Owner's Manual
ZV450MW8A
DIGITAL VIDEO DISC RECORDER & VIDEO CASSETTE RECORDER
WITH DIGITAL TUNER
THANK YOU FOR CHOOSING MAGNAVOX.
NEED HELP FAST?
READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE
USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE.
IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE,
YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM
OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
© 2007 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode. (Fig.
A)
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
FIGURE A
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXCEPTION: A product that is meant for uninterrupted service
and, that for some specific reason, such as the possibility of the
loss of an authorization code for a CATV converter, is not
intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
6. Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8. Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or
14. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
15. Power Lines - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines
or circuits as contact with them might be fatal.
sold with the product. Any mounting of
the appliance should follow the
manufacturer’s instructions and should
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
use a mounting accessory recommended
by the manufacturer. An appliance and
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
product.
cart combination should be moved with
care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be blocked
by placing the product on a bed, sofa, rug, or other similar
surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have
been adhered to.
10. Power Sources - This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home, consult
your appliance dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance
this indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat - This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA No. 70, provides
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Installation Location
Supplied Accessories
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
remote control (NB555UD) with batteries (AAAx2)
• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
RF coaxial cable (WPZ0901TM002)
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
owner's manual (1VMN23648A)
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place or
after heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.
quick guide (1VMN23649A)
Notice for Progressive Scan Output
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 525 (480) progressive
scan output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding your TV set compatibility with
this 525p (480p) DVD player, please contact our customer
service center.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 93-96 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn off, unplug the power plug and
please call our help line mentioned on the front page
to locate an Authorized Service Center.
1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.
Note
• Remember to read the instructions along with the video
head cleaner before use.
Cleaning the cabinet
• Clean video heads only when problems occur.
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
•
With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
Cleaning the disc lens
• If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
•
With a digital camera (including built-in
camera of cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
Manufactured under license from
Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of
Dolby Laboratories.
Auto head cleaning
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause this
problem. If a streaky or snowy picture appears during
playback, the video heads in your unit may need to be
cleaned.
Dolby Digital Recording
“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable
DVD discs. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allow-
ing for higher video resolution or extended recording
time on each DVD. DVDs created using Dolby Digital
Recording will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Recording
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .9
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 37
BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 38
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 38
BASIC RECORDING &
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 39
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 44
OVERWRITING UNNECESSARY TITLE . . . . . . . . . . . . . 45
Overwriting from the Beginning of the Title. . . . . . . . 45
Overwriting in the Middle of the Title. . . . . . . . . . . . . . 45
Hints for Overwriting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 47
Connection to an External Device. . . . . . . . . . . . . . . . . . 47
Recording from an External Device . . . . . . . . . . . . . . . . 48
BI-DIRECTIONAL DUBBING . . . . . . . . . . . . . . . . . . . . . . 49
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 51
PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . 52
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Connections
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 15
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 16
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 17
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 19
Basic Setup
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Finding the Viewing Channel on Your TV . . . . . . . . . . 20
Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . 21
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Switching DVD / VCR Mode. . . . . . . . . . . . . . . . . . . . . . . . 24
How to Insert a Disc / Cassette Tape . . . . . . . . . . . . . . . 24
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . 27
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 31
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playback
Editing
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 54
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 57
Playing Back an Audio CD and a CD-RW/-R
INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 68
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Clearing Chapter Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Setting Pictures for Thumbnails. . . . . . . . . . . . . . . . . . . . 75
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Setting or Releasing Disc Protect . . . . . . . . . . . . . . . . . . 78
Erasing Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Making Edits Compatible. . . . . . . . . . . . . . . . . . . . . . . . . . 80
with MP3 Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 59
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 60
Skipping TV Commercials During Playback. . . . . . . . . 60
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 61
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
SELECTING THE FORMAT OF AUDIO AND VIDEO . . 66
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 66
Switching Virtual Surround System . . . . . . . . . . . . . . . . 67
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 67
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Function Setup
LIST OF SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
VCR Functions
VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . . 91
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . 95
Note for Output Jacks on the Rear Panel . . . . . . . . . . . 95
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after
that. The following features are offered with this unit.
VCR mode
Recording
Quick search for what you want to watch:
This unit is compatible with DVD+RW/DVD-RW, which
are rewritable repeatedly and DVD+R/DVD-R, which are
available for recording once. Even if you choose DVD-
RW/DVD-R, these discs will automatically be recorded in
the DVD+VR mode. Also, this unit allows you to record
to the cassette tape. You can choose either one for your
convenience.
You can easily find the part you want to watch using the
index search/time search functions. An index mark will be
assigned at the beginning of each recording you make.
For time search function, you can go to a specific point on
a cassette tape by entering the exact amount of time you
wish to skip.
DVD mode VCR mode
Up to 12 program recording:
You can program the unit to record up to 12 programs
within a one-month period. Daily or weekly program
recordings are also available.
Editing
Deleting titles:
You can delete titles which you do not need anymore.
Putting names on titles:
You can put your favorite names on titles.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer. Every
time [REC I] is pressed during recording, the recording
time will be increased by 30 minutes up to 6 hours for
DVD, and 8 hours for VCR. The recording automatically
stops when the recording time you set is reached or the
disc is full.
Setting / clearing chapter marks:
You can set / clear chapter marks on titles.
Hiding chapters:
To keep others from playing back some chapters without
permission, you can hide chapters.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Dubbing mode:
You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the
DVD or a cassette tape is not copy protected.
You cannot record on a cassette tape when its erase-pro-
tection tab is removed.
Dividing titles:
You can divide a title into 2 or more.
Putting name on disc:
You can put your favorite disc name.
Left channel stereo recording:
This unit can record the sound of the left channel monau-
Compatibility
Available for playing back discs on a regular DVD
player:
ral input as left and right channels automatically.
DVD mode
Recorded discs can be played back on regular DVD
players, including computer DVD drives compatible
with DVD-video playback. Although DVD+R are playable
on other units without finalization in most cases, it
is recommended to finalize in order to stabilize the
performance. For DVD-RW/-R, you need to finalize the
recorded discs to play back on other DVD players.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set before
attempting to record.
Automatic title list making:
The unit makes a title list with the index automatically.
Playback
DVD mode
Others
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can experi-
ence the theater surround sound from discs with sur-
round sound system.
DVD mode
Progressive scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter or time.
Virtual surround system:
You can enjoy stereophonic space through your existing
2 channel stereo system.
Playing back MP3 files:
You can enjoy MP3 files which are recorded on CD-RW/-R.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Symbols Used in this Owner’s Manual
To specify for what disc type each function is, we put
the following symbols at the beginning of each item to
operate.
* DVD-RW/-R recorded in VR mode or non compatible
recording format are not playable.
* DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 79).
* DVD-R recorded in the mode other than +VR is not
recordable on this unit.
Symbol Description
For Recording, Playing Back, and Editing
Description refers to DVD+RW
Description refers to DVD+R
Description refers to DVD-RW
Description refers to DVD-R
For Recording and Playing Back
Description refers to VHS tapes
Use only cassettes marked VHS (
)
For Playback only
Description refers to DVD-video
Description refers to audio CD
Description refers to video CD with PBC function
Description refers to video CD without PBC
function
Description refers to CD-RW/-R with MP3 files
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
23 22
21 2019 18 17 16
15
14 13 12 11 10 9 8* 7 6
5
4
( ) The unit can also be turned on by pressing these buttons or inserting a cassette tape.
*
1. Cassette compartment (VCR)
Insert a cassette tape here.
14. CHANNEL L / K buttons (DVD/VCR)
Press to change the channel up and down.
2. OPEN/CLOSE A button (DVD)*
Press to open or close the disc tray.
3. Disc tray (DVD)
15. Display
Refer to “Front Panel Display” on page 14.
16. Infrared sensor window (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
17. RECORD I button (VCR)
Place a disc when it is open.
4. AUDIO input jacks (E2) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
5. VIDEO input jack (E2) (DVD/VCR)
Use to connect external device with an RCA video
cable.
Press once to start a recording. Press repeatedly to
start the one-touch timer recording.
18. PLAY B button (VCR)
Press to start playback.
19. STOP/EJECT
6. S-VIDEO input jack (E2) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
C
A button (VCR)
Press to remove the cassette tape from the cassette
compartment.
7. RECORD I button (DVD)
Press to stop cassette tape playback or recording.
Press to stop the proceeding timer recording in VCR.
20. F.FWD D button (VCR)
Press once to start a recording.
Press repeatedly to start the one-touch timer
recording.
Press to rapidly advance the cassette tape, or view the
picture rapidly in forward during playback (forward
search).
8. PLAY B button (DVD)*
Press to start or resume playback.
9. STOP C button (DVD)
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
10.DVD indicator
Lights up when the DVD output mode is selected.
11.SOURCE button (DVD/VCR)
Press to select the component you wish to operate.
12.VCR indicator
Lights up when the VCR output mode is selected.
13.D.DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
21. REW E button (VCR)
Press to rewind the cassette tape, or to view the
picture rapidly in reverse during playback (rewind
search).
22. STANDBY-ON y button (DVD/VCR)
Press to turn on and off the unit.
23.POWER-ON indicator (DVD/VCR)
Red LED lights up when power is on.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
1
2
OUT
IN
DVD
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT
VIDEO OUT
Y
L
L
ANTENNA
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
12 11 10 9 8 7 6 5 4
3
1. AC Power Cord (DVD/VCR)
9. COMPONENT VIDEO OUT jacks (DVD only)
Connect to a standard AC outlet to supply power to this
unit.
Use to connect a TV monitor with component video
inputs with a component video cable.
2. ANTENNA OUT jack (DVD/VCR)
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV monitor.
3. ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
4. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
5. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
6. VIDEO IN jack (E1) (DVD/VCR)
Use to connect external device with an RCA video
cable.
10. S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
11. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
12. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
7. AUDIO IN jacks (E1) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
8. S-VIDEO IN jack (E1) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
Open the cover.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
Insert batteries.
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
2
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
16feet (5m)
30˚
23feet (7m)
16feet (5m)
30˚
STANDBY-ON
Close the cover.
1
3
4
18
19
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
3
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
5
6
7
20
21
22
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Note
23
8
9
11
24
26
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
j
F
i
C
B
25
27
10
h
g
• Do not mix new and old batteries together.
CHANNEL
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
--
+
12
13
14
15
16
17
28
29
30
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
31
33
SEARCH
32
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
1. DISPLAY button (DVD/VCR)
20.CLEAR button (DVD/VCR)
• Press to display the display menu on or off.
2. DTV/TV button (DVD/VCR)
• Press to switch between digital TV (DTV) mode and
analog TV (TV) mode.
DVD mode:
• Press to clear the password once entered or to can-
cel the programming for CD or to clear the selected
marker number, etc.
3. SOURCE button (DVD/VCR)
VCR mode:
• Press to select the appropriate input.
4. Number/Character buttons (DVD/VCR)
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main menu.
• Press to enter title names.
• Press to reset the tape counter.
21.SETUP button (DVD/VCR)
• Press to display the main menu.
• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.
• Press to start the index/time search in VCR mode.
5. Confirm ( • ) button (DVD/VCR)
Analog mode:
• Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
22.Cursor K / L / { / B buttons (DVD/VCR)
• Press to select items or settings.
23.RETURN button (DVD/VCR)
• Press to return to the previously displayed menu screen.
24.PLAY B button (DVD/VCR)
• Press to start playback or resume playback.
25.NEXT G button (DVD)
• Press to confirm the major / minor channel
selection made by [the Number buttons].
6. DISC MENU button (DVD)
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to for-
ward the playback step by step.
• Press to display the disc menu.
7. OK button (DVD/VCR)
• Press to confirm or select menu items.
8. TITLE button (DVD)
26.FFW D button (DVD/VCR)
DVD mode:
• Press to display the title list.
9. PREV H button (DVD)
• During playback, press to fast forward playback.
• When playback is paused, press to slow forward playback.
VCR mode:
• During playback, press to return to the beginning of
the current chapter, track or file.
• During playback, press to rapidly advance the
cassette tape or view the picture rapidly in forward.
• When playback is paused, press to view the cassette
tape in slow motion.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
10.REW E button (DVD/VCR)
DVD mode:
27.STOP C button (DVD/VCR)
• During playback, press to fast reverse playback.
• When playback is paused, press to slow reverse playback.
VCR mode:
• Press to stop playback or recording.
DVD mode:
• Press to exit from the title list.
• During playback, press to rewind the cassette tape
or to view the picture rapidly in reverse.
11.PAUSE F button (DVD/VCR)
• Press to pause playback or recording.
28.DVD button
• Press to select the DVD output mode.
29.TIMER button (DVD/VCR)
• Press to display the timer programming list.
30.AUDIO button (DVD/VCR)
12.CHANNEL
/
buttons (DVD/VCR)
DVD mode:
DTV mode:
• Press to change the channel up and down.
VCR mode:
• Press to change the channel up and down.
• Press to adjust the tracking during playback or in slow
motion of the cassette tape.
• While playback is in still mode, you can adjust the
picture blurred vertically.
• Press to switch the audio language for digital TV.
DVD mode:
• Press to display the audio menu during playback.
VCR mode:
• During playback of a Hi-Fi videotape, press to
change the audio out setting.
31.RAPID PLAY button (DVD)
13.VCR button
• During playback, press to play back in a slightly
faster/slower mode with keeping the audio quality.
32.TIMER SET button (DVD/VCR)
• Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.
• Press to select the VCR output mode.
14.REC MODE button (DVD/VCR)
• Press to switch the recording mode.
15.REC I button (DVD/VCR)
• Press once to start a recording.
• Press repeatedly to start the one-touch timer recording.
16.CM SKIP button (DVD)
• During playback, press to skip 30 seconds.
17.SEARCH button (VCR)
33.D.DUBBING button (DVD/VCR)
• Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.
• Press to call up the index or time search menu.
18.STANDBY-ON y button (DVD/VCR)
• Press to turn the unit on and off.
19.OPEN/CLOSE A button (DVD/VCR)
DVD mode:
Note
• If you turn off this unit, [OPEN/CLOSE A] on the remote
• Press to open or close the disc tray.
VCR mode:
• Press to remove the cassette tape from the cassette
compartment.
control is not available.
Be sure to use [OPEN/CLOSE A] or [STOP/EJECT
C
A]
on the unit.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
2
3
DTV BS CS
DR
CD
VCR
1
PM
4
DB HDD
DVD
5
1.
: Appears when the timer
programming or OTR has
been set or is proceeding.
: Flashes when all timer
recordings have been
finished.
: Appears when this unit is in
DVD output mode.
: Appears when the timer
recording is proceeding in
DVD.
: Appears when DVD is in the
timer recording standby
mode.
: Flashes when a program
cannot be performed for
some reasons.
DVD
DB
: Appears in the afternoon
with the clock display.
PM
2.
: Appears when the channel is
in DTV mode.
: Flashes when there is an error
in programming.
3. Title / track / file and chapter mark
: Appears during recording
process.
: Flashes when a recording is in
pause.
: Appears when indicating a
title / track / file number.
: Appears when indicating a
chapter number.
: Appears during VCR to DVD
duplication process.
: Appears during DVD to VCR
duplication process.
: Appears when this unit is in
DVD output mode and a disc
is in the unit.
: Appears during duplication
process.
4. Current status of the unit
: Appears when playback is in
pause, or in step by step
playback.
5. Displays the following
• Elapsed playback time
: Appears when playing back a
disc, or a cassette tape.
: Appears when this unit is in
VCR output mode and a
• Current title / chapter / track /file
number
• Recording time / remaining time
• Clock
cassette tape is in the unit.
: Appears during slow forward
/ reverse playback.
: Appears during duplication
process.
• Selected channel number
: Appears when this unit is in
VCR output mode.
: Appears when the timer
recording is proceeding in VCR.
• Remaining time for one-touch
timer recording
• VCR tape counter
VCR
: Appears when VCR is in the
timer recording standby mode.
: Flashes when a program
cannot be performed for
some reasons.
Display Message
Appears when the disc tray is
opening.
Appears when data is being
written on a disc.
Appears when the PBC function
is activated. (Video CD playback
only. Refer to page 55.)
Appears when the disc tray is
closing.
Appears when a disc is loaded
on the disc tray.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
Disconnect the power cord of your TV from the AC outlet.
1
2
Disconnect RF coaxial cable from antenna input jack of your TV.
VHF / UHF
antenna
rear of your TV
or
ANT. IN
1
RF coaxial cable
cable TV
company
disconnect
2
disconnect
Connect cables to the unit.
Make the basic connection as illustrated below.
