DC260
Visual Presenter
User Manual
[Important]
To download the latest version of Quick Start
Guide, multilingual user manual, software, or
driver, etc., please visit Lumens
Download from Www.Somanuals.com. All Manuals Search And Download.
7.19 Using a SD card ................................................................................36
Chapter 9 Troubleshooting..........................................................................47
English - 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Information
Copyrights © Lumens Digital Optics Inc. All rights reserved.
Lumens is a trademark that is currently being registered by Lumens Digital Optics
Inc.
Copying, reproducing or transmitting this file is not allowed if a license is not
provided by Lumens Digital Optics Inc. unless copying this file is for the purpose
of backup after purchasing this product.
In order to keep improving the product, Lumens Digital Optics Inc. hereby
reserves the right to make changes to product specifications without prior notice.
The information in this file is subject to change without prior notice.
To fully explain or describe how this product should be used, this manual may
refer to names of other products or companies, nevertheless without any intention
of infringement.
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any
possible technological, editorial errors or omissions, nor responsible for any
incidental or related damages arising from providing this file, using, or operating
this product.
English - 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the visual presenter:
1. Do not place visual presenter in tilted position.
2. Do not place the visual presenter on an unstable trolley, stand or table.
3. Do not use the visual presenter near water or source of heat.
4. Use attachments only as recommended.
5. Use the type of power source indicated on the visual presenter. If you are not sure of
the type of power available, consult your dealer or local electricity company for
advice
6. Place the visual presenter on a place that it can be unplugged easily.
7. Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
„ Ensure the plug is free of dust before inserting it into a socket.
„ Ensure that the plug is inserted into the socket securely.
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9. Do not place the visual presenter where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10. Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They provide ventilation
and prevent the visual presenter from overheating. Do not place the visual presenter
on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation
is provided.
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the visual presenter.
13. Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14. Unplug the visual presenter during thunderstorms or if it is not going to be used for
an extended period, do not place the visual presenter or remote control on top of
heat-emitting equipment or heated objects such as a car and etc.
English - 4
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Unplug the visual presenter from the wall outlet and refer serving to licensed
service personnel when the following situations happen:
„
„
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the visual presenter has been exposed to rain or
water.
<Note> Using an incorrect battery type in the remote control may result in
breakdown. Follow your country’s instructions on how to dispose of used
batteries.
„
Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This visual presenter has a 3-wire AC line Plug. This is a safety feature to ensure that the
plug will fit into the power outlet. Do not try to disable this safety feature.
If the visual presenter will not be used for a long period of time unplug it from the power
outlet.
CAUTION
RISK OF ELECTRIC SHOCK
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that
this equipment may
contain dangerous
voltage which could
cause electric shock.
This symbol indicates that
there are important operating
and maintenance instructions
in this User Manual with this
unit.
„ FCC Warning
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO
English - 5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATE THE EQUIPMENT.
Note: This equipment has been tested and found to comply with the limits for a Class A or B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Notice:
(1) A Unshielded-type power cord is required in order to meet FCC emission limits
and also to prevent interference to the nearby radio and television reception. It is
essential that only the supplied power cords by used.
(2) Use only shielded cables to connect I/O devices to this equipment.
(3) Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
„ EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational environment. It
is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio interference, in
which case the user may be required to take adequate measures. The typical use is in a
conference room, meeting room or auditorium.
English - 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Package Content
DC260
Quick Start Guide
User Manual
Power Cord
Base Installation
Guide
Remote Control
ꢀ
Appearance may vary with
country/region.
Software Bag
VGA Cable
USB Cable
C-Video Cable
Remote Control
Holder
Microscope Adaptor
Padded Carry Bag
(Optional)
RS232 Adaptor
(Optional)
English - 7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 Mounting the DC260 at desktop
1. Please set up the DIP Switch settings first. Refer to Chapter 5 “DIP
Switch Settings” in the DC260 user manual.
2. Please refer to the Base Installation Guide for installation instructions
for all parts.
4.3 Connecting devices
4.3.1 Step 1: Plugging in the power outlet
AC Outlet
<Note> Appearance of power cord may vary with countries/regions.
