USER GUIDE
Network Storage Link
for USB 2.0 Disk Drives
Model: NSLU2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Home Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
User Password Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Administration Tab > System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Administration Tab > Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Administration Tab > Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Administration Tab > Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Administration Tab > Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Administration > Shares . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Administration > Backup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Administration > Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Administration > Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Administration > Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
User Guide Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Linksys Web Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
TCP/IP Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Storing Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Software in Linksys Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Network Storage Link for USB 2.0 Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
ii
Table of Contents
Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Network Storage Link for USB 2.0 Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Product Overview
Chapter 1
DISK 2 (Green) This LED lights up when a flash
disk or USB hard drive is connected. The LED
flashes quickly to indicate that data is being
transferred over your network.
Chapter 1:
Product Overview
Thank you for choosing the Network Storage Link for USB
2.0DiskDrives.Thisstand-aloneNetworkAttachedStorage
device features two USB ports. One port can be used for
a USB Flash Drive, and the other can be connected to any
USB hard drive.
DISK 1 (Green) This LED lights up when a USB
hard drive is connected. This LED flashes to
indicate network activity.
Power Switch This is a “soft switch”. If the
Network Storage Link is powered off, you can
start it up by briefly pressing the power switch.
To power down the Network Storage Link, press
the power switch, and wait for the Network
Storage Link to shut down and the LEDs to turn
off.
Front Panel
Back Panel
Ready/Status (Green/Amber) This LED flashes
or
when you turn on the Network Storage Link to
indicate that a self-test is in progress, and is
lit solid green when the test is completed. An
amber LED indicates an error with the device.
(See “Appendix A: Troubleshooting” for more
information.)
Ethernet This LAN (Local Area Network) port
connects to Ethernet network devices, such as
a switch or router.
Ethernet (Green) This LED is lit continuously
when the Network Storage Link is connected
to a device through the Ethernet port. The LED
flashes to indicate network activity.
Network Storage Link for USB 2.0 Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Product Overview
Chapter 1
DISK2 The Disk 2 port supports EXT3 and
FAT32 file systems. Insert your USB flash drive
(USB key) or USB disk here.
DISK1 The Disk 1 port of the Network Storage
Link supports EXT3, FAT32, and NTFS file
systems. Connect your USB hard drive here.
(Flash drives will not be recognized.)
Reset The Reset button has two functions:
•
If the Network Storage Link’s IP Address
is lost, press and hold this button for
two seconds. The IP Address will be set
to the default value of 192.168.1.77,
and the Network Storage Link will beep
once to indicate the reset has occurred.
•
If the Network Storage Link’s password
is lost, press and hold this button for 10
seconds. The password will then be set
to the default value of admin, and the
Network Storage Link will beep again.
NOTE: Resetting the Network Storage
Link will erase all of your settings and
replace them with the factory defaults.
Do not reset the Network Storage Link
if you want to retain the settings.
Power The Power port is where you will
connect the power adapter.
Network Storage Link for USB 2.0 Disk Drives
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash Disk Utility
Chapter 2
3. From this screen, select a Program Folder where you
can access the utility. The utility will automatically be
installed into the selected folder.
Chapter 2:
Flash Disk Utility
Overview
Before you can use a flash disk with the Storage Link, you
will need to install this utility to install the Storage Link’s
Utility into the System Tray of your Windows operating
system.
Installation
1. The Welcome screen will appear. If you need to close
your Windows programs, click Cancel. To continue
with the installation, click Next.
Program Folder
Welcome
2. The installation folder will be displayed in next screen.
If you want the utility to be installed in the destination
shown, click Next. If you want to choose a different
folder, click Browse and search for the location. When
the location is selected, click Next. To return to the
previous screen, click Back.
Destination Location
Network Storage Link for USB 2.0 Disk Drives
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
long. Enter this new password again in the Confirm new
password field and click Save to save this new password.
Chapter 3:
Configuration
For advanced users, a web-based utility has been
programmed into the Storage Link. This chapter
will explain all of the functions in this web utility. All
administrative tasks are performed through this web
utility. The web utility can be accessed by any PC on the
browser Address window.
User Password Tab
Internet Explorer Address Bar
Click Save to save any changes, Cancel to clear all changes,
or Help to get more information about anything on this
screen.
After you press Enter, the Web Management Home Page
will appear.
NOTE: The Storage Link is designed to function
properly after using the Setup Wizard. This
chapter is provided solely for those who wish
to perform more advanced configuration or
monitoring.
Administration Tab > System
Home Tab
Click the disk’s links to access their contents. If you click
the link to User Login (Private Data), you will be required
to enter your User Name and Password. Clicking the Disk
(Public Data) or Flash (Public Data) options allows you
to view the contents of either the USB hard disks or flash
drives that are attached to the Storage Link.
Home Tab
User Password Tab
Administration > System
From the Administration > System screen, you will be
able to change some of the Storage Link’s general and IP
settings. These settings, broken up into four categories,
are described below.
Password Change
From the User Password tab, any user can change their
Storage Link password. Simply enter your user name in the
User Name field. This should be the same as your network
logon. Then, enter your Storage Link password. Next,
enter your new password in the New Password field. This
new password can be up to 15 hexadecimal characters
Network Storage Link for USB 2.0 Disk Drives
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
Port Number This port number is used for HTTP (Web
browser) connections to this server. The default is 80,
as used by web servers. If this is changed, you should
use a number greater than 1024 (8080 is often used).
Also, if the port is not 80, you must specify the port in
your Web browser, in order to connect. To do this, add
a “:” and the port number after the address, such as
Storage Link IP Address is 192.168.1.77, and the port
number is 8080.)
Identification
Server Name In this field, you can enter a new server
name for the Storage Link. Punctuation and other special
characters (e.g. * / | \ ) cannot be used in the name.
Comment This field can be used to enter a comment,
such as the Storage Link’s location.
WorkGroup This should match your networked PC’s
“Workgroup Name”. If the workgroup name does not
match, access to the Storage Link is still possible, but
the Storage Link will not appear when you click Browse
Network (for example, when adding a network printer).
When these changes are made, click Save to save these
changes, or Cancel to clear all changes. To reset the
Storage Link’s default settings, click Restore Default
Config. To get more information about anything on this
screen, click Help.
Location
Language Support Select the appropriate language for
users on your network. If multiple languages are used,
select the most common.
Administration Tab > Users
Time Zone Select your local time zone.
Local Date Enter today’s date. The Storage Link will set its
own calendar according to the date you provide.
Local Time Enter the present time. The Storage Link
will set its own clock according to the time you provide.
Remember that this is not sent to the Server until you click
Save.
WINS
Enable WINS If your network has a WINS Server, check
this to register the Storage Link with the WINS Server. This
will allow network users to locate this device through a
Router. (Without WINS, “Network Neighborhood” or “My
Network Places”it only scans the local network segment.)
WINS Server When enabling WINS, enter your WINS
Server’s IP Address in this field. Normally, this will be a
Windows Server.
Administration > Users
Location
The Administration > Users screen allows you to manage
all Storage Link users. Users can be members of any user
group.
Enable Guest Logins If enabled, you can enter guest as
the user ID to log in to the Storage Link.
Convert failed logins to “guest” logins (Windows
networks) If enabled, all Windows users will be able
to access the Storage Link with “guest” access rights. By
default, the “guest” user has Read/Write permission to the
public data on each disk.
Existing Users
The user list shows all existing users. The details of the
selected user are displayed under Properties, at the lower
half of this screen. Select a user, then select from the
following options:
Enable UPnP Support If enabled, the Storage Link will
broadcast it’s availability to network users with systems
that support UPnP (e.g. Windows ME, Windows XP) and an
icon for the Storage Link will be automatically generated.
•
Click Groups to open the User Membership screen,
which allows you to view and/or modify the Group
that the selected user is in.
•
Click Delete to delete the selected user. When deleting
a user, you have the option of deleting the Group and
Share with the same name as the user (if they exist).
Network Storage Link for USB 2.0 Disk Drives
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
Other Groups This shows all other Groups of which the
user is not a member.
Properties
This area of the screen allows you to change the properties
for the user selected in the list above.
To Add Membership to a Group
Name The user’s name must be composed of
alphanumeric symbols not exceeding 15 characters in
length.
Select the Group or Groups in the right-hand column, and
then click << . Multiple Groups can be selected by holding
down the CTRL key while selecting.
Comment Any comment about the user must be
composed of alphanumeric symbols not exceeding 15
characters in length.
To Revoke Membership to a Group
Select the Group or Groups in the left-hand column, and
then click >>. Multiple Groups can be selected by holding
down the CTRL key while selecting.
Password The password must be composed of
alphanumeric symbols not exceeding 15 characters in
length.
Click Close when finished. Click Help for more
information.
Verify Password Re-enter the password here.
Clicking the box next to Create Private Folder (Share)
provides this user with a private folder on the drive.
Clicking the box beside Enable Disk Quota allows you
to set a limit on how much storage space that user has
in terms of megabytes of data. Enter the amount in the
space provided.
Administration Tab > Status
When you’re finished, click Save to save your changes. If
you wish to establish this user as new, click Save as New
User. You can also clear the date by clicking Clear Form.
For more information about this screen, click Help.
User Membership
This screen allows you to check which Groups this user is a
member of, and to add or revoke membership. Select the
user in the left-hand list for granting access to the group
in the right-hand list. Click the right-pointing arrows and
then the items will appear in the right-hand list.
Administration > Status
The Status screen allows you to check the Storage Link’s
details and status.
System
Server Name The Server’s current name. This name will
be shown in “Network Neighborhood” or “My Network
Places”.
IP Address This displays the Storage Link’s current IP
Address.
Current Status Indicates the Storage Link’s current status.
This will usually state“Ready”. If the Server is not available,
the message will say why the Server is not available (e.g.,
Scandisk in Progress.)
User Membership
User Name This shows the name of the User being
modified.
•
Click Shutdown Now to immediately shut down the
Storage Link. This will break all existing connections.
None of your data will be saved.
Member of This shows the Groups that this user is in.
Network Storage Link for USB 2.0 Disk Drives
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
•
•
Click Restart Now to restart (reboot) the Storage Link.
