Wireless LAN - 11
Access Point
Short Manual
Kurzhandbuch
Manuel condensé
English
Deutsch
Français
Estratto del Manuale
Italiano
LINDY Art. Nr. 52020 Version Europe: NOT FOR USE IN France + Spain
LINDY Art. Nr. 52022 Version Française
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (APR 2001)
Download from Www.Somanuals.com. All Manuals Search And Download.
English Short Manual
Rear view of your W-LAN 11 Access Point:
100M TX
Link RX
POWER
MDI
MDI-X
RS-232
OR
Power:
MDI:
MDI-X
Connect the power adaptor here.
RJ-45 connector for Ethernet Hub with10BaseT or 100BaseTX.
RJ-45 connector to connect a computer or workstation, you can only use one of
the MDI / MDI-X marked connectors!
RS-232
Console port to configure and program the Access Point
LED’s
status display for the wired Ethernet
After correct installation of all connections to the wired LAN the Link LED should always light
green when the hub or the workstation/computer is switches on.
The top panel of the W-LAN 11 Access Point
The following table provides an overview of each LED activity:
Description
LED Definition
Activity
PWR
AP
Continuous Green
Continuous Green
Power enabled
The W-LAN 11 is now in service.
Off: No wireless activity
Flashing: Wireless RX/TX activity
Off: No Ethernet traffic activity
WLAN
LAN
Flashing Green
Flashing Green
Flashing: Wired LAN traffic
activity
Off: no station connected to the
Access Point
On: with one or more stations
associated to the W-LAN 11
LINK
Continuous Green
3. Configuration / Installation
The Access Point provides a user friendly configuration utility (Access Point Manager). It is
delivered ready for use with factory default settings for use with standard W-LAN conditions.
Any configuration changes may be made using the Access Point Manager software, by web
browser administration or by console set-up using either the RS-232 console administration or
direct Ethernet Telnet connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
English Short Manual
3.1. Access Point Manager Configuration Utility
The Windows based configuration
program; Access Point Manager
provides easy monitoring, checking and
changing of the Access Point parameters.
Place the enclosed CD or Floppy disk into
the computer you want to use to connect
to the AP. Start the set-up program
setup.exe from the enclosed CD or
diskette and follow the instructions given
there. When finished start the program
Access Point Manager. It will
automatically search and detect all LINDY
Access Points in your network
Double click to any Access Point
Symbol to view or change the
settings of the AP selected. The
Default Password as supplied is
“default”
After having entered the correct password the
program will display the MAC address, the
frequency domain (dependent on the
regulations of the countries where used), the
firmware version, connection statistics, the
upgrade utility page, security, access and
encryption settings, etc.
(For further details on Statistics please refer
to the extensive English reference manual)
If you want to set up a wireless LAN with more
then 1 Access Point and you are not familiar
with the basic knowledge for this kind of
WLAN, please contact your local dealer or the
LINDY support department.
At the moment we are trying to include some
additional information under the category TIPS
& MORE on our LINDY homepage
Download from Www.Somanuals.com. All Manuals Search And Download.
English Short Manual
Configuration
The configuration tool provides four different
modes of operation for the Access Point:
General
Standard AP with Roaming
Inter Building AP (Repeater, PxP)
Station Adapter – Infrastructure (SAI)
Station Adapter Ad-hoc (SAA)
(For further details please refer to the
extensive English reference manual)
IEEE802.11
,ESSID’ depicts the name of the W-LAN you
are installing. If this WLAN is to be accessed
by all possible/potential clients then use the
setting ‘Use Non-Specified ESSID: non-
speci’, respectively the ESSID name "ANY".
If you want to secure your WLAN against
unintentional access you should give a
specified ESSID name to all of the clients
that are able to join your WLAN.
….. ID-settings, channel settings, etc.
Administration (Password)
IP Adress
IP Address, Netmask, Gateway
WEP
WEP (Wireless Encryption Protocol) is the
Encryption standard for Wireless LAN. At the
moment WEP-40 is the recent standard.
Select WEP-40 for IEEE standard compliant
(relative) secure data transfer and make sure
every WLAN client uses the exactly same
key.
(For further details please refer to the extensive
English reference manual)
ACCESS CONTROL
Access Control allows you to create a list of
MAC Addresses for authorised PCMCIA cards.
Access to the W-LAN is possible ONLY for the
clients contained in this list.
Download from Www.Somanuals.com. All Manuals Search And Download.
English Short Manual
3.2. Web Management
Utility
The Access Point also provides a
web browser graphic user interface
With the preset IP-Address
http://192.168.1.1 you will have
access to the Access Point Web
Page. Enter password to continue.
The contents of the following
pages are very similar to the
information already given in the
sections before 3.1. Access
Point Manager Configuration
Program.
(For further details please refer
to the extensive English
reference manual)
3.3. Administration via RS-232 console program or Telnet TCP/IP
The Access Point can also be accessed using the RS-232 console connection (terminal
program) using a Nullmodem cable.
Alternatively a Telnet TCP/IP can be used via the Ethernet connection.
Set up your cable connection and start the terminal program. The configuration options are
almost the same as already mentioned above in the previous chapters.
(For further details please refer to the extensive English reference manual)
Download from Www.Somanuals.com. All Manuals Search And Download.
English Short Manual
4. Troubleshooting
If you have trouble using the W-LAN 11 Wireless LAN Access Point, the starting point to
troubleshoot any problems is by looking at the LED activity on the Access Point. The following
“LED Error Table” is provided to assist you in diagnosing and solving operational problems.
PWR
AP
WLAN LAN
LINK
Description/Action
Steady Normal operation where
Green flickering indicates interface
Continuous Flash Flash
Green
On
Green Green
activity.
-
Continuous
Green
No action required.
Normal operation that indicates
there is no LAN activity.
Off
Off
Off
Off
-
No action required.
Power failure.
Off
Off
Off
Off
Check the power cord.
Check the power supply.
Invalid loader firmware or the
micro-controller is dead.
Return the unit to the vendor
for support.
Off
Off
-
Off
Invalid Access Point firmware.
Upgrade the firmware via
the utility or console mode.
Continuous
Green
Blink Green
-
-
-
Wireless LAN initialisation failure
Check whether the wireless
module has been properly
installed.
Ethernet initialization failure
Return the device to the
vendor for support.
Blink
Green
Blink Green
Blink Green
-
-
Blink
-
Green
If you are still unable to solve the problem by checking the LED activity, the error may be caused by a configuration
mismatch which prevents the W-LAN 11 from establishing a wireless connection with your network. You may check
the following to ensure normal operation of the W-LAN 11.
