Miele Washer PW 6065 User Manual

Operating manual  
Washer  
PW 6065 Plus  
To prevent accidents  
and machine damage  
read these instructions  
before  
UV  
installation or use.  
M.-Nr. 06 523 700  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Guide to the washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Using the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
To change a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
To cancel a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
To change a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Adding/removing laundry during a wash program . . . . . . . . . . . . . . . . . . . . . . . . 16  
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Program sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Spin speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Delay Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Cleaning the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Cleaning the inlet hose filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
A wash program cannot be started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
General problems with the washer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Opening the door during a power failure or when the drain is blocked . . . . . . . . 39  
Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Installation on a base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Removing the shipping struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Installing the shipping struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Leveling the washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Water connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Settings J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Settings - Supervisor level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Do not connect the appliance to  
Read the operating instructions  
the mains electrical supply with an  
extension cord. Extension cords do not  
guarantee the required safety of the  
appliance (e.g. danger of overheating).  
before using this machine for the  
first time. They contain important  
information about the safety, use and  
maintenance of the machine. Doing  
so will prevent injury and damage to  
the dryer.  
The machine is built in accordance  
with current safety requirements.  
Incorrectly repaired machines may  
pose a considerable risk to the user  
which is not covered by the  
manufacturer. Repairs should only be  
performed by a Miele approved  
technician.  
Save these instructions and pass  
them on to any future user.  
WARNING - To reduce the risk  
of fire, electric shock or injury:  
Ensure power is not supplied to the  
appliance while maintenance or  
repair work is being performed. The  
machine is only completely isolated  
from the electrical supply when it is  
turned off at the main switch and the  
plug is pulled or by tripping the circuit  
breaker.  
Technical Safety  
Check the packaging, the washer  
and accessories for any signs of  
damage. Do not use a damaged  
appliance.  
Before connecting the machine,  
ensure that the connection data on  
the data plate (circuit protection,  
voltage and frequency) match the  
mains electrical supply. If in doubt  
contact an electrician.  
Connect the washer, to the water  
mains. Do not use old hoses.  
Inspect the intake hoses regularly for  
damage. They should be replaced as  
needed to prevent water damage.  
Faulty components must only be  
replaced with genuine Miele spare  
parts to maintain safety standards.  
The appliance must be grounded.  
It is imperative that this basic  
safety requirement be met.  
If the power cord is damaged it  
must only be replaced by a Miele  
Service technician with a genuine Miele  
power cord.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Use  
Do not wash articles that have  
been previously cleaned, washed  
soaked or spotted with gasoline,  
organic substances dry-cleaning  
solvents, or any other flammable  
substances. These articles give off  
vapors that could ignite or explode. Do  
not add these items to the washload.  
Only use the washing machine to  
wash items which are specified by  
the manufacturer to be machine  
washable on the fabric care label. Any  
other applications may cause  
undesirable results. The manufacturer  
cannot be held responsible for damage  
caused by improper use of the  
appliance.  
Before using the machine for the  
first time, check that the shipping  
struts at the rear of the machine have  
been removed (see "Installation"). If the  
shipping struts are still in place during  
spinning, damage may result to both  
the machine and adjacent furniture or  
appliances.  
This appliance is not designed for  
maritime use or for use in mobile  
installations such as recreational  
vehicles or aircraft. However, under  
certain conditions it may be possible for  
installation in these applications. Please  
contact the Miele Technical Service  
Department with specific requirements.  
Turn off the water supply if the  
machine is to be left for any length  
of time (e.g. vacation).  
Do not install this machine in rooms  
where temperatures below freezing  
may occur. Frozen hoses may burst  
under pressure. The reliability of the  
electronic control unit may be impaired  
at temperatures below freezing.  
Overflow hazard!  
Check that the drain can  
accommodate the water flow before  
operating the washer.  
Make certain the drain hose is secured  
in the drain, otherwise the force of the  
expelled water could cause the drain  
hose to come out of the drain.  
Be sure that foreign objects (e.g.  
nails, pins, coins, paper clips) do  
not find their way into the machine.  
These items may damage the  
machine, which may also cause  
damage to the laundry.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
If the correct amount of detergent  
The stainless steel casing must not  
come in contact with liquid  
cleaning or disinfection agents  
containing chlorine. They may cause  
corrosion. Do not store open  
containers of this agent next to the  
machine.  
is dispensed, the machine should  
not need to be descaled. If the washer  
needs to be descaled, use a descaling  
agent with corrosion protection. These  
special descaling agents can be  
purchased from the Miele Service  
department. Use as directed.  
Children  
Never use solvent based cleaning  
agents in this machine, this may  
result in damage and create toxic  
fumes. They will present a fire and  
explosion hazard.  
Close supervision is necessary  
when the appliance is used near  
children. Do not allow children to play  
on or in the appliance.  
Items which have been pre-treated  
in solvent based cleaning agents  
must be thoroughly rinsed in clean  
water before being washed in the  
machine.  
Using accessories  
Accessories must only be installed  
once approved by Miele. Installing  
unapproved parts may void the  
warranty and product liability.  
Only use dyes specified by the  
manufacturer as being suitable for  
use in a washing machine. Use as  
directed by the manufacturer.  
Dye removers may contain sulphur  
compounds which cause damage  
such as corrosion. Do not use dye  
removers in this machine.  
The drum door glass will be hot  
when washing at very high  
temperatures. Do not touch the glass.  
Danger of burns!  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the washer  
Control panel  
a Display*  
d Optical interface PC  
See the following pages for more  
Allows a service technician to check  
information  
and update the wash programs  
b Direct select buttons  
e Jog shuttle  
To select a wash program directly.  
You can also save a "Favorite" wash  
program on these buttons.  
Turn to select menus  
Press to confirm the selection  
f a Door button to open the drum  
c "Start" button  
door.  
* Contents in the display will vary with program offering.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the washer  
Display function  
Display contents will vary with program offering.  
Main menu  
1
Cottons Uni.  
Wrinkle-free  
Delicates  
60°C  
40°C  
40°C  
30°C  
Program selection  
2
3
4
Settings  
F
Woollens H  
12:00  
The display shows the main menu (with factory default  
settings). "Program selection" is highlighted.  
If the display is dark (in Stand-by mode) turn the jog shuttle.  
Jog shuttle  
Turn the jog shuttle to select a program or setting.  
Press the jog shuttle to confirm the selection.  
Direct select buttons  
The first four programs shown in the display on the left are the  
"Favorites". They can be selected with the direct select  
buttons.  
The Favorites can be individually set to your desire. See  
"Favorites" for more information.  
The direct select buttons have different functions in the other  
menus. In these menus an arrow H is displayed above the  
respective button with the function description of the button.  
Program selection possibility  
Possibility 1 Select and confirm the menu "Program  
selection" in the display with the jog shuttle.  
Possibility 2 Press one of the direct select buttons  
D E F G and access directly the basic menu of  
the program.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the washer  
Menu Program selection  
Program  
selection  
backA  
Cottons Hygiene  
Cottons Uni.  
Wrinkle-free  
H
All pre-set programs can be selected with the jog shuttle.  
Depending on the direction the jog shuttle is turned the  
highlighter moves up or down.  
The arrows e- at the right side of the display show that more  
selections are available.  
^ Press the jog shuttle to open the basic menu of the  
selected program.  
Basic menu of a wash program  
Cottons  
60°C  
1400 rpm  
Duration 0:45 h  
Extras  
Delay Start Y  
Back A  
H
H
H
The program components (program, temperature and spin  
speed) can be selected by turning the jog shuttle. The  
selected component is highlighted. Press the jog shuttle to  
select the component. The respective submenu is displayed.  
The submenu "Extras" and "Delay Start" can be selected by  
the direct select buttons.  
^ To go back to the main menu, press G "back".  
All components can also be selected and confirmed with the  
jog shuttle only.  
Settings J  
The "Settings" menu allows you to adjust the washer to  
individual needs. See "Settings" for more information.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Shipping struts  
The appliance must be correctly  
installed and connected before the  
first use. Please see the "Installation  
instructions."  
The display reminds the user to remove  
the shipping struts.  
^ If the shipping struts were already  
removed, confirm with the G  
button. Otherwise remove them at  
this time then confirm.  
