Operating and installation instructions
Fridge-freezer
with PerfectFresh zone
and Dynamic cooling
KF 9757 iD
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 472 710
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Moving the shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Split shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adjusting the condiment tray/bottle shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Universal container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Moving the bottle divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Freezing and storing food. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Maximum freezing capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Freezing fresh food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Storing frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Home freezing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Hints on home freezing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Before placing food in the freezer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Placing food in the freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Freezing large items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Freezer calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Ice cubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Cooling drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Freezer tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cool pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Defrosting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Refrigerator and PerfectFresh zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Freezer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
E-Cloth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Cleaning the interior and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Ventilation gaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Door seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Does your old appliance have a different hinging mechanism? . . . . . . . . . . . . . . 47
Building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Weight of the furniture doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Building into a peninsular run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Fitting the furniture doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aOn/Off button for switching the
refrigerator section / PerfectFresh
zone on and off separately.
fMaster switch for switching
the whole appliance on and off
gFreezer section temperature display
bRefrigerator section temperature
display
hFreezer section
temperature selector buttons
(+ for warmer; – for colder)
cRefrigerator section
temperature selector buttons
(+ for warmer; – for colder)
iSuper freeze button and indicator
light
dSuper cool button and
indicator light
jAlarm off button
eSafety lock indicator light
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aFan for Dynamic cooling
bAdjustable shelves
cPerfectFresh zone, dry compartment
dControl for setting the moisture level
in the humidity controlled
compartment
ePerfectFresh zone, humidity
controlled compartment
fButter and cheese compartment
gEgg tray/Condiment tray with
universal container
hInterior lighting
iBottle divider*
jBottle shelf
kCondensate channel and
drain hole
lFreezer drawers with
freezer calendar
* Depending on model
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Any other usage is not supported by
This appliance complies with all
relevant legal safety requirements.
Improper use of the appliance can,
however, present a risk of both
personal injury and material
damage.
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation of the
appliance.
This appliance is not intended for
~
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless they
have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on the installation,
safety, operation and care of the
appliance.
Safety with children
Keep these instructions in a safe
place and pass them on to any
future user.
This appliance is not a toy! To avoid
~
the risk of injury, do not allow children
to play on or near it or to play with the
controls. Older children may only use
the appliance if its operation has been
clearly explained to them and they are
able to use it safely, recognising the
dangers of misuse.
Correct application
This appliance is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
Keep children away from the
~
appliance at all times and supervise
them whilst you are using it. Do not
allow children to play with the
– Shops
– Offices and showrooms
– Hostels and guest houses.
appliance, for example to climb inside
the drawers or to swing on the door.
It must only be used as a domestic
appliance to cool and store foodstuffs
as well as to store deep frozen food,
freeze fresh food and to prepare ice.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
Before setting up the appliance,
~
check it for any externally visible
damage.
Before connecting the appliance to
~
Do not install and use a damaged
appliance.
the mains supply, make sure that the
voltage and frequency correspond to
the rating on the data plate.
This appliance contains the coolant
~
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
Isobutane (R600a), a natural gas which
is environmentally friendly. Although it
is flammable, it does not damage the
ozone layer and does not increase the
greenhouse effect. The use of this
environmentally friendly coolant has,
however, led to a slight increase in the
The electrical safety of this
~
appliance can only be guaranteed
when continuity is complete between it
noise level of the appliance. In addition and an effective earthing system which
to the noise of the compressor, you
might be able to hear the coolant
flowing around the system. This is
unavoidable, but does not have any
adverse effect on the performance of
the appliance.
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
Care must be taken during the
transportation and setting up of the
appliance that no parts of the cooling
system are damaged. Leaking coolant
can damage the eyes.
earthing system (e.g. electric shock).
In the event of any damage:
- avoid open fires and anything which
creates a spark,
If the connection cable is faulty it
~
must only be replaced by a Miele
approved service technician to protect
the user from danger.
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department for
advice.
The more coolant there is in an
~
appliance, the larger the room it should
be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every 8 g of coolant at least 1 m3 of
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Safe operation of the appliance is
Do not connect the appliance to the
~
~
only assured if it has been installed and mains electricity supply by an extension
connected in accordance with these
operating and installation instructions.
lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
This equipment may only be used in
~
mobile installations such as ships,
caravans, aircraft etc. if a risk
In countries where there are areas
~
assessment of the installation has been which may be subject to infestation by
carried out by a suitably qualified
engineer.
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
Installation work, maintenance and
~
repairs may only be carried out by
suitably qualified and competent
persons in accordance with national
and local safety regulations.
damage which may be caused by
cockroaches or other vermin will not be
covered by the appliance guarantee.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
Ensure current is not supplied to the
appliance until after maintenance or
repair work has been carried out.
Correct use
Never handle frozen food with wet
~
hands. Your hands may freeze to the
frozen food.
Do not take ice cubes out with your
~
The appliance is only completely
~
bare hands and never place ice cubes
or ice lollies in your mouth straight from
the freezer.
isolated from the electricity supply
when:
The very low temperature of the frozen
ice or lollies can cause frost burn to the
lips and tongue.
– it has been switched off at the wall
socket and the plug has been
withdrawn.
Do not re-freeze thawed or partially
~
– the fuse from the fused spur
thawed food.
connection unit has been withdrawn,
or
Defrosted food should be used up as
quickly as possible as food soon loses
its nutritional value and goes off.
Defrosted food may only be re-frozen
after it has been cooked.
– the mains fuse has been withdrawn,
or the screw-out fuse removed (in
countries where this is applicable).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not store explosive materials in
Do not use sharp edged objects to
~
– remove frost and ice,
~
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
– separate frozen foods and remove
ice trays.
They will damage the evaporator,
causing irreversible damage to the
appliance.
Do not operate any electrical
~
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
Never place electric heaters or
~
candles in the appliance to defrost it.
These can damage the plastic parts.
If storing alcohol with a high
~
Do not use defrosting sprays or
~
percentage proof, make sure it is tightly
closed and stored upright. Danger of
explosion.
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
Do not store cans or bottles
~
containing carbonated drinks or liquids health.
which could freeze in the freezer
Do not use mechanical devices or
~
section. The cans or bottles could
explode. Danger of injury and damage
to the appliance.
other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
When cooling drinks quickly in the
~
Do not use any oils or grease on the
~
freezer make sure bottles are not left in
for more than one hour, otherwise they
could burst, causing injury or damage.
door seals, as these will cause the
seals to deteriorate and become
porous with time.