Administration Tab > Advanced
When you click the Advanced tab on the Administration
tab, several other tabs will appear: Groups, Shares, Backup,
Disk, Upgrade, and Setup. These are intended for advanced
users and are described below.
This will break all existing connections. The Storage
Link will immediately restart, and will not be available
again until after the restart is complete. None of your
data will be saved.
•ClickViewLogtoviewthelogfileinaseparatewindow.
The log file is a record of the Storage Link’s activity,
which can help in management and troubleshooting.
Click Refresh to refresh the screen. Click Clear Log to
clear all of the log’s data.
Administration Tab > Groups
The Administration > Groups screen allows you to manage
the User Groups assigned on the Storage Link.
Shutdown Use these fields to set up a shutdown
schedule, if desired. The available options are:
•
•
•
Never This means that scheduled shutdowns will not
be performed.
Every Day Select this to shutdown each day, at the
specified time.
Every Monday, Every Tuesday, ... Select this to
shutdown once per week, on the specified day.
Use the time fields (hour, minute, am/pm) to specify when
the shutdown should be performed.
Restart Use these fields to set up a restart schedule, if
desired. The options for Restart are the same as those for
Shutdown.
Administration > Groups
Disk 1/Disk 2 This displays the types of drives connected
as well as how much space remains.
New Group
Use this area to create a new group. Enter the desired name
for the new group in the Name field and click Create.
E-Mail Alerts
Check the box next to Send E-Mail alerts... to enable the
Storage Link to send alerts via e-Mail. Alerts will be sent
when there is some problem requiring the Administrator’s
attention. Enter the Administrator’s e-mail address(es)
in the E-Mail Address field(s). In the Subject field, you can
enter the text you wish to appear in the Subject field of
e-Mail generated by e-mail alerts.
Existing Groups
ThisshowsthelistofallGroups.Twogroups, administrators
and everyone, refer to those who are administrators and
the group of all users, respectively. These always exist and
cannot be deleted.
Click Access to display the shares that the members of
the current Group are able to access. You can then assign,
remove, or modify the access rights for this group. Click
Members to display the users who are members of the
selected Group. You can then add or delete members. The
everyone Group contains all users, but you cannot add
or remove members. Click Delete to delete a selected
Group. The administrators and everyone Groups cannot
be deleted. Click Help to get more information about this
screen.
Click Save to save any changes. Click Cancel to clear
anything that you entered. Click Refresh to update the
data shown on the screen. Click Details to open a new
window that displays further status details, including a list
of all PCs and other devices that have been allocated an
IP address by the DHCP Server function (if enabled). Click
Help to get more information about this screen.
Network Storage Link for USB 2.0 Disk Drives
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
Administration > Shares
The Administration > Shares screen allows you to create
Administration > Backup
The Administration > Backup screen allows you to back up
the Storage Link’s configuration file to your PC and restore
that configuration file to the Storage Link.
and manage shares.
The configuration file contains all network information,
as well as the User, Group, and Share information. It does
NOT include any information about the files stored on the
Storage Link.
Administration > Shares
Existing Shares
Click Access to view and configure the users who are
allowed to access the selected share. Click Browse to view
the contents of the selected share. Click Delete to delete
the share.
Properties
Administration > Backup
Fill in the Name, Comment, Location and Specify fields, as
specified below, to add a new share. Click Save as New
Share to save your new share. Click Clear Form to clear
the fields in Properties.
Config Backup
Click Download to back up the configuration file to your
PC. Click Upload to restore that file as the Storage Link’s
configuration.
Name The share’s name must be composed of
alphanumeric symbols not exceeding 15 characters in
length.
NOTE: Uploading/Restoring the configuration
file will overwrite and destroy any existing
configuration.
Comment Any comment about the share must be
composed of alphanumeric symbols not exceeding 32
characters in length.
Location This specifies the location of the share. Choose
the radio button beside Default folder or Specify to specify
a different folder.
Drive Backup
This section allows you to schedule backups of Disk 1 onto
Disk 2. Simply click the radio button and use the pull-down
menus to select the day and time. You can also click Start
Backup Now to back up data immediately. Click Save to
save your settings or Cancel to clear the settings.
Click Save to save any changes. Click Help to get more
information about this screen.
Network Storage Link for USB 2.0 Disk Drives
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
Direction Select the desired direction where backing up
will occur:
Data Backup
Data files can be backed up from the Storage Link to
another network device, or from another network device
to the Storage Link. The Backup Jobs field displays any
backup jobs you have defined. If you have not defined
any jobs, the field will be empty. For each job defined, the
following data is shown.
•
•
From this NSLU2 to another device Data on the
Storage Link is backed up to a remote device.
From another device to this NSLU2 Data on a remote
device is backed up to the Storage Link.
This NSLU2
Name This shows the name you assigned to this backup
Share Select the applicable share. If backing up from
the Storage Link, select the share you wish to back up.
If backing up to the Storage Link, select the share where
you want the backed-up data to be stored. When the Sub-
Folder field appears, enter the location of the sub-folder
where the share will be stored.
job.
Source & Destination The name of the source and
destination devices are shown in the form Source =>
Destination.
Date/Time The date and time of the last backup are
shown.
Other Device
Click Backup Now to run the selected backup job
immediately. Click Modify to change the settings of the
selected backup job. Click Delete to delete the selected
backup job. Click Add New Job to open the Define Backup
Job screen, where you can define a new backup job. Click
View Log to view the log of completed backup jobs. Click
Help to get more information about this screen.
Enter the details of the remote device where data will be
backed up.
Name The backup job’s name must be composed of
alphanumeric symbols not exceeding 15 characters in
length.
Shared Folder Enter the name of the shared folder.
Depending on the direction of the backup, this is either
the share to be backed up, or the destination for the
backed-up data.
Define Backup Job
Access requires login If the share is password-protected,
check this box and enter the Login Name and Password
required to gain access to the share.
Options
Schedule This shows the scheduling options for when
the backup will occur.
•
•
Never Select this to disable backup.
Every Day Select this to have the backup job
performed each day, at the specified time.
•
Every Monday, Every Tuesday, ... Select this to have
the backup performed once per week, on the specified
day.
Define Backup Job
The time fields ( hour, minute, am/pm ) allow you to specify
at what time the backup job should be performed.
From this screen, you can add new backup jobs, which
will be displayed on the Administration > Backup screen.
Follow the guidelines below when adding jobs.
Name The backup job’s name must be composed of
alphanumeric symbols not exceeding 15 characters in
length.
Backup Type Select the desired backup type. Selecting
Full will back up all files. The Incremental option will only
back up files as they are changed. Selecting Synchonize
willbackupallfilestostart, thenanyfilesonthedestination
which do not exist on the source are deleted.
Network Storage Link for USB 2.0 Disk Drives
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration
Chapter 3
Click Save to save the settings on this screen. This has
no effect on any operations in progress. Click Cancel to
restore the settings on the screen to their previous values.
Clicking Cancel has no effect on operations in progress.
Click Disk Log to view a log showing the results of the last
Scandisk operation. Click Help to get more information
about this screen.
Administration > Disk
The Administration > Disk screen allows you to perform
disk maintenance.
Administration > Upgrade
TheAdministration>Upgradescreenallowsyoutoupgrade
the Storage Link’s firmware.
Administration > Disk
Format Disk
Use this after installing a new disk. The disk will be
partitioned and formatted. Any data on the disk will be
lost. When formatting a disk that is 80 gigabits or larger,
it may take five minutes or longer for the formatting to
complete.
Administration > Upgrade
To format disk one, click Format Disk1. To format disk
two, click Format Disk2.
Current Firmware
This shows you the current version of the Storage Link’s
firmware. Click Check for Update to browse the Linksys
website for the Storage Link’s latest firmware.
Scandisk
Running the Scandisk (Disk Check) program will check the
file system, and correct any errors found. This program
should be run regularly. The Scandisk program will also
run automatically if an error condition is detected, such as
an abnormal shutdown due to loss of power.
Upgrade
You will need to download the new firmware file to your
PC before upgrading it. Click Browse to locate the upgrade
file on your PC, then click Start Upgrade to apply the
upgrade.
Click Start/Stop Disk1 to scan disk one. Click Start/Stop
Disk2 to scan disk two.
Click Help to get more information about this screen.
Run Scandisk These fields allow you to set up a schedule
for running Scandisk regularly. The available options are:
Administration > Setup
Click the Setup tab under the Administration main tab to
exit the Advanced administration features and return to
the Administration > LAN screen.
•
•
Never Scandisk will not be scheduled to run.
Every Day Select this to have scandisk run each day,
at the specified time.
•
Every Monday, Every Tuesday, ... Select this to have
scandisk run once per week, on the specified day.
Use the time fields ( hour, minute, am/pm ) to specify when
the scandisk operation should be performed.
Network Storage Link for USB 2.0 Disk Drives
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Appendix A
When
I
click the Storage Link’s icon in Network
Appendix A:
Neighborhood, I’m prompted for a password.
Troubleshooting
This can happen in the following situations:
•
•
Your Windows Logon name is recognized by the
Storage Link, but your Logon password is not. Simply
enter your password, or make your Windows password
the same as the Storage Link’s password.
The Storage Link Utility cannot detect the Storage Link.
•
Check that the Storage Linkis properly installed, that
the LAN connections are secure, and that the Storage
Link is powered ON.
Your Windows Logon name is not recognized by the
Storage Link, defaulting you to guest access rights.
If you are not the Network Administrator, ask your
Administrator to create a user name for you. (Use the
same name as your Logon name.)
•
•
If you are using a router, make sure that your PC and
the Storage Link are on the same network segment.
Make sure that your PC has the TCP/IP network
protocol installed. (See Appendix C: Windows Help for
more information.)
•
You do not have access permission for this share.
If you are not the Network Administrator, ask your
Administrator to grant you access.
The Storage Link is configured, but I can’t find it in
Network Neighborhood.
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
•
•
•
Go to the Find function in the Start menu. Choose
Computer, then enter the Storage Link’s name. In
Windows 2000, go to Files and Folders and use the
“Search for a Computer”option.
