GB
User and Installation Instructions
for fridge-freezer combination
Ventilation
Ventilation
7082 532-00
IC/ICN...6
0507
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep these user instructions in a safe place and, if appropriate,
hand them to the next owner of the appliance.
Safety information and warnings
The instructions apply to several models, so may vary slightly.
Information concerning disposal
Your fridge/freezer is packed in recyclable packag-
ing.
Contents
GB
The appliance at a glance.................................................14
Conditions ........................................................................15
Safety information and warnings.......................................15
Information concerning disposal .......................................15
Technical safety ................................................................15
Safety in use .....................................................................15
Installation and ventilation information ..............................16
Energy saving information ................................................16
Connection .......................................................................16
Putting into operation and controls....................................16
Switching the appliance on and off ..................................16
Setting the temperature ....................................................16
Temperature display .........................................................16
Alarm - audible signal .......................................................17
Ventilation .........................................................................17
SuperCool ........................................................................17
Power failure/”FrostControl” display .................................17
Additional functions ..........................................................17
Net@Home .......................................................................17
Fridge section ...................................................................18
Organising food storage....................................................18
Information about keeping food cool .................................18
Changing the layout ..........................................................18
Freezer section .................................................................18
SuperFrost........................................................................18
Freezing with SuperFrost ..................................................18
Freezing and storage information......................................18
The Information System*...................................................19
The freezer tray.................................................................19
The cold accumulators* ...................................................19
VarioSpace*......................................................................19
Defrosting, cleaning..........................................................20
Information about defrosting .............................................20
Cleaning ...........................................................................20
Faults - problems? ............................................................20
Customer services and type plate.....................................21
Installation instructions .....................................................21
Installation information......................................................21
Replacing the door stop....................................................22
Fixing and assembly.........................................................23
Fitting the kitchen unit door...............................................24
-
-
-
-
Corrugated cardboard/cardboard
Moulded polystyrene foam
Polyethylene film
Polypropylene straps
Donotallowchildrentoplaywithpackagingmaterials
- the film can be a suffocation hazard!
•
•
Take the packaging materials to a public amenity site.
Theoldappliance:Thisstillcontainsvaluablematerials
and should be sent to a special facility, separate from
unsorted municipal waste.
Make sure that the old appliance cannot be used.
Remove the plug, cut through the connection cable,
andmakesurethelockcannotengage,sothatchildren
cannot get locked inside.
•
When transporting the used appliance make sure that the
coolant circuit cannot be damaged.
•
Please see the type plate for information about the coolant.
The old appliance must be disposed of in a proper manner in
accordance with local regulations and legislation.
•
•
Technical safety
•
To avoid personal injury and material damage the
appliance must be transported only in a packed
condition, with two people to carry it.
•
•
•
The coolant, R 600a, is environmentally friendly, but it is flam-
mable.
Donotdamagethecoolantpipes.Coolantemerginginaspray
can cause injuries to eyes, or can ignite.
In the event that coolant should escape, remove any naked
flames or sources of ignition in the vicinity of the leak, remove
the plug, and ventilate the room well.
•
•
Iftheapplianceisdamaged,contactyoursupplierimmediately
- before plugging it in.
Toensuresafeoperation, theapplianceshouldbeassembled
and connected only in accordance with the user instruc-
tions.
•
•
Intheeventofafault,disconnecttheappliancefromthemains:
pull out the plug (do not tug on the cable) or trip/unscrew the
fuse.
Only customer services should carry out any repairs or
interventionsontheappliance.Abreachofthisinstruction
could cause considerable danger to the user. The same
applies when replacing the mains connection cable.
Conditions
•
The appliance is intended for use to cool, freeze and store
food, and to make ice. It is designed for household use. No
guarantee is given that the appliance will work perfectly if it
is used for any.other purpose.
Safety in use
•
Donotusetheappliancetostoreexplosivematerials
or aerosol cans with flammable propellants, such as
butane,propane,pentaneetc.Theelectricalcompo-
nents could cause any gas emerging from these to
ignite. You can recognise aerosol cans of this type from the
list of contents printed on them, or from the flame symbol.
Always store high-percentage alcoholic drinks in a sealed
container, and standing up.
•
Depending on its climate class, the appliance is designed for
operationwithincertainambienttemperaturelimits.Theseup-
per and lower limits must not be exceeded! The climate class
for your appliance is printed on the type plate. It means:
•
•
•
•
Climate class
SN
N
ST
T
for ambient temperatures from
+10 °C up to +32 °C
+16 °C up to +32 °C
+18 °C up to +38 °C
+18 °C up to +43 °C
Do not use a naked flame or other source of ignition to look
inside the appliance.
Donotuseanyelectricalappliances(suchassteamcleaners,
heaters, etc.) inside the appliance.
Do not use the base, the drawers, or the doors etc as a step
or to act as a support.
-
-
The coolant circuit has been tested for seal.
