Magnadyne Automobile Electronics MKE 300A User Manual

Transmitters  
Turns On / Off Porch Light  
(Can be Programmed to  
Press Simultaneously to  
Turn On / Off Porch Light  
Unlock Cargo Doors)  
Locks All Doors  
(Including Cargo)  
Unlocks Entry  
Doors  
Locks All Doors  
(Including Cargo)  
Unlocks Entry  
Doors  
Unlocks Cargo Doors  
(Can be Programmed to  
Turn On / Off Porch Light)  
Locks All  
Cargo Doors  
Unlocks All  
Cargo Doors  
User's Manual  
Keypad Keyless  
Entry System  
Housing  
Program  
Button  
LED  
Antenna  
Programming  
A. 3-Button Transmitter Programming  
B. 4-Button Transmitter Programming  
Note: This mode will only retain the last 4 remote  
transmitters programmed. If the transmitter memory  
is exceeded, the security system will start deleting  
transmitters from memory in chronological order.  
1. Turn the ignition switch to the "ON" position.  
2. Within 15 seconds, push the Program Button  
(located on back of the housing) 3 times. The  
onboard LED will be flashing and the beeper will  
emit a long chirp to indicate the system is in  
Transmitter Programming mode.  
Note: This mode will only retain the last 4 remote  
transmitters programmed. If the transmitter memory  
is exceeded, the security system will start deleting  
transmitters from memory in chronological order.  
1. Turn the ignition switch to the "ON" position  
within 15 seconds.  
Models:  
MKE-300A / MKE-400A  
2. Push the Program Button (located on back of  
the housing) 5 times. The onboard LED will be  
flashing and the beeper will emit a long chirp to  
indicate the system is in Transmitter  
Programming mode.  
3. Press and hold any button on the transmitter  
until the onboard LED turns on for 2 seconds and  
the beeper responds with a confirming chirp, indi-  
cating the signal has been stored into memory.  
4. If you have additional transmitters (up to 4)  
that need to be programmed, repeat step 3 for  
each transmitter.  
3. Press and hold any button on the transmitter  
until the onboard LED turns on for 2 seconds and  
the beeper responds with a confirming chirp, indi-  
cating the signal has been stored into memory.  
4. If you have additional transmitters (up to 4)  
that need to be programmed, repeat step 3 for  
each transmitter.  
Exit: Turn the ignition switch to the "OFF" position, or  
leave it for 15 seconds. The onboard LED turns off  
and the beeper will emit 3 long chirps to confirm exit.  
Exit: Turn the ignition switch to the "OFF" posi-  
tion, or leave it for 15 seconds. The onboard LED  
turns off and the beeper will emit 3 long chirps to  
confirm exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo Computer Accessories 1814 User Manual
LG Electronics Range LDE3031ST User Manual
LG Electronics Refrigerator LSC 21943ST User Manual
Lincoln Electric Welding System IM575 User Manual
Linksys Switch SR2246 User Manual
Magic Chef Beverage Dispenser MCWC16MCG User Manual
Maytag Dishwasher MDB4949SD User Manual
Maytag Oven CWE9030B User Manual
Maytag Washer Dryer MD491 User Manual
Metabo Irrigation System Hydrostop User Manual