Multiquip Portable Generator ga6HB User Manual
OperatiOn and parts Manual  
MOdel ga6HB/ga6HeB  
pOrtaBle generatOrs  
(HOnda gX340r2edn2/gX340r2ede2  
gasOline engines)  
Revision #0 (03/13/14)  
To find the latest revision of this  
publication, visit our website at:  
www.multiquip.com  
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PaRTs oRDeRinG PRoCeDuRes  
ordering parts has never been easier!  
Choose from three easy options:  
Effective:  
January 1st, 2006  
Best deal!  
Order via internet (dealers Only):  
Order parts on-line using Multiquip’s SmartEquip website!  
If you have an MQ Account, to obtain a Username  
and Password, E-mail us at: parts@multiquip.  
com.  
■ View Parts Diagrams  
■ Order Parts  
■ Print Specification Information  
To obtain an MQ Account, contact your  
District Sales Manager for more information.  
Use the internet and qualify for a 5% discount  
on Standard orders for all orders which include  
complete part numbers.*  
Goto www.multiquip.com and click on  
to log in and save!  
Order Parts  
Note: Discounts Are Subject To Change  
Fax your order in and qualify for a 2% discount  
on Standard orders for all orders which include  
complete part numbers.*  
Order via Fax (dealers Only):  
All customers are welcome to order parts via Fax.  
domestic (us) Customers dial:  
1-800-6-PARTS-7 (800-672-7877)  
Note: Discounts Are Subject To Change  
domestic (us) dealers Call:  
1-800-427-1244  
Order via phone:  
Non-dealer Customers:  
International Customers should contact  
their local Multiquip Representatives for  
Parts Ordering information.  
Contact your local Multiquip Dealer for  
parts or call 800-427-1244 for help in  
locating a dealer near you.  
when ordering parts, please supply:  
❒
dealer Account Number  
❒
specify preferred method of shipment:  
❒
❒
❒
❒
❒
dealer Name and Address  
✓ UPS/Fed Ex ✓  
Priority One ✓  
DHL  
Truck  
■
shipping Address (if different than billing address)  
Return Fax Number  
Applicable model Number  
■
Ground  
■ Next Day  
■
Second/Third Day  
Quantity, part Number and description of Each part  
NOTICE  
All orders are treated as Standard Orders and will  
ship the same day if received prior to 3PM PST.  
WE ACCEpT All mAJOR CREdiT CARds!  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
Do not operate or service the equipment before reading the  
entire manual. Safety precautions should be followed at all  
times when operating this equipment. Failure to read and  
understand the safety messages and operating instructions  
could result in injury to yourself and others.  
Potential hazards associated with the operation of this  
equipment will be referenced with hazard symbols which  
may appear throughout this manual in conjunction with  
safety messages.  
sAFETY mEssAgEs  
The four safety messages shown below will inform you  
about potential hazards that could injure you or others.The  
safety messages specifically address the level of exposure  
to the operator and are preceded by one of four words:  
dANgER,WARNiNg, CAuTiON or NOTiCE.  
sAFETY sYmBOls  
dANgER  
Indicates a hazardous situation which, if not avoided,  
Will result in dEATh or sERiOus iNJuRY.  
WARNiNg  
Indicates a hazardous situation which, if not avoided,  
COuld result in dEATh or sERiOus iNJuRY.  
CAuTiON  
Indicates a hazardous situation which, if not avoided,  
COuld result in miNOR or mOdERATE iNJuRY.  
NOTICE  
Addresses practices not related to personal injury.  
pAgE 4 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
„ AlWAYsknow the location of the nearest phone or keep  
a phone on the job site. Also, know the phone numbers  
of the nearest ambulance,doctorand firedepartment.  
This information will be invaluable in the case of an  
emergency.  
gENERAl sAFETY  
CAuTiON  
„ NEvER operate this equipment without proper protective  
clothing, shatterproof glasses, respiratory protection,  
hearing protection, steel-toed boots and other protective  
devices required by the job or city and state regulations.  
gENERATOR sAFETY  
dANgER  
„ NEvER operate this equipment when not  
feeling well due to fatigue, illness or when  
under medication.  
„ NEvERoperate the equipment in an explosive  
atmosphere or near combustible materials.An  
explosion or fire could result causing severe  
bodily harm or even death.  
„ NEvER operate this equipment under the influence of  
drugs or alcohol.  
WARNiNg  
„ NEvER disconnect any emergency or safety devices.  
These devices are intended for operator safety.  
Disconnection of these devices can cause severe injury,  
bodily harm or even death.Disconnection of any of these  
devices will void all warranties.  
„ AlWAYs check the equipment for loosened threads or  
bolts before starting.  
CAuTiON  
„ dO NOT use the equipment for any purpose other than  
its intended purposes or applications.  
„ NEvER lubricate components or attempt service on a  
running machine.  
NOTICE  
NOTICE  
„ This equipment should only be operated by trained and  
qualified personnel 18 years of age and older.  
„ AlWAYs ensure generator is on level ground before use.  
„ AlWAYs keep the machine in proper running condition.  
„ Whenever necessary, replace nameplate, operation and  
safety decals when they become difficult read.  
„ Fix damage to machine and replace any broken parts  
immediately.  
„ Manufacturer does not assume responsibility for any  
accident due to equipment modifications. Unauthorized  
equipment modification will void all warranties.  
„ AlWAYs store equipment properly when it is not being  
used.Equipment should be stored in a clean, dry location  
out of the reach of children and unauthorized personnel  
„ NEvER use accessories or attachments that are not  
recommended by Multiquip for this equipment. Damage  
to the equipment and/or injury to user may result.  
„ AlWAYs know the location of the nearest  
fire extinguisher.  
„ AlWAYs know the location of the nearest  
first aid kit.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
ENgiNE sAFETY  
dANgER  
to prevent accidental discharge of sparks or flames  
from the engine exhaust. Spark arresters are qualified  
and rated by the United States Forest Service for this  
purpose. In order to comply with local laws regarding  
spark arresters, consult the engine distributor or the  
local Health and Safety Administrator.  
„ The engine fuel exhaust gases contain poisonous carbon  
monoxide. This gas is colorless and odorless, and can  
cause death if inhaled.  
„ The engine of this equipment  
requires an adequate free  
FuEl sAFETY  
dANgER  
flow of cooling air. NEvER  
operate this equipment in  
any enclosed or narrow area  
where free flow of the air is  
restricted. If the air flow is  
restricted it will cause injury to people and property and  
serious damage to the equipment or engine.  
„ dO NOT add fuel to equipment if it is placed inside truck  
bed with plastic liner. Possibility exists of explosion or  
fire due to static electricity.  
WARNiNg  
„ NEvER operate the engine with heat shields or  
guards removed.  
„ dO NOT remove the engine oil drain plug while  
the engine is hot. Hot oil will gush out of the engine  
crankcase and severely scald any persons in the general  
area of the generator.  
CAuTiON  
„ NEvER touch the hot exhaust manifold,  
muffler or cylinder.Allow these parts to cool  
before servicing equipment.  
„ dO NOTstart the engine near spilled fuel or combustible  
fluids. Diesel fuel is extremely flammable and its vapors  
can cause an explosion if ignited.  
NOTICE  
„ NEvER run engine without an air filter or with a dirty air  
filter.Severe engine damage may occur.Service air filter  
frequently to prevent engine malfunction.  
„ AlWAYs refuel in a well-ventilated area, away from  
sparks and open flames.  
„ NEvER tamper with the factory settings  
of the engine or engine governor. Damage  
to the engine or equipment can result  
if operating in speed ranges above the  
maximum allowable.  
„ AlWAYs use extreme caution when working with  
flammable liquids.  
„ dO NOT fill the fuel tank while the engine is running  
or hot.  
„ dO NOT overfill tank, since spilled fuel could ignite if it  
comes into contact with hot engine parts or sparks from  
the ignition system.  
„ State Health Safety Codes and Public Resources  
Codes specify that in certain locations, spark arresters  
must be used on internal combustion engines that use  
hydrocarbon fuels.A spark arrester is a device designed  
„ Store fuel in appropriate containers, in well-ventilated  
areas and away from sparks and flames.  
page 6 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
„ NEvER use fuel as a cleaning agent.  
„ Make sure power cables are securely connected to the  
generator’s output receptacles. Incorrect connections  
may cause electrical shock and damage to the  
generator.  
„ dO NOT smoke around or near the  
equipment. Fire or explosion could result  
from fuel vapors or if fuel is spilled on a  
hot engine.  
NOTICE  
„ AlWAYs make certain that proper power or extension  
cord has been selected for the job. See Cable Selection  
Chart in this manual.  
ElECTRiCAl sAFETY  
dANgER  
„ Turn generator and all circuit breakers OFF before  
performing maintenance on the generator or making  
contact with output receptacles.  
grounding safety  
dANgER  
„ AlWAYs make sure that electrical circuits are properly  
grounded to a suitable earth ground (ground rod) per  
the National Electrical Code (NEC) and local codes  
before operating generator. severe injury or death by  
electrocutioncan result from operating an ungrounded  
generator.  
„ NEvER insert any objects into the  
output receptacles during operation.  
This is extremely dangerous. The  
possibility exists of electrical shock,  
electrocution or death.  
„ Backfeed to a utility system can cause  
electrocutionand/or property damage.  
NEvER connect the generator to a  
building’s electrical system without  
a transfer switch or other approved  
device. All installations should be  
performed by a licensed electrician in accordance with  
all applicable laws and electrical codes. Failure to do so  
could result in electrical shock or burn, causing serious  
injury or even death.  
„ NEvER use gas piping as an electrical ground.  
BATTERY sAFETY (ElECTRiC sTART ONlY)  
dANgER  
„ dO NOT drop the battery. There is a possibility that the  
battery will explode.  
„ dONOTexpose the battery to open flames,  
sparks, cigarettes, etc.The battery contains  
combustible gases and liquids. If these  
gases and liquids come into contact with a  
flame or spark, an explosion could occur.  
power Cord/Cable safety  
dANgER  
„ dO NOT charge battery if frozen. Battery can explode.  
When frozen, warm the battery to at least 61°F (16°C).  
„ NEvER let power cords or cables lay in water.  
„ NEvER stand in water while AC power from the  
generator is being transferred to a load.  
WARNiNg  
„ AlWAYs wear safety glasses when  
handling the battery to avoid eye irritation.  
The battery contains acids that can cause  
injury to the eyes and skin.  
„ NEvER use damaged or worn cables or cords when  
connecting equipment to generator. Inspect for cuts in  
the insulation.  
„ NEvER grab or touch a live power  
cord or cable with wet hands. The  
possibility exists of electrical shock,  
electrocution or death.  
„ Use well-insulated gloves when picking up the battery.  
„ AlWAYs keep the battery charged. If the battery is not  
charged, combustible gas will build up.  
„ AlWAYs recharge the battery in a well-ventilated  
environmenttoavoidtheriskofadangerousconcentration  
of combustible gasses.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
„ If the battery liquid (dilute sulfuric acid) comes into  
contact with clothing or skin, rinse skin or clothing  
immediately with plenty of water.  
ENviRONmENTAl sAFETY/dECOmmissiONiNg  
NOTICE  
Decommissioning is a controlled process used to safely  
retire a piece of equipment that is no longer serviceable.  
If the equipment poses an unacceptable and unrepairable  
safety risk due to wear or damage or is no longer cost  
effective to maintain (beyond life-cycle reliability) and is to  
be decommissioned (demolition and dismantlement),be  
sure to follow rules below.  
„ If the battery liquid (dilute sulfuric acid) comes into  
contact with eyes, rinse eyes immediately with plenty  
of water and contact the nearest doctor or hospital to  
seek medical attention.  
CAuTiON  
„ AlWAYs disconnect the NEgATivE battery terminal  
before performing service on the generator.  
„ dO NOT pour waste or oil directly onto the ground, down  
a drain or into any water source.  
„ AlWAYskeep battery cables in good working condition.  
Repair or replace all worn cables.  
„ Contact your country's Department of  
Public Works or recycling agency in your  
area and arrange for proper disposal of  
any electrical components, waste or oil  
associated with this equipment.  
TRANspORTiNg sAFETY  
CAuTiON  
„ NEvER allow any person or animal to stand underneath  
the equipment while lifting.  
„ When the life cycle of this equipment is over, remove  
battery and bring to appropriate facility for lead  
reclamation. Use safety precautions when handling  
batteries that contain sulfuric acid.  
NOTICE  
„ Before lifting, make sure that the equipment parts (lifting  
bail if equipped) are not damaged and screws are not  
loose or missing.  
„ When the life cycle of this equipment is over, it is  
recommended that the trowel frame and all other metal  
parts be sent to a recycling center.  
Metal recycling involves the collection of metal from  
discarded products and its transformation into raw  
materials to use in manufacturing a new product.  
„ Always make sure crane or lifitng device has been  
properly secured to the lifting bail (hook) of the  
equipment.  
Recyclers and manufacturers alike promote the process  
of recycling metal. Using a metal recycling center  
promotes energy cost savings.  
„ AlWAYs shutdown engine before transporting.  
„ NEvER lift the equipment while the engine is running.  
„ Tighten fuel tank cap securely and close fuel cock to  
prevent fuel from spilling.  
„ Use adequate lifting cable (wire or rope) of sufficient  
strength.  
„ Use one point suspension hook and lift straight  
upwards.  
„ dO NOT lift machine to unnecessary heights.  
„ AlWAYs tie down equipment during transport by  
securing the equipment with rope.  
page 8 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
safeTy infoRmaTion  
EmissiONs iNFORmATiON  
NOTICE  
The gasoline engine used in this equipment has been  
designed to reduce harmful levels of carbon monoxide  
(CO), hydrocarbons (HC) and nitrogen oxides (NOx)  
contained in gasoline exhaust emissions.  
This engine has been certified to meet US EPA Evaporative  
emissions requirements in the installed configuration.  
Attempting to modify or make adjustments to the engine  
emmission system by unauthorized personnel without  
proper training could damage the equipment or create an  
unsafe condition.  
Additionally, modifying the fuel system may adversely affect  
evaporative emissions, resulting in fines or other penalties.  