3
rear of this unit
OUT
DVD/VCR
DD
DVD/VCR
S-VIDEO IN ---AUDIO---OUT
L
L
S-VIDEO
IN ---AUDIO---OUT
IN
ANTENNA
VHF / UHF
antenna
R
R
IN
IN ---VIDEO---OUT
OUT
L
R
IN
IN
IN ---VIDEO---OUT
ANTENNA
or
rear of your TV
RF coaxial cable
RF coaxial cable
cable TV
company
This connection is for
TV loop through only
RCA audio
cable
RCA video
cable
R
L
ANT. IN
AUDIO IN VIDEO IN
Plug in the power cord of this unit and your TV to the AC outlet.
4
rear of your TV
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
connect
*Once connections are completed, turn on the TV and
begin initial setting.
rear of this unit
Channel scanning is necessary for the unit to memorize
all available channels in your area.
(Refer to “INITIAL SETTING” on page 25.)
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• Antenna out is for tuner pass through only. DVD playback through the RF is not possible.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available
stereo audio/video RF modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to.
For more details, follow the manual supplied with the RF modulator.
rear of this unit
OUT
DVD/VCR
DVD/VCR
OPONENT S-VIDEO IN ---AUDIO---OUT
VDEO OUT
L
L
S-VIDEO
IN ---AUDIO---OUT
IN
ANTENNA
R
R
IN
IN ---VIDEO---OUT
L
VHF / UHF
antenna
rear of your TV
R
IN
OUT
IN
RF coaxial
cable
IN ---VIDEO---OUT
or
ANTENNA
cable TV
company
RCA audio
cable
RCA video
cable
RF coaxial cable
ANT. IN
R
L
3
4
TO TV
AUDIO IN VIDEO IN
CHANNEL
ANT. IN
Set channel 3 or 4
rear of your
RF modulator
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• RF modulator is not supplied with this unit. You need to purchase it at your local store.
• The quality of picture may become poor if this unit is connected to an RF modulator.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A CABLE / SATELLITE BOX
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
S-video cable
e.g.)
RCA video cable
or
rear of this unit
RCA audio
cable
OUT
DVD/VCR
IN --- AUDIO---OUT
DVD/VCR
OUT
IN
S-VIDEO IN ---AUDIO---OUT
I
S-VIDEO
L
L
IN
ANTENNA
R
R
IN
R
L
S-VIDEO
OUT
IN ---VIDEO---OUT
AUDIO OUT VIDEO OUT
L
cable/satellite
box
ANTENNA
R
IN
IN ---VIDEO---OUT
RF coaxial
cable
This connection is
for TV loop
through only
RF coaxial
cable
ANT. IN
RF OUT ANT. IN
rear of your TV
satellite
dish
RCA audio
cable
RCA video
cable
RF coaxial
cable
or
R
L
VIDEO IN
AUDIO IN
cable TV
company
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack or COMPONENT VIDEO OUT jack
(DVD only) for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your existing device.
VCR and basic DVD connection
RCA audio
cable
TV
RCA video
cable
R
L
VIDEO
IN
AUDIO IN
DVD/VCR
IN ---AUDIO---OUT
S-VIDEO
this unit
L
L
DVD
UDIO
OUT
DVD/VCR
- AUDIO- -OUT
DIGITAL
A
S-VIDEO COMPONENT S-VIDEO IN
--
-
VIDEO OUT
A
UDIO OUT
Y
L
L
R
R
PB
/CB
IN
L
R
R
OUT
IN
COAXIAL
IN
--
-VIDEO- -OUT
-
PR
/CR
R
IN ---VIDEO---OUT
AUDIO OUT (DVD/VCR)
VIDEO OUT
Available on DVD only
TV
Method 1
Method 2
analog audio
good picture
better picture
COMPONENT
VIDEO IN
S-VIDEO IN
Y
(Green)
PB/CB
(Blue)
PR/CR
(Red)
R
L
AUDIO IN
and
or
RCA audio cable
S-video cable
component video cable
DVD
DVD
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONEN
this unit
(Green)
VIDEO OUT
VIDEO OUT
VIDEO OUT
Y
Y
Y
DVD
S-VIDEO
(Blue)
(Red)
DIGITAL
AUDIO
OUT
A
UDIO OUT
Y
P
PB
/CB
PB
/CB
P
/C
L
L
L
OUT
OUT
L
OUT
COAXIAL
P
COAXIAL
COAXIAL
R
COAXIAL
PR
/CR
PR
/CR
PR
/CR
R
R
R
S-VIDEO OUT
COMPONENT
VIDEO OUTPUT
AUDIO OUT (DVD)
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when
you made either S-video or component video out connection.
• When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT
jack.
To set progressive scan mode, refer to page 88
• This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the
traditional output system. To utilize this feature, you must set “Progressive Scan” to “ON”.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
2 Channel Analog Audio Connection
stereo system
Digital Audio Connection
Dolby Digital decoder
audio
COAXIAL
digital audio
coaxial input
jack
R
L
AUDIO IN
analog audio
input jacks
digital audio
coaxial cable
or
RCA audio cable
DVD
DVD/VCR
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
S-VIDEO
IN --- AUDIO---OUT
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT
VIDEO OUT
VIDEO OUT
Y
L
Y
OUT
IN
DVD
DVD/VCR
-OUT
DVD
DVD/VCR
-OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO-
-
DIGITAL
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN --- AUDIO-
-
VIDEO OUT
VIDEO OUT
AUDIO OUT
Y
L
L
Y
L
L
PB
PB
/CB
L
R
L
ANTENNA
OUT
/CB
IN
OUT
PB
/CB
PB
/CB
L
R
R
L
R
R
OUT
IN
OUT
IN
COAXIAL
IN ---VIDEO---OUT
IN ---VIDEO---OUT
PR
/CR
PR
/CR
COAXIAL
COAXIAL
R
R
IN ---VIDEO---OUT
PR
/CR
PR
/CR
R
R
this unit
AUDIO OUT
DIGITAL AUDIO OUTPUT
*MD deck or DAT deck can be also connected through coaxial jack.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Setting
Setup >General Setting >Playback >Disc Audio >
Dolby Digital
Connection
If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder.
Stream
Connecting to an MD deck or DAT deck.
If not connected to any external devices.
PCM
PCM
* To complete these settings, refer to pages 84-85.
Note
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
After you have made all the
necessary connections, press
STANDBY-ON
1
2
3
[STANDBY-ON y] to turn on the unit.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Turn on your TV.
• If connected to your VCR make sure it is
switched off or in standby mode before
proceeding.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Press “2” on the TV’s remote control,
then press channel down button
repeatedly until you see “Initial
Setup” menu.
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Initial Setup
s
B
OK
p
TITLE
RETURN
OSD Language
English
Français
Español
j
F
i
B
h
g
C
CHANNEL
--
+
This is the correct viewing channel (external
input channel) for the recorder.
REC MODE VCR
DVD
TIMER
AUDIO
• For some TVs, there may be a button on the
TV’s remote control that accesses the external
input channel. It may be labeled “SOURCE”,
“AV”, or “SELECT”. In such case, press it
repeatedly. Refer to your TV’s user manual for
details.
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
• If more than 10 minutes have past since you
have turned on the unit, you may see the
MAGNAVOX screen saver instead of “Initial
Setup” menu.
MAGNAVOX screen saver:
Input Mode Names for Common TV Brands (Example)
Admiral AUX
Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
Curtis
LINE1, LINE2,
00, 90, 91, 92, 93
Mathis
00, 90, 91, 92, 93
GE
INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Hitachi
JVC
INPUT, AUX
VIDEO, VIDEO 1, Sharp
VIDEO 2, VIDEO 3
Sanyo
VIDEO
00
Kenwood AUX
Sony
VIDEO1, VIDEO2,
VIDEO3
Proceed to step 2 in “INITIAL
SETTING” on page 25.
LXI-Series 00
Magnavox AUX CHANNEL
Toshiba
Zenith
TV/GAME
00
4
Note
• Video input selection varies for different brand’s
models of TVs.
• Consult your TV manufacturer if none of the above is
successful.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
Guide to On-Screen Display / Menu
The on-screen display changes in the following order
Disc Information / Menu
as you press [DISPLAY].
DVD mode
6
OFF
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
DTV Program Guide (only in DTV mode)
CH 10
Disc Information/Menu (only in DVD mode)
5
1
2
or
VCR Information (only in VCR mode)
SP(2Hr)
1:53
Title Name Information (only in DVD mode)
4
3
(only when DVD+RW/DVD+R/DVD-RW/DVD-R
is in playback)
* This is an example screen only for explanation.
Displayed items vary depending on the disc you
inserted.
or
File Name Information (only in DVD mode)
(only when a CD with MP3 files is in playback)
1. Indicates a disc type and format mode.
2. Indicates a channel number or selected external input
channel.
DTV Program Guide
3. Indicates a recording mode and possible recording
time left.
1
5
4. Indicates an operation status.
5. Each icon means:
DTV 6.1
KABC
A Day of Memories
25
: Search
: Audio
: Subtitle
: Angle
: Marker
English 1/2
35
A quarter-century ago, which may now
qualify as the good old days of
newspapering, run-of-paper sales
accounted for 80 percent of the
industry's advertising revenues.
: Noise Reduction
: Zoom
45
: Surround
: Repeat
6. Indicates the current title number/total number of
titles, the current chapter number/total number of
chapters, and time lapse of the current title playback/
total duration of the title.
1. Broadcast station
2. Program title (max. 2 lines displayed)
3. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
4. Program guide (max. 6 lines displayed)
5. Channel number
Note
• When the program guide is displayed in more than 7
lines, use [K / L] to scroll.
• “No description provided” is displayed when the
program guide is not provided.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
VCR Information
Title/File Name Information
VCR mode
Title Name Information
1
Title Name
My Title
12:00AM
CH 21
Stereo
2
3
1
File Name Information
File Name
My File
SP
0:00:00
HIFI
1
4
5
6
1. Displays title/file name.
* This is an example screen only for explanation.
Displayed items vary depending on the cassette tape
you inserted.
1. Indicates current video status.
2. Indicates the current time.
3. Indicates a current channel number (or selected
external input channel) and an audio status of the
program.
4. Indicates a recording or playing back mode.
5. Indicates a tape counter.
6. Audio status of the current cassette tape.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Main Menu
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [OK] to display the
menu. These menus provide entries to all main functions
of the unit.
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. Disc Edit:
To set up the DVD setting.
5. CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a video CD, a CD-RW/-R with MP3 files is inserted
into the unit.
Setup
General Setting
Timer Programming
Title List
Disc Edit
CD Playback Mode
General Setting Menu
1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
General Setting
8
1
2
3
4
5
26
37
Playback
Display
Video
Recording
Clock
Channel
Reset All
Parental Lock
Disc Audio
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
To adjust the channel setting of the unit as you prefer.
7. Reset All:
To reset the setting to the factory default.
8.
:DVD
:VCR
Indicates the available mode for the selected function.
Disc Edit / CD Playback Mode
1. Edit Disc Name:
<Disc Edit menu (DVD+RW)>
Allows you to rename the disc.
Disc Edit
1
2. Erase Disc: (DVD+RW/DVD-RW only)
Allows you to erase all contents in the disc and format it.
3. Make Edits Compatible: (DVD+RW only)
Allows you to memorize the editing status on the disc if
you have added or deleted chapters, or made chapters
hidden on this unit, and to effect it when playing back
on the other unit.
Finalize: (DVD+R/DVD-RW/-R only)
Allows you to finalize a disc containing recorded titles.
4. Disc Protect :
Allows you to protect a disc from accidental editing or
recording.
5. Random Play:
Allows you to activate the random playback feature.
6. Program Play: (audio CD/video CD only)
Allows you to activate the program playback feature.
7. PBC (Video CD only):
Allows you to select images or information on the menu
screen by activating PBC (playback control) function.
Edit Disc Name
Erase Disc
Make Edits Compatible
2
3
4
Disc Protect OFF
ON
<Disc Edit menu (DVD-RW)>
Disc Edit
1
2
3
4
Edit Disc Name
Erase Disc
Finalize
Disc Protect OFF
ON
<Disc Edit menu (DVD+R/DVD-R)>
Disc Edit
1
23
34
Edit Disc Name
Finalize
Disc Protect OFF
ON
<CD Playback Mode menu>
CD Playback Mode
15
26
37
Random Play
Program Play
PBC (Video CD only)
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Switching DVD / VCR Mode
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish
to operate.
DVD mode
VCR mode
Press [SOURCE] on the front panel, or press [DVD] on the Press [SOURCE] on the front panel, or press [VCR] on the
remote control.
remote control.
(Verify that the DVD indicator is lit.)
(Verify that the VCR indicator is lit.)
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
j
F
i
C
B
h
g
VCR button
DVD button
DVD indicator
SOURCE button
VCR indicator
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• You cannot switch the mode while in the timer-standby mode.
How to Insert a Disc / Cassette Tape
How to Insert a Disc
How to Insert a Cassette Tape
1) Insert a cassette tape as illustrated below.
1) Press [OPEN/CLOSE A] to open the disc tray.
4
HEAD HI-FI STEREO
Cassette compartment
2) Place the disc on the disc tray with its label side
facing up.
Align the disc to
the disc tray guide.
• Insert from the flap side first with the window side
facing up.
To eject the cassette tape:
Press [STOP/EJECT
C
A] on the front panel or press
3) Press [OPEN/CLOSE A] to close the disc tray.
[OPEN/CLOSE A] on the remote control.
It may take a while to load
the disc.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray, then
remove the disc before turning off the unit.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 20 to display the “Initial Setup”
menu.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select your desired
language, then press [OK].
Initial Setup
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
OSD Language
English
Français
Español
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select the type of
broadcasting signal, then press [OK].
o
3
s
B
OK
p
Initial Setup
TITLE
RETURN
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
j
F
i
B
Antenna
Cable (Analog)
h
g
C
Cable (Analog / Digital)
CHANNEL
The unit will start getting channels available in
your area.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Antenna:
(When using antenna)
REC
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
CH
1
Auto Presetting Now
Press [OK] to activate “Clock Setting”.
Initial Setup
4
5
Clock Setting
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
Proceed to step 5 in “Manual Clock
Setting” on page 30.
• If a PBS (public broadcasting station) is
available in your area, follow “Auto Clock
Setting” on page 29.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Auto Channel Scan
Press [SETUP] and use [K / L] to
select “General Setting”, then press
STANDBY-ON
1
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
“General Setting” menu will appear.
A
ABC
DEF
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
2
3
4
PQRS
TUV
WXYZ
7
8
9
CLEAR
Use [K / L] to select “Auto Channel
Preset”, then press [OK].
SPACE
.
0
DISC MENU
SETUP
o
Use [K / L] to select the type of
broadcasting signal, then press [OK].
s
B
OK
p
TITLE
RETURN
Auto Channel Preset
Antenna
Cable (Analog)
Cable (Analog / Digital)
j
F
i
B
h
g
C
CHANNEL
The unit will start getting channels available in
your area.
--
+
• When aerial antenna is connected, select
“Antenna”.
• When connected to CATV, select “Cable
(Analog)” or “Cable (Analog/Digital)”.
To cancel the auto channel preset during
scanning:
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Press [RETURN] or [SETUP] to cancel.
When scanning is over, press [SETUP]
to exit.
5
To cycle through only the memorized channels, use
[CHANNEL
/
].
To select a channel directly (including the ones not
memorized), use [the Number buttons].
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
• You cannot change the channel when either VCR or
DVD is in any recording mode (basic recording, one-
touch timer recording or timer recording).
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding / Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channel is only available for the analog TV
channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add/delete channels.
1
2
Make sure
Press [SETUP] and use [K / L] to
select “General Setting”, then press
• You perform “Auto Channel Scan” before adding or
deleting the channels.
[OK].
“General Setting” menu will appear.
STANDBY-ON
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
3
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Manual Channel
Preset”, then press [OK].
4
PQRS
TUV
WXYZ
Auto Channel Preset
Manual Channel Preset
TV Audio Select
7
8
9
CLEAR
SPACE
.
0
• If you are adding or deleting analog TV/CATV
DISC MENU
SETUP
channels, go to
to continue.
ANALOG
o
• If you are deleting digital TV/CATV channels, go
to to continue.
DIGITAL
s
B
OK
p
TITLE
RETURN
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Instructions continue on the next page.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
DIGITAL
ANALOG
Select the channel number to add or
delete.
Select the channel number to delete.
• Only the major channel is displayed in “Manual
Channel Preset” menu. (The channel number
displayed in the parenthesis is a virtual channel
number)
• Use [CHANNEL
/
] to cycle through only
5
5
6
the memorized channels.
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
• Use [CHANNEL
the memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
/
] to cycle through only
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K / L] to select “Add” or
“Delete”, then press [OK].
Use [K / L] to select “Delete”, then
press [OK]. Then select the next
channel to delete.
Manual Channel Preset
6
CH
2
• If the setting is complete, press [RETURN] to
Add
Delete
activate “Manual Channel Preset”.
Manual Channel Preset
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
DTV
2
(CH - - - )
Add
Delete
Press [SETUP] to exit.
