CLK Cabriolet
Operator’s Manual
CLK 320
CLK 430
Download from Www.Somanuals.com. All Manuals Search And Download.
Central locking switch
Automatic central locking
Emergency unlocking in case of accident
36 Antiglare night position
37 Exterior rear view mirrors
38 Instrument cluster
75
76
80
Introduction
Product information
Operator’s manual
Where to find it
7
8
13 Trunk
39 Multifunction steering wheel,
multifunction display
Reporting Safety Defects
15 Trunk lid release switch
Antitheft alarm system
Tow-away alarm
18 Power seats, front
20 Front head restraints
21 Roll bar and head restraints, rear
Backrest
41
86
42 Trip and main odometer, vehicle
44 speed, FSS and engine oil level
45 indicator
50 Audio systems
51 Telephone
53 Navigation system
54 Trip computer
55 Malfunction message memory
57 Individual settings
57 Setting the audio volume
Instruments and controls
Instruments and controls
Center console
90
91
94
99
100
102
104
106
Overhead control panel
Multicontour seat
Operation
Vehicle keys
Start lock-out
General notes on the central
24 Heated seats
27 Seat belts and integrated restraint system
Seat belts
locking system 27
Central locking system
Radio frequency and infrared
28 Seat belt nonusage warning system
BabySmart™ airbag deactivation system
58 Flexible service system (FSS)
63 Engine oil level indicator
107
110
remote control 28
Locking and unlocking
Choosing global or selective mode
30 Supplemental restraint system (SRS)
Emergency tensioning retractor (ETR)
64 Engine oil consumption
64 Exterior lamp switch
111
112
on remote control 31
Opening the trunk
Opening and closing windows
31 Airbags
Safety guidelines for the seat belt,
from outside 32 emergency tensioning retractor and airbag 70
65 Night security illumination
Headlamp cleaning system
113
114
Panic button
Mechanical keys
Doors
33 Infant and child restraint systems
33 Adjusting telescoping steering column
34 Inside rear view mirror
71 Combination switch
74 Hazard warning flasher switch
75 Automatic climate control
115
117
118
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Audio and telephone
Power windows
Interior lighting
Entrance lamps, exit lamps in doors
Sun visors
Illuminated vanity mirrors
Interior
Storage compartments, armrest and
cup holder
Glove box
125 The first 1 000 miles (1 500 km)
143 Maintenance
146 Catalytic converter
146 Emission control
147 Tele Aid
147 Steering lock
148 Starting and turning off the engine
148 Automatic transmission
171 Travelling abroad
171 Cruise control
172 Brake assist system (BAS)
173 Antilock brake system (ABS)
Electronic stability program (ESP)
174
180 What you should know at the
182 gas station
183 Check regularly and before a
200
201
204
206
208
211
213
long trip
192
192
Instrument cluster display
148 Parking brake
150 Driving instructions
151 Drive sensibly – save fuel
Ashtray
Lighter
192 Malfunction and indicator
lamps in the instrument cluster 216
193 On-board diagnostic system
193 Check engine malfunction
Cargo tie down rings
Parcel net in front passenger footwell
152 Drinking and driving
152 Pedals
indicator lamp
193 Supplemental restraint system
(SRS) indicator lamp
193 Fuel reserve and fuel cap
194 placement warning
195 Electronic stability
216
218
218
Armrest, rear bench
152 Power assistance
Telephone, general
Cellular telephone
Garage door opener
153 Brakes
153 Driving off
154 Parking
program(ESP) — warning lamp 219
BAS/ESP malfunction indicator
lamp
Soft top
158 Tires
195
219
219
ABS malfunction indicator lamp
Wind screen
165 Snow chains
198
Winter driving instructions
198 Telescoping steering column – 220
indicator lamp
Deep water
170 Passenger compartment
199 Seat belt warning lamp
200
220
Driving
Control and operation of radio transmitters
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction and indicator lamps in the
center console
AIRBAG OFF indicator lamp
Roll bar warning lamp
Jump starting
263
265
Practical hints
221
221 First aid kit
221 Shelf below rear window
238 Towing the vehicle
238 Transmission selector lever,
manually unlocking
268
269
Malfunction and warning messages in
the multifunction display
DISPLAY DEFECTIVE (engine
control unit)
Stowing things in the vehicle
222
Luggage cover
238 Bulbs
238 Adjusting headlamp aim
274
223
DISPLAY DEFECTIVE (several
systems)
BATTERY/ALTERNATOR
ABS-SYSTEM
BRAKE ASSIST
BRAKE LINING WEAR
BRAKE FLUID
PARKING BRAKE
Spare wheel, vehicle tools, storage
223 compartment
224 Vehicle jack
225 Fuses
Changing batteries in the
240 electronic main key
241 Raising soft top manually
242 Antenna
244 Manual release for fuel filler
246 flap
247 Trunk lamp
277
280
287
225 Hood
226 Checking engine oil level
226 Automatic transmission fluid level
227 Coolant level
227 Adding coolant
287
288
288
247 Replacing wiper blade insert
248
ENGINE FAN
Windshield washer / headlamp clean.system
COOLANT (coolant level)
COOLANT TEMP. (coolant
temperature)
LIGHTING SYSTEM
LIGHT SENSOR
STEER. WHEEL ADJUST.
OIL TEMP.
ENGINE OIL LEVEL
ELEC. STABIL. PROG. (Electronic
stability program)
228
249
Vehicle care
Cleaning and care of the vehicle 292
Windshield and headlamp washer fluid
229 mixing ratio
230 Wheels
231 Tire replacement
231 Rotating wheels
232 Spare wheel
232 Changing wheels
Tire inflation pressure
234
249
250 Engine cleaning
250 Vehicle washing
251 Power washer
252 Plastic and rubber parts
254 Tar stains
259 Window cleaning
293
293
293
293
294
294
WASHER FLUID
235 Battery
261
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Headlamps, taillamps, turn signal
lenses
Wiper blade
Seat belts
Headliner
Instrument cluster
Technical data
294
294 Spare parts service
294 Warranty coverage
294 Identification labels
294 Layout of poly-V-belt drive
300 Coolants
311
313
313
315
300 Consumer information
301 Uniform tire quality grading
302 Index
Steering wheel and gear selector lever 295 Technical data
Hard plastic trim items
303
295 Fuels, coolants, lubricants etc. –
capacities
295 Engine oils
307
309
309
309
309
310
310
311
Upholstery
Ornamental moldings
Paintwork, painted body components
Light alloy wheels
Soft top
Wind screen
Rubber weatherstrip
295 Engine oil additives
296 Air conditioner refrigerant
296 Brake fluid
297 Premium unleaded gasoline
298 Fuel requirements
298 Gasoline additives
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product information
Kindly observe the following in your own best interest:
We recommend using Mercedes-Benz original parts as well as conversion parts and accessories
explicitly approved by us for your vehicle model.
We have tested these parts to determine their reliability, safety and their special
suitability for Mercedes-Benz vehicles.
We are unable to make an assessment for other products and therefore cannot be held responsible
for them, even if in individual cases an official approval or authorization by governmental or other
agencies should exist. Use of such parts and accessories could adversely affect the safety, performance
or reliability of your vehicle. Please do not use them.
Mercedes-Benz original parts as well as conversion parts and accessories approved by us are available
at your authorized Mercedes-Benz Center where you will receive comprehensive information, also on
permissible technical modifications, and where proper installation will be performed.
7
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Operator’s manual
This Operator’s Manual contains a great deal of useful information. We urge you to read it carefully and familiarize
yourself with the vehicle before driving.
For your own safety and longer service life of the vehicle, we urge you to follow the instructions and warnings
contained in this manual. Ignoring them could result in damage to the vehicle or personal injury to you or others.
Vehicle damage caused by failure to follow instructions is not covered by the Mercedes-Benz Limited Warranty.
Your vehicle may have some or all of the equipment described in this manual. Therefore, you may find explanations
for optional equipment not installed in your vehicle. If you have any questions about the operation of any equipment,
your authorized Mercedes-Benz Center will be glad to demonstrate the proper procedures.
Service and warranty information
The Service and Warranty Information Booklet contains detailed information about the warranties covering your
Mercedes-Benz, including:
• New Car Limited Warranty,
• Emission System Warranty,
• Emission Performance Warranty,
• California, Massachusetts, and Vermont Emission Control System Warranty
(California, Massachusetts, and Vermont only),
• State Warranty Enforcement Laws (Lemon Laws).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notice for California retail buyers of Mercedes-Benz automobiles
Under California law you may be entitled to a replacement of your vehicle or a refund of the purchase price, if
Mercedes-Benz USA, LLC or its authorized Mercedes-Benz Center fails to conform the vehicle to its express warranties
after a reasonable number of repair attempts during the period of one year or 12 000 miles from original delivery of
the vehicle. A reasonable number of repair attempts is presumed for a retail buyer (1) if the vehicle is out of service by
reason of repair of substantial nonconformities for a cumulative total of more than 30 calendar days or (2) the same
substantial non-conformity has been subject to repair four or more times and you have at least once directly
notified us in writing of the need to repair the non-conformity and have given us an opportunity to perform the
repair ourselves. Notifications should be sent to the nearest Mercedes-Benz Regional Office listed in the
Service and Warranty Information Booklet.
Maintenance
The Service Booklet describes all the necessary maintenance work which should be performed at regular intervals.
Always have the Service Booklet with you when you take the vehicle to your authorized Mercedes-Benz Center for
service. The service advisor will record each service in the booklet for you.
Roadside assistance
The Mercedes-Benz Roadside Assistance Program provides factory trained technical help in the event of a breakdown.
Calls to the toll-free Roadside Assistance number:
1-800-FOR-MERCedes (in the USA)
1-800-387-0100 (in Canada)
will be answered by Mercedes-Benz Client Assistance Representatives 24 hours a day, 365 days a year.
For additional information refer to the Mercedes-Benz Roadside Assistance Program brochure in your glove box.
9
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Change of address or ownership
If you change your address, be sure to send in the “Change of Address Notice” found in the Service and Warranty
Information Booklet, or simply call the Mercedes-Benz Client Assistance Center (in the USA) at 1-800-FOR-MERCedes,
or Customer Service (in Canada) at 1-800-387-0100. It is in your own interest that we can contact you should the need
arise.
If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
If you bought this vehicle used, be sure to send in the “Notice of Purchase of Used Car” found in the Service and
Warranty Information Booklet, or call the Mercedes-Benz Client Assistance Center (in the USA) at
1-800-FOR-MERCedes, or Customer Service (in Canada) at 1-800-387-0100.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating your vehicle outside the USA or Canada
If you plan to operate your vehicle in foreign countries, please be aware that:
• Service facilities or replacement parts may not be readily available,
• unleaded gasoline for vehicles with catalytic converters may not be available; the use of leaded fuels will damage
the catalysts,
• gasoline may have a considerably lower octane rating, and improper fuel can cause engine damage.
Certain Mercedes-Benz models are available for delivery in Europe under our European Delivery Program. For details,
consult your authorized Mercedes-Benz Center or write to:
In the USA:
In Canada:
Mercedes-Benz USA, LLC
European Delivery Department
One Mercedes Drive
Mercedes-Benz Canada, Inc.
European Delivery Department
849 Eglinton Avenue East
Toronto, Ontario M4G 2L5
Montvale, NJ 07645-0350
11
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We continuously strive to improve our product, and ask for your understanding that we reserve the right to make
changes in design and equipment. Therefore, information, illustrations and descriptions in this Operator’s Manual
might differ from your vehicle.
Optional equipment is also described in this manual, including operating instructions wherever necessary. Since they
are special-order items, the descriptions and illustrations herein may vary slightly from the actual equipment of your
vehicle.
If there are any equipment details that are not shown or described in this Operator’s Manual, your authorized
Mercedes-Benz Center will be glad to inform you of correct care and operating procedures.
The Operator’s Manual and Service Booklet are important documents and should be kept with the vehicle.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Where to find it
The Operator’s Manual is divided into eight sections:
• Instruments and controls: An overview of all the controls that can be operated from the driver’s seat.
• Operation: Information on the vehicle’s equipment and its operation.
• Driving: Important information on driving.
• Instrument cluster display: Displays and indicator lamps on the instrument cluster with brief instructions.
• Practical hints: Assistance and instructions in the event of an emergency.
• Car care: Instructions on caring for your vehicle.
• Technical data: All the important technical data for your vehicle as well as consumer information such as fuels,
coolants, lubricants etc. is contained here.
• Index: Key terms to help you find a topic quickly.
Other documents may also be supplied, depending on your vehicle’s equipment.
Explanation of color used:
Warning notices for the protection of yourself and
others appear on red background.
13
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Problems with your vehicle
If you should experience a problem with your vehicle, particularly one that you believe may affect
its safe operation, we urge you to immediately contact your authorized Mercedes-Benz Center to
have the problem diagnosed and corrected if required. If the matter is not handled to your
satisfaction, please discuss the problem with the Mercedes-Benz Center management, or if
necessary contact us at the following addresses:
In the USA: Client Assistance Center
Mercedes-Benz USA, LLC
One Mercedes Drive
Montvale, NJ 07645-0350
In Canada:
Customer Relations Department
Mercedes-Benz Canada, Inc.
849 Eglinton Avenue East
Toronto, Ontario, M4G 2L5
14
Download from Www.Somanuals.com. All Manuals Search And Download.
For the USA only:
The following text is published as required of manufacturers under Title 49, Code of U.S. Federal Regulations,
Part 575 pursuant to the “National Traffic and Motor Vehicle Safety Act of 1966”.
Reporting Safety Defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or
death, you should immediately inform the National Highway Traffic Safety Administration
(NHTSA) in addition to notifying Mercedes-Benz USA, LLC.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety
defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA
cannot become involved in individual problems between you, your retailer, or Mercedes-Benz USA,
LLC.
To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-424-9393
(or 366-0123 in Washington, D.C. area) or write to: NHTSA, U.S. Department of Transportation,
Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from
the Hotline.
15
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments and controls
Instruments and controls
Center console
Overhead control panel
18
20
21
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instruments and controls
Instruments and controls
18
Download from Www.Somanuals.com. All Manuals Search And Download.
For more detailed descriptions see Index on page 315.
13 Center air outlets, adjustable
For adjustment of air outlets, refer to automatic climate
control, see page 118.
14 Air volume control for center air outlets
15 Left front seat heater switch, see page 55
16 Headlamp washer switch, see page 114
1 Side air outlet, adjustable
2 Air volume control for side air outlet
3 Exterior lamp switch, see page 112
4 Parking brake release, see page 192
5 Parking brake pedal, see page 192
6 Hood lock release, see page 244
7 Combination switch, see page 115
8 Cruise control switch, see page 201
17 Roll bar switch, see page 52
Roll bar warning lamp
18 Hazard warning flasher switch, see page 117
19 Central locking switch, see page 36
20 Switch for tow-away alarm, see page 44
Indicator lamp for antitheft alarm system, see
page 42
21 Right front seat heater switch, see page 55
9 Multifunction steering wheel, see page 86
Horn (with electronic key in steering lock
position 1 or 2)
22 Automatic climate control, see page 118
Rear window defroster switch
23 Glove box (illuminated with electronic key in
10 Instrument cluster, see page 80
steering lock position 1 or 2), see page 148
11 Voice recognition system switch, see separate
24 Audio system,
operating instructions
25 Storage compartment
26 Ashtray with lighter, see page 150
12 Steering lock with ignition/starter
switch, see page 180
19
Instruments and controls
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instruments and controls
Center console
1 Soft top switch, see page 158
2 ESP control switch, see page 209
3 Program mode selector switch, see page 190
4 Left power window switch (front), see page 143
5 Right power window switch (front), see page 143
6 Left power window switch (rear), see page 143
7 Trunk lid release switch, see page 41
1
3
ESP
2
8 Mirror adjustment switch, see page 76
9 Right power window switch (rear), see page 143
10 Airbag Off indicator lamp, see page 221
5
4
10
9
7
8
6
P68.10-2191-27
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Overhead control panel
1 Tele Aid (emergency call system), see page 174
2 Interior lighting, see page 146
1
3 Hands-free microphone for Tele Aid, telephone and
voice recognition system.
4 Rear view mirror, see page 75
2
5 Garage door opener, see page 154
3
4
5
21
Instruments and controls
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Power seats, front
Front head restraints
Roll bar and head restraints, rear
Backrest
Multicontour seat
Heated seats
Seat belts and integrated restraint system
Seat belts
Seat belt nonusage warning system
BabySmart™ airbag deactivation system
Supplemental restraint system (SRS)
Emergency tensioning retractor (ETR)
Airbags
Safety guidelines for the seat belt, emergency
tensioning retractor and airbag
Infant and child restraint systems
Adjusting telescoping steering column
Inside rear view mirror
Antiglare night position
Exterior rear view mirrors
Instrument cluster
45
50
51
53
54
55
57
57
58
63
64
64
65
Operation
Vehicle keys
Start lock-out
General notes on the central locking system
Central locking system
Radio frequency and infrared remote control
Locking and unlocking
Choosing global or selective mode on remote control 31
Opening the trunk
Opening and closing windows from outside
Panic button
Mechanical keys
Doors
24
27
27
28
28
30
31
32
33
33
34
70
71
74
75
75
76
80
Central locking switch
Automatic central locking
Emergency unlocking in case of accident
Trunk
Trunk lid release switch
Antitheft alarm system
Tow-away alarm
36
37
38
39
41
42
44
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Multifunction steering wheel, multifunction display
Trip and main odometer, vehicle speed, FSS and
engine oil level indicator
86
Power windows
143
90
91
94
99
Audio systems
Telephone
Navigation system
Trip computer
Malfunction message memory
Individual settings
Setting the audio volume
Flexible service system (FSS)
Engine oil level indicator
Engine oil consumption
Exterior lamp switch
Night security illumination
Headlamp cleaning system
Combination switch
Interior lighting
Entrance lamps, exit lamps in doors
Sun visors
Illuminated vanity mirrors
Interior
Storage compartments, armrest and cup holder
Glove box
Ashtray
146
146
147
147
148
148
148
150
151
152
152
152
153
153
154
158
165
100
102
104
106
107
110
111
112
113
114
115
117
118
125
Lighter
Cargo tie down rings
Parcel net in front passenger footwell
Armrest, rear bench
Telephone, general
Cellular telephone
Garage door opener
Soft top
Hazard warning flasher switch
Automatic climate control
Operation Audio and telephone
Wind screen
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Central locking system
Vehicle keys
Included with your vehicle are:
When leaving the vehicle always remove the
electronic key from the steering lock, and lock your
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may cause
serious personal injury.
• 2 electronic main keys with integrated radio
frequency and infrared remote controls plus
removable mechanical key.
The locking tabs for the mechanical key portion of
the two electronic main keys are a different color to
help distinguish it.
• 1 electronic reserve key without remote control
functions, plus removable mechanical key.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic main key
The mechanical key (2) can be removed b
sliding it out of the remote control.
y
To do so, move lock (3)
in direction of arrow
mechanical key (2) in direction
and slide the
of arrow
(5 ).
When using the mechanical key (2) for lock operations,
it can be removed by sliding it out of the remote control.
To do so, move locking tab (3) to the right and slide the
mechanical key (2) in direction of arrow (4).
The remote control transmitter is located in the
electronic main key.
The infrared receivers are located in the door handles.
The electronic main key has an integrated radio
frequency and infrared remote control, plus removable
mechanical key.
Notes:
Remove the mechanical key from the electronic main
key when using valet parking service. To prevent access
to trunk or storage compartments lock them separately
and retain the mechanical key.
The remote control (1) operates all locks on the vehicle.
The mechanical key (2) works only in the driver’s door,
trunk, and storage compartment locks.
25
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Electronic reserve key
The electronic reserve key (1) works only in the steering
lock. There are no batteries inside the electronic reserve
key.
The mechanical key (2) works only in the driver’s door,
trunk, and storage compartment locks.
To use the mechanical key (2), remove it from its
electronic reserve key (1).
Note:
We recommend that you carry the electronic reserve
key plus mechanical key with you and keep it in a safe
place (e.g. your wallet) so that it is always handy. Never
leave the electronic reserve key in the vehicle.
6
Obtaining replacement keys
The electronic reserve key is without remote control
functions, but with removable mechanical key.
Your vehicle is equipped with a theft deterrent locking
system requiring a special key manufacturing process.
For security reasons, replacement keys can only be
obtained from your authorized Mercedes-Benz Center.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Start lock-out
Important!
General notes on the central locking system
If the electronic key is inserted in the steering lock, the
vehicle cannot be locked or unlocked with the remote
control.
Removing the electronic key from the steering lock
activates the start lock-out. The engine cannot be
started.
If the vehicle cannot be locked or unlocked:
• Aim transmitter eye at a receiver of either door
handle. Check the batteries of the electronic main
key, see page 288, or synchronize the remote
control, see page 290.
Inserting the electronic key in the steering lock
deactivates the start lock-out.
Note:
• Use the mechanical key to unlock the driver’s door.
To start the engine, insert the electronic main key in
the steering lock. There could be a slight delay until
the electronic main key can be turned in the
steering lock.
In case the engine cannot be started (vehicle’s battery is
in order), the system is not operational. Contact an
authorized Mercedes-Benz Center or call 1-800-FOR-
MERCedes (in the USA) or 1-800-387-0100 (in Canada).
27
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Central locking system
Radio frequency and infrared remote control
The electronic main key has an integrated radio
frequency and infrared remote control.
Due to the extended operational range of the remote
control, it could be possible to unintentionally lock or
unlock the vehicle by pressing the transmit button. If
one of the transmit buttons is pressed, the battery check
lamp lights up briefly – indicating that the batteries are
in order. See page 288 for checking batteries.
The vehicle doors, trunk and fuel filler flap can be
centrally locked and unlocked via remote control.
1 Transmit button
‹ Locking
Opening and closing the windows remotely can only be
done with the infrared portion of the remote control.
Aim transmitter eye at a receiver (6 or 7), press and
hold transmit button Œ or ‹.
ΠUnlocking
Š Opening trunk (if not separately locked)
If the electronic key is inserted in steering lock, the
vehicle cannot be locked or unlocked with the remote
control.
2 Lamp for battery check (see page 288 for changing
batteries if it does not light up briefly)
3 PANIC button
4 Transmitter eye
28
5 Locking tab for mechanical key
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
P80.30-2081-26
P80.30-2082-20
6 Infrared receiver in driver’s door handle
7 Infrared receiver in passenger door handle
29
Central locking system
Instruments
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Locking and unlocking with remote control
The presently active unlocking mode (selective or
global) can only be determined by unlocking the vehicle
with the remote control (see below for changing mode).
Unlocking:
Press transmit button Œ. All turn signal lamps blink
once to indicate that the vehicle is unlocked.
If within 40 seconds of unlocking with the remote
control, neither door nor trunk is opened, the electronic
key is not inserted in the steering lock, or the central
locking switch is not activated, the vehicle will
automatically lock.
The remote control can be programmed for two kinds of
unlocking modes (see below):
Selective unlocking mode –
Press transmit button Œ once to unlock driver’s door
and fuel filler flap.
Press transmit button Πtwice to unlock both doors,
fuel filler flap, and trunk.
Locking:
Press transmit button ‹ once. All turn signal lamps
blink three times to indicate that the vehicle is locked.
If they do not blink three times, a door or trunk is not
properly closed.
Global unlocking mode –
Press transmit button Πonce to unlock both doors,
fuel filler flap, and trunk.
Note:
Notes:
If the vehicle cannot be locked or unlocked by pressing
the transmit button, then it may be necessary to change
the batteries in the electronic main key (if ok, battery
check lamp in electronic main key will light briefly
when pressing transmit button) or to synchronize the
remote control, see pages 277 and 279.
If the trunk was previously locked separately, it will
remain locked, see page39 .
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing global or selective mode on remote control
Important!
Press and hold transmit buttons ‹ and Œ
simultaneously for approx. 6 seconds to reprogram the
remote control. Battery check lamp will blink two times
indicating the completed mode change.
Do not place remote control in trunk since trunk is
locked when the lid is closed if the vehicle is centrally
locked.
Note:
If the trunk was previously locked separately, it will
remain locked, see page 38.
Opening the trunk
Press transmit button Š until trunk lid is released.
A minimum height clearance of 5.9 ft. (1.8 m) is
required to open the trunk lid.
31
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Opening and closing windows from outside
Note:
If the windows cannot be operated automatically by
pressing the transmit button of the remote control then
it may be necessary to change the batteries in the
electronic main key (if ok, battery check lamp in
electronic main key will light briefly when pressing
transmit button), or to synchronize the remote control,
see page 277and 279.
Aim transmitter eye of remote control at a door receiver.
To open:
Continue to press transmit button Πafter unlocking
the vehicle.
The windows begin to open after approx. 1 second.
To interrupt opening procedure, release transmit
button.
Warning!
Never operate the windows if there is the
possibility of anyone being harmed by the opening
or closing procedure.
To close:
Continue to press transmit button ‹ after locking
the vehicle.
In case the procedure causes potential danger, the
procedure can be immediately halted by releasing
the remote control button. To reverse direction of
movement press Œ for opening or ‹ for
closing.
The windows begin to close after approx. 1 second.
To interrupt closing procedure, release transmit button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Panic button
Note:
For operation in the USA only: This device complies
with Part 15, Subpart C, Section 209 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
WARNING: Changes or modification not expressly
approved by party responsible for compliance could void
the user’s authority to operate the equipment.
Mechanical keys
To activate press and hold button (1) for at least one
second. An audible alarm and blinking exterior lamps
will operate for approximately 3 minutes.
The mechanical keys work only in the driver’s door,
trunk, and storage compartment locks.
Notes:
To deactivate press button (1) again, or insert electronic
key in steering lock.
The mechanical key does not operate the central locking
system or antitheft alarm system.
The fuel filler flap cannot be locked or unlocked with
the mechanical key.
33
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Doors
3
2
1
1
1 Opening – pull handle
Important!
2 Unlocking driver’s door
The mechanical key does not operate the central locking
system or antitheft alarm system.
3 Locking driver’s door
4 Individual door from inside:
• Push lock button down to lock.
• Pull inside door handle to unlock.
When you lock the driver’s door with the mechanical
key, the door lock button should move down.
Each individual door must be locked with the respective
door lock button - the driver's door can only be locked
when it is closed. In addition lock the trunk.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
If the vehicle has previously been locked from the
outside, opening a door from the inside will trigger the
alarm. When opening a door while the central locking
system is in the:
To lock, push down lock button and turn mechanical key
in driver’s door lock to position 3. In addition lock the
trunk.
To unlock, pull inside door handle and turn mechanical
key in driver’s door lock to position 2.
• selective unlocking mode, only that individual door
is unlocked. The remaining door, the trunk and fuel
filler flap remain locked,
When unlocking the driver’s door with the mechanical
key, the exterior lamps will flash and the alarm will
sound.
• global unlocking mode, both doors, the trunk and
fuel filler flap are unlocked.
To cancel the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic main key.
Notes:
When opening a door, the door window lowers slightly.
After closing the door, the window closes again.
In case of a malfunction in the central locking system
the doors can be locked and unlocked individually.
35
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Central locking switch
If the vehicle was previously locked with the central
locking switch, while in the global remote control mode,
the complete vehicle is unlocked when a door is opened
from the inside.
Notes:
If the vehicle was previously locked with the remote
control, the doors and trunk cannot be unlocked with
the central locking switch.
If the vehicle has previously been locked from the
outside, opening a door with the inside door handle will
trigger the alarm. To cancel the alarm, insert the
electronic key in the steering lock or press button Œ
or ‹ on the electronic main key.
The fuel filler flap cannot be locked or unlocked with
the central locking switch.
1 Locking
2 Unlocking
The central locking switch is located in the center
console.
The doors and trunk can only be locked with the central
locking switch, if both doors are closed.
If the vehicle was previously locked with the central
locking switch, while in the selective remote control
mode, only the door opened from the inside is unlocked.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic central locking
Notes:
The central locking switch also operates the automatic
central locking.
If doors are unlocked with the central locking switch
after activating the automatic central locking, and
neither door is opened, then the doors remain unlocked
even at vehicle speeds of approx. 9 mph (15 km/h) or
more.
With the automatic central locking system activated, the
doors and trunk are locked at vehicle speeds of approx.
9 mph (15 km/h) or more. The fuel filler flap remains
unlocked.
If a door is opened from the inside at speeds of approx.
9 mph (15 km/h) or less with the automatic central
locking activated, the door will again be automatically
locked at speeds of approx. 9 mph (15 km/h) or more.
To activate:
With electronic key in steering lock position 2 hold
upper portion of switch (1) for a minimum of 5 seconds.
To deactivate:
With electronic key in steering lock position 2 hold
lower portion of switch (2) for a minimum of 5 seconds.
37
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Important!
Emergency unlocking in case of accident
When towing the vehicle, or with the vehicle on a
dynamometer test stand, please, note the following:
The doors unlock automatically a short time after a
strong deceleration is detected, such as in a collision
(this is intended to aid rescue and exit). However, the
electronic key must still be in the steering lock.
With the automatic central locking activated and the
electronic key in steering lock position 2, the vehicle
doors will lock if the left front wheel as well as the right
rear wheel spin at vehicle speeds of approx. 9 mph
(15 km/h) or more.
Driving on rough roads may cause the vehicle to unlock.
If necessary, the vehicle can be locked again with the
central locking switch, see page 36.
To prevent the vehicle door locks from locking,
deactivate the automatic central locking.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunk
When the trunk is separately locked, it remains locked
when centrally unlocking the vehicle.
To deny any unauthorized person access to the trunk,
lock it separately with the mechanical key. Leave only
the electronic main key less its mechanical key with the
vehicle.
Notes:
The mechanical key does not operate the central locking
system or antitheft alarm system.
The trunk can also be opened by using the electronic
0 Neutral position – push to open (arrow)
Š
main key. Press
button.
1 Unlocking
2 Separate locking of trunk – remove mechanical key
in this position.
The trunk lid cannot be opened by the trunk lid release
switch or the electronic main key when previously
locked separately with the mechanical key.
Central locking system
Instruments
39
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
and controls
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
In case of a malfunction in the central locking system
the trunk can be unlocked individually.
To unlock and open the trunk lid, turn mechanical key
to position 1, hold and push to open.
If the fuel filler flap cannot be opened, see page 298.
1
Important!
Do not place mechanical key inside trunk, since trunk is
locked when the lid is closed if the vehicle has been
previously centrally locked.
P88.50-2009-26
To prevent damage to the trunk lid and the soft top
compartment cover, do not open the trunk lid while the
soft top is being raised or lowered.
Lower trunk lid using handle (1) and close it with hands
placed flat on trunk lid. Please remember to keep your
fingers out of the space between the lid and the vehicle.
40
Central locking system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Central locking system
Trunk lid release switch
A minimum height clearance of 5.9 ft. (1.8 m) is
required to open the trunk lid.
To open the trunk, the vehicle must be at standstill. Pull
up on switch until trunk lid is open.
The indicator lamp in the switch remains on with trunk
lid open.
Notes:
The trunk lid cannot be opened by the switch or the
remote control when previously locked separately with
the mechanical key. To open, see page 39.
The switch is located on the center console.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Antitheft alarm system
Antitheft alarm system
The antitheft alarm is automatically armed or disarmed
with the remote control by locking or unlocking the
vehicle.
The antitheft alarm is armed within approx. 10 seconds
after locking the vehicle.
A blinking lamp (1) indicates that the alarm is armed.
1
Operation:
Once the alarm system has been armed, the exterior
vehicle lamps will flash and an alarm will sound when
someone:
• opens a door,
• opens the trunk,
1 Indicator lamp in switch located in center console
• opens the hood,
• attempts to raise the vehicle.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
The alarm will last approximately 3 minutes in form of
flashing exterior lamps. At the same time an alarm will
sound for 30 seconds. The alarm will stay on even if the
activating element (a door, for example) is immediately
closed. The antitheft alarm system is switched off
automatically if the vehicle is unlocked with the
electronic main key. If the alarm stays on for more than
20 seconds, an emergency call is initiated automatically.
See Tele Aid on page 182.
Notes:
We recommend that you carry the electronic reserve
key plus mechanical key with you and keep it in a safe
place (e.g. your wallet) so that it is always handy. Never
leave the electronic reserve key in the vehicle.
When you unlock the driver’s door with the mechanical
key, the exterior lamps will flash and the alarm will
sound.
To interrupt the alarm, insert the electronic key in the
steering lock or press button Œ or ‹ on the
electronic main key.
43
Antitheft alarm system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tow-away alarm
Tow-away alarm
The alarm will last approximately 3 minutes in form of
flashing exterior lamps. At the same time an alarm will
sound for 30 seconds. The alarm will stay on even if the
vehicle is immediately lowered. The tow-away alarm
system is switched off automatically if the vehicle is
unlocked with the electronic main key.
If the alarm stays on for more than 20 seconds, an
emergency call is initiated automatically. See Tele Aid
on page 182.
To prevent triggering the tow-away alarm feature, switch
off the tow-away alarm before towing the vehicle, or
when parking on a surface subject to movement, such
as a ferry or auto train.
To do so, turn electronic key in steering lock to
position 1 or 0, or remove electronic key from steering
lock. Press tow-away alarm switch (1). The indicator
lamp (2) illuminates briefly.
The switch is located in the center console.
1 Press to switch off
Exit vehicle, and lock vehicle with the remote control.
2 Indicator lamp
The tow-away alarm remains switched off until the
vehicle is locked again with the remote control, at which
time it is automatically reactivated.
Once the alarm system has been armed, the exterior
vehicle lamps will flash and an alarm will sound when
someone attempts to raise the vehicle.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Power seats, front
Warning!
Warning!
Do not adjust the driver’s seat while driving.
Adjusting the seat while driving could cause the
driver to lose control of the vehicle.
When leaving the vehicle always remove the
electronic key from the steering lock, and lock your
vehicle.
Never ride in a moving vehicle with the backrest
reclined. Sitting in an excessively reclined position
can be dangerous. You could slide under the seat
belt in a collision. If you slide under it, the belt
would apply force at the abdomen or neck. That
could cause serious or even fatal injuries. The
backrest and seat belt provide the best restraint
when the wearer is in an upright position and the
belt is properly positioned on the body.
The power seats can also be operated with the
driver’s or passenger door open. Do not leave
children unattended in the vehicle or with access
to an unlocked vehicle. Unsupervised use of vehicle
equipment may cause serious personal injury.