Emission Control label  
The emission control label is an integral part of the emission  
system and is strictly controlled by regulation(s).  
The label must remain with the engine for its entire life.  
If a replacement emission label is needed, please contact  
your authorized Honda Engine Distributor.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
sPeCifiCaTions (GeneRaToR)  
Table 1. specifications (generator)  
GA6HB  
Brushless Revolving Field Type  
Model  
GA6HEB  
Type  
Excitation  
Solid State, Statically Excited System  
AC generator  
Speed  
3,600 RPM  
Self-Ventilation  
5 gallons (19 liters)  
5.0 kW  
Cooling System  
Fuel Capacity  
Continuous Power Output  
Max Power Output  
Rated Voltage  
Current Max/Continuous (120V)  
Current Max/Continuous (240V)  
Phase  
6.0 kW  
120/240V  
50.0/41.6 amps  
25.0/20.8 amps  
Single Phase (4 wire)  
60 Hz  
60 hz AC power  
source  
Frequency  
Power Factor  
1
dimensions  
(l xW x h)  
27.2 x 22.0 X 22.0 in.  
(690 X 560 X 560 mm)  
27.2 x 22.0 X 22.0 in.  
(690 X 560 X 560 mm)  
dry NetWeight  
194 lbs. (88 kg.)  
214 lbs. (97 kg.)  
Battery specifications for GA-6HEB : 12volts, 26Amp  
hours, 260 amps cold cranking ability :  
7-1/2" (L) X 5"(W) X 7-1I4"(H)  
Battery (GA6HEB Only)  
NOTICE  
In keeping with Multiquip's policy of constantly  
improving its products, the specifications quoted herein  
are subject to change without prior notice.  
pAgE 10 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
sPeCifiCaTions (enGine)  
Table 2. specifications (Engine)  
hONdA gX340R2EdN2  
model  
hONdA gX340R2EdE2  
Air-cooled 4 stroke, Single Cylinder, OHV, Horizontal Shaft  
Gasoline Engine  
Type  
3.46 in. X 2.52 in.  
(88 mm x 64 mm.)  
Bore X Stroke  
Displacement  
Max Output  
23.70 cu-in (389 cm3)  
11.0 H.P./3600 R.P.M.  
Unleaded Automobile Gasoline  
1.16 quarts (1.1 liters)  
Yes  
Engine  
Fuel  
Lube Oil Capacity  
Oil Alert System  
Speed Control Method  
Starting Method  
Centrifugal Fly-weight Type  
Recoil Start  
Electric Start  
dimensions  
(l xW x h)  
15.0 x 17.7 X 17.4 in.  
(380 X 450 X 443 mm)  
15.0 x 17.7 X 17.4 in.  
(380 X 450 X 443 mm)  
dry NetWeight  
68.4 lbs. (31 kg.)  
68.4 lbs. (31 kg.)  
Effects of Altitude and heat  
The maximum output of the engines listed above are applicable to supplying electrical power for continuous service at  
ambient conditions in accordance with SAE Test cord J607. The above ambient conditions are at standard sea level, with  
a barometric reading of 29.92 inches and a temperature of 60° F (15.5° C).  
Generally, the engine's output power will decrease 3-1/2% for each 1000 feet (305 meters) of altitude above sea level, and  
1% for each 10° F (-12.2° C) above the standard temperature of 60° F (15.5° C).  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
ON  
GA-6HB  
0N  
V
120  
120  
OFF  
P
F
A
U
L
O
W
E
OFF  
IDLE  
CONTROL  
R
T
AC VOLTMETER  
120V  
OPERATION  
SWITCH  
120/240V  
30A  
120  
30A  
120  
MANUAL RESET  
20A  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120V  
120V/240V  
FULL POWER  
SWITCH  
A
120  
V
120  
V
20A  
20A  
IN SIMULTANEOUS USE 30 AMP MAX  
B
C
D
Figure 1. Dimensions  
Table 3. generator dimensions  
REFERENCE  
lETTER  
dEsCRipTiON  
dimENsiONs: iN. (mm)  
A
B
C
HEIGHT (LIFTING BALE)  
HEIGHT (FRAME)  
LENGTH  
26.75 (679)  
22.00(560)  
27.20 (690)  
22.0 (560) GA6HB  
22.6 (573.5) GA6HEB  
D
WIDTH  
pAgE 12 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
noTe  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
insTallaTion  
CONNECTiNgThE gROuNd  
The nut and ground terminal on the generator should always  
be used to connect the generator to a suitable ground.The  
ground cable should be #8 size wire (aluminum) minimum.If  
copper wire is used, #10 size wire minimum should be used  
At the generator, connect the terminal of the ground cable  
between the lock washer and the nut (Figure 2) and tighten  
the nut fully. Connect the other end of the ground cable to  
a suitable earth ground (ground rod).  
ON  
GA-6HB  
0N  
V
120  
120  
OFF  
P
F
A
U
L
O
W
E
OFF  
IDLE  
CONTROL  
R
T
AC VOLTMETER  
120V  
OPERATION  
SWITCH  
120/240V  
30A  
120  
120  
MANUAL RESET  
30A  
20A  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120V  
120V/240V  
FULL POWER  
SWITCH  
120  
V
120  
V
20A  
20A  
IN SIMULTANEOUS USE 30 AMP MAX  
GROUND ROD  
FOR EARTH  
GROUND  
GROUND  
CABLE  
GENERATOR  
GROUND LUG  
#8 MINIMUM  
CONNECT TO  
BUILDING  
GROUND  
IF REQUIRED  
8 FT. MINIMUM  
REFERENCE  
NEC 250-52(C)  
Figure 2. Generator Grounding  
pAgE 14 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
insTallaTion  
OuTdOOR iNsTAllATiON  
gENERATOR gROuNdiNg  
If possible install the generator in a area that is free of  
debris, bystanders, and overhead obstructions. Make sure  
the generator is on secure level ground so that it cannot  
slide or shift around.  
To guard against electrical shock and possible damage to  
the equipment, it is important to provide a good eaRTH  
ground.  
Article 250 (Grounding) of the National Electrical Code  
(NEC) provides guide lines for proper grounding and  
specifies that the cable ground shall be connected to the  
grounding system of the building as close to the point of  
cable entry as practical.  
The installation site must be relatively free from moisture  
and dust.All electrical equipment should be protected from  
excessive moisture. Failure to do will result in deterioration  
of the insulation and will result in short circuits and  
grounding.  
NEC articles 250-64(b) and 250-66 set the following  
grounding requirements:  
Foreign materials such as dust, sand, lint and abrasive  
materials have a tendency to cause excessive wear to  
engine and alternator parts.  
1. Use one of the following wire types to connect the  
generator to earth ground.  
WARNiNg  
a. Copper - 10 AWG (5.3 mm2) or larger.  
b. Aluminum - 8 AWG (8.4 mm2) or larger.  
Pay close attention to ventilation when  
operating the generator inside tunnels  
and caves. The engine exhaust contains  
noxious elements. Engine exhaust must  
be routed to a ventilated area  
2. When grounding the generator (Figure 2) connect the  
ground cable between the lock washer and the nut on  
the generator and tighten the nut fully. Connect the  
other end of the ground cable to earth ground.  
iNdOOR iNsTAllATiON  
3. NEC article 250-52(c) specifies that the earth ground rod  
should be buried a minimum of 8 ft. into the ground.  
Exhaust gases from gas engines are extremely poisonous.  
Whenever an engine is installed indoors the exhaust  
fumes must be vented to the outside. The engine should  
be installed at least two feet from any outside wall. Using  
an exhaust pipe which is too long or too small can cause  
excessive back pressure which will cause the engine to  
heat excessively and possibly burn the valves.  
NOTICE  
When connecting the generator to any buildings  
electrical system AlWAYs consult with a licensed  
electrician.  
plACEmENT  
The generator should always be placed on a flat level  
surface when it is running. DO NOT place the generator  
on slopes, the possibility exists that the generator could  
slide.  
dANgER  
An electric shock is apt to happen when  
vibrators are used. Pay close attention to  
handling when operating vibrators and  
always use rubber boots and gloves to  
insulate the body from a short circuit.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeneRal infoRmaTion  
FAmiliARizATiON  
generator  
dANgER  
Before connecting this generator to any building’s  
electrical system, a licensed electrician must install an  
isolation (transfer) switch.  
The Multiquip GA6HB/GA6HEB generator is designed as  
a portable dual purpose power source for 60 Hz (single  
phase) lighting facilities, power tools, submersible pumps  
and other industrial and construction machinery.  
Serious injury or death may result without this transfer  
switch.  
The generator is mounted on rubber vibration isolators  
that have a steel base backplate which is attached to the  
protective steel pipe carrying frame.  
The protective carrying frame is made of steel tubing and  
fully wraps around the generator to protect against damage.  
Reference Figure 3, Figure 4 and Figure 7 for the basic  
controls and indicators for the GA6HB/GA6HEB generators.  
These portable generator are supplied with a electrical  
control box (panel). To reduce vibration caused by the  
engine, the control box is also placed on rubber isolators.  
Control panel  
The control panel is provided with the following:  
„ 120V Twist-Lock Output Receptacle (L5-20R)  
„ 120V Twist-Lock Output Receptacle (L5-30R)  
„ 120/240V Twist-Lock Output Receptacle (L14-30R)  
„ 120 VAC GFCI Receptacle (2)  
„ GFCI Sensing Module  
„ 23 Amp Main Circuit Breaker.  
„ AC Voltmeter  
„ Idle Control Switch  
„ Full Power Switch  
„ Operation Switch  
„ Start Switch (GA6HEB only)  
pAgE 16 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ComPonenTs (GeneRaToR)  
4
2
3
8
9
9
5
6
7
ON  
GA-6HB  
GA-6HEB  
ELECTRIC START  
0N  
0N  
V
120  
V
120  
120  
OFF  
120  
OFF  
P
F
A
U
L
P
F
A
U
L
O
W
E
O
W
E
OFF  
IDLE  
IDLE  
R
T
AC VOLTMETER  
120V  
R
T
AC VOLTMETER  
120V  
CONTROL  
CONTROL  
OPERATION  
SWITCH  
OPERATION  
SWITCH  
120/240V  
30A  
120  
30A  
120/240V  
30A  
120  
30A  
120  
120  
MANUAL RESET  
MANUAL RESET  
20A  
20A  
13  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120  
1
V
2
/
0
240V  
V
120V  
120V/240V  
FULL POWER  
SWITCH  
FULL POWER  
SWITCH  
START  
SWITCH  
1
120  
V
120  
V
120  
V
120  
V
20A  
20A  
20A  
20A  
IN SIMULTANEOUS USE 30 AMP MAX  
IN SIMULTANEOUS USE 30 AMP MAX  
12  
10  
11  
14  
Figure 3. Generator Components  
8. idle Control switch – The generator is provided with  
an automatic idle control device for noise suppression  
and reduced fuel consumption.  
1. 120/240vOutputReceptacle–NEMA L14-30R twist-  
lock receptacle will provide 240V, 60 Hz @ 20.8 amps,  
or 120V@ 41.6 amps (X2) 60 Hz. Depending on the  
position of the full power switch.  
The automatic idle control automatically engages under  
a no-load condition. With the automatic idle control  
switched “ON”, the engine revolutions will automatically  
drop to about 2600 rpm (low-speed operation) within  
3 seconds after the load stops. When the operation is  
resumed, the engine speed is automatically increased  
to about 3600 rpm (high-speed operation) as soon as  
the load is connected.  
2. 120v Output Receptacle – NEMA L5-30R twist-lock  
receptacle will provide 120V, 30 amps, 60 Hz.  
3. 120v Output Receptacle – NEMA L5-20R twist-lock  
receptacle will provide 120V, 20 amps, 60 Hz.  
4. lifting Ball Eye – Attach a rope or chain to this lifting  
eye when lifting of the generator is required. Never  
stand underneath the generator while it is being lifted.  
Place lifting eye in down position when not in use.  
9. Operationswitch – Place switch in the "ON" position  
(up) for normal operation. To turn-off the generator,  
place the operation switch in the "OFF" position (down).  
5. gFCi sensing module – Interrupts power when a  
ground fault exist.  
10. gFCi duplex Receptacles – NEMA 5-20R, GFCI  
receptacle will provide 120V@ 20 amps.  
6. main Breaker – This 2-pole, 23 amp circuit breaker  
protects the generator from short circuiting or  
overloading.When starting the generator always have  
the circuit breaker placed in the "OFF" position.  
11. ground – This ground connection point should be  
connect to a good earth ground (ground rod).  
12. Charcoal Canister – A container filled with activated  
charcoal that traps gasoline vapors emitted by the  
fuel system.  
7. AC-voltmeter – This voltmeter indicates (with a  
mark) the rated 60 Hz (single-phase) output voltage.  
In addition the voltmeter can also be used as a  
diagnostic tool. If the voltmeter indicator (needle) is  
below the rated voltage, engine problems may exist  
(low/high RPM's).To prevent damage to the generator  
or power tools turn the generator OFFand consult your  
authorized Multiquip service dealer.  
13. start switch – Press this pushbutton switch to start  
the generator (GA6HEB only).  
14. Battery – This unit is equipped with a 12 VDC  
battery. Replace with only recommended type battery  
(GA6HEB only).  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ComPonenTs (GeneRaToR)  
15  
15  
ON  
GA-6HB  
GA-6HEB  
ELECTRIC START  
0N  
0N  
V
120  
V
120  
120  
OFF  
120  
OFF  
P
F
A
U
L
P
F
A
U
L
O
W
E
O
W
E
OFF  
IDLE  
CONTROL  
IDLE  
CONTROL  
R
T
AC VOLTMETER  
120V  
R
T
AC VOLTMETER  
120V  
OPERATION  
SWITCH  
OPERATION  
SWITCH  
120/240V  
30A  
120  
30A  
120/240V  
30A  
120  
30A  
120  
120  
MANUAL RESET  
MANUAL RESET  
20A  
20A  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120  
1
V
2
/
0
240V  
V
120V  
120V/240V  
FULL POWER  
SWITCH  
FULL POWER  
SWITCH  
START  
SWITCH  
120  
V
120  
V
120  
V
120  
V
20A  
20A  
20A  
20A  
IN SIMULTANEOUS USE 30 AMP MAX  
IN SIMULTANEOUS USE 30 AMP MAX  
Figure 4. Full Power Switch  
15. Full power switch – The generator is provided with a  
full power switch.Figure 5 and Figure 6 show simplified  
wiring diagrams of the dual voltage system.  
