Operating instructions
for condenser tumble dryer
T 4662 C
G
To avoid the risk of accidents or
damage to the machine it is
essential to read these instructions
before it is installed and used for the first time.
M.-Nr. 06 465 800
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Energy saving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the tumble dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Notes on laundry care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Care symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Tips on drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
How to dry correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Low temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Changing a programme while it is running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To cancel a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To interrupt a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 23
Electronic programme locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Emptying the condensed water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Cleaning the fluff filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning them whilst dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning them with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Removing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Checking the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cleaning the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Replacing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Changing the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
After Sales service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Future updates (PC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Transporting the machine to its installation site . . . . . . . . . . . . . . . . . . . . . . . . 39
Building under a continous worktop / in a row of kitchen units . . . . . . . . . . . . 39
Replacing the lid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Levelling the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Room in which the dryer is located . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Washer - dryer stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Before moving the machine again (e.g. when moving house). . . . . . . . . . . . . 40
External condensed water outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Setting up the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Connection to a sink drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
If you no longer wish to use an external condensed water outlet . . . . . . . . . . 42
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Time of day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Extending the cooling down time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Airways indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Display contrast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Display brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Keypad tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
To avoid the risk of accidents and
damage to the machine please read
these instructions carefully before
using it for the first time. They
contain important information on its
safety, installation, use and
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner of the
machine.
Before setting up the machine,
check it for any externally visible
damage.
Do not install or use a damaged
machine.
Before connecting the machine,
ensure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
The electrical safety of this
Correct use
machine can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with local and national
regulations. It is most important that this
basic safety requirement is present and
regularly tested, and where there is any
doubt the household wiring system
should be inspected by a qualified
electrician. The manufacturer cannot be
held liable for the consequences of an
inadequate earthing system (e.g.
electric shock).
The tumble dryer is only intended
for drying fabrics which have been
washed in a water solution, marked on
the manufacturer's care label as being
suitable for tumble drying.
"Dry cleaning kits" for freshening up
garments in a tumble dryer are
increasingly available on the market. If
using, do so at your own risk, and
follow the instructions provided on the
packaging.
Any other applications may be
dangerous. The manufacturer is not
liable for damage resulting from
improper use or operation.
Do not connect the appliance to
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The machine is built in accordance
with current safety requirements.
Unauthorised repairs could result in
unforeseen dangers for the user, for
which the manufacturer cannot accept
liability. Repairs should only be
undertaken by a Miele approved
technician.
Ensure current is not supplied to the
machine until after maintenance or
repair work has been carried out.
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can the safety standards of the
machine be guaranteed.
If the connection cable is faulty it
must only be replaced by a Miele
approved service technician to protect
the user from danger.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the
machine and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the machine guarantee.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
In the event of a fault or for
cleaning purposes, the machine is
If the water is drained externally
through the drain hose instead of
only completely isolated from the
electiricty supply when:
being collected in the condensed water
container, make sure the drain hose is
securely attached if you hang it in a
sink or basin to avoid the hose slipping
and the water causing damage.
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is withdrawn.
Condensed water is not drinking
water. It can cause health
problems in both people and animals.
Operation
Always keep the area around the
machine free of dust and fluff. Dust
drawn into the machine can, over time,
cause blockages in the condenser unit.
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
The dryer must not be used without
the fluff filters in place or if the fluff
filters are damaged in any way.
The fluff filters must be thoroughly
dried after cleaning. If they are still
damp or wet when replaced there is a
risk of faults occurring when the
machine is used.
The dryer must not be used without
the condenser unit in place.
Do not install the machine in a
room where there is a risk of frost
occurring. At temperatures around
freezing point the machine may not be
able to operate properly.
There is a risk of damage if the
condensed water is allowed to freeze in
the pump, hoses and / or condensed
water container.
The ambient room temperature should
be between +2°C and +35°C.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
To prevent the risk of fire the
following textiles must not be
dried in this machine:
Safety with children
This machine is not a toy. To avoid
the risk of injury keep children
– fabrics which contain a large
away from the machine at all times and
proportion of rubber, foam rubber or
rubber like materials.
supervise them whilst you are using it.
Do not allow children to play on or near
it or to play with its controls. Supervise
its use by the elderly or infirm.
– items which contain padding or
fillings (e.g. pillows, jackets).
– items which have been treated with
inflammable cleaning agents.
Using accessories
Accessory parts may only be fitted
when expressly approved by Miele.
– items which have been splashed with
hair lacquer, hair spray, nail varnish
remover or similar substances.
If non-Miele parts are used with this
machine, guarantee, performance and
product liability claims may be
invalidated.
– items which have been soiled with
oils or residues containing grease
(kitchen oils, cosmetics etc.).
– items soiled with wax or other
chemicals (e.g. mops and floor
cloths).
Disposal of your old machine
Before discarding an old machine,
switch it off at the wall socket and
unplug it. Render the plug useless and
cut off the cable directly behind the
machine. This should be done by a
competent person.
– items which have not been
thoroughly cleaned and which are
still soiled with grease or oil, e.g.
workwear. Such clothing may require
a heavy duty detergent to get them
clean. If necessary consult the
detergent manufacturer for advice.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Do not let anyone sit or lean on the
door, as this can cause the
machine to tip up.
Always close the door after use.
This way you will avoid the danger
of:
– children climbing onto or into the
dryer or hiding things in it.
– pets or other small animals climbing
into it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Control panel
aDisplay
fExtras buttons with indicator lights
Various Extras (options) can be
See the following pages for more
information.
added to the drying programmes.
bStart/Stop button
gProgramme selector
For starting the programme selected
and cancelling a programme once it
has started.
For selecting a programme. The
programme selector can be turned
clockwise or anti-clockwise.
c–, OK and + buttons
See the following page for more
information.
hI-On/0-Off button
For switching the dryer on and off.
iDoor button
dm button
Pressing this button will open the
door, even if the machine is switched
off at the mains.
