Magnavox Blu ray Player MBP5210 User Manual

Owner’s Manual

MBP5210

Blu-ray Disc™ / DVD Player with Built-in WiFi

Download from Www.Somanuals.com. All Manuals Search And Download.

11.NETWORK FEATURES........................................................37

17.NETWORK SERVICE DISCLAIMER..............................59

18.MAINTENANCE......................................................................60

19.TRADEMARK INFORMATION.......................................61

20.GLOSSARY..................................................................................63

21.ESPAÑOL.....................................................................................65

11.1 Before Using Network Features....................................... 37

11.2 Information on Network Services.................................. 37

12.LIST OF SETTINGS................................................................38

13.SETUPS..........................................................................................41

13.1 Network Connection............................................................. 41

13.2 fun-Link (HDMI CEC)............................................................. 47

13.3 HDMIVideo Resolution......................................................... 47

13.4 Parental............................................................................................ 48

13.5 Software Update........................................................................ 50

13.6 Initialize............................................................................................ 52

21.1 Mando a Distancia.................................................................... 65

21.2 Encontrar el Canal deVídeo en suTelevisor............. 67

21.3 Instalación Inicial......................................................................... 67

14.TROUBLESHOOTING.........................................................53

15.LANGUAGE CODE LIST....................................................57

16.SPECIFICATIONS....................................................................58

LIMITED WARRANTY..............................................back cover

EN-3

Download from Www.Somanuals.com. All Manuals Search And Download.

2. SAFETY INSTRUCTIONS

■ To Avoid the Hazards of Electrical Shock and Fire

• Do not handle the AC power cord with wet hands.

• Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

■ Location and Handling

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit

is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

• Depending on the environment, the temperature of this unit may increase slightly.This is not a malfunction.

• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.

■ Dew Condensation Warning

• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a

few hours until its inside gets dry.

- The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

■ Note about Recycling

• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

• Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations

concerning chemical wastes.

• For product recycling information, please visit - www.magnavox.com

Click on

■ Notice for Progressive Scan Output

• Consumers should note that not all high definition television sets are fully compatible with this product and may

cause artifacts to be displayed in the picture. In case of picture problems with 480 progressive scan output, it

is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions

regarding yourTV set compatibility with this 480p BD / DVD player, please contact our customer service center.

EN-4

Download from Www.Somanuals.com. All Manuals Search And Download.

3. SUPPLIED ACCESSORIES

• Remote Control (NB958UD)

• Batteries (AAA, 1.5V × 2)

• Audio / video cables

• SETUP MANUAL

MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai

Electric Co. Ltd. and Funai Corporation, Inc. under license from Philips Electronics North America.

downloaded or stored in any storage medium, in any form or for any purpose without the express prior written

consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content

herein without the obligation to notify any person or organization of such changes.

EN-5

Download from Www.Somanuals.com. All Manuals Search And Download.

4. FEATURES

4.1 Features

Blu-ray Disc™

You can enjoy Blu-ray Disc™ which is capable of storing five times more data than a conventional DVD.

BD-Java

With some Blu-ray™ discs which support Java applications, you can enjoy the interactive functions such as games or

interactive menus.

DVD upscaling for enhanced picture quality

Your current DVD will look even better than before thanks to video upscaling. Upscaling will increase the resolution

of standard definition DVD to high definition up to 1080p over an HDMI connection.The picture will be less jagged

and more realistic for a near high definition experience.

Enjoy your content on different kinds of media

Full backwards compatibility with DVD, CD and SD Memory Card ensures that you can continue to enjoy your

current audio-video collection. Additionally, you can enjoy AVCHD / MP3 / WMA / JPEG files.

Listen to rich multi-channel surround sound

Multi-channel surround sound, which realizes real-to-life sound and makes you feel that you are really there.

Easy and simple connection to your HDTV via HDMI

Connect this unit to your HDTV with one single HDMI (High-Definition Multimedia Interface) cable. It is recommended

to use a High Speed HDMI cable for better compatibility.The high definition video output signal will be transferred to

your HDTV without conversion to analog signals, so you will get excellent picture and sound quality, completely free from

noise.Thanks to other multiple outputs, you can also easily connect to your home theater system or amplifier.

fun-Link (HDMI CEC) (Consumer Electronics Control)

This unit supports fun-Link (HDMI CEC), which allows integrated system control over an HDMI cable and is part of

the HDMI standard.This function may not work properly on some devices.

PiP (BONUSVIEW™)

Some BD-videos have the PiP function which enables you to display the secondary video in the primary video.You can

call up the secondary video by pressing [MODE] whenever the scene contains the secondary video.

BD-Live™

BD-Live™ (BD-ROM version 2 Profile 2.0) that allows interactive functions to be used when this unit is connected

to the Internet in addition to the BONUSVIEW™ function.The various functions differ depending on the disc.

Pop menu

Some BD-videos have a pop menu which is a navigation menu that can be called up and be operated on theTV screen

without interrupting playback.You can call up the pop menu by pressing [POP MENU/MENU]. Contents in the pop menu

vary depending on the disc.

HDMI Deep Color

Deep Color reduces posterization (color banding) effect of the playback image.

Continued on next page.

EN-6

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI 1080p/24 output (Blu-ray Disc™ only)

This unit is equipped with the feature which can provide smooth movement during playback of film originated material

with the frame rate of 24 frames per second with progressive. (Available only when the display device is connected by an

HDMI cable.) Refer to “HDMIVideo Resolution” on page 47.

Playing back contents from an SD Memory Card

You can play back AVCHD / MP3 / WMA / JPEG files stored in an SD Memory Card. BD-ROM Profile 2.0 (BD-Live™)

and Profile 1.1 discs sometimes store picture-in-picture commentary, subtitles or other extras in the SD Memory Card

for use during playback with the BD-video.

Playing back AVCHD files

This unit supports playback of AVCHD format files (new format for high definition video camcorders) recorded on

disc / SD Memory Card.Your high definition personal archive is playable in HD quality.

x.v.Color

This unit supports playback of video contents on discs recorded with “x.v.Color” technology.To watch this video

content with the “x.v.Color” space, aTV or other display device supporting both video image reproduction using

“x.v.Color” standard and capability of manual switching of its color space setting is required. Please refer to the

owner’s manual of your display device for further information.

Enjoy contents stored on DLNA certified home media servers

This unit is a DLNA certified media player that can play video, music and photo files stored on DLNA certified

home media servers connected to your home network. (not warranted for wireless environment)

Netflix

With this unit, you can enjoy movies andTV episodes streamed instantly from Netflix via the Internet. In order to

use this feature, you must visit www.netflix.com/Magnavox on your PC and become a Netflix member. (This feature

is available only in the United States.)

VUDU

This unit supportsVUDU which is the leading HD on-demand video service.WithVUDU, you can also enjoy

various kinds of Internet applications. In order to use this feature, you must connect this unit to the Internet

www.vudu.com/product_overview.html . (This feature is available only in the United States.)

For additional information please visit www.vudu.com

EN-7

Download from Www.Somanuals.com. All Manuals Search And Download.

4.2 Product Info

“Product Info” screen provides information about this unit’s software version.You can also download the latest software

from the Magnavox website and update it yourself if it is newer than the version currently on your unit.The current

version of software on your unit can be seen on the “Product Info” screen.

To access “Product Info”, follow the procedure below.

1. Press [HOME].

2. Use [Î/ï/Í/Æ] to select “Settings”, then press [OK].

3. Use [Î/ï] to select “Others”, then press [OK].

4. Use [Î/ï] to select “Product Info”, then press [OK].

4.3 Symbols Used in this Owner’s Manual

To specify which media type each function is applicable to, we put the following symbols at the beginning of each

item to operate.

Symbol Description

Description refers to BD-video

Description refers to DVD-video

Description refers to audio CD / DTS-CD

Description refers to DVD-RW/-R and SD Memory Card with AVCHD files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with MP3 files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with Windows Media™

Audio files

Description refers to BD-RE/-R, DVD-RW/-R, CD-RW/-R and SD Memory Card with JPEG files

Description refers to video files in the DLNA home server

Description refers to music files in the DLNA home server

Description refers to photo files in the DLNA home server

If you do not find any of the symbols listed above under the function heading, the operation is applicable to all

media.

EN-8

Download from Www.Somanuals.com. All Manuals Search And Download.

5. FUNCTIONAL OVERVIEW

5.1 Front Panel

6 7

(*)The unit can also be turned on by pressing these buttons.

1. Disc tray

6. STANDBY/ON indicator

• Flashes while getting ready to start.

2. ﬂ OPEN/CLOSE button*

3. Infrared sensor window

4. Ê STOP button

• Dims and flickers when IR remote signal is received.

7. . STANDBY/ON button

8. SD card slot

5. Æ PLAY button*

D Note

• Due to new ENERGY STAR requirements, this unit will automatically turn on the screen saver after 5 minutes

of inactivity and enter standby mode after 25 minutes of inactivity.

5.2 Rear Panel

4 5

1. AC power cord

2. LAN terminal

3. HDMI OUT jack

4. AUDIO OUT jacks

5. VIDEO OUT jack

C Caution

• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage

to the unit.

• This unit does not have aTV RF modulator.

EN-9

Download from Www.Somanuals.com. All Manuals Search And Download.

5.3 Remote Control

(*)The unit can also be turned on by pressing these

buttons.

1. STANDBY/ON . button

Press to turn on the unit, or to switch the unit into

Standby mode. (To completely turn off the unit, you

must unplug the AC power cord.)

2. RED / GREEN / BLUE /YELLOW buttons

13*

Press to activate shortcut keys on some BD-video

functions.

When file list is shown, press to switch between

pages.

3. TOP MENU button

Blu-ray Disc™:

Press to display the top menu.

DVD:

Press to display the title menu.

4. Î/ï/Í/Æ buttons

Press to select items or settings.

5. HOME button

Press to display the home menu.

6. ¢ (reverse) button

During playback, press to fast reverse the playback.

7. Æ (play) button*

Press to start playback or resume playback.

8. H (skip) button

During playback, press once to return to the

beginning of the current title, chapter, track or file.

During playback, press twice to return to the

previous title, chapter, track or file.

During the JPEG playback, press to return to the

previous file.

9. Ê (stop) button

Press to stop playback.

10. Number buttons

Press to select a chapter during playback.

Press to enter numbers in the input field.

11. MODE button

During playback, press to display the play menu.

Continued on next page.

EN-10

Download from Www.Somanuals.com. All Manuals Search And Download.

12. NETFLIX button

Press to launch Netflix.

13. OPEN/CLOSE ﬂ button*

Press to open or close the disc tray.

14. POP MENU/MENU button

Blu-ray Disc™:

Press to display the pop menu.

DVD:

Press to display the disc menu.

15. OK button

Press to confirm or select menu items.

16. RETURN button

Press to return to the previously displayed menu or screen function.

17. ∫ (forward) button

During playback, press to fast forward the playback.

When playback is in pause, press to slow forward the playback.

18. G (skip) button

During playback, press to skip to the next chapter, track or file.

When playback is in pause mode, press to forward the playback picture by picture.

19. Δ (pause) button

Press to pause playback.

20. DISPLAY button

Press to display the on-screen display menu.

21. REPEAT button

Press to select repeat mode.

22. SUBTITLE button

Press to select subtitles on a disc.

23. AUDIO button

Press to select the audio channel (such as audio languages) on a disc.

24. VUDU button

Press to launchVUDU.

25. CLEAR button

Press to clear the information once entered.

D Note

• The STANDBY/ON indicator on the front panel dims and flickers when it receives the IR signal from the remote

control.

Continued on next page.

EN-11

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Installing the Batteries in the Remote Control

Install 2 AAA (1.5V) batteries matching the polarity indicated inside battery compartment of the remote control.

C Caution

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.

• Do not mix new and old batteries together.

• Do not use different kinds of batteries together. Although they may look similar, different batteries may have

different voltages.

• Make sure that the + and - ends of each battery match the indications in the battery compartment.

• Remove batteries from the battery compartment when the remote is not going to be used for a month or

more.

• When disposing of used batteries, please comply with governmental regulations or environmental public rules

that apply in your country or area.

• Do not recharge, short-circuit, heat, burn or disassemble batteries.

■ Using the Remote Control

Remote Control Usage Guidelines:

• Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor

window of the unit.

• Remote controls of different devices can interfere with each other. Avoid using a remote control of another

device which is located close to the unit.

• Replace the batteries when you notice a fall-off in the operating range of the remote control.

• The maximum operable ranges from the unit are as follows.

Line of sight

: approx. 23 feet (7 m)

Either side of the center : approx. 16 feet (5 m) within 30°

Above

Below

: approx. 16 feet (5 m) within 15°

: approx. 10 feet (3 m) within 30°

30˚

EN-12

Download from Www.Somanuals.com. All Manuals Search And Download.

5.4 Guide to On-Screen Display

■ Home Menu

When you turn on the unit, the home menu will appear automatically. Otherwise, press [HOME].

Disc

: Initiates playback of inserted disc, displays a list of tracks / files or the media filter menu

:To access the menu of network services

“Disc”

“NET APP”

: Displays a list of tracks / files on the inserted SD Memory Card or the media filter menu

:To access the home network server (DLNA)

:To access the setup menu

“SD Memory Card”

“Home Network”

“Settings”

:To setup network settings

“Network Setup”

■ Setup Menu

TV Aspect

Progressive Mode

Still Mode

: 16:9 Wide

: Auto

Video Out

Audio Out

Network

HDMI

Playback

Others

1. Category

: Displays options for the highlighted item on the left whenever available.