Your setting will be activated.
7
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Press [SETUP] to exit.
7
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30.
Auto Clock Setting
This unit can set the time and date automatically by
Press [SETUP] and use [K / L] to
select “General Setting”, then press
referring to a PBS station.
Make sure
1
2
3
4
[OK].
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to page 26.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
“General Setting” menu will appear.
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
STANDBY-ON
Use [K / L] to select “Auto Clock
Setting”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select “Auto”, then
press [OK].
1
GHI
4
2
JKL
5
3
MNO
6
Auto Clock Setting
PQRS
TUV
WXYZ
7
8
9
CLEAR
OFF
Auto
Manual
SPACE
.
0
DISC MENU
SETUP
o
Press [SETUP] to exit.
s
B
OK
p
TITLE
RETURN
5
6
Press [STANDBY-ON y] to turn off
j
F
i
B
the unit.
This unit will search for the time only when the
power is off. Leave it off for several minutes to
give this unit time to set the clock.
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Select “Manual” at step 4, then press
[OK].
1
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [OK].
Set Channel No.
2
CH
1
Note
• The clock may set itself automatically after you
connect the antenna/cable signal and plug in the
power cord.
Press [SETUP] and turn off the unit.
• Only the analog PBS channel signal is effective for
auto clock setting.
• The unit receives the clock data at 12:00 a.m. / p.m.
from the PBS channel when the power is off.
3
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
“ON (MAR - NOV)” has been selected as the default.
1
[OK].
“General Setting” menu will appear.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
1
[OK].
2
3
4
“General Setting” menu will appear.
Use [K / L] to select “Clock Setting”,
then press [OK].
Use [K / L] to select “Clock”, then
press [OK].
“Clock” menu will appear.
2
3
4
Use [K / L] to select calendar or time,
then press [OK].
Use [K / L] to select “Daylight Saving
Time”, then press [OK].
Clock Setting
JAN / 01 / 2007 ( MON )
12 : 00 AM
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
then press [OK].
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
Daylight Saving Time
5
ON (MAR - NOV)
ON (APR - OCT)
OFF
ON (MAR - NOV):
Clock Setting
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
JAN / 01 / 2007 ( MON )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press [OK].
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
Press [SETUP] to exit.
Press [SETUP] to exit.
6
5
Note
• Your setting will be canceled if you press [RETURN]
before pressing [OK] at step 5.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2007
up to 2056.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Digital TV Channels>
Switching Analog Mode /
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
e.g.) 2-2 ch:
major channel
minor channel
[0] + [2] or [2] + [•]
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
For 2-digit number
e.g.) 35-16ch:
major channel
minor channel
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
[3] + [5]
[1] + [6]
Note
• When you switch the analog mode to the digital
mode, it may take about 10 seconds until the digital
channel selection is completed. The following screen
is displayed while switching the mode.
DTV 125. 1
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Now Scanning
Note
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
About digital TV broadcasting:
Channel Selection
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
Select channels by using [CHANNEL
Number buttons] found on remote control.
/
] or [the
What is the minor channel?
[CHANNEL
/
]
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
signal network.
Use [CHANNEL
/
] to change the channel.
[the Number buttons]
Press the channel number with [the Number buttons] to
select a channel you want to watch.
<Analog TV Channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
[Air Time]
NTSC (analog mode)
ATSC (digital mode)
18:00
18:30
19:00
19:30
20:00
smallest smallest
CH4-1
e.g.) 2 ch:
[0] + [2], [2] + [•] or
[2] + leave it for 2 seconds.
CH
CH
For 2-digit number
e.g.) 12ch: [1] + [2]
CH4-1 CH4-2 CH4-3
CH4
smallest
CH
CH4-1
CH4-3
smallest
CH
CH4-1 CH4-2
minor channel
major channel
: change automatically
: change manually by using [CHANNEL
/
]
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be
recorded.
Selecting TV Audio
Digital TV
Press [AUDIO] to cycle through
STANDBY-ON
available audio languages.
English 1/2
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
• When you press [AUDIO], selected language
will be displayed on the TV screen.
.
0
DISC MENU
SETUP
• Every time you press [AUDIO], the language
will be switched.
o
e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3
s
B
OK
p
• Available languages differ depending on the
broadcast.
TITLE
RETURN
• The language information display will
automatically disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• Pressing [AUDIO] does not control external device
audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
Press [SETUP] and use [K / L] to
STANDBY-ON
select “General Setting”, then press
1
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
“General Setting” menu will appear.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Channel”, then
press [OK].
“Channel” menu will appear.
2
3
4
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Use [K / L] to select “TV Audio
Select”, then press [OK].
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Stereo” or
“SAP”, then press [OK].
s
B
OK
p
TITLE
RETURN
TV Audio Select
j
F
i
B
Stereo
SAP
h
g
C
Stereo:
CHANNEL
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
Press [SETUP] to exit.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
5
SEARCH
Note on recording analog TV audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “General Setting” menu
beforehand. Refer to the following table to check an
appropriate setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
SAP
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
DTV Closed Caption
Digital TV
Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
STANDBY-ON
1
[OK].
“General Setting” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select “Display”, then
press [OK].
1
GHI
4
2
JKL
5
3
MNO
6
2
PQRS
TUV
WXYZ
Use [K / L] to select “CC Style”, then
press [OK].
7
8
9
SPACE
CLEAR
.
0
3
DISC MENU
SETUP
OSD Language
Screen Saver
FL Dimmer
CC Style
o
s
B
OK
p
V-Chip
TITLE
RETURN
Use [K / L] to select “DTV CC”, then
press [OK].
j
F
i
B
4
5
h
g
C
CC Style
CHANNEL
DTV CC
User Setting
Font Size
Font Style
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Use [K / L] to the desired DTV closed
caption, then press [OK].
DTV CC
OFF
Service1
Service2
Service3
Service4
Service5
Service6
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
Press [SETUP] to exit.
Note
6
• Even if you set “DTV CC” to anything other than
“OFF”, its effect will temporarily be canceled while
recording.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [SETUP] and use [K / L] to
STANDBY-ON
select “General Setting”, then press
1
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
“General Setting” menu will appear.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Display”, then
press [OK].
2
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Use [K / L] to select “CC Style”, then
press [OK].
.
0
DISC MENU
SETUP
3
o
OSD Language
Screen Saver
FL Dimmer
CC Style
s
B
OK
p
TITLE
RETURN
V-Chip
j
F
i
B
Use [K / L] to select “User Setting”,
then press [OK].
h
g
C
4
5
CHANNEL
CC Style
--
+
DTV CC
User Setting
Font Size
Font Style
Edge Type
Font Opacity
Font Color
Back Opacity
Back Color
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Use [K / L] to select “ON”, then press
[OK].
User Setting
ON
OFF
Instructions continue on the next page.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
<Font Color>
Font color of the displayed caption can be
switched as below.
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [OK].
6
Font Color
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
Transparent
White
Black
Red
Green
Blue
• The setting description for each item is shown
below.
Yellow
Magenta
Cyan
<Font Size>
Font size of the displayed caption can be
switched as below.
<Back Opacity>
Background opacity of the displayed caption can
be switched as below.
Font Size
Middle
Large
Small
Back Opacity
Solid
Translucent
Flash
<Font Style>
Font style of the displayed caption can be
switched as below.
<Back Color>
Background color of the displayed caption can
be switched as below.
Font Style
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Back Color
Transparent
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
<Edge Type>
Edge type of the displayed caption can be
switched as below.
Edge Type
None
Raised
Press [SETUP] to exit.
Depressed
Uniform
L.Shadow
R.Shadow
7
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
Font Opacity
Solid
Translucent
Flash
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DVD RECORDING
Before you make a recording, read the following information.
Recordable Discs
Recording Mode
This unit can record to DVD+RW, DVD+R, DVD-RW and
DVD-R.
DVD+R/DVD-R can only be recorded to once. DVD+RW/
DVD-RW can be recorded to and erased many times.
DVD-RW/-R will be recorded in the DVD+VR mode
automatically in this unit.
You can select a recording mode among 6 options, and
the recording time will depend on the recording mode
you select as follows.
Recording Recording
Video/sound
quality
Disc size
8cm Disc
mode
time
18 min
36 min
(good)
HQ (1Hr)
SP (2Hr)
Logo
Attributes
SPP (2.5Hr) 45 min
LP (3Hr)
EP (4Hr)
SLP (6Hr)
HQ (1Hr)
SP (2Hr)
54 min
72 min
8cm/12cm, single-sided,
single layer disc
(poor)
(good)
108 min
60 min
DVD+RW
DVD+R
Approx. max. recording time
(SLP mode):
360 minutes (4.7GB) (for 12cm)
108 minutes (1.4GB) (for 8cm)
120 min
SPP (2.5Hr) 150 min
12cm Disc
LP (3Hr)
EP (4Hr)
SLP (6Hr)
180 min
240 min
360 min
(poor)
DVD-RW
DVD-R
• The recording time is only an estimate. The actual
recording time may differ.
• The audio and video quality gets poorer as the recording
time becomes longer.
• Each time [REC MODE] is pressed, recording mode and
its allowed recording time will be displayed.
• Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition the unit
may not read the disc properly.
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Note
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
• This unit cannot record to CD-RW or CD-R.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on
a personal computer or a DVD or CD recorder may
not be played back if the disc is damaged or dirty or
if there is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
Performance of any other discs are not guaranteed.
• You can play back DVD+RW on most DVD players
without finalizing. However, if you have added or
deleted chapters, or made chapters hidden, you
must perform “Make Edits Compatible” before being
able to see those effects on other units. (Refer to
page 80 for more details.) To play back discs other
than DVD+RW on other DVD players, you will need
to finalize.
Unrecordable Discs
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
• DVD-RW recorded in the mode other than +VR is not
recordable on this unit unless you erase all contents in
the disc (refer to page 79).
• DVD-R recorded in the mode other than +VR is not
recordable on this unit.
• You cannot record copy-protected program using
this unit. (Copy-protected signal is included in DVD-
video or some satellite broadcasts.)
• You cannot record “copy-once only” program on
DVD.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE RECORDING
Make Recording Compatible
Setting for Auto Chapter
You can set a specified time for chapter marks.
Use this feature to make the unfinalized +VR mode discs
recorded on other unit recordable on this unit. When you
make an additional recording on this unit with “Make
Recording Compatible” set to “ON”, the title menu is
automatically converted to our style.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
“General Setting” menu will appear.
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [OK].
3) Use [K / L] to select “Auto Chapter”, then press [OK].
“General Setting” menu will appear.
4) Use [K / L] to select a desired time option, then
press [OK].
2) Use [K / L] to select “Recording”, then press [OK].
“Recording” menu will appear.
Auto Chapter
3) Use [K / L] to select “Make Recording Compatible”,
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
then press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Make Recording Compatible
ON
OFF
5) Press [SETUP] to exit.
ON:
Title list will be replaced when you make
additional recordings to the discs recorded by
other units.
Note
• The interval for auto chapter marks may slightly
differ.
OFF: Prohibiting additional record to the disc that
has a title list created by other units.
• A blank chapter may be created depending on the
remaining time of the disc.
5) Press [SETUP] to exit.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Follow the steps to record TV programs.
Press [DVD] first.
Insert a recordable disc (refer to page
STANDBY-ON
24 on how to insert a disc).
* Make sure the disc is compatible with this unit.
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
(Refer to page 37 for the list of compatible
discs.)
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
It may take a while to load
the disc.
• When inserting a brand-new DVD+RW/DVD-
RW, the unit automatically starts to format.
• If titles have been recorded on the disc, the
title list is displayed. Press [STOP C] to exit the
title list.
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
.
0
DISC MENU
SETUP
o
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 37.
s
B
OK
p
TITLE
RETURN
2
3
j
F
i
B
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
SP(2Hr)
0:58
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Select the appropriate external input
channel by pressing [SOURCE] or
SEARCH
[CHANNEL
Press [DTV/TV] to select analog TV or
digital TV, then use [CHANNEL
/
].
/
]
or [the Number buttons] to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 31.
CH 12
Instructions continue on the next page.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC I] to start recording.
“I” will be displayed for 5 seconds.
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 68.)
4
5
e.g.) DVD+R
I
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart
recording.
Writing to Disc
90%
To set one-touch timer recording (OTR)...
1
SP(2Hr)
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)
One-touch timer recording will start.
I
0:30
• Press [STOP C] to exit the title list.
0:30
(normal recording)
1:00
6:00
5:30
To change the recording length during the one-
touch timer recording:
Press [REC I] repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
Note
• When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 32-33 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using [REC I] or [STOP C] on the remote control.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby
mode to use the unit continuously.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
You can program the unit to record up to 12 programs
Guide to Timer Programming Display
within a month in advance. Daily or weekly program
recordings are also available.
3
1
2
Timer Programming
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)
MON JAN/01 11:00AM
Date
Start
End
CH
JAN/02
12:00AM 1:00AM DTV125. 1
New Program
6
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
1/1
A
ABC
DEF
4
5
1
GHI
4
2
JKL
5
3
MNO
6
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
PQRS
TUV
WXYZ
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
6 Recording media (“ ” (DVD) or “ ” (VCR))
o
s
B
OK
p
Press [TIMER].
TITLE
RETURN
1
j
F
i
B
Use [K / L] to select “New Program”,
then press [OK].
h
g
C
CHANNEL
--
+
2
Timer Programming
REC MODE VCR
DVD
TIMER
AUDIO
MON JAN/01 11:00AM
Date
Start
End
CH
REC
New Program
I
TIMER
SET
CM SKIP D.DUBBING
RAPID PLAY
• If there are 6 or more programs, use
[H / G] to change pages.
Note
Use [K / L] to enter the date, then
press [B].
• If you have not set the clock yet:
Entry screen for the clock setting will appear instead
of the timer programming list at step 1. Continue
with the step 4 in “Manual Clock Setting” on page 30
before setting a timer programming.
• Use [s / B] to move the cursor to the left and the
right in the entry screen for the timer programming.
• If a basic recording or one-touch timer recording is in
progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is
about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes
before the programmed starting time, and the
recording in progress (for VCR) will be canceled
UNLESS their recording channels are the same. If their
recording channels are the same, the timer recording
will start without canceling the recording currently in
progress. In this case, the recording of the same
channel will be made on both DVD and VCR.
3
Date
JAN/02
CH
Start
- - : - -
REC To
DVD
End
- - : - -
Mode
SP
DTV125. 1
SP
2 : 00
JAN/01
Daily
When pressing [L] at
the current date, the
date will change as
follows.
p
p
p
p
MON-SAT
MON-FRI
SAT
e.g.) January 1st
p
p
FRI
p
p
SUN
• Cancel the timer-standby mode by pressing
[TIMER SET] before operation for either DVD or VCR.
When finished operating, press [TIMER SET] to
resume the timer-standby mode.
JAN/31
• In the timer-standby mode, you can turn on the
power and use the component (VCR or DVD) which is
not currently timer-programmed.
Instructions continue on the next page.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
Use [K / L] to select a recording
mode.
4
5
time, then press [B].
7
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
- - : - -
Mode
SP
DTV125. 1
SP
1 : 00
DTV125. 1
SP
2 : 00
Refer to “Recording Mode” on page 37.
• When recording to DVD, you can check the
remaining recordable space of the disc when
you select the recording mode.
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (E1 / E2), then press
[B].
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
DTV125. 1
SP
1 : 00
e.g.) external input mode
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
E1
SP
1 : 00
To record from external input (e.g., cable/
satellite box), select E1 or E2.
Use [K / L] or [the Number buttons] to select
the channel number to record, then press
[B].
automatically to complete recording the program.
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
DTV125. 1
Auto
Auto
1 : 00
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 43
for more details.
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
e.g.) analog mode
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
Press [OK] when all items are
entered.
10
SP
1 : 00
Your program setting is now stored.
8
e.g.) digital mode
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
DTV125. 1
SP
1 : 00
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 43.
Use [K / L] to select the recording
media (“DVD” or “VCR”), then press
[B].
6
Press [TIMER SET] to set a timer
programming.
e.g.) recording to DVD
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
SP
9
will appear on the front panel display.
DTV125. 1
SP
1 : 00
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
Digital TV
For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
minor channels
For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed.
[K / L] does not skip the non-existed minor channels.
To stop the timer recording in progress
If the timer program did not complete correctly,
Press [STOP C] / [STOP/EJECT
C
A] on the front panel
the error number appears in the timer pro-
gramming list.
of the unit to stop the timer recording in progress.
[STOP C] on the remote control is not effective.
Timer Programming
Checking, canceling, or correcting the timer
programming information
TUE JAN/02 11:00AM
Date
E41 JAN/02
Start
End
CH
12:00AM 1:00AM DTV125. 1
New Program
1) Press [TIMER SET].
2) Press [TIMER].
1/1
3) Check the information.
