Nu Technology Computer Hardware 6U Compact PCI Highly Integrated Single Slot Dual Bridge Low Power Pentium III CPU Module User Manual

NuIPC  
cPCI-6760DK/P5  
6U CompactPCI Highly Integrated Single Slot  
Dual Bridge Low Power Pentium-III CPU Module  
User’s Guide  
Recycled Paper  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting service from ADLINK  
·
Customer Satisfaction is the most important priority for ADLINK Tech Inc.  
If you need any help or service, please contact us.  
ADLINK Technology Inc.  
Web Site  
Sales & Service  
NuDAQ + USBDAQ  
Technical  
Support  
Automation  
NuIPC  
NuPRO / EBC  
+886-2-82265877  
TEL  
FAX  
+886-2-82265717  
Address  
9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan.  
·
Please email or FAX us of your detailed information for a prompt,  
satisfactory and constant service.  
Detailed Company Information  
Company/Organization  
Contact Person  
E-mail Address  
Address  
Country  
TEL  
FAX  
Web Site  
Questions  
Product Model  
OS:  
Computer Brand:  
M/B:  
CPU:  
Environment to Use  
Chipset:  
BIOS:  
Video Card:  
Network Interface Card:  
Other:  
Detail Description  
Suggestions to ADLINK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
List of Tables...................................................................................... iii  
Chapter 1 Introduction........................................................................ 1  
1.1 Checklist...................................................................................................1  
1.2 Description ...............................................................................................3  
1.3 Features...................................................................................................4  
1.4 Specifications...........................................................................................4  
1.4.1  
1.4.2  
Specifications of the cPCI-6760DK/P5 .......................................4  
Peripheral Connectivity for cPCI-6760DK/P5 .............................9  
1.5 Functional Block Diagram ......................................................................10  
1.6 Mechanical outline drawing....................................................................11  
1.6.1  
Outline drawing for cPCI-6760DK/P5 CPU board.....................11  
Chapter 2 Jumpers and Connectors ............................................... 12  
2.1 Jumpers, Connectors and LED Indicators on the cPCI-6760DK/P5 ......16  
2.1.1  
2.1.2  
JP1 on cPCI-6760DK/P5 ..........................................................17  
Keyboard and Mouse Combo Connector (CN4) on the  
cPCI-6760DK/P5 ......................................................................17  
Ethernet Connectors (CN6, 7) ..................................................18  
Serial Port COM1 Connector (CN1)..........................................18  
VGA Connector (CN3)..............................................................18  
USB (Port A) Connector (CN5).................................................18  
Secondary IDE Connectors (44-pin, CN2)................................19  
Primary IDE Interface (40-pin, CN11).......................................20  
Parallel Port Connector on DB-6760J3 (CN9)..........................21  
2.1.3  
2.1.4  
2.1.5  
2.1.6  
2.1.7  
2.1.8  
2.1.9  
2.1.10 FDD Interface (34-pin, CN10)...................................................21  
2.1.11 Ping header P3 Pin Assignments .............................................22  
2.1.11 CompactPCI J1 Pin Assignments.............................................23  
2.1.12 CompactPCI J2 Pin Assignments.............................................24  
2.1.13 CompactPCI J4 Pin Assignments.............................................25  
2.1.14 CompactPCI J5 Pin Assignments.............................................26  
2.1.15 LAN Port Indicators (Integrated in LAN1 (CN6) and LAN2  
(CN7)).......................................................................................27  
2.1.16 IDE Activity LED Indication......................................................28  
2.1.17 Power LED Indication ...............................................................28  
2.1.18 WDT LED Indication.................................................................28  
Table of Contents · i  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Getting Started................................................................. 29  
3.1 CPU Installation..................................................................................... 30  
3.2 Memory Installation ............................................................................... 30  
3.3 CF Installation ....................................................................................... 31  
3.3.1  
3.3.2  
DB-6760CF Outline, Jumper and Connectors ......................... 32  
DB-6760CF Installation for cPCI-6760DK/P5 and CF card  
notice ....................................................................................... 33  
Removing the DB-6760CF from the cPCI-6760DK/P5 ............ 33  
3.3.3  
3.4 HDD Installation .................................................................................... 34  
3.4.1  
3.4.2  
HDD/FFD Installation for cPCI-6760DK/P5 ............................. 34  
Removing HDD/FFD from cPCI-6760DK/P5............................ 35  
3.5 Device Connection for OS Installation................................................... 35  
3.5.1  
Using the cPCI-6760DK/P5 with ADLINK’s cBP-6108 and  
6515 series backplane............................................................. 35  
Using the cPCI-6760DK/P5 on other backplanes.................... 35  
3.5.2  
3.6 Notice for Rear I/O Connection ............................................................. 36  
3.6.1  
3.6.2  
The I/O implementation is only supported by rear I/O board ... 36  
The I/O implementation is supported by both rear I/O and front  
I/O............................................................................................ 36  
LAN1, LAN2 Front and Rear I/O Connecting Selection........... 37  
3.6.3  
Chapter 4 Driver Installation ............................................................ 38  
4.1 VGA Drivers Installation ........................................................................ 39  
4.1.1  
4.1.2  
4.1.3  
Driver Installation on Windows 2000 ....................................... 39  
Driver Installation on Windows 98 ........................................... 40  
Driver Installation on Windows NT........................................... 41  
4.2 LAN Drivers Installation......................................................................... 42  
4.2.1  
4.2.2  
4.2.3  
4.2.4  
Software and Drivers Support.................................................. 42  
Driver Installation on Windows 2000 ....................................... 42  
Driver Installation on Windows 98 ........................................... 43  
Driver Installation on Windows NT........................................... 44  
Chapter 5 Watchdog and Utilities.................................................... 45  
5.1 Watchdog Timer Configuration ............................................................. 45  
5.1.1  
5.1.2  
WDT Programming .................................................................. 46  
How to Test the WDT? ............................................................ 46  
5.2 Hardware Doctor Utility.......................................................................... 47  
5.3 Intel Preboot Execution Environment (PXE).......................................... 48  
5.4 Intel Adapter Teaming........................................................................... 49  
Warranty Policy ................................................................................. 50  
ii · Table of Contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
List of Tables  
Table 1:  
Table 2:  
Table 3:  
Table 4:  
cPCI-6760DK/P5 functional table ................................................3  
Peripheral Connectivity for cPCI-6760DK....................................9  
JP1 Clear CMOS content...........................................................17  
Keyboard/Mouse Combo Connector (CN4) on  
cPCI-6760DK/P5 front board.....................................................17  
Table 5:  
Ethernet Connector LAN1 (CN6) and LAN2 (CN7) on  
cPCI-6760DK/P5 front board.....................................................18  
Table 6:  
Table 7:  
Table 8:  
Table 9:  
Table 10:  
Table 11:  
Table 12:  
Serial Port COM1 (CN1) on cPCI-6760DK/P5 front board.........18  
VGA Connector (CN3) on cPCI-6760DK/P5 front board ...........18  
USB Connector (CN5) on cPCI-6760DK/P5 front board............18  
Primary IDE channel (CN11) on DB-6760J3 .............................20  
Parallel Ports LPT1 (CN9) on DB-6760J3 .................................21  
FDD Interface (CN3) on DB-6760J3..........................................21  
Ping header P3 pin assignments on cPCI-6760DK and  
DB-6760J3.................................................................................22  
Table 13:  
Table 14:  
Table 15:  
Table 16:  
Table 17:  
Table 18:  
Table 19:  
Table 20:  
Table 21:  
Table 22:  
Table 23:  
Table 24:  
CompactPCI J1 pin assignments...............................................23  
CompactPCI J2 Pin Assignments..............................................24  
ComapctPCI J4 pin assignments...............................................25  
CompactPCI J5 pin assignments...............................................26  
Amber LED indication in LAN port.............................................27  
Green LED indication in LAN port..............................................27  
IDE Activity LED indication ........................................................28  
Power LED indication ................................................................28  
WDT LED indication ..................................................................28  
JP1 DB-6760CF Master/Slave Setting.......................................32  
LAN1 Connecting Selection.......................................................37  
LAN2 Connecting Selection.......................................................37  
List of Tables · iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Introduction  
This manual is designed to give you information on the cPCI-6760DK/P5  
single board computer module. The topics covered in this chapter are as  
follows:  
·
·
·
·
·
·
Checklist  
Descriptions  
Features  
Specifications  
Functional block diagram  
Mechanical outline drawing  
1.1 Checklist  
The default version of cPCI-6760DK/P5 includes pre-installed 64MB RAM  
and CF card socket. However, the CPU module may be equipped with  
different capacity of RAM or HDD by request. Please check your  
configurations with your dealer and check that your package is complete and  
contains the items below. If you discover damaged or missing items, please  
contact with your dealer.  
·
The cPCI-6760DK/P5 SBC (May be equipped with different capacity of  
RAM or HDD. Those items may vary according to the different  
configuration request. The CPU is pre-soldered and the CPU heatsink is  
pre-mounted.)  
·
One 2.5” ATA HDD accessory pack (P/N: 58-00023-000) including  
special designed 44-wire connection cable and screw kit. (This  
accessory pack will not be available if 2.5” ATA HDD is pre-mounted by  
request.)  
Introduction · 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
·
One DB-6760CF removable CompactFlash socket adaptor (which is  
pre-mounted on the CPU module for the standard configuration delivery.  
The DB-6760CF may not be included if customer request  
pre-configuring 2.5” ATA HDD or by OEM project request.)  
Y cable for PS/2 keyboard and mouse connection. (P/N: 30-01016-000)  
This User’s Manual  
·
·
·
ADLINK CD  
Note: The delivery package of the cPCI-6760DK/P5 OEM version  
(non-standard configuration, functionality, customized logo,  
modified faceplate or package) may vary according to the  
different customization request.  