4.3.2 Step 2: Connecting with components
¾ Connecting to a projector or monitor
z
Use VGA cable to connect VGA OUT connector on DC260 to a
projector or the VGA IN connector on a monitor.
¾ Connecting to a TV
1.Use C-Video cable to connect TV.
English - 12
Download from Www.Somanuals.com. All Manuals Search And Download.
2.Adjust DIP Switch Setting
„ NTSC: America, Taiwan, Panama, Philippine, Canada, Chile, Japan, Korea and
Mexico
„ PAL: Country/region not listed above:
<Note> You are unable to use the [Menu] / [Rotate] / [Half Page] /
[Source] / [Record] / [Capture] / [Delete] / [PBP] / [Slide Show]
functions in C-Video mode.
<Note> VGA output is not supported once C-Video output enabled.
3.Restart the DC260
DIP Switch setting will not be available until restarting the DC260.
English - 13
Download from Www.Somanuals.com. All Manuals Search And Download.
¾ Connecting to a LCD TV/ PDP
z Using the HDMI cable to connect a LCD TV/ PDP
¾ Connecting to a computer
z Use VGA cable to connect VGA IN connector on DC260 to the VGA
OUT connector on the computer
z Connecting to a computer through USB
Connect to USB port. Then install the supplied Ladibug™ program. Please
refer to DC260 User Manual 4.6 Installing application software.
z Connecting to a computer through RS232 (RS232 Adapter is optional)
English - 14
Download from Www.Somanuals.com. All Manuals Search And Download.
¾ Connecting to speaker
Speaker
<Remark>: Or connect to an additional amplifier before connecting
to the speaker
¾ Connecting to microphone
Microphone
English - 15
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Start using the DC260
Control Panel
Remote Control
z When using the remote control, aim at the receptor on the DC260,
and press the power button.
z Once DC260 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
<Note> Once the password page is shown , please key in the
password. If you forget it, please contact your distributor or the
service center.
4.5 Installing remote control holder
Insert the holder over the gooseneck of the camera and push it down.
English - 16
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6 Installing application software
After installing the USB driver and application software, you can use the
following functions:
¾ Control the DC260.
¾ Capture and record images.
¾ Annotate the image, highlight important details and save it.
¾ Support the full screen function.
<Note>: Please refer to Ladibug™ software user manual for installation
steps and software operation.
English - 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 DIP Switch Settings
<Note> You have to reset the unit for setting to take affect.
5.1 Connecting to a projector or monitor
5.1.1 XGA 60Hz output (default values):
5.1.2 SXGA 60 Hz output
5.1.3 HDTV 720P 50Hz output
5.1.4 HDTV 720P 60Hz output
English - 18
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Connecting to a TV
5.2.1 NTSC: America, Taiwan, Panama, Philippines, Canada,
Chile, Japan, Korea and Mexico
5.2.2 PAL: Countries/regions not listed above.
<Remark> VGA output is not supported once C-Video output has
been enabled.
English - 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 Control Panel/Remote Control
and Setting Menu
6.1 Functions of control panel and remote control
<Note> You are unable to use the [Menu] / [Rotate] / [Half Page] / [Source] /
[Record] / [Capture] / [Delete] / [PBP] / [Slide Show] functions in C-Video
mode.
<Remark> The below functions are listed alphabetically.
Name
Function
Operation
Remote control /
Control panel
Turn on and off the visual presenter.
ghij
Move up, down, left or right to select the needed
function.
Remote control /
Control panel
AF
Automatically adjust focal length on an object.
Remote control /
Camera Head
Remote control /
Control panel
Auto Tune
Automatically adjust the image to have the best
brightness and focusing performance.
Manually adjust the brightness of the image.
Capture the image to the SD card (priority) or
internal memory.
BRT+/-
Remote control
Remote control /
Control panel
Capture
Delete
Delete the image stored in the SD card (priority)
or internal memory.
Remote control /
Control panel
Enter
Enter/Activate functions.
Remote control /
Control panel
Focus +/-
Freeze
Manually adjust focal length on an object.
