Olympus Microcassette Recorder 145025 User Manual

DIGITAL VOICE  
RECORDER  
DS-3000  
INSTRUCTIONS  
Please read these instructions for information about using  
the product correctly and safely.  
Keep the instructions handy for future reference.  
To ensure successful recordings, we recommend that  
you test the record function and volume before use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Batteries  
AC Adapter  
Warning  
Warning  
• Batteries should never be exposed to flame,  
heated, short-circuited or disassembled.  
• Do not attempt to recharge alkaline, lithium or  
any other non-rechargeable batteries.  
• Never use any battery with a torn or cracked outer  
cover.  
• Keep batteries out of the reach of children.  
• If you notice anything unusual when using this  
product such as abnormal noise, heat, smoke,  
or a burning odor:  
• Do not attempt to disassemble, repair or modify  
the AC adapter in any way.  
• Keep objects including water, metal, or  
flammable substances from getting inside the  
product.  
• Do not moisten the AC adapter or touch it with a  
wet hand.  
• Do not use the AC adapter in the vicinity of  
flammable gas (including gasoline, benzine and  
lacquer thinner).  
1 remove the batteries immediately while being  
careful not to burn yourself, and;  
2 call your dealer or local Olympus representative  
for servicing.  
In case  
• ...the internal parts of the AC adapter are exposed  
because it has been dropped or otherwise  
damaged:  
• ...the AC adapter is dropped in water, or if water,  
metal flammable substances or other foreign  
objects get inside it:  
• ...you notice anything unusual when using the  
AC adapter such as abnormal noise, heat, smoke,  
or a burning odor:  
1 do not touch any of the exposed parts  
2 immediately disconnect the power supply plug  
from the power outlet, and  
3 call your dealer or local Olympus representative  
for servicing. Continued use of the AC adapter  
under these circumstances could result in electric  
shock, fire or injury.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Recording Format  
SmartMedia  
The DS-3000 stores highly compressed DSS  
(Digital Speech Standard) audio files on  
SmartMedia cards.  
Optional SmartMedia cards are available to add  
capacity as needed, in addition to the included  
16MB SmartMedia card.  
When purchasing SmartMedia cards of  
various memory capacities, specify 3 V (3.3  
V) SmartMedia cards (in memory sizes of 4,  
8, 16, 32, and 64MB) for the Olympus  
CAMEDIA digital camera series.  
Write-protect SmartMedia  
A write-protect seal (supplied with SmartMedia  
card) can be attached to a SmartMedia card to  
guard against accidental recording, erasing, and  
formatting.  
Write-protect  
area  
Notes  
• Commercial 5 V SmartMedia cards cannot be used.  
• This product is compatible with SmartMedia cards  
that have the copyright protection ID feature, and  
with SmartMedia cards without the ID feature. (Audio  
files recorded with this product are not protected by  
copyright law.)  
• Never use SmartMedia cards with products that  
are not compliant with the SSFDC Forum*  
(including certain models of MP3 players).  
* The SSFDC Forum is a voluntary organization  
committed to promoting SmartMedia as a de facto  
standard in the industry. The DS-3000 adheres to  
a format recommended by the SSFDC Forum.  
Attach the write-protect seal to the write-protect  
area to prevent valuable data from being erased  
accidentally.  
Remove the write-protect seal before recording  
or erasing.  
Notes  
• Attach the write-protect seal to the write-protect area  
carefully, without letting the seal stick out, lift, or peel.  
• Do not use commercial seals.  
• Write-protect seals cannot be reused.  
• A dirty write-protect seal may disable the write-protect  
feature. Wipe it with a soft, dry cloth.  
Memory Sizes of SmartMedia Cards  
and Approximate Recording Times*  
• A SmartMedia card with a write-protect seal attached  
to it may not be write-protected when using the card  
with other products.  
Memory Size  
SP Mode  
LP Mode  
4MB  
35 min.  
1 hr.20 min.  
2 hr.45 min.  
5 hr.30 min.  
8MB  
1 hr.15 min.  
2 hr.35 min.  
16MB  
32MB  
64MB  
5 hr.10 min. 11 hr.10 min.  
10 hr.25 min. 22 hr.20 min.  
* Recording time is calculated using a single  
audio file recorded continuously. If audio files  
are recorded intermittently, recording time may  
be shorter than indicated.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Getting Started  
Identification of Parts ................................... 6  
Main Features .............................................. 6  
Preparing For Recording  
Inserting Batteries ........................................ 8  
Replacing Batteries ...................................... 8  
Using the AC Adapter................................... 8  
Inserting and Ejecting  
SmartMedia cards ................................. 9  
Setting Time/Date ....................................... 11  
Basic operations  
Recording ................................................... 12  
Microphone Sensitivity ............................... 14  
Recording Modes ....................................... 14  
Playing ....................................................... 15  
Erasing ....................................................... 17  
Other functions  
Using the Variable Control Voice Actuator  
(VCVA) ................................................. 18  
Index Marks ............................................... 19  
Locking Files .............................................. 19  
System Sounds .......................................... 20  
Alarm Playback Function ........................... 20  
Moving Files Across Folders ...................... 21  
Assigning Folder Names ............................ 22  
Setting Priority Levels ................................ 23  
Setting Job Data ........................................ 24  
Dealer Option Items ................................... 25  
Formatting SmartMedia ............................. 26  
Transferring Data to a PC .......................... 26  
Other Information  
Hold............................................................ 27  
Reset .......................................................... 27  
Menu List ................................................... 27  
Alarm Message List ................................... 28  
Troubleshooting ......................................... 29  
Specifications ............................................. 30  
Accessories (optional)................................ 30  
Technical Assistance and Support ............. 31  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Features  
Identification of Parts  
The DS-3000 digital voice recorder stores  
highly compressed DSS audio files on  
SmartMedia cards.  
The DS-3000 supports two recording modes:  
SP (Standard Playback) mode and LP (Long  
Playback) mode (P.14). The supplied  
16MB SmartMedia card can store  
approximately 2 hours and 35 minutes of  
recordings* in SP mode and approximately  
5 hours and 30 minutes* in LP mode.A64MB  
SmartMedia card (sold separately) can hold  
up to 22 hours and 20 minutes* of recordings.  
The Variable Control Voice Actuator (VCVA)  
saves memory space by pausing recording  
when the recorder judges that there is no  
sound (P.18).  
Recorded audio files can be stored in three  
separate folders for easier identification in  
future use.  
Overwrite recording, insert recording,  
additional recording and partial erasure  
functions make it easy to correct and edit  
recordings.  