2 · Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 Description  
ADLINK’s cPCI-6760DK/P5 is a powerful and flexible CompactPCI host slot  
processor board based on the Intel BGA2 Mobile (or Low Voltage) Pentium III  
processor. This board is specially designed to add total system functional  
density to ADLINK’s 6U CompactPCI platform for CTI and Telecom  
applications. It is also suitable for clustering high-availability, high-density and  
high-reliability embedded applications where performance and a rich feature  
set are mandatory.  
The CPU module uses the well-proven Intel 440BX chipset, which supports a  
processor front side bus (FSB) running at 100MHz and PC-100 SDRAM up to  
512MB, making the cPCI-6760DK/P5 performs outstand from its peers.  
Moreover, the Embedded Intel Architecture guarantees long life availability.  
The highly integrated design makes the cPCI-6760DK/P5 fully functional  
within only single slot space. User can access RS-232, AGP-VGA, LPT, USB,  
Keyboard, Mouse and Dual Ethernet ports on the front panel.  
cPCI-6760DK/P5 functional Table  
Model  
cPCI-6760DK/P5  
Processor  
Processor FSB  
Chipset  
Intel BGA2 Pentium-III 500MHz  
100 MHz  
Intel 440BX  
Memory Size  
Memory Type  
Graphic  
Up to 512MB, Pre-installed 64MB  
PC-100 SDRAM in 144-pin SO-DIMM  
SMI SM721  
Video Memory  
Serial Port  
Parallel Port  
USB  
Build-in SM721 4MB VRAM  
1
1
1
Ethernet Port  
EIDE  
2 Ports (Intel 82559)  
2 UDMA-33 channels*  
Yes  
FDD I/F  
Flash Storage  
cPCI Slots Support  
Removable CompactFlash Socket  
14 slots, all bus mastering  
Table 1: cPCI-6760DK/P5 functional table  
Introduction · 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 Features  
·
·
·
·
PICMG 2.0 CompactPCI Specification R.3.0 Compliant  
PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant  
Standard 6U form factor, 1-slot (4TE/HP) width  
Pre-mounted low voltage BGA2 Pentium-III 500MHz CPU with 100MHz  
FSB  
·
Pre-installed 64MB 144-pin SO-DIMM PC-100 RAM, support up to  
512MB  
·
·
Build-in housing for 2.5” low profile HDD  
Supports up to 1 USB ports, 1 serial port, 1 parallel port, 1 floppy  
interface  
·
·
Supports 14 bus-master PCI devices on CompactPCI bus peripheral  
slots  
On-board high performance AGP 2x VGA display output by SMI SM721  
controller  
·
·
·
·
Supports up to dual 10/100Mb Ethernet ports  
Supports Intel pre-boot execution environment (PXE) for boot from LAN  
Pre-installed CompactFlash type-II socket via removable daughter board  
Supports remote console on Serial ports  
1.4 Specifications  
1.4.1 Specifications of the cPCI-6760DK/P5  
General CompactPCI Features  
·
·
·
PCI Rev.2.1 compliant  
PICMG 2.0 CompactPCI Specification R.3.0 Compliant  
PICMG 2.7 CompactPCI Dual System Bus specification R1.0 compliant  
Form Factor  
·
·
Standard 6U CompactPCI (board size: 233.35mm x 160mm)  
1-slot (4 TE/HP, 20.32mm) width, incl. housing of 2.5” HDD  
CPU/Cache  
Intel BGA2 Low Voltage Pentium III with 256KB on-die L2 cache @  
500MHz speed & 100MHz FSB  
·
4 · Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chipset  
·
·
Intel 440BX AGPset  
Intel 82443BX and 82371EB(PIIX4E)  
BIOS: Award PnP BIOS  
·
·
·
BIOS write protection, provide anti-virus capability  
On-board Ethernet disable selectable  
DMI BIOS Support: Desktop Management Interface (DMI) allows users to  
download system hardware-level information such as CPU type, CPU  
speed, internal/external frequencies and memory size.  
Supports Intel pre-boot execution environment (PXE) for boot from LAN  
Remote Console: setup console redirection to serial ports (terminal  
mode) with CMOS setup access  
·
·
Note: Due to the BIOS segment limitation, enable the remote console  
function may occupy the same memory space for other  
ROM-mapping add-on or boot-up devices such like Pre-boot  
Agent of Ethernet Boot ROM, SCSI Boot ROM or add-on EIDE  
Boot ROM. It is recommended to enable only one ROM-mapping  
add-on or boot-up device when enable the remote console  
function.  
Host Memory  
·
Two 144-pin SO-DIMM sockets, Max. 512MB PC-100 un-buffered  
SDRAM  
·
Pre-installed 64MB PC-100 SD-RAM on SO-DIMM socket  
IDE Ports  
·
Bus Master IDE controller supports two EIDE interfaces by DB-6760J3  
(40-pin) and onboard 44 pin IDE connector for up to four IDE devices,  
including HDD and ATAPI CD-ROM drives. 44-pin secondary EIDE  
connector supports on-board 2.5” notebook size HDD or Flash2000TM  
flash disk.  
·
One CompactFlash type-II socket on removable daughter board for front  
CPU module.  
Note: CompactFlash daughter board (DB-6760CF) occupies the same  
space of 2.5” ATA HDD. cPCI-6760DK/P5 supports on-module  
one 2.5” ATA HDD or one CompactFlash socket, but not both.  
Introduction · 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On Board Super I/O  
·
·
Winbond W83977EF  
Supports high-speed bi-directional SPP/EPP/ECP parallel ports (DB-25  
connector) on front panel with ESD protection to 4KV and downstream  
device protection to 30V.  
·
·
One floppy interface by daughter board (DB-6760J3), support two floppy  
drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB.) 34-pin floppy  
connector is available on DB-6760J3.  
One 16C550 UARTs compatible RS-232 COM1 port with ESD protection  
to 2KV on front CPU module.  
USB Interface  
·
·
·
Supports one USB ports.  
USB Specification Rev. 1.1. compliant  
Individual over-current protection  
Watch-dog Timer  
·
Programmable I/O port 3F0h and 3F1h to configure watchdog timer,  
programmable timer 1~255 seconds or 1~255 minutes  
·
Bundled easy-programming library for DOS, Windows 95, 98, NT  
Hardware Monitoring  
·
Winbond W83782D, monitoring CPU temperature, CPU fan, system  
temperature and DC Voltages  
On-board VGA Display  
·
·
·
·
·
AGP 2x VGA controller SMI Lynx3DM SM721, with build-in 4M VRAM  
High performance, 128-bit, single clock cycle 2D drawing engine  
High performance, power managed 3D acceleration engine  
AGP 2x, ACPI, VESA DPMS and VESA DDC 2b compliant  
Supports up to 1280x1024 VGA display resolution with 24-bit true color,  
non-interlaced  
·
Supports up to 1600x1200 VGA display resolution with 16-bit high color  
at 60Hz refresh rate under WindowsNT(note)  
·
·
RAMDAC Latch-up protection  
Driver supporting: Windows95/98/ME/NT/2000, Linux, OS/2  
6 · Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The 1600x1200 VGA display resolution is a non-standard  
configuration. It needs special modified BIOS with drivers, which  
can ONLY be supported under Windows NT operating system.  
The BIOS may cause incompatible issues with other OS. The  
standard BIOS can support resolutions up to 1280x1024 under  
all operating systems listed above.  
On-board Ethernet supporting  
·
·
·
·
·
·
·
Two Ethernet ports featuring by two Intel 82559 Ethernet controller.  
IEEE 802.3 10Base-T and 100Base-TX compatible  
IEEE 802.3u Auto-negotiation support  
IEEE 802.3x 100Base-TX flow control support  
Full duplex support at both 10 and 100 Mbps operation  
Supports Intel pre-boot execution environment (PXE) for boot from LAN  
Supports Intel adapter teaming functions including Fault Tolenrence,  
Adaptive Load Balancing (ALB), Fast Ethernet Channel (FEC) and Link  
Aggregation.  
OS Compatibility  
MS-DOS 6.2+, Windows 95/98/ME, Windows NT 4.0, Windows 2000,  
Windows XP, Red Hat Linux 7.2 and VxWorks  
Flash Disk Supporting  
·
·
Pre-installed CompactFlash type-II socket by removable transition  
daughter board.  
On-board housing for Flash2000TM 2.5” flash disk on front CPU module  
·
PCI Bus Bridge  
·
·
Dual TI PCI2050 transparent PCI to PCI bridge  
Supports up to 14 PCI bus mastering devices on CompactPCI bus  
peripheral slots  
Front Panel LEDs and switch  
·
·
·
Power status (green)  
IDE activity indicator (red)  
Ethernet (integrated with RJ-45): 10/100Mb (amber), link and activity  
(green)  
·
·
Watchdog timer status indicator (amber)  
Flush tact switch for system reset  
Introduction · 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environment  
·
·
·
·
·
Operating temperature: 0 to 60°C (Note)  
Storage temperature: -20 to 80°C  
Humidity: 5% to 95% non-condensed  
Shock: 15G peak-to-peak, 11ms duration, non-operation  
Vibration:  
ü Non-operation: 1.88Grms, 5-500Hz, each axis  
ü Operation: 0.5Grms, 5-500Hz, each axis, with 2.5” HDD  
Note: 1. System forced cooling airflow with minimum 5 CFM is required  
for cPCI-6760DK/P5  
2. Due to environmental limitation differences from one  
component to another; please refer to the component  
specification when users wishes to mount a HDD on to the  
cPCI-6760DK. The operating temperature was tested with the  
HDD cabling outside the testing chamber, and with a Low  
Voltage Pentium-III 500MHz CPU.  
3. The vibration limitation of operation is caused by the 2.5” ATA  
HDD. If users wish to deploy the cPCI-6760DK/P5 into a high  
vibrating environment, we suggest users to adopt Flash2000  
Flash Disk (FFD series) or CompactFlash Card to replace the  
2.5” ATA HDD.  