Remote control /
Control panel
Freeze the current image to temporarily stay on
the screen. Press again to defreeze.
Remote control /
Control panel
Half Page
Turn on/turn off the Half Page function. Pressing
[Half Page] once will display the upper half of the
live image, while pressing [Half Page] twice will
show the lower half of the live image. Press [Half
Page] again to exit this function.
Remote control /
Control panel
English - 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp
Turn on / off the lamp.
Remote control /
Control panel
M Scope
Menu
Enter the microscope mode. Press again to
return to the previous mode.
Remote control
Activate the setting menu function/exit menu.
Remote control /
Control panel
Mode
PBP
Select general/slide/negative/microscope mode.
PBP (Picture by picture): Compare live images
with captured image files.
Remote control
Remote control
Photo/ Text Select photo, text or grayscale image mode.
Refer to DC260 User Manual Chapter 7
Descriptions of major functions 7.2 I would
like to make text clearer and photos more
colorful
Remote control
Record
Record motion images. Press [Record] to record
images to SD card (priority) or internal memory;
press[Record]again to stop recording.
Remote control /
Control panel
Rotate
Rotate the image by 0°/90°/180°/270°.
Remote control /
Control panel
Slide Show Show the photos or videos stored in the SD card
Remote control
(priority) or internal memory in slide mode.
Source
Switch between different sources of signals:
1. Live images (default)
Remote control /
Control panel
2. SD card (priority) or internal memory
3. Computer
Zoom +/-
Increase or decrease the image size.
Remote control /
Control panel
English - 21
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Setting Menu
<Remark> Press [Menu] on the remote control or control panel to enter the
setting menu; The bold underlined values in the following table are the
defaults.
1st Level
Major
3rd Level
Adjustment
values
2nd Level
Minor Items
Descriptions
Items
Use the left and right arrow
keys to adjust the brightness.
Brightness
Mode
0~Max
Use the left and right arrow
keys to select the image
mode.
Normal/Slide/
Film/Microscope
Use the left and right arrow
keys to select the image
mode.
Refer to DC260 User Manual
Chapter 7 Descriptions of
major functions 7.2 I would
like to make text clearer and
photos more colorful
Photo/Text
Photo/Text/Gray
Display
Press [Enter] to immediately
activate photo comparison
mode. Refer to DC260 User
Manual Chapter 7
PBP
Enter
Descriptions of major
functions 7.15 I would like
to compare images
Use the left and right arrow
keys to select. The night
vision mode suits with darker
environment.
Night Vision
Digital Zoom
On/Off
Use the left and right arrow
keys to turn digital zoom
on/off.
On/Off
English - 22
Download from Www.Somanuals.com. All Manuals Search And Download.
Press [Enter] to play the
photos or videos stored in the
SD card (priority) or internal
memory. Refer to DC260
User Manual Chapter 7
Descriptions of major
functions 7.14 I would like
to play the slides
Storage
Slide Show
Enter
1. Off
2. Shutter
3. Right
4. Down
5. Side
Use the left and right arrow
keys to select the image
switch mode.
Slide Show
Effect
6. Open
1. 1 Sec
2. 3 Sec
3. 5 Sec
4. 10 Sec
5. Manual
Use the left and right arrow
keys to select the delay time.
Delay
Select manual mode to switch
images manually.
Press [Enter] to immediately
copy the data in visual
Copy To SD
Enter
presenter to the SD card.
Use the left and right arrow
keys to select, and then press
[Enter] to confirm the deletion
of photos.
Delete All
Format
Yes/No
Delete the image stored in the
SD card (priority) or internal
memory.
Use the left and right arrow
keys to select, and then press
[Enter] to format the data
stored in the SD card (priority)
or internal memory.
Yes/No
English - 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the left and right arrow
keys to select the image
quality for the captured
1. High
Image Quality 2. Medium
3. Low
images and recorded videos.
Use the left and right arrow
keys to select the video
capture mode.
1. Single
Setting
2. Continuous
3. Disable
Capture
(Single/Continuous/Disable)
1. 1 hr
Use the left and right arrow
keys to set the capture time.
