Model SA8001 User Guide
Super Audio CD Player
CLASS 1 LASER PRODUCT
LUOKAN LASERLAITE
KLASS 1 LASERAPPARAT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
NOTE:
IMPORTANT SAFETY
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses and can radiate radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio communications. How-
ever, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
INSTRUCTIONS
– Reorient or relocate the receiving antenna.
– Increase the separation between the equip-
ment and receiver.
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are,
however, some installation and operation precautions which you should be particularly aware of.
– Connect the equipment into an outlet on a
circuit different from that to which the re-
ceiver is connected.
1. Read these instructions.
2. Keep these instructions.
– Consult the dealer or an experienced radio/
TV technician for help.
3. Heed all warnings.
4. Follow all instructions.
NOTE:Changes or modifications may cause
this unit to fail to comply with Part 15 of the
FCC Rules and may void the user's authority
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacture's instructions.
to operate the equipment.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la Classe B est
conforme á la norme NMB-003 du Canada.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Additional Safety Information!
•
•
•
This product should not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have been adhered to.
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
When the switch is in the OFF position, the apparatus isn’t completely switched-off from the
MAINS.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
FOREWORD
This section must be read before any connection is
made to the mains supply.
FOREWORD ........................................ 1 OPERATION ........................................ 9
EQUIPMENT MAINS WORKING SETTING .. 1
COPYRIGHT ................................................. 1
CONNECTING THE POWER SUPPLY ......... 9
NORMAL PLAYBACK .................................... 9
START SOUND MODE................................ 10
EQUIPMENT MAINS WORKING
SETTING
INTRODUCTION.................................. 2
PRODUCT FEATURES ................................. 2
ABOUT SUPER AUDIO ................................. 2
PLAYING CD-RW DISCS .............................. 2
APPLICABLE DISCS TO THE UNIT.............. 2
PLAYING YOUR FAVORITE TRACKS OF A
DISC ........................................................ 10
Your Marantz product has been prepared to comply
with the household power and safety requirements
that exist in your area.
PLAYING YOUR FAVORITE PARTS OF A
DISC (SEARCH) ...................................... 10
SA8001 can be powered by 120V AC only.
REPEATED DISC PLAY (REPEAT PLAY) ... 10
COPYRIGHT
BEFORE USING .................................. 2
PLAYING TRACKS IN A RANDOM
Recording and playback of any material may require
consent. For further information refer to the following:
NOTES ABOUT THE DISCS ......................... 2
SEQUENCE (RANDOM PLAY) ............... 10
—
—
—
—
Copyright Act 1956
INAPPROPRIATE PLACES FOR INSTALLATION ..
3
PLAYING TRACKS IN A SPECIFIC
Dramatic and Musical Performers Act 1958
Performers Protection Acts 1963 and 1972
Any subsequent statutory enactments and
orders
SEQUENCE (PROGRAM PLAY) ............. 11
PRECAUTIONS ............................................. 3
USING REMOTE CONTROL UNIT ............... 3
LOADING BATTERIES .................................. 3
SEARCHING YOUR FAVORITE TRACKS
(AMS (AUTOMATIC MUSIC SCAN) PLAY) .. 11
QUICK REPLAY .......................................... 11
ABOUT THE TEXT INFORMATION DISPLAY ... 12
TIMER PLAY ................................................ 12
NAMES AND FUNCTIONS ................. 4
FRONT PANEL .............................................. 4
REMOTE CONTROLLER .............................. 5
REAR PANEL ................................................ 6
DISPLAY ........................................................ 7
TROUBLE SHOOTING ...................... 12
SPECIFICATIONS ............................. 13
CONNECTIONS................................... 8
1
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT SUPER AUDIO
Disc Types
Hybrid-layer Disc
CD layer HD layer
Dual-layer Disc
HD layer
INTRODUCTION
Thank you for selecting the Marantz SA8001 Super
Audio CD Player for your Audio system.
This Player incorporates a number of features
designed to enhance the listening of your favorite
audio sources.
Please read these operating instructions carefully.
We recommend that you read the entire user guide
before you attempt to connect or operate the player.
After you have reviewed the contents of this
manual,we suggest that you make all system
connections before you attempt ttêoperate the unit.
BEFORE USING
Single-layer Disc
The Super Audio standard is based on Direct Stream
Digital (DSD) technology. This new direct-stream
digital format comprises a 1-bit system that has a
digital sampling frequency that is 64 times higher
than that of conventional audio CD. The results are
spectacular: a frequency response of over 100k Hz
and a 120 dB dynamic range over the entire audible
spectrum. Mixed with as many of the original
frequencies as possible, the audio information
audible for human ears sounds much more natural.
All audible frequencies are, after all, embedded in
the frequency range as emitted by the sound source.
A better reproduction does not exist! For the first time
your ears will relive reality.
NOTES ABOUT THE DISCS
HD layer
* Handle the discs carefully so as not to scratch
their surfaces.
* Keep the surfaces of the discs clean at all times.
When cleaning the surfaces of discs, always be
sure to use the special cleaner and wipe the
surfaces in the directions shown in the figure below.
And each type may contain two areas of recorded
information.
•
•
High quality stereo area
High quality multi-channel area**
•
•
Single Layer Disc
It can contain both high quality stereo area and
high quality multi-channel area** information.
PRODUCT FEATURES
Dual Layer Disc
This unit can playback the outstanding sound
performance in Super Audio CD. This unit has the
following unique features.
PLAYING CD-RW DISCS
It can contain both high quality stereo area and
high quality multi-channel area** information. And
a double amount of information can be stored on
the disc thanks to the second layer.
•
Do not wipe the surface in
t h e c i r c u m fe r e n t i a l
direction.
•
Wipe the surface
radially from the
center.