Safety Certificate and Test  
·
·
CE, FCC Class B  
HALT (temperature and vibration stress)  
Power Consumption  
Configurations  
+5V  
+3.3V  
+12V  
-12V  
Low Power Pentium III 500MHz,  
256MB with cPCI-R6760D  
2.75A 3.5A 157mA 0mA  
Note: The above values are the measured power consumption for SBC  
with CPU and RAM only; the CPU is running at 100% loading with  
HCT, Kpower and burn-in test programs under Windows 2000  
Professional. The powers for all the other peripheral devices  
such as add-on cards, HDD, or CD-ROM are not included.  
8 · Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4.2 Peripheral Connectivity for cPCI-6760DK/P5  
Peripheral Connectivity for cPCI-6760DK/P5  
Front (cPCI-6760DK/P5)  
I/O  
Faceplate  
Y (DB-9)  
Y (DB-25)  
Y (PS/2)  
---  
Board  
---  
---  
---  
Serial Port (COM1)  
Parallel Port (via DB-6760J3)  
PS/2 Keyboard and Mouse  
Floppy (via DB-6760J3)  
Ultra DMA 33 Primary EIDE  
(Via DB-6760J3)  
Y (34-pin)  
---  
Y (40-pin)  
Ultra DMA 33 Secondary EIDE  
USB A  
10/100Mb Ethernet Port 1  
10/100Mb Ethernet Port 2  
VGA  
---  
Y
Y (44-pin)  
---  
---  
---  
---  
---  
---  
Y (RJ-45)  
Y (RJ-45)  
Y (DB-15)  
Y
LEDs  
Reset button  
Y
CompactFlash (via daughter  
board)  
---  
Y (CF-II)  
Table 2: Peripheral Connectivity for cPCI-6760DK  
Introduction · 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.5 Functional Block Diagram  
Low Power  
Mobile CPU  
Host Bus 100MHZ  
SO-DIMM  
440 BX  
PIIX4E  
SMI721  
AGP BUS  
66MHZ  
Memory BUS  
100MHZ  
P
M
C
PCI Bus 33MHZ  
I
D
E
INTEL  
82559  
BRIDGE  
PCI2050  
U
S
B
ISA Bus 16MHZ  
HWM  
W83782D  
BIOS  
Super I/O  
PRT  
MS  
KB  
COM  
FDD  
10 · Introduction  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.6 Mechanical outline drawing  
1.6.1 Outline drawing for cPCI-6760DK/P5 CPU board  
Introduction · 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Jumpers and Connectors  
This chapter provides information on how to use the jumpers and connectors  
on the cPCI-6760DK/P5 in order to set up a workable system. We also  
describe the meaning of each LED indicator. The topics covered are:  
·
Jumpers, Connectors and LED indicators on the cPCI-6760DK/P5  
12 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
·
Jumpers and connectors map of cPCI-6760DK/P5 series front board.  
TOP View  
Super I/O  
South Bridge  
PIIX4E 82371EB  
JP1  
8 2 3 7 1 E B  
P C I s e t  
J5  
J4  
e
l t n i  
BIOS  
44-pin  
Secondary  
EIDE (CN2)  
144Pin SO-DIMM  
144Pin SO-DIMM  
North Bridge 82443BX  
SMI VGA  
SM721  
i82559  
J2  
J1  
Low Power  
BGA2 CPU  
with Heatsink  
Jumpers and Connectors · 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
·
Connectors map of cPCI-6760DK/P5 ‘s daughter board (DB-6760J3).  
TOP View  
CN10  
FDD  
CN11  
IDE  
CN9  
LPT  
P3  
14 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
·
Jumpers and connectors map of cPCI-6760DK/P5 series front board.  
Bottom and Front Panel View  
CO  
M1  
COM1  
(CN1)  
P2P Bridge  
PCI2050  
Reserved for  
ECC RAM  
VG  
A
VGA  
(CN3)  
LPT  
(CN9)  
S1  
S3  
Keyboard and  
Mouse (CN4)  
KB/  
MS  
US  
B
USB (CN5)  
LAN1 (CN6)  
LAN2 (CN7)  
LA  
N1  
P2P Bridge  
PCI2050  
LA  
N2  
Reset &  
LEDs  
P
W
H
S
H
D
W
R
ST  
D
Jumpers and Connectors · 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1 Jumpers, Connectors and LED Indicators on the  
cPCI-6760DK/P5  
The jumpers on the cPCI-6760DK/P5 CPU board allow you to configure your  
CPU module according to the needs of your applications. If you have doubts  
about the best jumper configuration for your needs, contact your dealer or  
sales representative.  
The connectors on the cPCI-6760DK/P5 CPU board allows you to connect  
devices such as keyboard, mouse, VGA, COM port, Ethernet etc.  
The LED indicators on the cPCI-6760DK/P5 front board show you the  
information regarding to your system’s status.  
The following information lists the jumpers, connectors and LEDs on the  
cPCI-6760DK/P5 CPU board and their respective functions.  
Jumper Setting Information for cPCI-6760DK/P5 Front Board  
2.1.1  
JP1 on cPCI-6760DK/P5 ..........................................................17  
Connector Pin Assignments Information for cPCI-6760DK/P5  
2.1.2  
Keyboard and Mouse Combo Connector (CN4) on  
cPCI-6760DK/P5 ......................................................................17  
2.1.3  
2.1.4  
2.1.5  
2.1.6  
2.1.7  
2.1.8  
2.1.9  
Ethernet Connectors (CN6, 7) ..................................................18  
Serial Port COM1 Connector (CN1)..........................................18  
VGA Connector (CN3)..............................................................18  
USB (Port A) Connector (CN5).................................................18  
Secondary IDE Connectors (44-pin, CN2)...............................19  
Primary IDE Interface (40-pin, CN11).......................................20  
Parallel Port Connector on DB-6760J3 (CN9)..........................21  
2.1.10 FDD Interface (34-pin, CN10)...................................................21  
2.1.11 Ping header P3 Pin Assignments .............................................22  
2.1.11 CompactPCI J1 Pin Assignments.............................................23  
2.1.12 compactPCI J2 Pin Assignments..............................................24  
2.1.13 compactPCI J4 Pin Assignments..............................................25  
2.1.14 compactPCI J5 Pin Assignments..............................................26  
LED and Switch Setting Information for cPCI-6760DK/P5 Front Board  
2.1.15 LAN Port Indicators (Integrated in LAN1 (CN6) and LAN2  
(CN7))  
..................................................................................27  
2.1.16 IDE Activity LED Indication.......................................................28  
2.1.17 Power LED Indication ...............................................................28  
2.1.18 WDT LED Indication.................................................................28  
16 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note There are no jumper settings for front side bus (FSB) and CPU  
speed selection because the cPCI-6760DK/P5 is equipped with  
a pre-soldered BGA2 CPU that is mounted during SMT  
manufacturing.  
2.1.1 JP1 on cPCI-6760DK/P5  
JP1  
Setting  
Function  
Pin 1-2  
Short/Closed  
Clear CMOS  
Content  
1
1
3
3
Pin 2-3  
Short/Closed  
Normal Operation  
(Default)  
Table 3: JP1 Clear CMOS content  
2.1.2 Keyboard and Mouse Combo Connector (CN4) on the  
cPCI-6760DK/P5  
Pin #  
Signal  
KBDATA  
MSDATA  
GND  
Function  
1
2
3
4
5
6
Keyboard Data  
Mouse Data  
Ground  
+5V  
Power  
KBCLK  
MSCLK  
Keyboard Clock  
Mouse Clock  
Table 4: Keyboard/Mouse Combo Connector (CN4) on cPCI-6760DK/P5 front board  
Note: User can use a Y-cable for connecting PS/2 keyboard and  
mouse on this connector. User also can directly connect a PS/2  
keyboard on this connector when mouse is not needed.  
Jumpers and Connectors · 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.3 Ethernet Connectors (CN6, 7)  
Pin #  
Signal Name  
TD+  
1
2
3
TD-  
RD+  
6
RD-  
Table 5: Ethernet Connector LAN1 (CN6) and LAN2 (CN7) on cPCI-6760DK/P5 front  
board  
2.1.4 Serial Port COM1 Connector (CN1)  
Pin #  
Signal Name  
DCD, Data carrier detect  
RXD, Receive data  
TXD, Transmit data  
DTR, Data terminal ready  
GND, ground  
1
2
3
4
5
6
7
8
9
6
1
5
DSR, Data set ready  
RTS, Request to send  
CTS, Clear to send  
RI, Ring indicator  
Table 6: Serial Port COM1 (CN1) on cPCI-6760DK/P5 front board  
2.1.5 VGA Connector (CN3)  
Signal Name  
Pin  
1
3
Pin  
2
4
Signal Name  
Green  
N.C.  
Red  
Blue  
15  
11  
5
1
GND  
GND  
+5V.  
N.C.  
HSYNC  
NC  
5
7
9
11  
13  
15  
6
8
10  
12  
14  
GND  
GND  
GND  
N.C.  