2. Menus / Options

■ Play Menu

During playback, press [MODE] to display the play menu.

e.g.) Blu-ray Disc™

Audio

Subtitle

Repeat

Black Level

Noise Reduction

EN-13

Download from Www.Somanuals.com. All Manuals Search And Download.

6. CONNECTIONS

6.1 HDMIVideo / Audio Connection

(Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.)

YourTV

HDMI IN

HDMI cable (not supplied)

No analog audio connection required.

(*1) 1080i : Outputs video data with a frame rate of 30 frames per second.

(*2) 1080p : Outputs video data with a frame rate of 60 frames per second.

(*3) 1080p/24 : Outputs video data with a frame rate of 24 frames per second.

• Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the

connector are matched.

• When connected to an HDCP incompatible display device, the picture will not be displayed properly.

• Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.

High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.

6.2 StandardVideo + Standard Audio Connection

(Supports only 480i resolution.)

YourTV

VIDEO IN

AUDIO IN

Video cable (supplied)

Audio cable (supplied)

• Connect this unit directly to theTV. If the audio / video cables are connected to aVCR then the pictures may be

distorted due to the copyright protection system.

EN-14

Download from Www.Somanuals.com. All Manuals Search And Download.

6.3 Connection to an Audio System

• When you change the connections, all devices should be turned off.

• When connecting the unit to an external audio system, refer to the User Manual for Setup / Configuration help.

■ 2-Channel Analog Audio Connection

Stereo system with

analog audio input jacks

AUDIO IN

Audio cable (supplied)

■ HDMI Audio Connection

AV receiver/amplifier with an HDMI input jack

HDMI cable

HDMI IN

(not supplied)

■ HDMI Audio Output

“Audio Output”

“Bitstream”

“LPCM”

“Off”

setting →

“BD Audio Mode”

“HD Audio Output” “Mix Audio Output” “HD Audio Output” “Mix Audio Output” Regardless

Which audio format can be output depends on the compatibility of the connected device.

setting →

Media

↓

Audio Source

↓

Dolby Digital

Dolby Digital Plus

DolbyTrueHD

DTS^®

Dolby Digital

Dolby Digital Plus

DolbyTrueHD

DTS^®

DTS-HD^®

Multi LPCM

Dolby Digital

DTS^®

Multi LPCM

2ch LPCM

Mute

Dolby Digital

Multi LPCM

BD-video

DTS-HD^®

DTS^®

Multi LPCM

LPCM

Dolby Digital

DVD-video DTS^®

LPCM

DTS^®

2ch LPCM

DTS^®

DTS-CD

AVCHD

Multi LPCM

2ch LPCM

Dolby Digital

LPCM

Dolby Digital

Multi LPCM

2ch LPCM

Audio CD LPCM

MP3

2ch LPCM

Windows

Media™

Audio

WMA

2ch LPCM

Mute

Continued on next page.

EN-15

Download from Www.Somanuals.com. All Manuals Search And Download.

“Audio Output”

“Bitstream”

“LPCM”

“Off”

setting →

“BD Audio Mode”

“HD Audio Output” “Mix Audio Output” “HD Audio Output” “Mix Audio Output” Regardless

Which audio format can be output depends on the compatibility of the connected device.

setting →

Media

↓

Audio Source

↓

Dolby Digital

MP2

Dolby Digital

2ch LPCM

Multi LPCM

2ch LPCM

Multi LPCM

2ch LPCM

Multi LPCM

2ch LPCM

Multi LPCM

2ch LPCM

Mute

DLNA

Video

LPCM

Multi LPCM

DLNA Music MP3 / WMA / LPCM 2ch LPCM

Dolby Digital Plus

WMA

Dolby Digital Plus

Netflix

VUDU

2ch LPCM

Dolby Digital Plus

MP3

Dolby Digital Plus

2ch LPCM

¹) Fully decoded.

²) Only the independent substream is decoded.

³) DolbyTrueHD stream is decoded.

⁴) Only the Dolby Digital substream is decoded.

⁵) Only the core substream is decoded.

D Note

• If the connected device is not compatible with the HDMI BITSTREAM, audio will be output as multi LPCM or

2-channel down-mixed LPCM depending on the capability of the connected device even if you select “Bitstream”

in “Audio Output” setting.

• If the connected device is not compatible with AAC, audio will be output as LPCM depending on the capability

of the connected device.

• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as

“HD Audio Output” even if the “BD Audio Mode” is set to “Mix Audio Output”.

6.4 Connection to the Network

By connecting this unit to the Internet, you can update the software via the Internet, play contents stored on DLNA

home media servers or access BD-Live™, Netflix andVUDU services.

- For more information about a software update, refer to “Network Update” on page 51.

- For more information about DLNA, refer to “Playing BackVideo / Music / Photo from DLNA Certified Home

Media Servers” on page 27.

- For more information about BD-Live™, refer to “Enjoying BD-Live™ Discs Using Internet” on page 31.

D Note

• Wired connection is recommended when using the following features. (Using the following features with a

wireless connection can be affected by other devices using radio frequencies.)

- Play contents from DLNA certified home media servers

-Video streaming services (Netflix /VUDU)

- Network update

Continued on next page.

EN-16

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Wired Connection

Broadband router or hub

Networking equipment

(modem,etc.)

WAN

LAN

LAN cable (not supplied)

Internet

C Caution

• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.

• Do not connect your PC directly to the LAN terminal of this unit.

D Note

• After you make a wired connection, set up necessary network settings. (For network setting of wired connection,

refer to “Wired” on page 41.)

• If your cable modem does not have router functions, connect a wired router.

• If your cable modem has router functions but there is no vacant port, add a hub.

• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.

■ Wireless Connection

Networking equipment

(modem,etc.)

LAN

WAN

Internet

Wireless router

LAN cable (not supplied)

D Note

• If using the wireless connection, refer to page 44 for “Wireless” setup to configure the network setting.

• For a wireless router, use a router that supports the following IEEE 802.11 b/g/n. (“n” is preferred type for a

stable operation of the wireless network.)

• Our player supports infrastructure mode when using a wireless router.This unit does not support ad-hoc mode.

• Other radio devices or obstacles may cause interference to the wireless network connection.

EN-17

Download from Www.Somanuals.com. All Manuals Search And Download.

7. BEFOREYOU START

7.1 Finding theViewingVideo Source Input onYourTV

After you have completed all of the connections to yourTV, review the steps below.

1. Press [STANDBY/ON .] to turn on the unit.

2. Turn on yourTV.

3. Please locate the input/video button onTV’s remote control. The button may vary on the brand and model of

theTV. Once you have located the button, press until you see “Please wait...” or the Initial Setup menu on the

screen.

Please Wait...

This is the correct viewing of the video source input.

• If theTV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.

• If a certain amount of time has passed since you turned on the unit, welcome screen only appears the first

time you turn on the unit.

7.2 Initial Setup

Please follow the instructions below to complete the initial setup.

1. While welcome screen is displayed, use [Î/ï] to select “Next”, then press [OK].

2. Language setup screen will appear. Use [Î/ï] to select your language, then press [OK].

Language

Please select your language for on-screen

display.

English

Español

Français

Back

3. “Quick Start Mode” screen will appear. Use [Î/ï] to select the desired mode, then press [OK].

4. “Automatically check for latest software” screen will appear. Use [Î/ï] to select the desired mode, then press

[OK].

5. Network setup screen will appear. Use [Î/ï] to select the desired mode, then press [OK].

• If you select “Wired”, refer to “Wired” on page 41 for further information.

• If you select “Wireless”, refer to “Wireless” on page 44 for further information.

EN-18

Download from Www.Somanuals.com. All Manuals Search And Download.

8. INFORMATION ON PLAYBACK

8.1 Information on Playback

■ Playable Discs and Files

Playable discs

Logos

Blu-ray Disc™

- BD-video

- BD-RE* (ver. 2.1)

(Recorded in BDMV format)

- BD-R* (ver. 1.1 / 1.2 / 1.3)

(Recorded in BDMV format)

(Disc that is not finalized may not be played

back.)

DVD-video

DVD-RW

(finalized video mode discs only)

DVD-R

(finalized video mode discs only)

CD-DA (audio CD)

CD-RW

CD-R

KODAK Picture CD

DTS-CD

* Due to the intentional progression of the Blu-ray Disc™ format by its standard setting authority, the company

cannot guarantee or warrant the playability of future extensions of the Blu-ray Disc™ format with this product.

Playable files

AVCHD

Media

DVD-RW/-R, SD Memory Card,

miniSD Memory Card, microSD Memory Card,

SDHC Memory Card, miniSDHC Memory Card,

microSDHC Memory Card

MP3

BD-RE/-R, DVD-RW/-R, CD-RW/-R,

SD Memory Card, miniSD Memory Card,

microSD Memory Card, SDHC Memory Card,

miniSDHC Memory Card, microSDHC Memory Card

Windows Media™ Audio

JPEG

Continued on next page.

EN-19

Download from Www.Somanuals.com. All Manuals Search And Download.

Readable cards

Playable files / data

SD Memory Card (8 MB - 2 GB)

miniSD Memory Card (16 MB - 2 GB)

microSD Memory Card (256 MB - 2 GB)

SDHC Memory Card (4 GB - 32 GB)

miniSDHC Memory Card (4 GB - 8 GB)

microSDHC Memory Card (4 GB - 16 GB)

AVCHD, MP3,WMA, JPEG, picture-in-picture

commentary, subtitles or other extras for

BD-ROM ver. 2 (Profile 2.0 / Profile 1.1)

■ Recommended Specifications

AVCHD

This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t) written to a DVD or copied to an SD

Memory Card.The DVD or SD Memory Card containing AVCHD files must have a proper file and folder structure

meeting AVCHD format specifications.

Please use AVCHD compliant device / software to burn or copy AVCHD files to DVD or SD Memory Card.

(Please refer to user manuals of the device / software for more information.)

MP3 / WMA

• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz

• Constant bit rate

: 112 kbps - 320 kbps (MP3),

48 kbps - 192 kbps (WMA)

JPEG

Resolution

• Upper limit

: 2,560 x 1,900 dots (sub sampling is 4:4:4)

5,120 x 3,840 dots (sub sampling is up to 4:2:2)

• Lower limit

: 32 x 32 dots

• Maximum file size of a picture : 12MB

■ Folder / File Number Limitations

Blu-ray Disc™, DVD and SD Memory Card

• 999 folders (groups) and 9,999 files.

• 255 folders (groups) and 999 tracks / files.

■ Caution / Note for SD Memory Cards

C Caution

• Use the write-protect switch on the SD / SDHC Memory Cards to ensure your data is securely protected when

playing back contents from the card.

• Do not try to open or modify the card.

• Do not touch the terminal surface with your fingers or any metals.

• Do not attach additional labels or stickers to cards.

• Do not remove the label from the SD Memory Cards.

EN-20

Continued on next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

D Note

• This unit supports SD Memory Card with FAT12 / FAT16 file system, and SDHC Memory Card with FAT32 file

system.

• This unit does not support NTFS file system.

• This unit may not read SD Memory Cards formatted on a computer. If that is the case, please reformat the SD

Memory Cards in this unit and try again when the SD Memory Card is reformatted all files will be erased.

• For miniSD Memory Card and microSD Memory Card, an adapter is necessary.

• Portions of this product are protected under copyright laws and are provided under license by ARIS / SOLANA

/ 4C.

• Please keep the SD Memory Cards in their cases when you are not using them.

■ Unplayable Discs and Files

The following discs will not be played back in this unit.

• CD-ROM software data discs

• CD-ROM

• CD-I (compact disc-interactive)

• DVD-RAM

• VSD (video single disc)

• DVD-audio

• video CD

• HD DVD

• SVCD

• SDXC Memory Card

• microSDXC Memory Card

• unfinalized disc

• BD-RE (ver.1.0)

• BD-RE (ver.2.1) (Recorded in BDAV format)

• BD-R (ver.1.1 / 1.2 / 1.3) (Recorded in BDAV format)

• Blu-ray Disc™ that contains AVCHD files

• Blu-ray Disc™ / DVD / CD / SD Memory Card contains DivX files

• Blu-ray Disc™ / DVD hybrid disc (played back as a BD-video only)

• DVD-RW/-R recorded in non compatible recording format

• Super Audio CD - Only the sound on the CD layer can be heard.The sound on the high-density Super Audio

CD layer cannot be heard.

• Playability of dual discs is not guaranteed.

• This unit cannot play back the disc contents protected by Windows Media™ Digital Rights Management (DRM).

Continued on next page.

EN-21

Download from Www.Somanuals.com. All Manuals Search And Download.

BD-video

■ Region Codes

This unit has been designed to play back BD-video with region “A” and DVD-video with region “1” or

“ALL”.You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the

symbols on your BD-video or DVD-video. If these region symbols do not appear on your BD-video or

DVD-video, you cannot play back the disc in this unit.The letter or number inside the globe refers to

region of the world. A BD-video or DVD-video labeled for a specific region can only be played back in the

unit with the same region code.

DVD-video

■ Hint for Disc Playback

The contents of a disc are generally divided into sections or folders (groups of titles / files) as shown below.

BD-video, DVD-video,AVCHD

title 1

title 2

chapter 1 chapter 2 chapter 1 chapter 2 chapter 3

Audio CD

track 3

track 1

file 1

track 2

track 4

track 5

file 5

MP3,Windows Media™ Audio, JPEG

folder (group) 1

folder (group) 2

file 2

file 3 file 4

■ Description for Icons

[

] : group (folder) icon

] : video file icon

] : music file icon

] : movie file icon

] : photo file icon

Photo

- “Folders” refers to a groups of files.