Timer Programming
Each error number means:
JAN/ 2/07 12:00 AM 125.1 SP
SP (1:00)
Date
JAN/02
MON JAN/01 11:00AM
E1-22 Recording error other E41
E37-39 than below
Power failed
Start
End CH
12:00AM 1:00AM DTV125. 1
New Program
E24
Unrecordable disc
E42
E43
E44
E45
E46
No disc when
recording
4-A) To delete the timer program:
E25-26 Copy prohibited
program
Already 49 titles
recorded
1 Use [K / L] to select the program you want to
delete, then press [OK].
2 Use [K / L] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [K / L] to select “Yes”, then press [OK].
E29
Disc protected
Already 254 chapters
recorded
E30
Disc full
Copy prohibited
program
4-B) To correct the timer program:
E35
E36
PCA full *1
It is impossible to
record additionally
on a disc recorded
by other units
1 Use [K / L] to select the program you want to
correct, then press [OK].
Already finalized
video format disc
2 Use [K / L] to select “Program Change”, then
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
when setting “
press [OK].
Make Recording
Compatible” to “OFF”.
3 Correct the timer program by using
[K / L / { / B], then press [OK].
5) Press [TIMER] to exit.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
6) Press [TIMER SET] to return to the timer standby
mode.
Note
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
• Press [TIMER] to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
*1 PCA is a disc's space reserved for recording test.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• If both DVD and VCR are timer programmed, you cannot
use any functions for either unit during timer standby or
timer recording. If you want to use functions other than
recording under such condition, cancel timer recording
by pressing [TIMER SET] during timer standby or stop
recording by pressing [STOP C] / [STOP/EJECT
the front panel of the unit during timer recording.
• To cancel the timer standby mode, press [TIMER SET].
• If a disc is not inserted, "DVD" on the front panel display
flashes and timer recording cannot be performed. In
C
A] on
some cases,
will appear momentarily around the start
time as the unit attempts to record. Please insert a
recordable disc.
• If a cassette tape with a erase-protection tab is not in the • When the starting and the ending time are the same, the
cassette compartment or there is no cassette tape in the
cassette compartment, “VCR” on the front panel display
flashes and timer recording cannot be performed. Please
insert a recordable cassette tape.
• If a cassette tape ends during the timer recording, the
unit will automatically stop, eject the cassette tape, and
turn itself off. To continue recording, insert a recordable
tape.
length of the recording will be set for 24 hours. When
the disc or cassette tape becomes full during the
recording, the unit turns itself off.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you press [TIMER SET] at step 9 on page 42.
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• The timer recording cannot be performed in DVD and
VCR at the same time. If you set 2 programmings with
the same channel and time in both devices, the program
which is set first will have the priority.
• When all the timer recordings are completed,
flashes.
Press [TIMER SET] to release the unit from the timer
standby mode.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off
(when recording to DVD only).
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minute or more, this
program will be displayed with error number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Overwriting from the Beginning of
the Title
Overwriting in the Middle of the Title
You can overwrite the existing title from the selected
position.
You can overwrite the existing title from the beginning.
1) Press [STANDBY-ON y].
Make sure that the TV input is set on the unit.
1) Follow the steps 1, 2 and 4 on the left.
2) Use [K / L] to select “Play”, then press [OK].
2) Load the disc that includes a title to be overwritten.
Playback will start.
It takes a while to display
the title list.
3) Press [PAUSE F] at the point from which you want
to start overwriting.
Title list will appear.
If the title list does not appear, press [TITLE].
4) Press [REC I].
3) Press [REC MODE] to select a recording mode.
“F I”, display menu, channel, and the time lapse will
be displayed as illustrated on the left.
Refer to “Recording Mode” on page 37.
4) Use [K / L] to select a title to be overwritten, then
press [OK].
5) Select the channel you want to record.
(Refer to page 31 on how to select a channel.)
1
SP (2Hr)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
6) Press [REC I] again.
Overwriting recording starts.
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
7) Press [STOP C] to stop recording.
EMPTY TITLE
1:37:52 SP(2Hr)
This operation may take a
while to be completed.
5) Use [K / L] to select “Overwrite”, then press [OK].
Note
1
SP (2Hr)
Play
Edit
Overwrite
• Recording mode of the overwriting title is the same
as that of the original (overwritten) title when
overwriting in the middle of the title.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
6) Select the channel you want to record.
(Refer to page 31 on how to select a channel.)
• Title name will not be overwritten.
e.g.) DVD+RW
selected title number
to be overwritten
1
1
0:01:00
+RW
CH 12
SP(2Hr)
2:00
F
I
7) Press [REC I].
Overwriting recording starts.
The elapsed-time counter starts running.
8) Press [STOP C] to stop recording.
Title name is also overwritten.
This operation may take a
while to be completed.
Note
• The remaining recording time is displayed on the
bottom right corner of the TV screen during
overwriting.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
OVERWRITING UNNECESSARY TITLE
Hints for Overwriting
When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that
following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion
please check if there is no important title after the overwriting point.
When overwriting title is shorter than the existing title:
(overwriting from the beginning of the title)
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B
title name : A
When overwriting title is longer than the existing title:
(overwriting from the beginning of the title)
overwrite
recording : A
after
overwriting
existing title : B
title name : A
overwrite
recording : A
30 - 180 seconds will be cut off.
after
overwriting
existing title : B
existing title : C
title name : A
title name : C
When overwriting in the middle of the title:
overwrite
30 - 180 seconds will be cut off.
recording : A
after
overwriting
existing title : B
title name : B*
title name : B
Overwritten section and the rest of the sections will
have the same title name as the original existing
title (B).
*
Note
• When a title name is overwritten, its thumbnail is also overwritten.
• “Auto Chapter” interval time is reset at the overwriting start point.
• A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either E2 (Front) or E1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front).
Use S-video or the RCA audio/video cables for this connection.
or
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
R
L
R
L
external device
(camcorder, VCR etc.)
RCA
RCA
RCA
S-video
cable
RCA
S-video
cable
video
cable
or
video
cable
audio
cable
audio cable
or
DVD/VCR
IN --- AUDIO---OUT
S-VIDEO
or
IN
IN ---VIDEO---OUT
E2
E1
to E2 IN
to E1 IN
OUT
IN
DVD/VCR
DI
AUDIO
S-VIDEO IN ---AUDIO---OUT
L
L
ANTENNA
R
R
IN
COAXIAL
IN ---VIDEO---OUT
R
front of this unit
rear of this unit
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
.@/:
ABC
DEF
Use [K / L] to select “Video Input”,
then press [OK].
1
GHI
4
2
JKL
5
3
MNO
6
3
4
PQRS
TUV
WXYZ
7
8
9
Use [K / L] to select desired external
input, then press [OK].
SPACE
CLEAR
.
0
DISC MENU
SETUP
Video Input
o
E1 (Rear)
E2 (Front)
s
B
OK
p
TITLE
RETURN
Use [K / L] to select the input jack
type to connect, then press [OK].
j
F
i
B
If you want to use VIDEO IN jack, select “Video
In”.
5
h
g
C
If you want to use S-VIDEO IN jack, select
“S-Video In”.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
E1 (Rear)
Video In
S-Video In
1
2
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Video”, then
press [OK].
Submenu will appear.
Press [SETUP] to exit.
6
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 47.
Recording to a DVD
Press [DVD].
Insert a recordable disc (refer to page
24 on how to insert a disc).
1
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
It takes a while to load the disc.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Recording to a Cassette Tape
Press [VCR].
PQRS
TUV
WXYZ
Insert the cassette tape with an
7
8
9
erase-protection tab intact.
SPACE
CLEAR
.
0
Select the appropriate external input
channel (E1 or E2) by pressing
DISC MENU
SETUP
o
2
3
[SOURCE] or [CHANNEL
/
].
s
B
OK
p
• If the external device is connected to the rear
of this unit, select E1.
TITLE
RETURN
• If the external device is connected to the front
of this unit, select E2.
• You can also select E1 or E2 channel by using [the
Number buttons].
e.g.) For E1, press [0], [0], [1].
j
F
i
B
h
g
C
CHANNEL
--
+
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 37 for DVD,
or “Recording” on page 90 for VCR.
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Press [RECORD I] on the unit to start
recording.
SEARCH
4
Start playback on the external device
to record from.
5
6 4
For disc:
Press [STOP C] on the unit to stop
6 recording.
For cassette tape:
Press [STOP/EJECT
to stop recording.
This operation may take a
while to be completed.
C
A] on the unit
6 4
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BI-DIRECTIONAL DUBBING
You can copy contents in a DVD to a cassette tape, or do
Preparing for dubbing (cassette tape to DVD):
• Insert a cassette tape to be dubbed.
• Insert a recordable DVD.
• Make sure there is enough space on the DVD.
Preparing for dubbing (DVD to cassette tape):
• Insert a disc to be dubbed.
vice versa. This function is available only when the contents
are not copy-protected. (Before you start, refer to page 37
for the list of compatible discs.)
STANDBY-ON
• Insert a cassette tape with an erase-protection tab in
tact.
• Make sure there is enough recordable length on the
tape.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Press [SETUP] and use [K / L] to
select “General Setting”, then press
PQRS
TUV
WXYZ
1
[OK].
7
8
9
SPACE
CLEAR
“General Setting” menu will appear.
.
0
DISC MENU
SETUP
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
o
2
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Dubbing
Mode”, then press [OK].
Selection menu will appear.
j
F
i
B
3
h
g
C
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note for dubbing
• Dubbing direction setting in “Dubbing Mode” menu
is always reset to “VCR DVD” whenever you turn off
the power.
• You cannot change the output mode during VCR to
DVD or DVD to VCR duplication.
Note for recording to a tape:
Make sure
- the cassette tape’s erase-protection tab is intact.
- the cassette tape is long enough.
Note for recording to a disc:
Make sure
- the disc is compatible (refer to page 37).
Instructions continue on the next page.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
BI-DIRECTIONAL DUBBING
VCR to DVD
DVD to VCR
Use [K / L] to select “VCR DVD”,
then press [OK].
Use [K / L] to select “DVD VCR”,
then press [OK].
4
4
Dubbing Mode
Dubbing Mode
VCR
DVD
DVD
VCR
VCR
DVD
DVD
VCR
Press [SETUP] to exit.
Press [SETUP] to exit.
Press [VCR], then press [PLAY B] to
find the point where you wish to start
dubbing.
Press [DVD], then press [PLAY B] to
find the point where you wish to start
dubbing.
5
6
7
8
9
5
6
7
8
9
Press [PAUSE F] when you come to
the desired start point.
Press [PAUSE F] when you come to
the desired start point.
Press [DVD], then press [REC MODE]
repeatedly to select the desired
recording mode.
Press [VCR], then press [REC MODE]
repeatedly to select the desired
recording mode.
Rewind or fast forward the tape to the point
where you want to start recording.
Press [D.DUBBING].
VCR to DVD duplication will start.
Press [D.DUBBING].
DVD to VCR duplication will start.
Press [STOP C] to stop the dubbing.
Press [STOP C] to stop the dubbing.
Note for VCR to DVD duplication
• After starting VCR to DVD duplication, the picture
may be distorted because of the auto tracking
function. This is not a malfunction. Be advised to play
back the tape until the picture is stabilized, then set
the starting point which you wish to start recording,
and start VCR to DVD duplication.
• This unit will automatically stop the duplication if
playback with no image is detected for more than 3
minutes during VCR to DVD duplication.
• Playback sound mode of the dubbed contents is
determined by the playback sound mode of the VCR
at the point of dubbing.
• This function is available for audio CD, but not with
MP3 files.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “Disc Edit” menu.
Press [SETUP].
STANDBY-ON
1
2
3
Use [K / L] to select “Disc Edit”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
Disc Edit
.
0
Edit Disc Name
Erase Disc
DISC MENU
SETUP
Make Edits Compatible
o
Disc Protect OFF
ON
s
B
OK
p
TITLE
RETURN
j
F
i
B
h
g
C
Use [K / L] to select “Yes”, then press
[OK].
CHANNEL
--
+
4
Protect this disc?
REC MODE VCR
DVD
TIMER
AUDIO
Yes
No
REC
I
TIMER
A disc will be protected.
CM SKIP D.DUBBING SET RAPID PLAY
This operation may take a
while to be completed.
SEARCH
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON” at step 3.
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect ON
OFF
To release the protect for the disc, select “Yes” at step 4.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize DVD+R, DVD-RW or DVD-R to
play them back on other DVD players.
1
Finalizing may take several minutes up to an hour.
A shorter recording period on the disc will require a
Use [K / L] to select “Disc Edit”, then
press [OK].
“Disc Edit” menu will appear.
longer time period for finalization. Do not unplug the
power cord during finalization.
2
STANDBY-ON
Use [K / L] to select “Finalize”, then
press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
3
4
A
ABC
DEF
Use [K / L] to select “Yes”, then press
[OK].
e.g.) DVD+R, DVD-R
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Finalize disc?
SPACE
CLEAR
Yes
No
.
0
DISC MENU
SETUP
Finalizing will start.
o
s
B
OK
p
Finalizing
90%
TITLE
RETURN
To cancel finalizing...
j
F
i
B
(DVD-RW only)
h
g
C
• To cancel finalizing at step 4, press [STOP C], select
“Yes” with [K / L], then press [OK]. Finalizing is
canceled and the unit will be in stop mode.
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
Do you want to cancel ?
I
Yes
No
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Finalizing
5%
• If
appears when pressing [STOP C], you cannot
cancel finalizing because the finalizing has been in
certain progress.
Note
• When selecting “No” and press [OK] or [RETURN] ,
finalizing will be continued.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
• You cannot cancel finalizing the DVD+R/DVD-R once
it has started.
• There is no need to finalize DVD+RW.
• When you insert a DVD-RW finalized with this unit,
“Undo Finalize” will appear instead of “Finalize”.
This operation may take a
while to be completed.
Disc Edit
Edit Disc Name
Erase Disc
Undo Finalize
Disc Protect ON
OFF
Finalizing is completed.
To release the finalizing for the disc, select “Undo
Finalize” at step 3.
* DO NOT power off during finalization, this will result
in malfunction.
5
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS ON OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K / L] to
select “General Setting”, then press
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
1
[OK].
“General Setting” menu will appear.
Use [K / L] to select “Recording”,
then press [OK].
“Recording” menu will appear.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
2
3
4
A
ABC
DEF
Use [K / L] to select “Auto Finalize”,
then press [OK].
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
7
8
9
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press [OK].
SPACE
CLEAR
.
0
Auto Finalize
DISC MENU
SETUP
o
Disc Full
End of Timer Rec
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “ON”, then press
[OK].
j
F
i
B
e.g.) “Disc Full”
5
h
g
C
Disc Full
CHANNEL
ON
OFF
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Your setting will be activated.
REC
Press [SETUP] to exit.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
6
SEARCH
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Before you play back DVD, read the following information.
Playable Discs and Files
Unplayable Discs
This unit is compatible to play back the following discs.
To play back a DVD, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos will play back on the unit. Other disc
types are not guaranteed to play back.
The following discs will not play back on this unit.
• CD-ROM
• DVD-RAM
• DVD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD)
• DVD-audio
• Unfinalized disc
• DVD contains MP3 and DVD or CD contains Windows
Media™ Audio / JPEG / DivX® files
Playable discs
Logos
• DVD-R or DVD-RW recorded in VR mode or non
compatible recording format
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
DVD-video
DVD+RW
Color Systems
DVD+R
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
DVD-RW
(Finalized video mode discs only)
DVD-R
(Finalized video mode discs only)
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.
CD-DA (audio CD)
video CD
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
CD-RW
CD-R
Playable files
Media
CD-DA
CD-RW/-R
MP3
is a trademark of DVD Format/Logo Licensing Corporation.
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
PBC (playback control) for Video CD
Hint for DVD Playback
The contents of DVD are generally divided into titles.
Titles may be further subdivided into chapters.
You can select images or information on the menu
screen by activating the PBC (playback control) function
of the video CD.
This unit conforms to ver.1.1 and ver. 2.0 of video CD
standard with PBC function.
Ver.1.1 (without PBC function): You can enjoy playback
picture as well as music CD.
DVD-video
title 1
title 2
chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
Ver.2.0 (with PBC function): While using a video CD with
PBC function, “PBC” appears on the TV screen.
audio CD, video CD
Note
track 1
track 2
track 3
track 4
track 5
file 5
• PBC setting turns to “ON” when loading video CD
with PBC function, thus, even after setting PBC to
“OFF” and ejecting the video CD then reloading the
video CD, this setting turns to “ON” automatically.
MP3
file 3
• Some operations cannot be performed while PBC
function is on. Cancel PBC function temporarily to
perform those operations by following the
instruction below.
folder 1
file 1
folder 2
file 4
file 2
1) Press [SETUP].
2) Use [K / L] to select “CD Playback Mode”, then
press [OK].