VSYNC  
Table 7: VGA Connector (CN3) on cPCI-6760DK/P5 front board  
2.1.6 USB (Port A) Connector (CN5)  
Pin #  
Signal Name  
1
2
3
4
Vcc  
USB-  
USB+  
Ground  
Pin 1  
Table 8: USB Connector (CN5) on cPCI-6760DK/P5 front board  
18 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.7 Secondary IDE Connectors (44-pin, CN2)  
Signal  
RESET-  
DD7  
Pin #  
Pin #  
Signal  
Ground  
DD8  
1
2
3
4
DD6  
5
6
DD9  
DD5  
7
8
DD10  
DD4  
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
42  
44  
DD11  
DD3  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
41  
43  
DD12  
DD2  
DD13  
DD1  
DD14  
DD0  
DD15  
Ground  
DMARQ  
DIOW-  
DIOR-  
IORDY  
DMACK-  
INTRQ  
DA1  
(keypin)  
Ground  
Ground  
Ground  
CSEL  
Ground  
reserved  
PDIAG-  
DA2  
DA0  
CS0-  
CS1-  
DASP-  
+5V  
Ground  
+5V  
Ground  
TYPE-  
Jumpers and Connectors · 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.8 Primary IDE Interface (40-pin, CN11)  
Signal  
RESET-  
DD7  
Pin #  
1
Pin #  
2
Signal  
Ground  
DD8  
3
4
DD6  
5
6
DD9  
DD5  
7
8
DD10  
DD11  
DD12  
DD13  
DD14  
DD15  
NC  
DD4  
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
DD3  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
35  
37  
39  
DD2  
DD1  
DD0  
Ground  
DMARQ  
DIOW-  
DIOR-  
IORDY  
DMACK-  
INTRQ  
DA1  
Ground  
Ground  
Ground  
CSEL  
Ground  
reserved  
PDIAG-  
DA2  
DA0  
CS0-  
CS1-  
DASP-  
Ground  
Table 9: Primary IDE channel (CN11) on DB-6760J3  
20 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.9 Parallel Port Connector on DB-6760J3 (CN9)  
Signal Name  
Line printer strobe  
PD0, parallel data 0  
PD1, parallel data 1  
PD2, parallel data 2  
PD3, parallel data 3  
PD4, parallel data 4  
PD5, parallel data 5  
PD6, parallel data 6  
PD7, parallel data 7  
ACK, acknowledge  
Busy  
Pin #  
1
Pin #  
14  
Signal Name  
AutoFeed  
Error  
13  
2
15  
3
16  
Initialize  
Select  
4
17  
5
18  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
N/A  
6
19  
7
20  
14  
1
8
21  
9
22  
10  
11  
12  
13  
23  
24  
Paper empty  
25  
Select  
N/A  
Table 10: Parallel Ports LPT1 (CN9) on DB-6760J3  
2.1.10 FDD Interface (34-pin, CN10)  
Signal  
Pin #  
Pin #  
Signal  
Ground  
Ground  
NC  
1
2
DRVDEN0  
NC  
3
4
5
6
DRVDEN1  
INDEX#  
MTR0#  
DS1#  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
Ground  
7
8
9
10  
12  
14  
16  
18  
20  
22  
24  
26  
28  
30  
32  
34  
11  
13  
15  
17  
19  
21  
23  
25  
27  
29  
31  
33  
DS0#  
MTR1#  
FDIR#  
STEP#  
WDATA#  
WGATE#  
TRACK0#  
WPT#  
RDATA#  
HDSEL#  
DSKCHG#  
Table 11: FDD Interface (CN3) on DB-6760J3  
Jumpers and Connectors · 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.11 Ping header P3 Pin Assignments  
Pin  
Z
A
B
C
D
E
F
GND PDRST# PDCS16# (1) PDIORDY Reserved PDIRQ14 GND  
19  
GND PDACT#  
Reserved  
PDD14  
PDD10  
PDA1  
PDD6  
PDD2  
PDCS3#  
PDD13  
PDD9  
+5V  
PDD5  
PDD1  
PDCS1# PPDIAG (1) GND  
18  
17  
16  
15  
14  
13  
GND  
GND  
GND  
GND  
GND  
PDD15  
PDD11  
PDA0  
PDD7  
PDD3  
PDD12  
PDD8  
PDA2  
PDD4  
PDD0  
Reserved GND  
PDDACK# GND  
PDDREQ GND  
PDIOW#  
PDIOR#  
GND  
GND  
GND  
GND  
GND WRTPRT#  
DS0#  
DS1#  
DRVDEN1  
DSKCHG  
HDSEL#  
MTR0#  
MTR1#  
FDIR#  
INDEX#  
DRVDEN0 RDATA#  
TRACK0#  
WDATA# GND  
12  
11  
10  
GND  
GND  
STEP#  
GND WGATE#  
ERRORP#  
SLCTIN#  
AUTOFD  
+5V(4)  
PBUSY  
Reserved GND  
9
8
GND  
PE  
PSTROB# Reserved GND  
GND  
GND  
PPD7  
PPD3  
PPD6  
PPD2  
PPD5  
PPD1  
PPD4  
PPD0  
PINIT3  
PACK#  
GND  
GND  
7
6
GND Reserved MSDATA(1) PCBEEP(1) KBDATA(1)  
SLCT  
RXD1(1)  
TXD1(1)  
TDN2(1)  
TDP2(1)  
E
GND  
GND  
GND  
GND  
GND  
F
5
4
GND Reserved  
GND CTS1#(1)  
MSCLK(1)  
RTS1#(1)  
TDN1(1)  
RDN2(1)  
B
+5V  
DSR1#(1)  
RI1#(1)  
RDP1(1)  
C
KBCLK(1)  
DCD1#(1)  
DTR1#(1)  
RDN1(1)  
D
3
GND  
GND  
Z
TDP1(1)  
RDP2(1)  
A
2
1
Pin  
Table 12: Ping header P3 pin assignments on cPCI-6760DK and DB-6760J3  
Note:  
(1)  
These signals are used by the CPU board (J3) but not used in  
the DB-6760J3 (P3)  
22 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.11 CompactPCI J1 Pin Assignments  
Pin  
Z
A
B
REQ64# (2)  
+5V  
C
D
E
F
GND  
GND  
GND  
GND  
GND  
GND  
GND  
+5V  
ENUM# (2)  
V(I/O) (1)  
S1AD[3]  
+3.3V  
+3.3V  
S1AD[0]  
+5V  
+5V  
GND  
25  
24  
23  
22  
21  
20  
19  
18  
17  
16  
15  
12-14  
11  
10  
9
S1AD[1]  
+3.3V  
ACK64# GND  
S1AD[2] GND  
S1AD[4]  
GND  
S1AD[7]  
+3.3V  
S1AD[6]  
M66EN(6) S1C/BE[0]# GND  
AD[5]  
GND  
S1AD[9]  
GND  
S1AD[8]  
V(I/O) (1)  
S1AD[14]  
+3.3V  
S1AD[12]  
+3.3V  
S1AD[11] S1AD[10] GND  
S1AD[15]  
GND  
IPMB_SCL(1) IPMB_SDA(1)  
GND  
S1PAR S1C/BE[1]# GND  
GND S1PERR# GND  
S1AD[13] GND  
GND S1SERR#  
GND +3.3V  
GND S1DEVSEL#  
GND  
V(I/O) (1)  
S1STOP# S1LOCK# GND  
BDSEL(7) S1TRDY# GND  
GND  
+3.3V  
S1FRAME#  
S1IRDY#  
Key  
GND  
GND  
S1AD[18]  
S1AD[21]  
S1AD[17]  
GND  
IDSEL(8)  
S1AD[16]  
+3.3V  
GND  
S1C/BE[2]# GND  
S1AD[20] S1AD[19] GND  
GND S1C/BE[3]#  
S1AD[23]  
V(I/O) (1)  
S1AD[28]  
+3.3V  
GND  
AD[25]  
GND  
S1AD[22] GND  
S1AD[24] GND  
S1AD[27] GND  
S1AD[31] GND  
S1GNT# GND  
GND  
GND  
GND  
S1AD[26]  
S1AD[30]  
REQ#  
GND  
8
S1AD[29]  
GND  
7
S1CLK  
GND  
INTP (1)  
6
GND Reserved (1) Reserved (1) S1PCIRST#  
GND IPMB_PWR (1) HEALTHY# (1)  
5
V(I/O) (1)  
INTS  
INTD#  
TDI (2)  
+5V  
GND  
GND  
GND  
GND  
4
GND  
GND  
GND  
INTA#  
TCK (2)  
+5V  
INTB#  
+5V  
INTC#  
TMS (2)  
TRST# (2)  
+5V  
3
TDO (1)  
+12V  
2
-12V  
1
Pin  
Z
A
B
C
D
E
F
Table 13: CompactPCI J1 pin assignments  
Jumpers and Connectors · 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.12 CompactPCI J2 Pin Assignments  
Pin  
Z
A
B
C
D
E
F
22 GND  
21 GND  
20 GND  
19 GND  
GA4# (1)  
S1CLK6  
S1CLK5  
GND  
GA3# (1)  
GA2# (1)  
Reserved  
Reserved  
Reserved  
Reserved  
PRST#  
GA1# (1)  
Reserved  
GND  
GA0# (1) GND  
Reserved GND  
Reserved GND  
Reserved GND  
Reserved GND  
S1GNT6# GND  
Reserved GND  
S1GNT5# GND  
Reserved GND  
Reserved GND  
Reserved GND  
Reserved GND  
GND  
GND  
GND  
Reserved  
GND  
18 GND Reserved  
17 GND Reserved  
16 GND Reserved  
15 GND Reserved  
14 GND Reserved  
13 GND Reserved  
12 GND Reserved  
11 GND Reserved  
10 GND Reserved  
9
8
7
6
5
Reserved  
GND  
S1REQ6#  
GND  
Reserved  
GND  
DEG# (2)  
FAL# (2)  
S1REQ5#  
GND  
Reserved  
GND  
Reserved  
V(I/O) (1)  
Reserved (  
V(I/O) (1)  
Reserved  
GND  
Reserved  
GND  
Reserved  
Reserved  
GND  
Reserved  
GND  
Reserved  
Reserved  
Reserved  
V(I/O) (1)  
Reserved  
V(I/O) (1)  
Reserved  
V(I/O) (1)  
GND  
Reserved  
GND  
Reserved  
GND  
Reserved GND  
Reserved GND  
Reserved GND  
Reserved GND  
Reserved GND  
Reserved GND  
GND Reserved  
GND Reserved  
GND Reserved  
GND Reserved  
GND Reserved  
Reserved  
4
GND  
V(I/O) (1)  
Reserved  
Reserved  
S1GNT3#  
GND  
Reserved GND  
3
2
1
GND  
GND  
GND  
S1CLK4  
S1CLK2  
S1CLK1  
GND  
S1CLK3  
GND  
S1REQ#4  
S1GNT4# GND  
S1REQ3# GND  
S1REQ2# GND  
SYSEN# (2) S1GNT2#  
S1REQ1#  
S1GNT1#  
Pin  
Z
A
B
C
D
E
F
Table 14: CompactPCI J2 Pin Assignments  
24 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.13 CompactPCI J4 Pin Assignments  