Observe the "use by" dates given on
~
Do not store cooking oil in the
~
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on the food
manufacturer’s packaging on storage
conditions required.
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Do not block the ventilation gap in
~
the plinth or the top of the appliance
housing unit as this would impair the
efficiency of the appliance, increase the
electricity consumption and could
cause damage to the appliance.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The appliance is designed for use
Disposal of your old appliance
~
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Before disposing of an old
~
appliance, first make the door latch or
lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Be careful not to damage any part of
~
the pipework whilst awaiting disposal,
e.g. by
Never use a steam-cleaning
– puncturing the refrigerant channels
in the evaporator.
~
appliance to defrost or clean this
appliance. Pressurised steam could
reach the electrical components and
cause a short circuit.
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How to save energy
Normal energy
consumption
Increased energy
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not situated near to a heat source Situated near to a heat source
(radiator, oven).
(radiator, oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient
room temperature.
Temperature setting with
a thermostat which is
approximate
With a medium setting of 2 to 3.
With a high setting: the lower the
temperature in the compartment,
the higher the energy
(set in stages).
consumption.
Temperature setting with
a thermostat which is
exact to the degree
(digital display).
Cellar section 8 to 12°C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer
than 16 °C.
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18°C
Wine storage section 10 to 12 °C
Only open the doors when
Use
Frequent opening of the doors for
necessary and for as short a time long periods will cause a loss of
as possible.
coldness.
Store food in an organised way.
If food is not stored in an
organised way, searching for an
item will mean the door is open for
longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Placing hot food in the appliance
will cause the compressor to run
for a long time, as the appliance
will have to work harder to lower
the temperature.
Store food covered or packaged. The evaporation or condensation
of liquids will cause a loss of
coldness in the refrigerator.
Place frozen food in the
refrigerator to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting
Defrost the freezer compartment
when a layer of ice 0.5 cm thick
has built up.
A layer of ice hinders the cold
from reaching the frozen food, and
causes an increase in energy
consumption.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Before using for the first time
Switching on
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
scratching during transportation.
The refrigerator section/PerfectFresh
zone and freezer section are switched
on together by pressing the master
switch on the right hand side of the
control panel.
^ Do not remove this foil until the
appliance has been built in.
^ Treat the stainless steel surfaces with
a proprietary stainless steel
conditioner immediately after
^ Press the master switch on the right
hand side of the control panel.
removing the foil (available from the
Miele Spare Parts department or via
the internet on www.miele.co.uk).
The temperature display for the
refrigerator section lights up, and the
interior lighting comes on when the door
is opened.
Important! A stainless steel
conditioner gives long lasting
protection, and helps to prevent
resoiling.
Bars light up in the temperature display
for the freezer section.
The appliance starts cooling.
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing-up liquid, and then
dry with a soft cloth.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
Important:
Cool pack
To ensure the correct functioning of
the appliance, let it stand for
between 1½ and 2 hours after
transporting it to its final location
before connecting it to the mains.
Place the cool pack in the top freezer
drawer or, to save space, on the freezer
tray. The cool pack will be at its most
effective after it has been in the freezer
for approx. 24 hours.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Switching off
Safety lock
^ Press the master switch on the right
hand side of the control panel until
both temperature displays go out.
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
The cooling system is switched off. If
this does not happen, then the safety
lock has been activated.
Activating or de-activating the safety
lock
To switch the refrigerator
section/PerfectFresh zone off
separately
^ Press and hold the Super freeze
button for approx. 5 seconds.
The refrigerator section/PerfectFresh
zone can be switched off without
having to switch off the freezer section.
This is useful e.g. whilst on holiday.
The Super freeze indicator light flashes,
and ; flashes in the temperature
display.
^ Then press the Super freeze button
again.
; will light up in the display.
^ Press the On/Off button for the
refrigerator section/PerfectFresh zone
on the left hand side of the control
panel until the temperature display
for the refrigerator section goes out.
^ You can now choose between ; 0
and ; 1 by pressing the temperature
selector buttons:
To switch the refrigerator
section/PerfectFresh zone back on
again
0: the safety lock is de-activated,
1: the safety lock is activated.
^ Press the On/Off button on the left
hand side of the control panel again.
^ Press the Super freeze button to save
the setting.
The refrigerator section temperature
display lights up. The refrigerator
section/PerfectFresh zone starts
cooling. The interior light will come on
when the door is opened.
The safety lock indicator light X will
light up when the safety lock has been
activated.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
^ Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
If you do not do this, the electronics will
switch over to normal operation
automatically after a couple of minutes.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^ defrost the freezer, clean the
appliance and
^ leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut, there is a danger of mould and
odours building up inside the
appliance.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
Dynamic cooling
The dynamic cooling fan automatically
switches on when the cooling system
for the refrigerator switches on. It
distributes the temperature in the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
The temperature in the appliance will
rise:
. . . in the freezer section
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18 °C is required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
– the more often the door is opened
and the longer it is kept open,
– the more food that is stored in the
appliance,
temperature rises above -10 °C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked, as the high temperatures
achieved when cooking destroy most
micro-organisms.
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
. . . in the refrigerator and the
PerfectFresh zone
We recommend a temperature of 4 °C
in the refrigerator.
The temperature in the PerfectFresh
zone is controlled automatically, and is
maintained at 0 to 3 °C.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
Setting the temperature in the
refrigerator section / freezer
section
display, as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Use the two buttons underneath the
respective temperature displays to set
the temperature for the refrigerator and
freezer sections.
Temperature range
The temperature can be adjusted:
Press the
– In the refrigerator section from 4 °C
to 9 °C
– In the freezer section from -16 °C to
-26 °C.
+ button:
– button:
to raise the temperature
(it gets warmer)
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
to reduce the temperature
(it gets cooler).
The temperature being set will flash in
the display.
When pressing the buttons, the
following information shows in the
display:
Setting the temperature in the
PerfectFresh zone
– When first pressed, the last
The temperature in the PerfectFresh
zone is automatically held at 0 to 3 °C.
It can be raised or lowered, e.g. if you
want to use it for storing items like fish.
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current, average
temperature of the refrigerator or
freezer section is automatically shown.
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light will
start flashing, and a ; will flash in the
temperature display.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
18
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
Temperature display
During normal operation, the
temperature displays on the control
panel show the temperature in the
middle of the refrigerator section and
the temperature in the warmest part of
the freezer section.