When installed, the appliance complies with all relevant regu-
lations and the 73/23/EEC and 89/336/EEC Directives.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
This appliance is not suitable for people (including children)
with physical, sensory or mental problems, or for people who
do not have sufficient experience and knowledge, unless they
areinstructedinusingtheappliance,oraresupervisedinitially
by a person who is responsible for their safety. Children must
supervised, to ensure that they do not play with the appli-
ance.
Putting into operation and controls
9
6
8
11 10
7
Avoid continuous skin contact with cold surfaces or with cool
andfrozenfood.Thiscancausepain,numbnessandfreezing.
If you are likely to have extended skin contact, take precau-
tions, such as wearing gloves.
Ventilation
4
3
2
1
5
•
•
Donotconsumeedibleice,particularlywatericeandicecubes,
immediately after you have taken them out of the freezer. The
very low temperatures can cause “burning”.
We recommend that you clean the appliance before putting it
into operation, please see the section on “Cleaning” for further
information.
Do not consume food that has been stored for too long, since
this can cause food poisoning.
Theapplianceshouldhavebeenoperatingforabout2hoursbefore
you stock it with frozen food. Only place frozen food in the freezer
once the temperature has reached at least -18°C.
Installation and ventilation information
•
•
When erecting/installing the appliance, make sure
that the coolant pipes are not damaged.
Do not move the ventilation cross-sections.
Always make sure that air can circulate around
the appliance for ventilation purposes!
Switching on and off
The entire appliance is always switched on at the main
on/off switch 3, both the freezer and the fridge sections.
•
To comply with the EN 378 standard the position in
which you erect your appliance must indicate a volume of 1 m
foreach8gofR600acoolant3 sothatintheeventofaleakfrom
the coolant circuit a flammable gas/air mixture cannot arise
insidetheroomwheretheapplianceispositioned. Pleasesee
the type plate inside the appliance for information regarding
the quantity of coolant.
W Switching on: Press the on/off switch 3 so that the tempera-
ture displays light up/flash.
-
-
Refrigeratorsection:Theinsidelightcomesonwhenthedoor
is open.
Freezer section: While the appliance is being put into opera-
tion, and it is still warm, the freezer section display indicates
dashes until the temperature goes below 0°C.
•
•
Please also see the appendix of the installation instructions.
Once the appliance is installed: Remove all the transport
safety devices,
W Switching off: Hold the main on/off switch 3 for about a
second, so that the temperature display turns dark.
-
-
Removeallstickytapeorspacers*fromtheshelvesandadjust
them to the heights you require.
W If you only wish to switch off the fridge /BioFresh section (the
freezerstaysswitchedon,usefulifgoingonholidayforexample)
then press the on/off switch 9so that the temperature
display on the fridge 6and the interior light goes off.The
temperature display on the freezer 5must remain lit.
Remove all protective film: from the decorative strips and the
fronts of the drawers.
Setting the temperature
Connection
The appliance is set as standard for normal operation;in the fridge
section we recommend +5°C, and for the freezer -18°C.
Reducingthetemperature/colder:PresstherelevantDown-but-
ton, on the left for the fridge: 8, on the right for the freezer: 4.
Increase temperature/warmer: Press the relevant Up-button.
Electric current (alternating current) and voltage
The information on the type plate must conform with the
location. The type plate is located inside the appliance
on the left, fig.A.
•
Theappliancemustbeconnectedusingaproperly
installed shock-proof plug.
-
While you are making the adjustment the set value display
flashes.
•
The plug must be fused with a 10A or higher fuse, and must
be located outside the rear of the appliance, and must be easy
to access.
-
The first time you press the temperature setting button, the cur-
rent most recent setting value (= nominal value) appears
on the display.
•
-
-
The appliance must not
-
-
If you it press again briefly, the set value changes in 1°C steps,
and if you hold it down, will continue to change.
About5secondsafterthefinaltouchofthebutton, theelectron-
ics automatically change the setting, and the actual freezer or
fridge temperature (= actual value) is displayed.
be connected to stand-alone inverters,
be operating in conjunction with so-called energy-saving
plugs. This can damage the electronics,
be connected via an extension lead and with other appliances
- there is a danger of overheating.
-
The temperature can be adjusted in the
•
Whenremovingthemainscablefromthesideoftheappliance,
remove thecable retainer otherwise there could be vibratory
noise!
W fridge section: from 11 °C to 2 °C, in the
W freezer section: from -16 °C to -26 °C.
It depends on where the appliance is located as to whether
the lowest temperature will be reached, in high ambient
temperatures, it may not be possible to achieve the lowest
temperature.
Energy saving information
•
•
•
Make sure the appliance is in a well ventilated position.
Open the appliance doors for as short a time as possible.
Arrange the food in an organised way. Do not exceed stated
storage periods.
Temperature display
In normal operation:
-
-
the average temperature inside the fridge is 6and
•
•
Store all food well packed and covered, this avoids frost from
forming.
the warmest temperature of frozen food 5is displayed.
Allow hot food to cool down to room temperature before plac-
ing inside the appliance.
The display flashes, if you
-
-
change the temperature setting, or
•
•
Allow frozen food to defrost inside the fridge.
