Operating and Installation
Instructions
Fridge-Freezer Combination
KF 1801 SF
KF 1811 SF
KF 1901 SF
KF 1911 SF
en - US, CA
To prevent accidents
and appliance damage
read these instructions
before
installation or use.
M.-Nr. 09 169 650
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing the light bulb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Water filter change indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Exchanging the water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Confirming the filter change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using an external water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Lead free certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Stainless steel panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installation options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Adjusting the door opening angle (optional accessory) . . . . . . . . . . . . . . . . . . . . 55
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
RemoteVision module installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Preparing the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Sliding the appliance into the installation niche . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Attaching the appliance to the installation niche. . . . . . . . . . . . . . . . . . . . . . . . . . 69
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
RemoteVision (optional accessory) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using the appliance, follow
basic safety precautions, including
the following:
Electrical Safety
Before installation, make sure that
~
the voltage and frequency listed on the
data plate correspond with the
Read all instructions before
installation and use to prevent
accidents and machine damage.
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Before installation or service,
~
This appliance is intended for
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
residential use only. Use only as
described in this Operating manual.
Only use the appliance for its
intended purpose.
Do not use an extension cord to
~
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(e.g., danger of overheating).
This appliance complies with current
safety requirements. Improper use
of the appliance can lead to
personal injury and material
damage.
Be certain your appliance is
~
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Only connect power to the
~
appliance when all installation and
plumbing work is complete.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Installation
In refrigerators with an automatic ice
~
maker, avoid contact with the moving
This appliance is top-heavy and
must be secured to prevent the
possibility of tipping forward.
Keep the doors closed until the
appliance is completely installed
and secured per the installation
instructions.
parts of the ejector mechanism, or with
the heating element located on the
bottom of the ice maker. Do not place
fingers or hands on the automatic ice
making mechanism while the
refrigerator is plugged in.
Do not use water that is
~
microbiologically or chemically unsafe
or of unknown quality without adequate
disinfection or other treatment before or
after the filter is used; the filter alone is
not an adequate safeguard.
This appliance must be installed
~
and connected in compliance with the
installation instructions.
Installation and repair work should
~
be performed by a Miele authorized
service technician. Work by unqualified
persons could be dangerous and may
void the warranty.
Use
This appliance is not designed for
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
Installation must comply with local
~
plumbing regulations and state laws.
Do not operate any appliance with a
~
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele’s Technical Ser-
vice Department.
– shops, offices and similar work
environments
– by customers in hotels, motels, Bed
& Breakfasts or similar residential
environments.
This appliance must not be used in
~
a non-stationary location (e.g. on a
This appliance is not intended for
~
outdoor use.
ship).
Do not install the fridge/freezer in a
~
room with too low an ambient
Persons who lack physical, sensory
~
or mental abilities, or experience with
the machine should not use it without
supervision or instruction by a
responsible person.
temperature, e.g., a garage, as this
may lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
To reduce the risk of injury, do not
~
The ice cube maker is not suitable
~
for connection to a hot water supply.
allow children to play in, on or near the
appliance, especially in the door hinge
area.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
After your appliance is in operation,
Never use a steam cleaner to clean
~
the appliance. Pressurized steam could
~
do not touch the cold surfaces in the
machine, ice cubes or frozen food,
particularly when hands are damp or
wet. Skin may adhere to these
extremely cold surfaces.
damage electrical components and
cause a short circuit.
Disposal of your old appliance
Do not refreeze frozen foods which
~
have thawed completely.
Before disposing of an old
~
appliance, first make the door latch or
lock unusable.
Do not handle frozen food or ice
~
with wet hands. Danger of injury.
Take off the doors.
~
Do not store or use gasoline or other
~
flammable vapors and liquids in the
Leave the shelves in place so that
~
children may not easily climb inside.
vicinity of this or any other appliance.
Consult with your municipal policy
~
on recycling.
Do not deactivate the water filter
~
display.
Be careful not to damage any part of
~
the pipework while awaiting disposal
Do not use sharp-edged objects to
~
remove frost and ice, or separate
frozen foods and remove ice trays.
They will damage the evaporator,
causing irreversible damage to the
appliance.
by:
-
puncturing the refrigerant
channels in the evaporator.
bending any pipework.
-
-
scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
Do not use defrosting sprays or
~
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
Your old refrigerator may have a
~
cooling system that used CFCs
(chlorofluorocarbons). CFCs are believed
to harm stratospheric ozone.
If you intentionally release this CFC
refrigerant, you can be subject to fines
and imprisonment under provisions of
environmental legislation. Make sure the
CFC refrigerant is removed and disposed
of by a qualified technician.
Do not use any oils or grease on the
~
door seal, as these will cause the seal
to deteriorate and become porous with
time.
Do not block the ventilation gaps in
~
the plinth or the top of the appliance
housing unit, as this can impair the
efficiency of the appliance, increase the
electricity consumption and cause
damage to the appliance.
SAVE THESE
INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Fridge-Freezer combination
aHinged door shelf
gMain switch to turn the appliance
On/Off
bShelves (height adjustable)
cDoor shelves (height adjustable)
dFloating drawer
hSmartFresh drawer
iIce maker
jWater filter
eControl panel
kSmall freezer basket
lLarge freezer basket
mIce cube container
fHumidity filter
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Fridge-Freezer combination
Control panel
aAccess button "p"
activates the control panel
gFood type(s) to be stored in the
SmartFresh drawer
(left: high humidity
right: low humidity)
bRefrigerator
cLeft SmartFresh drawer
dRight SmartFresh drawer
eFreezer
hOn/Off sensor button for the
SuperCool function
iOn/Off sensor button for the ice cube
maker
fTemperature display
X colder; Y warmer
jSensor button for the temperature
and door alarm*
Allows you to set the desired
temperature in the refrigerator or
freezer section
kWater filter change indicator*
* Only visible when the relevant
function is activated
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before use
Before using for the first time
Turning the appliance On/Off
The stainless steel surface of the
appliance is protected with a plastic
film, which protects it during shipping.
^ Open the upper appliance door.
Do not remove this protective film until
the appliance has been completely
installed.
^ Turn the appliance On/Off with the
After removing the protective film clean
the exterior surface with the supplied
stainless steel agent. This will aid in
preventing resoiling.
main switch.
The main switch is located on the
right-side underneath the control panel.
^ Clean the inside of the appliance and
the accessories with a mild solution
of warm water and liquid dish soap.
Dry with a soft cloth.
All zones are switched on or off
together.
If the appliance was transported or
laid horizontally for any reason, allow
it to stand vertical for at least 8 hours
before turning it on. Failure to do so
will affect the functioning of the
appliance.
Once on, the appliance begins cooling.
When the doors are open, the interior
lights come on.
The access button will light in the
control panel.
The preset temperatures (factory
default settings) are reached after a
few hours. Do not put any food in the
appliance until the preset
temperatures are reached.
,Turning off the appliance with
the main switch does not safely
isolate it from the power supply.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Using the settings
The selected sensor button appears
yellow and depending on the zone
selected additional sensor buttons may
appear on the control panel.
This appliance is operated with the use
of touch keys activated by a finger.
– An available button will appear white.
Depending on the zone selected, you
– A selected button will appear yellow. can now:
– adjust the temperature,
– select the SuperCool function, or
– select settings for the SmartFresh
drawers by food type, or
^ Touch the access button "p" so it
turns yellow.
– turn on the ice cube maker.
For additional information, see the
corresponding sections in this manual.
On the control panel you will now see
the sensor buttons of the four appliance
zones.
^ To de-select a zone touch the sensor
button for that particular zone so that
it turns white, or select another
sensor button.
At the right of the control panel there is
a sensor button to turn the ice maker on
and off.
When the ice maker is in operation, the
sensor button appears yellow.
^ To leave the settings menu, touch the
access button "p" so it turns white.
The last settings entered are stored.
If the access button is not pressed
the display will go out after approx.
30 secs.
^ To change settings (e.g., to set the
temperature, etc.), touch the sensor
button for the appliance zone you
wish to set.
The sensor buttons for the four
appliance zones now disappear from
the control panel.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Custom settings
Turning the button sound
On/Off
In the custom settings mode you can
select and change functions. The
function possibilities are described in
the respective chapters of this manual.
If you prefer the buttons to be silent
when touched, the button sound can be
turned off.
^ Touch the access button "p" so it
turns yellow.
Function
Display text
Temperature unit
°C - °F
†
(see "Setting the
temperature")
^ Touch the sensor button for the
RemoteVision
;
refrigerator section so it turns yellow.