If this doesn’t work, choose the Network option of the
ControlPaneltocheckthataTCP/IPprotocolisinstalled.
If it isn’t installed, use Add - Protocol - Microsoft - TCP/
IP to install it. In Windows 2000, click Install, not Add.
Check the network bindings. First, make sure that the
TCP/IP protocol is bound to your network card (NIC).
Then, select your network card in the Control Panel,
click Properties, and choose the Bindings tab. If TCP/IP
is not bound (checked), check it.
•
•
Make sure that the TCP/IP -> network card entry is
bound to the Client for Microsoft Networks service.
Select the TCP/IP entry for your network Card, click
Properties, and then choose the Bindings tab. If Client
for Microsoft Networks is not bound (checked), check
it.
If you don’t have a router, make sure that your IP
Address is compatible with the Storage Link’s IP
Address. This means it needs to be in the same address
range (e.g. 192.168.1.3 to 192.168.1.254) and using the
same Subnet Mask (e.g. 255.255.255.0)
•
•
If you do have a router, check that your Gateway IP
Address is set correctly. Ask your LAN administrator for
the correct value.
If you have changed the name of the Storage Link,
change the name back to the default name.
Network Storage Link for USB 2.0 Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Using the Storage Link’s Storage
Appendix B
Windows will then prompt you to log on to the Network
when it boots. You must log on.
Appendix B:
If you press ESC, or click Cancel, no network resources
will be available. When you log on, you need to use a valid
User Name and Password.
Using the Storage Link’s
Storage
If the Network Storage Link Administrator has defined
users on the Network Storage Link, use the User Name
and password they supply.
Overview
Supported versions of Windows are:
If you use a User Name and password which is not
recognized by the Network Storage Link, you can still use
it, with guest access rights. By default, this allows read/
write access to the “public” share, but the Administrator
can set the guest access rights as they wish.
•
•
•
Windows 95/98/ME or later
Windows 2000, NT 4.0
Windows XP
The following items may need to be checked or
configured:
Storing Files
To store files on the Storage Link, you should“Map”a drive
letter to each folder on the Storage Link folder you wish
to access. The “Network Drive” will then be available to all
Windows programs. The procedure is as follows:
•
•
•
TCP/IP protocol
Network Logon (Windows 95/98/ME only)
Mapping to the Network Storage Link’s storage
1. Double-click the Network Neighborhood (or My
Network Places) icon on the desktop.
TCP/IP Setup
2. On the “View” menu, select Details. The Comment
column will now be visible.
Normally, no changes are required to each PC.
Check with your LAN administrator (or Network Storage
Link Administrator) to see if any changes are required.
3. Locate the Storage Link If it is not listed, double-click
Entire Network. Then double-click the Workgroup that
the Storage Link is in. (By default, the Storage Link is in
Workgroup.)
Network Logon (Windows 95/98/ME only)
If your PC uses Windows 2000 or XP, ignore this section.
You do not need to make any changes to your network
configuration.
If your PC uses Windows 95/98/ME, then you must log
on to the network correctly in order to use the Network
Storage Link:
Check your Windows logon by selecting Start, Settings,
Control Panel, Network. Verify that the Primary Network
Logon is set to “Client for Microsoft Networks”. If this is
already set, there is no need to make any changes.
Locating the Storage Link
4. Double-click the icon for the Storage Link.
5. Right-click a folder (directory) to which you have
access, and select Map Network Drive.
6. Select a drive letter for this folder, and check the
Reconnect at Logon checkbox. (If this is not done, the
mapping will be lost when you shut down your PC.)
Network Logon
Network Storage Link for USB 2.0 Disk Drives
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Storage Link’s Storage
Appendix B
Mapping the Network Drive
7. Click OK.
This drive will now be available in Windows Explorer,
and from the File, Open or File, Save As dialog box in all
Windows applications.
On Windows 95/98/ME, when you try to access a folder,
you may be prompted for a password. If your Windows
logon name is the same as your user name on the Storage
Link, but the passwords are different, you can enter your
Storage Link password here. If your Windows logon name
does not exist on the Storage Link, however, you will have
only guest access rights, and there is no password which
you can enter in this dialog.
Network Storage Link for USB 2.0 Disk Drives
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Appendix C
Appendix C:
Specifications
Model
NSLU2
Standards
IEEE 802.3, IEEE 802.3u,
USB 1.1, USB 2.0
Protocols
Ports
SMB/CIFS over TCP/IP
One 10/100 Mbps RJ-45,
Power, Two USB 2.0
Cabling Type
Topology
LEDs
UTP CAT 5 or better
Star
Ready/Status, Ethernet,
Disk 2, Disk 1
Switches
Power, Reset
Environmental
Dimensions
1.08" x 5.31" x 3.78"
(27.5 x 135 x 96 mm)
Weight
6.5 oz. (185 g)
Power
5V DC, Maximum 2 Amps
FCC Class B, CE, VCCI
41 to 104ºF (5 to 40ºC)
-4 to 158ºF (-20 to 70ºC)
10 to 85% Noncondensing
5 to 90% Noncondensing
Certifications
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
Network Storage Link for USB 2.0 Disk Drives
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Warranty Information
Appendix D
service offerings. This limited warranty shall not apply to
such third party software or service offerings. This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require.
Appendix D:
Warranty Information
Limited Warranty
TO THE EXTENT NOT PROHIBITED BY LAW, ALL IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED TO THE DURATION OF THE
WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.
Some jurisdictions do not allow limitations on how long
an implied warranty lasts, so the above limitation may not
apply to you. This limited warranty gives you specific legal
rights, and you may also have other rights which vary by
jurisdiction.
Linksys warrants this Linksys hardware product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
•
•
One (1) year for new product
Ninety (90) days for refurbished product
This limited warranty is non-transferable and extends only
to the original end-user purchaser. Your exclusive remedy
and Linksys’ entire liability under this limited warranty
will be for Linksys, at its option, to (a) repair the product
with new or refurbished parts, (b) replace the product
with a reasonably available equivalent new or refurbished
Linksys product, or (c) refund the purchase price of the
product less any rebates. Any repaired or replacement
products will be warranted for the remainder of the
original Warranty Period or thirty (30) days, whichever is
longer. All products and parts that are replaced become
the property of Linksys.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT
WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE
THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING
OUT OF OR RELATED TO THE USE OF OR INABILITY TO
USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN
IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO EVENT WILL LINKSYS’ LIABILITY
EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.
The foregoing limitations will apply even if any warranty
or remedy provided under this limited warranty fails of
its essential purpose. Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to you.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys, (c)
the product damage was caused by use with non-Linksys
products, (d) the product has not been installed, operated,
repaired, or maintained in accordance with instructions
supplied by Linksys, (e) the product has been subjected to
abnormal physical or electrical stress, misuse, negligence,
or accident, (f) the serial number on the Product has been
altered, defaced, or removed, or (g) the product is supplied
or licensed for beta, evaluation, testing or demonstration
purposes for which Linksys does not charge a purchase
price or license fee.
Obtaining Warranty Service
If you have a question about your product or experience a
problem with it, please go to www.linksys.com/support
where you will find a variety of online support tools and
information to assist you with your product. If the product
proves defective during the Warranty Period, contact
Linksys Technical Support for instructions on how to
obtain warranty service.The telephone number for Linksys
Technical Support in your area can be found in the product
serial number and proof of purchase on hand when calling.
A DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED
TO PROCESS WARRANTY CLAIMS. If you are requested to
return your product, you will be given a Return Materials
Authorization (RMA) number. You are responsible for
properly packaging and shipping your product to Linksys
at your cost and risk. You must include the RMA number
and a copy of your dated proof of original purchase when
returning your product. Products received without a RMA
number and dated proof of original purchase will be
ALL SOFTWARE PROVIDED BY LINKSYS WITH THE
PRODUCT, WHETHER FACTORY LOADED ON THE
PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING
THE PRODUCT, IS PROVIDED “AS IS”WITHOUT WARRANTY
OF ANY KIND. Without limiting the foregoing, Linksys does
not warrant that the operation of the product or software
will be uninterrupted or error free. Also, due to the
continual development of new techniques for intruding
upon and attacking networks, Linksys does not warrant
that the product, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack. The product
may include or be bundled with third party software or
Network Storage Link for USB 2.0 Disk Drives
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Information
Appendix D
rejected. Do not include any other items with the product
you are returning to Linksys. Defective product covered
by this limited warranty will be repaired or replaced and
returned to you without charge. Customers outside of
the United States of America and Canada are responsible
for all shipping and handling charges, custom duties,
VAT and other associated taxes and charges. Repairs or
replacements not covered under this limited warranty will
be subject to charge at Linksys’then-current rates.
Technical Support
This limited warranty is neither a service nor a support
contract. Information about Linksys’ current technical
support offerings and policies (including any fees for
support services) can be found at:
This limited warranty is governed by the laws of the
jurisdiction in which the Product was purchased by you.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.
Network Storage Link for USB 2.0 Disk Drives
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix E
Avis d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la
Appendix E:
Regulatory Information
norme NMB-003 du Canada.
Le fonctionnement est soumis aux conditions suivantes :
1. Ce périphérique ne doit pas causer d’interférences;
FCC Statement
This product has been tested and complies with the
specifications for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
2. Ce périphérique doit accepter toutes les interférences
reçues, y compris celles qui risquent d’entraîner un
fonctionnement indésirable.
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment or
devices
•
•
Connect the equipment to an outlet other than the
receiver’s
Consult a dealer or an experienced radio/TV technician
for assistance
Safety Notices
•
•
•
Caution: To reduce the risk of fire, use only No.26 AWG
or larger telecommunication line cord.
Do not use this product near water, for example, in a
wet basement or near a swimming pool.
Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
WARNING: This product contains lead, known
to the State of California to cause cancer, and
birth defects or other reproductive harm. Wash
hands after handling.
Industry Canada Statement
This Class B digital apparatus complies with Canadian
ICES-003.
Operation is subject to the following two conditions:
1. This device may not cause interference and
2. This device must accept any interference, including
interference that may cause undesired operation of
the device.