In the event of a fault, keep the door closed. This delays the
cold loss. The quality of the frozen food will keep for longer.
if the temperature rises by several degrees, indicating a loss
of cooling capacity, for example warm air can temporarily raise
the temperature when you open the door to store fresh “warm”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
food, or to remove or sort out frozen items. Once you have fin-
ished placing items in the fridge, or sorting out the items, the
electronics automatically adjust the temperature to the most
recent setting. A short-term increase in temperature will not
affect the frozen food.
W If, while the nA-symbol is showing, you press the alarm off
button 1the warmest temperature that occurred during the
power cut is displayed.
Depending on how warm the temperature became, even to the
point of defrosting, you should check the quality of the food,
and decide how to deal with it!
W If the display is showing “F 0” to “F 5” the appliance has a fault.
Please contact your customer services, and inform them about
the indication.This will make it possible to provide fast and ac-
curate service.
-
This “warmest temperature” displays for approximately one
minute. After that the electronics system displays the current
actual freezing temperature. If you repeatedly press the alarm
off button, you can delete the “warmest temperature” display.
GB
Alarm - audible signal
When the power cut ends, the appliance continues to operate at
the most recent temperature setting.
The audible warning signal will help you to protect your stored
frozen food, and to save energy.
Additional functions
W The audible signal can be shut off by pressing the alarm off
You can use the setting mode to set the child lock, and change
the brilliance of the displays*
button 1,
-
-
automaticallyonceitreachesatemperaturesufficientforstoring
the food safely, or
Activating the setting mode:
W Press the SuperFrost button for about 5 seconds - the Super-
Frost button flashes - the display indicates c for child lock.
Note:The value you are about to alter is flashing.
W Press the Up/Down button to select the function you want:
c = child lock,
when the door is closed.
Door alarm (for fridge section and freezer section)
-
This always sounds if the door is kept open for longer than 60
seconds.
h = brilliance or
Thewarningsignalswitchofffunctioniseffectivewhilethedoor
is open. Once the door is closed, the alarm function automati-
cally resets itself.
W Now briefly press the SuperFrost button to select/confirm the
function:
• For c = child lock press
the Up/Down button c1 = child lock to switch on o
c0 = child lockto switch off and
Temperature alarm (for freezer section)
-
Thisalwayssoundsifthefreezertemperatureisnotcoldenough
(it depends on the temperature setting).
confirm with the SuperFrost button.
When the symbol 7is lit, the child lock is active.
• For h = brillianceselect the
-
The temperature display flashes at the same time.
Up/Down button h1= minimum to
This can happen when
h5 = maximum brilliance select and
and confirm with the SuperFrost button.
-
-
warm, fresh food has been put into the freezer,
too much warm air gets in while you are sorting out the freezer
or removing items.
Quitting the setting mode:
W PresstheOn/Offbuttontoquitthesettingmode;theelectronics
setting switches after a period of 2 minutes.
Thetemperaturedisplaycontinuestoflashuntilthealarmsituation
has ended. It then switches from flashing to continuous light.The
audible signal is then automatically reset ready for operation.
-
Normal regulated operation is active again.
Fan bm
For cooling by circulated air. If necessary you can use the fan
switch if you have large amounts of food to cool down quickly, and
you want a relatively even temperature throughout the fridge com-
partment on all the shelves.An intensive circulation of air will stop
different areas of temperature from forming. All the food is cooled
evenly.We recommend using the fan when the room temperature
is hot (from approximately 30°C) or when the air humidity is high,
for example on hot summer days.
Net@Home
Depending on the model and the options, the ap-
pliance can also be equipped with an additional
connection for a retrofitted Net@Home module.
You can connect either a TeleSafe module or a
House-busModule.Youcanobtainthesemodules
from your dealer.
Note: To save energy, the fan automatically switches off when
the door is opened. Power consumption rises when the fan is
switched on.
SuperCool
For technical warranty reasons, the module must
be fitted only by customer services.
You can use the SuperCool button to switch the refrigerator to its
maximum cooling power.
We particularly recommend that when freezing large quantities of
food, drinks, freshly baked cakes or meals, they should be frozen
as quickly as possible.
You will find furtherinformation at our Internet site
W Switching on: Briefly press the SuperCool button blso that
it lights.
The cooling temperature goes down to the lowest value.
Note:“SuperCool”usesslightlymoreenergy.Howeverafterabout
6 hours, the electronics system automatically switches back
to normal power-saving operation.
If necessary you can also switch on the “SuperCool” function
earlier.
W Switching off: press again briefly, until the button light goes
out.
Power failure/”FrostControl” display
If a “nA”, symbol appears in the display, this means
that:
Thefreezingtemperaturehasrisentoohighduetoapowerfailure,
or a power cut during the last few hours or days.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Fridge section
Freezer section
Organising food storage
SuperFrost
The warmest part of the fridge is the top at the front and in the
door
Freshfood must be deep frozen as quickly as possible and frozen
food already in storage must have a “cold reserve”. This allows
the SuperFrost device to work. It is the best way of maintaining
the nutrition, appearance and taste of frozen food.