This unit can play back the CD-RW (ReWritable)
discs as well as ordinary Audio CD and CD-R
(Recordable) discs.
•
Low-noise low-distortion filter circuit and high-
speed current-feedback-type output amplifier with
the differential input type HDAM.
* Do not attach pieces of paper or stickers to the
label surfaces of the discs.
•
Hybrid Layer Disc
•
The CD-R and CD-RW discs should contain
properly-recorded TOC information so that they
can be played back. In CD recorders, the task of
writing TOC information is referred to as finalizing
the disc. Discs that are not finalized cannot be
properly recognized as an Audio CD and played
back by regular CD players and Super Audio CD
players. For details, please read the instruction
manual provided with a CD recorder.
Not only does this disc contain both high sound
quality stereo area and high sound quality multi-
channel area** information, it also has a CD layer
in the second layer, so it can be played on a CD
player.
•
Text information display function that can display
disc titles, track titles etc. in Super Audio CD.
When a disc has a piece of plastic tape or rental
CD label with paste protruding from the edge or
when a disc still bears traces of sticky tape or
adhesive labels, do not attempt to play it. If such a
disc is played on the CD player, you may find that
you cannot remove it or that some other kind of
malfunctioning may occur.
•
•
CD-R/CD-RW discs can be played.
Newly Developed Toroidal Transformer
A newly developed Toroidal power transformer,
which produces less vibration and magnetic
leakage flux than previously, has been
incorporated. The materials and manufacturing
process of the ring-shaped core are strictly
controlled to reduce vibration, while the short-ring
attached to the perimeter of the transformer
reduce magnetic leakage flux.
Hybrid Super Audio
CD Disc
* TOC stands for Table Of Contents and contains
information such as the total number of tracks
and total playing time of the disc.
1
CD layer that plays on any of your
existing CD players
High-Density layer containing:
- High sound quality stereo
High sound quality multi-channel**
•
•
This unit can play only the discs recorded in the
CD-DA format designed for music reproduction.
Do not attempt to play a disc containing other
data, such as a CD-ROM for PCs, on this unit.
2
3
-
•
•
Large Capacitance Block Capacitor
A large capacity 3300µF block capacitor is
incorporated into the power supply circuit.
* Do not use discs which come in special shapes.
Do not attempt to play heart-shaped or octagonal
discs or discs with any other special shapes. You
may find that you cannot remove them or that some
other kind of malfunctioning may occur in the player.
As the playback of a CD-RW disc necessitates
partial change of the player setup, it may take
longer time for reading the TOC information than
when an Audio CD or CD-R disc is played.
The number of tracks recorded may vary per layer. It
will be shown on the display window of the unit.
Film capacitors and electrolical capacitors etc.
The capacitors used in high end models are
incorporated into the SA8001 Super Audio CD
player.
** This unit is a stereo-only player, and so it cannot
play high-quality multi-channel audio areas. (It
does not recognize multi-channel areas.)
APPLICABLE DISCS TO THE UNIT
•
•
Copper-coated Chassis
High Grade Audio Output Terminal
1. Super Audio CD
2. Audio CD (CDDA)
* Use discs which satisfy the CD standards such
as those with the “CD logo” or “
their disc label surfaces.
No guarantees are made for playback if discs which
do not satisfy the appropriate CD standards are
used.
Similarly, no guarantees are made for their sound
quality even if it is possible to play such discs.
” mark on
There are three types of Super Audio CDs.
Audio CDs contain music tracks only.
•
•
•
Single-layer Disc
Dual-layer Disc
Hybrid-layer Disc
2
Download from Www.Somanuals.com. All Manuals Search And Download.
* To protect your discs from damage, avoid
placing them in the following locations.
• Where they will be exposed to direct sunlight or
where they will be close to a heater or other heat-
radiating appliance
• Where the humidity level is high or it is very dusty
• Near a window or other such location where they
may be exposed to rain
w Insert the batteries with correct +/– orientation.
7 Do not place objects on top
USING REMOTE CONTROL UNIT
Two AAA-size batteries
•
Refrain from placing any objects on top of the
player.
Cautions on handling batteries
Misuse of the batteries can result in electrolyte
leakage, rupturing, corrosion, etc.
Bear in mind the following points when using
batteries.
7 Cautions on handling power cord
•
•
Do not touch the power cord with wet hands.
* Get into the habit of putting the discs back in
their cases after use.
• Remove the batteries from the remote control
unit if the unit is not going to be used for a
prolonged period (a month or more).
When disconnecting the power cord, always make
sure that you take hold of the plug. Yanking out
or bending the cord can damage it and/or cause
electric shocks or a fire.
INAPPROPRIATE PLACES FOR
INSTALLATION
• Do not use an old battery together with a new
one.
•
Get into the habit of disconnecting the power plug
before leaving home.
To keep your player in perfect working order for the
longest possible time, avoid installing the player in
the following locations.
• Insert the batteries while ensuring that their
and
poles are properly aligned with
e Close the battery cover until it clicks shut.
the corresponding markings on the remote
control unit.
7 Do not attempt repairs yourself
•
•
Wherever it will be exposed to direct sunlight
• Batteries with the same shape may have
different voltages. Do not use different types
of batteries together.
Wherever it will be close to a heater or other heat-
radiating appliance
•
Refrain from lubricating the player: doing so can
cause malfunctioning.
•
•
•
•
Wherever the humidity is high or ventilation is poor
Wherever it is very dusty
•
Only qualified engineers with specialized
expertise are authorized to repair the pick-up and
parts inside the player.
• If electrolyte has leaked, thoroughly wipe the
inside of the battery compartment, and then
insert new batteries.
