Operating and installation instructions
Oven
H 5981 BP
en - GB
To avoid the risk of accidents or
damage to the appliance it is
essential to read these instructions
before it is installed and used for the
first time.
M.-Nr. 07 293 000
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Automatic programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SpeedLight during the heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Manual operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Selecting a function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Recommended temperature, Selecting the temperature . . . . . . . . . . . . . . . . . . . 29
Entering the duration, start time or finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Automatic switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Delaying the start with Automatic switch-off. . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Sequence of a time-controlled cooking programme, Using the residual heat. 31
Changing or deleting an entered cooking time . . . . . . . . . . . . . . . . . . . . . . . . 31
Changing the heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Pre-heating the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Activating moisture reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Change function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
User programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
The User programmes menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
To create a User programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
How the food probe works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Important notes about using the food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
To use the food probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Time left display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the residual heat, Energy save function. . . . . . . . . . . . . . . . . . . . . . . . . 39
Moisture plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Automatic programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Night baking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Moisture plus function d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Number of bursts of steam and when they are injected. . . . . . . . . . . . . . . . . . 42
Using Moisture plus d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Evaporate residual moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Descaling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Minute minder (egg timer) N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting the time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Catalyser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cooling fan run-on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Pyrolytic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Recommended temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ß Buzzer tones (polyphonic tune). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
ß Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
SpeedLight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
To activate the system lock: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Units. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Showroom programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Appliance front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
PerfectClean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Oven interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
To remove the oven door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
To dismantle the oven door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
To refit the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
To remove the FlexiClip telescopic runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
To remove the side runners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
To lower the top heat/grill element. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Descaling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Building-in diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Installing the oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
This oven is not intended for use by
~
This appliance conforms to current
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they are supervised
whilst using it or have been shown how
to use it by a person responsible for
their safety.
safety requirements. Inappropriate
use can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time. They
contain important notes on
installation, safety, use and
maintenance.
Safety with children
This appliance is not a toy! To
~
prevent the risk of injury or damage do
not let children play with the appliance
or its controls.
Keep these instructions in a safe
place and ensure that new users are
familiar with the contents. Pass them
on to any future owner.
Older children may only use the
~
oven when its operation has been
clearly explained to them and they are
able to use it safely, recognising the
dangers of misuse.
Great care should be taken to
~
Correct application
ensure that children do not touch the
appliance when it is being used.
Children's skin is far more sensitive to
high temperatures than that of adults.
External parts of the oven such as the
door glass, control panel and the vent
become quite hot.
The appliance is intended for
~
domestic use to cook food, and in
particular to bake, roast, grill, cook,
defrost and dry fruit. Any other usage is
at the owner's risk and could be
dangerous. The manufacturer cannot
be held liable for damage resulting
from incorrect or improper use or
operation.
The oven door gets much hotter
~
during pyrolytic operation than during
normal use.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Before connecting the appliance,
~
make sure that the connection data on
Installation, maintenance and
~
the data plate (voltage and connected
load) match the mains electricity
supply.
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a competent person
if in doubt.
Do not connect the appliance to the
~
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
Before installation, check the
~
appliance for visible signs of damage.
Do not install and use a damaged
appliance. A damaged appliance could
be dangerous.
For safety reasons, this appliance
~
The electrical safety of this
~
may only be used when it has been
built in.
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system. It is
most important that this basic safety
requirement is present and tested
Never open the housing of the
~
appliance.
Tampering with electrical connections
regularly, and where there is any doubt or components and mechanical parts is
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
highly dangerous to the user and can
cause operational faults.
While the appliance is under
~
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
During installation, maintenance and Correct use
~
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
Caution. Danger of burning.
High temperatures are produced by
the oven.
– the mains fuse is disconnected,
Use oven gloves when placing food
~
in the oven, turning or removing it and
when adjusting oven shelves etc. in a
hot oven. Be very careful that you do
not burn yourself on the top heating/grill
element.
– the screw-out fuse is removed (in
countries where this is applicable),
– it is switched off at the isolator.
Ensure that current is not supplied to
the appliance until after maintenance
or repair work has been carried out.
Never leave the appliance
~
unattended when cooking with oil or
fats, as these are a fire hazard if
allowed to overheat.
Faulty components must only be
~
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
Do not exceed the recommended
~
grilling times when using the Full grill,
Economy grill and Fan grill functions.
Excessively long grilling times can lead
to food drying out and burning, or could
even cause it to catch fire.
If the supply cord is damaged, it
~
must be replaced by a Miele approved
service technician to avoid a hazard.
Do not use the Full grill, Economy
~
grill or Fan grill to finish baking
par-cooked rolls or bread or to dry
flowers or herbs. Fire hazard.
Use Fan plus or Conventional heat
instead.
This appliance may only be used in
~
mobile installations such as ships,
caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
In countries where there are areas
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surroundings in a
clean condition at all times. Any
damage caused by cockroaches or
other vermin will not be covered by the
guarantee.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
If using alcohol in your recipes, high If using a tray made by a different
~
temperatures can cause the alcohol to
vaporise and even to ignite on the hot
heating elements.
manufacturer, make sure that there is a
gap of at least 6 cm between the
bottom of the tray and the floor of the
oven.
Alcohol should be burnt off before the
dish is placed in the oven to avoid this
danger.
Never pour cold water onto a hot
~
universal tray or add directly onto food
in a hot oven. The steam created could
Cover any food which is left in the
~
oven to be kept hot. Any moisture in the cause serious burns or scalding and
food could lead to corrosion damage in the sudden change in temperature can
the oven. This also prevents the food
from drying out.
damage the enamel.
Always ensure that food is suitably
~
If you wish to complete a cooking
cooked or reheated.
~
process using the residual heat in the
oven, leave the oven at the function
selected and select the lowest
Some foods may contain
micro-organisms which are only
destroyed by thorough cooking at
temperatures over 70°C for a minimum
of 10 minutes. Therefore when cooking
temperature for that function. Do not
switch the appliance off until the food
has been removed. Increased moisture or reheating foods, e.g. poultry, it is
in the oven could cause condensation
to form which could lead to
particularly important that food is fully
cooked through. If in doubt select a
longer cooking or reheating time.
It is important that the heat is allowed to
spread evenly throughout the food
being cooked. This can be achieved
by stirring and/or turning the food
– corrosion inside the oven.
– damage to the control panel, worktop
and surrounding kitchen furniture.
Do not line the floor of the oven with
~
aluminium foil when using Conventional during cooking.
heat, Bottom heat or Intensive bake.
If using plastic containers for
~
This would cause a build-up of heat
which could cause damage to the floor
of the oven.
cooking, they must be declared by the
manufacturer as being suitable for use
in an oven. Other types of plastic
containers melt at high temperatures,
and could damage the oven.
For this reason do not place a dish, tin
or baking tray directly on the oven floor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Do not heat up unopened tins or jars
Remove all accessories as well as
~
~
of food in the oven. Pressure can build
the runners and any extra accessories
such as FlexiClip runners from the oven
interior before starting the pyrolytic
cleaning process. The high
up and they may explode, resulting in
injury or damage.
Do not push pots and pans around
~
temperatures needed for pyrolysis will
damage the accessories.
on the oven floor as this could damage
the surface.
Only use the Miele food probe
~
Do not lean or sit on an open oven
~
supplied with this oven.
door, or place heavy items on it. Make
sure that nothing gets trapped between
the door and the oven compartment.
This could damage the oven.
If a replacement is necessary it can be
obtained from the Miele Spare Parts
Department or your Miele dealer.
The oven door can support a maximum
load of 15 kg.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Do not use the appliance to heat up
~
the room. Due to the high temperatures
radiated, objects near the appliance
could catch fire.
Accessories
Only use genuine Miele spare parts
~
and accessories with this appliance. If
spare parts or accessories from other
manufacturers are used, this will
invalidate the guarantee, and Miele
cannot accept liability.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Disposal of the packing
material
Disposing of your old
appliance
The transport and protective packing
Electrical and electronic appliances
has been selected from materials which often contain materials which, if
are environmentally friendly for
disposal, and can normally be
recycled.
handled or disposed of incorrectly
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
It should be unplugged or disconnected
from the mains electricity supply be a
competent person.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the appliance
H 5981 BP
aControl panel
bDoor lock for pyrolytic operation
cTop heat/grill element
dSteam inlet openings for Moisture plus
eBack panel with air inlets for the fan and receiver for the wireless food probe
fSide runners with three shelf levels
gWater intake tube for the steam injection system
hWireless food probe holder
iDoor
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Oven controls
Safety features
In addition to operating the various
cooking programmes to bake, roast
and grill, the controls also offer the
following:
System lock
The system lock 0 prevents the oven
from being used unintentionally by
children, for example. See "System
lock".
– a time of day display,
– a minute minder,
– a timer for programming cooking
durations,
Safety switch-off
– user programmes,
Safety switch-off is triggered
– automatic programmes,
– settings that can be customised.
automatically if the oven is operated for
an unusually long period of time.
The period of time will depend on the
particular oven function being used.
The oven will switch off automatically
and "Fault 55" will appear in the display.
The oven can be used again immedi-
ately after switching it off and back on.
SpeedLight illumination
Cooling fans
The cooling fans will come on
automatically when a cooking
programme is started. The cooling fans
mix hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
The SpeedLight illumination beneath
the control panel
– lights up yellow when the oven is
switched on
The cooling fans will continue to run for
a while after the oven has been
– then changes colour during the
heating up phase. When the required
temperature is reached it lights up
red.
switched off to prevent any humidity
building up in the oven, on the control
panel or on the oven housing unit.
You can change the default setting for
these, see "Settings - SpeedLight".