Pin  
Z
A
B
C
D
E
F
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
+5V(4)  
S2AD[1]  
+3.3V(4)  
S2AD[7]  
+3.3V(4)  
S2AD[12]  
+3.3V(4)  
S2SERR#  
+3.3V(4)  
+3.3V(4)  
S2AD[0]  
+5V(4)  
+5V(4)  
GND  
GND  
GND  
GND  
REQ64# (2)  
ENUM# (2)  
Reserved  
S2AD[3]  
+3.3V(4)  
25  
24  
23  
22  
21  
20  
19  
18  
17  
16  
15  
+5V(4)  
S2AD[4]  
GND  
S2AD[9]  
GND  
ACK64#  
S2AD[2]  
S2AD[5]  
S2AD[6]  
S2AD[8]  
Reserved  
S2AD[14]  
+3.3V(4)  
M66EN(4) S2C/BE[0]# GND  
S2AD[11]  
GND  
S2PAR  
GND  
S2STOP#  
GND  
S2AD[10] GND  
S2AD[13] GND  
S2C/BE[1]# GND  
S2PERR# GND  
S2LOCK# GND  
S2TRDY# GND  
S2AD[15]  
GND  
IPMB_SCL(1) IPMB_SDA (1)  
GND S2DEVSEL#  
GND  
GND  
S2FRAME#  
Reserved  
S2IRDY#  
+3.3V(4)  
KEY  
12-14  
GND  
GND  
GND S2C/BE[3]#  
GND  
GND  
GND  
GND  
S2AD[18]  
S2AD[21]  
S2AD[17]  
GND  
GND  
GND  
S2AD[29]  
GND  
S2AD[16]  
+3.3V(4)  
S2AD[23]  
Reserved  
S2AD[28]  
+3.3V(4)  
GND  
S2AD[20]  
GND  
AD[25]  
GND  
S2C/BE[2]# GND  
S2AD[19] GND  
S2AD[22] GND  
11  
10  
9
8
7
S2AD[26]  
S2AD[30]  
S2REQ0#  
Reserved  
AD[24]  
GND  
S2AD[27] GND  
S2AD[31] GND  
S2GNT0# GND  
S2CLK  
GND  
6
5
Reserved  
S2PCIRST#  
GND IPMB_PWR (1) HEALTHY#(1) Reserved  
INTP(1)  
+5V(4)  
TDO (1)  
Reserved  
D
INTS  
INTD#  
TDI (2)  
+5V(4)  
E
GND  
GND  
GND  
GND  
F
4
3
GND  
GND  
GND  
Z
INTA#  
TCK (2)  
+5V(4)  
A
INTB#  
+5V(4)  
Reserved  
B
INTC#  
TMS (2)  
TRST# (2)  
C
2
1
Pin  
Table 15: ComapctPCI J4 pin assignments  
Jumpers and Connectors · 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.14 CompactPCI J5 Pin Assignments  
Pin  
22  
Z
A
B
C
D
E
F
GND  
GND  
Reserved  
S2PCLK6  
Reserved  
GND  
Reserved  
LANLED2  
Reserved  
Reserved  
Reserved  
Reserved  
GND  
GND  
21  
GND  
GND  
S2PCLK5  
GND  
GND  
GND  
SDD7  
SDD9  
GND  
SDD6  
SIDERST# GND  
20  
19  
SDD8  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
GND  
SDD4  
SDD12  
SDD3  
SDD11  
GND  
SDD10  
GND  
S2REQ6#  
GND  
SDD5  
18  
17  
16  
15  
Reserved  
Reserved  
Reserved  
S2GNT6#  
SDD2  
SDD13  
GND  
SDD1  
S2REQ5#  
S2GNT5#  
SDDREQ  
SDD14  
GND  
SDCS16#  
GND  
SDD0  
GND  
SDIOW#  
GND  
SDA2  
GND  
SDD15  
SDIOR#  
SDIRQ15  
SDA1  
GND  
GND  
GND  
GND  
GND  
14  
13  
12  
11  
10  
GND SDIORDY  
Reserved  
SDDACK#  
Reserved  
SDCS3#  
GND  
GND  
GND  
SPDIAG  
SDA0  
GREEN  
SDACT#  
SDCS1#  
GND  
GND  
GND  
GND  
GND  
GND  
HSYNC  
DDCCLK  
OCJ1  
GND  
DDCDAT  
GND  
Reserved  
SPDLED2  
Reserved  
DTR2#  
RED  
GND  
BLUE  
GND  
GND  
9
8
7
6
5
4
VSYNC  
LANLED1  
GND  
SPDLED1 GND  
USBP1M  
DCD2#  
USBP1P  
GND  
RXD2  
RI2#  
GND  
GND  
GND  
Reserved  
RTS2#  
TXD2  
Reserved  
CTS2#  
GND  
DSR2#  
GND  
GND  
GND  
S2CLK4  
S2CLK2  
S2CLK1  
GND  
S2CLK3  
GND  
S2GNT3#  
Reserved  
S2REQ1#  
S2REQ4#  
S2GNT2#  
S2GNT1#  
S2GNT4#  
S2REQ3#  
S2REQ2#  
GND  
GND  
GND  
3
2
1
Pin  
Z
A
B
C
D
E
F
Table 16: CompactPCI J5 pin assignments  
Note:  
(1) These signals are not connected.  
(2) These signals are pulled high on board.  
(3) These signals are pulled low on board.  
(4) These power pins are used for rear transition board used.  
26 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(5) ENUM# is connected to a BIOS programmable circuitry then  
connected to IRQ 3 or IRQ 9 according to the hardware configuration.  
There is a BIOS setting to Enable/Disable this ENUM# function. The  
default BIOS setting is Disabled and the factory default hardware  
configuration is IRQ 9. To support PICMG 2.1 Hot Swap for  
peripheral boards, backplane should bus all peripheral slots ENUM#  
together to system slot. And customer should enable ENUM#  
function in cPCI-6760DK/P5 BIOS setting. (When R283 and R284  
are installed with 0-ohm resistors, ENUM# is routed through IRQ9. If  
R283, R284 are removed and R281 and R282 are installed with  
0-ohm resistors, ENUM# is routed through IRQ3.)  
(6) M66EN is tied to ground. PCI bus just can run in 33MHz.  
(7) In backplane, BDSEL must tie to ground to enable “self-hot-swap”  
controller.  
(8) IDSEL are tied to ground.  
2.1.15 LAN Port Indicators (Integrated in LAN1 (CN6) and LAN2  
(CN7))  
Green LED  
Amber LED  
Amber LED  
Description  
10/100Mbps Status  
OFF  
ON  
10Mbps transfer rate  
100Mbps transfer rate  
Table 17: Amber LED indication in LAN port  
Green LED  
Link/Activity Status  
OFF  
Description  
No link  
ON  
Connecting  
Blinking  
Active/Data transfering  
Table 18: Green LED indication in LAN port  
Jumpers and Connectors · 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.16 IDE Activity LED Indication  
Power LED  
IDE Activity  
Reset Button  
WDT Status  
Indication  
Description  
Red LED  
OFF  
EIDE is not active  
ON  
Any one EIDE device is active  
Table 19: IDE Activity LED indication  
2.1.17 Power LED Indication  
Description  
Green LED  
OFF  
System is not power-on or power failed  
System is power-on  
ON  
Table 20: Power LED indication  
2.1.18 WDT LED Indication  
Description  
WDT is not enable  
WDT is enable  
Amber LED  
OFF  
Blinking  
Table 21: WDT LED indication  
28 · Jumpers and Connectors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Getting Started  
This chapter provides information on how to install necessary components  
on the cPCI-6760DK/P5 in order to set up a workable system. The topics  
covered are:  
·
·
·
·
·
·
CPU Installation  
Memory Installation  
CF Installation  
HDD Installation  
Device Connection for OS Installation  
Notice for Rear I/O Connection  
Getting Started · 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.1 CPU Installation  
The cPCI-6760DK/P5 CPU module supports an Intel BGA2 Low Power  
Pentium-III processor at 500MHz with a 100 MHz front side bus (FSB)  
frequency.  
The CPU on the cPCI-6760DK/P5 series products is soldered on the PCB  
(printed circuit board) in the factory. Users do not need to install any CPU  
beforehand to get the system started. The heatsink is also pre-mounted in  
the factory. We do not suggest users try to remove the heatsink or CPU. It  
may cause an un-recoverable system error and the warranty will be void.  
M
Please do not try to replace the CPU in the field or remove the  
heatsink. It will cause board defects and the warranty will be void.  
3.2 Memory Installation  
The cPCI-6760DK/P5 CPU module supports two PC-100 144-pin SO-DIMM  
sockets for a maximum total memory of 512MB with optional ECC support.  
The memory type must be 3.3V SDRAM. The memory module can come in  
sizes of 32MB, 64MB, 128MB or 256MB PC-100 144-pin SO-DIMM. The  
256MB SO-DIMM should be constructed of 16Mx8 SDRAM chips.  
The cPCI-6760DK/P5 is delivered with pre-installed 64MB PC-100 144-pin  
SO-DIMM. ADLINK’s factory also provides pre-mounting memory service of  
other memory size for volume orders of OEM project on request. Please  
contact your dealer or ADLINK’s sales representatives.  
Note: Ensure that the RAM modules are firmly seated in the SO-DIMM  
sockets and that it is not over the height limitation, otherwise the  
components maybe damaged when the SBC is inserted into the  
chassis.  
