Operating instructions
Ovens
H 334 B, H 334 B KAT
H 344-2 B
To avoid the risk of accidents
or damage to the appliance it is
essential to read these operating
instructions before it is installed or
used for the first time.
GZWO
M.-Nr. 05 844 950
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
To check and change an entered time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
To delete a time entered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the minute minder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
System lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Baking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Baking chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Roasting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Oven roasting chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Grilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Grill chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
PerfectClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
To remove the oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
To dismantle the oven door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
To refit the door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
To remove the runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
To lower the upper heating element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Extra accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Electrical connection UK, ZA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Electrical connection AUS, NZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Installing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
H 334 B, H 344-2 B
Control panel *
Oven interior
aProgramme selector
bInput dial for entering settings
cDisplay
dFunction dial for selecting oven
functions
eHeating element for top heat and
grilling with roof liner
fAir inlet for fan
gRunner heights 1, 2, 3, 4, 5
hOven door
* depending on model
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
H 334 B KAT
Control panel *
Oven interior
aProgramme selector
bInput dial for entering settings
cDisplay
dFunction dial for selecting oven
functions
eLever for switching the catalyser on
fHeating element for top heat and
grilling with roof liner
gAir inlet for fan
hRunner heights 1, 2, 3, 4, 5
iOven door
* depending on model
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Features
Door contact switch
There is a door contact switch in the
right hand door hinge.
Electronic controls
In addition to operating the various
cooking programmes to bake, roast
and grill, the electronic controls also
offer the following features:
If the door is opened during operation,
the door contact switch causes the
oven heating, and the fan if a "Fan"
setting is being used, to be switched
off.
– Clock display
– Minute minder
This helps reduce the amount of heat
lost from the oven cavity, e.g. when
– Timer to automatically switch cooking basting a roast.
programmes on and off with auto-
matic use made of residual heat
PerfectClean treated surfaces
– Programme lock, to prevent
unintentional altering of programme
settings
The following surfaces are all treated
with PerfectClean enamelling.
– Oven interior
– Runners
– System lock, to prevent the
appliance being used unintentionally – Baking tray
– Grill pan
– Anti-splash tray
– Safety cut-out
– Rack
Cooling system
PerfectClean enamelled surfaces have
As soon as the oven is switched on a
cooling fan is automatically engaged.
The cooling fan mixes hot air from the
oven cavity with cool room air before
venting it out into the kitchen through
vents located between the appliance
door and the control panel.
very good anti-stick properties and are
much easier to keep clean than
conventional enamel, if cleaned
regularly.
See "Cleaning and care" for more
information.
The controls and door handle will get
slightly warm. They are quite safe to
touch.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit. When the
temperature in the oven has fallen
sufficiently the cooling fan will switch off
automatically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Catalytic enamelled surfaces
Accessories
The back panel, roof liner and side
liners (if fitted) are coated with dark
grey catalytic enamel. Soiling from oil
and fat is burnt off these surfaces when
very high temperatures are used in the
oven.
The following accessories are supplied
with this oven.
These and other accessories are also
available to order from the Miele Spare
Parts Dept. or your Miele Dealer. See
"Extra Accessories" further on in this
booklet for more details.
This makes it easier to clean
inaccessible areas of the oven.
See "Cleaning and care" for more
information.
Baking tray, grill pan and rack
The baking tray, grill pan and rack are
fitted with non-tip safety notches which
prevent them being pulled right out
when they only need to be partially
pulled out.
Catalyser
Depending on model a catalyser is
fitted into the oven’s ventilation system.
It filters fat from the escaping vapours
and thus reduces cooking smells.
Energy efficiency rating
according to EN 50304
H 334 B, H 344-2 B
These appliances are rated energy
efficiency class B in accordance with
EN 50304. Tests were carried out using
the "Fan" oven function.
When pushing the tray, pan and rack
back in, always ensure that the
safety notches are at the rear of the
oven (see illustration).
H 334 B KAT
These appliances are rated energy
efficiency class B in accordance with
EN 50304. Tests were carried out using
the "Fan" oven function with the
catalyser switched off.
The tray, pan and rack can then only be
taken out of the oven by raising them
upwards and then pulling out.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the appliance
Roasting filter
The roasting filter must be fitted in front
of the fan when cooking anything fatty
or where food is likely to splatter, e.g.
when open roasting or grilling meat.
The droplets of fat caught up in the
circulating air are deposited on the
roasting filter. This helps to keep the
oven and the area behind the interior
back panel cleaner.
Do not use the roasting filter when
baking. This would increase the
times needed for baking and give
uneven browning results.
See "Extra accessories" for a
description and illustration of the
handle and anti-splash tray.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Old appliances contain materials which
can be reclaimed or recycled. Please
contact your dealer, your local waste
collection centre or scrap merchant
about potential recycling schemes.
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Ensure that the appliance presents no
danger to children while being stored
for disposal.
Ensure that any plastic wrappings,
bags etc. are disposed safely and kept
out of the reach of babies and young
children. Danger of suffocation!
See the appropriate section in the
Warning and safety instructions.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
This appliance conforms to current
safety requirements. Incorrect use
can, however, lead to personal injury
and damage to the appliance.
Before connecting the appliance to
the mains supply make sure that
the voltage and frequency correspond
to the rating on the data plate,
otherwise the appliance could be
damaged.
Before installation and before using
for the first time, read the operating
instructions carefully.
Consult a competent person if in doubt.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system, which complies with local and
national safety regulations. It is most
important that this basic safety
requirement is tested regularly, and if
there is any doubt the household wiring
system should be inspected by a
qualified electrician.
They contain important notes on
installation, safety, operation and
care of the appliance. This way you
will avoid the risk of accidents and
damage to the appliance.
Keep these instructions in a safe
place and pass them on to any
future user.
The manufacturer cannot be held
responsible for the consequences of an
inadequate earthing system (e.g.
electric shock).
Correct usage
The appliance is intended for
domestic use to cook food, and in
particular to bake, roast, defrost, cook,
dry fruit etc, and to grill.
Any other usage is at the owner’s risk
and could be dangerous. The
manufacturer cannot be held liable for
damage caused by incorrect or
improper use of the appliance.
The appliance must be built in
before operation to ensure that no
electrical components are accessible.
Never open the housing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
Do not let children access the
appliance or its controls. Supervise
its use by the elderly or infirm. If
allowing older children to use the
appliance without supervision please
ensure that they are aware of how the
oven works and understand the
dangers of improper use.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Installation work and repairs may
Use
only be carried out by suitably
qualified and competent persons in
accordance with local and national
safety regulations.
Caution, danger of burning.
High temperatures are produced by
the oven.
Repairs and other work by unqualified
persons could be dangerous and the
manufacturer will not be held liable.
Great care should be taken to
ensure that small children do not
touch the appliance when it is being
used. Children’s skin is far more
sensitive to high temperatures than that
of adults.
The appliance is only completely
isolated from the electricity supply
when:
External parts of the oven such as the
door glass, handle vent and control
panel can become quite hot.
– the mains fuse is withdrawn
– or the screw-out fuse is removed (in
countries where this is applicable)
Children should not be left alone or
unattended in an area where an
oven is in use. They should never be
allowed to sit or stand on any part of
the oven or play with it.
Do not store items of interest to children
in cabinets above an oven. Children
climbing on to the oven to reach these
items could be seriously injured.
– it is switched off at the wall socket.
On appliances fitted with a plug
make sure you pull only on the plug
and not on the cable when
disconnecting from the mains.
Ensure that current is not supplied to
the appliance while maintenance or
repair work is being carried out.
Use of heat-resistant oven gloves
is recommended when placing
food in the oven, turning or removing it.
Do not connect the appliance to
the mains electricity supply by an
extension lead.
Extension leads do not guarantee the
required safety of the appliance, (e.g.
danger of overheating).
When working with "Conventional"
heating or when grilling, the element in
the roof of the oven gets very hot, and
there is a danger of being burnt.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
When cleaning the roof of the oven
wait until the grill element has
cooled down before lowering it. Danger
of burning.
Do not use force to pull it down as
this can cause the element to
break.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not use plastic containers.
These melt at high temperatures
and could damage the appliance.
If food is left in the oven after
cooking, e.g. to take advantage of
the residual heat, turn the temperature
selector to the lowest setting. Leave the
function selector at the position set.
Do not switch the appliance off until the
food has been removed.
Do not heat up unopened tins or
jars of food in the oven. Pressure
can build up and they may explode.
This could result in injury or damage.
Moisture in the oven could lead to
Do not push pots and pans around condensation forming on the control
on the oven floor as this could
damage the surface.
panel and surrounding kitchen furniture
and drops of moisture collecting under
the worktop.
Condensation can:
- damage the housing unit / worktop.
- lead to moisture damage in the oven.
Do not lean or sit on an open oven
door, or place heavy items on it.
This could damage the appliance. The
oven door can support a maximum load
of 15 kg.
On models fitted with a catalyser it
could also result in deposits remaining
in the catalyser, causing an unpleasant
smell to arise the next time the
Make sure that nothing gets
trapped between the door and the
oven.
appliance is switched on.