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Door lock for pyrolytic operation
Pyrolytic cleaning
For safety reasons the door is locked as The oven interior can be kept clean by
soon as the pyrolytic cleaning
programme is started. After the
pyrolytic programme has finished, the
door will remain locked until the
temperature in the oven has fallen
below 280°C.
using the Pyrolytic function.
The oven interior is heated up to
approx. 460 °C. Any residual soiling is
broken down and reduced to ash by
the high temperatures.
See "Cleaning and care" for more
information.
Moisture plus
This function injects moisture during the
cooking process, giving excellent
results when cooking various types of
food, such as bread or meat.
PerfectClean treated surfaces
The following surfaces are all treated
with a special PerfectClean finish:
– Runners,
Water is taken in via the intake tube
below the control panel on the left. The
water is then injected as bursts of
steam into the oven compartment
during the cooking process.
– Universal tray, anti-splash insert and
– Rack
PerfectClean surfaces have very good
anti-stick properties and are much
easier to keep clean than conventional
enamel, if cleaned regularly.
The steam inlets are located at the rear
left corner of the roof of the oven.
The FlexiClip telescopic runners also
have a PerfectClean finish.
Moisture plus is activated during Auto-
matic programmes and can also be
used as an separate function for
manually injecting bursts of steam.
PerfectClean surfaces have an
iridescent appearance.
See "Cleaning and care" for more
information.
Auto sensor
This sensor controls
– The cooking duration of the automat-
ic programmes. This will be indicated
in the display.
– The cooling fan run-on time.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Door contact switch
Information about the
Automatic programmes,
baking, roasting, grilling ...
If the door is opened during operation,
the door contact switch automatically
switches off the heating elements, and
the fan if a "Fan" setting is being used.
The User instruction booklet, supplied
with your oven in addition to these
Operating and installation instructions,
contains detailed information about the
following:
This helps reduce the amount of heat
lost from the oven interior, e.g. when
checking food.
– Automatic programmes
– Baking
Vented oven door
– Roasting
The oven door is an open system and
the door panes have a heat-reflecting
coating. During operation, cool air is
passed through the oven door to keep
the outer pane cool.
– Slow cooking
– Grilling
– Defrosting
– Cooking ready meals
– Automatic programme recipes
The door can be dismantled for
cleaning.
"Moisture plus" recipe booklet
See "Cleaning and care" for more
information.
This separate booklet supplied with
your oven in addition to these
Operating and installation instructions,
contains recipes and information on
using Automatic programmes with
Moisture plus and the Moisture plus
function.
Energy efficiency rating
according to EN 50304
This appliance has been rated with an
energy efficiency class in accordance
with EN 50304. Tests were carried out
using “Fan plus U” without the
FlexiClip telescopic runners. The
catalyser should be switched off during
testing (see “Settings – Catalyser – Off
next programme only”).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Accessories
The following accessories are supplied
with this oven.
These and other accessories are also
available to order from the Miele Spare
Parts Department, your Dealer or via
Universal tray and rack with anti-tip
safety notches
The universal tray and rack are inserted
into the oven between the two rails of a
shelf runner.
When pushing the rack back in,
always ensure that the safety
notches are at the rear of the oven
(see illustration).
The universal tray and rack have
non-tip safety notches which prevent
them being pulled right out when they
only need to be partially pulled out.
They can then only be taken out of the
oven by raising them upwards and then
pulling them out.
If you are using a tray with the rack on
top, insert the tray between the rails of
a shelf runner and the rack will sit on
top of it.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
FlexiClip telescopic runners
Fitting the FlexiClip telescopic
runners
The telescopic runners are fitted in
between the two rails that make up a
shelf level.
The telescopic runner with the Miele
logo is fitted on the right.
The FlexiClip telescopic runners can be
clipped into any of the existing shelf
runners.
When fitting the telescopic runners
do not extend them.
Push the telescopic runners right in
before placing a tray or rack on
them.
To prevent the risk of a rack or tray
sliding off the runners, make sure that
they are sitting securely on their
runners in between the stoppers at
either end of each runner.
^ Fit the telescopic runner in between
the two rails at the front (1) and then
push it into the oven compartment
(2).
^ Then secure the telescopic runner to
the bottom of the two rails as
illustrated (3).
If the telescopic runners are difficult
to pull out after fitting, you may need
to pull firmly on them once to release
them.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Rotisserie
^ To remove a FlexiClip runner so that
you can clip it into another shelf
For grilling thicker items such as rolled
meat, poultry and kebabs.
runner, for example, lift it at the front
and then pull it out along the rail of
the oven shelf runner, as illustrated.
The rotisserie fits into the universal tray
for grilling or roasting. The universal
tray is placed into the oven on the first
runner level and this automatically
engages the rotisserie. The grill motor
will then start up and turn the rotisserie.
Food is grilled evenly on all sides as it
rotates.
Make sure that the oven has cooled
down before fitting the FlexiClip
runners.
Danger of burning.
Food probe
Opener
This appliance is supplied with a
wireless food probe.
This opener is used to remove the
cover of the lighting in the sides of the
oven.
The food probe is stored in a holder in
the door when not in use.
Descaling tablets
Replace the probe in its holder after
each use. Make sure that it is
inserted into the holder correctly as
otherwise it could be damaged
when the door is closed.
Plastic tube with clip
See "Food probe" for detailed
information on how to use it.
These are required for descaling the
appliance.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Miele@home
Miele@home enabled appliances send information via the household wiring
network cto the master appliance d / e about the operational status of the
appliances, as well as information about the progress of the programme.
These instructions are for a
Optional accessories
communication enabled oven b that
can be linked into the Miele@home
system via a communication module a
(optional accessory).
– Required: Communication module
XKM 2000 SV a
– Optional: Mobile master unit
InfoControl XIC 2100 e
Information is displayed via:
Both of these are supplied with their
own installation and operating
instructions.
– SuperVision appliance d
The status of other appliances in the
system can be shown in the display
of the SuperVision appliance.
The home of the future
– InfoControl XIC 2100 e
Information transmitted from the
appliances can be displayed
accoustically and optically in a
mobile master unit in the vicinity of
the house.
The Miele@home system is capable of
expansion. In the future,
communication enabled appliances b
will be able to be operated via a PC or
a mobile phone.
You can use both of these at the same
time.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
The appliance is operated via the display c and the electronic sensors next to
and below the display. These react to finger contact. A keypad tone will sound
each time a sensor is touched. The volume of the keypad tone can be adjusted or
switched off altogether (see "Settings - Volume").
Sensors
Meaning
a
b
C
Sensors
When the appliance is switched on, the allocations for these sensors
appear in the display.
K
ON/OFF sensor
For switching the appliance on and off.
c
d
Display
U
Clear sensor
To delete the latest entry.
e
N
Minute minder (egg timer) sensor
For entering a time for the minute minder, e.g. for boiling eggs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Display
Main menu
All information about functions,
temperature, cooking durations, Auto-
matic programmes and settings is
shown in the display.
ß Fan plus
ß Conventional heat
ß Full grill
After the appliance has been switched
on, the Main menu appears in the
display with a list of options available:
ß Pyrolytic
ß Defrost
ß Lighting
ß Economy grill
ß Fan heat
ß Moisture plus
ß Intensive bake
ß Top heat
ß Auto roast
ß Fan grill
ß Bottom heat
ß Descale
ß Automatic
ß Slow cooking
ß User programmes
ß Settings J
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
Symbols
The following symbols will appear in the display in addition to the text:
Symbol Meaning
!
Appears beside an option and is allocated to a sensor C. You select
the option you want by touching the sensor beside the dot.
A maximum of 3 options can be shown in the display.
These arrows indicate if more than three options are available.
You can scroll up % or down ( in the list by touching the appropriate
sensor.
p
ZZZZZZZ The end of a list is indicated by a dotted line. By scrolling down further,
you reach the beginning of the list again.
+ and - For increasing or decreasing the time or temperature shown in the
display.
(
:
A tick will appear beside the option which is currently selected.
This indicates additional information that is available.
This information window can be deleted by selecting OK.
The system lock is "Permitted".
On = Operation not possible.
Off = Operation possible.
0
1
N
A minute minder time has been set.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls
When a function is selected, the following symbols may appear in the display,
depending on setting:
Symbol Meaning
T
S
Duration
Finish
R
O
Start time
Programme finished
R
3
Q
U
O
d
[
V
W
X
P
Y
Z
\
c
T
^
Rapid heat-up phase, Rapid searing phase
Heating-up phase, Searing phase
Core temperature when using the food probe
Fan plus, Fan heat
Intensive bake
Moisture plus
Auto roast
Conventional heat
Top heat
Bottom heat
Defrost
Full grill
Economy grill
Fan grill
Automatic programme, Slow cooking
Lighting
Pyrolytic
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Your oven has a range of oven functions for preparing a wide variety of recipes.
Function
Fan plus
Notes
– For baking and roasting.
– You can bake and roast on two levels at the same time.
– Lower temperatures can be used than with "Conventional
heat" as the Fan plus system distributes the heated air
around the food.
Fan heat
– For baking and roasting on one level.
Intensive bake
– For cooking dishes which require a moist topping and a
crisp base such as pizza and quiche lorraine.
– Intensive bake is not suitable for baking thin biscuits etc. or
for roasting as the juices will become too dark.
Moisture plus
Auto roast
– For baking and roasting with moisture injection.
– For roasting.
During the searing phase, the oven is heated up to a high
temperature (230 °C) to sear the meat.
Once this temperature has been reached, the temperature
of the oven is automatically lowered to the set cooking
temperature (continued roasting temperature).
Conventional
heat
– For baking traditional recipes, e.g. fruit cake, casseroles.
– Also ideal for soufflés.
– If using an older recipe or cookbook, set the oven
temperature for Conventional heat 10°C lower than that
recommended.