<Remark> It only works when
the capture mode is set to
[continuous].
2. 2 hr
3. 4 hr
Capture Time
4. 8 hr
5. 24 hr
1. 5 sec
2. 10 sec
3. 30 sec
4. 1 min
5. 2 min
6. 5 min
Use the left and right arrow
keys to set the capture
Capture
Interval
interval. <Remark> It only
works when the capture mode
is set to [continuous]
Use the left and right arrow
keys to select the USB
transfer mode.
1.Camera: connecting the
DC260 to view live image;
2.Storage device: connecting
to the SD card (priority) or
internal memory.
1. Camera
USB Transfer
2. Storage
device
Refer to DC260 User Manual
Chapter 7 Descriptions of
major functions 7.20
Computer-related functions
English - 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Regardless of outside
environment, the machine will
adjust the brightness to the
optimal condition.
AE
On/Off
Use the left and right arrow
keys to select.
Regardless of outside light or
color, the machine will adjust
the color to the optimal
condition. Press [Enter] to
activate.
AWB
Enter
Use the left and right arrow
keys to turn digital zoom
on/off.
Digital Zoom
On/Off
Use the left and right arrow
keys to turn on/off the noise
reduction function. Refer to
DC260 User Manual Chapter
7 Descriptions of major
functions 7.17 I would like
to reduce the image noise
Noise
Reduction
On/Off
Use the left and right arrow
keys to adjust the volume.
Volume
0~Max
English - 25
Download from Www.Somanuals.com. All Manuals Search And Download.
1. English
2. 繁体中文
3. Deutsch
4. Français
5. Italiano
6. Español
7. Русский
8. Nederlands
9. Suomi
English
Traditional Chinese
German
French
Italian
Spanish
Russian
Dutch
Advance
Language
Finnish
10. Polski
Polish
Use the left and right arrow
keys in the language option to
select the preferred language.
Using UXGA - set the DIP
switch for XGA, select UXGA
for OSD
1. XGA
2. SXGA
3. UXGA
4. 720P
5. 1080P
Using 1080P - set the DIP
switch as 720P, select 1080p
for OSD
Output Mode
Based on different DIP switch
settings, different output
modes are provided. Refer to
Chapter 5 DIP “Switch
Settings” in the DC260 user
manual.
Use the left and right arrow
keys to turn the lock down
function on and off. You can
set the password when [On]is
selected. Refer to DC260
User Manual Chapter 7
Descriptions of major
functions 7.18 I would like
to set / change the
Lock Down
On/Off
password
English - 26
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the left and right arrow
keys to turn the auto erase
function on and off. When
[On] is selected, the saved
images will automatically be
deleted when the system is
turned off.
Auto Erase
On/Off
Refer to DC260 User Manual
Chapter 7 Descriptions of
major functions 7.11 I would
like to automatically delete
the captured images
whenever it is turned off
Read the value of the current
image mode.
Preset Load
Preset Save
Yes/No
Use the left and right arrow
keys to select, and then press
[Enter] to confirm.
Save the value of the current
image mode.
Yes/No
Use the left and right arrow
keys to select, and then press
[Enter] to confirm.
Use the left and right arrow
keys to select, and then
immediately press [Enter] to
activate the factory reset.
Factory Reset Yes/No
Refer to DC260 User Manual
Chapter 7 Descriptions of
major functions 7.16 I
would like to resume the
factory default setting
English - 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 Descriptions of major functions
7.1 I would like to switch image sources
Live image is the default of image source. Press [Source] on the remote
control or control panel to change:
1. Live images (default)
2. SD card (priority) or internal memory
3. Computer.
7.2 I would like to make text clearer and photos more
colorful
Photo is the default. You can change setting via the remote control or
control panel.
Remote control:
1. You can rotate between photo, text, and gray:
z [Photo] (default): for viewing photos or text with photos and will make
the photos more colorful.
z [Text]: for viewing text files and will make the text clearer.
z [Gray]: for viewing black and white photos and will make the
grayscale differentiation more distinct.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [f] or [e] to select [Display].