For safety reasons, it is not possible to  
run a spin cycle before the first use. A  
program must be run without laundry  
and detergent to flush out any residual  
water from the factory testing process.  
Set the time of day  
^ Set the hour by turning the jog shuttle  
and press to confirm.  
^ Open the water mains.  
^ Repeat to set the minutes and  
confirm. Press again to save the time  
of day.  
Welcome screen  
The Welcome screen shows when the  
washer is turned on for the first time.  
Basic menu "Cottons Uni." shows  
^ Press the flashing button "Start".  
The drum door must be closed.  
M
PROFESSIONAL  
Welcome!  
Once the program ends the washer can  
be used for laundry.  
The welcome screen will not show  
anymore, when the total wash time of  
the washer exceeds one hour.  
The display then shows the language  
selection.  
Language J  
^ Select the desired language and  
confirm with "OK".  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the washer  
1. Sort the laundry  
General tips  
– Dark fabrics often bleed the first few  
times they are washed. They should  
be washed separately several times  
before being included in a mixed  
load.  
– Remove any lead weights or strips  
from curtains before washing.  
– Loose underwires should be  
removed or sewn in place before  
washing.  
– Woolens and knitted garments  
should be turned inside out.  
– Close zippers and hooks and eyes  
before washing.  
^ Empty all pockets.  
,Foreign objects left in pockets  
(e.g. nails, coins, paper clips, etc.)  
can cause damage to clothes and  
the machine.  
– Comforter covers and pillowcases  
should be fastened in order to  
prevent small items from getting  
trapped inside of them.  
Do not machine wash items if it is not  
^ Pre-treat stains.  
recommended on the fabric care label.  
Tough stains (blood, egg, coffee, tea  
etc.) or badly soiled areas (collars and  
cuffs) should be penetrated with a stain  
remover or a paste made from powder  
detergent and warm water. Dab stains  
with a damp light colored cloth. Do not  
rub!  
,Do not use chemical solvents in  
the machine.  
^ Sort the laundry.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the washer  
2. Load the washer  
3. Select a program  
^ Open the drum door using the a  
Two program selection possibilities:  
button.  
– Select a "Favorite" by pressing the  
respective direct select button.  
The drum light comes on.  
^ Load the laundry loosely into the  
drum.  
– Select from the "Program selection"  
menu by turning the jog shuttle.  
For best results, wash mixed loads of  
small and large items. This will improve  
washing effectiveness and help  
distribute the load evenly.  
^ If desired select "Extras" and/or a  
delay start time with the respective  
submenus.  
Coin mechanism  
For the lowest energy and water  
consumption load the washer to its  
max. capacity. See "Program guide".  
If a coin mechanism operates the  
machine, please regard the displayed  
request to pay.  
Note: Overloading the washer will  
affect wash results and cause wrinkling.  
If the door is opened after a program  
has started or if the program is  
canceled the credit is lost.  
^ Close the drum door.  
Close the drum door. To prevent  
damage to the door seal and  
clothing, make sure that there are no  
clothes caught between the drum  
door and the seal.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the washer  
4. Adding detergent  
Use detergent according to the laundry  
soiling and water hardness.  
Too little detergent may cause:  
– ineffective cleaning of laundry;  
fabrics may become gray and stiff  
over time.  
– grease stains on the laundry.  
– hard water deposits on the heating  
element.  
Too much detergent may cause:  
^ Pull out the detergent dispenser  
drawer and add detergent.  
– oversudsing with minimal drum  
movement; poor wash, rinse and  
spin results.  
j = Detergent for the main wash  
i = Only add detergent (1/4 of the  
total recommended amount of  
detergent) to this compartment  
for the pre-wash.  
– higher environmental burden.  
See "Detergent" for more information.  
§
= Fabric softener or liquid starch.  
^ Close the detergent dispenser  
drawer.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the washer  
5. Starting a program  
6. At the end of a program  
"Start" flashes when a program can be  
started.  
The anti-crease program starts when  
the laundry is not immediately removed  
from the washer after the program end.  
"Anti-crease" and "End" will flash  
alternately in the display.  
^ Press the "Start" button.  
The "Start" button lights.  
The display shows the approximate  
program run time. It will count down in  
minutes. The first 10 minutes the  
washer calculates the water  
^ Use the a "Door" button to open the  
drum door.  
^ Remove the laundry.  
absorbency of the laundry. The overall  
program time may be shortened or  
lengthened.  
Check the drum for any missed  
pieces of laundry. Items  
inadvertently left in the washer may  
get damaged (e.g. shrink or  
Additionally the sequence cycle is  
displayed. The washer shows the  
current program step.  
discolor) during the next wash cycle.  
The drum light turns off after the  
program starts.  
Press one of the following direct select  
buttons during the running program:  
– Button D "Extras"  
the displayed Extras can be selected  
or deselected after the program start.  
– Button E "Delay Start"  
the time of day and the approximate  
program end is displayed.  
– Button G "Cancellation"  
to cancel the currently running  
program. The wash water will be  
drained away.  
^ Check the folds of the door seal for  
any small articles which may have  
been trapped.  
^ Close the drum door. Otherwise  
foreign objects may find their way  
into the drum. These could be  
inadvertently washed and cause  
damage to laundry.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change a program  
To cancel a program  
Note:  
A program can be canceled any time  
after a program start.  
Once the program has started the  
washer cannot make adjustments of the  
load size. After adding or removing  
laundry, the washer will default to the  
water and electrical consumption of a  
full load.  
^ Press the button G "Cancellation".  
The wash water will be drained away.  
^ Open the drum door before starting a  
new program.  
The time remaining will automatically be  
adjusted.  
To change a program  
The drum door cannot be opened if:  
After the program start the spin speed  
can be selected until the final spin  
starts. The Extras "Starch Stop" and  
"Rinse Stop" can be selected or  
deselected.  
– the water temperature is higher than  
131°F/55°C.  
– the water level is too high.  
– the program has reached the "Final  
Spin".  
The temperature and the Extra  
"Intensive" can be selected or  
deselected up to 5 minutes after the  
program start.  
When operated with a coin  
mechanism the machine will be  
locked after 3 minutes. Canceling or  
changing a program and opening  
the door is no longer possible.  
Adding/removing laundry  
during a wash program  
You can interrupt the programs (see  
"Program guide") to add or remove a  
piece of laundry.  
^ Use the a button to open the door.  
^ Add or remove the piece of laundry.  
^ Close the drum door.  
The program will continue  
automatically.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Programs may vary depending on the offerings of your machine.  
Cottons Hygiene 203°F to 158°F (95°C to 70°C)  
EF  
Items  
Items made from cotton and linen, i.e. bed linen, baby clothing,  
underwear  
Detergent  
Load size  
Universal detergent  
14.3 lbs (6.5 kg)  
Cottons Uni. 140°F to cold (60°C to cold)  
DBA  
Items  
Tip  
Items made from cotton or mixed fabric, i.e. T-Shirts, pants  
Wash dark colored fabrics with detergent for colors or a liquid  
detergent.  
Detergent  
Load size  
Universal or color detergent  
14.3 lbs (6.5 kg)  
Minimum iron 140°F to 86°F (60°C to 30°C)  
JHG  
Items  
Items made from synthetic fibers, mixed fabric or wrinkle free  
cottons, i.e. shirts  
Detergent  
Load size  
Universal or color detergent  
7.7 lbs (3.5 kg)  
Delicates 140°F to 86°F (60°C to 30°C)  
NM  
BA  
Items  
Delicates made from synthetic, mixed fabric or viscose silk  
Detergent  
Load size  
Detergent for delicates  
5.5 lbs (2.5 kg)  
Quick wash 104°F to cold (40°C to cold)  
Items  
Small load of lightly soiled items, which can be washed in  
"Cottons Uni."  
Detergent  
Load size  
Universal or color detergent  
7.7 lbs (3.5 kg)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Woollens 104°F to cold (40°C to cold)  
Items  
Items made from machine washable wool and wool blend  
fabrics.  
Detergent  
Load size  
Detergent for wool  
5.5 lbs (2.5 kg)  
Silk / 86°F to cold (30°C to cold)  
Items  
Hand washable items, that contain no wool.  
