Panasonic Intercom System KX TD161 User Manual

Installation Instructions

Doorphone Card

Model KX-TD161

Please read this manual before installing the card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Location of the Card

The location of the optional card is shown below.

Precaution: To protect the printed circuit boards (P-

boards) from static electricity, do not touch

parts on the P-boards in the main unit and

on the optional cards.

KX-TD816

Doorphone

Card

Connector

Doorphone

Card

Front cover is open.

Download from Www.Somanuals.com. All Manuals Search And Download.

KX-TD1232

DOORPHONE

Doorphone

Card Connector

Doorphone

Card

Front cover is open.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation for the Card

1. Set the power switch on the main unit to the OFF

position and disconnect the power cord from the AC

outlet.

D1232

DIGITAL SUPER HYBRID SYSTEM

D816

DIGITAL SUPER HYBRID SYSTEM

Disconnect

from

AC outlet

Disconnect

from

AC outlet

Panasonic

Power Switch

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Loosen the two screws on the right side of the main unit

and open the front cover in the direction of arrow

D1232

DIGITAL SUPER HYBRID SYSTEM

D816

DIGITAL SUPER HYBRID SYSTEM

screw

Panasonic

screw

Note

• The two screws are attached to the front cover

with springs so that they will not be lost.

3. To install the Doorphone Card, see page 7.

4. Close the front cover and screw.

5. Connect the power cord to the AC outlet and then

set the Power Switch on the main unit to ON

position.

Download from Www.Somanuals.com. All Manuals Search And Download.

Doorphone Card

Before installing the Doorphone Card to the main unit,

install the Doorphone (KX-T30865). For details about

the doorphone, refer to the Installation Manual.

1. Connect two 4-conductor modular connectors to the

Doorphone Card Cabinet, and pass the cords through

the grooves in the cabinet.

2. Attach the Doorphone Card Cabinet to the main unit

and press down.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Connect the cord to the Doorphone Card Connector.

KX-TD1232

KX-TD816

To Terminal Box

Installation

Download from Www.Somanuals.com. All Manuals Search And Download.

Wiring of the Doorphone

1. Connect the Doorphone Card to the terminal box

using two 4-conductor modular connectors.

2. Connect the wires of doorphone 1 to the red and

green screws of the terminal box.

3. Connect the wires of doorphone 2 to the yellow and

black screws of the terminal box.

4. Connect the wires of doorphone 3 to the red and

green screws of the terminal box.

5. Connect the wires of doorphone 4 to the yellow and

black screws of the terminal box.

Download from Www.Somanuals.com. All Manuals Search And Download.

KX-TD816

View of Doorphone Connector Jack

Doorphone 4

Doorphone 3

Doorphone 2

4-conductor wiring

is required.

Doorphone 1

Terminal Box

Doorphone 4

Doorphone 3

(KX-T30865)

Yellow

(KX-T30865)

Black

Green

Red

Panasonic

4-conductor wiring

is required.

Terminal Box

Doorphone 2

Doorphone 1

(KX-T30865)

Yellow

(KX-T30865)

Black

Green

Red

Panasonic

Download from Www.Somanuals.com. All Manuals Search And Download.

KX-TD1232

View of Doorphone

Connector Jack

Doorphone 4

Doorphone 3

Doorphone 2

Doorphone 1

4-conductor wiring

is required.

Terminal Box

Doorphone 4

(KX-T30865)

Black

Doorphone 3

(KX-T30865)

Yellow

Green

Red

Panasonic

4-conductor wiring

is required.

Terminal Box

Doorphone 2

(KX-T30865)

Black

Doorphone 1

(KX-T30865)

Yellow

Green

Red

Panasonic

Note

• NB Colors shown on the above diagram indicate

the internal cable connections of the Terminal

Box.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Door Openers

1. Loosen the screw to remove the cover.

2. Loosen the screws on the terminal strip.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Insert the wires coming from the door openers into

holes and tighten the screws.

Pass all the wires through the Holder.

Holder

To door opener 4

To door opener 3

To door opener 2

To door opener 1

Note

• Set the door opener paired with the doorphone.

• For wiring, UL 1015, AWG 22 twisted wire or the

equivalent is recommended.

• The wire should be between 1.2 mm and 2.4 mm

(3/64 inch and 3/32 inch) in diameter including

the coating.

D=1.2 mm-2.4 mm (3/64 inch-3/32 inch)

Download from Www.Somanuals.com. All Manuals Search And Download.

Panasonic Consumer Electronics

Company, Division of Matsushita

Electric Corporation of America

One Panasonic Way, Secaucus,

New Jersey 07094

www.panasonic.com

Panasonic Sales Company (“PSC”),

Division of Matsushita Electric of

Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5,

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

This manual is copyrighted by Kyushu Matsushita Electric

Co., Ltd. (KME). Under the applicable copyright laws, this

manual may not be reproduced in any form, in whole or part,

without the prior written consent of KME and its licensee.

Printed in the United Kingdom PSQX2631ZA KA0901HK0

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Refrigerator 09 170 080 User Manual
Miele Washer 09 848 440 User Manual
Miller Electric Air Compressor AC Generator Air Compressor User Manual
Miller Electric Welding System HF 251D 1 User Manual
Nady Systems Microphone SCM 960 User Manual
Niles Audio Stereo Amplifier SSVC 2 User Manual
Numark Industries CD Player CDN22 User Manual
NuTone Patio Heater 9315T User Manual
Nvidia Computer Hardware GeForce MX Series User Manual
Patriot Products Blower T4 CBV User Manual