Wherever it will be subject to vibration
On top of a rickety stand or in an unstable location
which is tilted at an angle
• When batteries which are no longer required
are to be discarded, follow the directions
(regulations) laid down by the local authorities
in the area concerned for their disposal.
PRECAUTIONS
•
In an audio rack with little space at the top and
bottom or other location where the heat
dissipation will be obstructed
•
In winter, droplets of water form on the insides of
the windows of a heated room: this is called
condensation. This player uses an optical lens,
so the condensation may form in the following
cases.
To ensure proper heat dissipation, install the
player while leaving clearances between the
player and wall or other components, as shown
in the figure below.
7 Remote control
-
In a room immediately after the heating has
been turned on
Operate the remote control unit (RC8001SA) within
a distance of approx. 5 m from the infrared signal
reception window (remote sensor) on the front of the
Super Audio CD player.
Remote control operation may not be possible if the
remote control unit’s transmitter is not pointing in the
direction of the remote sensor or if there is an
obstruction between the transmitter and the remote
sensor.
LOADING BATTERIES
•
On top of an amplifier or other component which
dissipates a great deal of heat
-
-
In a room where the humidity level is high
When the player has been suddenly brought
from a cold location into a warm room
Batteries in this remote control unit have a life of
approximately 1 year under normal operating
conditions. If the remote control unit is not going to
be used for an extended period of time, remove the
batteries. Also, if you notice that the batteries are
starting to run down, replace them as soon as
possible.
* The quality of the laser and other components
can be harmed if the player is placed directly
on top of an amplifier or other device which
generates heat.
Since, in cases like this, the track numbers may
not be read and the player is prevented from
operating properly, wait about 30 minutes, and
then operate the player.
Above 4 ins. (0.1 m) or
more
•
•
This player may cause interference on a tuner or
TV set. If this is the case, place it further away
from the tuner or TV set.
Left 4 ins. (0.1 m) or
more
Remote control operating range
Right 4 ins. (0.1 m) or
more
q Remove the battery cover.
SUPER AUDIO CD PLAYER SA8001
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
1
TOTAL
REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
STEREO
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
POWER ON/OFF
Compact discs have much less noise than analog
records and hardly any noise is heard before play
starts. Bear in mind, therefore, that if the volume
control on the amplifier is set too high, you will
risk damaging other audio components.
Approx.
16.4 ft. (5m)
Rear 4 ins. (0.1 m)
or more
•
•
This player is designed to play Super Audio CD
and normal Audio CDs only. It cannot play CD-
ROMs used with personal computers, game CDs,
video CDs or DVDs (video/audio).
We do not recommend the use of lens cleaners.
Remote control unit (RC8001SA)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES AND FUNCTIONS
FRONT PANEL
c
v
⁄ . , m
SUPER AUDIO CD PLAYER SA8001
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
1
TOTAL
REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
TIME
STEREO
DISPLAY OFF
TEXT
SOUND MODE
POWER ON/OFF
z
x ¤⁄ ⁄ ⁄ b
⁄n⁄
z POWER ON/OFF switch
n
,
,
STOP button
Press this button to stop playback. Also this
button is used to clear all programs.
⁄
⁄
button
DISPLAY
This button is used to turn lighting ON and OFF
of the display window.
Pressing this button once darkens the display.
The third time this button is pressed, the display
will be extinguished and the indicator in ¤lights.
This switch is used to turn the power ON and
OFF. When it is pressed, the display window
lights up, and the power comes on. When it is
pressed again, the display window is
extinguished, and the power goes off.
(Track Skip/Search buttons)
These buttons can be used as both track skip
and track search buttons. (The buttons on the
main unit only.)
.
⁄
PLAY button
Press this button to start playback.
: Each time this button is pressed, the
track being played is skipped
forward. When this button is held
down, tracks are searched forward
(Fast Forward).
: When this button is pressed, the unit
goes back to the beginning of the
current track. If the button is pressed
more times, the track being played
is skipped back. When this button is
held down, tracks are searched
backward (Fast Rewind).
x Disc tray
button
TIME
OPEN/CLOSE
button
The disc to be played is placed on the tray.
This button is used to switch from the text display
to the time display when using a text-compatible
Super Audio CD. It is also used to change the
time display. Each time that it is pressed, the
displayed time cycles from track elapsed time
→ track remaining time → total remaining time
→ track elapsed time . (See page 9)
Press this button to open the tray. Put on a disc
label side up. Press the button again to close
the tray.
* Close the tray by pressing the operation button,
not by pressing it in with your hand.
c Remote sensor
⁄ PHONES (headphones)jack
The headphones are connected to this jack.
* Use headphones with a standard plug.
The infrared control signal emitted from the
remote control unit are sensed here.
In program play, Fast Forward and Fast Rewind
can be done in the playing track only.
⁄
button
TEXT
v Display window
This button is pressed to switch the main screen
from the time display to the text display when
using a text-compatible Super Audio CD. (See
page 12)
⁄ LEVEL (headphone volume) control
This screen shows the operating status.
This control is used to adjust the headphone
volume.
Turn it clockwise to increase the headphone
volume.
m
PAUSE button
Press this button to pause playback. If pressed
again, the unit returns to playback.
SOUND MODE
b
button
Press this button to select the Super Audio CD
sound mode. Super Audio CD (stereo) or Audio
CD (if discs are supported) (See page 9)
¤ DISPLAY OFF indicator
This indicator turns on when the display screen
is turned off (Off mode).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND MODE
SCROLL/RECALL
b
m
,
.
⁄
⁄
⁄
⁄
button
¤
button
¤
¤
‹
,
button
REMOTE CONTROLLER
Use this button to scroll text while displaying text
information in a Super Audio CD disc that
supports TEXT.
This button is also used for checking the
programmed tracks during a program or when a
program is stopped. (See page 11)
These buttons can switch between devices
compatible with Marantz receivers. Refer to the
receiver instruction manual for further details.
