Installation Instructions
30" Electric, 30" Induction Range
30", 36" All Gas Range
30", 36", 48" Dual Fuel Range
To prevent accidents and damage to the range, you must read all
instructions supplied before installing or using the appliance.
en–US, CA
M.-Nr. 09 898 161
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
ɘ WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage, personal injury, or death.
– Do not use or store gasoline or other combustible liquids or vapors in the
vicinity of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
– Do not try to light any appliance.
– Do not touch any electric switches.
– Do not use any phones inside your building.
– Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
– If you are unable to reach your gas provider, call the fire department.
– Installation and service must be performed by a qualified installer, qualified
service agency or your gas provider.
(In Massachusetts, installation must be performed by a licensed installer / gas
fitter.)
– Note to the installer:
Please give these installation instructions to the consumer for the local
electrical/gas inspector.
®
®
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT SAFETY INSTRUCTIONS................................................................. 2
IMPORTANT SAFETY INSTRUCTIONS................................................................. 6
Notes on installation............................................................................................ 13
Model numbers ..................................................................................................... 13
Data plate .............................................................................................................. 13
Distance to the range hood.................................................................................... 13
Items included with this range ............................................................................... 13
Toe-kick and drop guard................................................................................... 14
Installation of the toe-kick................................................................................. 14
Installation of the drop guard............................................................................ 14
Assembling the grill........................................................................................... 15
Optional accessories ............................................................................................. 16
RBGAG All Gas Backguard/RBGDF Dual Fuel Backguard............................... 16
RBS Backsplash ............................................................................................... 19
XKM 3000 W Remote Vision............................................................................. 19
Required connections............................................................................................ 21
Electric Range dimensions ................................................................................. 22
HR 1421; HR 1622................................................................................................. 22
Detailed views of HR 1421..................................................................................... 24
Detailed views of HR 1622..................................................................................... 27
All Gas Range dimensions .................................................................................. 30
HR 1124, HR 1134, HR 1135, HR 1136................................................................. 30
Detailed views of HR 1124..................................................................................... 34
Detailed views of HR 1134..................................................................................... 37
Detailed views of HR 1135..................................................................................... 40
Detailed views of HR 1136..................................................................................... 43
Dual Fuel Range dimensions .............................................................................. 46
HR 1924, HR 1934, HR 1935, HR 1936, HR 1954, HR 1955, HR 1956................. 46
Detailed views of HR 1924..................................................................................... 51
Detailed views of HR 1934..................................................................................... 54
Detailed views of HR 1935..................................................................................... 57
Detailed views of HR 1936..................................................................................... 60
Detailed views of HR 1954..................................................................................... 63
Detailed views of HR 1955..................................................................................... 66
Detailed views of HR 1956..................................................................................... 69
Anti-tip device ...................................................................................................... 72
Before installation .................................................................................................. 72
Checking the installation space............................................................................. 73
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Included accessories ............................................................................................. 73
Installation dimensions of locking bolt................................................................... 74
Installing the range with the anti-tip device ........................................................... 74
Disconnecting the range from the anti-tip device.................................................. 77
Electrical connection........................................................................................... 78
Data plate.......................................................................................................... 79
Plumbing............................................................................................................... 81
Notes on connecting to the water supply.............................................................. 81
Attach the stainless steel hose to the range.......................................................... 82
Connecting to the water supply............................................................................. 82
Gas connection .................................................................................................... 83
Converting to another gas type.......................................................................... 85
Burner ratings....................................................................................................... 86
Burner rating of HR 1124....................................................................................... 86
Burner rating of HR 1134....................................................................................... 87
Burner rating of HR 1135....................................................................................... 88
Burner rating of HR 1136....................................................................................... 89
Burner rating of HR 1924....................................................................................... 89
Burner rating of HR 1934....................................................................................... 90
Burner rating of HR 1935....................................................................................... 90
Burner rating of HR 1936....................................................................................... 91
Burner rating of HR 1954....................................................................................... 91
Burner rating of HR 1955....................................................................................... 92
Burner rating of HR 1956....................................................................................... 92
Caring for the environment................................................................................. 93
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using the appliance, follow basic safety precautions, including the
following:
Read all instructions before installation and use of the range to prevent
accidents and machine damage.
This range complies with current safety requirements. However,
improper use of the appliance can result in personal injury or
damage to property.
Please read the installation instructions carefully before installing
and connecting the appliance.
Read the operating instructions before using the range for the first
time. To prevent accidents and damage to the appliance, always
observe both the installation instructions and operating
instructions. Both documents contain important information about
installation, safety, use and maintenance.
Miele cannot be held liable for damage occurring as a result of
non-compliance with the instructions.
Keep these installation instructions and operating instructions in a
safe place and pass them on to any future owner.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Use
ʊꢀThis range is intended for domestic use and use in other similar
environments.
ʊꢀThis appliance is not intended for outdoor use.
ʊꢀUse the range exclusively under normal domestic conditions:
– Use the oven for baking, roasting, broiling, defrosting, canning
and drying food.
– Use the stovetop to prepare food and keep it warm.
Any other use is not permitted.
ʊꢀRisk of Fire! Do not use this oven to store or dry combustible
materials.
