Operating and installation instructions
Freezer
F 9052 i (-1)
F 9252 i (-1)
F 9552 i (-1)
en - GB
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 09 290 540
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning the interior and accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Ventilation gaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Before installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Does your old appliance have a different hinging mechanism? . . . . . . . . . . . . . . 35
Stainless steel front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adjusting the door hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Changing the door hinging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Appliance door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Weight of the furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Building into a peninsular run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Fitting a furniture door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
aSafety lock indicator light
bOn/Off button
dTemperature selector buttons
(+ for warmer; – for colder)
eSuper freeze button and indicator
light
cTemperature display
fAlarm off button
aFreezer drawers with
freezer calendar
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Any other usage is not supported by
This appliance complies with all
relevant legal safety requirements.
Improper use can, however, present
a risk of both personal injury and
material damage.
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation of the
appliance.
The appliance can only be used by
people with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, if they are
supervised whilst using it, or have been
shown how to use it in a safe way and
understand the hazards involved.
~
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on the installation,
safety, operation and care of the
appliance.
Safety with children
Keep these instructions in a safe
place and pass them on to any
future user.
This appliance is not a toy! To
~
prevent the risk of injury, do not allow
children to play with it, for example to
play with the controls, to climb inside
the drawers or to swing on the door.
Correct application
Children under 8 years of age must
be kept away from the appliance unless
they are constantly supervised.
This appliance is not designed for
~
~
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
Children 8 years and older may use
~
the appliance only if they have been
shown how to use it in a safe way and
understand the hazards involved.
– Shops
– Offices and showrooms
and by residents in establishments
such as:
– Hostels and guest houses.
The appliance is not intended for
outdoor use.
It must only be used as a domestic
appliance to store deep frozen food, to
freeze fresh food and to prepare ice.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
- air the room in which the appliance is
located for several minutes and
- contact the Service Department for
advice.
Before setting up the appliance,
~
check it for any externally visible
damage. Do not install and use a
damaged appliance.
The more coolant there is in an
~
appliance, the larger the room it should
be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
If the connection cable is faulty it
must only be replaced by a service
technician authorised by the
~
manufacturer to protect the user from
danger.
combustible gases building up.
For every 8 g of coolant at least 1 m3 of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
Safe operation of the appliance is
~
only assured if it has been installed and
connected in accordance with these
operating and installation instructions.
This appliance contains the coolant
~
Before connecting the appliance to
~
Isobutane (R600a), a natural gas which
is environmentally friendly. Although it
is flammable, it does not damage the
ozone layer and does not increase the
greenhouse effect. The use of this
coolant has, however, led to a slight
increase in the noise level of the
appliance. In addition to the noise of
the compressor, you might be able to
hear the coolant flowing around the
system. This is unavoidable, but does
not have any adverse effect on the
performance of the appliance.
the mains supply, make sure that the
rating on the data plate corresponds to
the voltage and frequency of the
household supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
Do not connect the appliance to the
~
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
Care must be taken during the
transportation and setting up of the
appliance that no parts of the cooling
system are damaged. Leaking coolant
can damage the eyes.
In the event of any damage:
- avoid naked flames and anything
which creates a spark,
- disconnect from the mains,
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The electrical safety of this
The appliance must be isolated from
the electricity supply during installation,
maintenance and repair work.
The appliance is only completely
~
~
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national isolated from the electricity supply
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
when:
– it has been switched off at the wall
socket and the plug has been
withdrawn.
– the fuse from the fused spur
connection unit has been withdrawn,
or
– the mains fuse is withdrawn, or the
screw-out fuse is removed (in
countries where this is applicable).
earthing system (e.g. electric shock).
Installation, maintenance and
~
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
This appliance must not be used in
~
a non-stationary location (e.g. on a
ship).
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
When cooling drinks quickly in the
freezer, make sure bottles are not left in
for more than one hour, otherwise they
could burst, resulting in injury or
damage.
~
Never handle frozen food with wet
~
hands. Your hands may freeze to the
frozen food.
Do not take ice cubes out with your
~
Observe the "use by" dates given on
~
bare hands and never place ice cubes
or ice lollies in your mouth straight from
the freezer. The very low temperature of
the frozen ice or lollies can cause frost
burn to the lips and tongue.
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on food
Do not refreeze thawed or partially
thawed food.
Defrosted food should be used up as
~
manufacturer's packaging on storage
conditions required, as well as the “use
quickly as possible, as food soon loses by” date.
it nutritional value and goes off.
Do not use sharp edged objects to
~
– remove frost and ice,
Defrosted food may only be re-frozen
after it has been cooked.
Never store explosive materials in
– separate frozen foods or remove ice
trays.
~
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
They will damage the evaporator,
causing irreversible damage to the
appliance.
Never place electric heaters or
~
candles in the appliance to defrost it.
These can damage the plastic parts.
Do not operate any electrical
~
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparking and explosion.
Do not use defrosting sprays or
~
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
Do not store cans or bottles
~
containing carbonated drinks or liquids
which could freeze in the freezer. The
cans or bottles could explode.