Tip  
Wash hosiery and lingerie in a lingerie bag.  
Detergent for delicates  
Detergent  
Load size  
5.5 lbs (2.5 kg)  
Shirts 140°F to cold (60°C to cold)  
Items  
Tip  
Shirts and dress shirts.  
Pre-treat collars and cuffs depending on soiling  
Wash silk shirts in the "Silk" program.  
Detergent  
Load size  
Universal or color detergent  
5.5 lbs (2.5 kg)  
Denim 104°F to cold (40°C to cold)  
Tip  
Before washing denim items turn them inside out.  
Denim items bleed at the first few washes. Wash dark and  
light colored items separately.  
Detergent  
Load size  
Liquid color detergent  
7.7 lbs (3.5 kg)  
Towelling 203°F to 140°F (95°C to 60°C)  
Tip  
Use color detergent for dark colored laundry  
Detergent  
Load size  
Drain  
Universal detergent  
12.1 lbs (5.5 kg)  
To drain the water from the drum  
Spin  
Please select an appropriate spin speed  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Additional programs  
The following programs can be added from the "Settings - Supervisor level"  
when activated by Technical Service.  
Kitchen linen 203°F to 140°F (95°C to 60°C)  
Items  
Kitchen linen made from cottons and linen, i.e. chef jackets and  
pants, towels, rags  
Tip  
Use the "Pre-wash" program for tough stains. Use a pre-wash  
detergent with enzymes.  
Detergent  
Load size  
Universal detergent  
7.7 lbs (3.5 kg)  
Table linen 140°F to 86°F (60°C to 30°C)  
Items  
Table cloths and napkins made of cottons, linen or mixed  
fabrics.  
Tip  
Use the "Pre-wash" program for tough stains. Use a pre-wash  
detergent with enzymes.  
Detergent  
Load size  
Universal detergent  
14.3 lbs (6.5 kg)  
Curtains 104°F to cold (40°C to cold)  
Items  
Curtains which are machine washable according to the  
manufacturer. To rinse dust, a pre-wash without detergent is  
automatically added to the program.  
Tip  
Curtains that wrinkle easily should be washed at a reduced spin  
speed or without a spin .  
Detergent  
Load size  
Curtain, universal and color detergent in powder form.  
6.6 lbs (3.0 kg)  
Pillows 203°F to 104°F (95°C to 40°C)  
Items  
Washable pillows with a filling of feathers, down or synthetics.  
Tip  
Regard the fabric care label!  
Liquid detergent  
Detergent  
Load size  
1 queen and 2 twin size pillows  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Outerwear 104°F to cold (40°C to cold)  
Items  
Tip  
Outdoor clothing made from micro fibers.  
Close all zippers.  
Do not use fabric softener  
Detergent  
Load size  
Detergent for delicates  
7.7 lbs (3.5 kg)  
Proofing 104°F to 86°F (40°C to 30°C)  
Items  
To treat micro fiber, ski clothing, fine dense cotton (poplin) or table  
cloths to make them water repellent and soil resistant.  
Tip  
The item should be washed and rinsed or dried.  
To get an optimum result dry the items in a clothes dryer or iron  
them.  
Water  
repellent  
Only use water repellent that states it is "Suitable for membrane  
textiles". They are based on fluorochemicals. Do not use  
agents containing paraffin.  
Place the liquid detergent insert in compartment j an fill with  
water repellent.  
Load size  
7.7 lbs (3.5 kg)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program guide  
Disinfection programs  
Items  
Note  
Bed linen made of cottons or mixed fabrics.  
For different requirements with a temperature selection of 85°C  
(thermal) to 40°C (chemothermal) with the respective holding  
times.  
Detergent  
Use a detergent for disinfection and chemothermal disinfection.  
Regard the temperature level recommended on the packaging.  
Load size  
14.3 lbs (6.5 kg)  
Hygiene  
If a temperature lower than 55°C was selected for the last wash program or if the  
program "Spin" was selected, "Hygiene" is displayed.  
When selecting a Hygiene program  
do not put any laundry into the drum, add a small amount of detergent in  
compartment j and start the program,  
or  
select a wash program with a temperature of 60°C or higher.  
If the "Hygiene" display is disregarded, each program will run accordingly.  
Sluice 167°F (75°C) or Sluice 149°F (65°C)  
Items  
Heavily soiled items of cottons, linen or mixed fabrics.  
To remove heavy soiling the laundry will be pre-rinsed twice.  
Universal detergent  
Note  
Detergent  
Load size  
14.3 lbs (6.5 kg)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program sequence  
*Programs may vary depending on the offerings of your machine.  
Main wash  
Rinse  
Spin  
Water  
Wash  
rhythm  
Water Rinses Rins spin Final spin  
level  
level  
d
d
d
e
d
(
e
(
(
(
(
(
(
(
(
Cottons Hygiene  
Cottons Uni.  
Minimum iron  
Delicates  
a
a
a
b
a
c
d
a
a
a
a
a
a
a
b
(
(
(
e
(
(
e
(
(
(
(
(
(
(
e
(
(
(
2
2
2
2
2
2
2
2
3
3
2
2
3
3
3
1
2
3
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Sturdy  
L
L
Woollens  
Silk  
Dress Shirts  
Denim  
Disinfection*  
Kitchen linen*  
Table linen*  
Curtains 2)*  
Pillows 1)*  
Outerwear*  
Proofing*  
L
L
L
L3)  
L
L
L
Towelling  
Sluice4)*  
(
(
a
a
Spin  
d = low water level  
( = middle water level  
e = high water level  
a = normal wash rhythm  
b = Gentle wash cycle  
c = Woolens  
d = Silk  
For program sequence explanations, see the following page.  
* = Programs may be added from the "Settings - Supervisor level" when  
activated by Technical Service.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program sequence  
The washer is equipped with an  
Special features in the program  
electronic control which determines the sequence:  
load size automatically. The washer  
determines the required water  
Anti-crease  
consumption for each load depending  
on quantity and water absorbency of  
the laundry. Different program  
The drum continues to turn up to 30  
minutes after the program ends to  
prevent creases. The washer can be  
opened at any time. Exception: The  
program "Woollens" has no anti-crease  
feature.  
sequences and wash times will result.  
The program sequence shown here  
represents the basic program with a  
maximum load. Possible "Extras" are  
not considered.  
1)  
High Spin  
Before the wash program starts, a  
high spin is carried out to remove air  
from the pillows. After the spin the  
water is taken in by the compartment  
j for the main wash.  
The washer’s sequence display will  
indicate the current cycle of the  
selected wash programs.  
2)  
Pre-rinse  
To rinse dust, a pre-wash without  
detergent is automatically added to  
the program.  
3)  
Outerwear  
The items will be spun only after the  
main wash.  
4)  
Pre-rinse  
To remove heavy soiling the laundry  
will be pre-rinsed twice.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Spin  
Spin speed  
Rinse spin  
Program  
rpm  
1400  
1400  
1000  
600  
The laundry is spun after the main wash  
and between the rinse cycles.  
Reducing the final spin speed will also  
reduce the rinse spin speeds.  
Cottons Hygiene  
Cottons Uni.  
Minimum iron  
Delicates  
Sturdy  
Without final spin  
1200  
1200  
400  
^ Select "Rinse Stop" from the  
Woollens  
Silk  
sub-menu "Extras". The laundry is not  
spun and remains soaking in water.  
This will prevent wrinkles if the  
laundry is not removed immediately  
at the end of the wash program.  
Shirts  
600  
Denim  
900  
Disinfection programs*  
Kitchen linen*  
Table linen*  
Curtains*  
Pillows*  
1400  
1400  
1200  
400  
– Selecting the final spin  
The washer is set default to the  
maximum spin speed of the wash  
program. You can select a lower spin  
speed. Press "Start" to start the final  
spin.  
1400  
900  
Outerwear*  
Proofing*  
Towelling  
Sluice*  
800  
1400  
1400  
1400  
To finish the program  
Spin  
Press the a button. The water will  
be drained. Press the a door  
button to open the door.  
* = Programs can be added from the "Settings -  
Supervisor level" when activated by the Technical  
Service.  
The final spin speed can be reduced.  