^ Press one of the temperature selector
buttons repeatedly until a = appears
in the display. Then press the Super
freeze button again.
If the temperatures in the appliance are
not within the range that the appliance
is able to display, bars will flash in the
temperature displays.
= lights up in the display.
^ You can now adjust the temperature
in the PerfectFresh zone by pressing
the temperature selector buttons. You
can choose from settings 1 to 9:
1: lowest temperature,
The temperature displays flash if
– a different temperature is being set,
9: highest temperature.
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
= 5 is the default setting for the
PerfectFresh zone. If a setting of = 1
to = 4 is selected, the temperature
can fall below 0°C. Food could
freeze!
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
^ Press the Super freeze button to save
the setting.
– when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. If it has
started thawing, check that the food is
safe to use and if it is, use it as quickly
as possible.
^ Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise the electronics will revert
to normal operation after a couple of
minutes.
The new temperature setting for the
PerfectFresh zone takes effect
gradually.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
^ Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise the electronics will revert
to normal operation after a couple of
minutes.
The level of brightness can be
adjusted:
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a ; flashes in the temperature
display.
^ Press one of the temperature selector
buttons repeatedly until ^ appears in
the display.
^ Then press the Super freeze button
again.
^ lights up in the display.
^ You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: dimmest setting,
5: brightest setting.
^ Press the Super freeze button to save
the setting.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer section
cannot rise unnoticed.
Activating the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
An alarm will sound and at the same
time the temperature display for the
freezer section will flash if the
temperature becomes too warm. The
temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
Switching the alarm off early
Once the set temperature has been
reached in the freezer, the alarm
switches off and the temperature
display stops flashing and lights up
constantly. However, if the noise
disturbs you, you can switch the alarm
off before this if you wish.
The alarm will sound and the alarm
indicator light will flash,
– if the freezer door has been left open
for a while, e.g. in order to load, to
re-arrange or to take food out.
^ Press the alarm off button.
– when freezing large amounts of food
at once.
The alarm will stop. The temperature
display will continue to flash until the
set temperature has been reached.
The display then stops flashing and
lights up constantly. The alarm
system is now fully active once more.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Super freeze
Super cool
Super freeze
The Super cool function can be used to Switch the Super freeze function on
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
before putting fresh food into the
freezer.
This helps food to freeze quickly and
retain its nutrients, vitamins, flavours
and appearance.
Switching on Super cool
Super cool is particularly
recommended for the faster chilling of
large amounts of fresh food or drink.
Super freeze is not necessary:
– when putting in food that is already
frozen.
– when freezing up to 2 kg fresh food
daily.
^ Press the Super cool button; the
Super cool indicator light will come
on.
Switching on Super freeze
When freezing small quantities of food
in the freezer, the Super freeze function
should be switched on 6 hours
beforehand. When freezing the
maximum load of food the Super
freeze function should be switched on
24 hours beforehand.
The appliance works at full power to
lower the temperature in the
refrigerator section.
Switching off Super cool
The Super cool function will switch itself
off automatically after approx. 6 hours.
The indicator light will go out and the
appliance will run at normal power
again.
^ Press the Super freeze button. The
Super freeze indicator light will come
on.
To save energy, the Super cool function
can be switched off once food and
drinks are sufficiently chilled.
The appliance works at full power to
lower the temperature in the freezer
section.
^ Press the Super cool button. The
Super cool indicator light will go out,
and the appliance will continue to
operate at normal power.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Super cool and Super freeze
Switching off Super freeze
Depending on the amount of food
placed in the freezer section, the Super
freeze function will switch off
automatically after approx. 30 to 60
hours. The Super freeze indicator light
will go out and the appliance will
continue running at normal power.
To save energy, the Super freeze
function can be switched off once a
constant temperature of -18 °C or
colder has been reached in the freezer
section.
^ Press the Super freeze button. The
Super freeze indicator light will go
out, and the appliance will continue
to operate at normal power.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Different storage zones
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a temperature of
approx. 4 °C.
Due to the natural circulation of the air
in the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
the different zones when placing food
in the appliance.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
This appliance has automatic
dynamic cooling, which helps to
keep an even temperature when the
fan is running. For this reason, the
difference between the various
zones is less pronounced.
If storing alcohol with a high
percentage proof, make sure it is
tightly closed, and store upright.
Do not store cooking oil in the
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Warmest area
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Food must not touch the back wall of
the refrigerator, as it may freeze to
the back wall.
Coldest area
The coldest area in the refrigerator is
directly above the PerfectFresh zone.
However, the PerfectFresh zone is even
colder.
To allow air to circulate efficiently,
do not pack food too closely
together in the refrigerator. Do not
cover the fan in the rear wall of the
refrigerator, as this is essential for
keeping the appliance cool.
Use these areas in the refrigerator and
in the PerfectFresh zone for all delicate
and highly perishable food, e.g.
– fish, meat, poultry,
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream,
– fresh dough, cake mixtures, pizza or
quiche dough,
– soft cheese and other dairy
products,
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Food which should not be
stored in a refrigerator
Storing food correctly
Food should generally be stored
covered or packaged in the refrigerator
Not all food is suitable for refrigeration.
This includes:
(there are some exceptions to this rule
in the PerfectFresh zone - see below).
This will prevent food smells from
– Fruit and vegetables which are
sensitive to cold, such as bananas,
avocado, papaya, passion fruit,
aubergines, peppers, tomatoes and
cucumbers
affecting other foods, food from drying
out, and also any cross-contamination
of bacteria. The growth of bacteria,
such as salmonella, can be avoided by
setting the correct temperature and
maintaining good standards of hygiene.
– Fruit which is not yet ripe
– Potatoes
Unpacked meat and vegetables
– Some hard cheeses, e.g. Parmesan
Unpackaged meat and vegetables
should be stored separately. To avoid
any microbiological cross-
When shopping for food
The freshness of food when first placed
in the appliance is an important factor
in determining how long it stays fresh,
and how long it can be kept in the
refrigerator. Time out of the refrigerator,
e.g. during transportation, should be
kept to a minimum. For example, do not
allow food to stay in a hot car for too
long. Once food has started to
contamination, these foods may only be
stored together if they are wrapped.
deteriorate, this process cannot be
reversed. As little as two hours outside
the refrigerator can cause food to start
deteriorating.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the PerfectFresh zone
For every type of food, there are ideal
storage conditions to ensure it stays
fresh as long as possible, retaining
both flavour and vitamins.
What are the advantages of the
PerfectFresh zone?