Danger of injury and damage to the
appliance.
Do not use any oils or grease on the
~
door seal, as these will cause the seal
to deteriorate and become porous with
time.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not block the ventilation gaps in
Disposal of your old freezer
~
the plinth or the top of the appliance
housing unit as this would impair the
efficiency of the appliance, increase the
electricity consumption and could
cause damage to the appliance.
Before disposing of an old
appliance, first make the door latch or
lock unusable.
~
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
The appliance is designed for use
~
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
can lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Be careful not to damage any part of
~
the pipework whilst awaiting disposal,
e.g. by
– puncturing the refrigerant channels
int he evaporator, e.g. by
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
Do not use a steam-cleaning
~
appliance to defrost or clean this
appliance. Steam could reach the
electrical components and cause a
short circuit.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
How to save energy
Normal energy
consumption
Increased energy
consumption
Installation site
In a ventilated room.
In an enclosed, unventilated room.
In direct sunlight.
Protected from direct sunlight.
Not near to a heat source (radiator, Near to a heat source (radiator,
oven).
oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).
With a medium setting of 2 to 3.
With a high setting: the lower the
temperature in the compartment, the
higher the energy consumption.
Temperature setting
with a thermostat which
is exact to the degree
(digital display).
Larder section 8 to 12 °C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer than
16 °C .
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18 °C
Wine storage section 10 to 12 °C
Use
Drawers, shelves and racks
arranged as they were when the
appliance was delivered.
Only open the door when necessary Frequent opening of the door for
and for as short a time as possible. long periods will cause a loss of
coldness.
Store food in an organised way.
Searching for an item will mean the
door is open for longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Hot food will cause the compressor
to run for a long time, as the
appliance will have to work harder
to reduce the temperature.
Store food covered or packaged.
The evaporation or condensation of
liquids will cause a loss of coldness
in the refrigerator.
Place frozen food in the refrigerator
to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting
Defrost the freezer section when a A layer of ice hinders the cold from
layer of ice 0.5 cm thick (maximum) reaching the frozen food, and
has built up.
increases energy consumption.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Before using for the first time
Cool pack
Place the cool pack in the top drawer of
the freezer. The cool pack will be at its
Cleaning
^ Clean the inside of the appliance and most effective after it has been in the
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
freezer for approx. 24 hours.
Switching off
^ Press the On/Off button until the
temperature display goes out.
Switching on
The cooling system is switched off. (If
this does not happen, the safety lock is
still activated).
^ Press the On/Off button.
Bars light up in the temperature
display, and the freezer starts cooling.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for a few
hours before placing food in it.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on and off
Safety lock
If you do not do this, the electronics will
switch over to normal operation
automatically after a couple of minutes.
The safety lock can be activated to
prevent the appliance being switched
off inadvertently.
Switching off for longer
periods of time
Activating or deactivating the safety
lock
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ Press and hold the Super freeze
button for approx. 5 seconds.
^ disconnect it from the mains. Switch
off at the wall and withdraw the plug
from the socket, or disconnect the
mains fuse or remove the screw-out
fuse in countries where this is
applicable.
The Super freeze indicator light flashes,
and ; flashes in the temperature
display.
^ Then press the Super freeze button
again.
^ Defrost and clean the appliance, and
^ leave the door ajar to air the
appliance.
; will light up in the display.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.
^ You can now choose between ; 0
and ; 1 by pressing the temperature
selector buttons:
0: the safety lock is de-activated,
1: the safety lock is activated.
^ Press the Super freeze button to save
the setting.
The safety lock indicator light X will
light up when the safety lock has been
activated.
^ Press the On/Off button to come out
of setting mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Setting the temperature
Use the two buttons underneath the
temperature display to set the
temperature for the freezer.
Temperature influences the growth rate Press the
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
To freeze fresh food and to store frozen
+ button: to raise the temperature
food for a long time, a temperature of
-18 °C is required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
(it gets warmer)
– button: to reduce the temperature
(it gets cooler).
temperature rises above -10 °C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked, as the high temperatures
achieved when cooking destroy most
micro-organisms.
The temperature being set will flash in
the display.
When pressing the buttons, the
following information shows in the
display:
– When first pressed, the last
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– Keeping the button pressed in
adjusts the temperature continually.
– if too much food is stored in it at
once,
Approx. 5 seconds after letting go of
the button, the current actual
temperature of the freezer section is
automatically shown.
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still too
high or too low, you will need to adjust it
again.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. If it has
started thawing, check that the food is
safe to use and if it is, use it as quickly
as possible.
Temperature range
The temperature can be adjusted from:
-14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter.
Temperature display
The level of brightness can be
adjusted:
During normal operation, the
temperature display on the control
panel shows the temperature in the
warmest part of the appliance.
If the temperature is not within the
range that the appliance is able to
display (below 0 °C), bars will flash in
the temperature display.
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a ; flashes in the temperature
display.
The temperature display will flash if
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
The correct temperature
^ Press one of the temperature selector
buttons repeatedly until ^ appears in
the display.