For selecting delay start and
displaying the time of day.
ePC / Optical interface
This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Display
m button
For selecting delay start.
You can also press this button during a
drying programme to check the
estimated programme end time or the
current time of day.
The following are shown in the display:
– Programme Selection menu
– Programme duration and the
programme start and end time
– Fault and error messages
Estimated time remaining
When a programme is selected, the
display is used to select:
When a programme is selected the
estimated drying time will appear in the
display. Please be aware that it is only
an estimate!
– Different drying levels
– Delay start
The following factors all affect the
estimated time remaining: Residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The Settings J menu is also operated
via the display.
- / + buttons
For altering the values shown in the
display:
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this the
time displayed can alter during the
course of a programme.
- decreases the value or moves the
highlighting upwards
+ increases the value or moves the
highlighting downwards
OK button
For confirming the value selected and
choosing the next option.
In the same way, the Woollens hand
care and Smoothing programmes can
finish earlier than expected if a certain
temperature is reached. This can
happen with particularly fine fabrics or
if items were partly dry beforehand.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Before using for the first time
Entry menu
When the tumble dryer is switched on
for the first time, the welcome screen
will appear.
The entry menu showing the current
time of day will appear after the
machine has been switched on, until
you select an option.
The welcome screen will not appear
again after you have entered the time of After a few seconds an additional line
day, and run an initial programme
lasting longer than one hour.
will appear in the display. Settings J:
10:00
The display for setting the time of day
will appear.
Select programme
Settings F ...
To set the time of day
See "Settings menu" at the end of this
booklet for more information.
10 : 00
You can now load the laundry into the
dryer and select a programme as
described in "How to dry correctly".
Set time of day
^ Set the hour with the - and + buttons
and confirm your setting by pressing
the OK button.
^ Now set the minutes and confirm
your selection.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on laundry care
Care symbols
– Down-filled garments have linings
which have a tendency to shrink,
depending on the quality of the item.
They can be partially dried using the
Smoothing programme.
Before drying check the drying symbol
on the care label. If there are no
symbols, dry at your own risk!
q . . . . . . . . . Dry at normal temperature
r . . . . . . . . . . Dry at a low temperature
s . . . . . . . . . . . . . . . Do not tumble dry
– Pure linen should only be machine
dried if specified as suitable by the
manufacturer on the care label, as
the surface of the fabric may
otherwise become rough. They can
be partially dried using the
Tips on drying
– Always observe the maximum
recommended loads given in the
"Programme chart". Never overload
the drum.
Smoothing programme.
– Loopknit garments (e.g. T-shirts and
underwear) tend to shrink depending
on their quality. Do not over-dry these
textiles. When purchasing these
Overloading can cause unnecessary
wear and tear to the laundry, give a
disappointing drying result and
cause more creasing.
garments it is advisable to take their
shrinkage properties into account.
– For garments made from very fine
weave fabrics, such as shirts or
blouses, only use the Shirts or
Delicates programme to avoid
creasing. If in doubt, reduce the load
or use the Smoothing or Silks
handcare programme.
– Do not put soaking wet items into the
tumble dryer. Spin them thoroughly
after washing using the appropriate
spin speed.
– For delicates and fabrics with the
following care label r select Low
temperature.
– Starched laundry can be dried in the
tumble dryer. To achieve the usual
finish, double the amount of starch
should be used.
– Use the Automatic programme for
drying mixed loads of cottons and
minimum iron fabrics.
– New dark coloured garments should
be washed and dried separately
from light coloured garments to avoid
the danger of colours running and
discolouring other garments or even
plastic components in the machine.
Dark coloured fibres can also settle
on light coloured garments and vice
versa.
– Open jackets so that they can dry
evenly.
– Woollens and wool blends tend to
become matted and shrink if dried in
a tumble dryer. They can, however,
be partially dried using the Woollens
hand care programme.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
Brief instructions
C Load the tumble dryer
The headings numbered (A, B, C ...)
show the operating sequence and can
be used as a brief guide to using your
machine.
^ Press the Door button to open the
door.
^ Load the laundry loosely into the
drum.
A Sort the laundry
Do not overload the drum. See the
"Programme chart" for
recommended loads for each
programme.
Overloading can cause unnecessary
wear and tear to the laundry and
give a disappointing drying result.
To ensure an even drying result
separate out the washed laundry and
sort it according to: . .
. . . the drying level required
. . . the type of fibre or weave
. . size
. . the moisture content after spinning.
^ Before closing the door make sure
the fluff filter is correctly positioned.
,Make sure that objects e.g.
detergent dispensing balls have
been removed from the laundry.
They could melt, and cause damage
to the dryer or the laundry.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers and pillow
cases to prevent small items from
being trapped inside them.
– Fasten hooks and eyes etc.
– Tie fabric belts and apron strings.
– Sew in or remove underwiring from
bras.
Check the laundry is right inside the
drum so that it cannot get trapped or
damaged when the door is shut.
B Turn on the tumble dryer
^ Switch the dryer on by pressing the
I-On/0-Off button in.
^ Shut the door either with a gentle
swing, or lean against it and push it
shut.
The tumble dryer may be switched on
after loading, saving energy as the light
will not come on.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
D Select a programme
Woollens Hand care, Smoothing
You cannot select a drying level or a
duration for this programme.
Further programmes
When you select this setting the further
programmes will appear in the display.
E
Delicates
Silks handcare
Warm air
H
^ Use the + or - button to highlight the
programme you want. The arrow H
in the display indicates that there are
further options.
^ Turn the selector to the programme
you require.
^ Confirm your selection by pressing
the OK button.
The display will vary according to which
programme has been selected. First
only the programme name will appear:
Delicates
Normal
Cottons
Duration
0:30 h
^ You can use the + or – button to alter
the drying level for the Outerwear,
Delicates and Sportswear
programmes.
The display will then change.
Please note that the programme
duration shown in the display, will vary
according to the programme selected
(see "Estimated time remaining").