WEP keys: If data encryption is activated, always remember to set WEP keys exactly the same on
the Access Point as are on the wireless stations.
Access Control: Make sure that the MAC address of your W-LAN 11 is not included in the Access
Control table of other wireless devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
1. Einleitung
Das LINDY W-LAN 11 (Wireless LAN mit 11 Mb/s) bietet eine schnelle und zuverlässige Lösung
für kabellosen Netzwerkzugriff. Es ist kompatibel zum W-LAN Standard IEEE802.11b und
802.11.
Es ist prädestiniert für den Einsatz in historischen Gebäuden, in denen kein Kabelnetzwerke
verlegt werden können, für die Anforderung mobile Einsatzorte innerhalb eines Gebäudes oder
um einen allgemeinen freien Netzwerkzugang (z.B. Internet) in einer gegebenen Umgebung
(Universität, Hotel, etc.) zu schaffen.
Verbindungen können prinzipiell als Peer-to-Peer Verbindung (Ad-Hoc) zwischen zwei
Rechnern mit W-LAN PCMCIA Karte aufgebaut werden, zwischen Access Points (Wireless
Repeater) oder zwischen Access Point und Clients (Infrastruktur, PCMCIA Karte u.ä.). Der
LINDY Access Point beherrscht die Roaming Funktion, so dass mit mehreren Access Points ein
größeres Gebäude abgedeckt werden kann. Die Reichweite ist sehr stark von den
Gebäudegegebenheiten (Abschirmung durch Wände, Träger, etc.) abhängig und kann unter
idealen Bedingungen bis 45m reichen, im allgemeinen liegt die maximale Reichweite bei 15-
25m.
Im Freien kann (ohne besondere Antennen) eine Reichweite von ca. 250m erreicht werden.
Bitte beachten Sie, dass
c) ein W-LAN leicht abgehört werden kann und nur mit aktivierter Verschlüsselung
(WEP) ein gewisses Maß an Sicherheit besteht !
d) ohne aktivierte Zugangsbeschränkung und ohne aktiviertes Passwort sich jeder
Nutzer mit IEEE802.11b W-LAN Karte in das Netzt einloggen kann !
Bitte beachten Sie die Aktivierungshinweise zu diesen Themen weiter hinten im Handbuch.
Kabellose Infrastruktur
In einer kabellosen Infrastruktur fungiert das W-LAN 11 als Bridge. Der Access Point verbindet
die kabellosen Clients untereinander und agiert als Schaltzentrale für jegliche kabellose
Kommunikation. Er sorgt somit für effiziente Verbindungen, da die einzelnen Clients sich
untereinander auch außerhalb ihrer direkten Verbindungsreichweite befinden können.
2. Installation der Hardware
Bevor Sie mit der Installation beginnen, stellen Sie bitte sicher, dass Sie die folgenden Dinge
mit der Lieferung erhalten haben:
Den LINDY W-LAN 11 Access Point
Das Netzteil
Die Installationsdiskette oder –CD
Sollte eines der genannten Teile fehlen, wenden Sie sich bitte an Ihren Fachhändler.
Aufstellung
Der Aufstellungsort für den Access Point sollte möglichst zentral im abzudeckenden
Funkbereich liegen, möglichst mit Abstand zu stark abschirmenden Gebäudeteilen. Der AP
kann aufgestellt oder aufgehängt werden.
Anschluss
Verbinden Sie dem MDI Port mit einem Hub bzw. den MDI-X Port mit einem Rechner bzw. einer
Workstation. Verbinden Sie das Netzteil mit Access Point und Steckdose.
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
Die Rückseite des W-LAN 11 Access Point :
100M TX
Link RX
POWER
MDI
MDI-X
RS-232
OR
Power:
MDI:
MDI-X
Schließen Sie hier das mitgelieferte Netzteil an.
RJ-45 Buchse zum Anschluss an Ethernet Hub mit 10BaseT oder 100BaseTX.
RJ-45 Buchse zum Anschluss an Rechner oder Workstation, es kann nur eine der
beiden MDI / MDI-X Buchsen verwendet werden!
RS-232
LEDs
Konsolen Port zur Konfigurierung / Programmierung des Access Point
Zustandsanzeigen für die Ethernet Kabelverbindung
Nach korrektem Anschluss an das Ethernet muss bei eingeschalteten Rechnern/Hubs
zumindest die Link LED grün leuchten.
Die Oberseite des W-LAN 11 Access Point
Die Bedeutung der LED-Signale auf der Frontplatte des W-LAN 11 Access-Point entnehmen
Sie der folgenden Tabelle:
LED-Bezeichnung
Aktivität
Bedeutung
PWR
AP
Dauerhaft grün Spannungsversorgung korrekt
Dauerhaft grün Access Point für Netzwerkdienste verfügbar
aus: keine RX/TX-Aktivität über Funksignal
Grün flackernd
WLAN
LAN
blinkt: RX/TX-Aktivität Wireless
aus: keine RX/TX-Aktivität über Ethernet
Grün flackernd
blinkt: Ethernet-Kabelseitige RX/TX-Aktivität
aus: keine Station mit dem Access Point verbunden
LINK
Dauerhaft grün
an: verbunden mit einer oder mehreren Stationen
verbunden
3. Inbetriebnahme / Konfiguration
Der Access Point kommt betriebsfertig mit allgemein vordefinierten Einstellungen.
Diese können für die individuellen Belange umkonfiguriert werden unter Verwendung eines
mitgelieferten Konfigurationsprogramms (Access Point Manager), durch Anschluss einer
Konsole und ein Konsolen-Utility oder direkt über das Netz (TCP/IP, Telnet Verbindung).
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
3.1. Access Point Manager Konfigurationsprogramm
Das Windows basierte Konfigurations-
programm Access Point Manager
erlaubt die einfache Konfigurierung aller
Parameter des Access Points.
Legen Sie die CD oder Floppy in den
Rechner mit dem Sie den Access Point
konfigurieren wollen. Starten Sie das
Setup-Programm setup.exe von der
mitgelieferten Diskette oder CD und
folgen Sie den Anweisungen. Nach
Abschluss der Installation starten Sie das
Programm Access Point Manager. Das
Programm wird alle LINDY Access Points
im Netzwerk suchen und anzeigen.
Doppelklicken Sie auf ein Access
Point Symbol um seine
Einstellungen zu sehen bzw. zu
ändern. Das Passwort im
Lieferzustand ist „default“.