Network Storage Link for USB 2.0 Disk Drives
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix E
Čeština (Czech) - Informace o ochraně životního
prostředí pro zákazníky v zemích Evropské unie
User Information for Consumer Products
Covered by EU Directive 2002/96/EC on
Waste Electric and Electronic Equipment
(WEEE)
This document contains important information for users
with regards to the proper disposal and recycling of
Linksys products. Consumers are required to comply with
this notice for all electronic products bearing the following
symbol:
Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené
tímto symbolem na produktu anebo na obalu bylo likvidováno
s netříděným komunálním odpadem. Tento symbol udává,
že daný produkt musí být likvidován odděleně od běžného
komunálního odpadu. Odpovídáte za likvidaci tohoto produktu
a dalších elektrických a elektronických zařízení prostřednictvím
určených sběrných míst stanovených vládou nebo místními
úřady. Správná likvidace
a
recyklace pomáhá předcházet
potenciálním negativním dopadům na životní prostředí a lidské
zdraví. Podrobnější informace o likvidaci starého vybavení si
laskavě vyžádejte od místních úřadů, podniku zabývajícího se
likvidací komunálních odpadů nebo obchodu, kde jste produkt
zakoupili.
Dansk (Danish) - Miljøinformation for kunder i EU
EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol
på produktet og/eller emballagen ikke må bortskaffes som
usorteret kommunalt affald. Symbolet betyder, at dette produkt
skal bortskaffes adskilt fra det almindelige husholdningsaffald.
Det er dit ansvar at bortskaffe dette og andet elektrisk og
elektronisk udstyr via bestemte indsamlingssteder udpeget
af staten eller de lokale myndigheder. Korrekt bortskaffelse
og genvinding vil hjælpe med til at undgå mulige skader for
miljøet og menneskers sundhed. Kontakt venligst de lokale
myndigheder, renovationstjenesten eller den butik, hvor du
har købt produktet, angående mere detaljeret information om
bortskaffelse af dit gamle udstyr.
English - Environmental Information for Customers in
the European Union
European Directive 2002/96/EC requires that the equipment
bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol
indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility to
dispose of this and other electric and electronic equipment via
designated collection facilities appointed by the government or
local authorities. Correct disposal and recycling will help prevent
potential negative consequences to the environment and
human health. For more detailed information about the disposal
of your old equipment, please contact your local authorities,
waste disposal service, or the shop where you purchased the
product.
Deutsch (German) - Umweltinformation für Kunden
innerhalb der Europäischen Union
Die Europäische Richtlinie 2002/96/EC verlangt, dass technische
Ausrüstung, die direkt am Gerät und/oder an derVerpackung mit
diesem Symbol versehen ist , nicht zusammen mit unsortiertem
Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf
hin, dass das Produkt von regulärem Haushaltmüll getrennt
entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses
Gerät und andere elektrische und elektronische Geräte über
die dafür zuständigen und von der Regierung oder örtlichen
Behörden dazu bestimmten Sammelstellen zu entsorgen.
Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei,
potentielle negative Folgen für Umwelt und die menschliche
Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur
Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an
die örtlichen Behörden oder städtischen Entsorgungsdienste
oder an den Händler, bei dem Sie das Produkt erworben haben.
Български (Bulgarian)
-
Информация относно
опазването на околната среда за потребители в
Европейския съюз
Европейска директива 2002/96/EC изисква уредите, носещи
този символ върху изделието и/или опаковката му, да не
се изхвърля т с несортирани битови отпадъци. Символът
обозначава, че изделието трябва да се изхвърля отделно от
сметосъбирането на обикновените битови отпадъци. Ваша
е отговорността този и другите електрически и електронни
уреди да се изхвърлят в предварително определени от
държавните или общински органи специализирани пунктове
за събиране. Правилното изхвърляне
и
рециклиране
ще спомогнат да се предотвратят евентуални вредни за
околната среда и здравето на населението последствия. За
по-подробна информация относно изхвърлянето на вашите
стари уреди се обърнете към местните власти, службите за
сметосъбиране или магазина, от който сте закупили уреда.
Network Storage Link for USB 2.0 Disk Drives
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix E
Eesti (Estonian)
Euroopa Liidus asuvatele klientidele
-
Keskkonnaalane informatsioon
Français (French) - Informations environnementales
pour les clients de l’Union européenne
Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on
La directive européenne 2002/96/CE exige que l’équipement
sur lequel est apposé ce symbole sur le produit et/ou son
emballage ne soit pas jeté avec les autres ordures ménagères. Ce
symbole indique que le produit doit être éliminé dans un circuit
distinct de celui pour les déchets des ménages. Il est de votre
responsabilité de jeter ce matériel ainsi que tout autre matériel
électrique ou électronique par les moyens de collecte indiqués
par le gouvernement et les pouvoirs publics des collectivités
territoriales. L’élimination et le recyclage en bonne et due forme
ont pour but de lutter contre l’impact néfaste potentiel de ce
type de produits sur l’environnement et la santé publique. Pour
plus d’informations sur le mode d’élimination de votre ancien
équipement, veuillez prendre contact avec les pouvoirs publics
locaux, le service de traitement des déchets, ou l’endroit où vous
avez acheté le produit.
seadmeid, millel on tootel või pakendil käesolev sümbol
,
keelatud kõrvaldada koos sorteerimata olmejäätmetega. See
sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest
olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva
ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike
ametiasutuste poolt ette nähtud kogumispunktide kaudu.
Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida
võimalikke negatiivseid tagajärgi keskkonnale ning inimeste
tervisele. Vanade seadmete kõrvaldamise kohta täpsema
informatsiooni saamiseks võtke palun ühendust kohalike
ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te
toote ostsite.
Español (Spanish) - Información medioambiental para
clientes de la Unión Europea
Italiano (Italian) - Informazioni relative all’ambiente
per i clienti residenti nell’Unione Europea
La direttiva europea 2002/96/EC richiede che le apparecchiature
La Directiva 2002/96/CE de la UE exige que los equipos que
lleven este símbolo en el propio aparato y/o en su embalaje
no deben eliminarse junto con otros residuos urbanos no
seleccionados. El símbolo indica que el producto en cuestión
debe separarse de los residuos domésticos convencionales con
vistas a su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de
los puntos de recogida que ponen a su disposición el gobierno y
lasautoridadeslocales. Aldesecharyreciclarcorrectamenteestos
aparatos estará contribuyendo a evitar posibles consecuencias
negativas para el medio ambiente y la salud de las personas. Si
desea obtener información más detallada sobre la eliminación
segura de su aparato usado, consulte a las autoridades locales,
al servicio de recogida y eliminación de residuos de su zona o
pregunte en la tienda donde adquirió el producto.
contrassegnate con questo simbolo
sul prodotto e/o
sull’imballaggio non siano smaltite insieme ai rifiuti urbani
non differenziati. Il simbolo indica che questo prodotto non
deve essere smaltito insieme ai normali rifiuti domestici. È
responsabilità del proprietario smaltire sia questi prodotti sia
le altre apparecchiature elettriche ed elettroniche mediante
le specifiche strutture di raccolta indicate dal governo o dagli
enti pubblici locali. Il corretto smaltimento ed il riciclaggio
aiuteranno a prevenire conseguenze potenzialmente negative
per l’ambiente e per la salute dell’essere umano. Per ricevere
informazioni più dettagliate circa lo smaltimento delle vecchie
apparecchiature in Vostro possesso, Vi invitiamo a contattare gli
enti pubblici di competenza, il servizio di smaltimento rifiuti o il
negozio nel quale avete acquistato il prodotto.
Ελληνικά (Greek)
-
Στοιχεία περιβαλλοντικής
προστασίας για πελάτες εντός της Ευρωπαϊκής
Ένωσης
Latviešu valoda (Latvian) - Ekoloģiska informācija
klientiem Eiropas Savienības jurisdikcijā
Σύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που
φέρει αυτό το σύμβολο στο προϊόν ή/και τη συσκευασία του
δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά
απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα
πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά
απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος
και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των
καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων,
οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές.
Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη
ενδεχόμενων αρνητικών επιπτώσεων στο περιβάλλον και την
υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη
του παλαιού σας εξοπλισμού, επικοινωνήστε με τις τοπικές αρχές,
τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα από
το οποίο αγοράσατε το προϊόν.
Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota
zīme uz paša izstrādājuma vai uz tā iesaiņojuma, nedrīkst
izmest nešķirotā veidā kopā ar komunālajiem atkritumiem
(tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē
to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar
parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo
un citas elektriskas un elektroniskas ierīces izmest atkritumos,
izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko
nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos
un pārstrāde tiek veikta pareizi, tad mazinās iespējamais
kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par
novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt
vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā,
kur iegādājāties šo izstrādājumu.
Network Storage Link for USB 2.0 Disk Drives
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix E
Lietuvškai (Lithuanian) - Aplinkosaugos informacija,
skirta Europos Sąjungos vartotojams
Nederlands (Dutch) - Milieu-informatie voor klanten
in de Europese Unie
Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir
kurios pakuotė yra pažymėta šiuo simboliu (įveskite simbolį),
negalima šalinti kartu su nerūšiuotomis komunalinėmis
atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai
nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad
ši ir kita elektros ar elektroninė įranga būtų šalinama per tam
tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo
sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta
galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos
apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios
institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose
įsigijote tą gaminį.
De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die
is voorzien van dit symbool op het product of de verpakking,
niet mag worden ingezameld met niet-gescheiden huishoudelijk
afval. Dit symbool geeft aan dat het product apart moet worden
ingezameld. U bent zelf verantwoordelijk voor de vernietiging
vandezeenandereelektrischeenelektronischeapparatuurviade
daarvoor door de landelijke of plaatselijke overheid aangewezen
inzamelingskanalen. De juiste vernietiging en recycling van
deze apparatuur voorkomt mogelijke negatieve gevolgen voor
het milieu en de gezondheid. Voor meer informatie over het
vernietigen van uw oude apparatuur neemt u contact op met
de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de
winkel waar u het product hebt aangeschaft.
Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti
fl-Unjoni Ewropea
Norsk (Norwegian) - Miljøinformasjon for kunder i EU
EU-direktiv 2002/96/EF krever at utstyr med følgende symbol
avbildet på produktet og/eller pakningen, ikke må kastes
sammen med usortert avfall. Symbolet indikerer at dette
produktet skal håndteres atskilt fra ordinær avfallsinnsamling
for husholdningsavfall. Det er ditt ansvar å kvitte deg med
dette produktet og annet elektrisk og elektronisk avfall via egne
innsamlingsordninger slik myndighetene eller kommunene
bestemmer. Korrekt avfallshåndtering og gjenvinning vil
være med på å forhindre mulige negative konsekvenser for
miljø og helse. For nærmere informasjon om håndtering av
det kasserte utstyret ditt, kan du ta kontakt med kommunen,
en innsamlingsstasjon for avfall eller butikken der du kjøpte
produktet.
Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih is-
simbolu fuq il-prodott u/jew fuq l-ippakkjar ma jistax jintrema
ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu jindika
li dan il-prodott għandu jintrema separatament minn ma’ l-
iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi
dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku
permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew
mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin
jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u
għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata
dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja
lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew
il-ħanut minn fejn xtrajt il-prodott.
Polski (Polish) - Informacja dla klientów w Unii
Magyar (Hungarian) - Környezetvédelmi információ az
európai uniós vásárlók számára
Europejskiej
środowiska
o
przepisach dotyczących ochrony
A 2002/96/EC számú európai uniós irányelv megkívánja, hogy
azokat a termékeket, amelyeken, és/vagy amelyek csomagolásán
az alábbi címke megjelenik, tilos a többi szelektálatlan lakossági
hulladékkal együtt kidobni. A címke azt jelöli, hogy az adott
termék kidobásakor a szokványos háztartási hulladékelszállítási
rendszerektõl elkülönített eljárást kell alkalmazni. Az Ön
felelõssége, hogy ezt, és más elektromos és elektronikus
berendezéseit a kormányzati vagy a helyi hatóságok által
kijelölt gyűjtõredszereken keresztül számolja fel. A megfelelõ
hulladékfeldolgozás segít a környezetre és az emberi egészségre
potenciálisan ártalmas negatív hatások megelõzésében. Ha
elavult berendezéseinek felszámolásához további részletes
információra van szüksége, kérjük, lépjen kapcsolatba a helyi
hatóságokkal, a hulladékfeldolgozási szolgálattal, vagy azzal
üzlettel, ahol a terméket vásárolta.
Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt
oznaczony symbolem znajdującym się na produkcie i/lub jego
opakowaniu nie był wyrzucany razem z innymi niesortowanymi
odpadami komunalnymi. Symbol ten wskazuje, że produkt
nie powinien być usuwany razem ze zwykłymi odpadami z
gospodarstw domowych. Na Państwu spoczywa obowiązek
wyrzucania tego
i
innych urządzeń elektrycznych oraz
elektronicznychwpunktachodbioruwyznaczonychprzezwładze
krajowe lub lokalne. Pozbywanie się sprzętu we właściwy sposób
i jego recykling pomogą zapobiec potencjalnie negatywnym
konsekwencjom dla środowiska i zdrowia ludzkiego. W celu
uzyskania szczegółowych informacji o usuwaniu starego sprzętu,
prosimy zwrócić się do lokalnych władz, służb oczyszczania
miasta lub sklepu, w którym produkt został nabyty.
Network Storage Link for USB 2.0 Disk Drives
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Information
Appendix E
Português (Portuguese) - Informação ambiental para
clientes da União Europeia
Slovenščina (Slovene) - Okoljske informacije za stranke
v Evropski uniji
A Directiva Europeia 2002/96/CE exige que o equipamento
que exibe este símbolo no produto e/ou na sua embalagem
não seja eliminado junto com os resíduos municipais não
Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s
tem simbolom – na izdelku in/ali na embalaži z nesortiranimi
komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek
zavreči ločeno od preostalih gospodinjskih odpadkov. Vaša
odgovornost je, da to in preostalo električno in elektronsko
opremo oddate na posebna zbirališča, ki jih določijo državne
separados.
O
símbolo indica que este produto deve ser
eliminado separadamente dos resíduos domésticos regulares.
É da sua responsabilidade eliminar este e qualquer outro
equipamento eléctrico e electrónico através das instalações
de recolha designadas pelas autoridades governamentais ou
locais. A eliminação e reciclagem correctas ajudarão a prevenir
as consequências negativas para o ambiente e para a saúde
humana. Para obter informações mais detalhadas sobre a
forma de eliminar o seu equipamento antigo, contacte as
autoridades locais, os serviços de eliminação de resíduos ou o
estabelecimento comercial onde adquiriu o produto.
ustanove ali lokalne oblasti.
S
pravilnim odlaganjem in
recikliranjem boste preprečili morebitne škodljive vplive na
okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare
opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali
trgovino, kjer ste izdelek kupili.
Suomi (Finnish) - Ympäristöä koskevia tietoja EU-
alueen asiakkaille
EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä
Română (Romanian) - Informaţii de mediu pentru
clienţii din Uniunea Europeană
symboli
itse tuotteessa ja/tai sen pakkauksessa, laitteistoa
ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana.
Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään
tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää
tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet
viemällä tuote tai tuotteet viranomaisten määräämään
keräyspisteeseen. Laitteiston oikea hävittäminen estää
mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten
terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta
saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä
myymälästä, josta ostit tuotteen.
Directiva europeană 2002/96/CE impune ca echipamentele care
prezintă acest simbol pe produs şi/sau pe ambalajul acestuia să
nu fie casate împreună cu gunoiul menajer municipal. Simbolul
indică faptul că acest produs trebuie să fie casat separat de
gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi
acest produs şi alte echipamente electrice şi electronice prin
intermediul unităţilor de colectare special desemnate de guvern
sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta
la prevenirea potenţialelor consecinţe negative asupra sănătăţii
mediului şi a oamenilor. Pentru mai multe informaţii detaliate
cu privire la casarea acestui echipament vechi, contactaţi
autorităţile locale, serviciul de salubrizare sau magazinul de la
care aţi achiziţionat produsul.
Svenska (Swedish) - Miljöinformation för kunder i
Europeiska unionen
Det europeiska direktivet 2002/96/EC kräver att utrustning med
denna symbol på produkten och/eller förpackningen inte får
kastas med osorterat kommunalt avfall. Symbolen visar att denna
produktbörkastasefterattdenavskiljtsfrånvanligthushållsavfall.
Det faller på ditt ansvar att kasta denna och annan elektrisk och
elektronisk utrustning på fastställda insamlingsplatser utsedda
av regeringen eller lokala myndigheter. Korrekt kassering och
återvinning skyddar mot eventuella negativa konsekvenser
för miljön och personhälsa. För mer detaljerad information om
kassering av din gamla utrustning kontaktar du dina lokala
myndigheter, avfallshanteringen eller butiken där du köpte
produkten.
Slovenčina (Slovak) - Informácie o ochrane životného
prostredia pre zákazníkov v Európskej únii
Podľa európskej smernice 2002/96/ES zariadenie
s
týmto
symbolom
na produkte a/alebo jeho balení nesmie byť
likvidované spolu
s
netriedeným komunálnym odpadom.
Symbol znamená, že produkt by sa mal likvidovať oddelene
od bežného odpadu z domácností. Je vašou povinnosťou
likvidovať toto i ostatné elektrické a elektronické zariadenia
prostredníctvom špecializovaných zberných zariadení určených
vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia
pomôže zabrániť prípadným negatívnym dopadom na životné
prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie
informácie o likvidácii starého zariadenia, obráťte sa, prosím, na
miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov
alebo obchod, v ktorom ste si produkt zakúpili.
WEB: For additional information, please visit
Network Storage Link for USB 2.0 Disk Drives
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
Schedule 1 - Linksys Software License Agreement
Appendix F: Software
License Agreement
THIS LICENSE AGREEMENT IS BETWEEN YOU AND
CISCO-LINKSYS LLC OR ONE OF ITS AFFILIATES CISCO
SYSTEMS-LINKSYS (ASIA) PTE LTD. OR CISCO-LINKSYS
K.K. (“LINKSYS”) LICENSING THE SOFTWARE INSTEAD OF
CISCO-LINKSYS LLC. BY DOWNLOADING OR INSTALLING
THE SOFTWARE, OR USING THE PRODUCT CONTAINING
THE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY
THIS AGREEMENT. IFYOU DO NOT AGREE TO ALL OF THESE
TERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USE
THE SOFTWARE. YOU MAY RETURN UNUSED SOFTWARE
(OR, IF THE SOFTWARE IS SUPPLIED AS PART OF ANOTHER
PRODUCT, THE UNUSED PRODUCT) FOR A FULL REFUND
UP TO 30 DAYS AFTER ORIGINAL PURCHASE, SUBJECT TO
THE RETURN PROCESS AND POLICIES OF THE PARTY FROM
WHICH YOU PURCHASED SUCH PRODUCT OR SOFTWARE.
Software in Linksys Products
This product from Cisco-Linksys LLC or from one of its
affiliates Cisco Systems-Linksys (Asia) Pte Ltd. or Cisco-
Linksys K.K. (“Linksys”) contains software (including
firmware) originating from Linksys and its suppliers
and may also contain software from the open source
community. Any software originating from Linksys and its
suppliers is licensed under the Linksys Software License
Agreement contained at Schedule 1 below. You may also
be prompted to review and accept that Linksys Software
License Agreement upon installation of the software
License. Subject to the terms and conditions of this
Agreement, Linksys grants the original end user purchaser
of the Linksys product containing the Software (“You”)
a nonexclusive license to use the Software solely as
embedded in or (where authorized in the applicable
documentation) for communication with such product.
This license may not be sublicensed, and is not transferable
except to a person or entity to which you transfer
ownership of the complete Linksys product containing
the Software, provided you permanently transfer all rights
under this Agreement and do not retain any full or partial
copies of the Software, and the recipient agrees to the
terms of this Agreement.