Cover any food which is left in the
oven to be kept hot. Any moisture
in the food could lead to corrosion
damage in the oven. This also prevents
the food from drying out.
Bake larger deep-frozen items
such as pizzas on baking paper on
the rack itself or in the pizza pan (see
"Extra accessories"). Placing them on
the baking tray or in the grill pan can
cause the metal to distort. This
distortion would increase with
subsequent use.
Deep frozen foods such as oven chips
or potato croquettes can be cooked on
the baking tray or grill pan.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Never add water to food on a hot
General notes
Never leave the appliance
unattended when cooking with oil
or fats as these are a fire hazard if
overheated.
baking tray or grill pan or directly
onto food in a hot oven. The steam
created could cause serious burns or
scalding and the sudden change in
temperature can damage the enamel.
Do not use the oven to heat up the
room. Due to the high temperatures
radiated, objects left near the oven
could catch fire.
Never line the floor of the oven with
aluminium foil when using
Conventional heat A/Bottom heat B.
Do not place a dish, tin, baking tray or
grill pan on the floor of the oven.
Always ensure that food is
sufficiently cooked or reheated.
Many factors will affect the overall
cooking time, including the size and
amount of food, its temperature,
changes to the recipe and the shape
and size of cooking container.
If using a grill pan made by a different
manufacturer make sure that there is a
gap of at least 6 cm between the
bottom of the pan and the floor of the
oven.
If these instructions are not observed
the bottom heat will be blocked. This
can cause permanent damage to the
floor of the oven.
Some foods may contain micro
organisms which are only destroyed by
thorough cooking at temperatures over
70°C C for a minimum of 10 minutes.
When cooking or reheating foods e.g.
poultry it is particulary important that
food is fully cooked through. If in doubt
select a longer cooking or reheating
time.
It is important that the heat is allowed to
spread evenly throughout the food
being cooked. This can be achieved by
stirring and/or turning the food, and by
observing a sufficiently long standing
time which should be added to the time
needed for cooking, reheating or
defrosting.
Protective aluminium foil panels are
available in retail outlets which are
supposed to protect the oven cavity
from soiling and reduce the need for
cleaning. If used cooking and baking
times will increase considerably.
They can also cause damage to the
appliance (e.g. by blocking the heat).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
When using kitchen appliances
connected to sockets near the
oven, ensure that the cable cannot get
trapped in a hot oven door, which could
melt the cable insulation and be
Disposal of your old appliance
Before throwing an old appliance
away it must first be made
unusable. Switch off and disconnect it
from the power supply, cut off the cable
directly behind the appliance and
render any plug useless. This should
be done by a competent person.
dangerous. Danger of electric shock.
Never use steam cleaning
apparatus to clean the appliance.
The steam could attack the electrical
components and cause a short circuit.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
If using alcohol in your recipes
high temperatures can cause the
alcohol to vaporise and under adverse
circumstances the alcohol can catch
light on the hot heating elements.
Alcohol should be burnt off before the
dish is placed in the oven to avoid this
danger.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the appliance guarantee.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
After installation and before using the
oven for the first time:
The following will appear in the display:
– The m symbol (time of day),
– Set the clock.
– "12:00" and the triangle V flashing
– Switch the catalyser on, if fitted.
– Clean the appliance.
underneath the m symbol.
– Heat the oven up with nothing in it.
New appliances have a slight smell
on first use and this procedure will
dissipate the smells before you use
the oven to cook any food.
To save energy the display will go
dark a few seconds after setting the
time.
The time continues to run unseen in
the background.
The time can also be set to show
constantly in the display. See "To
show the time display all the time".
^ Use the (–/+) input dial to set the
time.
The clock has a 24 hour display.
When the time has been entered, the
display goes dark and the clock
advances minute by minute in the
background.
The time will appear again in the
display as soon as you move the
function selector.
Setting the clock
The time can only be entered when
the programme selector is at "0".
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Changing the time of day
In the following example the time of day
is changed from 12:05 to 13:33.
To do this:
^ Whilst triangle V is flashing, turn the
(–/+) input dial clockwise until the
required time shows in the display.
^ Turn the programme selector to "0".
The m symbol will go out after a couple
of seconds and the time set stored in
memory.
If the display is set to show the time, the
time of day will then show in the
display.
^ Turn the function selector (right hand
dial) until triangle V is underneath
the m symbol in the display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To show the time display all
the time
^ Now turn the (–/+) input dial
clockwise.
The time of day will show in the display.
^ Turn the programme selector to "0".
^ Turn the programme selector to the
Light H position.
The time of day will show in the display.
The time of day now shows constantly
in the display.
To switch off the time of day display
^ Turn the programme selector to the
Light H position.
^ Turn the function selector (right hand
dial) until triangle V is underneath
the m symbol in the display.
^ Now turn the (–/+) input dial
anti-clockwise.
^ Turn the function selector (right hand
dial) until triangle V is underneath
the m symbol in the display.
Four horizontal bars will then appear in
the display.
^ Turn the programme selector to "0".
The display will go dark and the time
will continue unseen in the background.
Four horizontal bars will then appear in
the display.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Switching on the catalyser
Cleaning and heating up for
the first time
Some appliances have a catalyser
built-in to the ventilation system.
When switched on, the catalyser
removes fat particles from the air
circulating in the oven and also
reduces cooking smells.
Before using the appliance heat it up
once with nothing in it. New
appliances have a slight smell on first
use and this procedure will dissipate
the smells before you use the oven to
cook any food.
The oven is delivered with the catalyser
switched off (standard factory setting).
Before use please remove
– any stickers from the floor of the
oven, baking trays, grill pan etc.
– any cork spacers at the sides
above the oven cavity.
^ Wipe out the oven interior using
warm water and a little washing up
liquid. Polish dry with a soft cloth.
Do not close the oven door until the
oven interior is dry.
^ To switch the catalyser on, please
push the lever located underneath
the control panel to the right to
position "I".
^ Rinse the accessories.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Then run the oven for at least 1 hour at
a high temperature. To do this:
^ Whilst the triangle V is flashing
underneath the U symbol, use the
(–/+) input dial to set the temperature
to its highest setting (250 °C).
^ Turn the programme selector to the
Fan D position.
Once this setting has been accepted
– the oven heating will switch on,
– and the actual temperature in the
oven will show in the display.
The timer can also be used to set the
finish time (see "Switching off
automatically").
The suggested temperature of 160 °C
appears in the display.
Please ensure the room is well
ventilated during this operation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
The oven controls consist of:
Display
– the Programme selector, for
selecting oven functions with, e.g.
Lighting H, Fan D, Automatic
roasting E, ...
– the V Function dial, for selecting
oven functions which require input
e.g. the time of day m, cooking
durations g, ...
The bottom line shows the symbols of
functions where data can be changed.
To highlight these functions turn the
function dial (V).
– the (–/+) Input dial, for entering and
changing settings on the oven
function selected with the Function
dial,
The triangle V will appear in the
display underneath the symbol of the
function you have selected.
– the Display, where all changes and
The top line shows:
settings are visible.
– the time (time of day or a
programmed cooking time).
Programme selector
– the oven temperature together with
the p or U symbol.
– the key symbol 0--§ will appear if
e.g. the programme selector is
turned when the system lock is
engaged or a cooking programme
has been locked using the
programme lock.
– EC for Residual heat being utilised.
Use the programme selector to select
the required programme.
Night dimming
Between the hours of 22:00 and 6:00
the lighting in the clock / timer display
is dimmed automatically.
The programme selector can be turned
clockwise or anti-clockwise.
The display will appear dimmer during
this period if the time of day is set to be
on all the time.
Turning the Function or Input dial
during this period will bring the timer
display back on in full brightness.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Rotary dials
Whilst the V is flashing, use the
(–/+) Input dial immediately to make
any changes:
– Turning it clockwise, increases the
value shown or engages the
function,
– Turning it anti-clockwise, reduces
the value or switches the function off.
Triangle V will flash for approx. 5
secs.
Settings can only be changed whilst
it is flashing.
If this input period has elapsed you
will have to use the function dial to
re-select the function.
Use the V Function dial, for selecting
oven functions which require input e.g.
the time of day.
The V Function dial can be turned
clockwise or anti-clockwise.
To select a function, turn the function
dial until triangle V is underneath the
symbol in the display of the function
you wish to make changes to.
See chart for an overview of symbols in
the display and their settings.
The display will change at a different
rate depending on how quickly the dial
is turned:
If triangle V
– is flashing, alterations can be made
to the settings of the function
selected.
– in one minute increments
– in 10 minute increments or
– hour by hour.
– is lit up, the function will be
displayed, but changes cannot be
made to it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Display – functions and symbols
The position of the programme selector affects the settings available using the
function dial.
This chart gives an overview of these settings.