Warm air
2:00
h
Cottons, Minimum iron, Automatic,
Shirts, Denim
Duration:
2:00 h
You can select various drying levels for
these programmes.
^ You can use the + or – to increase or
decrease the duration from 15 min.
up to 2 h for the Warm air or Cool air
timed drying programmes.
Normal
You cannot alter the drying level or
duration for the other programmes.
Duration:
1:29 h
^ Use the + or - button to alter the
drying level on Automatic, Shirts and
Denim.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
Selecting Extra options
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence: Cool down
will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the following programmes:
Woollens hand care, Smoothing.
At the end of a programme
Anti-crease (if selected) and Finish will
appear in the display to indicate that
the programme has finished. The
buzzer will sound (if selected).
^ Select the Extra option you want.
Indicator light on = Extra option is
selected
F Remove the laundry
To select delay start
^ See "Delay start".
^ Press the Door button to open the
drum door.
E Start the programme
^ Remove the laundry.
The indicator light for the Start/Stop
button will flash when a programme is
being selected. The flashing indicates
that a programme can be started.
Make sure that the drum is empty. If
items are left in the dryer, they could
be damaged by overdrying when
the dryer is next used.
^ Press the Start/Stop button.
The indicator light for the Start/Stop will
then change from flashing to being on
constantly.
If the appliance is switched on and the
door is opened, the drum lighting will
come on. It will go out a few minutes
later to save energy.
Programme start will appear in the
display, followed by Drying and the
programme duration.
^ Switch the dryer off by pressing the
l-On/0-Off-button.
With sensor drying programmes, e.g.
Machine iron, Hand iron, etc. the drying
level reached will be shown in the
display later on.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (unless the dryer is
connected for external drainage).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
Short
For drying fabrics which can
withstand higher temperatures and
have q on the care label. Do not use
on minimum iron or delicate fabrics.
– The programme duration is shorter.
Anti-crease
Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme.
^ Each press of the top button selects
the Extra option - indicator light on
(and deselects the previous option)
or no option is selected.
– The drum will turn at intervals for up
to an hour.
– It is not possible to select the Short
and Low temperature options at the
same time.
Buzzer
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
– Not all the extra options are suitable
for use with every programme.
– You can change the volume of the
Low temperature
buzzer. See "Settings J".
For drying delicates and fabrics with
the r symbol on the care label at a
lower temperature.
– The buzzer will always sound when
there is a fault, even if it has been
switched off.
– For all delicate or minimum iron
fabrics with the r symbol on the
care label (e.g. acrylic garments).
– The programme duration is longer.
– On some programmes Low
temperature is a standard part of the
programme and so cannot be
deselected.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end,
allowing you to make use of night-time
economy electricity rates for example.
The start of a programme can be
delayed by up to 24 hours.
To begin delay start
^ Press the Start/Stop button.
Normal
Begin in:
0:45 h
To select delay start
The delay start time will now count
down in minutes until the start of the
programme.
The drum will turn briefly every hour to
help prevent creasing.
^ Select the programme you want and
then press the m button.
10:00
Begin:
Finish:
10:00
11:45
Changing the programme sequence
While the delay start time is counting
down, you can still . . .
. . . change the Extra options or drying
levels.
. . . press the Door button and add or
remove laundry. After closing the door,
press the Start/Stop button again.
The display will show the current time of
day at the top, the time the programme
will start in the middle and the time the
programme will finish at the bottom.
10:00
Begin:
Finish:
10:45
12:30
To alter delay start
^ Press the m button.
^ Use the + button to select the time
you want the programme to end at.
^ Use the - or + button to alter the time
you want the programme to end at.
The delay start time is selected in
30-minute steps. The first press on the
button will adjust the programme end
time to the next full or half hour. The
start time of the programme is also
adjusted accordingly.
^ Confirm your selection by pressing
the OK button.
To delete delay start
^ Press the m button.
^ Press and hold the - pressed in, until
the time the programme is due to
start at is the same as the current
time of day.
Use the - button to shorten the end time
if you have chosen too long a time.
^ Confirm your selection by pressing
the OK button.
^ Confirm your selection by pressing
the OK button.
The programme will now start immedi-
ately.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons
Max. load: 6 kg*
Normal+, Normal**
Fabric type Single and multi-layered cotton fabrics such as towelling,
jerseywear, underwear, flannelette bed linen.
Extra
Low temperature (select this option for delicate fabrics with the r
options
symbol on the care label), Short, Anti-crease, Buzzer
Hand iron r**, Machine iron
Fabric type Cottons or linen fabrics, e.g. table linen, bedlinen, starched
laundry.
Note
– To prevent laundry from drying out it should be rolled up until
you are ready for ironing.
Extra
Low temperature (select this option for delicate fabrics with the r
options
symbol on the care label), Short, Anti-crease, Buzzer
Minimum iron
Max. load: 3 kg*
Normal+, Normal**, Hand iron r
Fabric type Minimum iron items made of cotton, synthetic or blended fabrics,
e.g. shirts, blouses, skirts and table cloths.
Note
– In the Minimum iron Hand iron programme, items are dried with
very little creasing, depending on fabric type and amount of
laundry.
Extra
Low temperature (select this option for delicate fabrics with the r
options
symbol on the care label), Short, Anti-crease, Buzzer
Automatic
Max. load: 3 kg*
Normal+, Normal, Hand iron r
Fabric type Mixed load of cotton and minimum iron fabrics.
Extra
Anti-crease, Buzzer
options
*
Weight of dry laundry
** Note for test institutes:
Use this programme without any Extra options when testing according to
EN 61121 Standard.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Shirts
Max. load: 2 kg*
Normal+, Normal, Hand iron r
Fabric type Shirts and blouses
Extra options Anti-crease, Buzzer, Low temperature. (Low temperature cannot
be deselected).
Denim
Max. load: 3 kg*
Normal, Hand iron r
Fabric type Denim fabrics, e.g. jeans, jackets, skirts, shirts.