To operate the front power seat adjustment switches,
turn electronic key in steering lock to position 1 or 2
(with the driver’s or passenger’s door open, the power
seats can also be operated with the electronic key
removed or in steering lock position 0).
Never place hands under seat or near any moving
parts while a seat is being adjusted.
45
Seats
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
safely. The position should be as far rearward as
possible, consistent with ability to properly operate
controls.
5
Note:
4
Do not move the front passenger seat completely
forward if objects are stored in the parcel net in the
front passenger side footwell. Items in the net may
be damaged.
2
2
3 Seat cushion tilt
1
3
Press the switch in the direction of the arrow until
your legs are lightly supported.
4 Backrest tilt
Press the switch in the direction of the arrow until
your arms are slightly angled when holding the
steering wheel.
The slide switches are located in each door.
We recommend to adjust the power seat in the following
order:
5 Head restraint
During seat adjustment, the head restraint is
automatically adjusted based on seat (fore/aft)
position to support the back of the head
approximately at ear level. Please check the position
of the head restraint to assure that it supports the
back of the head approximately at ear level. The
head restraint angle can also be adjusted manually.
1 Seat, up/down
Press the switch (up/down direction) until
comfortable seating position with still sufficient
headroom is reached.
2 Seat, fore/aft
Press the switch (fore/aft direction) until a
comfortable seating position is reached that still
allows you to reach the accelerator/brake pedal
46
Notes:
Your vehicle is equipped with power head restraints, do
not try to raise or lower them manually.
Download from Www.Somanuals.com. All Manuals Search And Download.
Synchronizing power seats and head restraints
Memory storing and recalling
If the power supply was interrupted (battery
disconnected or empty), the power seats and head
restraints are no longer adjusted automatically.
To resynchronize the adjustment feature, turn
electronic key in steering lock to position 2, move the
seat completely forward and the head restraint fully
down, and hold respective buttons for approx.
2 seconds.
Caution !
Do not remove head restrains except when mounting seat
covers. For removal see page 50. Whenever restraints
have been removed be sure to reinstall them before driving.
6 Memory button
7 Position buttons
Seats
47
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Recalling
Car care
Index
Seats
Storing
Three sets of seat/head restraint and exterior rear view
mirror positions may be programmed into memory.
After the seat/head restraint and exterior rear view
mirrors are positioned, push memory button (6),
release, and within 3 seconds push position button “1”.
A second and third set of positions for the same seat/
head restraint and exterior rear view mirrors can be
programmed into memory by pushing first memory
button (6) and then “2”, respectively “3”.
To recall a seat/head restraint and exterior rear view
mirror position, push and hold position button “1”, “2”
or “3” until seat/head restraint and exterior rear view
mirror movement has stopped. The seat/head restraint
and exterior rear view mirror movement stops when the
position button is released.
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
Note:
See page76 for instructions on adjustment of mirrors.
First move the backrest to an upright position.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Warning!
Prior to operating the vehicle, the driver should adjust
the seat height for proper vision as well as fore/aft
placement and backrest angle to insure adequate
control, reach, operation, and comfort. The head
restraint should also be adjusted for proper height. See
also airbag section on page 66 for proper seat
positioning.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
side front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury can result.
In addition, also adjust the steering wheel to ensure
adequate control, reach, operation, and comfort.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle’s seat belt, fully in accordance with the
child seat manufacturer’s instructions.
Both the inside and outside rear view mirrors should be
adjusted for adequate rearward vision.
Fasten seat belts. Infants and small children should be
seated in a properly secured restraint system that
complies with U.S. Federal Motor Vehicle Safety
Standard 213 and Canadian Motor Vehicle Safety
Standard 213.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
All seat, head restraint, steering wheel, and rear view
mirror adjustments as well as fastening of seat belts
should be done before the vehicle is put into motion.
Seats
49
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
Front head restraints
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of the
head approximately at ear level.
Do not drive the vehicle without the seat head
restraints. Head restraints are intended to help
reduce injuries during an accident.
Removal:
Installation:
Tilt the backrest rearward for easier removal of the front
head restraints.
Push button (1) of the power adjustable head restraint
up for approximately 5 seconds.
Push button (1) up to bring the power adjustable head
restraint to its highest position.
Insert the head restraint and push it down to the stop.
Adjust head restraint to the desired position.
Pull out head restraint completely with both hands.
For positioning of head restraints see also power seats,
front on page 45, and head restraints, rear on page 52 .
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll bar and head restraints, rear
Warning!
The rear head restraints are integrated in the roll bar.
Raising or lowering of the roll bar could injure rear
seated occupants.
The roll bar will be automatically raised in an accident
or in a potentially dangerous driving situation. A ratchet
noise can be heard when the roll bar is automatically
raised.
Before operating the roll bar switch make sure that
the roll bar’s path is clear and no persons due to
inattention are injured by the moving roll bar.
For your own safety we recommend to drive with
the roll bar raised, if
The roll bar can be lowered again after an automatic
deployment by pressing the upper half of the roll bar
switch (for at least 8 seconds) until the roll bar drive
mechanism audibly engages. Then press the lower half
of the switch to lower the roll bar.
• the outside temperature is below +5°F (-15°C).
• the rear seats are occupied by passengers.
Before working on the vehicle, e.g. when changing
wheels, the roll bar should be raised with the
switch, and the electronic key should be removed
from the steering lock, to prevent possible injury.
If the roll bar was raised using the switch, it will be
automatically lowered when activating the soft top
switch.
In case of potential danger release the switch to
immediately interrupt the operating procedure.
Seats
51
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch for roll bar and head restraints, rear
With the engine running and the roll bar lowered, the
warning lamp in the roll bar switch will blink for
approx. 15 seconds. The blinking is reminding you to
raise the roll bar if the rear passenger seats are
occupied. See also page 233 for roll bar warning lamp.
1
2
Important!
The roll bar is intended to be a safety enhancement to
the other features designed into the vehicle. No system
in any vehicle can eliminate the possibility of serious
injury or fatality in an accident. Properly fastened seat
belts and child restraints must be used!
Notes:
P91.59-2001-26
If the warning lamp in the switch comes on, then a
malfunction has been detected. In this case, drive only
with the roll bar raised until the problem has been
corrected. Raise the roll bar by pressing the upper half
of the roll bar switch.
The switch is located in the center console.
Turn electronic key in steering lock to position 2.
Press switch:
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
1 Raise roll bar
2 Lower roll bar
Items being transported in the rear passenger
compartment should be placed in such a manner as not
to affect the movement of the roll bar when being
raised.
The lowering or raising procedure is immediately
interrupted by releasing the roll bar switch.
52
Seats
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
Backrest
Notes:
The automatic seat slide is provided with a safety
feature. The automatic process is interrupted, if the
backrest of the sliding seat is pushed against an
occupant or object. The seat will slide forward, stop, and
make 3 attempts sliding backward.
To halt the automatic process, activate the power seat
switch. Investigate and correct the cause of interruption.
Now use memory button or power seat switch to bring
seat into desired position.
The backrest release lever (1) also serves as a rest for
the front seat belt, bringing it within easy reach.
Warning!
1 Release lever
When leaving the vehicle always remove the
electronic key from the steering lock, and lock your
vehicle.
Folding forward:
Lift release lever (1) and fold backrest forward. The seat
will automatically slide forward and the head restraint
will move down.
The power seats can also be operated with the
driver’s or passenger door open. Do not leave
children unattended in the vehicle or with access
to an unlocked vehicle. Unsupervised use of vehicle
equipment may cause serious personal injury.
Folding back:
Lift release lever (1) and fold backrest back. The seat
and head restraint return to their previous positions.
Never place hands under seat or near any moving
parts during a seat adjustment procedure.
53
To interrupt the procedure, activate the power seat
switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Multicontour seat (optional)
We recommend to adjust the multicontour seat in the
following order:
1 Seat cushion depth
Slide the switch fore or aft until your legs are
supported comfortably.
4
2 Backrest bottom
3 Backrest center
3
2
4 Side bolster adjustment
Adjust the side bolster to provide good lateral
support.
1
The seat cushion movement and amount of backrest
cushion height and curvature can be continuously
varied with regulators (1, 2 and 3) after turning the
electronic key in steering lock to position 2.
P91.25-2063-26
Some models may be equipped with multicontour seats.
These seats have movable seat cushions, and inflatable
air cushions built into the backrest to provide additional
lumbar and side support.
The side bolsters of the backrest can be adjusted with
rocker switch (4):
• press to the right – increase side support,
• press to the left – decrease side support.
If the engine is turned off, the last cushion setting is
retained in memory, and automatically adjusts the
cushion to this setting when the engine is restarted.
54
Seats
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Seats
Heated seats, front (optional)
Press switch to turn on seat heater:
1 Normal seat heating mode. One indicator lamp in
the switch lights up.
2 Rapid seat heating mode. Both indicator lamps in
1
the switch light up.
After approximately 5 minutes in the rapid seat
heating mode, the seat heater automatically
switches to normal operation and only one indicator
lamp will stay on.
2
Turning off seat heater:
If one indicator lamp is on, press upper half of switch.
P54.25-2036-26
If both indicator lamps are on, press lower half of
switch.
The front seat heater switches are located in the center
console.
If left on, the seat heater automatically turns off after
approximately 30 minutes of operation.
The front seat heaters can be switched on with the
electronic key in steering lock positions 1 or 2.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
When in operation, the seat heater consumes a large
amount of electrical power. It is not advisable to use the
seat heater longer than necessary.
The seat heaters may automatically switch off if too
many power consumers are switched on at the same
time, or if the battery charge is low. When this occurs,
the indicator lamp in the switch will blink (both
indicator lamps blink during rapid seat heating mode).
The seat heaters will switch on again automatically as
soon as sufficient voltage is available.
If the blinking of the indicator lamps is distracting to
you, the seat heaters can be switched off.
56
Seats
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Restraint systems
Seat belts and integrated restraint system
Your vehicle is equipped with seat belts for all seats,
emergency tensioning retractors for the front seat belts,
dual front airbags, door mounted side impact airbags
and knee bolsters for driver and front passenger. Their
protective functions are designed to complement one
another.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
side front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury will result.
Seat belts
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle’s seat belt, fully in accordance with the
child seat manufacturer’s instructions.
Important!
Laws in most states and all Canadian provinces require
seat belt use.
All states and provinces require use of child restraints
that comply with U.S. Federal Motor Vehicle Safety
Standard 213 and Canadian Motor Vehicle Safety
Standard 213.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
All child restraint systems are designed to be secured in
vehicle seats by lap belts or the lap belt portion of a lap-
shoulder belt.
For your safety and that of your passengers we strongly
recommend their use.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Warning!
Never ride in a moving vehicle with the backrest
reclined. Sitting in an excessively reclined position
can be dangerous. You could slide under the seat
belt in a collision. If you slide under it, the belt
would apply force at the abdomen or neck. That
could cause serious or even fatal injuries. The
backrest and seat belt provide the best restraint
when the wearer is in an upright position and the
belt is properly positioned on the body.
Failure to wear and properly fasten and position
your seat belt greatly increases your risk of
injuries and their likely severity in an accident.
You and your passengers should always wear seat
belts.
If you are ever in an accident, your injuries can be
considerably more severe without your seat belt
properly buckled. Without your seat belt buckled,
you are much more likely to hit the interior of the
vehicle or be ejected from it. You can be seriously
injured or killed.
Note:
For cleaning and care of the seat belts, see page 294
In the same crash, the possibility for injury or
death is lessened if you are wearing your seat belt.
Seat belt nonusage warning system
Warning!
With the electronic key in steering lock position 2, a
warning sounds for a short time if the driver’s seat belt
is not fastened.
Never let more people ride in the vehicle than there
are seat belts available. Be sure everyone riding in
the vehicle is correctly restrained with a separate
seat belt.
58
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
Fastening of seat belts
Push latch plate (1) into buckle (2) until it clicks. Do not
twist the belt. A twisted seat belt may cause injury.
To help avoid severe or fatal injuries, the lap belt must
be positioned as low as possible on your hips and not
across the abdomen.
Warning!
1
Always fasten your seat belt before driving off.
Always make sure your passengers are properly
restrained – even those sitting in the rear.
3
2
1 Latch plate
2 Buckle
3 Release button
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Unfastening of seat belts
1
3
2
P91.40-2102-26
Tighten the lap portion to a snug fit by pulling shoulder
portion up.
Push the release button (3) in the belt buckle (2). Allow
the retractor to completely rewind the seat belt by
guiding the latch plate (1).
The shoulder portion of the seat belt must be pulled
snug and checked for snugness immediately after
engaging it.
Operation
The inertia reel stops the belt from unwinding during
sudden vehicle stops or when quickly pulling on the
belt. The locking function of the reel may be checked by
quickly pulling out the belt.
Adjust seat belt so that shoulder portion is located as
close as possible to the middle of your shoulder (it
should not touch the neck).
60
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
Caution!
• Never wear belts over rigid or breakable
objects in or on your clothing, such as
eyeglasses, pens, keys etc., as these might
cause injuries.
For safety reasons, avoid adjusting the seat or backrest
into positions which could affect the correct seat belt
position.
• Never wear the shoulder belt under your arm,
against your neck or off your shoulder. In a
crash, your body would move too far forward.
That would increase the chance of head and
neck injuries. The belt would also apply too
much force to the ribs or abdomen, which
could severely injure internal organs such as
your liver or spleen.
Warning!
USE SEAT BELTS PROPERLY.
• Seat belts can only work when used properly.
Never wear seat belts in any other way than as
described in this section, as that could result
in serious injuries in case of an accident.
• Each occupant should wear their seat belt at all
times, because seat belts help reduce the
likelihood of and potential severity of injuries
in accidents, including rollovers. The
• Position the lap belt as low as possible on your
hips and not across the abdomen. If the belt is
positioned across your abdomen, it could cause
serious injuries in a crash.
integrated restraint system includes “SRS”
(driver airbag, front passenger airbag, door
mounted side impact airbags), “ETR” (seat belt
emergency tensioning retractors), and front
seat knee bolsters. The system is designed to
enhance the protection offered to properly
belted occupants in certain frontal (front
airbags) and side (side impact airbags) impacts
which exceed preset deployment thresholds.
• Each seat belt should never be used for more
than one person at a time. Do not fasten a seat
belt around a person and another person or
other objects.
• Belts should not be worn twisted. In a crash,
you wouldn’t have the full width of the belt to
manage impact forces. The twisted belt against
your body could cause injuries.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
• Pregnant women should also use a lap-
shoulder belt. The lap belt portion should be
positioned as low as possible on the hips to
avoid any possible pressure on the abdomen.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle’s seat belt, fully in accordance with the
child seat manufacturer’s instructions.
• Never place your feet on the instrument panel
or on the seat. Always keep both feet on the
floor in front of the seat.
A child’s risk of serious or fatal injuries is
significantly increased if the child restraints are
not properly secured in the vehicle and the child is
not properly secured in the child restraint.
Warning!
USE CHILD RESTRAINTS PROPERLY.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury will result.
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning.
62
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
BabySmartTM airbag deactivation system
The passenger side front airbag will not deploy
only if the 7 indicator lamp remains
illuminated.
Special BabySmartTM compatible child seats, designed
for use with the Mercedes-Benz system and available at
any authorized Mercedes-Benz Center are required for
use with the BabySmartTM airbag deactivation system.
Please be sure to check the indicator every time
you use the special system child seat.
Should the light go out while the restraint is
installed, please check installation. If the light
remains out, do not use the BabySmartTM restraint
to transport children on the front passenger seat
until the system has been repaired.
With the special child seat properly installed, the
passenger front airbag will not deploy. The 7
indicator lamp located on the center console will be
illuminated, except with electronic key removed or in
steering lock position 0. The system does not deactivate
the door mounted side impact airbag.
Self-test BabySmartTM
without special child seat installed
BabySmartTM is a trademark of Siemens Automotive Corp.
After turning electronic key in steering lock to
position 1 or 2, the 7 indicator lamp located on the
center console comes on for approx. 6 seconds and then
extinguishes.
Warning!
The BabySmartTM airbag deactivation system will
ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmartTM compatible.
If the indicator lamp should not come on or is
continuously lit, the system is not functioning. You must
see an authorized Mercedes-Benz Center before seating
any child on the front passenger seat.
Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system.
Follow the manufacturer’s instructions for
installation of special child seats.
63
BabySmartTM is a trademark of Siemens Automotive Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplemental restraint system (SRS)
Emergency tensioning retractor (ETR)
Airbags are intended as a supplement to seat belts.
Airbags alone cannot protect as well as airbags plus
seat belts in impacts for which the airbags were
designed to operate, and do not afford any protection
whatsoever in crashes for which the airbags are not
designed to deploy.
The seat belts for the front seats are equipped with
emergency tensioning retractors. These tensioning
retractors are located in each belt’s inertia reel and
become operationally ready with the electronic key in
steering lock position 1 or 2.
The emergency tensioning retractors are designed to
activate only when the seat belts are fastened during
frontal impacts exceeding the first threshold of the SRS
and in rear impacts exceeding a preset severity level.
They remove slack from the belts in such a way that the
seat belts fit more snugly against the body restricting its
forward movement as much as possible.
The SRS uses two crash severity levels (thresholds) to
activate either the emergency tensioning retractor (ETR)
or front airbag or both. Activation depends on the
direction and severity of the impact exceeding the
preset thresholds and whether the seat belt is fastened.
Seat belt fastened
In cases of other frontal impacts, angled impacts,
roll-overs, certain side impacts, or other accidents
without sufficient frontal or rear impact forces, the
emergency tensioning retractors will not be activated.
The driver and passengers will then be protected by the
fastened seat belts and inertia reel in the usual manner.
• first threshold exceeded: ETR activates
• second threshold exceeded: airbag also activates
Seat belt not fastened
• first threshold exceeded:
For seat belt and emergency tensioning retractor safety
guidelines see page70.
airbag activates, but not ETR
Driver and front passenger systems operate
independently of each other.
64
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
Airbags
2
SRS
SRS
AIRBAG
AIRBAG
1
1 Driver airbag
2 Front passenger airbag
The driver airbag is located in the steering wheel hub.
The passenger front airbag is located in the dashboard
ahead of the front passenger.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
mounted side impact airbags can provide increased
protection to belted front passengers on the impacted
side of the vehicle in side impacts exceeding its preset
threshold.
Important!
3
The operational readiness of the airbag system is
verified by the indicator lamp “SRS” in the instrument
cluster when turning the electronic key in steering lock
to position 1 or 2. If no fault is detected, the lamp will go
out after approximately 4 seconds; after the lamp goes
out, the system continues to monitor the components
and circuitry of the airbag system and will indicate a
malfunction by coming on again.
P91.60-2122-26
3 Side impact airbag
The following system components are monitored or
undergo a self-check: crash-sensor(s), airbag ignition
circuits, front seat belt buckles, emergency tensioning
retractors, seat sensor.
The side impact airbags are located in the doors.
The most effective occupant restraint system yet
developed for use in production vehicles is the seat belt.
In some cases, however, the protective effect of a seat
belt can be further enhanced by an airbag.
Initially, when the electronic key is turned from steering
lock position 0 to positions 1 or 2, malfunctions in the
crash-sensor are detected and indicated (the “SRS”
indicator lamp stays on longer than 4 seconds or does
not come on).
In conjunction with wearing the seat belts, the driver
and front passenger airbags can provide increased
protection for the driver and front passenger in certain
frontal impacts exceeding preset thresholds. Door
Have the system checked at your authorized
Mercedes-Benz Center immediately.
66
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
In the operational mode, after the indicator lamp has
gone out following the initial check, interruptions or
short circuits in the airbag ignition circuit and in the
driver and front passenger seat belt buckle harnesses,
and low voltage in the entire system are detected and
indicated.
The front passenger airbag deploys only if the front
passenger seat is occupied and the indicator lamp on
the center console is not illuminated.
Note:
Heavy objects on the front passenger seat can appear to
the “SRS” to indicate the presence of an occupant in
that seat which causes the passenger front airbag to
deploy in a crash exceeding the appropriate threshold.
Warning!
In the event a malfunction of the “SRS” is indicated
as outlined above, the “SRS” may not be
operational. For your safety, we strongly
recommend that you visit an authorized Mercedes-
Benz Center immediately to have the system
checked; otherwise the “SRS” may not be activated
when needed in an accident, which could result in
serious or fatal injury, or it might deploy
unexpectedly and unnecessarily which could also
result in injury.
Side impact airbags
The side impact airbags are designed to activate only in
certain side impacts exceeding a preset threshold. Only
the side impact airbag on the impacted side of the
vehicle deploys.
The side impact airbag for the front passenger deploys
only if the front passenger seat is occupied.
Side impact airbags operate best in conjunction with a
properly positioned and fastened seat belt.
Front airbags
The driver and front passenger front airbags are
designed to activate only in certain frontal impacts
exceeding a preset threshold.
Note:
Heavy objects on front passenger seat can cause the
side impact airbag to deploy in a crash.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Warning!
Airbags are designed to activate only in certain
frontal (front airbags) impacts, or side (side impact
airbags) impacts which exceed preset thresholds.
Airbags are designed to reduce the potential of
injury in certain frontal (front airbags) impacts,
and side (side impact airbags) impacts which may
cause significant injuries, however, no system
available today can totally eliminate injuries and
fatalities.
Only during these types of impacts, if of sufficient
severity to meet the deployment thresholds, will
they provide their supplemental protection.
The activation of the “SRS” temporarily releases a
small amount of dust from the airbags. This dust,
however, is neither injurious to your health, nor
does it indicate a fire in the vehicle. The dust might
cause some temporary breathing difficulty for
people with asthma or other breathing trouble. To
avoid this, you may wish to get out of the vehicle as
soon as it is safe to do so. If you have any breathing
difficulty but cannot get out of the vehicle after the
airbag inflates, then get fresh air by opening a
window or door.
The driver and passenger should always wear their
seat belts, otherwise it is not possible for the airbags
to provide their intended supplemental protection.
In cases of other frontal impacts, angled impacts,
roll-overs, other side impacts, rear collisions, or
other accidents in which the airbags are not
designed to deploy, the airbags will not be activated.
The driver and passenger will then be protected by
the fastened seat belts.
We caution you not to rely on the presence of the
airbags in order to avoid wearing your seat belt.
The service life of the airbags extends to the date
indicated on the label located on the driver-side door
latch post. To provide continued reliability after date,
they should be inspected by an authorized Mercedes-
Benz Center at that time and replaced when necessary.
68
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Restraint systems
Your vehicle was originally equipped with airbags
which are designed to activate in certain impacts
exceeding a preset threshold to reduce the potential
and severity of injury. It is important to your safety
and that of your passengers that you replace
deployed airbags and repair any malfunctioning
airbags to ensure the vehicle will continue to
provide crash protection for occupants.
• Sit properly belted in an upright position with
your back against the backrest.
• Adjust the driver seat as far as possible
rearward, still permitting proper operation of
vehicle controls. The distance from the center
of the driver’s breastbone to the center of the
airbag cover on the steering wheel must be at
least ten inches (25 cm) or more. You should be
able to accomplish this by a combination of
adjustments to the seat and steering wheel. If
you have any problems, please see your
Warning!
To reduce the risk of injury when the front airbags
inflate, it is very important for the driver and front
passenger to always be in a properly seated
position and to wear their seat belts.
authorized Mercedes-Benz Center.
• Do not lean with your head or chest close to the
steering wheel or dashboard.
For maximum protection in the event of a collision
always be in normal seated position with your back
against the backrest. Fasten your seat belt and
ensure that it is properly positioned on your body.
• Keep hands on the outside of steering wheel
rim. Placing hands and arms inside the rim
can increase the risk and potential severity of
hand/arm injury when the driver front airbag
inflates.
Since the airbag inflates with considerable speed
and force, a proper seating and hands on steering
wheel position will help to keep you at a safe
distance from the airbag. Occupants who are
unbelted, out of position or too close to the airbag
can be seriously injured by an airbag as it inflates
with great force in the blink of an eye:
• Adjust the front passenger seat as far as
possible rearward from the dashboard when
the seat is occupied.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
• Airbags and ETR’s are designed to function on
a one-time-only basis. An airbag or emergency
tensioning retractor (ETR) that was activated
must be replaced.
• Children 12 years old and under must never
ride in the front seat, except in a
Mercedes-Benz authorized BabySmartTM
compatible child seat, which operates with the
BabySmartTM system installed in the vehicle to
deactivate the passenger front airbag when it
is properly installed. Otherwise they will be
struck by the airbag when it inflates in a crash.
If this happens, serious or fatal injury can
result.
• No modifications of any kind may be made to
any components or wiring of the “SRS”. This
includes changing or removing any component
or part of the “SRS”, the installation of
additional trim material, badges etc. over the
steering wheel hub, front passenger airbag
cover, or front door trim panels, and
Failure to follow these instructions can result in
severe or fatal injuries to you or other occupants.
installation of additional electrical/electronic
equipment on or near “SRS” components and
wiring. Keep area between airbags and
occupants free of objects (e.g. packages,
purses, umbrellas, etc.).
Safety guidelines for the seat belt,
emergency tensioning retractor and airbag
Warning!
• Damaged seat belts or belts that were highly
stressed in an accident must be replaced and
their anchoring points must also be checked.
Use only belts installed or supplied by an
authorized Mercedes-Benz Center.
• An airbag system component within the
steering wheel gets hot after the airbag has
inflated. Do not touch.
• Improper work on the system, including
incorrect installation and removal, can lead to
possible injury through an unintended
activation of the “SRS”.
• Do not pass belts over sharp edges.
• Do not make any modification that could
change the effectiveness of the belts.
70
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Infant and child restraint systems
• In addition, through improper work there is
the risk of rendering the “SRS” inoperative or
causing unintended airbag deployment. Work
on the “SRS” must therefore only be performed
by an authorized Mercedes-Benz Center.
We recommend all infants and children be properly re-
strained at all times while the vehicle is in motion. All
lap-shoulder belts except the driver’s seat belt have
special seat belt retractors for secure fastening of child
restraints.
• For your protection and the protection of
others, when scrapping the airbag unit or
emergency tensioning retractor, our safety
instructions must be followed. These
instructions are available at your authorized
Mercedes-Benz Center.
To activate, pull shoulder belt out completely and let it
retract. During the seat belt retraction a ratcheting
sound can be heard to indicate that the special seat belt
retractor is activated. The belt is now locked.
To deactivate, release seat belt buckle and let seat belt
retract completely. The seat belt can again be used in
the usual manner.
• Given the considerable deployment speed and
the textile structure of the airbags, there is the
possibility of abrasions or other injuries
resulting from airbag deployment.
Warning!
Never release the seat belt buckle while vehicle is
in motion, since the special seat belt retractor will
be deactivated.
When you sell the vehicle we strongly urge you to give
notice to the subsequent owner that it is equipped with
an “SRS” by alerting him to the applicable section in the
Operator’s Manual.
71
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Restraint systems
Important!
The use of infant or child restraints is required by law in
all 50 states and all Canadian provinces.
Children 12 years old and under must never ride in
the front seat, except in a Mercedes-Benz
authorized BabySmartTM compatible child seat,
which operates with the BabySmartTM system
installed in the vehicle to deactivate the passenger
front airbag when it is properly installed.
Otherwise they will be struck by the airbag when it
inflates in a crash. If this happens, serious or fatal
injury can result.
Infants and small children should be seated in an
appropriate infant or child restraint system properly
secured by a lap-shoulder belt, and that complies with
U.S. Federal Motor Vehicle Safety Standard 213 and
Canadian Motor Vehicle Safety Standard 213.
A statement by the child restraint manufacturer of
compliance with this standard can be found on the
instruction label on the restraint and in the instruction
manual provided with the restraint.
According to accident statistics, children are safer
when properly restrained in the rear seating
positions than in the front seating positions.
Infants and small children must ride in back seats
and be seated in an appropriate infant or child
restraint system, which is properly secured with
the vehicle’s seat belt, fully in accordance with the
child seat manufacturer’s instructions.
When using any infant or child restraint system, be sure
to carefully read and follow all manufacturer’s
instructions for installation and use.
Please read and observe warning labels affixed to inside
of vehicle and to infant or child restraints.
Infants and small children should never share a
seat belt with another occupant. During an
accident, they could be crushed between the
occupant and seat belt.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Children too big for child restraint systems must
ride in back seats using regular seat belts. Position
shoulder belt across chest and shoulder, not face or
neck. A booster seat may be necessary to achieve
proper belt positioning for children from 41 lbs. to
the point where a lap/shoulder belt fits properly
without one.
When the child restraint is not in use, remove it
from the vehicle or secure it with the seat belt to
prevent the child restraint from becoming a
projectile in the event of an accident.
73
Restraint systems
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Adjusting telescoping steering column
Adjusting telescoping steering column
Unlocking:
Pull handle (1) out to its stop. The indicator lamp,
located in the instrument cluster, comes on.
Adjusting:
To lengthen or shorten the steering column, pull out or
push in steering wheel.
Locking:
Push handle (1) in until it engages. The indicator lamp,
located in the instrument cluster, goes out.
1
Important!
With the electronic key in steering lock position 2, the
indicator lamp in the instrument cluster comes on.
It should go out when the engine is running.
P46.10-2020-26
If the indicator lamp does not go out after starting the
engine, the adjustable steering column is not locked
properly.
Warning!
Do not adjust the steering wheel while driving.
The telescoping adjustment must be locked while
driving. Adjusting the steering wheel while
driving, or driving without the telescoping
adjustment locked could cause the driver to lose
control of the vehicle.
Do not drive the vehicle until you have properly locked
the steering column.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Inside rear view mirror
Note:
Manually adjust the mirror.
The automatic antiglare function does not react, if
incoming light is not aimed directly at sensors in the
mirror.
Use your inside mirror to determine the size and
distance of objects seen in the passenger side convex
mirror.
Warning!
In the case of an accident liquid electrolyte may
escape the mirror housing when the mirror glass
breaks.
Antiglare night position
With the electronic key in steering lock position 2, the
mirror reflection brightness responds to changes in
light sensitivity.
Electrolyte has an irritating effect. Do not allow the
liquid come into contact with eyes, skin, clothing,
or respiratory system. In cases it does, immediately
flush affected area with water, and seek medical
help if necessary.
With gear selector lever in position “R”, or with the
interior lamp switched on, the mirror brightness does
not respond to changes in light sensitivity.
75
Rear view mirrors
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Rear view mirrors
Exterior rear view mirrors
With the electronic key in steering lock position 2, the
driver’s side mirror reflection brightness responds to
changes in light sensitivity.
With gear selector lever in position “R”, or with the
interior lamp switched on, the driver’s side mirror
brightness does not respond to changes in light
sensitivity.
Warning!
Exercise care when using the passenger-side
mirror. The passenger-side exterior mirror is
convex (outwardly curved surface for a wider field
of view). Objects in mirror are closer than they
appear. Check your inside rear view mirror or
glance over your shoulder before changing lanes.
The switch is located on the center console.
Turn electronic key in steering lock to position 2.
First select the mirror to be adjusted – press button:
% Left mirror
Notes:
The exterior mirrors have electrically heated glass. The
heater switches on automatically, depending on outside
temperature.
& Right mirror
If an exterior mirror housing is forcibly pivoted from its
normal position, it must be repositioned by applying
firm pressure until it snaps into place.
To adjust, toggle the switch forward, backward or to
either side.
76
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
In the case of an accident liquid electrolyte may
escape the mirror housing when the mirror glass
breaks.
Electrolyte has an irritating effect. Do not allow the
liquid come into contact with eyes, skin, clothing,
or respiratory system. In cases it does, immediately
flush affected area with water, and seek medical
help if necessary.
Important!
Electrolyte drops coming into contact with the vehicle
paint finish can only be completely removed while in
their liquid state, by applying plenty of water.
77
Rear view mirrors
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing mirror positions in memory
Parking position
The exterior rear view mirror positions are stored in
memory with the seat/head restraint position and can
be recalled when necessary, see page 47.
The passenger-side exterior mirror can be adjusted and
programmed to assist the driver during parking
maneuvers (e.g. to observe the curb or other objects
close to the vehicle).
With electronic key in steering lock position 2, and the
exterior rear view mirror switch in the passenger side
position, the passenger-side mirror will be turned
downward when placing the gear selector lever in “R”
Reverse.
The mirror position can now be adjusted as desired.
78
Rear view mirrors
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Rear view mirrors
At speeds above approx. 6 mph (10 km/h), upon shifting
gear selector lever from “R” Reverse, or upon pressing
the driver’s side mirror button, the passenger-side
mirror will return to its previous position.
4. Using the toggle switch, select the final downward
position for the mirror.
Press green memory button located in switch cluster
for driver seat.
5.
Readjust the mirror as desired.
6. While holding green memory button pull the mirror
rearward.
toggle switch
One passenger-side mirror position can be stored in
memory. To do so:
7. Release the green button and toggle switch.
The mirror position is now stored in memory.
1. Turn electronic key to steering lock position 2.
The vehicle must be stationary.
2. Select passenger-side mirror
.
3. Place gear selector in "R" Reverse. The mirror will turn
downward
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Instrument cluster
80
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Push buttons V and W for intensity of instrument
8 Speedometer
lamps, see page 83
9 Trip odometer, see page
10 Main odometer
85
2 Push button J for resetting trip odometer, see
page 85, or multifunction indicator see page
85
3 Coolant temperature gauge, see page 84
11 Multifunction indicator, see page 222
or FSS indicator, see page 10
7
4 Fuel gauge with reserve and fuel cap placement
warning lamp, see page 218
12 Right turn signal indicator lamp, see combination
switch on page 115
5 Outside temperature indicator, see page 84
13 Tachometer, see page 85
6 Left turn signal indicator lamp, see combination
14 Gear range indicator display, see selector lever
switch on page 115
86
positions on page 1
7 ESP warning lamp, see page 219
104.
15 Clock, see page
81
Instrument cluster
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instrument cluster
Indicator lamps in the instrument cluster
Telescoping steering column not locked,
see page220
High beam
SRS malfunction, see page 218
SRS
ABS malfunction, see page 219
ABS
If the “CHECK ENGINE” malfunction
indicator lamp comes on when the engine is
running, it indicates a malfunction of the
fuel management system, emission control
system, systems which impact emissions, or
the fuel cap is not closed tight. In all cases,
we recommend that you have the
CHECK
ENGINE
Brake fluid low (except Canada),
Parking brake engaged, see page 226
BRAKE
Brake fluid low (Canada only),
Parking brake engaged, see page 226
malfunction checked as soon as possible,
see page 218.