As food remains fresh for up to three
times as long, the advantages for you
are:
The important factors for this are the
storage temperature and the humidity.
– fresher, tastier food,
The correct combination of temperature
and humidity is a unique feature of the
PerfectFresh zone. Food can be stored
for up to three times longer in the
PerfectFresh zone than in a standard
refrigerator.
– greater convenience due to practical
storage, and
– greater savings due to quality
preservation.
Storing food in the dry and
humidity-controlled
compartments
Storage temperature
The optimum storage temperature for
fresh food which is not sensitive to the
cold is 0 - 3 °C. This is the temperature
range which is automatically
The PerfectFresh zone is divided into
two areas, the dry compartment and
the humidity-controlled compartment.
maintained in the PerfectFresh zone.
Food can be stored there at this
temperature without loss of freshness
for considerably longer than in a
standard refrigerator, as the
The dry compartment
The dry compartment has a relatively
low humidity level that is approx. the
same as that in the refrigerator.
deterioration process is decelerated
at this temperature.
So the main advantage of the dry
compartment is the low temperature of
0 °C, rather than the humidity.
Humidity level
The closer the storage humidity is to the
humidity content of the food, the crisper
and fresher the food remains over a
longer period, as the water content of
the food is largely retained.
The dry compartment is ideal for storing
particularly sensitive foods, such as
– fresh fish, shellfish, meat, poultry,
sausages, dairy products and
salads.
Please note that foods rich in protein
deteriorate faster than others.
Shellfish, for example, deteriorates
faster than fish, and fish deteriorates
faster than meat.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the PerfectFresh zone
Always keep these foods covered or
wrapped.
Take food out of the PerfectFresh
zone approx. 30 - 60 minutes before
using it. The aroma and taste do not
fully develop until the food has
reached room temperature.
Exception: Meat. The surface of the
meat dries out slightly, helping to
prevent the growth of bacteria, which
results in the meat lasting longer. To
prevent the risk of bacterial
cross-contamination and meat
deteriorating, do not let one type of
meat come into direct contact with
another type.
Can all types of food be stored
together?
Do not place all types of food together
in one drawer. Some types of food do
not store well together. Aromas and
flavours can transfer from one type of
food to another (e.g. carrots absorb the
smell and flavour of onions very easily).
Some food also gives off a natural gas
(ethylene) which speeds up the rate at
which other food perishes.
Humidity-controlled compartment
The humidity-controlled compartment
has a regulator which is used to adjust
the relative humidity. Slide the regulator
to the relative humidity level required
(- = high humidity, , = low humidity).
If high humidity - is selected, a
humidity level of 90 % can be achieved
when the compartment is full. The
humidity depends strongly on the type
and quanltiy of food being stored.
Examples of fruit and vegetables
which produce a large amount of this
natural gas are:
Apples, apricots, pears, nectarines,
peaches, plums, avocado, figs,
blueberries, melons and beans.
Please take into account that high
humidity is only achieved and is only
effective on the food if the food is
stored unwrapped or loosely
wrapped.
Examples of fruit and vegetables
which react strongly to the natural
gases given off by other types of fruit
and vegetables are:
– The humidty-controlled compartment
at the high humidity setting - is
ideal for storing freshly harvested
products such as vegetables, salad,
herbs, mushrooms and home-grown
seasonal fruit.
Kiwis, broccoli, cauliflower, Brussels
sprouts, mangos, honeydew melons,
apples, apricots, cucumbers, tomatoes,
pears, nectarines and peaches.
Example: Broccoli should not be stored
with apples, as apples produce a large
amount of natural gas to which broccoli
is very sensitive. The result is a shorter
than expected storage time for the
broccoli.
– At the low humidity setting ,, the
atmosphere inside the
humidity-controlled compartment is
the same as in the dry compartment.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Moving the shelves
To move the split shelf:
The shelves can be adjusted according ^ Take both halves of the split glass
to the height of the food.
shelf out,
^ Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
^ fit the two brackets onto the supports
on either side at the required height,
Stoppers prevent the shelves from
being dislodged by mistake.
^ and push the glass shelves in one
after the other. The shelf with the
raised edge must be at the back.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic rails, and can
be removed for filling, emptying or
cleaning purposes.
^ Push the rear half of the glass shelf
up slightly from below.
^ At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
^ Pull out the compartment as far as it
will go, and then lift it up and out.
Push the runners back in again to
avoid injury or damage.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
^ Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
Universal container
The universal container can be used
both to store and serve food.
^ To replace it, insert the compartment
lid from beneath into the holders, and
push it back into place.
It consists of a deep tray and a shallow
tray. Both trays fit the stainless steel
frame.
To replace the compartment,
If you wish to use the universal
container to serve food,
^ place the shallow tray in the stainless
steel frame, and use the deep tray as
a lid.
You can lift the universal container,
including contents, out of the frame and
take it to the table.
^ place it back on the fully extended
runners a. The front of the runners
must be right up against the front of
the compartment b.
Moving the bottle divider
(depending on model)
^ Then push the compartment back in
c.
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
Adjusting the condiment
tray/bottle shelf
The bottle divider can be removed
completely (e.g. for cleaning).
^ Lift the tray/shelf up and out of the
stainless steel frame to remove.
^ To do this, push up the front edge of
the bottle divider, and disengage it.
^ Push up the stainless steel frame,
and remove.
^ Replace the frame at the required
height. Ensure that it is securely
pushed back into position.
^ Replace the tray/shelf in the frame.
The tray/shelf can be removed
completely and used as a serving tray
at the table.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Maximum freezing capacity
Storing frozen food
To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be
When buying frozen food to store in
your freezer, check
– that the packaging is not damaged,
– the use-by date,
exceeded. The maximum freezing
capacity for freezing within a 24-hour
period is given on the data plate:
"Freezing capacity ....kg/24 hrs".
– the temperature at which the frozen
food is being stored in the shop. The
length of time it can be kept is
reduced if it has been stored at a
temperature warmer than -18 °C.
Freezing fresh food
Fresh food should be frozen as quickly
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.
^ Buy frozen food once you have
finished the rest of your shopping,
and wrap it in newspaper or use a
cool bag or cool box to transport it.
^ Store it in the freezer as soon as
possible.
Food which takes a long time to freeze
will lose more water from its cells, which
then shrink.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
During the defrosting process, only
some of this water is reabsorbed by the
cells; the rest collects around the food.