Extra options Anti-crease, Buzzer, Low temperature. (Low temperature cannot
be deselected).
Woollens hand care
Max. load: 2 kg*
Fabric type Woollen fabrics
Notes
– To refresh and fluff up woollen garments quickly. Woollen
fabrics are not dried completely by this programme.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
Extra options Buzzer, Low temperature. (Low temperature cannot be
deselected).
Smoothing
Max. load: 3 kg*
Fabric type – Cottons and linen fabrics.
– Minimum iron items made of mixed fibres, cottons or synthetics,
e.g. trousers, jackets, shirts.
Notes
– Smooths out creasing caused during the spin cycle in the
washing machine.
– Fabrics are not completely dried in this programme. Remove
garments as soon as the programme has finished and leave to
finish drying at room temperature.
Extra options Anti-crease, Buzzer, Low temperature. (Low temperature cannot
be deselected).
*
Weight of dry laundry
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Silks handcare
Max. load: 1 kg*
Fabric type Silks, e.g. blouses and shirts.
Notes
– Smooths out creasing.
– Fabrics are not completely dried in this programme. Remove
garments as soon as the programme has finished and leave to
finish drying at room temperature.
Extra options Anti-crease, Buzzer, Low temperature. (Low temperature cannot
be deselected).
Timed Drying
Warm air
Max. load: 6 kg*
Fabric type – Multi-layered fabrics whose layers have different drying
characteristics, e.g. jackets, pillows.
– For drying individual items, e.g. bath towels, bathing costumes,
tea-towels.
Notes
– Do not select the longest drying time to start with. Check the
items as you are drying them to find the optimum time.
Extra options Buzzer, Anti-crease, Low temperature
Cool air
Fabric type Any item which only needs airing.
Extra options Anti-crease, Buzzer
Outerwear
Max. load: 2 kg*
Normal, Hand iron r
Fabric type Outerwear which is suitable for drying in a tumble dryer.
Extra options Anti-crease, Buzzer
Delicates
Max. load: 2 kg*
Normal+, Normal
Hand iron r, Hand iron rr, Machine iron
Fabric type For delicate garments made of synthetic fibres, mixed fibres, easy
care cotton shirts and blouses and evening wear with sequins and
beading.
Extra options Anti-crease, Buzzer, Low temperature. (Low temperature cannot
be deselected).
*
Weight of dry laundry
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Sportswear
Max. load: 2 kg*
Normal+, Normal, Hand iron r
Fabric type Sportswear which is suitable for drying in a tumble dryer.
Extra options Anti-crease, Buzzer
Pillows large
Pillows
1 pillow up to 80x80 cm
1-2 pillows up to 40x40 cm
Fabric type Pillows suitable for drying in a tumble dryer, with feather, down or
synthetic fillings.
Note
– Please observe the instructions on the care label. Pillows can
still feel damp after being dried. You can use this programme
several times until the pillow feels dry.
Extra options Anti-crease, Buzzer
Proofing
Max. load: 2 kg*
Fabric type For drying microfibre fabrics, skiwear, fine, closeweave cotton
garments (poplin) or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt
resistant finish.
Notes
– This programme includes a proofing fixing phase.
– Only use proofing agents which are stated by the
manufacturer as being "suitable for use on membrane
textiles" as these contain fluorochemical compounds.
– Do not dry items which have been treated with proofing
agents containing parafin. Fire hazard!
Extra options Anti-crease, Buzzer
Weight of dry laundry
*
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Changing a programme while it To interrupt a programme
is running
^ Switch the dryer off with the
I-On/0-Off button.
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). If the programme selector
is altered, the words Programme cannot
be changed appear if the selector is
not turned back to the original
programme.
To continue drying
^ Switch the dryer back on with the
l-On/0-Off button.
The programme will continue, as long
as the cooling down phase has not
been reached.
You will need to cancel the current
programme before you can select a
new one.
Adding or removing laundry
after a programme has started
^ Press the Door button.
To cancel a programme
^ Open the door.
^ Press the Start/Stop button.
,Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
The items will be cooled down,
depending on how long they have
been dried for and the temperature
reached.
If you press the Start/Stop button
again during the cooling down
phase, Finish will appear in the
display.
^ Add or remove items.
^ Close the door.
To continue drying
To select a new programme:
^ Press the Start/Stop button.
^ Switch the dryer off with the
I-On/0-Off button.
The time left shown in the display may
now vary from the actual drying time.
^ Switch the dryer back on with the
l-On/0-Off button.
^ Select a different programme.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic programme locking
Programme locking prevents the
programme sequence being altered
when drying is in progress.
The door is not locked and can be
opened at any time.
To activate programme locking
^ Once the programme has started,
press and hold the Start/Stop button
for at least 6 seconds until the
following appears in the display:
System locked
X
Now no more alterations can be made
to the programme.
To deactivate programme locking
^ Press and hold the Start/Stop button
for at least 6 seconds until the
following appears in the display:
Ready
W
Important:
Programme locking is deactivated
automatically at the end of the
programme or by pressing the Door
button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Emptying the condensed
water container
The condensed water will be collected
in the condensed water container
unless the appliance has been fitted
with a drain hose (see installation).
Empty the condensed water
container after every drying
programme.
The drying programme will be
interrupted if the maximum level of the
condensed water container is reached.
A message will appear in the display.
^ Open the shutter and empty out the
water.
^ To replace the container, hold it at a
slight angle (as when removing it)
and push it in gently until you feel it
click into position.
^ To remove the message from the
display, switch the dryer off and then
on again.
Condensed water should not be
consumed. It could lead to health
problems for people and animals.
Condensed water can be put to
household use (e.g. used in a steam
iron or humidifier). To ensure that any
residual particles of fluff in the
condensed water are removed before
use, pass it through a fine sieve or
paper filter first.
^ Holding the container firmly in both
hands, as shown, pull it out slightly
towards the right-hand side.