ʊꢀPersons who lack physical, sensory or mental abilities, or
experience with the appliance should not use it without supervision
or instruction by a responsible person.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Children
ʊꢀChildren must be kept away from the range unless constantly
supervised.
ʊꢀPlease supervise any children in the vicinity of the range and do
not let them play with the appliance.
ʊꢀBurn hazard from improper use! Do not allow children to operate
the oven.
ʊꢀDanger of suffocation! Ensure that any plastic wrappings, bags,
etc. are disposed of safely and kept out of the reach of children.
ʊꢀBurn hazard!
Keep the spaces above and behind the range clear of any items that
could draw the attention of children. Otherwise, they can be tempted
into climbing onto the appliance.
ʊꢀDanger of injury. Never allow children to hang or lean on any part
of the appliance.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Technical safety
ʊꢀInstallation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation
instructions. Contact Miele’s Technical Service Department for
examination, repair or adjustment. Repairs and other work by
unauthorized persons could be dangerous and may void the
warranty.
ʊꢀDo not carry or lift the range by the oven door handle or the
control panel!
ʊꢀCheck whether the anti-tip device is properly installed and locked
into place (see "Anti-tip device"):
– The anti-tip device must be fastened to the floor or wall with
suitable screws.
– You must be able to feel that the locking latch is engaged in the
bolt of the anti-tip device.
ʊꢀSlide the range's locking latch into place on the anti-tip device.
The locking latch must be noticeably engaged with the bolt of the
anti-tip bracket.
ʊꢀA damaged range can be dangerous. Always check for visible
signs of damage. Never use a damaged appliance.
ʊꢀReliable and safe operation of the range can only be guaranteed if
it is connected to the public power supply.
ʊꢀThe electrical safety of the range can only be guaranteed when it
is properly grounded. Compliance with this essential safety
requirement is absolutely mandatory. If in any doubt, please have
the building's wiring system inspected by a qualified electrician.
ʊꢀTo avoid damaging the range, make sure that the connection data
(voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
ʊꢀDuring installation, maintenance and repair work, e.g. if the oven
lighting is broken (see "Frequently asked questions"), the range must
be completely disconnected from the household electricity supply.
The gas supply must be shut off. Ensure that this is the case by:
– removing the fuse,
– "tripping" the circuit breaker, or
– unplugging the unit. Pull the plug not the cord.
– Shut off the gas supply and, if necessary, disconnect the range
from the gas line. Installation and maintenance of the gas
connection must be performed by qualified installers, service
agencies or gas providers.
ʊꢀDo not use a power strip or extension cord to connect the range
to electricity. These are a fire hazard and do not guarantee the
required level of appliance safety.
ʊꢀAny contact with live connections or tampering with the electrical
or mechanical components of the range will endanger your safety
and may lead to appliance malfunctions.
Do not open the appliance housing under any circumstances.
ʊꢀThis appliance must not be installed and operated in mobile
installations (e.g. on a ship).
ʊꢀAny repairs not performed by a Miele authorized service
technician will void the warranty.
ʊꢀDefective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
ʊꢀRisk of electric shock! If the ceramic surface of the stovetop is
defective or chipped, cracked or broken in any way, immediately
switch the stovetop off and do not continue to use it. Disconnect the
range from the power supply and contact Miele Technical Service.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
ʊꢀIn order for the range to function properly, it requires an adequate
supply of cool air. Ensure that the air flow is not impaired. Also be
sure that the cool air supply is not excessively heated by other heat
sources (e.g. solid fuel stoves).
ʊꢀIf the range is installed behind a cabinet door, do not close the
door while the appliance is in operation. Heat and moisture can build
up behind the closed door and cause damage to the range and to
the surrounding cabinets and flooring. Do not close the door until
the appliance has completely cooled down.
ʊꢀDo not install kitchen cabinets above the range, since reaching
over a hot stovetop to access the cabinets can result in burns. If it is
necessary to install cabinets, you can reduce the risk of burns by
installing a range hood that extends at least 4 3/4" (12 cm) past the
bottom of the cabinets.
ʊꢀThe water shutoff valve must be accessible after the range has
been installed.
ʊꢀThe integrated Waterproof System offers protection against water
damage if the following conditions are met:
– The range is properly installed (connected to electric and water
supply).
– The range is repaired immediately whenever damage is detected.
– The water supply is shut off during extended periods of non-use
(e.g. vacation).
ʊꢀHard water, water containing minerals and water from reverse
osmosis filtering systems can damage the range. Only use filtered,
softened and demineralized water from the building's plumbing to
supply the range.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Preparing your appliance for an extended vacation
ʊꢀIf you elect to turn off the water to your home for an extended
period of time, please note that this may not be enough to reduce
the risk of a leak. To be completely safe, you must turn off the water
supply to each individual appliance.
Cleaning and care
ʊꢀDo not use a steam cleaner to clean the range.
The steam may reach electrical components and cause a short
circuit.
ʊꢀOnly clean parts listed in these Operating and Installation
Instructions.
ʊꢀScratches on the door glass can cause the glass to break.
Do not use abrasive cleaners, hard sponges, brushes or sharp metal
tools to clean the door glass.