If food is frozen quickly, the cells have
less time to lose moisture, so they
shrink less. As there is not so much
moisture loss, it is easier for the food to
reabsorb it during the defrosting
process, and very little water collects
around the defrosted food.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Home freezing
lightly before freezing, but care
should be taken as the taste of some
spices alters when frozen.
Only freeze fresh food which is in a
good condition.
– Do not place hot foods or drinks in
the freezer. This causes already
frozen food to thaw, and increases
the energy consumption
Hints on home freezing
– The following types of food are
suitable for freezing:
considerably. Allow hot foods and
drinks to cool down before placing
them in the freezer.
Fresh meat, poultry, game, fish,
vegetables, herbs, fresh fruit, dairy
products, pastry, leftovers, egg
yolks, egg whites and a range of
pre-cooked meals.
Packing
^ Freeze food in portions.
– The following types of food are not
suitable for freezing:
Unsuitable packing material
- wrapping paper
- grease-proof paper
- cellophane
Grapes, lettuce, radishes, sour
cream, mayonnaise, eggs in their
shells, onions, whole raw apples and
pears.
- bin bags
– To retain colour, taste and vitamin C,
vegetables should be blanched after
they have been trimmed and
washed.
- plastic carrier bags
Suitable packing material
- plastic freezer film
- freezer bags
To blanch: bring a large saucepan of
water to the boil, immerse the
vegetables in the fast boiling water
for 2-3 minutes, depending on
variety. Remove, and plunge into
ice-cold water to cool quickly. Drain
and pack ready for freezing.
- aluminium foil
- freezer containers
^ Expel as much air as possible from
bags etc. before sealing them, to
prevent freezer-burn on food.
^ Close the packaging tightly with
- rubber bands
– Lean meat freezes better than fatty
meat, and can be stored for
considerably longer.
- plastic clips
- string or bag ties
- freezer tape.
– To prevent chops, steaks, cutlets or
rolled meat from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer film.
Freezer bags may also be sealed
using home heat sealing kits.
– Do not season fresh foods or
blanched vegetables before
^ Make a note of the contents and the
date of freezing on the packaging.
freezing. Only season cooked food
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Before placing food in the freezer
section
Freezing large items
If you wish to freeze large items such
as a turkey or game, the glass cold
plate between the drawers can be
removed. To do this:
^ When freezing more than 2 kg of
fresh food, switch on the Super
freeze function for some time before
placing the food in the freezer (see
"Super freeze").
^ Remove the freezer drawers and
carefully lift and slide out the glass
cold plate.
This also helps to prevent food that is
already in the freezer from starting to
defrost.
Freezer calendar
Placing food in the freezer
The freezer calendar on the freezer
drawer gives the length of time in
months which various foods can be
stored for effectively.
Food to be frozen can be placed
anywhere in the freezer.
Large quantities can be placed directly
on the glass cold plate to freeze the
food quickly. To do this first take out
one or more of the freezer drawers.
Where the storage time given on the
packaging differs, follow the advice on
the packaging.
Each drawer and the glass cold
plate can take a maximum of 25 kg.
^ Place the food flat in the bottom of
the drawers or on the glass cold
plate in the freezer so that it freezes
through to the core as quickly as
possible.
2-3 months:
Cakes, ice cream, stews
3-5 months:
^ Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
Fish, mushrooms, bread
6-8 months:
Pork, veal, poultry
When freezing, make sure that food
already frozen does not come into
contact with fresh food being frozen
as this could cause the frozen food
to begin to defrost.
10-12 months:
Beef, fruit, vegetables
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Defrosting
Ice cubes
Frozen food can be defrosted in
different ways:
– in a microwave oven,
– in an oven using the "Fan" or
"Defrost" setting,
^ Fill the ice tray three quarters full with
water and place it on the bottom of
one of the freezer drawers.
– at room temperature,
– in the refrigerator (the cold given off
by the frozen food helps to keep the
other food cold),
^ Once frozen, use a blunt instrument,
for example a spoon handle, to
– in a steam oven.
remove the ice tray from the freezer.
Poultry It is particularly important to
observe food hygiene rules when
defrosting poultry. Do not use the liquid
from defrosted poultry. Pour it away
and wash the container it was in, the
sink and your hands. Danger of
salmonella poisoning.
^ Ice cubes can be removed easily
from the tray by twisting the tray
gently or by holding it under cold
running water for a short while.
Cooling drinks
Drinks are best cooled quickly in the
refrigerator section using the Super
cool function. If bottles are, however,
placed in the freezer section for rapid
cooling, make sure they are not left in
for more than one hour, as they could
burst.
Fruit should be defrosted at room
temperature in its packaging, or in a
covered bowl.
Most vegetables can be cooked while
still frozen. Just put straight into boiling
water or hot fat. The cooking time is
slightly less than that of fresh
vegetables due to changes in the cell
structure.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Freezer tray
Cool pack
The freezer tray is useful for freezing
small items such as berries, herbs and
vegetables. They can be frozen
individually and therefore maintain their
shape when defrosted.
The cool pack prevents the
temperature in the freezer rising too
quickly in the event of a power cut.
Place the cool pack in the top drawer of
the freezer section, directly on top of
the food. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.
^ Space the food out loosely on the
tray.
If there is a power cut, place the cool
pack directly on top of the frozen food
in the upper drawer so that the food will
be kept cold for as long as possible.
When placing fresh food in the freezer,
use the cool pack to separate the fresh
food from the food which is already
frozen so that the frozen food does not
begin to thaw.
^ Hang the tray in the top freezer
drawer.
Leave the food for 10-12 hours to
freeze thoroughly on the tray. Transfer it
to a freezer bag or suitable container
once frozen. Place the bag or container
in the freezer drawer.
The cool pack can also be used in a
cool bag to keep food or drinks cool for
a short period of time.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting the appliance
Refrigerator and PerfectFresh
zone
only very little food or no food at all is
left in the freezer.
The refrigerator and the PerfectFresh
zone defrost automatically.
Before defrosting
^ Switch on the Super freeze function
approx.1 day before defrosting to
ensure frozen food retains its cold
reserve for longer when taken out of
the freezer.
Condensate and frost can build up on
the back wall of the refrigerator section
and the PerfectFresh zone whilst in use.
You do not need to remove this, as it
will defrost and evaporate automatically
with the warmth generated by the
refrigerator.
^ Remove the frozen food from the
freezer and place it in another
freezer, or wrap it in several layers of
newspaper or cloths with the cool
pack, and store in a cool place until
the freezer is ready for use again.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
^ Take the freezer drawers out of the
freezer section.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
To defrost
condensate can flow away without
hindrance.