Function
symbol
Programme selector position
Position "0"
Light H
Function
m
Change the time of
day
Switch the time of
day on/off in the
display
–
l
a
p
Input minute minder Input minute minder Input minute minder
time (egg timer)
time (egg timer)
time (egg timer)
Activate/de-activate
system lock
–
Lock a cooking
programme
–
–
–
Change the oven
temperature
U
–
Switch Rapid heat
up off (only with Fan
heat D, Automatic
roasting E,
Conventional heating
A)
f
g
)
–
–
–
–
–
–
Enter start time
Enter duration
Enter end time
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming sequence
To change a setting on the oven:
^ Turn the programme selector to the
required position.
^ Turn the function dial clockwise or
anti-clockwise until triangle V is
underneath the required symbol in
the display.
^ Whilst triangle V is flashing, use
the (–/+) Input dial immediately to
make any changes.
Temperatures, times and other func-
tions are controlled using two rotary
dials:
The triangle will flash for appox.
5 seconds. If this input period has
elapsed you will have to use the
function dial to re-select the function.
– Input dial (–/+)
– Function dial (V).
The display will show what these dials
are set to.
This principle applies whenever you
change a setting.
See "Changing the time of day" and
"Using the oven" for examples which
explain this principle in detail.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the oven systems
Fan Heat D
is required and a deep colour and good
rise are needed.
This system works by the circulation of
heated air.
It is usually necessary to pre-heat the
oven when using this method.
A fan situated on the back wall of the
oven sucks in the air, heats it over a
ring element and blows the heated air
through the carefully spaced openings
in the rear panel of the oven, enabling
approx. 20 °C lower temperatures to be
used than with the Conventional
heating system.
Grill n
This will glow red a few minutes after
switching it on and is then ready for
use.
The grill element is thermostatically
controlled and at times during grilling
will not glow red. This is quite normal.
The oven does not usually need to be
pre-heated as the heated air reaches
the food straight away.
Pre-heat the grill for at least 5 minutes
with the door shut before grilling.
Exception: Pre-heating may be
necessary for foods which cook in less
than 20 minutes and for foods such as
puff pastry and yeast mixtures where
instant heat is required to make them
rise quickly.
Fan Grill N
The hot air from the grill is distributed
over the food by the fan on the rear wall
of the oven. This enables a lower
temperature to be selected than for
conventional grilling.
The grill element is thermostatically
controlled and at times during grilling
will not glow red. This is quite normal.
Using the fan heating system you can
bake and roast on different levels at the
same time.
Auto Roast E
Pre-heat the grill for at least 5 minutes
with the door shut before grilling.
The oven heats initially to a high
temperature (230 °C) which seals the
meat to keep it succulent and tasty. As
soon as this temperature has been
reached, the oven temperature
automatically drops back down to the
pre-selected setting.
More practical advice about these
cooking functions is given in the
"Baking", "Roasting" and "Grilling"
sections of this book and in the
Miele cookbook supplied with this
oven.
Conventional heating A
With the conventional method of
heating, radiant heat is directed onto
the food from above and below. It is
useful where a fairly long cooking time
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven
A programme must first be selected
using the Programme selector and
then, if necessry, the temperature
changed.
– Light H
Turns on the oven light
independently.
– Fan Heat D
The programmes on this oven have
pre-set recommended temperatures to
simplify operation.
For baking or roasting on several
levels at the same time.
– Auto Roast E
Initial high temperature to seal meat
followed by normal roasting
temperature.
Selecting an oven setting
Not suitable for baking,
except for baking freshly prepared
wholemeal or rye doughs, (not
packet mixes).
– Conventional A
Top and bottom heat together for
long, slow baking of traditional
recipes, e.g. fruit cake, casseroles.
– Bottom heat B
^ Turn the programme dial clockwise or
anti-clockwise to the required
programme position.
Use this setting towards the end of
baking, to brown the base of a cake,
quiche or pizza.
When you do this the symbols of any
functions which are available in this
setting will light up in the display.
– Fan Grill N
For grilling thick cuts, e.g. rolled
meat, poultry.
Grill with the oven door closed.
– Grill n
For grilling fish and cuts such as
chops, steaks, poultry pieces, and
kebabs.
Grill with the oven door closed.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven
Selecting a temperature
The following temperatures are set at
the factory:
Fan D. . . . . . . . . . . . . . . . . . . . . 160 °C
Auto Roast E *. . . . . . . . . . . . . 160 °C
Conventional A . . . . . . . . . . . . . 190 °C
Bottom heat B . . . . . . . . . . . . . . 190 °C
Fan grill N . . . . . . . . . . . . . . . . 200 °C
Grill n. . . . . . . . . . . . . . . . . . . . . 240 °C
As soon as the programme selector is
turned to a setting the following will
appear in the display
* The initial boosted temperature is
approx. 230 °C, which then drops
down to 160 °C for continued
roasting.
– the recommended pre-set
temperature,
– the symbols of any function that can
be altered from this programme
selector position.
Altering the temperature
If the temperature recommended by the
system is not suitable, it can be altered
according to oven function within the
following range:
If you are happy with the recommended
pre-set temperature, the display will
change a few seconds later to show
this as the target temperature.
The oven starts to heat up.
Fan D . . . . . . . . . . . . . . . . . 30 – 250 °C
Auto Roast E . . . . . . . . . 100 – 230 °C
Conventional A . . . . . . . . . 30 – 280 °C
Bottom heat B . . . . . . . . . 100 – 250 °C
Fan grill N . . . . . . . . . . . . 50 – 260 °C
Grill n. . . . . . . . . . . . . . . . 200 – 300 °C
The display will then change to show
the actual temperature in the oven,
and depending on which programme is
being used the symbol p or U will also
show.
To do this:
The increase of temperature can be
followed in the display until the target
temperature is reached.
^ Using the (+/–) input dial enter the
required temperature.
If you have already entered times for
an automatic programme, you will
first have to call up the p or U
symbol on the display before you
can alter the temperature.
If the door is opened or the target
temperature reduced during cooking,
the actual temperature will also go
down in the display.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven
Using the oven
Below is an example of setting a simple
programme.
To bake a cake using Fan D, 150 °C.
^ Place the cake in the oven and close
the door.
^ As soon as triangle V starts to flash
underneath the temperature symbol,
use the (–/+) input dial to reduce the
temperature to 150°.
^ Turn the programme selector to the
Fan D position.
Once this setting has been accepted
The following will appear in the display:
– the actual temperature in the oven
will be displayed,
– and the oven heating will switch on,
– together with the cooling fan.
Take the cake out of the oven when it is
ready.
– the recommended pre-set
temperature of 160° C,
^ Turn the programme selector to "0".
– the symbols of any function that can
be altered from this programme
selector position.
The cooling fan will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit. When
the temperature in the oven has fallen
sufficiently the cooling fan will switch off
automatically. The oven will cool down
faster if the door is left partially or fully
open.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven
Rapid heat-up
To switch off "rapid heat-up"
With the following programmes:
– Fan Heat D
Rapid heat-up should not be used for
some items such as pizza, biscuits and
small cakes because they will brown
too quickly from the top.
– Auto Roast E
– Conventional A
To switch it off:
either the top element or the fan
element will come on during the heating
up phase to enable the oven to reach
the required temperature as quickly as
possible.
^ Call up the U symbol.
^ Reduce the temperature to 100 °C.
The arrow next to the p symbol will go
out.
^ Re-set the temperature to the setting
you want.
"Rapid heat-up" is now switched off for
this particular cooking process.
"Rapid heat-up" is available for the next
programme once the oven function
selector has been turned to "0" at the
end of the programme.
Food which browns quickly should not
be placed at the top of the oven when
rapid heat up is being used.
The symbol U in the top line of the
display indicates that Rapid heat-up is
switched on.
The p symbol will appear in the display
for all programmes which do not have
rapid heat-up.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven
Pre-heating the oven
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating-up
phase.
It is only necessary to pre-heat the oven
in certain instances.
With Fan heat D
for foods which cook in less than
20 minutes and for foods such as puff
pastries and yeast mixtures where
instant heat is required to make them
rise quickly.
With Conventional heating A
pre-heat the oven where a fairly long
cooking time is required and a deep
colour and a good rise are needed.
Rapid heat-up during the
pre-heating phase should be
switched off when baking pizza and
delicate items such as biscuits and
small cakes. Otherwise they will get
brown too quickly.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
You can set the oven to switch itself off
automatically or to switch itself on and
off automatically when baking and
roasting.
Start time f
First select the appropriate symbol:
Duration g
Select the f symbol to specify the
time you want cooking to start. The
oven will start heating up as soon as
this time is reached.
End time )
Select the g symbol to enter the
duration of a cooking programme.
Once the time set has elapsed, the
oven will switch itself off automatically.
The maximum length of time which can
be set is 12:00 hours.
Select the ) symbol to specify the
time you want the oven to switch itself
off automatically.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
Symbols in the display
To switch a programme on and off
automatically there are several ways of
entering the times:
In addition to the m and p symbols the
symbols representing the duration, start
and finish time are also displayed
constantly if times have been entered
for a cooking programme.
– Duration g and End time )
– Start time f and duration g
– Start time f and End time )
If you have only entered the duration
(e. g. 1 1/2 h) , the display will show:
The time which has not been entered is
calculated automatically.