PAUSE button
STOP button
OPEN/
CLOSE
SOUND
MODE
PLAY button
,
button
b
⁄
These buttons can adjust the volume of devices
compatible with Marantz receivers. Refer to the
receiver instruction manual for further details.
OPEN/CLOSE button
¤
¤
¤
CANCEL
¤
¤
button
button
DISPLAY
AMS
A - B
RANDOM
Use this button to cancel a programmed track.
(See page 11)
¤
⁄
button
TIME
TEXT
SCROLL/
RECALL
PROGRAM
CANCEL
TEXT
MUTE
button
This button can activate the mute function of
devices compatible with Marantz receivers. Refer
to the receiver instructions for further details.
¤
button
A-B
(A-B Repeat button)
DISPLAY
TIME
⁄
⁄
⁄
The buttons listed above are the same to the
buttons on the front panel of the main unit.
Please see the correspond items in “Front Panel”
section.
This button is to determine starting and ending
points for A-B repeat play. (See page 10)
RANDOM
¤
¤
button
This button is for random play. (See page 10)
INPUT
MUTE
VOLUME
Q.REPLAY
¤
¤
⁄
⁄
⁄
-
(Numerical buttons)
0
9
Use these buttons to select tracks directory.
AMS
button)
(Automatic Music Scan
‹
¤
m
REPEAT
¤
.
PROGRAM button
This button is for program play. (See page 11)
Use this button for AMS play. (See page 11)
REPEAT
¤
button
,
(Track skip buttons)
⁄
⁄
⁄
This button is for repeat play. Each time this
button is pressed, repeat mode changes as
follows.“All Repeat”→ “Track Repeat”→ “Repeat
Off” (See page 10)
,
: When this button is pressed, the unit goes
back to the beginning of the current track.
If the button is pressed more times, the
track being played is skipped back.
1
4
2
5
8
0
3
6
: Each time this button is pressed, the track
being played is skipped forward.
MENU
button and
(Menu setup)
These buttons are used to set the time for quick
replay. (See page 11)
ENTER
button
¤
¤
* Search buttons are provided separately for the
remote control unit. Use ⁄ Search buttons for
search function.
7
9
MENU
ENTER
¤
⁄
,
(Search buttons)
Q.REPLAY (Quick replay) button
This button is used to do quick replay of the
tracks. (See page 11)
: While this button is pressed during
playback, tracks are searched backward.
: While this button is pressed during
playback, tracks are searched forward.
REMOTE CONTROLLER
RC8001SA
* In this instruction manual, some operations can only be performed with the remote control. For operations that can be performed with buttons both on the
main unit and on the remote control, the button names are shown in the
remote control, the button names are shown in the mark.
mark. And for operations that can only be performed with buttons on the
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REAR PANEL
F
ANALOG OUTPUT
L
R
AC IN
DIGITAL AUDIO OUT
OPT. COAX.
REMOTE CONTROL
IN
EXT.
INT.
OUT
A
B C D
E
A
ANALOG OUTPUT connectors
D REMOTE CONTROL IN, OUT (input F AC POWER INPUT JACK
These are the output jacks of the analog audio
signals.The supplied analog connection cord can
be connected to the CD, AUX, or other
connectors on an amplifier. Be sure to connect
the L and R channels correctly to the
corresponding jacks.
and output) connectors
Connect the supplied power cord to this jack and
a household AC power outlet.
When the remote control connectors on the
player and on a Marantz AV component are
connected using the accessory remote control
connecting cables, the components can be
operated as a system by remote control.
* Never connect to the PHONO connector on the
amplifier.
• When connecting to a component which is
equipped with remote control connectors, the
player’s REMOTE CONTROL IN connector
must always be connected to the REMOTE
CONTROL OUT connector on the other
component to be connected.
• When connecting a component which is not
equipped with an infrared remote sensor, this
component must always be connected to the
player’s REMOTE CONTROL OUT connector.
B DIGITAL AUDIO OUT OPT.
It outputs the playing Audio CD signal in digital
format. This jack is to be connected with a
recording device, amplifier, D/A converter, etc
that has optical digital input using an optional
square type optical digital cable.
* No signal will be output when a Super Audio
CD is played.
E EXT./INT. (Ext./Internal switch)
When this unit is used as a standalone
component, set this switch to the INT. side.When
it is used connected to external component by a
remote connecting cable and to audio
component with a remote sensor that supports
remote controls by Marantz, set this switch to
the EXT. side.
C DIGITAL AUDIO OUT COAX.
It outputs the playing Audio CD signal in digital
format. This jack is to be connected with a
recording device, amplifier, D/A converter, etc
that has coaxial digital input using an optional
coaxial digital cable.
* If the unit is used as standalone and the
switch is set to EXT. position, remote control
unit cannot be used.
* No signal will be output when a Super Audio
CD is played.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
c d ef g
hi jk l m
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
1
TOTAL
REMAIN
SACD
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
a
b
a Main display
g
, ALL, 1 (repeat) indicator
The time display and text information of the disc
to be played as well as the setting menus and
other displays appear on the main display.
This lights during repeat play.
h TOTAL (total time) indicator
When the total remaining time or the total
program time is displayed, this lights above the
display.
b 1-20,
(music calendar)
The number of tracks recorded on the disc to be
played, the number of remaining tracks to be
played, and the number of tracks programmed
by program play appear here. “ ” light when
21 or more tracks have been recorded on the
disc.
i AMS (auto music search) indicator
This lights during AMS playback.
j SING indicator
c RNDM (random) indicator
This lights when the remaining time of the track
now playing is displayed.
This lights during random play.
d PROG (program) indicator
k 8 (pause) indicator
This lights during program play.