- “Tracks” refers to the contents recorded on the audio CD.

- “Files” refers to the contents on a disc which are recorded in AVCHD, MP3,WMA and JPEG (including KODAK

Picture CD) file format.

D Note

• Unrecognizable characters will be replaced with asterisks.

EN-22

Download from Www.Somanuals.com. All Manuals Search And Download.

8.2 Guide to File List

■ Video / Music File List

e.g.) MP3 mode

File List

TR - - - / 123

- - : - - : - -

DATA_xxxxx

DATA

Music 1

MP_1.mp3

MP_2.mp3

MP_3.MP3

MP_4.mp3

MP_5.MP3

MP_6.mp3

Page Up

Page Down

1. Elapsed playing time of the current track

2. Playback status symbol

3. Media type

4. Group (folder) / File list

5. Name of disc / SD Memory Card

6. Current track (file) number / Total number of tracks (files)

■ Picture File List

Thumbnail

TR - - - /123

06051_1140

DATA

Folder

Folder_002

Folder_001

Page Up

Page Down

1. Current file number / Total number of files

2. Playback status symbol

3. Media type

4. Group (folder) / File list (thumbnails)

How to Navigate through the Track / File List

• Use [Î/ï] to move the highlight up and down in the list.

• To access the files in a group (folder), select the desired group (folder), then press [OK].

• Press [Í] or [RETURN] to go back to the previous hierarchy.

• Press [RED] or [GREEN] to change the page list up or down.

• Press [YELLOW] to go back to the media mode screen.

• Press [HOME] to exit.

EN-23

Download from Www.Somanuals.com. All Manuals Search And Download.

8.3 How to Insert a Disc

1. Press [OPEN/CLOSE ﬂ] to open the disc tray.

2. Place the disc on the disc tray with its label side facing up.

Align the disc to the disc tray guide.

3. Press [OPEN/CLOSE ﬂ] to close the disc tray.

• It may take a while to load the disc.

EN-24

Download from Www.Somanuals.com. All Manuals Search And Download.

9. BASIC PLAYBACK

9.1 Playing Back a Disc

1. Insert a disc (refer to “How to Insert a Disc” on page 24).

• For Blu-ray Disc™ / DVD / audio CD or a disc containing only one type of file, playback will start automatically.

If not, press [Æ (play)].

• Some discs may show a title or a disc menu. In this case, refer to “Using theTitle / Disc / Pop Menu” on page 28.

2. Select the type of the file you want to play back, then press [OK].

Music

a. For “Music”, track / file list will be displayed. Select a group (folder) or track / file you want to play back then

press [Æ (play)] or [OK] to start playback.

• Refer to “Video / Music File List” on page 23 and “How to Navigate through theTrack / File List” on page 23.

b. For “Photo”, thumbnail screen will appear.

• Refer to “Picture File List” on page 23 and “How to Navigate through theTrack / File List” on page 23.

c. For “AVCHD”, playback will start automatically.

To skip to the next track / file

To skip to the previous track / file

To pause playback:

To return to the normal playback:

To stop playback

: Press [G (skip)]

: Press [H (skip)]

: Press [Δ (pause)]

: Press [Æ (play)]

: Press [Ê (stop)]

Playback will be in Resume-On-Stop mode.

■ Resume-On-Stop Mode

Blu-ray Disc™ / DVD / AVCHD

When you press [Æ (play)] next time, the playback will start from the point where it has been stopped.

Audio CD

Playback will start from the point where it is stopped next time you press [Æ (play)].

If you press [OK] instead of [Æ (play)], playback will start from the beginning of the track / file instead of

resuming from the stop point.

MP3 / WMA / JPEG / KODAK Picture CD

Playback will start from the beginning of the current file next time you press [Æ (play)] or [OK].

Continued on next page.

EN-25

Download from Www.Somanuals.com. All Manuals Search And Download.

D Note

• Playback will also stop and the home menu will appear when you press [HOME].

• For BD-Java application, the Resume-On-Stop may not be available.

• If you press [OK] instead of [Æ (play)], playback can be started from the beginning of the disc even if it was in

the Resume-On-Stop mode.

• Resume-On-Stop mode remains in effect even after power is turned off, but will be canceled once the disc is

ejected.

• With regard to the multi-border BD-RE/-R, additionally recorded sections cannot be recognized.

• With regard to the multi-border DVD-RW/-R, additionally recorded sections may not be recognized.

D Note for JPEG / KODAK Picture CD Playback

• Every press of [Í/Æ] will turn the image by 90 degrees when an image is displayed.

• During playback, press [TOP MENU] to display thumbnail screen.

• This unit conforms to ver.7.0 of KODAK Picture CD. For details of KODAK Picture CD, contact a shop that

provides developing service for Kodak Inc.

• Some unplayable folders or files may be listed due to the recording status.

• High-resolution JPEG files take longer to be displayed.

• Progressive JPEG files (JPEG files saved in progressive format) cannot be played back in this unit.

9.2 Playing Back an SD Memory Card

You can play back AVCHD / MP3 / WMA / JPEG files in an SD Memory Card.With the SD Memory Card, you can

also enjoy the following functions.

- Special additional contents for BD-ROM Profile 1 ver.1.1. (For more information about the special additional

contents, refer to the instruction book that came with the disc.)

- BD-Live™ function (BD-ROM ver. 2 Profile 2.0). (For more information about BD-Live™, refer to page 31.)

SD Memory Card

1. Insert an SD Memory Card.

2. Press [HOME].

3. Use [Î/ï/Í/Æ] to select “SD Memory Card”, then press [OK].

4. Follow step 2 in “Playing Back a Disc” on page 25.

To Remove the SD Memory Card

In stop mode, gently push in on the SD Memory Card so the card will slightly eject, then pull it out slowly.

Continued on next page.

EN-26

Download from Www.Somanuals.com. All Manuals Search And Download.

C Caution

• Do not remove the SD Memory Card or switch the unit to the standby mode while the contents of the card

are being accessed. It may result in malfunction or loss of the card’s data.

• Use the write-protect switch on the SD / SDHC Memory Cards to ensure your data is securely protected when

playing back contents from the card.

D Note

• The resume information will be cleared when;

-[Ê (stop)] is pressed while in the Resume-On-Stop mode.

-the SD Memory Card is removed.

-the unit is switched to standby mode.

• Do not delete the folders or files in the SD Memory Card with your computer.This unit may not read SD

Memory Cards formatted on a computer.

• If a folder or file name includes one of the following unrecognizable characters, the folder or file name may not

be displayed correctly.

. ,“ = + [ ] ; / \ : | ¥

- Unrecognizable characters :

9.3 Playing BackVideo / Music / Photo from DLNA Certified Home Media Servers

On this unit, you can play video, music and photo files stored on DLNA certified media servers connected to your

home network. In order to use this feature, you must connect this unit to your local network. (unwarranted for

wireless environment)

• For details, refer to the user manual of the DLNA certified device.

1. Follow steps 1 to 2 in “NETWORK FEATURES” on page 37.

2. Start DLNA home media servers in your home network.

3. Press [HOME].

4. Use [Î/ï/Í/Æ] to select “Home Network”, then press [OK].

• This unit will start loading the media server list.

• To cancel loading, press [Ê (stop)].

• To reload the media server list, press [YELLOW].

5. After loading, media server list will appear. Select a media server you want to access, then press [OK].

6. File list of the selected media server will appear. Select a file you want to play back, then press [Æ (play)] or

[OK] to start playback.

• If you select a folder, select a file in the folder and then press [Æ (play)] or [OK] to start playback.

Home Network

TR - - - - / 1234

- - : - - : - -

DATA_xxxxx

Photo_1

MP_1.mp3

MP_2.MP3

WMA_1.wma

WMA_2.WMA

JP_1.jpg

JP_2.JPG

Page Up

Page Down

Server List

• Refer to “Guide to File List” on page 23.

Continued on next page.

EN-27

Download from Www.Somanuals.com. All Manuals Search And Download.

To control the playback, use following buttons.

Button

Action

G (skip) For video files, playback will be step by step each time the button is pressed in pause mode.

During playback, press to fast reverse/forward the playback.

∫ (forward)

¢ (reverse)

Pause the playback.

Δ (pause)

Æ (play)

Return to the normal playback.

Stop the playback. (For video files, playback will be in Resume-On-Stop mode.)

Ê (stop)

Resume-On-Stop mode for video files

Playback will start from the point where it is stopped next time you press [Æ (play)]. If you press

[OK] instead of [Æ (play)] playback will start from the beginning of the file instead of resuming

from the last stop point.

TOP MENU Go to the root directory of the file list.

D Note

• For the media server list, maximum of 10 servers can be displayed.

• The system can recognize up to 9,999 files (including folders).

• The 10th and deeper hierarchies cannot be displayed.

• This unit supports the following formats. (Formats other than listed below cannot be recognized.)

-Video : MPEG 1, MPEG 2 PS, MPEG 2TS /TTS

- Music : LPCM, MP3,WMA

- Photo : JPEG (Images over 1024 x 768 pixel are not included in the warranty specification.)

• Unplayable files in the media server will not be displayed in the file list.

• For some files, playback is not available even if displayed in the file list.

• In order to play back the contents from media servers, the player and the media servers must be connected to

the same local area network.

• Compatibility and available playback function may differ depending on the media server.

• If you select a photo file in step 6 on page 27, the selected photo will display and go to the next photo within 10

seconds.

• For photo files, every press of [Í/Æ] will turn the image by 90 degrees when an image is displayed.

• The quality of the playback picture or sound depends on the speed/signal strength condition of your network.

• It may take a few moments while loading a file when the unit is going to a new folder/file location during

playback.

9.4 Using theTitle / Disc / Pop Menu

Some BD-videos, DVD-videos or AVCHD files may contain a title menu which describes the contents of the disc, or

a disc menu which guides you through the available functions in the disc.

With such discs, a title menu or a disc menu may appear automatically when you insert the disc. Otherwise, press

[TOP MENU] or [POP MENU/MENU] to call up the menu. Refer to the disc’s manual on how to navigate through

the menu.

D Note

• Menus vary among discs. Refer to the information accompanying the disc for details.

• [TOP MENU] or [POP MENU/MENU] may not work with some discs.

EN-28

Download from Www.Somanuals.com. All Manuals Search And Download.

10. SPECIAL PLAYBACK

10.1 Fast Forward / Fast Reverse

1. During playback, press [∫ (forward)] repeatedly for different fast forward speeds.

During playback, press [¢ (reverse)] repeatedly for different fast reverse speeds.

2. Press [Æ (play)] to return to normal playback.

D Note

• For Blu-ray Disc™, DVD and AVCHD, speed changes in 5 different levels.

• For audio CD, MP3,WMA, and video / audio files on DLNA home server’s, speed changes in 3 different levels.

• For some video / music files on a DLNA home server, fast forward / fast reverse may not function.

• For audio CD, MP3 and WMA, fast forward / fast reverse search between different files or tracks are not

available.

10.2 Slow Forward Playback

1. During playback, press [Δ (pause)].Then press [∫ (forward)].

Every time you press [∫ (forward)], the slow forward playback speed changes in 3 different levels.

2. Press [Æ (play)] to return to normal playback.

D Note

• Only slow forward is available.

• For some video files on a DLNA home server, slow forward may not function.

• Set “Still Mode” to “Field” in “Video Out” menu if pictures in the slow forward playback mode are blurred.

10.3 Step by Step Playback

1. In pause mode, press [G (skip)] repeatedly.

Every time you press [^G(skip)], playback will advance one step at a time.

2. Press [Æ (play)] or [Δ (pause)] to return to normal playback.

D Note

• Only step by step forward is available.

• Set “Still Mode” to “Field” in “Video Out” menu if pictures during step by step playback mode are blurred.

EN-29

Download from Www.Somanuals.com. All Manuals Search And Download.

10.4 Repeat Playback

Available repeat function varies depending on the discs.

1. During playback, press [REPEAT].

2. Use [Î/ï] to select the desired repeat mode.

Repeat Mode

Chapter Repeat

Available Media

The current chapter will be played back repeatedly.

Title Repeat

The current title will be played back repeatedly.

Track Repeat

The current track or file will be played back repeatedly.

All Repeat

All tracks in the media will be played back repeatedly.

Group Repeat

The current group (folder) will be played back repeatedly.

Random Repeat (Audio CD)

Randomly repeats tracks in playback.

Random Repeat (MP3 / WMA / JPEG)

Randomly repeats playback files in a folder.

3. Press [RETURN] to exit.

D Note

• The repeat setting will be canceled when you stop playback.

• When the repeat mode is set for an MP3 or WMA folder (file), the repeat setting will be canceled if you select

another MP3 or WMA folder (file) to play back.

• For some video / music / photo files on a DLNA home server, repeat playback may not function.

10.5 Slide Show

1. Follow steps 1 to 2 in “Playing Back a Disc” on page 25.

2. Open the folder which contains the desired JPEG files.

3. Use [Î/ï/Í/Æ] to select a desired file to be played back, then press [Æ (play)] or [OK].

• An image will be played back from the selected file and go to the next one in turn every 10 seconds.

4. Press [Ê (stop)] to stop playback.

To return to the first item

: Press [TOP MENU]

To return to the file played last

: Press [POP MENU/MENU]

D Note

• Large-size JPEG files take a few moments to be displayed.