BAS malfunction, see page 204
ESP malfunction, see page 208
BAS
ESP
Function indicator lamp on the center console
ESP. Adjust driving to road condition,
see page 208
Front passenger airbag automatically
switched off, see page 63.
Fasten seat belts, see page 58
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Activating instrument cluster display
The instrument cluster is activated by:
• Opening the door.
Instrument lamps
• Pressing button J, V or W on the instrument
cluster.
• Turning the electronic key in steering lock to
position 1 or 2.
• Switching on the exterior lamps.
Display illumination
The display for temperature, odometer, multifunction
indicator, FSS indicator and clock is illuminated briefly
when opening the driver’s door.
P54.30-2767-26
Activate the instrument cluster.
The display illumination brightness responds
automatically according to changes in the surrounding
light sensitivity.
Press V or W button to vary intensity of instrument
lamps.
To briefly illuminate the display (with electronic key
removed or in steering lock position 0), press button J.
83
Instrument cluster
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Instrument cluster
Coolant temperature gauge (3)
Outside temperature indicator (5)
During severe operating conditions and stop-and-go city
traffic, the coolant temperature may rise close to the red
marking.
The temperature sensor is located in the front bumper
area. Due to its location, the sensor can be affected by
road or engine heat during idling or slow driving. This
means that the accuracy of the displayed temperature
can only be verified by comparison to a thermometer
placed next to the sensor, not by comparison to external
displays (e.g. bank signs etc.).
The engine should not be operated with the coolant
temperature in the red zone. Doing so may cause
serious engine damage which is not covered by the
Mercedes-Benz Limited Warranty.
Adaptation to ambient temperature takes place in steps
and depends on the prevailing driving conditions (stop-
and-go or moderate, constant driving) and amount of
temperature change.
Warning!
• Driving when your engine is badly overheated
can cause some fluids which may have leaked
into the engine compartment to catch fire. You
could be seriously burned.
Warning!
The outside temperature indicator is not designed
to serve as an Ice-Warning Device and is therefore
unsuitable for that purpose. Indicated
temperatures just above the freezing point do not
guarantee that the road surface is free of ice.
• Steam from an overheated engine can cause
serious burns and can occur just by opening
the engine hood. Stay away from the engine if
you see or hear steam coming from it.
Turn off the engine, get out of the vehicle and do
not stand near the vehicle until it cools down.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip odometer (9)
Tachometer (13)
To reset to “0” miles/km:
The red marking on tachometer denotes excessive
engine speed.
Activate the instrument cluster if it is not already
activated by pressing the J button on the instrument
cluster.
Avoid this engine speed, as it may result in serious
engine damage that is not covered by the
Mercedes-Benz Limited Warranty.
Press button è or ÿ on the multifunction
steering wheel repeatedly until the trip odometer
appears if it is not displayed. See page 92.
To help protect the engine, the fuel supply is interrupted
if the engine is operated within the red marking.
Press button J on the instrument cluster to reset trip
odometer.
85
Instrument cluster
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Multifunction steering wheel, multifunction display
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Depending on your vehicle’s equipment, you may use
the buttons on the multifunction steering wheel to call
up, control and set the following systems in the
multifunction display:
Press the è or ÿ button repeatedly until the
required system is displayed.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
1 Trip odometer and main odometer, see page 90
Flexible service system (FSS), see page 107
Engine oil level indicator, see page 110
You may call up additional displays within some of these
categories by pressing the j or k button.
2 Audio systems, see page 91
Warning!
Radio, see page 91
CD player (optional), see page 92
Cassette player, see page 93
A driver’s attention to the road must always be his/
her primary focus when driving.
For your safety and the safety of others,
3 Navigation system (optional), see page 99
programming and selecting
features through the
multifunction steering wheel should only be done
4 Malfunction message memory, see page 102
5 Individual settings, see page 104
6 Trip computer, see page 100
road conditions
by the driver when traffic and
permit it to be done safely, including pulling over toa
safe location where that is required for safe operation.
After start
After reset
Fuel tank content
7 Telephone (if so equipped), see page 94
87
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Turn the electronic key in steering look to position 1
or 2.
1
1
Press button:
3 è for next system
2
4 ÿ for previous system
OFF
RESUME
5 j for next display in system
6 k for previous display in system
7 æ to increase the volume
8 ç to decrease the volume
9 í to dial a telephone number, see page 96
5
6
8
7
10
4
9
3
See page 98 for instructions on answering an
incoming call.
TEL
10 ì to end a call, see page 98
1 Multifunction steering wheel
2 Multifunction display
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the è or ÿ button repeatedly until the
Note:
required system is displayed.
The displays in the multifunction display can be set to
German, English, French, Italian or Spanish language.
See the “TEXT” individual setting on page 104 for
instructions on changing the language setting.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
The displays for the audio systems (radio, CD player,
cassette player) will appear in English, regardless of the
language selected.
You may call up additional displays in some systems by
pressing the j or k button.
89
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Trip and main odometer, vehicle speed, FSS and
engine oil level indicator
1 Trip odometer and main odometer
See page 85 for instructions on resetting the trip
odometer.
FSS (Flexible service system), see page 107.
2
3
Engine oil level indicator, see page 110 .
Press è or ÿ button repeatedly until the trip
odometer and main odometer display (1) appears.
Press the j or k button repeatedly until the
required display (2, 3, 1) appears.
Pressing the è or ÿ button displays the next or
previous system.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio systems
Radio
1 Audio system is switched off.
2 The radio is switched on.
3 Wave band setting and memory location number,
where appropriate.
4 Station frequency.
5 This only appears when “MEMORY” rather than
“FREQUENCY” has been selected in the individual
settings. See page 104 .
The radio must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Press button j or k repeatedly until the required
station or frequency is displayed.
Use the j of k button to select a stored station or
station frequency. This depends on the selection made
in the “STATION SEARCH USING” setting menu.
See page 104.
Pressing the è or ÿ button displays the next or
previous system.
P54.30-2936-27
91
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
CD player (optional)
1 Audio system is switched off.
2 The CD player is switched on.
3 The number of the CD currently playing is displayed
if you are using a CD changer.
4 Track number.
The radio must be switched on.
The CD player must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Press the j or k button repeatedly until the
required track number (4) is displayed.
Pressing the è or ÿ button displays the next or
previous system.
Note:
To select a CD from the magazine, press a number on
the audio system or the (optional) COMAND system key
pad located in the center dashboard.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette player
1 Audio system is switched off.
2 The cassette player is switched on.
3 Side being played.
The radio must be switched on.
The cassette player must be switched on.
Press the è or ÿ button repeatedly until
display (2) appears.
Pressing the j button fast forwards on to the next
track.
Pressing the k button rewinds the cassette to the
beginning of the current track.
Pressing the è or ÿ button displays the next or
previous system.
Note:
To select the reverse side of the tape, press button below
track number on the audio system display, or enter
request on the (optional) COMAND system located in
the center dashboard.
93
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Telephone
1 The telephone is switched off.
Telephone book
2 The vehicle is currently outside the transmitter or
receiver range.
3 The telephone is ready for use.
4 Name selected from the telephone book.
5 Number for the name selected. Dialing commences.
6 Dialing is completed. The name is displayed. The
display remains for the duration of the call.
Memory location number.
7
P54.30-2864-27
94
Download from Www.Somanuals.com. All Manuals Search And Download.
The telephone must be switched on.
Press the í button when the name you require
appears in the display (4). The telephone number (5) is
dialed.
Press the è or ÿ button repeatedly until the
display (3) appears. Refer to the separate telephone
instruction manual.
The name will be displayed when dialing is completed.
Display (6) remains for the duration of the call.
Pressing j or k “browses” alphabetically
forwards or backwards through the telephone book,
providing it was previously downloaded. See telephone
operator’s manual for details concerning downloading.
Pressing button j or k for longer than a second
“browses” rapidly through the telephone book.
The name selected appears in the display.
Pressing the ì button hangs up and display (3)
appears.
Pressing the è or ÿ button displays the next or
previous system.
Note:
Press the ì button if you do not wish to make a call.
The procedure is cancelled and display (3) appears.
95
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Redialing
1 The telephone is ready for use.
2 Number or name stored in the redial memory.
3 Number in the redial memory – redialing has
commenced.
4 Dialing is completed and the name stored in the
telephone book is displayed or the number dialed
will remain displayed if no name has been stored.
The display remains for the duration of the call.
5
Memory location numbers — the 10 most recently
dialed numbers are stored.
L0, most recently dialed number,
L1 to L9, previously dialed numbers.
P54.30-2899-27
96
Download from Www.Somanuals.com. All Manuals Search And Download.
The telephone must be switched on.
Press the í button when the required number or
name appears in the display (2).
The telephone number (3) is dialed.
Press the è or ÿ button repeatedly until the
display (1) appears.
Once dialing is completed the name (4) is displayed if
the name is stored in the telephone book; failing that
the number dialed will remain displayed. The display
remains for the duration of the call.
Pressing the í button activates the redial memory
and the most recently dialed number is displayed.
Pressing the j or k button “browses” forwards or
backwards through the redial memory. The number
selected appears in the display.
Pressing the ì button hangs up and display (1)
appears.
Note:
Pressing the è or ÿ button displays the next or
previous system.
Press the ì button if you do not wish to make a call.
The procedure is cancelled and display (1) appears.
97
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Incoming call
1 “CALL” — you are being called
Press the í button to answer the call.
Press the ì button to hang up or if you do not wish
to answer the incoming call.
The telephone must be switched on.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation system (optional)
1 The navigation system is switched off.
2 The navigation system is switched on but no
destination has been specified.
3 The navigation system is switched on and
destination guidance is active.
Press the è or ÿ button repeatedly until the
required system is displayed.
See the separate COMAND (Cockpit Management and
Data System) operator’s manual for notes on the
navigation system.
Pressing the è or ÿ button displays the next or
previous system.
P54.30-2985-27
99
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Trip computer
1 “AFTER START” – trip odometer records distance
from first engine start after more than five hours of
electronic key not being in steering lock position 2
2 “AFTER RESET” – trip odometer records distance
from first engine start until reset
3 Estimated driving range remaining and fuel tank
contents
4 Distance covered “AFTER START” respectively
“AFTER RESET”
5 Elapsed time “AFTER START” respectively
“AFTER RESET”
6 Average speed “AFTER START” respectively
“AFTER RESET”
7 Average fuel consumption “AFTER START”
respectively “AFTER RESET”
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the button è or ÿ repeatedly until the
display (1) appears.
To reset the “AFTER START” (1) or “AFTER RESET” (2)
odometer memory at any time:
Press the j or k button until the display for trip
odometer memory “AFTER START” (1) and
“AFTER RESET” (2), or the display (3) for estimated
driving range remaining and fuel tank contents
appears.
Call up the relevant display (1 or 2) using the j or
k button and press the J button in the instrument
cluster until the values are reset to “0”.
The “AFTER START” trip odometer reading is
automatically reset after four hours of electronic key not
being in steering lock position 2.
Pressing the è or ÿ button displays the next or
previous system.
Note:
The “AFTER START” display (1) always appears when
the trip computer is called up.
101
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Malfunction message memory
1 There are no messages stored in the system
2 Number of messages stored in the system
Press the è or ÿ button repeatedly until the
malfunction message memory (1 or 2) is displayed.
Press the j or k button if display (2) appears.
The stored malfunction messages will now be displayed
in order. See page 222 for malfunction and warning
messages. Display (2) will reappear after you have
scanned all the malfunction messages.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Should any malfunctions be stored while driving, they
will reappear in the display (2) when the electronic key
is in steering lock position 0 or removed from the
steering lock.
Important!
Malfunction and warning messages are only indicated
for certain systems and displayed to a low level of detail.
The malfunction and warning messages are simply a
reminder with respect to the operation of certain
systems and do not replace the driver’s responsibility to
maintain the vehicle’s operating safety by having all
required maintenance and safety checks performed on
the vehicle and by bringing the vehicle to an authorized
Mercedes-Benz Center to address the malfunction and
warning messages. See page 216.
Specific malfunctions can be recalled by pressing
button J. Each malfunction or warning message must
be acknowledged by pressing button J. Once all
messages are cancelled, the odometer display should
reappear.
Pressing the J button in the instrument cluster
immediately switches to the next malfunction message.
The malfunction message memory will be cleared when
the electronic key is turned in the steering lock to
position 1 or 2. Should any subsequent malfunctions
occur, they will be displayed in the malfunction
message memory.
Pressing the è or ÿ button displays the next or
previous system.
103
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Individual settings
104
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Preliminary display of the individual settings
“STATION SEARCH USING” – radio adjustment
7
2 “SET TIME HOURS”
“FREQUENCY” – use the j or k button to
select a frequency
(Only vehicles without COMAND)
“MEMORY” – use the j or k button to select
a stored station (preset memory)
3 “SET TIME MINUTES”
(Only vehicles without COMAND)
See page 106 for instructions on returning the
setting menus to the factory settings
4 “12/24 HOURS” – the unit set is displayed in the
instrument cluster
8
9
(Only vehicles without COMAND)
Selection marker – indicates the setting selected
5 “TEMP. INDICATOR” – the unit set is displayed in
the outside temperature display in the instrument
cluster and in the automatic air conditioner display
Notes:
These settings may only be performed with the vehicle
at standstill and with the key in steering lock position 1
or 2.
“TEXT” – sets the language used in the
multifunction display
6
105
Multifunction steering wheel, multifunction display
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Multifunction steering wheel, multifunction display
Press the è or ÿ button repeatedly until the
To return setting menus (4 to 8) to their factory settings:
individual setting preliminary display (1) appear.
• Call up the individual setting preliminary
Press the j or k button until the required setting
display (1).
menu (2 to 8) is displayed.
• Press the J button in the instrument cluster for
Pressing the æ or ç button sets the time in
setting menus (2, 3) and controls the selection marker
in setting menus (4 to 8).
approximately 3 seconds. Display (9) will appear.
• Press the J button once more, the message
“RESET TO FACTORY SETTINGS” appears in the
display.
The settings made are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus.
The individual setting preliminary display (1) will
appear if you do not press the J button within
about 5 seconds. The setting menus will not be
reset.
Pressing the è or ÿ button displays the next or
previous system.
Setting the audio volume
Notes:
You can only adjust the volume of the system currently
in use. The volume setting for each system (audio,
telephone, navigation and voice recognition system) is
stored separately.
Settings can only be selected with the vehicle stationary
or moving slowly.
The individual setting preliminary display (1) will
appear if you speed up.
Setting button:
The setting menu previously called up will reappear
when the vehicle stops or slows down, providing no
other system has been called up in the meantime.
æ increases the volume.
ç reduces the volume.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Flexible service system (FSS)
(service indicator)
The message is displayed for approx. 10 seconds when
turning the electronic key in steering lock to position 2,
or while driving when reaching the service warning
threshold.
The symbols and messages indicate the type of service
to be performed:
9 Service A
½ Service B
10
One of the following messages will appear in the display
(e.g. Service A):
“SERVICE A – IN xx DAYS”
“SERVICE A – IN xx MILES” (Canada: KM)
“SERVICE A – EXCEEDED BY xx DAYS”
“SERVICE A – EXCEEDED BY xx MILES” (Canada: KM)
“PERFORM SERVICE"
The FSS permits a flexible service schedule that is
directly related to the operating conditions of the
vehicle.
The next service due date is displayed either in days or
in miles, depending on your driving style.
The symbol 9 or ½ appears together with a
message in the multifunction indicator prior to the next
suggested service. Depending on operating conditions
throughout the year, the next service is calculated and
displayed in days or distance remaining.
Once the suggested service term has passed, the symbol
and message appear for approx. 30 seconds and a signal
sounds every time when turning the electronic key in
steering lock to position 2.
107
Flexible service system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Flexible service system
The service indicator disappears automatically after
30 seconds or if button J on the instrument cluster is
pressed.
Notes:
When disconnecting vehicle battery for one or more
days at a time, such days will not be counted. Any such
days not counted by the FSS can be added by your
Mercedes-Benz Center.
Calling up service indicator manually:
Turn the electronic key in steering lock to position 1.
The interval between services is determined by the type
of driving for which the vehicle is used. For example,
driving at extreme speeds, and cold starts combined
with short distance driving in which the engine does not
reach operating normal temperature, reduce the interval
between services.
Call up the trip odometer and main odometer, by
pressing button è or ÿ on the multifunction
steering wheel until the display appears. See page 90.
Press button j or k until the FSS indicator
appears.
Pressing the è or ÿ button displays the next or
previous system.
Important!
The FSS indicator is not an engine oil level indicator.
See page 110 for engine oil level indicator.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Following a completed A or B service the
Mercedes-Benz Center sets the counter mileage to
10 000 miles (Canada: 15 000 km) and 365 days.
The multifunction display will show the question:
“DO YOU WANT TO RESET SERVICE INTERVAL? –
CONFIRM BY PRESSING R”
The counter can also be set by any individual. To do so:
Turn the electronic key in steering lock to position 2.
Press button J on the instrument cluster again, and
hold until a signal sounds. The message “SERVICE
INTERVAL HAS BEEN RESET” appears in the
multifunction display.
To call up the trip odometer and main odometer, press
button è or ÿ on the multifunction steering
wheel until the display appears. See page 90.
The new service indicator is displayed with the reset
distance of 10 000 miles (Canada 15 000 km).
Press button j or k until the FSS indicator
appears.
If the FSS counter was inadvertently reset, have a
Mercedes-Benz Center correct it.
Press button J on the instrument cluster for
However you choose to set your reference numbers, the
scheduled services as posted in the Service Booklet
must be followed to properly care for your vehicle.
approximately 2 seconds.
109
Flexible service system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Engine oil level indicator
Engine oil level indicator
Turn the electronic key in steering lock to position 2.
To call up the trip odometer and main odometer, press
button è or ÿ on the multifunction steering
wheel until the display appears. See page 90.
Press button j or k on the multifunction
steering wheel repeatedly until the “MEASUREMENT
CORRECT – ONLY IF VEH. LEVEL” engine oil level
indicator appears. This indicator is only a reminder.
Measurement can be cancelled by pressing button j
or k if the vehicle is not parked on level ground. An
incorrect reading will be recorded if you do not cancel
the measurement. Move the vehicle to level ground and
measure again.
The electronic key in steering lock is not in position 2 if
the “ENGINE OIL LEVEL – SWITCH ON IGNITION”
message appears.
To check the engine oil level, park vehicle on level
ground, with engine at normal operational temperature.
The “ENGINE OIL LEVEL – MEASURING NOW”
message is displayed after approximately 3 seconds.
Check oil level approximately 5 minutes after stopping
the engine, allowing for the oil to return to the oil pan.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
One of the following messages will subsequently appear
on the indicator:
Perform the engine oil level check with the dipstick, if it
cannot be completed via the multifunction display.
See page 246
“ENGINE OIL LEVEL – O.K.”
No oil needs to be added.
In this case we recommend that you have the system
checked at a Mercedes-Benz Center.
“ENGINE OIL LEVEL – ADD 1.0 QUART”
(Canada: 1.0 L)
Note:
“ENGINE OIL LEVEL – ADD 1.5 QUART”
See malfunction and warning messages on page 222
and page 232 if an engine oil level indicator appears on
the multifunction display when the engine is running.
(Canada: 1.5 L)
“ENGINE OIL LEVEL – ADD 2.0 QUART”
(Canada: 2.0 L)
The engine oil level cannot be checked while the engine
is running. The “ENGINE OIL LEVEL – NOT WHEN
ENGINE ON” message will appear.
See page 246 for instructions on adding engine oil.
“ENGINE OIL LEVEL – REDUCE OIL LEVEL”
Do not overfill the engine.
Excessive oil must be siphoned or drained off. It could
cause damage to the engine and catalytic converter not
covered by the Mercedes-Benz Limited Warranty.
Engine oil consumption
Engine oil consumption checks should only be made
after the break-in period. During the break-in period,
higher oil consumption may be noticed and is normal.
Frequent driving at high engine speeds results in
increased consumption.
The message “PERF. SERV. ON TIME” (perform service
[engine oil level check] on time) will be displayed if a
proper oil level check cannot be performed. The engine
oil level check can be repeated after a short time.
111
Engine oil level indicator
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamp switch
Exterior lamp switch
B Parking lamps plus low beam or high beam
headlamps (combination switch pushed forward)
ˆ Standing lamps, right (turn left one stop)
‚ Standing lamps, left (turn left two stops)
… Front fog lamps (pull out one stop) with parking
lamps and/or low beam headlamps on. Green
indicator lamp in lamp switch comes on.
„ Rear fog lamp (pull out to 2nd detent) in addition
to fog lamps. Yellow indicator lamp in lamp switch
comes on.
Standing lamps
When the vehicle is parked on the street the standing
lamps (right or left side parking lamps) can be turned
on, making the vehicle more visible to passing vehicles.
D Off
C Parking lamps (also side marker lamps, taillamps,
license plate lamps, instrument panel lamps)
Canada only: When the engine is running, the low
beam is additionally switched on.
The standing lamps cannot be operated with the
electronic key in steering lock position 2.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Daytime running lamps (Canada only)
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS” in the multifunction indicator appears if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.
When the engine is running and the selector lever is in
a driving position, the low beam headlamps (includes
parking lamps, side marker lamps, taillamps and
license plate lamps) are automatically switched on.
When shifting from a driving position to position “N”
or “P”, the low beam switches off (2 seconds delay).
Fog lamps will operate with the parking lamps and/or
the low beam headlamps on. Fog lamps should only be
used in conjunction with low beam headlamps. Consult
your State or Province Motor Vehicle Regulations
regarding allowable lamp operation.
For nighttime driving the exterior lamp switch should
be turned to position B to permit activation of the
high beam headlamps.
Fog lamps are automatically switched off when the
exterior lamp switch is turned to position D.
Night security illumination
When exiting the vehicle after driving with the exterior
lamps on, they switch on again for added illumination
for approximately 30 seconds after closing the last door.
The lamp-on time period can be changed at your
Mercedes-Benz Center.
113
Exterior lamp switch
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Headlamp cleaning system
Headlamp cleaning system (optional)
The switch is located in the center console.
The headlamp washer can be activated with the
electronic key in steering lock position 2.
Briefly press symbol side of switch.
P82.15-2007-26
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Combination switch
3 High beam flasher (high beam available
independent of exterior lamp switch position)
4 Turn signals, right
5 Turn signals, left
4
4
To signal minor directional changes, such as changing
lanes on a highway, move combination switch to the
point of resistance only and hold it there.
2
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
1
3
5
5
P54.25-2034-26
Turn signal failure
1 Low beam (exterior lamp switch position B)
If one of the turn signals fails, the turn signal indicator
system flashes and sounds at a faster than normal rate.
2 High beam (exterior lamp switch position B)
115
Combination switch
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Combination switch
7
0
I
Wiper off
Intermittent wiping
(optional rain sensor: One initial wipe, pauses
between wipes are automatically controlled by a
rain sensor monitoring the wetness of the
windshield.)
Notes:
With switch in this position, one wipe occurs
when turning the electronic main key in steering
lock from position 0.
6
P54.25-2033-26
Optional rain sensor:
6 Control for windshield wiper/washer system:
Do not leave in intermittent setting when vehicle
is taken to an automatic car wash or during
windshield cleaning. Wiper will operate in
presence of water spray at windshield, and wiper
may be damaged as a result.
Push briefly for single wipe without adding washer
fluid (use only when windshield is wet).
Push past detent and hold to activate wiper and
washer.
II Normal wiper speed
III Fast wiper speed
7 Windshield wiper
Notes:
The windshield washer reservoir, hoses and nozzles are
automatically heated.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
Windshield wiper smears
Hazard warning flasher switch
If the windshield wiper smears the windshield, even
during rain, activate the washer system as often as
necessary. The fluid in the washer reservoir should be
mixed in the correct ratio, see page 259.
Blocked windshield wiper
If the windshield wiper becomes blocked (for example,
due to snow), switch off the wiper.
For safety reasons before removing ice or snow, remove
electronic key from steering lock. Remove blockage.
Activate combination switch again (electronic key in
steering lock position 1).
The hazard warning flasher can be activated with the
switch located in the dashboard.
To activate hazard warning flasher, press switch once.
To deactivate, press switch again.
Note:
With the hazard warning flasher activated, the
combination switch in position for either left or right
turn, and the electronic main key in steering lock
position 2, only the respective left or right side turn
signals will operate.
117
Hazard warning flasher
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Automatic climate control
Automatic climate control
3
3
4
1
2
5
118
P83.40-2157-29
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Air volume control for center air outlets, turn wheel
The temperature selector should be left at the desired
temperature setting. The temperature selected is
reached as quickly as possible.
up to open.
2 Air volume control for side air outlet.
To open air outlets: Turn wheel to position i.
3 Center air outlet, adjustable
The system will not heat or cool any quicker by setting a
higher or lower temperature.
The automatic climate control removes considerable
moisture from the air during operation in the cooling
mode. It is normal for water to drip on the ground
through ducts in the underbody.
4 Side air outlet, adjustable
5 Display and controls
The system is always at operational readiness, except
when manually switched off.
The desired interior temperature can be selected
separately for the left and right side of the passenger
compartment.
The automatic climate control only operates with the
engine running.
119
Automatic climate control
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Automatic climate control
Display and controls
P Defrost
O Air recirculation
F Rear window defroster
b Air distribution, manual
S Economy mode
ï Air volume, manual
T Residual engine heat utilization
0
MAX
Basic setting - automatic mode
Press left and right U button for automatic mode.
Simultaneously press both f and g buttons for
temperature setting of 72°F.
Press the desired button to activate, indicator lamp is on
while activated.
Q
U Automatic mode
f Raise temperature
g Lower temperature
Air volume and distribution are controlled
automatically.
This setting can be used all year around.
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Economy
Defrosting
Turn wheels (2) to position i to open left and right
side air outlets (4). Adjust side air outlets upward.
The function of this setting corresponds to the
automatic mode. However, because the air conditioning
compressor will not engage (fuel savings), it is not
possible to air condition in this setting.
Press P button. Maximum heated and automatically
controlled amount of air is directed to the windshield
and side windows.
Press S button to activate.
Press S button once again to return to previous
setting.
P
Press P button once again to return to previous
setting.
Special settings (use only for short duration)
Defogging windows
Switch off O button.
Press left and right U buttons.
Press button b repeatedly until air is directed
upward.
U
Turn wheels (2) to position i to open left and right
side air outlets (4). Adjust side air outlets upward.
121
Automatic climate control
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Air distribution
Car care
Index
Automatic climate control
Rear window defroster
Turn electronic key in steering lock to position 2.
To select, press F button.
T
requested symbol is displayed.
Press b button for each side repeatedly until the
To cancel, press F button again.
Press U button to return to automatic mode.
Notes:
Heavy accumulation of snow and ice should be removed
before activating the defroster.
Air volume
The rear window defroster consumes a large amount of
electrical power. To keep the battery drain to a
minimum, turn off the defroster as soon as the window
is clear.
Press – or + side of rocker switch ï until the
requested blower speed is attained. A choice of 7 blower
speeds is available.
To switch the automatic climate control off, press – side
The defroster is automatically turned off after a
maximum of 12 minutes of operation.
of rocker switch ï until symbol OFF is displayed.
If several power consumers are turned on
I
simultaneously, or the battery is only partially charged,
it is possible that the defroster will automatically turn
itself off. When this happens, the indicator lamp inside
the switch starts blinking.
The fresh air supply to the vehicle interior is shut off.
While driving, use this setting only temporarily,
otherwise the windshield could fog up.
To switch the automatic climate control on again, press
U, P or +side of ï.
As soon as the battery has sufficient voltage, the
defroster automatically turns itself back on.
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Air recirculation
Residual engine heat utilization
This mode can be selected to temporarily reduce the
entry of annoying odors or dust into the vehicle’s
interior.
With the engine switched off, it is possible to continue
heating the interior for a short while.
Air volume and distribution are controlled
automatically.
Outside air is not supplied to the vehicle’s interior.
To select, press O button.
To select:
To cancel, press O button again.
Turn electronic key in steering lock to position 1 or 0 or
remove key.
The system will automatically switch from recirculated
air to fresh air
Press T button
• after approx. 5 minutes at outside temperatures
This function selection will not activate if the battery
charge level is insufficient.
below approx. 40°F (5°C),
• after approx. 30 minutes at outside temperatures
above approx. 40°F (5°C),
To cancel:
• after approx. 5 minutes, if button S is pressed.
Press T button.
If the windows should fog up from the inside, switch
from recirculated air back to fresh air.
The system will automatically shut off
• if you turn electronic key in steering lock to
At high outside temperatures, the system automatically
engages the recirculated air mode thereby increasing
the cooling capacity performance, switching to partially
fresh air within 30 minutes.
position 2,
• after approx. 30 minutes,
• if the battery voltage drops.
123
Automatic climate control
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Automatic climate control
Dust filter
Nearly all dust particles and pollen are filtered out
before outside air enters the passenger compartment
through the air distribution system.
This vehicle is equipped with an air conditioner system
that uses R–134a (HFC: hydrofluorocarbon) as a
refrigerant. Repairs should always be performed by a
qualified technician, and refrigerant should be collected
in a recovery system for recycling.
Note:
Keep the air intake grille in front of windshield free of
snow and debris.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio and telephone, operation
Operating safety
Warning!
These instructions are intended to help you become
acquainted with your Mercedes-Benz vehicle radio.
They contain useful tips and a detailed description of
the user functions.
Any alternations made to electronic components
can cause malfunctions.
The radio, cassette deck, CD changer1 and
telephone1 are interconnected. Therefore, when
one of the components is defective or has not been
removed/replaced properly this may impair the
function of other components.
Warning!
In order to avoid distraction which could lead to an
accident, system settings should be entered with
the vehicle at standstill and systems should be
operated by the driver only when traffic conditions
permit. Always pay full attention to traffic
conditions first before operating system controls
while driving.
These malfunctions might seriously impair the
operating safety of your vehicle.
We recommend that you have any service work or
alternations on electronic components done in an
authorized Mercedes-Benz Center.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
1
Optional equipment
Dolby and the double-D symbol Ù are trademarks of Dolby
Laboratories Licensing Corporation. The Dolby noise reduction
system is manufactured under licence from Dolby Laboratories
Licensing Corporation.
The right to correct errors and make technical amendments is
reserved.
125
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
Operating and display elements
1 On/off, volume, see page 129
7 Display panel
The cassette slot is located behind the display panel.
For notes on playing cassettes, see page 133
2 Telephone mode selector, see page 140
3 Seek, see page 131, 134 and 138
4 Radio mode selector, see page 131
8 Alpha-numeric keypad for
station storage and frequency entry, see page 132
CD/Track access, see page 140
optional telephone, see page 139
5 Tune, see page 131and 132
Fast forward/reverse, see page 139
9 Function button, see page 132 and 139
6 CD mode selector, see page 133
126
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Soft keys for
radio band selection, see page 131
tone controls, see page 129
scan, see page 132
Tape eject, see page 134
Tape track select, see page 134
Dolby, see page 135
CD Random/repeat, see page 139
11 Tape mode selector, see page 133
Anti-theft system
If the power supply to the
radio has been interrupted,
“CODE” will appear on the
display when it is next
The code number is shown on the Radio code card,
supplied with the radio.
switched on. The radio will
only work after the five-digit code has been entered
using the buttons on the right-hand control panel.
Important!
Never leave the Radio code card in the vehicle. Keep it in
a safe place.
127
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
Entering the code number
Button and soft key operation
Switch on the radio. “CODE” will appear on the display.
Using the buttons on the alpha-numeric keypad, enter
the five digit code. Confirm by pressing the “OK” key.
In these instructions, the alpha-numeric keypad (right
side of radio face) and the function buttons (left side of
the radio face) are referred to as “buttons” and the four
keys under the display are referred to as “soft keys”.
If an incorrect code has been entered and confirmed,
“CODE” will reappear on the display. The correct code
must be entered once again.
Note:
Do not press directly on the radio display face.
If an incorrect code is entered
three times, “WAIT” will
appear on the display and the
radio will be locked out for
about 10 minutes.
Note:
The lock out time will only count down if the radio is left
switched on.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Audio functions
The AUD key is used to select the BASS, TREBLE and
BALANCE functions. Settings for bass and treble are
stored separately for the cassette and CD modes. Tone
level settings are identified by the vertical bars. The
center (flat) setting is shown by one longer bar in the
center of the display.
Switching on and off
Press the control knob
.
The radio is switched off when the ignition key is turned
to position 0 or removed from the ignition. The radio is
switched on again when the ignition key is turned to
position 1 or 2.
Bass
Note:
Press the AUD key repeatedly
until “BASS” appears in the
display.
The radio can also be switched on even if the ignition
key is not inserted, but will switch itself off
automatically after one hour to conserve vehicle battery
power.
Treble
Adjusting the volume
Press the AUD key repeatedly
until “TREBLE” appears in the
display.
Turn the control knob - turning the knob clockwise will
increase the volume, counterclockwise will decrease the
volume.
Press the “+” key to increase
or the “-” key to decrease the level.
129
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
Fader1
Centering all audio functions
Press the AUD key repeatedly
until “FADER” appears on the
display. Press the “R” key to
move the sound to the rear
speakers or the “F” key to
Push and hold down the
“AUD” key. All audio
functions (bass, treble,
balance and fader) are set to
center or flat positions, and
move the sound to the front speakers.
the volume is adjusted to a pre-set level.
Balance
Press the AUD key repeatedly
until “BALANCE” appears in
the display.
Press the “L” key to move the
sound to the left speaker or the “R” key to move the
sound to the right speaker.
1
not available on all models
130
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio mode
Manual tuning
Press either the
or
Selecting radio mode
button. Step-by-step tuning in
ascending or descending
order of frequency will take
place.
Press
button.
Selecting the band
The first three tuning steps will take place without
muting. The radio will then be muted and high-speed
tuning will take place until the button is released.
The following tuning intervals will be shown on the
display:
Press the key located below
the desired band. The band
selected is shown in the top
line of the display.
FM
AM
WB
200 kHz
10 kHz
Channels 1-7
Frequency ranges:
FM
87.9 - 107.9 MHz
530 - 1710 kHz
approx. 162 MHz
AM
WB
Seek tuning
Press either the
or
button. The radio will tune
to the next receivable station.
131
Audio system
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Storing stations
Car care
Index
Audio system
Scan tuning
Press the SC key. Each strong
receivable station on the band
selected will be tuned in for
8 seconds. The first scan will
tune only the stations with a
Hold the number button down for approximately
2 seconds. The currently displayed frequency is stored
on the selected station button. The storage procedure is
confirmed by a short signal tone.
high signal strength. The second scan will tune every
receivable station. By pressing either the
or buttons, or the “SC” key the scan mode
Retrieving a station from memory
,
,
Press the desired station button.
can be cancelled.
