Build-up Unit
Model AK-HBU931P
Before attempting to connect, operate or adjust this product, please read these
instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Operating precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Controls and their functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Mounting methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
External dimension drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Overview
The model AK-HBU931P is a build-up unit which is designed for use with the AK-HC931P multi-format camera.
When installed in the multi-format camera, it enables a large lens to be mounted, thus yielding the same range of
operations as that afforded by a larger camera.
Operating precautions
≥ Be absolutely sure to supply the build-up unit’s power from the multi-format camera.
≥ Handle the viewfinder carefully.
Dropping the viewfinder or subjecting it to strong impact may cause malfunctioning and/or accidents.
≥ Operate the unit within a temperature range of 32oF to 104oF (0oC to + 40oC). Operation in locations below 32oF or above
104oF may adversely affect the internal parts.
≥ Be absolutely sure to turn off the power before connecting or disconnecting the cables.
≥ Do not use the unit outdoors.
≥ Install the unit at a distance of at least 3.3 ft (1 meter) from the monitor.
≥ Maintenance
Disconnect the optical fiber cable plug, and wipe the unitr with a dry cloth. To remove stubborn dirt, soak a cloth in diluted
kitchen detergent and wring it out well, and then wipe the unit gently.
Caution
≥ Avoid using benzine, paint thinners or other volatile substances.
≥ If a chemically treated cloth is to be used, read the precautions for its use carefully.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their functions
Front Panel
Top Panel
1
5
4
6
3
2
1 Lens guide
4 Camera mounting base
The 2/3z box-type lens is attached by hooking it onto this
guide. Align the guide pin of the lens with the center
groove, and attach.
This is used to attach the camera. For details, refer to
the operating instructions of the camera concerned.
5 Optical fiber cable for connecting camera [CAM]
Use this to connect the unit to the optical fiber connector
on the multi-format camera (AK-HC931P).
2 Lens anchoring knob
This is rotated clockwise to anchor the lens.
3 Lens connector
6 Interface cable for connecting camera [EXT I/O]
Use this to connect the unit to the EXT I/O connector on
the multi-format camera (AK-HC931P).
Lens connector (57-20360 made by DDK)
Pin No.
Signal
Pin No.
19
Signal
Pin No.
Signal
BU ACTIVE
ANALOG GND
RET-1
Pin No.
11
Signal
1
2
N.C.
N.C.
N.C.
N.C.
N.C.
1
2
MONITOR SIGNAL
MONITOR GND
DC +5 V
20
12
3
21
TALLY CONT1
N.C.
3
13
4
DC +12V
22
4
RET-2
14
DC +3.15 V
5
POWER GND
SIGNAL GND
DOBY GND
23
N.C.
5
RET-3
15
DC +2.7 V
6
24
LENS CODE (A)
LENS CODE (B)
LENS CODE (C)
LENS CODE (D)
EXT CONT A
EXT CONT B
N.C.
6
DIGITAL GND
CAMERA DATA
CAMERA CONTROL
DC +12 V
16
IRIS CONTROL
IRIS POSITION
ZOOM POSITION
FOCUS POSITION
IRIS AUTO/REMOTE
7
25
7
17
8
EXT. MODE (A)
EXT. MODE (B)
EXT. MODE (C)
16:9/4:3 SEL
IRIS POSITION
ZOOM POSITION
RET1
26
8
18
9
27
9
19
10
11
12
13
14
15
16
17
18
28
10
POWER GND
20
29
30
31
INCOM1 PROD/ENG
32
INCOM2 PROD/ENG
RET2
33
INCOM1 SW
INCOM2 SW
N.C.
FOCUS POSITION
IRIS CONTROL
IRIS AUTO/REMOTE
34
35
36
N.C.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their functions
Bottom Panel
Right Side Panel
8
7
9
7 Screw hole for mounting tripod (3/8-16UNC)
This is used to attach the unit to a tripod or other
accessory.
8 Hook for securing cable
The optical fiber cable from the CCU is fastened to this
hook.
9 Clip
This is used to attach the accessories.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their functions
Left Side Panel
Operation panel
; < 7 8
: G
I
9
H
2
4
1
3
6
E
5
D
F
BREAKER
MAIN
AC OUT(200VA)
ALARM
RESET
CCU
1
2
O
V
A
C
8
0
H
z
=
>
< ? @
;
:
= ? @
C J K
B
L
>
A
: Cable clamp
1 VF power switch [VF POWER]
This is used to clamp the optical fiber cable from the
This is used to set the viewfinder’s power to ON or OFF.