EN-30

Download from Www.Somanuals.com. All Manuals Search And Download.

10.6 PiP (BONUSVIEW™) Setting

Some BD-videos have the PiP function which enables you to display the secondary video within the primary video.

PiP

1 / 8

Primary video

Secondary video

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select “PiP”, then press [OK].

• PiP information will appear.

3. Use [Î/ï] to select the secondary video you want to show.

• The secondary video will be displayed with the secondary audio.

• Use [Í/Æ] to switch between current setting and “Off”.

4. Press [RETURN] to exit.

• How to select the secondary audio output, refer to “Switching Audio Soundtrack” on page 34.

10.7 Enjoying BD-Live™ Discs Using Internet

You can enjoy BD-Live™ which enables you to use interactive features when the unit is connected to the Internet.

Examples of BD-Live™ features:

• Online access to additional content such as movie trailers, subtitles, BD-Java applications, etc.

• While downloading, special video data may be played back.

- Service and functions differ depending on the disc. Follow the instructions given by the disc when using the

BD-Live™ function.

- Insert an SD Memory Card of at least 1GB capacity before using BD-Live™ features on a Blu-ray Disc™.

(Make sure the write-protect switch on the SD Memory Card is not enabled.)

- Do not remove the SD Memory Card while using BD-Live™ features.

D Note

• You must connect the unit to the Internet and set up necessary settings in order to use BD-Live™.

• For the network connection, refer to “Connection to the Network” on page 16.

• For the network setup, refer to “Network Connection” on page 41.

• For certain discs, BD-Live™ setting in “Manual” Setup may need to be changed. (Refer to page 43.)

• Depending on your connection environment, it may take a few moments to connect to the Internet or the

Internet may not be connected. Refer to “TROUBLESHOOTING” on page 53.

• Some discs with BD-Live™ function require memory when playing back the content. If you cannot play back a

disc with BD-Live™ function, insert an SD Memory Card (1GB or more) which is formatted on this unit.

Continued on next page.

EN-31

Download from Www.Somanuals.com. All Manuals Search And Download.

• Note for AACS (Advanced Access Content System) Online

• The player or disc IDs may be sent to the content provider when playing back a disc with BD-Live™ function.

• If you save your viewing history on the server by using these IDs, you will be introduced to other similar movies.

• You can save game score histories.

10.8 Title / Chapter Search

■ Using [H (skip)] / [G (skip)]

1. During playback, press [G (skip)] to skip the current title or chapter and move to the next.

The title or chapter will move forward one at a time.

• If there is no chapter in one title, the current title may be skipped.

To go back to the beginning of the current title or chapter, press [H (skip)].

Press [ H (skip)] repeatedly to go to the previous title or chapter.The title or chapter may move backward

one at a time.

■ Using [MODE]

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select “Search”, then press [OK].

3. Use [Î/ï] to select “TT” or “CHP”, then press [OK].

e.g.) Blu-ray Disc™

001 / 999

4. Use [Î/ï/Í/Æ] to select the title / chapter number.

5. Press [OK].

Playback will start from the beginning of the title / chapter.

6. Press [RETURN] to exit.

■ Using [the Number buttons] (Direct Search)

Chapter Search

During playback, enter the chapter number you want to search using [the Number buttons]. Playback of the chapter will

start in a few seconds.

D Note

• As for the BD-video, how it performs will be strongly determined by the disc, and may not perform as described.

10.9 Track Search

1. During playback, press [^G(skip)] to skip the current track or file and move to the next.

The track / file will move forward one at a time.To go back to the beginning of the current track / file, press

[^H(skip)].

Press [^H(skip)] repeatedly to go to the previous track / file.The track / file will move backward one at a time.

EN-32

Download from Www.Somanuals.com. All Manuals Search And Download.

10.10 Time Search

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select “Search”, then press [OK].

4. Use [the Number buttons] or [Î/ï] to enter the time count you want to jump to.

e.g.) Entering 1 hour 45 minutes and 15 seconds.

5. Press [OK].

Playback will start from the desired time entered.

6. Press [RETURN] to exit.

D Note

• For some video files on DLNA home server, time search may not function.

10.11 Switching Subtitles

Some video materials may have subtitles in one or more languages. For commercially available discs, the supported

languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback.

1. During playback, press [SUBTITLE].

2. Use [Î/ï] to select “Primary”,“Secondary” or “Style”, then press [OK].

“Primary”

“Secondary”

“Style”

: Sets the subtitle for the primary video.

: Sets the subtitle for the secondary video.

: Sets style of the subtitle.

3. Use [Î/ï] to select your desired subtitle or style.

Subtitle

Primary

Secondary

Style

1 ENG / 255

Off

• Use [Í/Æ] to switch between current subtitle setting and “Off”.

4. Press [RETURN] to exit.

1. During playback, press [SUBTITLE].

2. Use [Î/ï] to select your desired subtitle.

Subtitle

1 ENG / 255

• Use [Í/Æ] to switch between current subtitle setting and “Off”.

3. Press [RETURN] to exit.

Continued on next page.

EN-33

Download from Www.Somanuals.com. All Manuals Search And Download.

D Note

• Some discs will only allow you to change the subtitles from the disc menu or pop menu. Press [TOP MENU] or

[POP MENU/MENU] to display the disc menu or pop menu.

• If the disc has no subtitle language or subtitle style,“Not Available” will be displayed on theTV screen.

• During playback of the secondary video, the primary subtitle setting is not available except when there is no

subtitle for the secondary video

• You can also change the subtitle setting from the play menu. Play menu can be called up by pressing [MODE].

10.12 Switching Audio Soundtrack

When playing back video material recorded with two or more soundtracks (these are often in different audio

languages or audio formats), you can switch them during playback. For Blu-ray Disc™, available audio varies

depending on “BD Audio Mode” setting.

1. During playback, press [AUDIO].

2. Use [Î/ï] to select “Primary” or “Secondary”, then press [OK].

“Primary”

: Sets the audio for the primary video.

“Secondary” : Sets the audio for the secondary video.

3. Use [Î/ï] to select your desired audio stream channel.

Audio

Primary

1 ENG Dolby D Multi-ch / 3

1 ENG DTS Multi-ch / 3

Secondary

[Decoding Format] : Dolby D

• For “Secondary”, use [Í/Æ] to switch between current audio setting and “Off”.

4. Press [RETURN] to exit.

1. During playback, press [AUDIO].

2. Use [Î/ï] to select your desired audio stream channel.

Multi-ch / 3

Audio

1 ENG Dolby D

[Decoding Format] : Dolby D

• For audio CD, you can select following options.

“Stereo”

“L-ch”

“R-ch”

: Both right and left channels are active (stereo).

: Only left channel is active.

: Only right channel is active.

3. Press [RETURN] to exit.

D Note

• The secondary audio will not be output when the secondary video is not displayed or when “BD Audio Mode” is set

to “HD Audio Output”. (For some Blu-ray™ discs, secondary audio will be output even when secondary video is off.)

• The sound mode cannot be changed during playback of discs not recorded in multiple audio mode.

• Some discs allow changing the audio language setting on the disc menu. (Operation varies depending on the

discs. Refer to the manual accompanying the disc.)

Continued on next page.

EN-34

Download from Www.Somanuals.com. All Manuals Search And Download.

• [AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing

audio setting on the disc menu).

• If the disc has no audio language,“Not Available” will be displayed on theTV screen.

• For DTS-CD (5.1 music disc), selecting audio streams or channels are not available.

• You can also change the audio setting from the play menu. Play menu can be called up by pressing [MODE].

10.13 Switching Camera Angles

Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles.You can

change the camera angle when

appears on theTV screen.

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select ”Angle”, then press [OK].

• The selected angle will be displayed on the display bar at the top of theTV screen.

3. Use [Î/ï] to select your desired angle.

4. Press [RETURN] to exit.

D Note

• If “Angle Icon” setting is set to “Off”,

will not appear on theTV screen.

10.14 Black Level

You can adjust the black level setting to make the black parts of the pictures as bright as you prefer.You can select

“On” or “Off”.

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select ”Black Level”, then press [OK].

3. Use [Î/ï] to select your desired setting.

e.g.) Blu-ray Disc™

Black Level

“On”

“Off”

: Makes the dark parts blacker with additional contrast and brightness.

: Shows the original picture as recorded.

4. Press [RETURN] to exit.

D Note

• The setting will remain the same even if the unit is switched to standby mode.

• “Black Level” is not effective under the following conditions.

- When the picture is output from HDMI OUT jack.

EN-35

Download from Www.Somanuals.com. All Manuals Search And Download.

10.15 Noise Reduction

Reduces the noise of the playback picture.

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select “Noise Reduction”, then press [OK].

3. Use [Î/ï] to select your desired setting.

e.g.) Blu-ray Disc™

Noise Reduction

Off

“On”

“Off”

:Activates noise reduction.

: Deactivates noise reduction.

4. Press [RETURN] to exit.

D Note

• The setting will remain the same even if the unit is switched to standby mode.

10.16 Virtual Surround

You can enjoy stereophonic virtual surround space through your existing 2 channel stereo system.

1. During playback, press [MODE] to display the play menu.

2. Use [Î/ï] to select ”Virtual Surround”, then press [OK].

3. Use [Î/ï] to select your desired setting.

e.g.) Blu-ray Disc™

Virtual Surround

Off

“On”

“Off”

:Activates surround effects.

: Deactivates surround effects.

4. Press [RETURN] to exit.

D Note

• Set the virtual surround setting to “Off” or lower the volume if the sound is distorted.

• For the virtual surround, audio signal will always be 2-channel LPCM.

EN-36

Download from Www.Somanuals.com. All Manuals Search And Download.

11. NETWORK FEATURES

11.1 Before Using Network Features

Please follow the instructions below before using network features.

1. Connect this unit to the Internet.

• Refer to “Connection to the Network” on page 16.

2. Set up the necessary network connection settings.

• Refer to “Network Connection” on page 41.

3. Press [VUDU] or [NETFLIX].

• For the first time only,“Network Service Disclaimer” screen will appear. After confirming the content, use

[Î/ï] to select “Agree”, then press [OK].

4. Press [HOME] to exit.

D Note

• You can also use network features from the home menu screen. Select “NET APP” in the home menu, then

select the desired features.

11.2 Information on Network Services

For detailed information on 3rd party Internet services, please visit the service provider’s website:

Netflix : http://www.netflix.com/HowItWorks

Support website : www.netflix.com/support

Support number : 1-866-716-0414

VUDU : http://www.vudu.com/product_overview.html

Support number : 1-888-554-VUDU (8838)

E-mail support : [email protected]

EN-37

Download from Www.Somanuals.com. All Manuals Search And Download.

12. LIST OF SETTINGS

In the setup menu, you can customize various kinds of settings as you prefer. Refer to the following instructions to

navigate through the setup menu.

1. Press [HOME] to access the home menu.

2. Use [Î/ï/Í/Æ] to select “Settings”, then press [OK].

3. Use [Î/ï] to select the desired Category, then press [OK].

4. Use [Î/ï] to move up and down the list to select Menus / Option.

5. To make a selection or to access options of an item, select the desired item, then press [OK].

• To go back to the previous screen, press [RETURN].

6. Press [HOME] to exit.

Refer to the following table for the types of settings you can customize.

The item highlighted in gray is the default setting.

Category

Menus / Options

Off

Playback

DVD Rating Level

8 [Adult]

7 [NC-17]

6 [R]

5 [PGR]

4 [PG-13]

3 [PG]

2 [G]

1 [Kid Safe]

Password Change

Angle Icon

Off

Others

Software Update

Disc

Network

SD Memory Card

Automatically check for latest On

software

Quick Start Mode*

Off

Product Info

Initialize

Reset Settings

Format SD Memory Card

(Unit) Erase Saved BD-ROM Data

(SD Memory Card) Erase Saved BD-ROM Data

Reset Network Settings

OSS

* When “Quick Start Mode” is set to “On”, power consumption during standby mode will increase.

EN-40

Download from Www.Somanuals.com. All Manuals Search And Download.

13. SETUPS

13.1 Network Connection

[HOME]

“Settings”

“Network”

“Network Connection”

→

Set up network connection settings in order to use BD-Live™, DLNA home media server, Netflix /VUDU or

network update function.

■ Connection Test

After you enable a network connection or change the network settings, always perform the connection test to

check if the connection is correctly made.

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].

2. Use [Î/ï] to select “Network”, then press [OK].

3. Use [Î/ï] to select “Network Connection”, then press [OK].

4. Use [Î/ï] to select “ConnectionTest”, then press [OK].

• Connection test will start automatically and the test result will appear right after the connection test finishes.

“Connecting...”

“Pass”

“Failed”

:The test is in progress.

: Network connection succeeds.

: Network connection failed.

5. If the connection test passes, press [OK].

D Note

• If the connection test passes, you are ready to use BD-Live™, DLNA home media server, Netflix /VUDU or network

update function, using the Internet without making any additional settings.

• If the connection test fails, you may need to check your router settings and make sure the physical connection

is secure. If you need the MAC address of this unit to complete your router settings you can view it on the

“Network Status” / “Wireless Status” screen (refer to page 46).

• When connecting this unit directly to a modem for the first time or connecting it to a modem which was

previously connected to any other network device (e.g. a router, PC, etc.), you may have to power cycle the

modem (unplug the modem’s and/or router’s AC plug from its AC outlet for 30 seconds and then plug it back

in), this may reset the settings in the modem.