ʊꢀThe shelf runners can be removed for cleaning purposes (see
"Cleaning and care"). Ensure they are correctly fitted after cleaning
and never operate the oven without the shelf runners inserted.
ʊꢀThere is a seal around the oven interior which seals the inside of
the door. Take care not to rub, damage or move the gasket.
ʊꢀDo not use oven cleaners. Commercial oven cleaners or oven
liners of any kind should not be used in or around any part of the
oven.
ʊꢀDebris should be removed before running the Self Clean program.
If not removed this debris can smoke causing the self-cleaning
program to turn itself off.
SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Model numbers
A list of the ovens described in these
operating instructions can be found on
the back page.
Items included with this range
The range is supplied with:
– Installation Instructions,
– Multiple operating instructions
(depending on model) for:
Data plate
The data plate is behind the toe-kick.
The toe-kick cover is attached to the
base of the range by magnets so it can
be removed and put back again easily.
– Electric Range
– Induction Range
– Convection Oven
– Gas Cooktop
There you can find the model number,
the serial number and the connection
data (voltage/frequency/maximum rated
load) for your range.
– Gas Convection Oven
– Speed Oven
– Warming Drawer
Have this information available when
contacting Miele Technical Service.
– an anti-tip device including screws
for fastening the range,
Distance to the range hood
– various accessories.
The minimum clearance between the
appliance and a range hood above will
be listed by the hood manufacturer.
If there is more than one appliance
installed below the range hood, each
with a different safety clearance, the
largest clearance must be used.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Toe-kick and drop guard
Installation of the drop guard
30" and 36" range
The components are located in the
packaging of the range.
The drop guard covers the gap
between the oven cavity and the door.
ĺ Open the oven door.
48" range
The components are already
mounted.
Installation of the toe-kick
The toe-kick has sheet metal lugs and
magnets by means of which it can be
positioned and attached to the base
of the range.
ĺ Lay the drop guard over the gap
between the oven cavity and the
door.
ĺ Position the toe-kick in such a way
that the sheet metal lugs are facing
the provided holes in the base.
ĺ Close the oven door.
ĺ Push the toe-kick onto the base of
the range until it audibly locks into
place.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Assembling the grill
ɘ Burn hazard!
The burners must be turned off and
allowed to cool completely.
ɘ Risk of injury!
ĺ Place the grill Ȧ into position.
The cast-iron grill is heavy.
Carry the grill carefully and place it
securely on a soft base so that it lies
flat.
Cleaning and care
Tip: All parts can be disassembled in
the reverse order. You can also remove
the frame for cleaning.
1
2
3
&
Grill
'
Grease tray
(
Frame
ĺ Using a soft sponge, clean grease
tray ȧ with a solution of warm water
and a small amount of liquid dish
soap. Dry the parts thoroughly after
cleaning.
ĺ Remove the grill Ȧ from the gas
cooktop.
ĺ Place the grease tray ȧ on top of the
frame Ȩ.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Mounting the RBGAG All Gas
Backguard
Optional accessories
All accessories and cleaning products
listed in these instructions are designed
to be used with the Miele range.
The rear of the range must be
accessible.
These can be ordered from the Miele
website (see end of this booklet for
contact details).
Mount the backguard before installing
the anti-tip device and connecting the
range.
When ordering, please have your model
number available.
ĺ Loosen the screws of the island trim.
ĺ Pull back the island trim slightly until
RBGAG All Gas Backguard/RBGDF
Dual Fuel Backguard
it can be removed.
1
Depending on the model, you can
exchange the existing island trim of
your appliance for a larger range
backguard. The backguard is available
in the following heights: 12" (305 mm)
and 20" (508 mm).
2
2
Mounting the RBGDF Dual Fuel
Backguard
The rear of the range must be
accessible.
Mount the backguard before installing
the anti-tip device and connecting of
the range.
&
'
Extender
Air ducts
ĺ Loosen the screws of the island trim.
ĺ Insert one extender Ȧ onto each of
ĺ Pull back the island trim slightly until
the left and right air ducts ȧ.
it can be removed.
ĺ Screw the extenders Ȧ into place
The backguard can be installed in
reverse order.
with 2 screws each.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
1
2
3
1
&
'
(
Backguard
Rear panel backguard
Inside panel
ĺ Place the backguard Ȧ face down on
a soft surface to avoid scratching.
The lower edge should line up with
the edge of the table, so that the
backguard lies flat.
ĺ Loosen the screws on the back of
backguard.
ĺ Remove the rear panel ȧ and the
2
inner panel Ȩ.
&
'
Backguard
Range
ĺ Slide the backguard Ȧ from above
on the air duct extenders.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
20" Backguard
ĺ Once the backguard is placed on the
range push the backguard
backwards.
ĺ Mount the inner panel and the rear
panel on the backguard using the
screws provided.
ĺ Mount the backguard on the range
using the screws provided.
12" Backguard
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
RBS Backsplash
The backsplash is intended for
mounting to a Miele range hood.
Observe the installation instructions of
the Miele range hood.
XKM 3000 W Remote Vision
Depending on the model, the range
maybe compatible with
RemoteVisionTM.
In order to use the RemoteVisionTM
monitoring service, you will require a
XKM 3000 W Communication Module.