“CD Playback Mode” menu will appear.
3) Use [K / L] to select “PBC (Video CD only)”, then
press [OK].
4) Use [K / L] to select “ON” or “OFF”, then press [OK].
Your setting will be activated.
You can play back interactive software using menu
screens. Refer to instructions in the video CD.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
Press [DVD] first.
Insert a playable disc (refer to page
24 on how to insert a disc).
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Align the disc to
the disc tray guide.
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
* Make sure the disc is compatible with this unit.
(Refer to page 54 for the list of compatible discs.)
7
8
9
SPACE
CLEAR
.
It may take a while to load
the disc.
0
DISC MENU
SETUP
o
Press [PLAY B] to start playback.
s
B
OK
If you are playing back a DVD-video or video CD
with PBC function, a menu may appear.
TITLE
RETURN
p
B
2
3
Refer to “Using the Title / Disc Menu” on page
59.
j
F
i
h
g
C
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 60.
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• Some discs may start playback automatically.
• You can select images or information on the menu
screen by activating PBC (playback control) function
(page 55).
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
If you want to see disc information, press [{ ] when the
first page of the title list is displayed or press [ K ] when
the first title is selected but not when “Play”, “Edit” or
“Overwrite” is highlighted.
.@/:
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
e.g.) DVD+RW
PQRS
TUV
WXYZ
7
8
9
CLEAR
No Disc Name
SPACE
.
0
Disc
DVD+RW
3
Total Titles
DISC MENU
SETUP
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
o
Needed
s
B
OK
p
TITLE
RETURN
e.g.) DVD+R
j
F
i
B
No Disc Name
h
g
C
CHANNEL
Disc
DVD+R
5
Total Titles
Disc Space Used
Disc Protect
Finalize
--
+
1:30:48
OFF
REC MODE VCR
DVD
TIMER
Finalized
Press [DVD] first.
1. Disc name
(Default “No Disc Name”)
2. Disc type
(DVD+RW/DVD+R/ DVD-RW/DVD-R)
3. Total number of title
(include “EMPTY TITLE”)
4. Total time of recorded disc space
5. Status of disc protection
(“ON” is protected disc.)
Insert a playable disc (refer to page
24 on how to insert a disc).
* Make sure the disc is compatible with this unit.
(Refer to page 54 for the list of compatible discs.)
1
2
It may take a while to load
the disc.
• Title list will appear automatically.
• To exit the title list, press [STOP C].
• To resume the title list, press [TITLE].
6. Making edits compatible/finalize
• When DVD+RW is inserted:
If the disc needs to be set “Make Edits Compatible”,
“Needed” is displayed. Otherwise, “Not Needed” is
displayed. (Refer to page 80.)
• When DVD+R, DVD-RW or DVD-R is inserted:
If “Finalize” is done, “Finalized” is displayed.
Otherwise, “Unfinalized” is displayed.
Use [K / L] to select a desired title,
then press [OK].
1
SP (2Hr)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
Use [K / L] to select “Play”, then
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
press [OK].
3
3
EMPTY TITLE
1:37:52 SP(2Hr)
1
SP (2Hr)
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
• For Video CD, when “PBC (Video CD only)” in
“CD playback Mode” menu is set to “ON”, the
video CD main menu will appear when
inserting a disc. In such case, select a numbered
menu with [the Number buttons].
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
• Press [B] to display the next page, and press
[{] to display the previous page.
Playback will start.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 60.
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [OK] at step 2.
4
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3 Files
Press [DVD] first.
Insert a playable disc (refer to page
24 on how to insert a disc).
STANDBY-ON
* Make sure the disc is compatible with this unit.
(Refer to page 54 for the list of compatible discs.)
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
It may take a while to load
the disc.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
When an audio CD is inserted, track list will
appear.
When a CD-RW/-R with MP3 files is inserted, file
list will appear.
• To exit the track/file list, press [STOP C].
• To resume the track/file list, press [TITLE].
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
.
0
DISC MENU
SETUP
o
Use [K / L] to select a desired folder
or track/file, then press [OK].
e.g.) File list
s
B
OK
p
TITLE
RETURN
File List
j
F
i
DISC NAME
B
A
B
h
g
C
1
2
3
4
5
6
MP3 file 1
MP3 file 2
MP3 file 3
MP3 file 4
MP3 file 5
MP3 file 6
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
1/ 2
REC
I
When selecting track/file:
Playback will start.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
When selecting the folder (Not available for audio CD):
SEARCH
The files in the folder will appear.
Use [K / L] to select the file or folder you want to play
back, then press [OK].
• Press [PLAY B], [OK] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN] to move back to the previous
hierarchy.
Hints for audio CD tracks and MP3 files:
• Folders are shown by
.
• Audio CD tracks are shown by
.
3
• MP3 files are shown by
.
• The system can recognize up to 255 folders, up to 99
tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “...”. Unrecognizable characters will
be replaced with asterisks.
• If there are no files in the folder, “No Files” will be displayed.
It is recommended that files to be played back in this
unit are recorded under the following specifications:
<MP3>
Note
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps
• Files whose extension is other than “.mp3(MP3)” will
not be listed.
• Some unplayable folders or files may be listed due to
the recording status.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Using the Title / Disc Menu
Pause
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
DVD or video CD with PBC function may contain a title
list, which describes the contents of the disc, or a disc
menu, which guides you through the available functions
in the disc.
Press [DVD] first.
1)Insert a playable disc (refer to page 24 on how to
insert a disc).
* Make sure the disc is compatible with this unit. (Refer
to page 54 for the list of compatible discs.)
F
It may take a while to load the disc.
2)Press [PLAY B] to return to the normal playback.
2)Press [TITLE] or [DISC MENU] to call up the title list
or disc menu.
Note
• On DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 85.)
3)Use [K / L / { / B] to make a selection, and then
press [OK] to enable your selection.
4)Press [STOP C] to exit.
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
• [TITLE] or [DISC MENU] will not always be active
with all DVD.
• For video CD, when “PBC (Video CD only)” in “CD
Playback Mode” menu is “ON”, the video CD main
menu will appear when inserting a disc.
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Skipping TV Commercials During
Resume Playback
Playback
You can play back from where you stopped playing back
the disc last.
1)During playback, press [STOP C].
The resume message will appear.
You can skip TV commercials to enjoy the recorded
programs without interrupting.
During playback, press [CM SKIP].
Resume ON
Normal playback will start at 30 seconds ahead from the
point you press [CM SKIP].
Every time you press [CM SKIP], the searching point will
be extended by 30 seconds ahead.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
You can press [CM SKIP] up to 6 times (180 seconds).
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
e.g.) Press [CM SKIP] once.
CM Skip 30 sec.
Note
(forwarding 30 seconds)
• For MP3 files, playback will resume from the
beginning of the file at which playback was stopped.
• Some video CD with the PBC function resume
playback from the beginning of the track.
B
Playback will return to the normal playback.
Fast Forward / Fast Reverse Playback
Rapid Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
1)During playback, press [D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD) or files (for MP3 files) is not possible.
g
h
g
h
g
h
g
h
g
h
g
h
normal
speed
1)During playback, press [RAPID PLAY].
40x
20x
5x
2x
20x
40x
playback
Press [RAPID PLAY] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B
:
For video CD, approximate forward/reverse speeds are
2x, 8x, 16x.
For audio CD, MP3 files, approximate speed is fixed at
8x with sound (indicated with
Press [RAPID PLAY] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B
:
/
).
2)Press [PLAY B] to return to the normal playback.
Press [RAPID PLAY] 3 times to play back in
normal speed.
No effects.
B :
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2)Press [PLAY B] to continue the normal playback.
2x:
Note
20x:
40x:
• Audio (language) setting cannot be changed while
using this mode.
reverse (approx. speed)
5x:
20x:
40x:
• This feature may not work at some point in a disc.
• Audio is PCM during rapid playback mode except
when using digital audio connection.
• When using digital audio connection (COAXIAL), the
LPCM sound (2 channel) will be output.
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Step by Step Playback
Zoom
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
1)During playback, press [DISPLAY].
2)Press [G] repeatedly.
Playback will advance one frame (or step) at a time
when you press [G] with the sound muted.
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
To play back step by step backward:
Press [H] repeatedly.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [H] / [G] to reverse/ advance
continuously.
3)Press [PLAY B] to continue the normal playback.
3)Use [K / L] to select a desired zoom factor to zoom,
then press [OK].
Note
• Only step by step forward playback is available for
playing back video CD.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
× 1.2
× 1.5
× 2.0
Slow Forward / Slow Reverse Playback
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
1)During playback, press [PAUSE F]. Then press
[D] or [E].
Every time you press [D] or [E], approximate speed
will be changed as follows. (The sound will remain
muted.)
Zoom area will be displayed.
4)Use [K / L / { / B] to select a desired zoom
position, then press [OK].
g
h
g
h
g
h
g
h
g
h
g
h
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
To return to the normal playback, press [PLAY B].
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
1/16x:
1/8x:
1/3x:
Zoom playback will start.
reverse (approx. speed)
Note
1/16x:
1/8x:
1/4x:
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [DISPLAY] again at
step 1.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [OK].
• Only slow forward is available when playing back
video CD.
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Marker Setting
Repeat Playback
Available repeat function may vary depending the discs.
1)During playback press [DISPLAY].
2)Use [{ / B] to select
, then press [OK] within 1
This feature allows you to assign a specific point on a disc
to be called back later.
second or wait for 1 second to display the selection
menu.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK] within 1
3)Use [K / L] to select a desired repeat type, then
second or wait for 1 second to display the marker
list.
press [OK].
e.g.) DVD-video
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Title
Chapter
A – B
e.g.) audio CD, video CD
1/
5
0:00:15 / 0:05:00
CD
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
OFF
Track
All
A – B
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) MP3 files
1
2
3
4
5
6
1/
5
0:00:15
MP3
OFF
Track
All
Group
The selected repeat playback will start.
1/
5
1/
5
0:01:00 / 1:23:45
The title (track) number and the time will be displayed.
DVD
Repeat
Title
4)To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Title:
The current title will be played back repeatedly.
Chapter:
Note
The current chapter will be played back repeatedly.
• To clear a marker, select the marker number to be
All:
cleared, then press [CLEAR].
• All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning off the power
– Record on a recordable disc
• You can mark up to 6 points.
• Marker setting is not available when you play back
the video CD with PBC function.
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
Note
• Point B for the repeat A-B playback should be set
within the same title or track as point A.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
• You cannot select “Group” during the random
playback.
• Repeat playback is not available when you play back
the video CD with PBC function.
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Random Playback
Program Playback
You can play back a disc randomly instead of playing
back in the original order.
You can program the disc to play back in your desired
order.
1)Press [SETUP].
1)Press [SETUP].
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
3)Use [K / L] to select “Random Play”, then press
[OK].
2)Use [K / L] to select “CD Playback Mode”, then press
[OK].
“CD Playback Mode” menu will appear.
Random playback will start.
3)Use [K / L] to select “Program Play”, then press
[OK].
Note
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the TV
screen.
4)Use [K / L] to select a desired track, then press [OK]
or [B].
CD Playback Mode
Program Play
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
random playback.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
CD Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:31:07
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
• For video CD with PBC function, the PBC setting will
be switched to off automatically when you start
program playback.
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title / Chapter Search
Track Search
Using [H] / [G]
Using [H] / [G]
1)During playback, press [G] to skip the current
track/file and move to the next.
1)During playback, press [G] to skip the current
title or chapter and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [H].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
chapter, press [H].
Press it repeatedly to go to the previous title or
chapter. The title or chapter will move backward one
at a time.
Using [DISPLAY]
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
e.g.) audio CD
, then press [OK].
Using [DISPLAY]
1)During playback, press [DISPLAY].
1/
5
0:00:15 / 0:05:00
CD
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) MP3 files
1/
5
0:00:15
MP3
The number next to
3)Title:
will be highlighted.
The number next to
will be highlighted.
Use [K / L] or [the Number buttons] to enter a
3)Use [K / L] or [the Number buttons] to enter a
desired track/file number to search, then press
[OK].
desired title number to search, then press [OK].
Title search will start.
Chapter:
After the search, playback will start automatically.
Press [B] to move to the number next to
chapter.
for
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press [OK].
Note
After the search, playback will start automatically.
• During CD playback you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
• Track search is not available when you play back the
video CD with PBC function.
Note
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
total number
of titles
total time
of the title
total number
of chapters
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Time Search
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
e.g.) audio CD
1/
5
0:00:15 / 0:05:00
CD
The number next to
will be highlighted.
To move to the number next to
, press [B].
When time search is not available,
counter are not displayed.
and time
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [OK].
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or
title.
• Time search is not available when you play back the
video CD with PBC function.
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in 1 or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages anytime during
playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch them during playback.
When playing back video CD, audio CD you can switch
“L/R”(stereo), “L”(left) or “R”(right).
1)During playback, press [DISPLAY].
1)During playback press [DISPLAY], then proceed to
step 2), or press [AUDIO] then proceed to step 3).
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [OK].
For DVD-video
• Audio soundtrack will switch.
3)Use [K / L] to select a desired subtitle language,
then press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1.Dolby Digital 5.1ch English
2.Dolby Digital 2ch English
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
1.English
• If the title contains both main and sub audio, you can
further select “L” (main), “R” (sub), or “L/R” (mixed of
main and sub).
For audio CD, video CD
• Audio channel will switch.
e.g.) audio CD
Subtitle will be displayed in the selected language.
When selecting “OFF”, subtitle will disappear.
Note
1/
5
0:00:15 / 0:05:00
• Some discs will only allow you to change the subtitle
from the disc menu. Press [TITLE] or [DISC MENU] to
display the disc menu.
CD
1. L/R
2. L
3. R
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 97.
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [TITLE] or
[DISC MENU] to display the disc menu.
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SELECTING THE FORMAT OF AUDIO AND VIDEO
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from 2 or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK].
e.g.) DVD-video
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
Angle icon appears when a switching camera angle is
available.
then press [OK].
e.g.) DVD-video
Angle will switch each time you press [OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Note
• Angle icon does not appear on the TV screen in a
case you set “Angle Icon” to “OFF” in “Playback”
menu. Refer to page 85.
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
Reducing Block Noise
Note
• Select “OFF” in a case sound is distorted.
• The setting will be kept even when the unit is turned
off.
This function reduces noise in the playback picture.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [OK] within 1
second or wait for 1 second to display the selection
menu.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option, then press
[OK].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
OFF
: When playing back titles with a few noises
such as DVD-video.
Type 1 : For the titles recorded in long time mode
such as EP or SLP mode.
Type 2 : Same as type 1, only more effective.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON DISC EDITING
Guide to a Title List
Editing Discs
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
You can edit discs for the following items. Be sure that
once you edit titles, they will not remain as original.
• Deleting Titles (Refer to page 69.)
• Putting Names on Titles (Refer to page 70.)
• Setting Chapter Marks (Refer to page 71.)
• Clearing Chapter Marks (Refer to pages 72-73.)
• Hiding Chapters (Refer to page 74.)
Press [DVD], then press [TITLE].
1
1
SP (2Hr)
• Setting Pictures for Thumbnails (Refer to page 75.)
• Dividing a Title (DVD+RW/DVD-RW only)
(Refer to page 76.)
• Putting Name on Disc (Refer to page 77.)
• Setting or Releasing Disc Protect (Refer to page 78.)
• Erasing Disc (Refer to page 79.)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
Play
Edit
Overwrite
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
• Making Edits Compatible (Refer to page 80.)
6
Note
Edit
• When selecting “Edit” on pop-up menu of the title
list and edit the title, the title list is displayed after
writing the edited contents onto the disc.
• The capacity indicator in the right side of the title list
may not indicate the precise capacity in the disc.
Title Delete
2
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
• The capacity indicator may not indicate the capacity
for the titles of which recording time is short.
• Once you have finalized a DVD+R/ DVD-R, you
cannot edit or record anything on that disc.
NOV/22/07 11:35AM CH13 EP
0:00:59
11 10
9
8
7
1. Title list: List of the titles recorded on the disc, and
their information.
2. Arrow: Indicating there is a previous / next page.
3. Title information: On the first line, title name
(editable) is displayed. On the second line, the length
of the title is displayed.
Empty title: The portion of the disc where there is no
recordings are made. As for the empty title, available
recording time by the selected recording mode is
displayed on the second line.
4. Recording mode: Currently selected recording mode
is displayed here.
5. Capacity indicator: Indicating the position and the
amount of each title in the disc. The portion for the
selected title is highlighted.
6. Thumbnails: A cut from the recorded content is
displayed here.
7. Submenu: Submenus for the selected menu are
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel, and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the
playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [STOP C] to exit the title list.
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Deleting Titles
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
For DVD+RW/DVD-RW, when the last recorded title in the
title list is deleted, the available disc space to record on
will be increased. For DVD+R/DVD-R, the disc space to
record on will not be changed.
