttons at the same
time until the following appears in the
display:
Clock format
^ Select the clock format you want with
the left hand Menu button under
Continue, and confirm your selection
with the right hand Menu button
under OK.
Settings
Language !
Continue
OK
Set the time of day
You are now in the Settings menu.
^ Select the Set the time of day
sub-menu and use the Menu buttons
to set the time.
^ Select the setting you want with the
left hand Menu button under
Continue, and confirm your selection
with the right hand Menu button
under OK.
Language
!
The display can be set to appear in
one of several different languages.
You can select the language you want
via the Language sub-menu.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
A tick L will appear beside the
language to show that it has been set.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Gentle action
Suds cooling
Activating gentle action reduces the
drum action and is suitable for
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
washing slightly soiled items more
gently. It should be activated for
garments with a single bar under the
care label and for articles which feel
too hard after they have been dried.
Suds cooling takes place when
temperatures of 95°C and 75°C are
selected.
Gentle action can be activated for the
Cottons and the Minimum iron
programmes.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
The machine is delivered with the
Gentle action setting deactivated.
A tick L will appear beside the option
– where the drainage pipes do not
comply with DIN 1986.
to show that it has been set.
The machine is delivered with Suds
cooling deactivated.
Longer pre-wash
The pre-wash for the Cottons
programme can be extended by 6, 9
or 12 minutes.
A tick L will appear beside the option
to show that it has been set.
The default setting for the pre-wash is
25 minutes.
If you require a longer pre-wash, it can
be extended.
A tick L will appear beside the option
to show that it has been set.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Lock code
Lock code
The code prevents your machine
being used without your knowledge.
1 2 5
When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.
Back A
OK
^ Confirm the code by pressing the
right hand Menu button under OK or,
if you have made a mistake, press
the left hand Menu button under
Back A.
To activate the Lock code
Lock code
The following will appear in the display:
Activate
Continue
OK
X
Lock code activated.
Entry OK
^ Press the right hand Menu button
under OK.
Once the machine is switched off, it
can only be used again if the code is
entered.
^ The display will now request that a
code is entered. The code is 125 and
cannot be altered.
To use the washing machine when
the code is activated
To enter the Lock code
Lock code
When the machine is switched on
again, the display will request the code.
0 0 0
^ Enter code 125 as described above
*
OK
and confirm the entry.
^ Enter the first number with the left
hand Menu button under *. Confirm
your selection of this number by
pressing the right hand Menu button
under OK. Now enter the second
number.
The washing machine is now unlocked
and ready for use.
To deactivate the Lock code
Proceed as for activating the code.
^ Repeat the process until all three
numbers have been entered.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Temperature unit
Keypad tone
You can chose for the temperature to
be displayed in °C/Celsius or
°F/Fahrenheit.
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone switched off.
A tick L will appear beside the option
to show that it has been set.
A tick L will appear beside the option
Buzzer
to show that it has been set.
An audible tone sounds repeatedly at
the end of a programme and when
Rinse hold is reached.
Brightness
There are ten different display
brightness settings.
There are two volumes:
The machine is delivered with the
display brightness on setting 5.
Off
(default setting)
The buzzer is switched off.
This will change as soon as a different
setting is chosen.
Contrast
Normal
The buzzer sounds at the end of a
programme or when Rinse hold is
reached.
There are ten different display
contrast settings.
The machine is delivered with the
display contrast on setting 5.
Loud
The buzzer sounds at maximum volume
Loud at the end of a programme or
when Rinse hold is reached.
This will change as soon as a different
setting is chosen.
A tick L will appear beside the option
to show that it has been set.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu
Standby display
Memory
To save energy, the display goes out
and the indicator light for the Start/
Stop button will start flashing slowly.
If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
The display will always go out,
– if a programme is not selected within
10 minutes of the machine being
switched on.
When this programme is chosen again
these settings will appear in the
display.
– 10 minutes after the end of a
programme.
The machine is delivered with the
memory function deactivated.
Pressing one of the buttons switches
the display back on again.
Anti-crease
You can also choose whether you want
the display to go out 10 minutes after a
programme has started or to remain
visible throughout the programme.
Anti-crease helps prevent creasing if
laundry is not normally removed im-
mediately after the end of a
programme.
On
The drum will turn at intervals for up to
30 minutes after the programme has
finished. The door can be opened and
laundry removed at any time during the
anti-crease phase.
The standby function is switched on.
When this option is selected, the
display will go out 10 minutes after a
programme has started.
Not in current programme
On
(the machine is delivered with this
option selected)
(the machine is delivered with this
option selected)
Anti-crease is activated.
The standby function is switched off.
The display will remain visible during a
programme.
Off
Anti-crease is deactivated.
To close the Settings menu
Settings
Back A
Continue
OK
^ Press the right hand Menu button
under OK.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Miele washing machines offer perfect
care for your laundry and feature a
wide range of special programmes
designed to suit the fabric being
CareCollection
Miele specialist detergents
"Outdoor wear"
washed. Miele have also developed a
range of specialist CareCollection
detergents and conditioning products
to offer you a complete package for
cleaning and caring for your laundry.
This specialist detergent will clean your
water-repellent outerwear with care.
"Sportswear"
The Miele CareCollection detergents
and conditioning products are listed
below. You can order these and many
other useful products via the internet at:
The Miele Sportswear detergent is
designed to clean sportswear whilst
taking care of the special microfibres
used in these garments. It will help to
neutralise and remove odours whilst
protecting the colour of the fabric and
preventing static build-up.
"Down Items"
This special-purpose detergent
All the products can also be ordered
via the Miele Customer Contact Centre
(see back cover for contact details).
contains a mild tenside and has been
specially formulated to keep down-filled
items supple and to give them bounce.
Miele proofing agent
This special finishing agent reproofs
garments against wind and water and
provides a dirt-repellent finish whilst
retaining elasticity and breathability.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
"UltraWhite" detergent
Liquid detergent "For Delicates"
This multi-purpose powder detergent
has excellent stain removal properties
and is suitable for white and light
coloured laundry as well as heavily
soiled coloured items.
This liquid detergent is ideal for the
gentle treatment of delicate fabrics,
such as wool and silk. Its special
formulation cleans effectively at
temperatures as low as 20°C, while
protecting the colour of your delicate
garments.
"UltraColor" detergent for coloured
garments
Fabric conditioner
This liquid detergent is particularly
suitable for cleaning coloured and dark The Miele fabric conditioner will give
garments. The special formulation
offers effective stain removal, even at
low temperatures, while helping to
prevent colours fading.
your laundry a fresh, natural fragrance.
It makes garments soft to handle and
prevents static build-up during tumble
drying.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/0710/W 2839i WPM
M.-Nr. 07 590 880 / 01
Download from Www.Somanuals.com. All Manuals Search And Download.
|