Furthermore, the AS-3000 transcription kit  
(sold separately) provides you with a PC-  
footswitch and the software DSS Player Pro  
Transcription Module for easy transcription of  
DSS recordings.  
1 Built-in microphone  
2 NEW button  
3 REC (Record) /SET button  
4 REW (Rewind) /– button  
5 FF (Fast Forward) /+ button  
6 INDEX button  
7 ERASE button  
8 Built-in speaker  
* The recording time available may be shorter  
than specified if a large number of short  
recordings are made. (Use the remaining time  
and recorded time only as references.)  
9 FOLDER/MENU button  
0 STOP button  
! PLAY button  
@ Display (LCD panel)  
# Record/Play indicator lamp  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display (LCD Panel)  
1 Folder  
2 Battery indicator  
3 Recording date/time mark  
4 Remaining memory mark  
5 Total file time mark  
6 Record mode  
7 Alarm mark  
$ VOLUME control  
% Earphone jack  
8 Erase lock mark  
9 Current file  
^ SmartMedia slot  
& Microphone jack  
* SmartMedia ejection switch  
( POWER/LOCK switch  
) MICSENS (Microphone sensitivity)  
switch  
0 Current time, elapsed time, recording  
time, operation guides, menu display, etc.  
! Date, remaining memory, total recording  
time of the playing file, operation guides,  
etc.  
Stopped State  
- VCVA switch  
= HOLD switch  
q Power jack  
Current file number  
Stop position  
w PC (USB) terminal  
e Battery cover  
Total recording time  
of the file  
The display appears as shown below when recording 7  
or playback is stopped.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Replacing Batteries  
Inserting Batteries  
The battery indicator on the display changes  
Slide open the battery cover.  
as the batteries lose power.  
“BATTERY LOW”  
1
When the batteries are too weak, the recorder  
shuts down and “BATTERY LOW” appears on  
the display. When  
appears on the display,  
replace the batteries as soon as possible. AAA  
alkaline batteries are recommended.  
Notes  
Be sure to stop the recorder before replacing the  
batteries. Unloading the batteries while the recorder  
is recording, erasing or otherwise accessing an audio  
file may corrupt the file.  
• Be sure to replace both batteries at the same time.  
Never mix old and new batteries, or batteries of  
different types and/or brands.  
Insert two AAA alkaline batteries,  
observing the correct polarity.  
2
• If it takes longer than 3 minutes to replace dead  
batteries, you may have to reset the time when you  
load fresh batteries.  
• Remove the batteries if you are not going to use the  
recorder for an extended period of time.  
Using the AC Adapter  
Close the battery cover completely.  
3
Plug the optional AC adapter  
(Olympus Model A321 or  
Y
LA  
P
INDEX  
P
O
T
S
SE  
ER  
U
RA  
LD  
FO  
E
EN  
A322) into household power  
outlet and connect the power  
plug to the recorders power  
/M  
connector (DC 3 V) as shown in the illustration.  
Always stop recording before connection.  
Otherwise it may not be possible to play back  
the voice data being recorded.  
• Always stop recording before connection or  
disconnection.  
• When not using the recorder, always disconnect  
the AC adapter from the power outlet.  
• Use only the correct power supply voltage as  
indicated on the adapter.  
• Do not use the AC adapter when connecting the  
recorder to the USB port.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SmartMedia inserted fully into the  
slot  
Inserting and  
Ejecting  
SmartMedia cards  
Inserting SmartMedia cards  
Insert the SmartMedia card into the slot as  
shown below.  
When you set the POWER/LOCK switch to the  
ON position, PLEASE WAITflashes on the  
display.  
SmartMedia not inserted fully into the  
slot  
1
contact area  
SmartMedia  
slot  
Bottom side  
of SmartMedia  
projecting from  
the slot  
PLAY  
STOP  
IN  
D
E
X
When you set the POWER/LOCK switch to the  
ON position, INSERT CARDflashes on the  
display for 2 seconds. Pressing any button with  
no SmartMedia card inserted causes INSERT  
CARDto appear again.  
2
POW  
/LOCK  
ER  
OFF  
ON  
Push the SmartMedia card fully into position.  
Insert the SmartMedia in the  
correct direction.  
Push the SmartMedia card fully into  
Notes  
1
2
If an unformatted SmartMedia card is inserted,  
FORMAT YES?will display automatically. Format  
the SmartMedia card (P.26).  
position.  
Never use any SmartMedia card other than one that  
Set the POWER/LOCK switch to  
ON.  
has been formatted on this unit or on a CAMEDIA 9  
series Olympus digital camera (P.4).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ejecting SmartMedia cards  
Attention  
SmartMedia cards are precision devices. Never  
force the cards when inserting them, or subject  
them to sharp blows.  
Avoid handling and storing SmartMedia cards in  
a hot, damp environment.  
Do not touch the contact area (gold electrodes)  
of the SmartMedia card with bare hands.  
If a SmartMedia card gets dirty, wipe it with a soft,  
dry cloth.  
SmartMedia cards may be vulnerable to  
electrostatic data corruption. When carrying a  
SmartMedia card, put it in its case.  
Remember to back up data from SmartMedia cards  
to a PC or other storage medium from time to time  
(P.26).  
1
POWER  
/LOCK  
O
F
F
O
N
2
Corrupted, lost, or erased data cannot be  
restored.  
Set the POWER/LOCK switch to  
OFF.  
The display disappears.  
1
2
Raise the SmartMedia ejection  
switch.  
Pull the SmartMedia card out with your  
fingers.  
The SmartMedia ejection switch wont work if  
the POWER/LOCK switch is set to ON.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the FOLDER/MENU button  
for 1 second or longer.  
The menu opens (P.27).  
Setting Time/Date  
1
2
3
If you have set the time and date, information  
as to when an audio file is recorded is stored  
automatically with that file. The time and date  
setting is also needed to perform the alarm  
playback function (P.20, 21).  
Press the FF/+ or REW/button to  
choose the time/date setup screen  
(TIME&DATE).  
Press the REC/SET button.  
Time/Date screen appears. The hour  
indicator flashes, indicating the start of the  
time/date setup process.  
Time/Date Screen  
Repeat steps 1 and 2 to set the  
time and date:  
Time and date setup proceeds in the order  
of hour, minute, year, month, and date.  
1Press the FF/+ button or REW/button  
to set a value.  
4
Minute  
Hour  
Year  
Month  
Date  
2Press the REC/SET button to accept  
the value.  