If you have a telephone/Internet modem with your cable service then you may have to use its reset button or

remove the backup battery to reset this type of modem.

■ Wired

Select “Wired” if you made a wired connection and set it to “Auto”(wired) or “Manual”(wired), in accordance with

your network environment.

Auto (Wired)

Select “Auto” to set the network setting automatically.

1. Use [Î/ï/Í/Æ] to select “Network Setup” in the home menu, then press [OK].

2. Use [Î/ï] to select “Wired”, then press [OK].

3. Use [Î/ï] to select “Auto”, then press [OK]

• The unit will start the connection test automatically and the test result will appear right after the test finishes.

Continued on next page.

EN-41

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Select “End” to activate the network settings and set the network connection automatically.

Manual (Wired)

In the following cases, select “Manual”(wired) to set each setting as necessary.

- When connection test failed with the setting of “Auto”(wired).

- When instructed by your Internet service provider to make specific settings in accordance with your network

environment.

1. Follow steps 1 to 2 in “Auto (Wired)” on page 41.

2. Use [Î/ï] to select “Manual”, then press [OK]

3. Use [Î/ï] to select “IP Address”, then press [OK].

4. IP address setting screen will appear. Enter IP address with cursor buttons and number buttons.

Network Settings (Manual)

IP Address

Please input the IP Address.

Back Clear OK

Cancel

5/7

• Enter the IP address after checking the specifications of your router.

• If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and

assign a different number from those other devices.

5. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].

6. Select “Subnet Mask”,“Default Gateway”,“Primary DNS” and “Secondary DNS” in turn, and enter each address

number with cursor buttons and number buttons, then press [OK].

• Enter the DNS addresses provided by your Internet provider.

• If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable)

and assign the same DNS address.

Network Setting s (Manual)

Please enter your network settings.

IP Address

xxx. xxx. xxx. xxx

Subnet Mask

Default Gateway

Primary DNS

Secondary DNS

Cancel

5/7

7. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].

8. Use [Î/ï/Í/Æ] to select “Next”, then press [OK].

9. Use [Î/ï] to select “Yes” or “No” for proxy server, then press [OK].

• If you use proxy server, select “Yes” to go to the next step.

• If you do not use proxy server, select “No” to go to step 13.

Continued on next page.

EN-42

Download from Www.Somanuals.com. All Manuals Search And Download.

10. Proxy address setting screen will appear. Enter proxy address with cursor buttons, number buttons and color key.

Network Setting(Manual)

Please input the Proxy Address with software keyboard.

http://xxxxx.xx.xx

a/A/@

CLR

Done

Cancel

Clear

a/A/@

5/7

: Used to move through the menu.

[Î/ï/Í/Æ]

[the Number buttons] : Enter number (remote control).

[OK]

: Enter the selected setting.

[RED]*

: Confirm and set the enter network setting.

: Exit / Cancel network setting.

[GREEN]

[BLUE]

: Clear the enter number or letters.

[YELLOW]*

: Switch between different characters abc (lower case),ABC (uppercase),and @!?

(special characters).

* These buttons can be used in other network settings.

11. Press [RED] to go to the proxy port setting screen. Enter proxy port number with number buttons.

Network Settings (Manual)

Proxy Port

Please input the Proxy Port.

xxxxx

Cancel Clear OK

Cancel

5/7

12. Use [Î/ï/Í/Æ] to select “OK”, then press [OK].

13. Connection speed setting screen will appear. Use [Î/ï] to select the desired setting, then press [OK]. (The

default setting is “Auto”.)

14. BD-Live™ setting screen will appear. Use [Î/ï] to select the desired setting, then press [OK].

(The default setting is “Allow”.)

“Allow”

: Internet access is permitted for all BD-Live™ contents.

“Limited Allow” : Internet access is permitted only for BD-Live™ contents which have content owner

certificates. Internet access without the certificates is prohibited.

“Prohibit”

: Internet access is prohibited for all BD-Live™ contents.

15. Connection test confirmation screen will appear. Select “Yes” to start the connection test and the test result will

appear right after the connection test finishes.

16. Select “End” to complete the settings.

Continued on next page.

EN-43

Download from Www.Somanuals.com. All Manuals Search And Download.

D Note for “IP Address”,“Subnet Mask”,“Default Gateway”,“Primary DNS” and “Secondary DNS”

• The range of input numbers is between 0 and 255.

• If you enter a number larger than 255, the number will automatically be 255.

• When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)

• If you want to enter a 1 or 2-digit number in one cell, press [Æ] to move on to the next digit’s in the cell.

D Note for “Proxy Address” and “Proxy Port”

• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than

65535, it will be regarded as 65535.)

• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.

• Choose a connection speed in accordance with your network environment.

• When the settings are changed, the network connection may be disabled depending on the device.

■ Wireless

If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.

Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.

Auto Scan (Wireless)

1. Use [Î/ï/Í/Æ] to select “Network Setup” in the home menu, then press [OK].

2. Use [Î/ï] to select “Wireless”, then press [OK].

3. Use [Î/ï] to select “Auto Scan”, then press [OK]

• This unit will start searching for wireless networks automatically.

4. The result of wireless network searching will be displayed. Use [Î/ï] to select the appropriate wireless network

name (SSID), then press [OK].

• If you select an SSID with “ ”, please go to step 6.

Access Point Setting (Auto Scan)

Please select the access point.

Access 1

Access 2

Access 3

Retry

Cancel

3/7

5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA password of the selected wireless network

using cursor buttons, number buttons and color keys, then press [RED] to confirm the password.

• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the

router.

Access Point Setting(Auto Scan)

Please input the WEP/WPA Key with software keyboard.

XXXXXXX

a/A/@

CLR

Done

Cancel

Clear

a/A/@

3/7

Continued on next page.

EN-44

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Use [Î/ï] to select “Next”, then press [OK].

Access Point Setting (Auto Scan)

Please confirm the setting.

SSID

: Access 1

: XXXXX

Security

WEP/WPA Key : XXXXXXX

Retry

Cancel

3/7

7. Use [Î/ï] to select “Auto” or “Manual”, then press [OK].

• If you select “Auto”:

Follow step 4 in “Auto (Wired)” on page 41.

• If you select “Manual”:

Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.

D Note

• The internal wireless LAN supports following specifications.

- Wireless standards

- Frequency

: IEEE 802.11 b/g/n

: 2.4 GHz

- Security protocol

:WEP / WPA / WPA2

Manual (Wireless)

Set up the connection to the wireless router manually by entering the wireless network name (SSID).

In the following cases, select “Manual”(wireless) to set each setting as necessary.

- When connection test failed with the setting of “Auto Scan”(wireless).

1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.

2. Use [Î/ï] to select “Manual”, then press [OK]

3. Wireless router name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor

buttons, number buttons and color key, then press [RED].

4. Security mode select screen will appear. Select the desired security mode, then press [OK].

• If you select “None”, please go to step 6.

Network Settings (Manual)

IP Address

Please input the IP Address.

Back Clear OK

Cancel

5/7

5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network

using cursor buttons, number buttons and color key, then press [RED].

• If you do not know the WEP / WPA / WPA 2 key for your wireless network, please confirm the sticker on the

router.

6. Use [Î/ï] to select “Next”, then press [OK]

Continued on next page.

EN-45

Download from Www.Somanuals.com. All Manuals Search And Download.

7. Use [Î/ï] to select “Auto” or “Manual”, then press [OK]

• If you select “Auto”:

Follow step 4 in “Auto (Wired)” on page 41.

• If you select “Manual”:

Follow steps 3 to 12 and 14 to 16 in “Manual (Wired)” on page 42.

Easy Connect

You can set up the wireless connection quickly.

(“Easy Connect (WPS)” (Wi-Fi Protected Setup) is available only when your router supports it. For details, please

refer to the user manual of your wireless router.)

Push Button Method

Please confirm your wireless router has a PBC (Push Button Configuration) button.

1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.

2. Use [Î/ï] to select “Easy Connect (WPS)”, then press [OK]

3. Use [Î/ï] to select “Push Button Method”, then press [OK]

And push the PBC button on your wireless router.

• The unit will start the connection test automatically and the test result will appear right after the connection

test finishes.

Access Point Setting(Easy Connect)

Push Button Method

Please push the PBC(push button configuration) on

the wireless router and selected ‘Push Button Method’

button on screen.

PIN Code Method

Please input the PIN number into the wireless

router and select ‘PIN Code Method’ button on

screen.

PIN Code is

xxxxxxx

Cancel

2/7

4. Select “End” to complete the settings.

PIN Code Method

1. Follow steps 1 to 2 in “Auto Scan (Wireless)” on page 44.

2. Use [Î/ï] to select “Easy Connect (WPS)”, then press [OK]

3. Set up your wireless router with PIN code shown on theTV screen.

• For details about setting method of your wireless router, please refer to the user manual of the router.

4. Use [Î/ï] to select “PIN Code Method”, then press [OK]

5. This unit will start connecting to the wireless network automatically and the test result will appear right after the

connection test finishes.

6. Select “End” to complete the settings.

■ Network Status / Wireless Status

You can check the current status of network status and wireless status.

1. Follow steps 1 to 2 in “ConnectionTest” on page 41.

2. Use [Î/ï] to select “Network Status” or ”Wireless Status”, then press [OK]

• The current network settings or wireless router setting will be displayed.

3. Press [HOME] to exit.

Continued on next page.

EN-46

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Netflix ESN

You can view the ESN number which is a serial number used by Netflix to identify a device. Netflix customer

service might ask you for this number during troubleshooting.

1. Follow steps 1 to 2 in “ConnectionTest” on page 41.

2. Use [Î/ï] to select “Netflix ESN”, then press [OK]

3. Press [HOME] to exit.

13.2 fun-Link (HDMI CEC)

[HOME]

“Settings”

“HDMI”

“fun-Link (HDMI CEC)”

→

fun-Link (HDMI CEC) allows integrated system control over HDMI and is part of the HDMI standard.This function

may not work properly depending on the device connected to the unit.When “fun-Link (HDMI CEC)” setting is set

to “On” functions listed below will be available.

■ One Touch Play

fun-Link (HDMI CEC) operations are performed using remote control buttons.TheTV will automatically be turned

on and switched to the appropriate video source Input signal.

Buttons for one touch play:

- [Æ (play)], [^H(skip)], [G (skip)], [the Number buttons], [HOME] or [DISPLAY]

[TOP MENU] or [POP MENU / MENU] (when a disc is inserted in the unit)

■ One Touch Standby

When you press and hold [STANDBY/ON .] for 2 seconds, it will turn off the power to theTV first and then

turn off the power to this unit.

When the connected fun-Link (HDMI CEC) compatible display device is turned off first, this unit will be turned off

subsequently.

■ System Information

Get & Set Menu Language

The unit recognizes the OSD language set on theTV and automatically sets the same language as the player menu

language (OSD menu language) for this unit. Refer to the “Language” on page 39 for available languages.

• This feature is available only when “Auto” is selected in the “Language” section in the setup menu.

13.3 HDMIVideo Resolution

[HOME]

“Settings”

“HDMI”

“Video Resolution”

→

Set the resolution of the video signal being output from the HDMI OUT jack.

You can select the desired “Video Resolution” among the settings listed below:“Auto”,“480p”.

Continued on next page.

EN-47

Download from Www.Somanuals.com. All Manuals Search And Download.

Actual Output Resolution:

Source

1080i/60

480p/60

Setting in the

“Video Resolution”

480i/60

720p/60

720p/24

1080p/24

480p

Auto

The highest resolution supported by your display device will be automatically in effect.

Composite video output (VIDEO OUT) jack can only output 480i/60.

• For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available.

D Note

• The selected resolution must also be supported by your display device.

• If yourTV and the unit is connected by a DVI cable and if you select “Auto”,“480p” will be automatically in effect.

• Refer also to yourTV’s manual.

• When connected to an HDCP incompatible display device, the picture will not be displayed properly.

• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit

length) may be limited by the connected device.

• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors).

While connected to a device such as a projector, audio will not be output from the HDMI OUT jack.

• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible)

with an HDMI-DVI converter cable, the signals are output in digital RGB.

• HDMI video resolution does not work during the playback of a BD-video.

To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that

both the player and the display device (or an AV receiver / amplifier) support a copyright protection system called

HDCP (high-bandwidth digital content protection system). HDCP is copy protection technology that comprises

data encryption and authentication of the connected AV device.This unit supports HDCP. Please read the

operating instructions of your display device (or an AV receiver / amplifier) for more information.

13.4 Parental

Some BD-videos or DVD-videos feature parental lock levels. Playback will stop if the ratings exceed the levels you set,

it will require you to enter a password before the disc will play back.This feature prevents your children from viewing

inappropriate material.

1. Use [the Number buttons] to enter your 4-digit password.

For first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737).That number will

be used as the recover password. Record your password, in case you might forget it.

• If you forget the password, enter [4], [7], [3], [7].The password will be cleared and rating level will be set to “Off”.

• When you input the password, select “Clear” to clear the number, then re-enter the password.

■ BD Rating Level

[HOME]

“Settings”

“Playback”

“BD Rating Level”

→

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].

2. Use [Î/ï] to select “Playback”, then press [OK].

Continued on next page.

EN-48

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Use [Î/ï] to select “BD Rating Level”, then press [OK].

4. Use [the Number buttons] to enter your 4-digit password.

5. Use [Î/ï] to select your desired option, then press [OK].

“Off”

“Age Setting”

:To release the limitation.

:To set the age limitation.

• After selecting “Age Setting”, use [the Number buttons] to enter the age.