Refer to the Operating and Installation
Instructions of the Miele XKM 3000 W
Communication Module.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Do not carry or lift the range by the oven door handle or the control panel!
The range is heavy.
Due to the size and weight of the appliance, installation should be performed
by two people.
The net weight of the range with accessories is as follows:
Model
Width
Net weight incl.
accessories:
HR 1421
HR 1622
HR 112x
HR 192x
29 15/16"
(760 mm)
approx. 307 lbs (140 kg)
HR 113x
HR 193x
35 15/16"
(913 mm)
approx. 405 lbs (180 kg)
approx. 573 lbs (260 kg)
HR 195x
47 15/16"
(1218 mm)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on installation
Installation location
This appliance is not intended for outdoor use.
Ranges with a connection to the water supply should not be installed in rooms
where there is a risk of freezing temperatures.
The floor of the space where the appliance is to be installed must be flat, level and
made of a strong, rigid material.
Because the range is heavy and requires attachment of the anti-tip device
supplied, the surface must be able to fully bear the load of the appliance. If
necessary, seek the advice of an architect or construction expert.
Ventilation
The air intake and outlet openings must not be covered or blocked in any way.
They should be dusted on a regular basis.
Required connections
Model
Electrical
connection
Gas connection
Plumbing
HR 1421
HR 1622
X
X
X
–
–
–
X
–
HR 112x
HR 113x
X
HR 192x
HR 193x
HR 195x
X
X
X
X Connection required
– Connection not provided
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
HR 1421; HR 1622
B
1
2
A
3
C
C
D
E
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
HR 1421; HR 1622
Position
Dimension
Description
Ȧ
ȧ
Ȩ
13" (330 mm)
18" (547 mm)
Maximum depth of top cabinet
Minimum distance to bottom edge of top cabinet
Distance from floor to cooktop surface
35 1/2"–37"
(901 - 940 mm)
Ǟ
ǟ
min. 30"
(762 mm)
Width of cabinet opening
30" (762 mm)
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
or 24" (609 mm) Minimum distance to a protected combustible
surface or if a Miele Ventilation Hood is used.
For all other Hoods, please consult with manufacturer's instructions
for required distances.
Ǡ
approx.
10 13/16"
(274 mm)
Maximum connection width right
and left
Location of
wall
receptacle
ǡ
Ǣ
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
The hatched areas represent the installation areas for the connections.
12" (305 mm) minimum distance is necessary from back of range to combustible rear wall
above countertop.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Detailed views of HR 1421
Side view of HR 1421
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Detailed front side view of HR 1421
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Rear view of HR 1421
E
E = Electrical connection
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Detailed views of HR 1622
Side view of HR 1622
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Detailed front side view of HR 1622
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Electric Range dimensions
Rear view of HR 1622
W
E
E = Electrical connection
W = Water connection
29
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
HR 1124, HR 1134, HR 1135, HR 1136
B
C
1
2
4
A
3
D
D
E
F
ǟ In case of combustible construction, an additional minimum clearance of 6" (each side)
is necessary.
Position
Dimension
13" (330 mm)
18" (457 mm)
Description
Ȧ
ȧ
Ȩ
Maximum depth of top cabinet
Minimum distance to bottom edge of top cabinet
Distance from floor to cooktop surface
35 1/2"–37"
(901 - 940 mm)
ȩ
10" (254 mm)
Minimum distance to combustible surfaces
30
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
HR 1124
Position
Dimension
Description
Ǟ
min. 30"
(762 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
approx.
10 13/16"
(274 mm)
Maximum connection width right
and left
Location of
wall
receptacle
Ǣ
ǣ
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
HR 1134
Position
Dimension
Description
Ǟ
min. 36"
(914 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
36" (914 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL Blower).
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XXL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
Ǣ
ǣ
approx. 13 3/4" Maximum connection width right
(350 mm) and left
Location of
wall
receptacle
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
HR 1135, HR 1136
Position
Dimension
Description
Ǟ
min. 36"
(914 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL or DRxB XXL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
Ǣ
ǣ
approx. 13 3/4" Maximum connection width right
(350 mm) and left
Location of
wall
receptacle
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
The hatched areas represent the installation areas for the connections.
12" (305 mm) minimum distance is necessary from back of range to combustible rear wall
above countertop.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed views of HR 1124
Side view of HR 1124
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed front side view of HR 1124
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Rear view of HR 1124
G
E
E = Electrical connection
G = Gas connection
36
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed views of HR 1134
Side view of HR 1134
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed front side view of HR 1134
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Rear view of HR 1134
G
E
E = Electrical connection
G = Gas connection
39
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed views of HR 1135
Side view of HR 1135
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed front side view of HR 1135
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Rear view of HR 1135
G
E
E = Electrical connection
G = Gas connection
42
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed views of HR 1136
Side view of HR 1136
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Detailed front side view of HR 1136
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
All Gas Range dimensions
Rear view of HR 1136
G
E
E = Electrical connection
G = Gas connection
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
HR 1924, HR 1934, HR 1935, HR 1936, HR 1954, HR 1955,
HR 1956
B
C
1
2
4
A
3
D
D
E
F
ǟ In case of combustible construction, an additional minimum clearance of 6" (each side)
is necessary.