The cooking duration does not need to be changed.
Bottom heat
– Use this setting towards the end of baking, to brown the
base of a cake, quiche or pizza.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Function
Full grill
Notes
– For grilling larger quantities of thin cuts (e.g. steaks).
– For browning food in larger dishes.
– For grilling smaller quantities of thin cuts (e.g. steaks).
– For browning food in smaller dishes.
– For grilling larger items, e.g. rolled meat, poultry.
Economy grill
Fan grill
– The hot air from the grill is distributed over the food by the
fan. This enables a lower temperature to be selected than
when using "Full grill"/"Economy grill".
Defrost
– For the gentle defrosting of frozen food.
Automatic
– The list of Automatic programmes available will appear in
the display.
Slow cooking
– For cooking meat or poultry over a long period of time.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To enter the basic settings
Setting the time of day
The oven will switch on automatically
when it is connected to the electricity
supply.
You will then be asked to enter the time
of day. The hour is highlighted.
^ Use the sensor next to + to enter the
hour, confirm with "OK" and then
enter the minutes in the same way.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested Time display
to select some basic settings which are
You will then be asked when you want
needed before the appliance can be
used.
the time of day to show in the display:
ß On
Follow the instructions in the display.
The time is always visible in the
display.
Setting the language
ß On for 60 seconds
The time is only ever visible for 60
seconds.
The welcome screen will be replaced
by the request to set a language:
^ Keep pressing the sensor to the right
of the arrows until the language
required appears in the display.
ß Do not display
The time only shows in the display
when the oven is being operated.
^ Touch the sensor to the left of the
language you want.
^ Touch the sensor to the left of the
setting you want.
A tick L will appear beside the
language you have selected.
After you have confirmed your selection
with "OK", the display will show
messages to tell you that:
^ Confirm by touching the sensor next
to "OK".
– your appliance is equipped for the
Miele|home system.
Clock format
– your appliance has been success-
fully set up to use it for the first time.
The request to select a Clock format will
appear. The default setting for the clock
is 24 h.
As soon as you confirm this last
message with "OK", your appliance is
ready for use.
^ Touch the sensor to the left of the
clock format required.
A tick L will appear beside the clock
format you have selected.
If you have selected the wrong
language by mistake proceed as
described in "Settings - Language"
to get back to the correct language.
^ Confirm with OK.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Calibration of the Auto sensor
^ Touch the sensor next to "Fan plus".
The built-in auto sensor will start to
calibrate after the setting up process
has been completed. A message to this
effect will appear in the display. The
process takes approximately five
minutes. During this time, the sensor
sets itself according to conditions in the
oven.
The recommended temperature of
160 °C will appear highlighted.
The oven will start to heat up.
^ Use the sensor next to + to increase
the temperature to 250 °C (the
highest temperature).
^ Touch the sensor next to "OK".
^ Heat the empty oven for at least an
hour.
Cleaning and heating up for
the first time
Please ensure the kitchen is well
ventilated during this operation.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
Before use, please remove
–
any stickers from the floor of the
oven, universal tray etc.
any protective foil from the oven
–
front.
This procedure can be set up to switch
itself off automatically. See "Operation -
Entering duration, start time or finish".
See "Cleaning and care" for more
information.
Before using the oven for the first time
^ Leave the appliance to cool down to
room temperature.
– take all accessories out of the oven
and wash them.
^ Then wipe the oven interior out with a
solution of hot water and a mild
detergent and then dry it thoroughly
with a soft, clean cloth.
– then heat the oven up once with
nothing in it. New ovens have a
slight smell on first use and this will
dissipate the smells before you use it
to cook food.
Leave the oven door open until the
oven interior is completely dry.
^ Before heating the oven up it is a
good idea to wipe the interior out with
a damp cloth. This way any dust or
bits of packaging that may have
accumulated in the oven cavity
during storage and unpacking will be
removed.
^ Touch the K sensor.
The appliance will switch on and the
main menu will appear in the display.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Automatic programmes
Each of the above Automatic
programmes has a sub-menu with
further options.
Your oven has a wide range of Auto-
matic programmes to enable you to
achieve excellent results with ease.
Each step you need to take before
starting the Automatic programme will
appear in the display.
You can call up the Automatic
programmes by selecting the "Automat-
ic" option from the main menu.
Depending on the programme you
have selected, further information or
prompts will appear regarding
^ Switch the oven on with the K
sensor.
– the roasting or baking dish,
– the shelf level,
^ Select "Automatic".
A list will appear in the display.
ß Cakes
– the use of the food probe,
– the amount of water required for
programmes with Moisture plus.
ß Baked goods
ß Bread
– the cooking duration.
ß Bread mixtures
ß Bread rolls
ß Pizza
Please refer to the "User instructions"
booklet and the "Moisture plus" recipe
booklet supplied with your oven for
more information on the Automatic
programmes and a selection of recipes.
ß Meat
ß Game
ß Poultry
ß Fish
ß Bakes/gratin
ß Frozen food
ß Reheat
(Reheating plated meals)
ß Dessert
ß Slow cooking
ß Sabbath programme
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
SpeedLight during the
heating-up phase
Manual operation
If you do not want to use an Automatic
programme you can enter the settings
for a cooking programme manually.
^ Place the food in the oven.
^ Switch the oven on with the K
sensor.
^ Select the required function and set
the temperature.
The oven will start heating, and the
cooling fans will switch on.
As soon as the oven is started, the
SpeedLight lights up yellow. The rising
temperature is shown by the change in
the colour of the light from yellow via
orange to red.
At the end of the cooking programme:
^ Switch the oven off and remove the
food.
Cooling fans
When the required temperature is
reached, the SpeedLight turns red. As
soon as the temperature drops below
the set temperature, the colour of the
light changes accordingly.
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
You can change the default setting for
this (see "Settings - SpeedLight").
The fans are sensor-controlled, and will
switch off automatically.
You can change this standard default
setting. See "Settings - Cooling fan
run-on".
Change
Selecting "Change" brings up all the
options which can be changed, e.g. the
selected temperature.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Selecting a function
^ Switch the oven on.
Recommended temperature,
Selecting the temperature
As soon as you have selected a
function, the recommended
You will hear a polyphonic tune.
^ Select the function required.
temperature with the temperature
range which can be set in brackets
beside it will appear in the display.
After selecting an oven function,
options which can be entered or
changed for the cooking programme
will appear in the display, e.g.:
The following recommended
temperatures are set at the factory:
ß Temperature
ß Duration
ß Start time
ß Finish
Fan plus . . . . . . . . . . . . . . . . . . . 160 °C
Fan heat . . . . . . . . . . . . . . . . . . . 160 °C
Auto roast* . . . . . . . . . . . . . . . . . 160 °C
Intensive bake . . . . . . . . . . . . . . 170 °C
Conventional heat. . . . . . . . . . . . 180 °C
Top heat . . . . . . . . . . . . . . . . . . . 190 °C
Bottom heat . . . . . . . . . . . . . . . . 190 °C
Fan grill. . . . . . . . . . . . . . . . . . . . 200 °C
Economy grill . . . . . . . . . . . . . . . 240 °C
Full grill . . . . . . . . . . . . . . . . . . . . 240 °C
Defrost . . . . . . . . . . . . . . . . . . . . . 25 °C
Moisture plus . . . . . . . . . . . . . . . 160 °C
ß Heating-up phase
(only with Fan plus, Auto roast and
Conventional heat)
ß Grill motor
(only with Economy grill, Grill and
Fan grill.)
* Initial searing phase temperature
approx. 230 °C, then drops to 160 °C
for continued roasting
ß Moisture reduction
ß Change function
If the recommended temperature is
suitable for your recipe, confirm it with
"OK".
If it is not suitable, you can change it for
this particular cooking programme.
You can also change the
recommended temperature for a
function permanently if you wish. See
"Settings - Recommended
temperature".
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Entering the duration, start
time or finish
Automatic switch-off
To switch a programme off
automatically enter the Duration or the
Finish time.
By entering the duration, start time or
finish time, the cooking process can be
programmed to switch off, or on and
off, automatically.
Delaying the start with Automatic
switch-off
ß Duration T
To switch a programme on and off
automatically you can either:
– Enter the Duration and Finish time, or
– Enter the Start time and the Duration,
or
Enter the cooking duration you require.
Once the duration set has elapsed, the
heating will switch off automatically.
The maximum duration which can be
set is 12 hours.
– Enter the Start time and the Finish
time.
The time which has not been entered is
calculated automatically.
ß Start time R
ß Finish S
You can set the Start time and Finish to
specify when you want cooking to start
or finish. The oven will switch on or off
automatically at the time you have set.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Sequence of a time-controlled
cooking programme, Using the
residual heat
At the end of the cooking programme
– The oven heating switches off.
– "Programme finished" and the O
symbol appear in the display.
The Start time will be shown in the
display up until the heating is switched
on.
– A polyphonic tune will play.
– The cooling fans will continue to run
for a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the
control panel or in the oven housing
unit.
During the course of the programme,
you can follow the temperature
increasing in the display until it
reaches the set temperature. A
polyphonic tune will play when the set
temperature is reached.
The fans are sensor-controlled and
will switch off automatically. You can
change this standard default setting.
See "Settings - Cooling fan run-on".
Then the Time left until the end of the
programme will appear in the display.
The heating in the oven switches off
shortly before the end of the cooking
programme. Residual heat (Energy
saving function) is then used. "Energy
save phase" will appear in the display.
The residual heat in the oven is
sufficient to complete the cooking
process.
Switch the oven off at the end of the
programme.
Changing or deleting an entered
cooking time
Selecting "Change" brings up all the
options which can be changed.
The cooling fans continue to run, as do
the hot air fans if a "fan" setting had
been chosen.
^ Select the option you want and
change it.