Any software from the open source community is licensed
under the specific license terms applicable to that software
provided for in Schedules 2, 3 and 4 below.
Where such specific license terms entitle you to the source
code of such software, that source code is upon request
available at cost from Linksys for at least three years
from the purchase date of this product and may also be
detailed license terms and additional information on
open source software in Linksys products please look at
Schedules 2, 3 or 4 below as applicable.
“Software” includes, and this Agreement will apply to
(a) the software of Linksys or its suppliers provided in or
with the applicable Linksys product, excluding technology
from the open source community, and (b) any upgrades,
updates, bug fixes or modified versions (“Upgrades”) or
backup copies of the Software supplied to You by Linksys
or an authorized reseller, provided you already hold a
valid license to the original software and have paid any
applicable fee for the Upgrade.
BY DOWNLOADING OR INSTALLING THE SOFTWARE,
OR USING THE PRODUCT CONTAINING THE SOFTWARE,
YOU ARE CONSENTING TO BE BOUND BY THE SOFTWARE
LICENSE AGREEMENTS BELOW. IF YOU DO NOT AGREE TO
ALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD,
INSTALL OR USE THE SOFTWARE. YOU MAY RETURN
UNUSED SOFTWARE (OR, IF THE SOFTWARE IS SUPPLIED
AS PART OF ANOTHER PRODUCT, THE UNUSED PRODUCT)
FOR A FULL REFUND UP TO 30 DAYS AFTER ORIGINAL
PURCHASE, SUBJECT TO THE RETURN PROCESS AND
POLICIES OF THE PARTY FROM WHICH YOU PURCHASED
SUCH PRODUCT OR SOFTWARE.
Protection of Information. The Software and
documentation contain trade secrets and/or copyrighted
materials of Linksys or its suppliers. You will not copy
or modify the Software or decompile, decrypt, reverse
engineer or disassemble the Software (except to the
extent expressly permitted by law notwithstanding this
provision), and You will not disclose or make available
such trade secrets or copyrighted material in any form
to any third party. Title to and ownership of the Software
and documentation and any portion thereof, will remain
solely with Linksys or its suppliers.
Software Licenses
The software Licenses applicable to software from Linksys
are made available at the Linksys public web site at:
www.linksys.com. For your convenience of reference, a
copy of the Linksys Software License Agreement and the
main open source code licenses used by Linksys in its
products are contained in the Schedules below.
Collection and Processing of Information. You agree that
Linksys and/or its affiliates may, from time to time, collect
and process information about your Linksys product and/
or the Software and/or your use of either in order (i) to
enable Linksys to offer you Upgrades; (ii) to ensure that
Network Storage Link for USB 2.0 Disk Drives
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
your Linksys product and/or the Software is being used in
accordancewiththetermsofthisAgreement;(iii)toprovide
improvements to the way Linksys delivers technology to
you and to other Linksys customers; (iv) to enable Linksys
to comply with the terms of any agreements it has with
any third parties regarding your Linksys product and/or
Software and/or (v) to enable Linksys to comply with all
applicable laws and/or regulations, or the requirements
of any regulatory authority or government agency.
Linksys and/ or its affiliates may collect and process
this information provided that it does not identify you
personally. Your use of your Linksys product and/or the
Software constitutes this consent by you to Linksys and/
or its affiliates’collection and use of such information and,
for EEA customers, to the transfer of such information to a
location outside the EEA.
OR RELATED TO THE USE OF OR INABILITY TO USE THE
SOFTWARE, EVEN IF LINKSYS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL
LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU
FOR THE PRODUCT. The foregoing limitations will apply
even if any warranty or remedy under this Agreement fails
of its essential purpose. Some jurisdictions do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not
apply to You.
Export. Software, including technical data, may be subject
to U.S. export control laws and regulations and/or export
or import regulations in other countries. You agree to
comply strictly with all such laws and regulations.
U.S. Government Users. The Software and documentation
qualify as “commercial items” as defined at 48 C.F.R. 2.101
and 48 C.F.R. 12.212. All Government users acquire the
Software and documentation with only those rights
herein that apply to non-governmental customers.
Software Upgrades etc. If the Software enables you to
receive Upgrades, you may elect at any time to receive
these Upgrades either automatically or manually. If you
elect to receive Upgrades manually or you otherwise
elect not to receive or be notified of any Upgrades, you
may expose your Linksys product and/or the Software
to serious security threats and/or some features within
your Linksys product and/or Software may become
inaccessible. There may be circumstances where we
apply an Upgrade automatically in order to comply with
changes in legislation, legal or regulatory requirements
or as a result of requirements to comply with the terms
of any agreements Linksys has with any third parties
regarding your Linksys product and/or the Software. You
will always be notified of any Upgrades being delivered
to you. The terms of this license will apply to any such
Upgrade unless the Upgrade in question is accompanied
by a separate license, in which event the terms of that
license will apply.
General Terms. This Agreement will be governed by and
construed in accordance with the laws of the State of
California, without reference to conflict of laws principles.
The United Nations Convention on Contracts for the
International Sale of Goods will not apply. If any portion
of this Agreement is found to be void or unenforceable,
the remaining provisions will remain in full force and
effect. This Agreement constitutes the entire agreement
between the parties with respect to the Software and
supersedes any conflicting or additional terms contained
in any purchase order or elsewhere.
END OF SCHEDULE 1
Schedule 2
If this Linksys product contains open source software
licensed under Version 2 of the “GNU General Public
License” then the license terms below in this Schedule 2
will apply to that open source software. The license terms
below in this Schedule 2 are from the public web site at
Open Source Software. The GPL or other open source
code incorporated into the Software and the open source
licenseforsuchsourcecodeareavailableforfreedownload
of the GPL or other open source code in this Software on a
CD, Linksys will mail to You a CD with such code for $9.99
plus the cost of shipping, upon request.
GNU GENERAL PUBLIC LICENSE
Term and Termination. You may terminate this License
at any time by destroying all copies of the Software
and documentation. Your rights under this License will
terminate immediately without notice from Linksys if You
fail to comply with any provision of this Agreement.
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA
Limited Warranty. The warranty terms and period
specified in the applicable Linksys Product User Guide
shall also apply to the Software.
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Disclaimer of Liabilities. IN NO EVENT WILL LINKSYS OR
ITS SUPPLIERS BE LIABLE FOR ANY LOST DATA, REVENUE
OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF
CAUSE (INCLUDING NEGLIGENCE), ARISING OUT OF
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the
Network Storage Link for USB 2.0 Disk Drives
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
GNU General Public License is intended to guarantee your
freedom to share and change free software–to make sure
the software is free for all its users. This General Public
License applies to most of the Free Software Foundation’s
software and to any other program whose authors
commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work
which contains a notice placed by the copyright
holder saying it may be distributed under the terms
of this General Public License. The “Program”, below,
refers to any such program or work, and a “work
based on the Program” means either the Program
or any derivative work under copyright law: that is
to say, a work containing the Program or a portion
of it, either verbatim or with modifications and/
or translated into another language. (Hereinafter,
translation is included without limitation in the term
“modification”.) Each licensee is addressed as “you”.
When we speak of free software, we are referring to
freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to
distribute copies of free software (and charge for this
service if you wish), that you receive source code or can
get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know
you can do these things.
Activities other than copying, distribution and
modification are not covered by this License; they
are outside its scope. The act of running the Program
is not restricted, and the output from the Program is
covered only if its contents constitute a work based on
the Program (independent of having been made by
running the Program). Whether that is true depends
on what the Program does.
To protect your rights, we need to make restrictions that
forbid anyone to deny you these rights or to ask you to
surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the
software, or if you modify it.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients
all the rights that you have. You must make sure that they,
too, receive or can get the source code. And you must
show them these terms so they know their rights.
1. You may copy and distribute verbatim copies of the
Program’s source code as you receive it, in any medium,
provided that you conspicuously and appropriately
publish on each copy an appropriate copyright
notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence
of any warranty; and give any other recipients of the
Program a copy of this License along with the Program.
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you
legal permission to copy, distribute and/or modify the
software.
Also, for each author’s protection and ours, we want to
make certain that everyone understands that there is no
warranty for this free software. If the software is modified
by someone else and passed on, we want its recipients
to know that what they have is not the original, so that
any problems introduced by others will not reflect on the
original authors’reputations.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
2. You may modify your copy or copies of the Program
or any portion of it, thus forming a work based on the
Program, and copy and distribute such modifications
or work under the terms of Section 1 above, provided
that you also meet all of these conditions:
Finally, any free program is threatened constantly by
software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary.
To prevent this, we have made it clear that any patent must
be licensed for everyone’s free use or not licensed at all.
a. You must cause the modified files to carry
prominent notices stating that you changed the
files and the date of any change.
b. You must cause any work that you distribute or
publish, that in whole or in part contains or is
derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties
under the terms of this License.
The precise terms and conditions for copying, distribution
and modification follow.
Network Storage Link for USB 2.0 Disk Drives
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
c. If the modified program normally reads commands
c. Accompany it with the information you received as
totheoffertodistributecorrespondingsourcecode.
(This alternative is allowed only for noncommercial
distribution and only if you received the program
in object code or executable form with such an
offer, in accord with Subsection b above.)
interactively when run, you must cause it, when
started running for such interactive use in the most
ordinary way, to print or display an announcement
including an appropriate copyright notice and
a notice that there is no warranty (or else, saying
that you provide a warranty) and that users may
redistribute the program under these conditions,
and telling the user how to view a copy of
this License. (Exception: if the Program itself is
interactive but does not normally print such an
announcement, your work based on the Program
is not required to print an announcement.)
The source code for a work means the preferred form
of the work for making modifications to it. For an
executable work, complete source code means all
the source code for all modules it contains, plus any
associated interface definition files, plus the scripts
used to control compilation and installation of the
executable. However, as a special exception, the source
code distributed need not include anything that is
normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so
on) of the operating system on which the executable
runs, unless that component itself accompanies the
executable.