Direct frequency input (AM and FM only)
Station memory
Select the band. Press the
“ button and enter the
desired frequency using the
alpha-numeric keypad.
Frequencies outside of the
Ten stations can be stored in
the AM and FM bands via the
alpha-numeric keypad. The
“0” button corresponds to
location 10. Weatherband
frequency ranges (frequencies specified on page 133)
will not be accepted. The frequency input mode is
cancelled if no button is pressed within 4 seconds.
(WB) channels 1 to 7 can be retrieved via the alpha-
numeric keypad and are preset at the factory.
132
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette mode
Important!
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
Note:
Vehicles equipped with the COMAND system do not
come with a factory installed cassette mechanism.
A standard 1/8” stereo phono plug for auxiliary audio
input (located in glove box) is provided for connection of
a portable battery operated cassette player or any other
portable device which uses a headphone output. Please
refer to the COMAND operating manual for information
concerning the activation of the audio input.
The radio will switch to
cassette mode. Track 1 will be
played and “SIDE 1”
displayed. Track 1 is the side
of the cassette which is facing
upwards. The cassette deck will automatically detect the
type of tape and switch the equalization automatically.
A cassette symbol in the display indicates that a tape is
in the mechanism. This symbol appears in all modes but
not in cassette mode.
Playing cassettes
Press the “TAPE” button. When the eject (EJ) key is
pressed, the display folds down and the cassette slot
becomes visible. Push the cassette into the slot until it
engages. The cassette will be pulled in automatically.
The cassette will not be ejected when the radio is
switched off or another mode is selected.
Note:
If a cassette is in the
Do not press directly on the radio display face.
mechanism, cassette mode
can be selected by using the
“TAPE” button. If no cassette
has been inserted, the display
will show “NO TAPE”.
Return the display panel to its normal position by
folding it back up and pressing gently on the display
frame to lock in place.
133
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
Cassette eject
Track search forwards/backwards
Press the eject (EJ) key. The display will fold down and
the cassette will be ejected. Remove the cassette, then
fold the display back up manually. The radio will switch
back to radio mode automatically.
Press the
button.
“SEEK FWD” will be shown on
the display and the track
search will run the tape
forwards to the start of the
next track.
Note:
The cassette will not be ejected when the radio is
switched off.
Press the
“SEEK RWD” will be shown
button.
on the display and the track
search will run the tape
Important!
backwards to the start of the
track currently playing. Track search can be interrupted
by pressing the same button again.
If the display is in the down position for more than
20 seconds, 2 successive beeps will be heard. This will
continue at 5 second intervals until the display is
returned to its normal position.
Note:
The beginning of a track can only be located if there is a
break of at least 4 seconds between tracks.
Track selection
Press the track selection
(TRK) key. The current track
will be displayed as “SIDE 1”
or “SIDE 2”. The track will be
changed automatically at the
end of the tape.
134
Download from Www.Somanuals.com. All Manuals Search And Download.
Fast forward/reverse
Scanning
Press the
button.
Press the “SC” key. Each track
on the cassette will be played
for 8 seconds in ascending
order.
“FORWARD” will appear on
the display and fast forward
will start.
Press the
button.
Note:
“REWIND” will appear on the
display and fast reverse will
start.
The beginning of a track can only be located if there is a
break of at least 4 seconds between tracks.
Fast forward/reverse is stopped by pressing the same
button again, or it will stop automatically at the
beginning or the end of the tape. The track will
automatically change at the end or beginning of the tape
and play will begin.
Scan will be interrupted if the
buttons or the “SC” key is pressed.
,
,
,
Dolby NR1 (noise reduction system)
To enable optimum
reproduction of cassettes
recorded using the Dolby B
system, press the “AUD” key
followed by the NR key so the
“NR” in the display is not highlighted. To turn off
Dolby B noise reduction, press the “NR” key so the “NR”
in the display is highlighted.
1
Dolby and the double-D symbol
Ù
are trademarks of Dolby
Laboratories Licensing Corporation. The Dolby noise reduction
system is manufactured under licence from Dolby Laboratories
Licensing Corporation.
135
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
CD mode
Replace the CD in its container after use. Protect CDs
from heat and direct sunlight.
General notes on CD mode
Warning!
Should excessive temperatures occur while in CD mode,
“TEMP HIGH” will appear in the display and muting
will take place. The unit will then switch back to radio
mode until the temperature has decreased to a safe
operating level.
The CD changer1 is a Class 1 laser product. There is
a danger of invisible laser radiation if the cover is
opened or damaged.
Do not remove the cover. The CD changer1 does not
contain any parts which can be serviced by the
user. For safety reasons, have any service work
which may be necessary performed only by
qualified personnel.
Should temperatures occur while in CD mode which are
too low, “TEMP LOW” will be displayed, but the CD will
play. It will be sensitive to skipping if you are driving
over rough roads.
1
Optional equipment
Handle CDs carefully to prevent interference during
playback.
Avoid fingerprints and dust on CDs. Do not write on the
CDs or apply any label to the CDs.
Clean CDs from time to time with a commercially
available cleaning cloth. No solvents, anti-static sprays,
etc. should be used.
136
Audio system
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
CD changer installed
Loading/emptying the CD magazine
Slide the changer door to the right and press the eject
button . The magazine will be ejected. Remove the
magazine. Pull out the CD tray until its stop is reached
and place the CDs in the recess of the tray, label side up.
Push the tray into the magazine in the direction shown
by the arrow. Insert the loaded magazine into the
changer.
4
2
3
1
Important!
Close the door after the magazine has been inserted.
2
Playing CDs
Press the “CD” button. The CD most recently played will
start at the point where it was last switched off. CDs
stored in the magazine can be selected by using the
station preset buttons 1-6.
1 CD changer1
2 CD magazine
3 CD tray
The magazine slot number of
the selected CD will then be
displayed after “CD”. The
number of the track being
played will be displayed after
“TRACK”.
4 CD
If a CD changer1 is installed, it can be operated from the
front control panel of the radio. A loaded magazine must
be installed for CD playing.
137
1
Optional equipment
Download from Www.Somanuals.com. All Manuals Search And Download.
If there is no CD in the
selected magazine slot,
“NO CD” and the
corresponding slot number
will be displayed
Fast forward/reverse
Press the
forward.
button and hold it down for audible fast
Press the
reverse.
button and hold it down for audible
(e.g.“NO CD3”). After the last track on a CD has been
played, the next CD will automatically be selected and
played.
The search will stop when the
button is released. The
relative time of the track will
be displayed during the
search. The search mode will
cancel if the beginning or end of the CD is reached.
Skipping tracks forwards/backwards
Press the
played.
button. The next track on the CD will be
Press the
button. If the track has been playing for
Scanning
more than 10 seconds, it will revert to the start of that
track. If it has been playing for less than ten seconds it
will revert to the preceding track. To skip several tracks,
the respective button must be pressed until the desired
track is reached. If the beginning or end of the CD is
reached during the search, the first or last track will be
played.
Press the SC key. Each track will be played for 8 seconds
in ascending order. The search will stop at the track in
question if the
,
,
,
buttons or the
“SC” key is pressed.
138
Audio system
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Audio system
Random play/repeat function
Direct track selection
The tracks of the current CD are played in random order
when the random feature (RDM) is selected. Press the
RDM key to switch on, and press RDM again to switch
off.
Tracks can be selected directly using the buttons on the
alpha-numeric keypad. Press the “ function button,
followed by the track number.
When the repeat function
(RPT) has been selected, a
particular track can be played
for as many times as desired.
Press the RPT key to switch
on, and press RPT again to switch off.
Note:
Both functions cannot be used simultaneously.
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone operation
Entering telephone number and starting dialing
process
Various functions of the Mercedes-Benz integrated
cellular telephone1 can be performed and displayed via
the car radio. Further instructions for operating the car
telephone can be found in the operation guide for the
cellular telephone1.
Enter the desired telephone
number using the alpha-
numeric keypad. The number
can have up to 32 digits, but
only 13 of these can be
displayed. The dialing process is started by pressing the
SND button. The entered number can be corrected using
the “CLR” key.
Switching the telephone on and off
Switching on: Press the
button, “TEL” appears in the
corner of the display.
Press the CLR key briefly -
and the last digit will be
deleted.
Switching off: Press and hold
button until the telephone symbol “TEL” no
the
Press the CLR key longer - and
the complete number will be deleted.
longer appears in the display, or press the “PWR” button
on the phone’s keypad.
1
Optional equipment
Calling up the phone book
The numbers stored in the telephone memory can be
called up via either name or number entries. The
memory contents from the portable phone must be
downloaded and the telephone menu must be selected
in order to call up the phone book. Refer to the
“Memory download” section of the cellular telephone
operation guide for more information.
140
Audio system
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Placing a call
Car care
Index
Audio system
Switching between name search and number search
Press ABC key - Name search
When a number or a name
has been selected using the
method described above,
press the SND key.
Press NUM key - Number search
Searching and selecting phone book entries by name
Press the ABC key. The current name is shown on the
display. The stored entries in alphabetical order can be
Manual repeat dialing (redial)
The last number entered can be re-selected by pressing
the SND key once and the call can be placed by pressing
the SND key a second time. The last dialed telephone
number is shown on the display. Using the
or button, the numbers stored in the re-dial
memory of the telephone can be selected.
selected using the
or
button. By pressing the
or buttons, the stored entries can be selected
according to alphabetical initial letters (e.g. A-Adam,
B-Brown, M-Miller).
,
,
Searching and selecting phone book entries by
number
The abbreviation L and the
number in the memory are
shown in the top line of the
display.
Press the NUM key. The current number is shown on
the display. The stored entries can be selected in
numerical order using the
pressing the or
or
button. By
buttons, the stored entries
can be selected in increments of 5 (e.g. Entry no. 2,
Entry no. 7, etc.).
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Accepting incoming call in telephone mode
Component malfunctions
With an incoming call, the ringing tone will be heard
and the message “CALL” appears in the display. Press
the SND key to answer the call.
The radio, CD changer1, and Mercedes-Benz integrated
cellular telephone1 are part of a fiberoptic networked
system. Failure of one of the components can lead to
malfunctions of the other components. Please contact
your authorized Mercedes-Benz Center or call
1-800-FOR-MERCedes for more information in the event
of a malfunction.
Accepting incoming call in tape, CD or radio mode
If the telephone is activated in the background
(telephone symbol in the display), then a switch is made
automatically to telephone when an incoming call is
received. The audio source is muted, the ringing tone is
heard and the message “CALL” appears. After the call
has been terminated, the previously selected audio
source is resumed.
1
Optional equipment
Terminating call
A current call can be terminated by pressing the END
key.
142
Audio system
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Power windows
Turn electronic key in steering lock to position 1 or 2.
Press switch in to resistance point:
k to open
j to close
Release switch when window is in desired position.
Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
The closing procedure can be immediately reversed
by either pressing the switch k or pressing
button Πon the remote control, and holding it.
Power window switches are located on center console.
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
serious personal injury.
1 left, front
2 left, rear
3 right, front
4 right, rear
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Express opening and closing of door windows
Note:
Press switch k or j past resistance point and
release — window opens or closes completely.
The power windows can also be opened and closed with
the infrared remote control while locking the vehicle
doors or trunk, see page 32.
To interrupt procedure, briefly press k or j.
If the upward movement of the window is blocked
during the closing procedure, the window will stop
during the last few inches before closure and open
slightly.
Synchronizing power windows
If the power supply was interrupted (battery
disconnected or low), the windows cannot be opened by
the Express feature.
When pressing and holding the switch j to close the
window, and upward movement of the window is
blocked during the last few inches before closure, it will
stop but not open slightly.
To resynchronize the express feature, press j side of
power window switch until the window is completely
closed and hold for additional 2 seconds. Repeat
procedure for each window.
Warning!
The automatic full opening procedure of the windows
should now be restored.
When leaving the vehicle, always remove the
electronic key from the steering lock and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
serious personal injury.
144
Interior equipment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Power windows – operated with soft top switch
When leaving the vehicle, always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
serious personal injury.
The soft top handle must be in the locked position to
operate the power windows.
Turn electronic key in steering lock to position 1 or 2.
To open:
Lift soft top switch quickly twice and hold.
To close:
Soft top switch is located on center console.
Press soft top switch quickly twice and hold.
Release switch when windows are in desired position.
In addition to the power window switches, the windows
can also be opened or closed with the soft top switch.
Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
145
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior lighting
2 Press to switch interior and reading lamps on or off.
3 Press to switch reading lamp on or off.
2
4 Press to switch reading lamp on or off.
3
4
Entrance lamps, exit lamps in doors
1
The lamps are switched on and off by the door contact
switches.
Note:
To prevent the vehicle battery from being discharged,
with doors open all interior lamps go out after
approximately 5 minutes.
P68.00-2297-26
1 Automatic interior lighting
Press once and the automatic interior lighting is
activated.
Interior lamps are switched on, and off (soft fade)
delayed, when unlocking or locking the vehicle, or
when opening or closing a door. However, there will
be no (soft fade) delay when the electronic key is in
steering lock position 2.
Press again and interior lamps remain switched off,
even when centrally unlocking or opening a door.
146
Interior equipment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Sun visors
Illuminated vanity mirrors
Swing sun visors down to protect against sun glare.
With the visor engaged in its inner mounting, the lamp
is switched on by opening the cover.
If sunlight enters through a side window, disengage
visor from inner mounting, pivot it to the side, and slide
it to the desired position.
Warning!
Do not use the vanity mirror while driving.
The lamp goes out automatically after approximately
5 minutes.
147
Download from Www.Somanuals.com. All Manuals Search And Download.
Interior
Glove box
Warning!
To help avoid personal injury during a collision or
sudden maneuver, exercise care when stowing
things. Put luggage or cargo in the trunk if
possible. Do not pile luggage or cargo higher than
the seat backs. Do not place anything on the shelf
below the rear window.
1
2
3
Luggage nets cannot secure hard or heavy objects.
Storage compartments, armrest and cup holder
Warning!
P68.00-2067-26
Keep compartment lids closed. This will help to
prevent stored objects from being thrown about
and injuring vehicle occupants during an accident
and sudden maneuvers.
1 Unlocking: Turn mechanical key to vertical position
and remove.
2 Locking: Turn mechanical key to the right and
remove.
3 Opening: Pull on handle.
148
Interior equipment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Storage compartments in center console
Cup holder in center console
To open cup holder:
Briefly press button (7). The cup holder opens
automatically.
To open compartment in armrest:
Press button (4) and lift lid.
To store cup holder:
To open compartment under armrest:
Press button (5) and lift lid.
Push button (7) down until cup holder engages. Close
cover (6).
To close:
Lower lid until it engages in lock.
Caution!
Keep cup holder closed while traveling. Place only
containers that fit into the cup holder to prevent spills.
To open cover:
Touch top of cover (6) slightly. The cover opens
automatically.
149
Do not fill containers to a height where the contents
could spill during vehicle maneuvers, especially hot
liquids.
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Ashtray
Prior to removing the ashtray insert, move the gear
selector lever to position “N”.
Warning!
Remove front ashtray only with vehicle standing
still. With the gear selector lever in position “N”,
turn off the engine and set the parking brake.
Otherwise the vehicle might move as a result of
unintended contact with the gear selector lever.
To remove ashtray:
Push sliding knob (1) toward the right to eject the
insert.
To install ashtray:
Center console, front
Install insert into ashtray frame and push down to
engage.
By touching the bottom of the cover lightly, the ashtray
opens automatically.
150
Download from Www.Somanuals.com. All Manuals Search And Download.
Lighter
Turn electronic key in steering lock to position 1 or 2.
Push in lighter (1); it will pop out automatically when
hot.
Warning!
Never touch the heating element or sides of the
lighter, they are extremely hot, hold at knob only.
The lighter socket can be used to accommodate
electrical accessories up to maximum 85 W.
151
Interior equipment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Interior equipment
Cargo tie down rings
Parcel net in front passenger footwell
A small convenience parcel net is located in the front
passenger footwell. It is for small and light items, such
as road maps, mail, etc..
Warning!
Do not place heavy or fragile objects, or objects
having sharp edges, in the parcel net.
In an accident, during hard braking or sudden
maneuvers, they could be thrown around inside
the vehicle, and cause injury to vehicle occupants.
Note:
With large objects stored in the parcel net do not slide
the seat fully forward, it could damage them.
1 Ring
Carefully secure cargo by applying even load on all four
rings with rope of sufficient strength to hold down the
cargo.
Armrest, rear bench
Pull down the armrest by its top.
152
Download from Www.Somanuals.com. All Manuals Search And Download.
Cellular telephone
Telephone, general
Warning!
The vehicle is prepared for the installation of a cellular
telephone. For further information and installation
contact your authorized Mercedes-Benz Center.
A driver’s attention to the road must always be his/
her primary focus when driving. For your safety
and the safety of others, we recommend that you
pull over to a safe location and stop before placing
or taking a telephone call. If you choose to use the
telephone while driving, please use the hands-free
device and only use the telephone when road and
traffic conditions permit.
Warning!
Some jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle. Whether
or not prohibited by law, for safety reasons, the
driver should not use the cellular telephone while
the vehicle is in motion. Stop the vehicle in a safe
location before answering or placing a call.
Some jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
Never operate radio transmitters equipped with a
built-in or attached antenna (i.e. without being
connected to an external antenna) from inside the
vehicle while the engine is running. Doing so could
lead to a malfunction of the vehicle’s electronic
system, possibly resulting in an accident and
personal injury.
153
Telephone
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Garage door opener
Garage door opener
The built-in remote control is capable of operating up to
three separately controlled objects.
Warning!
When programming a garage door opener, the door
moves up or down.
When programming or operating the remote
control make sure there is no possibility of anyone
being harmed by the moving door.
2
1
Notes:
Certain types of garage door openers are incompatible
with the integrated opener. If you should experience
difficulties with programming the transmitter, contact
your authorized Mercedes-Benz Center, or call
Mercedes-Benz Client Assistance Center (in the USA
only) at 1-800-FOR-MERCedes, or Customer Service (in
Canada) at 1-800-387-0100.
3
1 Signal transmitter keys
2 Indicator lamp
3 Portable remote control transmitter
154
Download from Www.Somanuals.com. All Manuals Search And Download.
For operation in the USA only: This device complies
with Part 15, Subpart C, Section 209 of the FCC Rules.
Operation is subject to the following two conditions:
3. Using both hands, simultaneously push the hand-
held transmitter button and the desired integrated
remote control button. Do not release the buttons
until completing step 4.
(1) This device may not cause harmful interference, and
4. The indicator lamp on the integrated remote control
will flash, first slowly and then rapidly. When the
indicator lamp flashes rapidly, both buttons may be
released (the rapid flashing lamp indicates
successful programming of the new frequency
signal). To program the remaining two buttons,
follow steps 1 though 4.
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
WARNING: Changes or modification not expressly
approved by party responsible for compliance could void
the user’s authority to operate the equipment.
Programming or reprogramming the integrated
remote control:
Note:
If after repeated attempts, you do not successfully
program the integrated remote control device to learn
the signal of the hand-held transmitter, the garage door
opener could be equipped with the “rolling code
feature”.
1. Turn electronic key in steering lock to position 1
or 2.
2. Hold the end of the hand-held transmitter of the
device you wish to train approximately 2 to 5 inches
(5 cm to 12 cm) away from the surface of the
integrated remote control located on the inside rear
view mirror, keeping the indicator lamp in view.
155
Garage door opener
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Garage door opener
Rolling code programming:
3. Firmly press and release the programmed
integrated remote control transmit button. Press
and release same button a second time to complete
the training process. (Some garage door openers
may requires you to do this procedure a third time
to complete the training.)
To train a garage door opener (or other rolling code
devices) with the rolling code feature, follow these
instructions after completing the “Programming”
portion of this text. (A second person may make the
following training procedures quicker and easier.)
4. Confirm the garage door operation by pressing the
programmed button on the integrated remote
control transmitter.
1. Locate training button on the garage door opener
motor head unit. Exact location and color of the
button may vary by garage door opener brand. If
there is difficulty locating the transmitting button,
reference to garage door opener operator’s manual.
Canadian programming:
During programming, your hand-held transmitter may
automatically stop transmitting. Continue to press and
hold the integrated remote control transmitter button
(note steps 2 through 4 in the “Programming” portion)
while you press and re-press (“cycle”) your hand-held
transmitter every two seconds until the frequency
signal has been learned. The indicator lamp will flash
slowly and then rapidly after several seconds upon
successful training.
2. Press “training” button on the garage door opener
motor head unit (which activated the “training
light”).
Note:
Following step 2, there are 30 seconds to initiate
step 3.
156
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of remote control:
Erasing the remote control memory:
1. Turn electronic key in steering lock to position 1
or 2.
1. Turn electronic key in steering lock to position 1
or 2.
2. Select and press the appropriate button to activate
the remote controlled device. The integrated remote
control transmitter continues to send the signal as
long as the button is pressed – up to 20 seconds.
2. Simultaneously holding down the left and right side
buttons for approximately 20 seconds, or until the
control lamp blinks rapidly, will erase the codes of
all three channels.
157
Garage door opener
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Soft top
Soft top
• do not operate the luggage cover with the soft top
lowered. Doing so will result in damage to the
luggage cover or the soft top.
A minimum height clearance of 6 1/2 ft. (2 m) is
required to lower or raise the soft top.
Lowering a wet soft top can result in water reaching the
vehicle interior. The soft top should be dry when
lowering it into the soft top storage compartment.
The raising or lowering procedure can only be started
with the luggage cover and trunk lid closed.
The raising or lowering procedure is immediately
interrupted by releasing the soft top switch.
Do not lower a frozen soft top until thawed and dry.
Doing so may result in damage not covered by the
Mercedes-Benz Limited Warranty.
Do not operate the soft top while a trunk luggage carrier
is installed.
To prevent mildew, the soft top must be dry before
lowering it into the storage compartment.
To prevent damage to the soft top, soft top compartment
cover, trunk lid or luggage/cargo when lowering the
roof:
The soft top should not be lowered or raised at outside
temperatures below +5°F (-15°C), since the material
becomes less pliable with lower temperatures.
• load trunk only to the height of the luggage cover,
• do not permit luggage/cargo to raise the closed
Notes:
luggage cover,
Rear passengers should lean forward while raising or
lowering the soft top, to clear the path of the rear
window.
• do not load anything on top of the luggage cover,
• do not place anything on the soft top compartment
cover,
To prevent the soft top from being lowered
unintentionally while a trunk luggage carrier is
installed, keep luggage cover in trunk in the open
position with the soft top raised.
• do not open the trunk lid while the soft top is being
raised or lowered. This is required since the soft top
compartment cover moves upward and backward
during raising or lowering operations,
158
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Never lock or unlock the soft top while driving.
Doing so could cause the driver to lose control of
the vehicle.
2
1
Driving with an unlocked soft top may cause
personal injury to you or your passenger, or
personal injury or property damage to others.
1
Before operating the soft top switch make sure that
no persons due to inattention are injured by the
moving parts (roll bar, soft top frame and soft top
compartment cover).
P65.10-2081-26
Hands must never be placed near the roll bar, soft
top frame, upper windshield area or soft top storage
compartment while the soft top is being raised or
lowered. Serious personal injury may occur.
Important!
Do not manually move corner flaps (1) of soft top
compartment cover. Doing so will result in damage to
the soft top folding mechanism that is not covered by
the Mercedes-Benz Limited Warranty.
In case of danger release the switch to immediately
interrupt the operating procedure.
With the soft top lowered do not place anything on the
soft top compartment cover (2).
The soft top compartment cover must never be used by
any persons as a seat bench. Raising of the roll bar
could result in personal injury.
159
Soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Soft top
2
1
P77.30-2080-26
P77.30-2070-26
Lowering Soft Top
Important!
Push soft top frame approx. 8 inches (20 cm) upward by
the locking handle. Failing to do so will result in
damage to the soft top folding mechanism that is not
covered by the Mercedes-Benz Limited Warranty.
1. Engage parking brake.
2. Close luggage cover and trunk lid.
3. Turn electronic key in steering lock to position 2.
4. Press lock button (1) and fold down locking
handle (2).
Turn locking handle counterclockwise to the stop and
fold up until it locks in place.
5. Turn locking handle 90° clockwise to unlock the soft
• The indicator lamp in the soft top switch lights up.
top.
• The side windows lower.
160
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Lift symbol side of the soft top switch and hold:
• The roll bar lowers (when in the upper position).
• The soft top compartment cover and rear
window section of the soft top unlocks.
• The rear window section of the soft top raises.
• The soft top compartment cover opens.
• The soft top lowers into its storage compartment.
• The soft top compartment cover closes and
locks.
• The indicator lamp in the soft top switch goes
out – the lowering procedure is completed – a
signal sounds.
Notes:
If indicator lamp blinks slowly, a malfunction has
occurred in the system.
If the soft top switch is held or is released and lifted
again within approximately 2 seconds, the side
windows will close. If the roll bar was previously in the
upper position, it will return to that position.
If indicator lamp blinks rapidly, the trunk lid and/or
the luggage cover may be open, and need to be
closed.
The side windows can also be opened/closed later on.
Lift/press soft top switch twice and hold, see page 145.
However, the side windows and the roll bar can also be
activated using their respective switches, see page 143
and page 51.
161
Soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Soft top
4. Press symbol side of soft top switch and hold:
Warning!
• The indicator lamp in the soft top switch lights
To prevent possible accidents, drive the vehicle
only with the soft top either completely closed and
locked, or fully lowered into its storage
compartment.
up.
Notes:
If indicator lamp blinks slowly, a malfunction
has occurred in the system.
Note:
If indicator lamp blinks rapidly, the trunk lid
and/or the luggage cover may be open, and need
to be closed.
For safety reasons, the soft top cannot be lowered while
driving.
• The side windows lower.
Raising Soft Top
• The roll bar lowers (when in the upper position).
1. Engage parking brake.
• The soft top compartment cover unlocks and
2. Close luggage cover and trunk lid.
For notes on the luggage cover, see page 250.
3. Turn electronic key in steering lock to position 2.
opens.
• The soft top is raised from its storage
compartment to the closing position.
• The soft top storage compartment closes and the
rear window section of the soft top lowers – a
signal sounds.
162
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
P77.30-2035-26
5. Press lock button (1) and fold down locking
handle (2).
If the soft top switch is held or is released and pressed
again within approximately 2 seconds, the side
windows will close. If the roll bar was previously in the
upright position, it will return to that position.
6. Turn locking handle 90° clockwise and pull soft top
frame carefully down until it meets the windshield
header attachment points.
The side windows can also be closed/opened later on.
Press/lift soft top switch twice and hold, see page 145.
Turn locking handle counterclockwise to the stop to
lock the soft top.
However, the side windows and the roll bar can also be
activated using their respective switches, see page 143
and page 51.
Fold locking handle up until it locks in place.
The indicator lamp in the soft top switch goes out –
the lowering procedure is completed.
163
Soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Soft top
Note:
If the indicator lamp in the soft top switch blinks slowly
while activating the switch,
For safety reasons, the soft top cannot be raised while
driving.
• the battery voltage may be insufficient – start
engine and let it run while activating switch,
Warning!
• the system may be overheated (for example after
lowering or raising the soft top approx. 5
The soft top is not fully closed and locked:
consecutive times) – after approx. 10 minutes the
soft top switch may be activated again.
• if the indicator lamp in the soft top switch does
not got out (electronic key in steering lock
position 2).
If indicator lamp in the soft top switch blinks rapidly
while activating the switch,
• if the indicator lamp blinks, and a signal
sounds for 10 seconds when starting to drive.
• the trunk lid and/or the luggage cover may be open,
and need to be closed,
Stop the vehicle and before continuing to drive,
close and lock the soft top.
• the soft top is still locked during the opening
If the soft top is not locked, it may fold back or
forward when driving.
procedure and needs to be unlocked,
• the opening/closing procedure is interrupted.
During soft top operation, do not place your hands
near the roll bar, soft top frame, upper windshield
area or soft top storage compartment. Serious
personal injury may occur.
If the indicator lamp continues to blink, raise the soft
top manually, see page 280.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
To prevent possible accidents, drive the vehicle
only with the soft top either completely closed and
locked, or fully lowered into its storage
compartment.
164
Download from Www.Somanuals.com. All Manuals Search And Download.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
Wind screen (optional)
Notes:
2
If the roll bar was raised automatically, the process of
raising or lowering the soft top will take somewhat
longer, as the roll bar must first be lowered.
Whenever possible, park vehicle in the shade as
continuous exposure to sun rays can prematurely
deteriorate the soft top material.
1
The soft top may become moldy and receive permanent
creases if it is kept in the storage compartment for an
extended period.
P65.00-2016-26
Therefore, we recommend raising and airing it
thoroughly with the side windows open (do not expose
it to the sun) at regular intervals during the wet and
cold seasons.
The wind screen is most effective when all four side
windows are fully raised.
Installation
To prevent damage, the soft top must be dry and clean
before lowering it into the storage compartment. There
is the possibility of sharp-edged dirt particles damaging
the soft top or scratching the rear window.
1. Remove wind screen from its storage bag, located in
the trunk, secured with hook and loop fasteners,
and unfold.
2. Pull folded end sections in direction of arrow (1) and
unfold in direction of arrow (2).
165
Soft top
169
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
6
3
4
5
P65.00-2039-26
P65.00-2009-26
Important!
Removal
The open end of the hooks must point toward the
vehicle’s front.
3. Insert end section in right opening (3) on quarter
panel first. Then push left end section toward
vehicle center (arrow 4) until it meets the left
opening. Insert end section in left opening (5).
Push left and right side buttons and remove wind
screen upward.
Warning!
To prevent personal injury, remove wind screen if
rear seats are to be occupied by passengers.
Push down on wind screen (6) until it locks in place.
166
Wind screen
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller Blind (horizontal)
Storing
1
2
2
1
3
P65.00-2011-26
P65.00-2049-26
Pull end sections in direction of arrow (1) and fold in
direction of arrow (2).
To open blind:
Place wind screen in its storage bag, and close the bag.
Pull out blind on tab (arrow 1) towards vehicles rear.
Insert guide rod of blind in right rear seat belt outlet
(arrow 2).
Place bag in trunk, and secure it with the provided hook
and loop fasteners.
When the wind screen is not in use, it should be stored
in the closed storage bag, to prevent possible damage to
the wind screen or luggage/cargo.
To retract blind:
Hold blind at tab, disengage and guide retraction.
167
Wind screen
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller Blind (vertical)
To open blind:
1. Fold driver and front passenger seat backrests
forward.
2. Pull out on tab, located below rear bench, towards
vehicle’s front, then pull up and engage blind at
wind screen.
To close blind:
1. Fold driver and front passenger seat backrests
forward.
2. Hold blind at tab, disengage and guide its retraction.
P65.00-2018-26
168
Wind screen
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Parking
195
Driving
Tires
Snow chains
Winter driving instructions
Deep water
Passenger compartment
Travelling abroad
Cruise control
Brake assist system (BAS)
Antilock brake system (ABS)
Electronic stability program (ESP)
195
198
198
199
200
200
201
204
206
208
211
213
Control and operation of radio transmitters
The first 1 000 miles (1 500 km)
Maintenance
Catalytic converter
Emission control
Tele Aid
170
171
171
172
173
174
180
182
183
192
192
192
193
193
193
193
194
Steering lock
Starting and turning off the engine
Automatic transmission
Parking brake
Driving instructions
Drive sensibly – save fuel
Drinking and driving
Pedals
Power assistance
Brakes
Driving off
What you should know at the gas station
Check regularly and before a long trip
169
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Control and operation of radio transmitters
Control and operation of radio transmitters
COMAND, radio and telephone
Telephones and two-way radio
Warning!
Warning!
Please do not forget that your primary
responsibility is to drive the vehicle. Only operate
the COMAND (Cockpit Management and Data
System), radio or telephone1 if road and traffic
conditions permit.
Never operate radio transmitters equipped with a
built-in or attached antenna (i.e. without being
connected to an external antenna) from inside the
vehicle while the engine is running. Doing so could
lead to a malfunction of the vehicle’s electronic
system, possibly resulting in an accident and
personal injury.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is covering
a distance of approximately 50 feet (approximately
14 m) every second.
Radio transmitters, such as a portable telephone or a
citizens band unit should only be used inside the
vehicle if they are connected to an antenna that is
installed on the outside of the vehicle.
1
Observe all legal requirements.
Refer to the radio transmitter operation instructions
regarding use of an external antenna.
170
Download from Www.Somanuals.com. All Manuals Search And Download.
The first 1 000 miles (1 500 km)
Maintenance
The more cautiously you treat your vehicle during the
break-in period, the more satisfied you will be with its
performance later on. Therefore, drive your vehicle
during the first 1 000 miles (1 500 km) at moderate
vehicle and engine speeds.
Approximately 30 days or 2 000 miles ( 2000 km) prior
to the next recommended service, the remaining
distance or days are displayed in the multifunction
indicator. See Flexible service system (FSS) on
page 107.
During this period, avoid heavy loads (full throttle
driving) and excessive engine speeds.
We strongly recommend that you have your vehicle
serviced by your authorized Mercedes-Benz Center, in
accordance with the Service Booklet at the times called
for by the FSS.
Avoid accelerating by kickdown. It is not recommended
to brake the vehicle by manually shifting to a lower gear.
We recommend that you select positions “3”, “2” or “1”
only at moderate speeds (for hill driving).
Failure to have the vehicle maintained in accordance
with the Service Booklet at the designated times/
mileage may result in vehicle damage not covered by
the Mercedes-Benz Limited Warranty.
After 1 000 miles (1 500 km) speeds may be gradually
increased to the permissible maximum.
Check regularly and before a long trip, see page 213.
171
The first 1 000 miles
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Caution!
Car care
Index
Catalytic converter
Catalytic converter
Your Mercedes-Benz is equipped with monolithic type
catalytic converters, an important element in
To prevent damage to the catalytic converters, use only
premium unleaded gasoline in this vehicle.
conjunction with the oxygen sensors to achieve
substantial control of the pollutants in the exhaust
emissions. Keep your vehicle in proper operating
condition by following our recommended maintenance
instructions as outlined in your Service Booklet.
Any noticeable irregularities in engine operation should
be repaired promptly. Otherwise, excessive unburned
fuel may reach the catalytic converter causing it to
overheat, which could start a fire.
Warning!