The p and m symbols will show in the
display together with the symbols
representing times entered e.g.
Duration and End time:
– The actual temperature,
– the p, m and g symbols.
The triangle V underneath the g
symbol indicates that a programme
duration is being displayed. The time
will count down in the display.
The triangle V underneath the symbol
indicates the last time that was entered.
To view the required temperature or the
time of day in the display you will have
to use the function dial to move the
triangle V underneath the respective
symbol.
To see the other times entered move
the triangle under the respective
symbol.
As soon as the function dial is turned all
functions which can be called up or
altered are displayed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
Whilst a programme is running the
following show in the display
At the end of cooking time
– an audible tone sounds for approx.
5 seconds.
– The ) symbol flashes,
– The cooling fan will continue running
until the temperature in the oven has
fallen sufficiently.
– The actual temperature and
– Duration or End time
Both the audible tone and the visual
display can be cancelled by:
Shortly before the end of cooking time
the oven heating switches off
automatically.
– Turning the function dial.
If the food is not cooked to your
taste, a new cooking time can be
entered.
The Residual heat function then comes
into action.
– Turning the programme selector to
"0".
If the audible tone is not switched off it
will continue to sound at 5 minute
intervals as a reminder that cooking
time has finished. This reminder
continues for up to an hour.
"EC" now appears in the oven display
instead of the actual oven temperature
to show that the oven is in energy save
mode.
The oven heating will switch on again if:
– The required temperature is altered.
– The cooking time is lengthened
significantly.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
Switching the cooking process
off automatically
To switch a programme off
automatically a duration has to be
entered. The following example shows
the programming for baking a cake
using Fan Heat D/160 °C, 45 minutes.
^ Place the cake tin in the oven and
close the door.
^ Enter the duration in Hours:Minutes
by turning the (–/+) input dial (left
hand dial).
^ Select a function and temperature.
After entering the data
– the temperature rise can be followed
in the display,
^ Call up the g symbol for duration by
turning the function dial (right hand
dial) until the triangle is underneath
the middle arrow.
– as well as the duration counting
down, if no other functions are called
up.
Once the time set has elapsed, the
oven will switch itself off automatically.
"0:00" and the actual temperature in the
oven (e.g. 23 °C) will appear in the
display.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
Switching on and off
automatically
Now set the End time :
^ Call up the ) symbol for End time.
It is a good idea to set the oven to
switch on and off automatically when
roasting.
When baking the oven should not be
set to start a long time off. The batter or
dough will dry out and the raising
agents will lose their effectiveness.
The time of day plus the cooking time
entered appear in the display (9:05 +
1:30 = 10:35).
See the following example for an
explanation of how to do this.
The time is 9:05. A roast needs 1 1/2 h
using Auto Roast E at 160 °C and
should be ready at 13:15.
^ Enter the end time (13:15) in
Hours:Minutes.
^ Place the roast in the oven and close
the door.
^ Select Auto Roast and set a
temperature.
Once this setting has been accepted
First enter the duration :
– the oven heating and cooling fan
switch off,
^ Call up the g symbol for duration.
"0:00" and the actual temperature in the
oven (e.g. 23 °C) will appear in the
display.
– the g and ) symbols indicate that
a programme has been set.
^ Enter the duration (1 1/2 h) in
Hours:Minutes.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming cooking times
Using the residual heat,
Energy-save function
If you have entered times for a cooking
programme, the oven heating will
switch off shortly before the end of the
time set.
The residual heat in the oven is
sufficient to complete the cooking
process.
A Start time (11:45) will show in the
display, when you call up the f
symbol.
The oven will start heating up at this
time and the duration will then be
displayed.
Using the residual heat in the oven
saves energy.
Once the time set has elapsed, the
oven will switch itself off automatically.
Please note the following:
In addition to the options given, you
can also enter the beginning and end,
or just the end, using the appropriate
symbols.
"EC" will appear in the display to show
that the oven is in energy save mode.
The cooling fan continues to run, as
does the hot air fan if a "fan" setting was
chosen.
To check and change an
entered time
It is possible to check or change times
entered for a cooking process, at any
time by calling up the relevant symbol.
To delete a time entered
^ Turn the programme selector to "0".
If there is a power cut all data entered
will be deleted.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the minute minder
The minute minder can be used to time At the end of the set time
any activity in the kitchen, e.g. boiling
eggs. (It cannot be used to switch the
oven off at the end of a set time).
– an audible tone sounds for approx.
5 seconds.
– At the same time the l symbol
You can enter a time up to a maximum
of 12 hours.
flashes for approx. 1 minute.
You can set the minute minder at the
same time as another timed
programme, e.g. as a reminder to baste
your roast or add seasoning etc.
To cancel the minute minder:
^ Select the l symbol again. Make
sure the triangle underneath the
symbol is flashing.
To enter or change a time:
^ Use the input dial to set the time
back to "0:00".
^ Use the function dial to select the l
symbol (minute minder).
"0:00" appears in the display.
^ Enter the duration in Hours:Minutes.
The time then counts down in minutes.
The l symbol continues to be visible
as a reminder that the minute minder is
working.
As long as the l symbol is selected
the minute minder time will be visible
counting down in the display.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
System lock
The system lock prevents the oven
being switched on unintentionally, by
children for example.
again as a reminder that the system
lock is active.
The system lock remains active even
after a power cut.
To activate the system lock
To cancel the system lock
^ Turn the programme selector to "0".
^ Call up the a symbol.
Please ensure that the function
selector is at "0".
If it is pointing to the oven interior
lighting H position, the showroom
demo mode will be activated instead
of the system lock. The oven can be
operated as normal, but it will not
heat up.
A key symbol 0--§ will appear in the
display.
^ Now turn the (–/+) input dial
anti-clockwise.
^ Turn the programme selector to "0".
The system lock is de-activated when
the four horizontal bars appear in the
display.
^ Call up the a symbol.
Four horizontal bars will appear in the
display.
^ Turn the (–/+) input dial clockwise.
A key symbol 0--§ will appear in the
display.
The oven can now not be switched on.
The key symbol 0--§ will go out after a
short time.
If the programme selector is moved
again the key symbol 0--§ will appear
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety lock
A cooking programme can be "locked"
to prevent anyone changing the
settings.
The cooking programme will be
interrupted, if
– the programme selector is not turned
back to the original programme
setting within 10 seconds.
Engaging the safety lock
^ Select the programme and set a
temperature. If necessary set the
cooking time.
– the programme selector is turned to
"0".
Turning the programme selector to
the "0" position at the end of a
locked programme, or after
interrupting a programme will not
release the safety lock.
^ Call up the a symbol.
Four horizontal bars will appear in the
display.
^ Turn the input dial in a clockwise
direction until a key symbol 0--§
appears in the display.
It will act in this instance as a system
lock.
In order to start a cooking
programme again you will have to
^ Turn the programme selector to "0".
^ De-activate the safety lock/system
lock. To do this:
Call up symbol a, and turn the
(–/+) input dial anti-clockwise until
four horizontal bars appear in the
display.
The programme is now locked.
The key symbol 0--§ will shortly
disappear and the time of day appear
in the display. The a symbol in the
bottom line of the display acts as a
reminder that the safety lock has been
engaged.
If either the function or input dial is
turned, the key symbol 0--§ will appear
briefly in the display in place of the time
of day.
If the programme selector is turned to a
different programme there will also be a
continuous shrill beep.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety lock
De-activating the safety lock
Temperatures and times cannot be
changed during a programme if the
safety lock has been activated.
To switch it off:
^ Call up the a symbol.
^ Turn the (–/+) input dial
anti-clockwise until four horizontal
bars appear in the display.
The safety lock has now been
de-activated and you can change
settings.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Baking
The following settings are
recommended for baking:
Fan Heat D
Several levels can be used at the same
time for baking. The recommended
positions are:
1 tray = 1st runner from the bottom
– Fan Heat D
– Conventional A
2 trays = 1st and 3rd runners from the
bottom
3 trays = 1st , 2nd and, 4th runners
from the bottom
Bakeware
For the best baking results make sure
that you chose bakeware in a material
suitable for the particular heating
system.
If baking on three levels place tins
on the grill pan on the 1st runner
position and on baking trays on the
other runner levels.
Remember to remove the roasting
filter from in front of the fan opening.
Otherwise baking times would be
longer and results uneven.
Fan Heat D
Most types of heat-resistant tins or
dishes are suitable, including
thin-walled and bright, non-reflective
metal tins. Place the tin or dish on the
baking tray in the oven, with the sloping
edge of the tray towards the door.
With Fan Heat D, approx. 20 °C lower
baking temperatures are needed than
with the Conventional A setting.
Conventional A
The following baking tins give an evenly
browned result: Dark metal, aluminium
or enamel tins with a matt finish are
preferable. Heat resistant glass dishes
can also be used.
Avoid bright, shiny metal tins. These
reflect heat which means that the heat
does not penetrate to the food
effectively and will result in uneven or
poor browning. In some cases the
cakes might not cook properly. Place
the tin or dish directly on the non-tip
rack in the oven. Use one shelf position
only.