(e.g., For age 6, enter [6] + [OK].

For age 15, enter [1] + [5] + [OK].)

6. Press [HOME] to exit.

■ DVD Rating Level

[HOME]

“Settings”

“Playback”

“DVD Rating Level”

→

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK]

2. Use [Î/ï] to select “Playback”, then press [OK]

3. Use [Î/ï] to select “DVD Rating Level”, then press [OK]

4. Use [the Number buttons] to enter your 4-digit password.

5. Use [Î/ï] to select your desired level, then press [OK]

6. Press [HOME] to exit.

RATING EXPLANATION

Off

:Parental Control is inactive; all discs can be played back.

8 [Adult]

7 [NC-17]

6 [R]

:DVD software of any grades (adult / general / children) can be played back.

:No one under 17.

:Restricted; under 17.

5 [PGR]

4 [PG-13]

3 [PG]

2 [G]

:Parental guidance recommended.

:Unsuitable for children under 13.

:Parental guidance suggested.

:General audience.

1 [Kid Safe] :Suitable for children.

■ Password Change

[HOME]

“Settings”

“Playback”

“Password Change”

→

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK]

2. Use [Î/ï] to select “Playback”, then press [OK]

3. Use [Î/ï] to select “Password Change”, then press [OK]

4. Use [the Number buttons] to enter your current 4-digit password.

5. Use [the Number buttons] to enter a new 4-digit password.

6. Use [the Number buttons] to re-enter the same new 4-digit password.

7. Use [Í/Æ] to select “OK”, then press [OK].

8. Press [HOME] to exit.

Continued on next page.

EN-49

Download from Www.Somanuals.com. All Manuals Search And Download.

To cancel parental lock temporarily :

Some discs allow you to cancel parental lock temporarily.With these discs, the message below will appear when you

try to play them back.“Enter current password.”

Follow the instruction which appears on theTV screen to cancel parental lock.

13.5 Software Update

[HOME]

“Settings” “Others”

→

“Software Update”

→

This unit lets you update the software yourself using a software update disc, SD Memory Card or Internet.

The available discs are below:

- BD-RE/-R

- DVD-RW/-R

- CD-RW/-R

■ Disc / SD Memory Card Update

You can update the software by using a disc or SD Memory Card.

Prepare a disc or SD Memory Card for software update:

Access www.magnavox.com, and download the latest version software to a blank disc or SD Memory Card using a

PC by following the directions described on the website.

• Use a blank disc or SD Memory Card and download one software per disc and SD Memory Card. Write the

software to disc’s or card’s root directory.

• For more details on how to download the software, please refer to the website.

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].

2. Use [Î/ï] to select “Others”, then press [OK].

3. Use [Î/ï] to select “Software Update”, then press [OK].

4. Use [Î/ï] to select “Disc” or “SD Memory Card”, then press [OK].

5. Use [Í/Æ] to select “Yes”, then press [OK].

6. Insert the disc or SD Memory Card for software update.

7. After loading disc or SD Memory Card, confirmation message will appear. Select “Yes” and press [OK].

8. The unit will restart automatically, then software update will start.

• It may take a while to complete the updating.

9. After the update finishes, this unit will restart. Remove the disc or SD Memory Card from the unit.

C Caution

• Please do not unplug the AC power cord, eject the disc or SD Memory Card or press [STANDBY/ON .] to

turn the unit to standby mode while using the “Disc / SD Memory Card Update”.

D Note

• All settings will remain the same even if you update the software version.

• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.

Continued on next page.

EN-50

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Network Update

You can update the software by connecting the unit to the Internet.

1. Follow steps 1 to 3 in “Disc / SD Memory Card Update” on page 50.

2. Use [Î/ï] to select “Network”, then press [OK].

3. Use [Í/Æ] to select “Yes”, then press [OK].

• This unit will then start checking for the latest software version.

4. Confirmation message will appear. Select “Yes”, then press [OK].

5. The unit will restart automatically, then software update will start.

• The unit will start downloading the latest software version.

6. When the download completes, confirmation message will appear. Press [OK].

• The unit will start updating the software version.

• It may take a while to complete the updating.

7. After updating finishes, this unit will restart automatically.

C Caution

• Please do not unplug the AC power cord, LAN cable, wireless modem / router or press [STANDBY/ON .] to

turn the unit to standby mode while using the “Network Update”.

D Note

• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary

settings.

• For the network connection, refer to “Connection to the Network” on page 16.

• For the network setup, refer to “Network Connection” on page 41.

• All settings will remain the same even if you update the software version.

• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.

EN-51

Download from Www.Somanuals.com. All Manuals Search And Download.

13.6 Initialize

[HOME]

“Settings”

“Others”

“Initialize”

→

Menus to reset player settings, format SD Memory Card, local storage and clear network settings.

1. Use [Î/ï/Í/Æ] to select “Settings” in the home menu, then press [OK].

2. Use [Î/ï] to select “Others”, then press [OK].

3. Use [Î/ï] to select “Initialize”, then press [OK].

4. Use [Î/ï] to select the desired setting, then press [OK].

“Reset Settings”:

All the settings except for the parental and network settings will be reset to default.

“Format SD Memory Card” (Available only when an SD Memory Card is inserted):

Initialize the SD Memory Card.

“(Unit) Erase Saved BD-ROM Data”:

Clears the data saved for the BD-ROM contents, such as BD-ROM game scores, on this player.

“(SD Memory Card) Erase Saved BD-ROM Data” (Available only when an SD Memory Card is inserted.):

Clears the supplemental data for the BD-ROM playback, such as subtitle data, from the SD Memory Card.

“Reset Network Settings”:

Resets the network setting to the default.

5. Use [Í/Æ] to select “Yes”, then press [OK].

6. Confirmation message will appear. Press [OK] to complete the setting.

7. Press [HOME] to exit.

C Caution

• Do not remove the SD Memory Card while executing the “Format SD Memory Card” or “(SD Memory Card)

Erase Saved BD-ROM Data”. It will damage the card.

D Note

• “Format SD Memory Card” or “(SD Memory Card) Erase Saved BD-ROM Data” is not available when a Blu-ray

Disc™ is in the unit.

EN-52

Download from Www.Somanuals.com. All Manuals Search And Download.

14. TROUBLESHOOTING

Problem

Tip

No power.

Check the power cord, if it is properly connected.

Try another power outlet.

Unplug the power cord, and wait for about 5-10 seconds. Plug it back in and

attempt to power on the unit.

No sound or picture.

Make sure both theTV and Blu-ray Disc™ player are turned on.

Confirm the connections to theTV are connected properly as shown in the

connection page.

Check whether the connectedTV or other device supported HDCP. (This

unit will not output a video signal unless the other device supports HDCP.)

If the player is set on a high resolution output, that is not supported by the

TV, the picture may not appear. Press and hold [ÆÆPLAY] on the front panel

for 5 seconds to change back to default output.

No reaction to the remote control. Confirm that the player’s power cord is plugged into a power outlet.

Check the batteries, and make sure they are inserted properly by + or - symbols.

Aim the remote at the unit’s remote receiver.Then press any arrow key and

confirm the STANDBY/ON indicator dims and blinks when a remote button

is pushed.This confirms that unit is receiving the remote IR signal.

No audio / video signal on the

display device via HDMI cable.

If the unit is connected to a non certified HDMI device, the audio / video

signal will not output on that device.

Make sure the display device is on the correct input / video channel.

Perform the HDMI hotplug: Disconnecting the HDMI cable from the display

device, turn on both devices, and replug the HDMI cable back in.

Check with theTV manufacturer, if there are any software updates available

for theTV.

Check if the HDMI cable is a certified version.

No high-definition video signal on

theTV screen.

Does the disc contain high-definition video? High-definition video is not

available when the disc does not contain it.

Does theTV support high-definition video? High-definition video is not

available when theTV does not support it.

No audio signal from surround

system of the audio system.

Make sure the audio system is turned on.

Check the input mode on the audio system if it is on the correct channel.

Check if the surround system is compatible with either Bitstream or LPCM. If

not sure please check the user manual or contact the surround manufacturer.

Once confirmed check the setting in the step menu of the unit.

Increase the volume level of the surround system.

Distorted picture.

Sometimes a small amount of picture distortion may appear.This is not a

malfunction.

Connect this unit directly to theTV. If the audio / video cables are connected

to aVCR, pictures may be distorted due to theVCR copyright protection

system.

Completely distorted picture or

black / white picture with Blu-ray

Disc™ / DVD.

Make sure the disc is compatible with this unit.

Continued on next page.

EN-53

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Tip

No sound or distorted sound.

Adjust the volume.

Check if speakers are connected correctly.

Check the HDMI connections.

Make sure the HDMI cable is not plugged into the HDMI-DVITV connector

which does not allow audio to be received by theTV set.

Check the settings in “Audio Out” menu.

Picture freezes momentarily during Check the disc for fingerprints / scratches and clean with a soft cloth wiping

disc playback.

from center to outer edge.

Cannot play back a disc.

Make sure that the product supports the disc.

Check the region code of the disc.This unit supports the following region codes.

-Blu-ray Disc™ :“A”

-DVD :“ALL” or “1”

Clean the disc.

SD Memory Card cannot be read. The format of the card is not accepted by this unit or the card is not compatible.

Cannot play back JPEG files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.

Cannot play back MP3 files from a Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.

disc.

Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.

Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.

Cannot play back WMA files from a disc. Make sure that the sample rate of the WMA files is 44.1 kHz or 48 kHz.

No return to start-up screen when Soft reset this unit by turning it off for 30 seconds, then on again.

disc is removed.

To completely reset the unit, press and hold [. STANDBY/ON] on the

front panel for 10 seconds to shut down the unit or unplug the AC cord

from the AC outlet for 5-10 seconds.

The unit does not respond to the

remote control.

Aim the remote control directly at infrared sensor window on the front

panel. (Refer to page 12)

Reduce the distance to infrared sensor window.

Check the +/– polarity of the batteries and replace both batteries in the

remote control if required.

Go to “IR Signal Check” on page 60.

The current operation is not possible.

in the upper right hand corner

of theTV screen.

Buttons do not work or the unit

stops responding.

To soft reset the unit, press and hold [. STANDBY/ON] on the front

panel for 10 seconds to shut down the unit or to hard reset the unit by

unplugging the AC cord from the AC outlet for 5-10 seconds.

The unit does not respond to some Operations may not be permitted by the disc. Refer to the instructions for

operating commands during playback. the disc.

The unit cannot read Blu-ray Disc™ Condensation? (Let sit 1 or 2 hours)

/ DVD/ CD.

Check if the disc is compatible with this unit. (Refer to page 19.)

Wipe dirt off the disc from the center to the outside or replace the disc.

Refer to “Cleaning Discs” on page 60.

Scene shooting angle does not

switch.

Playback does not start when the

title is selected.

The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain

multiple angles. In some cases multiple angles are only recorded for specific scenes.

Check the settings in “Parental” menu.

The password for rating level has

been forgotten.

Enter the default password “4737”, then your forgotten password will be

cleared.Then to change password go to “Password Change” on page 49.

Continued on next page.

EN-54

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Tip

Cannot find a JPEG file.

Make sure that the selected group (folder) does not contain more than 9,999

files for Blu-ray Disc™ / DVD / SD Memory Card, and 999 files for CD.

Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.

Cannot find an MP3 and WMA file. Make sure that the selected folder does not contain more than 9,999 files

for Blu-ray Disc™ / DVD / SD Memory Card, and 999 files for CD.

Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or

.WMA for Windows Media™ Audio.

Error message appears when I

select “Auto” in the “Language”.

Make sure that the unit is connected to a MAGNAVOX brand fun-Link

(HDMI CEC)TV and the “fun-Link (HDMI CEC)” is set to “On”.

This error message may appear when yourTV’s OSD language is not

supported by this unit.

Cannot play back AVCHD file.

Cannot connect to the network.

This unit cannot play back stand-alone AVCHD files (*.m2ts, *.mts or *.m2t)

written to a DVD or copied to an SD Memory Card.The DVD or SD

Memory Card containing AVCHD files must have a proper file and folder

structure meeting AVCHD format specifications.

Please use AVCHD compliant device / software to burn or copy AVCHD

files to DVD or SD Memory Card. (Please refer to user manuals of the

device / software for more information.)

Check to see if there is power on the modem / router.

Confirm, if the Internet light is showing activity (light blinking) on the modem

/ router.

Check network settings on the unit.

Power cycle the modem’s and/or router’s AC plug from its AC outlet for 30

seconds and then plug it back in, then try reconnecting cords. If you have

a telephone/Internet modem with your cable service then you may have

to use its reset button or remove the backup battery to reset this type of

modem. Now wait for the lights to show activity and try reconnecting.

Check the cables connected the router.

Turn on the DHCP function on the router.

Cannot use the wireless connection. Once you have activated the wireless connection please wait 30 seconds for the

connection to be established after turning on the unit, before trying to access network

features such as BD-Live™, DLNA home network server, Netflix andVUDU.

Cannot connect to the network while Check the content of your Internet service contract to see if your Internet

my PC is connected to the network. Service Provider prevents multiple terminals connecting at the same time.

The capacity of the SD Memory

Card decreased.

Data may be written to the SD Memory Card when a BD-video that

supports the virtual package is used and an SD Memory Card is in the slot.

MPEG-2 video and audio on the SD MPEG-2 is non-compliant on this unit.

Memory Card cannot be played back.

The contents of the card cannot be The card is not compatible or the contents on the card may be damaged.

read.