As with any vehicle, do not idle, park or operate
this vehicle in areas where combustible materials
such as grass, hay or leaves can come into contact
with the hot exhaust system, as these materials
could be ignited and cause a vehicle fire.
172
Download from Www.Somanuals.com. All Manuals Search And Download.
Emission control
Warning!
Certain systems of the engine serve to keep the toxic
components of the exhaust gases within permissible
limits required by law.
Inhalation of exhaust gas is hazardous to your
health. All exhaust gas contains carbon monoxide,
and inhaling it can cause unconsciousness and
lead to death.
These systems, of course, will function properly only
when maintained strictly according to factory
Do not run the engine in confined areas (such as a
garage) which are not properly ventilated. If you
think that exhaust gas fumes are entering the
vehicle while driving, have the cause determined
and corrected immediately. If you must drive under
these conditions, drive only with at least one
window fully open.
specifications. Any adjustments on the engine should,
therefore, be carried out only by qualified Mercedes-
Benz authorized center technicians. Engine adjustments
should not be altered in any way. Moreover, the
specified service jobs must be carried out regularly
according to Mercedes-Benz servicing requirements.
For details refer to the Service Booklet.
173
Emission control
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tele Aid
Emergency calls
Tele Aid
An emergency call is initiated automatically
The electronic key in the steering lock must be in position
1 or 2 for the Tele Aid to be operational.
following an accident in which the Emergency
Tensioning Retractors (ETR’s) or airbags deploy,
An emergency call can also be initiated manually by
opening the cover next to the inside rear view mirror
labeled “SOS”, then pressing the button (for longer than
Important!
The initial activation of the Tele Aid system may only be
performed by completing the subscriber agreement and
placing an acquaintance call using the “SOS” button.
Failure to complete either of these steps will result in a
system that is not activated.
Once the emergency
lamp in the “SOS”
2 seconds) located under the cover.
call is in progress, the indicator
All information relevant to the
button will begin to flash.
emergency, such as the location of the vehicle
(determined by the GPS satellite location system),
vehicle model, identification number and color are
generated.
If you have any questions regarding activation, please
call the Response Center at 1-800-756-9018 (in the USA)
or 1-888-923-8367 (in Canada).
A voice connection between the Response Center and
the occupants of the vehicle will be established
automatically soon after the emergency call has been
(Telematic Alarm Identification on Demand)
The Tele Aid system consists of three types of response;
automatic and manual emergency, roadside assistance
and information.
The Response Center will attempt
initiated.
to determine more precisely the nature of the accident
provided they can speak to an occupant of the vehicle.
174
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tele Aid
The Tele Aid system is available if:
Initiating an emergency call manually
• it has been activated and is operational. Activation
requires a subscription for monitoring services and
cellular air time,
• the relevant cellular phone network and GPS signals
are available and pass the information on to the
response center.
2
1
Note:
Location of the vehicle on a map is possible if the
vehicle is able to receive signals from the GPS satellite
network and pass the information on to the response
center.
P82.95-2114-26
Manually:
Briefly press on cover (1) – the cover will open.
Press the SOS button (2) briefly (for longer than
2 seconds). The indicator lamp in the SOS button (2)
will flash until the emergency call is concluded. Wait for
a voice connection to the Response Center.
175
Download from Www.Somanuals.com. All Manuals Search And Download.
In the event of an ETR or airbag deployment, if the
system cannot connect to the Emergency Response
Center, it will attempt to contact 9-1-1. Close the
cover (1) after the emergency call is concluded.
the connection is established, the message “ROADSIDE
ASSISTANCE – CALL CONNECTED” appears in the
multifunction display. The Tele Aid system will transmit
data generating the vehicle identification number,
model, color and location (subject to availability of
cellular and GPS signals).
Warning!
If you feel at any way in jeopardy when in the
vehicle (e.g. smoke or fire in the vehicle, vehicle in
a dangerous road location), please do not wait for
voice contact after you have pressed the emergency
button. Carefully leave the vehicle and move to a
safe location. The Response Center will
A voice connection between the Roadside Assistance
dispatcher and the occupants of the vehicle will be
established.
can then be described.
Sign and Drive services: Services such as jump start,
a few gallons of fuel or the replacement of a flat tire
The nature of the need for assistance
automatically contact local emergency officials
with the vehicle’s approximate location
.
with the vehicle spare tire are obtainable
services such as labor and/or towing charges
For
may apply. Refer to the Roadside Assistance manual
information.
for more
Roadside Assistance button •
Located below the center armrest cover is the Roadside
Assistance button •. Pressing and holding the
button (for longer than 2 seconds) will initiate a call to a
Mercedes-Benz Roadside Assistance dispatcher. The
button will flash while the call is in progress. The
message “ROADSIDE ASSISTANCE – CONNECTING
When
CALL” will appear in the multifunction display.
176
Tele Aid
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Information button ¡
“SOS”Roadside Assistance
The indicator lamp in the
s
s
for approx. 5
Information button
light up
and
Located below the center armrest cover is the
seconds after switching on the ignition.
Information button ¡. Pressing and holding the
button (for longer than 2 seconds) will initiate a call to
the Client Assistance Center. The button will flash while
Important!
the call is in progress.
The Tele Aid system will transmit
If the indicator lamps do not start flashing after
pressing one of the buttons or remain illuminated (in
red) at any time, the Tele Aid system has detected a fault
or the service is not currently active, and may not
initiate a call. Visit your Mercedes-Benz Center and
have the system checked or contact the Response Center
at 1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada) as soon as possible.
data generating the vehicle identification number,
model, color and location (subject to availability of
cellular and GPS signals).
A voice connection between the Client Assistance
Center representative and the occupants of the vehicle
Information regarding the
will be established.
operation of your vehicle, the nearest Mercedes-Benz
Center or Mercedes-Benz USA products and services is
available to you.
Upgrade Signals
If you have chosen the Route Guidance Service (only USA)
your communication will be transferred to our Emergency
Response Center, who will provide the appririate information.
Tele Aid system processes calls using the following
priority.
• Automatic emergency
• Manual emergency
• Roadside assistance
• Information
For more details concerning this optional service, please
contact the Emergency Response Center at 1-800-756-9018.
The Tele Aid system is operational one the electronic
key in steering lock is turned to position 1 or 2.
177
Tele Aid
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tele Aid
Should a higher priority call be initiated while you are
connected, an upgrade (alternating) tone will be heard,
and the appropriate indicator lamp will flash. If certain
information such as vehicle identification number or
client information is not available, the operator may
need to retransmit. During this time you will hear a
chirp and voice contact will be interrupted. Voice
contact will resume once the retransmission is
completed. Once a call is concluded, a chirp will be
heard and the appropriate indicator lamp will stop
flashing. The COMAND system operation will resume
(only vehicles with COMAND).
Notes:
The indicator lamp in the respective button flashes until
the call is concluded. Calls can only be terminated by a
Response Center or Client Assistance Center
representative
.
When a Tele Aid call has been initiated, the audio
system or the COMAND system audio (only vehicles
with COMAND) is muted and the selected mode (radio,
tape or CD) pauses. The optional cellular phone (if
installed) switches off. If you must use this phone, the
vehicle must be parked. Disconnect the coiled cord and
place the call. The navigation system (if engaged) will
continue to run. The display in the instrument cluster is
available for use and spoken commands are only
available by pressing the RPT button on the COMAND
unit. A pop-up window will appear in the COMAND
display to indicate that a Tele Aid call is in progress.
Important!
If the indicator lamp continues to flash or the system
does not reset, contact the Response Center at
1-800-756-9018 (in the USA) or 1-888-923-8367 (in
Canada), or Mercedes-Benz Client Assistance at
1-800-FOR-MERCedes (1-800-367-6372) in the USA or
Customer Service at 1-800-387-0100 in Canada.
178
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle location service
Should you wish to locate your vehicle, contact the Emergency Response Center at 1-800-756-9018.
You will be asked to provide your personal identifier witch you selected as part of your customer subscriber
agreement.
The Center will then attempt to covertly contact the vehicle’s Tele Aid system. The electronic key in the steering lock
must be in position 1 or 2 and the cellular and GPS signals must be available. The Center will attempt to contact the
vehicle until located, up to a maximum of 14 day until the vehicle location incident report is cancelled by you.
Caution !
The Tele Aid system cannot initiate a call if there is insufficient voltage (if the battery is disconnected, damaged or
deeply discharged). Should this occur, assistance must be summoned by other means.
Important!
Tele Aid utilizes the cellular network for communication and the GPS (Global Positioning System) satellites for
vehicle location. If either of these signals are unavailable, the Tele Aid system may not function and if this occurs,
assistance must be summoned by other means.
179
Tele Aid
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Steering lock
Steering lock
1 Steering is unlocked.
(If necessary, move steering wheel slightly to allow
the electronic key to be turned clockwise to
position 1.) Most electrical consumers can be
operated. For detailed information see respective
subjects.
2 Driving position.
3 Starting position.
See page 182for starting and turning off the engine.
Warning!
When leaving the vehicle always remove the
electronic key from the steering lock, and lock the
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may cause
serious personal injury.
0 The electronic key can be withdrawn in this position
only. The steering is locked when the electronic key
is removed from the steering lock. If necessary,
move steering wheel slightly to allow the locking
mechanism to engage. The electronic key can only
be removed with the selector lever in position “P”.
After removing the electronic key or with the
electronic key in steering lock position 0, the
selector lever is locked in position “P”.
180
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Notes:
A warning sounds when the driver’s door is opened
while the electronic key is in steering lock position 1
or 0.
If the electronic key is left in the steering lock position 0
for an extended period of time, it can no longer be
turned in the lock. In this case, remove electronic key
from steering lock and reinsert.
With the engine at idle speed, the charging rate of the
alternator (output) is limited.
Caution!
It is therefore recommended that you turn off
unnecessary electrical consumers while driving in stop-
and-go traffic. This precaution helps to avoid draining of
the battery.
To prevent accelerated battery discharge and a possible
dead battery, always remove the electronic key from the
steering lock. Do not leave the electronic key in steering
lock position 0.
Unnecessary strain on the battery and charging system
may be minimized by turning off the following power
consumers, for example: Heated seats, rear window
defroster. In addition, the automatic climate air volume
control should be set to the lowest position.
The steering lock can only be unlocked with the vehicle
battery properly charged and connected.
181
Steering lock
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Starting and turning off the engine
Starting and turning off the engine
Due to the installed starter non-repeat feature, the
electronic key must be turned completely to the left
before attempting to start the engine again.
Before starting
Ensure that parking brake is engaged and that selector
lever is in position “P” or “N”. Turn electronic key in
steering lock to position 2.
In areas where temperatures frequently drop below -4°F
(-20°C) we recommend that an engine block heater be
installed. Your authorized Mercedes-Benz Center will
advise you on this subject.
Starting
Do not depress accelerator.
Turning off
Briefly turn electronic key in steering lock clockwise to
the stop and release. The starter will engage until the
engine is running.
Turn the electronic key in the steering lock to position 0
to stop the engine.
The electronic key can only be removed with the
selector lever in position “P”.
If engine will not run, and the starting procedure stops,
turn electronic key completely to the left and repeat
starting the engine.
After several unsuccessful attempts, have the system
checked at the nearest authorized Mercedes-Benz
Center.
182
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission
The automatic transmission selects individual gears
automatically, dependent upon
• Selector lever position
• Program mode selector
• Accelerator position
• Vehicle speed
The gear shifting process is continuously adapted,
dependent on the driving style, the driving situation
and the road characteristics.
Important!
When parking the vehicle or before working on the
vehicle with the engine running, firmly depress the
parking brake pedal and shift the selector lever into “P”.
183
Automatic transmission
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Important!
Car care
Index
Automatic transmission
Driving
The selector lever is automatically locked while in
position “P”. To move the selector lever out of
position “P”, the service brake pedal must be firmly
depressed before the shift lock will release.
After selecting any driving position from “N” or “P”,
wait a moment to allow the gear to fully engage before
accelerating, especially when the engine is cold.
Shift selector lever to the desired position only when the
engine is idling normally and the service brake is
applied. Do not release the brake until ready to drive.
The vehicle may otherwise start creeping when the
selector lever is in drive or reverse position.
Accelerator position
Partial throttle = early upshifting = normal acceleration
Full throttle = later upshifting = rapid acceleration
Kickdown (depressing the accelerator beyond full
throttle) = downshifting to a lower gear = maximum
acceleration. Once the desired speed is attained, ease up
on the accelerator – the transmission shifts up again.
Warning!
It is dangerous to shift the selector lever out of “P”
or “N” if the engine speed is higher than idle speed.
If your foot is not firmly on the brake pedal, the
vehicle could accelerate quickly forward or in
reverse. You could lose control of the vehicle and
hit someone or something. Only shift into gear
when the engine is idling normally and when your
right foot is firmly on the brake pedal.
184
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping
Rocking a vehicle free in this manner may cause the
ABS or traction system malfunction indicator lamp to
come on. Turn off and restart the engine to clear the
malfunction indication.
For brief stops, e.g. at traffic lights, leave the
transmission in gear and hold vehicle with the service
brake.
For longer stops with the engine idling, shift into “N”
or “P” and hold the vehicle with the service brake.
Warning!
Getting out of your vehicle with the selector lever
not fully engaged in position “P” is dangerous.
Also, when parked on an incline, position “P” alone
may not prevent your vehicle from moving,
possibly hitting people or objects.
When stopping the vehicle on an uphill gradient, do not
hold it with the accelerator, use the brake. This avoids
unnecessary transmission heat build up.
Always set the parking brake in addition to shifting
to position “P”, see page 204 for parking brake.
Maneuvering
To maneuver in tight areas, e.g. when pulling into a
parking space, control the vehicle speed by gradually
releasing the brakes. Accelerate gently and never
abruptly step on the accelerator.
When parked on an incline, also turn front wheel
against curb.
To rock a vehicle out of soft ground (mud or snow),
alternately shift from forward to reverse, while applying
slight partial throttle.
185
Automatic transmission
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Automatic transmission
Selector lever position
Park position
The park position is to be used when parking the
vehicle. Engage only with the vehicle stopped.
The park position is not intended to serve as a
brake when the vehicle is parked. Rather, the
driver should always use the parking brake in
addition to placing the selector lever in park to
secure the vehicle.
Note:
The electronic key can only be removed from the
steering lock with the selector lever in
position “P”. With the electronic key removed, the
selector lever is locked in position “P”.
With a malfunction in the vehicle’s electrical
system the selector lever could remain locked in
position “P”. To unlock the selector lever
The current selector lever position is indicated in the
gear range indicator display. The automatic gear
shifting process can be adapted to specific operating
conditions using the selector lever.
manually, see page 268
Reverse gear
Shift to reverse gear only with the vehicle
stopped.
186
Download from Www.Somanuals.com. All Manuals Search And Download.
Dependent on the program mode selector switch
position “S” or “W” the maximum speed in the
reverse gear is different. However, it is not
possible to change the program mode while in
reverse.
Gear selection for special circumstances
The transmission gear ranges for special circumstances
can be selected by pressing the selector lever to the
right or the left with the selector lever in position “D”.
The gear range currently selected is indicated in the
instrument cluster display.
Neutral
No power is transmitted from the engine to the
drive axle. When the brakes are released, the
vehicle can be moved freely (pushed or towed). Do
not engage “N” while driving except to coast
when the vehicle is in danger of skidding (e.g. on
icy roads, see winter driving instructions on
page 198).
Briefly press selector lever in the ç direction:
The transmission downshifts, one gear at a time, in the
order D, 4, 3, 2, 1.
Press and hold selector lever in the ç direction:
The selector lever position display will switch to the
gear range currently selected by the automatic
transmission.
The transmission will only shift down one gear if the
gear range currently selected has already shifted to its
highest possible gear.
Important!
Coasting the vehicle, or driving for any other
reason with selector lever in “N” can result in
transmission damage that is not covered by the
Mercedes-Benz Limited Warranty.
Briefly press selector lever in the æ direction:
The transmission will shift from the current gear range
to the next higher gear range. If the transmission is
already in gear range “D”, an additional upshift of one
gear is possible.
The transmission automatically upshifts through
5th gear. Position “D” provides optimum driving
characteristics under all normal operating
conditions.
187
Automatic transmission
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Automatic transmission
Press and hold selector lever in the æ direction:
The transmission will shift from the current gear
directly to gear range “D”.
During the brief warm-up period this delayed upshift
and increased engine noise might be perceived as a
malfunction. However, neither the engine nor
transmission are negatively affected by this mode of
operation.
Warning!
The delayed upshift is effective with vehicle speeds
below 31 mph (50 km/h) at partial throttle and engine
temperatures below 95°F (35°C).
On slippery road surfaces, never downshift in order
to obtain braking action. This could result in drive
wheel slip and reduced vehicle control. Your
vehicle’s ABS will not prevent this type of loss of
control.
To avoid overrevving the engine when the selector lever
is moved to a lower gear range, the transmission will not
shift to a lower gear, if the engine’s revolutions per
minute limit would be exceeded. In this case there will
be no downshift, even when the vehicle speed reaches
the engine’s RPM limit of that gear, e.g. by applying the
service brakes.
Important!
With transmission in gear range “D”, “4” or “3”,
upshifting from 1st to 2nd to 3rd gear is delayed
depending on vehicle speed and engine temperature.
This allows the catalytic converter to heat up more
quickly to operating temperatures.
To prevent the engine from laboring at low RPM when
driving uphill gradients or with your vehicle heavily
loaded, the automatic transmission will downshift when
necessary to maintain engine RPM within the best
torque range.
188
Download from Www.Somanuals.com. All Manuals Search And Download.
Gear ranges:
Upshift through 4th gear only. Suitable for
Upshift through 2nd gear only. For driving in
mountainous regions or under extreme operating
conditions. This gear selection will allow use of
the engine’s braking power when descending
steep grades.
performance driving.
Upshift through 3rd gear only. Suitable for
moderately steep hills. Since the transmission
does not shift higher than 3rd gear, this gear
selection will allow use of the engine’s braking
power downhill.
Use this position, which makes maximum use of
the engine’s braking effect, while descending
very steep or lengthy downgrades and only at
speeds below 40 mph (60 km/h).
189
Automatic transmission
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Automatic transmission
Program mode selector switch
Accelerator Operation:
Fast on = depressing the accelerator pedal quickly
(not into kickdown position) while driving
continuously, rather than depressing the
accelerator pedal in the usual manner, will cause
the automatic transmission to shift down into a
lower gear. This gear shifting process is
dependent on the current vehicle speed.
Fast off = there will be no upshift when releasing
the accelerator pedal quickly, e.g. using the
engine’s braking power during performance
driving.
1
W
Winter/Wet (snow and ice) mode
Press switch on symbol “W”. The vehicle starts
out in 2nd gear, except with selector lever in 1st
gear, or with accelerator pedal in kick-down
position.
The transmission is provided with a selector switch (1)
for Standard “S” and Winter/Wet (snow and ice) “W”
program modes.
The “W” mode helps to improve traction and
driving stability of the vehicle.
S
Standard mode
Press switch on symbol “S”. Use this mode for all
regular driving.
The gear shifting process occurs at lower vehicle
and engine speeds than in the “S” program mode.
The vehicle starts out in 1st gear.
190
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution!
In this mode only the 2nd gear or reverse gear can be
activated.
Never change the program mode when the selector lever
is out of position “P”. It could result in a change of
driving characteristics for which you may not be
prepared.
To engage 2nd gear or reverse:
1. Stop the vehicle.
2. Move selector lever to position “P”.
3. Turn off the engine.
Important!
Always be certain of the program mode selected since
the vehicle driving characteristics change with the
selection of the program mode.
4. Wait approx. 10 seconds.
5. Restart the engine.
Dependent on the program mode selector switch
position “S” or “W” and the gear selector lever in
position “R”, the ratio of power transmission changes.
6. Move selector lever to position “D” (for 2nd gear), or
move selector lever to position “R” (for reverse gear).
Have the transmission checked at your authorized
Mercedes-Benz Center as soon as possible.
Emergency operation (Limp home mode)
If vehicle acceleration worsens or the transmission no
longer shifts, the transmission is most likely operating
in Limp home mode which engages when there is a
malfunction of the transmission. This condition may be
accompanied by the “CHECK ENGINE” malfunction
indicator lamp in the instrument cluster coming on.
191
Automatic transmission
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Parking brake
Parking brake
Driving instructions
Drive sensibly – save fuel
Fuel consumption, to a great extent, depends on driving
habits and operating conditions.
To save fuel you should:
• keep tires at the recommended inflation pressures,
• remove unnecessary loads,
• allow engine to warm up under low load use,
• avoid frequent acceleration and deceleration,
• have all maintenance work performed at regular
intervals by an authorized Mercedes-Benz Center.
To engage, firmly depress parking brake pedal. When
the electronic key is in steering lock position 2, the
brake warning lamp in the instrument cluster should
come on brightly.
Fuel consumption is also increased by driving in cold
weather, in stop-and-go traffic, on short trips and in hilly
country.
To release the parking brake, pull handle on instrument
panel. The brake warning lamp in the instrument
cluster should go out.
A warning sounds, if you start to drive without having
released the parking brake.
192
Also see brake warning lamp on page 217.
Download from Www.Somanuals.com. All Manuals Search And Download.
Power assistance
Warning!
Drinking and driving
Warning!
When the engine is not running, the brake and
steering systems are without power assistance.
Under these circumstances, a much greater effort is
necessary to stop or steer the vehicle.
Drinking or taking drugs and driving can be a very
dangerous combination. Even a small amount of
alcohol or drugs can affect your reflexes,
perceptions and judgement.
The possibility of a serious or even fatal accident is
sharply increased when you drink or take drugs
and drive.
Brakes
Please don’t drink or take drugs and drive or allow
anyone to drive after drinking or taking drugs.
Warning!
After driving in heavy rain for some time without
applying the brakes or through water deep enough
to wet brake components, the first braking action
may be somewhat reduced and increased pedal
pressure may be necessary to obtain expected
braking effect. Be sure to maintain a safe distance
from vehicles in front.
Pedals
Warning!
Keep driver’s foot area clear at all times. Objects
stored in this area may impair pedal movement.
Resting your foot on the brake pedal will cause
excessive and premature wear of the brake pads.
It can also result in the brakes overheating thereby
significantly reducing their effectiveness. It may
not be possible to stop the vehicle in sufficient time
to avoid an accident.
193
Driving instructions
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Caution!
Car care
Index
Driving instructions
When driving down long and steep grades, relieve the
load on the brakes by shifting into a lower gear to use
the engine’s braking power. This helps prevent
The condition of the parking brake system is checked
each time the vehicle is in the shop for the required
maintenance service.
overheating of the brakes and reduces brake pad wear.
If the parking brake is released and the brake warning
lamp in the instrument cluster stays on, the brake fluid
level in the reservoir is too low.
After hard braking, it is advisable to drive on for some
time, rather than immediately parking, so the air stream
will cool down the brakes faster.
Brake pad wear or a leak in the system may be the
reason for low brake fluid in the reservoir.
Driving off
Have the brake system inspected at an authorized
Mercedes-Benz Center immediately.
Apply the service brakes to test them briefly after
driving off. Perform this procedure only when the road
is clear of other traffic.
All checks and service work on the brake system should
be carried out by an authorized Mercedes-Benz Center.
Warm up the engine smoothly. Do not place full load on
the engine until the operating temperature has been
reached.
Install only brake pads and brake fluid recommended by
Mercedes-Benz.
When starting off on a slippery surface, do not allow one
drive wheel to spin for an extended period with the ESP
switched off. Doing so may cause serious damage to the
drive train which is not covered by the Mercedes-Benz
Limited Warranty.
Warning!
If other than recommended brake pads are
installed, or other than recommended brake fluid
is used, the braking properties of the vehicle can be
degraded to an extent that safe braking is
substantially impaired. This could result in an
accident.
194
Download from Www.Somanuals.com. All Manuals Search And Download.
Parking
Tires
Warning!
Warning!
To reduce the risk of personal injury as a result of
vehicle movement, before turning off the engine
and leaving the vehicle, always:
If you feel a sudden significant vibration or ride
disturbance, or you suspect that possible damage to
your vehicle has occurred, you should turn on the
hazard warning flashers, carefully slow down, and
drive with caution to an area which is a safe
distance from the roadway.
1. Keep right foot on the service brake pedal.
2. Firmly depress parking brake pedal.
3. Move the selector lever to position “P”.
4. Slowly release the service brake pedal.
5. Turn front wheels towards the road curb.
Inspect the tires and under the vehicle for possible
damage. If the vehicle or tires appear unsafe, have
it towed to the nearest Mercedes-Benz Center or
tire dealer for repairs.
6. Turn the electronic key to steering lock
position 0 and remove.
Tread wear indicators (TWI) are required by law. These
indicators are located in six places on the tread
circumference and become visible at a tread depth of
approximately 1/16 in (1.5 mm), at which point the tire is
considered worn and should be replaced.
7. Take the electronic key and lock vehicle when
leaving.
The tread wear indicator appears as a solid band across
the tread.
Important!
It is advisable to set the parking brake whenever
parking or leaving the vehicle. In addition, move
selector lever to position “P”.
When parking on hills, always set the parking brake.
195
Driving instructions
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving instructions
Specified tire pressures must be maintained. This
applies particularly if the tires are subjected to high
loads (e.g. high speeds, heavy loads, high ambient
temperatures).
Warning!
Do not drive with a flat tire. A flat tire affects the
ability to steer or brake the vehicle. You may lose
control of the vehicle. Continued driving with a flat
tire or driving at high speed with a flat tire will
cause excessive heat build-up and possibly a fire.
Aquaplaning
Warning!
Depending on the depth of the water layer on the road,
aquaplaning may occur, even at low speeds and with
new tires. Reduce vehicle speed, avoid track grooves in
the road and apply brakes cautiously in the rain.
Do not allow your tires to wear down too far. As
tread depth approaches 1/16 in (1.5 mm), the
adhesion properties on a wet road are sharply
reduced.
Depending upon the weather and/or road surface
(conditions), the tire traction varies widely.
196
Download from Www.Somanuals.com. All Manuals Search And Download.
Tire traction
Tire speed rating
The safe speed on a wet, snow covered or icy road is
always lower than on a dry road.
CLK 320:
Your vehicle is factory equipped with “H”-rated tires,
which have a speed rating of 130 mph (210 km/h).
You should pay particular attention to the condition of
the road whenever the outside temperatures are close to
the freezing point.
CLK 430:
Your vehicle is factory equipped with “W”-rated tires,
which are permissible for speeds up to 168 mph
(270 km/h).
Warning!
An electronic speed limiter prevents your vehicle from
exceeding a speed of 130 mph (210 km/h).
If ice has formed on the road, tire traction will be
substantially reduced. Under such weather
conditions, drive, steer and brake with extreme
caution.
Despite the tire rating, local speed limits should be
obeyed. Use prudent driving speeds appropriate to
prevailing conditions.
We recommend M+S rated radial-ply tires for the winter
season for all four wheels to insure normal balanced
handling characteristics. On packed snow, they can
reduce your stopping distance as compared with
summer tires. Stopping distance, however, is still
considerably greater than when the road is not snow or
ice covered.
Warning!
Even when permitted by law, never operate a
vehicle at speeds greater than the maximum speed
rating of the tires.
Exceeding the maximum speed for which tires are
rated can lead to sudden tire failure causing loss of
vehicle control and resulting in personal injury
and possible death.
197
Driving instructions
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving instructions
Snow chains
If the vehicle is parked after being driven on salt treated
roads, the braking efficiency should be tested as soon as
possible after driving is resumed while observing the
safety rules in the previous paragraph.
Road salts and chemicals can adversely affect braking
efficiency. Increased pedal force may become necessary
to produce the normal brake effect. We therefore
recommend depressing the brake pedal periodically
when traveling at length on salt-strewn roads. This can
bring road salt impaired braking efficiency back to
normal. A prerequisite is, however, that this be done
without endangering other drivers on the road.
Use only snow chains that are tested and recommended
by Mercedes-Benz. Your authorized Mercedes-Benz
Center will be glad to advise you on this subject.
Chains should only be used on the rear wheels. Follow
the manufacturer’s mounting instructions.
Snow chains should only be driven on snow covered
roads at speeds not to exceed 30 mph (50 km/h).
Remove chains as soon as possible when driving on
roads without snow.
When driving with snow chains, press the ESP control
switch to OFF, refer to page 209.
Winter driving instructions
Warning!
The most important rule for slippery or icy roads is to
drive sensibly and to avoid abrupt acceleration, braking
and steering maneuvers. Do not use the cruise control
system under such conditions.
If the vehicle becomes stuck in snow, make sure
that snow is kept clear of the exhaust pipe and
from around the vehicle with engine running.
Otherwise, deadly carbon monoxide (CO) gases may
enter vehicle interior resulting in unconsciousness
and death.
When the vehicle is in danger of skidding, move
selector lever to position “N”. Try to keep the vehicle
under control by corrective steering action.
To assure sufficient fresh air ventilation, open a
window slightly on the side of the vehicle not
facing the wind.
198
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving instructions
Winter driving
In winter operation, the maximum effectiveness of the
antilock brake system (ABS) or of the electronic stability
program (ESP) can only be achieved with M+S rated
radial-ply tires and/or snow chains recommended by
Mercedes-Benz. Snow chains maximize performance.
Have your vehicle winterized at your authorized
Mercedes-Benz Center before the onset of winter.
• Change the engine oil if the engine contains an oil
which is not approved for winter operation. For
viscosity (SAE/CCMC class) and filling quantity, see
page 307.
For driving instructions with snow chains, see page 198.
Deep water
Caution!
• Check engine coolant anticorrosion/antifreeze
concentration.
• Additive for the windshield washer and headlamp
cleaning system: Add MB Concentrate “S” to a
premixed windshield washer solvent/antifreeze
which is formulated for below freezing temperatures
see page 249.
Do not drive through flooded areas or water of unknown
depth.
If you must drive through deep water, drive slowly to
prevent water from entering the engine compartment or
passenger compartment, being ingested by the air
intake, possibly causing damage to electrical
components or wiring, to engine or transmission that is
not covered by the Mercedes-Benz Limited Warranty.
• Test battery: Battery capacity drops with decreasing
ambient temperature. A well charged battery helps
to ensure that the engine can be started, even at low
ambient temperatures.
• Tires: We recommend M+S rated radial-ply tires on
all four wheels for the winter season. Observe
permissible maximum speed for M+S rated
radial-ply tires and the legal speed limit.
199
Download from Www.Somanuals.com. All Manuals Search And Download.
Passenger compartment
Warning!
Traveling abroad
Abroad, there is a widely-spread Mercedes-Benz service
network at your disposal. If you plan to travel into areas
which are not listed in the index of your Mercedes-Benz
Center directory, you should request pertinent
information from your authorized Mercedes-Benz
Center.
Always fasten items being carried as securely as
possible.
In an accident, during hard braking or sudden
maneuvers, loose items will be thrown around
inside the vehicle, and cause injury to vehicle
occupants unless the items are securely fastened in
the vehicle.
The trunk is the preferred place to carry objects.
200
Driving instructions
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
Cruise control
1 Accelerate and set:
Lift lever briefly to set speed.
Hold lever up to accelerate.
1
2 Decelerate and set:
Depress lever briefly to set speed.
Hold lever down to decelerate.
3
Normally the vehicle is accelerated to the desired
speed with the accelerator.
Speed is set by briefly pushing the lever to
position 1 or 2. The accelerator can then be
released.
4
The speed can be increased (e.g. for passing) by
using the accelerator. After the accelerator is
released, the previously set speed will be resumed
automatically.
2
The cruise control allows you to drive in a more relaxed
manner, for example over long distances, as it
automatically maintains the set speed by actively
regulating the throttle setting.
If a set speed is to be increased or decreased
slightly, e. g. to adapt to the traffic flow, hold lever in
position 1 or 2 until the desired speed is reached, or
briefly tip the lever in the appropriate direction for
increases or decreases in 0.6 mph (1 km/h)
increments. When the lever is released, the newly
set speed remains.
Any given speed above approximately 25 mph
(40 km/h) can be maintained with the cruise control by
operating the lever.
201
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Canceling
Important!
To cancel the cruise control, briefly push lever to
position 3.
Moving gear selector lever to position “N” switches the
cruise control off.
When you step on the brake pedal or the vehicle
speed drops below approx. 25 mph (40 km/h), for
example when driving upgrade, the cruise control
will be canceled.
Warning!
Only use the cruise control if the traffic and
weather conditions make it advisable to travel at a
steady speed.
If the cruise control cancels by itself and remains
inoperative until the engine is restarted, have the
system checked at your authorized Mercedes-Benz
Center as soon as possible.
• The use of cruise control can be dangerous on
winding roads or in heavy traffic because
conditions do not allow safe driving at a steady
speed.
4 Resume
• The use of cruise control can be dangerous on
slippery roads. Rapid changes in tire adhesion
can result in wheel spin and loss of control.
If the lever is briefly pushed to position 4 when
driving at a speed exceeding approx. 25 mph
(40 km/h), the vehicle resumes the speed which
was set prior to the cancellation of the cruise
control. The last memorized speed is canceled when
the electronic key in the steering lock is turned to
position 1 or 0.
The “Resume” function should only be operated if
the driver is fully aware of the previously set speed
and wishes to resume this particular preset speed.
202
Driving systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
Notes:
Nevertheless, in some cases you may have to step on the
brake pedal to slow down. In this case the cruise control
is switched off.
If the engine does not brake the vehicle sufficiently
while driving on a downgrade, the speed you set on the
cruise control may be exceeded. In this case the
automatic transmission shifts down (max. to 3rd gear)
to maintain the set cruise control speed by using the
engine’s braking power.
Use the lever to resume the previously set speed.
As soon as the grade eases, the automatic transmission
shifts up again dependent on the selector lever position.
203
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
Brake assist system (BAS)
The BAS is designed to maximize the vehicle’s braking
capability during emergency braking maneuvers by
having maximum power boost applied to the brakes
more quickly in emergency braking conditions than
might otherwise be afforded solely by the driver’s
braking style. This can help reduce braking distances
over what ordinary driving and braking style might do.
The BAS complements the antilock brake system (ABS).
Warning!
BAS cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase
braking efficiency beyond that afforded by the
condition of the vehicle brakes and tires or the
traction afforded. The BAS cannot prevent
accidents, including those resulting from excessive
speed in turns, following another vehicle too
closely, or aquaplaning. Only a safe, attentive, and
skillful driver can prevent accidents. The
capabilities of a BAS equipped vehicle must never
be exploited in a reckless or dangerous manner
which could jeopardize the user’s safety or the
safety of others.