Conventional A
Only one shelf should be used for this
function. If more than one shelf position
is needed use Fan Heat instead.
This function is particularly good for
rich fruit cakes, pastries and breads
where a fairly long cooking time is
required and a deep colour and good
rise are needed.
It is usually necessary to pre-heat the
oven when using this method.
Place tins on the rack on runner level 2
or 3 so that the food is centrally
positioned in the oven.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Baking
Tips on baking
Eating food which has been cooked
See the Baking Chart and the
Cookbook supplied with this oven
for suggestions of temperatures,
runner heights and times.
correctly is important for good health.
Only bake cakes, pizza, chips etc
until they are golden brown. Do not
allow them to become dark brown.
Place cakes in rectangular tins with
the longer side across the width of the
oven for optimum heat distribution and
even results.
To achieve even results without
over-browning the food
– always select the lowest
When baking cakes with fresh fruit
toppings and tall sponge cakes place
the tin in the grill pan to catch any
spillages and keep the oven cleaner.
temperature given in the
recipe/cooking instructions on the
packaging. Do not set a temperature
higher than that recommended.
Increasing the temperature may
reduce the cooking time, but will lead
to uneven browning, and
When baking anything with a high salt
content (such as pretzels) they must
be placed on baking parchment. High
concentrations of salt can damage
PerfectClean surfaces.
unsatisfactory cooking results.
– Check if the food is cooked at the
end of the shortest time quoted.
To check if a cake is ready, insert a
wooden skewer into the centre.
It is ready if the skewer comes out
clean, without dough or crumbs
sticking to it.
Frozen food
When baking deep frozen products
such as cakes, pizza and baguettes,
use the lowest temperature quoted on
the manufacturer's packaging. Place
such items on baking paper directly on
the wire rack or in the pizza pan (extra
accessory). Placing them on the baking
tray or in the grill pan can cause the
metal to distort. This distortion would
increase with subsequent use.
The cooling fan will continue for a while
after switching the oven off.
Always remove all accessories, trays
and racks which are not being used
when using the oven to get the best
results and to keep cleaning of the
trays to a minimum.
Deep frozen foods such as oven chips
or potato croquettes can be cooked
on the baking tray or in the grill pan.
Place these types of frozen foods on
baking parchment and select the
lowest temperature quoted on the
manufacturer's packaging.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Baking chart
Fan Heat D
Temperature
in °C
rec. runner
from bottom
Time
in mins.
Creamed mixture
Madeira cake
Rich fruit cake
150 – 170
–
1
–
50 – 60
–
Victoria sandwich (tin)
Fudge brownies (tray)
Date and walnut cake
Cookies
160 – 170
160 – 170
–
150 – 170
150 – 170
1
1
–
20 – 25
25 – 30
–
15 – 20
20 – 25
1, 3
1, 2, 4
1) 3)
Small cakes
Whisked mixture
1) 3)
Souffle
180 – 190
160 – 180
160 – 180
2
1
1
25 – 30
20 – 25
20 – 25
1) 3)
1) 3)
Flan base
Swiss roll
Rubbed-in mixture
Sweet pastry base
Scones
150 – 170
200 – 210
170
160 – 180
160
1
1, 3
1
1
1
20 – 25
20 – 25
30 – 35
60 – 115
20
Crumble
Teabread
1)
Shortbread
1)
Apple pie
150 – 170
190 – 210 –
1
1
55 – 75
25 – 35
2)
Savoury pastry
Yeast mixtures
Wholemeal rolls
Lardy cake
–
–
–
–
–
–
Stollen
White bread
Wholemeal bread
Pizza (tray)
150 – 170
160 – 180
190 – 210
170 – 190
170
1
1
1
1
45 – 65
40 – 50
60 – 70
40 – 50
20 – 25
1)
1) 3)
Hot cross buns
1, 3
1) 3)
Choux pastry
Eclairs
160 – 180
170 – 190
1, 3
1, 3
30 – 40
20 – 25
1)
Flaky pastry
1)
Meringues
Macaroons
Meringues
120 – 140
60 – 70
1, 2, 4
1
30 – 50
3 – 4 hours
1) Pre-heat the oven when using Conventional A heat.
2) Pre-heat the oven when using Fan Heat D and Conventional A heat.
3) Switch off "rapid heat-up".
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Baking chart
Conventional heat A
Temperature
in °C
rec. runner
from bottom
Time
in mins.
160 – 180
130 – 150
2
2
–
–
2
–
2
50 – 60
100 – 140
–
–
160
–
–
105 – 120
–
–
180 – 200
12 – 15
190
180 – 200
190 – 210
2
2
20 – 25
15 – 20
15 – 20
2 or 3
180 – 200
200 – 210
170 – 180
160 – 180
–
2 or 3
2 or 3
2 or 3
2
15 – 20
20 – 25
30 – 35
60 – 115
–
–
180 – 200
230 – 250
1
55 – 75
25 – 35
2 or 3
200 – 220
200 – 220
170 – 190
190 – 210
210 – 230
190 – 210
170 – 190
2 or 3
2
20 – 25
25 – 35
45 – 65
40 – 50
60 – 70
40 – 50
20 – 25
2 or 3
2 or 3
2 or 3
2 or 3
2 or 3
190 – 210
200 – 220
2 or 3
2 or 3
25 – 35
15 – 20
130 – 150
–
2
–
30 – 50
–
The information given in this chart is intended only as a guide.
See the cook book supplied with your oven for further details.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Roasting
We recommend the following settings
for roasting in the oven:
Browning only occurs towards the end
of the roasting time. Remove the lid
about halfway through the roasting time
if a more intensive browning effect is
desired.
– Auto Roast E
– Conventional A
Roasting in a covered pot
Open roasting
Auto roast E:
When roasting on the rack or in an
open tin make sure the roasting filter
is fitted in front of the fan in the back
of the oven before starting.
Use shelf position 1 for roasting.
Exception: With conventional A use
runner level 2 for poultry or a cut of
meat or fish up to 1kg.
– This ensures that sufficient stock
remains for making gravy.
The "Auto roast E" system uses an
approximately 20 °C lower roasting
temperature than the "Conventional"
heating system.
– The oven stays cleaner, too.
Roasting pots with a lid made from
earthenware, cast iron, ovenproof china
or glass and roasting foil are all
suitable. Make sure any lids and
handles are heat-resistant.
When roasting on the rack place the
rack and anti-splash tray over the grill
pan.
Season the meat and place in the pot.
Add some knobs of butter or margarine
or a little oil or cooking fat. Add about
1/8 litre of water when roasting a big
lean joint of meat (2-3 kg) or roasting
poultry with a high fat content.
Season the meat and place in the grill
pan.
Place the covered pot on the rack into a
cold oven.
Exception:
Pre-heat the oven to the temperature
suggested when roasting beef and
beef fillet.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Roasting
Calculating the roasting time
The traditional British method is to allow
15 to 20 minutes to the lb, according to
type of meat, plus approx. 20 minutes,
adjusting length of time as roasting
proceeds, to obtain the required result.
Temperature
See the Roasting chart for suggested
temperatures.
Do not select a higher temperature than
that advised. The meat will become
brown, but will not be cooked properly
inside.
Do not roast deep frozen meat. Meat
should be thoroughly defrosted
before roasting.
After the roasting process is finished
^ Take the roast out of the oven, wrap
in aluminium foil and leave to stand
for about 10 minutes.
This helps retain juices when the
meat is carved.
The cooling fan will continue for a while
after switching off the oven.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Oven roasting chart
rec.
runner
from
Conven-
tional A
2)
1)
1)
Auto roast E
2)
Temp.
in °C
Time
in mins.
Temp.
Time
bottom
in °C
in mins.
3)
1
Beef, approx. 1 kg
180
60 – 80
75 – 100
75 – 100
90 – 120
110 – 130
60 – 80
200
70 – 90
100 – 120
100 – 120
110 – 130
150
3)
Venison, approx. 1 kg
Leg of pork, approx. 1 kg
Rolled pork, approx. 1 kg
Leg of lamb, approx. 2 kg
Poultry 1 kg
1
180
220 – 240
200
3)
1
185
3)
1
185 – 190
180
200 – 220
200
1
3)
1
180 – 190
180 – 190
180 – 190
170 -180
160 – 180
200 – 220
200 – 220
200 – 220
190 -210
200 – 220
70 – 90
Poultry, approx. 2 kg
Poultry, stuffed, approx. 2 kg
Poultry, approx. 4 kg
Whole fish, approx. 1.5 kg
1
1
1
100 – 110
100 – 120
160 -180
35 – 55
110 – 120
110 – 140
170 -190
35 – 55
3)
1
Unless otherwise stated, the times given are for an oven which has not been pre-heated.
1) Fit the roasting filter in place
2) If pot roasting, set the temperature 20 °C higher.
3) Use runner level 2 for Conventional A.
The information given in this chart is intended only as a guide.
See the cookbook supplied with your oven for further details.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Grilling
Clean flat fish and slices of fish in the
Pre-heat the grill for at least 5
minutes with the oven door closed.