3. Press [d] to select [Photo/Text].
4. Press [f] or [e] to select [Photo/Text/Gray] (Refer to the description
above).
5. Press [MENU] to exit.
7.3 I would like to zoom in /out of images
1. Press [Zoom +] on the remote control or control panel to zoom in.
2. Press [Zoom -] on the remote control or control panel to zoom out.
English - 28
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 I would like to use the auto focus
1. Press [AF] on the remote control.
2. Press the AF button on the camera head of main unit.
7.5 I would like to adjust the brightness
Remote control:
1. Press [BRT +] to make it brighter.
2. Press [BRT -] to make it darker.
Control panel:
1. Press [MENU] to enter the setting menu.
2. Press [f] or [e] to select [Display].
3. Press [d] to select [Brightness].
4. Press [f] or [e] to adjust the value.
7.6 I would like to turn on/ off the lamp
1. The default of lamp is turn on. Press [Lamp] on the remote control or
control panel to turn off.
7.7 I would like to automatically adjust the image to have
best brightness and focusing performance
1. Press [Auto Tune] on the remote control or control panel.
7.8 I would like to capture images
7.8.1 Setting the quality of captured images
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to the [Storage] menu.
3. Press [d] to find [Image Quality].
4. Press [f] or [e] to select among [High/Medium/Low].
5. Press [Menu] to exit.
English - 29
Download from Www.Somanuals.com. All Manuals Search And Download.
7.8.2 Setting continuous capture
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to the [Setting] menu.
3. Press [d] to find [Capture].
4. Press [f] or [e] to select [continuous].
5. Press [d] to find [Capture Time]; Press [f] or [e] to select time
settings.
6. Press [d] to find [Capture Interval]; Press [f] or [e] to select time
settings.
7. Press [Menu] to exit.
7.8.3 Capturing and saving images
1. Press [Capture] on the remote control or control panel.
7.9 I would like to view captured images
1. Press [Source] on the remote control or control panel to display
thumbnails of all captured images.
2. Press [c] or [d] or [f] or [e] to select the thumbnail you want you view.
3. Press [Enter] for the full-screen display of the image.
4. Press [f] or [e] to turn to the previous/next image.
5. Press [Source] to exit.
7.10 I would like to delete captured images
1. Press [Source] on the remote control or control panel.
2. Press [c] or [d] or [f] or [e] to select the thumbnail you want you
delete.
3. Pressing [Del] will open a [Delete File] window.
4. Press [f] or [e] to select [Yes] (The default value is No).
5. Press [Enter] to delete the selected photo.
6. Press [Source] to exit.
English - 30
Download from Www.Somanuals.com. All Manuals Search And Download.
7.11 I would like to automatically delete the captured
images whenever it is turned off (Auto Erase)
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [f] or [e] to access the [Advance] menu.
3. Press [c] or [d] to [Auto Erase].
4. Press [f] to select [On].
5. Press [f] or [e] to select [OK].
6. Press [Menu] to exit.
7. It will automatically delete all captured photos when it is turned off.
7.12 I would like to record and play videos
7.12.1 Setting the image quality
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [f] or [e] to the [Storage] menu.
3. Press [d] to find [Image Quality].
4. Press [f] or [e] to select among [High/Medium/Low].
5. Press [Menu] to exit.
7.12.2 Recording videos
1. Press [Record] on the remote control or control panel to start
recording videos.
2. Simultaneously record sounds with the built-in microphone of the
control panel or the microphone connected to the MIC port.
3. Press [Record] again to stop recording.
[Note] The MIC port cannot be connected to an amplifier before
connecting to the microphone.
7.12.3 Playing videos
1. Press [Source] on the remote control or control panel to display
thumbnails of all video recorded.
2. Press [c] or [d] or [f] or [e] to select the thumbnail you want you
view.
3. Press [Enter] for full-screen play
English - 31
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press [f] or [e] to turn to the previous/next video.
5. Press [Source] to exit.
[Note] Only the MOV files recorded can be played and live sound
output is not available; additional amplifier can be connected to
the PHONE port.