This lights when play is paused (temporarily
stopped).
e TRK (track) indicator
l 3 (play) indicator
This lights above the display of the track number
now playing, for instance.
This lights during disc play.
f A-B (A-B repeat) indicator
m CD, SACD, STEREO Disc indicator
This lights during A-B repeat play.
This indicates the type of disc on the disc tray.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Depending on your amplifier/receiver/Stereo System, there are various ways to connect to this player. For
correct connection please refer to instruction manuals of stereo system to be connected.
Caution: Do not connect output from this unit to PHONO input of your audio system.
1. Connect the audio cable q to this unit’s front speaker outputs and the stereo inputs on your amplifier,
receiver or stereo system.
2. Connect the optical cable w, coaxial cable eto the digital input on your AV amplifier, D/A converter, CD-
R, etc..
* Signal will be output from the digital audio out jacks (OPT./COAX.) only when an Audio CD disc is played.
No signal is output when playing a Super Audio CD.
To Analog Audio output
(white)
(red)
ANALOG OUTPUT
L
R
AC IN
DIGITAL AUDIO OUT
REMOTE CONTROL
OPT. COAX.
IN
EXT.
INT.
OUT
To Digital Audio
output
e
(Optional)
w
(Optional)
Audio cable q
(Supplied)
To audio input
terminals on amplifier
Connect to digital input
INTEGRATED AMPLIFIER
INPUT SELECTOR
VOLUME
terminals of receiver, D/A
converter or CD recorder,
etc..
PHONO
CD
TUNER
AUX/DVD
1
RECORDER
2
MUTE
STANDBY
REC SELECTOR
OFF
BASS
TREBLE
BALANCE
MIN
SPEAKERS
MAX
1
2
SOURCE DIRECT
TUNER
AUX/DVD
CD
POWER ON/OFF
PHONES
PHONO
ON
OFF
ON
OFF
RECORDER
2
1
COPY
RECORRDER2
1
2
+
+
-
-
L
R
Left
Right
speaker speaker
8
Download from Www.Somanuals.com. All Manuals Search And Download.
To start playback form the first track
Press
PLAY button.
7 Switching Sound Mode
OPERATION
(Super Audio CD)
To stop playback
STOP
SUPER AUDIO CD PLAYER SA8001
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
Press
button.
* In this instruction manual, some operations can only be performed with the remote control. For
operations that can be performed with buttons both on the main unit and on the remote control, the
1
TOTAL
REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
POWER ON/OFF
button names are shown in the
buttons on the remote control, the button names are shown in the
mark. And for operations that can only be performed with
To eject disc
Press
OPEN/CLOSE button to open the disc tray
mark.
and take the disc off. Press the button again to close
the tray.
SOUND MODE
Button
Disc tray must be closed when the unit is not be
used.
CONNECTING THE POWER
SUPPLY
q Press POWER switch to turn on.
Display
SOUND MODE
q Press
button in stop
To pause playback
1 Plug the power cable into AC IN jack on the back
mode (not playing).
Press
PAUSE button.
panel.
The currently selected layer or area is shown on
the display. (CD or Super Audio CD)
PAUSE indicator will light and playback is paused at
the point that the button is pressed. To restart
SOUND MODE
If
button is pressed again, a
playback, press
button.
PAUSE button again or press
playable layer or area will be shown, and the layer
or area will be switched to new one.
PLAY
The display cycles from TOC Reading → No
Disc (when no disc is loaded) → Super Audio
CD (when the start sound mode setting is Super
Audio CD).
* When layer or area is switched, TOC will be
read again.
To change time display
TIME
AC IN
Press the
Each time
button on the remote control.
* The sound mode cannot be changed for Audio
CDs and discs with only a Super Audio CD
area.
TIME
button is pressed, display will
change in the following order. “Track elapsed time”
→ “Track remaining time” → “Total remaining time”
→ “Track elapsed time”.
w Press the
OPEN/CLOSE button
* The sound mode on hybrid layer discs will be
changed in the following order.
The disc tray comes out. Place the disc with label
side up on the tray.
Super Audio CD stereo area → CD layer →
Super Audio CD stereo area
To play a single (8cm) CD, place the disc with
the indentation at the center of the tray.
•
Track remaining time
(The remaining playing time from the playing
point to the end of the current track)
* Sound mode can be selected while the tray is
open. Select a desired layer or area and press
2 Turn on the power switch of the audio unit
(amplifier, etc.) that is connected with this unit.
Set the selector on the connected unit to this unit.
e Press
r Press
OPEN/CLOSE button.
button then the tray will close and
PLAY
“SING REMAIN” is displayed
“–” is displayed
playback will be started.
PLAY button.
3 Plug the power cable into an AC outlet.
Disc type is automatically detected and playback
is started. Track number and track elapsed
time(minute, second) appear on the display.
SOUND MODE
w Press the
button
RNDM TRK
PROG
A
ALL
–
B
AMS
1
TOTAL SING REMAIN
SACD
during playback.
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
The currently selected layer or area is shown on
the display. (CD or Super Audio CD)
* For Super Audio CD/CD hybrid-layer discs (See
page 2), the layer that is set in the start sound
mode (See page 10) is played. To change the
layer, use the
9)
NORMAL PLAYBACK
SOUND MODE
If
button is pressed again, the
•
Total remaining time
SOUND MODE
playback is stopped, and the layer or area will
be switched to new one.
When you want to listen at that area, press
button. (See page
7 Super Audio CD player playback
(The remaining playing time from the playing
point to the end of the last track)
button again. The playback will be
(Exp.:Track 6, Elapsed time 2 min 8 sec)
PLAY
started.