Module settings
(optional accessory)
^ Note the position of the X button, but
do not touch.
Button sound on/off
(see "Settings")
=
^ Touch the access button "p" again so
it turns white.
No function
^
c
Only the access button "p" is visible.
To enter and exit the
Settings mode
^ Place one finger on the position of
the X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button "p" once.
Keep holding the X button down until
the following appears in the display
(approx. 5 seconds).
^ Tap the X button until = appears in
the display.
^ Touch the access button "p" to
confirm.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
^ By touching the X button, you can
choose between:
Turning off for longer periods
of time
= 0 : Button sound is off
= 1 : Button sound is on
= – : Return to menu.
If the appliance is not going to be used
for an extended time (for example,
during a vacation) some precautions
should be taken.
^ Touch the access button "p" to
confirm the setting.
^ Shut off the water supply line,
(several hours before switching off
the appliance)
^ Tap the X button until you see ; in
the display.
^ Touch the access button "p".
^ Take all food out of the appliance
You have now left the Custom settings
mode.
^ Turn the appliance off at the main
switch
^ Unplug the appliance
^ Empty the ice cube container
^ Clean the interior
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
^ Remove and discard the water filter
(secure the filter cap)
^ Leave the doors open to prevent
odors
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Temperature and door alarm
The appliance is equipped with an
alarm system, to ensure that the
Turning the temperature alarm Off
As soon as the alarm condition is
corrected, the alarm signal turns off
and the affected zone stops flashing in
the display. The "alarm" indicator goes
out.
temperature does not rise unnoticed
because of energy loss or open doors.
The alarm system is always
operational, it does not need to be
turned on.
Temperature alarm
If the temperature becomes too warm,
an alarm sounds, the "alarm" indicator
turns red and flashes. At the same time
the affected zone flashes in the display.
^ To turn the alarm off early, press
the "alarm" sensor button.
The alarm signal turns off. The "alarm"
indicator remains red and the
corresponding appliance zone
continues to flash until the alarm
condition is corrected.
If the freezer zone is affected, the
temperature display shows the warmest
temperature reached during the alarm.
The alarm will sound and the display
will flash if:
If the temperature in the freezer
zone reaches 0°F (-18°C) or higher,
check that food has not defrosted.
– too much warm air flows into the
appliance, for example when food is
being loaded, re-arranged, or taken
out.
Door alarm
If one of the appliance doors is left
open for over 5 minutes, an alarm
signal will sound and the "alarm"
indicator will turn red.
– large amounts of food are being
frozen at once.
– the power fails.
Turning the door alarm Off
Once the door is closed the alarm turns
off and the "alarm" indicator goes out. If
the door has not been closed properly,
the alarm will sound again after five
minutes.
^ To turn the alarm off early, press
the "alarm" sensor button. The "alarm"
indicator and signal will turn off.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the temperature
Setting the temperature in the
refrigerator and freezer
sections
Temperature range
The temperature can be selected within
the following ranges:
The refrigerator and freezer sections
can be set independently of each other.
– Refrigerator:
36°F to 46°F (2°C to 8°C)
^ Touch the access button "p" so it
turns yellow.
A temperature of 37°F (4°C) in the
refrigerator section is recommended.
– Freezer:
7°F to -11°F (-14°C to -24°C).
To freeze fresh food and store frozen
food for an extended period of time, a
temperature of 0°F (-18°C) is
suggested.
^ Touch the sensor button for the
refrigerator or freezer section so it
turns yellow.
The room temperature and the
installation location can affect the time it
takes for the appliance to get to the
desired temperature. If the room
temperature is too high, it may not be
possible for the appliance to reach the
lowest temperature.
^ Use the X and Y buttons next to the
temperature display to set the
temperature warmer or colder.
Tap the X and Y sensor buttons to
raise/lower the temperature 1°, or hold
them down to move through the
temperature range more quickly.
The temperature display on the
control panel always shows the
desired temperature.
When you have adjusted the
temperature, wait for approx. 6 hours if
the appliance is not very full and for
approx. 24 hours if the appliance is full
before checking the temperature, as it
will take this long for the appliance to
reach the temperature. If, after this
time, the temperature is still too high or
too low, you will need to adjust it again.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the temperature
Temperature unit
^ By touching the X button you can
select either Fahrenheit or Celsius for
the temperature display.
† 0: Fahrenheit
(Fahrenheit/Celsius)
The temperature can be displayed in
degrees Fahrenheit (°F) or Celsius (°C).
† 1: Celsius
† –: return to menu
^ Touch the access button "p" to
confirm the setting.
^ Touch the access button "p" so it
turns yellow.
^ Tap the X button until a ; appears in
the display.
^ Touch the access button "p".
You have left the Custom settings
mode.
^ Touch the sensor button for the
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
refrigerator section so it turns yellow.
^ Note the position of the X button, but
do not touch.
^ Touch the access button "p" again so
it turns white.
Only the access button "p" is visible.
^ Place one finger on the position of
the X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button "p" once.
Keep holding the X button down until
the following appears in the display
(approx. 5 seconds).
^ Tap the X button until † appears in
the display.
^ Touch the access button "p" to
confirm.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartFresh drawers
The SmartFresh drawers provide the
right combination of temperature and
humidity. The result is freshness up to
three times longer than in the other
zones of the refrigerator.
Using the SmartFresh drawers
^ Use the sensor button to select the
Storage temperatures
desired drawer.
For fresh foods that are not adversely
affected by cold, the best range is
32° - 37°F (0° - 3°C). This helps to keep
the food fresh considerably longer than
in the rest of the refrigerator, spoiling is
minimal.
The selected sensor button turns
yellow, and the sensor buttons for the
food choices appear.
The most recently selected food type(s)
appear yellow.
Humidity
The level of humidity in the SmartFresh
drawers is dependent on:
^ Use the sensor buttons to select the
desired food type(s), so they appear
yellow.
– the moisture content of the stored
food, and
– Several food types can be selected
at the same time.
– the quantity of food stored.
The closer the humidity in the appliance
matches the moisture content of the
food, the more moisture the food will
retain, and the fresher and crisper it will
stay over a longer period of time.
– To delete a food type, simply press it
again.
– Depending on the food types
selected, the optimal humidity is
determined for the crispers.
– The "deli" and "dairy" settings are the
most energy efficient.
^ Touch the access button "p" to
confirm the settings.
^ Place the food in the drawer.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SmartFresh drawers
For optimal storage conditions, it is
always best to store similar foods
together in one crisper.
Foods that are best stored under dry
conditions
– fresh fish and shellfish, meats,
poultry, sausage, dairy products and
deli salads.
Foods that are best stored under
moist conditions
– fresh produce, e.g., vegetables,
lettuce, herbs, mushrooms,
cabbage, fruit.
Remember that higher moisture levels
can only be attained when the food is
stored unpacked so air can circulate
freely.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the refrigerator efficiently
Different storage zones
– fresh bread dough, pastry dough,
cake batters,
Due to the natural circulation of air in
the appliance, there are different
temperature zones in the refrigerator.
Cold, heavy air sinks to the lowest
section of the appliance. Make use of
these different zones when placing
food in the appliance.
– dairy products.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
This appliance uses a dynamic
cooling feature to establish a
constant temperature during
cooling. As a result, the differences
between temperature zones are less
pronounced.
If storing high-proof alcohol, make
sure it is tightly closed and stored
upright.
Do not store cooking oil in the
refrigerator door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
Leave some space between items, so
air can circulate freely around them.
Make sure the ventilation slits are not
covered - this is important for the
cooling performance.
Do not allow food to touch the rear
wall of the appliance, it may freeze
to the wall.
Warmest area
To allow air to circulate efficiently,
do not pack food too closely
The warmest area is in the top section
of the door (storage shelf). Use this
area to store items such as butter and
cheese.
together in the refrigerator. Do not
cover the fan in the rear wall of the
refrigerator, as this is essential for
keeping the appliance cool.
Coldest area
The coldest area in the refrigerator is
directly above the SmartFresh drawers.
The temperature in the drawers
themselves is even colder.
Use these cold areas in the refrigerator
for all highly perishable foods, such as:
– fish, meat, poultry,
– deli meats, store-bought meals,
– dishes or baked goods containing
eggs or cream,
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the freezer efficiently
Freezing food
Placing food in the freezer
Fresh food should be frozen as quickly
as possible. This helps maintain the
nutritional value, vitamin content,
appearance and taste of the food.
Food to be frozen can be placed
anywhere in the freezer section.
Use the large freezer basket for large
quantities of food.