The speeds above are the highest  
available.  
Deselect rinse spin and final spin  
^ Select "Without spin". The laundry is  
not spun after the final rinse but the  
water is drained away. After the drain  
cycle the washer goes immediately  
into the anti-crease cycle.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options  
The basic wash programs can be enhanced with "Extras".  
Accessing the sub-menu "Extras"  
Cottons Uni.  
140°F  
1400 rpm  
Duration 0:45 h  
Extras  
Delay Start Y  
Back A  
H
H
H
^ Press the direct select button D. The sub-menu "Extras"  
shows.  
Selecting Extras  
Cottons Uni.  
140°F  
1400 rpm  
Rinse hold  
Options  
Pre-wash  
BackA  
Starch Stop  
^ Select the desired Extras with the jog shuttle and confirm.  
– Repeat if another Extra is desired.  
– A selected Extra is marked with a tick.  
Pre-wash  
For laundry with heavy soiling e.g. dust, sand.  
Starch Stop  
The water is drained away in the last rinse and the program  
stops.  
Add the starch directly to the laundry in the drum and then  
continue the program. See "Detergent - Separate starch" for  
more information.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options  
Rinse Stop  
The washer stops after the last rinse, the laundry remains  
soaking in water. This will prevent wrinkles if the laundry is not  
removed immediately at the end of the wash program.  
Intensive*  
For laundry with normal to heavy soiling or stains.  
The total time for the wash program will be extended.  
Water plus*  
The washer comes factory set with the Extra selection "Water  
plus" activated. The water level during washing and rinsing is  
increased.  
Other settings for "Water plus" can be selected. See "Settings"  
for more information.  
* "Intensive" and "Water plus" can be added from the "Settings  
- Supervisor level" menu, when the access is activated by  
Technical Service.  
Extras which can be selected are shown in the sub-menu  
"Extras". If an Extra is not shown, it is not available for the  
selected program.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delay Start  
The delay start option allows you to select the program end  
time. The program start can be delayed from 30 minutes to  
24 hours.  
Select the sub-menu Delay Start  
Cottons Uni.  
140°F  
1400 rpm  
Duration 0:45 h  
Extras  
Delay Start Y  
Back A  
H
H
H
^ Press the direct select button E. The "Delay Start" menu  
shows.  
Select the Delay Start time  
The program end can be selected in 30 minute steps.  
Cottons Uni.  
140°F  
1400 rpm  
Start time:  
Finish:  
15:45  
16:30  
12:03  
^ Select the desired program end time with the jog shuttle  
and confirm. The program end time is adjusted to the next  
full or half hour. The program start will be delayed  
according to the desired program end time.  
Starting the Delay Start  
^ Press the "Start" button.  
The elapsed delay start time is displayed and will count down  
in minutes.  
Canceling the Delay Start  
^ The Delay Start can be canceled with the direct select  
button G.  
After the program start the actual load size is measured.  
This can result in an earlier program end.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Favorites  
The washer has the option to save the most used wash  
programs on the direct select buttons. The option "Save"  
must be selected in the "Settings - Supervisor level".  
Contact Technical Service for access to this level.  
Selecting/Changing a Favorite  
Main menu  
1
Cottons Uni.  
Minimum iron  
Delicates  
140°F  
104°F  
104°F  
86°F  
Program selection  
2
3
4
Settings  
F
Woollens H  
12:00  
^ Press the direct select button D.  
Basic menu  
Cottons Uni.  
140°F  
1400 rpm  
Duration 0:45 h  
Extras  
Delay Start  
Save  
H
Back A  
H
Y
H
H
^ Turn the jog shuttle to select the component you want to  
adjust: program, temperature or spin speed.  
^ Press the jog shuttle to confirm the selection.  
Depending on the selection the display shows one of the following  
submenus.  
Important: If no selection is made in the sub-menu, the  
display will switch back to the basic menu after 20  
seconds.  
– Select a program  
Program  
selection  
BackA  
Cottons Hygiene  
Cottons Uni.  
Minimum iron  
H
^ Select the desired program with the jog shuttle and  
confirm. The basic menu shows again.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Favorites  
– Selecting a temperature  
Cottons Uni.  
140 °F  
1400 rpm  
Temperature  
cold - 60°C  
a
^ Select the desired temperature with the jog shuttle and  
confirm. The basic menu shows again.  
– Selecting the spin speed  
Cottons Uni.  
140 °F  
1400 rpm  
Spin speed  
0 - 1400 rpm  
t
^ Select the desired spin speed with the jog shuttle and  
confirm. The basic menu shows again.  
Selecting Extras  
^ Press the direct select button D. The sub-menu "Extras"  
shows.  
Cottons Uni.  
140°F  
1400 rpm  
Rinse hold  
Options  
Pre-wash  
BackA  
Starch Stop  
^ Select the desired Extras with the jog shuttle and confirm.  
The basic menu shows again. Repeat if another Extra is  
desired. See "Extras" for more information.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Favorites  
Saving a Favorite  
The basic menu shows all selected components.  
Cottons Uni.  
104°F  
1400 rpm  
Pre-wash  
Duration 00:53:00 h  
Extras  
Delay Start Y  
Save  
H
Back A  
H
H
H
^ Press the direct select button F.  
Assigning a direct select button  
Cottons Uni.  
104°F  
1400 rpm  
Pre-wash  
until now  
Saving to  
:
:
Cottons Uni.  
60°C  
1400 rpm  
1
2
3
4
BackA  
^ Select the desired number for the favorite with the jog  
shuttle and confirm. The favorite is saved with the individual  
selections and shows in the main menu.  
To assign more favorites, repeat the process with the  
remaining direct select buttons.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
Only use laundry detergent formulated  
for front loading washing machines.  
Water hardness  
Hardness  
level  
Water  
quality  
Water  
Water  
hardness in hardness  
For wool and wool blend fabrics use a  
detergent formulated for wools.  
gpg  
(also German  
hardness in  
°d)  
in mmol/l  
Follow instructions on the detergent  
packaging for the correct use and  
amount of detergent.  
I
soft  
0 - 7  
7 - 14  
0 - 1.3  
1.3 - 2.5  
over 2.5  
II  
moderate  
III  
hard to  
over 14  
The amount of detergent used  
depends on the level of soiling:  
very hard  
Light soiling  
No soiling or stains are visible.  
Water softener  
If the water hardness level is between II  
and III, you can soften the water to  
reduce detergent consumption.  
Normal soiling  
Some visible soiling or a few light  
stains.  
The detergent packaging should  
indicate the correct amount to use in  
your machine. Add the detergent, then  
add the water softener. From then on  
you can then use the recommended  
amount of detergent for water hardness  
level I.  
Heavy soiling  
Very visible soiling or stains.  
The size of the load and the water  
hardness level in your area have an  
impact on the amount of detergent  
necessary to obtain optimum wash  
results. If you do not know the water  
hardness level in your area, contact  
your local water authority.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detergent  
Fabric softener, liquid starch  
Separate starch  
Fabric softener added to the wash  
program will make fabrics feel softer  
and will reduce static cling in the dryer.  
^ Dispense the amount of starch  
recommended on the packaging.  
^ Select the Extra "Starch" before  
Liquid starch is a synthetic starch wash  
used to give fabrics some stiffness.  
Starch can be included in any wash  
program as part of the final rinse.  
starting a program.  
The program and the remaining time  
will stop. The display shows "Starch".  
^ Dispense the starch directly in the  
drum.  
Automatic dispensing of fabric  
softener or liquid starch  
^ Select a spin speed and confirm or  
press the "Start" button.  
Dye removers / Fabric dyes  
Do not use dye removers in this  
washer.  
^ When dying fabrics in the washer,  
adhere to the manufacturer’s  
instructions.  
External dispensing  
As an option the washer can be  
connected to an external detergent  
dosage system. A conversion kit is  
necessary which can be purchased  
from Miele.  
^ Add the fabric softener or liquid  
starch to compartment §. Do not  
exceed the Max. level mark.  
The softener or liquid starch is auto-  
matically dispensed in the final rinse. At  
the end of the program a small amount  
of water remains in the fabric softener  
compartment §.  