“TOTAL REMAIN”
is displayed
SUPER AUDIO CD PLAYER SA8001
Number of current track Minutes Seconds
“–” is displayed
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
1
TOTAL
REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
RNDM TRK
PROG
A
ALL
–
B
AMS
1
TOTAL SING REMAIN
SACD
RNDM TRK
PROG
A
ALL
–
B
AMS
POWER ON/OFF
1
TOTAL SING REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
Remaining track numbers
TIME
* If
button is pressed when Super Audio CD
q
w, e r
disc that supports text is in use, time display is given
priority and the text information will not be displayed
until the next track.To see the text information, press
Playback automatically stops at the end of the
final track.
TEXT
button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
START SOUND MODE
PLAYINGYOUR FAVORITE
TRACKS OF A DISC
REPEATED DISC PLAY
(REPEAT PLAY)
PLAYING TRACKS IN A RANDOM
SEQUENCE (RANDOM PLAY)
When a Super Audio CD hybrid layer discs that has
both a Super Audio CD high sound quality stereo
area and an Audio CD area information are to be
played, this player makes it possible to set the layer/
area (Super Audio CD or Audio CD) to be
preferentially played.
When
in stop mode, and then
button on the remote is pressed
RANDOM
7 Specify track number to play
7 All track repeat
button is pressed,
PLAY
(Direct Search)
the unit shuffles track order automatically and plays
all the tracks in the shuffled order. The RNDM
(random) indicator lights.
When
button on the remote is pressed,
REPEAT
“
” “ALL” indicator will light up and all track repeat
play begins.
Specify track number with numerical buttons (0-9)
on the remote
This setting can be made when the tray is closed
and there is no disc in the disc tray.
•
The gap between tracks will be approximately 2
seconds during random play.
(example)
To Return to Normal Play
SOUND MODE
q Press
button on the player.
3
1
3rd track : Press
12th track : Press
.
Press
button two times. “ ” “ALL”
REPEAT
The currently selected layer/area is displayed.
If the Super Audio CD is selected
If the Audio CD is selected
and then press
2
indicator will disappear, repeat mode will be off and
it returns to normal play mode.
To Exit from Random Play and Return to Normal Play
STOP
:
Super Audio CD
(within approximately 1.5
seconds).
If the first pressed number is only in the digit of ones
and not in the digit of tens, search begins
approximately 0.5 second after.
Press the
button, and then press the
: CD
RANDOM button while playback is stopped.
The RNDM (random) indicator goes off, and random
play is released.
REPEAT
* If
button is pressed when in program
SOUND MODE
w Press the
button again to display
mode, programmed tracks are played repeatedly.
the layer/area to be played first, and then leave
the setting for at least two seconds to register the
setting for the start sound mode.
7 One Track Repeat
If
buttons on the main unit or
button
If a wrong number is pressed
Press correct number again.
Press
button on the remote two times.
REPEAT
Caution
on the remote are Pressed during Random Play
It jumps to the next track of the shuffled order.
“
”, “1” indicators will light and the track will be
* Start sound mode has a memory retention function
where the settings remain stored and unchanged
even when the disc is changed or the power is
turned off.
played repeatedly.
* If you specify a track number that doesn’t exist on
the disc, the indicator returns to the display shown
prior to this operation.Please specify a correct track.
If
,
buttons on the main unit or
To Exit from One Track Repeat
,
buttons on the remote are Pressed during
Press
button. “ ” “1” indicator will
REPEAT
* At the time of shipment, the sound mode is set to
Super Audio CD.
Random Play
Search will be done only in the current track. Search
does not go to the previous or next track.
disappear, repeat mode will be off and it returns to
normal play mode.
7 Skipping to the previous or next
track (Track Skip)
7 A-B Repeat
To listen to a track posterior to the current track
To Listen to Random Play Repeatedly
Press
buttons on the main unit or
Press
button on the remote once during
A–B
REPEAT
q Press
button on the remote at your chosen
button on the remote the number of times you want
to proceed tracks.
random play. Every time the order will be shuffled.
If button is pressed during program
play, the programmed tracks will be shuffled.
starting point. The “A-B” indicator will blink.
•
RANDOM
A–B
w
Press
button again at your chosen end
point. “A-B” “ ” indicator will light up and the
chosen section will be played repeatedly.
To listen to a track prior to the current track
Press
buttons on the main unit or
button on the remote go back to the beginning of the
current track. Then press buttons on the
main unit or button on the remote the number
To Exit from A-B Repeat
A–B
indicator will disappear, A-B repeat mode will be off
and it returns to normal play mode.
Press
button on the remote. “A-B” “
”
of times you want to go back.
* A-B repeat cannot be done when random play is
going on.
PLAYINGYOUR FAVORITE
PARTS OF A DISC (SEARCH)
* The end point (where “A-B” indicator is blinks) of
the repeat section cannot be set before the time of
the starting point (where “A-B” “ ” indicator light
up) of the repeat section.
If
,
buttons on the main unit or
buttons on the remote are kept pressing
,
during playback, track search begins. Release the
button when the point you want to listen to gets close.
* No sound is output during the search operation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To Check the Programmed Tracks
SCROLL/RECALL
QUICK REPLAY
PLAYING TRACKS IN A SPECIFIC
SEQUENCE (PROGRAM PLAY)
Press the
button on the remote
Q&A
Q.REPLAY
control during the program or when the program is
When
button is pressed during
stopped (“PROG” lights up).
playback, the unit goes back to the amount of time
set by the MENU and starts playback from there.
You can arrange and play tracks in a specific
sequence. Up to 30 tracks to be played can be
programmed.
•
•
How many tracks can be programmed?
Up to 30 tracks can be programmed for
program play.
SCROLL/RECALL
Every time press
button, the
programmed tracks will be displayed one after the
other in order.
* Playback that goes beyond the track is not allowed.