Use the U sensor to delete the entered
times.
If there is a power cut, all data entered
will be deleted.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Changing the heating-up
phase
Pre-heating the oven
Most dishes can be placed in a cold
oven. They will then make use of the
heat produced during the heating
phase.
The "Heating-up phase" option will
appear with the Fan plus, Auto roast
and Conventional heat functions.
It is only necessary to pre-heat the oven
in certain instances:
These functions all have a Rapid
heat-up phase where the the top and
ring heating elements come on together
with the fans to enable the oven to
reach the required temperature as
quickly as possible.
With Fan plus
– pre-heating may be necessary for
foods which cook in less than
20 minutes and for foods such as
puff pastries and yeast mixtures
where instant heat is required to
make them rise quickly.
The Rapid heat-up phase should not
be used for some items such as
pizza, biscuits and small cakes
because they will brown too quickly
from the top.
– roasting beef/fillet.
With Conventional heat
– it is usually necessary to pre-heat the
oven.
To switch the Rapid-heat up phase
off for a cooking programme select
the "Heating-up phase" option and then
select "Normal".
The Rapid heat-up phase should be
switched off when baking pizza,
biscuits and small cakes. Otherwise
they will brown too quickly from the
top.
Please note, only "Heating-up phase"
will appear in the display.
The Rapid heat-up phase will also be
switched off if a temperature of below
100 °C is set initially and the
temperature is then increased
afterwards.
You can also switch off the Rapid
heat-up phase permanently. See
"Settings - Heating-up phase".
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Activating moisture reduction
Change function
It is a good idea to use this function
You can change the function selected
when cooking items which are moist on via this option.
the inside but which should be crispy
The times already entered will be kept.
on the outside, e.g. frozen chips,
croquettes or pork with crackling.
It is also suitable for deep filled fresh
fruit cakes, such as plum or apple
cake.
You can activate Moisture reduction
with any function.
For best results, activate it at the
beginning of the cooking
programme.
^ Place the food in the oven.
^ Select the required function and set
the temperature.
^ Touch the OK sensor.
The list of options will show in the
display.
^ Select "Moisture reduction" and
confirm with "On".
The Moisture reduction function
needs to be activated individually for
each cooking programme.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
User programmes
The User programmes menu
Up to 25 frequently used recipes can be If user programmes have already been
saved under a user-defined name, and
then called up again as required.
created and saved, the following will
appear:
Either
ß Select
– Select the Save as option at the end
of running an Automatic programme
and give the programme a name of
your choice, or
For calling up and starting a user
programme.
You choose whether the programme
should "Start now" or "Start later".
– Select the User programmes menu
and enter up to 4 cooking steps
which you can then save to a name
of your choice.
ß Create
For creating your own user
programme.
ß Change
For altering an existing programme.
ß Delete
Existing programmes can be
deleted.
ß Use in main menu
You can place up to three existing
programmes in the Main menu.
When doing this you can allocate the
programme to a specific position at
the end of the Main menu.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
To create a User programme
After confirming with "Continue", select
an existing name from the list in the
display, or enter your own name. To do
this:
If programmes already exist under User
programmes, the "Create" option has to
be selected in order to save additional
programme stages to memory.
^ Select the letters or numbers by
touching the sensors beside the
arrows ) *.
^ Select and confirm the cooking
function you want.
^ When the letter or number you want
is highlighted, confirm it with "Select
character". It will then appear in the
top line of the display after "Name".
^ Alter and confirm the pre-set
recommended temperature if
required.
^ Select a duration, or a core
temperature if using the food probe,
and confirm your selection.
^ Select the rest of the letters or
numbers for your programme name.
You can use the "Delete character"
option to correct any wrong entries.
^ You can add more cooking stages,
for example, if you want to add
another cooking function to follow on
from the first.
Select "Space" where a space is
required.
Proceed as described above.
^ Confirm the programme name with
"Confirm name".
^ Finally set the shelf level to be used.
A summary of the entries will appear in
the display. If you wish to change any
of the stages listed you can select them
now.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Food probe
The core temperature value is
transmitted by radio signal from the
food probe handle to a receiver in the
back panel.
Using the wireless food probe enables
the temperature during the cooking
process to be monitored simply and
accurately.
Accurate transmission is only possible
when the door is shut.
If the oven door is opened during the
cooking programme, e.g. to baste the
meat, then the radio signal is
interrupted. It will resume once the door
has been closed. It will take a few
seconds for the current core
temperature to show up in the display
again.
How the food probe works
The metal tip of the food probe is
inserted into the food. There is a
temperature sensor in the metal tip
which measures the core temperature
of the food during cooking. The rise in
the core temperature reflects the extent
to which the food is cooked.
If the food probe is not being used,
it must not be left in the oven during
a cooking programme. The
You can programme the core
temperature to be lower or higher,
depending on whether you want your
meat to be medium or well done.
temperature sensor will be
destroyed at temperatures over
100°C.
For this reason, the food probe
should be replaced in its holder in
the door when it is not being used.
It will not be damaged when it is
inserted into the food, as it is only
possible to select core temperatures
between 30°C and 99°C.
The core temperature can be set within
a range of 30 to 99 °C. Refer to the
Roasting chart in the User instruction
booklet for the core temperature range
applicable for different types of meat.
The core temperature is
pre-programmed into the automatic
programmes.
The rise in the core temperature can be
followed in the display once the
heating-up phase has finished and the
core temperature has risen above
15°C.
The cooking programme will stop
automatically once the core
temperature you have set for the food
has been reached.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Food probe
Applications
Do not use the food probe to lift or
carry the food. Danger of breaking.
Apart from Automatic programmes, the
food probe can be used with the
following functions:
Note:
ß Auto roast
ß Fan plus
ß Moisture plus
ß Conventional heat
ß Fan grill
ß Slow cooking
– The metal tip of the food probe must
be fully inserted into the centre of the
food. The handle should be angled
upwards towards the corners or the
door of the oven. Make sure it is not
horizontal.
Important notes about using
the food probe
,To ensure optimum results,
please observe the following
instructions.
Avoid:
– Do not use deep, narrow, metal
cooking containers, as these will
disturb the radio signal.
– Do not place any metal items above
the food probe, such as lids,
aluminium foil, racks or baking trays
on a shelf level above the food with
the food probe.
– When cooking poultry, insert the
metal tip into the thickest part of the
breast.
– Do not let the metal tip touch any
bones or insert it into a particularly
fatty area of the meat. If fat or bone
come into contact with the probe,
this can lead to the oven being
switched off too early.
Glass lids may be used.
– Do not use a second standard food
probe made of metal at the same
time.
– Do not allow the handle of the food
probe to sit in any sauce or cooking
liquid, or to rest on the food or on the
edge of the cooking container.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Food probe
– If the meat is very heavily marbled
with fat, select the highest core
temperature given in the roasting
To use the food probe
^ Prepare the food in the usual way.
chart in the User instructions booklet. ^ Remove the food probe from its holder
in the door.
– When using roasting bags, insert the
probe through the bag into the
centre of the meat. You can also
place the meat, with the food probe
inserted, inside the foil. Follow the
roasting bag / aluminium foil
^ Insert the metal tip fully into the food.
The handle should be angled
upwards.
^ Place the food in the oven and close
the door.
manufacturer's instructions.
^ Select the oven function or Automatic
programme.
– If wrapping the meat in aluminium
foil, the food probe must be inserted
through the foil to the centre of the
meat.
^ Alter the recommended temperature
if necessary
^ Alter the recommended core
temperature of 60°C, if required.
– When cooking very flat food such as
fish, the food probe will need to be
inserted almost horizontally. Place
fish in an oven-proof glass or
ceramic container, as the sides of a
metal dish will disturb the radio
signal.
The core temperature is
pre-programmed into the automatic
programmes.
You can also delay the start of the
cooking programme to a later time.
Select the "Start time" option or if using
an Automatic programme, the "Start
later" option.
If an error message comes up in the
display to indicate that there is no
contact between the transmitter and
the receiver, reinsert the food probe
into a different part of the food.
Time left display
After a certain time the estimated time
remaining (i.e. the time left to run),
appears in the oven display.
The actual core temperature is no
longer displayed and cannot be called
up.
The time remaining is calculated from
the oven temperature selected, the
required core temperature and the
pattern of the increasing core
temperature.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Food probe
The time remaining first shown is an
estimate. As the cooking process
continues the time remaining is revised
continuously, and a more accurate
revised figure shown.
When the core temperature selected
has been reached,
– the oven switches off automatically.
– the message "Programme finished"
and the O symbol appear in the
display.
If, while the time remaining is showing
in the display:
– a polyphonic tune plays.
– the oven or core temperature is
altered,
If the food is not yet cooked sufficiently,
insert the food probe into another place
and repeat the programme.
– or a different oven function is
chosen,
– or the door is left open for a
particular length of time
all the time remaining information will
be cancelled and the actual core
temperature will re-appear in the
display. The time left display will
reappear after a while.
If the door is opened during an auto-
matic programme the time remaining
will continue to show in the display.
Using the residual heat, Energy save
function
The heating in the oven switches off
shortly before the end of the cooking
programme. The residual heat in the
oven is sufficient to complete the
cooking process.
Using the residual heat in the oven
saves energy.
"Energy save phase" will appear in the
display to show that the oven is in
Energy save mode. The time remaining
will continue to be visible in the display.
The cooling fans continue to run, as do
the hot air fans if a "fan" setting had
been chosen.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
The "Moisture plus" function uses a
steam injection system.
Moisture plus is activated with Automat-
ic programmes or you can select the
special "Moisture plus" function.
Water is taken in via the tube
underneath the control panel on the left.
The water is then injected as bursts of
steam into the oven compartment
during the cooking process.