If you use starch frequently, clean the  
dispenser compartment and especially  
the siphon tube and conditioner  
channel. See "Cleaning the detergent  
drawer".  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
,Before cleaning the appliance,  
disconnect the power supply by  
unplugging the unit or manually  
tripping the circuit breaker.  
,Do not use chemical solvents,  
abrasive cleaners, glass or all  
purpose cleaners. These can  
damage plastic surfaces and other  
parts.  
Cleaning the washer  
^ Pull out the detergent drawer as far  
as it will go. Press the red release  
lever down and pull the drawer out of  
the machine.  
^ Clean the exterior of the washer with  
a mild solution of non-abrasive  
detergent or soap and water. Wipe  
dry with a soft cloth.  
^ Clean the drum with a stainless steel  
cleaner specially formulated for use  
in a washing machine.  
Cleaning the detergent drawer  
Detergent residue should be cleaned  
out regularly.  
^ Clean the detergent drawer with  
warm water.  
^ Clean the siphon tube.  
1. Remove the siphon tube from the  
compartment § and rinse under warm  
water. Clean the pipe on which the  
siphon tube is attached.  
2. Replace the siphon tube.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the inlet hose filter  
Slowly turn on the faucet and check  
for leaks. If water leaks, tighten the  
hose connection.  
The washer has two water inlet filters to  
protect each inlet valve. Check and  
clean these filters every 6 months. This  
may have to be done more frequently  
with some water supplies.  
Cleaning the filter in the inlet valve  
^ Using pliers carefully loosen and  
remove the plastic hose connector  
from the inlet valve.  
Cleaning the inlet hose filters  
^ Turn off the water faucet.  
^ Unscrew the inlet hose from the valve  
by turning the connector  
counterclockwise using a wrench if  
necessary.  
^ Using needle nose pliers, remove the  
plastic filter by pulling on the bar (see  
illustration). Rinse under running  
water and return. Replace the filter  
and seal then reconnect the hose.  
^ Remove the rubber seal, 1, from the  
connector.  
Both filters must be put back in  
place after cleaning.  
^ Using needle nose pliers, grasp the  
plastic filter, 2, and pull it out of the  
hose connector.  
^ Clean the filter under running water  
and carefully remove any large  
particles.  
^ Replace the filter and seal and  
reconnect the hose.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
,Repairs to electrical appliances must only be carried out by a qualified and  
trained person in accordance with local and national safety regulations.  
Repairs and other work by unqualified persons could be dangerous. The  
manufacturer cannot be held responsible for unauthorized work.  
The following section will help you avoid placing a service call by identifying  
issues you may encounter while operating the machine:  
A wash program cannot be started  
Issue  
Possible fault  
Solution  
Possible fault  
The display remains off. The washer has no  
power.  
the washer is not  
connected to the electrical  
supply,  
the circuit breaker has  
tripped.  
Upon selecting the  
program "Spin" the  
The instructions in  
"Before using for the described in the "Before using  
Follow the instructions as  
program does not start. first time" were not  
for the first time" chapter.  
followed.  
There is a fault  
message in the display. message is  
displayed, a program  
As long as an error  
Regard the display  
messages.  
Confirm by pressing the jog  
cannot be started.  
shuttle.  
The display is dark and The machine goes  
the "Start" light flashes into "Standby". The  
Press any direct select button.  
The Standby function will be  
ended.  
slowly.  
display shuts off to  
save energy.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
General problems with the washer  
Issue  
Possible cause  
Solution  
The washer shakes  
during the spin cycle.  
The four feet are not  
resting evenly on the  
floor.  
Level the machine (see  
Installation Instructions).  
The floor is not  
It is recommended that  
the machine is installed  
on a concrete base.  
properly reinforced.  
There are unusual  
sounds coming from  
the drain pump.  
There is no fault. Lapping sounds at the beginning  
and end of the pump process are normal.  
Large residues of  
The water pressure is too Check and clean the  
detergent remain in the low.  
dispenser drawer  
filters in the water inlet  
hoses.  
Select the "Water plus"  
Extra if desired.  
Water softening  
Clean the detergent  
detergent additives tend drawer. In the future add  
to clump.  
the detergent first and then  
the water softener to the  
compartment.  
The fabric softener is  
not completely  
The siphon tube is either Clean the siphon tube, see  
incorrectly positioned or "Cleaning and care-  
dispensed or too much clogged.  
water remains in the  
Cleaning the detergent  
dispenser drawer".  
compartment §.  
The display shows a  
foreign language.  
A different language was Select the desired  
selected under  
language. The flag symbol  
leads you to the setting.  
"Settings-Language J".  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Poor wash results  
Issue  
Possible cause  
Solution  
The laundry does not  
get clean with liquid  
detergent.  
Liquid detergents do  
not contain bleaching  
agents. Fruit, coffee  
and tea stains may not  
be removed.  
Use powder bleach.  
(Be sure this is suitable  
according the fabric care  
labels of the laundry.)  
Fill compartment j with  
powder bleach and use a  
dispenser ball for the  
liquid detergent.  
Never put liquid  
detergent and bleach  
together in the same  
wash compartment.  
Laundry has a gray  
sticky residue.  
Not enough  
Add more detergent to  
laundry with grease  
stains or use a liquid  
detergent.  
detergent was used  
to dissolve greasy  
deposits in heavily  
soiled laundry.  
The laundry was  
soiled with grease  
(oils, lotions).  
Run a 140°F program  
with liquid detergent to  
clean the washer before  
using it for laundry again.  
There is white detergent The powder detergent After drying, remove  
residue on dark laundry. was not completely  
dissolved because of  
hard water. These  
white residues with a  
clothes brush.  
In the future, use liquid  
residues are difficult to  
remove.  
detergent.  
Items with greasy  
Add a Pre-wash to the program. Use liquid  
soiling are not clean  
after a wash program.  
detergent for the pre-wash.  
Use a powder detergent for the main wash.  
Use detergent which is specially formulated for  
heavily soiled work clothes. Contact the detergent  
manufacturer for more information.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
The door will not open when the "Door" button is pressed  
Issue  
Solution  
The washer has no power. Insert the plug into the outlet and ensure the circuit  
breaker has not tripped.  
Power failure  
To open the drum door, see "Frequently asked  
questions - Opening the drum door during a power  
failure...".  
The door was not  
properly closed.  
Push the drum door on the locked side. Then press  
the "Door" button.  
There is still water in the Clean the drain filter and the drain pump as  
drum and the washer  
cannot drain it away.  
described in "Frequently asked questions -  
Opening the drum door during a power failure...".  
As a safeguard against scalding, the drum door cannot be opened if the wash  
water temperature is over 131°F (55°C).  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Opening the door during a  
power failure or when the drain  
is blocked  
Machines with a drain pump  
If the main drain hose is clogged, water  
will be retained in the machine (max.  
6.5 gal [30 l]).  
,Disconnect the machine from the  
power supply.  
,Caution: If laundry has been  
washed at a high temperature, the  
water draining out of the machine  
will still be hot! Stop and allow it to  
cool before proceeding.  
^ Open the detergent dispenser  
drawer.  
^ Place a 2 quart capacity container  
under the drain tube.  
^ Remove the tool.  
^ Turn the lint trap lid counterclockwise.  
Do not remove it. About 2 quarts of  
water will drain out of the hose.  
If additional water remains in the  
machine, tighten the lint trap lid and  
empty the container. Repeat as  
necessary.  
^ Open the lint trap door.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Once the flow of water stops:  
If the drain filter is not tightened  
securely water will leak out when the  
machine is used.  
Open the drum door  
,Always make sure the drum is  
stationary before reaching into the  
drum to remove laundry. A moving  
drum is extremely dangerous.  
^ Remove the lint trap lid.  
^ Remove any foreign objects or lint  
from the filter.  
^ Insert a screwdriver into the notch,  
beside the lint trap, pull it down. The  
door will now open.  
^ Check that the impeller (in the back  
of the chamber) rotates freely by  
spinning it with your hand.  
^ Return the lint trap lid and tighten into  
place.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Machines with a drain valve  
Open the drum door  
,Always make sure the drum is  
stationary before reaching into the  
drum to remove laundry. A moving  
drum is extremely dangerous.  