Carry out the defrosting procedure
as quickly as possible if food has
not been placed in another freezer.
The longer the food is left out at
room temperature, the faster it
defrosts.
Freezer section
The freezer section does not defrost
automatically.
In normal use, ice and frost will form on
the evaporator. If allowed to
^ Switch the appliance off by pressing
the master On/Off switch, switch off
at the socket and remove the plug.
accumulate, this will impair the
efficiency of the freezer and increase
the consumption of electricity.
The temperature displays will go out.
If this does not happen, then the
safety lock is engaged.
Do not scrape ice and frost off the
evaporator as this can damage it
and render the appliance unusable.
^ Open the freezer section door.
^ Use a sponge or towel to soak up the
defrosted water.
The freezer section should be defrosted
from time to time. It must be defrosted if
a layer of ice approx. 0.5 cm thick has
accumulated. It is best to defrost when
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting the appliance
To speed up defrosting, two bowls of
hot water (not boiling) with plates
underneath them can be placed in the
appliance. Closing the door in this
instance will help retain warmth and
speed up the defrosting process.
After defrosting
^ Clean the freezer section and then
dry it thoroughly.
^ Close the appliance doors.
^ Plug the appliance back in, and then
switch it on.
We do not recommend the use of
hot air blowers such as hairdryers
for defrosting your freezer.
The temperature displays will light
up.
^ Switch on the Super freeze function
so that the appliance can cool down
quickly. The indicator light will come
on.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic
parts.
^ Once the freezer section has
reached the required temperature,
place the food back in the freezer
drawers and slide the drawers back
into the freezer section.
Do not use defrosting sprays or
de-icers, as they could contain
substances which may damage the
plastic parts and which may cause a
build-up of gases and pose a
danger to health.
^ Switch off Super freeze by pressing
the Super freeze button when the
temperature in the freezer is a
constant -18 °C or colder.
The indicator light will go out.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Take any food out of the appliance
and store it in a cool place.
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids chlorides
or chemical solvents.
^ Defrost the freezer.
^ Take out any removable parts, e.g.
shelves, for cleaning.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
E-Cloth
A microfibre “E-Cloth” is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
To help prevent re-soiling, treat
stainless steel surfaces with a
proprietary conditioning agent for
stainless steel (available from the
Miele Spare Parts Department or via
chemicals. It can be washed 300 times.
Cleaning the interior and
accessories
Do not let water get into the
electronic unit or into the light.
Use warm water with a little washing-up
liquid. Wash all accessories and
drawers by hand only. Do not wash in a
dishwasher.
Do not let water get into the
drainage channel and drain hole
when cleaning.
^ Clean the refrigerator section at least
once a month and the freezer section
each time it is defrosted.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the doors
open to air the appliance for a short
while.
Before cleaning
^ Switch the appliance off by pressing
the master On/Off switch on the right
hand side of the control panel, switch
off at the socket and remove the
plug.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Clean stainless steel surfaces with a
suitable, non-abrasive, proprietary
stainless steel cleaning agent,
following the manufacturer’s
After cleaning
^ Replace all shelves and accessories
in the refrigerator section.
instructions on the packaging.
^ Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the socket and
switch the refrigerator section and
the freezer section on.
^ After cleaning, stainless steel
surfaces should always be treated
with a conditioning agent for stainless
steel.
^ Switch on the Super freeze function
so that the freezer section can cool
down quickly. The indicator light will
come on.
It is important to do this every time
the stainless steel surfaces are
cleaned, as the stainless steel
conditioner protects the surfaces
and helps prevent re-soiling.
^ Once the freezer section has
reached the required temperature,
place the food back in the freezer
drawers and slide the drawers back
into the freezer section.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
^ Switch off Super freeze by pressing
the Super freeze button when the
temperature in the freezer is a
constant -18 °C or colder.
The indicator light will go out.
Door seals
Do not use any oils or grease on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the temperature in the refrigerator
section or freezer section is too low.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
^ Select a warmer temperature.
^ The Super freeze function is still on
and the Super freeze indicator light is
on.
The Super freeze function switches
itself off automatically after 30-60
hours.
unauthorised work.
^ The Super cool function is still on and
the Super cool indicator light is on.
The Super cool function switches
itself off automatically after approx. 6
hours.
Ensure that current is not supplied to
the appliance until after
maintenance or repair work has
been carried out.
^ Check that the doors have been
closed properly.
What to do if . . .
. . . the refrigerator section or freezer
section does not get cold.
^ Has a large amount of fresh food
been frozen at the same time?
This makes the compressor run for
longer, causing the temperature in
the refrigerator section to fall
automatically.
^ Check whether the respective section
is switched on. The relevant
temperature display must be lit up.
^ Check that the plug is correctly
inserted in the socket and switched
on.
. . . the door to the freezer section
will not open because it has been
opened and closed too many times in
succession.
^ Check that the fuse is not defective
and that the mains fuse has not
tripped. If it has, contact the Miele
Service Department.
^ This is not a fault. The suction caused
by opening and closing the door is
preventing the door from opening.
Wait a few minutes and then try
again. It should now open without
force.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the compressor is switching in
too frequently and for too long.
. . . food has frozen together.
Use a blunt instrument, e.g. a spoon
^ Check whether the ventilation gaps in handle or plastic scraper, to prise it
the plinth and in the housing unit at
the top have been covered over or
become too dusty.
apart carefully.
. . . there is a thick layer of ice in the
freezer section.
^ The doors have been opened too
frequently, or a large amount of fresh ^ Check whether the freezer section
food has been put in at once for
door closes properly.
freezing.
^ Defrost and then clean the freezer
section.
^ Check that the doors have been
closed properly.
Too thick a layer of ice reduces
^ Check to see whether a thick layer of efficiency and increases energy
ice has built up in the freezer. If it
has, then the freezer section will
need defrosting.
consumption.
^ Close the door.
. . . the alarm sounds and the freezer
section temperature display flashes.
. . . the compressor runs
continuously.
The freezer section temperature has
risen above the set temperature
because
To save energy, the compressor runs at
a lower speed, but for longer, when
less cooling is required.
^ the freezer section door has been
opened too frequently, or large
amounts of fresh food have been put
in at once for freezing.
. . . the frozen food is thawing
because the freezer section is too
warm.
The alarm will stop and the temperature
display will light up constantly again as
soon as the temperature has dropped
down to the correct level again.