Turn off and then turn the unit on again.

To soft reset the unit, press and hold [. STANDBY/ON] on the front

panel for 10 seconds to shut down the unit or to hard reset the unit by

unplugging the AC cord from the AC outlet for 5-10 seconds.

Cannot use the BD-Live™ function Insert an SD Memory Card before inserting the disc.

or download of data does not

perform properly.

Insert an SD Memory Card with enough capacity (1GB or more).

Check if an SD Memory Card is correctly inserted.

Make sure the write-protect switch on the SD Memory Card is not enabled.

Continued on next page.

EN-55

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Tip

Cannot play back BD-video

(BD-ROM Profile 2.0).

Insert an SD Memory Card (1GB or more) which is formatted on this unit. Some

discs with BD-Live™ function require memory when playing back the content.

Do not remove the card during playback.

Make sure the write-protect switch on the SD Memory Card is not enabled.

Folder or files stored on DLNA home Check the setting on your home media server. (Refer to the user manual of

media server are not displayed in the the home media server.)

file list or cannot be played back.

Check the network connection and settings.

Cannot use Netflix feature.

Netflix is available only in the United States.

Check if the network connection is properly made.

Visit netflix.com/magnavox on your PC and become a Netflix member.

Cannot add movies orTV episodes Visit netflix.com on your PC.

to the instant Queue.

You may add from the player or visit netflix.com and login to your account by web.

The picture quality does not change during playback.

Even though the speed of the

Internet connection improves during

playback, the picture quality of Netflix

streaming movie does not improve.

The picture quality differs depending on the speed of Internet connection at

the time the streaming video is loading.

The picture quality of streaming

movie (Netflix) is poor.

Check the speed of your Internet connection.

Contact your Internet service provider.

(You may need to improve the broadband speed.)

Streaming movie (Netflix) often stops Contact your Internet service provider.

or starts buffering during playback.

Cannot use theVUDU service.

(You may need to improve the broadband speed.)

Check if the network connection is properly made.

VUDU is available only in the United States.

Cannot rent or buy movies /TV

shows onVUDU.

You need to activate theVUDU account.

Log into your account at http://my.vudu.com and check your payment information.

The picture quality ofVUDU movie Check the speed of your Internet connection.You need speeds of at least 9

is poor. Mbps to this player for high quality uninterrupted playback.

VUDU movie often stops or starts Check your Internet speed.The following are the required connection

buffering during playback.

speeds for picture quality for uninterrupted streaming.

SD quality (1 Mbps - 2 Mbps), HD quality (2.25 Mbps - 4.5 Mbps), HDX

quality (4.5 Mbps - 9Mbps)

Please confirm your Internet environment on www.vudu.com

Cannot load a Blu-ray Disc™ (stuck Unplug unit from AC outlet for 20 seconds. Plug unit back in and press the

in “Loading…” mode) cannot open [ﬂ OPEN/CLOSE] on the unit to eject the disc.

the disc tray to eject the disc.

The software update screen

appears after turning on the unit.

Please complete the software update.

When the software update has failed, the software update screen will keep

appearing after turning the unit on.

If the software update continues failing, please try it by using a blank SD

Memory Card with the update software installed to it’s root directory.

Buffering and/or network errors occur Please stop Netflix/VUDU and perform the Network ConnectionTest in

while using Netflix orVUDU service “Settings”. If no problems are found, unstable network speed may be the

under a wireless network environment. cause. Please contact your Internet service provider.

D Note

• Do not attempt to repair the Blu-ray Disc™ Player yourself.This may cause severe injury, irreparable damage to

your Blu-ray Disc™ Player and void your warranty.

• Please have available your Blu-ray Disc™ Player model and serial number before contacting us.These numbers

are available on the cabinet, as well as on the packaging.

EN-56

Download from Www.Somanuals.com. All Manuals Search And Download.

15. LANGUAGE CODE LIST

Language

A-B

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Code

Language

French [FRE]

Frisian

Code

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

Language

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Code

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

Language

Siswat

Slovak [SLO]

Slovenian

Somali

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE] 6568

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Code

6565

6557

6558

6561

5165

6567

6569

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian [NOR] 6061

O-R

Occitan

Oriya

Oromo (Afan)

Panjabi

Pashto;Pushto

Persian

Polish [POL]

Portuguese[POR] 6266

Quechua 6367

Rhaeto-Romance 6459

Romanian [RUM] 6461

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Basque

Hungarian [HUN] 5467

I-K

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian [BUL] 4853

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

6149

6164

6159

6247

6265

5247

6258

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [GLE]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

L-N

Laothian

Latin

Latvian;Lettish

Lingala

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

5971

4851

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

6467

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

5861

5847

5868

5860

5866

F-H

Faroese

Fiji

5261

5256

5255

Sindhi

Singhalese

Finnish [FIN]

Lithuanian

D Note

• If you choose a language that has a 3-letter-language code (written in bracket), the code will be displayed every

time you change the subtitle language setting on page 33 or audio language setting on page 34. If you choose any

other languages,“---” will be displayed instead.

EN-57

Download from Www.Somanuals.com. All Manuals Search And Download.

16. SPECIFICATIONS

General

Signal system

NTSC Color

Power requirements

Power consumption

Dimensions (width x height x depth)

Weight

120V AC, 60 Hz

12 W (standby: 0.5 W)

14.2 x 2.0 x 8.5 inches (360 x 50 x 214.5 mm)

3.71 lbs. (1.68 kg)

Operating temperature

Operating humidity

41°F (5°C) to 104°F (40°C)

Less than 80 % (no condensation)

Connection Specifics

SD card slot (slot x 1)

Audio output (Analog) (RCA jack x 2)

Video output (RCA jack x 1)

HDMI output (HDMI jack x 1)

LAN

L/R: 2Vrms (output impedance: more than 1kΩ)

1Vp-p (75Ω)

Digital video: 480p, 720p, 1080i, 1080p, 1080p24 / Digital audio

10BASE-T / 100BASE-TX

Wireless LAN (Internal)

IEEE 802.11 b/g/n

D Note

• The specifications and design of this product are subject to change without notice.

EN-58

Download from Www.Somanuals.com. All Manuals Search And Download.

17. NETWORK SERVICE DISCLAIMER

Content and services made available through this product are transmitted by third parties by means of networks and

transmission facilities over which Company has no control and third party services may be terminated or interrupted at

any time, and Company makes no representation or warranty that any content or service will remain available for any

period of time.Without limiting the generality of this disclaimer, Company expressly disclaims any responsibility for any

interruption or suspension of any content or service made available through this product. Company is not responsible

for customer service related to the content and services.Any question or request for service relating to the content or

services should be made directly to the respective content and service providers.

THIRD PARTY CONTENT AND SERVICES MADE AVAILABLETHROUGHTHIS PRODUCT ARE PROVIDED

“AS IS.” COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, FOR ANY PURPOSE

WHATSOEVER. COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED INCLUDING

WITHOUT LIMITATION,WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ACCURACY,VALIDITY,TIMELINESS, LEGALITY, SUITABILITY, OR QUALITY OF ANY CONTENT OR SERVICE

MADE AVAILABLETHROUGHTHIS PRODUCT.

IN NO EVENT SHALL COMPANY BE LIABLE FOR,ANY DAMAGES,WHETHER ARISING IN CONTRACT

ORTORT, INCLUDING WITHOUT LIMITATION,ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES, LOST PROFITS,ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES

ARISING OUT OF, OR IN CONNECTION WITH,ANY CONTENT (OR ANY INFORMATION CONTAINED

THEREIN) OR SERVICE PROVIDEDTOTHE USER OR ANYTHIRD PARTY, EVEN IF ADVISED OFTHE POSSIBILITY

OF SUCH DAMAGES.

All content and services accessible through this product belong to third parties and are protected by copyright, patent,

trademark and/or other intellectual property rights. Such content and services are provided solely for the User’s

personal noncommercial use. User may not use any content or services in a manner that has not been authorized by

the content owner or service provider.Without limiting the foregoing, unless expressly authorized by the applicable

content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create

derivative works, exploit, or distribute in any manner or medium any content or services made available through this

product.

EN-59

Download from Www.Somanuals.com. All Manuals Search And Download.

18. MAINTENANCE

■ Servicing

• Please refer to relevant topics on “TROUBLESHOOTING” on page 53 before returning the product.

• If this unit becomes inoperative, do not try to correct the problem by yourself.There are no user-serviceable

parts inside. Eject the disc (if possible), remove the SD Memory Card, place the unit into the standby mode,

unplug the power plug, and please contact: 1-800-605-8610 or visit : www.magnavox.com/support

■ Cleaning the Cabinet

• Wipe the front panel and other exterior surfaces of the unit with a soft cloth.

• Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit.

Such chemicals may discolor the surface or damage the unit.

■ Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center to outside. Do not wipe

in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents

or antistatic spray intended for analog records.

■ Cleaning the Disc Lens

• If this unit still does not perform properly although you refer to the relevant sections and to

“TROUBLESHOOTING” in this owner’s manual, the laser optical pickup unit may be dirty. Consult your dealer or

an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

■ Disc Handling

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

• Note that discs with special shapes (heart-shaped discs, octagonal discs, etc.) cannot be played back on this unit.

Do not attempt to play such discs, as they may damage the unit.

■ IR Signal Check

• If the remote control is not working properly, you can use the unit or a digital camera (including a cellular phone

with built-in camera) to see if it is sending out an infrared signal. See next.

Check if IR signal is received by unit

Turn on the unit to ensure the STANDBY/ON indicator is on. Press any button, except [STANDBY/ON .], on

the remote pointing it at the center of the unit. If the indicator dims and flickers then the IR remote’s signal is

being received by the unit. If no dim flickering light, then check IR signal from remote next.

With a digital camera (including built-in cell phone cameras):

Point a digital camera towards the remote control. Push any button on the remote control and look

through the digital camera. If the infrared light appears through the camera, the remote control is

working.

EN-60

Download from Www.Somanuals.com. All Manuals Search And Download.

19. TRADEMARK INFORMATION

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616;

6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents

issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered

trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

“x.v.Color” and “x.v.Color” logo are trademarks of Sony Corporation.

Java and all Java based trademarks and logos are trademarks or registered trademarks of

Oracle and/or its affiliates.

VUDU™ is a trademark ofVUDU, Inc.

Netflix and the Netflix logo are trademarks or registered trademarks of Netflix, Inc.

DLNA^®, the DLNA Logo and DLNA CERTIFIED^®are trademarks, service marks, or

certification marks of the Digital Living Network Alliance.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

Windows Media and the Windows logo are trademarks or registered trademarks of

Microsoft Corporation in the United States and/or other countries.

Kodak and KODAK Picture CD Compatible are trademarks of Kodak used under license.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony

Corporation.

Continued on next page.

EN-61

Download from Www.Somanuals.com. All Manuals Search And Download.

“Blu-ray Disc™”,“Blu-ray™” and “Blu-ray Disc™” logo are trademarks of the Blu-ray Disc

Association.

is a trademark of DVD Format/Logo Licensing Corporation.

“BD-Live™” and “BD-Live™” logo are trademarks of the Blu-ray Disc Association.

“BONUSVIEW™” and “BONUSVIEW™” logo are trademarks of the Blu-ray Disc

Association.

EN-62

Download from Www.Somanuals.com. All Manuals Search And Download.

To request additional information about Cinavia by mail,

send a postcard with your mailing address to: Cinavia

Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

This product incorporates proprietary technology under

license fromVerance Corporation and is protected by

U.S. Patent 7,369,677 and other U.S. and worldwide

patents issued and pending as well as copyright

and trade secret protection for certain aspects of

such technology. Cinavia is a trademark ofVerance

disassembly is prohibited.

20. GLOSSARY

AAC

Advanced Audio Coding (AAC) is a lossy compression

and encoding scheme for digital audio. Audio files that

have been encoded with AAC generally achieves better

sound quality than MP3 at similar bit rates.

AACS

Advanced Access Content System (AACS) is the

content protection scheme used with Blu-ray™ discs.

Analog Audio

An electrical signal that directly represents sound.

Compare this to digital audio which can be an electrical

signal, but is an indirect representation of sound. Also see

“Digital Audio”.

Default Gateway

IP address of the electronic devices (such as router)

which provide Internet access.

Digital Audio

Aspect Ratio

An indirect representation of sound by numbers. During

recording, the sound is measured at discrete intervals (44,100

times a second for CD audio) by an analog-to-digital converter,

generating a stream of numbers. On playback, a digital-to-

analog converter generates an analog signal based on these

numbers.Also see “Sampling Frequency” and “Analog Audio”.

The width of aTV screen relative to its height.

ConventionalTVs are 4:3 (in other words, theTV screen

is almost square); widescreen models are 16:9 (theTV

screen is almost twice as wide as its height).

AVCHD

AVCHD is a new format for high definition video camcorders

which can record and play high-resolution HD images.

DLNA (Digital Living Network Alliance)

DLNA is a cross-industry organization of consumer

electronics that formulates DLNA Interoperability Guidelines

for sharing digital contents within a home network.

BD-Live™

BD-Live™ is a BD-video (BD-ROM version 2 Profile

2.0) which contains new functions (e.g. Internet

connection), in addition to the BONUSVIEW™ function.

DNS Server

A server which translates Internet domain names into IP addresses.

Blu-ray Disc™

Dolby Digital

Blu-ray Disc™ is a next generation optical video disc which

is capable of storing much more data than a conventional

DVD.The large capacity makes it possible to benefit from

the features such as high-definition videos, multi-channel

surround sounds, interactive menus and so on.