Use [K / L] to select “Edit”, then
press [OK].
3
4
5
SP (2Hr)
1
Play
Edit
Overwrite
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
4
PQRS
5
TUV
6
WXYZ
EMPTY TITLE
1:37:52 SP(2Hr)
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Title Delete”,
then press [OK].
o
Edit
s
B
OK
p
TITLE
RETURN
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
j
F
i
B
h
g
C
NOV/21/07 11:00AM CH12 SP
0:00:59
CHANNEL
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Use [K / L] to select “Yes”, then press
[OK].
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
Edit - Title Delete
Yes
1
SEARCH
No
Press [DVD] first.
Press [TITLE].
NOV/21/07 11:00AM CH12 SP
0:00:59
After that, “Are you sure?” will appear, select
“Yes” and then press [OK].
Title will be deleted.
Data will be written onto the disc momentarily.
1
2
Use [K / L] to select a desired title,
then press [OK].
Writing to Disc
90%
SP (2Hr)
1
This operation may take a
while to be completed.
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
After editing is complete, the title list will appear.
e.g.) DVD+RW/DVD-RW
3
EMPTY TITLE
1:37:52 SP(2Hr)
SP (2Hr)
1
EMPTY TITLE
0:21:14 SP(2Hr)
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
Note
3
• Deleted part of the titles in the capacity indicator
changes in color.
EMPTY TITLE
1:37:52 SP(2Hr)
• As for DVD+RW/DVD-RW if you delete the title, deleted
title will be displayed as “EMPTY TITLE”.
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Names on Titles
You can put title names on the titles and change the
names from this menu.
Use [K / L] to select “Yes”, then press
[OK].
STANDBY-ON
4
5
Edit - Edit Title Name
Yes
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
No
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
MY FAVORITE
0:00:59
PQRS
TUV
WXYZ
7
8
9
The name you entered will be activated for the title.
SPACE
CLEAR
.
0
After this operation is completed,
press [RETURN] to exit.
Data will be written onto the disc momentarily.
DISC MENU
SETUP
o
s
B
OK
p
This operation may take a
while to be completed.
TITLE
RETURN
j
F
i
B
h
g
C
Guide to Edit Title Name
1)Use [K / L] to select a desired character set, then
press [OK].
CHANNEL
--
+
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
Select
ABC
abc
123
@ ! ?
1
2
Press
0
<space>
<space>
<space>
0
Use [K / L] to select “Edit Title
Name”, then press [OK].
! ”# $ % & ’( )
+ , - . / : ; < = >
1
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
Edit
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
Title Delete
1
Edit Title Name
Chapter Mark
Hide Chapter
Index Picture
Title Dividing
GHI
ghi
JKL
jkl
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
NOV/21/07 11:00AM CH12 SP
0:00:59
wxyz
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on this page.
1
*1 Press
, character set will be changed to the “ @!? ”
mode automatically.
3
2
9
*2 Press
to
, character set will be changed to the
Edit - Edit Title Name
previous input mode automatically.
• To delete letters, press [CLEAR] repeatedly.
A
a
B
b
2
!
C
c
3
?
1
character set
Holding [CLEAR] to delete all letters.
1
• Use [s / B] to move the cursor to the left and right.
@
• You can enter up to 30 letters.
M
Note
0:00:59
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
area for entering title names
When you finish entering a title name, press [OK].
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Chapter Marks
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
1
2
3
STANDBY-ON
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Press [PLAY B] and then [PAUSE F]
to decide the point at which you will
create a new chapter mark.
• It is convenient to use [H], [G],
[E] and [D] for finding the point to add a
new chapter mark.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Add”, then press
[OK].
s
B
OK
p
TITLE
RETURN
4
Edit - Chapter Mark
Add
1
Delete
j
F
i
B
Delete All
Chapter
2/
2
h
g
C
CHANNEL
--
+
NOV/21/07 11:00AM CH12 SP
0:00:59
REC MODE VCR
DVD
TIMER
AUDIO
REC
Use [K / L] to select “Yes”, then press
[OK].
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
5
Edit - Chapter Mark - Add
SEARCH
Yes
1
No
Chapter
2/
2
F
NOV/21/07 11:00AM CH12 SP
0:00:59
A new chapter mark will be added.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• When the number of chapter marks in a title is 99
and the number of chapter marks in a disc is 254,
chapter marks cannot be added.
• Besides the above-mentioned, it is not likely to be
able to add according to recorded time and number
of chapters.
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
STANDBY-ON
1
2
3
4
5
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [H] / [G] to select a chapter
mark to be deleted.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Delete”, then
press [OK].
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Edit - Chapter Mark - Delete
h
g
C
Yes
1
CHANNEL
No
--
+
Chapter
2/
2
REC MODE VCR
DVD
TIMER
AUDIO
F
REC
NOV/21/07 11:00AM CH12 SP
I
0:00:59
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
The selected chapter mark will be deleted.
SEARCH
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
6
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Clearing Chapter Marks (cont’d)
STANDBY-ON
To delete all chapter marks:
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
1
2
3
4
PQRS
TUV
WXYZ
Use [K / L] to select “Chapter Mark”,
then press [OK].
Submenu will appear.
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
Use [K / L] to select “Delete All”,
then press [OK].
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
Edit - Chapter Mark - Delete All
h
g
C
CHANNEL
Yes
1
No
--
+
Chapter
2/
2
REC MODE VCR
DVD
TIMER
AUDIO
F
REC
NOV/21/07 11:00AM CH12 SP
I
TIMER
0:00:59
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Use [K / L] to select “Yes”, then press
[OK].
5
6
Edit - Chapter Mark - Delete All
Are you sure?
1
Yes
No
Chapter
2/
2
NOV/21/07 11:00AM CH12 SP
0:00:59
All chapter marks will be deleted.
Press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• Remaining time of the disc may decrease when
adding chapter marks or increase when clearing
chapter marks depending on the recording time or
edited contents.
EN 73
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Hiding Chapters
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
1
2
3
4
STANDBY-ON
Use [K / L] to select “Hide Chapter”,
then press [OK].
Submenu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [H] / [G] to decide the
chapter to be hidden.
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
Use [K / L] to select “Hidden”, then
press [OK].
0
DISC MENU
SETUP
o
Edit - Hide Chapter
s
B
Visible
1
OK
p
Hidden
TITLE
RETURN
Chapter
2/
2
Visible
j
F
i
B
NOV/21/07 11:00AM CH12 SP
h
g
C
0:00:59
CHANNEL
--
+
After this operation is completed,
press [RETURN] twice to exit.
Data will be written onto the disc momentarily.
REC MODE VCR
DVD
TIMER
AUDIO
REC
5
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
This operation may take a
while to be completed.
SEARCH
If you want hidden chapters to be “Visible”,
select the chapter to be shown. Then use
[K / L] to select “Visible” at the step 4 on this
page.
Data will be written onto the disc momentarily.
After that, title list is displayed.
Note
• ”Hidden” will be displayed in the preview window
while previewing the hidden chapter.
• When you make all chapters in the title “Hidden”,
“Hidden” is displayed in a thumbnail of the title list.
SP (2Hr)
1
Hidden
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
2
NOV/22/07 11:35AM CH13 EP
NOV/22/07 0:10:33
3
EMPTY TITLE
1:37:52 SP(2Hr)
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting Pictures for Thumbnails
You can set your desired scene as a thumbnail for each
title.
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [H], [G], [E], [D], [PAUSE
F] and [PLAY B] to decide the
picture you want to select as a
thumbnail.
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
Use [K / L] to select “Index Picture”,
then press [OK].
7
8
9
SPACE
CLEAR
.
3
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
4
Edit - Index Picture
TITLE
RETURN
1
Yes
No
j
F
i
B
h
g
C
F
CHANNEL
NOV/21/07 11:00AM CH12 SP
--
+
0:00:59
REC MODE VCR
DVD
TIMER
AUDIO
A picture for thumbnail will be set.
REC
I
Press [RETURN] to exit.
Data will be written onto the disc momentarily.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
5
This operation may take a
while to be completed.
Note
• If the selected picture for a thumbnail is overwritten,
the index picture is reset to the first scene of the title.
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Dividing a Title
Follow steps 1 to 3 in “Deleting
Titles” on page 69 to display “Edit”
menu.
You can divide one title into 2 new titles.
1
2
3
4
Use [H], [G], [E], [D], [PAUSE
F] and [PLAY B] to decide the point
at which you will divide the title.
STANDBY-ON
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Use [K / L] to select “Title Dividing”,
then press [OK].
1
GHI
4
2
JKL
5
3
MNO
6
PQRS
TUV
WXYZ
Use [K / L] to select “Yes”, then press
[OK].
7
8
9
SPACE
CLEAR
.
0
Edit - Title Dividing
DISC MENU
SETUP
o
1
Yes
No
s
B
OK
p
TITLE
RETURN
F
NOV/21/07 11:00AM CH12 SP
j
F
i
B
0:00:59
h
g
C
The title will be divided into 2 new titles.
CHANNEL
Both title names are identical, and index pictures
are reset to the first scene at this point.
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Data will be written onto the disc momentarily.
REC
This operation may take a
while to be completed.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
49, and the number of recording chapters reaches
the maximum of 254.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Putting Name on Disc
You can put a name on the disc and change it from this
menu.
Press [STOP C] if you are playing back a disc.
Press [SETUP].
STANDBY-ON
1
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Disc Edit”, then
press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
PQRS
TUV
WXYZ
Use [K / L] to select “Edit Disc
Name”, then press [OK].
e.g.) DVD+RW
7
8
9
SPACE
CLEAR
3
.
0
Disc Edit
DISC MENU
SETUP
Edit Disc Name
Erase Disc
Make Edits Compatible
o
Disc Protect OFF
ON
s
B
OK
p
TITLE
RETURN
A window for entering a title name will appear.
Edit Disc Name
j
F
i
B
A
a
B
b
2
!
C
c
3
?
h
g
C
No Disc Name
1
Disc
DVD+RW
3
@
Total Titles
CHANNEL
Disc Space Used
Disc Protect
0:30:48
OFF
--
+
Make Edits Compatible
Needed
REC MODE VCR
DVD
TIMER
AUDIO
0:00:00
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
To enter a disc name, follow the steps
of “Guide to Edit Title Name” on page
70.
SEARCH
4
5
When you finish entering a title name, press
[OK].
Use [K / L] to select “Yes”, then press
[OK].
Edit Disc Name
Yes
No
No Disc Name
Disc
DVD+RW
3
Total Titles
Disc Space Used
Disc Protect
Make Edits Compatible
0:30:48
OFF
Needed
MY FAVORITE DISC
0:00:00
The name you entered will be activated for the title.
Data will be written onto the disc momentarily.
This operation may take a
while to be completed.
Note
• You cannot select “Disc Edit” when finalized DVD+R
or DVD-R is inserted.
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Setting or Releasing Disc Protect
To prevent accidental editing, or erasing the titles, you
can protect them.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 77 to display “Disc
Edit” menu.
1
2
STANDBY-ON
Use [K / L] to select “Disc Protect
OFF ON”, then press [OK].
e.g.) DVD+RW
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
Disc Edit
1
GHI
4
2
JKL
5
3
MNO
6
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
• If the disc is already protected, “Disc Protect ON
OFF” will appear instead of “Disc Protect OFF
ON”.
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
3
h
g
C
Protect this disc?
CHANNEL
Yes
No
--
+
REC MODE VCR
DVD
TIMER
AUDIO
Data will be written onto the disc momentarily.
REC
This operation may take a
while to be completed.
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Erasing Disc
Press [STOP C] if you are playing back a disc.
You can erase all titles on a disc.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 77 to display “Disc
Edit” menu.
STANDBY-ON
1
2
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
Use [K / L] to select “Erase Disc”,
then press [OK].
e.g.) DVD+RW
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Disc Edit
Edit Disc Name
Erase Disc
Make Edits Compatible
PQRS
TUV
WXYZ
7
8
9
Disc Protect OFF
ON
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
s
B
OK
p
TITLE
RETURN
Use [K / L] to select “Yes”, then press
[OK].
j
F
i
B
3
When you press “Yes”, all the
contents in the disc will be erased.
Are you sure to erase the disc?
h
g
C
CHANNEL
--
+
Yes
No
REC MODE VCR
DVD
TIMER
AUDIO
Data will be written onto the disc momentarily.
REC
I
This operation may take a
while to be completed.
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• When you select “Yes” at step 3, all contents of the
disc will be erased.
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING DISCS
Making Edits Compatible
Press [STOP C] if you are playing back a disc.
If you have added or deleted chapters, or made chapters
hidden, you must perform “Make Edits Compatible” to
see those effects on other unit.
Follow steps 1 to 2 in “Putting Name
on Disc” on page 77 to display “Disc
1
2
Edit” menu.
STANDBY-ON
Use [K / L] to select “Make Edits
Compatible”, then press [OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Disc Edit
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Edit Disc Name
Erase Disc
Make Edits Compatible
Disc Protect OFF
ON
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
.
0
DISC MENU
SETUP
o
Use [K / L] to select “Yes”, then press
[OK].
s
B
OK
p
TITLE
RETURN
3
Activate the Make Edits Compatible?
j
F
i
B
Yes
No
h
g
C
Data will be written onto the disc momentarily.
CHANNEL
--
+
This operation may take a
while to be completed.
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
The following table is the contents which you can set and the default setting.
Refer to the following table for useful operation.
Setup
Playback
Pages 83-85
Items (highlight is the default)
Parental Lock
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to 1 [Kid Safe]
Disc Audio
Dynamic Range
Control
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will
be down sampled in 48kHz.
48kHz
96kHz
PCM
Dolby Digital
Set the type of sound signal which outputs
from the digital audio output jack.
Stream
Disc Menu Language
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Still Mode
Set whether or not to display the angle icon.
Set the type of still image in pausing playback.
ON
OFF
Auto
Field
Frame
Display
Pages 86-87
OSD Language
Screen Saver
Set the language for OSD (on-screen display).
English
Français
Español
OFF
5minutes
Set the idling time before the screen saver
starts.
10minutes
15minutes
30minutes
FL Dimmer
Auto
Bright
Dark
Set the brightness of the front panel display.
Set the type of the DTV closed caption.
CC Style
Pages 34-36
DTV CC
OFF
Service1
Service2
Service3
Service4
Service5
Service6
User Setting
Font Size
ON
OFF
Set the whether or not CC style setting is
effective.
Set font size of the displayed caption.
Middle
Large
Small
Font Style
Set font style of the displayed caption.
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Edge Type
Set edge type of the displayed caption.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF SETTINGS
Setup
Display
Pages 86-87
Items (highlight is the default)
CC Style Font Opacity
Pages 34-36
Contents
Set the font opacity of the displayed caption.
Solid
Translucent
Flash
Font Color
Transparent
White
Set the font color of the displayed caption.
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
Back Color
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Solid
Translucent
Flash
Transparent
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Set the downloadable rating.
V-Chip00
Downloadable Rating
Change Password
Video
Page 88
Progressive Scan
TV Aspect
ON
Set to the progressive scan mode (set to "ON")
or to the interlace scan mode (set to "OFF").
OFF
Set a picture size according to aspect ratio of
your TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Video Input
Page 47
E1(Rear)
Set the video input type for the external input.
Insert chapter marks at even time interval.
Video In
S-Video In
Video In
E2(Front)
S-Video In
Recording
Auto Chapter
Page 38
OFF
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Auto Finalize
Page 53
Disc Full
ON
Set the unit to finalize the disc automatically.
Set the dubbing direction.
OFF
End of Timer Rec ON
OFF
Dubbing Mode
Pages 49-50
VCR DVD
DVD VCR
Make Recording Compatible
Page 38
ON
OFF
Set to prohibiting additional recording (OFF)
or to replace the title list after recording (ON).
Clock
Pages 29-30
Clock Setting
Auto Clock Setting
Set the clock.
Set the clock automatically.
OFF
Auto
Manual
Daylight Saving Time
Auto Channel Preset
Manual Channel Preset
Set the clock for the daylight saving time.
Tune the channels automatically.
Tune the channels manually.
ON(MAR-NOV)
ON(APR-OCT)
OFF
Channel
Pages 26-28
Antenna
Cable (Analog)
Cable (Analog/Digital)
TV Audio Select
Page 33
Stereo
SAP
Set the analog TV audio type for output and
recording.
Reset All
Page 89
Yes
No
Set to the default setting.
Note
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
82 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback
Press [STOP C] if you are playing back a disc.
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
[OK].
ABC
DEF
“General Setting” menu will appear.
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Playback”, then
press [OK].
PQRS
TUV
WXYZ
7
8
9
General Setting
SPACE
CLEAR
.
Playback
Display
Video
Recording
Clock
0
DISC MENU
SETUP
o
Channel
Reset All
s
B
OK
p
TITLE
RETURN
j
F
i
B
Use [K / L] to select a desired item,
h
g
C
then press [OK].