Information about keeping food cool
-
-
Store food in such a way that the air can circulate freely, i.e. do
not pack too tightly. Do not cover the ventilation grilles* on the
rear wall - this is important for the cooling capacity!
Always keep food that can give off or take on slight smells or
tastes, such as liquids, in airtight containers, or keep them
covered.
•
Only the maximum number of kilograms of fresh food as stated
on the type plate under “freezing capacity ...kg/24h“ should
be frozen in a 24 hour period, Fig. A3, item 4. This maxi-
mum amount for freezing depends on the model and climate
class.
Freezing with SuperFrost
Changing the layout
•
Briefly press the SuperFrost button 2 so that the LED lights
up.
W You can adjust the preserves
rack*andremoveallthedoorracks
for cleaning.Push up the rack, pull
forwards to remove, and reinstall
in reverse order.
The freezing temperature is reduced, and the appliance is
operating at the maximum freezing capacity.
•
If the amount you are freezing is fairly small, wait for approxi-
mately 6 hours. This is usually enough. If you are freezing the-
maximumquantity,seethetypeplateunderfreezingcapacity,
you should wait for approximately 24 hours.
W By shifting the bottle and pre-
•
-
Then place the fresh food inside, preferably in the upper draw-
ers.
serves rack you can secure
bottles from tipping out when you
SuperFrost switches off automatically. Depending on the
quantity stored, as required, at the earliest after 30 hours, and
maximum after 60 hours. Freezing is finished when the Super-
Frost LED has gone out - the appliance is now operating in
normal energy-saving mode.
open and close the door, to do this
make sure you always use the plastic retainer.!
You can move the retainer for cleaning: pull the lower edge of
the retainer forwards, and disengage it from the rack.
W You can adjust the shelves/
glass plates* to suit the height of
the food containers.
Note: Do not switch on SuperFrost:
-
-
if you are storing items that are already frozen,
if you are storing up to 2 kg of fresh food every day.
-
Lift up the glass tray pull out the
recesses above the tray and push
back in a higher or lower posi-
tion.
3
Freezing and storage information
•
The following are suitable for freezing: Meat, game, poul-
try, fresh fish, vegetables, fruit, dairy products, bread, cakes,
prepared meals.
2
1
-
An end stop prevents the glass
plates* from being pulled out in-
advertently.
The following are not suitable: lettuce, radishes, grapes,
whole apples and pears, fatty meat.
•
•
Suitable packing items arestandard freezer bags, re-usable
plastic, metal and aluminium containers.
W Use the front surface of the fridge base only for short term
food storage for example if you are moving things around,
or sorting out the fridge. This makes it easier to handle.
However do not allow items to stand, otherwise they will be
pushed back, or tip over when the door is closed.
Do not allow food about to be frozen to touch already frozen
items. Make sure the packs are dry to prevent them from freez-
ing together.
•
•
Always write the date and contents on the packs, and do not
store for longer than the recommended storage period in order
to maintain the quality.
Always pack food that you are freezing yourself into portions
to suit your household. Do not exceed the following quantities
in each pack, to ensure that the contents will freeze quickly to
the core:
2
1
R
L
2
L
R
-
-
•
Fruit, vegetables, up to 1 kg,
1
Meat, up to 2.5 kg.
After washing, blanch portions of vegetables (2-3 minutes
in boiling water, remove and plunge into cold water to cool. If
you use a steamer or microwave to blanch, please follow the
instructions for the appliance concerned).
•
•
Do not salt or season fresh food and blanched vegetables
before freezing. Other foods should be only slightly salted and
seasoned. The strength of the taste of some seasonings can
change.
W The half glass plates provide space for tall containers: Insert
the rails supplied onto the shelf notches at the desired height
on the left and right, checking that the right (R) and left (L) sides
are appropriately inserted! Slide in the glass plates 1/2.The
glass plate 2with the stopper edge must be at the back!
Donotfreezedrinksbottlesandcanscontainingcarbondioxide.
They might explode. If you wish to cool drinks very quickly,
always remove them from the freezer within one hour at the
latest!
18
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
For storage: Each drawer or storage shelf can be loaded with
The cold accumulators*
In the event of a power failure
thesepreventthetemperature
from rising too quickly - the
quality of the food is better
retained.
max. 25 kg of frozen food.
Always store the same type of food together, this means you
do not need to keep the door open for an unnecessarily long
time, and saves energy.
•
•
Do not exceed stated storage periods.
You can freeze and store the
cold accumulators either on
thefreezertrayorinthefreezer
compartment lid*.
GB
To defrost only remove the amount you need for now. You
should use defrosted food to make a meal as quickly as pos-
sible.
W Inserting the cold accu-
mulators:
You can defrost the frozen food:
-
-
-
-
in the oven/fan oven
Remove the topmost drawer.
Insert the cold accumulators
into the top rear of the freezer
section roof and engage in a
forward direction.
in the microwave
at room temperature
in the fridge, the coldness of the item is used to keep the food
cool.