Also, when the total time of the track being played
is shorter than the time set for quick replay, or when
the playback time is shorter than the time set for
(Example:To program the 7th track after 15th
track in a disc with 25 tracks)
Can I listen to program play repeatedly?
To Delete a Programmed Track
Press
button once. “ ” “ALL”
REPEAT
Q.REPLAY
quick replay, if
button is pressed, the
q
Press
button in stop mode when program
CANCEL
indicator will light and program play will
be repeated.
RNDM TRK
PROG
A
ALL
–
B
AMS
track will be goes back to the start of that track and
playback is started from there.
has been made (When “PROG” indicator is
lighting up).
1
TOTAL SING REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
•
Can I shuffle the programmed track order?
w
Every time press
tracks are deleted in order from the last track
programmed.
Also, the deleted track’s track number indicator
will disappear.
button, the programmed
To Set Quick Replay Time
q If a disc is loaded in the disc tray, eject the disc
CANCEL
Press
button in stop mode.
RANDOM
PROGRAM
q Press
button on the remote in stop
mode. “PROG” indicator will light up and it goes
to program mode.
and close the tray.
w Press the
button on the remote control.
MENU
Lights up
RNDM TRK
PROG
A
ALL
–
B
AMS
SEARCHING YOUR FAVORITE
TRACKS (AMS (AUTOMATIC MUSIC
SCAN) PLAY)
To Clear Whole Program
1
TOTAL SING REMAIN
SACD
Press
STOP button two times while in program
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
play. In the stop mode, press
STOP button once.
Program can also be cleared by pressing
key to open the disc tray.
w Choose a track to be programmed with numeric
OPEN/CLOSE
This feature is convenient to search where your
favorite track is.
ENTER
e Press the
button on the remote control
buttons on the remote.
while Quick Replay is displayed (approx. 3
seconds).The current time setting appears on the
display. (The default setting is 10 seconds.)
If AMS button on the remote is pressed in stop
mode, the PLAY “3” indicator will blink and the
beginnings of all the tracks will be played for 10
seconds each starting from the first track.
Also, if the AMS button is pressed during playback,
the PLAY indicator “3” will blink, and the program
will jump to the next track after a display time of
approximately 10 seconds.
To Add Tracks to Program
(Example: The 15th track is chosen and it’s
Tracks can be added to the end of program when
program is remaining (“PROG” indicator is lighting
up) and in stop mode.
length is 4min30sec)
Lights up
However tracks cannot be added to the program
when the RNDM (random) indicator is lighting up.
RNDM TRK
PROG
A
ALL
–
B
AMS
1
TOTAL SING REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
* Please be careful about the following matters.
r Use the
or
button to set the time. (10
Light up
seconds/20 seconds/30 seconds)
1st track programmed
Only the numbers of
programmed tracks light up
•
When programming 1st through 9th tracks in a
disc that has over 10 tracks by using numeric
buttons. For instance, programming the 3rd track
after programming the 1st track, press 3 button
more than approximately 1.5 seconds after 1
button is pressed. When a program is finalized,
the time is updated.
RNDM TRK
PROG
A
ALL
–
B
AMS
1
TOTAL SING REMAIN
SACD
t After making the setting, press the
button
MENU
e With the sequence described in step w above,
program another track. Repeat that sequence to
program all the tracks you want.You can program
up to 30 tracks.
twice. The display returns to the normal display.
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
y The time setting is retained even when the power
When you find a song that you want to listen to, press
PLAY
is turned off.
the AMS button again or press the
button.
PLAY indicator will light up constantly and normal
playback will begin from the current track.
(Example:The 7th track is chosen and total
length of 7th and 15th is 7min50sec)
•
•
Likewise, when programming a track at 10th or
after. For example, to program 13th track, press
3 button within approximately 1.5 seconds after
1 button is pressed.
Caution:
* When there is no key input for about 4 seconds
during this series of operations, the setting will be
configured to the conditions at that time and the
display will return the time display.
* If the AMS button is pressed after the tracks are
programmed, only the programmed tracks are
played by AMS.
Lights up
When programming a track in a disc that has less
than 9 tracks. For instance, to program the 5th
track after 4th track has been programmed, press
5 button more than approximately 0.5 second after
4 button is pressed.
RNDM TRK
PROG
A
ALL
–
B
AMS
1
TOTAL SING REMAIN
SACD
TEXT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
STEREO
Total programmed number
Total playing time of
programmed tracks
PLAY
r Press
button to starts playback in
programmed order.
* When 21 or more tracks are programmed,
light up instead of the track number indicator.
will
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER PLAY
ABOUT THE TEXT INFORMATION
DISPLAY
TROUBLE SHOOTING
This unit can perform timer play by cooperating with
your audio timer.
Connect this unit’s power cord to the audio timer’s
power socket and the timer’s power cord to power
outlet.
If you think a malfunction has occurred, first check
the points listed below. The problem is likely to have
been caused by a simple operational error or a
connection problem. If the problem cannot be
corrected even after carrying out the following checks,
consult your dealer or nearest Marantz sales office
or service counter.
•
Remote control operation is not possible.
The following items of text information in Super Audio
1. Is the transmitter of the remote control unit
(RC8001SA) pointed correctly at the remote
sensor on the front of the player (this unit)?
Or is there an obstruction between the transmitter
and the remote sensor?
TEXT
CD discs can be displayed by pressing
on the remote.
button
Nevertheless, which items of information are
recorded depends on discs so some information may
not be displayed. This unit skips unrecorded
information to display.
* For connection to audio timer and it’s operation,
please refer to the instruction manual of your audio
timer.
2. Are the batteries in the remote control unit
exhausted?
•
The disc fails to rotate.
•
During playback
3. Is there another strong light (from a window, etc.)
striking the Super Audio CD player’s remote
sensor?