^ Hold the container in a horizontal
position when carrying it.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the fluff filters
^ Remove any fluff from the hollow part
of the door holder. A cleaning brush
is available as an optional extra from
your Miele dealer or the Miele Spare
Parts Department.
The fluff which is created by the drying
process is collected by the fluff filters in
the door and the door opening. Clean
the filters after each drying programme.
Tip: You can also use a vacuum
cleaner.
Cleaning them whilst dry
^ Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^ Also clean the door seal (2) with a
damp cloth.
^ Open the door and pull the fluff filter
(1) out of the door as illustrated.
^ Use your fingers to remove the fluff
from the two fluff filters in the door
opening.
^ Close the door.
^ Use your fingers to remove the fluff
from the surface of the filter.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning them with water
^ Place the filters back in the door
opening (the left and right filters are
identical) with the finger holders
facing upwards. See illustration.
If there is a great deal of compacted
fluff on any of the filters, they can be
removed and cleaned under hot
running water.
Cleaning the tumble dryer
^ To remove the fluff filter from the door
holder see previous page.
Disconnect the machine from the
mains electricity supply.
^ Clean the housing and control panel
with a slightly damp cloth and a mild
detergent or soapy water.
^ The drum and other stainless steel
parts can be cleaned with a suitable
proprietary stainless steel cleaner
following the manufacturer's
instructions.
Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic sufaces and other
parts. The machine must never be
hosed down.
^ To remove the filters in the door
opening, grip the holder and push
upwards in the direction of the arrow
to remove it.
^ Dry all parts with a soft cloth.
^ Rinse the filters under hot, running
water.
^ A microfibre E-Cloth is available from
the Miele UK Spare Parts Department
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals. It can be washed
300 times.
^ Then shake the filters until no more
water droplets are visible.
^ Dry the filters thoroughly with care.
,Do not replace them if they are
damp or wet. Damp or wet filters
could cause operational faults.
^ Push the large filter back into the
door holder until it clicks into position.
Ensure it is facing the correct way.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the condenser unit
Detergent residue, hair and fine fluff
from the dryer can get through the fluff
filters and block the condenser unit.
Dust from the room in which the dryer is
installed can also get into the
condenser unit and cause a blockage.
Check the condenser unit at least
twice a year. If the dryer is used
frequently then clean the condenser
unit after approx. 100 drying cycles.
^ Turn the lever on the inner cover
downwards to the vertical position.
Removing the condenser unit
^ Pull the cover forwards
^ Then remove it by pulling it
diagonally upwards.
^ Open the service panel by pressing
the two lower corners at the same
time (see illustration).
The hooks at the side will prevent the
panel from falling off.
^ Turn the lever on the condenser unit
to the vertical position.
^ Now remove the panel by pulling it
diagonally upwards.
^ Then place it to one side.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
If you cannot see any fluff:
^ Replace the condenser unit (see
following page).
If you can see some fluff:
^ Clean the condenser unit as
described below.
Cleaning the condenser unit
^ When rinsing the condenser unit,
make sure you position it as shown
in the next two illustrations.
^ Pull the condenser unit out of its
housing by the handle.
Checking the condenser unit
^ Use a shower head or similar to rinse
the unit out as shown.
^ Hold the condenser unit up to the
light as shown.
^ Check to see if there is any fluff
inside it.
The arrows in the illustration above
indicate where to look.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Replacing the condenser unit
^ With the handle facing upwards,
push the condenser unit back into
position in its housing.
^ Turn the lever down to the horizontal
position, making sure that the hook
on the lever clicks into the groove.
When replacing the cover after
cleaning, ensure that the rubber seal
fits correctly into the groove.
^ Replace the cover making sure the
hooks locate correctly. Hold it at an
angle and push it gently downwards.
^ Then flush the unit through from the
front.
^ Then turn the lever upwards into the
horizontal position to lock the cover.
^ Check the condenser unit again for
any visible fluff and if necessary flush
it through again until it has all gone.
^ Replace the service panel and press
the upper edge until it clicks into
position.
^ Remove any soiling still visible inside
the housing unit by hand using a
damp cloth. Do not try and access
areas you cannot reach by hand!
,It is important to ensure that both
the condenser unit and the cover are
correctly positioned and locked
otherwise water may leak from the
machine.
^ Also make sure the rubber seals are
clean.
The rubber seals must not be
removed and must be free of kinks.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem solving guide
With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Fault messages in the display
Problem
Possible cause
Remedy
Locked. Enter code
The lock has been activated. See Settings menu J.
X
The electronic programme
lock has been activated.
Press and hold the Start/Stop
button until Ready appears in
the display.
System locked
l
This is not a fault.
The electronic unit has
Use the Warm air programme
(timed drying) to dry
individual items.
Adjust the load
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments
or items which are already
dry can also cause the
To delete the fault message:
– Open the door or switch
the dryer off and then back
on again.
programme to be cancelled.
q
Empty the
container
The condensed water
container is full or there is a
kink in the drain hose.
– Empty out the condensed
water container or check
the drain hose.
To delete the fault message:
– Switch the dryer off and
then back on again.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
The following
message
appears after
the programme
has finished:
Clean the filters
Air is not flowing freely
through the dryer.
– The dryer is not working
efficiently or
– Clean the fluff filters.
If they need to be cleaned
with water, make sure they
are completely dry before
replacing them.
– See also the notes on the
next page under: "The drying
process goes on too long or
even switches off".
economically.
– Possible causes: The fluff
filters are clogged with
fluff or with detergent
residues.
To delete the fault message:
– Switch the dryer off and then
back on again.
You can adjust the setting
which controls when or if
the message Clean the
filters appears.
See Settings menu J, Airways
indicator section.
,
No obvious cause.
– Clean the fluff filters and the
Technical fault
Call the Service
Department
condenser unit.
Clean the filters will already To delete the fault message:
In some circumstances,
have been displayed.
– Switch the dryer off and then
back on again.
