Quick Installation Guide
EtherFast 10/100M Switch
Model No.: SP616EB
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
y
Compliant with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
and IEEE802.3x flow control
y
Supports speed (10/100Mbps) and duplex mode(Half/Full) and
auto-detection
y
y
y
y
y
y
Supports MDI/MDI-X auto crossover
Supports full and half duplex operation on all ports
Supports back-pressure (Half/Full) and flow control (IEEE 802.3x)
Supports extensive LED indicators for network diagnostics
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error
packets
y
10” and 19” rack-mountable
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical Description
SP616EB front view
Please refer to the following table for LED definition.
LED
Status
On
Operation
POWER
Power is on.
Off
Power is off.
On/Green
Connection established.
LNK/ACT
Blink/Green
Off
Transmitting or receiving data.
No link.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Installation is easy-- simply connect the cables and the power cord.
The system is ready, and you can use all the features.
Connect each station to the switch by twisted-pair cable. Plug one of
the RJ-45 connectors into a RJ-45 port of the switch, and plug the
other RJ-45 connector into the station’s network adapter. Power on
the switch and then the system is ready.
All ports could be used to connect with another switch. As all the
ports support auto-uplink (MDI / MDI-X) function, user can choose to
use a straight cable or a crossover cable to make a switch-to-switch
connection.
For cable selection, refer to the following table：
Network
Speed
Connector
Cable Type
Max.
Length
100 m
100 m
10BaseT
RJ-45
Cat. 3, 4, 5 UTP/STP
Cat. 5 UTP/STP
100BaseTX RJ-45
Note: To prevent costly equipment damage and downtime, please
consider installing a surge suppression device or a UPS
(Un-interrupted Power Supply).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
IEEE802.3, IEEE802.3u, IEEE802.3x,
compliant
Standard
Interface
16 * 10/100M RJ-45 ports
10BASE-T: Cat. 3, 4, 5 UTP/STP
100BASE-TX: Cat. 5 UTP/STP
8K
Cable Connections
MAC address
Buffer Memory
160K Byte for the whole system
Network speed:10Mbps and 100Mpbs
Duplex mode: Full and Half
Auto Uplink (Auto MDI / MDI-X)
10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps
FCC Class A, CE
NWay Protocol
Uplink
Filtering/Forwarding
Rate
Emission
Operating Temperature 0 o - 40 o C (32 o - 104o F)
Operating Humidity
Dimension (mm)
Weight (kg)
10% - 90% (Non-condensing)
267 × 161 × 44
1.2
100 ~ 240V AC, 50/60Hz
Full range internal power supply
Power Supply
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Mark Warning
This equipment complies with the requirements relating to
electromagnetic compatibility, the essential protection requirement
of Council Directive 89/336/EEC on the approximation of the laws of
the Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it
may be possible that information in this document is not up-to-date.
Please check with your local distributors for the latest information.
No part of this document can be copied or reproduced in any form
without written consent from the company.
Trademarks:
All trade names and trademarks are the properties of their
respective companies.
Copyright © 2005, All Rights Reserved
P/N:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|