^ Press the lever for the emergency  
drain down and hold until you hear  
no more water running out.  
^ Insert a screwdriver into the notch,  
beside the lever, pull it down. The  
door will now open.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently asked questions  
Changing the light bulb  
The machine will not operate if the light  
bulb is burnt out.  
^ Disconnect the power supply to the  
work area by unplugging the unit,  
tripping the circuit breaker or  
removing the fuse.  
^ Open the detergent dispenser  
drawer. Remove the tool from the rear  
side of the panel.  
^ Press together the hooks of the  
plastic fitting, 2, to separate it from  
the bulb,1.  
^ Open the drum door.  
^ Replace the bad light bulb with a  
new one.  
A replacement bulb can be obtained by  
contacting Miele.  
The light bulb must not exceed the  
maximum wattage listed on the data  
plate.  
^ Insert the light bulb into the plastic  
fitting.  
^ Insert the drum lighting in the socket  
and turn clockwise.  
^ Insert the tool into the slit of the light  
bulb, turn counterclockwise until  
resistance is felt.  
To use the washer it is absolutely  
necessary to have the light bulb  
properly installed.  
^ Pull out the drum lighting.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
Repairs  
PC Update  
In the event of a fault which you cannot  
fix yourself, please contact the Miele  
Technical Service Department.  
The indicator marked PC allows a  
technician to make use of new  
technology if new programs are  
developed or new fabrics are  
introduced.  
U
1-800-999-1360  
V
1 800 565-6435  
Optional accessories  
Optional accessories are available at  
your Miele dealer or Miele.  
When contacting the Technical Service  
Department, please quote the model  
and serial number of your appliance.  
Both can be found on the data plate  
visible above the front glass on the  
inside of the door.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
To prevent accidents  
and machine damage  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Front view  
a Water intake hose hot  
b Water intake hose cold  
c Electrical connection  
d Control panel  
g Access panel to drain filter, drain  
pump and emergency door release  
h Height adjustable feet  
i Stand  
j Retaining clips (for concrete stand)  
k Recessed grip  
e Detergent dispenser drawer  
f Drum door  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Rear view  
a Lid with transport grips  
b Mounting for:  
d Shipping struts with rotary protectors  
e Water intake hose (cold)  
f Water intake hose (hot)  
– Water intake hose  
– Drain hose  
g Drain hose for drain pump  
h Drain hose for drain valve  
i Height adjustable feet  
– Withdrawn shipping struts  
c Power cord  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Washer/ Dryer Stack  
Installation on a base  
The machine can be installed on an  
open or closed steel base, or on a  
concrete base. Concrete is  
recommended.  
^ Secure the two front feet of the  
washer with the supplied retaining  
clips when installing on a concrete  
base.  
^ Read the supplied Installation  
manual.  
Coin mechanism  
The dryer can be equipped with a coin  
mechanism*.  
Height:  
Stacking kit with pull out shelf  
The reprogramming necessary for the  
coin mechanism must be done by a  
Miele Service Technician.  
66 15/16" (1700 mm)  
The Miele washing machine can be  
installed as part of a washer-dryer  
stack in combination with a Miele  
tumble dryer. An appropriate stacking  
kit* is required.  
Empty the coin mechanism regularly.  
Coins or tokens may get jammed.  
Installation of the stacking kit must be  
performed by a Miele Service  
Technician.  
Do not install devices to auto-  
matically turn the washer off, e.g. a  
clock timer.  
Reinstallation of the machine lid  
When reinstalling the appliance lid,  
check the firm fit of the cover at the rear  
bracket for a safe transport of the dryer.  
* Available from your Miele dealer or  
Miele.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation site  
Installation  
^ Use the front washer feet and the rear  
excess end to transport the washer  
from its shipping pallet to the  
installation site.  
Do not lift the washer by the drum  
door.  
The washer cannot be built-in.  
,Do not install the machine  
directly next to or over an open floor  
drain or drain channel. Moisture can  
penetrate the machine and damage  
electrical parts.  
,Ensure that the machine’s feet  
and the floor are dry to prevent  
slippage during the spin cycle.  
A concrete floor is the most suitable  
surface for the washer. Concrete floors  
are less prone to vibration during the  
spin cycle than wooden floors.  
Removing the shipping struts  
^ Remove the left and right rotary  
protectors.  
,If the machine is installed on a  
masonry or concrete base it must  
be secured with retaining clips to  
prevent the washer from vibrating off  
the stand during the spin cycle.  
^ The machine must be leveled and  
securely positioned.  
^ To avoid vibration while spinning, the  
machine should not be installed on  
soft floor coverings.  
In case the installation must be on a  
wooden joist floor:  
^ Install the unit on a 27 9/16" x 23 5/8" x  
1 3/16" (70 x 60 x 3 cm) plywood  
base. Ideally the base should be  
large enough to span several joists  
and should be anchored to the joists  
and not just the floor boards.  
1. Unhook the rotary protector with a  
screw driver.  
2. Remove the rotary protectors.  
It is best to install the washer in the  
corner of a room, where the stability of  
the floor is at its greatest.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Turn the left shipping strut  
counterclockwise 90° with the  
enclosed combination wrench.  
^ Turn the right shipping strut  
counterclockwise 90° with the  
enclosed combination wrench.  
^ Pull the shipping strut out.  
^ Pull out the shipping strut out.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
,Movement of the washer without  
the shipping struts in place should  
be kept to a minimum. The shipping  
struts should be stored on the back  
of the washer for future use. They  
must be reinstalled before moving  
the machine.  
Installing the shipping struts  
^ Reinstall the struts by reversing the  
installation procedure.  
^ Close the holes with the rotary  
protectors and their caps.  
^ Fasten the shipping struts at the rear  
side of the washer. Take care to insert  
the drill holes, b, into the clamps, a.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Leveling the washer  
Adjust the four leveling feet  
The washer is leveled by adjusting the  
four feet. The machine is boxed with the  
feet completely screwed in.  
To ensure smooth operation the washer  
must be level.  
Failure to level the machine can result  
in increased water and energy  
consumption as well as the washer  
"banging" during the spin cycle or  
"walking" across the floor during use.  
^ Turn the locking nut, 2, counter-  
clockwise with the enclosed  
combination wrench. Unscrew each  
of the four feet as much as necessary  
by turning both the foot, 1, and the  
locking nut, 2, to the left.  
^ Check that the machine stands level.  
^ Once level, hold the foot, 1, steady  
with a wrench. Turn the locking nut, 2,  
with the combination wrench towards  
the machine.  
,All four locking nuts must be  
tight against the bottom of the  
machine. In addition, check to see  
that the feet were not inadvertently  
unscrewed while tightening the nuts.  
Running a machine that is not level  
or whose feet are not tight may  
cause damage to both the machine  
and its surrounding area.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Water connection  
Maintenance  
Replace the water hoses only with  
genuine Miele hoses.  
Cold water connection  
A water faucet with 3/4" threat must be  
provided on-site. If none is available the Extension hoses  
machine must be connected to a water  
line by a qualified plumber.  
Extension hoses (8’ 2" or 13’ [2.5 m or  
4 m]) may be obtained from Miele.  
The water pressure must be between  
14.5 -145 psi (1 -10 bar). If the water  
pressure is greater than 145 psi  
(10 bar), a pressure reducer must be  
installed. If the water pressure is below  
15 psi (1 bar), there will not be enough  
water available for a complete fill.  
The cold water hose (blue mark) is  
not suitable for a hot water  
connection.  
^ Connect the cold water intake hose  
(blue mark) to the cold water valve.  
^ Turn on the valve(s) and check for  
leaks.  
The water intake hoses are  
equipped with screen filters. Do not  
remove these filters except for  
cleaning.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Hot water connection  
If the washer is not to be installed for  
hot water connection, the settings "Main  
wash", "Pre-wash" and "Rinse" must be  
adjusted respectively. The hot water  
intake hose must be removed.  
Connecting the machine to a hot water  
supply will lead to low electrical  
consumption during hot water  
operation. The hot water temperature at  
the water faucet must not exceed 158°F ^ Select in "Settings - Supervisor level"  
(70°C).  
the respective options "cold".  