W Removing the cold ac-
cumulators:
Remove the upper drawer.
Grasp the cold accumulator at
the side and push downwards.
The Information System*
Prepared
meals
Sausage
Bread
Ice cream
Fish
Pork
VarioSpace*
Mushrooms
Game
Vegetables
Fruit
Poultry
Beef/veal
Frozen food should be consumed within the recommended stor-
age periods.
The figures between the symbols shows the storage period in
months for each of several types of frozen food.
The storage periods shown here are guidelines for freshly frozen
food. It depends on the quality of the food and how it has been
handled prior to freezing as to whether the upper or lower limit
should apply. For fatty food, the lower value must always apply.
-
-
If you remove one of the drawers and the shelf, you can gain 2
drawers’ worth of space for larger items. For example you
can store poultry, large joints of meat and game without having
to split them, so you can keep the joint “whole”.You can store
cakes and packs of ice.
The freezer tray*
allows you to freeze berries, herbs, vegetables and other small
items separately. It stops
themfromfreezingtogether.
Take a drawer out as far as the stoph rand lift forwards
and upwards.
The item keeps its shape
to a great degree, and it is
-
-
Lift up the storage surface, forwards and upwards .
Toreplace,proceedinreverseorderz:proceedinreverseorder
simply push in the shelf as far as the stop.
then easier to divide them
into portions.
W Spread the frozen food
loosely onto the freezer
-
-
Appliances with NoFrost*:Always leave the bottom drawer-
inside the appliance.
tray
W Allow the items to freeze
Do not cover the vents on the rear wall when you take out the
upper drawer; this is important for the appliance to function
properly
through for 10 to 12 hours, then put them into a freezer bag or
container, and store in a drawer.
W To defrost, spread them out again alongside one another.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
W You should regularly clean the drain opening on the rear wall
behind the vegetable drawer. If necessary clean it out with
a soft thin object, such as a cotton bud or similar.
Defrosting, cleaning
Information about defrosting
The NoFrost system* automatically defrosts the appli-
ance.
W Then reconnect the appliance,or switch it back on.
Themoisturecreateddropsdowntotheevaporator,where
it is periodically defrosted and evaporated.
If the appliance is going to be out of use for an extended
period of time empty it of all its contents, remove the plug, and
clean it as described above and leave the appliance door open
to prevent odours from forming..
The automatic defrost function ensures that the freezer
compartment is always frost-free, and you save time and work
because there is no need to manually defrost the appliance.
Freezer compartment
ApplianceswithoutaNoFrostsystemcanformalayeroffrostand
iceafterextendedperiodsofuse,dependingonhowoftenthedoor
is opened, and the amount of “warm” food placed inside. This is
completelynormal.Howeverathicklayeroficewillincreasepower
consumption. For this reason you should defrost the appliance
regularly: Do not use an electric heater or steam cleaner, defrost
spray, open flames or metal objects to remove the ice. You can
cause injury to yourself and damage the appliance!
One day before you are going to defrost the freezer, switch it to
“SuperFrost”, to ensure that the food obtains a “cold boost”.
To defrost: Remove the plug or press the freezer on/off switch,
so that the temperature display goes out. If the display does not
go out, the child lock is on.
Faults - problems?
Ifafaultshouldoccurwhileitisinoperation,pleasecheckwhether
the fault might have been caused by an operating error, because
should this be the case, then you will be charged for the cost of
any repairs during the guarantee period.
Leave the drawers and the freezer door open while you are de-
frosting. Soak up any defrost water with a sponge or cloth.
You can fix the following faults yourself by checking for the likely
cause:
fault
- possible cause and remedy
The appliance is not working, the display is not lit
-
-
-
Has the appliance been switched on properly?
Is the plug inserted correctly in the wall socket?
Is the fuse in the plug working correctly?
Cleaning
W Beforecleaningyoushould,inprinciple,puttheappliance
out of operation. Remove the mains plug or remove the
fuses or trip the fuse switch.
The interior light does not go on
-
-
-
Has the refrigerator section been switched on?
Has the door been open for longer than 15 minutes??
The bulb is faulty.
W Manually wash the inside and the components with luke warm
water,andalittlewashing-upliquid.Donotuseasteamcleaner
- you can injure yourself and damage the appliance!
W Werecommendusingasoftclothandanall-purposedetergent
with a neutral pH value.
.Mains voltage
Caution! To prevent injury and material damage, any
repairs and replacements to the interior LED lights must
-
Do not use abrasive scourers, do not use undiluted detergent
and never use cleaning agents or chemi-
cal solutions containing sand, chloride or
acid.
be carried out only by customer services.
Careful-class1Mlaserbeam.Ifthecoverisopen,do
not look directly inside with an optical instrument.
The noise is too loud
W Make sure that the cleaning water does
not get into the drain, ventilation grille or
the electric parts. Rub the appliance dry.
-
-
Is the appliance firmly positioned on the floor, are nearby
kitchen units or objects vibrating as a result?