These requirements apply to the modified work as
a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do not
apply to those sections when you distribute them as
separate works. But when you distribute the same
sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each
and every part regardless of who wrote it.
If distribution of executable or object code is made
by offering access to copy from a designated place,
then offering equivalent access to copy the source
code from the same place counts as distribution of
the source code, even though third parties are not
compelled to copy the source along with the object
code.
Thus, it is not the intent of this section to claim rights
or contest your rights to work written entirely by you;
rather, the intent is to exercise the right to control the
distribution of derivative or collective works based on
the Program.
4. You may not copy, modify, sublicense, or distribute
the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will
automatically terminate your rights under this License.
However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full
compliance.
In addition, mere aggregation of another work not
based on the Program with the Program (or with a
work based on the Program) on a volume of a storage
or distribution medium does not bring the other work
under the scope of this License.
5. You are not required to accept this License, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if
you do not accept this License.Therefore, by modifying
or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying,
distributing or modifying the Program or works based
on it.
3. You may copy and distribute the Program (or a
work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2
above provided that you also do one of the following:
a. Accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange; or,
b. Accompany it with a written offer, valid for at least
three years, to give any third party, for a charge
no more than your cost of physically performing
source distribution, a complete machine-readable
copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange; or,
6. Each time you redistribute the Program (or any work
based on the Program), the recipient automatically
receives a license from the original licensor to copy,
distribute or modify the Program subject to these
terms and conditions. You may not impose any further
restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing
compliance by third parties to this License.
Network Storage Link for USB 2.0 Disk Drives
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
7. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not
limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If
you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other
pertinent obligations, then as a consequence you
may not distribute the Program at all. For example,
if a patent license would not permit royalty-free
redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only
way you could satisfy both it and this License would be
to refrain entirely from distribution of the Program.
not specify a version number of this License, you
may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate parts of the Program into
other free programs whose distribution conditions are
different, write to the author to ask for permission. For
software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting
the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSETHEPROGRAMISLICENSEDFREEOFCHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHENOTHERWISESTATEDINWRITINGTHECOPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU.
SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply and
the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or
to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free
software distribution system, which is implemented
by public license practices. Many people have
made generous contributions to the wide range of
software distributed through that system in reliance
on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to
distribute software through any other system and a
licensee cannot impose that choice.
12. INNOEVENTUNLESSREQUIREDBYAPPLICABLELAWOR
AGREEDTO INWRITINGWILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of this
License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder
who places the Program under this License may add an
explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only
in or among countries not thus excluded. In such case,
this License incorporates the limitation as if written in
the body of this License.
END OF TERMS AND CONDITIONS
END OF SCHEDULE 2
9. The Free Software Foundation may publish revised
and/or new versions of the General Public License
from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to
address new problems or concerns.
Schedule 3
If this Linksys product contains open source software
licensedunderVersion2.1ofthe“GNULesserGeneralPublic
License” then the license terms below in this Schedule 3
will apply to that open source software. The license terms
below in this Schedule 3 are from the public web site at
Each version is given a distinguishing version number.
If the Program specifies a version number of this
License which applies to it and “any later version”, you
have the option of following the terms and conditions
either of that version or of any later version published
by the Free Software Foundation. If the Program does
.
Network Storage Link for USB 2.0 Disk Drives
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
To protect each distributor, we want to make it very clear
that there is no warranty for the free library. Also, if the
library is modified by someone else and passed on, the
recipients should know that what they have is not the
original version, so that the original author’s reputation
will not be affected by problems that might be introduced
by others.
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
USA
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Finally, software patents pose a constant threat to the
existence of any free program. We wish to make sure
that a company cannot effectively restrict the users of
a free program by obtaining a restrictive license from a
patent holder. Therefore, we insist that any patent license
obtained for a version of the library must be consistent
with the full freedom of use specified in this license.
[This is the first released version of the Lesser GPL. It also
counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
Most GNU software, including some libraries, is covered
by the ordinary GNU General Public License. This license,
the GNU Lesser General Public License, applies to certain
designated libraries, and is quite different from the
ordinary General Public License. We use this license for
certain libraries in order to permit linking those libraries
into non-free programs.
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your
freedom to share and change free software—to make
sure the software is free for all its users.
This license, the Lesser General Public License, applies to
some specially designated software packages—typically
libraries—of the Free Software Foundation and other
authors who decide to use it. You can use it too, but we
suggest you first think carefully about whether this license
or the ordinary General Public License is the better strategy
to use in any particular case, based on the explanations
below.
When a program is linked with a library, whether
statically or using a shared library, the combination of
the two is legally speaking a combined work, a derivative
of the original library. The ordinary General Public
License therefore permits such linking only if the entire
combination fits its criteria of freedom. The Lesser General
Public License permits more lax criteria for linking other
code with the library.
When we speak of free software, we are referring to
freedom of use, not price. Our General Public Licenses
are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this
service if you wish); that you receive source code or can
get it if you want it; that you can change the software and
use pieces of it in new free programs; and that you are
informed that you can do these things.
We call this license the “Lesser” General Public License
because it does Less to protect the user’s freedom than
the ordinary General Public License. It also provides
other free software developers Less of an advantage over
competing non-free programs. These disadvantages are
the reason we use the ordinary General Public License
for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
To protect your rights, we need to make restrictions that
forbid distributors to deny you these rights or to ask you
to surrender these rights. These restrictions translate to
certain responsibilities for you if you distribute copies of
the library or if you modify it.
For example, on rare occasions, there may be a special
need to encourage the widest possible use of a certain
library, so that it becomes a de-facto standard. To achieve
this, non-free programs must be allowed to use the library.
A more frequent case is that a free library does the same
job as widely used non-free libraries. In this case, there is
little to gain by limiting the free library to free software
only, so we use the Lesser General Public License.
For example, if you distribute copies of the library,
whether gratis or for a fee, you must give the recipients
all the rights that we gave you. You must make sure that
they, too, receive or can get the source code. If you link
other code with the library, you must provide complete
object files to the recipients, so that they can relink them
with the library after making changes to the library and
recompiling it. And you must show them these terms so
they know their rights.
In other cases, permission to use a particular library in non-
free programs enables a greater number of people to use
a large body of free software. For example, permission to
use the GNU C Library in non-free programs enables many
more people to use the whole GNU operating system, as
well as its variant, the GNU/Linux operating system.
We protect your rights with a two-step method: (1) we
copyright the library, and (2) we offer you this license,
which gives you legal permission to copy, distribute and/
or modify the library.
Although the Lesser General Public License is Less
protective of the users’ freedom, it does ensure that the
user of a program that is linked with the Library has the
Network Storage Link for USB 2.0 Disk Drives
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
freedom and the wherewithal to run that program using a
modified version of the Library.
1. You may copy and distribute verbatim copies of the
Library’s complete source code as you receive it, in
any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of
this License along with the Library.
The precise terms and conditions for copying, distribution
and modification follow. Pay close attention to the
difference between a “work based on the library” and a
“work that uses the library”. The former contains code
derived from the library, whereas the latter must be
combined with the library in order to run.
You may charge a fee for the physical act of transferring
a copy, and you may at your option offer warranty
protection in exchange for a fee.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
2. You may modify your copy or copies of the Library or
any portion of it, thus forming a work based on the
Library, and copy and distribute such modifications
or work under the terms of Section 1 above, provided
that you also meet all of these conditions:
0. This License Agreement applies to any software library
or other program which contains a notice placed by
the copyright holder or other authorized party saying
it may be distributed under the terms of this Lesser
General Public License (also called“this License”). Each
licensee is addressed as “you”.
a) The modified work must itself be a software
library.
b) You must cause the files modified to carry
prominent notices stating that you changed the
files and the date of any change.
A “library” means a collection of software functions
and/or data prepared so as to be conveniently linked
with application programs (which use some of those
functions and data) to form executables.
c) You must cause the whole of the work to be
licensed at no charge to all third parties under the
terms of this License.
The“Library”, below, refers to any such software library
or work which has been distributed under these terms.
A“work based on the Library”means either the Library
or any derivative work under copyright law: that is to
say, a work containing the Library or a portion of it,
either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter,
translation is included without limitation in the term
“modification”.)
d) IfafacilityinthemodifiedLibraryreferstoafunction
or a table of data to be supplied by an application
program that uses the facility, other than as an
argument passed when the facility is invoked, then
you must make a good faith effort to ensure that,
in the event an application does not supply such
function or table, the facility still operates, and
performs whatever part of its purpose remains
meaningful.
“Source code” for a work means the preferred form of
the work for making modifications to it. For a library,
complete source code means all the source code for
all modules it contains, plus any associated interface
definition files, plus the scripts used to control
compilation and installation of the library.
(For example, a function in a library to compute
square roots has a purpose that is entirely well-
defined independent of the application. Therefore,
Subsection 2d requires that any application-
supplied function or table used by this function
must be optional: if the application does not supply
it, the square root function must still compute
square roots.)
Activities other than copying, distribution and
modification are not covered by this License; they are
outside its scope. The act of running a program using
the Library is not restricted, and output from such a
program is covered only if its contents constitute a
work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is
true depends on what the Library does and what the
program that uses the Library does.
These requirements apply to the modified work as
a whole. If identifiable sections of that work are not
derived from the Library, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distribute
the same sections as part of a whole which is a
work based on the Library, the distribution of the
whole must be on the terms of this License, whose
permissions for other licensees extend to the entire
whole, and thus to each and every part regardless
of who wrote it.
Network Storage Link for USB 2.0 Disk Drives
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
Thus, it is not the intent of this section to claim
When a“work that uses the Library”uses material from
a header file that is part of the Library, the object code
for the work may be a derivative work of the Library
even though the source code is not. Whether this is
true is especially significant if the work can be linked
without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by
law.
rights or contest your rights to work written entirely
by you; rather, the intent is to exercise the right to
control the distribution of derivative or collective
works based on the Library.
In addition, mere aggregation of another work
not based on the Library with the Library (or with
a work based on the Library) on a volume of a
storage or distribution medium does not bring the
other work under the scope of this License.