Grilling with the oven door shut
saves energy and minimises
cooking smells.
normal way. To enhance the taste add a
little salt or squeeze a little lemon juice
over the fish.
Grilling on the rack
If you grill with the door open the hot
air will escape from the oven and not
get cooled by the cooling fan.
Control elements on the oven could
get hot. Danger of burning!
Put the roasting filter in front of the
fan grille in the back of the oven
when using this setting.
The grill is thermostatically
controlled, and at times during
grilling the element will not glow red.
This is normal.
^ Assemble the rack on the grill pan
and use the anti-splash tray if you
have one (see "Optional
accessories").
^ Place the food on the rack.
^ Select the required grill setting.
^ Set the temperature.
The oven has two grill settings:
Grill n
For grilling thin cuts and for browning
food.
^ Pre-heat the grill for at least 5
minutes with the door shut before
grilling.
Fan Grill N
^ Place the grill pan under the grill and
shut the door.
For grilling thick cuts, e.g. rolled meat,
poultry.
For thin cuts use
runner level 4 or 5
Preparing food for grilling
For thickers cuts use
runner level 3 or 4
Clean, wipe and season with pepper
and herbs. Do not season meat with
salt before grilling as this draws the
juices out.
^ Most items should be turned half way
through cooking.
Add a little oil if necessary. Other fats
quickly become black or cause the
food to smoke.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Grilling
Temperature
Tips on grilling
For thin cuts of meat
It is best to grill food of a similar
(e. g. chops or steak) . . . . . . . . . 275 °C thickness at the same time so that the
grilling time for each item does not vary
For grilling larger items,
too greatly.
(e. g. rolled meat, poultry) . . . . . 240 °C
One way of finding out how far through
See the grill chart for more information.
a piece of meat has been cooked is to
press down on it with a spoon:
To grill thicker pieces of food more
gradually after an initial high
temperature, continue grilling at a lower
temperature setting to allow the food to
cook through to the centre.
– If there is very little resistance to the
pressure of the spoon, it is still red on
the inside ("rare").
– If there is some resistance the inside
will be pink ("medium").
Grilling time
– If there is great resistance, it is
throughly cooked through ("well
done").
– Flat pieces of fish and meat usually
need 5 – 6 minutes per side
depending on their texture.
– Use the Auto roast function for
thicker cuts.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Grill chart
Pre-heat the grill for at least 5 minutes with the door closed.
1)
1)
Food to be grilled
Runner
from
bottom
Grill n
Temperatur
Fan grill N
Total
grill time
in mins.
Temperatur
e in °C
Total
grill time
in mins.
e in °C
2)
2)
Flat items
Steak
4 or 5
3
300
220
220
240
240
240
200
250
250
240
10 – 16
25 – 30
20 – 25
14 – 20
6 – 10
12 – 16
16 – 20
2 – 4
220
220
10 – 16
25 – 30
20 – 25
16 – 20
8 – 12
12 – 16
20 – 25
3 – 5
Kebab / mixed grill
Chicken kebabs
Burgers
3
200 – 220
220
4 or 5
4 or 5
4 or 5
4 or 5
4 or 5
4 or 5
4 or 5
Sausages
220
Fish fillet
220
Trout
220
Toast
220
Open toasted sandwich
Tomatoes
7 – 9
220
4 – 6
6 – 8
220
6 – 8
Thicker pieces of food
Chicken (approx. 1 kg)
2
240
50 – 60
200 – 220
50 – 60
Rolled meat, Ø 7 cm
(approx. 1 kg)
1
1
240
240
75 – 85
200
200
75 – 85
Leg of pork (approx. 1 kg)
100 – 120
100 – 120
1) Use the roasting filter when grilling.
2) Turn half way through the grilling time.
The information given in this chart is intended only as a guide.
See the cookbook supplied with your oven for further details.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Defrosting
You can also use the oven for
defrosting.
Chicken, 800 g. . . . . . . . 90 – 120 mins.
Meat, 500 g . . . . . . . . . . . 60 – 90 mins.
Meat, 1,000 g . . . . . . . . . 90 – 120 mins.
Sausages, 500 g . . . . . . . 30 – 50 mins.
Fish, 1,000 g. . . . . . . . . . . 60 – 90 mins.
Strawberries, 300 g . . . . . 30 – 40 mins.
Cake, 500 g . . . . . . . . . . . 20 – 30 mins.
Bread, 500 g . . . . . . . . . . 30 – 40 mins.
To defrost select Fan heat D with a
maximum temperature of 50 °C.
For defrosting meat and delicate foods
use the lowest possible temperature
(30°C).
Please note the following
– Where possible remove the
packaging and put the food to be
defrosted on a baking tray or into a
dish.
Do not refreeze food once it has
been thawed.
– All meat and poultry should be fully
defrosted before cooking. Do not use
the liquids from defrosting.
– When defrosting poultry put it on the
rack over the grill pan to catch the
defrosted liquid, so that the meat is
not lying in this liquid.
It is particularly important to observe
food hygiene rules when defrosting
poultry. Do not use the liquid from
the defrosted poultry. Pour it away,
and wash the tray, the sink and your
hands. Danger of salmonella!
– Fish does not need to be fully
defrosted before cooking.
Defrost so that the surface is
sufficiently thawed to take herbs and
seasoning.
Defrosting times
The time needed for defrosting
depends on the type and weight of the
food, and at what temperature it was
deep frozen. The following chart is for
guidance only.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Appliance front and control
panel
Clean the door handle and the control
elements regularly, preferably after
each use.
This will help prevent grease or other
deposits adhering to surfaces and
becoming difficult to remove.
^ All external surfaces and controls can
be cleaned using warm water with a
little washing up liquid applied with a
soft sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
Aluminium fronted appliances
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
Part number 98013530, which is
suitable for cleaning surfaces such as
stainless steel, glass, plastic and
chrome without the use of chemicals.
This cloth can be washed 300 times.
Aluminium surfaces and controls
may suffer discolouration or damage
if acids, alkalis or soiling are left on
them for too long. Remove these
straight away.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances pay particular
attention to the following cleaning
instructions.
The appliance front and controls are
susceptible to scratches and abrasion.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Glass fronted appliances
The appliance front and controls are
susceptible to scratches and abrasion.
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
Avoid:
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– stainless steel cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– cleaning agents containing
descaling agents,
– dishwasher detergent,
– oven sprays.
– oven sprays.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Stainless steel fronted
appliances
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– oven sprays.
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning
instructions for
– stainless steel surfaces,
– stainless steel coloured controls
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel, or with the
Miele E-Cloth.
If you are unsure about a particular
product or need further advice please
contact your nearest Miele Sales
office. See back page for address.
Avoid:
Accessories
– cleaning agents containing soda,
acids or chlorides,
Do not leave accessories in the oven
when they are not in use.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Racks and side supports
The stainless steel surfaces of these
have been treated with PerfectClean
enamel.
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
They should be cleaned in the same
way as other surfaces coated with
To help prevent re-soiling, a proprietary PerfectClean. See "PerfectClean".
conditioning agent for stainless steel
can also be used.
Roasting filter
Apply sparingly with an even pressure
following the direction of the "grain".
Clean in a solution of hot water and a
little washing up liquid or in the
dishwasher.
Stainless steel coloured controls
Note: some dishwasher detergents may
cause the surface of the metal filter to
discolour. This discolouration will not
affect the functioning of the filter in any
way.
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove any soiling straight away.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
PerfectClean
Normal soiling
Clean as soon as possible after each
use with a dishcloth, soft sponge (e.g.
the Vileda sponge as supplied with the
oven) or a soft nylon brush, and a
solution of hot water and a little washing
up liquid. The longer soiling is left the
harder it may become to remove.
Before using for the first time remove
any stickers from PerfectClean
surfaces.
The enamelled surfaces of the oven
interior, baking tray, grill pan, rack and
side supports have been treated with a
new type of enamelling called
"PerfectClean".
Stubborn soiling
Stubborn soiling e.g. from roasting may
need to be soaked first with a damp
sponge to loosen it and if necessary a
scraper suitable for glass surfaces can
be used to remove it.
This surface has very good anti-stick
properties which is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Food can be taken off it more easily
and soiling from baking and roasting is
easier to remove.
After cleaning rinse thoroughly with
clean water. The water must run off the
surface easily. Any residual cleaning
agents will hinder this effect.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
Using oven sprays on very stubborn
soiling
PerfectClean last for many years.
PerfectClean surfaces can be treated
as you would treat glass. If you are
unsure whether a particular cleaning
product is suitable for PerfectClean
consider whether you could clean a
window pane with the product without
damaging it.
Some oven cleaners contain strong
alkalines and / or abrasive
materials. Because the enamel is
designed to be easily cleaned the
use of these cleaners is not
recommended.
However if you still cannot get the
surface clean, an oven cleaner can
be used for a couple of minutes only.
Do not attempt to use on a hot oven
or accessories. Allow the
Food can be sliced or cut up on the
PerfectClean surface in the same way
as on a baking tray with conventional
enamel.
PerfectClean surfaces to cool down
to room temperature before applying
oven sprays!
Allow the oven and any accessories
to cool down before cleaning.