There is a fault, if despite
Contact the Miele Service
doing this, the programme Department.
is cancelled and the fault
message appears again.
i
An attempt has been made You will need to cancel the
to alter a programme while current programme before you
Programme
cannot
be changed
it is in progress.
can select a new one.
i
This is not a fault.
Settings were changed during a
delay start period, or there has
been a power cut.
Programme finish
time changed
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Other problems
Problem
Possible cause
Remedy
The drying
In some circumstances the following message also appears:
process goes Clean the filters
on too long or
even switches
off.
Please check all the possible causes and switch the dryer
off and then back on again.
Ventilation to and from the Open a door or window while the
dryer may be insufficient
machine is in operation for
(e.g because it is installed increased air flow.
in a small room). This has
caused the temperature in
the room to rise sharply.
The fluff filters are clogged – Remove any fluff.
up with fluff or were still wet
when they were replaced.
– The fluff filters must be
completely dry.
The laundry has not been Make sure that your laundry is
spun sufficiently.
thoroughly spun at the washing
machine's maximum spin speed.
The tumble dryer has been Do not exceed the maximum load
overloaded. for the programme selected.
Metallic components, e.g. – Open zips next time.
zips have prevented the
dryer from registering the
correct moisture level in
the laundry.
If the problem occurs again, dry
garments with long zips using the
Warm air programme (timed
drying).
Detergent residues, hair
and fine fibres can block
up the condenser unit.
Check the condenser unit from
time to time and clean it if
necessary.
The vents below the door
are blocked.
Remove any objects that are
blocking the vents.
The laundry is The load consisted of
not sufficiently different fabrics.
dry.
– Finish drying using the Warm
air programme.
– Select a different programme
the next time.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
The condenser unit The inner cover of the
– Ensure that the
condenser unit is
positioned correctly and
lock the cover.
service panel will
not shut.
condenser unit has not been
locked properly and/or the
condenser unit has not been
positioned correctly.
– Check the rubber seals.
Water leaks from
the machine after
the condenser unit housing.
Fluff has collected at the
bottom of the condenser unit
– Use a cloth to remove
any fluff from the inside
of the condenser unit
housing.
has been cleaned.
Items made of
Synthetic fibres tend to
Static charge can be
synthetic fibres are attract static charge.
charged with static
electricity after
reduced by adding a fabric
conditioner to the final rinse
in the washing machine or
a fabric conditioner sheet
to the load in the dryer.
drying.
There is a build up Fluff is principally the result Fluff is collected by the fluff
of fluff.
of friction when garments are filters and can be easily
being worn and washed.
Machine drying hardly
causes any fluff to form and
has been established by
research institutes to have
no appreciable effect on the
lifetime of fabric.
removed (see Cleaning
and Care).
Feather filled
pillows smell after
drying.
Feathers are a natural
product and this is quite
normal.
The smell will dissipate
after sufficient airing.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
The programme
No obvious cause.
– Is the dryer switched on?
does not start and
the display is dark.
– Is the plug correctly inserted
into the socket and switched
on?
– Is the door closed properly?
– Has the fuse or circuit
breaker tripped?
The interior drum
lighting does not
come on.
The lighting switches off Switch the dryer off and then
automatically (to save
energy).
on again.
The lamp needs
changing.
Change the lamp as described
at the end of this section.
The display is in a
A different language has Set the language you want.
different language. been selected in
"Settings J" "Language
The flag symbol will guide you.
J".
The Start/Stop
This is not a fault.
After the programme has
started, the flashing will
change to a constant light.
button light flashes
when a programme
is being selected.
The flashing indicates
that a programme can
be started.
The display is dark The display has switched The display or programme
and the light ring
around the
off automatically to save selector are lit up after
energy (Stand-by mode). pressing a button or turning
programme selector
is not lit up.
the programme selector.
The same applies to the
programme selector.
The Start/Stop
button light flashes
slowly.
The programme selector The programme selector light
light goes out when the lights up when a programme is
Settings menu has been selected.
selected.
If the problem persists,
there is a fault.
Contact the Miele Service
Department.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Changing the lamp
The lamp specification and
Disconnect the machine from the
mains electricity supply.
maximum wattage is stated on the
data plate and on the lamp cover.
^ Open the door.
^ Replace the lamp.
You will find the interior lamp cover at
the top of the drum aperture.
^ To close the cover push it upwards
and press it on the left and right until
you hear it click into position.
,Ensure that it is fitted into
position securely, as any moisture
could cause a short circuit.
^ Insert a suitable tool, such as a wide
bladed screwdriver, under the side
edge of the lamp cover as illustrated.
^ Apply a little pressure and whilst
doing so turn your wrist in the
direction of the arrow to open the
cover.
The cover will open downwards.
The temperature resistant lamp should
only be ordered from your Miele dealer
or the Miele Spare Parts Department.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales service
In the event of any faults which you
cannot remedy yourself, or if the
machine is under guarantee, please
contact
Future updates (PC)
The indicator or check light marked PC
on the fascia panel is the interface
used by the Miele service technicians
during service work for testing
– your Miele dealer or
purposes and for updating the
machine's programme data.
– the Miele Service Department (see
back cover for contact details).
When contacting your dealer or the Ser-
vice Department, please quote the mo-
del and serial number of your machine,
both of which are shown on the data
plate situated on the right hand side
below the drum aperture.
Appliance guarantee
Please see the guarantee card
supplied with your machine.
Optional accessories
Optional accessories for this dryer are
available from your Miele Dealer or from
the Miele Spare Parts Department.
Please note that telephone calls may
be monitored and recorded to
improve our service.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Front view
aMains connection cable
bCondensed water container
cControl panel
eService panel for condenser unit
fFour height-adjustable screw feet
gExternal drainage options (e.g. via
wash basin, wash basin drain outlet,
or gully).
dDoor
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation site
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, a building
under kit is not necessary. Otherwise
the building under kit is essential.