7.13 I would like to switch the view between the upper and
lower half of the image (Half Page)
1. Press [Half Page] on the remote control or control panel and the
upper half of the live image will be displayed.
2. When you press [Half Page] again, the lower half of the live image will
be displayed.
3. Press [Half Page] again to exit this function and return to the live image.
<Notes> This function is not available under Microscope Mode. The
Zoom in / out function is not available when this function is activated.
7.14 I would like to play the slides (Slide Show)
7.14.1 Setting the slide show effect
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [d] to find the [Slide Show Effect].
4. Press [f] or [e] to select image switch mode between [Off /
Shutter / Right / Down / Side / Open].
5. Press [Menu] to exit.
7.14.2 Setting delay time
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [d] to find the [Delay].
4. Press [f] or [e] to select image switch mode between [1 Sec / 3
Sec / 5 Sec / 10 Sec / Manual].
5. Press [Menu] to exit.
English - 32
Download from Www.Somanuals.com. All Manuals Search And Download.
7.14.3 Activating/Stopping the slide show
<Notes>Images over 8 MB, cannot be played. Whilst playing, the
[Rotate] function can be activated to rotate the images.
Remote control:
1. Press [Slide Show] to start playing.
2. Press [Slide Show] again to stop playing.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [d] to find [Slide Show]
4. Press [Enter] to play.
5. To stop playing, repeat steps 1 to 4.
7.15 I would like to compare images (Compare live images
with captured images) (PBP, Picture by Picture)
This function will compare and contrast a live image with a captured image.
C1
C3
C2
C4
C5
C6
C7
Captured Image Live Image
Remote control:
1. Press [PBP] to enter the PBP (Picture by Picture) photo selection
screen.
2. Press [c] or [d] or [f] or [e] to select the files to be compared.
3. Press [Enter] to activate the image comparison.
4. Press [f] or [e] to move the images (captured images only)
leftward/rightward.
5. Press [PBP] to exit.
English - 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [f] or [e] to access the [Display] menu.
3. Press [d]to find[PBP]
4. Press [Enter] to enter the PBP (Picture by Picture) photo selection
screen.
5. Press [c] or [d] or [f] or [e] to select the files to be compared.
6. Press [Enter] to activate the image comparison.
7. Press [f] or [e] to move the images (captured images only)
leftward/rightward.
8. Press [Menu] again to return to image thumbnails.
9. Press [Source] to exit.
7.16 I would like to resume the factory default setting
(Factory Reset)
1. Press[Menu]on the remote control or control panel to enter the
setting menu
2. Press [f] or [e] to access the [Advance] menu.
3. Press [d] to select [Factory Reset].
4. Press [f] or [e] to select [Yes].
5. Press [Enter] to activate.
7.17 I would like to reduce the image noise (Noise
Reduction)
This function enables visual presenter to automatically clear image noise.
The noise is especially obvious when Visual presenter is connected to a
DLP projector. You can use this function to improve the image quality.
English - 34
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press [Menu] on the remote control or control panel to enter the
setting menu.
2. Press [f] or [e] to the [Setting].
3. Press [d] to find [Noise Reduction].
4. Press [f] or [e] to select [On].
7.18 I would like to set / change the password (Lock Down)
7.18.1 Setting the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [f] or [e] to the [Advance] menu.
3. Press [d] to [Lock Down].
4. Press [f] or [e] to select [On].
5. The screen will be displayed, as shown below.
Key in Password
＊＊
6. Key in the password
Press the keys on the control panel. All keys can be used as part of
the password except the [Power] and [Enter] keys. The maximum
number of characters is 2. For example, you can press [Source] +
[Menu] as the password.
<Remark>The screen will show * while you enter the password.
Ensure that you remember the order in which the keys are
entered.
7. After completing the password, press [Enter].
8. The confirmation screen will be displayed, as shown below. Enter the
password again.
Confirm password
9. After you enter the password, press [Enter].
If the password is entered correctly, setup is completed. If the
password is incorrect, an error message is displayed and please
follows the screen instructions.
English - 35
Download from Www.Somanuals.com. All Manuals Search And Download.