Never refreeze partially or fully
Load bearing capacity of the baskets:
defrosted food. Consume defrosted
food as soon as possible, it will lose its
nutritional value and spoil if left for too
long. Do not refreeze defrosted food
unless it has been cooked.
Small
Large
basket
basket
KF 18X Vi/SF
KF 19X Vi/SF
30 lbs
72 lbs
(14 kg)
(33 kg)
Before placing food in the freezer
41 lbs
94 lbs
^ When you are planning to freeze
large amounts of food (more than
4 ½ lbs [2 kg]), switch on the
SuperCool function ahead of time
(see "SuperCool").
(19 kg)
(43 kg)
^ Spread the food to be frozen across
the bottom of the freezer basket or
across the shelves, so that it will
freeze through to the core as quickly
as possible.
This will provide the food already in
the freezer with a protective boost of
cold air.
^ When placing items in the freezer,
make sure the packaging and
containers are dry, to keep them from
sticking together when frozen.
When freezing, make sure that
already frozen food does not come
into contact with fresh food being
frozen, this could cause the frozen
food to defrost.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the freezer efficiently
Defrosting
Cooling drinks quickly
Frozen food can be defrosted in
different ways:
To cool drinks quickly, switch on the
SuperCool function. See "SuperCool" for
more information.
– in a microwave oven,
– at room temperature,
Do not leave bottles in the freezer for
more than 1 hour, closed containers
could burst.
– in the refrigerator (the cold given off
by the frozen food helps to keep the
other food cold),
– in a steam oven.
Poultry It is especially important to
observe proper hygiene when
defrosting poultry. Never save the liquid
from defrosted poultry. Drain it away
and promptly wash the container, the
sink and your hands. Danger of
salmonella poisoning.
Fruit should be defrosted at room
temperature in its packaging, or in a
covered bowl.
Most vegetables can be cooked while
still frozen. Simply place directly into
boiling water or hot oil.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SuperCool
When the SuperCool function is
activated, the appliance is cooled as
quickly as possible (to a factory-preset
temperature).
Refrigerator: 35°F (2°C)
Freezer: -22°F (-30°C)
The temperature in the appliance now
begins to fall, with maximum cooling in
the zone selected.
SuperCool
Switching off SuperCool
When used with the refrigerator the
SuperCool function is ideal for the rapid
cooling of drinks and refrigerating large
quantities of food.
The SuperCool function automatically
switches off after:
Refrigerator: approx. 6 hours
Freezer:
approx. 52 hours
When used with the freezer the
SuperCool function is ideal for freezing
large quantities of unfrozen food. The
function should be switched on 4-6
hours before the fresh food is placed in
the freezer.
The sensor button turns white, and the
appliance continues running at normal
power.
To save energy, the SuperCool function
can be switched off early, once the
food and/or drinks are sufficiently
chilled.
If the max. freezing capacity is used,
24 hours are recommended.
This helps food to freeze quickly and
retain its nutrients, vitamins, flavor and
appearance.
Switching on SuperCool
^ Touch the SuperCool sensor button
so that it turns white.
The temperature display for the zone
selected returns to the original
temperature setting.
^ Touch the sensor for the refrigerator
or freezer (as desired) so it turns
yellow.
The appliance now continues running
at normal power.
^ Touch the SuperCool sensor button
so it turns yellow.
In the temperature display for the zone
selected, the new temperature setting
appears:
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ice cube maker
Once the ice cube container is full, the
ice cube maker switches off
automatically.
For the automatic ice cube maker to
operate, it must be connected to the
household water supply. See
"Plumbing".
Do not use the ice cube container
for rapid cooling of food or drinks.
The ice cube maker may become
blocked and be damaged.
Turning on the ice cube maker
^ Make sure that the ice cube
container is under the ice cube
maker, as far as possible.
Do not use the first three containers
of ice cubes from the ice cube
maker.
Ice cubes will not be produced unless
the container is completely closed.
Discard the ice produced in the first
24 hours after switching on the ice
cube maker.
This applies for the very first use,
and whenever the appliance has
been out of service for an extended
period of time.
^ Touch the sensor button for the ice
cube maker so that it turns yellow.
As soon as the freezer has cooled to a
freezing temperature, the ice cube
container fills with water. Cold air is
blown directly over the container.
The amount of ice cubes produced
depends on the temperature in the
freezer section. The lower the
temperature, the more ice cubes will be
produced in a given period of time.
As soon as the ice cubes are frozen,
they fall into the ice cube container.
Turning off the ice cube maker
The ice cube maker can produce
approx. 140 ice cubes within 24 hours.
Note: Ice production will vary due to
your water source temperature,
pressure and hardness.
The water supply line must be shut
off several hours before the
appliance or ice cube maker is
switched off.
The production volume of the ice
depends on the temperature in the
freezer. The lower the temperature the
more ice cubes produced.
After the appliance is turned on for the
very first time, it can take up to 10 hours
for the first ice cubes to drop out of the
ice cube maker and collect in the
container.
^ Touch the sensor button for the ice
cube maker so that it turns white.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic defrost
Refrigerator section and
SmartFresh drawers
Freezer section
The freezer section defrosts
automatically.
The refrigerator and SmartFresh
drawers defrost automatically.
The moisture generated in the
appliance collects in the evaporator. It
is automatically defrosted and
dissipated by the condenser
periodically.
During normal operation, condensate
and frost can form on the rear wall of
the refrigerator and drawers.
You do not need to remove this
build-up, it will defrost and evaporate
automatically with the heat generated
by the appliance.
This automatic defrosting system
enables the freezer to remain
permanently ice-free, while ensuring
that the food stored in the freezer stays
frozen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Moving the shelves
SmartFresh drawer
The shelves can be adjusted according These drawers are set on telescopic
to the height of the food.
tracks. They can be pulled in and out
for loading and unloading, or removed
for cleaning.
^ Using both hands, grasp the shelf
from underneath and lift slightly so
that the rear of the shelf is slightly
above the mountings.
^ Pull the shelf forward.
^ Move the shelf to the desired height,
then insert the (rear) hooks into
place.
^ Make sure the shelf is level.
^ Open the drawer.
Floating drawer
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
The floating drawer can be moved to
the left or right, moved to another shelf,
or removed.
^ Pull the drawer straight out, so that it
passes over the catches and remove.
^ To replace the drawer slide it straight
in along the rails.
^ Using a suitable object, e.g., coin,
turn the safety lock to a horizontal
position a.
^ On both sides of the drawer, pull the
latches b upward and lift the drawer
out of the refrigerator.
Push the tracks back into the
refrigerator to avoid injury.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
The divider in the drawer can also be
removed for cleaning.
^ Remove the drawer.
^ Lift the divider upward and out.
To re-insert the divider, slide it back
down along the tracks.
Important: If the divider is not in
place, the SmartFresh drawer will
not work properly.
Replacing the SmartFresh drawer
^ Completely extend the telescopic
tracks.
^ Lay the drawer on the tracks so that it
connects in the front and back.
^ Turn the safety lock back to the
vertical position.
^ Slide the drawer in.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Adjusting the door shelves
Removing the hinged door shelf
For easier loading, unloading, and
cleaning, the door shelves can be
shifted or completely removed.
^ Pull the stops upward and out of the
shelf, and remove the shelf lid
upward.
^ Now remove the hinged container
upward and out.
Removing the storage shelf
from above the drawer
^ Remove the rear finishing strip, move
the glass plate slightly toward the
rear, and carefully lift it upward and
out.
^ Using both hands, grasp the door
shelf by the frame and tip it slightly
forward.
^ Slide the tipped shelf up or down
along the slide-rails, and click it into
place with the lower hooks.
^ Make sure the shelf is level.
Removing a door shelf
^ Slide it upward all the way to the top
of the slide-rails, until it can be
removed.
Replacing a door shelf
^ Start at the top of the slide-rails and
slide the shelf down into the desired
position.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the interior fittings
Ice cube container
Small freezer basket
The ice cube container is set on
The small freezer basket can be
telescopic tracks, and can be removed removed for cleaning.
for loading, unloading and cleaning.
^ Slide the basket forward until
^ Slide the container forward until
resistance is felt.
resistance is felt.
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
^ On both sides of the container, pull
the latches (see arrow) upward and
lift the container out of the freezer.
Push the tracks back into the freezer
to avoid injury.
Replacing the ice cube container
^ Completely extend the telescopic
tracks.
^ Lay the container onto the tracks so
that it connects in the front and back.
^ Using a suitable object, e.g., coin,
turn the safety lock to a horizontal
position a.