Applying the brakes very quickly results in maximum
BAS assistance.
To receive the benefit of the system you must apply
continuous full braking power during the stopping
sequence. Do not reduce brake pedal pressure.
Once the brake pedal is released, the BAS is deactivated.
The malfunction indicator lamp for the electronic
stability program (ESP) is combined with the BAS
malfunction indicator lamp.
204
Download from Www.Somanuals.com. All Manuals Search And Download.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the BAS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
BAS is operational.
The BAS/ESP malfunction indicator lamp in the
instrument cluster comes on with the electronic key in
steering lock position 2 and should go out with the
engine running.
If the BAS/ESP malfunction indicator lamp comes on
permanently while the engine is running, a malfunction
has been detected in either system. As a result, it is
possible that now only partial engine output will be
available. If the BAS malfunctions, the brake system
functions in the usual manner, but without BAS.
With the ABS malfunctioning, the BAS is also switched
off. Both malfunction indicator lamps come on with the
engine running.
If the BAS warning message is displayed, have the BAS
or ESP checked at your authorized Mercedes-Benz
Center as soon as possible.
205
Driving systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
Antilock brake system (ABS)
At the instant one of the wheels is about to lock up, a
slight pulsation can be felt in the brake pedal,
indicating that the ABS is in the regulating mode. Keep
firm and steady pressure on the brake pedal while
experiencing the pulsation.
Warning!
Do not pump the brake pedal, rather use firm,
steady brake pedal pressure. Pumping the brake
pedal defeats the purpose for ABS and significantly
reduces braking effectiveness.
On slippery road surfaces, the ABS will respond even
with light brake pedal pressure because of the
increased likelihood of locking wheels. The pulsating
brake pedal can be an indication of hazardous road
conditions and functions as a reminder to take extra
care while driving.
Important!
The ABS improves steering control of the vehicle during
hard braking maneuvers.
The ABS prevents the wheels from locking up above a
vehicle speed of approximately 5 mph (8 km/h)
independent of road surface conditions.
206
Download from Www.Somanuals.com. All Manuals Search And Download.
ABS control
If the ABS malfunction indicator lamp stays illuminated,
have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
The ABS malfunction indicator lamp - in the
instrument cluster comes on with the electronic key in
steering lock position 2 and should go out with the
engine running.
Warning!
ABS cannot prevent the natural laws of physics
from acting on the vehicle, nor can it increase
braking or steering efficiency beyond that afforded
by the condition of the vehicle brakes and tires or
the traction afforded. The ABS cannot prevent
accidents, including those resulting from excessive
speed in turns, following another vehicle too
closely, or aquaplaning. Only a safe, attentive, and
skillful driver can prevent accidents. The
capabilities of an ABS equipped vehicle must never
be exploited in a reckless or dangerous manner
which could jeopardize the user’s safety or the
safety of others.
When the ABS malfunction indicator lamp in the
instrument cluster comes on while the engine is
running, it indicates that the ABS has detected a
malfunction and has switched off. In this case, the brake
system functions in the usual manner, but without
antilock assistance.
With the ABS malfunctioning, the BAS and ESP are also
switched off. Both malfunction indicator lamps come on
with the engine running.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the ABS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
ABS is operational.
Note:
To alert following vehicles to slippery road conditions
you discover, operate your hazard warning flashers as
appropriate.
207
Driving systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
Electronic stability program (ESP)
Notes:
The ESP enhances directional control and reduces
driving wheel spin of the vehicle under various driving
conditions.
The malfunction indicator lamp for the ESP is
combined with that of the BAS.
The yellow BAS/ESP malfunction indicator lamp in the
instrument cluster and the yellow ESP warning
lamp in the speedometer dial come on with the
electronic key in steering lock position 2. They should
go out with the engine running.
Over/understeering of the vehicle is counteracted by
applying brakes to the appropriate wheel to create a
countervailing vehicle movement. Engine torque is also
limited. The ESP warning lamp, located in the
speedometer dial, starts to flash when ESP is in
operation.
If the BAS/ESP malfunction indicator lamp comes on
continuously with the engine running, a malfunction
has been detected in either system. Only partial engine
output will be available.
Important!
adapt your speed
If the ESP warning lampflashes
If the BAS malfunctions, the brake system functions in
the usual manner, but without BAS.
and driving to the prevailing roadconditions.
Caution!
If the ESP warning message is displayed, have the BAS
or ESP checked at your authorized Mercedes-Benz
Center as soon as possible.
If the vehicle is towed with the front axle raised (see
towing the vehicle on page 265), the engine must be
shut off (electronic key in steering lock position 0 or 1).
Otherwise, the ESP will immediately be engaged and
will apply the rear wheel brakes.
With the ABS malfunctioning, the ESP is also switched
off.
208
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving the vehicle with varied size tires will cause the
wheels to rotate at different speeds, therefore the ESP
may activate (yellow ESP warning lamp in speedometer
dial comes on). For this reason, all wheels, including the
spare wheel, must have the same tire outside diameter.
ESP control switch
When testing the parking brake on a brake test
dynamometer, the engine must be shut off. Otherwise,
the ESP will immediately be engaged and will apply the
rear wheel brakes.
In winter operation, the maximum effectiveness of the
ESP is only achieved with Mercedes-Benz recommended
M+S rated radial-ply tires and/or snow chains.
P54.25-2037-26
Synchronizing ESP
If the power supply was interrupted (battery
disconnected or empty), the BAS/ESP malfunction
indicator lamp may be illuminated with the engine
running.
ESP control switch located on center console.
To improve the vehicle’s traction when driving with
snow chains, or starting off in deep snow, sand or gravel,
switch off ESP by pressing the upper half of the ESP
switch. The ESP warning lamp, located in the
Turn steering wheel completely to the left and then to
the right. The BAS/ESP malfunction indicator lamp
should go out.
speedometer dial, is continuously illuminated.
209
Driving systems
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Driving systems
The ESP warning lamp, located in the speedometer dial,
starts to flash at any vehicle speed as soon as the tires
lose traction and the wheels begin to spin.
With the ESP system switched off, the engine torque
reduction feature is cancelled. Therefore, the enhanced
vehicle stability offered by ESP is unavailable.
To return to the enhanced vehicle stability offered by
ESP: press lower half of the switch (the ESP warning
lamp in the speedometer dial goes out).
Adapt your speed and driving to the prevailing road
conditions.
A portion of the ESP system remains active, even with
the switch in the OFF position.
Important!
If one drive wheel loses traction and begins to spin, the
brake is applied until the wheel regains sufficient
traction. The traction control engages at vehicle speeds
up to approximately 24 mph (40 km/h), and switches off
at 50 mph (80 km/h).
If the ESP warning lamp flashes:
• during take-off, apply as little throttle as possible,
• while driving, ease up on the accelerator.
Note:
Avoid spinning of one drive wheel. This may cause
serious damage to the drive train which is not covered
by the Mercedes-Benz Limited Warranty.
210
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
What you should know at the gas station
What you should know at the gas station
Open flap by pushing near front (arrow). Turn fuel cap
to the left and hold on to it until possible pressure in
tank has been released, then remove cap. Failure to
remove slowly could result in personal injury.
Manual release of fuel filler flap, see page 287.
Fuel
To prevent fuel vapors from escaping into open air, fully
insert filler nozzle unit. Only fill fuel tank until the filler
nozzle unit cuts out – do not top up or overfill.
Warning!
Overfilling of fuel tank may result in creating
pressure in the system which could cause a gas
discharge such as the gas spraying back out upon
removing the filler nozzle which could cause
personal injury.
Fuel supply
Warning!
Gasoline is highly flammable and poisonous. It
burns violently and can cause serious injury.
Whenever you are around gasoline, avoid inhaling
fumes and skin contact, extinguish all smoking
materials. Never allow sparks, flame or smoking
materials near gasoline!
Leaving the engine running and the fuel cap open can
cause the “CHECK ENGINE” lamp to illuminate.
Fuel tank capacity approx. 16.4 US gal (62.0 l).
This includes approx. 2.1 US gal (8.0 l) reserve. Use
premium unleaded gasoline: Posted Octane Index 91
(Average of 96 RON/86 MON).
211
Download from Www.Somanuals.com. All Manuals Search And Download.
• Engine oil
• Air conditioner
Engine oil level check, see page 110and page 246
R-134a refrigerant and special PAG lubricant, see
page 307.
Fill quantity between upper and lower dipstick
marking level: 2.1 US qt (2.0 l).
• Bulbs
Recommended engine oils, see Approved Service
Products sheet.
High and low beams: H7 (55 W),
low beam: Xenon (optional)
fog lamps: H1 (55 W),
turn signal lamps,
• Coolant
For normal replenishing, use water (potable water
quality).
front 1156 NA (26.9/5 W/32/4 cp),
parking and standing lamps, front: H 6W (6 W),
side marker lamps, front: 5 W/4 cp,
turn signal lamps, rear: 21 W/24 cp,
stop, tail, parking and side marker lamps: 21/4 W,
tail and parking lamp: 5 W/4 cp,
rear fog lamp, driver’s side: 21 W/32 cp,
backup lamps: 21 W/32 cp,
For further information (e.g. anticorrosion/
antifreeze), see page 307.
• Spark plugs
Approved spark plugs, see page 305.
• Tire pressure
license plate lamps: 5 W/4 cp.
For tire pressure, refer to tire pressure label inside
the fuel filler flap. See page 259 for further details.
212
What you should know at the gas station
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Check regularly and before a long trip
Check regularly and before a long trip
1 Engine oil level
See “Engine oil level, checking” on page 110 and
page 246.
2 Coolant level
See “Coolant level” on page 248.
3 Brake fluid
See “Brake fluid” on page 309.
4 Windshield washer system
Headlamp cleaning system
For refilling reservoir see page 249.
Vehicle lighting: Check function and cleanliness. For
replacement of light bulbs, see “Exterior lamps” on
page 269.
213
Download from Www.Somanuals.com. All Manuals Search And Download.
214
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction and warning messages in the
multifunction display
DISPLAY DEFECTIVE (engine control unit)
DISPLAY DEFECTIVE (several systems)
BATTERY/ALTERNATOR
ABS-SYSTEM
Instrument cluster display
222
223
223
224
225
225
226
226
227
227
228
229
230
231
231
232
232
Malfunction and indicator lamps in the instrument cluster 216
On-board diagnostic system
Check engine malfunction indicator lamp
Supplemental restraint system (SRS) indicator lamp
Fuel reserve and fuel cap
216
218
BRAKE ASSIST
placement warning
218
219
219
219
220
220
221
221
221
BRAKE LINING WEAR
BRAKE FLUID
PARKING BRAKE
Electronic stability program(ESP) — warning lamp
BAS/ESP malfunction indicator lamp
ABS malfunction indicator lamp
ENGINE FAN
Telescoping steering column – indicator lamp
Seat belt warning lamp
Malfunction and indicator lamps in the center console
AIRBAG OFF indicator lamp
Roll bar warning lamp
COOLANT (coolant level)
COOLANT TEMP. (coolant temperature)
LIGHTING SYSTEM
LIGHT SENSOR
STEER. WHEEL ADJUST.
OIL TEMP.
ENGINE OIL LEVEL
ELEC. STABIL. PROG. (Electronic stability
program)
WASHER FLUID
234
235
215
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and indicator lamps
Malfunction and indicator lamps
in the instrument cluster
The Sequential Multiport Fuel Injection (SFI) control
module monitors emission control components that
either provide input signals to or receive output signals
from the control module. Malfunctions resulting from
interruptions or failure of any of these components are
indicated by the “CHECK ENGINE” malfunction
indicator lamp in the instrument cluster and are
simultaneously stored in the SFI control module.
On-board diagnostic system
Check engine malfunction indicator lamp
Engine malfunction indicator lamp. If the
“CHECK ENGINE” malfunction indicator
lamp comes on when the engine is running,
CHECK
ENGINE
it indicates a malfunction of the fuel management
system, emission control system, systems which impact
emissions, or the fuel cap is not closed tight (check the
fuel cap). If the “CHECK ENGINE” lamp is illuminated
continuously and the vehicle is driving normally, you
may still drive the vehicle, however, in all cases, we
recommend that you have the system checked at your
authorized Mercedes-Benz Center as soon as possible.
If the “CHECK ENGINE” malfunction indicator lamp
comes on, have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
With some exceptions, the control module switches off
the “CHECK ENGINE” malfunction indicator lamp if the
condition, causing the lamp to come on, no longer exists
during three consecutive cycles. See also page 218 for
fuel cap placement warning.
If the “CHECK ENGINE” lamp comes on continuously
and/or the vehicle is not driving normally (e.g.
malfunction of the fuel management system or running
out of fuel), serious damage can occur to the emission
system. Please contact your authorized Mercedes-Benz
Center immediately.
An on-board diagnostic connector is located in the
passenger compartment near to the parking brake
pedal, allowing the accurate identification of system
malfunctions through the readout of diagnostic trouble
codes.
216
Download from Www.Somanuals.com. All Manuals Search And Download.
Brake warning lamp
Warning!
Driving with the brake warning lamp illuminated
can result in an accident. Have your brake system
checked immediately if the brake warning lamp
stays on. Don’t add brake fluid before checking the
brake system. Overfilling the brake fluid reservoir
can result in spilling brake fluid on hot engine
parts and the brake fluid catching fire. You can be
seriously burned.
BRAKE
Except Canada
Canada only
When the brake warning lamp and message appear
while the engine is running, this means:
• there is insufficient brake fluid in the reservoir
Note:
(engine running and parking brake released), or
If you find that the minimum mark on the brake fluid
reservoir is reached, have the brake system checked for
brake pad thickness and leaks.
• the parking brake is set (engine running).
217
Malfunction and indicator lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and indicator lamps
Supplemental restraint system (SRS) indicator lamp
Fuel reserve and fuel cap placement warning
The operational readiness of the airbag
system is verified by the indicator lamp
“SRS” in the instrument cluster when
SRS
turning the electronic key in steering lock to position 1
or 2. If no malfunction is detected, the lamp will go out
after approximately 4 seconds; after the lamp goes out,
the system continues to monitor the components and
circuitry of the airbag system and will indicate a
malfunction by coming on again.
1
N54.30-2756-21
When the warning lamp (1) comes on after starting the
engine, or if it comes on while driving, it indicates that
the fuel level is down to the reserve quantity of
approximately 2.1 gal (8 liters).
Warning!
In the event a malfunction of the “SRS” is indicated
as outlined above, the “SRS” may not be
operational. For your safety, we strongly
recommend that you visit an authorized
Mercedes-Benz Center immediately to have the
system checked; otherwise the “SRS” may not be
activated when needed in an accident, which could
result in serious or fatal injury, or it might deploy
unexpectedly and unnecessarily which could also
result in injury.
The warning lamp blinks when the fuel cap is not
closed, or a fuel system leak has been detected.
Retighten cap and see if lamp goes out after restart and
next OBD selfcheck.
If the warning lamp continues to blink after closing the
fuel cap correctly, have the fuel system checked at your
authorized Mercedes-Benz Center as soon as possible.
Leaving the engine running and the fuel cap open can
also cause the “CHECK ENGINE” lamp to illuminate, see
page 216.
See page 65 for notes on airbags, see page 64 for belt
tensioners and page 71for infant and child seat
restraint.
218
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronic stability program (ESP) — warning lamp
ABS malfunction indicator lamp
The ABS malfunction indicator lamp in the
instrument cluster comes on with the
electronic key in steering lock position 2 and
should go out with the engine running.
The yellow ESP warning lamp in the
speedometer dial comes on with the
electronic key in steering lock position 2.
ABS
It should go out with engine running.
When the ABS malfunction indicator lamp symbol and
warning in the instrument cluster remains illuminated
while the engine is running, it indicates that the ABS
has detected a malfunction and has switched off. In this
case, the brake system functions in the usual manner,
but without antilock assistance.
See page 208 if the warning lamp lights up or flashes
when the vehicle is moving.
BAS/ESP malfunction indicator lamp
The malfunction indicator lamp for the ESP
is combined with that of the BAS.
BAS
ESP
With the ABS malfunctioning, the BAS and ESP are also
switched off. Both malfunction indicator lamps come on
with the engine running.
The yellow BAS/ESP malfunction indicator
lamp in the instrument cluster comes on with the
electronic key in steering lock position 2. It should go
out with the engine running.
If the charging voltage falls below 10 volts, the
malfunction indicator lamp comes on and the ABS is
switched off. When the voltage is above this value again,
the malfunction indicator lamp should go out and the
ABS is operational.
If the BAS/ESP malfunction indicator lamp remains
illuminated with the engine running, see page 209.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
See page 206 for notes on the antilock brake system
(ABS).
219
Malfunction and indicator lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and indicator lamps
Telescoping steering column – indicator lamp
Seat belt warning lamp
The indicator lamp in the instrument cluster
comes on with the electronic key in steering
lock position 2 and should go out with the
engine running.
With the electronic key in steering lock
position 2, the seat belt warning lamp comes
on and a warning sounds for approx.
6 seconds if the driver’s seat belt is not fastened.
If the indicator lamp does not go out after starting the
engine, the adjustable steering column is not properly
locked.
For locking the adjustable telescoping steering column,
see page 74.
220
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction and indicator lamps in the
center console
Roll bar warning lamp
The roll bar warning lamp is located in the roll bar
switch in the center console. Roll bar switch see
page 52.
AIRBAG OFF indicator lamp
With the electronic key in steering lock position 2, the
roll bar warning lamp comes on and should go out with
the engine running.
The 7 indicator lamp will light up for approx.
6 seconds when you turn the electronic key in steering
lock to position 1 or 2.
With the engine running and the roll bar lowered, the
warning lamp in the roll bar switch will blink for
approx. 15 seconds. The blinking is reminding you to
raise the roll bar if the rear passenger seats are
occupied.
The 7 indicator lamp stays lit as long as a
BabySmartTM compatible child seat is properly installed
on the front passenger seat. It indicates that the front
passenger airbag is switched off.
See page 63 for BabySmartTM deactivation system.
Warning!
BabySmartTM is a trademark of Siemens Automotive Corp.
If the warning lamp does not go out after starting
the engine, or if it comes on while driving, then the
roll bar system is not operating properly and may
not activate in an accident. In this case, raise the
roll bar manually (see page 51) before continuing
to drive.
Note:
Have the roll bar system checked at your authorized
Mercedes-Benz Center as soon as possible.
221
Malfunction and indicator lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
Malfunction and warning messages in the
multifunction display
Notes:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
accompanied by an audible signal.
They are divided into three categories
Temporary messages such as “SWITCH OFF LIGHTS”
will not be stored in the malfunction message memory.
Category C1:
Messages of most immediate priority.
These cannot be clerared from the instrument cluster
using theJbutton.
Warning!
All messages contain important information which
should be taken note of and, where malfunction
indicated, addressed as soon as possible at an
authorized Mercedes-Benz Center.
Categories C2 and C3:
Messages of less immediate priority.
These messages can be cleared from the instrument
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
using the J button and
are then stored in the
message
malfunction
memory. See page 102.
222
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY DEFECTIVE
DISPLAY DEFECTIVE
Line 1
Line 2
Line 1
Line 2
C*
C*
DISPLAY DEFECTIVE
VISIT WORKSHOP!
DISPLAY DEFECTIVE
VISIT WORKSHOP!
2
2
* C = Category, see page 222
* C = Category, see page 222
This message is displayed to indicate that the
The displays for several systems have failed. Some
systems themselves may also have failed.
information being relayed by the engine control unit is
no longer complete. The coolant temperature gauge,
tachometer, or the cruise control may have failed.
223
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
BATTERY/ALTERNATOR
It may indicate that the poly-V-belt has broken. Should
this condition occur, the poly-V-belt must be replaced
before continuing to operate the vehicle. Otherwise, the
engine will overheat due to an inoperative water pump
which may result in damage to the engine.
Do not continue to drive the vehicle with this message
displayed.
Doing so could result in serious engine damage that is
not covered by the Mercedes-Benz Limited Warranty.
Line 1
Line 2
VISIT WORKSHOP!
C*
BATTERY/ALTERNATOR
OVERVOLTAGE
UNDERVOLTAGE
2
2
2
VISIT WORKSHOP!
CONSUMER DEFECTIVE!
* C = Category, see page 222
This message indicates a malfunction which must be
repaired immediately.
224
Download from Www.Somanuals.com. All Manuals Search And Download.
ABS-SYSTEM
BRAKE ASSIST
P54.30-2938-21
C*
Line 1
Line 2
Line 1
Line 2
C*
2
2
ABS-SYSTEM
VISIT WORKSHOP!
BRAKE ASSIST
DISPLAY DEFECTIVE
VISIT WORKSHOP!
VISIT WORKSHOP!
* C = Category, see page 222
2
A malfunction has been detected in the system. The
brake system functions in the usual manner, but
without antilock assistance.
* C = Category, see page 222
A malfunction has been detected in the system. The
brake system functions in the usual manner, but
without BAS.
With the ABS malfunctioning, the BAS and ESP are also
switched off.
Have the system checked at your authorized
Mercedes-Benz Center as soon as possible.
225
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
BRAKE FLUID
Car care
Index
Malfunction and warning messages
BRAKE LINING WEAR
C*
Line 1
Line 2
VISIT WORKSHOP!
Line 1
Line 2
VISIT WORKSHOP!
C*
2
BRAKE LINING WEAR
2
BRAKE FLUID
* C = Category, see page 222
* C = Category, see page 222
When this message appears during braking, it indicates
that the brake pads are worn down.
Warning!
Driving with this message displayed can result in
an accident. Have your brake system checked
immediately. Don’t add brake fluid before checking
the brake system. Overfilling the brake fluid
reservoir can result in spilling brake fluid on hot
engine parts and the brake fluid catching fire. You
can be seriously burned.
Have the brake system checked at your authorized
Mercedes-Benz Center as soon as possible.
226
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE
ENGINE FAN
Line 1
Line 2
Line 1
Line 2
C*
C*
PARKING BRAKE
RELEASE BRAKE!
ENGINE FAN
VISIT WORKSHOP!1
2
2
* C = Category, see page 222
* C = Category, see page 222
1
The cooling fan for the coolant is faulty. Observe coolant
temperature gauge while driving, see page 84.
Parking brake, see page 192.
227
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
COOLANT (coolant level)
The low engine coolant level warning should not be
ignored. Extended driving with the symbol displayed
may cause serious engine damage not covered by the
Mercedes-Benz Limited Warranty.
Notes:
Do not drive without coolant in the cooling system. The
engine will overheat causing major engine damage.
Monitor the coolant temperature gauge while driving.
Line 1
Line 2
CHECK LEVEL!
C*
See page 248 for instructions on adding coolant.
COOLANT
2
Warning!
* C = Category, see page 222
Do not spill antifreeze on hot engine parts.
Antifreeze contains ethylene glycol which may
burn if it comes into contact with hot engine parts.
You can be seriously burned.
When this message appears while driving, the coolant
level has dropped below the required level. If no leaks
are noticeable and the engine temperature does not
increase, continue to drive to the nearest service station
and have coolant added to the coolant system.
228
Download from Www.Somanuals.com. All Manuals Search And Download.
COOLANT TEMP. (coolant temperature)
During severe operating conditions and stop-and-go city
traffic, the coolant temperature may rise close to the red
marking.
The engine should not be operated with the coolant
temperature in the red zone. Doing so may cause
serious engine damage which is not covered by the
Mercedes-Benz Limited Warranty.
Warning!
Driving when your engine is badly overheated can
cause some fluids which may have leaked into the
engine compartment to catch fire. You could be
seriously burned.
C*
Line 1
Line 2
COOLANT TEMP.
VISIT WORKSHOP!1
2
Steam from an overheated engine can cause serious
burns and can occur just by opening the engine
hood. Stay away from the engine if you see or hear
steam coming from it.
* C = Category, see page 222
1
Observe coolant temperature gauge, see page 84.
This may indicate that the poly-V-belt has broken. Should this
Turn off the engine, get out of the vehicle and do
not stand near the vehicle until it cools down.
condition occur, the poly-V-belt must be replaced before continuing
to operate the vehicle. Otherwise, the engine will overheat due to
an inoperative water pump which may result in damage to the
engine. Do not continue to drive the vehicle with this message
displayed. Doing so could result in serious engine damage that is
not covered by the Mercedes-Benz Limited Warranty.
229
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
LIGHTING SYSTEM
When the message appears after starting the engine, or
if it comes on while driving, this indicates a failure in
the parking lamp, taillamp, stop lamp, or low beam
headlamp. See page 269 for instructions on replacing
bulbs.
If an exterior lamp fails, the message will appear only
when that lamp is switched on.
If a brake lamp fails, the message will appear when
applying the brake and stays on until the engine is
turned off.
Line 1
Line 2
CHECK LAMPS!
VISIT WORKSHOP!
C*
Note:
LAMP DEFECTIVE
DISPLAY DEFECTIVE
2
If additional lighting is installed (e.g. auxiliary
headlamps etc.) be certain to connect into the fuse
before the failure indicator monitoring unit order to
avoid damaging the system.
2
* C = Category, see page 222
230
Download from Www.Somanuals.com. All Manuals Search And Download.
LIGHT SENSOR
STEER. WHEEL ADJUST.
With the electronic key removed and the driver’s door
open, a warning sounds and the message “SWITCH OFF
LIGHTS!” appears in the multifunction indicator if the
vehicle’s exterior lamps (except standing lamps) are not
switched off.
Line 1
Line 2
C*
1
STEER. WHEEL ADJUST.
* C = Category, see page 222
For locking the adjustable telescoping steering column,
see page 74.
231
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
OIL TEMP. (engine oil temperature)
ENGINE OIL LEVEL
Line 1
Line 2
C*
Line 1
Line 2
C*
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL LEVEL
CHECK LEVEL!1
2
OIL TEMP. TOO HIGH
REDUCE REVS.!
2
STOP, ENGINE OFF!2
REDUCE OIL LEVEL!3
VISIT WORKSHOP!4
VISIT WORKSHOP!5
VISIT WORKSHOP!6
1
2
2
* C = Category, see page 222
There is a danger of engine damage - change to a higher
gear or reduce road speed.
ENGINE OIL SENSOR
ENGINE OIL
2
2
Check the engine oil level as soon as the vehicle returns
to operating temperature. See Engine oil level indicator
on the page 110.
* C = Category, see page 222
1
The engine oil level must be checked immediately. See Engine oil
level indicator on page 110
232
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
2
3
There is no oil in the engine. There is a danger of engine damage.
When the “ENGINE OIL LEVEL – CHECK LEVEL”
message appears while the engine is running and at
operating temperature, the engine oil level has dropped
to approximately the minimum mark on the dipstick.
There is a risk of damaging the engine or catalytic converter. The
engine oil level must be checked immediately. See Engine oil level
indicator on page 110.
When this occurs, the warning will first come on
intermittently and then stay on if the oil level drops
further.
4
The engine oil level has dropped to a critical level.
Check the engine oil level immediately. See Engine oil level
indicator on page 110 and check the engine for visible leakage (loss
of oil).
If no oil leaks are noted, continue to drive to the nearest
service station where the engine oil should be topped to
the “full” mark on the dipstick with an approved oil.
5
6
The measuring system is malfunctioning.
It may be that there is water in the engine oil. Have the engine oil
checked.
The engine oil level warnings should not be ignored.
Extended driving with the symbol displayed could
result in serious engine damage that is not covered by
the Mercedes-Benz Limited Warranty.
233
Download from Www.Somanuals.com. All Manuals Search And Download.
ELEC. STABIL. PROG.
(Electronic stability program)
1
A malfunction has been detected in the system. Pressing the
accelerator pedal will require greater effort. Only partial engine
output will be available.
2
3
This message may be displayed if the power supply was
interrupted (battery disconnected or empty).
Synchronize ESP. See page 209
Line 1
Line 2
C*
DISPLAY DEFECTIVE
ELEC. STABIL. PROG.
VISIT WORKSHOP!
3
VISIT WORKSHOP!1, 2, 3
* C = Category, see page 222
234
Malfunction and warning messages
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Malfunction and warning messages
WASHER FLUID
When this message appears while the engine is
running, the level of the reservoir has dropped to
approx. 1/3 of the total volume. The reservoir should be
refilled with the prescribed mixture of MB Windshield
Washer Concentrate “S” and water or the Concentrate
and commercially available premixed windshield
washer solvent/antifreeze, depending on ambient
temperature, at the next opportunity. The reservoir for
the windshield and headlamp washer systems is located
in the engine compartment.
See windshield washer system on page 249for
instructions on adding washer fluid.
C*
3
Line 1
Line 2
CHECK LEVEL!
WASHER FLUID
* C = Category, see page 222
235
Download from Www.Somanuals.com. All Manuals Search And Download.
236
Download from Www.Somanuals.com. All Manuals Search And Download.
Practical hints
Changing wheels
254
259
261
263
265
268
269
274
277
280
287
287
288
288
First aid kit
238
238
238
238
240
241
242
244
246
247
247
248
249
249
250
250
251
252
Tire inflation pressure
Battery
Jump starting
Towing the vehicle
Transmission selector lever, manually unlocking
Bulbs
Adjusting headlamp aim
Changing batteries in the electronic main key
Raising soft top manually
Antenna
Manual release for fuel filler flap
Trunk lamp
Replacing wiper blade insert
Shelf below rear window
Stowing things in the vehicle
Luggage cover
Spare wheel, vehicle tools, storage compartment
Vehicle jack
Fuses
Hood
Checking engine oil level
Automatic transmission fluid level
Coolant level
Adding coolant
Windshield washer / headlamp clean.system
Windshield and headlamp washer fluid mixing ratio
Wheels
Tire replacement
Rotating wheels
Spare wheel
237
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Luggage cover
Car care
Index
First aid kit
First aid kit
The first aid kit is stored in the left trunk well.
Shelf below rear window
Warning!
The shelf below the rear window should not be
used to carry objects. This will avoid such objects
from being thrown about and injuring vehicle
occupants during an accident or sudden maneuver.
The trunk is the preferred place to carry objects.
Stowing things in the vehicle
Warning!
1 Handle
2 Holder
To help avoid personal injury during a collision or
sudden maneuver, exercise care when stowing
things. Put luggage or cargo in the trunk if
possible. Do not pile luggage or cargo higher than
the seat backs. Do not place anything on the shelf
below the rear window.
To close compartment:
Pull out on handle (1) to the stop and guide luggage
cover into left and right holders (2).
238
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
To prevent damage to soft top or luggage/cargo when
lowering the roof:
• load trunk only to the height of the luggage cover,
• do not permit luggage/cargo to raise the closed
luggage cover,
• do not load anything on top of the luggage cover,
• do not operate the luggage cover with the soft top
lowered. Doing so will result in damage to the
luggage cover or the soft top.
P65.10-2007-26
Note:
To open compartment:
Opening and closing of the soft top can only be done
with the luggage cover and trunk lid closed.
Press button (arrow). Unhook luggage cover from
holders (2) and guide luggage cover with handle (1) into
storage compartment until handle (1) locks in place.
239
Luggage cover
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Spare wheel, vehicle jack
Spare wheel, vehicle tools, storage compartment
Lift trunk floor and engage handle in grip molding of
luggage cover.
To remove spare tire:
Turn luggage bowl counterclockwise and remove.
To store spare tire:
Place spare tire in wheel well and secure it with luggage
bowl. Turn luggage bowl clockwise to its stop.
Note:
Always lower trunk floor before closing trunk lid.
1 Trunk floor
2 Handle
3 Luggage bowl
4 Vehicle tools
240
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle jack
Warning!
The jack is designed exclusively for jacking up the
vehicle at the jack tubes built into either side of the
vehicle. To help avoid personal injury, use the jack
only to lift the vehicle during a wheel change.
Never get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from the area
under the lifted vehicle. Always firmly set parking
brake and block wheels before raising vehicle with
jack.
2
Do not disengage parking brake while the vehicle is
raised. Be certain that the jack is always vertical
when in use, especially on hills. Always try to use
the jack on level surface. Be sure that the jack arm
is fully inserted in the jack tube. Always lower the
vehicle onto sufficient capacity jackstands before
working under the vehicle.
1
P40.10-2027-26
1 Jack arm
2 Jack base
See illustration for proper storage of jack.
Before storing the jack on the felt in the spare wheel
well, the jack arm must be lowered almost to the base of
the jack.
241
Spare wheel, vehicle jack
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Fuses
Fuses
Fuse box in engine compartment
Before replacing a blown fuse, determine the cause of
the short circuit.
Spare fuses are supplied inside the main fuse box (1).
Observe amperage and color of fuse.
A special fuse puller is supplied with the vehicle tools.
1
Always use a new fuse for replacement. Never attempt to
repair or bridge a blown fuse.
A fuse chart can be found inside the corresponding fuse
box cover.
1 Main fuse box in engine compartment
To gain access to the main fuse box (1), press clamp
(arrow), lift the fuse box cover up and remove it.
To close the main fuse box, engage back end of cover
and let front end snap into place.
242
Download from Www.Somanuals.com. All Manuals Search And Download.
Auxiliary fuse box below the trunk floor
Auxiliary fuse box in the dashboard
2
P
2 Auxiliary fuse box below the trunk floor.
3 Auxiliary fuse box to left of exterior lamp switch.
To gain access, lift trunk floor.
To gain access, open door, pry off cover (3) and
remove.
243
Fuses
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Engine compartment
Hood
Warning!
To help prevent personal injury, stay clear of
moving parts when the hood is open and the engine
is running. Be sure the hood is properly closed
before driving. When closing hood, use extreme
caution not to catch hands or fingers.
1
The engine is equipped with a transistorized
ignition system. Because of the high voltage it is
dangerous to touch any components (ignition coils,
spark plug sockets, diagnostic socket) of the
ignition system
P88.40-2025-26
• with the engine running,
• while starting the engine,
To open:
• if ignition is “on” and the engine is turned
manually.
To unlock the hood, pull release lever (1) under the
driver’s side of the instrument panel. At the same time a
handle will extend out of the radiator grill (it may be
necessary to lift the hood up slightly).
If you see flames, steam or smoke coming from the
engine compartment, or if the coolant temperature
gauge indicates that the engine is overheated, do
not open the hood. Move away from vehicle and do
not open the hood until the engine has cooled. If
necessary, call a fire department.
Caution!
To avoid damage to the windshield wiper or hood, open
the hood only with wiper in the parked position.
244
Download from Www.Somanuals.com. All Manuals Search And Download.