-
Do not damage or remove the type plate
inside the appliance - it is important for
customer services.
Make sure that bottles and containers are not touching.
It is normal for: trickling, bubbling or splashing sounds to
occur; these are from the coolant flowing through the coolant
circuit.
W The butter box* can be washed in the dishwasher, the shelves,
glass shelf and other components must be hand-washed.
W Remove the shelves as shown in the illustration:
A slight clicking will occur, this always happen when the
fridge motor switches itself on and off automatically.
A humming noise from the motor. This is a little louder for a
veryshorttimewhentheunitswitcheson. WhenSuperFrostis
switched on, when food has been recently stored or if the door
is open for a long period, the cooling capacity automatically
increases. A deep humming noise is caused by the noise of
air flowing through the fan.
-
Lift the glass shelf, pull out the recesses above the supports,
lower to one side, and remove at an incline.
Always insert the shelf surfaces with the stopper edge to the
rear and pointing upwards, otherwise food may freeze to the
back wall.
-
W If you want to remove the top door rack
(butterandcheesecompartment),always
lift it out together with its lid*! Then care-
fully push one side of the rack outwards,
until the lid pin is disengaged and the lid
can be removed to one side.
2
1
The alarm has sounded, the temperature is not low
enough
3
-
Isitpossiblethatyouhavestoredtoomuchfreshfood without
switching on SuperFrost? (see section on “SuperFrost”)
Is the door properly shut?
-
You can dismantle the racks and door
racks for cleaning - you can pull the strips
and side components away from the glass tray.
-
-
Is there sufficient ventilation?
Ensure that the vents are not blocked.
Is the ambient temperature too high? (see section on “Condi-
tions”)
-
Remove the protective film from all the decorative strips, fig.
-
20
Download from Www.Somanuals.com. All Manuals Search And Download.
-
-
Have you opened the appliance too frequently and for too
long?
Installation information
W The appliance can also be installed in a fitted kitchen.
If this is the case you first need to fit the kitchen unit door and
the niche in which the appliance will be positioned. These
are no longer required, because the fitted unit door is fitted to
the door of the appliance.
Wait to see if the appliance goes back to the required tem-
perature by itself.
appears on the display
-
Apowerfailureorpowercuthasoccurred,proceedasexplained
in the section entitled “Power cut/FrostControl display“
GB
The compressor runs for a long time
-
This is completely normal and necessary on energy-saving
models.Thespeedregulated*compressorswitchestoalower
speed when it requires a lower cooling capacity. Although this
means that the running timeincreases, to almost permanent,
in fact it is saving energy.
mm
550
min.
38
min.
38
Customer services and type plate
90°
Ifnoneoftheabovecausesispresent,andyoucannotfix
thefaultyourself,orifthetemperaturedisplayisshowing
“F0” to “F5” this means that: there is a fault. You should contact
your nearest customer services point (see directory enclosed).
Tell them of the fault message on your display and also the
min.200 cm²
Appliance designation 1
Index 2,
Serial no.. 3
ofthetypeplate.Thiswill
make it possible to pro-
vide fast and accurate
service. The type plate
is located inside the ap-
pliance to the left.
W Check the dimensions:
A
B
1769,5
1574,5
C
695
549
Keep the appliance
closed until customer
services can cometo
avoid any further loss
of cold.
ICN 30 1772-1778
IC 29
1574-1590
W Use a spirit level to ensure that the niche cupboard is level.
If necessary, even it out by using base cauls.The base and
walls of the kitchen unit must be at right angles to one an-
other.
W The fridge/freezer must be installed only inside solid kitchen
fittings.
W It is essential that the ventilation cross-sections are main-
tained:
-
-
The ventilation shaft at the rear of the unit must be at least 38
mm deep.
A minimum of 200 cm 2 is necessary for the ventilation cross-
sections at the base of the unit and the surrounding unit.In
general the following applies: the larger the ventilation cross
section, the more energy the appliance will be able to save.
Before starting the installation:
W Remove the mains cable holder from the back of the
appliance.
W Use a cord to lay the mains cable.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
You will also need the following tool for the installation: cordless
Torx screwdriver ®15, 20, 25, hexagon spanner 13.
W Set the fastening screws 9 on the opposite side, and
screw in briefly.
Replacing the door stop
W Screw out the door fastening screws bland place the
If necessary you can change the door stop, please see further
instructions from “installation information” onwards
hinges diagonally.
Caution Do not allow the hinges to fold inwards -
an injury could be caused!
W To make it easy to fit, push the appliance three-quarters
-
Use a cordless screwdriver - to fasten the screws.The
of the way into the niche. Open the door.
screws blare self-piercing.
W Use the plugs to seal bmthe former fastening holes.
W
Dismantle the closing damper :
W Fit the doors of the appliance onto the prefitted screws 9
and fasten the screws.
Refit the closing damper
2* :
Caution when dismantled the closing damper retracts!
W
W
Unscrew the holder
1
W
W
Screw
1
the holder back on
together with the closing damper
Un,sfcroremwtthheedboaollr,painnsd 3place to one side.