CCU.
When it is lighted, the viewfinder’s power is OFF.
; Optical fiber connector
2 Front tally ON/OFF switch [FRONT TALLY]
This is used set the viewfinder and lens tally lamp to ON
OPT FIBER connector (EDW.3K.93C.CLC made by LEMO)
or OFF. When the lamp is lighted, the tally lamp is OFF.
Pin No. Function
Polarity
Signal flow
CAM#CCU
CCU#CAM
CAM!#CCU
CAM!#CCU
CCU#CAM
CCU#CAM
1
2
3
4
5
6
Optical fiber
3 CENTER marker switch [CENTER MARKER]
Optical fibe
This is used to set the center marker to ON or OFF.
Control wire, hot
Control wire, cold
AC 240V live
+
–
+
–
4 CURSOR switch
This is used to set the cursor on the viewfinder screen to
ON or OFF. When it is lighted, the cursor is OFF.
AC 240V neutral
< AC outlet
5 Cursor memory switch 1
An AC output of up to 200 VA can be supplied to this
outlet.
If this switch is held down while the cursor switch is ON,
the current cursor status is stored in the memory. If the
cursor switch is set to ON after the cursor memory switch
1 has been pressed, the cursor which was stored in the
memory by the cursor memory switch 1 can be called.
= AC outlet circuit-breaker
This is the circuit-breaker for the AC outlet. If the AC
output load is too high and the circuit breaker has been
tripped, reduce the load, and then reset the circuit
breaker by pressing the circuit breaker button.
6 Cursor memory switch 2
If this switch is held down while the cursor switch is ON,
the current cursor status is stored in the memory. If the
cursor switch is set to ON after the cursor memory switch
2 has been pressed, the cursor which was stored in the
memory by the cursor memory switch 2 can be called.
> Power main circuit breaker
This is the main circuit-breaker for the unit's power
supply. If the circuit breaker has been tripped by an
overcurrent or for some other reason, check the cause,
take the appropriate measures to remedy the problem,
and then reset the circuit breaker by pressing the circuit
breaker button.
7 H-POSI control [H-POSI]
This is used to adjust the horizontal position of the
cursor.
? AC OUTLET reset switch
8 V-POSI control [V-POSI]
This cuts off the AC output when it drops below the
minimum voltage that can be supplied. When this has
happened, the outlet can be reset by pressing this reset
switch without turning off the camera's power.
This is used to adjust the vertical position of the cursor.
9 Width control [WIDTH]
This is used to adjust the width of the cursor.
@ AC OUT alarm display
: Height control [HEIGHT]
This lights when the AC output voltage range exceeds 10%.
This is used to adjust the height of the cursor.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and their functions
; 4:3 MARKER switch
E RET B switch [RET B]
This is the 4:3 marker ON/OFF switch. When the 4:3
marker is ON, the brightness modulation can be set to
ON or OFF.
This is used to select the RET B switch. When it is
lighted, the video signals of RET B selected by the
camera are output to the viewfinder.
< 4:3 brightness modulation level control
This is used to vary the brightness modulation level
outside the 4:3 marker.
F User switch [USER SEL]
This enables control to be exercised over the ON/OFF
status of the items selected on the camera’s menus.
= ND filter selector switch [ND]
G VF DETAIL switch [VF DETAIL]
This is used to select the ND filter position. It is effective
This is used to vary the amount of detail to be provided
when the LOCAL switch is held down.
for the viewfinder’s video output.
> ND filter indicators [1 to 5]
H MONITOR output selector switch [MONI SEL]
This is used to select the viewfinder’s video output from
the Y/C, R, G or B camera video signals.
These indicate the positions of the ND filter.
? LOCAL switch [LOCAL]
This is used to enable the ND or CC filter to be selected
I LENS EXT display [EXT]
at the camera.
This lights when the lens extender of the large lens is
ON.
@ CC filter selector switch [ND]
This is used to select the CC filter position. It is effective
J P in P function ON/OFF switch
when the LOCAL switch is held down.