To close:
3
3
Lower hood and let it drop into lock from a height of
approx. 1 ft. (30 cm), assisting with hands placed flat on
edges of hood (3).
To avoid hood damage, please make sure that hood is
fully closed. If not, repeat closing procedure. Do not
push down on hood to attempt to fully close it.
2
P88.40-2017-26
Pull handle (2) to its stop out of radiator grill and open
hood (do not pull up on handle).
245
Engine compartment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Engine compartment
Checking engine oil level (CLK 320 shown)
Wipe oil dipstick clean prior to checking the engine oil
level. Fully insert dipstick in tube, and remove after
three seconds to obtain accurate reading.
M e r c e d e s - B e n z
Oil level must be between the
lower (min) and upper (max) mark of
the dipstick.
2
M e r c e d e s - B e n z
1
Fill quantity between upper and lower dipstick marking
level is approximately 2.1 US qt (2.0 l).
Do not overfill the engine. Excessive oil must be drained
or siphoned. It could cause damage to engine and
catalytic converter not covered by the Mercedes-Benz
Limited Warranty.
1 Oil dipstick
See malfunction and warning messages on page 222 if
an engine oil level display appears on the multifunction
display when the engine is running.
2 Oil filler cap
To check the engine oil level, park vehicle on level
ground, with engine at normal operational temperature.
Note:
Check engine oil level approximately 5 minutes after
stopping the engine, allowing for the oil to return to the
oil pan.
See page 110 for engine oil level indicator.
246
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic transmission fluid level
Coolant level
The transmission has a permanent fill of automatic
transmission fluid.
Regular automatic transmission fluid level checks and
changes are not required. For this reason the dipstick is
omitted.
If you notice fluid leaks or gear shifting malfunctions,
have your authorized Mercedes-Benz Center check the
transmission fluid level.
P20.30-2032-26
To check the coolant level, the vehicle must be parked
on level ground and the engine stopped.
Check coolant level only when coolant is cold.
The coolant level should reach the black top part of the
reservoir.
247
Engine compartment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Engine compartment
Adding coolant
• Using a rag, slowly open cap approximately
1/2 turn to relieve excess pressure. If opened
immediately, scalding hot fluid and steam will
be blown out under pressure.
If coolant has to be added, a 50/50 mixture of water and
MB anticorrosion/antifreeze should be added.
The drain plugs for the cooling system are located on
the right side of the engine block and at the bottom of
the radiator.
• Do not spill antifreeze on hot engine parts.
Antifreeze contains ethylene glycol which may
burn if it comes into contact with hot engine
parts.
Anticorrosion/antifreeze mixture, see page 311.
Warning!
In order to avoid possible serious burns or injury:
• Use extreme caution when opening the hood if
there are any signs of steam or coolant leaking
from the cooling system, or if the coolant
temperature gauge indicates that the coolant is
overheated.
• Do not remove pressure cap on coolant
reservoir if engine temperature is above 194°F
(90°C). Allow engine to cool down before
removing cap. The coolant reservoir contains
hot fluid and is under pressure.
248
Download from Www.Somanuals.com. All Manuals Search And Download.
Windshield washer/headlamp cleaning system
Warning!
Washer solvent/antifreeze is highly flammable. Do
not spill washer solvent/antifreeze on hot engine
parts, because it may burn. You can be seriously
burned.
Windshield and headlamp washer
fluid mixing ratio
1
For temperatures above freezing:
MB Windshield Washer Concentrate “S” and water.
1 part “S” to 100 parts water
(40 ml “S” to 1 gallon water).
P82.35-2017-26
1 Windshield washer/headlamp cleaning system fluid
For temperature below freezing:
reservoir
MB Windshield Washer Concentrate “S” and
commercially available premixed windshield washer
solvent/antifreeze.
Capacity approx. 7.4 US qt (7.0 l).
The reservoir should be refilled with MB Windshield
washer concentrate and water (or commercially
available premixed windshield washer solvent/
antifreeze, depending on ambient temperatures).
1 part “S” to 100 parts solvent
(40 ml “S” to 1 gallon solvent).
249
Engine compartment
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tires, Wheels
Wheels
It is imperative that the wheel mounting bolts be
fastened to a tightening torque of 80 ft.lb. (110 Nm)
whenever wheels are mounted.
Replace rims or tires with the same designation,
manufacturer and type as shown on the original part.
See your authorized Mercedes-Benz Center for further
information.
For rim and tire specifications, refer to “Technical Data”
See your authorized Mercedes-Benz Center for
information on tested and recommended rims and tires
for summer and winter operation. They can also offer
advice concerning tire service and purchase.
Warning!
Worn, old tires can cause accidents. If the tire tread
is badly worn, or if the tires have sustained
damage, replace them.
When replacing rims, use only genuine
Tire replacement
Mercedes-Benz wheel bolts specified for the
particular rim type. Failure to do so can result in
the bolts loosening and possibly an accident.
Front tires should be replaced in sets. Rims and tires
must be of the correct size and type. For dimensions,
see “Technical Data”
We recommend that you break in new tires for approx.
60 miles (100 km) at moderate speed.
250
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating wheels
Notes:
CLK 430:
Thoroughly clean the inner side of the wheels any time
you rotate the wheels or wash the vehicle underside.
Wheel rotation applies only when winter tires are
mounted on all four wheels.
The use of retread tires is not recommended. Retread
tires may adversely affect the handling characteristics
and safety of the vehicle.
The wheels can be rotated according to the degree of
tire wear while retaining the same direction of travel.
Rotating, however, should be carried out as
Dented or bent rims can cause tire pressure loss and
damage to the tire beads. For this reason, check rims for
damage at regular intervals. The rim flanges must be
checked for wear before a tire is mounted. Remove
burrs, if any.
recommended by the tire manufacturer, before the
characteristic tire wear pattern (shoulder wear on front
wheels and tread center wear on rear wheels) becomes
visible, as otherwise the driving properties deteriorate.
Check and ensure proper tire inflation pressure after
rotating the wheels. For tire inflation pressure see
inside of fuel filler flap and also page 259.
Important!
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
251
Tires, Wheels
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tires, Wheels
Spare wheel
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
Spare wheel CLK 320
Important!
If the arrow on tire side wall does not point in direction
of vehicle forward movement when using the spare
wheel, observe the following restriction:
The spare wheel rim is mounted with a full size tire of
the same type as on the vehicle, and is fully functional.
However, that spare wheel rim is weight optimized and
has a limited service life of 12 000 miles (20 000 km)
use before a standard wheel rim must replace it.
• Drive to the nearest tire repair facility as soon as
possible.
For rim and tire specifications, refer to “Technical Data”
In the case of a flat tire, you may temporarily use the
spare wheel.
Warning!
Do not operate vehicle with more than one spare wheel
mounted.
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.
252
Download from Www.Somanuals.com. All Manuals Search And Download.
Spare wheel CLK 430
Do not operate vehicle with more than one spare wheel
mounted.
Important!
The spare wheel rim size is 71/2 J x 17 H 2.
Unidirectional tires must always be mounted with arrow
on tire sidewall pointing in direction of vehicle forward
movement.
The spare wheel rim is mounted with a full size tire of
the same type as on the vehicle’s front axle, and is fully
functional. However, that spare wheel rim is weight
optimized and has a limited service life of 12 000 miles
(20 000 km) use before a standard wheel rim must
replace it.
For rim and tire specifications, refer to “Technical Data”
Warning!
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.
If the arrow on tire side wall does not point in direction
of vehicle forward movement when using the spare
wheel, observe the following restriction:
The dimensions of the spare wheel are different
from those of the road wheels for the rear axle. As a
result, the vehicle handling characteristics change
when driving with a spare wheel mounted on the
rear axle.
• Drive to the nearest tire repair facility as soon as
possible.
In the case of a rear axle flat tire, you may temporarily
use the spare wheel, when observing the following
restrictions:
The spare wheel should only be used temporarily,
and replaced with a regular road wheel as quick as
possible.
• Do not exceed vehicle speed of 50 mph (80 km/h)
• Drive to the nearest tire repair facility to have the
flat tire repaired or replaced as appropriate.
253
Tires, Wheels
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tires, Wheels
Changing wheels
Move vehicle to a level area which is a safe distance
from the roadway.
Warning!
Warning!
The jack is designed exclusively for jacking up the
vehicle at the jack tubes built into either side of the
vehicle. To help avoid personal injury, use the jack
only to lift the vehicle during a wheel change.
Never get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from the area
under the lifted vehicle. Always firmly set parking
brake and block wheels before raising vehicle with
jack.
Before working on the vehicle, e.g. when changing
wheels, the roll bar should be raised with the
switch, and the electronic key be removed from the
steering lock, to prevent possible injury.
1. Set parking brake and turn on hazard warning
flasher.
2. Move selector lever to position “P” and turn off
engine.
Do not disengage parking brake while the vehicle is
raised. Be certain that the jack is always vertical
when in use, especially on hills. Always try to use
the jack on level surface. Be sure that the jack arm
is fully inserted in the jack tube. Always lower the
vehicle onto sufficient capacity jackstands before
working under the vehicle.
3. Prevent vehicle from rolling away by blocking
wheels with wheel chocks (not supplied with
vehicle) or sizable wood block or stone. When
changing a wheel on a hill, place chocks on the
downhill side blocking both wheels of the other
axle. On a level road, place one chock in front of and
one behind the wheel that is diagonally opposite to
the wheel being changed.
254
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Using the wrench, loosen but do not yet remove the
wheel bolts.
5. Remove the protective cover from the jack support
tube opening by inserting the screwdriver (supplied
in the tool kit) in the opening and prying it out.
The tube openings are located directly behind the
front wheel housings and in front of the rear wheel
housings.
255
Tires, Wheels
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tires, Wheels
CLK 430 shown
6. Insert jack arm fully into the tube hole up to the
stop. Place jack on firm ground. Position the jack so
that it is always vertical (plumb-line) as seen from
the side (see arrow), even if the vehicle is parked on
an incline.
The tube openings are located directly behind the front wheel
housing and in front of the rear wheel housings.
7. Jack up the vehicle until the wheel is clear of the
ground. Never start engine while vehicle is raised.
256
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Tires, Wheels
1
P40.10-2167-26
8. Unscrew upper-most wheel bolt and install
alignment bolt (1) supplied in the tool kit. Remove
the remaining bolts. Keep bolt threads protected
from dirt and sand.
10. Clean contact surfaces of wheel and wheel hub.
Install wheel on wheel hub. Insert wheel bolts and
tighten them slightly.
To avoid paint damage, place wheel flat against hub
and hold it there while installing first wheel bolt.
9. Remove wheel. Grip wheel from the sides. Keep
hands from beneath the wheels.
Unscrew the alignment bolt (1) to install the last
wheel bolt.
257
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning!
Always replace wheel bolts that are damaged or
rusted.
Never apply oil or grease to wheel bolts.
4
2
Damaged wheel hub threads should be repaired
immediately.
3
5
Incorrect mounting bolts or improperly tightened
mounting bolts can cause the wheel to come off.
This could cause an accident. Be sure to use the
correct mounting bolts.
Warning!
11. Lower vehicle. Remove jack and insert jack tube
cover.
The spare wheel rim is for temporary use only. Use
for over a total of 12 000 miles (20 000 km)
(aggregate of all uses) may cause wheel rim failure
leading to an accident and possible injuries.
12. Using the wrench, tighten the five bolts evenly,
following the sequence illustrated, until all bolts are
tight.
Observe a tightening torque of 80 ft.lb. (110 Nm).
13. Ensure proper tire pressure.
258
Tires, Wheels
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Tire inflation pressure
Tire pressures listed for light loads are minimum values
offering high driving comfort. Increased inflation
pressures for heavy loads produce favorable handling
characteristics with lighter loads and are perfectly
permissible. The ride of the vehicle, however, will
become somewhat harder.
A table (see fuel filler flap) lists the tire inflation
pressures specified for Mercedes-Benz recommended
tires as well as for the varying operating conditions.
Important!
Tire temperature and pressure increase with the vehicle
speed. Tire pressure should therefore only be checked
and corrected on cold tires. Correct tire pressure in
warm tires only if pressure has dropped below the
pressure listed in the table and the respective operating
conditions are taken into consideration.
Tire pressure changes by approx. 1.5 psi (0.1 bar) per
18°F (10°C) of air temperature change. Keep this in
mind when checking tire pressure inside a garage –
especially in the winter.
Example:
If garage temperature = approx. +68°F (+20°C) and
ambient temperature = approx. +32°F (0°C) then the
adjusted air pressure = specified air pressure +3 psi
(+0.2 bar).
An underinflated tire due to a slow leak (e.g. due to a
nail in the tire) may cause damage such as tread
separation, bulging etc.. Regular tire pressure checks
(including the spare tire) at intervals of no more than
14 days are therefore essential.
259
Tires, Wheels
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Warning!
Car care
Index
Tires, Wheels
If a tire constantly loses air, it should be inspected for
damage.
Do not overinflate tires. Overinflating tires can
result in sudden deflation (blowout) because they
are more likely to become punctured or damaged
by road debris, potholes etc.. Follow recommended
inflation pressures.
The spare tire should be checked periodically for
condition and inflation. Spare tire will age and become
worn over time even if never used, and thus should be
inspected and replaced when necessary.
Do not overload the tires by exceeding the specified
vehicle capacity weight (as indicated by the label
on the driver’s door latch post). Overloading the
tires can overheat them, possibly causing a
blowout.
260
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Battery
Battery
Therefore, we strongly recommend that you have the
battery charge checked frequently, and corrected if
necessary, especially if you use the vehicle less than
approximately 200 miles (300 km) per month,
mostly for short distance trips, or if it is not used for
long periods of time.
Warning!
Failure to follow these instructions can result in
severe injury or death.
Never lean over batteries while connecting, you
might get injured.
Only charge a battery with a battery charger after the
battery has been disconnected from the vehicle’s
electrical circuit.
Battery fluid contains sulfuric acid. Do not allow
this fluid to come in contact with eyes, skin or
clothing. In case it does, immediately flush affected
area with water and seek medical help if necessary.
Always disconnect the battery negative lead first and
connect last.
A battery will also produce hydrogen gas, which is
flammable and explosive. Keep flames or sparks
away from battery, avoid improper connection of
jumper cables, smoking etc..
When removing and connecting the battery, always
make sure that all electrical consumers are off and the
electronic key is in steering lock position 0. The battery
and its filler caps must always be securely installed
when the vehicle is in operation. During removal and
installation always protect the disconnected battery
positive (+) terminal with the cover attached to the
battery.
Important!
Battery replacement information:
The maintenance-free battery is located in the trunk
under the trunk floor.
While the engine is running the battery terminal clamps
must not be loosened or detached, otherwise the
generator and other electronic components would be
damaged.
The service life of the battery is dependent on its
condition of charge. The battery should always be kept
sufficiently charged, in order to last an optimum length
of time.
261
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Battery recycling
resynchronize the
After reconnecting the battery also
front seats,
the express
Batteries contain material that can harm the
environment with improper disposal.
front seat head restraints (see page 50),
feature of the power windows (see page 144),
and the
electronic stability program (ESP) (see page 209).
Large 12 Volt storage batteries contain lead.
Recycling of batteries is the preferred method of
disposal.
If the soft top is in a half open position, it also has to be
synchronized. To do so, raise and lock soft top manually
(see page 280).
Many states require sellers of batteries to accept old
batteries for recycling.
262
Battery
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Jump starting
Jump starting
If the battery is discharged, the engine should be started
with jumper cables and the (12 V) battery of another
vehicle.
Warning!
Failure to follow these directions will cause
damage to the electronic components, and can lead
to a battery explosion and severe injury or death.
Only use 12 V battery to jump start your vehicle. Jump
starting with more powerful battery could damage the
vehicle’s electrical systems, which will not be covered
by the Mercedes-Benz Limited Warranty.
Never lean over batteries while connecting or jump
starting, you might get injured.
The battery is located in the trunk under the trunk floor.
Battery fluid contains sulfuric acid. Do not allow
this fluid to come in contact with eyes, skin or
clothing. In case it does, immediately flush affected
area with water, and seek medical help if
necessary.
Proceed as follows:
1. Position the vehicle with the charged battery so that
the jumper cables will reach, but never let the
vehicles touch. Make sure the jumper cables do not
have loose or missing insulation.
A battery will also produce hydrogen gas, which is
flammable and very explosive. Keep flames or
sparks away from battery, avoid improper
connection of jumper cables, smoking etc..
2. On both vehicles:
Read all instructions before proceeding.
• Turn off engine and all lights and accessories,
except hazard warning flashers or work lights.
• Apply parking brake and shift selector lever to
position “P”.
263
Download from Www.Somanuals.com. All Manuals Search And Download.
Important!
Important!
A discharged battery can freeze at approx. +14°F
(–10°C). In that case, it must be thawed out before
jumper cables are used. Attempting to jump start a
frozen battery can result in it exploding, causing
personal injury.
3. Clamp one end of the first jumper cable to the
positive (+) under hood terminal of the discharged
battery and the other end to the positive (+) terminal
of the charged battery. Make sure the cable clamps
do not touch any other metal parts.
Jumper cable specifications:
• Minimum cable cross-section of 25 mm2 or approx.
4. Clamp one end of the second jumper cable to the
grounded negative (–) terminal of the charged
battery and the final connection to the negative (–)
terminal (2) of the discharged battery.
2 AWG
• Maximum length of 11.5 ft. (3.5 m).
Important!
5. Start engine of the vehicle with the charged battery
and run at high idle. Make sure the cables are not
on or near pulleys, fans, or other parts that move
when the engine is started. Allow the discharged
battery to charge for a few minutes. Start engine of
the disabled vehicle in the usual manner.
Notes:
If engine does not run after several unsuccessful
starting attempts, have it checked at the nearest
authorized Mercedes-Benz Center.
Excessive unburned fuel may damage the catalytic
converter.
6. After the engine has started, remove jumper cables
by exactly reversing the above installation
sequence, starting with the last connection made
first. When removing each clamp, make sure that it
does not touch any other metal while the other end
is still attached.
264
Jump starting
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Towing
Towing the vehicle
Prior to towing the vehicle with all wheels on the
ground, make certain that the electronic key is in
steering lock position 2.
If the electronic key is left in the steering lock
position 0 for an extended period of time, it can no
longer be turned in the lock. In this case, the
steering is locked. To unlock, remove electronic key
from steering lock and reinsert.
Important!
P88.20-2026-26
When towing the vehicle, please, note the following:
The rear towing eye is located at the right, below the
bumper. The front towing eye is located on the
passenger side behind a cover in the bumper panel.
With the automatic central locking activated and the
electronic key in steering lock position 2, the vehicle
doors lock if the left front wheel as well as the right rear
wheel are turning at vehicle speeds of approx. 9 mph
(15 km/h) or more.
CLK 320:
Cover removal:
Insert finger in recess of cover and pull cover out.
To prevent the vehicle door locks from locking,
deactivate the automatic central locking, see page 37.
Cover installation:
Engage cover at bottom and press in top securely.
265
Download from Www.Somanuals.com. All Manuals Search And Download.
We recommend that the vehicle be transported using
flat bed equipment. This method is preferable to other
types of towing.
The vehicle may be towed with all wheels on the ground
and the selector lever in position “N” for distances up to
30 miles (50 km) and at a speed not to exceed 30 mph
(50 km/h). The electronic key must be in steering lock
position 2.
To be certain to avoid a possibility of damage to the
transmission, however, we recommend the drive shaft
be disconnected at the rear axle drive flange for any
towing beyond a short tow to a nearby garage.
P88.20-2027-26
Do not tow with sling-type equipment. Towing with
sling-type equipment over bumpy roads will damage
radiator and supports.
CLK 430:
Cover removal:
Hold left and right end of grille and pull out.
Use wheel lift, dolly, or flat bed equipment, with
electronic key in steering lock turned to position 0.
Cover installation:
Engage left and right end of grille and press in securely.
Warning!
With the engine not running, there is no power
assistance for the braking and steering systems. In
this case, it is important to keep in mind that a
considerably higher degree of effort is necessary to
brake and steer the vehicle.
266
Towing
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Caution!
Car care
Index
Towing
Note:
If the vehicle is towed with the front axle raised, the
engine must be shut off (electronic key in steering lock
position 0 or 1). Otherwise, the ESP will immediately be
engaged and will apply the rear wheel brakes. Switch off
To signal turns while being towed with hazard warning
flasher in use, turn electronic key in steering lock to
position 2 and activate combination switch for left or
right turn signal in usual manner – only the selected
turn signal will operate.
the tow-away alarm as well as the ESP
.
Upon canceling the turn signal, the hazard warning
flasher will operate again.
267
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmission selector lever, manually unlocking
To do so, insert a pin (1), e.g. ball point pen, into the
covered opening below the position “D” of the shift
pattern. While pushing the pin down, move selector
lever from position “P”.
After removal of the pin from the opening, the cover will
not close fully. Only after moving the selector lever to
positions “D+” and “D–” does the cover return to its
closed position.
In the case of power failure the transmission selector
lever can be manually unlocked, e.g. to tow the vehicle.
268
Towing
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamps
Notes:
Bulbs
To prevent a possible electrical short circuit, switch off
lamp prior to replacing a bulb.
Headlamp adjustment
When replacing bulbs, install only 12 volt bulbs with
the specified watt rating.
Correct headlamp adjustment is extremely important.
Check and readjust headlamps at regular intervals and
when a bulb has been replaced.
When replacing halogen bulbs do not touch glass
portion of bulb with bare hands. Use plain paper or a
clean cloth.
For adjusting headlamp aim see page 274.
Replacing bulbs
Warning!
Warning!
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
Bulbs and bulb holders can be very hot. Allow the
lamp to cool down before changing a bulb.
Halogen lamps contain pressurized gas. A bulb can
explode if you:
• touch or move it when hot,
• drop the bulb,
• scratch the bulb.
Wear eye and hand protection.
269
Download from Www.Somanuals.com. All Manuals Search And Download.
Headlamp assembly (Halogen)
Headlamp assembly (Xenon)
4
4
1
1
6
6
5
5
7
7
2
2
3
3
P82.10-2394-26
P82.10-2395-26
1 Headlamp vertical adjustment screw
4 Bulb socket for turn signal lamp
2 Cover for low beam headlamp
5 Electrical connector for low beam headlamp bulb
6 Electrical connector for high beam headlamp bulb
7 Bulb socket for parking and standing lamp
3 Cover for high beam headlamp, parking and
standing lamp
270
Exterior lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamps
Bulbs for low or high beam
H7 (55 W)
Turn signal lamp
1156 NA (26.9/5 W/32/4 cp bulb)
Open hood.
Open hood.
Rotate cover (2 or 3) counterclockwise and remove. Pull
off electrical connector (5 or 6). Unhook clamping ring
and remove bulb.
Twist bulb socket (4) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Insert new bulb (seating properly in cutouts of bulb
socket), mount clamping ring. Reinstall and push
electrical connector on securely.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.
Reinstall cover (2 or 3).
Parking and standing lamp
H 6W (6 W bulb)
Xenon (optional)
Bulb for low beam
Open hood.
Rotate cover (3) counterclockwise and remove.
Warning!
Twist bulb socket (7) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.
Reinstall cover (3).
271
Download from Www.Somanuals.com. All Manuals Search And Download.
Taillamp assemblies
4
1
3
5
2
P82.10-2080-26
P82.10-2083-26
4 Driver’s side:
Open trunk lid.
Rear fog lamp (21 W/32 cp bulb)
Swing cover aside (bulbs 1, 2 and 3).
5 Backup lamp (21 W/32 cp bulb)
1 Turn signal lamp (21 W/24 cp bulb)
Twist bulb socket counterclockwise and pull out. Push
bulb into socket, turn counterclockwise and remove.
2 Stop, tail, parking, and side marker lamp
(21/4 W bulb)
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Close cover (bulbs 1, 2 and 3).
3 Tail and parking lamp (5 W/4 cp bulb)
272
Exterior lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamps
Side marker lamp, front (5 W/4 cp bulb)
Carefully slide lamp towards front (arrow), and remove
back and first.
Twist bulb socket counterclockwise and pull out. Push
bulb socket, turn counterclockwise and remove.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket, push in and twist clockwise.
To reinstall lamp, set front end of lamp in bumper and
let back end snap into place.
273
Download from Www.Somanuals.com. All Manuals Search And Download.
High mounted stop lamp,
Adjusting headlamp aim
Additional turn signals on the exterior mirror
Correct headlamp adjustment is extremely important.
To check and readjust a headlamp, follow steps 1
through 5.
The high mounted stop lamp (3rd brake lamp), and the
additional turn signals on the exterior mirrors are
equipped with LEDs.
Please note:
Have the system checked at an authorized
Mercedes-Benz Center if a fault or defect occurs.
• Low beam adjustments simultaneously aim the high
beam.
• Vehicle should have a normal trunk load.
1. Park vehicle on level surface approximately 25 ft.
(7.6 m) from a vertical test screen or wall. The
centerline of the vehicle must be at a 90° angle to
the test screen.
274
Exterior lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Exterior lamps
275286
10
N82.10-2396-26
2. (Low beams on):
3. (Low beams off):
Using a carpenter’s level, align and mark a vertical
centerline (8) on the test screen using the vertex of
the angle formed in each beam image. As a check,
the distance between centerlines should be
49 1/4 inches (1250 mm). If the distance does not
check, have the system verified at an authorized
Mercedes-Benz Center.
Measure the vertical height from the floor to
reference point (10) on high beam lens. Subtract
approx. 2 inches (53 mm) from measurement, and
mark a horizontal centerline (9) on the test screen at
the resulting height from the floor. It must be at a
90° angle to the vertical centerline.
4. Open hood.
275
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Vertical headlamp aim (low beams on):
Turn adjusting screw (1) (counterclockwise to adjust
headlamp downward, clockwise upward) until the
headlamps illuminate the test screen as shown. The
vertex of the angle formed in each beam image
should align with the vertical and horizontal
centerlines (8 and 9).
The left and right headlamps must be adjusted
individually.
Note:
If it is not possible to obtain a proper headlamp
adjustment, have the system checked at your authorized
Mercedes-Benz Center.
276
Exterior lamps
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Electronic main key
Changing batteries in the electronic main key
1 Transmit buttons
Changing batteries
2 Lamp for battery check and function control
Move locking tab (3) in direction of right arrow and
remove mechanical key (4, left arrow).
Checking batteries
If one of the transmit buttons (1) is pressed, the battery
check lamp (2) lights up briefly – indicating that the
batteries are in order.
Change batteries if the battery check lamp (2) does not
light up briefly.
277
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert mechanical key (4) in side opening (5) to open
latch. Press briefly (do not use mechanical key as lever)
to release battery compartment.
Change batteries (9), inserting new ones under contact
spring (10) with plus (+) side facing up.
Return battery compartment into housing until locked
in place.
Remove mechanical key from side opening.
Lift battery compartment in direction of
arrow (7) and remove in direction of arrow (8).
278
Electronic main key
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Electronic main key
Important!
Synchronizing remote control
Batteries contain materials that can harm the
environment if disposed of improperly. Recycling of
batteries is the preferred method of disposal. For
disposal, please follow manufacturer’s recommendation
on battery package.
The remote control may have to be resynchronized, if
the vehicle cannot be locked or unlocked.
To synchronize insert electronic key in steering lock.
The remote control should once again be operational.
Replacement Battery:
Lithium, type CR 2025 or equivalent.
279
Download from Www.Somanuals.com. All Manuals Search And Download.
Raising soft top manually
Important!
In case of malfunction, the power soft top can also be
raised manually. This procedure should be performed
with great care by two persons.
Ensure that the trunk lid is closed while raising the soft
top manually. Otherwise there is the possibility of
contact between the trunk lid and the soft top
compartment cover.
We recommend to take off your watch or other jewelry to
prevent personal injury.
Warning!
A combination open-end/hex-socket wrench in the
vehicle tool kit is required for this job.
Do not place your hands near the roll bar, soft top
frame, upper windshield area or soft top storage
compartment or between the soft top rods while the
soft top is being raised and locked.
1. Engage parking brake.
2. Lower windows and open doors.
3. Lower roll bar with roll bar switch.
Note:
Serious personal injury may occur.
If the roll bar cannot be lowered, carefully guide the
soft top across the roll bar. Lift the rear window over
the roll bar.
4. For safety reasons, remove electronic key from
steering lock.
280
Emergency operation of soft top
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Emergency operation of soft top
1
P65.10-2009-26
P77.30-2031-26
5. Unlock soft top storage compartment:
6. Place open-end wrench (1) (supplied in vehicle tool
kit) on bolt between backrest and soft top
compartment cover. Turn wrench (1) in direction of
arrow to its stop and remove.
Open trunk lid with mechanical key and lift
protection cover.
Using screwdriver (supplied in vehicle tool kit), turn
screw two turns counterclockwise to the stop.
Close trunk lid.
Important!
Do not place mechanical key inside trunk, since trunk is
locked again when closing the lid.
281
Download from Www.Somanuals.com. All Manuals Search And Download.
2
4
3
P77.30-2034-26
P77.30-2029-26
7. Open soft top compartment cover (2) and place in
upright position.
8. Move soft top toward windshield header (arrow).
Warning!
Place hands from below on upper section of soft
top (3) and pull hard to move soft top (4) out of its
storage compartment.
Do not place your hands in areas marked X.
Serious personal injury may occur.
282
Emergency operation of soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Emergency operation of soft top
6
4
5
2
1
P77.30-2030-26
P77.30-2033-26
9. Do not place soft top frame (5) onto windshield
header.
12. Lock soft top storage compartment:
Place open-end wrench (1) on bolt between backrest
and soft top compartment cover. Turn wrench (1) in
direction of arrow to its stop and remove.
10. Place rear window section of soft top (6) in its
vertical position.
11. Close soft top compartment cover (2) by placing
hands near edges (arrows). The soft top
compartment cover must lock in the first notch of
compartment cover catch.
283
Download from Www.Somanuals.com. All Manuals Search And Download.
6
P77.30-2032-26
13. Lower rear window section of soft top (6).
15. Insert hex-socket wrench (7) to lock the soft top bow.
14. Open trunk lid with mechanical key and carefully
guide luggage cover into its storage compartment.
Press soft top bow down onto soft top compartment
cover.
Insert and turn wrench in direction of arrow (8) to
lock soft top bow.
284
Emergency operation of soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Emergency operation of soft top
10
9
P65.10-2009-26
16. Using screwdriver (supplied in vehicle tool kit), turn
screw clockwise to the stop.
18. Press lock button (9) and fold down locking
handle (10).
17. Close trunk lid.
Important!
Do not place mechanical key inside trunk, since trunk is
locked again when closing the lid.
285
Download from Www.Somanuals.com. All Manuals Search And Download.
19. Turn locking handle 90° clockwise and pull soft top
frame carefully down until it meets the windshield
header attachment points.
Turn locking handle counterclockwise to the stop to
lock the soft top.
Fold locking handle up until lock button engages.
Note:
Have the soft top operation checked at your authorized
Mercedes-Benz Center as soon as possible.
286
Emergency operation of soft top
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Manual release for fuel filler flap
Antenna
Manual release for fuel filler flap
P80.20-2051-26
The non-retractable antenna should be removed before
entering an automatic car wash, to avoid damage to the
antenna mast or vehicle paint finish.
The manual release knob is located behind the right
side trunk panel.
In case the central locking system does not release the
fuel filler flap, pull the manual release knob while
simultaneously opening the fuel filler flap.
Do not use tools (e.g. pliers) for the antenna mast
removal.
To remove:
Unscrew antenna counterclockwise (1).
To install:
287
Carefully position antenna mast on threaded socket and
turn clockwise (2) until hand tight.
Download from Www.Somanuals.com. All Manuals Search And Download.
Trunk lamp
Replacing wiper blade insert
For safety reasons, remove electronic key from steering
lock before replacing the wiper blade, otherwise the
motor can suddenly turn on and cause injury.
Notes:
Do not open engine hood with wiper arm folded forward.
Do not allow the wiper arm to contact the windshield
glass without a wiper blade inserted. The glass may be
scratched or broken.
Make certain that the wiper blade is properly installed.
An improperly installed wiper blade may cause
windshield damage.
P82.20-2029-26
If the trunk is to remain open for a long period of time,
the trunk lamp can be switched off by pulling out the
plunger in the switch (arrow). This prevents the vehicle
battery from being discharged.
When the trunk lid is closed, the switch will reset and
turn on the lamp next time the lid is opened.
288
Trunk lamp
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Replacing wiper blade insert
1
2
3
P82.30-0333-26
Removal:
Installation:
Fold wiper arm forward. Press safety tab down (1), push
wiper blade downward (2) and remove.
Slide (direction of arrow) wiper blade insert into
retainer claws until tabs are engaged.
Place wiper blade on firm support. Press down both tabs
and slide (direction of arrow) the wiper blade insert out
of the retainer claws.
Insert wiper blade between tabs (3) on the wiper arm,
and slide into end of wiper arm. Press safety tab upward
until it locks in place.
289
Download from Www.Somanuals.com. All Manuals Search And Download.
290
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle care
Instrument cluster
294
295
295
295
295
296
296
297
298
298
Cleaning and care of the vehicle
Engine cleaning
Vehicle washing
Power washer
Plastic and rubber parts
Tar stains
Window cleaning
Headlamps, taillamps, turn signal lenses
Wiper blade
292
293
293
293
293
294
294
294
294
294
294
Steering wheel and gear selector lever
Hard plastic trim items
Upholstery
Ornamental moldings
Paintwork, painted body components
Light alloy wheels
Soft top
Wind screen
Rubber weatherstrip
Seat belts
Headliner
291
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Cleaning and care of the vehicle
Cleaning and care of the vehicle
More frequent washings are necessary to deal with
unfavorable conditions; for example, near the ocean, in
industrial areas (smoke, exhaust emissions), or during
winter operation.
Warning!
Many cleaning products can be hazardous. Some
are poisonous, others are flammable. Always follow
the instructions on the particular container.
Always open your vehicle’s doors or windows when
cleaning the inside.
You should check your vehicle from time to time for
stone chipping or other damage. Any damage should be
repaired as soon as possible to prevent the start of
corrosion.
Never use fluids or solvents that are not designed
for cleaning your vehicle.
In doing so, do not neglect the underside of the vehicle.
A prerequisite for a thorough check is a washing of the
underbody followed by a thorough inspection. Damaged
areas need to be reundercoated.
In operation, your vehicle is subjected to varying
external influences which, if gone unchecked, can
attack the paintwork as well as the underbody and
cause lasting damage.