Nach Eingabe des korrekten
Passwortes sehen Sie im
Konfigurationsprogramm
die Einstellungen für MAC
Adresse, Frequenz Domain (abhängig vom
Einsatzort), Firmware Stand,
Verbindungsstatistiken,
Konfigurationseinstellungen, Upgrade-Utility,
Zugriffs-Sicherheits-Einstellungen, etc.
Sollten Sie ein Wireless LAN mit mehreren
Access Points aufbauen wollen und nicht
über das spezielle Basiswissen für solche
Funknetze verfügen, so wenden Sie sich bitte
an Ihren Fachhändler oder an den LINDY
Support. Wir bemühen uns, weitere
Informationen auf der LINDY Homepage
unter der Rubrik TIPS zur Verfügung zu
stellen.
Weitergehende Erläuterungen über
Statistics entnehmen Sie bitte dem
ausführlichen Englischen Handbuch.
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
Konfiguration
Das Konfigurationstool ermöglicht
verschiedene Betriebarten für den Access
Point:
General
Standard AP mit Roaming
Inter Building AP (Repeater, PxP)
Station Adapter –Infrastructure (SAI)
Station Adapter Ad-hoc (SAA)
(Details siehe ausführliches Englisches
Handbuch)
IEEE802.11
‚ESSID’ bezeichnet den Namen des von
Ihnen einzurichtenden Netzwerkes. Soll das
WLAN für alle potentiellen Teilnehmer völlig
offen sein, so sollten Sie die Einstellung ‚Use
Non-Specified ESSID: non-speci’, bzw. den
ESSID Namen "ANY" wählen. Wenn Sie ihr
Netz gegen ungewollten Zugang absichern
wollen, so vergeben Sie einen geeigneten bei
allen Teilnehmern gleichen ESSID Namen!
Kanaleinstellungen, etc.: Wählen Sie einen geeigneten Kanal aus der Liste. (Details siehe
ausführliches Englisches Handbuch)
Administration (Passwort)
IP Adress
IP Adresse, Netzmaske, Gateway
WEP
WEP (Wireless Encryption Protocol) ist der
Verschlüsselungsstandard für Wireless LAN. Zur
Zeit bildet WEP-40 den aktuell festgelegten
Standard.
Wählen Sie WEP-40 für zum IEEE Standard
kompatiblen (relativ) sicheren Datentransfer
und stellen Sie sicher, dass alle Teilnehmer
des WLAN den exakt gleichen KEY
verwenden.
(Details siehe ausführliches Englisches
Handbuch)
ACCESS CONTROL
Unter Access Control kann eine Liste mit MAC
Adressen von zugelassenen PCMCIA Karten
erstellt werden, anderen wird der Zugriff auf das
W-LAN nicht ermöglicht.
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
3.2. Web Management
Utility
Der Access Point stellt ebenfalls
eine Browser Seite als graphische
Konfigurationsoberfläche zur
Verfügung.
Nach Eingabe der voreingestellten
IP-Adresse http://192.168.1.1
(Lieferzustand) sehen Sie die
Access Point Web-Seite mit der
Aufforderung zur Eingabe des
Passwortes.
Die Inhalte der Folgeseiten sind
weitestgehend identisch mit den
oben unter 3.1. Access Point
Manager
Konfigurationsprogramm
genannten.
(Details siehe ausführliches
Englisches Handbuch)
3.3. Administration über das Konsolenprogramm bzw. RS-232
Der Access Point kann ebenso über eine RS-232Konsolenverbindung (Terminalprogramm)
administriert werden. Dazu ist serielles Nullmodemkabel (RS-232) zu verwenden.
Alternativ kann eine Telnet TCP/IP Verbindung über das Netzwerk verwendet werden.
Stellen Sie dazu die Kabelverbindung her und starten Sie das Terminalprogramm. Die
Konfigurationsoptionen entsprechen weitestgehend den oben unter 3.1. Access Point Manager
Konfigurationsprogramm genannten.
(Details siehe ausführliches Englisches Handbuch)
Download from Www.Somanuals.com. All Manuals Search And Download.
Deutsches Kurzhandbuch
4. Fehlersuche
Bei Problemen mit dem W-LAN 11 Access Point sollte der Fehler systematisch ausgehend von
den LED Anzeigen auf dem Access Point analysiert werden.
Die folgende Tabelle gibt Hinweise bezugnehmend auf den Zustand der LEDs:
PWR
AP
WLAN LAN
LINK
grün
-
Beschreibung/Massnahme
Normalbetrieb, das Flackern zeigt
Datentransfer an.
Dauerhaft Flackert Flackert
grün
grün
grün
Leuchtet
dauerhaft
grün
Alles OK.
Normalzustand, kein Datentransfer, Netz
ist inaktiv
An
Aus
Aus
-
Alles OK.
Spannungsversorgungsfehler.
Aus
Aus
Aus
Aus
Aus
-
Aus
Aus
Aus
Steckernetzteil und Spannung prüfen
Anschlussstecker am Access Point
prüfen.
Inkorrekte Firmware oder Defekt des
Access Point.
Aus
Rückgabe des Gerätes an den
Lieferanten/Hersteller.
Ungültige Access Point Firmware.
Leuchtet
dauerhaft
grün
Upgrade der Firmware über Access
Point Manager Software oder
Konsolenbetrieb oder Web Page.
Blinkt grün
-
-
-
Wireless LAN Initialisierungsfehler
Blinkt
grün
Blinkt grün
-
-
Prüfen Sie ob die PCMCIA Karte
korrekt installiert ist. Öffnen Sie die
Klappe auf der Unterseite des AP
Ethernet Initialisierungsfehler.
Blinkt
grün
Blinkt grün
-
Rückgabe des Gerätes an den
Lieferanten/Hersteller.
Sollten die genannten Maßnahmen nicht zur Behebung des Problems führen, kann der Fehler möglicherweise auf
eine Inkompatibilität zwischen verschiedenen Konfigurationseinstellungen herrühren. Überprüfen Sie bitte noch
folgendes um den Normalbetrieb zu erreichen:
WEP Sicherheitseinstellungen: Falls Datenverschlüsselung aktiviert ist bedenken Sie bitte, dass die
WEP keys auf allen Clients und Access Points ABSOLUT identisch sein müssen!
Access Control: Falls aktiviert, stellen Sie sicher, dass die MAC Adressen aller Clients in der Access
Control Liste des (der) Access Point(s) eingetragen sind.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
1. Introduction
Le LINDY W-LAN 11 (Réseau sans fil à 11 Mb/s) offre une solution rapide à mettre en place et
efficace pour un réseau professionnel. Ce produit est conforme aux standards
IEEE802.11b et 802.11. et convient particulièrement dans les anciens bâtiments où il est
impossible d’installer un câblage réseau et d’y apporter des modifications par la suite, et dans
les universités, hôpitaux, pour un accès réseau dédié (Internet).