This is used to set the picture-in-picture function on the
viewfinder screen to ON or OFF.
A CC filter indicators [A to E]
These indicate the positions of the CC filter.
K P in P position selector switch
This is used to select the picture-in-picture display
B Menu ON/OFF switch
position on the viewfinder screen.
This is used to set the menu to ON or OFF and display
the status.
L Lens shrinker display [x0.8]
This lights when the shrinker of the large lens is ON.
C Menu JOG switch
This is used to change the menu page and select the
data. For details, refer to the operating instructions of the
multi-format camera (AK-HC931P).
D RET A switch [RET A]
This is used to select the RET A switch. When it is
lighted, the video signals of RET A selected by the
camera are output to the viewfinder.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting methods
Mounting the lens
Mounting the camera
1
Mount the camera on the camera mounting base, and
slide the camera toward the front along the groove until it
clicks into place.
U-shaped groove
Lens guide
R
NAM
/C
G
Y
B
F
I
L
T
E
R
L
O
C
A
L
M
O
N
I
S
E
L
Lens clamp
lever
1
A
CAM
ON
/
ON
V
T
R
G
A
I
N
OUTPUT
W.BAL
L
O
W
C
A
M
B
M
I
D
B
A
R
A
S
T
B
Y
S
A
V
E
H
I
G
H
T
E
S
T
P
R
S
T
S
D
C
A
R
D
PTT
U
S
E
R
S
E
L
Detaching the camera from the camera mounting base
While pushing the red lever, move the black lever in
the direction of the arrow, and slide the camera
toward the back.
Lens#Release
Lens#Lock
Camera mounting base
Lens clamper
Lens lock knob
1
2
Loosen the lens lock knob and turn the lens clamper
counterclockwise until it is horizontal.
Black lever
Red lever
Align the guide pin at the center in the upper part of the
lens back with the U-shaped groove in the front panel,
and mount the lens onto the camera by fitting it onto the
lens guide.
<Note>
If the pin of the camera mounting base fails to return
to its original position after the camera has been
detached, push the red lever again and
simultaneously move the black lever in the direction of
the arrow to return the pin to its original position.
Bear in mind that the camera cannot be mounted if
the pin still remains at the center.
3
Turn the lens clamper clockwise, and tighten up the lens
lock knob.
2
3
4
Lift the camera's lens clamp lever as far as it will go and
keep it at this position.
Pull the front/back slide lock lever of the camera mount
base toward the front, and move the camera to the front.
Insert the camera's bayonet mount by aligning its position
with the mount ring of the lens, and rotate the camera's
lens clamp lever downward to secure it.
<Note>
When the lens and camera positions cannot be aligned
properly, rotate the height adjustment knob of the camera
mount base and align the heights of the lens and
camera. When the knob is rotated clockwise, the camera
moves up; conversely, when it is rotated counterclock-
wise, it moves down.
5
6
Push the front/back slide lock lever of the camera mount
base toward the back to secure the camera.
Connect the camera connection optical fiber cable and
interface cable to the camera.
Down
Up
Front/back slide
lock lever
Front: Release
Back: Lock
Height adjustment
knob
Camera mounting base
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
≥ Connect the multi-format camera (and lens) to the build-up unit as shown in the figure below.
≥ Connect the cable from the CCU to the connector on the build-up unit.
≥ Connect the cable of the build-up unit to the connector on the multi-format camera.
8z LCD viewfinder
R
NAM
/C
G
Y
B
(AK-HVF931P)
FILTER LOCAL MONI SEL
1
A
CAM
/
ON
V
T
R
G
A
I
N
OUTPUT
W.BAL
B
ON
L
O
W
C
A
M
M
I
D
B
A
R
A
S
T
B
Y
S
A
V
E
H
I
G
H
T
E
S
T
P
R
S
T
SD CARD
PTT
U
S
E
R
S
E
L
Multi-format camera
(AK-HC931P)
Cable
Build-up unit
Cable
(AK-HBU931P)
CAMERA NO.
ALARM
R
O
P
O
N
H
E
A
D
O
N
V
F
P
W
SD CARD
AUTO
W
H
I
T
E
B
L
A
C
K
S
E
T
U
P
CLOSE
5600K
BAR
TEST
BLK
CHARACTER
RST
OPT
FAN
CABLE
60Hz
MODE
FLARE
GAMMA
AUTO
KNEE ON
KNEE
OFF
W
H
I
T
E
M
A
T
R
I
X
H
D
.