7.18.2 Changing the password
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [f] or [e] to the [Advance] menu.
3. Press [d] to [Lock Down]
4. Press [f] or [e] to select [Off] and deactivate the password
setting function.
5. Press [f] or [e] to select [On] and reactivate the password
setting function. Refer to Steps 5-8 in DC260 User Manual
Chapter 7 Descriptions of major functions 7.18.1 Setting
the password for operational steps.
7.19 Using a SD card
7.19.1 Deactivate the write protect function (SD Lock)
If the write protect function of the SD card is activated, you will not be able
to use the Capture function, although you can still read the files in it.
Adjust the Lock of the SD card to deactivate the write protect function.
7.19.2 Inserting a SD card
7.19.2.1 The screen will display [Copy to SD card] and ask if you
would like to copy the files saved in the DC260 to a SD card.
¾ Press [f] or [e] on the control panel to select.
Copy to SD Card
YES
NO
7.19.2.2 The screen will display as follow, once you insert an
unformatted SD card.
¾ Press [f] or [e] on the control panel to select.
Format SD Card
YES
NO
English - 36
Download from Www.Somanuals.com. All Manuals Search And Download.
<Note> The data previously saved on the SD card will be
erased when it is formatting.
7.19.3 Ejecting a SD card
<Note> Turn the power off before ejecting the SD card to
avoid damaging the SD card.
7.20 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed
before using the computer-related functions. Refer to DC260 User Manual
Chapter 4 Installation and Connections 4.3 Connecting Devices and
4.6 Installing application software.
7.20.1 I would like to insert a photo in MS-Paint
1. Click File> From Scanner or Camera in MS-Paint shown as the
bottom left figure.
2. Click [Get Picture] will capture the photos of live images and insert
the files in use shown as top right figure.
English - 37
Download from Www.Somanuals.com. All Manuals Search And Download.
7.20.2 I would like to insert a photo in MS-Word
1. Click Insert > Image > From Scanner or Camera in MS-Word.
2. Select [Visual Presenter V2] and click [Custom Insert].
3. Click [Get Picture]. It will capture the photo of live image.
English - 38
Download from Www.Somanuals.com. All Manuals Search And Download.
7.20.3 I would like to change the setting of DC260 then capture a
photo in MS-Word
1. Click Insert > Image > From Scanner or Camera in MS-Word.
2. Select [Visual Presenter V2 TWAIN] and click [Custom Insert].
3. A window showing a live image (see below) will be displayed.
English - 39
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press [Setting] to control the DC260 via the Camera Settings
interface. The operating procedure is the same with the remote
control and control panel of the DC260. Refer to DC260 User
Manual Chapter 6 Control Panel / Remote Control and Setting
Menu.
5. Press [Setting] to capture images in MS-Word.
6. Press [Cancel] to exit.
7.20.4 I would like to set the DC260 as a webcam for Skype
The DC260 can be used as a webcam for teleconferencing software
such as Skype and MSN. The following instructions use Skype as an
example.
1. Open Skype and enter Tools > Options….
2. Select [Video Settings] > [webcam] > [Visual Presenter V2] and check
Start my video automatically when I am in a call, as shown below.
o
p
n
English - 40
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Start calling your contact. When both sides are connected, Skype will
display the video screen.
7.20.5 I would like to set the DC260 as a PC Camera
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [f] or [e] to the [Setting] menu.
3. Press [d] to find [USB Transfer].
4. Press [f] or [e] to select [Camera].
5. A window will be displayed, showing the [Visual Presenter V2], as
shown below
6. Click the [Visual Presenter V2].
English - 41
Download from Www.Somanuals.com. All Manuals Search And Download.
7.20.6 I would like to set the DC260 as a Removable Disc
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [f] or [e] to the [Setting] menu.
3. Press [d] to find [USB Transfer].
4. Press [f] or [e] to select [Storage device].
5. Press [Menu] to exit.
6. A Removable Disc will be displayed.
<Remark> The Removable Disc will select SD card if a SD card has
been inserted, but if a SD card has not been inserted, the Removable
Disc is internal memory.