^ Is the room temperature lower than
the ambient temperature for which
the appliance is designed?
If so, raise the temperature of the
room.
Operating in a room which is too cold
will cause the cooling system to switch
off for too long causing the freezer
section to become too warm.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . bars light up or flash in the
temperature displays.
. . . "nA" appears in the freezer
section temperature display.
Check the temperature displays about
6 hours after switching on the
The freezer section temperature has
risen too high at some point during the
appliance. Only temperatures within the last couple of days because of a power
range the appliance can display will be cut.
shown.
^ Press the alarm off button whilst "nA"
is lit up in the display.
. . . "F0" to "F5" in one of the
temperature displays appears.
The temperature display will show the
warmest temperature recorded in the
freezer section during the power cut.
There is a fault. Call the Service
Department.
Depending on the temperature
displayed, you should check the
condition of food in the freezer. If it has
defrosted or started to defrost, check
that it is still safe to use and if so use it
as soon as possible. Defrosted food
may only be re-frozen after it has been
cooked.
. . . the Super freeze indicator light
and the temperature display are both
flashing at the same time.
There is a fault. Call the Service
Department.
. . . the Super freeze indicator light
does not light up, even though the
appliance is working.
The warmest temperature will show in
the display for about 1 minute. The
display will then revert to showing the
actual current temperature in the
freezer section.
The indicator light is defective. Call the
Service Department.
. . . you cannot switch the appliance
off.
At the end of a power cut, the
appliance will start operating again at
the last temperature setting selected.
The safety lock has been activated.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the interior lighting in the
refrigerator section is not working.
Has the refrigerator door been left open
for too long? The lighting switches itself
off automatically after approx. 15
minutes.
If it also does not come on when the
door is opened briefly, but the
temperature display is working, then
the lighting is defective.
^ Call the Service Department.
The LED lighting may only be repaired
or changed by a service technician.
Danger of injury and damage.
Should the cover be damaged or
need to be removed due to damage,
exercise caution. Never look at the
lighting with optical instruments
(magnifying glass or similar).
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature, it is advisable not to
open the doors while waiting for the
appliance to be serviced.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
Creak ...
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Creaking sounds can be heard when material inside the
appliance expands.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele
(see back cover for contact details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
delivery. However, you must activate
your cover by calling 0845 365 6640 or
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person in strict accordance with current is lost, the plug must not be used until a
local and national safety regulations
(BS 7671 in the UK).
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
Please ensure that the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
Connection should be made via a
suitable switched socket which is easily your local electrical supplier.
accessible. For extra safety it is
advisable to protect the appliance with
a suitable residual current device
WARNING
(RCD).
THIS APPLIANCE MUST BE
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
EARTHED
This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism. This could damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Climate range
To avoid a hazard due to instability
of the appliance, it must be installed
in accordance with these
instructions.
The appliance is designed for use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Location
The appliance should be installed in a
dry, well ventilated room. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.
Climate range
Ambient room
temperature
SN
N
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
+10°C to +38°C
+10°C to +43°C
ST
T
SN-ST
SN-T
It should not be installed where it is
exposed to direct sunlight or directly
adjacent to a heat-producing appliance
such as an oven or a radiator.
Operating in a room which is too cold
will cause the cooling system to switch
off for too long, causing the internal
temperature in the appliance to rise
with the risk of food deteriorating and
going off or frozen food defrosting.
Important: tropical / humid
environments
During periods of high humidity,
some condensation may appear on
outside surfaces of cooling
appliances. This condensation will
disappear when humidity levels
drop. For prevention, it is advisable
to install the appliance with sufficient
ventilation in a dry and/or an
air-conditioned room.
Please ensure that doors are closing
and sealing properly.
Please ensure that the appliance is
installed in accordance with these
installation instructions and that the
handle is fitted correctly. Should you
require further assistance please
contact your Miele customer service
centre.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Ventilation
^ Remove any cable clips from the rear
of the appliance.
Air at the back of the appliance gets
warm. The appliance housing unit must
be constructed to allow sufficient space
for ventilation.
A ventilation gap of at least 38 mm
depth must be allowed for behind the
appliance for air to circulate.The air
inlet to the appliance is via the plinth in
the housing unit.
The cross-section of the air inlet and
outlet must be at least 200 cm2 to
ensure that air can circulate without
hindrance. Otherwise the appliance has
to work harder, resulting in an increase
in electricity consumption.
^ Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Before installation
Does your old appliance have
a different hinging
^ Before installation, remove the cover
strip, sealing strip and other
accessories from the appliance and
from the external rear wall of the
appliance.
mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from the Miele Spare
Parts Department.
^ On no account should the spacers
be removed from the back of the
appliance. These ensure the gap
required between the back of the
appliance and the wall is maintained.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in dimensions
Freezer section height
Niche height
B
A
KF 9757 iD
549
1772 - 1788
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the door hinges
The door hinges are set ex-works to
enable the doors to be opened wide.
– If you would like the appliance doors
to be cushioned so that they open
more softly, the spring tension on the
doors can be adjusted.
However, if the opening angle of the
doors needs to be limited for any
reason, the hinges can be adjusted to
accommodate this.
To do this, use the allen key supplied to
adjust the door hinges.
– For example, if the appliance doors
hit an adjacent wall when opened,
the opening angle can be limited to
90°.
^ Place the locking pins supplied for
limiting the door opening into the
hinges from above.
The door opening angle is now limited
to 90°.
aTo reduce the opening angle:
^ Turn the allen key clockwise.
This tightens the hinges and makes it
harder to open the door wide.
bTo open the door fully:
^ Turn the allen key anticlockwise.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
^ Unscrew fixing screws e completely,
and loosely screw them in at the top,
middle and bottom on the opposite
side of the appliance.
If you have put locking pins into the
To change the door hinging you will
hinges to stop the door opening too far:
need the following tools:
– a cross-slotted screwdriver,
– a flat-bladed screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
^ Remove the locking pins from the top
of the hinges.
^ Open both appliance doors.
To remove the soft-close mechanism
^ Place the doors with the outer side
downwards on a stable surface.
^ Using a screwdriver, carefully push
tension spring a outwards.
^ Remove covers a, b and c and
caps d with a screwdriver.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
^ Slightly loosen fixing screws e at the
top, middle and bottom of the
appliance.
^ Unscrew mounting b and pull
soft-close mechanism c downwards
to remove it.