When the switch is in the 240 volt (down) position, you can  
access half of the rated power of the generating set at 120  
volts from the GFCI duplex receptacle and up to half of the  
rated power of the set at 120 volts from 120V twist-lock  
receptacle; or full rated power of the set at 240 volts from  
the 240V twist-lock receptacle.  
When the full power switch is in the 120 volt (up)  
position, you can access the full rated power of the  
generator at 120 volts from the GFCI duplex receptacle  
and the120V twist-lock receptacle, or a combination  
of both receptacles as long as the total load does not  
exceed the generating set capacity.  
Figure 6. 240/120V Full Power Switch  
Simplified Diagram (Down Position)  
NOTICE  
Figure 5. 120V Full Power Switch  
Simplified Diagram (Up Position)  
When using a combination of receptacles, total load  
should not exceed the rated capacity of the generator.  
NOTICE  
NOTICE  
When the full power switch is in the 120V position, the  
240V twist-lock receptacle cannot be used..  
In simultaneous mode use of receptaces, Figure 3,  
items 3 and 10 (right most GFCI) is 30 amps maximum.  
dONOTexceed 30 amps when using this configuration.  
pAgE 18 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ComPonenTs (GeneRaToR)  
24  
25 26  
GA-6H  
16  
18  
17  
20  
23  
21  
22  
19  
Figure 7. Generator Components (Continued)  
16. Fuel gauge – This gauge is located on top of the fuel  
tank. Read this gauge to determine when fuel is low.  
23. muffler/heat shield – Used to reduce noise and  
emissions. NEvER touch this heat shield when the  
generator/welder is in use.Always allow time for engine  
to cool before servicing.  
17. Fuel Tank Cap – Remove this cap to add unleaded  
gasoline to the fuel tank.Replenish with clean unleaded  
gasoline. Make sure cap is tightened securely. dO  
NOT over fill.  
24. spark plug – Provides spark to the ignition system.  
Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch)  
Clean spark plug once a week.  
18. Fuel Tank – Capacity is 5 gallons (19 liters). Fill with  
unleaded gasoline.  
25. Choke lever – Used for starting the engine. Close  
the choke lever when starting a cold engine or in  
cold weather conditions. The choke enriches the fuel  
mixture.Open the choke lever if starting a warm engine  
or in warm weather conditions  
19. Air Cleaner – Prevents dirt and other debris from  
entering the fuel system.Remove wing-nut on top of air  
filter cannister to gain access to filter element. NEvER  
run the engine without an air cleaner.  
26. Fuel Cock lever – Turn this lever downward to start  
(down)the flow of fuel into the carburetor.Turn upward  
to stop (up) the flow of fuel.  
20. Recoil starter (pull rope) – Manual-starting method.  
Pull the starter grip until resistance is felt, then pull  
briskly and smoothly.  
NOTICE  
21. Engine Oil Filler Cap – Remove this cap/dipstick  
when the adding of engine oil is required. See Table 2  
for recommended type engine oil.  
This hONdA engine is equipped with a low oil  
shutdown capability. A built in sensor will automatically  
turn off the engine should the oil level fall below a safe  
operating condition.Make sure the generators is placed  
on level ground.Placing the generators on level ground  
will ensure that the low oil sensor will function properly.  
22. Engine Oil drain plug – Remove this drain plug  
when draining of the oil from the engine crankcase  
is required. Fill with recommended type oil as listed  
in Table 4.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
insPeCTion/seTuP  
gENERAl iNspECTiON pRiORTO OpERATiON  
NOTICE  
ground powerTools  
Double-insulated power tools and small appliances  
have specially insulated housings that eliminate the  
need for a ground pin.These types of double-insulated  
power cords are designed so that no part of the device  
will be electrically live even if the internal insulation fails.  
When using power tools or electrical equipment requiring  
AC power from the generator, make sure power tool cord  
has a ground pin or is double insulated as shown in Figure 8.  
Extension Cable  
When electric power is to be provided to various tools or  
loads at some distance from the generator, extension cords  
are normally used. Cables should be sized to allow for  
distance in length and amperage so that the voltage drop  
between the generator and point of use (load) is held to a  
minimum.Use the cable selection chart (Table 4) as a guide  
for selecting proper cable size.  
dANgER  
NEvER use power tools or equipment that do not  
have a ground capability, the possibility exists of  
electrocution, electrical shock or burn, which can cause  
severe bodily harm or even dEATh!  
Figure 8. Ground Pin  
Table 4. Cable selection (60 hz, single phase Operation)  
load inWatts  
maximum Allowable Cable length  
Current in  
Amperes  
120volts 240volts  
#10Wire  
1000 ft.  
500 ft.  
350 ft.  
250 ft.  
150 ft.  
125 ft.  
#12Wire  
600 ft.  
300 ft.  
200 ft.  
150 ft.  
100 ft.  
75 ft.  
#14Wire  
375 ft.  
200 ft.  
125 ft.  
100 ft.  
65 ft.  
#16 Wire  
250 ft.  
2.5  
5
300  
600  
600  
1200  
1800  
2400  
3600  
4800  
125 ft.  
7.5  
10  
15  
20  
900  
100 ft.  
1200  
1800  
2400  
50 ft.  
CAuTiON: Equipment damage can result from low voltage.  
page 20 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
insPeCTion/seTuP  
3. Insert and remove the dipstick without screwing it into  
the filler neck.Check the oil level shown on the dipstick.  
Before starting  
NOTICE  
4. If the oil level is low (Figure 10), fill to the edge of the  
oil filler hole with the recommended oil type (Figure  
10). Maximum oil capacity is 1.16 quarts (1.1 liters).  
AlWAYs place the main circuit breaker in the OFF  
position prior to starting the engine.  
1. Read safety instructions at the beginning of manual.  
2. Clean the generator, removing dirt and dust, particularly  
the engine cooling air inlet, carburetor and air  
cleaner.  
3. Check the air filter for dirt and dust. If air filter is dirty,  
replace air filter with a new one as required.  
4. Check carburetor for external dirt and dust. Clean with  
dry compressed air.  
Figure 10. Engine Oil Dipstick(Oil Level)  
5. Check fastening nuts and bolts for tightness.  
BATTERY sETup (gA6hBE)  
CAuTiON  
Table 5. OilType  
season  
Summer  
Spring/Fall  
Winter  
Temperature  
25°C or Higher  
25°C~10°C  
OilType  
SAE 10W-30  
SAE 10W-30/20  
SAE 10W-10  
Use all safety precautions specified by the battery  
manufacturer when working with the battery.See Safety  
Information section of this manual for more details on  
battery safety.  
0°C or Lower  
Fuel Check  
1. Close the fuel cock before filling the fuel tank.  
2. Remove the fuel cap located on top of fuel tank.  
1. Place the battery into the battery cradle and secured  
with mounting hardware.  
3. Read the fuel gauge located on top of the fuel tank  
(Figure 11) to determine if the fuel level is low. If fuel  
is low, replenish with clean unleaded fuel.  
2. Connect the positive cable to the positive terminal on  
the battery first, then connect the negative cable to the  
negative terminal.  
Engine Oil Check  
1. To check the engine oil level, place the generator on  
secure level ground with the engine stopped.  
2. Remove the filler dipstick from the engine oil filler hole  
(Figure 9) and wipe clean.  
Figure 11. Fuel Gauge  
4. When refueling, be sure to use a strainer for filtration.  
dO NOT top-off fuel. dO NOT fill the tank beyond  
capacity. Wipe up any spilled fuel immediately!  
Figure 9. Engine Oil Dipstick Removal  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
oPeRaTion  
This section is intended to assist the operator with the initial  
start-up of the portable generator. It is extremely important  
that this section be read carefully before attempting to use  
the generator in the field.  
Before starting the Engine  
NOTICE  
Both model generators are equipped with a GFCI  
sensing module. The purpose of this module is to  
sense a ground fault during operation of the generator  
and shut down the generator once the ground fault has  
been detected.  
Figure 14. Choke Lever  
3. Place the choke lever (Figure 14) in the OpeN position  
if starting a warm engine or the temperature is warm.  
4. Place the generator's operation switch (Figure 15) in  
the ON position.  
Multiquip recommends that the GFCI sensing module  
be tested before each use of the generator. Reference  
the maintenance section of this manual for the testing  
of the GFCI sensing module.  
GA-6HEB  
ON  
ON  
OFF  
1. Be sure to disconnect all electrical loads from the  
generator prior to starting the engine.  
GA-6HB  
2. NEvER start the engine with the main circuit breaker  
in the ON position. Always place circuit breaker (Figure 12)  
in the OFF position before starting.  
Figure 15. Operation Switch (ON)  
5. If your generator is a recoil start only (no battery), grasp  
the starter grip (Figure 16) and slowly pull it out. The  
resistance becomes the hardest at a certain position,  
corresponding to the compression point.Pull the starter  
grip briskly and smoothly for starting.  
ON  
Proceed to step 6 if your unit is an electric start model  
(battery installed).  
OFF  
Figure 12. Main Circuit Breaker (OFF)  
starting the Engine (Recoil start)  
1. Place the engine fuel valve lever (Figure 13) in the ON  
position.  
Figure 16. Starter Grip  
NOTICE  
dO NOT pull the starter rope all the way to the end.  
Figure 13. Engine Fuel Valve Lever (ON)  
dO NOT release the starter rope after pulling. Allow it  
to rewind as soon as possible..  
2. Place the choke lever (Figure 14) in the ClOsEd  
position if starting a cold engine.  
page 22 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
oPeRaTion  
6. Press the generator's pushbutton start switch  
(Figure 17) and listen for the engine to start.  
GA-6HB  
ON  
ON  
OFF  
GA-6HEB  
Figure 17. Start Switch (GA6HEB Only)  
Figure 19. Idle Control switch (ON)  
7. If the engine has started, slowly return the choke lever  
(Figure 14) to the OpeN position. If the engine has not  
started repeat steps 1 through 6.  
10. Place main circuit breaker (Figure 20) in the ON  
position.  
ON  
8. Before the generator is placed into operation, run the  
engine for 3-5 minutes. Check for abnormal smells,  
fuel leaks, and noises that would associate with lose  
components.  
OFF  
9. Place idle control switch (Figure 18) in the OFF  
position.This will allow the engine speed to run at about  
3600 RPM's.  
Figure 20. Main Circuit Breaker (ON)  
11. Read voltmeter on front panel of generator (Figure 21)  
and verify that 120VAC is displayed.Using an external  
voltmeter as shown in Figure 19, verify that 120 VAC  
is present at the 120V twist-lock and GFCI duplex  
receptacles.  
GA-6HEB  
ON  
OFF  
OFF  
GFCI  
W
GA-6HB  
Figure 18. Idle Control Switch (OFF)  
NOTICE  
G
120VAC  
X
L5-30R  
120V  
Placing the idle control switch in the OFF position  
(Figure 18) allows the engine to operate at a maximum  
speed of about 3600 RPM's.  
120 VAC  
OFF  
V~  
V
300 mV  
When the idle control switch (Figure 19) is placed in the  
up position (ON), the generator will run at idle speed  
(2200 RPM's) until a load is applied, at that time the  
engine speed will increase to 3600 RPM's as long as  
a load is being applied.  
A~  
A
120  
V
V
COM  
When the load is not in use, the engine speed will drop  
back to the idle mode after about 3 seconds.  
Figure 21. 120V Twist-Lock/GFCI Receptacles  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
oPeRaTion/sHuTDown  
12. Read voltmeter on front panel of generator (Figure 22)  
and verify that 240VAC is displayed.Using an external  
voltmeter as shown in Figure 22, verify that 240VAC is  
present at the 120/240V, L14-30R twist-lock receptacle.  
2. Place idle control switch (Figure 24) in the OFFposition.  
GA-6HEB  
ON  
120VAC  
X
240VAC  
X
L14-30R  
120VAC  
OFF  
L14-30R  
W
OFF  
W
G
G
120VAC  
GA-6HB  
Y
Y
Figure 24. Idle Control switch (OFF)  
3. Let engine run at idle with no load for 2-3 minutes.  
4. To shut-down the engine, place the generator's  
operation switch (Figure 25) in the OFF position).  
240 VAC  
OFF  
V~  
V
300 mV  
A~  
A
240  
V
V
Figure 25. Operation Switch (OFF)  
COM  
5. Place engine fuel valve lever (Figure 26) in the OFF  
position.  
Figure 22. 120/240V L14-30R Receptacle  
NOTICE  
When using a combination of dual receptacles, total  
load should not exceed the rated capacity of the  
generator.  
13. Connecting of loads (power tools, lighting etc.) to the  
generator receptacles can now be done.  
stopping the Engine (Normal shutdown)  
Figure 26. Engine Fuel Valve Lever (OFF)  
6. Remove all loads from the generator.  
Emergency shutdown  
1. Place main circuit breaker (Figure 23) in the OFF  
position.  
ON  
1. Place operation switch (Figure 25) in the OFF position  
OFF  
Figure 23. Main Circuit Breaker (OFF)  
pAgE 24 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRePaRaTion foR lonG TeRm sToRaGe  
generator storage  
For storage of the generating set for over 30 days, the  
following is required:  
„ Drain the fuel tank completely, or add STA-BIL to the  
fuel.  
„ Run the engine until the gasoline in the carburetor is  
completely consumed.  
„ Completely drain the oil from the crankcase and refill  
with fresh oil.  
„ Remove the spark plug, pour 2 or 3 cc of SAE 30 oil into  
the cylinder and crank slowly to distribute the oil.  
„ Slowly rotate the engine a few times with the starter rope  
and install a new plug.  
„ Pull out the starter rope slowly and stop at the  
compression point.  
„ Clean all external parts of the generating set with a  
cloth.  