CHANNEL
3
--
+
Parental Lock
Disc Audio
1
2
3
4
5
6
7
REC MODE VCR
DVD
TIMER
AUDIO
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
REC
I
TIMER
Still Mode
CM SKIP D.DUBBING SET RAPID PLAY
Submenu will appear.
SEARCH
Refer to
set the selected item.
to
on pages 84-85 and
1
7
4
5
When you finish with setting, press
[SETUP] to exit.
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Parental Lock (Default: OFF)
1
Note
• Press [CLEAR] to erase numbers entered incorrectly.
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
will be set to “OFF”.
Use [K / L] to select the desired level, then press [OK].
Parental Lock
Disc Audio
2
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Use [
K
/
L] to select a desired item, then press [OK].
2 [G]
1 [Kid Safe]
Disc Audio
A
If a password has not been set yet, proceed to
If a password has been set already, proceed to
.
.
A
B
Dynamic Range Control
PCM
Dolby Digital
B
C
Note
Dynamic Range Control (Default : ON)
A
• Parental lock function may not be available to some
discs.
Set to “ON” to compress the range between soft and loud
sounds.
Use [K / L] to select a setting, then press [OK].
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
Dynamic Range Control
• Record the password in case you forget it.
ON
OFF
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
Your setting will be activated.
Note
A password has not been set yet.
A
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
Use [K / L] to select “Yes”. Use [the Number buttons] to
enter a new password except for 4737, then press [OK].
Change Password?
Password Input
PCM (Default : 48kHz)
B
Yes
No
Yes
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
A password has been set already.
PCM
48kHz
96kHz
B
• Use [the Number buttons] to enter the current
password.
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
Password Input
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes”. Use [the Number buttons] to enter a new
password, then press [OK].
Note
When playing back disc with copyright protection
<change the password>
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
Change Password?
Password Input
Yes
No
Yes
Your setting will be activated.
84 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Playback (cont’d)
Dolby Digital (Default : Stream)
C
If “Other” is selected for
using [the Number buttons].
to
, press 4-digit code
3
5
Use [K / L] to select a setting, then press [OK].
Dolby Digital
Code Input
PCM
Stream
-
-
-
-
Your setting will be activated.
• When you finish entering the code, press [OK]. Refer
to the language code table on page 97.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Note
Stream : Outputs Dolby Digital signals
• Only the languages supported by the disc can be
selected.
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
• Audio language setting may not be available to
some discs.
• You can change or switch off the subtitles on a DVD
also from the disc menu if it is available.
• Press [CLEAR] or [s] to erase numbers entered
incorrectly.
Disc Menu Language (Default : English)
3
Set the language for disc menu.
Use [K / L] to select a setting, then press [OK].
Disc Menu Language
English
French
Spanish
Other
Angle Icon (Default : ON)
6
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
Angle Icon
Audio Language (Default : Original)
4
ON
OFF
Set the audio language.
Use [K / L] to select a setting, then press [OK].
Your setting will be activated.
Audio Language
Still Mode (Default : Auto)
7
Original
English
French
Spanish
Other
Select “Auto” usually.
Use [K / L] to select a setting, then press [OK].
Still Mode
Your setting will be activated.
• When “Original” is selected, the audio language will be
in the disc’s default language.
Auto
Field
Frame
Subtitle Language (Default : OFF)
5
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
“Frame”) will be selected.
: Images in the still mode will be stabilized.
Set the subtitle language.
Use [K / L] to select a setting, then press [OK].
Field
Frame : Images in the still mode will be highly defined.
Subtitle Language
OFF
Note
English
French
Spanish
Other
•
Frame is 1 completed video image made up of 2
fields (There are 30 frames per second of NTSC video).
Your setting will be activated.
EN 85
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display
Press [STOP C] if you are playing back a disc.
STANDBY-ON
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
1
2
3
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Use [K / L] to select “Display”, then
press [OK].
PQRS
TUV
WXYZ
7
8
9
CLEAR
SPACE
Use [K / L] to select a desired item,
then press [OK].
.
0
DISC MENU
SETUP
o
OSD Language
Screen Saver
FL Dimmer
CC Style
1
2
3
4
5
s
B
OK
p
TITLE
RETURN
V-Chip
Selection menu will appear.
j
F
i
B
Refer to
the selected item.
to
on page 87 and set
h
g
C
1
5
CHANNEL
--
+
4
5
• For
refer to pages 34-36.
4
REC MODE VCR
DVD
TIMER
AUDIO
When you finish with setting, press
[SETUP] to exit.
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
86 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Display (cont’d)
OSD Language (Default : English)
Downloadable Rating
1
A
Set the language for the on-screen display.
Use [K / L] to select a setting, then press [OK].
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
OSD Language
English
Français
Español
Downloadable Rating is currently not available.
Your setting will be activated.
• This message will also appear when you try to access
“DOWNLOADABLE RATING“ after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
Screen Saver (Default : 10 minutes)
2
Set the time to activate the screen saver function on the
TV screen.
To set the rating:
Use [K / L] to select “BLOCK SETTING” then press [OK]
to show the various types of ratings. Use [K / L] to
select a desired rating to set, then press [OK] to show
the levels for the rating. Use [K / L] to select a level,
then press [OK] to switch “VIEW” or “BLOCK”. If you set
one level to “BLOCK”, all the higher levels will be turned
to “BLOCK” automatically.
Use [K / L] to select a setting, then press [OK].
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
To clear the downloadable rating information and its
setting:
Your setting will be activated.
Use [K / L] to select “CLEAR DOWNLOADABLE
FL Dimmer (Default: Bright)
3
RATING”, then press [OK].
Set the front panel display brightness.
Use [K / L] to select a setting, then press [OK].
Change Password
B
Change the current password.
FL Dimmer
Use [the Number Buttons] to enter new access
password.
Auto
Bright
Dark
Note
You can choose one from “Auto”, “Bright” and “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
• When you forget the access password at step 1),
enter 4,7,3,7 using [the Number buttons] in the
password input window. Password will be cleared.
• Depending on the type of rating system, you may set
the levels individually.
V-Chip
5
You can set the viewing limitation for the digital TV
programs to prevent your children from watching
inappropriate programs.
This feature is available only after the digital TV
ratings have been downloaded
• The ratings can be downloaded by the unit
automatically if it is available in your area.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the Number
buttons] to set the access password, then press [OK].
The number you entered will be stored as the access
password.
Password Input
2) Use [K / L] to select a desired item, then press [OK].
V-Chip
A
B
Downloadable Rating
Change Password
EN 87
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Video
Progressive Scan (Default : OFF)
1
STANDBY-ON
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
1) Use [K / L] to select “ON“, then press [OK].
Progressive Scan
PQRS
TUV
WXYZ
ON
7
8
9
OFF
SPACE
CLEAR
.
0
2) Use [{ / B] to select “Yes“, then press [OK].
DISC MENU
SETUP
o
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
s
B
OK
p
TITLE
RETURN
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
j
F
i
B
h
g
C
Activate?
Yes
No
CHANNEL
--
+
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [OK].
Your setting will be activated.
REC MODE VCR
DVD
TIMER
Note
• If your TV is compatible with progressive scan (525p /
480p), you are recommended to use the component
video cable (commercially available) to connect this
unit to the TV. (Refer to “Method 2” on page 18.) If
not, use the RCA video cable and set the progressive
scan to “OFF” or press and hold [SETUP] for more
than 3 seconds during DVD playback.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Press [STOP C] if you are playing back a disc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
1
Use [K / L] to select “Video”, then
press [OK].
2
TV Aspect (Default: 4:3 Letter Box)
2
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired item,
then press [OK].
3
Use [K / L] to select a setting, then press [OK].
1
2
3
Progressive Scan
TV Aspect
Video Input
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Submenu will appear.
Refer to
the selected item.
to
on this page and set
1
2
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
4
5
• For
refer to page 47.
3
When you finish with setting, press
[SETUP] to exit.
If you have a widescreen TV:
Select “16:9 Wide”.
88 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUPS
Reset All
Reset the setting to default.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
[OK].
STANDBY-ON
“General Setting” menu will appear.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
Use [K / L] to select “Reset All”, then
press [OK].
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
2
Select “Yes” using [K / L] , then press
[OK].
PQRS
TUV
WXYZ
7
8
9
SPACE
CLEAR
3
.
Reset to factory default?
0
DISC MENU
SETUP
Yes
No
o
s
B
OK
p
TITLE
RETURN
Select “Yes” again using [K / L] ,
then press [OK].
4
j
F
i
B
Are you sure?
h
g
C
Yes
No
CHANNEL
--
+
Your setting in recording will be initialized.
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
TIMER
CM SKIP D.DUBBING SET RAPID PLAY
SEARCH
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
– OSD language setting
– Channel setting
– Clock setting
– Parental lock setting
– V-Chip setting
– Timer programming information
EN 89
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Playback
Recording
Press [VCR] first.
Press [VCR] first.
1)Insert a prerecorded tape (refer to page 24 on how
to insert a cassette tape).
1)Insert a recordable tape with an erase-protection
tab intact.
Accidental erasure prevention
2)Press [PLAY B] to start playback.
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
3)Press [STOP C] to stop playback.
erase-protection tab
the hole with cellophane tape.
To pause playback:
Press [PAUSE F].
Playback will pause and sound will be muted.
To resume playback:
Press [PLAY B].
2)Select the recording mode using [REC MODE].
• The desired recording mode is selected in SP
(standard play) or SLP (super long play) mode by
pressing [REC MODE].
Recording mode:
Note
Tape speed
Type of tape
SP mode
Recording / playback time
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
T60
T120
T160
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[CHANNEL
1hour
2hours
6hours
2-2/3hours
8hours
SLP mode
3hours
/
] on the remote control.
• S-VHS cassette tape is not available on this unit.
3)Select stereo or SAP. Refer to page 33.
4)Select the desired channel to record using
[CHANNEL ] or [the Number buttons].
/
5)Press [REC I] to start recording.
Press [STOP C] to stop the recording.
To pause recording:
Press [PAUSE F].
To resume recording:
Press [PAUSE F] or [REC I].
After the unit has been in pause mode for 5 minutes, it
will stop automatically to protect the tape and the
video head from damage.
• Refer to pages 41-44 for instructions on timer recording.
90 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
One-touch Timer Recording (OTR)
Index Search
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
Press [VCR] first.
1)Insert a recordable tape with an erase-protection
tab intact.
1)Press [SEARCH] so that “INDEX SEARCH” menu
appears.
2)Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
2)Select the recording mode using [REC MODE].
(Refer to “Recording” on page 90.)
INDEX SEARCH
03
3)Select stereo or SAP. Refer to page 33.
4)Select the desired channel to record using
[CHANNEL
/
] or [the Number buttons].
5)Press [REC I] to begin the one-touch timer
recording.
3)Press [E], [D] to start index search.
If you want to go in the forward direction, press [D].
If you want to go in the reverse direction, press [E].
You can select a fixed recording time by pressing
[REC I] repeatedly.
After index search, the VCR will play back the cassette
tape automatically.
(0:30)
(1:00)
(Normal recording)
(8:00)
(7:30)
CURRENT PROGRAM
Beginning
End
When the one-touch timer recording is finished, the
unit will turn off automatically.
of tape
of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
To change the recording length during the one-
touch timer recording:
INDEX MARK
Press [REC I] repeatedly until the desired length
appear.
Note
• You can make the index mark up to 20.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
Note
• The remaining recording time will be displayed on
the front panel display during one-touch timer
recording. Press [DISPLAY] to see it on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power to stop one-touch timer
recording.
- Using [REC I] or [STOP C] on the remote control.
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
timer standby mode automatically if a timer
recording has been programmed. Press [TIMER SET]
to cancel the timer standby mode for using the unit
continuously.
EN 91
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR FUNCTIONS
Time Search
Other Operations
This feature allows you to go to a specific point on a
cassette tape by entering the exact amount of time you
wish to skip in order to reach the point.
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [D] to fast forward
the cassette tape.
Press [VCR] first.
1)Press [SEARCH] repeatedly so that “TIME SEARCH”
menu appears.
Rewind:
When the unit is in stop mode, press [E] to rewind the
cassette tape.
To cue or review picture during playback (picture search):
Press [E], [D] during playback.
Press it again and the unit will search in super high
speed. (in the SLP mode only)
To freeze the picture on TV screen during playback
(still mode):
2)Using [the Number buttons], enter your desired
time to skip within 30 seconds.
You can set the time up to 9:59.
TIME SEARCH
2:50
Press [PAUSE F]. Each time you press the button, the
picture will be forwarded by one frame.
If the picture begins to vibrate vertically during the still
mode, stabilize the picture by pressing [CHANNEL
/
]
3)Press [E], [D] to start time search.
If you want to go in the forward direction, press
[D].
If you want to go in the reverse direction, press
[E].
After time search, the unit will play back the cassette
tape automatically.
on remote control.
If the picture is distorted or rolling vertically, adjust the
vertical hold control on your TV, if equipped.
Counter reset:
Press [CLEAR] to reset the counter to “0:00:00”.
To playback in slow motion:
Press [PAUSE F] during playback, then press [D].
Press [D] or [E] repeatedly to select the desired
Note
speed.
• Index search and time search are not available
during recording.
Automatic rewind:
When a cassette tape is played back or fast forwarded to its
end, the cassette tape will rewind to the beginning, stop
and eject itself.
When you playback a cassette tape recorded in Hi-Fi
stereo:
• Press [STOP C] to stop the search.
• If the end of the cassette tape is reached during
search, this unit will cancel the search and rewind the
cassette tape.
Press [AUDIO] on the remote control to select Hi-Fi or
MONO for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select
“MONO”.
Your Selection
HIFI
MONO
Monaural
L+R
L-channel
R-channel
Type of recorded tape
non Hi-Fi tapes
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program program program
Note
• Still/slow mode will stop after 5 minutes to prevent
damage to the cassette tape and the video head.
• To return to playback from the picture search/still/
slow mode, press [PLAY B].
92 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Check the breaker (in case of power failure).
• Press [TIMER SET] to cancel the timer standby mode.
There is no picture.
• Re-connect the connecting cords securely.
• Check if the connecting cords are damaged.
• Check the connection to your TV (page 18).
• Switch the input selector on your TV (such as to “E1”) so that the signal
from the unit appears on the TV screen.
TV program reception does not fill the • Try to set the channels with “Auto Channel Preset” or “Manual Channel
TV screen.
Preset” in “Channel” menu (pages 26-28).
• Select a channel of any TV program using [CHANNEL
/
].
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture. (Refer to the TV’s instruction manual.)
• Place the unit and TV farther apart.
• Place the TV and any bunched RF coaxial cables farther apart.
TV channels cannot be changed.
• Switch the input to TV.
• Connect the RF coaxial cable correctly (pages 15-17).
There is no sound or the sound is
distorted.
• Re-connect all connections securely.
• Check if the connecting cord is damaged.
• Check the connections to the amplifier input.
• Check if the input device setting on the amplifier is correct.
• When the unit is in pause mode or in slow-motion playback mode,
sound is not output. This is not a malfunction.
• When the unit is in fast forward or fast reverse mode, sound is not
output. This is not a malfunction.
The remote control does not function. • Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Check if the unit is turned on.
• Check if you are pointing the remote control at the recorder and NOT
the TV.
If you have a plasma TV, it may interfere with the IR signal. Try the
remote with the plasma off. If the remote works, you may need to move
the unit away from the plasma TV.
• Press [DVD] or [VCR], whichever you need. Then, try again.
• Press [TIMER SET] to cancel the timer standby mode.
The unit does not operate properly.
Playback picture is distorted.
• When static electricity, etc., causes the unit to operate abnormally,
unplug the unit and then plug it in again.
• Keep the device which may cause electrical disturbances, such as a
cellular phone, away.
The channel cannot be changed from • Set the TV’s input to “TV.”
the channel you are recording.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for
more than 30 seconds. Reset the clock (pages 29-30).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Timer recording is not complete or did • The timer setting overlapped with another setting that has priority
not start from the beginning.
(page 44).
• Disc space was not enough.
Timer recording is impossible.
• Make sure
[TIMER SET].
appears on the front panel display of this unit. If not, press
EN 93
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
There is no picture.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 88).
Picture noise appears.
There is no sound.
• Clean the disc with a cleaning cloth.
• If you are using DIGITAL AUDIO OUT (COAXIAL) jack, check the setting in
“Disc Audio” (pages 84-85).
• Clean the disc with a cleaning cloth.
Sound is noisy.
• Clean the disc with a cleaning cloth.
No DTS sound is output.
The disc does not play back.
• This unit is not compatible with DTS sound.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 54).
• The region code on the DVD-video does not match the unit (page 54).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Discs recorded on this unit cannot be • If you are using DVD-RW/-R, please ensure you finalized the disc after
played back on other DVD players.
recording (pages 52-53).