Your vehicle has been treated at the factory with a wax-
base rustproofing in the body cavities which will last for
the lifetime of the vehicle. Post-production treatment is
neither necessary nor recommended by Mercedes-Benz
because of the possibility of incompatibility between
materials used in the production process and others
applied later.
Such damage is caused not only by extreme and varying
climatic conditions, but also by air polution, road salt,
tar, gravel and stone chipping. Grease and oil, fuel,
coolant, brake fluid, bird droppings, insects, tree resins
etc. should be removed immediately to avoid paint
damage. Frequent washing reduces and/or eliminates
the aggressiveness and potency of the above adverse
influences.
We have selected car-care products and compiled
recommendations which are specially matched to our
vehicles and which always reflect the latest technology.
You can obtain Mercedes-Benz approved car-care
products at your authorized Mercedes-Benz Center.
292
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle washing
Scratches, corrosive deposits, corrosion or damage due
to negligent or incorrect care cannot always be removed
or repaired with the car-care products recommended
here. In such cases it is best to seek aid at your
authorized Mercedes-Benz Center.
Do not use hot water or wash your vehicle in direct
sunlight. Use only a mild car wash detergent, such as
Mercedes-Benz approved Car Shampoo.
Thoroughly spray the vehicle with a diffused jet of
water. Direct only a very weak spray towards the
ventilation intake. Use plenty of water and rinse the
sponge and chamois frequently.
The following topics deal with the cleaning and care of
your vehicle and give important “how-to” information as
well as references to Mercedes-Benz approved car-care
products.
Rinse with clear water and thoroughly wipe dry with a
chamois. Do not allow cleaning agents to dry on the
finish.
Additional information can be found in the booklet titled
“Vehicle Care Guide”.
In the winter, thoroughly remove all traces of road salt
as soon as possible.
Engine cleaning
When washing the underbody, do not forget to clean the
inner sides of the wheels.
Prior to cleaning the engine compartment make sure to
protect electrical components and connectors from the
intrusion of water and cleaning agents.
Plastic and rubber parts
Corrosion protection, such as MB Anticorrosion Wax
should be applied to the engine compartment after
every engine cleaning. Before applying, all control
linkage bushings and joints should be lubricated. The
poly-V-belt and all pulleys should be protected from any
wax.
Do not use oil or wax on these parts.
293
Cleaning and care of the vehicle
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Seat belts
Car care
Index
Cleaning and care of the vehicle
Tar stains
The webbing must not be treated with chemical
cleaning agents. Use only clear, lukewarm water and
soap. Do not dry the webbing at temperatures above
176°F (80°C) or in direct sunlight.
Quickly remove tar stains before they dry and become
more difficult to remove. A tar remover is
recommended.
Window cleaning
Warning!
Use a window cleaning solution on all glass surfaces. An
automotive glass cleaner is recommended.
Do not bleach or dye seat belts as this may severely
weaken them. In a crash they may not be able to
provide adequate protection.
Headlamps, taillamps, turn signal lenses
Use a mild car wash detergent, such as Mercedes-Benz
approved Car Shampoo, with plenty of water.
Headliner
Clean with soft bristle brush, or use a dry-shampoo
cleaner in case of excessive dirt.
To prevent scratches, never apply strong force and use
only a soft, non-scratchy cloth when cleaning the lenses.
Do not attempt to wipe dirty lenses with a dry cloth or
sponge.
Instrument cluster
Use a gentle dishwashing detergent or mild detergent
for delicate fabrics as a washing solution. Wipe with a
cloth moistened in lukewarm solution. Do not use
scouring agents.
Wiper blade
Clean the wiper blade rubber with a clean cloth and
detergent solution.
294
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Cleaning and care of the vehicle
Leather Upholstery
Steering wheel and gear selector lever
Wipe leather upholstery with a damp cloth and dry
thoroughly or clean with Mercedes-Benz approved
Leather Care. Exercise particular care when cleaning
perforated leather as its underside should not become
wet.
Wipe with a damp cloth and dry thoroughly or clean
with Mercedes-Benz approved Leather Care.
Hard plastic trim items
MB Tex Upholstery
Pour Mercedes-Benz approved Interior Care onto soft
lint-free cloth and apply with light pressure.
Pour Mercedes-Benz approved Interior Care onto soft
lint-free cloth and apply with light pressure.
Upholstery
Ornamental Moldings
For regular cleaning and care of very dirty chrome-
plated parts, use a chrome cleaner.
Using aftermarket seat covers or wearing clothing that
have the tendency to give off coloring (e.g. when wet
etc.) may cause the upholstery to become permanently
discolored. By lining the seats with a proper
intermediate cover, contact-discoloration will be
prevented.
295
Download from Www.Somanuals.com. All Manuals Search And Download.
Paintwork, painted body components
Light alloy wheels
Mercedes-Benz approved Paint Care should be applied
when water drops on the paint surface do not “bead up”,
normally in 3 to 5 months, depending on climate and
washing detergent used.
Mercedes-Benz approved Wheel Care should be used for
regular cleaning of the light alloy wheels.
If possible, clean wheels once a week with Mercedes-
Benz approved Wheel Care, using a soft bristle brush
and a strong spray of water.
Mercedes-Benz approved Paint Cleaner should be
applied if paint surface shows signs of dirt embedding
(i.e. loss of gloss).
Follow instructions on container.
Do not apply any of these products or wax if your
vehicle is parked in the sun or if the hood is still hot.
Note:
Use only acid-free cleaning materials. The acid could
lead to corrosion.
Use the appropriate MB-Touch-Up Stick for quick and
provisional repairs of minor paint damage (i.e. chips
from stones, vehicle doors etc.).
296
Cleaning and care of the vehicle
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Cleaning and care of the vehicle
Soft top
Notes:
When you run the vehicle through an automatic car
wash, never use hot-wax for conservation.
Clean soft top with soft top raised and locked. Lower the
soft top into the storage compartment only if the soft top
is completely dry. If the soft top is kept in the storage
compartment for a lengthy period, raise it and air out
with the windows open about every 4 months.
Depending on the operation mode of the car wash, there
is the possibility of water drops entering the vehicle’s
interior.
Never use a power washer to clean the soft top, as you
may damage the soft top material.
Dry cleaning:
Brush top (always from front to rear) with a soft-bristled
brush.
Remove bird droppings immediately. The organic acid
damages the material and causes the soft top to leak.
Wet cleaning:
In general, regular spraying or cleansing with clear
water is sufficient to keep the top clean.
Brush the dry top. Wash with a mild detergent and an
ample supply of lukewarm water by wiping with a soft-
bristled brush or sponge from front to rear. Then rinse
thoroughly with clear water.
Wash the top only when heavily soiled.
Light colored soft tops should be cleaned frequently to
prevent spots and dirt from setting in, which could stain
and discolor the soft top material permanently.
If only parts of the top have been washed, wet the entire
top and allow it to air-dry before lowering it into the
storage compartment.
Caution!
Do not use sharp-edged instruments for the removal of
ice and snow.
Never use any gasoline, thinner, tar and stain removers,
glass cleaner, or similar organic solvents to clean the
soft top or wind screen. They will cause damage which
is not covered by the Mercedes-Benz Limited Warranty.
297
Download from Www.Somanuals.com. All Manuals Search And Download.
Rubber weatherstrip
Wind screen
The door and windshield header rubber weatherstrip
material should be cared for at regular intervals with a
silicon-based car care product.
Use only water or mild detergent to clean the wind
screen.
298
Cleaning and care of the vehicle
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Spare parts service
Warranty coverage
Identification labels
Layout of poly-V-belt drive
Technical data
Fuels, coolants, lubricants etc. – capacities
Engine oils
Engine oil additives
Air conditioner refrigerant
Brake fluid
Premium unleaded gasoline
Fuel requirements
Gasoline additives
Coolants
Consumer information
Uniform tire quality grading
Index
300
300
301
302
303
307
309
309
309
309
310
310
311
311
313
313
315
299
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Technical data
Spare parts service
Warranty coverage
All authorized Mercedes-Benz Centers maintain a stock
of original spare parts required for maintenance and
repair work. In addition, strategically located parts
distribution centers provide quick and reliable parts
service.
Your vehicle is covered under the terms of the
“warranties” printed in the Service and Warranty
Information booklet and your authorized
Mercedes-Benz Center will exchange or repair any
defective parts originally installed on the vehicle in
accordance with the terms of the following warranties:
More than 300 000 different spare parts, for
Mercedes-Benz models, are available.
1. New vehicle limited warranty
2. Emission system warranty
3. Emission performance warranty
Mercedes-Benz original spare parts are subjected to
stringent quality inspections. Each part has been
specifically developed, manufactured or selected for and
adapted to Mercedes-Benz vehicles.
4. California, Massachusetts, and Vermont emission
control systems warranty
Therefore, Mercedes-Benz original spare parts should
be installed.
Replacement parts and accessories are covered by the
Mercedes-Benz Spare Parts and Accessories warranties,
copies of which are available at any Mercedes-Benz
Center.
Important!
The use of non-genuine parts and accessories not
authorized by Mercedes-Benz could damage the vehicle
which damage is not covered by the Mercedes-Benz
Limited Warranty or compromise its durability or safety.
Loss of Service and Warranty Information Booklet
Should you lose your Service and Warranty Information
booklet, have your authorized Mercedes-Benz Center
arrange for a replacement. It will be mailed to you.
300
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification labels
1
2
1 Certification label
2 Vehicle Identification Number (VIN)
When ordering spare parts, please specify vehicle
identification and engine numbers.
301
Technical data
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
3
7
4
6
5
302
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Model
CLK 320 (208 465)1
CLK 430 (208 470)1
Engine
112
113
Mode of operation
No. of cylinders
Bore
4-stroke engine, gasoline injection
4-stroke engine, gasoline injection
6
8
3.54 in (89.90 mm)
3.31 in (84.00 mm)
195.2 cu.in. (3199 cm3)
10:1
3.54 in (89.90 mm)
3.31 in (84.00 mm)
260.3 cu.in. (4265 cm3)
10:1
Stroke
Total piston displacement
Compression ratio
Output acc. to SAE J 1349
215 hp/5700 rpm
275 hp/5750 rpm
(160 kW/5700 rpm)
(205 kW/5750 rpm)
Maximum torque acc. to SAE J 1349
232 ft.lb/3000 rpm
(315 Nm/3000 rpm)
295 ft.lb/3200 rpm
(400 Nm/3200 rpm)
Maximum engine speed
Firing order
6000 rpm
1-4-3-6-2-5
2390 mm
6000 rpm
1-5-4-2-6-3-7-8
2390 mm
Poly-V-belt
1
The quoted data apply only to the standard vehicle. See an authorized Mercedes-Benz Center
for the corresponding data of all special bodies and special equipment.
303
Technical data
Instruments
and controls
Instrument
cluster display
Technical
Car care
Operation
Driving
Practical hints
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Technical data
Rims – Tires
Model
CLK 320
Model
CLK 430
Rims (light alloy)
Wheel offset
7 J x 16 H 2
1.46 in (37 mm)
Rims front axle
(AMG light alloy)
Wheel offset:
71/2 J x 17 H 2
1.46 in (37 mm)
All season tires:
Radial-ply tires
205/55 R 16 91 H
205/55 R 16 91 H M+S
Rims rear axle
(AMG light alloy)
Wheel offset:
81/2 J x 17 H 2
1.18 in (30 mm)
Winter tires:
Radial-ply tires
Radial-ply tires:
summer tires, front axle
summer tires, rear axle
225/45 R 17 91 W1
245/40 R 17 91 W2, 3
Spare wheel
Rim (light alloy)
Wheel offset:
7 J x 16 H 2
1.46 in (37 mm)
Spare wheel
All season tire:
Radial-ply tire
Rim (light alloy)
Wheel offset:
71/2 J x 17 H 2
1.46 in (37 mm)
205/55 R 16 91 H
Summer tire:
Radial-ply tire
225/45 R 17 91 W1
1
2
3
Also permissible 225/45 ZR 17
Also permissible 245/40 ZR 173
304
Must not be used with snow chains.
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical system
Model
CLK 320
CLK 430
Generator (alternator)
Starter motor
Battery
14 V/115 A
12V/1.7 kW
12V/100 Ah
14 V/150 A
12V/1.7 kW
12V/100 Ah
Spark plugs
Bosch F 8 DPER
Beru 14 FGH 8 DPUR X 2
NGK PFR 5 R-11
Bosch F 8 DPER
Beru 14 FGH 8 DPUR X 2
NGK PFR 5 R-11
Electrode gap
Tightening torque
0.039 in (1.0 mm)
15 – 22 ft.lb (20 – 30 Nm)
0.039 in (1.0 mm)
15 – 22 ft.lb (20 – 30 Nm)
Weights (see certification tag)
Trunk load max. 220 lb (100 kg)
305
Technical data
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Technical data
Main dimensions
Model
CLK 320
CLK 430
Overall vehicle length
Overall vehicle width
Overall height
Wheel base
180.2 in (4577 mm) 179.8 in (4567 mm)
67.8 in (1722 mm)
54.3 in (1380 mm)
67.8 in (1722 mm)
54.3 in (1380 mm)
105.9 in (2690 mm) 105.9 in (2690 mm)
Track, front
59.3 in (1505 mm)
58.0 in (1474 mm)
59.3 in (1505 mm)
58.6 in (1488 mm)
Track, rear
306
Download from Www.Somanuals.com. All Manuals Search And Download.
Fuels, coolants, lubricants etc. – capacities
Vehicle components and their respective lubricants must match. Therefore use only brands tested and recommended
by us. Please refer to the Factory Approved Service Products pamphlet, or inquire at your Mercedes-Benz Center.
Fuels, coolants, lubricants etc.
Model
Capacity
Engine with oil filter
8.5 US qt (8.0 l)
(recommended engine oils)
Automatic transmission
(automatic transmission fluid)
CLK 320
CLK 430
8.5 US qt (8.0 l)
9.6 US qt (9.1 l)
Rear axle
1.4 US qt (1.3 l)
(Hypoid gear oil SAE 90, 85 W 90)
Power steering
(MB Power steering fluid)
approx. 1.1 US qt (1.0 l)
approx. 2.1 oz (60 g) each
approx. 0.5 US qt (0.5 l)
Front wheel hubs
(high temperature roller bearing grease)
Brake system
(MB Brake fluid (DOT 4))
Cooling system
(MB Anticorrosion/antifreeze)
CLK 320
CLK 430
approx. 9.5 US qt (9.0 l)
approx. 11.7 US qt (11.1 l)
307
Fuels, coolants, lubricants etc. - capacities
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Fuels, coolants, lubricants etc. - capacities
Fuels, coolants, lubricants etc.
Model
Capacity
Windshield washer system
approx. 7.4 US qt (7.0 l)
(MB Windshield washer concentrate “S” 1)
Fuel tank
including a reserve of
approx. 16.4 US gal (62.0 l)
approx. 2.1 US gal (8.0 l)
(Premium unleaded gasoline:
Posted Octane 91 (Avg. of 96 RON/86 MON))
Air conditioner system
(R-134a refrigerant and special
PAC lubricant (Never R-12))
1
Use MB Windshield Washer Concentrate “S” and water for temperatures above freezing or MB Windshield Washer Concentrate “S” and
commercially available premixed windshield washer solvent/antifreeze for temperatures below freezing. Follow suggested mixing ratios, see
page 249.
308
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine oils
Air conditioner refrigerant
R-134a (HFC) refrigerant and special PAG lubricating oil
is used in the air conditioner system.
Engine oils are specifically tested for their suitability in
our engines. Therefore, use only engine oils
recommended by Mercedes-Benz. Information on
recommended brands is available at your authorized
Mercedes-Benz Center.
Never use R-12 (CFC) or mineral-based lubricating oil,
otherwise damage to the system will occur.
Please follow Service Booklet recommendations for
scheduled oil changes. Failure to do so could result in
engine damage not covered by the Mercedes-Benz
Limited Warranty.
Brake fluid
During vehicle operation, the boiling point of the brake
fluid is continuously reduced through the absorption of
moisture from the atmosphere. Under extremely hard
operating conditions, this moisture content can lead to
the formation of bubbles in the system thus reducing
the system’s efficiency.
Engine oil additives
Do not blend oil additives with engine oil. They may be
harmful to the engine operation.
The brake fluid must therefore be replaced every two
years, preferably in the spring.
Damage or malfunctions resulting from blending oil
additives are not covered by the Mercedes-Benz Limited
Warranty.
It is recommended to use only brake fluid approved by
Mercedes-Benz. Your authorized Mercedes-Benz Center
will provide you with additional information.
309
Fuels, coolants, lubricants etc.
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Fuels, coolants, lubricants etc.
Premium unleaded gasoline
Fuel requirements
Use only Premium unleaded meeting ASTM
standard D 439:
Caution!
To maintain the engine’s durability and performance,
premium unleaded gasoline must be used. If premium
unleaded is not available and low octane fuel is used,
follow these precautions:
The octane number (posted at the pump) must be
91 min. It is an average of both the Research (R) octane
number and the Motor (M) octane number: [(R+M)/2].
This is also known as ANTI-KNOCK INDEX.
• have the fuel tank filled only partially with unleaded
regular and fill up with premium unleaded as soon
as possible,
Unleaded gasoline containing oxygenates such as
Ethanol, IPA, IBA and TBA can be used provided the
ratio of any one of these oxygenates to gasoline does not
exceed 10%, MTBE not to exceed 15%.
• avoid full throttle driving and abrupt acceleration,
The ratio of Methanol to gasoline must not exceed 3%
plus additional cosolvents.
• do not exceed an engine speed of 3000 rpm, if the
vehicle is loaded with a light load such as two
persons and no luggage,
Using mixtures of Ethanol and Methanol is not allowed.
Gasohol, which contains 10% Ethanol and 90% unleaded
gasoline, can be used.
• do not exceed 2/3 of maximum accelerator pedal
position, if the vehicle is fully loaded or operating in
mountainous terrain.
These blends must also meet all other fuel requirements
such as resistance to spark knock, boiling range, vapor
pressure etc..
310
Download from Www.Somanuals.com. All Manuals Search And Download.
Gasoline additives
Coolants
A major concern among engine manufacturers is carbon
build up caused by gasoline. Mercedes-Benz
The engine coolant is a mixture of water and
anticorrosion/antifreeze, which provides:
recommends the use of only quality gasoline containing
additives that prevent the build up of carbon deposits.
• corrosion protection,
• freeze protection,
After an extended period of using fuels without such
additives, carbon deposits can build up especially on the
intake valves and in the combustion area, leading to
engine performance problems such as:
• boiling protection (by increasing the boiling point).
The cooling system was filled at the factory with a
coolant providing freeze protection to approximately
-22°F (-30°C) and corrosion protection.
• warm-up hesitation,
• unstable idle,
• knocking/pinging,
• misfire,
If the antifreeze mixture is effective to -22°F (-30°C), the
boiling point of the coolant in the pressurized cooling
system is reached at approximately 266°F (130°C).
The coolant solution must be used year round to provide
the necessary corrosion protection and increase in the
boil-over protection. You should have it replaced every
3 years.
• power loss.
Do not blend other specific fuel additives with fuel.
They only result in unnecessary cost, and may be
harmful to the engine operation.
To provide the important corrosion protection, the
solution must be at least 45% anticorrosion/antifreeze
(equals a freeze protection to approx. - 22°F [-30°C]). If
you use a solution that is more than 55% anticorrosion/
antifreeze (freeze protection to approx. - 49°F [-45°C]),
Damage or malfunctions resulting from poor fuel
quality or from blending specific fuel additives are not
covered by the Mercedes-Benz Limited Warranty.
311
311
Fuels, coolants, lubricants etc.
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Fuels, coolants, lubricants etc.
the engine temperature will increase due to the lower
heat transfer capability of the solution. Therefore, do not
use more than this amount of anticorrosion/antifreeze.
Before the start of the winter season (or once a year in
the hot southern regions), you should have the
anticorrosion/antifreeze concentration checked. The
coolant is also regularly checked each time you bring
your vehicle to your authorized Mercedes-Benz Center
for service.
If the coolant level is low, water and MB anticorrosion/
antifreeze should be used to bring it up to the proper
level (have cooling system checked for signs of leakage).
The water in the cooling system must meet minimum
requirements, which are usually satisfied by normal
drinking water. If your are not sure about the water
quality, consult your authorized Mercedes-Benz Center.
Anticorrosion/antifreeze quantity
Model
Approx. freeze protection
-35°F
(-37°C)
-49°F (
-45°C)
Anticorrosion/antifreeze
Your vehicle contains a number of aluminum parts. The
use of aluminum components in motor vehicle engines
necessitates that anticorrosion/antifreeze coolant used
in such engines be specifically formulated to protect the
aluminum parts. (Failure to use such anticorrosion/
antifreeze coolant will result in a significantly
shortened service life.)
CLK 320
CLK 430
4.8 US qt
(4.5 l)
5.3 US qt
(5.0 l)
5.9 US qt
(5.6 l)
6.5 US qt
(6.1 l)
Therefore the following product is strongly
recommended for use in your vehicle: Mercedes-Benz
Anticorrosion/antifreeze agent.
312
312
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer information
may depart significantly from the norm due to
variations in driving habits, service practices and
differences in road characteristics and climate.
This has been prepared as required of all manufactures
of passenger cars under Title 49, Code of U.S. Federal
Regulations, Part 575 pursuant to the “National Traffic
and Motor Vehicle Safety Act of 1966”.
Traction
The traction grades, from highest to lowest are AA, A, B,
and C. Those grades represent the tire’s ability to stop
on wet pavement as measured under controlled
conditions on specified government test surfaces of
asphalt and concrete. A tire marked C may have poor
traction performance.
Uniform tire quality grading
Quality grades can be found where applicable on the
tire sidewall between tread shoulder and maximum
section width. For example:
Warning!
Tread wear 200 Traction AA
Temperature A
The traction grade assigned to this tire is based on
straightahead braking traction tests, and does not
include acceleration, cornering, hydroplaning, or
peak traction characteristics.
All passenger vehicle tires must conform to federal
safety requirements in addition to these grades.
Treadwear
The treadwear grade is a comparative rating based on
the wear rate of the tire when tested under controlled
conditions on a specified government test course. For
example, a tire graded 150 would wear one and one-half
(1 1/2) times as well on the government course as a tire
graded 100. The relative performance of tires depends
upon the actual conditions of their use, however, and
313
Consumer information
Instruments
and controls
Instrument
cluster display
Technical
Operation
Driving
Practical hints
Car care
Index
data
Download from Www.Somanuals.com. All Manuals Search And Download.
Instruments
and controls
Instrument
cluster display
Technical
data
Operation
Driving
Practical hints
Car care
Index
Consumer information
Temperature
The temperature grades are A (the highest), B, and C,
representing the tire’s resistance to the generation of
heat and its ability to dissipate heat when tested under
controlled conditions on a specified indoor laboratory
test wheel. Sustained high temperature can cause the
material of the tire to degenerate and reduce tire life,
and excessive temperature can lead to sudden tire
failure. The grade C corresponds to a level of
performance which all passenger vehicle tires must
meet under the Federal Motor Vehicle Safety Standard
No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the
minimum required by law.
Warning!
The temperature grade for this tire is established
for a tire that is properly inflated and not
overloaded. Excessive speed, underinflation, or
excessive loading, either separately or in
combination, can cause excessive heat build up
and possible tire failure.
314
Download from Www.Somanuals.com. All Manuals Search And Download.
Cassette mode .................................................... 133
CD changer ........................................................ 137
CDmode .............................................................136
Operating and display elements ........................... 126
Operating safety ................................................. 125
Operation .......................................................... 129
Operation Audio and telephone ............................ 125
Radio mode . . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . 131
Telephone operation ............................................ 140
Audio systems .......................................................... 91
Cassette player ..................................................... 93
CD player ............................................................. 92
Radio.................................................................... 91
Automatic climate control . . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . 118
Air distribution .................................................. 122
Air recirculation.................................................. 123
Air volume ......................................................... 122
Basic setting ...................................................... 120
Defogging windows ............................................. 121
Defrosting........................................................... 121
Display and controls............................................ 120
Dust filter ........................................................... 124
Economy............................................................. 121
Index
ABS (Antilock brake system).....................................206
ABS-SYSTEM - malfunction and
warning messages ...............................................225
Adjusting headlamp aim ..........................................274
Adjusting telescoping steering column ....................... 74
Air conditioner refrigerant ......................................309
Airbag OFF indicator lamp .......................................221
Airbags.................................................................... 65
Antenna
Removal..............................................................287
Antilock brake system (ABS).....................................206
Malfunction indicator lamp ...................................219
Antitheft alarm system.............................................. 42
Aquaplaning............................................................196
Ashtray
Center console, front............................................150
Audio system
Anti-theft system ................................................127
Button and soft key operation ..............................128
315
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear window defroster ....................................... 122
Residual engine heat utilization (REST) ............. 123
Special settings...................................................121
Automatic transmission ........................................ 183
Emergen cy op eration .......................................... 191
Fluid level .........................................................247
Program mode selector switch ........................... 190
Selector lever position ....................................... 186
Transmission selector lever,
Brake assist system (BAS) ......................................204
Malfunction indicator lamp ................................219
Brake fluid .............................................................309
BRAKE FLUID - malfunction and
warning messages .............................................226
BRAKE LINING WEAR - malfunction and
warning messages .............................................226
Brake pad wear ......................................................226
Brake warning lamp................................................217
manually unlocking ...................................... 268
C
B
Cargo tie-down rings...............................................152
Catalytic converter .................................................172
BabySmart™ airbag deactivation system .................63
Self-test................................................................63
Backrest ..................................................................53
BAS (Brake assist system).......................................204
Battery ................................................................... 261
Battery recycling ...............................................262
Cellular telephone ................................................. 153
Center console......................................................... 20
Central locking switch ............................................. 36
Central locking system ............................................ 28
Choosing global or selective mode ....................... 31
Electronic main key............................................. 25
Electronic reserve key ......................................... 26
Locking and unlocking ........................................ 30
Mechanical keys .................................................. 33
BATTERY CHARGE - malfunction and
warning messages..............................................224
BRAKE ASSIST - malfunction and
warning messages..............................................225
316
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control...........................................................28
Changing wheels ..........................................................254
Check engine malfunction indicator lamp ....................216
Check regularly and before a long trip...........................213
Checking engine oil level
Coolants
Anticorrosion/antifreeze quantità
Cruise control .............................................................. 201
Cup holder
311
311
Center console, front................................................ 149
Via engine oil level indicator ....................................110
Via oil dipstick ........................................................246
Cleaning and care of the vehicle ..................................292
COMAND, radio, telephone and two-way radio .........170
Combination switch.......................................................115
Consumer information ..................................................313
Control and operation of radio transmitters .................170
D
Deep water
Driving instructions ...........................................199
DISPLAY DEFECTIVE (engine control unit) -
malfunction and warning messages .....................223
DISPLAY DEFECTIVE (several systems) -
malfunction and warning messages .....................223
Display illumination................................................. 83
Doors....................................................................... 34
Drinking and driving...............................................193
Drive sensibly - save fuel ........................................192
Driving instructions ................................................192
Brakes................................................................193
Pedals.................................................................193
Driving off..............................................................194
COOLANT (coolant level) -
malfunction and warning messages..........................228
COOLANT (coolant temperature) -
malfunction and warning messages..........................229
Coolant level
Adding ..................................................................... 248
Checking..................................................................247
Coolant temperature gauge .............................................84
317
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine oil level indicator
110
111
ENGINE OIL LEVEL NOT WHEN ENGINE ON
(measuring) - multifunction indicator
ENGINE OIL TEMP
ELEC. STABIL PROGR. - malfunction and
warning messages .............................................234
Electronic main key ................................................25
Changing batteries.............................................277
Synchronizing remote control............................279
Electronic stability program (ESP)
Malfunction indicator lamp ................................ 219
Warning lamp ..................................................... 219
Emergency tensioning retractor (ETR) .....................64
Emergency unlocking in case of accident .................38
Emission control .................................................... 173
Engine compartment..............................................244
ENGINE FAN - malfunction and
- malfunction and warning messages..................232
Engine oils .............................................................309
ESP (Electronic stability program)...........................208
Control switch....................................................209
Synchronizing....................................................209
Exterior lamp switch
Exterior lamps
112
Adjusting headlamp aim.....................................274
Low and high beam ...........................................271
Parking lamps ....................................................271
Replacing bulbs ................................................. 269
Side marker lamp, front..................................... 273
Standing lamps ................................................. 271
Taillamp assemblies........................................... 272
Turn signal lamp ............................................... 271
warning messages..............................................227
Engine oil additives ................................................309
Engine oil consumption
Engine oil level
111
Checking.....................................................110, 246
ENGINE OIL LEVEL - malfunction and
warning messages..............................................232
318
Download from Www.Somanuals.com. All Manuals Search And Download.
Front .......................................,..........................50
Rear.....................................................................51
Headlamp cleaning system ....................................... 114
Heated seats .............................................................55
Hood.................................................................................... 244
First aid kit .............................................................238
Flexible service system (FSS)....................................107
Fuel filler flap
Manual release....................................................287
Fuel requirements....................................................310
Fuels, coolants, lubricants etc. - Capacities ............... 307
Fuses, electrical ...................................................... 242
I
Illuminated vanity mirrors .......................................147
Indicator lamps in the instrument cluster...................82
Infant and child restraint systems .............................71
Instrument cluster.....................................................80
Activating display ................................................83
Indicator lamps ....................................................82
Instrument lamps .....................................................83
Instruments and controls...........................................18
Interior
G
Garage door opener ................................................. 154
Gasoline
Additives
311
Fuel requirements................................................ 310
Premium unleaded............................................... 310
Glove box
148
General notes ....................................................148
Interior lighting ......................................................146
H
117
Hazard warning flasher switch Head restraints
J
Jump starting...........................................................263
322
Download from Www.Somanuals.com. All Manuals Search And Download.
Trip and main odometer...................................... 90
Multifunction steering wheel .................................. 86
LIGHT SENSOR - malfunction and
warning messages ............................................. 231
Lighter
151
N
LIGHTING SYSTEM - malfunction and
warning messages .............................................230
Limp home mode (Automatic transmission) 191
Navigation system - Multifunction display ............... 99
0
Locking and unlocking.............................................30
Luggage cover ....................................................... 238
On-board diagnostic system ....................................216
Operator's Manual .....................................................8
Outside temperature indicator ................................ 84
Overhead control panel ........................................... 21
M
Mainten an ce ........................................................... 171
Malfunction and indicator lamps
P
in the instrument cluster ................................... 216
Malfunction and warning messages ...................... 222
Malfunction message memory................................ 102
Manual operation of soft top ..................................280
Multicontour seat.....................................................54
Multifunction display ..............................................86
Engine oil level indicator .....................................90
ESS (Flexible service system)...............................90
Setting the audio volume ................................... 106
Panic button............................................................. 33
Parcel net in front passenger footwell ................... 152
Parking.................................................................. 195
Parking brake .........................................................192
PARKING BRAKE - malfunction and
warning messages ............................................ 227
Power assistance .................................................... 193
321
Download from Www.Somanuals.com. All Manuals Search And Download.
Roller blind
Power seats, front.....................................................45
Backrest...............................................................53
Power windows ...................................................... 143
Express opening and closing ............................. 144
Opening and closing ...........................................32
Operated with soft top switch ............................ 145
Synchronizing ................................................... 144
Problems with your vehicle.......................................14
Product information ................................................... 7
Horizontal .........................................................167
Vertical...............................................................168
S
Safety guidelines for the seat belt, emergency
tensioning retractor and airbag ........................... 70
Seat belts................................................................. 57
Fastening............................................................. 59
Seat belt nonusage warning system .................... 58
Unfastening......................................................... 60
Warning lamp.....................................................220
Seat belts and supplemental
R
Rain sen sor ............................................................. 116
Rear view mirrors
restraint system (SRS) ......................................... 57
Service indicator
See flexible service system (ESS) ........................107
Setting the audio volume .......................................106
Shelf below rear window.........................................238
Snow chains............................................................198
Exterior ................................................................76
Inside...................................................................75
Replacing wiper blade insert..................................288
Reserve key .............................................................26
Roll bar
Switch.................................................................. 51
Warning lamp .................................................... 221
320
Download from Www.Somanuals.com. All Manuals Search And Download.
Soft top ..................................................................158
Emergency operation ......................................... 280
Lowering ........................................................... 160
Raising .............................................................162
Spare parts service.................................................300
Spare wheel ...................................................240, 252
SRS indicator lamp.................................................. 218
Starting and turning off the engine......................... 182
STEER. WHEEL ADJUST. - malfunction and
warning messages.............................................. 231
Steering lock .......................................................... 180
Storage compartment
Trunk floor .......................................................240
Storage compartments
Center console .................................................. 149
Glove box ........................................................... 148
Stowing things in the vehicle .................................238
Sun visors ............................................................. 147
Supplemental restraint system (SRS) .......................64
Synchronizing remote control ................................279
T
Tachometer ............................................................. 85
Technical data ........................................................303
Electrical system ................................................305
Main dimensions ...............................................306
Rims and tires ...................................................304
Weights ..............................................................305
Tele Aid ..................................................................174
Initiating an emergency call ...............................175
Telephone................................................................ 94
General notes ....................................................153
Incoming call....................................................... 98
Redialing............................................................. 96
Telephone book ................................................... 94
Telephones and two-way radios ...............................170
Telescoping steering column
Adjusting............................................................. 74
Indicator lamp ...................................................220
Telescoping steering column -
malfunction and warning messages ................... 231
319
Download from Www.Somanuals.com. All Manuals Search And Download.
The first 1 000 miles
171
W
Tire inflation pressure...........................................259
Tires
Driving instructions...........................................195
Tow-awayalarm .......................................................44
Towing the vehicle .................................................265
Transmission selector lever,
manually unlocking ..........................................268
Trip computer .......................................................100
Trip odometer ..........................................................85
Trunk.......................................................................39
Warranty coverage..................................................300
WASHER FLUID (headlamp cleaning system) -
malfunction and warning messages ...................235
What you should know at the gas station
211
Wheels....................................................................250
Where to find it ....................................................... 13
Wind screen ...........................................................165
Windshield washer/headlamp cleaning system
Refilling .............................................................249
Wiper blade
Opening
Release switch
31
41
Replacing insert .................................................288
Trunk lamp ............................................................288
V
Vehicle jack ...........................................................241
Vehicle tools ................................................................... 240
323
Download from Www.Somanuals.com. All Manuals Search And Download.
|