„ Cover the generating set and store in a clean, dry  
place.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mainTenanCe  
Use Table 6 as a general maintenance guideline when  
servicing your engine.For more detail engine maintenance  
information, refer to the engine owner's manual supplied  
with your engine.  
Table 6. Engine maintenance schedule  
FiRsT EvERY 3  
BEFORE mONTh OR mONThs  
EvERY 6  
EvERY  
EvERY  
dEsCRipTiON (3)  
OpERATiON  
mONThs YEAR OR 2YEARs OR  
10 hRs. OR 25 hRs. OR 50 hRs. 100 hRs. 200 hRs.  
CHECK  
CHANGE  
CHECK  
X
X
Engine Oil  
Air Cleaner  
X
CHANGE  
REPLACE  
X (1)  
Charcoal Canister (4)  
All Nuts & Bolts  
RETIGHTEN IF  
NECESSARY  
X
CHANGE  
REPLACE  
CHECK  
X
Spark Plug  
X
Cooling Fins  
Spark Arrester  
Fuel Tank  
X
CLEAN  
X
CLEAN  
X
Fuel Strainer  
Idle Speed  
CHECK  
X
CHECK-ADJUST  
CHECK-ADJUST  
CHECK  
X (2)  
Valve Clearance  
Fuel lines  
X (2)  
Every 2 years, replace if necessary (2)  
(1) Service more frequently when used in dusTY areas.  
(2) These items should be serviced by your service dealer, unless you have the proper tools and are mechanically  
proficient. Refer to the HONDA Shop Manual for service procedures.  
(3) For commercial use, log hours of operation to determine proper maintenance intervals.  
(4) Charcoal canister is maintenance free (non-servicable). Replace only if damaged.  
page 26 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mainTenanCe  
mAiNTENANCE  
spark plug  
Perform the scheduled maintenance procedures as defined  
by Table 5 and below:  
1. Remove and clean the spark plug (Figure 28), then  
adjust the spark gap to 0.024 ~0.028 inch (0.6~0.7  
mm). This unit has electronic ignition, which requires  
no adjustments.  
daily  
Thoroughly remove dirt and oil from the engine and  
control area. Clean or replace the air cleaner elements as  
necessary.Check and retighten all fasteners as necessary.  
Wiring  
Inspect the entire generator for bad or worn electrical wiring  
or connections. If any wiring or connections are exposed  
(insulation missing) replace wiring immediately.  
Figure 28. Spark Plug Gap  
piping and hose Connection  
ENgiNE Oil  
Inspect all piping, oil hose, and fuel hose connections for  
wear and tightness.Tighten all hose clamps and check fuel  
or leaks. If any hose (fuel or oil) lines are defective replace  
them immediately.  
2. Drain the engine oil when the oil is warm as shown in  
Figure 29.  
3. Remove the oil drain bolt and sealing washer and allow  
the oil to drain into a suitable container.  
Fuel strainer  
1. Thoroughly clean the area around the fuel cap.  
2. Remove the fuel cap from the fuel tank.  
4. Replace engine oil with recommended type oil as listed  
in Table 4. For engine oil capacity, see Table 2 (engine  
specifications). dO NOT overfill.  
3. Next, remove, inspect and clean the fuel strainer  
(Figure 27) with solvent.  
5. Install drain bolt with sealing washer and tighten  
securely.  
Figure 27. Fuel Strainer  
Figure 29. Draining Engine Oil  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mainTenanCe  
ENgiNE AiR ClEANER  
dANgER  
spARk ARREsTER ClEANiNg  
Clean the spark arrester every 6 months or 100 hours.  
dO NOT use gasoline as a cleaning  
1. Remove the muffler protector retaining bolts (Figure 32),  
then remove muffler protector.  
solvent, the possibility exists of fire or  
explosion which can cause damage to  
the equipment and severe bodily harm or  
even dEATh!  
2. Next, remove tapping screw that secures spark arrestor  
to muffler, then remove spark arrester.  
1. Remove the air cleaner cover and foam filter element  
as shown in Figure 30.  
MUFFLER  
MUFFLER  
PROTECTOR  
RETAINING  
2. Clean foam element in warm, soapy water or  
nonflammable solvent. Rinse and dry thoroughly. Dip  
the element in clean engine oil and completely squeeze  
out the excess oil from the element before installing.  
BOLT  
TAPPING  
SCREW  
RETAINING  
BOLT  
SPARK  
ARRESTOR  
MUFFLER  
PROTECTOR  
Figure 32. Spark Arrester Removal  
3. Carefully remove carbon deposits from the spark  
arrester screen (Figure 33) with a wire brush.  
WIRE  
BRUSH  
Figure 30. Engine Air Cleaner  
3. Clean foam element (Figure 31 in warm, soapy water  
or non-flammable solvent. Rinse and dry thoroughly.  
4. Next, dip the element in clean engine oil and completely  
squeeze out the excess oil from the element before  
installing.  
SPARK  
ARRESTER  
SCREEN  
ENGINE OIL  
Figure 33. Cleaning The Spark Arrester  
FOAM  
ELEMENT  
4. If the spark arrester is damaged and has breaks or  
holes, replace with a new one.  
5. Reinstall the spark arrester and muffler protector in  
reverse order of disassembly.  
SQUEEZE  
SOLVENT  
THOROUGHLY  
Figure 31. Cleaning Foam Element  
page 28 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mainTenanCe  
BATTERY (gA6hEB)  
NOTICE  
This unit is of negative ground dO NOT connect in reverse.  
Always maintain battery fluid level between the specified  
marks. Battery life will be shortened, if the fluid levels are  
not properly maintained. Add only distilled water when  
replenishment is necessary.  
AlWAYs disconnect the negative terminal first and  
reconnect negative terminal last.  
When connecting battery do the following:  
1. NEvER use worn or damaged battery cables.Replace  
defective battery cables immediately.  
Check to see whether the battery cables are loose. Poor  
contact may result in poor starting or malfunctions. Always  
keep the terminals firmly tightened. Coating the terminals  
with an approved battery terminal treatment compound  
will help prevent corrosion. Replace battery with only  
recommended type battery.  
2. Place a small amount of battery terminal treatment  
compound around both battery terminals. This will  
ensure a good connection and will help prevent  
corrosion around the battery terminals.  
NOTICE  
The battery is sufficiently charged if the specific gravity  
of the battery fluid is 1.28 (at 68° F). If the specific gravity  
should fall to 1.245 or lower, it indicates that the battery is  
dead and needs to be recharged or replaced.  
If the battery cables are connected incorrectly, electrical  
damage to the generator will occur.Pay close attention  
to the polarity markings on the battery when connecting  
the battery cables.  
Before charging the battery with an external electric source,  
be sure to disconnect the battery cables.  
pOlARiTY  
BATTERY CABlE iNsTAllATiON  
The polarity of the battery is extremely important.When an  
inverted circuit connection takes place, the circuit will be in  
short circuit instantaneously resulting in possible damage  
to the control box electronics and starter.  
NOTICE  
Inadequate battery cable connections may cause poor  
starting of the generator, and create other malfunctions..  
When connecting the battery cables to the battery terminals  
be sure to check the polarity.  
AlWAYsbe sure the battery cables are properly connected  
to the battery terminals (Figure 30). The red cable is  
connected to the positive terminal of the battery, and the  
black cable is connected to the negative terminal of the  
TEsTiNgThE gFCi mOdulE  
If tripping of the main circuit breaker persists after a load is  
replaced with a known good one (no short circuit), perform  
this test with no load.  
battery.  
NEGATIVE  
POSITIVE  
1. Start the generator as outlined in the start up procedure  
in this manual.  
2. Place the main circuit breaker (Figure 35) in the ON  
position.  
ON  
OFF  
Figure 34. Battery Connections  
Figure 35. Circuit Breaker ON (GFCI Test)  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
mainTenanCe  
3. On the GFCI module (Figure 36), verify that the green  
POWER LED is ON.  
240  
120  
V
F
A
U
L
P
O
W
E
Figure 39. AC Voltmeter (Zero Volts)  
T
R
8. To restore power, press the RESET button (Figure 40)  
on the GFCI module and verify that the red FAULT LED  
turns OFF and the green POWER LED should turn ON  
GREEN  
POWER  
LED  
MANUAL RESET  
Figure 36. GFCI Module (Green LED ON)  
4. Also verify that the AC voltmeter is registering a voltage  
reading as indicated by Figure 41.  
F
A
U
L
P
O
W
E
T
R
5. Next, press the TEsT button on the GFCI module and  
verify that the green POWER LED turns OFF and the  
red FAULT LED turns ON.  
GREEN  
POWER  
LED  
PRESS  
MANUAL RESET  
Figure 40. GFCI Module (Green LED ON Reset)  
PRESS  
9. Verify that the AC voltmeter is registering a voltage  
reading as indicated by Figure 41.  
F
A
U
L
P
O
W
E
T
R
RED  
FAULT  
LED  
240  
MANUAL RESET  
120  
V
Figure 37. GFCI Module (Red/Fault LED ON)  
6. Also verify that the main circuit breaker switch trips to  
the OFF position.  
Figure 41. AC Voltmeter (120/240V)  
NOTICE  
ON  
It is recommended that the GFCI unit be tested when  
the generator is initially taken out of the box.Then, the  
generator should be tested daily at startup.  
OFF  
CAuTiON  
Figure 38. Circuit Breaker OFF (GFCI Test)  
The GFCI module is designed to interrupt power when  
a ground fault exists to prevent injuries and shock  
hazards. dONOToperate the generator if this test fails.  
Consult a qualified electrician for repair or replacement  
of the GFCI module.  
7. Verify that the AC voltmeter (Figure 39) on the  
generator reads zero volts.  
pAgE 30 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
noTes  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeneRaToR wiRinG DiaGRam (Ga6Hb)  
GENERATOR  
ENGINE  
DESIGNATION  
SYMBOL  
Ar  
ARMATURE WINDING  
ROTOR ASSEMBLY  
Fg-P, N  
EXCITATION WINDING  
EXCITATION WINDING  
AC VOLTMETER 120/240V  
Ex W1  
Ex W2  
V
~
RECTIFER  
RE 1~2  
4
2
3
1
1
2
CIRCUIT BREAKER 23A  
CB  
W R  
CN2  
COLOR CODE  
RECEPTACLE L5-20R 20A, 125V  
CON 1  
CN1  
CN3  
WIRE COLOR  
WIRE COLOR  
CON 2  
CON 3  
RECEPTACLE L5-30R 30A 125V  
RED  
BLACK  
B
L
R
W
BLUE  
WHITE  
RECEPTACLE L14-30R 30A, 125/250V  
BR BROWN  
Y
YELLOW  
1
2
4
4
3
2
1
3
RECEPTACLE 5-20R GFCI 20A, 125V  
FULL POWER SWITCH  
CON 4,5  
GREEN  
G
LB  
LG  
O
LIGHT BLUE  
LIGHT GREEN  
ORANGE  
GRAY  
VIOLET  
PINK  
GR  
V
CN5  
CN4  
SW1  
SW2  
IDLE CONTROL SWITCH  
P
CONNECTOR ARRANGEMENT  
(VIEW FROM INSERTING WIRE SIDE)  
OPERATION SWITCH  
SW3  
RC  
IDLE CONTROL DEVICE  
IDLE CONTROL SOLENOID  
CAPACITOR  
S
C
GFCI SENSING MODULE  
22  
TERMINAL BOARD  
Figure 42. Generator Wiring Diagram (GA6HB)  
pAgE 32 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GeneRaToR wiRinG DiGRam (Ga6Heb)  
GENERATOR  
ENGINE  
SYMBOL  
Ar  
DESIGNATION  
ARMATURE WINDING  
ROTOR ASSEMBLY  
Fg-P, N  
EXCITATION WINDING  
EXCITATION WINDING  
AC VOLTMETER 120/240V  
Ex W1  
Ex W2  
V
~
RECTIFER  
RE 1~2  
4 3  
A
J
2
1
B C K  
W R  
CN2  
CIRCUIT BREAKER 23A  
CB  
COLOR CODE  
RECEPTACLE L5-20R 20A, 125V  
CON 1  
CN1  
CN3  
WIRE COLOR  
WIRE COLOR  
RED  
BLACK  
B
L
R
W
CON 2  
CON 3  
RECEPTACLE L5-30R 30A 125V  
BLUE  
WHITE  
4
1
5 6  
2 3  
6
5 4  
2 1  
J
A
RECEPTACLE L14-30R 30A, 125/250V  
BR BROWN  
Y
YELLOW  
1
2
3
K C B  
GREEN  
G
LB  
LG  
O
LIGHT BLUE  
LIGHT GREEN  
ORANGE  
RECEPTACLE 5-20R GFCI 20A, 125V  
FULL POWER SWITCH  
CON 4,5  
GRAY  
VIOLET  
PINK  
GR  
V
CN4  
CN5  
CN6  
CN7  
SW1  
SW2  
SW3  
SW4  
RC  
IDLE CONTROL SWITCH  
P
CONNECTOR ARRANGEMENT  
(VIEW FROM INSERTING WIRE SIDE)  
OPERATION SWITCH  
STARTER SWITCH  
IDLE CONTROL DEVICE  
IDLE CONTROL SOLENOID  
S
C
CAPACITOR  
GFCI SENSING MODULE  
22  
TERMINAL BOARD  
Figure 43. Generator Wiring Diagram (GA6HEB)  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRoublesHooTinG (enGine)  
Troubleshooting (Engine)  
possible problem  
Spark plug bridging?  
symptom  
solution  
Check gap, insulation or replace spark plug.  
Clean or replace spark plug.  
Carbon deposit on spark plug?  
Short circuit due to deficient spark plug  
insulation?  
Check spark plug insulation, replace if worn.  
Improper spark plug gap?  
Fuel reaching carburetor?  
Water in fuel tank?  
Set to proper gap.  
Check fuel line.  
Flush or replace fuel tank.  
Replace fuel filter.  
Fuel filter clogged?  
Stuck carburetor?  
Check float mechanism.  
Check transistor ignition unit.  
Difficult to start, fuel is available, but no spark at  
spark plug.  
Spark plug is red?  