The water in single water lines from the  
hot water source cools faster when not  
in constant use. To heat the wash water  
more electricity must be used. The  
same conditions for the hot water as for  
the cold water connection will then  
apply.  
The program times may be  
extended.  
^ Unscrew the hot water intake hose  
(red mark).  
^ Screw on the supplied stopper.  
^ Connect the hot water intake hose  
(red mark) to the water faucet.  
The connection of the machine to a  
hot water line only, is not possible for  
functional reasons.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Drainage  
If necessary the drain hose can be  
extended up to 16’ 5" (5 m). The hose  
extension can be purchased from your  
Miele dealer or Miele.  
There are two drainage options for this  
machine:  
Drain valve  
The drain pump must be replaced for  
drain heights over 3 ft (1 m). The  
maximum allowable drain height is 5 ft  
11 in (1.8 m). A stronger pump for  
these heights can be purchased from  
your dealer or Miele.  
The machine is drained with a  
motorized drain valve. A connection  
can be made to an on-site floor drain  
(gully with an air gap) on an angle.  
Drain pump  
The wash water is drained using a  
pump with a 3 ft (1 m) delivery height.  
Make sure there are no kinks in the  
drain hose. The elbow on the end of the  
drain hose can be turned or removed if  
necessary.  
Possible connections:  
1. Directly into a sink: Hook the hose  
over the edge of the sink and secure  
it firmly (e.g. by tying the hose to the  
water faucet).  
2. To a stand pipe: Place the drain  
hose into a 11/2" (4 cm) stand pipe  
and secure it firmly.  
3. To a floor drain: The machine is  
equipped with an air gap/  
anti-siphoning system so that no  
minimum drain height is required.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Electrical connection  
For Canada only:  
If the machine is hard wired, two 20 A  
circuit breakers must be provided  
on-site. Switches with a contact gap of  
more than 3 mm are valid as  
separators. All components must be  
CSA or UL approved.  
,This installation should be  
performed by an experienced and  
qualified technician, in accordance  
with local codes and regulations.  
The washer comes with a power cord  
without a plug.  
The machine is supplied as standard  
for connection to a 208 V, 60 Hz, 20 A,  
2-phase electrical supply*.  
For extra safety it is advisable to install  
a residual current device (RCD) with a  
trip current of 30 mA.  
The machine must only be connected  
to the voltage and frequency shown on  
the data plate.  
,*To convert the machine to  
another electrical connection,  
please read the converting manual  
on the wiring diagram inside the  
washer. The conversion must be  
performed by a Miele Service  
Technician. Additionally the "Heating  
level" setting must be adjusted.  
,Do not install devices to  
automatically turn the washer off,  
i.e. a clock timer.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Data  
Height  
33 7/16" (85 cm)  
23 7/16" (59.5 cm)  
28 3/8" (72 cm)  
44 1/8" (112 cm)  
240 lbs (109 kg)  
Width  
Depth  
Depth with the door open  
Weight  
Maximum floor load  
Capacity  
2778 Newton (approx. 278 kg)  
14.3 (6.5 kg) dry laundry  
see data plate  
Fuse rating  
Rated load  
Fuse rating  
see data plate  
see data plate  
Noise level during spinning  
(Noise emission 3. GSGV)  
< 70 dB(A)  
Minimum water flow pressure  
Maximum water pressure  
Length of intake hose  
14.5 psi (1 bar)  
145 psi (10 bar)  
5’3" (1.6 m)  
Length of power cord  
5’3" (1.6 m)  
Drain height maximum (Drain pump)  
Light bulb for drum light  
3’ 3 3/8" (1 m)  
Type G4 (5 Watts/12 Volt)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Help to protect the environment  
Disposal of the packing  
materials  
Disposal of an old appliance  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
The cardboard box and packing  
materials protect the appliance during  
shipping.  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal. Before discarding an old  
appliance, unplug it from the outlet, cut  
off its power cord and remove any  
doors to prevent hazards.  
To prevent suffocation of children  
ensure that any plastic wrapping, bags,  
etc. are disposed of safely and kept out  
of the reach of children.  
Please recycle.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Settings J  
to adjust standard settings  
The washer controls can be adjusted to changing demands through the settings  
menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings J  
Opening the menu Settings  
1
Cottons Uni.  
Minimum iron  
Delicates  
140°F  
104°F  
104°F  
86°F  
Program selection  
2
3
4
Settings  
F
Woollens H  
12:00  
^ Select the "Settings" J in the main menu and confirm by  
pressing the jog shuttle.  
Selecting Settings  
Settings  
BackA  
Language F  
Water plus  
Suds cooling  
H
^ Select the settings to be changed and confirm.  
If no selection was made in the sub-menu, the display will  
switch back to the "Settings" menu after 20 seconds.  
Leaving the Settings menu  
^ Press "Back" and confirm. The display shows the main  
menu.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings J  
Language J  
Suds cooling  
The display contents can be shown  
in different languages.  
Cold water is added at the end of  
the main wash to cool the wash  
water.  
The displayed language can be set in  
the sub-menu "Language" J.  
Suds cooling is carried out when a  
wash temperature of 158°F (70°C) or  
more is selected.  
^ Select the desired language and  
confirm with "OK".  
Suds cooling should be activated when  
the drain hose is hung into a sink, to  
prevent scalding.  
The flag behind the word "Language" is  
a guide to find the settings menu in  
case a foreign language is shown.  
Suds cooling is factory set turned on.  
If the language setting was changed, it  
is only valid for the current wash  
program. Once the program ends, the  
display will show the language which is  
set under "Settings - Supervisor level".  
Water plus  
In the setting "Water plus" you can  
select an extra setting from below.  
Water plus  
The water level increases (more water)  
in the wash and rinse cycles of the  
program (delivery status).  
Additional rinse  
An extra rinse cycle is added in the  
programs "Cottons Hygiene", "Cottons  
Uni." and "Minimum iron".  
Water+ and Add. rinse  
The water level is increased in the wash  
and rinse cycles and an extra rinse  
cycle is added to the programs  
"Cottons Hygiene", "Cottons Uni." and  
"Minimum iron".  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings J  
Time of day  
Contrast  
The selection allows the clock to be  
shown as 24 hours, 12 hours or not  
at all. The time of day is also set  
here.  
The contrast of the display can be  
set at ten different levels.  
The machine is factory set to level 4.  
The contrast changes immediately  
when a different level is selected.  
If the clock is not selected the delay  
start can only be shown only as a 24  
hour clock timer. The display will how  
the timer counting down until the start  
of the program but not he current time  
of day.  
^ Confirm the setting with the jog  
shuttle.  
Brightness  
Selecting the clock  
^ Select the clock display and confirm.  
The brightness of the display can be  
set at ten different levels.  
The display changes to the time of day  
setting.  
The machine is factory set to level 5.  
Set the time of day  
The brightness changes immediately  
when a different level is selected.  
^ Select the current hour with the jog  
shuttle and confirm. Repeat with  
setting the minutes and confirm.  
Press again to save the time of day.  
^ Confirm the setting with the jog  
shuttle.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings J  
Standby  
Memory  
The display goes out after 10  
minutes and the "Start" button  
flashes slowly to save energy.  
The Memory function remembers the  
addition of an extra feature to a  
program, a change in spin speed or  
the temperature the next time that  
program is selected.  
On  
The display will go into Standby mode:  
Once the wash program is selected  
again the washer shows the saved  
options.  
– if no program was selected after the  
machine was turned on.  
The memory function is not active when  
favorites are selected with the direct  
select buttons.  
– after a program has started.  
– at the end of a program.  
The Memory function is factory set "off".  
Not in current prog.  
(Factory default)  
The Standby function will be turned on  
if no program was selected after the  
machine was turned on.  
Temperature unit  
The temperature can be shown in  
"°C/Celsius" (factory default) or  
"°F/Fahrenheit".  
By turning the jog shuttle or pressing  
any button the display is turned on  
again.  
The delivery status is "°C".  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
The menu Settings - Supervisor level must be activated  
by the Technical Service.  
The menu "Settings" (except Languages J) is locked with a  
code to prevent unwanted access.  
Selecting Settings  
Settings  
BackA  
Language F  
Supervisor level  
^ Select "Supervisor level" and confirm.  