^ Press the Super freeze button again.
^ lights up in the display.
^ You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: dimmest setting,
5: brightest setting.
^ Press the Super freeze button to save
the setting.
^ Press the On/Off button to come out
of setting mode.
If you do not do this, the electronics will
switch over to normal operation
automatically after a couple of minutes.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Alarm
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer cannot rise
unnoticed and to avoid energy being
wasted if a door is left open.
Activating the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
Switching the alarm off early
Temperature alarm
Once the set temperature has been
reached in the freezer, the alarm
switches off and the temperature
display stops flashing and lights up
constantly. However, if the noise
disturbs you, you can switch the alarm
off before this if you wish.
An alarm will sound and the
temperature display will flash if the
temperature becomes too warm. The
temperature the appliance is set at
determines the temperature the
appliance recognises as being too
warm.
The alarm will sound and the alarm
indicator light will flash,
– if the freezer door has been left open
for a while, e.g. in order to load,
re-arrange or take food out.
^ Press the Alarm off button.
The alarm will stop. The temperature
display continues to flash until the set
temperature has been reached. The
display then stops flashing and lights
up constantly. The alarm system is
active again.
– when freezing large amounts of food
at once.
– if there has been a lengthy
interruption to the power supply.
Door alarm
If the door has been left open for more
than approx. 60 seconds the alarm will
sound.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Super freeze
Super freeze
Switching off Super freeze
Switch the Super freeze function on
before putting fresh food into the
freezer.
The Super freeze function will switch off
automatically after a minimum of 30
hours and a maximum of 65 hours. The
indicator light will go out and the
appliance will run at normal power
again.
This helps food to freeze quickly and
retain its nutrients, vitamins, flavours
and appearance.
To save energy, the Super freeze
Super freeze is not necessary:
function can be switched off once a
constant temperature of -18°C or
colder has been reached in the freezer.
You should also check the temperature
inside the appliance from time to time.
– when putting in food that is already
frozen.
– when freezing less than 2 kg fresh
food daily.
^ Press the Super freeze button. The
Super freeze indicator light will go
out, and the appliance will continue
to operate at normal power.
Switching on Super freeze
When freezing small quantities of food
in the freezer, the Super freeze function
should be switched on 6 hours before
loading the freezer. When freezing the
maximum load of food the Super
freeze function should be switched on
24 hours before loading the freezer.
^ Press the Super freeze button until
the light comes on.
The appliance works at full power to
lower the temperature in the appliance.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Maximum freezing capacity
Storing frozen food
To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be
exceeded. The maximum freezing
capacity for freezing within a 24-hour
period is given on the data plate:
"Freezing capacity ....kg/24 hrs".
When buying frozen food to store in
your freezer, check
– that the packaging is not damaged,
– the use-by date,
– the temperature at which the frozen
food is being stored in the shop. The
length of time it can be kept is
The maximum freezing capacity given
on the data plate is in accordance with
DIN EN ISO 15502 Standard.
reduced if it has been stored at a
temperature warmer than -18 °C.
^ Buy frozen food once you have
finished the rest of your shopping,
and wrap it in newspaper or use a
cool bag or cool box to transport it.
Freezing fresh food
Fresh food should be frozen as quickly
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.
^ Store it in the freezer as soon as
possible.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
Food which takes a long time to freeze
will lose more water from its cells, which
then shrink.
During the defrosting process, only
some of this water is reabsorbed by the
cells; the rest collects around the food.
If food is frozen quickly, the cells have
less time to lose moisture, so they
shrink less. As there is not so much
moisture loss, it is easier for the food to
reabsorb it during the defrosting
process, and very little water collects
around the defrosted food.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Home freezing
lightly before freezing, but care
should be taken as the taste of some
spices alters when frozen.
Only freeze fresh food which is in a
good condition.
– Do not place hot food or drinks in the
freezer. This causes already frozen
food to thaw, and increases the
energy consumption considerably.
Allow hot food and drinks to cool
down before placing them in the
freezer.
Hints on home freezing
– The following types of food are
suitable for freezing:
Fresh meat, poultry, game, fish,
vegetables, herbs, fresh fruit, dairy
products, pastry, leftovers, egg
yolks, egg whites and a range of
pre-cooked meals.
Packing
^ Freeze food in portions.
– The following types of food are not
suitable for freezing:
Unsuitable packing material
- wrapping paper
- grease-proof paper
- cellophane
- bin bags
- plastic carrier bags
Grapes, lettuce, radishes, sour
cream, mayonnaise, eggs in their
shells, onions, whole raw apples and
pears.
– To retain colour, taste and vitamin C,
vegetables should be blanched after
they have been trimmed and
washed.
Suitable packing material
- plastic freezer film
- freezer bags
- aluminium foil
- freezer containers
To blanch: bring a large saucepan of
water to the boil, immerse the
vegetables in the fast boiling water
for 2-3 minutes, depending on
variety. Remove, and plunge into
ice-cold water to cool quickly. Drain
and pack ready for freezing.