If insufficient compression, repair or replace  
engine. If injected air leaking, correct leak. If  
carburetor jets clogged, clean carburetor.  
Spark plug is bluish white?  
Check transistor ignition unit is broken, and  
replace defective unit. Check if voltage cord  
cracked or broken and replace. Check if spark  
plug if fouled and replace.  
No spark present at tip of spark plug?  
No oil?  
Add oil as required.  
Oil pressure alarm lamp blinks upon starting? (if Check automatic shutdown circuit, "oil sensor".  
applicable)  
(if applicable)  
ON/OFF switch is shorted?  
Check switch wiring, replace switch.  
Replace ignition coil.  
Ignition coil defective?  
Difficult to start, fuel is available, and spark is  
present at the spark plug.  
Improper spark gap, points dirty?  
Condenser insulation worn or short circuiting?  
Spark plug wire broken or short circuiting?  
Set correct spark gap and clean points.  
Replace condenser.  
Replace defective spark plug wiring.  
Flush fuel system, replace with correct type of  
fuel.  
Wrong fuel type?  
Difficult to start, fuel is available, spark is  
present and compression is normal.  
Water or dust in fuel system?  
Air cleaner dirty?  
Flush fuel system.  
Clean or replace air cleaner.  
Close choke.  
Choke open?  
Suction/exhaust valve stuck or protruded?  
Piston ring and/or cylinder worn?  
Reseat valves.  
Replace piston rings and/or piston.  
Difficult to start, fuel is available, spark is  
present and compression is low.  
Cylinder head and/or spark plug not tightened  
properly?  
Torque cylinder head bolts and spark plug.  
Head gasket and/or spark plug gasket damaged?  
No fuel in fuel tank?  
Replace head and spark plug gaskets.  
Fill with correct type of fuel.  
Apply lubricant to loosen fuel cock lever,  
replace if necessary.  
Fuel cock does not open properly?  
No fuel present at carburetor.  
Fuel filter/lines clogged?  
Fuel tank cap breather hole clogged?  
Air in fuel line?  
Replace fuel filter.  
Clean or replace fuel tank cap.  
Bleed fuel line.  
pAgE 34 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRoublesHooTinG (enGine)  
Troubleshooting (Engine) - continued  
possible problem  
Air cleaner dirty?  
symptom  
solution  
Clean or replace air cleaner.  
Check float adjustment, rebuild carburetor.  
Clean or replace spark plug.  
Set to proper gap.  
Improper level in carburetor?  
Defective spark plug?  
Weak in power, compression is proper and  
does not misfire.  
Improper spark plug?  
Flush fuel system and replace with correct  
type of fuel.  
Water in fuel system?  
Weak in power, compression is proper but  
misfires.  
Dirty spark plug?  
Clean or replace spark plug.  
Replace ignition coil.  
Ignition coil defective?  
Spark plug heat value incorrect?  
Wrong type of fuel?  
Replace with correct type of spark plug.  
Replace with correct type of fuel.  
Clean cooling fins.  
Cooling fins dirty?  
Engine overheats.  
Clear intake of dirt and debris. Replace air  
cleaner elements as necessary.  
Intake air restricted?  
Oil level too low or too high?  
Governor adjusted incorrectly?  
Governor spring defective?  
Fuel flow restricted?  
Adjust oil to proper level.  
Adjust governor.  
Rotational speed fluctuates.  
Replace governor spring.  
Check entire fuel system for leaks or clogs.  
Recoil mechanism clogged with dust and dirt? Clean recoil assembly with soap and water.  
Recoil starter malfunctions. (if applicable)  
Spiral spring loose?  
Replace spiral spring.  
Ensure tight, clean connections on battery  
and starter.  
Loose, damaged wiring?  
Starter malfunctions.  
Battery insufficiently charged?  
Recharge or replace battery.  
Replace starter.  
Starter damaged or internally shorted?  
Check and clean valves. Check muffler and  
replace if necessary.  
Over-accumulation of exhaust products?  
Wrong spark plug?  
Burns too much fuel.  
Replace spark plug with manufacturer's  
suggested type.  
Lubricating oil is wrong viscosity?  
Worn rings?  
Replace lubricating oil with correct viscosity.  
Replace rings.  
Exhaust color is continuously "white".  
Air cleaner clogged?  
Clean or replace air cleaner.  
Adjust choke valve to correct position.  
Choke valve set to incorrect position?  
Carburetor defective, seal on carburetor  
broken?  
Exhaust color is continuously "black".  
Replace carburetor or seal.  
Poor carburetor adjustment, engine runs too  
rich?  
Adjust carburetor.  
ON/OFF device not activated ON?  
Battery disconnected or discharged?  
Ignition switch/wiring defective?  
Turn on ON/OFF device.  
Check cable connections. Charge or replace  
battery  
Will not start, no power with key "ON". (if  
applicable)  
Replace ignition switch. Check wiring.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRoublesHooTinG (GeneRaToR)  
Troubleshooting (generator )  
symptom  
possible problem  
Engine speed too low?  
AC voltmeter not working?  
solution  
Raise engine speed to rated RPM.  
Replace Ac voltmeter.  
Low voltage  
Control box internal wiring  
malfunction?  
Check control box wiring.  
Check red and green ignition wires.  
Replace ignition wires if necessary.  
Defective ignition coil?  
Low voltage. Engine speed normal  
3650 RPM (unloaded), 2500 RPM  
(idle)  
Rotor winding malfunction?  
Stator winding malfunction?  
Leakage breaker malfunction?  
Check or replace rotor.  
Check or replace stator.  
Check or replace CB1.  
Check full power switch and full power  
switch circuit.  
Full power switch malfunction?  
Engine speed too high?  
Voltage output too high.  
Lower engine speed to rated RPM.  
Voltage output too high. Engine speed  
normal 3650 RPM (unloaded), 2500  
RPM (idle)  
Control box internal wiring  
malfunction  
Check control box wiring.  
Circuit breaker will not turn on "NO  
LOAD"  
Defective circuit breaker?  
Replace circuit breaker.  
Check control box wiring.  
Replace circuit breaker.  
Voltage output too high. Engine speed  
normal 3650 RPM (unloaded), 2500  
RPM (idle)  
Control box internal wiring  
malfunction  
Circuit breaker will not turn on "NO  
LOAD"  
Defective circuit breaker?  
Overload Condition?  
Reduce load or replace breaker.  
Check load circuit for short.  
Circuit breaker will turn on "LOADED"  
but trips immediately.  
Load circuit is shorted?  
Stuck solenoid?  
Check solenoid.  
Does not accelerate from low to high  
"NO LOAD"  
Bad Idle control switch?  
Idle control switch malfunction?  
Check or replace idle control switch.  
Check or replace idle control switch.  
Check or replace idle control device.  
Does not accelerate from low to high Idle control device malfunction?  
"LOAD ACTIVE"  
Control box interal wiring  
defective?  
Check control box wiring.  
Defective rotor windings?  
Check or replace rotor.  
Defective solenoid?  
Check or replace solenoid.  
Does not decelerate no"VOLTAGE  
OUTPUT".  
Defective idle control device?  
Defective solenoid?  
Check or replace idle control device.  
Check or replace idle control device.  
Check control box wiring, replace any  
defective components.  
Control box wiring malfunction?  
Does not decelerate but has  
"VOLTAGE OUTPUT".  
Defective solenoid?  
Check or replace solenoid.  
Idle control device malfunction?  
Check or replace idle control device.  
pAgE 36 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
noTes  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
eXPlanaTion of CoDe in RemaRks Column  
The following section explains the different symbols and  
QTY. Column  
remarks used in the Parts section of this manual. Use the  
help numbers found on the back page of the manual if there  
are any questions.  
Numbers used — Item quantity can be indicated by a  
number, a blank entry, or A/R.  
A/R (As Required) is generally used for hoses or other  
parts that are sold in bulk and cut to length.  
NOTICE  
The contents and part numbers listed in the parts  
section are subject to change withoutnotice.Multiquip  
does not guarantee the availability of the parts listed.  
A blank entry generally indicates that the item is not sold  
separately.Other entries will be clarified in the “Remarks”  
Column.  
sAmplE pARTs lisT  
REmARks Column  
NO. pART NO. pART NAmE  
QTY. REmARks  
Some of the most common notes found in the “Remarks”  
Column are listed below. Other additional notes needed  
to describe the item can also be shown.  
1
2%  
12345  
BOLT .....................1 .....INCLUDES ITEMS W/%  
WASHER, 1/4 IN. ..........NOT SOLD SEPARATELY  
WASHER, 3/8 IN. ..1 .....MQ-45T ONLY  
2% 12347  
3
4
12348  
12349  
HOSE ..................A/R ...MAKE LOCALLY  
BEARING ..............1 .....S/N 2345B AND ABOVE  
Assembly/kit — All items on the parts list with the  
same unique symbol will be included when this item is  
purchased.  
NO. Column  
Indicated by:  
unique symbols — All items with same unique symbol  
(@, #, +, %, or >) in the number column belong to the  
same assembly or kit, which is indicated by a note in the  
“Remarks” column.  
“INCLUDES ITEMS W/(unique symbol)”  
serial Number Break — Used to list an effective serial  
number range where a particular part is used.  
duplicateitem Numbers — Duplicate numbers indicate  
multiple part numbers, which are in effect for the same  
general item, such as different size saw blade guards in  
use or a part that has been updated on newer versions  
of the same machine.  
Indicated by:  
“S/N XXXXX AND BELOW”  
“S/N XXXX AND ABOVE”  
“S/N XXXX TO S/N XXX”  
specific model Number use — Indicates that the part  
is used only with the specific model number or model  
number variant listed. It can also be used to show a  
part is NOT used on a specific model or model number  
variant.  
NOTICE  
When ordering a part that has more than one item  
number listed, check the remarks column for help in  
determining the proper part to order.  
Indicated by:  
pART NO. Column  
“XXXXX ONLY”  
“NOT USED ON XXXX”  
Numbers used — Part numbers can be indicated by a  
number, a blank entry, or TBD.  
“make/Obtain locally” — Indicates that the part can  
be purchased at any hardware shop or made out of  
available items.Examples include battery cables, shims,  
and certain washers and nuts.  
TBD (To Be Determined) is generally used to show a  
part that has not been assigned a formal part number  
at the time of publication.  
A blank entry generally indicates that the item is not sold  
separately or is not sold by Multiquip. Other entries will  
be clarified in the “Remarks” Column.  
“Not sold separately”— Indicates that an item cannot  
be purchased as a separate item and is either part of an  
assembly/kit that can be purchased, or is not available  
for sale through Multiquip.  
pAgE 38 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
suGGesTeD sPaRe PaRTs  
ga6HB/ga6HeB pORTABlE 60 hz gENERATOR  
WiTh hONdAgX340R2EdN2/gX340R2EdE2  
gAsOliNE ENgiNEs  
1 to 3 units  
Qty.  
1............0430430120..........CAP FUEL TANK  
p/N  
description  
1............0605505162..........FILTER FUEL  
2............3015419604..........RUBBER SUSPENSION  
2............1725419214..........RUBBER SUSPENSION  
3............9807955846..........SPARK PLUG  
1............35480ZF6003 .......SWITCH ASSY., OIL ALERT  
2............28462ZV7003.......ROPE, RECOIL  
3............17211899000........ELEMENT AIR CLEANER  
NOTICE  
Part numbers on this Suggested Spare Parts list may  
supersede/replace the part numbers shown in the  
following parts lists.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb— namePlaTe anD DeCals assy.  
DANGER  
Using generator indoors CAN KILL YOU IN MINUTES.  
Utilser un générateur  
GA6HB  
GA6HEB  
OPERATING INSTRUCTIONS  
a
à
l’ intérieur VOUS TUERA EN QUELQÙES MINUTES.  
Exhaust contains carbon monoxide,  
Les gaz d’ échappement contiennent du monoxyde de carbon, un gaz toxique  
invisible et inodore.  
a
poison gas you cannot see or smell.  
OPERATING INSTRUCTIONS  
1. Before starting check the oil and fuel level.  
2. Switch the circuit breaker to the “OFF” position.  
3. Open the fuel valve.  
1. Before starting check the oil and fuel level.  
2. Switch the circuit breaker to the “OFF” position.  
3. Open the fuel valve.  
.
1
2
    A
V
V
1
2
0
L
A
T
R
L
B
S
   A
D
  O
F
  A
  E
GC2.2H  
1
A
0
V
1
2
0
U
R
  E
   L
B
S
A
D
  S
  A
  E
E
y
E
y
L
A
E
   U
   R
2
1
5
H
o
n
d
a
E
n
g
n
e
s
I
    T
 E
 R
   U
   P
T
E
U
R
D
E
2
1
H
o
n
d
a
E
n
g
i
e
s
G
         T
E
  E
E
C
   O
 U
 R
 A
 N
 T
    R
I
 C
   I
A
L
G
R
         T
E
  I
  E
E
I
 E
 R
 N
   U
   P
T
I
U
R
   I
D
L
GAC-2.2H  
1
2
    A
V
V
1
2
0
N
L
A
T
R
A
L
B
O
S
   A
E
D
  M
  O
   O
  R
         E
  M
  E
P
O
W
E
R
E
D
b
y
2
1
5
H
o
n
d
a
E
n
g
i
n
e
s
I
    T
 E
 R
   U
   P
T
E
U
R
D
E
G
R
         T
  R
  I
  E
   D
E
C
   O
 U
 R
 A
 N
 T
    R
I
 C
   I
A
L
4. Pull the choke knob.  
4. Pull the choke knob.  
3
5. Turn the operation switch to the “ON” position  
and push the start button to start the engine.  
6. After the engine starts, gradually push in the choke knob.  
7. Run the generator for 3-5 minutes without load.  
8. Check for any abnormal noise or smell.  
9. Switch the circuit breaker to the “ON” position.  
10.When stopping, cut-off the load and allow the unit  
to cool for 2-3 minutes before stopping engine.  
11.Turn the operation switch to the “OFF” position.  
12. After the engine completely stops, close the fuel valve.  
5. Turn the operation switch to the “ON” position.  
6. Pull the recoil starter.  
ONLY use outdoors and away from  
open windows, doors, and vents.  