,The steam injection system
should be rinsed through before you
use an Automatic programme with
Moisture plus or the Moisture plus
function for the first time.
The steam inlets are located at the rear
left corner of the roof of the oven.
Baking, roasting or cooking with
Moisture plus uses just the right amount
of steam and optimum air flow for very
even cooking and baking results:
delicious fresh bread with a glossy
crust; rolls and croissants as good as
the baker makes; tender, succulent
meat with a well browned finish;
perfectly finished oven bakes; delicious
soufflés and much more.
To do this, run the oven on the
"Moisture plus - 160 °C - Automatic
burst of steam" for about 30 minutes.
Please refer to the "Moisture plus"
booklet supplied with your oven for
further information and a selection of
recipes.
Moisture plus is not suitable for
mixtures which contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Automatic programmes
Night baking
Automatic programmes with Moisture
plus set the optimium temperature, the
degree of moisture and also the
duration automatically.
Some of the Automatic programmes for
bread and rolls have the option of
baking during the night, so that you can
enjoy freshly baked bread for breakfast
the next morning.
At the beginning of the programme you
will be prompted to allow a specified
amount of water to be drawn into the
oven.
The "Finish" option will appear when
you have selected the programme.
When "Finish" is selected, a finish time
will appear which is the cooking
duration for the programme plus five
hours. You can change this to the time
you want the bread to be ready at the
next morning.
The amount of water specified will be
more than the amount which is actually
needed which means that some of the
water will remain in the container as not
all of it will be drawn up into the oven.
The programme will control how many
bursts of steam are required and at
what point they are injected.
Follow the instructions which then
appear in the display.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Moisture plus function d
After selecting Moisture plus you need
to set the number of bursts of steam.
The options are:
When using the Moisture plus function
you will need to enter
– the temperature and
ß Automatic
– the number of bursts of steam.
You can also enter the cooking
duration, start time or you can use the
food probe.
This requires enough water for one
burst of steam. The burst of steam
will be injected into the oven
automatically after the heating-up
phase.
Number of bursts of steam and when
they are injected
Steam is injected for about
5 minutes.
ß 1 burst of steam
The number of bursts of steam and
when they are injected will depend on
the type of food being cooked:
ß 2 bursts of steam
ß 3 bursts of steam
The quantity of water required will
depend on the number of bursts of
steam.
– Dough mixtures will rise better if
steam is injected at the beginning of
the programme.
The earliest point at which steam can
be injected is after the heating-up
phase has been completed.
One burst of steam takes approx. 5
minutes to be injected into the oven.
It is a good idea to set the minute
minder to remind you when to inject
the bursts of steam required.
– Bread and rolls also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the programme will give the bread
and rolls a glistening crust.
– When roasting meat with a high fat
content injecting steam at the
beginning of roasting will draw out
the fat.
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
Please refer to the sample recipes in
the "Moisture plus" booklet.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Using Moisture plus d
^ Place the food in the oven.
^ Select Moisture plus d.
The amount of water required will be
drawn up into the oven. As the water is
taken in, bars will appear in the display.
The amount of water specified will be
more than the amount which is actually
needed which means that some of the
water will remain in the container as not
all of it will be drawn up into the oven.
^ Select Automatic burst of steam or
select the number of bursts of steam.
^ Select the temperature.
^ Fill a suitable container with the
quantity of water specified.
Automatic/
When you close the oven door, you will
hear the noise of the pump briefly.
– Automatic burst of steam
1 burst of steam: approx. 100 ml
2 bursts of steam:approx. 150 ml
3 bursts of steam:approx. 250 ml
^ Once the heating-up phase has been
completed, the automatic burst of
steam is injected and the water will
vaporise in the oven compartment.
^ Pull the fill tube forwards (located
below the control panel on the left).
Once the steam has been injected
successfully, the programme will
continue to the end.
– Injecting bursts of steam manually
Once the heating-up phase has
finished, the bursts of steam can be
injected at the intervals given in the
recipe.
Set the minute minder N as a reminder.
When it is time to inject steam:
^ Select "Change".
^ Select "Release a burst of steam".
^ Hold a container with the quantity of
water specified under the tube as
shown. Start the water intake process
with "OK".
The water will vaporise in the oven
compartment.
If more bursts of steam are required,
proceed as described above.
Once the steam has been injected
successfully, the programme will
continue to the end.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Moisture plus
Evaporate residual moisture
Descaling
If there is still water in the steam
injection system at the end of a
programme or if the programme is
cancelled, you will be prompted to
evaporate the residual moisture.
The oven will need to be descaled
depending on the number of cooking
programmes using Moisture plus which
have been run and the amount of water
taken into the oven for these.
The frequency of descaling also
depends on the water hardness level in
your area.
If you confirm the prompt immediately
with OK, the oven will heat up to
approx. 150 °C and the residual water
will evaporate.
A message to tell you to descale the
appliance will appear in the display.
How long this takes will depend on the
amount of water in the system.
You can start the descaling process at
any time by selecting "Descale" in the
main menu.
If you select "Cancel", the evaporation
of the residual water will not start imme-
diately.
If you do not carry out the descaling
process when the prompt to descale
the oven appears, you will only be able
to run functions and Automatic
However, you will then only be able to
run functions and Automatic
programmes without Moisture plus.
programmes without Moisture plus.
The evaporation of the residual water
process must be carried out before you
can use an Automatic programme with
Moisture plus or the Moisture plus
function.
See "Cleaning and care" for more
information about descaling.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Minute minder (egg timer) N
The minute minder can be used to time To cancel the time set for the
any activity in the kitchen, e.g. boiling
minute minder
eggs.
^ Touch the N sensor.
You can enter a time of up to a
^ Delete the minute minder time by
touching the U sensor.
maximum of 9 hours, 59 minutes and
59 seconds.
You can set the minute minder at the
same time as another timed
programme, e.g. as a reminder to stir a
dish or add seasoning etc.
To set the minute minder
^ Touch the N sensor.
"-:- -:- -" will appear in the display.
^ First enter the hours. Confirm your
entry with "OK". Then enter the
minutes, confirm with "OK", and finally
enter the seconds and confirm in the
same way.
You will then see the minute minder
time counting down in the display.
At the end of the time set for the minute
minder
– the N symbol will flash.
– a polyphonic tune will play.
– at the end of the minute minder time,
the display will show the time
counting upwards.
^ Touch the N sensor.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Your appliance is supplied with a
number of standard default settings.
You can select and change various
options via the "Settings J" menu.
Settings cannot be altered while a
cooking programme is in progress.
If a setting is not confirmed within a
certain time, the display will revert to
the "Settings" list.
Options in the Settings J menu:
ß Language J
ß Time
Language J
ß Lighting
You can set the language you want the
display to appear in.
ß Catalyser
ß Cooling fan run-on
ß Pyrolytic
After selecting and confirming
"Language", the language you have
selected will appear in the display.
ß Heating-up phase
ß Start
If you have selected the wrong
language by mistake, you can follow
the flag symbol J to get back to the
Language menu.
ß Recommended temperatures
ß Display
ß Volume
Time
ß SpeedLight
ß Safety
Display
(applies to the oven when switched off)
ß Units
ß On
ß Showroom programme
ß Factory default
The time is always visible in the
display.
The different options are described in
more detail below.
ß On for 60 seconds
The time is only ever visible for 60
seconds. It will reappear when the
oven is switched on and off.
ß Do not display
The time only shows in the display
when the oven is being operated.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Clock format
Catalyser
The time of day can be altered from a
24-hour display to a 12-hour display.
The oven is supplied with the catalyser
engaged for all functions.
If the catalyser is set to:
Setting the time of day
ß On
You cannot set the time of day while
a cooking programme is in progress.
it will work with all functions.
ß Off next programme only
Use + or - to enter the time of day. First
enter the hours and confirm with "OK".
Then enter the minutes and confirm
with "OK".
it will be switched off during the next
programme only.
Cooling fan run-on
If there is a power cut, the current time
of day will reappear once power has
been restored. The appliance will store
this data for approx. 200 hours. After
200 hours it will show "12:00" and will
need to be re-set.
The cooling fans will continue to run for
a while after the oven has been
switched off to prevent any humidity
building up in the oven, on the control
panel or in the oven housing unit.
The fans are sensor controlled, and will
switch off automatically.
Lighting
You can choose between the default
setting of the light coming "On for 15
seconds" and "On".
You can set the cooling fans to switch
off either when the temperature in the
oven is below approx. 70°C, or after a
period of approx. 25 minutes.
If you keep the default setting, the
interior lighting will switch off 15
seconds after the start of the cooking
programme. If you touch a sensor, the
light will come on again for another 15
seconds.
If you select "On", the light will remain
on during the entire programme.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Start
Do not leave food in the oven to
keep it warm if you have set the
cooling fans to timed operation.
Moisture levels in the oven could
increase, leading to condensation
forming on the control panel and
surrounding kitchen furniture and
drops of moisture collecting under
the worktop.
The "Automatic" setting enables a
programme to start automatically
approx. 20 seconds after making your
last entry without having to select Start.
If "Manually" has been selected, "Start"
will appear at the beginning of each
programme and must be confirmed
before the programme will start.
Condensate can
Recommended temperatures
–
damage the housing
unit/worktop.
If you frequently change a
recommended temperature it may be a
good idea to change it permanently.
–
lead to corrosion in the oven.
^ Select the function you want and
change the temperature within the
range allowed.
Pyrolytic
A message can be set to appear in the
display after a certain length of time to
remind you to run a pyrolytic cleaning
programme.
Display
You need to activate this message if
you wish to be reminded. Confirm the
option "With reminder".
The following features can be changed:
ß Contrast,
ß Brightness
Heating-up phase
The setting is represented by a bar with
seven segments. The middle setting is
represented by four illuminated
segments.