^ Expel as much air as possible from
bags etc. before sealing them, to
prevent freezer-burn on food.
^ Close the packaging tightly with
- rubber bands
- plastic clips
- string or bag ties
- freezer tape.
– Lean meat freezes better than fatty
meat, and can be stored for
considerably longer.
– To prevent chops, steaks, cutlets or
rolled meat from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer film.
Freezer bags may also be sealed
using home heat sealing kits.
– Do not season fresh foods or
blanched vegetables before
freezing. Only season cooked food
^ Make a note of the contents and the
date of freezing on the packaging.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Before placing food in the freezer
– Freezing the maximum amount
(see data plate)
^ When freezing more than 2 kg of
fresh food, switch on the Super
freeze function some time before
placing the food in the freezer (see
"Super freeze").
^ Remove the lower freezer drawers.
^ Place the food flat on the bottom of
the appliance or in contact with the
interior side walls so that it freezes
through to the core as quickly as
possible.
This helps food that is already in the
freezer compartment to stay frozen.
Once frozen:
Placing food in the freezer
^ Place the frozen food in the freezer
drawers and push them back into the
appliance.
The following maximum capacities
must be observed:
– freezer drawer = 25 kg
– glass cold plate = 35 kg
– Large items
If you wish to freeze large items such
as a turkey or game, the glass cold
plates between the drawers can be
removed.
Food to be frozen must on no
account touch food which is already
frozen to avoid partial thawing.
^ Remove the freezer drawers and
carefully lift and slide out the glass
cold plates.
^ Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
– Freezing small amounts of food
Place the food in the lower freezer
drawers.
^ Place the food flat in the bottom of
the drawers so that it freezes through
to the core as quickly as possible.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Freezer calendar
Defrosting
The freezer calendar on the freezer
drawer gives the length of time in
months which various foods can be
stored for effectively.
Frozen food can be defrosted in
different ways:
– in a microwave oven,
– in an oven using the "Fan" or
"Defrost" setting,
Where the storage time given on the
packaging differs, follow the advice on
the packaging.
– at room temperature,
– in the refrigerator (the cold given off
by the frozen food helps to keep
other food cold),
– in a steam oven.
Poultry It is particularly important to
observe food hygiene rules when
defrosting poultry. Do not use the liquid
from defrosted poultry. Pour it away
and wash the container it was in, the
sink and your hands. Danger of
salmonella poisoning.
2-3 months:
Cakes, ice cream, stew
3-5 months:
Fish, mushrooms, bread
Ensure that meat and fish (e.g mince,
chicken, fish fillets) do not come into
contact with other foods while defrosting.
Catch the liquid and dispose of it carefully.
6-8 months:
Pork, veal, poultry
10-12 months:
Beef, fruit, vegetables
Fruit should be defrosted at room
temperature in its packaging, or in a
covered bowl.
Most vegetables can be cooked while
still frozen. Just put straight into boiling
water or hot fat. The cooking time is
slightly less than that of fresh vegetables
due to changes in the cell structure.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Freezing and storing food
Ice cubes
Cool pack
The cool pack prevents the
temperature in the freezer rising too
quickly in the event of a power cut. This
can help to prolong the storage time.
^ Place the cool pack in the top drawer
of the freezer.
^ Fill the ice tray three quarters full with
water, and place it in the bottom of
one of the drawers.
The cool pack will be at its most
effective after it has been in the
freezer for approx. 24 hours.
^ Once frozen, use a blunt instrument,
for example a spoon handle, to
remove the ice tray from the freezer.
In the event of a power cut:
^ Place the frozen cool pack directly on
top of the frozen food in the front of
the top drawer.
^ Ice cubes can be removed easily
from the tray by twisting the tray
gently or by holding it under cold
running water for a short while.
When placing fresh food in the freezer,
use the cool pack to separate the fresh
food from the food which is already
frozen so that the frozen food does not
begin to thaw.
Cooling drinks
Do not store cans or bottles containing
carbonated drinks or liquids which
could freeze in the freezer. The cans or
bottles could explode.
^ The cool pack can also be used in a
cool bag to keep food or drinks cool
for a short period of time.
When cooling non-carbonated drinks
quickly in the freezer, make sure bottles
are not left in for more than one hour,
otherwise they could burst.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting
In normal use, ice and frost will form in
the freezer section, e.g. on the internal
walls. How much ice and frost
accumulates in the appliance will
depend on the following factors:
Do not scrape off ice and frost and
do not not use any sharp edged or
pointed instruments to aid the
defrosting process.
This would damage the evaporator,
causing irreversible damage to the
appliance.
– The appliance door has been
opened frequently or left open for a
while.
– A large quantity of fresh food has
been placed in the freezer at once.
Before defrosting
^ Switch on the Super freeze function
approx.1 day before defrosting to
ensure frozen food retains its cold
reserve for longer when taken out of
the freezer.
– There has been an increase in the
humidity in the room.
Too thick a layer of ice will make it hard
to remove freezer drawers, and in
certain circumstances can prevent the
door from closing properly. Too thick a
layer of ice reduces efficiency and
increases energy consumption.