Position
Dimension
13" (330 mm)
18" (457 mm)
Description
Ȧ
ȧ
Ȩ
Maximum depth of top cabinet
Minimum distance to bottom edge of top cabinet
Distance from floor to cooktop surface
35 1/2"–37"
(901 - 940 mm)
ȩ
10" (254 mm)
Minimum distance to combustible surfaces
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
HR 1924
Position
Dimension
Description
Ǟ
min. 30"
(762 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
approx.
10 13/16"
(274 mm)
Maximum connection width right
and left
Location of
wall
receptacle
Ǣ
ǣ
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
HR 1934
Position
Dimension
Description
Ǟ
min. 36"
(914 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
36" (914 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL Blower).
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XXL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
Ǣ
ǣ
approx. 13 3/4" Maximum connection width right
(350 mm) and left
Location of
wall
receptacle
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
HR 1935, HR 1936
Position
Dimension
Description
Ǟ
min. 36"
(914 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
30" (762 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XL or DRxB XXL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
Ǣ
ǣ
approx. 13 3/4" Maximum connection width right
(350 mm) and left
Location of
wall
receptacle
approx. 4 1/2" Maximum connection height
(115 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
HR 1954, HR 1955, HR 1956
Position
Dimension
Description
Ǟ
min. 48"
(1219 mm)
Width of cabinet opening
ǟ
Ǡ
6“ + Ǟ + 6"
37" (940 mm)
36" (914 mm)
In case of the presence of combustible material an
additional minimum clearance of 6“ (each side) is
necessary. Ensure local codes are observed.
Minimum distance between the top of the cooking
area and the bottom of an unprotected
combustible surface.
Minimum distance between the top of the cooking
area and the bottom of the Miele Range Hood
(DAR model with DRxB XXL Blower).
For all other Hoods, please consult with manufacturer's instructions
for required distances.
ǡ
Ǣ
ǣ
approx. 20 1/2" Maximum connection width right
(518 mm) and left
Location of
wall
receptacle
approx. 3 1/2" Maximum connection height
(90 mm)
approx. 2 13/16" Maximum connection depth
(72 mm)
The hatched areas represent the installation areas for the connections.
12" (305 mm) minimum distance is necessary from back of range to combustible rear wall
above countertop.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1924
Side view of HR 1924
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1924
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1924
G
W
E
E = Electrical connection
W = Water connection
G = Gas connection
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1934
Side view of HR 1934
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1934
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1934
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1935
Side view of HR 1935
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1935
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1935
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1936
Side view of HR 1936
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1936
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1936
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1954
Side view of HR 1954
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1954
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1954
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1955
Side view of HR 1955
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1955
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1955
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed views of HR 1956
Side view of HR 1956
47 5/8" (1210mm)
28 15/16" (734.4mm)
27 1/4" (692mm)
24 15/16" (633mm)
1 3/4" (45mm)
(x) = Depending on the appliance height adjustment: 4" - 5 1/2 " (101.6 mm -
139.7 mm)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Detailed front side view of HR 1956
2 3/8" (60mm)
1 9/16" (40mm)
1/8" (3mm)
1 1/4" (32mm)
1 3/4" (45mm)
2 9/16" (65.2mm)
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Fuel Range dimensions
Rear view of HR 1956
W
G
E
E = Electrical connection
W = Water connection
G = Gas connection
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
Before installation
We recommend removing the oven
door before installing the range (see
"Removing the door" in the Operating
Instructions) and all accessories from
the oven interior. This will make it
easier to install the appliance in its
designated space.
ɘ WARNING
Children and adults can tip over the
range if has not been secured. This
may lead to fatal injuries.
Make sure that the anti-tip device is
properly installed and locked into
place. It should be screwed to the
floor or wall and engage with the
center of the bottom of the range.
You must take care to protect the
installed flooring when moving the
range.
After moving the range, make sure
that the anti-tip device locks back
into place. It should be screwed to
the floor or wall and engage with the
center of the bottom of the range.
Do not use the range if the anti-tip
device has not been properly
installed and engaged.
Once the range has been installed and
secured against tipping, you can
reattach the oven door (see
"Reinstalling the door" in the
Operating Instructions).
Do not carry or lift the range by the
oven door handle or the control
panel!
Due to the size and weight of the
appliance, installation should be
carried out by two people.
Any opening in the wall behind the
appliance and in the floor under the
appliance shall be sealed.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
Checking the installation
space
Included accessories
– 1 anti-tip device
– 4 screws
Install the anti-tip device on the floor,
concrete wall or timber framing. The
surface must be flat and level.
– 4 plugs
ĺ Check the base surface.
ĺ Check the installation dimensions.
ĺ Check the diagrams for the building's
supply lines. Make sure that you do
not damage any lines when drilling
the holes to attach the anti-tip
device.
ĺ Check the position of the electric,
gas and water connections (see
"Electrical connection", "Gas
connection" and "Plumbing"). An
overview on the electrical
connections for your range can be
found in "Notes on installation".
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
Installation dimensions of
locking bolt
Installing the range with the
anti-tip device
ɘ Wear safety shoes and gloves.