The Heating-up phase works as follows
with the Fan plus, Conventional heat
and Auto roast functions:
P P P P G G GM
ß Rapid
The setting required is selected by
increasing or reducing the number of
illuminated segments.
All the heating elements are
switched on together in order to heat
the oven up as quickly as possible to
the required temperature.
ß Normal
Only the heating elements for the
cooking function selected are
switched on.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Volume
ß Colour in standby mode
The colour of the Speedlight when
the appliance is switched off can be
changed.
ß Buzzer tones (polyphonic tune)
The volume of the polyphonic tune
can be changed.
P P P P G G GM
The colour is represented by a bar with
seven segments. If all of the segments
are illuminated, the lighting will be red.
If none of the segments is illuminated,
the lighting will be yellow.
ß Keypad tone
Each time a sensor is pressed there
is a beep. The volume of this beep
can be changed or the sound
switched off completely.
Safety
To switch off the tone or change the
volume
The system lock prevents the
appliance being switched on
P P P P G G GM
unintentionally, by children for example.
The volume is represented by a bar
with seven segments. If all of the
segments are illuminated, the volume is
set at maximum volume. If none of the
segments is illuminated, the sound is
switched off altogether.
It is deactivated as standard.
It has to be activated in order to use it.
To activate the system lock:
^ Select "System lock 0".
^ Select "Permitted".
SpeedLight
^ Switch the appliance off using the K
sensor.
ß In use
The SpeedLighting under the angled
fascia panel is switched on whilst the
appliance is in use, but can be
switched off if preferred.
The 1 symbol will appear in the
display, indicating that the system
lock can be used.
ß In standby mode
The lighting is switched on when the
appliance is switched off, but can be
switched off if preferred.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
To switch the system lock on or off
Showroom programme
^ Touch the sensor next to the 1
symbol.
This programme is for dealers who
want to demonstrate the appliance
without the heater elements working.
Do not activate this setting for domestic
use!
You can choose between:
ß On
The appliance cannot be operated.
If you select and activate this option by
mistake, you can deactivate it as
follows:
It has been locked.
0 appears in the display.
ß Off
ß Demo programme
Select the "Off" option and follow the
The appliance can be operated.
It has been unlocked.
1 appears in the display.
instructions in the display.
ß Continuous loop,
ß Demo mode
Touch one of the sensors next to the
The minute minder can still be used.
The system lock remains active even
after a power cut.
display and follow the instructions.
Factory default
If you select
Units
You can choose for the temperature to
be shown in °C or °F.
ß All settings
Any settings that you have altered
will be reset to the factory default
setting.
ß User programmes
All user programmes which have
been saved to memory will be
deleted.
ß Main menu
Only the main menu will be reset to
the factory default setting.
ß Recommended temperatures
Only those recommended
temperatures which have been
changed will be reset to the factory
default settings.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Miele branded cleaning and
conditioning products are available
from the Miele Spare Parts Department
or via the internet on
The external surfaces are
susceptible to scratching. Scratches
on glass surfaces could even cause
a breakage in certain
circumstances.
,Do not use a steam cleaner to
clean the appliance. The steam
could reach electrical components
and cause a short circuit.
Contact with unsuitable cleaning
agents can alter or discolour the
external surfaces.
To prevent damage to your appliance
when cleaning, do not use:
– cleaning agents containing soda,
ammonia, acids or chlorides,
Appliance front
– cleaning agents containing
descaling agents,
Remove any soiling immediately.
If not, it might become impossible to
remove and could cause the surface
to alter or discolour.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
Clean the front using a damp Miele
microfibre E-cloth or with a clean
sponge and a solution of hot water and
washing-up liquid. Wipe dry using a
soft cloth.
– solvent-based cleaning agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven sprays,
– glass cleaning agents,
– hard, abrasive sponges and
brushes, e.g. pot scourers,
– sharp metal scrapers.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Accessories
FlexiClip telescopic runners
Remove all accessories as well as
the runners and accessories such
as FlexiClip runners from the oven
interior before starting the pyrolytic
cleaning process. The high
Do not clean FlexiClip telescopic
runners in a dishwasher. This would
remove the special lubricant.
When cleaning the runners, do not
use:
temperatures needed for pyrolysis
will damage the accessories, and
the damage to the FlexiClip runners
could be irreparable.
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– stainless steel cleaning agents,
Universal tray
– hard, abrasive sponges and
brushes, e.g. pot scourers,
The surface has been treated with
PerfectClean enamel.
Please refer to the section on
"PerfectClean" for information on
cleaning and care.
When cleaning the runners be very
careful not to wash out the special
lubricant in them.
Avoid frequent:
Rack, runners
– soaking in hot soapy water,
– use of oven spray,
The surface has been treated with
PerfectClean enamel.
– cleaning of the bearings.
Treat in the same way as other surfaces
coated with PerfectClean. See
"PerfectClean".
FlexiClip telescopic runners are best
cleaned after each use.
This prevents soiling drying on or being
burnt on when the oven is used again.
Food probe
The food probe is dishwasher-safe.
If the runners are used frequently
without being cleaned, it may become
very difficult or even impossible to
clean them.
Rotisserie
Wash in hot water with a little
washing-up liquid.
If necessary a non-abrasive proprietary
stainless steel cleaner may be used for
stubborn soiling.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Normal soiling
Any residual oven spray left on the
FlexiClip runners could give off an
unpleasant smell when they are
heated.
Clean the surfaces of the runners using
a damp Miele microfibre E-Cloth or with
a clean sponge and a solution of hot
water and washing-up liquid. Wipe dry
using a soft cloth.
The runners may appear discoloured
or a lighter colour in places after they
have been cleaned. This will not
affect the functioning of the runners in
any way.
Remove any cleaning agent residues
thoroughly.
Heavy soiling
If necessary, the scouring pad on the
reverse of a non-stick washing-up
sponge can be used to clean the
runners. Cleaning may be easier if the
soiling is first dampened with a solution
of hot water and washing-up liquid for a
few minutes. If necessary, a
Note:
When baking cakes with moist toppings
or fillings e.g. fruit crumble, be careful
not to let them spill over. Should this
happen there is a danger of sticky fruit
juices adhering to the runners and
hindering or even preventing their
movement in and out of the oven.
Clean the runners as described above
and very carefully use a soft nylon
brush to clean the bearings inside the
runners.
non-abrasive stainless steel spiral pad
can be used.
For very heavy soiling the telescopic
runners can be soaked in a solution of
hot water and washing-up liquid for a
maximum of 10 minutes.
Oven cleaning sprays can be used if
absolutely necessary. However, only
use them on cold surfaces, and only
allow the spray to be in contact with
surfaces for a few minutes at the most.
Be careful to avoid getting oven spray
inside the runners.
Lubricating the FlexiClip telescopic
runners
If the lubrication on the telescopic
runners dries out, they can be
relubricated to ensure they continue to
run smoothly.
A special lubricant is available from
Miele.
Only use this special lubricant, as it
is designed to withstand high
temperatures in the oven.
Other lubricants can harden and
stick to the telescopic runners when
they are heated.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
PerfectClean
Normal soiling
The surface of the universal tray and
Clean as soon as possible after each
use with a dishcloth, soft sponge or a
the anti-splash insert has been treated
with a special type of enamelling called soft nylon brush, and a solution of hot
"PerfectClean".
water and a little washing-up liquid. The
longer soiling is left, the harder it may
become to remove.
This surface has very good anti-stick
properties and is much easier to keep
clean than conventional oven enamel, if
cleaned regularly.
Stubborn soiling
Stubborn soiling, e.g. from roasting,
may need to be soaked first with a
damp sponge to loosen it and if
necessary a non-abrasive stainless
steel spiral pad or a scraper suitable for
glass can be used to remove it.
Food can be taken off it more easily,
and soiling from baking and roasting is
easier to remove.
The following notes on cleaning and
care should ensure that the anti-stick
and easy clean properties of
After cleaning, rinse thoroughly with
clean water. The water must run off
the surface easily. Any residual
cleaning agents will hinder this
effect.
PerfectClean last for many years.
PerfectClean surfaces can be treated
as you would treat glass.
Food can be sliced or cut up on the
PerfectClean surface in the same way
as on a baking tray with conventional
enamel.
Using oven sprays on very stubborn
soiling
Allow the oven and any accessories
to cool down before cleaning.
Danger of burning.
Some oven cleaners contain strong
alkalines and/or abrasive materials.
Because PerfectClean enamel is
designed to be easily cleaned, the use
of these cleaners is not recommended.
However, if you still cannot get the
surface clean, an oven cleaner can be
used, but for a couple of minutes only.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Allow the PerfectClean surfaces to cool The following cause lasting damage
down to room temperature before
applying an oven spray.
to the surface structure and reduce
the anti-stick effect and must not be
used on PerfectClean surfaces:
Apply a spray oven cleaner to the
soiled areas. Leave to take effect for a
couple of minutes only!
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
If necessary use a soft sponge, soft
nylon brush or a scraper suitable for
glass surfaces to loosen the soiling.
– cleaning agents for ceramic hobs,
– wire wool or metal scourers,
Repeat the process if necessary.
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
After cleaning, rinse thoroughly with
clean water and then dry thoroughly.
For optimum performance of
PerfectClean enamel it is important to
clean the oven and accessories after
each use.
– oven spray must not be used in a hot
oven or left on for too long,
– PerfectClean enamelled items must
not be washed in a dishwasher.
The surfaces will become harder to
clean and the anti-stick properties will
deteriorate if soiling is not removed
after each use and allowed to build up.
In extreme cases cleaning may
become impossible.
Note:
– Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Excercise
caution and make sure the oven is
not too hot - danger of burning.