Press the STOP button to end.  
5
REC/SET  
button  
(accepts a choice  
and moves on to  
the next item)  
This completes the time setup procedure.  
Notes  
If you press the STOP button during the setup  
operation, the clock will use the items that were set  
to that point.  
Each press of the NEW button during setting toggles  
the display between the 12-hour and 24-hour system.  
PLAY  
FF/+ or  
REW/–  
button  
(alters a  
choice)  
STOP  
STOP  
button  
IN  
D
E
X
FOLDER  
/MENU  
E
R
A
S
E
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pause Recording  
Recording  
Pause  
Press the REC/SET button while recording.  
The recorder provides three folders, A, B, and  
C, and each message recorded in a folder is  
saved as a Digital Speech Standard (DSS) file.  
Up to 199 messages can be recorded per folder.  
Four recording modes are available: new,  
append, overwrite, and insert.  
“REC PAUSE” will flash on the display.  
Resume Recording  
Press the REC/SET button again.  
Recording will resume at the point of  
interruption.  
New Recording  
Note  
Create a new file to record in.  
The recorder stops when it has been left paused for  
10 minutes or longer.  
Press the FOLDER/MENU button to  
choose a folder.  
The folder name is displayed for 2 seconds.  
1
To instantly review a recording (Quick  
review)  
Press the REW/– button while recording, and  
release it when you want to start playing a file.  
The recorder plays up to the quick review point,  
then stops.  
You can add additional recording in the same  
file from that point.  
Press the NEW button to create a  
new file.  
2
Press the REC/SET button to start  
recording.  
The record/play indicator lamp glows red.  
Aim the microphone at the sound source.  
3
Listening While Audio Is Recorded  
(Recording Monitor)  
Insert the earphone into the earphone jack to  
monitor what is being recorded. (The volume is  
fixed.)  
Press the STOP button to stop  
recording.  
4
Notes  
• If you press the PLAY button during recording,  
recording will stop, and play will start at the beginning  
of the file to which you were recording.  
• If you press the NEW button during recording,  
recording will stop, and “NEW FILE” will appear on  
the display (as in Step 2).  
• A beep will sound when remaining recording time  
reaches 60 seconds, 30 seconds, and 10 seconds  
while recording.  
Append recording  
Perform the procedure of “New Recording”, then  
press the REC/SET button once again to  
append additional recording to the same file.  
Note  
• While recording is in progress, never disconnect or  
connect theAC adapter even if the recorder contains  
batteries. This may result in failure to play the  
recorded file.  
You cannot select any recording mode other than that  
of the original file before append recording (P.14).  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overwrite Recording  
You can overwrite a previously recorded file  
from any point within the file.  
Note that the overwritten recording will be  
erased.  
Inserting Recording into  
Previous Files  
Additional recording can be inserted into  
previously recorded files.  
Choose the file into which you  
Choose the file into which you  
want to insert additional recording.  
(See Steps 1 and 2 in “Playing” (P.15).)  
1
want to overwrite.  
(See Steps 1 and 2 in “Playing” (P.15).)  
1
Press the PLAY button to play the  
Press the PLAY button to play the  
file.  
2
file.  
2
While playing a file, press the  
FOLDER/MENU button if you want  
to insert additional recording.  
“INSERT REC?” appears on the display.  
Press the STOP button where you  
want to start overwriting.  
3
3
Press the REC/SET button to start  
overwriting.  
Press the REC/SET button to start  
4
inserting additional recording.  
4
Press the STOP button to stop  
overwriting.  
Press the STOP button to stop  
inserting additional recording.  
5
5
Notes  
Pause Insert Recording  
• When you are overwriting and reach the end of the  
file, the recorder begins to append the additional  
recording.  
Pause  
Press the REC/SET button.  
“INSERT PAUSE” flashes on the display.  
 
• Append recording does not erase the next previously  
recorded file.  
• Locked files cannot be overwritten (P.19).  
• A SmartMedia card with a write-protect seal attached  
to it cannot be overwritten.  
Resume Insert Recording  
Press the REC/SET button again.  
• You cannot select any recording mode other than  
that of the original file before overwrite recording  
(P.14).  
Insert recording resumes.  
➥➥  
Notes  
• The recording time and date of the file into which  
recording has been inserted is updated to the time  
and date of when the inserted recording was  
recorded.  
• You cannot select any recording mode other than  
that of the original file before insert recording  
(P.14).  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Microphone  
Sensitivity  
Recording Modes  
You can choose between two recording modes:  
SP (Standard Playback) mode and LP (Long  
Playback) mode. Choose one of the modes  
before you perform recording. Once you choose  
a mode, files are recorded in the selected mode  
as long as you do not change the mode.  
Microphone sensitivity is adjustable to meet  
recording needs.  
Using the MICSENS switch, choose between  
the CONF and DICT positions.  
Press the FOLDER/MENU button  
for 1 second or longer.  
The menu opens (P.27).  
CONF : High-sensitivity mode that records  
sounds in all directions.  
DICT : Low-sensitivity mode suited for  
dictation.  
1
Press the FF/+ or REW/– button to  
open the Recording Mode Setup  
screen (REC MODE).  
2
Notes  
• An optional ME7 conference microphone is  
recommended for recording conferences in CONF  
mode if people speaking are located far away from  
the recorder.  
• Choose DICT mode if you want to use voice-  
recognition software, such as ViaVoice from IBM.  
Press the REC/SET button.  
The recording mode setup process begins.  
3
Press the FF/+ or REW/– button to  
choose between SP and LP.  
4
Press the REC/SET button.  
The recording mode setup process ends.  
5
Press the STOP button to close the  
menu.  
6
Notes  
• Choose SP mode for recording meetings or lectures  
with crisp clarity.  
• Choose SP mode if you want to use voice-recognition  
software, such as ViaVoice from IBM.  
You cannot select any recording mode other than  
that of the original file before append, overwrite, or  
insert recording.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Playing  
The recorder stops when it has been left paused for  
10 minutes or longer.  
You can start playing a file at any point. The  
recorder stops automatically when it finishes  
playing each file.  
Playback Functions  
Press the FOLDER/MENU button to  
choose a folder.  
To fast-forward  
1
Press the FF/+ button once while stopped.  
The recorder stops when it reaches the end  
of the file.  
Press the FF/+ or REW/– button  
several times to choose the file  
that you want to play.  
The time and date when the file was  
2
Note  
If the FF/+ button is pressed at the end of a file, the  
recorder stops at the beginning of the next file, and  
the recording date/time of the file flash for 2 seconds.  