Les connexions sont établies par paire (ex. portable avec carte W-LAN PCMCIA), entre les
points d’accès (Hub sans fil) ou entre le point d’accès et les postes clients (carte PCMCIA ou
similaire). Le point d’accès LINDY possède une fonction de balayage, de ce fait même les plus
grands bâtiments sont couverts par la portée du réseau sans fil.
La transmission maximum entre deux points dépend fortement de l’environnement local, de la
structure du bâtiment, de l’isolation des murs et de la structure métallique des murs et des
planchers du bâtiment. Sous des conditions idéales, la transmission possède une portée de
45m, dans la plupart des cas la portée se situe entre 15 et 25m. Il est possible d’avoir une
portée maximale théorique de 250m dans un environnement libre de toutes perturbations.
Remarques:
e) Un réseau sans fil peut être facilement accédé par des personnes non autorisées.
La seule protection possible est si vous bénéficiez de protections en cryptage!
f) Sans contrôle d’accès activé, toute personne possédant le matériel compatible
avec le réseau sans fil IEEE802.11 pourra accéder au réseau!
Veuillez vous référer à la description détaillée indiquée dans le manuel ultérieurement.
Infrastructure sans fil Wireless
Dans une structure sans fil, le W-LAN 11 joue le rôle de pont. Le point d’accès connecte tous
les clients sans fil ensemble et centralise toutes les communications sans fil.
Ceci peut améliorer l’efficacité des communications car les points wireless ne doivent pas être
l’un à coté de l’autre pour fonctionner.
2. Installation matérielle
Avant de commencer, soyez certain que les éléments suivants figurent dans l’emballage:
Le point d’accès LINDY W-LAN 11
L’adaptateur d’alimentation
Le disque d’installation ou CD
Si quelque chose venait à manquer, contactez votre fournisseur.
Placement du point d’accès
Avant l’installation, choisissez le meilleur emplacement pour votre point d’accès.
L’emplacement doit être de préférence central, autour des points de communications sans fil
du réseau W-LAN. Il doit être placé à distance d’éléments métalliques perturbants du bâtiment.
Le point d’accès peut être placé à plat ou bien vissé sur un mur.
Connexions
Connectez le port MDI du point d’accès à votre Hub Ethernet ou connectez le port MDI-X à un
ordinateur ou une station de travail utilisant un câble droit STP/UTP. Connectez l’adaptateur
d’alimentation au point d’accès puis au secteur.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
Vue arrière de votre point d’accès W-LAN 11:
100M TX
Link RX
POWER
MDI
MDI-X
RS-232
OR
Power:
MDI:
MDI-X
Connectez l’adaptateur d’alimentation ici.
Connecteur RJ-45 pour Hub Ethernet 10BaseT ou 100BaseTX.
Connecteur RJ-45 pour connecter un ordinateur à une station, il n’est possible
d’utiliser que les connecteurs marqués MDI / MDI-X!
Port pour configurer et programmer le point d’accès
Affichage du statut pour le réseau sans fil
RS-232
LED’s
Après une installation correcte de toutes les connexions au réseau sans fil, la LED Link doit
toujours être allumée lors de la mise en route des stations clients et du hub.
Le panneau frontal du point d’accès W-LAN 11
Le tableau suivant indique les activités des LED suivantes:
Description
Définition LED
Activité
PWR
AP
Vert continu
Vert continu
Alimentation activée
Le point d’accès est en service.
Eteint: pas d’activité sans fil
WLAN
LAN
Vert clignotant
Vert clignotant
Clignotant: activité sans fil
RX/TX
Eteint: pas de trafic Ethernet
Clignotant: activité du réseau
sans fil
Eteint: pas de station connectée
au point d’accès
Allumé: une ou plusieurs stations
connectées au point d’accès
LINK
Vert continu
3. Configuration / Installation
Le point d’accès est fourni avec un utilitaire de configuration (Access Point Manager). Il est
livré prêt à l’emploi avec les réglages d’usine par défaut. Les modifications de la configuration
sont faites en utilisant le programme Access Point Manager software, par navigateur web ou
par une console RS-232 ou une connexion directe Ethernet Telnet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
3.1. Utilitaire de configuration Access Point Manager
Le programme de configuration Windows,
Access Point Manager vous fournit une
consultation facile, une vérification et la
modification des paramètres du
point d’accès.
Insérez le CD ou la disquette dans le
lecteur de l’ordinateur que vous souhaitez
connecter. Lancez le programme
d’installation setup.exe de la disquette ou
du CD-ROM fourni et suivez les
instructions suivantes. L’installation
terminée, démarrez le programme
Access Point Manager. Il va
automatiquement rechercher et détecter
tous les points d’accès LINDY sur votre
réseau.
Double-cliquez sur n’importe quel
symbole de point d’accès pour voir
ou modifier les paramètres de ce
dernier. Le mot de passe par
défaut installé est “default”.
Après avoir entré le bon mot de passe, le
programme va afficher l’adresse MAC,
la région de fréquence concernée (dépend
des pays où l’appareil est utilisé), la version
du BIOS, les statistiques de connexions, la
page de mise à jour, les accès sécurisés,
les paramètres de cryptage, etc.
(Pour plus de détails concernant les Statistics
veuillez vous référer à l’extension en langue
anglaise à ce manuel)
Si vous souhaitez installer un réseau sans fil
avec plus d’un point d’accès et si vous
débutez dans ce milieu, veuillez contacter
votre revendeur local ou le service technique
de LINDY.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
Configuration
L’utilitaire de configuration fournit quatres
différents modes d’utilisation pour le point
d’accès:
General
Standard AP with Roaming
Inter Building AP (Repeater, PxP)
Station Adapter – Infrastructure (SAI)
Station Adapter Ad-hoc (SAA)
(Pour plus de détails, veuillez vous référer à
l’extension anglaise du manuel)
IEEE802.11
‚ESSID’ est différent du réseau W-LAN que
vous installez. Si ce réseau sans fil doit être
accessible par tous les clients potentiels, il est
suggéré d'utiliser le paramètre‚Use Non-
Specified ESSID: non-speci’, respectivement le
nom ESSID sur "ANY". Si vous souhaitez
protéger l'accès à votre réseau sans fil contre
tout accès non autorisé, il est conseillé de donner un nom ESSID spécifiques à tous vos clients
étants capables de se connecter au réseau WLAN.
Channel settings, etc.