30 · Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3 CF Installation  
The CompactFlash Card (or called CF storage card) is widely applied in  
digital consumer devices like PDA, Digital Camera and MP3 player.  
Because of the CF anti-shock, anti-vibration, better environment tolerance,  
low power consumption, small form factor and high reliability, it has been  
widely accepted in mission critical embedded applications.  
With the cPCI-6760DK/P5, the CF card is very easy to use; the CF card  
socket is available on the DB-6760CF, which is a removable daughter board  
that can be attached to the cPCI-6760DK/P5 by directly connecting the  
daughter board to the on-board 44-pin IDE (CN2) connector. The  
DB-6760CF is designed in exchange with the 2.5” ATA HDD on the IDE  
interface. The DB-6760CF supports both type-I and type-II CompactFlash  
storage device such as CF cards or IBM MicroDrive.  
If user purchases the OEM model, non-standard, customized or special  
configuration model, it may not come with the DB-6760CF in the package.  
Users can purchase the CF card adaptor (by the model name: DB-6760CF)  
as an optional kit to convert the IDE interface into a CF card socket. Since  
the CF card adaptor utilizes the same IDE interface and the same space that  
a 2.5” ATA HDD may occupy, users should remove then 2.5” ATA HDD (if  
any) first before installing the CF card adaptor. Please refer to the section of  
HDD installation for instructions on removing the 2.5” ATA HDD.  
Note: To prevent the CF card from come loose during heavy vibrations,  
there is a screw designed and located on the upper side of CF  
card. (Please refer to the figure in section 3.3.1.). Remove the  
protection screw before inserting or extracting the CF card. After  
inserting or extracting the CF card, please mount and fix this  
protection screw.  
Getting Started · 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3.1 DB-6760CF Outline, Jumper and Connectors  
Please remove this protection  
screw before inserting or extracting  
the CF card.  
CF Card  
Ejector  
CompactFlash  
Socket  
JP1  
Master/Slave  
1
M/S Selection  
JP1  
3
2
1
Master  
(Default)  
Pin 2 & 3 Short  
3
2
1
Slave  
Jumper Open  
Table 22: JP1 DB-6760CF Master/Slave Setting  
32 · Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3.2 DB-6760CF Installation for cPCI-6760DK/P5 and CF card  
notice  
·
Mount the DB-6760CF on the cPCI-6760DK/P5’s IDE connector (CN2).  
Please be aware that pin 1 on the DB-6760CF should be aligned with  
pin 1 of CN2 on the cPCI-6760DK/P5.  
·
Fix the DB-6760CF & cPCI-6760DK/P5 by screwing three hexagonal  
pillars between them. Leave the hole in front of the CF socket  
unscrewed.  
·
·
Set the CF card as master or slave upon application requirements.  
Insert a CF card into its socket, and then check to see if the CF card is  
probably seated  
·
Mount the third screw on the upper side of the CF card to prevent the CF  
card from coming loose during heavy vibration.  
Note: The CF card on the CPU board utilize the Secondary EIDE  
interface (IDE2), which is also wired to the CompactPCI  
connector J5. Users need to pay attention to the master/slave  
setting to avoid conflicts between devices. The default jumper  
setting on the DB-6760CF is set to master.  
3.3.3 Removing the DB-6760CF from the cPCI-6760DK/P5  
·
Remove the upper screw, which prevents the CF card from coming  
loose  
·
·
·
Remove the CF card by pushing the ejector level  
Remove all screws & hexagonal pillars on the DB-6760CF  
Remove the DB-6760CF carefully from the 44-pin IDE connector (CN2)  
of the cPCI-6760DK/P5  
Getting Started · 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4 HDD Installation  
With the cPCI-6760DK/P5, users can install one 2.5” ATA HDD or one flash  
drive (e.g. FLASH2000 flash disk, FFD). The factory default model is  
equipped with a DB-6760CF; the removable CF card is not included. If users  
wish to install a 2.5” ATA HDD for larger storage capacity or want to install a  
FFD, user can purchase off-the-shelf 2.5” ATA HDD or FFD from the market.  
However, we recommend only products, which are approved by ADLINK to  
ensure optimum system stability. Due to space limitation and ventilation  
concerns, the SBC is only allowed to use low profile (or called slim type) 2.5”  
ATA HDD or FFD with a thickness of no more than 9.5mm. Since the CF  
card adaptor (DB-6760CF) utilizes the same IDE interface and the same  
housing that a 2.5” ATA HDD uses, users should remove the CF card  
adaptor (if any) first before installing a 2.5” ATA HDD or FFD. Please refer to  
the section on “CF installation” for the instruction on removing the CF card  
adaptor.  
3.4.1 HDD/FFD Installation for cPCI-6760DK/P5  
·
Find the HDD accessory pack inside your original package. (If user  
purchases the OEM model, non-standard, customized or special  
configuration model, it may not come with the HDD accessory pack.  
Please contact ADLINK dealers or sales representatives to purchase  
this accessory pack P/N: 58-00023-000.)  
·
Remove the DB-6760CF if it exist, please refer to the section “CF  
Installation”  
·
·
Check the master/slave setting of your 2.5” ATA HDD.  
Screw four copper hexagonal stand-offs on the bottom side of the 2.5”  
ATA HDD.  
·
·
Mount the HDD by using four M3 screws from the bottom side of the  
cPCI-6760DK/P5’s.  
Connect the HDD and cPCI-6760DK/P5 (CN2) using the ribbon cable,  
which comes with the HDD accessory pack.  
·
·
Check pin1 of the IDE connector, ribbon cable and HDD are all matched.  
Reconfirm the ribbon cable, HDD and HDD supporting stand-off are all  
well fixed & connected.  
Note: The 2.5" ATA HDD on the front board utilizes the Secondary  
EIDE interface (IDE2), which is also wired to the CompactPCI  
connector J5. Users need to pay attention to the master/slave  
setting to avoid conflicts between devices.  
34 · Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.4.2 Removing HDD/FFD from cPCI-6760DK/P5  
·
·
·
Remove the four screws from the bottom side that mounts on the copper  
stand-offs.  
Remove the 44-pin ribbon cable from CN2 of the cPCI-6760DK/P5 and  
remove the cable from the HDD.  
Remove the copper stand-offs from the HDD.  
3.5 Device Connection for OS Installation  
This section describes how to get started with installation of an OS on to the  
cPCI-6760DK/P5 CPU module. The easiest way to install an OS is by  
connecting an ATAPI CD-ROM.  
3.5.1 Using the cPCI-6760DK/P5 with ADLINK’s cBP-6108 and  
6515 series backplane  
Since the cBP-6108 and 6515 series backplane have direct IDE connection  
from J3/P3 and J5/P5 on the rear I/O interface, and the pin assignments are  
compatible with that of the cPCI-6760DK/P5 series product. Users can  
easily connect a 40-pin ribbon cable into the IDE interface on the rear side of  
backplane. Then connect the other end of the cable into an ATAPI CD-ROM.  
Because the primary IDE interface is wired to J3 and then goes to be used by  
the DB-6760J3 daughter board, users can only connect an IDE cable on the  
secondary IDE interface on the backplane. If users have installed a 2.5” ATA  
HDD or CF card on the front board, it is recommend that the master/slave  
setting on CD-ROM be adjusted to prevent any conflicts.  
3.5.2 Using the cPCI-6760DK/P5 on other backplanes  
For backplanes, which are not compatible with the pin assignments of J5/P5  
IDE interface of the cPCI-6760DK/P5, users can connect a 40-pin ribbon  
cable onto the Secondary IDE interface on the cPCI-R6760D or  
cPCI-R6760S rear board and then connect the other end of the ribbon cable  
onto the ATAPI CD-ROM. If users have installed a 2.5” ATA HDD or a CF  
card on the front board, it is recommended that the master/slave setting on  
the CD-ROM be adjusted to prevent any conflicts.  
Getting Started · 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.6 Notice for Rear I/O Connection  
The cPCI-6760DK/P5 features fully integrated functionalities with AGP-VGA  
display, Ethernet ports, 2S1P, USB, UDMA-33 IDE and Ultra-160 SCSI.  
Some of these are implemented for rear I/O only, while some are  
implemented to support both front and rear I/O. This section describes the  
important notes about using the rear I/O connection.  
3.6.1 The I/O implementation is only supported by rear I/O board  
Several I/Os are only supported by the rear I/O including COM2, USB2,  
LAN3, LAN4 and SCSI. User could apply the cPCI-R6760S rear I/O board to  
obtain all the rear I/O mentioned above. If the cPCI-R6760D rear I/O board is  
applied then there is no LAN3, LAN4 or SCSI available. However, using the  
cPCI-R6760S will occupy 3 pairs of PCI bus mastering circuitry on the upper  
cPCI bus (the secondary cPCI bus).  
M Please use the proper rear I/O transition module to enable the  
functions (I/O interfaces) on rear side. The board or system maybe  
damaged if the incorrect rear I/O transition module is used.  
3.6.2 The I/O implementation is supported by both rear I/O and  
front I/O  
Several I/Os were originally designed to support rear and front I/O’s including  
keyboard, mouse, VGA display and Ethernet connections, but now since the  
cPCI-6760DK/P5 also uses the DB-6760J3, it re-directs some of the rear I/O  
signal to front board, therefore, there is no signal output available on the rear  
I/O for keyboard, mouse and Ethernet. Users may apply the cPCI-R6760D  
or cPCI-R6760S on the system, but only the VGA display is available on rear  
panel.  
M
Please use the proper rear I/O transition module to enable the  
functions (I/O interfaces) on rear side. The board or system maybe  
damaged, if the improper rear I/O transition module is used.  
M
Please connect device either on the front or rear I/O for one I/O  
function only. DO NOT connect devices of the I/O function front and  
rear panel at the same time. It may cause damages to the I/O ports or  
the system module and the warranty will be void.  