^ Slide the container in.
^ On both sides of the basket, pull the
latches b upward and lift the basket
out of the freezer.
Replacing the small freezer basket
^ Fully extend the telescopic tracks.
^ Lay the basket onto the tracks so that
it connects in the front and back.
^ Turn the safety lock back to the
vertical position.
^ Slide the freezer basket in.
Replacing the large freezer basket
^ Place the basket into the freezer,
making sure it is seated correctly in
the connection holes.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To better maintain your appliance
avoid the following:
To reduce the risk of electrical
shock, disconnect the appliance
from the power supply by shutting
off the power main, tripping the
circuit breaker or unplugging the
power cord before maintenance.
– cleaners containing soda, ammonia,
thinners, or chlorides
– cleaners containing descaling
agents or lime removers,
– abrasive cleaners,
Never use cleaning agents
– dishwasher soap (powder),
– caustic (oven) cleaners,
containing abrasive substances
such as sand, soda, acids, chlorides
or chemical solvents.
– scouring pads, steel wool, hard
brushes,
Non-abrasive cleaning agents are
also unsuitable, as they can cause
matte areas to appear.
– glass cleaners,
– metal scrapers,
Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner (available
from Miele).
– eraser sponges,
– steam cleaning products.
Glass cleaners may be used to
clean the exterior. However do not
allow them to sit or "puddle", this can
cause damage to the surface.
Remove the cleaner promptly.
Only use a mild solution of warm
water and liquid dish soap to clean
this appliance.
Do not use a steam cleaner to clean
this appliance. Pressurized steam
could penetrate electrical
components and cause a short
circuit.
Do not allow water to get into the
electronic unit or lights.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Before cleaning
Appliance door
^ Stainless steel surfaces can be
cleaned using a non-abrasive
stainless steel cleaner.
^ To help prevent resoiling, a
conditioner for stainless steel can
also be used. Apply sparingly with
even pressure.
^ Use the main switch to turn the
appliance off completely.
The main switch is located on the right
side underneath the control panel.
Aluminum frames
The shelf frames are made of
aluminum.
^ Unplug the power cord.
^ Remove any food from the appliance
^ Clean the frames with a mild solution
and store it in a cool place.
of warm water and liquid dish soap.
^ Take out any removable parts,
e.g., shelves.
Aluminum is susceptible to
scratches and nicks, treat with care.
Cleaning the interior and
accessories
The aluminum frames may become
discolored or otherwise altered if
soiling is not cleaned away
promptly.
Use a mild solution of warm water and
liquid dish soap. Wash all accessories
and drawers by hand. Do not wash in a
dishwasher.
Do not use stainless steel cleaners;
lime removers; scouring pads, such
as pot scrubbers; or used sponges
that still contain abrasive cleanser
residue to clean the frames.
^ Clean the appliance as needed.
^ After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance doors open for a
short time, so the moisture can
evaporate.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Humidity filters
^ Clean the filters by rinsing them with
lukewarm water.
The two humidity filters, located above
the SmartFresh drawers, must be
removed for cleaning.
Do not clean in a dishwasher or
washing machine. This will damage
the filter.
^ Air-dry the filters.
^ Place the filters back in the filter
cover.
^ Put the filter cover back in place,
inserting the rear hooks first.
^ Re-insert the SmartFresh drawer.
^ Remove the SmartFresh drawer.
Ventilation slits
^ Check the ventilation slits in the base
panel regularly. Remove any dirt/dust
with a vacuum cleaner or brush.
Clean as needed.
Door seals
Do not use oil or grease on the door
seals. This may cause the seals to
deteriorate and become porous over
time.
^ Unhook the filter cover, 1. in each
side of the drawer and remove them
along with the filter mat downwards
starting from 2.
^ Clean the door seals with warm water
and dry thoroughly.
^ Remove the filter mat.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
After cleaning
Changing the light bulb
^ Return all shelves and accessories.
The lighting automatically switches off
after the door has been open for
^ Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the power outlet
and turn the appliance on.
approx. 5 minutes. This is not a fault.
After the bulb has cooled for a short
time it will turn on again.
^ Switch on the SuperCool function for
the freezer section. The freezer
section will cool down quickly.
If the light does not come on when the
door is opened briefly, the light bulb
should be changed.
^ Once the temperature in the freezer
section is cold enough, place food in
the freezer baskets and return them
to the freezer.
^ Use the main switch to turn the
appliance off.
To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.
Upper lighting
^ Grasp the front of the light cover with
both hands, and slide it back.
^ Carefully pull the cover forward and
out.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Side lighting
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold it with a soft cloth.
^ Turn the light cover counterclockwise
and pull out.
Never touch a halogen bulb with
bare fingers.
^ Remove the defective light bulb.
When inserting a glass halogen bulb
always hold it with a soft cloth.
^ Place the new bulb in the socket.
Halogen bulb type:
20 W/12 V/socket GY 6.35.
^ Slip the rear of the light cover back
into position, then pull it forward and
into place.
^ Pull the defective light bulb from the
socket.
^ Place the new bulb in the socket.
Halogen bulb type:
5 W/12 V/socket G 4.
^ Put the light cover back on and turn
clockwise into place.
^ Restore power to the appliance.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
The Appliance is supplied with an
active charcoal filter which improves
the taste and smell of ice cubes by
removing chlorine and other
substances from the incoming tap
water.
Note:
– After installing a new water filter and
switching on the ice maker, discard
the first 24 hours' worth of ice
production.
– If the ice maker has not been used
for a prolonged time discard any ice
cubes in the freezer, empty the
container and discard the ice
Additional water filters are available
from Miele.
production of the next 24 hours.
It is important to change the water
filter regularly.
– If the appliance or ice maker have
not been routinely used for several
weeks or months, or if the ice cubes
have an unpleasant odor, change
the water filter.
To avoid serious illness or death, do
not use water that is
microbiologically or chemically
unsafe or of unknown quality without
adequate disinfection or other
treatment before or after use of a
filter.
Water filter change indicator
The change indicator will appear
approx. every 6 months depending on
the quantity of ice produced.
– When the filter indicator lights red,
this is an indication that a filter
change will soon be necessary.
New water filters (Bypass and Active
charcoal filters) are available from
Miele.
^ When the filter indicator flashes red in
the display the filter must be
changed.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
Exchanging the water filter
Note: Air trapped in the system may
cause water and the filter cartridge
to eject forcefully. Use caution when
removing.
^ Remove the cap from the used filter,
3.
^ Take a new filter cartridge out of the
packaging and remove the protective
cap.
^ Push the cap onto the new filter
cartridge, 4.
^ Push in and rotate the filter cap on
the base panel of your appliance
counterclockwise 180°, 1.
^ Pull the used filter cartridge out of the
appliance, 2.
^ Push the filter cartridge with cap, in a
horizontal position, all the way into
the opening in the base panel, 5.
^ Rotate the filter cartridge clockwise
180° until the cap is in a horizontal
position, 6.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
Using an external water filter
If your household water supply already
has an external water filter installed,
leave the standard water filter (bypass
cartridge) installed in the appliance.
^ After the filter change the filter
indicator in the display still flashes.
The change must be be confirmed in
the electronic.
Confirming the filter change
^ Press and hold the filter change
sensor button.
^ At the same time place a finger on
the access button. Press and hold
both sensor buttons for approx. 5
seconds until a beep is heard.
The water filter change has been
confirmed and the filter change
indicator had been reset.
The filter change indicator goes out.
^ Close the door.
After installing a new water filter
discard the first 24 hours of ice
production.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
State of California
Department of Public Health
Water Treatment Device
Certificate Number
06 - 1775
Date Issued: March 10, 2006
Date Revised: April 3, 2008
Trad
e
mark/Mod
e
l
Designation
R
eplacement Elements
9000 077095
9000 077104
07134220
Miele 07134220
Manufacturer: Cuno, Incorporated
Th
e
wat
e
r tr
e
atm
e
nt d
e
v
i
c
e
(s) list
e
d on th
i
s c
e
rt
i
f
i
cat
e
hav
e
m
e
t th
e
t
e
st
i
n
g
r
e
qu
irements pursuant to Section
116830 of th
e
H
e
a
l
th and Saf
e
ty Cod
e
for th
e
follow
i
n
g
h
e
a
l
th relat
e
d contami
nants:
M
i
crob
Cysts
Turbidity
an c Contam
None
i
o
l
o
g
i
ca
l
Contam
i
nants and Turb
i
d
i
ty
Inor
ganic/Radiological Contaminants
None
Or
g
i
inants
Rat
e
d S
e
rv
i
c
e
Capacity: 740 gals
0.75 gpm
ow:
Rat
on:
e
d S
e
rv
i
c
e
F
l
Cond
i
t
i
ons of C
e
rtificati
Do not use where water is microbiologically unsafe or with water of unknown quality, except that systems certified for
cyst reduction may be used on disinfected waters that may contain filterable cysts.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Water filter
Performance Data Sheet For Filter Model 07134220
Using Replacement Cartridge 07134220
This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of the substances
listed below. The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 42 and 53.