Danger of burning!
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Remove the catalytic back panel,
side liners (if fitted) and roof panel
before using oven sprays. The
chemicals used in oven sprays will
damage catalytic enamel rendering
it ineffective.
The following cause lasting damage
to the surface structure and reduce
the anti-stick effect and must not be
used on PerfectClean surfaces:
– abrasive cleaning agents
– wire wool or metal scourers
– pot scourers
Apply a spray oven cleaner to the
soiled areas. Leave to take effect for a
couple of minutes only!
– oven cleaning pads
– sponges and cloths which have
previously been used with
abrasive cleaning agents.
– oven spray must not be used in a
hot oven or left on for too long.
– items coated with PerfectClean
enamelling must not be cleaned
in a dishwasher.
If necessary use a soft sponge (e.g. the
Vileda sponge as supplied with the
oven), soft nylon brush or a scraper
suitable for glass surfaces to loosen the
soiling.
Repeat the process if necessary.
After cleaning rinse thoroughly with
clean water and then dry thoroughly.
Note
Important
Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise
caution, make sure the oven is not hot -
danger of burning!
For optimum performance of the
PerfectClean enamel it is important to
clean the oven and accessories after
each use.
Spilt fruit juices may cause lasting
discolouration of the surfaces and
roasting can cause matt areas to
appear. Clean these following the
instructions given above and do not try
and use force to remove them! This
discolouration is permanent but will not
affect the efficiency of the enamel.
The surfaces will become harder to
clean and the anti-stick properties
will deteriorate if soiling is not
removed after each use and allowed
to build-up. In extreme cases
cleaning may even become
impossible.
When baking items with a high salt
content (e.g. continental pretzels) place
them on baking parchment in the
baking tray or grill pan. Sodium
deposits can cause lasting
discolouration to PerfectClean
surfaces.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Catalytic enamel surfaces
Cleaning catalytic enamel surfaces
by hand
The back panel, the roof liner and
side liners (if fitted) are coated with
catalytic enamel.
Allow the oven to cool down before
cleaning. Danger of burning!
Catalytic enamel has very good
self-cleaning properties.
^ The catalytic enamelled back panel,
side liners and roof liner should be
cleaned using a solution of hot water
with a little washing up liquid applied
with a soft nylon brush.
During fan operated cooking,
circulating air in the oven deposits oil
and fat splashes predominantly on the
back panel of the oven.
Do not use abrasive cleaning
agents, hard brushes, scouring
pads or cloths, steel wool, knives or
other abrasive materials and do not
use oven spray on catalytic enamel
as the chemicals used in oven
sprays will damage catalytic
enamel, rendering it ineffective.
If using oven sprays on PerfectClean
oven surfaces, the catalytic back
panel, side liners (if fitted) and roof
liner must first be removed from the
oven.
When this catalytic enamel is heated to
temperatures above 200 °C, oil and
grease deposits are removed
automatically. The higher the
temperature the more effective the
process.
The oven and accessories should be
cleaned after each use. Otherwise
further baking and roasting will cause
the deposits to bake on even harder
and cleaning may become difficult and
in extreme cases impossible.
Note that deposits of spices, syrups
and similar substances are not
removed by this process. These should
be removed while fresh by hand with a
mild solution of hot water and washing
up liquid applied with a soft brush.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning catalytic enamel surfaces
using high temperatures
To clean using high temperatures:
^ Take all accessories out of the oven.
^ Select Fan Heat D.
If, after manual cleaning, the oven is
still heavily soiled heating it to a high
temperature will help remove soiling
caused by oil and grease splashes
from the catalytic surfaces.
^ Select the highest temperature
setting.
Run the oven for approx. 1 hour. The
length of time will depend on the level
of soiling.
Before cleaning the catalytic panels
using high temperatures, make sure
that all PerfectClean surfaces have
been cleaned as previously
Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.
described. Otherwise, the high
temperatures can cause deposits on
PerfectClean surfaces to become
baked on and impossible to remove.
The timer can also be used to set the
finish time (see "Switching off
automatically").
Should the catalytic coating on the
back panel, side liners or the roof
liner become ineffective through
improper use or heavy soiling, a
replacement can be obtained from
your Miele dealer or the Miele Spare
Parts dept.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cooking compartment
To make cleaning easier you can
– remove the oven door,
^ Open the door fully.
– dismantle the oven door,
– take out the runners,
– lower the top heating element,
– and take out the back panel, side
liners (if fitted) and roof liner.
To remove the oven door
^ To release the locking clamps on the
hinges turn them upwards as far as
they will go until they are at an angle.
See illustration.
The oven door is connected to the oven
by hinges.
^ Then lift the door upwards as far as it
will go.
Do not attempt to take the door off
the hinge guides when it is in a
horizontal position. The guides will
close and damage the appliance.
There is also a danger of injury.
Before removing the door the locking
clamps on both hinges have to be
released.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To dismantle the oven door
The oven door has seals on all sides to
protect it.
In the rare event that condensate has
worked its way in between the glass
panes, the door can be dismantled in
order to clean in between the panes.
Do not use scouring agents, hard
sponges or brushes to clean the
glass panes. These could damage
the surface.
Do not use an oven spray. This
would damage the surface of the
aluminium surrounds.
^ Always remove the oven door before
dismantling it.
^ Hold the door securely at both sides
and lift upwards off the hinge guides.
^ Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched.
The door handle should line up with
the edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
Do not lift the door off by the handle.
The handle could break.
Make sure that you lift the door off
equally on both sides.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Depending on model the oven door is
fitted with two or three glass panes.
On oven doors with three panes the
middle pane can also be taken out.
^ Press the pins near the hinge guides
on both sides of the door in (1) to
release the inner glass pane from its
retainers.
The inner pane will automatically lift
upwards.
Lift up the inner glass pane (2) and
release it from the aluminium guides
on the outer pane.
^ Lift this pane up slightly before
removing it.
^ Clean each pane individually
being extremely careful to avoid the
risk of breakage.
The aluminium guides on the outer
and inner glass panes are bonded
to the glass and cannot be removed.
^ Put the door back together again.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ When replacing the inner pane make
sure that the aluminium guide and
handle face upwards. The words
"Miele CleanGlas" will then be legible.
^ Refit the middle pane (depending on
model).
If the seals on the inner pane have
loosened during cleaning you will
have to push them back into the
guides making sure that the profiled
part of the seal faces inwards (see
detail on illustration).
See detail on illustration.
– The panes have a different coating
on each side.
The printed figure must be legible.
This ensures that the side with a heat
reflective coating faces into the oven
compartment.
– The pane must sit evenly on the seal
and not on the screw heads in the
aluminium guides.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
After lowering it into position the inner
pane has to be pushed back into its
retainers.
This is easier to do if you push one side
into its retainer first and then do the
other side.
^ Hook the inner glass pane into the
aluminium guides on the outer pane
and lower it into position.
Make sure when lowering the inner
pane that it does not come out of its
fixings.
^ Finally using the ball of your hand
press down on the aluminium trim on
the inner pane to make sure it goes
back into position. You will hear a
very clear "click" when doing this.
The retaining pins are pushed back
out when you do this.
Before putting the door back on
make sure that the inner pane is
sitting correctly in its retainers and
that it cannot come loose and get
damaged.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To refit the door
^ Open the door fully.
^ Flip both locking clamps back up to
lock them. Turn them as far as they
will go into a horizontal position.
Make sure that the notches on the
locking clamps hook into the slots on
the door as illustrated.
It is essential that the locking clamps
lock securely when the door is
re-fitted after cleaning. Otherwise
the hinges could work loose from the
hinges and this could result in
damage to the door.
^ Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Make sure that the door goes back
on straight.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the runners
To lower the upper heating element
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
^ Remove the runners.
^ Pull on the fixing knob to release it.
^ Pull on the fixing knob to release it.
^ Gently lower the element.
^ Remove the runners.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Do not use force to pull it down as
this can cause the element to break.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the catalytic enamelled
back panel, side liners (if fitted) and
roof liner
– Roof liner
^ Remove the runners.
^ Lower the top heating element.
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
The catalytic panels and liners can be
removed for cleaning if necessary.
See "Cleaning and Care" for more
information.
^ Hold the roof liner firmly and unscrew
the knurled knob.
– Back panel
^ Take out the roof liner.
^ Remove the runners.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
– Side liners
(depending on model)
^ Remove the runners.
^ Lift the side liners up slightly before
removing them.
^ Loosen the screws in the back panel
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
and take it out.
The oven must not be used without
the back panel fitted. This could
cause considerable injury.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
When reassembling the catalytic side
liners, ensure they sit correctly.
^ Ease the back lug into the opening in
the rear wall panel.
^ Put the runners back into place.
^ Lift the front locating hole on to the
guide pin behind the collar.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
The showroom display programme has
now been deactivated. The oven can
now be used again as normal.
Installation, maintenance and repairs
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations.
. . . the heating works, but not the
oven lighting.
Repairs and other work by
The lamp needs changing.
To change the lamp:
unqualified persons could be
dangerous and the manufacturer will
not be held responsible.