Administration (Mot de passe)
IP Adress
Adresse IP, masque de sous-réseau, passerelle
WEP
WEP (Wireless Encryption Protocol) est le
standard de cryptage pour le réseau sans fil.
Le standard WEP-40 est le standard actuel.
Sélectionnez WEP-40 pour les transferts de
données sécurisés IEEE et soyez certain que
tous les clients du réseau sans fil WLAN
utilisent la même clé.
(Pour plus de détails, consultez l’extension
anglaise de ce manuel)
Contrôle d’accès
Le contrôle d’accès vous permet de créer une liste d’adresses MAC pour les cartes PCMCIA
autorisées. L’accès au réseau sans fil est uniquement autorisé pour les clients enregistrés dans
cette liste.
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
3.2. Utilitaire Web
Le point d’accès fournit une
interface web pour l’utilisateur
Avec l’adresse IP préréglée
http://192.168.1.1 vous aurez
accès à la page web du point
d’accès. Entrez le mot de passe
pour continuer.
Le contenu de la page suivante
est très similaire aux
informations indiquées au
paragraphe précédent 3.1.
Configuration du point d’accès.
(Pour plus de détails, consultez
l’extension anglaise de ce
manuel)
3.3. Administration par une console RS-232 ou Telnet TCP/IP
Le point d’accès peut être contrôlé à partir d’une console RS-232 (terminal) à l’aide
d’un câble Nullmodem.
Une connexion alternative Telnet TCP/IP peut également être utilisée avec une connexion
Ethernet.
Installez votre câblage et lancez le programme du terminal. Les options de configuration restent
les mêmes que citées ci-dessus.
(Pour plus de détails, consultez l’extension anglaise de ce manuel)
Download from Www.Somanuals.com. All Manuals Search And Download.
Manuel condensé en français
4. Problèmes techniques
Si vous rencontrez des problèmes durant l’installation du point d’accès W-LAN 11, la première
chose à faire pour résoudre le problème est de vérifier l’activité des LEDs sur le point d’accès.
Le tableau des erreurs LED suivant vous permettra certainement de résoudre le problème:
PWR
AP
WLAN LAN
Vert Vert
LINK
Description/Action
Vert Fonctionnement normal
Fixe indiquant une activité sur
Vert Continu
Clignot. Cligno.
l’interface.
Pas d’action nécessaire.
Fonctionnement normal
-
Vert Continu
indiquant aucune activité réseau.
Allumé
Eteint Eteint
-
Pas d’action nécessaire.
Problème d’alimentation.
Vérifiez le cordon
d’alimentation.
Vérifiez l’alimentation.
Eteint
Eteint
Eteint Eteint Eteint
Eteint Eteint Eteint
BIOS invalide ou microcontrôleur
défectueux.
Eteint
Retournez l’élément à votre
fournisseur pour support.
BIOS du point d’accès invalide.
Mettre à jour le BIOS par
l’utilitaire fourni ou par le
mode console.
Vert Continu
Vert Clignot.
-
-
-
-
Initialisation du réseau sans fil
Vérifiez que le module de
réseau sans fil a été
correctement installé.
Problème d’initialisation du
réseau Ethernet
Vert
Clignot.
Vert Clignot.
Vert Clignot.
-
-
Vert
Cligno.
-
Retournez le produit à votre
fournisseur.
Si vous ne parvenez toujours pas à résoudre le problème rencontré en vérifiant les LED d’activité, l’erreur peut
provenir d’un problème de configuration W-LAN 11 empêchant le produit d’établir une connexion sans fil sur votre
réseau. Il est conseillé dans ce cas de vérifier les points suivants.
Touches WEP: Si le cryptage de données est activé, vérifiez bien que le réglage des touches WEP
soit exactement le même sur le point d’accès que sur les stations connectées.
Contrôle d’accès: Soyez sûr que l’adresse MAC du W-LAN 11 ne soit pas incluse dans la table de
contrôle d’accès des périphériques sans fil.
Download from Www.Somanuals.com. All Manuals Search And Download.
Estratto del Manuale in Italiano
1. Introduzione
La LINDY W-LAN 11 (Wireless LAN con 11 Mb/s) offre una soluzione rapida ed affidabile per
trasmissioni in cablaggi di rete professionali senza fili. E’ compatibile con gli standard
IEEE802.11b e 802.11. ed è ideale per l’utilizzo in edifici storici dove non vi è una struttura che
non può essere cablata, per la richiesta di accesso alla rete all’interno di un edificio, e per libero
ed aperto accesso alla rete (Internet) p.es. nelle università, hotel ecc.
Le connessioni possono essere stabilite come punto-a-punto (p.es. notebook con schede W-
LAN PCMCIA), tra punti di accesso (ripetitori wireless) o tra punti di accesso e client (scheda
PCMCIA o similari). La LINDY Access Point offre una funzione di roaming cosicché anche
edifici di grandi dimensioni possono essere coperti dalla rete LAN senza fili.
La massima distanza di trasmissione tra due punti dipende dall’ambiente locale, dalla
costruzione dell’edificio e dalla disposizione dei muri dai soffitti e dal tipo di metalliche
costituisce le parti dell’edificio. Sotto una condizione ideale la trasmissione copre un raggio fino
a 45m, nella maggior parte dei casi la distanza è tra 15 e 25m. In un ambiente libero senza
riflessioni una distanza di 250m può essere raggiunta.
Prego notare:
g) Una rete LAN senza fili può essere facilmente accessibile da persone estranee non
autorizzate. Solo quando il criptaggio è stato attivato vi è una sicurezza contro
questo!
h) Senza aver attivato il Controllo di Accesso e senza nessuna password ogni utente
con una rete senza fili LAN IEEE802.11 compatibile può accedere all’interno della
stessa !
Prego fare riferimento alla descrizione dettagliata più avanti in questo manuale.
Infrastruttura Rete senza fili
In una infrastruttura di rete senza fili, la W-LAN 11 agisce come un ponte. Il punto di Accesso
connette la rete senza fili ai client insieme ed agisce un punto centrale per tutte le
comunicazioni senza fili. Questo aumenterebbe l’efficienza delle comunicazioni poiché i
dispositivi wireless non necessitano di essere posti all’interno di uno schema in serie uno dopo
l’altro.
2. Installazione Hardware
Prima di iniziare assicurarsi che I seguenti articoli siano inclusi:
La LINDY W-LAN 11 Access Point
L’alimentatore
Il disco di Installazione o il CD
Se qualcosa manca o è danneggiata, prego contattare il Suo rivenditore.