NEVER use in enclosed or partially  
enclosed areas.  
Utilisation UNIQUEMENT  
portes et trous d’ aération  
à
l’ extér leur  
7. After the engine starts, gradually push in the choke knob.  
8. Run the generator for 3-5 minutes without load.  
9. Check for any abnormal noise or smell.  
10.Switch the circuit breaker to the “ON” position.  
11.When stopping, cut-off the load and allow the unit  
to cool for 2-3 minutes before stopping engine.  
12.Turn the operation switch to the “OFF” position.  
13. After the engine completely stops, close the fuel valve.  
Utilisation INTERDITE dans un  
espace clos ou partiellement clos.  
1
2
A90400001  
A55100000  
A92120010  
4
WARNING  
Operation of this equipment may create  
sparks that can start fires around dry  
vegetation.  
A spark arrestor may be required.  
The operator should contact local fire  
agencies for laws or regulation relating  
to fire prevention requirements.  
A91110010  
DANGER  
THE POSSIBILITY EXISTS OF ELECTROCUTION IF  
GENERATOR/WELDER IS NOT PROPERLY GROUNDED.  
ALWAYS CONNECT EARTH GROUND (GROUND  
ROD) TO GENERATOR GROUND POINT.  
5
6
S-1123  
0N  
ON  
V
120  
OFF  
OFF  
IDLE  
CONTROL  
6000  
120V  
OFF  
21A  
OP  
 S
E
R
I
T
T
I
 H
N
AC CIRCUIT  
BREAKER  
120V/240V  
20A  
FULL POWER  
SWITCH  
GA-6H  
120/240V  
30A  
120V  
30A  
GROUND  
SCREW  
20A  
GROUND  
CABLE  
#8 MINIMUM  
GROUND ROD  
FOR EARTH  
GROUND  
CONNECT TO  
BUILDING  
GROUND  
IF REQUIRED  
8
FT. MINIMUM  
FOR FURTHER GROUNDING  
GA-6HEB  
ELECTRIC START  
0N  
V
120  
INSTRUCTIONS, READ MANUAL  
120  
OFF  
P
F
A
U
L
REFERENCE  
O
W
E
NEC 250-52(C)  
IDLE  
CONTROL  
R
T
AC VOLTMETER  
120V  
OPERATION  
SWITCH  
D9531100104  
120/240V  
30A  
120  
120  
MANUAL RESET  
30A  
20A  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120V  
120V/240V  
FULL POWER  
SWITCH  
START  
SWITCH  
120  
V
120  
V
20A  
20A  
CAUTION  
IN SIMULTANEOUS USE 30 AMP MAX  
DANGER  
Do not touch output terminals or  
WARNING  
OPERATE AT  
3600 RPM ONLY  
(FULL THROTTLE)  
internal wiring while unit is operating.  
To avoid injury,  
you MUST read  
and understand  
operator’s manual  
before using this  
machine.  
Turn off power before servicing.  
S-4985  
Only qualified personnel should  
install, use or service this  
equipment.  
ELECTRICAL  
SHOCK  
DAMAGE MAY RESULT IF  
OPERATED AT LOWER SPEEDS  
HAZARD  
WARNING  
Only operate machine in well ventilated  
This machine to  
be operated by  
qualified  
WARNING  
7
B
g
e
e
e
e
f
n
o
r
e
c
o
n
n
e
c
t
n
i
n
g
b u  
t
h
l
i
d
s
i
e
r
a
i
t
o
r
t
o
a
y
i
n
e
l
g
n
a
’
s
areas.  
l
e
e
c
t
r
c
c
a
l
a
(
s
y
m
s
t
e
m
,
n
a
l
i
c
s
n
e
d
DO NOT inhale exhaust gases.  
l
c
t
a
r
i
i
n
n
t
u
n
s
t
i
e
s
t
a
w
l
i
personnel only.  
i
Only qualified personnel should  
s
o
l
t
i
o
r
a
s
f
r
)
s
t
c
h
.
S-4984  
Ask for training  
as needed.  
S e  
e
r
i
u
t
o
l
u
s
w
.
i
n
j
u
r
u
y
t
o
r
d
s
e
t
a
r
t
a
h
n
m
f
a
e
y
instaqllu,aulifsieed poerrssoennrevlischeoutlhd is  
Only  
install, use or service this  
equipment.  
DANGEROUS  
GAS  
r
s
t
h
i
t
h
o
t
h
i
s
r
s
w
i
c
equipment.  
A91110010  
BATTERY  
CAPACITY  
CONNECTION  
12V 26 Ah  
(+) STARTER  
(-) EARTH  
FUEL COCK  
ON  
9
KEEP COVER ON THE BATTERY  
WHEN DURING OPERATION.  
S-1237  
ON  
8
S-3704  
GA-6H  
11  
AIR CLEANER MAINTENANCE  
CLEAN ELEMENT EVERY 50 HOURS (EVERY  
10 HOURS UNDER DUSTY CONDITIONS.  
WASH IN HIGH FLASH-POINT SOLEVENT  
SQUEEZE DRY, THE DIP IN CLEAN ENGINE  
OIL AND SQUEEZE OUT EXCESS OIL.  
10  
13  
S-2091  
12  
S-2090  
14  
15  
16  
ON  
GA-6HB  
GA-6HEB  
0N  
0N  
OFF  
OFF  
OFF  
0N  
IDLE  
AC VOLTMETER  
IDLE  
CONTROL  
AC VOLTMETER  
120V  
CONTROL  
OPERATION  
SWITCH  
OFF  
120V  
OPERATION  
SWITCH  
120/240V  
30A  
120  
30A  
120/240V  
30A  
120  
30A  
120  
120  
20A  
20A  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
AC CIRCUIT BREAKER  
GFCI PROTECTED  
120V  
120V/240V  
120V  
120V/240V  
FULL POWER  
FULL POWER  
SWITCH  
SWITCH  
START SWITCH  
120  
V
120  
V
120  
V
120  
V
20A  
20A  
20A  
20A  
IN SIMULTANEOUS USE 30 AMP MAX  
IN SIMULTANEOUS USE 30 AMP MAX  
A51120230  
A511202002  
pAgE 40 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb— namePlaTe anD DeCals assy.  
NO.  
1
2
3
4
5
6
7
8
pART NO.  
pART NAmE  
QTY.  
REmARks  
A5551000004  
A9521200104  
A9504000014  
920214100  
DECAL; OPERATING INSTRUCTIONS (HEB)..1................A55100000  
DECAL; OPERATING INSTRUCTIONS (HB)....1................A92120010  
DECAL; DANGER, DANGEROUS GASES .......1................A90400001  
DECAL; WARNING, START FIRES ...................1................M90420000  
DECAL; DANGER, ELECTROCUTION .............1................A93110010  
DECAL; GROUND, (S-1123) .............................1................REPLACES P/N W0800628504  
DECAL; WARNING............................................1................A91110010  
DECAL; FUEL COCK.........................................1................S-3704  
D9531100104  
0800628504  
A9511100103  
1980680004  
0800696804  
87533ZC0630  
A5561000603  
0800689404  
0800689504  
87528898620  
A5511202002  
A5511202302  
9
DECAL; BATTERY (S-1237)..............................1................REPLACES P/N 0800696604  
DECAL; AIR CLEANER  
DECAL; MQ POWER, GA-6H  
DECAL; + (POSITIVE).......................................1................S-2090  
DECAL; - (NEGATIVE).......................................1................S-2091  
DECAL; CHOKE  
10  
11  
12  
13  
14  
15  
16  
1
1
1
DECAL; CONTROL PANEL (HB).......................1................A51120200  
DECAL; CONTROL PANEL (HEB) ....................1................A51120230  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb — GeneRaToR assy.  
pAgE 42 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb — GeneRaToR assy.  
NO.  
1
pART NO.  
7901002403  
pART NAmE  
ROTOR ASSY. ...................................................1................INCLUDES ITEMS W/#  
QTY.  
REmARks  
1-1#  
FIELD ASSY .....................................................1................NOT SOLD SEPARATELY  
1-2# 0601823213  
0601822638  
1-3# 0071706304  
RECTIFIER D3SB80  
SURGE ABSORBER  
BEARING 6304  
SET BOLT, ROTOR  
SET WASHER, BEARING  
ARMATURE ASSY.  
END BRACKET  
2
2
1
1
1
1
1
4
4
2
7901017004  
0801086104  
A5135000103  
7901315502  
0013608020  
0040008000  
7871315022D  
7875021523  
7871331003  
7901316004  
7871329514  
0601851760  
3
4
5
6
HEX. HEAD BOLT  
WASHER, LOCK  
6A  
7
8
END BRACKET ................................................1................REPLACES P/N 7871315022  
GUIDE PANEL, AIR  
COVER  
SET BOLT, STATOR  
GROMMET  
CAP  
1
1
4
1
1
9
10  
11  
12  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/GaGHeb — ConTRol boX assy.  
pAgE 44 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6HbGa6Heb — ConTRol boX assy.  
NO.  
1
2
3
4
5
6
6A  
7
8
pART NO.  
pART NAmE  
CONTROL BOX  
GROMMET  
RECTIFIER S5VB60  
MACHINE SCREW  
SLOW DOWN UNIT  
MACHINE SCREW  
QTY.  
REmARks  
A3214000103  
0601850102  
0601823204  
0027103012  
0601823853  
0027104010  
OEMAA8  
1
1
2
2
1
2
HEX. NUT .........................................................2................REPLACES P/N 0207004000  
A3224000303  
0601806819  
0601814065  
0601811092  
0601811031  
0601812529  
0021004010  
OEMAA8  
0601830737  
0601831620  
0601831620  
0601830737  
A3262800004  
011106015  
0017105010  
0601872301  
0021003005  
0601829301  
0601815870  
0021004020  
OEMAA8  
CONTROL PANEL  
AC VOLTMETER, DE450, 0~240V  
RECEPTACLE, 5-20R DR20 (GFCI)  
RECEPTACLE, L5-20R, 125V, 20A ...................1................REPLACES P/N 0601812592  
RECETPACLE, L5-30R, 125V, 30A ...................1................REPLACES P/N 0601811035  
RECEPTACLE, L14-30R  
MACHINE SCREW  
HEX. NUT ........................................................10...............REPLACES P/N 0207004000  
FULL POWER SWITCH  
IDLE CONTROL SWITCH  
OPERATION SWITCH  
OPERATION SWITCH  
CAPACITOR 50V @1000 F  
1
1
2
9
10  
11  
12  
13  
13A  
14  
15  
16  
16A  
17  
18  
19  
20  
21  
22  
23  
24  
24A  
25  
25A  
25B  
1
10  
1
1
1
1
1
HEX. HEAD BOLT..............................................4................REPLACES P/N 0017106015  
HEX. HEAD BOLT  
CIRCUIT BREAKER, 23A, 2P @120V  
MACHINE SCREW  
EARTH LEAKAGE RELAY, 120V  
TERMINAL BOARD  
MACHINE SCREW  
HEX. NUT .........................................................2................REPLACES P/N 0207004000  
MACHINE SCREW  
HEX. NUT  
4
1
4
1
1
2
Y0027004025  
0030004000  
58042  
1
3
WASHER, FLAT.................................................5................REPLACES P/N 0041204000  
25C 0040004000  
WASHER, LOCK  
START SWITCH, GA6HEB  
FUSE, 10A  
3
1
26  
27  
0602100102  
0601802137  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb — PiPe fRame assy.  
pAgE 46 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6HbGa6Heb — PiPe fRame assy.  
NO.  
1
1A  
2
3
4
5
6
7
8
pART NO.  
pART NAmE  
QTY.  
REmARks  
A5417000702  
A5417000802  
A3417100004  
0017106015  
7905443003  
3015419604  
1725419214  
0207008000  
0017108030  
0017108040  
020108060  
PIPE FRAME, GA6HB  
PIPE FRAME, GA6HEB  
BRACKET  
1
1
1
4
1
2
2
HEX. HEAD BOLT  
BASE  
RUBBER SUSPENSION  
RUBBER SUSPENSION  
HEX. NUT ..........................................................8................REPLACES P/N 0207008000  
HEX. HEAD BOLT  
HEX. HEAD BOLT  
HEX. NUT ..........................................................2................REPLACES P/N 0207008000  
FUEL TANK  
CAP, FUEL TANK ..............................................1................REPLACES P/N 0605505068  
FUEL FILTER  
FUEL GAUGE  
FUEL STRAINER  
2
2
9
9A  
10  
11  
12  
13  
14  
A3361000004  
0430430120  
0605505162  
0602125034  
16950ZB4015  
1
1
1
1
14-1 16952KJ9752  
SCREEN SET....................................................1................REPLACES P/N 16952ZB4005  
HOSE  
HOSE BAND .....................................................2................REPLACES P/N 0605515241  
15  
16  
17  
18  
19  
20  
21  
22  
23  
23A  
24  
25  
25A  
25B  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
0605513212  
950024080008  
7855525514  
7855525604  
0017108030  
011008020  
A9117200103  
0601850097  
011208025  
1
RUBBER CUSHION  
COLLAR  
HEX. HEAD BOLT  
2
2
2
HEX. HEAD BOLT..............................................2................REPLACES P/N 0017108020  
HANGER  
STOPPER  
1
1
MACHINE SCREW............................................1................REPLACES P/N 0021008025  
HEX. NUT ..........................................................1................REPLACES P/N 0207008000  
020108060  
0601851116  
011208025  
020108060  
0042108000  
0019206015  
7915456004  
011106015  
7915455103  
7855455003  
011106015  
0605507002  
0605513202  
0605513210  
0605513189  
0605515223  
A3261600103  
A3261600204  
011106015  
PLASTIC WASHER  
2
HEX. HEAD BOLT..............................................2................REPLACES P/N 0011308025  
HEX. NUT ..........................................................2................REPLACES P/N 0037908000  
WASHER, FLAT  
HEX. HEAD BOLT  
STOPPER  
2
1
1
HEX. HEAD BOLT..............................................2................REPLACES 0017106015  
COVER  
COVER  
1
1
HEX. HEAD BOLT..............................................6................REPLACES P/N 0017106015  
CANISTER  
HOSE  
HOSE  
1
1
1
1
4
1
1
HOSE  
HOSE BAND  
BRACKET  
STOPPER  
HEX. HEAD BOLT..............................................3................REPLACES 0016906015  
0605515170  
Y0605515229  
HOSE BAND  
HOSE BAND  
1
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Heb — baTTeRy assy.  
pAgE 48 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Heb — baTTeRy assy.  