D
T
L
S
D
.
D
T
L
O
F
F
G
A
M
M
A
O
N
O
F
F
CLIP OFF
ON
OFF
OFF
CONTROL
SHADING
R
WHITE
CLIP
BLK
GAMMA
B
L
A
C
K
W
H
I
T
E
G
B
KNEE
UNDO
FUNC
PED
F
L
A
M
E
G
A
M
M
A
GAIN
HD. DTL SD. DTL MATRIX SYSTEM
FILTER
HEAD
ND
25
CC
4.3
CAP
100
6.3
1.6
1.1
G
6.3
8.0
SCENE FILE
MONITOR
STORE
1
1
2
2
3
3
4
4
5
5
R
B
SEQ
ENC
GAIN
GAIN
G
-
6
-
3
0
3
6
9
12
R
R
B
SHUTTER
BLACK
G
B
ON
VAR
DTL
F
U
L
L
A
U
T
O
PED
IRIS
ACTIVE
ALARM
CALL
IRIS
CABLE
TALLY/CALL
LENS
EXT
OPEN
FUSE
SHORT
ALARM
M-PEDACTIVE
FUSE
X0.8
1
2
5
V
5
A
2
5
0
V
2
.
5
A
PED
SENSE
LEVEL
COXN
PGN
PGN1
PGN2
IRIS
RANGE
OFF
MAIN
HEAD POWER
P
U
S
H
PRIVATE
MIC
ON
OFF
Remote Operation Panel AK-HRP930P
PTT
Camera control unit
(AK-HCU931P)
Remote operation panel
(AK-HRP931P)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
External dimension drawings
FRONT
TALL
CENTER
MARKER
CURSOR
1
VF POWER
Y
ON/OFF
2
RET
A
RET
B
USER SEL
VF MARKER
VF DETAIL MONI SEL
H–POSI
V–POSI
WIDTH
HEIGHT
R
G
Y/G
B
ON
EXT
x0.8
OFF
2
FILTER
LOCAL
MENU SELECT
PIP
1
3
4
5
A
B
C
D
E
ND
CC
23-1/15z (585 mm)
12-5/8z (320 mm)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power supply:
AC 220 V (supplied from CCU)
Power consumption: 8 W (main unit only)
1indicates safety information.
Switch functions:
AC OUT reset, viewfinder power, front tally ON/OFF, CENTER marker, CURSOR,
cursor memory 1, cursor memory 2, 4:3 MARKER, ND filter selection, LOCAL, CC
filter selection, menu ON/OFF, menu JOG, RET A switch, RET B switch, user, VF
DETAIL, MONITOR output selection, P in P function ON/OFF, P in P position
selection
Adjustment functions:
H-POSI, V-POSI, WIDTH, HEIGHT, 4:3 brightness modulation level
32oF to 104oF (0oC to +40oC)
–4oF to 140oF (–20oC to +60oC)
Operating temperature range:
Storage temperature range:
Operating ambient humidity:
Dimensions:
Less than 85%
12-5/8(W)k13-5/16(H)k23-1/16(D) inch (excluding protrusions)
(320k337.5k585 mm)
Weight:
Approx. 31.9 lbs (14.5kg)
Accessories
Operating Instructions (k1)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY
UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
EASTERN ZONE:
One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621
Southeast Region:
1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835
Central Region:
1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200
WESTERN ZONE:
3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500
Government Marketing Department:
52 West Gude Drive, Rockville, MD 20850 (301) 738-3840
Broadcast PARTS INFORMATION & ORDERING:
9:00 a.m. – 5:00 p.m. (EST) (800) 334-4881/24 Hr. Fax (800) 334-4880
Emergency after hour parts orders (800) 334-4881
TECHNICAL SUPPORT:
Emergency 24 Hour Service (800) 222-0741
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010
Panasonic de Mexico S.A. de C.V.
Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico, D.F. (52) 1 951 2127
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
San Gabriel Industrial Park, 65th Infantry Ave., Km. 9.5, Carolina, Puerto Rico 00630 (787) 750-4300
Printed in Japan
VQT0B67
F0902H @3
Download from Www.Somanuals.com. All Manuals Search And Download.
|