If such an object file uses only numerical parameters,
data structure layouts and accessors, and small macros
and small inline functions (ten lines or less in length),
then the use of the object file is unrestricted, regardless
of whether it is legally a derivative work. (Executables
containing this object code plus portions of the Library
will still fall under Section 6.)
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a
given copy of the Library. To do this, you must alter all
the notices that refer to this License, so that they refer
to the ordinary GNU General Public License, version
2, instead of to this License. (If a newer version than
version 2 of the ordinary GNU General Public License
has appeared, then you can specify that version
instead if you wish.) Do not make any other change in
these notices.
Otherwise, if the work is a derivative of the Library, you
may distribute the object code for the work under the
terms of Section 6. Any executables containing that
work also fall under Section 6, whether or not they are
linked directly with the Library itself.
Once this change is made in a given copy, it is
irreversible for that copy, so the ordinary GNU General
Public License applies to all subsequent copies and
derivative works made from that copy.
6. As an exception to the Sections above, you may also
combine or link a “work that uses the Library” with the
Library to produce a work containing portions of the
Library, and distribute that work under terms of your
choice, provided that the terms permit modification
of the work for the customer’s own use and reverse
engineering for debugging such modifications.
This option is useful when you wish to copy part of the
code of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion
or derivative of it, under Section 2) in object code or
executable form under the terms of Sections 1 and
2 above provided that you accompany it with the
complete corresponding machine-readable source
code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used
for software interchange.
You must give prominent notice with each copy of
the work that the Library is used in it and that the
Library and its use are covered by this License. You
must supply a copy of this License. If the work during
execution displays copyright notices, you must include
the copyright notice for the Library among them, as
well as a reference directing the user to the copy of this
License. Also, you must do one of these things:
If distribution of object code is made by offering
access to copy from a designated place, then offering
equivalent access to copy the source code from the
same place satisfies the requirement to distribute
the source code, even though third parties are not
compelled to copy the source along with the object
code.
a) Accompany the work with the complete
corresponding machine-readable source code
for the Library including whatever changes were
used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the
complete machine-readable “work that uses the
Library”, as object code and/or source code, so that
the user can modify the Library and then relink
to produce a modified executable containing the
modified Library. (It is understood that the user
who changes the contents of definitions files in the
Library will not necessarily be able to recompile the
application to use the modified definitions.)
5. A program that contains no derivative of any portion
of the Library, but is designed to work with the Library
by being compiled or linked with it, is called a “work
that uses the Library”. Such a work, in isolation, is not
a derivative work of the Library, and therefore falls
outside the scope of this License.
However, linking a “work that uses the Library” with
the Library creates an executable that is a derivative
of the Library (because it contains portions of the
Library), rather than a “work that uses the library”. The
executable is therefore covered by this License. Section
6 states terms for distribution of such executables.
Network Storage Link for USB 2.0 Disk Drives
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
b) Use a suitable shared library mechanism for linking
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided
under this License. Any attempt otherwise to copy,
modify, sublicense, link with, or distribute the Library
is void, and will automatically terminate your rights
under this License. However, parties who have received
copies, or rights, from you under this License will not
have their licenses terminated so long as such parties
remain in full compliance.
with the Library. A suitable mechanism is one that
(1) uses at run time a copy of the library already
present on the user’s computer system, rather than
copying library functions into the executable, and
(2) will operate properly with a modified version of
the library, if the user installs one, as long as the
modified version is interface-compatible with the
version that the work was made with.
9. You are not required to accept this License, since you
have not signed it. However, nothing else grants you
permission to modify or distribute the Library or its
derivative works. These actions are prohibited by law if
you do not accept this License.Therefore, by modifying
or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License
to do so, and all its terms and conditions for copying,
distributing or modifying the Library or works based
on it.
c) Accompany the work with a written offer, valid
for at least three years, to give the same user the
materials specified in Subsection 6a, above, for a
charge no more than the cost of performing this
distribution.
d) If distribution of the work is made by offering access
to copy from a designated place, offer equivalent
access to copy the above specified materials from
the same place.
e) Verify that the user has already received a copy of
these materials or that you have already sent this
user a copy.
10. Each time you redistribute the Library (or any work
based on the Library), the recipient automatically
receives a license from the original licensor to copy,
distribute, link with or modify the Library subject
to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of
the rights granted herein. You are not responsible
for enforcing compliance by third parties with this
License.
For an executable, the required form of the “work that
uses the Library” must include any data and utility
programs needed for reproducing the executable from
it. However, as a special exception, the materials to be
distributed need not include anything that is normally
distributed (in either source or binary form) with the
major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless
that component itself accompanies the executable.
11. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not
limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise)
that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If
you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other
pertinent obligations, then as a consequence you may
not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of
the Library by all those who receive copies directly or
indirectly through you, then the only way you could
satisfy both it and this License would be to refrain
entirely from distribution of the Library.
It may happen that this requirement contradicts the
license restrictions of other proprietary libraries that
do not normally accompany the operating system.
Such a contradiction means you cannot use both
them and the Library together in an executable that
you distribute.
7. You may place library facilities that are a work based
on the Library side-by-side in a single library together
with other library facilities not covered by this License,
and distribute such a combined library, provided that
the separate distribution of the work based on the
Library and of the other library facilities is otherwise
permitted, and provided that you do these two
things:
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply, and
the section as a whole is intended to apply in other
circumstances.
a) Accompany the combined library with a copy of the
same work based on the Library, uncombined with
any other library facilities. This must be distributed
under the terms of the Sections above.
It is not the purpose of this section to induce you to
infringe any patents or other property right claims or
to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free
software distribution system which is implemented
by public license practices. Many people have
made generous contributions to the wide range of
b) Give prominent notice with the combined library of
the fact that part of it is a work based on the Library,
and explaining where to find the accompanying
uncombined form of the same work.
Network Storage Link for USB 2.0 Disk Drives
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
software distributed through that system in reliance
NO WARRANTY
on consistent application of that system; it is up to
the author/donor to decide if he or she is willing to
distribute software through any other system and a
licensee cannot impose that choice.
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHENOTHERWISESTATEDINWRITINGTHECOPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE
LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD
THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of this
License.
12. If the distribution and/or use of the Library is restricted
in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places
the Library under this License may add an explicit
geographical distribution limitation excluding those
countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the
body of this License.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE LIBRARY (INCLUDING
BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY
TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
13. The Free Software Foundation may publish revised
and/or new versions of the Lesser General Public
License from time to time. Such new versions will be
similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number.
If the Library specifies a version number of this License
which applies to it and“any later version”, you have the
option of following the terms and conditions either of
thatversionorofanylaterversionpublishedbytheFree
Software Foundation. If the Library does not specify a
license version number, you may choose any version
ever published by the Free Software Foundation.
END OF TERMS AND CONDITIONS
END OF SCHEDULE 3
14. If you wish to incorporate parts of the Library into
other free programs whose distribution conditions are
incompatible with these, write to the author to ask for
permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of
software generally.
Schedule 4
If this Linksys product contains open source software
licensed under the OpenSSL license:
This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit.
This product includes cryptographic software written by
Eric Young ([email protected]).
This product includes software written by Tim Hudson
In addition, if this Linksys product contains open
source software licensed under the OpenSSL license
then the license terms below in this Schedule 3 will
apply to that open source software. The license terms
below in this Schedule 3 are from the public web site at
The OpenSSL toolkit stays under a dual license, i.e. both
the conditions of the OpenSSL License and the original
SSLeay license apply to the toolkit. See below for the
actual license texts. Actually both licenses are BSD-style
Network Storage Link for USB 2.0 Disk Drives
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
Open Source licenses. In case of any license issues related
to OpenSSL please contact [email protected].
Original SSLeay License
rights reserved.
OpenSSL License
Copyright © 1998-2007 The OpenSSL Project. All rights
reserved.
This package is an SSL implementation written by Eric
Young ([email protected]).
The implementation was written so as to conform with
Netscape’s SSL.
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
This library is free for commercial and non-commercial
use as long as the following conditions are adhered to.
The following conditions apply to all code found in this
distribution, be it the RC4, RSA, lhash, DES, etc., code; not
just the SSL code. The SSL documentation included with
this distribution is covered by the same copyright terms
except that the holder is Tim Hudson (tjh@cryptsoft.
com).
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or
other materials provided with the distribution.
Copyright remains Eric Young’s, and as such any Copyright
notices in the code are not to be removed.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgment: “This product includes software
developed by the OpenSSL Project for use in the
If this package is used in a product, Eric Young should be
given attribution as the author of the parts of the library
used. This can be in the form of a textual message at
program startup or in documentation (online or textual)
provided with the package.
4. The names “OpenSSL Toolkit” and “OpenSSL Project”
must not be used to endorse or promote products
derived from this software without prior written
permission. For written permission, please contact
Redistribution and use in source and binary forms, with
or without modification, are permitted provided that the
following conditions are met:
5. Products derived from this software may not be called
“OpenSSL” nor may “OpenSSL” appear in their names
without prior written permission of the OpenSSL
Project.
1. Redistributions of source code must retain the
copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the
above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or
other materials provided with the distribution.
6. Redistributions of any form whatsoever must retain
the following acknowledgment:“This product includes
software developed by the OpenSSL Project for use in
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgement:
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
“AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
“This product includes cryptographic software written
by Eric Young ([email protected])”
The word ‘cryptographic’ can be left out if the routines
from the library being used are not cryptographic
related.
4. IfyouincludeanyWindowsspecificcode(oraderivative
thereof) from the apps directory (application code)
you must include an acknowledgement:“This product
includes software written by Tim Hudson (tjh@
cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
This product includes cryptographic software written by
Eric Young ([email protected]). This product includes
software written by Tim Hudson ([email protected]).
Network Storage Link for USB 2.0 Disk Drives
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Software License Agreement
Appendix F
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Thelicenseanddistributiontermsforanypubliclyavailable
version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another
distribution license [including the GNU Public License.]
END OF SCHEDULE 4
8111811A-AI
Network Storage Link for USB 2.0 Disk Drives
34
Download from Www.Somanuals.com. All Manuals Search And Download.
|