NO.  
32  
pART NO.  
pART NAmE  
BATTERY...........................................................1................PURCHASE LOCALLY  
QTY.  
REmARks  
33  
34  
35  
36  
37  
38  
38A  
39  
7905458103  
A5344200004  
0037806000  
0040006000  
0041206000  
A5347000504  
D1343200604  
A5347000004  
Y0602220643  
BATTERY BAND  
BATTERY BOLT  
WING NUT  
SPRING NUT  
WASHER, FLAT  
BATTERY CABLE, NEGATIVE  
TERMINAL CAP  
BATTERY CABLE, POSITIVE  
TERMINAL CAP  
1
2
2
2
2
1
1
1
1
38B  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb — muffleR assy.  
page 50 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga6Hb/Ga6Heb — muffleR assy.  
NO.  
1
2
3
4
5
6
7
8
pART NO.  
pART NAmE  
MUFFLER  
PROTECTOR  
PROTECTOR  
SEAL  
QTY.  
REmARks  
W7912310003  
18320ZC2000  
18325ZB4000  
18329ZB4000  
18355ZB4630  
Y0602322011  
0105050616  
18333ZB4801  
Y0602322010  
W7905461004  
011008020  
1
1
1
2
1
1
ARRESTOR, SPAR  
TAPPPING SCREW  
HEX. HEAD BOLT .............................................5................REPLACES P/N 0017106012  
GASKET  
HEX. HEAD BOLT  
BRACKET  
1
2
1
9
10  
11  
12  
13  
13A  
14  
15  
16  
16A  
17  
HEX. HEAD BOLT..............................................1................REPLACES P/N 0017108020  
BRACKET  
HEX. HEAD BOLT .............................................2................REPLACES P/N 0017108025  
HEX. NUT .........................................................2................REPLACES P/N 0207008000  
HEX. HEAD BOLT..............................................2................REPLACES P/N 0017108020  
W7905460004  
011208025  
020108060  
1
011008020  
W7905469004  
011206020  
020108060  
BRACKET  
1
HEX. HEAD BOLT .............................................1................REPLACES P/N 0017106020  
HEX. NUT .........................................................1................REPLACES P/N 0207008000  
HEX. HEAD BOLT..............................................4................REPLACES P/N 0017106012  
0105050616  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — aiR CleaneR assy.  
page 52 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — aiR CleaneR assy.  
NO.  
1
2
3
4
5
6
7
8
pART NO.  
pART NAmE  
TUBE BREATHER  
ELEMENT, AIR CLEANER  
CASE COMP, AIR CLEANER  
STAY, AIR CLEANER  
SPRING, AIR CLEANER CASE LID  
BASE COMP, AIR CLEANER  
SEAL AIR CLEANER CASE  
COVER, AIR CLEANER  
SEAL AIR CLEANER COVER  
COLLAR, AIR CLEANER  
BOLT, FLANGE, 5X18  
QTY.  
REmARks  
15721Z23H60  
17211899000  
17220Z23530  
17222Z23H60  
17223Z23000  
17223Z23S30  
17229Z23H60  
17231Z23H60  
17229Z23H60  
17238ZE7710  
90005ZM3000  
957010603208  
9405006000  
1
1
1
1
1
1
1
1
1
1
4
1
1
9
10  
11  
13  
13  
BOLT, FLANGE, 6X32  
BOLT, FLANGE, 6 MM  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CamsHafT assy.  
pAgE 54 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CamsHafT assy.  
NO.  
1
2
3
4
5
6
7$  
8
9
10  
11  
12  
13  
14  
15  
16  
17  
pART NO.  
pART NAmE  
SEAL VALVE STEM  
QTY.  
REmARks  
12209ZE8003  
14100Z5K810  
14410ZE3013  
14431ZE2010  
14441ZE2000  
14451ZE1013  
14568ZE1000  
14711Z5T000  
14721Z5T000  
14751ZE2003  
14771ZE2000  
14773ZE2000  
14775ZE2010  
14781ZE2000  
14791ZE2010  
90012ZE0010  
90206ZE1000  
1
CAMSHAFT ASSY.............................................1................INCLUDES ITEMS W/$  
ROD, PUSH  
ARM, VALVE ROCKER  
LIFTER VALVE  
PIVOT, ROCKER ARM  
SPRING, WEIGHT RETURN  
VALVE, IN.  
VALVE, EX.  
SPRING, VALVE  
RETAINER, INTAKE VALVE SPRING  
RETAINER, EXHAUST VALVE SPRING  
SEAT, VALVE SPRING  
ROTATOR, VALVE  
2
2
2
2
1
1
1
2
1
1
1
1
1
2
2
PLATE, PUSH ROD GUIDE  
BOLT, PIVOT (8MM)  
NUT, PIVOT ADJ.  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CaRbuReToR assy.  
page 56 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CaRbuReToR assy.  
NO.  
1$+♦♣@ 16010ZE3701  
pART NO.  
pART NAmE  
QTY.  
REmARks  
GASKET SET  
VALVE SET, FLOAT  
FLOAT SET  
1
1
1
2$  
3$  
4$%  
5$  
6$%@  
7$%  
8
16011ZA0931  
16013Z1C003  
16015ZA0931  
16016ZH7W01  
16024124760  
16028ZA0931  
16100Z8W701  
16124ZE0005  
16148141881  
16166ZE3F10  
16172ZE3W10  
16211Z9H700  
16221Z8T000  
16230ZE3702  
16260ZE3D22  
16261ZE2702  
16262ZE2711  
16263ZA0000  
16264ZE2701  
16265ZE2721  
16268ZE2721  
16269ZA0800  
16400ZE2704  
16611ZE3D21  
16613893000  
16615893000  
36135ZF6D41  
53149964003  
88911MJ3000  
90431ZE2700  
90432ZE2700  
90433ZE2700  
90434ZE2700  
90650SD9003  
93500050120A  
938920501218  
9405006000  
CHAMBER SET, FLOAT ...........................1................INCLUDES ITEMS W/@  
SCREW SET  
SCREW SET, DRAIN ................................1................INCLUDES ITEMS W/+  
SCREW SET B .........................................1................INCLUDES ITEMS W/♦  
CARBURETOR ASSY................................1................INCLUDES ITEMS W/$  
SCREW, THROTTLE STOP  
CAP, CHOKE LEVER DUST  
NOZZLE, MAIN  
1
9$  
1
1
1
1
1
1
1
10$  
11$  
12$  
14  
15  
17$  
18  
19#  
20#  
21#  
22#  
23#  
24#  
25  
26#  
27#  
28#  
29#  
30  
COLLAR, SETTING  
INSULATOR, CARBURETOR  
GASKET, INSULATOR  
VALVE ASSY., SOLENOID  
STAY ASSY., MANUAL CHOKE.................1................INCLUDES ITEMS W/#  
STAY, SOLENOID  
LEVER, CHOKE  
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
1
1
2
2
2
1
1
1
1
4
1
1
1
1
JOINT, ROD  
ROD, CHOKE  
STOPPER, CHOKE ROD  
SPRING, MANUAL CHOKE  
GASKET, AIR CLEANER  
DIAPHRAGM ASSY.  
ROD, CHOKE CONTROL  
GROMMET, CHOKE ROD  
GUIDE, CHOKE ROD  
VALVE, DASHPOT CHECK  
BUSH, ARM PIVOT  
GROMMET, FENDER  
WASHER, CHOKE LEVER  
SEAL, CHOKE LEVER  
WASHER, THRUST (2.7X8)  
COLLAR, LEVER  
CLIP, WIRE HARNESS  
SCREW, PAN (5X12)  
SCREW, WASHER (5X12)  
NUT, FLANGE (6MM)  
WASHER, FLASH (5MM)  
E-RING (2MM)  
31#  
32  
33#  
34#  
35#  
36#  
37  
39#  
40$  
41  
42#  
43#  
44#  
45#  
47  
9410305000  
9454002010  
9454004010  
9454007010  
9500202070  
E-RING (4MM)  
E-RING (7MM)  
CLIP, TUBE (B7)  
TUBE (3.5X75)  
TUBE (3.5X130)  
JET, MAIN (#95)  
JET, MAIN (#98)  
49  
50  
51$  
51$  
52$  
54  
950053507510  
950053513010  
99101ZH80950  
99101ZH80980  
99204ZE00380  
16212Z5T000  
JET, SET PILOT MAIN, (#38) ....................1................INCLUDES ITEMS W/♣  
GASKET, CARBURETOR INSULATOR  
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — ConTRol assy.  
page 58 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — ConTRol assy.  
NO.  
1
3
4
5
pART NO.  
pART NAmE  
ARM, GOVERNOR  
ROD, GOVERNOR  
SPRING, GOVERNOR  
SPRING, THROTTLE RETURN  
CONTROL ASSY................................................1................INCLUDES ITEMS W/$  
SPRING, CONTROL ADJUSTING  
BOLT, FLANGE 6X12  
QTY.  
REmARks  
16550ZE3700  
16555ZE3000  
16561ZK6D70  
16562ZE3700  
16570Z5T880  
16584883300  
90013883000  
90015ZE5010  
93500050350A  
9405006000  
1
1
1
1
8
16$  
20  
21  
28$  
30  
1
2
1
1
1
BOLT, GOVERNOR ARM  
SCREW, PAN (5X35)  
NUT, FLANGE (6MM)  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CRankCase CoVeR assy.  
page 60 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CRankCase CoVeR assy.  
NO.  
1
2
3
4
pART NO.  
pART NAmE  
COVER ASSY., CRANKCASE...........................1................INCLUDES ITEMS W/$  
PACKING CRANKCASE COVER  
CAP ASSY., OIL FILLER ...................................1................INCLUDES ITEMS W/%  
CAP ASSY., OIL FILLER ...................................1................INCLUDES ITEMS W/@  
QTY.  
REmARks  
11300ZE3040  
11381Z5T000  
15600ZG4003  
15600735003  
1
5%@ 15625ZE1003  
PACKING, OIL FILTER  
GOVERNOR ASSY............................................1................INCLUDES ITEMS W/#  
2
6$  
16510ZE3000  
16511ZE8000  
16512ZE3000  
16513ZE2000  
16531ZOA000  
90602ZE1000  
90701HC4000  
91201ZE3004  
9410106800  
7#$  
8#$  
9#$  
10$  
11$  
12  
13$  
14$  
15  
WEIGHT, GOVERNOR  
3
1
3
1
1
2
HOLDER, GOVERNOR WEIGHT  
PIN, GOVERNOR WEIGHT  
SLIDER, GOVERNOR  
CLIP, GOVERNOR HOLDER  
PIN, DOWEL (8X12)  
OIL SEAL (35X52X8).........................................1................REPLACES 92102ZE3004  
WASHER, PLAIN (6MM)  
BOLT, FLANGE (8X40)  
BEARING, RADIAL BALL (6202)  
BEARING, RADIAL BALL (6207)  
1
7
1
1
957010804000  
961006202000  
961006207000  
16$  
17$  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CRanksHafT assy.  
page 62 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CRanksHafT assy.  
NO.  
8
13#  
14  
pART NO.  
pART NAmE  
WEIGHT, BALANCER  
BEARING, RADIAL BALL (6207)  
CRANKSHAFT COMP........................................1................INCLUDES ITEM W/#  
QTY.  
REmARks  
13351ZE3010  
961001ZF6013  
13310ZF6D42  
1
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CylinDeR baRRel assy.  
pAgE 64 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CylinDeR baRRel assy.  
NO.  
1
1
2
3
pART NO.  
pART NAmE  
BARREL ASSY, ELECTRIC START...................1................INCLUDES ITEMS W/$  
BARREL ASSY, RECOIL START. ......................1................INCLUDES ITEMS W/#  
QTY.  
REmARks  
12000Z5T405  
12000Z5T407  
35480ZF6003  
16541ZE3010  
90131896650  
90446KE1000  
SWITCH ASSY., OIL LEVEL  
SHAFT, GOVERNOR ARM  
1
1
7
8
BOLT, DRAIN PLUG ..........................................2................REPLACES P/N 90131883000  
WASHER (8.2X17X0.8)  
OIL SEAL (35X52X8)  
1
1
10$# 91201Z1C003  
11$# 91201ZE9003  
OIL SEAL (8X14X5)...........................................1................REPLACES P/N 91203952771  
O-RING (13.5X1.5) ...........................................1................REPLACES P/N 91353671004  
12  
13  
14  
15  
16  
91353671003  
9405010000  
031112230  
9425110000  
957010601200  
NUT, FLANGE (10MM)  
WASHER, DRAIN PLUG (12MM)......................2................REPLACES P/N 9410912000  
1
PIN, LOCK (10MM)  
BOLT FLANGE (6X12)  
BEARING, RADIAL BALL (6202)  
1
2
1
17$# 961006202000  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CylinDeR HeaD assy.  
page 66 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — CylinDeR HeaD assy.  
NO.  
1
2$  
3$  
4$  
5
pART NO.  
pART NAmE  
CYLINDER HEAD..............................................1................INCLUDES ITEMS W/$  
QTY.  
REmARks  
12210Z5T406  
12204ZE2306  
12205ZE2305  
12216ZE2300  
12251Z5T003  
12310Z5T000  
12391ZE2020  
90014ZE2000  
90042ZK6D70  
92900080320E  
90441ZE2010  
9430112200  
957011008000  
9807955846  
9807955855  
GUIDE, VALVE (OS) (OPTIONAL)  
GUIDE, EX. VALVE (OS) (OPTIONAL)  
CLIP, VALVE GUIDE  
GASKET, CYLINDER HEAD  
COVER, CYLINDER HEAD  
GASKET, CYLINDER HEAD COVER  
BOLT, HEAD COVER  
BOLT, STUD (8X106)  
BOLT 2, STUD (8X32)  
WASHER, HEAD COVER  
PIN A, DOWEL (12X20)  
BOLT, FLANGE (10X80)  
1
1
1
1
1
1
1
2
2
1
2
4
6
8
10  
11  
12  
13  
14  
15  
16  
16  
SPARK PLUG (BPR5ES) (NGK) (OPTIONAL) 1  
SPARK PLUG (W16EPR-U) (DENSO)  
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — fan CoVeR assy.  
page 68 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — fan CoVeR assy.  
