Metra Electronics Automobile Accessories 99 7335S User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-7335S  
HYUANPDPALIICAVTeIOrNaScruz  
2007-2010  
Automatic climate control only  
99-7335S  
KIT FEATURES  
• DIN Radio Provision with Pocket  
• ISO Mount Radio Provision with Pocket  
• Double DIN Radio Provision  
• Stacked ISO Mount Units Provision  
Painted to match factory dash-”S”=Silver  
KIT COMPONENTS  
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets  
• E) Double DIN Trim Plate • F) Pocket  
A
C
D
E
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
Harness:  
• 70-1004 - KIA/Hyundai harness 2004-up  
• 70-7303 - KIA/Hyundai harness 2009  
Antenna Adapter:  
• 40-KI11 - KIA antenna adapter 2007-up  
F
TOOLS REQUIRED:  
Small Flat Blade Screwdriver/ Panel Removal Tool  
• Phillips Screwdriver  
1-800-221-0932  
© COPYRIGHT 2009 METRA ELECTRONICS CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
95-7335S DASH DISASSEMBLY  
HYUNDAI VERACRUZ 2007-2010  
A
1
2
3
4
Disconnect the negative battery  
terminal to prevent an accidental short  
circuit.  
Unclip and remove the side trim  
panels. (Tip: start at the bottom of the  
panels) (Figure A)  
Remove (6) Phillips head screws  
securing the radio trim panel and  
remove trim panel. (Figure B)  
Remove (4) Phillips screws securing  
the climate control, (2) Phillips screws  
securing the clock display and (4)  
Phillips screws securing the pocket  
from the radio trim panel. (Figure C)  
B
Continue to kit preparartion.  
C
CLOCK DISPLAY-REAR VIEW  
RADIO HOUSING  
REAR VIEW  
CLIMATE CONTROL-REAR VIEW  
POCKET-REAR VIEW  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7335S KIT ASSEMBLY  
KIT PREPARATION  
Attach the climate control, pocket and the clock display into the 99-7335S radio  
1
housing using the factory hardware. (Figure A)  
Continue to kit assembly.  
A
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7335S KIT ASSEMBLY  
DIN MOUNT RADIO PROVISION WITH POCKET  
*Note: Refer also to the instructions included with the aftermarket radio.  
A
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from Metra  
or AXXESS. Re-connect the negative  
battery terminal and test the unit for  
proper operation.  
1
2
Slide the DIN cage into the Radio  
Housing and secure by bending the  
metal locking tabs down. (Figure A)  
3
Snap the pocket into the bottom  
opening of the radio housing.  
B
(Figure B)  
4
5
Slide the aftermarket head unit into  
the cage and secure. (Figure C)  
Reassemble dash in reverse order of  
disassembly.  
C
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7335S KIT ASSEMBLY  
ISO MOUNT RADIO PROVISION WITH POCKET  
*Note: Refer also to the instructions included with the aftermarket radio.  
A
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from Metra  
or AXXESS. Re-connect the negative  
battery terminal and test the unit for  
proper operation.  
1
2
3
4
Mount the ISO Brackets to the head  
unit with the screws supplied with  
the unit. (Figure A)  
Snap the pocket into the bottom  
opening of the radio housing.  
(Figure B)  
B
Slide the head unit into the radio  
opening until the side clips engage.  
(Figure C)  
5
6
Snap the Trim plate into the Radio  
Housing. (Figure C)  
Reassemble dash in reverse order of  
disassembly.  
C
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7335S KIT ASSEMBLY  
DOUBLE DIN/STACKED ISO MOUNT  
UNITS RADIO PROVISION  
*Note: Refer also to the instructions included with the aftermarket radio.  
A
1
Locate the factory wiring harness in  
the dash. Metra recommends using  
the proper mating adapter from Metra  
or AXXESS. Re-connect the negative  
battery terminal and test the unit for  
proper operation.  
2
3
Cut and remove the center bar from  
the radio housing. (Figure A)  
Snap the Double DIN brackets to the  
inside edge of the Double DIN trim  
plate. (Figure B)  
B
4
Slide the Double DIN head unit or  
stacked ISO head units into the  
bracket/radio housing assembly and  
secure the Double DIN head unit or  
stacked ISO head units to the  
assembly using the screws supplied  
with the radio. (Figure C)  
C
5
6
Snap the Double DIN trim plate into the  
Radio Housing. (Figure C)  
Reassemble dash in reverse order of  
disassembly.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
99-7335S INSTRUCTIONS  
1-800-221-0932  
REV. 09/02/09 © COPYRIGHT 2009 METRA ELECTRONICS CORPORATION INST99-7335S  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox Hearth Indoor Fireplace 875027M User Manual
LG Electronics DVD Player GSA 5120D User Manual
LG Electronics Washer 3828ER3052K User Manual
LifeSource Blood Pressure Monitor UA 787EJ User Manual
Logitech Headphones 350vi User Manual
Lok8u Computer Hardware K8SLI User Manual
Lynx Network Router L 325 User Manual
Makita Impact Driver 6911HD User Manual
Maytag Refrigerator W10175446B User Manual
Maytag Washer W10755025A User Manual