And if the FF/+ button is pressed while the recording  
date/time are flashing, the recorder skips to the  
beginning of the next file.  
recorded are displayed.  
Press the PLAY button to start  
playback.  
The record/play indicator lamp glows  
green.  
3
To skip  
Adjust the VOLUME control to your  
Press the FF/+ button once while fast-  
forwarding.  
or  
liking.  
4
Canceling Playback  
Press the FF/+ button twice while stopped.  
The recorder skips to and stops at the end  
of the file.  
Stop  
Press the STOP button.  
The playback stops at the point where the  
STOP button was pressed.  
• Press the PLAY button to resume the  
To skip continuously  
Continue pressing the FF/+ button while fast-  
forwarding.  
playback.  
To rewind  
Pause  
Press the REW/– button once while stopped.  
Press the PLAY button.  
The recorder stops when it reaches the  
beginning of the file.  
“PLAY PAUSE” flashes on the display.  
Resume Playback  
Note  
Press the PLAY button again.  
If the REW/– button is pressed at the beginning of a  
Playback will resume at the point of  
file, the recorder starts rewinding from the end of 15  
interruption.  
previous file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To skip backward  
Cue (Fast Forward While Playing)  
Press the REW/– button once while rewinding.  
or  
Hold the FF/+ button pressed while the recorder  
is stopped or playing a file.  
Press the REW/– button twice while stopped.  
The recorder stops when it reaches the end  
of the file.  
The recorder skips to, and stops at, the  
beginning of the file, and the recording  
date/time flash for 2 seconds.  
Note  
If an index mark is encountered in the middle  
of the file, the recorder stops at that point, the  
index number flashes momentarily, and then  
cueing proceeds when the FF/+ button is still  
pressed.  
Note  
If the REW/– button is pressed while the recording  
are date/time flashing, the recorder skips to the  
beginning of the previous file.  
Canceling a Cue  
To continuously skip backward  
Release the FF/+ button where you want the  
file played.  
Continue pressing the REW/– button while  
rewinding.  
Playback begins.  
Fast Playback  
Review (Fast Rewind While Playing)  
Hold the PLAY button for 1 second or longer  
while playing a file.  
Hold the REW/– button pressed while the  
recorder is stopped or playing a file.  
The recorder plays back at approximately  
The recorder starts playback automatically  
when it reaches the beginning of the file.  
50% faster than normal rate.  
• After fast playback is canceled, playback  
returns to normal rate.  
Note  
If an index mark is encountered in the middle  
of the file, the recorder stops at that point, but  
will proceed with the review if the  
REW/– button is pressed.  
Canceling Fast Playback  
Hold the PLAY button for 1 second or longer  
again*.  
Playback returns to normal rate.  
* Press the PLAY button momentarily (for less  
than 1 second) to pause with fast playback  
enabled.  
Canceling the Review  
Release the REW/– button where you want the  
file played.  
Playback begins.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Erase All Files from a Folder  
All files in a folder can be erased simultaneously,  
Erasing  
except for locked files (P.19).  
Erasing One File at a Time  
A selected file can be erased from a folder.  
Press the FOLDER/MENU button to  
Press the FOLDER/MENU button to  
choose the folder in which you  
want to erase all files.  
1
choose a folder.  
1
Press the ERASE button for 3  
Press the FF/+ or REW/– button  
several times to choose the file you  
want to erase.  
seconds or longer.  
“ALL ERASE?” flashes on the display for 8  
seconds.  
2
2
Press the ERASE button again.  
Press the ERASE button.  
The display lights continuously to indicate  
erasing has started.  
“FILE ERASE?” flashes on the display for  
8 seconds.  
3
3
4
“ERASE DONE” is displayed when the files are  
erased. Locked files are reassigned file  
numbers in ascending order.  
Press the ERASE button again.  
The display lights continuously to indicate  
erasing has started.  
“ERASE DONE” is displayed when the file is  
erased. File numbers are incremented  
automatically.  
Notes  
• It might take more than ten seconds to complete  
erasing tracks. Do not eject the SmartMedia card  
before erasing is finished.  
• Files stored on a SmartMedia card with a write-  
protect seal attached to it cannot be erased (P.4).  
Notes  
• An erased file cannot be restored.  
• Locked files cannot be erased (P.19).  
• Files stored on a SmartMedia card with a write-  
protect seal attached to it cannot be erased (P.4).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Partially Erase a File  
You can erase a selected part of a file.  
Choose the file from which you  
Using the Variable  
Control Voice  
Actuator (VCVA)  
want to erase a part.  
(See Steps 1 and 2 in “Playing” (P.15).)  
1
When the microphone senses that sounds have  
reached a preset volume, the built-in Variable  
Control VoiceActuator (VCVA) starts recording  
automatically, and stops when the volume  
drops.  
Particularly helpful for extended recording, the  
VCVA not only conserves memory by turning  
off recording during silent periods, but also  
makes playback more efficient and convenient.  
Press the PLAY button to play the  
file.  
2
Press the PLAY button once again  
where you want to start erasing.  
The recorder pauses.  
3
Press the ERASE button.  
The recorder starts playback  
4
automatically, and the display shows the  
total recording time of the file being played  
and “ERASE” alternately.  
Start recording with the VCVA  
switch set to ON.  
1
When the volume falls to a preset level or  
lower, recording automatically pauses, and  
“STANDBY VCVA” flashes on the display.  
The record/play lamp glows when  
recording starts and flashes when  
recording pauses.  
Press the ERASE button once  
again where you want to stop  
erasing.  
The erase starting point (time) set in step  
3 and the ending point (time) set in this  
step appear on the display for 8 seconds  
alternately.  
5
Using the VOLUME control, adjust  
the start/stop actuation level.  
2
The higher the VOLUME control is set, the  
more sensitive the start/stop level  
becomes, allowing recording to  
Press the ERASE button once  
again.  
6
When “ERASE DONE” appears after  
“PARTIAL ERASE! ”, partial erasing is  
completed.  
automatically begin at a quieter level.  
Notes  
Notes  
• The start/stop actuation level also varies depending  
on the selected microphone sensitivity mode (→  
P.14).  
To ensure successful recordings, prior testing and  
adjustment of the start/stop actuation level is  
recommended.  
• When the recorder finishes playback of the current  
track before you press the ERASE button, the erase  
starting point (time) and ending point (time) alternate  
on the display for 8 seconds, similar to Step 5.  
• Locked files cannot be erased.  