^ Push each of the doors outwards and
take them off their hinges.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Undo ball joint d using a spanner
and remove it.
^ Replace caps a in the vacant holes
on the opposite side.
^ Stand the appliance doors up one by
one, and slacken the hinges at the
front (the hinges remain open).
To secure the soft-close mechanism
^ Place the two doors with the outer
side downwards on a stable surface.
^ Screw ball joint d of soft-close
mechanism c into the new fixing
holes.
^ Push tension spring a inwards
again.
^ Screw mounting b onto the hinge
and tighten securely.
^ Remove caps a from the top and
bottom of each door (if the caps are
not in place, they will have been
supplied separately with the
appliance).
^ Open out soft-close mechanism c
and hook it onto ball joint d.
^ Remove screws b from all of the
hinges, and refit each hinge in its
diagonally opposite corner.
Do not close up the hinges. Danger
of injury.
^ Use a powered screwdriver to secure
the hinges; screws b are
self-tapping.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Hang the doors onto the pre-fitted
screws, and push the doors inwards.
^ Tighten the screws at the top, middle
and bottom securely.
^ Replace covers a, b and c.
^ Then replace caps d in the vacant
holes.
^ Replace the locking pins into the top
of the hinges to prevent the doors
opening too far.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building into a peninsular run
All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
To install the appliance you will need
the following:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner.
Weight of the furniture doors
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
max.
weight
of upper of lower
max.
weight
Appliance
KF 9757 iD
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
door in
kg
door in
kg
20
12
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Preparing the appliance
^ Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
With 16 mm thick unit walls:
^ Slide cover strip a into the holder as
shown, with the bumps facing
downwards. The bumps will fit into
keyhole slots b.
^ Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^ Clip spacers e onto the top hinges
and spacers f onto the bottom
hinges.
^ Secure fixing brackets c (supplied)
to the appliance doors by screwing a
hexagon screw d into the pre-drilled
holes.
(With large furniture doors, attach a
third pair of fixing brackets c in the
handle region of the doors).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Open both appliance doors.
^ Fit cover k onto fixing bracket l.
^ Secure fixing bracket l to the
bottom of the appliance with screws
m (M5 x 15).
^ Carefully remove the protective foil
from sealing strip n.
^ Using a screwdriver, remove cover
g from the top corner of the
appliance.
^ Apply the sealing strip to the side of
the appliance on which the door is
opened so that it is flush with the
front edge of the appliance.
^ Fit cover h onto fixing bracket i.
^ Secure fixing bracket i to the top of
the appliance with screws j
(M5 x 15).
Fit the sealing strip so that it meets
up with the lower edge of top cover
h and then cut the sealing strip
2 - 3 mm above bottom fixing bracket
l.
^ Push the appliance into the niche
until covers h and k touch the front
edge of the side walls of the housing
unit.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building in the appliance
On furniture with door fittings (e.g.
stubs, seals etc) the dimension of
these must be taken into account when
making sure there is a gap all round of
42 mm.
^ Pull the appliance forwards by the
dimension of the door fitting to keep
the gap at 42 mm all round.
The hinges and the covers will now
protrude by the dimension of the door
fitting.
Tip: Remove the door fittings. This will
ensure that the doors are flush with the
surrounding kitchen unit furniture doors.
If the all round gap of 42 mm is not
maintained between the appliance
casing and the front edge of the
housing unit side wall the doors may
not shut properly.
This could lead to a build-up of ice
and condensation and also cause
operational faults.
– With 16 mm thick walls:
The spacers should touch the front
edge at the top and bottom of the
side walls of the housing unit, detail
a.
^ Align the appliance height on both
sides by altering the adjustable feet
using the spanner supplied c.
– With 19 mm thick walls:
The front edges of the top and
bottom hinges sit flush with the front
edge of the housing side walls, detail
b.
^ Make sure that the covers on the top
and bottom fixing brackets sit flush
with the front edges of the housing
unit side walls, detail d.
This will create a gap all round of
42 mm to the front edges of the
housing unit side walls.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Securing the appliance in the
niche
^ Press the appliance against the
housing unit on the hinge side.
^ Loosen screws b on the top and
bottom fixing brackets c.
^ To fix the appliance to the housing
unit at the top and bottom, screw the
long 4 x 20 mm chip board screws a
into the hinges at the top and bottom.
^ Press fixing bracket c against the
side wall and tighten screws b.
^ Attach fixing bracket c to the
housing unit side wall with screws d.
Drill holes in the housing unit side
walls if necessary.
^ Break off the protruding end of top
cover e, turn the cover around and
fit it on top fixing bracket c.
^ Fit oblong cover f onto top fixing
bracket c.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Break off the protruding end of
bottom cover e. It is no longer
required.
^ Fit angled cover g onto bottom fixing
bracket c.
^ Close the appliance doors.
Fitting the furniture doors
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm
chipboard screws b. (On cassette
doors only use 4 screws on the
edges).
^ A gap of 8 mm a must be set
between the appliance door and the
central fixing bracket.
^ Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
^ Pull the fitting aids upwards to
remove them f.
^ Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.
^ Undo nuts c and take fixing bracket
d off together with the fitting aids.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Securing the appliance doors to the
furniture doors:
^ Hang the furniture door onto
adjusting bolts h.
^ Drill fixing holes a in the furniture
doors and screw in the 4 x 14 mm
screws b.
^ Loosely attach nuts c on the
adjusting bolts.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
Make sure the two metal edges are
alligned (Symbol II).
– Align depth Z on the furniture door:
Loosen screws c at the top of the
appliance door, and loosen the
hexagon-headed screw d at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
housing unit.
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts h with a screwdriver.
^ Tighten nuts c.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Replace top cover i, and snap it
into place.
^ Close both of the doors, and align
them with the neighbouring furniture
doors.
^ Replace side covers j, making sure
they snap into place.
^ Replace side covers k, making sure
they snap into place.
^ Whilst counterholding adjusting bolts
g with a screwdriver, tighten nuts a
on the appliance doors with ring
spanner f.
^ Cover strip h must be completely
hidden in the niche, and must not
protrude.
^ Tighten all screws again.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
To make sure the appliance is
correctly fitted:
– The doors must close properly.
– The doors must not touch the
housing unit.
– The seals at the top edge of the
handle side must fit properly.
^ To double check place a torch in the
appliance and close the doors. Turn
the lights out in the room. If you can
see any light shining out from the
sides double check the installation.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 2610
KF 9757 iD
M.-Nr. 07 472 710 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|