^ Remove the frozen food from the
freezer and place it in another freezer
or cool box, or wrap it in several
layers of newspaper or cloths and
store in a cool place until the freezer
is ready for use again.
^ The freezer should be defrosted from
time to time. It must be defrosted if a
layer of ice approx. 0.5 cm thick has
accumulated.
^ Remove all the freezer drawers from
the freezer.
The best time to defrost the freezer is
when:
– there is very little food or no food left
in the freezer,
– the humidity level in the room is low
and the ambient temperature in the
room is also low.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting
To defrost
After defrosting
^ Clean the appliance and then dry it
thoroughly.
Carry out the defrosting procedure
as quickly as possible if food has
not been placed in another freezer.
The longer the food is left out at
room temperature, the faster it
defrosts.
^ Close the appliance door.
^ Reconnect to the mains and switch
the appliance back on.
^ Switch on the Super freeze function
so that the appliance can cool down
quickly. The indicator light will come
on.
Do not use a steam-cleaning
appliance to aid the defrosting
process. Steam could reach
electrical components and cause a
short circuit.
^ Once the temperature in the freezer
is sufficiently low, slide the glass cold
plates back into the freezer, then
replace the food in the freezer
drawers and put them back in the
freezer.
Never place electric heaters or
candles etc. inside the appliance to
defrost it. They will damage plastic
parts.
^ When the temperature in the freezer
is a constant -18 °C or colder press
the Super freeze button to switch the
Super freeze function off.
Do not use defrosting sprays or
de-icers as they might contain
substances which could damage
the plastic parts or which could
cause a build-up of gases and pose
a danger to health.
The indicator light will go out.
^ Switch the appliance off.
^ Disconnect the appliance from the
mains.
^ Leave the freezer door open.
To speed up defrosting, two bowls of
hot water (not boiling), with plates
underneath them, can be placed in the
appliance. Closing the door in this
instance will help retain the warmth and
speed up the defrosting process.
^ Use a sponge or towel to soak up the
defrosted water.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Before cleaning
Make sure that water cannot get into
the electronic unit or into the
ventilation gaps.
^ Switch the appliance off.
^ Disconnect the appliance from the
mains.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach electrical
components and cause a short
circuit.
^ Take any frozen food out of the
appliance and store it in a cool place.
^ Take out any removable parts, e.g.
shelves, for cleaning.
^ Defrost the freezer.
The data plate located inside the
appliance must not be removed. It
contains information which is required
in the event of a service call.
Cleaning the interior and
accessories
^ Use lukewarm water with a little
washing-up liquid.
To avoid damaging the surface of
your appliance, do not use:
The ice cube tray (depending on mo-
del) is dishwasher safe.
– cleaning agents containing soda,
ammonia, acids or chlorides,
The temperature of the dishwasher
programme must not exceed 55 °C.
Contact with some foodstuffs, such
as carrots, tomatoes or ketchup can
cause plastic items to discolour.
However, this discolouration will not
affect the stability of plastic items.
– cleaning agents containing
descaling agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
^ Clean the drawers and glass cold
plates by hand. They are not suitable
for cleaning in a dishwasher.
– oven sprays,
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth.
Leave the door open to air the
appliance for a short while.
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– melamine eraser blocks,
– sharp metal scrapers.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Ventilation gaps
^ The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seal
Do not use any oils or grease on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
After cleaning
^ Close the door.
^ Reconnect to the mains and switch
the appliance back on.
^ Switch on the Super freeze function
so that the freezer can cool down
quickly.
The indicator light will come on.
^ Once the temperature in the freezer
is sufficiently low, place the food
back in the freezer drawers and put
them back in the freezer.
^ Switch the Super freeze function off.
The indicator light will then go out.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the door will not open because it
has been opened and closed too
many times in succession.
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Ensure that current is not supplied to
the appliance until after
maintenance or repair work has
been carried out.
This is not a fault. The suction caused
by opening and closing the door is
preventing the door from opening. Wait
a few minutes and then try again. It
should now open without force.
. . . the temperature is too low.
^ Select a warmer temperature.
^ The Super freeze function is still
switched on. The Super freeze
function switches itself off
automatically after approx. 30 - 65
hours.
What to do if . . .
. . . the appliance does not get cool.
. . . the compressor is switching in
too frequently and for too long.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check whether the ventilation gaps in
the plinth and in the housing unit at
the top have been covered over or
become too dusty.
^ Check that the plug is correctly
inserted in the socket and switched
on.
^ The door has been opened too
frequently, or a large amount of fresh
food has been put in at once for
freezing.
^ Check that the mains fuse has not
tripped. If it has, there could be a
fault with the freezer, the household
electricity supply or another
appliance.
^ Check that the door has been closed
properly.
Contact a qualified electrician or the
Miele Service department.
^ Check to see whether a thick layer of
ice has built up in the freezer. If it
has, then the freezer will need
defrosting.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
. . . the compressor runs
continuously.
