1
E
N
17C13A2E
AutoScan Color Monitor
English
Operating Instructions ................. 2 - 19
Français
Mode d'emploi
…………… 20 - 37
Appendix
English
Declaration FCC
........ A1
Information for Users in the U.S. ...... A3
Warranty/address
Hinweis/GS/ACHTUNG
Declaration FCC
A5 ... A6
........ A4
........ A2
Deutsch
Français
For Customer Use:
Enter below the Serial No. which is located on the
back of the cabinet. Retain this information for
future reference.
Model No. 17C13A2E
Serial No.
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER(OR BACK)
NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This "bolt of lightning" indicates that uninsulated material
within your unit may cause an electrical shock. For the safety
of everyone, do not remove product covering.
This "exclamation point" calls attention to a feature for which
you should read the enclosed literature carefully to prevent operating
and maintenance problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
E
N
Note: If you experienced your monitor display is changing from color
to mono, it's possible that you are using a non-VESA-DDC-standard
video card. Please consult with your local PHILIPS dealer for more
information.
As an Energy Star Partner, MAGNAVOX, has determined that this
product meets the Energy Star guidelines for energy efficiency.
IBM, IBM PC and Power PC are registered trademarks of International
Business Machines Corporation.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
E
N
Safety precautions and maintenance
N Disconnect the monitor from the mains supply if the monitor is not
to be used for an extended period of time.
N Do not attempt to remove the back cover, as you will be exposed to
a shock hazard. The back cover should only be removed by qualified
service personnel.
N Do not place objects on top of the monitor cabinet, which could fall
into vents or which could cover them and prevent proper cooling of
the monitor’s electronic devices.
N
Do not expose the monitor to rain or excessive moisture to avoid the
risk of shock or permanent damage to the set.
N Do not use alcohol or ammonia based liquid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
from the mains supply before cleaning.
N Consult a service technician if the monitor does not operate normally
when operating instructions of this manual are followed.
Package
Your package includes the following items:
•
•
•
•
The monitor (integrated with tilt / swivel pedestal)
Power cord
Interface cable (flying-in)
MAC adapter
End of life disposal
Your new set contains materials which can be recycled and reused.
Specialized companies can recycle your product to increase the amount
of reusable materials and to minimize the amount of materials to be
disposed of.
Please inform yourself on local regulations on disposal of your old set.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
E
N
Installation
Important: Please refer to the user’s manuals of your computer and
video adapter to make sure these equipments are properly installed
and configured before installing the monitor.
Positioning / Ventilation
N Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources.
N To prevent overheating, make sure that the ventilation openings of
the monitor are not covered.
N Keep moisture and dust away.
N Keep away from any magnetic objects, such as speakers, electric
motors, transformers, ...etc.
N When positioning this monitor, make sure that the mains plug and
socket are easily accessible.
Pedestal
With the built-in pedestal you can tilt and / or swivel the monitor for a
most comfortable viewing angle.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
E
N
Connection
Important: Please make sure the AC power to your computer is
“OFF” before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal injury
as well as permanent damage to your computer equipments.
•
Connect the monitor to the computer using the supplied interface
cables. Connection with computer system other than IBM PC or
Apple computers may need different type of adapters. Please consult
your computer supplier for these adapters. Connect the power cord
to a wall outlet after the interface cable is properly connected.
Monitor rear view
1) IBM PC connection
2) Apple's connection
3) Mains connection
3
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7
E
N
Control locations and functions
Monitor control panel
N
N
N
N
N
Descriptions of knobs and keypads on front control panel
N
N
N
√
• Press this knob to switch ON and OFF of monitor’s power.
• OSD rotary control knob.
• Active OSD menu.
• Adjust contrast of the display.
• Adjust brightness of the display.
N
Download from Www.Somanuals.com. All Manuals Search And Download.
8
E
N
OSD menu tree structure
First Level
Second Level
Third Level
BRIGHTNESS & CONTRAST
BRIGHTNESS
CONTRAST
SAVE
CANCEL
SIZE & POSITION
HORIZONTAL SIZE
HORIZONTAL POSITION
VERTICAL SIZE
VERTICAL POSITION
SAVE
CANCEL
GEOMETRY
PINCUSHION
TRAPEZOID
TILT
SAVE
CANCEL
COLOR TEMPERATURE
9300K
RED
6500K
GREEN
BLUE
USER COLOR #1
USER COLOR #2
SAVE
SAVE
CANCEL
CANCEL
V
DEGAUSSING
MOIRE CANCELLATION
SAVE
SPECIAL
H
SAVE
CANCEL
CANCEL
RECALL BRIGHTNESS & CONTRAST
RECALL SIZE & POSITION
RECALL GEOMETRY
RECALL FACTORY
PRESETS
SAVE
CANCEL
EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
9
E
N
On-Screen-Display
Activating the On-Screen-Display
The monitor controls are accessed by pressing button
to enable OSD
(On-Screen-Display). The main menu will be displayed as follows.