The anti-tip device should be installed
at the bottom rear of the range at the
midpoint of the width.
ĺ Measure the installation space for the
Anti-tip device, front view
range close to floor level.
Model
Width
X
ĺ Mark the wall at the middle of the
space width.
HR 1421
HR 1622
HR 112x
HR 192x
29 15/16"
(760 mm)
3 13/16"
(97 mm)
ĺ Position the notch of the anti-tip
bracket on the wall marking.
The anti-tip device must fit tightly on
the floor or the wall.
HR 113x
HR 193x
35 15/16"
(913 mm)
3 13/16"
(97 mm)
HR 195x
47 15/16"
(1218 mm)
3 1/4"
(82 mm)
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
Do not push the range into
position until all the utility
2
connections have been made.
The toe-kick cover is attached to the
base of the range by magnets.
1
3
Attaching to the floor
3
1
2
2
&
'
Toe-kick cover
Locking clamp
1
ĺ Remove the toe-kick cover Ȧ from
the appliance.
ĺ Pull out the locking clamp ȧ.
Attaching to the wall
The locking clamp extends through
the toe-kick plate of the range
housing. Its length is approximately
equal to the depth of the range.
&
Anti-tip device
'
Screws
(
Locking nut
A slot is located in the non-visible rear
section of the locking clamp. This slot
will engage with the bolt of the anti-tip
device when you slide the locking
latch into the range.
ĺ Secure the anti-tip device Ȧ to the
floor surface with suitable bearing
capacity, either to the floor or wall.
using four screws ȧ.
ĺ Screw the locking nut Ȩ to the bolt,
see the "Installation dimensions of
locking bolt" table.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
Complete all necessary
Use a level to align the range
connections for the range. Read the
information in the "Electrical
connection", "Gas connection" and
"Plumbing" sections.
– Left and right rear adjustment ȧ:
You will need a 3/8" (10 mm)
open-end wrench.
– Left and right front adjustment Ȩ:
You will need a 5/8" (16 mm)
The range can be damaged if it is
lifted using the cover, the trim or
the door handle.
Open the oven door and hold the
appliance by the front of the oven
interior.
open-end wrench for the locknut
and an open-end wrench (1/2" (13
mm)) for the adjustable nut.
Lift the range and move it with the
help of the rear wheels.
ĺ Slide the range into position, guiding
the middle of the appliance onto the
anti-tip device. Slide the appliance all
the way back to the wall.
3
2
1
2
3
&
'
(
Locking clamp
Rear adjustment
Front adjustment
ĺ Align the range.
ĺ Slide the locking clamp Ȧ firmly back
into the range.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-tip device
In the range housing, there is an
opening Ȧ for the bolt ȧ of the anti-tip
device. The opening allows the range to
be slid onto the anti-tip device and
back to the wall.
Disconnecting the range from
the anti-tip device
ɘ WARNING
Children and adults can tip over the
range if has not been secured. This
may lead to fatal injuries.
The locking clamp Ȩ must noticeably
engage with the bolt ȧ so that anti-tip
protection is ensured for the range.
If you need to remove the range from
its installation space, e.g. for service,
you first need to disconnect the
1
2
appliance from the anti-tip device.
ĺ Follow the instructions for installation
in reverse order.
3
&
Opening in the range housing
'
Bolt of the anti-tip device
(
Locking clamp with slot
The toe-kick cover can only be
attached if the locking clamp Ȩ has
been slid all the way into the
appliance.
ĺ Mount the toe-kick cover on the
range.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
ɘ CAUTION:
During installation, maintenance and
repair work, the range must be
disconnected from the electricity
supply. It is only completely isolated
from the electricity supply if the plug
fuses have been fully unscrewed
(where applicable), the main circuit
breaker has been tripped or the
power cable has been unplugged
from the wall outlet.
Installation, repair and maintenance
work should only be performed by a
Miele authorized service technician.
Work by unqualified persons can
cause considerable danger to users.
Miele cannot be held liable for any
damage arising as a result of such
work.
To avoid damaging the range, make
sure that the connection data
(voltage and frequency) on the data
plate correspond to the building's
power supply before connecting the
appliance.
When in doubt, consult a qualified
electrician.
The power cable plug must be
inserted into a suitable outlet that
has been installed and grounded in
compliance with all applicable local
regulations.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Installer: Please pass these
instructions on to the customer.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection
Type
Connecting
line
NEMA
Electrical supply
HR 1421
approx.
5' 11"
(1.80 m)
120/208 V
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
14-40 P
plug
40 A
40 A
HR 1421
approx.
5' 11"
(1.80 m)
120/240 V
14-40 P
plug
HR 1622
HR 195x
approx.
5' 11"
(1.80 m)
120/208 V
or
120/240 V
40 A
14-40 P
plug
HR 192x
HR 193x
approx.
5' 11"
(1.80 m)
14-30 P
plug
120/208 V
or
120/240 V
30 A
HR 112x
HR 113x
approx.
5' 11"
5-15 P plug
120 V
15 A
(1.80 m)
Data plate
The data plate with the connection information for the range is located in the
middle of the base front behind the removable toe kick cover (see "Guide to the
range").