The system to compress digital sound developed by

Dolby Laboratories. It offers you sound of stereo (2ch)

or multi-channel audio.

Dolby Digital Plus

Dolby Digital Plus is the next generation digital audio

compression technology developed as an extension to

Dolby Digital. Blu-ray Disc™ supports 7.1 multi-channel

surround sound output.

Chapter

Just as a book is split up into several chapters, a title

on a BD-video or DVD-video is usually divided into

chapters. Also see “Title”.

Dolby TrueHD

Cinavia™

DolbyTrueHD is a lossless coding technology developed

for next generation optical discs. Blu-ray Disc™ supports

7.1 multi-channel surround sound output.

Cinavia Notice

This product uses Cinavia technology to limit the use of

unauthorized copies of some commercially-produced

film and videos and their soundtracks.When a prohibited

use of an unauthorized copy is detected, a message will

be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided

at the Cinavia Online Consumer Information Center at

http://www.cinavia.com

DTS (Digital Theater System)

DTS^®is a multi channel surround sound system.You can enjoy

movie dynamic and realistic sound like movie theater. DTS

surround sound technologies were developed by DTS, Inc.

Continued on next page.

EN-63

Download from Www.Somanuals.com. All Manuals Search And Download.

your unit by looking on the rear panel. Some discs are

compatible with more than one region (or all regions).

DTS-HD

DTS-HD^®is a lossless coding technology developed as an

extension of the original DTS Coherent Acoustics format. Blu-

ray Disc™ supports 7.1 multi-channel surround sound output.

Router

A networking device which distinguishes the IP address

assigned to each device and routing and forwarding

information in the computer network.

HDMI (High-Definition Multimedia Interface)

A digital interface between audio and video source. It

can transmit component video, audio, and control signal

with one cable connection.

Sampling Frequency

The rate which sound is measured by a specified interval

to turn into digital audio data.The numbers of sampling

in one second defines as sampling frequency.The higher

the rate, the better the sound quality.

IP Address

A set of numbers which are assigned to devices

participating in a computer network.

Subnet Mask

JPEG (Joint Photographic Experts Group)

JPEG is a method of compressing still picture files.

You can copy JPEG files on BD-RE/-R, DVD-RW/-R,

CD-RW/-R, or SD Memory Card from a computer and

play back the files on this unit.

A mask which is used to determine what subnet an IP

address belongs to.

Switch / Hub

A device used for connecting multiple device to the network.

LAN (Local Area Network)

Title

A group of computer networks covering a small area

like a company, school or home.

A collection of chapters on BD-video or DVD-video.

Also see “Chapter”.

Local Storage

A storage area of sub contents for playing virtual

packages on BD-video.

Track

Audio CD uses tracks to divide up the content of a

disc.The BD-video or DVD-video equivalent is called a

chapter. Also see “Chapter”.

MP3 (MPEG audio layer 3)

MP3 is a method of compressing files.You can copy MP3

files on BD-RE/-R, DVD-RW/-R, CD-RW/-R, or SD Memory

Card from the computer and play back the files on this unit.

Virtual Package

The function which copies data to other media (local

storage) from the Internet and plays secondary video,

secondary audio and subtitles at the same time.The

method of the playback varies depending on discs.

Netflix

Netflix is online movie rental service, offering online

streaming to customers in the United States.

VUDU

PCM (Pulse Code Modulation)

VUDU is a leading HD on-demand video service which

utilizes the Internet connection to deliver the highest

quality on-demand video and Internet applications.

The most common system of encoding digital audio,

found on CD and DAT. Excellent quality, but requires a

lot of data compared to formats such as Dolby Digital

and MPEG audio. For compatibility with digital audio

recorders (CD, MD and DAT) and AV amplifiers with

digital inputs, this unit can convert Dolby Digital, DTS,

and MPEG audio to PCM. Also see “Digital Audio”.

Windows Media™ Audio

Windows Media™ Audio is the audio compressing

technology developed by Microsoft.You can copy

Windows Media™ Audio files on BD-RE/-R, DVD-

RW/-R, CD-RW/-R, or SD Memory Card from a

computer and play them back on this unit.

Proxy Server

Proxy server is a server which acts as an intermediary between

a workstation user and the Internet to ensure security.

x.v.Color

Region Code

“x.v.Color” is a promotion name given to the products

that have the capability to realize a wide color space

based on the xvYCC specifications and is a trademark of

Sony Corporation.

Regions associate discs and players with particular areas

of the world.This unit will only play back discs that have

compatible region codes.You can find the region code of

EN-64

Download from Www.Somanuals.com. All Manuals Search And Download.

21. ESPAÑOL

21.1 Mando a Distancia

10. Botón TOP MENU

Blu-ray Disc™:

Púlselo para mostrar el menú superior.

DVD:

13*

Púlselo para mostrar el menú de títulos.

11. Botones de Î/ï/Í/Æ

Púlselos para seleccionar elementos o

configuraciones.

12. Botón HOME

Púlselo para mostrar el menú de inicio.

13. Botón ¢ (reverso)

Durante la reproducción, púlselo para invertir rápido

la reproducción.

14. Botón Æ (reproducir)*

Púlselo para iniciar o reanudar la reproducción.

15. Botón H (saltar)

Durante la reproducción, púlselo una vez para

volver al comienzo del título, capítulo, pista o archivo

actual.

Durante la reproducción, pulse dos veces sobre la

tecla para volver al título, capítulo, pista o archivo

anterior.

Durante la reproducción de archivos JPEG, púlselo

para volver al archivo anterior.

16. Botón Ê (detener)

Púlselo para detener la reproducción.

17. Botones numéricos

(*) La unidad también se puede encender pulsando

estos botones.

Púlselos para seleccionar un capítulo durante la

reproducción.

8. Botón STANDBY/ON .

Púlselos para introducir números en el campo de

entrada.

Pulse el botón para encender la unidad, o para

pasar la unidad al modo de espera. (Para apagar

completamente la unidad, debe desconectar el cable

de alimentación de CA.)

18. Botón MODE

Durante la reproducción, púlselo para visualizar el

menú de reproducción.

9. Botones de RED / GREEN / BLUE /YELLOW

19. Botón NETFLIX

Púlselo para activar las teclas de atajo en algunas

funciones de BD-vídeo.

Pulse para abrir Netflix.

Cuando se despliega la lista de archivos, presione

para cambiar las páginas.

Continua en la página siguiente.

ES-65

Download from Www.Somanuals.com. All Manuals Search And Download.

20. Botón OPEN/CLOSE ﬂ*

Púlselo para cerrar o abrir la bandeja para discos.

21. Botón POP MENU/MENU

Blu-ray Disc™:

Púlselo para mostrar el menú emergente.

DVD:

Púlselo para mostrar el menú del disco.

22. Botón OK

Púlselo para confirmar o seleccionar elementos de menú.

23. Botón RETURN

Púlselo para volver a la pantalla de funciones o menú mostrado anteriormente.

24. Botón ∫ (adelantar)

Durante la reproducción, púlselo para avanzar rápido la reproducción.

Cuando la reproducción esté en pausa, púlselo para avanzar lentamente la reproducción.

25. Botón G (saltar)

Durante la reproducción, púlselo para saltar al siguiente capítulo, pista o archivo.

Cuando la reproducción esté en modo de pausa, púlselo para avanzar la reproducción imagen a imagen.

26. Botón Δ (pausar)

Púlselo para pausar la reproducción.

27. Botón DISPLAY

Púlselo para visualizar el menú desplegable en pantalla.

28. Botón REPEAT

Presione para seleccionar el modo de repetición.

29. Botón SUBTITLE

Púlselo para seleccionar los subtítulos de un disco.

30. Botón AUDIO

Púlselo para seleccionar el canal de sonido (como idiomas de sonido) de un disco.

31. BotónVUDU

Pulse para abrirVUDU.

32. Botón CLEAR

Púlselo para borrar la información una vez que se ha introducido.

D Nota

• El indicador STANDBY/ON en el panel frontal se atenúa y parpadea cuando se recibe la señal IR del control

remoto.

ES-66

Download from Www.Somanuals.com. All Manuals Search And Download.

21.2 Encontrar el Canal deVídeo en suTelevisor

Revise los siguientes pasos después de haber completado todas las conexiones a suTV.

1. Presione [STANDBY/ON .] (espera/encendido) para Encender la unidad.

2. Encienda su televisor.

3. Ubique el botón de entrada/video en el mando a distancia de laTV. El botón puede variar de acuerdo a

la marca y al modelo de laTV. Una vez localizado el botón presione hasta ver “Espere un...” o el menú de

Configuración Inicial en la pantalla.

Please Wait...

Esta es la visualización correcta de la entrada de la fuente de video.

• Si laTV está conectada por medio de un cable HDMI, puede tomar algunos minutos para que aparezca la

imagen de abertura.

• Cuando pase cierto tiempo sin que haya conectado la unidad aparecerá la sólo pantalla de bienvenida la

primera vez que conecte la unidad.

21.3 Instalación Inicial

Por favor, siga las instrucciones que se exponen a continuación para completar la configuración inicial.

1. Utilice [Î/ï] mientras se presenta la pantalla de bienvenida para seleccionar “Next” y pulse luego [OK].

2. Aparece la pantalla de configuración del idioma. Utilice [Î/ï] para seleccionar su idioma y pulse luego [OK].

Idioma

Por favor, seleccione su idioma para el menú en

pantalla.

English

Español

Français

Atrás

3. Aparece la pantalla de “Modo de Inicio Rápido”. Utilice [Î/ï] para seleccionar el modo deseado y pulse luego

[OK].

4. Aparece la pantalla de “Comprueba automáticamente si hay un software más reciente”. Utilice [Î/ï] para

seleccionar el modo deseado y pulse luego [OK].

5. Aparece la pantalla de configuración de la red. Utilice [Î/ï] para seleccionar el modo deseado y pulse luego

[OK].

• Si selecciona “Por cable” vea informaciones más detalladas en el punto “Wired” de la página 41.

• Si selecciona “Inalámbrico” vea informaciones más detalladas en el punto “Wireless” de la página 44.

ES-67

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITEDWARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or

workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

original retail purchase.

Note:Any product sold and identified as refurbished or renewed carries a ninety (90) days labor

and parts limited warranty.

LIMITS AND EXCLUSIONS:

THISWARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER.A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASEWILL BE REQUIREDTOGETHERWITHTHE

PRODUCTTO OBTAIN SERVICE UNDERTHISWARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center.This limited warranty does not apply to any

product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products

not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product, or damage which results from fire, flood, lightning or other acts of God.

THISWARRANTY DOES NOT COVER PACKING MATERIALS,ANYACCESSORIES (EXCEPT REMOTE

CONTROL),ANY COSMETIC PARTS, COMPLETEASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP.AND ITS REPRESENTATIVES ORAGENTS SHALL IN NO EVENT BE LIABLE FORANY GENERAL,

INDIRECT OR CONSEQUENTIAL DAMAGESARISING OUT OF OR OCCASIONED BYTHE USE OF OR

THE INABILITYTO USETHIS PRODUCT.THISWARRANTY IS MADE IN LIEU OFALL OTHERWARRANTIES,

EXPRESS OR IMPLIED,AND OFALL OTHER LIABILITIES ONTHE PART OF FUNAI,ALL OTHERWARRANTIES

INCLUDINGTHEWARRANTY OF MERCHANTABILITYAND FITNESS FORA PARTICULAR PURPOSE,ARE

HEREBY DISCLAIMED BY FUNAIAND ITS REPRESENTATIVES INTHE UNITED STATES.

ALLWARRANTY INSPECTIONSAND REPAIRS MUST BE PERFORMED BYANAUTHORIZED SERVICE CENTER.

THISWARRANTY IS ONLYVALIDWHENTHE UNIT IS CARRIED-INTOANAUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BEACCOMPANIED BYA COPY OFTHE ORIGINAL RETAIL PURCHASE RECEIPT.IF NO

PROOF OF PURCHASE ISATTACHED,THEWARRANTYWILL NOT BE HONOREDAND REPAIR COSTSWILL

BE CHARGED.

IMPORTANT:

THIS LIMITEDWARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTSTHAT

VARY FROM STATETO STATE. IF,AT ANYTIME DURINGTHEWARRANTY PERIOD,YOU ARE UNABLETO

OBTAIN SATISFACTIONWITHTHE REPAIR OFTHIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVESTHE RIGHTTO MODIFY ANY DESIGN OFTHIS PRODUCTWITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original

packaging or packaging affording an equal degree of protection, to anyAUTHORIZED SERVICE CENTER. FUNAI

CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please

FUNAI SERVICE CORPORATION

Tel: 1-800-605-8610

www.magnavox.com/support

2200 Spiegel Drive, Groveport, OH 43125

★★

Download from Www.Somanuals.com. All Manuals Search And Download.

E5U20UD

Krups Coffeemaker KM4055 User Manual
KWC Outdoor Shower 10061144000 User Manual
Lenoxx Electronics Stereo System CT 995 User Manual
Life Fitness Home Gym 95LEZ 0XXX 01 User Manual
Lightolier Indoor Furnishings VTS2GPK332 User Manual
Magellan GPS Receiver 3030 LM User Manual
Maytag Refrigerator 16008248 User Manual
Melissa Blender 746085 User Manual
Mercedes Benz Automobile 2000 CLK 320 User Manual
Metz Camera Flash 36 AF 3C User Manual