NO.  
2
4
8
10  
11  
pART NO.  
19610Z5T800ZC COVER, FAN *NH1* (BLACK)  
pART NAmE  
QTY.  
REmARks  
1
1
1
6
2
19631Z5T000  
81329567020  
90013883000  
90654SA4003  
SHROUD  
GROMMET, DRAIN HOLE  
BOLT, FLANGE (6X12) (CT200)  
CLIP, WIRE HARNESS (6MM) (WHITE)  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — flywHeel assy.  
pAgE 70 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — flywHeel assy.  
NO.  
1
4
8
8
pART NO.  
pART NAmE  
FAN, COOLING  
PULLEY, STARTER  
FLYWHEEL COMP., (RECOIL STRART)  
FLYWHEEL COMP., ELECTRIC START  
NUT, SPECIAL 16MM  
QTY.  
REmARks  
19511ZE3000  
28451ZE3W01  
31100Z5T810  
31100Z5T820  
90201ZE3790  
90741ZE2000  
1
1
1
10  
11  
1
1
KEY, SPECIAL WOODRUFF (25X18)  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — iGniTion Coil assy.  
pAgE 72 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — iGniTion Coil assy.  
NO.  
2
3
4
5
10  
11  
13  
14  
15  
16  
25  
pART NO.  
pART NAmE  
QTY.  
REmARks  
30700ZE1013  
31510ZE3003  
31511ZE3000  
31512ZE2000  
90012888000  
90013883000  
90015883000  
90684ZA0601  
30500Z5R003  
31510ZE1811  
32110Z5K000  
CAP ASSY., NOISE SUPPRESSOR  
COIL ASSY., LAMP (12V/25W)  
CLAMP, WIRE  
1
1
1
1
4
1
2
1
1
1
1
GROMMET, WIRE  
BOLT, FLANGE (6X40)  
BOLT, FLANGE (6X12) (CT200)  
BOLT, FLANGE (6X28)  
CLIP, HARNESS, RECOIL START  
COIL ASSY., IGNITION  
COIL ASSY., LAMP (12V/25W)  
HARNESS ASSY., ENGINE WIRE  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — PisTon assy.  
pAgE 74 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — PisTon assy.  
NO.  
1
1
1
1
2
2
2
2
3
4
5$  
6
pART NO.  
pART NAmE  
QTY.  
REmARks  
13010Z5R004  
13011Z5R004  
13012Z5R004  
13013Z5R004  
13101Z5T800  
13102Z5T800  
13103Z5T800  
13104Z5T800  
13111Z5T000  
13200ZE3020  
90001ZE8000  
90601ZE3000  
RING SET, PISTON (STD)  
RING SET, PISTON (OS 0.25) (OPTIONAL)  
RING SET, PISTON (OS O.50) (OPTIONAL)  
RING SET, PISTON (0.75) (OPTIONAL)  
PISTON (STD)  
1
1
1
1
1
1
1
1
1
PISTON (0.25)  
PISTON (0.50)  
PISTON (0.75)  
PIN, PISTON  
ROD ASSY., CONNECTING (STD) ...................1................INCLUDES ITEMS W/$  
BOLT, CONNECTING ROD  
CLIP, PISTON PIN (20MM)  
2
2
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — ReCoil sTaRTeR assy.  
pAgE 76 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — ReCoil sTaRTeR assy.  
NO.  
1
pART NO.  
28400Z5T305ZB STARTER ASSY., RECOIL *NH1* (BLACK)......1................INCLUDES ITEMS W/$  
pART NAmE  
QTY.  
REmARks  
.............................................................................................REPLACES P/N 28400Z5T003ZB  
2$  
3$  
4$  
5$  
6$  
7$  
8$  
10$  
11$  
12  
13$  
14$  
28410ZE3W01ZB CASE, RECOIL STARTER *NH1* (BLACK)  
1
1
2
1
1
2
1
28421ZE3W01  
28422ZE2W01  
28441ZE2W01  
28442ZE2W01  
28443ZE2W01  
28444ZE2W01  
28462ZV7003  
90004ZE2W01  
90008ZE2003  
28461Z5T003  
28463Z5T003  
PULLEY, RECOIL STARTER  
RATCHET, STARTER  
SPRING, FRICTION  
SPRING, STARTER RETURN  
SPRING, RATCHET  
RETAINER, SPRING  
ROPE, RECOIL STARTER ................................1................REPLACES P/N 28462ZE3W01  
SCREW, CENTER  
BOLT, FLANGE (6X10)  
GRIP, STARTER  
GRIP, REINFORCEMENT  
1
3
1
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2 — sTaRTeR moToR assy.  
pAgE 78 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2 — sTaRTeR moToR assy.  
NO.  
1$  
2$  
3$  
4
5$  
6$  
7$  
8$  
9$  
10$  
pART NO.  
pART NAmE  
CONTACTOR ASSY.  
ARMATURE COMPLETE  
CLUTCH, OVERRUNNING................................1................INCLUDES ITEMS W/%  
MOTOR UNIT, STARTER...................................1................INCLUDES ITEMS W/$  
BRACKET, CENTER  
BRACKET, FRONT  
GEAR, DRIVE PINION  
BRUSH  
YOKE COMPLETE  
SPRING, BRUSH RETURN  
GEAR, REDUCTION  
HOLDER, BRUSH  
QTY.  
REmARks  
31204ZA0003  
31206ZE3003  
31207ZE3003  
31210ZE3023  
31211ZE2003  
31212ZE3003  
31213ZE2003  
31215ZE2003  
31218ZE3003  
31219ZE2003  
1
1
1
1
1
2
1
4
1
1
11$% 31222ZE3791  
12$  
14$  
15$  
31231ZE2003  
31232ZE3003  
31233ZE2003  
WIRE, WATER COVER......................................1................INCLUDES ITEMS W/#  
INSULATOR  
SCREW, WASHER (4X6)  
GASKET  
BOLT, WASHER (5X14)  
SCREW, WASHER (5X32)  
NUT, WASHER (6 MM)  
BOLT, FLANGE (8X35)  
1
1
1
2
4
2
2
16$# 90110ZE2003  
18$  
19$  
20$  
21$  
22  
91601ZE2003  
90007ZE2003  
938920503218  
9407006080  
957010803508  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — solenoiD assy.  
page 80 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — solenoiD assy.  
NO.  
1
2
3
4
pART NO.  
pART NAmE  
QTY.  
REmARks  
16268893000  
17850ZD1E30  
36160ZB4013  
90013883000  
93500050080A  
SPRING, CHOKE RETURN  
LEVER, THROTTLE  
SOLENOID ASSY.  
1
1
1
1
2
BOLT, FLANGE (6X12)  
SCREW, PAN (5X8)  
5
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — enGine DeCals assy.  
page 82 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HonDa GX340R2eDe2/eDn2 — enGine DeCals assy.  
NO.  
1
2
3
4
pART NO.  
pART NAmE  
DECAL, AIR CLEANER  
DECAL, CHOKE  
MARK, OIL CAUTION  
EMBLEM (GX340)  
QTY.  
REmARks  
87533ZC0630  
87528898620  
87594ZB4A00  
87521Z8T000  
1
1
1
1
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TeRms anD ConDiTions of sale — PaRTs  
5. Parts must be in new and resalable  
condition, in the original Multiquip  
package (if any), and with Multiquip part  
numbers clearly marked.  
Multiquip reserves the right to quote and  
sell direct to Government agencies, and to  
Original Equipment Manufacturer accounts  
who use our products as integral parts of their  
own products.  
pAYmENT TERms  
Terms of payment for parts are net 30 days.  
FREighT pOliCY  
6. The following items are not returnable:  
All parts orders will be shipped collect or  
prepaid with the charges added to the invoice.  
All shipments are F.O.B. point of origin.  
Multiquip’s responsibility ceases when a  
signed manifest has been obtained from the  
carrier, and any claim for shortage or damage  
must be settled between the consignee and  
the carrier.  
a. Obsolete parts. (If an item is in the  
price book and shows as being  
replaced by another item, it is  
obsolete.)  
spECiAl EXpEdiTiNg sERviCE  
A $35.00 surcharge will be added to the  
invoice for special handling including bus  
shipments, insured parcel post or in cases  
where Multiquip must personally deliver the  
parts to the carrier.  
b. Any parts with a limited shelf life  
(such as gaskets, seals, “O” rings,  
and other rubber parts) that were  
purchased more than six months  
prior to the return date.  
limiTATiONs OF sEllER’s liABiliTY  
miNimum ORdER  
Multiquip shall not be liable hereunder for  
damages in excess of the purchase price of  
the item with respect to which damages are  
claimed, and in no event shall Multiquip be  
liable for loss of profit or good will or for any  
other special, consequential or incidental  
damages.  
The minimum charge for orders from Multiquip  
is $15.00 net. Customers will be asked for  
instructions regarding handling of orders not  
meeting this requirement.  
c. Any line item with an extended  
dealer net price of less than  
$5.00.  
d. Special order items.  
RETuRNEd gOOds pOliCY  
Return shipments will be accepted and  
credit will be allowed, subject to the following  
provisions:  
e. Electrical components.  
f. Paint, chemicals, and lubricants.  
g. Decals and paper products.  
h. Items purchased in kits.  
limiTATiON OF WARRANTiEs  
No warranties, express or implied, are  
made in connection with the sale of parts or  
trade accessories nor as to any engine not  
manufactured by Multiquip. Such warranties  
made in connection with the sale of new,  
complete units are made exclusively by a  
statement of warranty packaged with such  
units, and Multiquip neither assumes nor  
authorizes any person to assume for it  
any other obligation or liability whatever in  
connection with the sale of its products. Apart  
from such written statement of warranty,  
there are no warranties, express, implied or  
statutory, which extend beyond the description  
of the products on the face hereof.  
1. A Returned Material Authorization  
must be approved by Multiquip prior to  
shipment.  
7. The sender will be notified of any material  
received that is not acceptable.  
8. Such material will be held for five  
working days from notification, pending  
instructions. If a reply is not received  
within five days, the material will be  
returned to the sender at his expense.  
2. To obtain a Return Material Authorization,  
a list must be provided to Multiquip  
Parts Sales that defines item numbers,  
quantities, and descriptions of the items  
to be returned.  
9. Credit on returned parts will be issued  
at dealer net price at time of the original  
purchase, less a 15% restocking  
charge.  
a. The parts numbers and descriptions  
must match the current parts price  
list.  
b. The list must be typed or computer  
generated.  
10. In cases where an item is accepted, for  
which the original purchase document  
can not be determined, the price will be  
based on the list price that was effective  
twelve months prior to the RMA date.  
c. The list must state the reason(s)  
for the return.  
Effective: February 22, 2006  
d. The list must reference the sales  
order(s) or invoice(s) under  
which the items were originally  
purchased.  
11. Credit issued will be applied to future  
purchases only.  
pRiCiNg ANd REBATEs  
e. The list must include the name  
and phone number of the person  
requesting the RMA.  
Prices are subject to change without prior  
notice. Price changes are effective on a  
specific date and all orders received on or  
after that date will be billed at the revised price.  
Rebates for price declines and added charges  
for price increases will not be made for stock  
on hand at the time of any price change.  
3. AcopyoftheReturnMaterialAuthorization  
must accompany the return shipment.  
4. Freight is at the sender’s expense. All  
parts must be returned freight prepaid to  
Multiquip’s designated receiving point.  
pAgE 84 — ga6HB/ga6HeB 60 hz gENERATOR• OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
noTes  
ga6HB/6HeB 60 hz gENERATOR • OpERATiON ANd pARTs mANuAl — REv. #0 (03/13/14) — pAgE 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OperatiOn and parts Manual  
HERE’S HOW TO GET HELP  
PLEASE HAVE THE MODEL AND SERIAL  
NUMBER ON-HAND WHEN CALLING  
UNITED STATES  
Multiquip Corporate Office  
MQ Parts Department  
18910 Wilmington Ave.  
Carson, CA 90746  
Contact: [email protected]  
Tel. (800) 421-1244  
Fax (310) 537-3927  
800-427-1244  
310-537-3700  
Fax: 800-672-7877  
Fax: 310-637-3284  
Service Department  
Warranty Department  
800-421-1244  
310-537-3700  
Fax: 310-537-4259  
Fax: 310-943-2238  
800-421-1244  
310-537-3700  
Fax: 310-943-2249  
Technical Assistance  
800-478-1244  
UNITED KINGDOM  
CANADA  
Multiquip  
Multiquip (UK) Limited Head Office  
4110 Industriel Boul.  
Laval, Quebec, Canada H7L 6V3  
Contact: [email protected]  
Tel: (450) 625-2244  
Tel: (877) 963-4411  
Fax: (450) 625-8664  
Unit 2, Northpoint Industrial Estate, Tel: 0161 339 2223  
Fax: 0161 339 3226  
Globe Lane,  
Dukinfield, Cheshire SK16 4UJ  
Contact: [email protected]  
© COPYRIGHT 2014, MULTIQUIP INC.  
Multiquip Inc, the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property  
of their respective owners and used with permission.  
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.  
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in  
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifications, design or the information published  
in this publication at any time without notice and without incurring any obligations.  
Your Local Dealer is:  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer W 504 Plus User Manual
National Instruments Personal Computer MXI User Manual
NetComm Network Card SCINTRA600 User Manual
NextBase Portable DVD Player SDV37 SQ User Manual
Omega Engineering Automobile Parts FPR 200 User Manual
Panasonic Blood Pressure Monitor EW3037 User Manual
Panasonic Drill EY6405 User Manual
Panasonic Fax Machine KX FPG371 User Manual
Panasonic Intercom System KX TD161 User Manual
Patton electronic Marine Battery 2039 User Manual