,Make sure the dryer door can be
opened without hindrance after
installation.
,The building under kit* must be
fitted by a suitably qualified person.
The machine lid is replaced by a
coverplate. It is essential that the
coverplate is fitted to ensure
electrical safety.
Transporting the machine to its
installation site
When moving the machine you can
hold it by the lid where it protrudes to
the rear of the dryer.
To manoeuvre the dryer out of its
packing case to its installation site you
will also need to hold it by the front feet.
The building under kit is supplied with
its own installation instructions.
N.B. When built under running times
may be longer.
Building under a continous worktop /
in a row of kitchen units
– The electrical socket must be
located in an accessible position
near the machine.
The dryer should not be installed
next to a refrigerator or freezer. The
warm air expelled from the rear of
the dryer would increase the
temperature around the
refrigerator's/freezer's heat
exchanger causing the compressor
to run continuously.
With niche heights of:
– 840 mm, longer screw feet* are
required.
– 870/885 mm - 915/930 mm, one or
two height adjustment frames* are
required.
If it is not possible to install the dryer
anywhere else, then the
refrigerator/freezer must be sealed
off from the dryer.
* Available as an optional accessory
from your Miele dealer or the Miele
Spare Parts Department.
Replacing the lid
If the lid has been removed in order to
fit a cover plate, ensure that, if the lid is
replaced, it fits securely into the rear
holders. Otherwise, it is not properly
secure for transport.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Levelling the machine
Room in which the dryer is located
Air taken in for use in the drying
process will be warm when it is
expelled from the rear of the dryer. This
expelled air heats up the air in the
room. It is therefore very important to
ensure that the room is adequately
ventilated, particularly if the dryer is
located in a small room. Otherwise
running times and energy consumption
could be increased.
Washer - dryer stack
The tumble dryer can also be
combined with a Miele washing
machine in a washer-dryer stack. To do
this the appropriate stacking kit* (WTV)
to match your washing machine is
required.
The machine must be perfectly level to
ensure safe and proper operation.
* Available as an optional accessory
from your Miele dealer or the Miele
Spare Parts Department.
,Stacking kits must be fitted by a
suitably qualified fitter.
Before moving the machine again
(e.g. when moving house)
After each use a small quantity of
condensed water will collect in the area
around the pump. This water can run
out if the machine is tipped up when it
is being moved. It is a good idea to run
the Cool air programme for
approximately 1 minute before moving
the machine. Any remaining
condensed water will then be fed into
the condensed water container or out
through the drain hose.
^ The screw feet can be adjusted to
compensate for any unevenness in
the floor.
,The ventilation gaps in the plinth
must not be covered over as this
would prevent a sufficient intake of
air.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External condensed water
outlet
From the back of the dryer at the
bottom:
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
at the back of the dryer. The
condensed water can also be drained
off directly if the machine is installed
near a sink, drain outlet etc. so that
the condensed water container does
not have to be emptied.
The drain hose (approx. 2 m long) is
stored in the dryer. It must be pulled
out of the dryer to its full extent if
condensed water is to be drained
externally. Maximum delivery head:
1 m.
^ Unclip the drain hose from clip (3).
^ Then pull the drain hose completely
out of the dryer towards the left (4)
(See illustration). Important:
If it is not long enough, an extension
hose is available as an optional
accessory through your dealer or from
the Miele Spare Parts Dept.
,Do not let the drain hose
become kinked, as this could
damage it.
Setting up the drain hose
From the back of the dryer at the top:
,If you want to drain the water off
into a sink you will need to secure
the hose carefully, e.g. by tying it to
a tap to make sure it cannot slip
during use. Otherwise there is a risk
of overflowing water which could
cause damage.
Use the bow-shaped guide to prevent
the drain hose from becoming kinked
(see "Front view" illustration).
^ Unclip the drain hose from clip (1).
^ Then pull it off holder (2).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Connection to a sink drain outlet
If this nut has a flat disc in it you should
take the disc out first. Important: if this
nut has a washer or seal in it this must
not be removed!
The drain hose can be connected
directly to a sink drain outlet.
^ Attach the end of the hose to
adapter 1.
^ Use a screwdriver to tighten hose
clip 3 up close to the nut.
If you no longer wish to use an
external condensed water outlet
,Do not push the drain hose
back into the dryer. Doing this could
cause it to become kinked and
damaged in the dryer.
^ Remove the following from the back
of the dryer at the bottom:
Adapter 1 and hose clip 3 behind it.
^ Loop the drain hose up.
^ Use a suitable cable tie to secure the
looped hose to the back of the dryer,
or simply lay the looped hose behind
the dryer.
^ Attach the open end of the drain
hose back onto the holder at the
back of the dryer at the top (see
holder 2 in "Pulling out the drain
hose").
^ Fit adapter 1 to the sink drain outlet
using nut 2.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
national and local safety regulations.
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains
supply. The voltage and connected
load are given on the data plate.
Please ensure these match the
household mains supply. The fuse
rating is quoted on the plug.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA (in accordance
with DIN VDE 0664, VDE 0100 Section
739).
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Programme
Load
Final spin speed
Energy
Time
in a domestic washing machine
kg*
6.0
rpm
kWh
Minutes
Cottons
Normal
800 (70 % residual moisture)**
3.90
3.10
2.95
2.80
2.55
109
87
83
81
74
1200
1400
1600
1800
Cottons
Hand iron
6.0
800 (70 % residual moisture)**
3.25
2.40
2.25
2.15
1.85
93
71
66
64
56
1200
1400
1600
1800
Minimum iron Normal
Minimum iron Hand iron
Delicates Normal
Automatic Normal
Shirts Normal
3.0
3.0
2.0
3.0
2.0
3.0
2.0
1.0
3.0
2.0
2.0
2.0
1.0
1.2
1000 (50 % residual moisture)**
1.50
1.30
1.25
1.85
1.25
1.75
0.15
0.15
0.30
1.40
1.50
1.60
1.60
1.60
47
41
78
66
48
52
4
1000
–
900
900
800
900
–
Denim Normal
Woollens hand care
Silks handcare
Smoothing
5
–
8
Sportswear Normal
Outerwear Normal
Proofing
–
50
57
56
84
98
–
–
Pillows
–
Large Pillows
–
*
Weight of dry laundry
** EN 61121 test programme
All data established in accordance with EN 61121.