. . . a bar is lit up or flashing in the
temperature display.
To save energy, the compressor runs at Check the temperature display about 6
a lower speed, but for longer, when
less cooling is required.
hours after switching on the appliance.
Only temperatures within the range the
appliance can display will be shown. If
the temperature is not within this range,
a bar will be displayed instead.
. . . food has frozen together.
Use a blunt instrument, e.g. a spoon
handle or plastic scraper, to prise it
apart carefully.
. . . "F0" to "F9" show in the
temperature display.
. . . . . . there is a thick layer of ice in
the freezer section.
There is a fault. Call the Service
Department.
^ Check whether the door closes
properly.
. . . "nA" appears in the temperature
display.
^ Defrost and then clean the freezer.
The temperature has risen too high at
some point during the last couple of
days because of a power cut.
Too thick a layer of ice reduces
efficiency and increases energy
consumption.
^ Press the alarm button whilst "nA" is
lit up in the display.
. . . the alarm sounds and the
temperature display flashes.
The temperature display will show the
warmest temperature recorded in the
appliance during the power cut.
^ Has the appliance door been open
for longer than 60 seconds?
If this is not the case, then the freezer
temperature has risen above the
temperature set because
Depending on the temperature
displayed, you should check the
condition of food in the freezer. If it has
defrosted or started to defrost, check
that it is still safe to use and if so use it
as soon as possible. Defrosted food
may only be re-frozen after it has been
cooked.
^ the door has been opened too
frequently, or large amounts of fresh
food have been put in at once for
freezing,
^ the ventilation gaps are blocked,
The warmest temperature will show in
the display for about 1 minute. The
actual current temperature in the
freezer section will then show in the
display again.
^ there has been a lengthy interruption
to the power supply.
Once the problem has been resolved
the temperature display will light up
constantly and the alarm will stop.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
At the end of a power cut, the
appliance will start operating again at
the last temperature setting selected.
. . . the Super freeze indicator light
does not light up, even though the
appliance is working.
The indicator light is defective. Call the
Service Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Noises
Normal noises
What causes them
Brrrrr...
Humming noise made by the motor (compressor). This noise can
get louder for brief periods when the motor is switching on.
Blubb, blubb....
Click....
A gurgling noise can be heard when coolant is circulating
through the pipes.
Clicking sounds are made when the thermostat switches the
motor on and off.
Sssrrrrr....
Creak ...
On multi-zone and frost-free appliances you can sometimes just
hear the movement of air circulating inside the appliance.
Creaking sounds can be heard when material inside the
appliance expands.
Remember that the noise of the compressor and the coolant circulating in the
system is unavoidable.
Noises that you can
easily rectify
What causes them, and what can you do about
them
Rattling, vibrating
The appliance is uneven: Realign the appliance using a spirit
level, by raising or lowering the screw feet underneath the
appliance.
The appliance is touching another appliance or piece of
furniture: Move it away.
Drawers, baskets or shelves are unstable or sticking: Check
all removable items and refit them correctly.
Are any bottles or containers unstable or knocking against
each other? Separate them.
The transport cable clips are hanging loose at the back of
the appliance: Remove the clips.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele
(see back cover for contact details).
When contacting your Dealer or Miele,
please quote the model and serial
number of your appliance. This
information is given on the data plate
inside your appliance.
Please note that telephone calls may
be monitored and recorded for
training purposes.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for contact details.
In the U.K. your appliance is
guaranteed for 2 years from the date of
purchase. However, you must activate
your cover by calling 0845 365 6640 or
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs (BS 1363)
All electrical work should be carried out The fuse cover must be re-fitted when
by a suitably qualified and competent changing the fuse, and if the fuse cover
person in strict accordance with current is lost, the plug must not be used until a
local and national safety regulations
(BS 7671 in the UK).
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220-240 V 50 Hz supply.
Please ensure that the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
Connection should be made via a
suitable switched socket which is easily your local electrical supplier.
accessible. For extra safety it is
advisable to protect the appliance with
a suitable residual current device
WARNING
(RCD).
THIS APPLIANCE MUST BE
EARTHED
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
This appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in power could trigger the safety
cut-out mechanism. This could damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices. These
reduce the energy supply to the
appliance which could then become
too warm. Using such devices could
alter the specification of the product.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Climate range
This appliance must be built in,
otherwise it could tip up.
This appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Location
This appliance should be installed in a
dry, well-ventilated room. It should not
be installed where it is exposed to
direct sunlight or directly adjacent to a
heat-producing appliance such as an
oven or a radiator. The room
temperature should not go above or
below the climate range for which the
appliance is designed. The higher the
ambient temperature of the room, the
more energy the appliance requires to
operate.
Climate range
Ambient room
temperature
SN
N
ST
T
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C
Operating in a room which is too cold
will cause the cooling system to switch
off for too long, causing the internal
temperature in the appliance to rise
with the risk of food deteriorating and
going off.