Note that while the testing was
performed under standard
laboratory conditions, actual
performance may vary.
System tested and certified by NSF International in Model 07134220
against NSF/ANSI Standard 53 for the reduction of Cysts and
Turbidity and against Standard 42 for the reduction of Chlorine Taste
and Odor; Nominal Particulate Class I.
To a capacity of 739.68 gallons (2800 liters).
Substance
Average
Influent
Concentration
Influent Challenge
Concentration
mg/L
Product
Water
Concentration Reduction
Average Maximum Permissible
Max.
Min. %
NSF
Test
%
Product Water
Concentration
Effluent Reduction
Cysts*
166500 Minimum 50,000/L
1
99.99
97.09
99.95
1
99.99
95.42
516458-05
516456-05
Turbidity
10.7
11 + 1 NTU
0.31
0.5 NTU
0.49
Particulate
Class I Particle size:
> 0.5 to < 1 um
Chlorine taste
and odor
At least 10,000
particles/ml
5700000
1.9
30583
0.05
99.52
97.3
> 85%
> 50%
69000
0.06
98.9
511079-03
511081-03
2.0 mg/L 10%
96.84
* Based on the use of Cryptosporium parvum oocysts
IMPORTANT: Must be installed and operated
in accordance with application guidelines.
Application Guidelines/Water Supply Parameters
Water pressure
Water temperature*
Service flow
30- 120 psi (207 - 827 kPa)
33°F - 100°F (0.6°C - 38°C)
0.75 gpm (2.83 lpm)
Failure to do so may void warranty.
Change filter at least every 6 months.
Flush new cartridge for 3 minutes.
CAUTION: To avoid property damage due to water
leakage, you MUST read and follow these operating
instructions before installation and use of this
product.
For estimated costs of replacement
elements please visit your local appliance
dealer or parts distributor.
WARNING: Do not use with water that is
microbiologically unsafe or of unknown quality
without adequate disinfection before or after the
system. Systems certified for cyst reduction may be
used on disinfected waters that may contain filterable
cysts.
NSF is a registered trademark of NSF International.
CUNO is a trademark of 3M Company used under license.
© 2007 3M Company. All rights reserved.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Lead free certificate
This product KF 1801 SF, KF 1811 SF (KIMBM30US) / KF 1901 SF, KF 1911 SF
(KIMBM36US) is tested and certified by WQA against ORD0902 for California
"lead free" compliance.
Miele & Cie. KG
Carl-Miele-Straße 29
D-33332 Gütersloh
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide minor problems can be corrected without a ser-
vice call.
Repairs should only be carried out by a qualified and trained person in strict
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage and may void the warranty.
Problems with temperature
Issue
Possible fault
Solution
The refrigerator The machine is not
Check whether the appliance is
switched on at the main switch. The
temperature display must be lit up.
or freezer
turned on.
section does
not get cold.
The machine is not
plugged in.
Check that the plug is correctly
inserted in the power outlet.
Check that the fuse has Reset the circuit breaker.
not tripped.
If the breaker trips again the
appliance or the outlet may be
defective. Contact Miele or a
qualified electrician.
The temperature is set
incorrectly.
Check the display.
The
Select a warmer
See "Selecting the correct
temperature".
temperature in temperature.
the refrigerator
The SuperCool function SuperCool automatically shuts off
or freezer
section is too
low.
is still on.
after: 6 hours for refrigerator;
52 hours for freezer.
The door is not closed.
Check that the doors have been
closed properly.
A large amount of food
is being frozen at the
same time.
This makes the compressor run
longer, causing the temperature in
the freezer section to fall
automatically.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems with temperature
Issue
Possible fault
Solution
The freezer section is
too warm.
The room temperature is Raise the temperature of
lower than the ambient the room.
temperature for which the Operating the appliance
appliance is designed.
in a room that is too cold
will cause the cooling
system to switch off for
too long, causing the
freezer section to become
too warm.
The temperature display This is not a fault. If the ice maker is turned on while
for the freezer shows
-18°C, although I have
set a higher
the ambient temperature of the room is (<+18 ° C), a
temperature of -18°C is automatically displayed. Only
then will the ice maker function properly.
temperature.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
General problems
Issue
Possible fault
Solution
Water is flowing out of Close the shut-off valve immediately.
the appliance.
Check whether the water
pipe in the appliance is
defective.
Contact Miele Technical
Service.
Check whether the water
pressure is too low.
Contact a plumber.
Check whether the correct Self-tapping valves and
water valve has been
installed.
3/16" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
The door to the
This is not a fault.
Wait a few minutes, then
try again. It should now
open without force.
freezer section will not The suction caused by
open.
opening and closing the
door too many times in
succession prevents it
from opening.
The compressor kicks The ventilation slits in the
Clean with a vacuum or
on very frequently and plinth and in the top of the brush.
for too long.
appliance are covered or
dusty.
The doors have been
Once the fridge gets down
opened too frequently, or a to the set temperature the
large amount of fresh food compressor will turn off.
has been put in at once for
freezing.
The door is not closed.
Check that the doors have
been closed properly.
Nothing shows in the Power is not reaching the Check the power supply to
display. appliance or there has the machine.
been a power failure.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Alarm / Indicator warnings
Issue
Possible fault
Solution
The alarm is ringing.
The appliance door(s)
have been open for
longer than 5 minutes.
Close the door(s).
The alarm is ringing and The door is not closed.
Once the alarm condition
has been corrected, the
alarm will turn off and the
"alarm" indicator will stop
flashing.
the "alarm" indicator for
A large amount of food is
the door or temperature
being frozen at the same
is flashing.
time.
There has been a power The temperature indicator
failure.
will indicate the highest
temperature reached
during the alarm.
The filter display is red. This is a warning that the Order replacement filters
water filter needs to be
changed soon.
from Miele.
The filter display is
flashing red.
The water filter needs to
be changed.
See "Exchanging the
water filter".
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems with the ice maker
Issue
Possible fault
Solution
The ice cube maker
will not switch on.
The appliance is not
plugged in.
Check that the appliance
is connected to the power
supply.
The ice cube maker
When the appliance is turned on for the very first time, it
is not producing any can take up to 10 hours for the first ice cubes to drop
ice cubes.
out of the ice cube maker and collect in the container.
The appliance is not turned Check that the appliance
on.
is switched on.
Contact Miele.
The water supply line was
not primed (purged of air)
before the appliance was
used for the first time.
Check if:
See "Ice Cube Maker"
and/or "Plumbing" for more
information.
– the ice cube maker is
switched on.
– the water supply line is
open.
– there are ice cubes stuck
together and blocking the
exit.
– the ice cube container is
in the right position.
– the freezer compartment
temperature is too high.
– the water pressure is too
low. The water pressure
must be between 25 and
120 psi (1.72-8.25 bar).
Check whether the correct
water valve has been
installed.
Self-tapping valves and
3/16" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems with the ice maker
Issue
Possible fault
Solution
The ice cubes are
small.
Other domestic appliances Avoid using such items as
that use water are in
operation.
a dishwasher, washing
machine or shower at the
same time.
Check whether the water
filter needs changing.
See "Water filter" for more
information.
Check the water pressure.
The water pressure must be
between 25 and 120 psi
(1.72-8.25 bar).
Consult a plumber.
Check whether the correct
water valve has been
installed.
Self-tapping valves and
3/16" (4.76 mm) saddle
valves reduce the water
pressure and can block
the pipe.
The ice cubes have When ice is stored for an
Use the ice maker more
frequently.
an unpleasant
odor/flavor.
extended period it may
absorb odors, which affects
the taste.
Check if the ice cube
container is dirty.
Clean the container.
Unsealed packages in the
freezer will transfer
odor/flavor particles to the
ice cubes.
Check that food has been
packed in airtight
containers.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
Problems with the ice maker
Issue
Possible fault
Solution
The ice maker is not
producing enough ice
or the ice cubes are
misshapen.
Check the water
Contact a plumber.
pressure. The water
pressure must be
between 25 and 120 psi
(1.72-8.25 bar).