^ Disconnect the appliance from the
electricity supply.
Switch off and unplug at the socket,
or remove the fuse, or switch off at
the isolator as appropriate.
Some minor problems can be corrected
without contacting the Miele Service
Department:
^ Remove the runners and side liners
(if fitted).
What to do if ...
. . . the oven does not heat up.
Check whether,
^ the system lock has been activated.
^ the mains fuse has blown. Contact a
qualified electrician or the Miele Ser-
vice Department.
^ MES_ appears briefly in the display
when the programme selector is
turned to the light H position.
The oven is set to the showroom
display programme. In this setting you
can select a programme as normal but
the oven will not heat up.
^ Lift the lamp cover from its retainers.
^ Change the lamp:
230-240°V, 25 W, E 14, heat
resistant to 300°C.
To deactivate the showroom display
programme:
^ Press the lamp cover back into its
retainers.
– Turn the programme selector to H.
MES_ will appear in the display.
^ Replace the runners and side liners.
– Call up the a symbol.
– Turn the input dial anti-clockwise until
four horizontal bars appear in the
display.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
. . . there is a distinctive smell of food
when using the oven.
. . . cakes and biscuits are not cooked
after following the times given in the
chart.
This applies to model H 334 B KAT
only:
Check whether,
Check the position of the lever for
switching on the catalyser. If it is at the
^ the correct temperature was set.
"0" position the catalyser is switched off. ^ there has been a change to the
recipe. The addition of more liquid or
more eggs makes a moister mix
which would need longer to cook.
To switch the catalyser on, please push
the lever over to the right to position "I".
. . . no noise is heard when the oven
door is opened during operation.
^ the roasting filter was left in front of
the fan when baking with Fan heat
D. In this case baking times might
be lengthened by 10 to 15 minutes.
This is not a fault.
If the door is opened during operation,
the door contact switch causes the
oven heating, and the fan if on "Fan"
setting, to be switched off.
. . . cakes or biscuits are unevenly
browned.
There will always be a slight
. . . a noise can be heard after baking, unevenness. Product information
sheets give a percentage result for
standard browning tests. These refer to
results for one tray.
roasting or grilling.
This is not a fault.
The cooling fan continues to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit. When the
temperature has fallen sufficiently the
fan switches off automatically.
If browning is very uneven, check
when baking with Fan Heat D:
– whether the temperature was set too
high,
– whether the roasting filter was in
place,
The temperature will fall faster when the
oven door is opened partially or fully.
– whether the correct runner height
was used.
when baking with Conventional A:
– the colour and composition of the
baking tins being used. Light
coloured, shiny, or thin walled tins
are less suitable,
– whether the correct runner height
was used.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving
. . . spots like rust appear on catalytic . . . "F" and a number appear in the
surfaces.
oven display field.
When roasting on the rack, the
This combination indicates a fault.
circulating air sometimes picks up
spices, which are then deposited on
the oven interior walls. Such residues
are not removed by catalytic cleaning,
they are best removed while fresh with
a mild solution of hot water and
– "F55": the oven has automatically
switched itself off during use. This is
a safety feature to protect the oven if
it has been operating for an
exceedingly long period. The length
of time depends on the oven function
selected.
washing up liquid and a soft brush.
The oven can be used again immedi-
ately by simply turning the oven
function selector to "0" and then
entering the process again.
. . . there has been a power cut and
"12:00" and the triangle V are
flashing underneath the m symbol.
All pre-set times are deleted as a result
of the power failure.
– Any other fault messages:
If any other fault message appears
in the display, this will need a service
visit.
^ Enter the time of day again, and any
other pre-set data.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
When contacting the Service
cannot remedy yourself, please contact Department, please quote the model
and serial number of your appliance.
– Your Miele Dealer
These are shown on the data plate,
visible below the oven interior, with the
or
– The nearest Miele Service
Department (see back cover for
address).
door fully open.
Please note that telephone calls may
be monitored and recorded to
improve our service.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra accessories
The following accessories may come as Anti-splash tray
standard with some models. They are
also available at extra cost from your
Dealer or the Miele Spare Parts Dept.
Telescopic baking carriage
The anti-splash tray should be placed
in the deep-sided grill pan when grilling
or roasting. The juices from the food
being cooked collect under the
anti-splash tray. This prevents them
from spitting and making the oven dirty.
The juices can then be used for making
gravy and sauces.
The telescopic baking carriage with
5 levels of runners can be drawn right
out of the oven. This gives a good
overview of all the cooking in progress.
Handle
Telescopic runners
The telescopic runners provide three
shelf levels.
Each shelf level can be drawn right out
of the oven individually to give a good
overview of cooking in progress
The handle makes it easier to take baking
trays, grill pan and rack out of the oven,
or to put them into it. The two prongs at
the top go inside the pan, rack or tray
and the U-shaped supports underneath.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra accessories
Pizza pan
Gourmet oven dish
This circular pan is suitable for cooking
pizzas, flat cakes made with yeast or
whisked mixtures, sweet and savoury
tarts, baked desserts, and can also be
used for deep frozen cakes and pizzas.
The gourmet oven dish can be placed
in the oven directly on the runners. It
has non-tip safety notches like the
baking tray to prevent it being pulled
out too far.
It has a special protective anti-stick
coating.
Baking stone
It is available either 22 or 35 cm deep.
A lid is available separately.
Catalytic side liners
If you roast or grill frequently catalytic
coated side liners can be fitted in the
sides of the oven to help keep the oven
clean.
The baking stone is ideal for items
which need a well baked base such as
pizza, quiche, bread, bread rolls and
savoury snacks.
When ordering please state the model
number of your oven and whether it is
fitted with side runners or a telescopic
baking carriage.
The baking stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
Catalyser
The catalyser is fitted into the oven’s
ventilation system.
A paddle made of untreated wood is
supplied with it for placing food on the
baking stone and taking it off.
It filters fat from the escaping vapours
and thus reduces cooking smells.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection UK, ZA
Connection of this appliance should be
made either via a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been built in.
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with national and local
safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held responsible for
unauthorised work.
If the socket is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to install
a residual current device with a trip
current of 30 mA (in accordance with
DIN VDE 0664, VDE 0100 Section 739).
Ensure power is not supplied to the
appliance while installation or repair
work is being carried out.
The voltage, rated load and fusing are
given on the data plate, visible below
the oven interior, with the oven door
open. Ensure that these match the
household mains supply. Please quote
these data, and the model and serial
number when contacting the Miele Ser-
vice dept.
When switched off there must be an
all-pole contact gap of 3 mm in the
isolator switch (including switch, fuses
and relays acc. to EN 60 335).
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection UK, ZA
Important U.K.
ZA
This appliance is supplied with a 3-core Data relating to electrical connection
cable for connection to a single phase
230-240 V 50 Hz supply.
will be found on the data plate, visible
when the oven door is open. Make sure
that these figures comply with the main
voltage. Connection should be made
via a suitable isolator which complies
with national and local regulations.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue
Brown
= neutral
= live
The appliance is supplied with a 3-core
cable for connection to a 230-240 volt
50 Hz supply.
In other countries check these details
with your supplier.
The fuse rating is 20 amps for the
"B"-model.
WARNING
The wires are coloured in accordance
with the following code:
THIS APPLIANCE MUST BE
EARTHED
Green/yellow = earth
Blue
= neutral
= live
Brown
WARNING
THIS APPLIANCE MUST BE
EARTHED.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection AUS, NZ
AUS
All electrical work should be
undertaken by a competent person
in strict accordance with national
and local safety regulations.
Wall oven
The wall oven is suitable for connection
to an a.c. single phase 240 V, 50 Hz
electricity supply.
The voltage and rated load are given
on the data plate, visible when the oven
door is open. Please ensure that these
match the household mains supply.
Please quote these data, and the model
and serial number when contacting the
Miele Service dept.
The fuse rating is 16 A.
NZ
Wall oven
Connection of this appliance should be
made via a suitable isolator which
complies with national and local
regulations, and which is accessible
after the appliance has been built in.
The wall oven is suitable for connection
to an a.c. single phase 230 V, 50 Hz
electricity supply.
The fuse rating is 16 A.
WARNING
THIS APPLIANCE MUST BE
EARTHED.
Test marks . . . . . . . . . . Electrical Safety
. . . . . . . . . . . . . . . . . . . . . . C-Tick Mark
Electrically suppressed
according to. . . . . . . . . . . AS/NZS 1044
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the oven
Do not fit insulation material inside
the housing unit. This would hinder
the intake of air to cool the
appliance.
Turn off the mains electricity supply
to the isolator.
^ Connect the oven to the electricity
supply by the isolator.
^ Place the oven into the oven housing
unit as far as the oven trim and align.
^ Open the oven door and using two
screws secure the oven to the side
walls of the housing unit through the
holes in the oven trim.
The oven must be built in to be
operated.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 22 / 3603
(H 334, H 344-2)
M.-Nr. 05 844 950 / 02
This paper consists of cellulose which has been bleached without the use of chlorine.
Download from Www.Somanuals.com. All Manuals Search And Download.
|