1280 x 768 68.7k 85Hz
1
2
3
4
5
6
Each Sub-Menu (1-6) is selected by highlighting it via the rotary control
and pressing button
bottom of the main menu and press select button
While operating Sub-Menu, please use rotary control
adjust and press button to confirm.
to confirm. To exit OSD, highlight
at the
.
to select or
Note: If adjustment or selection of any OSD menu is not made for more
than 20 seconds, the current setup will be saved and the OSD will
disappear automatically.
Sub Menu-1: BRIGHTNESS & CONTRAST
N
Brightness : Adjusts background brightness
1
1
63%
Download from Www.Somanuals.com. All Manuals Search And Download.
10
E
N
N
Contrast : Adjusts contrast between foreground and background.
1
1
63%
N
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
Sub Menu-2: SIZE & POSITION
Horizontal Size : Adjusts image width
N
2
2
A
A
63%
N
Horizontal Position : Moves image left or right
2
2
A
A
63%
Download from Www.Somanuals.com. All Manuals Search And Download.
11
E
N
N
Vertical Size : Adjusts image height
2
2
A
A
A
63%
N
Vertical Position : Moves image up or down
2
2
A
63%
N
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
Sub Menu-3: GEOMETRY
N
Pincushion : Adjusts the amount of curvature on the vertical
edges.
3
3
A
A
63%
N
Trapezoid : Equalizes the length of the top and bottom edges.
3
3
A
A
63%
Download from Www.Somanuals.com. All Manuals Search And Download.
12
E
N
N
Tilt : Tilts the image clockwise or counter-clockwise.
3
3
A
63%
N
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
Sub Menu-4: COLOR TEMPERATURE
9300°K : Factory preset color temperature of 9300°K.
N
4
4
9300ºK 6500ºK
9300ºK 6500ºK
1
2
1
2
N
6500°K : Factory preset color temperature of 6500°K.
4
4
9300ºK 6500ºK
9300ºK 6500ºK
1
2
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
13
E
N
N
User 1 : User set 1 for color temperature then select R, G or B
for adjustment.
1
R
G
B
: Adjusts red intensity.
: Adjusts green intensity.
: Adjusts blue intensity.
4
4
4
4
9300ºK 6500ºK
9300ºK 6500ºK
9300ºK 6500ºK
9300ºK 6500ºK
1
2
1
2
1
2
1
2
R
63%
63%
63%
R
63%
63%
63%
R
63%
63%
63%
G
B
G
B
G
B
N
User 2 : User set 2 for color temperature then select R, G or B
for adjustment.
2
R
G
B
: Adjusts red intensity.
: Adjusts green intensity.
: Adjusts blue intensity.
4
4
4
4
9300ºK 6500ºK
9300ºK 6500ºK
9300ºK 6500ºK
9300ºK 6500ºK
1
2
1
2
1
2
1
2
R
63%
63%
63%
R
63%
63%
63%
R
63%
63%
63%
G
B
G
B
G
B
N
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
E
N
Sub Menu-5: SPECIAL
N
Manual Degauss : Discoloration of the image can be caused
by gradual magnetization of the monitor
components. This is particularly likely to
occur when the monitor is moved or rotated.
The monitor may "buzz" momentarily when
the user control is selected and the image
will change color and wobble for a few
seconds. These effects are normal.
5
5
N
Moire Cancellation : Moire effect may be found in some display
modes. If this is the case, please use "Moire
Cancellation" function to reduce Moire
effect.
5
5
V
H
63%
63%
N
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
E
N
Sub Menu-6: RECALL FACTORY PRESETS
Recall : Recall brightness and contrast presets.
N
7
7
N
Recall : Recall size and phase presets.
7
7
N
Recall : Recall geometry preset.
7
7
N
Save : Save user adjustment and return to main menu.
Cancel : Abandon setup and return to main menu.