Check that the freezer
temperature is not too
low.
See "Selecting the correct
temperature".
Change the water filter.
See "Water filter".
Ice is forming in the
supply hose to the ice
maker.
Check the water
Contact a plumber.
pressure. The water
pressure must be
between 25 and 120 psi
(1.72-8.25 bar).
Check whether the
See "Selecting the correct
temperature".
freezer compartment
temperature is too high.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
The appliance is making noises.
Issue
Possible fault
Solution
Brrrrr...
Humming noise made by the
compressor. This noise can get
louder for brief periods when the
motor is switching on.
These noises are not a
fault.
The noise of the
compressor and the
coolant circulating in
the system is
Blubb, blubb...
Click...
A gurgling noise can be heard
when coolant is circulating
through the pipes.
unavoidable.
Clicking sounds are made when
the thermostat switches the
compressor on and off.
Sssrrrrr...
On multi-zone and frost-free
appliances you can sometimes
just hear the movement of air
circulating inside the appliance.
Creaking
Creaking sounds can be heard
when material inside the appliance
expands.
Rattling, vibrating The appliance is uneven.
Realign the appliance
using a level, by
raising or lowering the
screw feet underneath
the appliance.
The appliance is touching another Move it away.
appliance or piece of furniture.
Drawers, baskets or shelves are
unstable or sticking.
Check all removable
items and refit them
correctly.
Bottles or containers are unstable Separate them.
or knocking against each other.
The transport cable clips are
hanging loose at the back of the
appliance.
Remove the clips.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot MieleCare
easily fix yourself, please contact the
(USA only)
Miele Technical Service Department at
the address on the back of this booklet. MieleCare, our Extended Service
Contract program; gives you the
When contacting the Technical Service
assurance of knowing that your
department, please quote the model
appliance investment is covered by 5
and serial number of your appliance
years of worry-free ownership.
given on the data plate inside the
MieleCare is the only Extended Service
appliance.
Contract in the industry that guarantees
repairs by a Miele Authorized Service
Provider using genuine Miele parts.
Only genuine Miele parts installed by
factory-trained professionals can
guarantee the safety, reliability and
longevity of your Miele appliance.
Please note that unless expressly
approved in writing by the Miele Ser-
vice department, Extended Service
Contracts offered by other providers for
Miele products will not be recognized
by Miele. Our goal is to prevent
unauthorized (and untrained) service
personnel from working on your Miele
products, possibly doing further
damage to them, you and/or your
home.
To learn more about MieleCare
Extended Service Contracts, please
contact your appliance dealer or visit
us online at:
47
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation instructions
Information is subject to change. Please refer to our website to obtain the most
current product specification, technical & warranty information.
To prevent accidents
and machine damage
read these instructions
before
installation or use.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are biodegradable and
recyclable. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling center about the
possibility of recycling these materials.
Ensure that any plastic wrappings,
bags, etc., are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Before discarding an old appliance,
disconnect it from the electrical supply
and cut off the power cord to prevent it
from becoming a hazard.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation site
Have the appliance installed by a
qualified technician, according to
the enclosed installation instructions.
The appliance should be installed in a
dry, well-ventilated room.
Do not install the appliance:
- outdoors
,WARNING
- in an environment with dripping
water
This appliance is top-heavy and
must be secured to prevent it from
tipping forward.
- in rooms that are at risk of frost.
Keep the doors closed until the
appliance is completely installed
and secured as per the installation
instructions.
The installation location should not be
exposed to direct sunlight, nor near a
heat source, such as an oven,
radiator, etc.
The ambient temperature should not
drop below 55°F (13°C) or rise above
110°F (43°C), otherwise malfunctions
may occur.
Empty weight of your machine:
KF 18X1 SF . . . . . . . . 511 lbs (232 kg)
KF 19X1 SF . . . . . . . . 562 lbs (255 kg)
If installation next to a heat source is
unavoidable observe the following
minimum distances from the heat
source:
– 1 1/4" (3 cm) from an electric cooktop
or electric oven.
– 12" (30 cm) from a gas or oil
cooktop, range or oven.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Base
Ventilation
A fully loaded appliance is very heavy.
The load-bearing capacity of your floor
must meet the following requirements:
The air intake and outlet must not be
blocked or covered in any way. They
also need to be dusted/cleaned on a
regular basis.
KF 18X1 SF . . . . . . . 1,007 lbs (457 kg)
KF 19X1 SF . . . . . . . 1,250 lbs (567 kg)
Installation niche
To ensure that the appliance is installed
securely and functions properly, the
base must be flat, level and made of a
hard, rigid material.
To ensure safe, trouble-free installation
and the best possible cosmetic result,
check to be sure that the installation
space complies with the installation
dimensions. See "Niche dimensions".
If in doubt, contact Miele.
The side walls of the installation cavity
must be plumb.
Furniture/fixtures
The new appliance will be mounted
securely to adjacent and overhead
furniture/fixtures.
The minimum thickness of the side
walls and the top wall must be 5/8"
(16 mm).
For this reason, it is essential that all
attachable furniture/fixtures be
connected securely to the floor or wall
by a suitable means.
The minimum thickness of the toe-kick
panel must be ½" (13 mm). A thickness
of 3/4" (19 mm) is recommended.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Stainless steel panels
Side-by-side
Stainless steel door panels and toe-kick This appliance can be installed
covers are available from Miele.
"side-by-side" with another
fridge/freezer using a "Merging Kit".
Installation options
The "Merging Kit" is available from
Miele.
There are many different installation
options. You are limited only by the
design of the kitchen.
Contact Miele or your dealer for
specific information about which
combinations will work with your
appliance.
The door hinge cannot be
exchanged.
For instructions on how to attach the
appliances and install the heating
mat, please refer to the instructions
included with the "Merging Kit",
available from Miele.
Single column
The appliance can be installed at any
preferred location in the kitchen.
However, be sure the door will open
and close properly in the chosen
location.
Appliances attached together using
the "Merging Kit"
If the appliances are installed directly
next to each other (without a partition),
they need to be attached together
using the "Merging Kit".
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation with partition using the
"Merging Kit"
Side panels
If one side of the appliance is visible, a
side panel must be used.
The minimum thickness of the partition
is 5/8" (16 mm).
The side panel must be firmly secured
to the wall, the floor and the overhead
furniture/fixtures before the appliance is
placed in the cavity.
The dimensions of the side panel are
taken from the opposite wall of the
installation space. During installation,
ensure that the cavity is square and the
measurements are correct.
If there is a partition with a thickness
from 5/8" (16 mm) to 6 5/16" (160 mm)
between the adjacent appliances, then
each appliance should be individually
installed within its own niche using the
mounting accessories included.
The "Merging Kit" will also be needed.
The "Merging Kit" is available from
Miele.
Installation with partition without
using the "Merging Kit"
If there is a partition with a thickness of
more than 6 5/16" (160 mm) between
the adjacent appliances, then each
appliance should be individually
installed within its own niche using the
mounting accessories included (the
"Merging Kit" is not necessary).
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Adjusting the door opening
angle (optional accessory)
Depending on the installation site, it
may be necessary to adjust the door
opening angle to 90°.
^ Open the door.
^ Insert the banking pin through the
holes and drive in with a hammer.
The door opening angle is now limited
to 90°.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Door dimensions (opening angle 90°)
A
KF 18X1 SF 32 5/8" (829 mm)
KF 19X1 SF 38 11/16" (982 mm)
Door dimensions (opening angle 115°)
A
B
KF 18X1 SF 32 5/8" (829 mm) 14 5/16" (363 mm)
KF 19X1 SF 38 11/16" (982 mm) 16 7/8" (428 mm)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Niche dimensions
A
B
KF 1801 SF, KF 1811 SF
KF 1901 SF, KF 1911 SF
30 ½" (774.6 mm)
36 ½" (927 mm)
30" (762 mm)
36" (915 mm)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Power supply and water connection
1. Power supply
2. Water connection
A
KF 18X1 SF 15" (381 mm)
KF 19X1 SF 18" (458 mm)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Before you begin
– Adhesive tape
– Multi-grip pliers
– Level
Read these instructions completely
and carefully.
Have the appliance installed by a
qualified technician, according to
the enclosed installation instructions.
– Tape measure
– Square
When fastening the cabinet to the wall
behind it (see "Installing the appliance")
use:
To reduce the risk of injury or
damage to the product, two people
should be used for installation.
– suitable plugs/screws depending on
the type of wall.