18 • A SmartMedia memory card with a write-protect seal  
Download from Www.Somanuals.com. All Manuals Search And Download.  
attached to it cannot be erased.  
Index Marks  
Locking Files  
Index marks can be incorporated into a file  
during recording or playback to make it easy to  
locate interesting information. Index marks  
enable faster access to important information  
by pressing the FF/+ or REW/– button.  
Locking a file keeps important data from being  
accidentally erased.  
Locked files are not erased when you choose  
to erase all files from a folder (P.17).  
Choose the file you want to lock.  
(See Steps 1 and 2 in “Playing” (P.15).)  
Setting an Index Mark  
1
Press the FOLDER/MENU button  
for 1 second or longer.  
The menu opens (P.27).  
Press the INDEX button during  
recording or playback to set an index  
mark.  
An index mark is set and the index number  
appears on the display.  
2
Press the FF/+ or REW/– button to  
open the locking screen (LOCK).  
3
Clearing an Index Mark  
Press the REC/SET button.  
The file locking setup process begins.  
Play the file with the index mark  
4
you want to clear.  
1
Press the FF/+ or REW/– button to  
choose between ON and OFF.  
ON :Locks the file and prevents it from  
being erased.  
OFF :Unlocks the file and allows it to be  
erased.  
Hold the FF/+ or REW/– button to  
choose the index mark to be  
cleared.  
5
2
Press the ERASE button while the  
index number appears for about 2  
seconds on the display.  
The index mark is erased.  
3
Press the REC/SET button to  
complete the setup process.  
6
Press the STOP button to close the  
menu.  
Index numbers are reassigned automatically.  
7
Notes  
Notes  
• Up to 16 index marks can be set in a file. Attempting  
to set more index marks will cause “INDEX FULL”  
to appear on the display.  
• You cannot append, overwrite, or insert recordings  
into locked files.  
• You cannot set index marks in locked files.  
• Files stored on a SmartMedia card with a write-  
protect seal attached to it cannot be locked.  
• Locked files are erased when a SmartMedia card is  
formatted.  
• Index marks cannot be set or cleared in a file stored  
on a SmartMedia card with a write-protect seal  
attached to it.  
• Index marks cannot be set or cleared in a locked  
file.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Sounds  
Alarm Playback  
Function  
The recorder beeps to alert you to button  
operations or warn you of errors. System  
sounds may be turned off.  
The alarm playback function can be set to play  
a selected file by pressing any button when the  
alarm tone sounds.  
Press the FOLDER/MENU button  
for 1 second or longer.  
The menu opens (P.27).  
1
Choose the file to be played when  
the alarm sounds.  
(See Steps 1 and 2 in “Playing” (P.15).)  
1
Press the FF/+ or REW/– button to  
open the system sound setup  
screen (BEEP).  
2
Press the FOLDER/MENU button  
for 1 second or longer.  
The menu opens (P.27).  
2
Press the REC/SET button.  
The system sound setup process begins.  
3
Press the FF/+ or REW/– button  
to open the alarm playback setup  
screen (ALARM).  
Press the FF/+ or REW/– button to  
choose between ON and OFF.  
3
4
Press the REC/SET button.  
The alarm playback setup process begins.  
Press the REC/SET button to  
complete the setup process.  
4
5
Press the FF/+ or REW/– button to  
choose between ON and OFF.  
ON: Enables alarm playback.  
OFF: Disables alarm playback.  
Press the STOP button to close the  
menu.  
5
6
Note  
If the alarm playback function has been set, the alarm  
will sound at the scheduled time even if system sounds  
are turned off.  
Press the REC/SET button to  
complete the setup process.  
When you choose ON, the alarm mark  
lights and the scheduled time setup  
process begins. The time indicator will  
flash. Step 7  
6
When you choose OFF, the alarm  
playback setup process ends, and the  
alarm mark disappears. Step 11  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the FF/+ or REW/– button  
to set the hour.  
Moving Files Across  
Folders  
7
8
Press the REC/SET button to  
accept the hour.  
The minute indicator flashes.  
A recorded file can be transferred from one  
folder to another. The file is added at the end of  
existing files in the destination folder.  
Press the FF/+ or REW/– button  
to set the minute.  
9
10  
11  
Choose the file you want to move.  
Press the REC/SET button to  
accept the minute.  
(See Steps 1 and 2 in “Playing” (P.15).)  
1
Press the PLAY button to play the  
file.  
Press the STOP button to close  
the menu.  
2
Press the FOLDER/MENU button  
while playing the file.  
“INSERT REC?” appears on the display.  
An alarm tone will sound at the scheduled time.  
Press any button while the alarm sounds to play  
the file you associated with the alarm.  
3
Press the FOLDER/MENU button  
once again to select “FILE MOVE?.”  
Notes  
4
• The alarm playback function can be set for only one  
file at a time.  
Press the REC/SET button.  
The destination folders blink on the  
display.  
• The alarm will sound at the scheduled time every  
day unless the alarm playback setting is cleared.  
• The alarm will sound for 5 minutes and then stop.  
• If you are using the recorder at the scheduled time,  
the alarm will sound after you’re done.  
• The alarm will sound at the scheduled time even if  
you are holding the recorder. The recorder begins  
to play the file associated with the alarm when you  
press any button.  
• The alarm playback setting is cleared if the selected  
file is erased or the SmartMedia card is ejected.  
• The alarm won’t launch at the scheduled time if the  
POWER/LOCK switch is set to OFF.  
5
Press the FF/+ or REW/– button to  
choose a destination folder.  
6
Press the REC/SET button to accept  
the chosen destination folder.  
The file is moved.  
7
Notes  
• If the destination folder is full (a maximum of 199  
files), “FOLDER FULL” appears on the display and  
files cannot be transferred to it.  
• The file transfer process is aborted if you press the  
STOP button or leave the recorder idle for 8 seconds  
after you choose a destination folder.  
• Files cannot be transferred from one folder to another  
on a SmartMedia card with a write-protect seal 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
attached to it.  
INDEX button: Lets you insert one space.  
Assigning Folder  
Names  
When you have finished setting the  
folder name, press the REC/SET  
button for 1 second or longer.  
This completes the folder naming  
procedure.  
7
8
The three folders can each be assigned a name  
of up to eight characters.  
The recorder comes with the following preset  
folder names: FOLDER A, FOLDER B,  
FOLDER C.  
Press the STOP button to close the  
menu.  
Press the FOLDER/MENU button  
Notes  
for 1 second or longer.  
The menu opens (P.27).  