– Spilt fruit juices may cause lasting
discolouration to the surfaces. and
roasting can cause matt areas to
appear. Clean these following the
instructions given above and do not
use force to remove them. This
discolouration is permanent but will
not affect the efficiency of the
enamel.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Oven interior
Most cooking residues can be removed
with a damp cloth and a mild solution of
hot water and washing-up liquid.
The oven interior is coated with dark
pyrolytic enamel which facilitates
cleaning.
Never use hard brushes, hard
sponges, wire wool pads*, knives or
any other abrasive materials or
cleaning agents. They can damage
the enamel.
This is a particularly hard enamel with
an extremely smooth surface and very
good anti-stick properties.
Manual cleaning of the oven interior
If using an oven spray, the
manufacturer's instructions must be
followed.
Allow the oven to cool down before
cleaning by hand.
Danger of burning!
* Non-abrasive stainless steel spiral
pads can, however, be used.
The oven interior and the inside of
the door should be cleaned after
each use. If this is not done
To make cleaning easier
– remove the oven door,
– dismantle the door,
subsequent soiling from baking and
roasting will become worse and
make cleaning harder. In extreme
cases, heavy soiling could even
damage the surface.
– remove the FlexiClip telescopic
runners,
– take out the side runners,
– lower the top heating/grill element.
There is a fibre-glass door seal
around the oven cavity.
Instructions for doing so are given
further on in this section.
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing it
can damage it.
Pyrolytic cleaning of the oven
interior
Before starting a pyrolytic cleaning
process please note the following:
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
At the end of the programme it will not
be unlocked until the temperature
inside the oven has dropped to below
280 °C.
Remove any coarse soiling from the
oven before you start.
There is a fibre-glass door seal
around the oven cavity.
If the pyrolitic cleaning programme has
been started by mistake or if the
process is interrupted, the door lock will
be released:
This seal is particularly sensitive and
should not be cleaned unless
absolutely necessary. Rubbing can
damage it.
– immediately if the temperature is
below 280 °C.
Remove all accessories as well as
the runners, the FlexiClip runners
and any extra accessories from the
oven interior before starting the
pyrolytic cleaning process. The high
temperatures needed for pyrolysis
will damage the accessories.
– not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
Starting a pyrolytic process
^ Take all accessories out of the oven.
^ Select the "Pyrolitic" function.
^ Start the pyrolytic cleaning process.
The door will lock.
The oven door gets much hotter
during pyrolytic operation than
during normal use.
Make sure children cannot touch the
oven whilst a pyrolytic programme is
running. Danger of burning.
You can delay the start of the
pyrolytic process for example, to take
advantage of cheaper night electricity
tarifs. To do this:
During the pyrolytic process the oven is
heated to approx. 460 °C. Any residual
soiling is burnt off by the high
temperatures.
^ Select "Start time" and select a time
to start the programme at.
The pyrolytic programme duration will
vary depending on the level of soiling.
You can change the start time if you
wish at any time up until the delay
period has elapsed.
For safety reasons the oven door is
automatically locked at the beginning
of the pyrolytic programme.
At the end of the programme a buzzer
will sound and the message
"Programme finished" will appear in the
display.
^ Switch off the oven.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
After the pyrolytic process any debris The pyrolytic process will be
(e.g, ash), can easily be wiped away.
cancelled,
– if the oven is switched off.
Remember to wait until the oven has
cooled down before doing so!
Danger of burning.
– if another function is selected during
the pyrolytic process.
– in the event of a power cut.
Try not to wipe over the fibre-glass
seal when cleaning the oven cavity.
It is particularly sensitive and should
not be cleaned unless absolutely
necessary. Rubbing it can damage
it.
Switch the oven off if either of these last
two points apply.
If the oven interior temperature is below
280 °C, the door lock will be released
after a short while. It can then be
opened.
Most residues are easily wiped away
with a damp cloth.
Start the pyrolytic cleaning process
again if necessary.
Depending on soiling levels in the oven
there may be visible deposits on the
door and below the trim under the oven
cavity. This is best removed using a
non-abrasive sponge or non-abrasive
stainless steel spiral pad and a mild
solution of warm water and washing-up
liquid.
Deposits on the internal door panel can
be removed using a suitable glass
scraper.
Spilt fruit juices may cause lasting
discolouration to the surfaces. This
discolouration is permanent but will
not affect the efficiency of the
enamel. Do not attempt to remove
these marks.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the oven door
^ Then lift the door upwards as far as it
will go.
Take care when removing the door -
it weighs approx. 13.5 kg.
Do not attempt to take the door off
the hinge guides when it is in a
horizontal position. The guides will
close, and damage the appliance.
Danger of injury.
The oven door is connected to the oven
by hinges.
Before removing the door, the locking
clamps on both hinges have to be
released.
^ Open the door fully.
^ Hold the door securely at both sides
and lift upwards off the hinge guides.
Do not lift the door off by the handle.
The handle could break and
damage the door.
^ To release the locking clamps on the
hinges turn them upwards as far as
they will go until they are at an angle.
See illustration.
Make sure that you lift the door off
equally on both sides.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To dismantle the oven door
Always remove the oven door before
dismantling it.
The oven door is made up of four
panes of glass and has vents at the top
and bottom.
^ Place the door on a protective
surface (e.g. on a table cloth) to
prevent it getting scratched. The
door handle should line up with the
edge of the table. Make sure the
glass lies flat and does not get
broken during cleaning.
When the oven is operating, air is
circulated through the door to keep the
outer pane cool.
If condensate has worked its way in
between the glass panes, the door can
be dismantled in order to clean in
between the panes.
Do not use scouring agents, hard
sponges or brushes or sharp metal
tools to clean glass as these can
scratch the surface. Scratches can
cause the glass to break.
Do not use an oven spray. This will
damage the surface of the
aluminium surrounds.
^ Flip the glass pane retainers
outwards to open them.
Ensure that the glass panes are
inserted the correct way round after
cleaning, as each side of the pane
has a different coating. Those facing
the oven interior reflect the heat.
To avoid the risk of breakage, it is
advisable to place the panes on a
table protected by a soft cloth (e.g.
a towel).
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
You can now remove the inner and the
two middle panes.
^ Now gently lift up the upper of the
two middle panes and remove it.
^ Gently lift the inner pane up and pull
out of the cover strip.
^ Gently lift up the lower of the two
middle panes and remove it.
^ Remove the glass fibre seal. To do so
pull the ends out of the fixings at the
side.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Clean the glass panes and other
components with a Miele E-cloth or a
clean sponge and a solution of hot
water and washing-up liquid. Wipe
dry using a soft cloth.
When refitting the lower pane, the
more angled corner must be
inserted in the left hand retainer at
the bottom.
The fibre-glass seal is particularly
sensitive and should not be cleaned
unless absolutely necessary.
Rubbing it can damage it.
^ To refit the door:
The two middle panes are identical.
To ensure they are refitted correctly,
one of the corners is more angled
than the others.
^ Replace the first of the middle panes.
The more angled corner must be at
the bottom left.
When refitting the upper pane, the
more angled corner must be
inserted at the top left.
^ Replace the second of the middle
panes with the more angled corner at
the top left.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
^ Flip the glass pane retainers inwards
to close them.
^ Refit the fibre-glass seal by feeding
the ends back into the side fixings.
^ Push the inner pane into the plastic
strip and insert it in the retainers.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To refit the door
^ Open the door fully.
^ Flip both locking clamps back up as
far as they will go into a horizontal
position.
It is essential that the clamps are
locked after refitting the door.
Otherwise the hinges could work
loose, resulting in damage to the
door.
^ Hold the door securely at both sides
and carefully fit it back onto the hinge
guides.
Make sure that the door goes back
on straight.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To remove the FlexiClip
telescopic runners
To remove the side runners
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
^ Lift the FlexiClip runner up at the front
and pull it out along the rail.
Refit the runners carefully as
described in "Features".
^ Pull the runners forwards out of the
holder and remove.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
To lower the top heat/grill
element
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
^ Remove the runners.
^ Unscrew the wing nuts and lower the
top heating element.
Do not use force to pull it down as
this can cause the element to break.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Make sure that the wing nuts are
screwed back on properly.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Descaling
A plastic tube (with clip) is supplied
with your oven so that you do not
have to hold the container with the
descaling agent underneath the
water intake tube.
Only use the descaling tablets
supplied with the appliance. These
have been specially formulated and
are available from the Miele Spare
Parts Department or via the internet
Other types of descaling agents will
damage the oven.
Follow the instructions on the
package carefully to avoid
damaging the oven.
Clean the oven interior after
descaling to ensure that all traces of
descaling agent have been
removed.
^ Attach the plastic tube to the end of
the water intake tube. Place the other
end in the bottom of the descaling
solution container, and secure the
plastic tube to the container with the
clip.
The descaling process takes about
90 minutes. Follow the instructions in
the display.
^ Close the door.
^ Dissolve one descaling tablet in
approx. 600 ml of cold mains tap
water.
^ Start the suction process with the
sensor next to "OK".
The progress of the descaling process
will be indicated by illuminated
segments in the bar in the display. You
can hear the pump.
^ Place the universal tray on the top
shelf level to collect the descaling
solution after it has been used.
^ Select the "Descale" option.
The amount of solution specified can
be more than the amount which is
actually taken in, which means that
some of the solution will be left in the
container at the end of descaling. Top
the container up with approx. 300 ml of
water, as the system will need to draw
in some more liquid during the
activation phase.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Once the descaling solution has been
drawn into the appliance
^ Start the first rinse.
^ Repeat twice.
– "Activation phase" will appear in the
display. The activation phase takes
approx. 60 minutes.
Empty the universal tray before the
second and third rinse.
– the time left for the activation phase
will be shown counting down in the
display.
After the third rinse, residual water will
need to be evaporated from the steam
injection system.