The disc does not start playback from
the beginning.
• Resume playback was activated (page 60). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
The unit starts playing back the disc
automatically.
• The DVD-video features an auto playback function.
Some functions such as stop, search,
or slow-motion playback cannot be
performed.
• Depending on the disc, you may not be able to do some of the
operations. Refer to the instruction manual supplied with the disc.
The language for the sound track
cannot be changed.
• The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound
track.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording does not stop immediately
after you press [STOP C].
• It may take a few seconds for the unit to input disc data before
recording stops.
The disc tray does not open when you
press [OPEN/CLOSE A].
• It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc data to
the disc.
“Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In a case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [OPEN/CLOSE A]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
94 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Symptom
Remedy
Picture noise appears.
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
(page 5).
• Adjust tracking control for better picture by pressing [CHANNEL
while you are playing back a cassette tape.
/
]
The cassette tape does not play back. • No cassette tape is inserted.
Recording does not start after you press • Make sure the cassette tape has an erase-protection tab when you
[REC I].
record to a cassette tape. If needed, cover the hole with cellophane
tape.
The remote control does not function. • Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with cable/satellite
box?
Yes, you can. Select “E1” or “E2” as your recording
channel, and leave the cable / satellite box on (pages 17,
41-44).
– Can I record one channel while watching another
channel using a cable / satellite box?
It depends on your connection configurations. For
more details, please kindly contact your cable / satellite
provider.
– Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 16). This unit does not have an RF modulator.
– Can I change the channels on the cable / satellite box
using the remote control of this unit?
No. Changing the channels on the cable / satellite box
using this unit’s remote control is not possible. You
need to use the remote control supplied with the cable /
satellite box to change the channels on the cable / satellite
box.
Note for Output Jacks on the Rear Panel
OUT
DVD
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO COMPONENT S-VIDEO IN ---AUDIO---OUT
VIDEO OUT
Y
L
L
IN
ANTENNA
PB
/CB
R
R
L
OUT
IN
COAXIAL
IN ---VIDEO---OUT
PR
/CR
R
1
2
3
4
5
Available for
Output Jacks
DVD mode only
VCR mode
1 (COAXIAL DIGITAL AUDIO OUT)
✔
✔
✔
✔
✔
✔
2 (AUDIO OUT)
3 (S-VIDEO OUT)
4 (COMPONENT VIDEO OUT - interlace)
4 (COMPONENT VIDEO OUT - progressive)
5 (AUDIO/VIDEO OUT)
✔
✔
: Available
: Not available
EN 95
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Disc Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which bear
the marks on page 54.
• Insert the disc with the labeled side
facing up.
— Please eject the disc. —
Playback feature may not be available on
this Disc.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 84).
Recording Error
This program is not allowed to be
recorded.
• The recording function encountered
the copy prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in +VR
mode.
• You are trying to record the copy-once
program.
• You cannot record the copy-once
program.
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (page 37).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This disc is protected and not recordable.
• You are trying to record on to the
protected disc which is set in “Disc Edit”
menu.
• Release the disc protect setting in “Disc
Edit” menu (page 78).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
• You are trying to record onto the disc
on which the number of recording titles
comes up to the maximum (49).
• Delete unnecessary titles (page 69).
You cannot record more than 49 titles on
one disc.
(The maximum is 49)
Recording Error
• You are trying to record onto the
DVD+RW or DVD-RW on which the
number of recording chapters comes
up to the maximum (254).
• Delete unnecessary chapter marks
(pages 72-73).
You cannot record more than 254 chapters
on one disc.
(The maximum is 254)
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
• When recordings are performed
repeatedly onto an unstable disc, this
area may come up to be full.
• Insert a new disc.
• Every time you insert a disc for
recording, the disc’s working area will
be taken up. And if you repeat this
frequently, it will be used up sooner
and you may not be able to record full
49 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Release the finalizing for this disc
(page 52).
Recording Error
• You are trying to record onto the
disc that had been recorded by other
recorders.
• Set “Make Recording Compatible” to
“ON” to rewrite the menu, after that you
will record to disc (page 38).
The disc has no recording compatibility.
Set “Make Recording Compatible” to
“ON” to convert the disc.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized Service Center.
96 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
EN 97
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PBC (playback control) (video CD only)
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
This function enables you to play back interactive
software using a menu screen. See also “Video CD”.
PCM (pulse code modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a
lot of data compared to formats such as Dolby Digital
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Chapter
Progressive Scan (525p/480p)
Just as a book is split up into several chapters, a title on a
DVD is usually divided into chapters. See also “Title”.
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(525i/480i) TV signals. Refer to page 88 for instructions on
selective progressive scan mode.
Component Video Out
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video
(525p/480p), you can experience higher-density picture
than that in interlace (525i/480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
Dolby Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Finalize
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
To make DVD, which have been recorded on, possible to
play back in DVD players. With this unit, it is possible to
finalize DVD+R, DVD-RW, and DVD-R.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
Title (DVD only)
A collection of chapters on DVD. See also “Chapter”.
Track
Audio CD use tracks to divide up the content of a
disc. The DVD equivalent is called a chapter. See also
“Chapter”.
Video CD
A digital format for store video data in compact disc.
98 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
General
DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R
VHS cassette tape
System
VCR video heads
Four heads
Power requirements
Power consumption
Dimensions (width x height x depth)
Weight
120V AC +/-10%, 60Hz +/-5%
30W (standby: 3.3W)
17 3/16 x 3 15/16 x 10 1/4 inches (435 x 99.5 x 260mm)
9.5 lbs. ( 4.3kg )
Operating temperature
Operating humidity
TV format
41°F (5°C) to 104°F (40°C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
Recording
Recording format
+VR (video recording) format
DVD+Rewritable, DVD+Recordable
DVD-Rewritable, DVD-Recordable (+VR mode only)
Recording discs
Video recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
Audio recording format
Sampling frequency
Compression format
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A
Terminals
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
1Vp-p (75Ω)
Video input
RCA jack x 1
S-video input
Mini DIN 4-pin x 1
VHF/UHF/CATV input and output
F-type
Y: 1Vp-p (75Ω)
C: 286mVp-p (75Ω)
75Ω unbalanced
Audio input
RCA jack x 2
2V rms (input impedance: more than 22kΩ)
2V rms (output impedance: more than 1kΩ)
1Vp-p (75Ω)
Audio output
RCA jack x 4
Video input
RCA jack x 1
Video output
RCA jack x 1
1Vp-p (75Ω)
S-video input
Mini DIN 4-pin x 1
S-video output
Mini DIN 4-pin x 1
Component video out
RCA jack x 3
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
Y: 1Vp-p (75Ω)
500mVp-p (75Ω)
C: 286mVp-p (75Ω)
C: 286mVp-p (75Ω)
PB/CB: 700mVp-p (75Ω)
PR/CR: 700mVp-p (75Ω)
Coaxial digital audio out
RCA jack x 1
Note
• The specifications and design of this product are subject to change without notice.
EN 99
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos Reproducibles
Disco Grabable
Este aparato es compatible con la reproducción de los
siguientes discos y archivos.
Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y
DVD-R.
Los discos DVD+R/DVD-R pueden ser grabados sólo una
vez. Los discos DVD+RW/DVD-RW pueden ser grabados y
borrados muchas veces.
En este aparato los discos DVD-RW/-R serán grabados
automáticamente en el modo DVD+VR.
Discos reproducibles
DVD-video
Logotipos
Logotipo
Atributos
DVD+RW
DVD+R
Disco de 8 cm / 12 cm, un solo lado,
una sola capa
DVD+RW
DVD+R
Tiempo de grabación máx. aprox.
(modo SLP):
360 minutos (4,7 GB) (para 12 cm)
108 minutos (1,4 GB) (para 8 cm)
DVD-RW
(Sólo discos en modo de video finalizados)
DVD-R
(Sólo discos en modo de video finalizados)
DVD-RW
DVD-R
• Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados
como compatibles con este aparato. Sin embargo, según
sea la condición del medio el equipo podría no leer el
disco correctamente.
CD-DA (CD de audio)
CD de video
Verbatim
DVD+R 8x,
DVD-R 8x,
DVD-RW 4x
DVD+RW 4x,
DVD-RW 2x
JVC
Maxell
SONY
TDK
DVD+R 4x/8x/16x, DVD-R 8x/16x
DVD+R 4x/8x/16x, DVD+RW 4x
DVD+R 4x/8x/16x
CD-RW
CD-R
El comportamiento de cualquier otro disco no está
garantizado.
• Usted puede reproducir discos DVD+RW en la
mayoría de los reproductores de DVD sin finalizarlos.
Sin embargo, si usted ha añadido o eliminado
capítulos, u ocultado capítulos, debe ejecutar
“Compatibilizar edic.” antes de poder ver dichos
efectos en otros equipos. (Consulte la página 80.)
Para reproducir discos que no sean DVD+RW en
otros reproductores de DVD, usted necesitará
finalizarlos.
Archivos reproducibles
Medio
CD-DA
CD-RW/-R
MP3
es una marca registrada de
DVD Format/Logo Licensing Corporation.
Disco no Grabable
• Un DVD-RW grabado en un modo distinto de +VR no
será grabable en este aparato a menos que usted borre
todo el contenido del disco. (Consulte la página 79.)
• Un DVD-R grabado en un modo distinto de +VR no será
grabable en este aparato.
Códigos de Región
El número presente en el interior
el globo se refiere a una región
del mundo.Este aparato puede
reproducir discos DVD que estén
rotulados para ALL las regiones o
para la región 1.
100 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión básica ilustrada más abajo.
parte trasera de este aparato
OUT
DVD/VCR
IN ---AUDIO---OUT
DVD/VCR
S-VIDEO IN ---AUDIO---OUT
antena de
VHF / UHF
L
L
S-VIDEO
IN
ANTENNA
R
R
OUT
IN
IN
IN ---VIDEO---OUT
L
cable coaxial
de RF
R
IN
ANTENNA
o
IN ---VIDEO---OUT
empresa de
TV por cable
cable coaxial
de RF
parte trasera de su televisor
Esta conexión es sólo para
el procesamiento de cada
elemento de la señal de TV
cable de
cable de
video RCA
audio RCA
R
L
ANT. IN
AUDIO IN VIDEO IN
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
Conexión a Una Caja de TV por Cable / Satelital
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión como se ilustra abajo.
ej.)
cable de S-video
cable de video RCA
o
cable de audio RCA
parte trasera de este aparato
OUT
DVD/VCR
DVD/VCR
OUT
IN
S-VIDEO IN --- AUDIO---OUT
S-VIDEO
IN --- AUDIO---OUT
L
L
IN
ANTENNA
B
R
R
IN
R
L
S-VIDEO
OUT
IN ---VIDEO---OUT
AUDIO OUT VIDEO OUT
L
caja de TV por
cable/satelital
ANTENNA
R
IN
cable
coaxial
de RF
IN ---VIDEO---OUT
Esta conexión es sólo
para el procesamiento
de cada elemento de
la señal de TV
cable
coaxial
de RF
ANT. IN
RF OUT ANT. IN
antena
parabólica
satelital
rasera de su televisor
cable de
audio RCA
cable de
video RCA
cable coaxial
de RF
o
R
L
VIDEO IN
AUDIO IN
empresa de
TV por cable
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
ES 101
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación Básica
Configuración Inicial
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Presione [DVD].
Presione [OPEN/CLOSE A] para abrir la
bandeja de discos e insertar su disco
con el rótulo aupntando
1
Presione [STANDBY-ON y].
Encienda el televisor. Seleccione la entrada a
1
hacia arriba.
la cual está conectado el aparato.
* Asegúrese de que el disco sea compatible
con este aparato.(Para obtener la lista de
discos compatibles consulte la página 37.)
Utilice [K / L] para seleccionar su
idioma deseado, y luego presione
[OK] para establecerlo.
Para seleccionar un modo de
2
grabación presione [REC MODE].
Initial Setup
Calidad del video
y el sonido
Modo de
grabación
Tiempo de
grabación
2
Disco de 8 cm Disco de 12 cm
OSD Language
HQ (1Hr)
SP (2Hr)
SPP (2.5Hr)
LP (3Hr)
EP (4Hr)
SLP (6Hr) 108 min
18 min
36 min
45 min
54 min
72 min
60 min
120 min
150 min
180 min
240 min
360 min
Buena
English
Français
Español
Deficiente
Utilice [K / L] para seleccionar el tipo
de señal de emisión, y luego presione
[OK].
Presione [DTV/TV] para seleccionar
TV analógica o TV digital, luego y
utilice [CHANNEL
botones numéricos] para seleccionar
un canal que se desee grabar.
3
Ajuste inicial
3
4
/
] o [los
Ajuste de Canal
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
Antena
Cable (Analógico)
Cable (Analógico/Digital)
Presione [REC I] para iniciar la
grabación.
El equipo comenzará a obtener los canales
disponibles en su región.
Para configurar la grabación a un toque con
temporizador (OTR)...
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Presione [REC I] repetidamente hasta que aparezca en la
pantalla del televisor la longitud deseada de grabación (30
minutos a 6 horas).
Presione [OK] para activar “Ajste
Manual de Reloj”.
4
5
Ajuste inicial
Comenzará la grabación a un toque con temporizador.
Ajste Manual de Reloj
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
I
0:30
0:30
(grabación normal)
1:00
6:00
5:30
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice [K /
para seleccionar el contenido de su
preferencia, y luego presione [OK].
L]
Para cambiar la duración de la grabación durante la
grabación a un toque con temporizador:
Presione [REC
I] repetidamente hasta que aparezca la
duración deseada.
Ajuste inicial
Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado:
Presione [STOP C].
Ajste Manual de Reloj
ENE / 01 / 2007 ( LUN )
12 : 00 AM
Para de tener la grabación presione
[STOP C].
5
102 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Grabación con Temporizador
Usted puede programar el equipo para que grabe hasta 12
programas, con un mes de anticipación. También hay
disponibles grabaciones de programas diarias o semanales.
Antes de grabar, asegúrese de que
• Antes de establecer una programación del temporizador
configure el reloj.
Presione [TIMER].
1
2
Utilice [K / L] para seleccionar “Prog.
nuevo”, y luego presione [OK].
Programaci. con Reloj
• Inserte un disco grabable con suficiente espacio libre o
una cinta de cassette con una lengüeta de grabación.
LUN ENE/01 11:00AM
Fcha
Empieza Termina
Prog. nuevo
CH
STANDBY-ON
Configure una programación del
temporizador.
SOURCE
.@/:
DTV/TV
DISPLAY OPEN/CLOSE
A
3
4
5
ABC
DEF
1
GHI
4
2
JKL
5
3
MNO
6
Presione [OK].
PQRS
TUV
WXYZ
7
8
9
Presione [TIMER SET] para configurar
una programación del temporizador.
SPACE
CLEAR
.
0
Aparecerá
en el pantalla del panel frontal.
DISC MENU
2
o
Configure la fecha.
s
B
o
p
Fcha
ENE/02
CH
Empieza
- - : - -
GRAB a
DVD
Termina
- - : - -
Modo
SP
OK
p
TITLE
B
DTV125. 1
4
SP
2 : 00
Configure las horas de inicio y finalización.
j
F
i
B
o
Fcha
ENE/02
CH
Empieza
12 : 00AM
GRAB a
DVD
Termina
- - : - -
Modo
SP
h
g
C
s
B
B
DTV125. 1
p
CHANNEL
SP
2 : 00
--
+
Seleccione un modo deseado de entrada y el canal
a grabar.
Para obtener más detalles, consulte “How to select a
channel number for the timer recording” en la página
43 del manual del usuario.
REC MODE VCR
DVD
TIMER
AUDIO
REC
I
1
TIMER
SET
ej.) modo digital
CM SKIP D.DUBBING
RAPID PLAY
o
Fcha
ENE/02
CH
Empieza
12 : 00AM
GRAB a
DVD
Termina
1 : 00AM
Modo
s
B
SE5
B
DTV125. 1
SP
p
SP
1 : 00
Seleccione un medio de grabación (“DVD” o “VCR”).
Fcha
ENE/02
CH
Empieza
12 : 00AM
GRAB a
DVD
Termina
1 : 00AM
Modo
o
B
DTV125. 1
SP
p
SP
1 : 00
Seleccione un modo de grabación.
Fcha
ENE/02
CH
Empieza
12 : 00AM
GRAB a
DVD
Termina
1 : 00AM
Modo
o
DTV125. 1
SP
p
SP
1 : 00
Reproducción
Abra la bandeja
de discos.
OPEN/CLOSE
Inserte un disco.
Comience a
reproducir.
Detenga la
reproducción.
1 2 3 4
C
B
A
ES 103
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-605-8610
http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E9H80UD/E9H87UD/E9H88UD
1VMN23648A ★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|