• The folder naming process ends automatically when  
the eighth character is set.  
• Folder names can be changed only if a SmartMedia  
card is inserted.  
1
Press the FF/+ or REW/– button to  
open the folder name setup screen  
(FOLDER NAME).  
• A SmartMedia card with a write-protect seal attached  
to it cannot be changed.  
• When a SmartMedia card is formatted, folder names  
that you assigned will be reset to the initial names.  
2
Press the REC/SET button.  
The folder name setup process begins.  
3
Press the FF/+ or REW/– button to  
choose the folder you want to  
name.  
4
Press the REC/SET button to  
accept the chosen folder.  
The first character of the chosen folder’s  
name flashes.  
5
Press the FF/+ or REW/– button to  
choose characters.  
Available characters are 0 to 9, A to Z, and  
space.  
6
REC button:  
To input the selected  
character and advance the  
input position.  
NEW button: Acts as a backspace.  
ERASE button: To delete the flashing  
character.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Set a Priority for a New File  
Setting Priority  
Levels  
Press the NEW button.  
A new file is created.  
1
You can set a priority level for each file.  
You can choose between “HIGH” and  
“NORMAL.” The default is NORMAL.  
Press the INDEX button for longer  
than 1 second.  
“PRIORITY NORMAL” is displayed.  
2
Press the INDEX button to choose  
To Set a Priority Level for an  
Existing File  
between “HIGH” and “NORMAL.”  
3
Press the REC/SET button to  
accept the choice.  
4
Choose the file to set a priority  
The recorder displays the new file once the  
priority is set.  
level.  
1
(See Steps 1 and 2 in “Playing” (P.15).)  
Press the INDEX button for longer  
Note  
than 1 second.  
“PRIORITY NORMAL” is displayed.  
You may not be able to change the priority level for  
files recorded on another DS-3000.  
2
Press the INDEX button to choose  
between “HIGH” and “NORMAL.”  
3
Press the REC/SET button to  
accept the choice.  
4
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the FF/+ or REW/– button to  
choose characters.  
Available characters are 0 to 9, A to Z, and  
Setting Job Data  
5
You may record the name of the person who  
made the recording (Author ID) and code name  
for classification (Work Type) for each file  
automatically when recording is done.  
Using the supplied DSS Player, importing a Job  
Data list (a list of these Author IDs and Work  
Types made on a PC) to the recorder saves you  
the bother of entering the IDs or Types.  
TheAuthor ID and Work Type are set as “AAAA”  
at the factory.  
space.  
REC button:  
To input the selected  
character and advance the  
input position.  
NEW button: Acts as a backspace.  
ERASE button: To delete the flashing  
character.  
INDEX button: Lets you insert one space.  
After selecting or entering the  
Author ID, press and hold the REC/  
SET button for more than 1  
second* to make it the current  
Author ID.  
6
7
Setting an Author ID  
Press and hold the FOLDER/MENU  
* If you selected an Anthor ID from the list  
in step 3, press the REC/SET button.  
button for more than 1 second to  
open the menu (P. 27).  
“AUTHOR ID” appears on the display.  
1
Press the STOP button to close the  
menu.  
Press the REC/SET button.  
The Author ID currently assigned to the  
recorder appears on the display.  
2
Notes  
• An Author name must be of more than 4 and fewer  
than 17 characters.  
• You must not use a space within the first four  
characters of an Author name.  
You cannot change the Author ID of a file which you  
have already recorded.  
Press the FF/+ or REW/– button to  
select the Author ID that you want  
to assign to the recorder from the  
ID list*.  
3
If you select an ID from the list, go to step  
6.  
* If no ID list is imported from a PC, the  
current MANUAL AUTHOR ID appears  
on the display. In such a case, proceed  
to step 4.  
Press the REC/SET button.  
The current MANUAL AUTHOR ID  
appears on the display with the first  
character flashing.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
24  
INDEX button: Lets you insert one space.  
Setting a Work Type  
After selecting or entering the Work  
Type, press and hold the REC/SET  
button for more than 1 second* to  
make it the current Work Type.  
* If you selected a Work Type from the list  
in step 4, press the REC/SET button.  
Press and hold the FOLDER/MENU  
button for more than 1 second to  
open the menu (P. 27).  
7
8
1
Press the FF/+ or REW/– button  
until “WORK TYPE” appears on the  
display.  
2
Press the STOP button to close the  
menu.  
Press the REC/SET button.  
The Work Type currently assigned to the  
recorder appears on the display.  
3
4
Notes  
• The Work Type must be of fewer than 17 characters.  
You can use a space anywhere in a filename.  
• You cannot change the Work Type of a file which  
you have already recorded.  
Press the FF/+ or REW/– button to  
select the Work Type that you want  
to assign to the recorder from the  
TYPE list*.  
If you select a TYPE from the list, go to  
Dealer Option Items  
step 7.  
* If no TYPE list is imported from a PC, the  
current MANUAL WORK TYPE appears  
on the display. In such a case, proceed  
to step 5.  
Some additional options can be set by your  
Professional Olympus dictation dealer. For  
details on the functions and operation of this  
optional accessory, consult the dealer from  
whom you purchased the recorder.  
Press the REC/SET button.  
The current MANUAL WORK TYPE  
5
appears on the display with the first  
character flashing.  
Press the FF/+ or REW/– button to  
choose characters.  
Available characters are 0 to 9, A to Z, and  
space.  
6
REC button:  
To input the selected  
character and advance the  
input position.  
NEW button: Acts as a backspace.  
ERASE button: To delete the flashing  
character.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Formatting  
SmartMedia  
Transferring Data to a PC  
This recorder is equipped with a USB terminal  
to enable recorded voice data to be transferred  
to a PC. For more details on how to transfer  
data and voice recognition software, refer to the  
supplied DSS Player Pro manual.  
Formatting prepares SmartMedia cards for  
recording. SmartMedia cards that have been  
used on non-Olympus devices, or that can’t be  
accessed by this unit, require formatting. The  
SmartMedia card that comes with this unit and  
Olympus SmartMedia cards are preformatted  
and can be used immediately following  
purchase.  
PC  
USB cable  
To PC’s  
USB terminal  
USB connector  
Press the FOLDER/MENU button  
Stop the recorder before plugging in the USB  
cable. Do not use the AC adapter when  
connecting the recorder to the USB port. The  
USB port delivers the required power to the  
recorder.  
for 1 second or longer.  
The menu opens (P.27).  
1
Press the FF/+ or REW/– button to  
open the FORMAT screen  
(FORMAT YES/NO).  