SAVE THESE INSTRUCTIONS FOR THE ELECTRICAL INSPECTOR'S USE.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
This appliance must be grounded in
compliance with all applicable local
and national regulations.
Installation, repair and maintenance
work should only be performed by a
Miele authorized service technician
in compliance with local regulations
and the ANSI National Electrical
Code / NFPA 70 in the United States
or the Canadian Electrical Code, Part
I in Canada (CSA standard C22.1).
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
– A water shut-off valve must be
Notes on connecting to the
water supply
provided between the stainless steel
hose and the household water supply
to ensure that the water supply can
be cut off if necessary.
Disconnect the appliance from the
electrical power supply before
connecting the water line.
Turn off the water supply before
connecting the water lines for the
range.
– The water shut-off valve must be
accessible after installation.
– The water pressure must be between
1 and 10 bar (105 and 106 Pa or 14.5
and 145 psi). If the pressure is higher
than this, install a pressure reducer.
– All devices used for connecting the
appliance to the water supply must
comply with the current national and
local safety regulations in the country
in which the range is being installed.
– The stainless steel hose provided has
a length of 4 ft. 11" (1.5 m). Longer
intake hoses are available if
– We do not recommend the use of
water produced by Reverse Osmosis
filtration systems. Along with the
possibility of detrimental health
effects, highly purified water can
cause the premature corrosion and
failure of components in your
appliance. Furthermore, many RO
systems, especially under counter
systems, do not deliver sufficient
water pressure to allow the appliance
to operate properly. Connection to
such a water supply could cause
poor performance, premature
appliance failure, leaks and/or
flooding. Miele will not be
necessary. Do not shorten the hoses.
– The total hose length must not
exceed 24.5 ft. (7.5 m).
Ensure that the shut-off valve is
accessible after installation.
If the stainless steel hose is
damaged, it must be replaced with a
hose suitable for supplying drinking
water.
responsible for any damages caused
by appliances connected to these
systems. Only use filtered, softened
and demineralized water from the
building's plumbing to supply the
oven.
– Connect the range to a cold water
supply only.
– The range may be connected to a
water supply without a non-return
valve.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Attach the stainless steel hose Connecting to the water
to the range.
supply
Make sure that the stainless steel
hose is not kinked or damaged. The
stainless steel hose must not be
shortened.
Danger of electric shock!
Disconnect the range from the
electrical supply before connecting it
to the water supply.
ĺ Remove the cover from the water
supply connection at the back of the
range.
ĺ Check that the gasket is present.
Replace, if not, insert before
connecting to the water supply.
ĺ Take the angled side of the stainless
steel hose and check whether a
gasket is present. If not, insert one.
ĺ Screw the stainless steel hose
coupling nut onto the threaded union.
ĺ Ensure that the hose is correctly
3/8"
seated.
ĺ Connect the stainless steel hose to
the water supply.
Old or previously used tubing should
never be connected to the range.
Only use the stainless steel hose
supplied.
ĺ Ensure that the hose is correctly
seated.
ĺ Slowly open the shut-off valve to the
water supply and check for leaks.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Gas connection
The gas connections must be
ɘ Connection to the gas supply
and any switchover to a different gas
type may only be performed by a
duly authorized gas company
technician. This technician is
responsible for proper function at the
installation site.
In Massachusetts installation must
be performed by a licensed
plumber/gas fitter.
arranged in such a way that they are
not heated and damaged by the
operation of the range.
In particular, make sure that the gas
hose lines and connection fittings on
the range do not come into contact
with hot exhaust gases.
Flexible connecting lines can be
damaged by incorrect attachment.
Attach flexible connecting lines in
such a way so that they do not come
into contact with any moving kitchen
parts (e.g., a drawer) and are not
exposed to mechanical stress.
The range must be connected with
its own shut-off valve.
The gas connection must be
arranged in such a way that
connection is possible inside or
outside of the kitchen cabinets. The
shut-off valve must be accessible
and visible, after the opening of a
cabinet door, if necessary.
The range and the shut-off valve
must be disconnected from the gas
supply during gas pressure tests.
Disconnect the range and the shut-
off valve from the gas supply before
performing a gas pressure test at a
pressure of more than 1/2 psi
(3.5 kPA). Close the shut-off valve of
the gas supply before performing a
gas pressure test at a pressure of
less than or equal to 1/2 psi
The gas connection of the range is
desired for natural gas or liquid gas
(propane) according to the model.
Ask your gas company what kind of
gas is used and compare it with the
specifications on the data plate.
(3.5 kPA).
The range is not connected to an
exhaust vent.
Incorrectly sealed gas lines can lead
to a gas leak and thus to an
explosion.
Seal all gas lines with a suitable
thread sealant.
During the setup and connection of
the range, observe the applicable
installation conditions, especially
suitable ventilation measures.
Seal tightness tests on the range
must be performed according to
manufacturer specifications.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Gas connection
The gas connection must be
established only Miele-authorized
specialists according to the local and
following regulations:
National Fuel Gas Code
ANSI Z 21.1 / NFPA No. 54 for the
United States or the current Can /
CGA B 149.1 and 2 Installation
Codes of Gas Appliances for
Canada.