These installation instructions are
intended for use by qualified installers.
In addition to these instructions, the
appliance must be installed in
accordance with all local codes. In the
absence of a local code, the following
should be used:
– several mounting brackets, if required.
Other
– Stepladder
– Dolly, hand truck
– Wooden beam (cross section
min. 3" x 4" [75 mm x 100 mm] as an
alternative tilt protection, length
depends on the width of the
installation cavity)
– In the USA, the National Electric
Code, ANSI/NFPA 70 - latest
edition/State and Municipal codes
and/or local codes.
– In Canada, the Canadian Electric
code C22.1 - latest edition/Provincial
and Municipal codes and/or local
codes.
– Wood screws in different sizes
Optional accessories
– "Merging Kit" for side-by-side installation
Tools needed for installation
– Cordless screwdriver
– Torx screwdriver
– RemoteVision module for wireless
monitoring
– Hammer drill
– Wood drills in different sizes
– Hammer
– Rachet (5/16" / 8 mm)
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Aligning the housing unit
Check the installation niche
To ensure a safe, trouble-free
installation and the best possible
cosmetic result, check to be sure
that the installation space complies
with the installation requirements.
^ Check the base (see "Installation").
^ Check the dimensions of the cavity.
^ Check that the cavity is square.
^ Check the location of the power
outlet.
^ Check the location of the water
connection (see "Plumbing").
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
^ Check that all furniture parts in the
vicinity of the appliance are securely
connected to the wall.
^ Check that the adjacent
furniture/fixtures do not collide with
the open door.
– The side panels of the housing must
be even.
Before installation
– The housing unit panels must be at
least 16 mm thick.
,Caution - the appliance is very
heavy. Use caution when unpacking
and opening the door, danger of
tipping.
– The plinth facing must be at least
13 mm thick (or preferably 19 mm).
^ To protect the base from damage
during installation, attach a hard
board, linoleum, etc., to the floor in
front of the intended installation
location.
^ Take the supplied accessories out of
the protective packaging.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
RemoteVision module
installation
There are transportation safety
devices inside the appliance to
protect the shelves and storage
compartments until installation is
complete. Do not remove them, or
parts may be damaged.
(optional accessory)
Always disconnect the appliance
from the power supply when
performing installation, maintenance
or service work.
^ Check the appliance for damage in
Install the RemoteVision module
before placing the appliance in its
installation niche.
transit.
Do not install the appliance if it is
visibly damaged. If in doubt, contact
your dealer.
Once connected the RemoteVision
module will increase the energy
consumption of the appliance.
The slot for the RemoteVision module is
located in the lower area of the back of
your appliance.
^ Loosen the bracket that holds the
appliance to the pallet.
,Caution! The appliance is no
longer secured and may be unstable.
^ Unscrew the screws a on the cover
b and pull off the sticker c.
^ From the rear of the appliance
carefully lift it from the pallet.
Once the appliance is on the ground it
can be wheeled around.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
^ Remove the cover b.
^ Pull the antenna d straight out.
^ Push the module into the slot until it
locks into place.
^ Guide the cover b over the antenna
d and screw on the cover.
^ Connect the appliance to the power
supply and turn it on. After several
seconds the indicator light e will
come on.
^ Angle the antenna d so that it faces
to the right or left.
If necessary, disconnect the power
supply and continue installing the
appliance.
The indicator light will display different
colors one after the other; any control
light at the end indicates that the
module was correctly installed.
Preparing the installation
niche
If the indicator light does not come on,
installation of the module was
unsuccessful. In that case, repeat the
process. If that does not correct the
problem, contact Miele.
,Keep the appliance door closed
until it is securely fastened in the
niche. Tipping hazard.
Because of the size and weight of
the appliance, it is essential to
ensure that the appliance cannot tip
over once it has been mounted in
the niche.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Mounting Accessories
The mounting accessories needed for
installing the appliance into the niche
are included in the packaging. Several
plastic bags are included which are
numbered alphabetically.
The bag needed for each step will be
marked with its respective letter.
The distance "D" between the anti-tip
brackets b is the width of the
appliance.
^ Use the included Torx screwdriver to
tighten the screws.
^ Position the anti-tip brackets b on
the left and right walls of the
appliance niche.
Anti-tip brackets
The anti-tip brackets help keep the
appliance safely secured to the
installation niche to prevent tipping.
^ Mark the holes through the anti-tip
brackets b on the floor of the
installation niche.
Two anti-tip brackets are
^ Set the brackets aside.
recommended for each appliance or
appliance combination (side-by-side).
Screws are supplied with the
appliance for various
applications/materials.
If the anti-tip brackets cannot be
attached securely with the screws
supplied, an alternative anti-tip
device can be used.
If the installation niche is deeper than
the appliance, a solid wooden beam a
can be placed behind the anti-tip
Assure that there are no electrical
wires or plumbing in the area which
the screws could penetrate-risk of
injury and damage.
brackets b so the appliance can be
securely attached to the base or wall.
The length of the wooden beam a
should be the width of the installation
space.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
In a cabinet with a back wall
^ Drill pilot holes:
–
1/8" (3 mm) for 5 x 60 mm wood
screws
–
1/16" (2 mm) for 4 x 15 mm wood
screws.
^ screw the back wall of the cabinet in
several places directly to the wall
behind it.
^ Tightly secure the anti-tip brackets in
For this, use suitable plugs/screws
depending on the type of wall.
the niche.
Be certain that the screws penetrate
through the flooring and into the wall
plate a minimum of 3/4" (19 mm).
In a cabinet without a back wall
If the included anti-tip brackets cannot
be secured in the niche, the built-in
cabinet must be secured to the wall
behind it with several screws. Only in
this way can the appliance later
secured in the built-in cabinet be
prevented from tipping.
^ screw the cabinet to the wall behind
it in several places using suitable
mounting brackets.
For this, use suitable plugs/screws
depending on the type of wall.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Securing an alternative anti-tip
device
– The beam must cover the appliance
by at least 2" (50.8 mm).
^ Mark the installation height (lower
edge of the beam) on the rear wall of
the niche.
^ Select screws according to the
thickness of the wooden beam.
Example: 3 ½" (89 mm) screw for 2x4
beam.
Determine the number of screws
based on the cavity width, to ensure
that the beam will be attached
securely.
^ Locate wall studs near the rear wall
of the cavity and mark drill holes in
the beam.
^ Pre-drill the wooden beam.
^ Attach the wooden beam to the rear
wall of the niche.
If the anti-tip brackets cannot be
attached securely, an alternative
anti-tip device can be used.
Now prepare the water connection
from the appliance to the main
supply line (see "Plumbing").
Ensure that there is no "give" between
the appliance and the anti-tip device.
If possible, always screw the
wooden beam to existing studs.
^ Cut a wooden beam
(cross section min. 3" x 4"
[75 mm x 100 mm]) to the required
length.
– The length is equal to the width of
the installation niche.
– If the installation niche is deeper than
the appliance, select a beam with a
larger cross section, or attach two
beams.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Sliding the appliance into the
installation niche
If a side-by-side installation is
desired, connect the two appliances
together. See the Installation Manual
included with the "Merging Kit".
^ Open the bottom door.
^ To protect the corners of the
installation space, attach the
supplied edge protector a on both
sides with adhesive tape.
^ Plug the appliance into the power
outlet b.
^ To remove the stainless steel front,
loosen the two nuts and remove the
cover strip.
The plug of the appliance should be
easily accessible after installation.
If the plug is not accessible after the
appliance has been installed,
disconnection from the power
supply should be completed via the
circuit breaker.
In the case of side-by-side
installations, a separate outlet must
be used for each appliance.
^ Unscrew the plinth.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
^ To prevent the power cord from
becoming caught:
Tie a piece of string to the middle of
the power cord and feed it forward
under the appliance. When sliding
the appliance in, pull the cable
forward c.
^ Carefully slide the appliance into the
space until the height-adjustable
wheels interlock with the anti-tip
brackets d.
If resistance is felt when attempting to
slide the appliance into the installation
niche - for example, because the floor
is uneven,
^ Turn the rear adjustable wheels
slightly outward (see "Aligning the
appliance"), then push the appliance
in.
Be careful not to damage the water
pipe or power cord attached to the
floor.
^ Remove the edge protector a.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Aligning the appliance
^ Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
dimension 1 1/4" (32 mm). The guide
dimension of 1 1/4" (32 mm) is
related to a niche height of 84"
(2134 mm).
^ Align the appliance with the custom
front.
Important!