2
Tip  
Press the REC/SET button.  
The formatting process is selected.  
When the SmartMedia card is ejected, data can be  
transferred from the SmartMedia card to a PC via a  
number of ways. See Page 30 for optional accessories  
to download SmartMedia through your PCMCIA, USB,  
or Floppy Disk drives.  
3
Press the FF/+ or REW/– button to  
choose “YES?”.  
4
Press the REC/SET button again.  
Formatting begins and an indicator flashes  
on the display.  
5
“FORMAT DONE” displays when formatting  
ends.  
Notes  
• When a SmartMedia card is formatted, all the stored  
data, including locked files, is erased.  
• A SmartMedia card with a write-protect seal attached  
to it cannot be formatted.  
• After formatting a SmartMedia card, the display will  
show “NEW FILE”.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hold  
Menu List  
Press the  
All operation buttons are disabled. This feature  
is useful when the recorder has to be carried in  
a bag or pocket.  
FOLDER/MENU button  
for 1 second or longer  
Setting the HOLD switch to the HOLD  
position.  
AUTHOR ID  
WORK TYPE  
REC MODE  
LOCK  
When the recorder is in hold mode, the time  
shows on the display.  
Remember to reset the HOLD switch when  
using the recorder. Setting the HOLD switch to  
the HOLD position locks the recorder.All buttons  
are disabled.  
ALARM  
Reset  
BEEP  
TIME & DATE  
FOLDER NAME  
FORMAT  
If the display or the recorder acts strangely,  
lightly press the reset button in the battery  
compartment with the tip of a ballpoint pen or a  
similar object.  
: Press the FF /+ or  
REW/button  
Notes  
If you press the STOP button, the REC/SET button,  
or the FOLDER/MENU button during a menu setup  
operation, the recorder will stop and apply the items  
that were set to that point.  
Notes  
• Do not use a sharp object such as a needle.  
• The time/date setup process launches automatically  
when you press the reset button. Set the time and  
date again (P.11).  
The recorder will stop if you leave it idle for 3 minutes  
during a menu setup operation, when a selected item 27  
• Audio data is not erased when the recorder is reset.  
is not applied.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm Message List  
Message  
Meaning  
Explanation  
Action  
Low battery  
power  
Battery power is getting low.  
Replace with new batteries  
BATTERY LOW  
(P.8).  
Write-protected  
Tried to record to, or erase from, a Remove the write-protect seal  
SmartMedia card with a write-  
protect seal attached.  
from the SmartMedia card and  
CARD LOCK  
try again (P.4).  
Incompatible  
SmartMedia  
SmartMedia  
ejection error  
Folder full  
An incompatible SmartMedia card Insert a compatible SmartMedia  
CARD ERROR  
EJECT ERROR  
was inserted. card (P.9).  
The SmartMedia card was ejected Reinsert the SmartMedia card.  
during an operation.  
The folder is full of files (maximum Erase files that are no longer  
FOLDER FULL  
of 199 files).  
required, or insert another  
SmartMedia card.  
Formatting error  
Index full  
An error was encountered while  
formatting.  
Reinsert the SmartMedia card  
and then reformat it (P.26).  
Erase index marks that are no  
longer required (P.19).  
Insert a SmartMedia card  
(P.9).  
FORMAT ERROR  
INDEX FULL  
The file is full of index marks  
(maximum of 16 marks).  
There is no SmartMedia card  
inserted.  
No card  
INSERT CARD  
Erase-locked  
Attempted to overwrite, insert  
additional recording to, or erase a  
locked file.  
Unlock the file (P.19).  
LOCK ON  
Zero remaining  
memory  
The SmartMedia card has no  
remaining memory.  
Erase files that are no longer  
required or insert another  
SmartMedia card.  
MEMORY FULL  
NO FILE  
No file  
No files were found in the folder.  
Select another folder.  
Priority cannot be You tried to set a priority level for  
In such a case, you cannot set a  
priority for the file.  
PRIORITY ERROR set for the file.  
a file recorded on another  
recorder.  
Unrecordable  
READONLY  
There is something wrong with the Back up the data (P.26) and  
SmartMedia card.  
format the SmartMedia card.  
File cannot be  
A file with the same file name*  
already exists in the destination  
folder.  
Transfer the file to another folder.  
SAME FILE  
TRAIN PC  
transferred  
PC microphone  
indicator  
The recorder is being used as a  
PC microphone**.  
Refer to the supplied DSS Player  
Pro manual.  
* File names are assigned during recording for file management purposes.  
**The recorder enters this state when you hold the NEW button.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptom  
Probable cause  
Action  
Nothing  
appears on  
the display.  
The batteries are not loaded properly.  
The batteries are dead.  
The POWER/LOCK switch is set to OFF.  
Verify polarity is correct.  
Replace with new batteries.  
Set the POWER/LOCK switch to  
ON.  
If none of these suggestions works  
The recorder is in HOLD mode.  
Reset the recorder (P.27).  
Release the recorder from HOLD  
(P.27).  
Won’t start  
The SmartMedia card is not formatted.  
Format the SmartMedia card  
(P.26).  
Replace with new batteries.  
Remove the seal.  
The batteries are dead.  
The SmartMedia card has a write-protect seal  
attached to it.  
Unable to  
record  
The SmartMedia card is unformatted.  
Format the SmartMedia card.  
The SmartMedia card does not have enough memory. Erase unnecessary files or insert  
another SmartMedia card.  
The maximum number of files has been reached.  
The earphone is connected.  
The VOLUME control is set to 0.  
The file is locked.  
The SmartMedia card has a write-protect seal  
attached to it.  
Check another folder.  
No playback  
tone heard  
Unable to  
erase  
Disconnect the earphone jack.  
Adjust the VOLUME control.  
Unlock the file (P.19).  
Remove the seal.  
Noise heard  
during  
playback  
Recording  
level too low  
The recorder was shaken during recording.  
The recorder was placed near a cell phone or  
fluorescent lamp while recording or during playback.  
The microphone sensitivity is too low.  
Move the recorder.  
Set the microphone sensitivity to  
CONF mode and try again.  
Erase unnecessary index marks  
(P.19).  
Unable to set The maximum number of index marks (16) has been  
index marks  
reached.  
The SmartMedia card has a write-protect seal  
attached to it.  
Remove the seal.  
The file is locked.  
A non-standard AC adapter is being used.  
Unlock the file (P.19).  
Use the Olympus A321 (for US  
and Canada) or A322 (for Europe  
except U.K) AC adapter  
(Oprional).  