Important: tropical / humid
environments
During periods of high humidity,
some condensation may appear on
outside surfaces of cooling
appliances. This condensation will
disappear when humidity levels
drop. For prevention, it is advisable
to install the appliance with sufficient
ventilation in a dry and/or an
air-conditioned room.
Ventilation
Air at the back of the appliance gets
warm. The appliance housing unit must
be constructed to allow sufficient space
for ventilation.
Air is taken in through the plinth of the
furniture housing unit.
A ventilation gap of at least 38 mm
depth must be provided behind the
appliance for air to circulate.
The cross-sectional area of the
ventilation gaps and also the
cross-sectional area beneath the
ceiling needs to be at least 200 cm2 to
ensure that warm air can be drawn
through without hindrance. Otherwise
the appliance has to work harder,
resulting in an increase in electricity
consumption.
Please ensure that doors are closing
and sealing properly.
Please ensure that the appliance is
installed in accordance with these
installation instructions and that the
handle is fitted correctly. Should you
require further assistance please
contact your Miele customer service
centre.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
Before installing the appliance
^ Before installation remove the cover
strip, sealing strip and other
accessories from inside the
appliance and from the external rear
wall of the appliance.
^ Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Do not remove the spacers from the
back of the appliance. These ensure
the gap required between the back
of the appliance and the wall is
maintained.
Does your old appliance have
a different hinging
mechanism?
If your old appliance had a different
type of hinging, the furniture door can
still be used. Remove the old hinges
from the housing unit. They are no
longer required because the furniture
door is now fitted to the appliance door.
All the necessary parts are supplied or
can be ordered from the Miele Spare
Parts Department.
^ Remove any cable clips from the
back of the appliance.
Stainless steel front
(depending on model)
The old door can be replaced by a
stainless steel front if required.
Miele can advise you on availability.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in dimensions
Niche height [mm]
A
F 9052 i (-1)
F 9252 i (-1)
F 9552 i (-1)
714 - 730
874 - 890
1397 - 1413
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the door hinges
The door hinges are set ex-works to
enable the doors to be opened wide.
However, if the opening angle of the
door needs to be limited for any reason,
the hinges can be adjusted to
accommodate this.
For example, if the appliance door hits
an adjacent wall when opened, the
opening angle can be limited to 90°.
^ Place the locking pins supplied for
limiting the door opening into the
hinges from above.
The door opening angle is now limited
to 90°.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
Before building the appliance in, you
will need to decide on which side the
door is to be hinged. If left hand door
hinging is required, follow the
instructions below.
^ Slide the door outwards and lift it off
e.
^ Unscrew the fixing screws d
completely, and loosely screw them
in at the top and bottom on the
opposite side of the appliance f.
To change the door hinging you will
need the following tools:
If you have put locking pins into the
hinges to stop the door opening too far:
– a cross-slotted screwdriver,
– a screwdriver,
– a selection of Torx screwdrivers,
– a spanner.
Appliance door
^ Remove the locking pins from the top
of the hinges.
^ Open the appliance door.
To remove the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Using a screwdriver, carefully push
tension spring a outwards.
^ Remove covers a, b and c with a
screwdriver.
Warning. The soft-close mechanism
snaps shut when dismantled.
Danger of injury.
^ Loosen fixing screws d at the top
and the bottom slightly.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Unscrew mounting b and pull
soft-close mechanism c downwards
to remove it.
To secure the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Undo ball joint d using a spanner
and remove it.
^ Screw ball joint d of soft-close
mechanism c into the new fixing
holes.
^ Push tension spring a inwards
again.
^ Stand the appliance door up, and
loosen the hinges at the front (the
hinges remain open).
^ Screw mounting b onto the hinge
and tighten securely.
^ Remove screws a, and use the
stoppers supplied c to plug the
empty holes.
^ Open out soft-close mechanism c
and hook it onto ball joint d.
Do not close up the hinges. Danger
of injury.
^ Replace the hinges in their diagonally
opposite corners b.
^ Use a powered screwdriver to secure
the hinges; screws a are
self-tapping.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the door hinging
^ Push the appliance door onto the
pre-fitted screws, and then tighten
the screws.
^ Replace covers a, b and c.
^ Replace the locking pins into the top
of the hinges to prevent the doors
opening too far.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building into a peninsular run
All fitting instructions given are for a
right hand hinged appliance. If you
have converted the appliance to left
hand hinging you will need to adapt
these instructions accordingly.
When built into a peninsular run, the
rear of the building-in niche must be
fitted with a kitchen furniture panel.
Aligning the housing unit
To install the appliance you will need
the following:
– a cross-slotted screwdriver,
– a selection of Torx screwdrivers,
– a hexagon spanner.
Weight of the furniture door
Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted:
Maximum weight of
Appliance
furniture door in kg
The housing unit must be carefully
aligned using a spirit level before
installing the appliance. The unit
corners must be at right angles, as
otherwise the furniture door will not
align correctly with the 4 corners of the
appliance.
F 9052 i (-1)
F 9252 i (-1)
F 9552 i (-1)
20
20
20
Fitting a door which is heavier than
the maximum permitted could
damage the hinges.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Preparing the appliance
^ Open the appliance door.