<Note> Doing this will disable the Capture function. Suggest you
return it to [Camera] mode after using this function. Please follow
the steps below.
1. Press [Menu] on the control panel to enter the setting menu.
2. Press [f] or [e] to the [Setting] menu.
3. Press [d] to find [USB Transfer].
4. Press [f] or [e] to select [Camera].
5. Press [Menu] to exit.
English - 42
Download from Www.Somanuals.com. All Manuals Search And Download.
7.20.7 I would like to connect Interactive Whiteboard
1.System diagram
USB Cable
USB Cable
PC
Interactive Whiteboard
Visual Presenter
2. Using StarBoard
2.1 Install LuLulizer and execute “LuLulizer.exe”
<Note> Please download LuLulizer from the website
(www.lumens.com.tw/goto.htm)
2.2 Press [StarBoard] / [LULU]
English - 43
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Display the live image.
2.4 Press [StarBoard] / [Mode] / [TWAIN]
Please refer to the operations of 7.20.2 I would like to insert a
photo in MS-Word and 7.20.3 I would like to change the
setting of DC260 then capture a photo in MS-Word
3. Using SmartBoard
3.1 Press [Insert] / [Picture From Scanner]
3.2 Please refer to the operations of 7.20.2 I would like to insert a
photo in MS-Word and 7.20.3 I would like to change the
setting of DC260 then capture a photo in MS-Word
English - 44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8 Connecting to Microscope
1. Mount the microscope adaptor onto the microscope.
2. The lens of DC260 connects with the microscope adaptor.
3. Select the[Microscope]Mode
3.1.Press [M Scope]on the remote control (suggestion).
3.2.Control panel
3.2.1. Press [MENU] to enter the setting menu.
3.2.2. Press [f] or [e] to select [Display].
3.2.3. Press [d] to select [Mode].
3.2.4. Press [f] or [e] to select [Microscope].
4. If the image is not clear.
4.1.Please adjust the focus of microscope.
4.2.Press the AF button on the camera head of main unit to activate the
auto focus.
5. Digital Zoom
5.1.Press [MENU] to enter the setting menu.
5.2.Press [f] or [e] to select [Display].
5.3.Press [d] to select [Digital Zoom].
5.4.Press [f] or [e] to select [On].
5.5.Press [Zoom +]/[Zoom -] on the remote control and control panel
<Note> In microscope mode all functions are available except for the
[Zoom +] / [Zoom -] / [Half Page] functions on the remote control and
control panel. Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the control panel to enter the setting menu.
English - 45
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press [f] or [e] to select [Display].
3. Press [d] to select [Mode].
4. Press [f] or [e] to select [Normal].
English - 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9 Troubleshooting
This chapter describes problems you may encounter while using DC260. If you
have questions, please refer to related chapters and follow all the suggested
solutions. If the problem still occurred, please contact our distributors or service
center.
No.
1
Issues
Boot without
power
Solutions
Make sure you have plugged in the power cord.
2
No image output
from the DC260
1. Check the power.
2. Check the connection, Refer to DC260 User
Manual Chapter 4 Installation and
Connections 4.3 Connecting Devices
3. Check the [Source], refer to DC260 User Manual
Chapter 7 Descriptions of major functions 7.1
I would like to switch image sources
4. Check the settings for the source of the
projector. For the appropriate input selection of
the projector, refer to the projectors user manual
5. Check if DIP Switch is properly set. Refer to
DC260 User Manual Chapter 5 DIP Switch
Settings for related settings.
3
Unable to focus
Probably the document is too close. Press [zoom -]
on the remote control or control panel. Or pull
away the distance between document and lens, then
press [AF].
4
5
6
The image is
incomplete
Check the Auto Image setting of your
projector. Please refer to the user manual of the
projector.
Forget the
password for
turning on
Visual Presenter
V2, Ladibug™ or
other application
cannot be
Please contact your distributor or the service center.
Visual Presenter V2, Ladibug™ and other
applications cannot be executed simultaneously.
Only one application can be executed at a
time. Please close the currently running applications
and then execute the application to be used.
executed
simultaneously.
English - 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