36 · Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.6.3 LAN1, LAN2 Front and Rear I/O Connecting Selection  
There are two DIPswitches on the solder side of the cPCI-6760DK/P5.  
Those switches were originally designed to supports dual Ethernet  
connection both on the front and rear I/O’s on the cPCI-6760D, however; with  
the cPCI-6760DK/P5, it uses the DB-6760J3 to re-direct the rear I/O signals  
on J3 to the front, therefore there is no LAN1 or LAN2 Ethernet available on  
rear I/O. Please keep these switches set as factory default to enable  
Ethernet functionalities on the cPCI-6760DK/P5.  
S1, S2: LAN1 Connecting Selection  
LAN 1  
Switch S1  
Switch S2  
Connecting  
Pin#  
State  
Pin#  
State  
S1-1  
S1-2  
ON  
S2-1  
S2-2  
OFF  
ON  
ON  
ON  
OFF  
OFF  
OFF  
Front I/O  
Enable  
S1-3  
S1-4  
S2-3  
S2-4  
Table 23: LAN1 Connecting Selection  
S3, S4: LAN2 Connecting Selection  
LAN 2  
Switch S3  
Switch S4  
Connecting  
Pin#  
State  
Pin#  
State  
S3-1  
S3-2  
S3-3  
S3-4  
ON  
S4-1  
OFF  
ON  
ON  
ON  
S4-2  
S4-3  
S4-4  
OFF  
OFF  
OFF  
Front I/O  
Enable  
Table 24: LAN2 Connecting Selection  
M
DO NOT set S1 and S2 to “ON” or S3 and S4 to “ON” at the  
same time. It may cause Ethernet malfunction or damage the  
board or devices.  
Getting Started · 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Driver Installation  
To install the drivers and utility for the cPCI-6760DK/P5, please refer the  
installation information in this Chapter. We provide basic information in this  
manual, however, for more detail installation information, such as  
non-Windows OS installation, please refer to the extensive explanation  
inside the ADLINK CD. We put the chip drivers in the following directories:  
Chipset driver  
\CHIPDRV\Chipset\440BX  
\CHIPDRV\VGA\SM721  
\CHIPDRV\LAN\100PDISK  
\CHIPDRV\WDT  
VGA/AGP relative driver  
LAN relative driver  
Watchdog relative library  
Hardware Doctor Utility  
\Utility\HWDoctor\W8378X  
In this users manual, the Bus-mastering IDE driver installation is not  
described because most of the Windows based OS will install those drivers  
automatically.  
Since Windows NT is a non plug-and-play OS, some useful tips for installing  
Windows NT drivers are suggested:  
1. Install the LAN driver before installing any service pack.  
2. Install the VGA/AGP driver after installing the service pack. Please  
make sure your service pack does support AGP, service pack 6 or  
higher is recommend.  
3. If Windows NT boots with a warning message, check the Event  
Viewer to view the source generating the warning message. If  
strange phenomena’s occur and it can’t be solved, re-install the  
Windows NT service pack, then install the drivers in a different  
sequence.  
38 · Driver Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1 VGA Drivers Installation  
This section describes the VGA driver installation for the onboard VGA  
controller  
X:\CHIPDRV\VGA\SM721 directory of the ADLINK CD: where X: is the  
location of the CD-ROM drive. The VGA drivers for Windows 98/95,  
SM721.  
The  
relative  
drivers  
are  
located  
in  
Windows NT and Windows 2000 are also included.  
4.1.1 Driver Installation on Windows 2000  
Windows 2000 may install the standard VGA driver. We recommend you to  
manually installed the most updated driver, which is shipped with the  
ADLINK CD to guarantee compatibility. After installing Windows 2000,  
update to the new driver by following these procedures.  
1. Boot Windows 2000, Click Start. Select Settings then double-click  
the Control Panel.  
2. Double-click on the System icon, click Hardware tab, click Device  
Manager button.  
3. Double-click either on the Display Adapters or Other Devices entry,  
Double-click Video Controller or Silicon Motion Lynx3DM entry.  
4. Click on the Driver tab, then click Update Driver… button.  
5. An Upgrade Device Driver Wizard windows will appear, click NEXT>.  
6. Select Display a list of ... and click NEXT.  
7. The next window will show a list of hardware types, select Display  
Adapters, then click OK.  
8. This window will show a list of VGA model numbers.  
9. Insert ADLINK CD and click Have Disk.  
10. Browse  
the  
SM721  
driver  
in  
the  
following  
path:  
X:\CHIPDRV\VGA\SM721\WIN2K, highlight smisetup.inf, click  
OPEN, then click NEXT>.  
11. Highlight the model: Silicon Motion Lynx3DM, then click NEXT>.  
Driver Installation · 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12. Click the NEXT> button again; Windows 2000 may report a Digital  
Signature Not Found. Click Yes to continue.  
13. Click Finish button, then click CLOSE button.  
4.1.2 Driver Installation on Windows 98  
Windows 98 may install the standard VGA driver. We recommend you to  
manually installed the most updated driver, which is shipped with the  
ADLINK CD to guarantee compatibility. After installing Windows 98, please  
update to the new driver by following these procedures.  
1. Boot Windows 98, Click Start. Select Settings then double-click the  
Control Panel.  
2. Double-click System icon, click on the Device Manager tab.  
3. Double-click Display Adapters entry,select the Standard PCI  
Graphics Adapter (VGA) entry. Click the Properties button.  
4. Click on the Driver button, then click Update Driver… button.  
5. An Upgrade Device Driver Wizard window will appear, click NEXT>.  
6. Select Display a list of ... and click NEXT>. The next window allows  
the user to specify a specific path. Insert the ADLINK CD and click  
Have Disk.  
7. Browse  
the  
SM721  
driver  
in  
the  
following  
path:  
X:\CHIPDRV\VGA\SM721\WIN9XME, highlight smi.inf, and click  
OPEN. Click OK.  
8. Click the NEXT> button and a Wizard summary window will appear.  
9. Click the Finish button, then restart the computer to activate the new  
driver.  
40 · Driver Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.1.3 Driver Installation on Windows NT  
Windows NT may install the standard VGA driver. We recommend you to  
manually installed the most updated driver, which is shipped with the  
ADLINK CD to guarantee compatibility. After installing Windows NT, please  
update to the new driver by following these procedures.  
1. From the Control Panel, double-click the Display icon.  
2. Click the Settings tab, click Display Type…, click Change… button.  
3. Insert ADLINK CD and click Have Disk.  
4. Browse  
the  
SM721  
driver  
in  
the  
following  
path:  
X:\CHIPDRV\VGA\SM721\WINNT40, highlight smisetup.inf, click  
OPEN. Click OK.  
5. A windows will appear and will shows the Display is Silicon Motion  
Lynx Family, click OK, then click Yes to continue.  
6. An Installing Driver window appears indicating  
a
successful  
installation, click OK to continue.  
7. Click Close button.  
8. Click Close button, then restart the computer to activate the new  
driver.  
Note: After installing the VGA/AGP drivers, and you find the driver  
does not work. This maybe due to not installing the NT service  
pack in advance. We suggest installing NT service pack 4 or  
higher to enable AGP capability.  
Driver Installation · 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2 LAN Drivers Installation  
This chapter describes LAN driver installation for the onboard Ethernet  
controller Intel 82559. The relative drivers are under the following ADLINK  
CD directory: X:\CHIPDRV\LAN\100PDISK, where X: is the location of the  
CD-ROM drive.  
4.2.1 Software and Drivers Support  
The 82559 drivers support the following OS or platforms:  
·
·
·
Windows 98, Windows 95, Windows 2000, Windows NT  
Novell Netware, DOS Setup for Novell NetWare DOS  
UNIX, OS2, Linux  
All the above drivers are included in the ADLINK CD. In the following section,  
we will describe the driver installation for Windows 98, Windows 2000, and  
Windows NT. For driver installation of other OS’s, please refer to the readme  
file inside the CD.  
4.2.2 Driver Installation on Windows 2000  
Windows 2000 may install the LAN driver. We recommend you to manually  
install the most updated LAN driver, which is shipped with the ADLINK CD to  
guarantee compatibility. After installing Windows 2000, please update to the  
new driver by following these procedures.  
1. Boot Windows 2000, Click Start. Select Settings then double-click  
the Control Panel.  
2. Double-click System icon, click Hardware tab, click Device Manager  
button.  
3. Double-click Network Adapters entry,Double-click the Intel 8255x-  
based PCI Ethernet Adapter (10/100) entry.  
4. Click Driver tab, then click Update Driver… button.  
5. An Upgrade Device Driver Wizard window will appear, click Next>.  
6. Select Display a list of ... and click Next>. The next window will  
show a list of hardware models.  
7. Insert the CD and click Have Disk.  
8. Browse the Intel 82559 driver in the following path:  
X:\CHIPDRV\LAN\100PDISK, highlight oemsetup.inf, click Open,  
then click OK.  
42 · Driver Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Highlight the model: Intel 8255x- based PCI Ethernet Adapter  
(10/100), then click NEXT>. An Update Driver Warning window may  
pop up, click Yes to continue.  
10. Click NEXT> button, then the Wizard summary window appears.  
11. Click Finish button, then click CLOSE button.  
4.2.3 Driver Installation on Windows 98  
Windows 98 will install the LAN driver automatically. We recommend you to  
manually update to the new LAN driver, which comes with the ADLINK CD to  
guarantee compatibility. After installing Windows 98, please update the new  
drivers by the following procedures.  
1. Boot Windows 98, Click Start. Select Settings then double-click the  
Control Panel.  
2. Double-click on the System icon, click on the Device Manager tab.  
3. Double-click on the Network Adapters entry,select  
the  
Intel  
8255x-based PCI Ethernet Adapter (10/100) entry. Click the  
Properties button.  