Before testing in accordance with EN 61121, dry a 3 kg load of cotton laundry with 70% residual
moisture as per the above standard using the Cottons Normal programme without any Extra options.
Consumption data can vary from the nominal values given above depending on the size of the
load, types of textiles, residual moisture levels after spinning, fluctuations in the electricity
supply and any Extra options selected.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm (adjustable +7 / -7 mm)
Height for building under
Width
820 mm
595 mm
Depth
580 mm
Depth with door open
Weight
1,060 mm
54 kg
Drum volume
Maximum capacity
100 litres
6 kg dry weight
Capacity of condensed
water container
approx. 3.5 l
Hose length
2 m
Maximum delivery head
Maximum drain hose length
Length of connection cable
Voltage
1 m
3 m
2 m
see data plate
Connected load
see data plate
Fuse rating (UK)
see plug
Lamp wattage
see data plate
Energy consumption
Test certificates awarded
see "Consumption data" section
Radio / TV suppression, VDE
45
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
for changing
standard settings
The Settings menu is used to alter the
dryer's electronics to suit different
requirements.
Settings can be altered at any time.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
To open the Settings menu
To close the Settings menu
ASwitch the dryer on.
C
Back A
The entry menu showing the current
time of day will appear after the
machine has been switched on, until
you select an option.
Language F ...
Time ...
H
Select Back and confirm your selection
with the OK button.
10:00
Select programme
Language J
The display can be set to appear in
several different languages.
BAfter a few seconds an additional
line will appear in the display.
A tick L will appear beside the
language to show that it has been set.
10:00
Select programme
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
Settings F ...
CSelect Settings and then press the
OK button.
DThis will take you into the Settings
menu.
C
Back A
Language F ...
Time ...
H
EUse the - and + buttons to select the
setting you want and confirm your
selection by pressing the OK button.
The arrow H in the display indicates
that there are further options.
If you do not make a selection in the
Settings menu and in its sub-menus
within approx. 15 seconds, the display
will revert to the previous menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Time of day
Drying levels
First select either a 24 hour or 12
hour clock.
You can alter the drying levels for the
Cottons and Minimum iron
programmes.
Then set the current time of day.
The bar chart shows you the setting.
The machine is delivered with a
medium setting set as standard.
24 h clock
(the machine is delivered with this
option selected)
Depending on the setting, the
programme duration will be shorter
(Damper) or longer (Drier).
12 h clock
The display will then switch to the
screen for setting the time of day.
Extending the cooling down
time
00 00
:
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to
handle.
Set time of day
^ Set the hour with the - and + buttons
and confirm your setting by pressing
the OK button. Now set the minutes.
The display will return to the Settings
menu.
The bar chart shows you the setting.
The machine is delivered with 0 mins
(normal cooling down period) set as
standard.
Important: The time of day can also be
set by pressing the m button after
switching the tumble dryer on, before
selecting a programme.
You can select an extended cool down
time in 2 minute increments up to a
maximum of 18 minutes.
You cannot extend the cooling down
time for the Warm air, Cool air, Woollens
Hand care or Smoothing programmes.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Airways indicator
Lock
Fluff should be removed after drying.
The Clean the filters message will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code
after switching the dryer on. Otherwise
the dryer cannot be operated.
You will have an idea of how often this
should be done after a few drying
programmes.
The door is not locked and can be
opened at any time.
To activate the lock
Off
Clean the filters does not appear
^ Select Activate and confirm your
selection.
Heavy
Clean the filters only appears when
there is a heavy build-up of fluff
^ The display will now request that a
code is entered. The code is 250 and
cannot be altered.
Normal
Factory default setting
To enter the lock code
Light
The code is: 250
Clean the filters appears when there is
only a small build-up of fluff
A tick L will appear beside the
language to show that it has been set.
0
_
_
Enter lock code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now set the second number.
^ Repeat the process until all three
numbers have been entered.
^ After the last number has been
entered, press the OK button.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Yes
2
5
0
No
Confirm lock code
^ Confirm the code with the OK button
or if you want to correct a mistake,
press the – button.
The lock will now be activated when the
dryer is switched off.
To unlock the dryer
When the machine is switched on
again, the display will request the lock
code.
^ Enter lock code 250 as described
above and confirm the entry.
Entry OK
Lock deactivated
W
The dryer is now unlocked.
To deactivate the lock
Proceed as for activating the lock.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Buzzer
Keypad tones
The buzzer has two volumes.
An audible tone sounds each time a
button is pressed.
Normal
The buzzer sounds at the end of a
programme. (The machine is delivered
with this option set as standard).
A tick L will appear beside the option
to show that it has been set.
The machine is delivered with the
option: Off set as standard.
Loud
The buzzer sounds at maximum volume
at the end of a programme.
Standby
The buzzer will always sound when
there is a fault, even if it has been
switched off.
To save energy, the display goes out
after 10 minutes and the Start/Stop
button will start flashing slowly.
A tick L will appear beside the option
to show that it has been set.
There are two options:
Active (On)
Display contrast
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
Display brightness
– when the Start/Stop button is
pressed.
There are ten different display
contrast and display brightness
settings.
– at the end of a programme.
Not in current prog.
The bar chart shows you the setting.
Stand-by comes on:
– if a programme is not selected after
the machine has been switched on.
Pressing one of the buttons switches
the display back on again.
A tick L will appear beside the option
to show that it has been set.
The machine is delivered with the
option: On set as standard.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/0505
M.-Nr. 06 465 800 / 00
en - GB
Download from Www.Somanuals.com. All Manuals Search And Download.
|