The height-adjustable feet can only
be unscrewed as far as the mark 2
3/16" (62 mm) on the base (max.
niche height of 85 3/16" (2164 mm).
The height-adjustable feet at the front
and rear can all be adjusted from the
front:
– Front feet:
Adjust with a rachet 5/16" (8 mm) e.
– Rear feet:
Adjust with a (cordless) screwdriver
and/or a rachet 5/16" (8 mm) for fine
adjustment f.
^ Align the custom doors with a level.
Important!
^ If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
When unscrewing the
height-adjustable feet, proceed
gradually, alternating between left
and right.
Note:
– The adjustment of the rear feet is
aided if the appliance is lifted at the
rear (tipped forward slightly).
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Attaching the appliance to the
installation niche
^ Open the appliance doors.
^ Open the lower appliance door and
hand the stainless steel cover on the
double-threaded bolts.
^ Screw the nuts onto the
double-threaded bolts.
^ Replace the cover strip.
^ Fasten the appliance on the left and
right hand sides with the 3 (supplied)
wood screws.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
Now connect the water supply to the
appliance (see "Plumbing").
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Attaching the toe-kick cover
The maximum height of the toe-kick
cover is 4" (101 mm) from the top of
the floor. Do not cover the ventilation
slits in the plinth. Risk of damage to
the appliance.
^ If required, cut the toe-kick cover to
the required length and height.
^ Remove the foil from the adhesive
strips.
^ Attach the toe-kick cover to the
plinth.
^ Attach the plinth to the appliance,
and put the included cover plates in
place.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the appliance
Mounting the air separator
The air separator keeps the supply and
exhaust air separate. This prevents
warm exhaust air from flowing into the
machine, optimizing the energy
performance of the unit.
^ If necessary, shorten the three parts
of the air separator.
^ Insert the foam pieces back into the
^ Clip the air separator, left and right of
the partition, in the exhaust grille. Be
sure that it clicks into place and
guides the foam partition under the
exhaust grille.
sides.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
All plumbing work should be carried
out by a suitably qualified and
competent person, in accordance
with all applicable local and national
regulations.
The water quality must conform to
country requirements for drinking
water.
– The appliance is only suitable for
connection to the cold water supply.
– The water pressure must be between
25 and 120 psi (1.72-8.25 bar).
– A separate shut-off valve must be
installed, so that the water supply
can be interrupted as needed.
– The maximum outer diameter of the
water pipe (without fittings):
3/8" (10 mm).
The shut-off valve for the water
connection must not be located
behind the appliance. It is
recommended to place the shut-off
valve directly next to the appliance
(base unit) or in another easily
accessible location.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Preparing the water connection For appliances with a hose guide
The connection to the household
water supply must be installed
before the appliance is installed.
^ Turn off the main water valve to prevent
damage caused by leaking water.
^ Attach the connecting pipe to the
shut-off valve, according to the
instructions supplied by the
manufacturer of the ice cube maker
installation kit.
^ position the device in front of the
niche and push the stainless steel
tube through the hose guide at the
back of the unit.
^ Install the connecting pipe. Always
observe the indicated clearance
dimensions to prevent damage to the
connecting pipe when pushing in the
appliance.
At this point the niche should be ready
for the appliance to be pushed back
into it (see "Installing the appliance").
^ You can now continue with the
installation.
^ Secure the connecting pipe to the
floor with adhesive tape.
^ You may now proceed to install the
appliance. See "Installing the
appliance".
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Plumbing
Connecting the water supply
^ Push the union nut and seal onto the
water pipe.
When connecting the water pipe to
the solenoid valve of the appliance,
follow the instructions supplied by
the manufacturer of the ice cube
maker installation kit.
^ Push the end of the water pipe into
the appliance connection and screw
on the union nut, 3. First tighten by
hand.
^ Then use an open-ended wrench to
tighten the union nut. Do not over
tighten.
When bending the water pipe, be sure
not to kink it, otherwise there is a risk of
leaks and water damage.
^ Open the shut-off valve and the main
water connection. Check for leaks at
the connection for the shut-off valve
and to the appliance.
Use bending aids.
^ Switch the appliance on.
After a maximum of 10 hours the first
ice cubes will drop out of the ice
cube maker and collect in the ice
cube container.
^ Remove the cap from the appliance
connection, 1.
^ Bend the water pipe to suit the
location of the connection on the
appliance, 2.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
The appliance is supplied with a
UL-listed, 3-wire power cord and
NEMA 5-15 P plug ready for connection
to a 120 V, 60 Hz supply.
, Avoid the risk of electrical
shock
- Plug into a grounded 3-prong
outlet.
The fuse rating is 15 amps.
- Do not move the ground plug.
- Do not use an adapter.
- Do not use an extension cord.
The appliance requires a 3-wire
receptacle.
The receptacle must be installed by a
licensed electrician only.
Failure to follow these instructions
can result in death, fire, or electrical
shock.
In the case of side-by-side installations,
a separate outlet must be used for each
appliance. Ideally, the power outlet
should be next to the appliance and
easily accessible. Do not connect the
appliance to the power supply by an
extension cord. Extension cords do not
guarantee the required safety of the
appliance (danger of overheating).
Improper connection of the
equipment grounding conductor
may result in electric shock. If you
are in any doubt as to whether the
appliance has been properly
grounded, have the appliance
checked by a qualified electrician or
service technician.
If any changes are needed to the
household wiring or power supply, this
work must be performed by a qualified
electrician.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Before installing the appliance,
verify that the voltage, load and
circuit rating information found on
the data plate match the household
electrical supply.
If there are any questions regarding the
electrical connection of this appliance
to the power supply, please consult a
licensed electrician or call the Miele
Technical Service.
U1-800-999-1360
V1-800-565-6435
75
Download from Www.Somanuals.com. All Manuals Search And Download.
RemoteVision (optional accessory)
Miele's RemoteVision Wi-Fi technology
creates a 'virtual link' between your
appliance and our monitoring center. If
a fault occurs, Miele's client service
center will be notified and contact you,
or another trusted individual identified
on your call roster, in order to gain
access to your appliance to fix the
problem.
Be sure your wireless system meets the
following requirements
– A wireless router that supports an
IEEE 802.11b protocol
– Windows XP® or newer operating
system, Mac® OS X 10.3 or higher
– Cable or DSL modem
– Microsoft® Internet Explorer 6 or
higher, Safari 2.0 or higher, Firefox
1.5 or higher
For information on set-up and
installation of the RemoteVision module
see the "Installation" section of this
manual.
* Please note that each wireless router
manufacturer supplies their own device
drivers and setup programs. Due to the
differences in manufacturers, exact
router setup instructions are not
included in this manual. Wording and
instructions may vary.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
RemoteVision (optional accessory)
Accessing the RemoteVision
^ Tap the X button until ; appears in
the display.
control panel
^ Touch the access button "p" to
confirm.
See the table on the following page for
a description of each setting in the
display.
^ Touch the access button "p" so it
turns yellow.
^ Use the Y or X buttons to select the
^ Note the position of the X button, but
RemoteVision options.
do not touch.
^ Touch the access button "p" again so
it turns white.
The module has been connected to
the network when ; # appears in the
display.
Only the access button "p" is visible.
If ; # does not appear, refer to the
"Network options" section of the
XKM 2000 Installation Instruction
manual.
^ Place one finger on the position of
the X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button "p" once.
Keep holding the X button down until
the following appears in the display
(approx. 5 seconds).
^ Press and hold the access button "p"
for 2 seconds to confirm the change.
^ To return to the main menu, tap the X
button until a solid ; - appears in the
display.
^ Press the access button "p" to
confirm.
^ Tap the X button until a ; appears in
Access to the Custom settings mode is
now active for approximately 10
seconds.
the display.
^ Touch the access button "p".
You have left the Custom settings
mode.
When you are in the Custom settings
mode the door alarm is turned off
automatically. Once the door is
closed it is reactivated.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
RemoteVision (optional accessory)
MasterCool control panel options for RemoteVision
Status indicators Description of function
Flashing ; ~
Flashing ; ‡
Flashing ; |
Module booting phase
Not connected to network
Connection to network established, no IP address
assigned
Solid
; #
Connected to network
Flashing ; <
In Ad-Hoc Mode, not connected
In Ad-Hoc Mode, connected
Flashing ; =
Selectable
options
Description of function
; -
; 2
; 3
; 4
Back
Reboot the module
Reset to factory settings
Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ; - "Back", the module has not
been installed correctly.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 3712
M.-Nr. 09 169 650 / 02
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.
Download from Www.Somanuals.com. All Manuals Search And Download.
|