, together with the closing damper
2
Screw the ball pins 3
into the new fastener holes.
2
Caution: Do not pull the closing damper from the ball
pins. It could become damaged
W Refit all the cover components .
W Pull the cover components 5, 6, 7and 8forwards and
upwards with the aid of a slotted screwdriver.
W Simply loosen the fastening screws 9on the body of the
appliance at the top and bottom .
-
Push the doors outwards and take them off their hinges.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixing and assembly
Overview of all the components required
for installation, and their position on the
appliance
GB
All the fastening elements are supplied with the appliance.
W Fit the shim cl at the
centreoftheappliance:
Push into the rack
and hook into the key
holes.
W Screw the angle bracket dp
using the hexagonal screw
dqinto the predrilled holes
on the appliance door.
W Push the appliance three
quarters of the way into the
niche.
W Payattentiontothethickness
of the unit wall:
If the unit walls are 16 mm thick= the niche
should be 568 mm wide:
-
Glue the cover strip cnon the grip side and flush
with the side wall of the appliance: Remove the
protective film and the rubber gasket; if neces-
sary cut the rubber gasket to suit the
height of the niche.
-
-
Clip spacers coto each of the upper
and cplower hinges.
Push the appliance into the niche
until the spacers touch the back of
the unit.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
W Fit the fastener
traverse dm to the
unit door:
If the unit walls are 19 mm thick=
the niche should be 562 mm
wide:
-
Push the appliance into the niche
until the front edges of the hinges are
flush with the side walls of the unit, on
unitswith door stopper components
(burls, sealing lips etc.) please pay attention to the dimensions
of these! Allow the hinges to protrude by the amount of their
dimension.Pushtheapplianceagainst
the unit wall, hinge-side facing.
-
To do this screw off
the traverse above
the lock nuts dn.
-
Use the assembly
devices dl to sus-
pend the traverse
onto the inside of
the unit door align it
to the centre (draw
a short centre line
W Use the adjusting feet cq to align the
appliance, using the wrench supplied
cr so that it is positioned upright.
Make sure the body of the appliance
is parallel with the front edges of the
sides of the unit.
onto the unit door, bring the tip of the arrowon to it, the dis-
tances to the outer edge must be the same to the right and to
the left).
W Fasten the fastening traverse dmin the centre:
-
-
-
use at least 6 screws for chipboard doors,
use 4 screws at the edges on cassette doors.
Pull the assembly devices dlupwards and push them, at an
angle, into the receiving apertures.
W ScrewtheplasticbracketcsusingM5
screws ct on the handle side of the
appliance.
-
Align the bottom of the plastic bracket csflush with the front
edge of the floor of the unit.
If there are door stopper elements (burls, sealing lips etc.)
take account of the dimensions of these and align them to be
parallel with the front edge
of the hinge.
X
Z
W Screw the appliance into
the niche .
Y
-
Uselongchipboardscrews
to screw through the cu
hinge lugs at the top and
the bottom.
-
Use a long screw cuto prefit the central
slottedholeontheplasticbracketcs.Fold
back the cover on the plastic bracket, and
close the door of the appliance.
W Hinge the unit door onto the appliance door/adjusting pins do,
looselyscrewonthelocknutsdnontotheadjustingbolts.Close
the door.
W Check the distance of the door against the surrounding unit
doors.
-
Align the unit door to be flush with the surrounding unit doors:
Even the sides X by pushing, and the height Y and lateral
inclination, using the adjusting bolts do- with a screw driver.
Tighten the lock nuts dn.
Fitting the kitchen unit door
Note:You need the assembly devices dl for both doors.You
-
therefore need to fit the unit doors one after another.
W Screw the ap-
pliance door dp
onto the unit door
with the fixing
bracket em:
-
Makesurethetwo
metal edges are
flush, symbol //.
Then predrill the
fasteningholes(if
necessary use a
braddle to punch
holes)and screw
firmly.
W Check the presetting of 8 mm (distance between appliance
door and lower edge of traverse).
W Push the assembly devices dlto the height of the unit door,
lower edge of the stop ▲on the assembly device = upper edge
of the door to be fitted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
W Fit all the covers:
-
Position the upper covers dtand en-
gage them.
-
Position the side covers duas far as
the stop, then press the cover until it
engages with an audible click.
Push the cover elat the side, using a
screw driver, to pull the cover forward so
that it engages correctly.
Z
Z
-
GB
W Align the depth of the unit door Z :
-
-
top: loosen screws dr�
at the bottom: loosen the hexagonal
screws dq with the ring spanner sup-
plied dsand adjust the door.
=
=
W You can now adjust the end
stop spring on the doors. Make
the setting as required with the
allen key 5 supplied:
-
Allow an air gap of approximately 2 mm
between the unit door and the body of
the unit. Do not allow any burls or seal-
ing lips to touch - this is important for
correct function!
- turn clockwise
= stronger spring force,
- turn counter-clockwise
= weaker spring force (condi-
tion in which supplied).