Posizionamento del Punto di Accesso
Prima dell’installazione determinare la posizione migliore per l’AP. La posizione dovrebbe
essere centrale, relativamente all’area di copertura dell’W-LAN. Dovrebbe essere posizionato
ad una certa distanza dalle pareti dell’edificio. L’AP può essere messo anche su di una
superficie piana o montato verticalmente sul muro.
Connessioni
Connettere la porta MDI dell’AP all’hub Ethernet o connettere la porta MDI-X al computer o alla
stazione di lavoro utilizzando un cavo dritto STP/UTP. Connettere l’alimentatore all’AP e collegarlo alla
corrente.
Download from Www.Somanuals.com. All Manuals Search And Download.
Estratto del Manuale in Italiano
Visione posteriore del vostro W-LAN 11 Access Point:
100M TX
Link RX
POWER
MDI
MDI-X
RS-232
OR
Power:
MDI:
MDI-X
Collegare qui l’alimentatore.
Connettore RJ-45 per Hub Ethernet con 10BaseT o 100BaseTX.
Connettore RJ-45 per collegare un computer o stazione di lavoro, potete
solamente utilizzare uno dei connettori indicanti MDI / MDI-X!
Porta console per configurare e programmare l’Access Point
Display dello stato del cablaggio Ethernet
RS-232
LED
Dopo aver correttamente connesso tutto il cablaggio della LAN dovrebbe apparire sul LED dei
collegamenti la luce verde quando gli hub o le stazioni di lavoro/computer sono connesse.
La parte superiore del panello dell’W-LAN 11 Access Point
La seguente tabella indica una visione complessiva di ciascun LED di attività:
Descrizione
Definizione LED Attività
PWR
AP
Verde Costante
Alimentazione attiva
Il W-LAN 11 è ora in attività
Off: Wireless inattiva
Verde Costante
WLAN
LAN
Verde Lampeggiante
Lampeggiante: Wireless RX/TX
attiva
Off: Nessun segnale di attività
Ethernet
Lampeggiante: Trasmissione
attiva nel cablaggio LAN
Off: nessuna stazione è connessa
all’Access Point
On: con uno o più stazioni
collegate al W-LAN 11
Verde Lampeggiante
Verde Costante
LINK
3. Configurazione / Installazione
L’Access Point è provvisto di una utilità per una facile configurazione da parte dell’utente
(Access Point Manager). E’ fornito pronto per l’utilizzo con una configurazione di base per
l’uso in normali condizioni con una W-LAN. Qualsiasi cambiamento della configurazione può
essere effettuato mediante l’utilizzo del Software Access Point Manager, dall’amministratore
del sistema web browser o utilizzando la console di amministrazione tramite RS-232 o
direttamente via connessione Ethernet Telnet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Estratto del Manuale in Italiano
3.1. Configurazione delle Utility da Access Point Manager
Il programma della configurazione di base
di Windows; Access Point Manager
permette un facile monitoraggio, controllo
e cambio dei parametri dell’Access Point.
Inserire nel computer che desiderate
utilizzare e collegare all’ AP, il CD o il
Floppy disk che è compreso nella
fornitura. Avviare il programma di
installazione setup.exe dal CD o dal
dischetto
e
seguire
le
istruzioni
successive. Successivamente avviare il
programma Access Point Manager.
Automaticamente cercherà e rileverà tutti i
LINDY Access Points nella rete.
Doppio click su ogni simbolo
Access Point per visualizzare o
cambiare il settaggio dell’AP
selezionato. La Password di base è
“default”
Dopo aver inserito la password
corretta il programma mostrerà
l’indirizzo MAC, la frequenza di
dominio (dipendente a seconda
della zona dove è utilizzata), la versione del
firmware, le statistiche delle connessioni, la
pagina dell’aggiornamento delle utilità,
sicurezza, i parametri di accesso e criptaggio,
ecc.
(Per maggiori dettagli sulle Statistiche prego
fare riferimento alle estensioni del manuale in
Inglese).
Se desiderate settare una rete LAN senza fili
con più di un Access Point e non avete
familiarità con l’installazione di questo tipo di
WLAN, prego contattare il fornitore locale
oppure il supporto tecnico LINDY.
Al momento stiamo provvedendo ad
aggiungere ulteriori informazioni sul nostro
sito Internet alla sezione TIPS & MORE sulla
homepage
LINDY
Download from Www.Somanuals.com. All Manuals Search And Download.
Estratto del Manuale in Italiano
Configurazione
I metodi di configurazione prevedono Quattro
differenti modi di operare per l’Access Point:
Generale
Standard AP con Roaming
AP Edifici Sotterranei (Ripetitore, PxP)
Adattatore Stazione – Infrastrutture (SAI)
Adattatore Stazione Ad-hoc (SAA)
(Per ulteriori dettagli prego fare riferimento
alle estensioni del manuale in Inglese)
IEEE802.11
‚ESSID’ definisce il nome della W-LAN
installata. Se questa WLAN sarà accessibile
per tutti i potenziali/client si dovrebbe
utilizzare il settaggio, Uso Non-Specificato
ESSID: non-speci', rispettivamente il nome
della ESSID "ALCUNO". Se si vuole essere
certi degli accessi alla WLAN, si dovrebbe
specificare il nome ESSID a tutti i client che
potranno connettersi alla WLAN.
Settaggio-ID, settaggio canali, ecc.
Amministrazione (Password)
Indirizzi IP
Indirizzi IP, Netmask, Gateway
WEP
WEP (Wireless Encryption Protocol) è il
Criptaggio standard per LAN senza fili. Al
momento WEP-40 è lo standard attuale.
Selezionare WEP-40 per lo standard
compatibile IEEE (relativo) in merito alla
sicurezza del trasferimento dati e assicurarsi
che ogni client WLAN utilizzi esattamente la
stessa chiave.
(Per ulteriori dettagli prego fare riferimento alle
estensioni del manuale in Inglese)
ACCESSO CONTROL
L’ Access Control permette di creare una lista di
indirizzi MAC per autorizzare altre schede
PCMCIA. Accedere alla W-LAN è possible
SOLO per I client presenti in questa lista.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data / CE Declaration of Conformity
3.2. Utilità Web
Management
L’Access Point dispone anche di
un’ interfaccia grafica web browser
Con
http://192.168.1.1 potete avere
accesso alla pagina Web
gli
Indirizzi-IP
iniziali
dell’Access Point. Inserire la
password per continuare.
I
contenuti delle seguenti
pagine sono molto similari alle
informazioni fornite nelle pagine
precedenti nella sezione 3.1.
Configurazione
Programma
Access Point Manager.