Won’t work  
with AC  
adapter  
Unable to  
eject the  
SmartMedia  
card  
The POWER/LOCK switch is set to ON.  
Set the POWER/LOCK switch to  
OFF.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Accessories (optional)  
Recording format  
SmartMedia cards of 4, 8, 16, 32, and 64MB:M-4/8/  
16/32/64  
Olympus CAMEDIA digital camera series 3 V (3.3 V)  
SmartMedia memory cards can be used.  
DSS (Digital Speech Standard)  
Recording media  
3 V (3.3 V) SmartMedia cards  
(4 to 64MB)  
Card format  
Input level  
Sampling frequency  
SP mode:12 kHz  
LP mode: 8 kHz  
Overall frequency response  
SSFDC Forum-compliant  
SmartMedia format  
–70 dBv  
PC card adapter:MA-2E  
Allows files to be transferred to a PC that has a PC  
card slot or PC card drive.  
FlashPath (floppy disk adapter):MAFP-2E  
Allows files to be transferred to a PC with a 3.5” floppy  
disk drive.  
SP mode:300 to 5,000 Hz  
LP mode: 300 to 3,000 Hz  
Recording time SP mode:2 hours 35 minutes  
(16MB card)  
USB SmartMedia reader/writer:MAUSB-1 (US and  
Canada) or MAUSB-2 (Europe)  
Allows data to be transferred to and from a PC.  
LP mode: 5 hours 30 minutes  
(16MB card)  
Built-in ø28 mm round dynamic  
speaker  
Conference microphone:ME7  
A highly sensitive directional microphone (shotgun  
microphone). Used to record speakers at a distance.  
Speaker  
Microphone jack ø3.5 mm mini-jack, impedance  
2 kΩ  
Earphone jack ø3.5 mm mini-jack, impedance  
8 Ω  
Maximum working output (3 V DC)  
100 mW or more (8 speaker)  
Input power requirement  
Rated voltage:3 V  
External microphone:ME10*  
A lavalier omnidirectional microphone that clips to  
clothing. Used to record your own voice or people near  
you.  
Noise-Cancellation microphone:ME12  
Used to get crisp recordings of your own voice by  
reducing the effects of ambient noise. Recommended  
to improve the accuracy when using voice-recognition  
software.  
Batteries:  
TwoAAA  
batteries  
(LR03 or R03)  
External power supply:  
AC adapter  
Battery life (Recording or Playing)  
Approx. 11 hours (with alkaline  
AC adapter:A321 (US and Canada) orA322 (Europe  
except U.K.)  
batteries, based on our standard  
testing procedure)  
Connecting cord:KA232*  
External dimensions  
Use to connect the microphone jack of this unit to a  
radio or other sound source.  
109.5 x 50.0 x 16.7 mm (without  
protrusions)  
Weight  
86 g (including batteries)  
Plug adapter:PA3  
An adapter that connects devices such as  
microphones with ø2.5 mm mini-plugs to the unit’s ø3.5  
mm mini-jack.  
* Specifications and design are subject to change  
without notice.  
30 * Battery life varies greatly according to type of  
batteries used and the conditions of use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC Transcription kit: AS-3000  
Technical Assistance  
and Support  
The AS-3000 transcription kit (sold separately)  
provides you with a PC-footswitch, a headset and the  
software DSS Player Pro Transcription Module for easy  
transcription of DSS recordings.  
DS-3000 is part of the Olympus Professional  
Dictation System. Your dealer is trained to  
troubleshoot and fix many common problems  
that you may be having with this system. If you  
encounter problems with use of DS-3000, we  
recommend that you contact your Olympus  
Professional Dealer that sold you the system.  
If your dealer cannot fix your problem, please  
call our technical hotline number or send E-mail.  
*Use these accessories with the PA3 plug adapter.  
Technical Hotline Number in the U.S. and  
Canada  
1-888-553-4448  
User Support E-mail address in the U.S. and  
Canada  
Technical Hotline Number in Europe  
Toll free number  
00800 67 10 83 00  
available for Austria, Belgium, Denmark,  
France, Germany, Netherlands, Norway,  
Sweden, Switzerland, United Kingdom  
Charged numbers  
+49 180 567 1083  
available for Finland, Italy, Luxemburg,  
Portugal, Spain and Czech Republic  
+49 40 23773 899  
available for Greece, Croatia, Hungary and  
the rest of Europe  
User Support E-mail address in Europe  
The following are for only technical questions  
and support about IBM ViaVoice.  
support/faqolympus.html  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211  
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 1-800-622-6372  
(Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. 040-237730  
(Letters) Postfach 10 49 08. 20034 Hamburg. Germany.  
2-8 Honduras Street, London EC1Y 0TX, United Kingdom, Tel. 020-7253-2772  
Declaration of Conformity  
Model Number:  
Trade Name:  
Responsible Party:  
Address:  
DS-3000  
DIGITAL VOICE RECORDER  
OLYMPUS AMERICA INC.  
2 Corporate Center Drive, Melville, NY 11747-3157, U.S.A.  
800-622-6372  
Telephone Number:  
This device Complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Tested To Comply  
With FCC Standards  
FOR HOME OR OFFICE USE  
Canadian RFI  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio  
Interference Regulations of the Canadian Department of Communications.  
Cet apparail numerique ne depasse pas limits de Categorie B pour les emissions de gruit radio emanant d’appareils numeriques,  
tel que prevu dans les Reglements sur l’Interference Radio du Department Canadian des Communications.  
“CE” mark indicates that this product complies with the European requirements for safety, health, enviroment and customer  
protection.  
L’indication “CE” signfie que ce produit est conforme aux exigences concemant la sécurité, la santé, l’environnement et la  
protection du consommateur.  
Das „CE“ Zeichen bestätigt die übereinstimmug mit den Europäischen Bestimmungen für Betriebssicherheit und  
Umweltschutz.  
E2-2741-03  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Dishwasher G643SCVI User Manual
Miele Range 09 898 161 User Manual
Milwaukee Impact Driver 58 01 1830 User Manual
Multiquip Automobile Parts Qp4tZt10p User Manual
Mustang Survival Life Jacket MD3075 User Manual
NAD DVD Player L55 User Manual
Napoleon Fireplaces Outdoor Fireplace N415 0232 User Manual
Nokia Network Card 12 GSM MODULE REMOTE I O User Manual
Omega Stud Sensor CNiS16 User Manual
Panasonic Telephone KX G2200A User Manual