Settings  
BackA  
Supervisor level  
Access via code  
^ Select "Access via code" and confirm.  
Entering the code  
^ Enter the code "0 0 0" (factory default).  
If a wrong code is entered three times, the code entry will  
be locked for 1 hour!  
0
_ _  
Enter code  
^ Turn the jog shuttle until the first digit shows. Confirm the  
digit. Enter the second and third digit.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
Confirming the code  
0 0 0  
Confirming the code  
OK  
H
Back A  
H
^ Confirm the entered code.  
W
Entry OK  
Menu opened  
The user is now in the "Supervisor level". The previously  
described and all the following settings can be changed.  
Change the code to prevent unauthorized access to the  
settings.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
Language J  
Language menu  
The display contents can be shown  
in different languages.  
This option allows you to display an  
additional welcome screen which  
requests a language selection. The  
screen can be shown before the  
main menu or after the end of a  
wash program.  
The fixed default language can be set  
in the sub-menu "Languages J".  
^ Select the desired language and  
confirm with "OK".  
Two options can be selected:  
– International: Welcome screen  
shows, an additional language has to  
be selected.  
Sort languages  
– National: no additional welcome  
screen (factory default).  
The language order can be set,  
when the option "Language access -  
international" is selected.  
Intensive Water plus  
Supervisor level  
You can select this option if the  
Extras "Intensive" and "Water plus"  
are shown in the menu "Extras".  
The access code for the supervisor  
level can be changed.  
The option is factory set "off".  
^ Enter the old code.  
^ Enter the new code.  
Once the new code is confirmed, the  
display will show the beginning of the  
"Settings" menu.  
Save  
The option "Save" can be shown in  
the main menu. The function "Save"  
is needed to save for example the  
favorite wash programs on the direct  
select buttons.  
The machine comes factory set with  
this option turned off.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
Auto load control  
Main wash water  
The washer has an Auto load  
The water type for the main wash  
can be selected (except for the  
programs "Woollens", "Silk" and  
"Curtains"). The hot water intake will  
be only accessible at a wash  
control. The water levels and the  
program running times are adjusted  
to the load size. If the load size  
automatic is turned off the program  
will always run as if for a full load.  
temperature of 86°F/30°C or higher.  
The machine comes factory set with  
this option turned on.  
The machine comes factory set with the  
water type "hot".  
If the washer is not connected to hot  
water, the program running times will  
be extended and vary from the  
displayed remaining times.  
Pre-wash water  
The water type for the pre-wash can  
be selected (except for the program  
"Curtains"). The hot water intake will  
be only accessible at a wash  
temperature of 86°F (30°C) or  
higher.  
If "Industrial water" is used, the  
washer must be refitted accordingly.  
The machine comes factory set with the  
water type "hot".  
Rinse water  
The water type for the rinse in the  
programs "Cottons Hygiene",  
"Cottons Uni.", "Minimum iron", "Table  
linen", "Kitchen linen", "Towelling"  
and "Sluice" can be selected. The  
hot water intake will be only  
accessible at a wash temperature of  
50°C or higher.  
The machine comes factory set with the  
water type "hot".  
If "Industrial water" is used, the  
washer must be refitted accordingly.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
Water level Cottons  
Pre-wash duration  
The program "Cottons Hygiene" and  
"Cottons Uni." allows you to increase  
the water level for the main wash.  
The wash time for the pre-wash can  
be extended.  
The machine comes factory set with the  
The machine comes factory set with the option Block Parameter selected. (The  
option Block Parameter selected. (The  
water level will be controlled according  
to the factory set program data.)  
water level will be controlled according  
to the factory set program data.)  
Wash time Cottons  
Water level Min. iron  
The programs "Cottons Hygiene"  
and "Cottons Uni." allow to increase  
the water level for the main wash.  
The program "Minimum iron" allows  
to increase the water level for the  
main wash.  
The machine comes factory set with the  
The machine comes factory set with the option Block Parameter selected. (The  
option Block Parameter selected. (The  
water level will be controlled according  
to the factory set program data.)  
water level will be controlled according  
to the factory set program data.)  
Min. iron  
Pre-wash temp. Cot.  
The program "Minimum iron" allows  
to extend the wash time for the main  
wash.  
The Pre-wash temperature for the  
programs "Cottons Hygiene" and  
"Cottons Uni." can be selected.  
The machine comes factory set with the  
The machine comes factory set with the option Block Parameter selected. (The  
option Block Parameter selected. (The  
water level will be controlled according  
to the factory set program data.)  
water level will be controlled according  
to the factory set program data.)  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
No. of programs  
Disinfection  
Additional programs can be added  
to the program selection.  
Special disinfection programs can  
be added.  
0 Additional programs (factory default) 0 Additional programs (factory default)  
4 Additional programs ("Table linen",  
"Pillows", "Curtains" and "Kitchen  
linen")  
4 additional programs (Thermal  
disinfection 15 min/185°F (85°C),  
Chemo thermal disinfection 10  
min/158°F (70°C), Chemothermal  
disinfection 20 min/140°F (60°C) and  
Chemothermal disinfection 30  
min/104°F (40°C)).  
2 Additional programs ("Outerwear"  
and "Waterproofing")  
6 Additional programs (all of the  
above).  
Pre-wash  
Hygiene  
In the programs "Cottons Hygiene",  
"Cottons Uni." and "Minimum iron"  
you can select to permanently add a  
pre-wash to the cycle or to select it  
in the menu "Extras".  
If the last used program had a  
temperature of 131°F (55°C) or less,  
the display shows the request to  
start the "Hygiene" program.  
The machine comes factory set with  
this option turned off.  
The machine comes factory set with the  
option "Menu selection" activated.  
Sluice  
2. Pre-wash Kitchen linen  
When the option is selected the  
sluice programs are offered  
additionally.  
The program "Kitchen linen" allows  
an additional pre-wash.  
Add the detergent for the additional  
pre-wash directly in the drum.  
The machine comes factory set with  
this option turned off.  
The machine comes factory set with  
this option turned off.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
Optimize energy  
Pre-rinse Cottons  
The energy use for the programs  
"Cottons Hygiene", "Cottons Uni."  
and "Minimum iron" is at its optimum  
when this option is turned on.  
The programs "Cottons Hygiene"  
and "Cottons Uni." allows you to add  
a pre-rinse of the laundry.  
The machine comes factory set with  
this option "off".  
The machine comes factory set with  
this option "on".  
Pre-rinse Min. iron  
No. rinses Cottons  
The program "Minimum iron" allows a  
pre-rinse of the laundry.  
The programs "Cottons Hygiene"  
and "Cottons Uni." allow you to  
change the number of rinse cycles.  
The machine comes factory set with  
this option "off".  
2 rinses (factory default)  
3 rinses  
4 rinses  
5 rinses  
Spin free of charge  
When operated by a coin  
mechanism, the program "Spin" can  
be activated free of charge.  
No. rinses min. iron  
The machine comes factory set with  
this option "off".  
The program "Minimum iron" allows  
you to change the number of rinses.  
2 rinses (factory default)  
3 rinses  
4 rinses  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings - Supervisor level  
No detergent  
Leaving the Settings menu  
^ Press "back" and confirm. The  
display shows the main menu.  
If an external dispensing system is  
fitted to the machine it will not be  
accessed if "No soap" is selected.  
You have the option to show the  
Extra "No Soap" in the menu "Extras".  
The machine comes factory set with  
this option "off".  
External dispenser  
The washer is set up for connection  
to an external dispensing system. To  
use the external dispensing system  
the setting must be adjusted/set  
accordingly.  
The machine comes factory set with  
this option "off".  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 0806  
M.-Nr. 06 523 700 / 05  
en - USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Washer Dryer WT 945 User Manual
Minolta Printer Magicolor 7450 User Manual
MTX Audio Portable Speaker T5515 44 User Manual
Numark Industries DJ Equipment EM360 User Manual
Olympus Microscope Magnifier CX41 User Manual
Orange Micro Network Card The Grappler User Manual
Panasonic CD Player SC AK610 User Manual
Panasonic Cell Phone EB X100 User Manual
Panasonic IP Phone KX NT265 User Manual
ParaBody Home Gym PBF011A User Manual