(Per ulteriori dettagli prego fare
riferimento alle estensioni del
manuale in Inglese)
3.3. Amministrazione tramite console RS-232 o Telnet TCP/IP
L’accesso all’Access Point può anche avvenire tramite il collegamento di una console RS-232
(programmazione terminale) utilizzando un cavo Nullmodem.
Diversamente può essere usata una connessione Telnet TCP/IP di tipo Ethernet.
Installare il cavo ed avviare il programma del terminale. Le opzioni di configurazione sono molto
simili a quelli descritte nei precedenti capitoli.
(Per ulteriori dettagli prego fare riferimento alle estensioni del manuale in Inglese).
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data / CE Declaration of Conformity
4. Soluzione ai Problemi
Se avete difficoltà ad utilizzare il W-LAN 11 Wireless LAN Access Point, il punto di partenza per
ogni problema è guardare I LED di attività sull’ Access Point. La seguente “Tabella Errori LED”
è prevista per assistervi nella diagnostica e nelle operazioni per la risoluzione dei problemi.
PWR
AP
WLAN LAN
LINK
Descrizione/Azione
Fisso Normale operazione dove il
Verde lampeggio indica attività.
Verde
Costante
Flash
Verde Verde
Flash
Nessuna azione richiesta.
-
Verde
Costante
Normale operazione indicante
che non c’è attività nella LAN.
On
Off
Off
Off
Off
Off
-
Nessuna azione richiesta.
Alimentazione mancante.
Off
Off
Off
Verificare il cavo aliment.
Verificare l’alimentatore.
Invalidità del caricamento del
firmware o guasto al micro-
controller
Off
Off
-
Off
Restituire al fornitore per la
sostituzione.
Invalidità del firmware
dell’Access Point.
Intermitt.
Verde
Verde
Costante
-
-
-
Aggiornare il firmware
tramite le utilità o la console.
Inizializzazione della Wireless
LAN fallita
Intermitt. Intermitt.
Verde
-
-
Verificare che il modulo
wireless sia stato
correttamente installato.
Inizializzazione Ethernet fallita
Restituire il prodotto al
fornitore per la sostituzione.
Verde
Intermitt.
Verde
Intermitt.
Verde
-
Se non è stato possibile risolvere il problema controllando I LED di attività, l’errore può essere causato da un
conflitto della configurazione proveniente dal W-LAN 11 nello stabilire una connessione senza fili con la Vostra rete.
Potete verificare quanto segue per assicurarsi delle normali operazioni del W-LAN 11.
Tasti WEP: Se il criptaggio dei dati è attivo, ricordarsi di settare sempre i tasti WEP nello stesso
modo di quelli dell’Access Point come sulle altre stazioni.
Controllo Accesso: Assicurarsi che l’indirizzo MAC del Vostro W-LAN11 non sia incluso
nell’Access Control degli altri dispositivi wireless.
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data / CE Declaration of Conformity
EG-Konformitätserklärung gemäß dem Gesetz über Funkanlagen
und Telekommunikationsendeinrichtungen (FTEG)
und der Richtlinie 1999/5/EG (R&TTE)
EG-Konformitätserklärung gemäß dem Gesetz über Funkanlagen
und Telekommunikationsendeinrichtungen (FTEG)
und der Richtlinie 1999/5/EG (R&TTE)
EC Declaration of Conformity in accordance with the Radio and
Telecommunications Terminal Equipment Act (FTEG)
and Directive 1999/5/EC (R&TTE Directive)
EC Declaration of Conformity in accordance with the Radio and
Telecommunications Terminal Equipment Act (FTEG)
and Directive 1999/5/EC (R&TTE Directive)
Wir erklären, dass das folgend bezeichnete Produkt
We declare that the following designated product
Wir erklären, dass das folgend bezeichnete Produkt
We declare that the following designated product
LINDY WLAN Access Point, Art.Nr.: 52020
(Funkanlage Geräteklasse 2 / Radio Equipment, Equipment Class 2 )
LINDY WLAN Access Point, Art.Nr.: 52022
(Funkanlage Geräteklasse 2 / Radio Equipment, Equipment Class 2 )
bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des § 3
und den übrigen einschlägigen Bestimmungen des FTEG (Artikel 3 der R&TTE)
entspricht.
bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des § 3
und den übrigen einschlägigen Bestimmungen des FTEG (Artikel 3 der R&TTE)
entspricht.
complies with the essential requirements of §3 and the other relevant provisions of the FTEG (Article 3
complies with the essential requirements of §3 and the other relevant provisions of the FTEG (Article 3
of the R&TTE
of the R&TTE
Directive), when used for its intended purpose.
Directive), when used for its intended purpose.
Das Produkt beinhaltet das Funkmodul LINDY PCMCIA Card Art. Nr. 52000
The product contains the radio frequency module LINDY PCMCIA Card Art. No. 52000.
Das Produkt beinhaltet das Funkmodul LINDY PCMCIA Card Art. Nr. 52002
The product contains the radio frequency module LINDY PCMCIA Card Art. No. 52002.