1/2"
G
NPT
The installation must conform with
local codes or, in the absence of
local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54.
The gas pressure may not
undershoot or exceed certain values.
Make sure that the maximum gas
pressure upstream of the gas
pressure controller does not amount
to more than 1/2 psi (3.5 kPA) for
natural and liquid gas.
Make sure that the minimum gas
pressure amounts to a 6" (150 mm)
water head in the case of natural gas
and a 11" (279,4 mm) water head in
the case of liquid gas.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Converting to another gas type
The gas connection of the range depends upon the model of the range.
If the range is not configured for the proper type of gas connection please contact
your Miele dealer.
If the range has to be converted over to another gas type, all jets must be
exchanged. A conversion kit is available as an optional accessory from the Miele
Technical Service Department.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1124
Gas type
Btu/hr
max
kW
max
Simmer burner
Power burner
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
22,000
20,150
23,200
23,200
71,000
71,000
94,200
94,200
3.70
3.70
5.70
5.70
6.45
5.90
6.79
6.79
20.80
20.80
27.59
27.59
Oven top burner
Oven bottom
burner
Total output
Cooktop
Maximum total
output Range
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1134
Gas type
Btu/hr
max
kW
max
Simmer burner
Power burner
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
22,000
20,150
25,500
27,000
110,000
110,000
135,500
137,000
3.70
3.70
5.70
5.70
6.45
5.90
7.47
7.90
32.20
32.20
39.67
40.10
Oven top burner
Oven bottom
burner
Total output
Cooktop
Maximum total
output Range
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1135
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
5.50
4.50
6.45
5.90
7.47
7.90
26.30
25.30
33.77
33.20
Simmer burner
Power burner
Grill
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
19,000
15,500
22,000
20,150
25,500
27,000
90,000
86,500
115,500
113,500
Oven top burner
Oven bottom
burner
Total output
Cooktop
Maximum total
output Range
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1136
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
3.80
4.20
6.45
5.90
7.47
7.90
24.60
25.00
32.07
32.90
Simmer burner
Power burner
Griddle
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
13,000
14,300
22,000
20,150
25,500
27,000
84,000
85,300
109,500
112,300
Oven top burner
Oven bottom
burner
Total output
Cooktop
Maximum total
output Range
Burner rating of HR 1924
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
20.80
20.80
Simmer burner
Power burner
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
71,000
71,000
Total output
Cooktop
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1934
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
32.20
32.20
Simmer burner
Power burner
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
110,000
110,000
Total output
Cooktop
Burner rating of HR 1935
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
5.50
4.50
26.30
25.30
Simmer burner
Power burner
Grill
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
19,000
15,500
90,000
86,500
Total output
Cooktop
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1936
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
3.80
4.20
24.60
25.00
Simmer burner
Power burner
Griddle
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
13,000
14,300
84,000
85,300
Total output
Cooktop
Burner rating of HR 1954
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
41.60
41.60
Simmer burner
Power burner
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
142,000
142,000
Total output
Cooktop
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Burner ratings
Burner rating of HR 1955
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
5.50
4.50
35.70
34.70
Simmer burner
Power burner
Grill
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
19,000
15,500
122,000
118,500
Total output
Cooktop
Burner rating of HR 1956
Gas type
Btu/hr
max
kW
max
3.70
3.70
5.70
5.70
3.80
4.20
34.00
34.40
Simmer burner
Power burner
Griddle
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
Natural gas
Propane gas
12,500
12,500
19,500
19,500
13,000
14,300
116,000
117,300
Total output
Cooktop
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
The cardboard box and packing
materials protect the appliance during
shipping. They have been designed to
be biodegradable and recyclable.
Disposal of your old appliance
Old electrical and electronic appliances
often still contain valuable materials.
However, they also contain harmful
substances that were essential for the
proper functioning and safe use of the
equipment. Handling these materials
improperly or disposing of them in your
household waste can be harmful to
your health and the environment.
Therefore, please do not dispose of
your old appliance with regular
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of children.
Danger of suffocation!
household waste.
Old appliances may contain materials
that can be recycled. Please contact
your local recycling authority about the
possibility of recycling these materials.
Please be sure that your old appliance
does not pose a danger to children
while being stored for disposal.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Please have the model and serial number
of your appliance available before
contacting Technical Service.
U.S.A.
Canada
Miele, Inc.
Importer
Miele Limited
National Headquarters
9 Independence Way
Princeton, NJ 08540
Headquarters and Miele Centre
161 Four Valley Drive
Vaughan, ON L4K 4V8
800-843-7231
609-419-9898
609-419-4298
Phone:
Fax:
Customer Care Centre
Phone:
800-565-6435
905-532-2272
Technical Service & Support
Nationwide
800-999-1360
888-586-8056
Phone:
Fax:
Germany
Manufacturer
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
94
Download from Www.Somanuals.com. All Manuals Search And Download.
All Electric: HR1421; HR1622; All Gas: HR1124; HR1134; HR1135;
HR1136; Dual Fuel: HR1924; HR1934; HR1935; HR1936; HR1954;
HR1955; HR1956
en–US, CA
M.-Nr. 09 898 161 / 02
ħ
Download from Www.Somanuals.com. All Manuals Search And Download.
|