Audio Timer
1. Is the mains lead plugged in properly?
2. Is the POWER switch ON?
TEXT
When
button is pressed on the remote, “Track
Title” of the currently playing will be displayed.
3. Is the disc placed in the correct position on the
disc tray?
AC IN
•
In Stop Mode
•
A Super Audio CD cannot be played.
TEXT
Each time
button on the remote is pressed,
4. Is the disc placed properly with the label side
facing up?
1. Is the disc scratched, dirty or warped?
text information will be displayed in the following
order.
2. Is the amplifier’s input selector set to digital?
5. Is the disc dirty?
* Digital audio signal will not be output when a Super
Audio CD is played.
6. Is the disc scratched?
7. Is the disc warped?
Time Display
Album Title
Album Artist
3. Is the disc a Super Audio CD multi-channel only
disc? (This unit does not support Super Audio
CD multi-channel.)
•
The disc is rotating but no sound is heard.
Setting method of Timer Play
1. Are the amplifier and speakers connected
properly?
•
A CD-R/CD-RW disc cannot be played.
q Press POWER switch to turn ON the power.
1. Is the disc placed upside down?
2. Is the amplifier switch ON?
2. Is the disc contains properly written TOC?
3. Is the amplifier’s function or selector switch set to
“CD” or “AUX” or such (to whatever you have
connected this unit to)?
w Insert the disc to be played.
3. Is the recorded information in an audio (CD-DA)
format?
* In timer play mode, tracks are played normally.
•
•
This unit can display 12 characters in one time. If
information is longer than 12 characters, the
display will scroll right to left.
4. Is the amplifier’s volume control set at the
e Set the audio timer.
minimum level?
•
A specific CD cannot be played
Copy control CDs (CDs with copy guard) are
special discs that do not comply with current CD
standards. Marantz cannot guarantee the ability
to play such discs on your CD player.
When normal CDs can be played without a
problem and problems occur only when playing
these special discs, it is not a problem with this
unit.
This unit can display only alphabets, numeric
numbers and symbols. Chinese and Japanese
characters cannot be displayed. If information is
in Chinese and Japanese characters, the unit
displays nothing.
•
The disc stops in mid-operation.
The sound drops out or noise is heard.
1. Is the disc dirty?
2. Is the disc scratched?
3. Is the disc warped?
* In the case of a CD-R or CD-RW disc, this problem
may occur when the conditions under which its data
was originally written were substandard or when
the quality of the disc itself is poor.
Please ask the seller of the copy control CD for
detailed information regarding copy control CDs.
•
•
The unit makes a clicking sound when the tray
closes
* This condition may occur in Mixed-Mode CDs, CD
Extra, and other discs that have CDDA format mixed
with other data.
Noise may also be heard momentarily when
skipping tracks.
This is the adhesion click of the clamper for
securing the disc. This does not cause any
problem in using the unit.
While the disc is spinning, a spinning sound
is heard or a slight vibration occur.
Depending on the disc, a spinning sound may
occur or the unit may vibrate slightly due to disc
eccentricity or such. This is not a problem with
this unit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
I Dimensions
SPECIFICATIONS
Super Audio CD
Audio CD
Audio Characteristics
Analog output
Channels
2channels
2Hz — 100kHz
2Hz — 50kHz (-3dB)
112dB
2channels
2Hz — 20kHz
2Hz — 20kHz
100dB
Frequency range
Frequency characteristics
Dynamic range
THD (1kHz)
0.0010%
0.0020%
wow & flutter
Precision of quartz
Precision of quartz
Output level
Unbalanced
2.3V RMS stereo
2.3V RMS stereo
Digital output
output level (cinch JACK)
output level (optical)
—
—
0.5Vp-p (75Ω)
-19dBm
Optical Readout System
Laser
Wave length
AlGaAs
650nm
AlGaAs
780nm
Signal format
1-bit DSD
16-bit linear PCM
13 5/16 (339)
17 5/16 (440)
Sampling frequency
2.8224MHz
44.1kHz
SUPER AUDIO CD PLAYER SA8001
RNDM
PROG
TRK
A
ALL
–
B
AMS
SING
1
TOTAL
REMAIN
SACD
Power Supply
TEXT
1
2
3
4
5
6
7
8
9
10
11
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
2
0
STEREO
D
I
S
P
L
A
Y
O
F
F
T
E
X
T
T
I
M
E
S
O
U
N
D
M
O
D
E
PPOOWWEERR ONN//OOFFFF
U Version....................................................................................................... AC 120V 60Hz
Power Consumption ...................................................................................................... 20W
3/16
(4.5)
Cabinet, etc.
13 3/16 (334.5)
Dimensions (Width × Height × Depth) ................................................... 440 × 128 × 339mm
Net weight .................................................................................................................... 8.0kg
Operating temperatures ................................................................................. +5°C ~ +35°C
Operating humidity ............................................................................ 5 ~ 90% (without dew)
Unit : inch (mm)
Accessories
• Remote control unit (RC8001SA) .................................................................................... 1
• AAA (R03) Batteries......................................................................................................... 2
• AC Power cord ................................................................................................................. 1
• Audio cable ...................................................................................................................... 1
• Remote connection Cable................................................................................................ 1
• User’s Guide .................................................................................................................... 1
• Warranty Card.................................................................................................................. 1
Specifications subject to change without prior notice.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
You can find your nearest authorized distributor or dealer on our website.
U.S.A.
Marantz America, Inc.
Marantz Europe B.V.
1100 Maplewood Drive, Itasca, IL 60143, U.S.A.
EUROPE
P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
Printed in China
02/2006 00M29AK851250 mzh-g
Download from Www.Somanuals.com. All Manuals Search And Download.
|