Das Produkt entspricht den Anforderungen der Richtlinien 1999/5/EG (R&TTE),
73/23/EG (Niederspannungsrichtlinie) und 93/68/EG. Die Bewertung der Konformität
des Produktes bezüglich der Anforderungen der Elektrischen Sicherheit erfolgte
basierend auf folgendem Standard:
Das Produkt entspricht den Anforderungen der Richtlinien 1999/5/EG (R&TTE),
73/23/EG (Niederspannungsrichtlinie) und 93/68/EG. Die Bewertung der Konformität
des Produktes bezüglich der Anforderungen der Elektrischen Sicherheit erfolgte
basierend auf folgendem Standard:
The product complies with the requirements of R&TTE Directive 1999/5/EEC, the European
Community Directives 73/23/EEC and 93/68/EEC. Assessment of compliance of the product with the
requirements relating to Electrical Safety was based on the following standard:
The product complies with the requirements of R&TTE Directive 1999/5/EEC, the European
Community Directives 73/23/EEC and 93/68/EEC. Assessment of compliance of the product with the
requirements relating to Electrical Safety was based on the following standard:
EN 60950 : 1997
EN 60950 : 1997
Das Produkt entspricht Anforderungen den Richtlinie 1999/5/EG (R&TTE) und
89/336/EG (EMV, Elektromagnetische Verträglichkeit). Die Bewertung der
Konformität des Produktes bezüglich der Anforderungen der Elektromagnetischen
Verträglichkeit erfolgte basierend auf folgenden Standards:
Das Produkt entspricht Anforderungen den Richtlinie 1999/5/EG (R&TTE) und
89/336/EG (EMV, Elektromagnetische Verträglichkeit). Die Bewertung der
Konformität des Produktes bezüglich der Anforderungen der Elektromagnetischen
Verträglichkeit erfolgte basierend auf folgenden Standards:
The product complies with the essential protection requirements of R&TTE Directive 1999/5/EEC and
of the Council Directive 89/336/EEC. Assessment of compliance of the product with the requirements
relating to Electromagnetic Compatibilty was based on the following standard:
The product complies with the essential protection requirements of R&TTE Directive 1999/5/EEC and
of the Council Directive 89/336/EEC. Assessment of compliance of the product with the requirements
relating to Electromagnetic Compatibilty was based on the following standard:
ETS 300 826 (+A1):1997, EN55022:1997,
EN50081-1:1992, EN50082-1:1992
ETS 300 826 (+A1):1997, EN55022:1997,
EN50081-1:1992, EN50082-1:1992
Das Produkt entspricht den grundlegenden Anforderungen der Richtlinie 1999/5/EG
(R&TTE) bezüglich der Maßnahmen zur effizienten Nutzung des
Das Produkt entspricht den grundlegenden Anforderungen der Richtlinie 1999/5/EG
(R&TTE) bezüglich der Maßnahmen zur effizienten Nutzung des
Funkfrequenzspektrums. Die Bewertung der Konformität des Produktes (Klasse 2.7)
bezüglich der Anforderungen der Funkfrequenzenbelange (Maßnahmen zur
effektiven Nutzung des Funkspektrums) erfolgte basierend dem Anhang IV der
Funkfrequenzspektrums. Die Bewertung der Konformität des Produktes (Klasse 2.7)
bezüglich der Anforderungen der Funkfrequenzenbelange (Maßnahmen zur
effektiven Nutzung des Funkspektrums) erfolgte basierend dem Anhang IV der
Richtlinie 1999/5/EG und auf folgendem Standard:
Richtlinie 1999/5/EG und auf folgendem Standard:
The product complies with the essential protection requirements of R&TTE Directive 1999/5/EEC on
the approximation of the laws of the Member States relating to Radio Spectrum Matters. Assessment
of compliance of the product (class 2.7) with the requirements relating to Radio Spectrum Matters was
based on Annex IV of the Directive 1999/5/EC and the following standard:
The product complies with the essential protection requirements of R&TTE Directive 1999/5/EEC on
the approximation of the laws of the Member States relating to Radio Spectrum Matters. Assessment
of compliance of the product (class 2.7) with the requirements relating to Radio Spectrum Matters was
based on Annex IV of the Directive 1999/5/EC and the following standard:
ETS 300 328 : 1997
ETS 300 328 : 1997
Einschränkungen / Limitations
Einschränkungen / Limitations
Das genannte Produkt darf nur in folgenden Mitgliedsländern der EG vertrieben
Das genannte Produkt darf nur in folgenden Mitgliedsländern der EG vertrieben
und in Betrieb genommen werden:
und in Betrieb genommen werden:
Deutschland, Italien, Östreich, England, Belgien, Niederlande, Luxemburg.
The product may only be sold and brought into use in the following memebr countries of the
EC:
Frankreich.
The product may only be sold and brought into use in the following memebr countries of the
EC:
Germany, Italy, Austria, Great Britain, Belgium, Netherlands, Luxemburg.
France.
In folgenden Ländern der EG darf das Produkt nicht in Betrieb genommen
In folgenden Ländern der EG darf das Produkt nicht in Betrieb genommen
werden:
werden:
In the following member countries of the EC the product may NOT be brought into use :
In the following member countries of the EC the product may NOT be brought into use :
Frankreich / France , Spanien / Spain / Espagne.
Spanien / Spain / Espagne.
Diese Einschränkungen beruhen maßgeblich auf den vom Gerät verwendeten
Diese Einschränkungen beruhen maßgeblich auf den vom Gerät verwendeten
Funkfrequenzen, die bei Ausfertigung dieser Konformitätserklärung NICHT
Funkfrequenzen, die bei Ausfertigung dieser Konformitätserklärung NICHT
europaweit einheitlich harmonisiert und nutzbar waren/sind.
These limitations are due to the radio frequency range used by the unit that are not yet
harmonized throughout all countries of the EC.
europaweit einheitlich harmonisiert und nutzbar waren/sind.
These limitations are due to the radio frequency range used by the unit that are not yet
harmonized throughout all countries of the EC.
Diese Erklärung wird verantwortlich für
abgegeben durch
Diese Erklärung wird verantwortlich für
abgegeben durch
LINDY Elektronik GmbH
Markircher Straße 20
68229 Mannheim
Germany
LINDY Elektronik GmbH
Markircher Straße 20
68229 Mannheim
Germany
Jürgen Lindenberg
Geschäftsführer
Mannheim, 19. FEB 2001
Jürgen Lindenberg
Geschäftsführer
Mannheim, 19. FEB 2001
............................................
............................................
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (APR 2001)
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Data / CE Declaration of Conformity
Product
LINDY W-LAN 11 Wireless LAN Access Point
Wired Interface
10/100BaseT (RJ-45)
Serial Port
DB9 RS-232 (configuration port)
11Mbps Wireless LAN IEEE 802.11/11b
DSSS (CCK, DQPSK, DBPSK)
Wireless Interface
Modulation
Operating Frequency
Europe CE/ETSI: 2.412~2.472 GHz (13 channels)
LINDY Art.No. 52020
Europe France: 2.457~2.472 GHz (4 channels)
LINDY Art.No. 52022
[Europe Spain: 2.457~2.462 GHz (2 channels)]
11M/5.5M/2M/1M, also supports Auto Rate Selections
Direct Sequence Spread Spectrum
DC 12V (External power supply included), < 1200mA
13 dBm (20mV)
Speed Options
RF Technology
Power Supply
RF Output Power
Sensitivity
-84dBm @ 11Mbps, PER < 8* 10-2
Integrated dipole antenna
Antenna
LINDY Art.No. 52020
LINDY Art.No. 52022
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Kyocera Cell Phone KX9B User Manual
Lenoxx Electronics Telephone PH 329 User Manual
Lincoln Electric Welder FCAW G User Manual
Linear Satellite Radio DXT 61 User Manual
Marantz CD Player DR4050 User Manual
Marantz Home Theater Server DH9500 User Manual
Marantz Home Theater System SR6005 User Manual
MB QUART Car Speaker PSC 216 User Manual
McDATA Switch IPS4300 User Manual
Mercedes Benz Automobile SL 500 User Manual