The system will take in more liquid at
approximately five minute intervals. You
will hear the noise of the pump for a
moment or so.
Before proceeding, remove the
plastic tube and the container from
the oven.
The oven lighting and the cooling fan
will remain on during descaling.
The oven will heat up to "Evaporate
residual moisture". You can follow the
time in the display.
The steam injection system will need to
be cleaned at the end of the
Allow the oven to cool down before
cleaning by hand. Danger of
burning.
descaling process to remove all traces
of descaling solution.
Prompts to do this will appear in the
display.
^ Remove the universal tray and empty
it. Clean the oven interior to remove
any condensation and descaling
agent residue.
Cleaning is carried out by flushing
approx. 1 litre of mains tap water
through the system. The water is
collected in the universal tray. This
process is repeated three times.
Leave the oven door open until the
oven interior is completely dry.
^ Take the universal tray out of the
oven and empty it. Place the tray
back in the oven again at the top
shelf level.
^ Unclip the plastic tube from the
container. Rinse out the container
and fill with approx. one litre of mains
tap water. Place the container in the
oven, insert the plastic tube and
secure it to the container with the
clip.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
,Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person in strict accordance with current national and
local safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
Ensure current is not supplied until after maintenance or repair work has been
carried out.
Problem
Possible cause and remedy
The oven does not – Check if the system lock has been activated.
heat up.
– Check whether the demo mode has been activated (see
"Settings - Showroom programme").
– Check whether the mains fuse has tripped. If it has,
contact a qualified electrician or Miele.
The heating works Light in the roof:
but not the oven
The halogen lamp needs replacing.
lighting.
^ Disconnect the appliance from the electricity supply.
Switch off and unplug at the socket, or remove the fuse,
or switch off at the isolator as appropriate.
^ Unscrew the lamp cover and the seal.
^ Change the halogen lamp.
When purchasing a new lamp, take the old one with you
to make sure you obtain the correct replacement (Osram
66275, 230 V, 25 W, G9, heat resistant to 300 °C).
^ Screw the lamp cover and the seal back on again.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
The heating works Light in the side wall:
but not the oven
The halogen lamp needs replacing.
lighting.
^ Disconnect the appliance from the electricity supply.
Switch off and unplug at the socket, or remove the fuse,
or switch off at the isolator as appropriate.
^ Remove the runners.
^ Use the lever to release the lamp cover from its frame.
^ Change the halogen lamp.
When purchasing a new lamp, take the old one with you
to make sure you obtain the correct replacement (Osram
66275, 230 V, 25 W, G9, heat resistant to 300 °C).
^ Push the lamp cover back into its retainers, and replace
the runners.
A noise can be
heard after a
This is not a fault.
The cooling fans continue to run for a while after the oven
has been switched off to prevent any humidity building up
in the oven, on the control panel or on the oven housing
unit. When the temperature has fallen sufficiently, the fans
switch off automatically.
cooking process.
The temperature will fall faster with the oven door open.
Cakes and biscuits – Check that the correct temperature has been set.
are not cooked
– Check whether there has been a change to the recipe.
properly after
The addition of more liquid or more eggs makes a
following the times
moister mix which would need longer to cook.
given in the chart.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
Browning is uneven. There will always be a slight unevenness. If browning is
very uneven, check
with Fan plus U:
– whether the temperature was set too high,
– whether the correct shelf level was used.
with Conventional heat V:
– the colour and material of the baking tins being used.
Light coloured, shiny, or thin walled tins are less suitable.
– whether the correct shelf level was used.
A fault code
appears in the
display (F +
numbers), and a
polyphonic tune
plays.
You can rectify the following fault codes yourself:
– F 23: The pyrolytic temperature of approx. 460 °C was
not reached.
This could have been caused by too much soiling in the
oven to start with.
Remove all coarse soiling before starting the pyrolytic
cleaning programme again.
If the fault code appears again please contact the Miele
Service Department.
– F 32: The door has not locked.
Interrupt the pyrolytic cleaning programme by switching
the oven off. Then start the pyrolytic programme again.
If the fault code appears again call the Miele Service
Department.
– F 33: The door lock for the pyrolytic cleaning programme
will not open.
Interrupt the pyrolytic cleaning programme by switching
the oven off. If the door lock will still not open please
contact the Miele Service Department.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause and remedy
A fault code
appears in the
display (F +
numbers), and a
polyphonic tune
plays.
– F 55: Safety switch-off has been triggered. The oven has
switched off automatically as it has been in use for an
unusually long time. The length of time depends on the
oven function selected.
The oven can be used again immediately by switching it
off and back on again.
For all other fault codes please contact the Miele Ser-
vice Department.
If it is not possible to remedy a fault by following the instructions given above,
contact the Service Department. On no account open the appliance casing.
This appliance should only be repaired by a suitably qualified technician
trained by Miele.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of any faults which you
cannot remedy yourself, or if the
appliance is under guarantee, please
contact
When contacting Miele, please quote
the model and serial number of your
appliance.
These are shown on the data plate,
visible on the front frame of the oven
with the door fully open.
– your Miele Dealer
or
– the Miele Customer Contact Centre
(see back cover for address).
Please note that telephone calls may
be monitored and recorded to
improve our service.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
The following accessories may come as standard with some models. They are
Miele Dealer or the Miele Spare Parts Department.
FlexiClip telescopic runners
Anti-splash tray
The anti-splash insert should be placed
in the Universal tray when grilling or
roasting.
More FlexiClip telescopic runners can
be installed in the oven in addition to
those supplied.
The juices from the food being cooked
collect under the anti-splash tray. This
prevents them from spitting and making
the oven dirty. The juices can then be
used for making gravy and sauces.
Univeral tray, Rack
These items, supplied with your oven,
are also available to order.
When ordering, please quote the model
number of your oven.
Flan/Pizza dish
This circular pan is suitable for cooking
pizzas, flat cakes made with yeast or
whisked mixtures, sweet and savoury
tarts, baked desserts, and can also be
used for frozen cakes and pizzas.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional accessories
Gourmet oven dish
Pizza stone
The gourmet oven dish can be placed
in the oven directly on the rack.
It has an anti-stick coating and is
available in two sizes:
– HUB 5000-M (internal dimensions
38 x 22 x 8 cm)
The pizza stone is ideal for items which
need a well baked base such as pizza,
quiche, bread, bread rolls and savoury
snacks.
The baking stone is made from heat
retaining fire brick and is glazed.
Place it directly on the rack.
– HUB 5000-M (internal dimensions
approx. 38 x 35 x 8 cm)
A paddle made of untreated wood is
supplied with it for placing food on the
pizza stone and taking it off.
Child safety lock
The lock is fitted beneath the control
panel on the left to prevent the door
from being opened. The door can only
then be opened by pressing the lever.
Gourmet oven dish lid
Miele E-cloth
Removes grease and stains and leaves
no smearing. Suitable for cleaning
surfaces such as stainless steel, glass,
plastic and chrome without the use of
chemicals.
When ordering a lid, please specify the
gourmet oven dish it is to be used with
(HUB 5000 M or XL).
Oven cleaner
Suitable for removing stubborn soiling.
It is not necessary to pre-heat the oven
beforehand.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
isolator switch (including switch, fuses
and relays acc. to EN 60 335).
All electrical work should be
undertaken by a suitably qualified
and competent person in strict
accordance with current national
and local safety regulations (BS
7671 in the UK).
Important U.K.
The appliance is supplied for
connection to a 230-240 V, 50 Hz
supply with a 3-core cable.
Installation, repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
The wires in the mains lead are
coloured in accordance with the
following code:
unauthorised work.
Ensure power is not supplied to the
appliance until after installation or
repair work has been carried out.
Green/yellow = earth
Blue = neutral
The voltage and connected load are
given on the data plate, visible below
the oven interior, with the door open.
Ensure that these match the household
mains supply. Please quote these data,
and the model and serial number when
contacting Miele.
Brown = live
WARNING
THIS APPLIANCE MUST BE
EARTHED
Connection of this appliance should be
made via a fused connection unit or a
suitable isolator, which complies with
national and local safety regulations,
and the on/off switch should be easily
accessible after the appliance has
been built in.
When replacing the cable supplied
with another cable or changing the
connection, only cable type
H 05 V2V2-F with a suitable cross-
sectional area (CSA) may be used
(available from Miele Spare Parts).
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
For extra safety it is advisable to install
a residual current device (RCD). Please
contact a qualified electrician for
advice.
When switched off there must be an
all-pole contact gap of 3 mm in the
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Appliance dimensions and unit cut-out
Installation in a base unit
HAL 5900 trim, available as an optional accessory, is only required when
building the oven into a base unit.
^ Fix the HAL 5900 trim into the unit cut-out under the worktop (see lower section
of diagram).
* Appliances with glass front
** Appliances with metal front
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Installation in a tall unit
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Building-in diagrams
Front dimensions
* Appliances with glass front
** Appliances with metal front
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the oven
,The appliance must not be
operated until it has been correctly
installed in its housing unit.
Otherwise it poses an electric shock
hazard.
Turn off the mains electricity supply
to the isolator.
Remove the carry handles at the
sides.
To ensure adequate ventilation to
the oven once installed:
– do not fit a rear panel into the
housing unit.
– make sure that the shelf on which
the appliance is placed does not
touch the wall.
– do not fit insulation material inside
the housing unit.
When installing the appliance do not
lift it up by the door handle as this
can damage the door.
^ Using the screws supplied, fix the
brackets supplied to the right and left
side of the housing unit.
^ Connect the mains cable from the
oven to the isolator.
^ Push the appliance into the oven
housing unit and align it.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved / 22 / xx08
(H 5981 BP)
M.-Nr. 07 293 000 / 00
Download from Www.Somanuals.com. All Manuals Search And Download.
|