^ Slide cover strip a into the holder in
the middle of the appliance as
illustrated with the bumps facing
downwards. The bumps will fit into
the keyhole slots.
^ Using a screwdriver, remove cover
c from the top corner of the
appliance.
^ Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^ Fit cover d onto fixing bracket e.
^ Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
^ Secure fixing bracket e to the top of
the appliance with screws f
(M5 x 15).
^ With 16 mm thick furniture walls:
clip spacers b over the hinges.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Building in the appliance
^ Fit cover g onto fixing bracket h.
^ Secure fixing bracket h to the
bottom of the appliance with screws
i (M5 x 15).
^ Carefully remove the protective foil
from sealing strip j.
– With 16 mm thick walls:
The spacers should touch the front
edge at the top and bottom of the
side walls of the housing unit, detail
a.
^ Apply the sealing strip to the side of
the appliance on which the door is
opened so that it is flush with the
front edge of the appliance.
Fit the sealing strip so that it meets
up with the lower edge of top cover
d and then cut the sealing strip
2 - 3 mm above bottom fixing bracket
h.
– With 19 mm thick walls:
The front edges of the top and
bottom hinges sit flush with the front
edge of the housing unit side walls,
detail b.
^ Push the appliance into the niche
until covers d and g touch the front
edge of the side walls of the housing
unit.
^ Make sure that the covers on the top
and bottom fixing brackets sit flush
with the front edges of the housing
unit side walls, detail d.
This will create a gap all round of
42 mm to the front edges of the
housing unit side walls.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
On furniture with door fittings (e.g.
stubs, seals etc) the dimension of
these must be taken into account when
making sure there is a gap all round of
42 mm.
Securing the appliance in the
niche
^ Pull the appliance forwards by the
dimension of the door fitting to keep
the gap at 42 mm all round.
The hinges and the covers will now
protrude by the dimension of the door
fitting.
Tip: Removing the door fittings. This will
ensure that the door is flush with the
surrounding kitchen unit furniture doors.
If the all round gap of 42 mm is not
maintained between the appliance
casing and the front edge of the
housing unit side wall the door may
not shut properly.
This could lead to a build-up of ice
and condensation and also cause
operational faults.
^ Press the appliance against the
housing unit wall on the hinge side.
^ To fix the appliance to the housing
unit at the top and bottom, screw the
long 4 x 20 mm chip board screws a
into the hinges at the top and bottom.
^ Align the appliance height on both
sides by altering the adjustable feet
using the spanner supplied c.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Break off the protruding end of
bottom cover e. It is no longer
required.
^ Fit angled cover g onto bottom fixing
bracket c.
^ Close the appliance door.
Fitting a furniture door
^ Loosen screws b on the top and
bottom fixing brackets c.
^ Press fixing bracket c against the
side wall and tighten screws b.
^ A gap of 8 mm a must be set
between the appliance door and the
central fixing bracket.
^ Attach fixing bracket c to the
housing unit side wall with screws d.
Drill holes in the housing unit side
walls if necessary.
^ Push fitting aids b up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see - on
the diagram).
^ Break off the protruding end of top
cover e, turn the cover around and
fit it on top fixing bracket c.
^ Fit oblong cover f onto top fixing
bracket c.
^ Undo nuts c and take fixing bracket
d off together with the fitting aids.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang the furniture door onto
adjusting bolts h.
^ Loosely attach nuts c on the
adjusting bolts.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Attach the fixing bracket securely
using at least 6 short chipboard
screws e (4 x 14 mm). (On cassette
doors only use 4 screws on the
edges).
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts h with a screwdriver.
^ Pull the fitting aids upwards to
remove them f.
^ Tighten nuts c.
^ Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
Securing the appliance door to the
furniture door:
^ Close the door and align it with
neighbouring furniture doors.
^ Screw fixing bracket a into the
pre-drilled holes in the appliance
door using hexagonal screw b.
Make sure the two metal edges c
are aligned (Symbol II).
^ Whilst counterholding the adjusting
bolts i with a screwdriver, tighten
nuts h on the appliance door.
^ Cover strip j must be completely
hidden in the niche, and must not
protrude.
^ Drill fixing holes d in the furniture
door, and screw in 4 x 14 mm screws
e.
^ Tighten all screws again.
(On large or divided doors, attach a
second pair of fixing brackets a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
– Align depth Z on the furniture door:
Loosen screws f at the top of the
appliance door, and loosen the
hexagon-headed screw g at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
niche.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Building in the appliance
^ Replace all the covers.
To make sure the appliance is
correctly fitted:
– The door must close properly.
– The door must not touch the furniture
carcase.
– The seal at the top edge of the
handle side must fit properly.
To double check place a torch in the
appliance and close the doors. Turn the
lights out in the room. If you can see
any light shining out from the sides
double check the installation.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 4911
M.-Nr. 09 290 540 / 00
F 9052 i (-1), F 9252 i (-1), F 9552 i (-1)
Download from Www.Somanuals.com. All Manuals Search And Download.
|