4. Click on the Driver button, then click Update Driver… button.  
5. Update Device Driver Wizard starts, click NEXT.  
6. Select Display a list of ... and click NEXT. The next window allows  
the user to specify a specific path. Insert the CD and click Have Disk.  
7. Browse the Intel 82559 driver in the following path:  
X:\CHIPDRV\LAN\100PDISK, highlight net82557.inf, click OK. The  
Update Wizard displays a message that it has found the driver. Click  
OK again to update the driver. Note: Windows 98 may ask you to  
insert the original Windows 98 CD to install the LAN protocols.  
8. Click NEXT button, then the Wizard summary window appears.  
9. Click Finish button, then restart the computer to activate the new  
driver.  
Driver Installation · 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.2.4 Driver Installation on Windows NT  
Before install the LAN driver on Windows NT, please copy the LAN driver in  
the CD to a floppy diskette. You have to put a new disk into drive A, then type  
the following batch command under the DOS environment to copy the  
relative NT drivers.  
X:\CHIPDRV\LAN\100PDISK\Makedisk\Makedisk NT  
where X is the CD-ROM drive.  
Windows NT may ask to installs a LAN driver from its own library of drivers.  
We recommend you to manually update to the new LAN driver, which comes  
with the ADLINK CD to guarantee compatibility. After installing Windows 98,  
please update to the new driver by following these procedures.  
1. From the Control Panel, double-click the Netwrok icon, a Network  
Configuration window pops up, click Yes.  
2. In Network Setup Wizard, click Next>, click Select From List…  
button.  
3. Insert LAN driver floppy diskette into A drive and click Have Disk.  
4. In the dialog box of Insert Disk window, type in A:, Click OK.  
5. A Select OEM Option window pops up, click OK, then click Next>.  
6. Select necessary Network Protocols, click Next>.  
7. Select necessary Network Services, click Next>.  
8. Click Next> until Window NT Setup dialog box pop up. Type in  
D:\i386 in the dialog box, then insert the original Windows NT CD,  
click Continue.  
9. Then click OK until the setup is completed.  
10. Reboot the computer.  
44 · Driver Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Watchdog and Utilities  
This chapter takes you through how to configure the watchdog timer and a  
brief introduction to the utilities that are available to the cPCI-3720  
5.1 Watchdog Timer Configuration  
The Watch Dog Timer (WDT) can monitor the system's status. Once you  
give a value to the WDT, the timer will begin to count down, moving the  
keyboard can restart the WDT. If the system is idle or hangs, it will reboot  
when the timer times out.  
The function of the watchdog timer is to reset the system automatically. It  
contains a one-second (or one-minute) resolution down counter (in CRF2 of  
logical device 8 of super I/O chip) and two Watchdog control registers (CRF4  
and CRF3 of logical device 8).  
We provide WDT function calls for easy use under DOS, Windows  
95/98/2000, and Windows NT, please refer to the information under  
X:\CHIPDRV\WDT.  
Watchdog and Utilities · 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.1.1 WDT Programming  
In order to simplify the programming code, we have provided a sub function  
for programmers to implement with their software. For DOS, Windows 95, 98  
and Windows NT, the sub function format is as follows:  
out_port (int IOport_number, int Counter_value)  
IOport_number:0x3F0 -->W83977EF's configuration port.  
0x2E -->W83627HF's configuration port.  
Counter_value: 0 ~ 15300 (255 minutes)  
(write a zero to disable the timer)  
Under DOS, Windows 95 or 98  
wdt.cpp  
Make a project program called  
Under Windows NT  
under Turbo C/C++.  
The library installation procedure:  
(1) run the setup program under NT environment.  
(2) reboot the system.  
You can also write your own DLL by referring to the DOS sources we have  
provided.  
5.1.2 How to Test the WDT?  
Under DOS, Windows 95 or 98  
Open a DOS command prompt and execute the following utility on the CD.  
X:\CHIPDRV\WDT\test <n>  
/* n = second value. This program can auto-detect which Super I/O chip you  
are using. */  
Under Windows NT  
Before you executing this program under NT, you must run the setup  
program under Windows NT in advance. Open a DOS command prompt  
window and execute the following command.  
test977 <n>: n = second value. For W83977EF  
46 · Watchdog and Utilities  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.2 Hardware Doctor Utility  
This section introduces the Hardware Doctor Utility that comes with the CPU  
board in conjunction with the onboard hardware monitoring functions. The  
section describes the functions of the utility.  
Hardware Doctor is a self-diagnostic system for PC and must be used with  
the Winbond W83781D/W83782D or W83627HF IC series products. It will  
protect the PC Hardware by monitoring several critical items including Power  
Supply Voltage, CPU Fan speed, and CPU & System temperature. These  
items are important to the operation of system; errors may result in  
permanent damage to the PC. If any item is out of its normal range, an  
obvious warning message will pop up and notify the user to take the  
appropriate action.  
The Hardware Doctor utility supports Windows 98 and Windows NT. The  
software is stored on the ADLINK CD under the following directory:  
X:\Utility\HWDoctor\W8378X\WIN98  
X:\Utility\HWDoctor\W8378X\NT40.  
and  
To install the Hardware Doctor Utility execute the HWM-98.exe or  
HWM-NT.exe respectively under Windows 98 or Windows NT.  
For a detail user's manual, please refer the HWDoctor.PDF under the  
X:\Utility\HWDoctor\W8378X.  
Watchdog and Utilities · 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.3 Intel Preboot Execution Environment (PXE)  
The cPCI-6760DK/P5 series supports Intel Preboot Execution Environment  
(PXE), which provides the capability of boot-up or executing an OS  
installation through the Ethernet ports. There should be a DHCP server in  
the network with one or more servers running PXE and MTFTP services. It  
could be a Windows NT or Windows 2000 server running DHCP, PXE and  
MTFTP service or a dedicated DHCP server with one or more additional  
server running PXE and MTFTP service. This section describes the major  
items required for building a network environment with PXE support.  
1. Setup a DHCP server with PXE tag configuration.  
2. Install the PXE and MTFTP services  
3. Make boot image file on PXE server (that is the boot server).  
4. Enable the PXE boot function on the client computer.  
For more detailed information, please refer to pdkrel30.pdf under the  
directory X:\Utility\PXE_PDK.  
48 · Watchdog and Utilities  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5.4 Intel Adapter Teaming  
The cPCI-6760DK/P5 series support Intel Adapter Teaming which provides  
several options for increasing throughput and fault tolerance when running  
Windows 2000, Windows NT 4.0, or NetWare 4.1x or newer. There are four  
options that can be supported by the cPCI-6760DK/P5. The options are  
listed below:  
1. Adapter Fault Tolerance: provides automatic redundancy for your  
Ethernet port (adapter). If the primary port (adapter) fails, the secondary  
takes over. You can create up to eight Fault Tolerance teams. Each  
team can have 2 - 8 ports (or adapters).  
2. Adaptive Load Balancing (ALB): creates a team of two to eight  
Ethernet ports (or adapters) to increase transmission throughput. Also  
includes Fault Tolerance option. Works with most switches.  
3. Fast Ethernet Channel (FEC): creates a team of two, four or eight ports  
(adapters) to increase transmission and reception throughput. Also  
includes Fault Tolerance option. Requires a switch with FEC capability.  
You can create up to four teams.  
4. Link Aggregation: creates a team of two, four or eight ports (adapters)  
to increase transmission and reception throughput. Also includes Fault  
Tolerance option. Requires a switch with Link Aggregation capability.  
You can create up to four teams.  
For more detailed information, please refer to prosetp.hlp under the  
directory X:\CHIPDRV\LAN\100PDISK  
Watchdog and Utilities · 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Policy  
Thank you for choosing ADLINK. To understand your rights and enjoy all the  
after-sales services we offer, please read the following carefully.  
1. Before using ADLINK’s products, please read the user manual and  
follow the instructions exactly. When sending in damaged products  
for repair, please attach an RMA application form.  
2. All ADLINK products come with a two-year guarantee, free of repair  
charge.  
·
·
·
The warranty period starts from the product’s shipment date from  
ADLINK’s factory  
Peripherals and third-party products not manufactured by  
ADLINK will be covered by the original manufacturers’ warranty  
End users requiring maintenance services should contact their  
local dealers. Local warranty conditions will depend on the local  
dealers  
3. Our repair service does not cover the two-years warranty if damage  
goods are cause by the following:  
a. Damage caused by not following instructions on user menus.  
b. Damage caused by carelessness on the users’ part during  
product transportation.  
c. Damage caused by fire, earthquakes, floods, lightening, pollution  
and incorrect usage of voltage transformers.  
d. Damage caused by unsuitable storage environments with high  
temperatures, high humidity or volatile chemicals.  
e. Damage caused by leakage of battery fluid when changing  
batteries.  
f. Damages from improper repair by unauthorized technicians.  
g. Products with altered and damaged serial numbers are not  
entitled to our service.  
h. Other categories not protected under our guarantees.  
50 • Warranty Policy  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Customers are responsible for the fees regarding transportation of  
damaged products to our company or to the sales office.  
5. To ensure the speed and quality of product repair, please download  
an RMA application form from our company website  
www.adlinktech.com. Damaged products with RMA forms attached  
receive priority.  
For further questions, please contact our FAE staff.  
Test & Measurement Product Segment: [email protected]  
Automation Product Segment: [email protected]  
Computer & Communication Product Segment: [email protected];  
Warranty Policy · 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  

National Instruments Network Card NI USB 6008 User Manual
National Instruments Switch NI CVS 1450 Series User Manual
NEC Computer Monitor FE700M User Manual
Niles Audio Speaker CM61SI User Manual
Nilfisk Advance America Vacuum Cleaner BR1100S User Manual
Output Solutions Printer PS40T User Manual
Panasonic Answering Machine KX TG5871AL User Manual
Panasonic IP Phone KX HGT100 User Manual
Panasonic Network Card 2SA2122G User Manual
Paradyne Network Card 392xPLUS User Manual