N
* Whenever the signal cable is disconnected, the screen will appear a
message as below:
C H E C K S I GNA L C A B L E
Download from Www.Somanuals.com. All Manuals Search And Download.
16
E
N
Data Storage
(A) Factory preset mode:
This monitor has 11 factory-preset modes as indicated in the following
table:
Frequence
Sync polarity
Mode
M01 VGA
Resolution H(KHz) V(Hz)
H
–
–
–
–
+
+
+
–
+
+
+
V
+
–
–
–
+
+
+
–
+
+
+
640x400
640x480
640x480
640x480
800x600
800x600
800x600
1024x768
1024x768
1024x768
1280x1024
31.5
31.5
37.5
43.3
37.8
46.9
53.7
48.4
60.0
68.7
64.0
70
60
75
85
60
75
85
60
75
85
60
M02 VGA
M03 VGA
M04 VESA
M05 SVGA
M06 SVGA
M07 VESA
M08 VESA
M09 VESA
M10 VESA
M11 VESA
* Does not support sync-on-green.
(B) User mode
In addition to factory preset modes, the monitor can also provides
additional 11 User-defined modes.
If the input video signal is different from our factory-preset modes,the
new timing data will be automatically stored. However, the displayed
parameters may need to be adjusted. User can adjust the parameters
via OSD, as preced ing proced u res w hich alread y d escribed on
"Adjustment via On-Screen-Display" section.
(C) New mode
The monitor is reversed for 4 new modes in case non-standard video
modes are used.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
E
N
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed
in your PC, the monitor can automatically reduce its power consumption
when not in use. And if an input from keyboard, mouse or other input
devices is detected, the monitor will automatically “wake up”. The
following table shows the power consumption and signalling of this
automatic power saving feature:
Power Management Definition
VESA's mode Video
H-sync
V-sync
Power
used
Power
LED
saving(%) color
ON
Active
Yes
No
Yes
No
Yes
Yes
No
No
< 100W
< 15W
< 15W
0%
85%
85%
92%
Green
Yellow
Yellow
Amber
Stand-by
Suspend
OFF
Blanked
Blanked
Blanked
<
8W
This m onitor is Energy Star com pliant and TCO'92 pow er
management compatible.
AS AN EN ERGY STAR PARTN ER, MAGN AVOX, H AS
DETERMINED THAT THIS PRODUCT MEETS THE ENERGY
STAR GUIDELINES FOR ENERGY EFFICIENCY.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
E
N
Specification*
(I) General
CRT
Screen size
Dot pitch
Phosphor
:
:
:
17" (43.2 cm) flat & square
0.28 mm
P22 or eq u iv a len t, m ed iu m sh or t
persistence
Screen treatment
:
Anti-glare, anti-static
Display area
Factory preset
Maximum usable
:
:
306 mm (H) x 230 mm (V)
323 mm (H) x 242 mm (V)
Scanning frequency
Horizontal (line)
Vertical (frame)
:
:
30-69 kHz (AutoScan)
50-120 Hz (AutoScan)
Input power
:
:
100-240 VAC, 50-60 Hz
Power consumption
100 Watt normal, 110 Watt maximum
Input signal
Video
Sync
:
:
0.7 Vpp, 75 Ohm inpedence
Separate sync. TTL level
Composite sync. TTL level
Pedestal
Tilt
Swivel
:
:
5° forward, 13° backward
90° leftward, 90° rightward
Physical
Unit dimension (WxHxD)
Net weight
:
:
420 x 424 x 452 (mm)
18.5 kg
Operating condition
Temperature
Humidity
:
:
0° C - 40° C
20% - 80%
Storage condition
Temperature
Humidity
:
:
-25° C - 70° C
10% - 95%
White Color Coordinates:
Red:
x= 0.625
y= 0.340
Blue: x= 0.150
y= 0.065
Green: x= 0.285
y= 0.605
* Because of a policy of continuous product improvement, the above specifications
are subjected to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
E
N
(II) Pin assignment:
1
6
11
5
10
15
The 15-pin D-sub connector (male) of the signal cable (IBM systems):
Pin No. Assignment
Pin No. Assignment
1
2
3
4
5
Red video input
9
10
11
12
13
14
15
No pin
Self-test
Ground
Serial data line (SDA)
H. Sync / H+V
V. Sync (VCLK for DDC)
Data clock line (SDA)
Green video input
Blue video input
Ground
Identical output
- Connected to pin 10
Red video ground
Green video ground
Blue video ground
6
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|