W For large unit doors, fit a third pair of fas-
tener brackets dp.
To do this use the predrilled holes in the
handle area of the appliance door.
W Place the rest of the covers on
the hinges
_______________________________________________
The manufacturer is constantly developing and enhancing all
types and models. Please therefore understand that we reserve
the right to make changes to the shape, options and technology
used.
W Check that the doors are correctly seated and adjust if nec-
essary.Tighten all screws.
-
Tighten the lock nuts dnwith the ring spanner dshold the
adjusting bolts dowith a screwdriver as you do so.
W If necessary, adjust the shim cl by pushing it parallel to the
floor of the unit. It must not protrude.
W Fix the appliance underneath with the plastic bracket cs us-
ing a second screw cu to fasten it into the round hole.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
LIEBHERR Hausgeräte
Ochsenhausen GmbH
Memmingerstrasse 77-79
D-88416 Ochsenhausen
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating instructions
Page 4
GB
Ice maker
7080 333-02
AEWB 406
Download from Www.Somanuals.com. All Manuals Search And Download.
Theicemakerisfittedinthefreezercompartmentofthecombined
refrigerator-freezer.Itmustbeconnectedtothemainswatersupply
to work. The descriptions below only relate to the ice maker and
the water connection to a solenoid valve. All the instructions and
details for the appliance as a whole are set out in the enclosed
operating instructions for the combined refrigerator-freezer.
Instructions for trained personnel
Connection to the water supply
Please read the first three points of the safety instructions and
warnings before connecting the appliance to the mains water
supply.
The water pressure must be between 1,5 and 6 bar. The water
supply to the appliance must be through a cold water pipe that
can withstand the operating pressure and complies with the hy-
giene regulations. For this, use the stainless steel hose supplied
(length 1.5 m).
The floor on which the appliance stands should be horizontal
and level. To compensate for any unevenness, adjust the height
of the feet with the open-ended wrench supplied. The combined
refrigerator-freezer must stand level.
An extension hose of either 1.5 m or 3 m is available from the
customer service department which must be assembled by
a technician.
Safety instructions and warnings
• Do not make the water connection whilst the combined refrig-
erator-freezer is connected to the electricity supply.
• Theconnectiontothemainswatersupplymayonlybemade
A shut-off valve must be installed
between the hose line and the house
mainssupplysothatthewatersupply
can be stopped if necessary.
by a trained plumber.
• The water quality must comply with the drinking water di-
rectives of the country in which the appliance is used.
• The ice maker is designed exclusively to make ice cubes in
quantities required by a household and may only be operated
with water suitable for this purpose.
• All repairs and work on the ice maker may only be carried out
by customer service personnel or other trained personnel.
Connect the straight section of the
supplied stainless steel hose to the
shut-off valve. There is a screen and
seal in the connector.
• The first three batches of ice must not be consumed or
used. This applies both to using the appliance for the first
time and also to using it after it has not been used for a
lengthy period of time. This ensures that the water supply
is purged.
• Themanufacturercannotacceptliabilityfordamagecaused
by a faulty connection to the mains water supply.
Instructions for trained personnel
Position of the water connection
Connect the angled section of the
stainless steel hose to the solenoid
valve. The water connection to the
appliance is via the solenoid valve on
therearoftheappliance.Theconnec-
tion dimension is R 3/4.
Before the appliance is used for the first time the system must
be bled of any air by a competent person (i.e. Plumber)
1. Open the shut-off valve for the water supply and check
the entire water system for leaks.
2. Insert the mains plug for the combined refrigerator-
freezer into the socket.
3. Move the combined refrigerator-freezer into its intended final
position. Ensure that the water supply pipe is not damaged
or kinked as you do this.
Position of the water connection if a 1.5 m
hose is used. This hose is supplied with the
appliance as standard.
All equipment and devices used to supply the water to the
appliance must comply with the current regulations of the
country concerned.
Position of the water connection if a 3 m hose is used. This
hose is available from our customer service department.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GB
To start the ice maker
Cleaning the ice-cube tray
The ice maker will only work if the combined refrigerator-freezer
is connected to the electricity supply. It will only make ice cubes
if the freezer compartment is operating.
The ice maker is in the top left drawer in the freezer compartment
of the combined refrigerator-freezer. You can identify this drawer
by its labelling ”Ice maker”.
The ice-cube tray can be cleaned. Use the following method.
• The IceMaker must be switched on.
• Remove any ice cubes from the drawer.
• Hold the ”ON/OFF” button for 10 seconds (after 1 second the
IceMaker will switch off - the LED will go out).
• After you have held the ”ON/OFF” button for 10 seconds the
LED will start to flash for 60
seconds.
• Insert the drawer during
these 60 seconds. Then
theice-cubetraywillmove
into an angled position.
• Remove the drawer - the
ice-cube tray can now be
cleaned. The best way of doing
this is with warm water and a little
washing-up liquid.
To switch on
• Pull out the drawer.
• Press the ”ON/OFF”
buttonsothatthecontrol
lamp comes on.
• Close the drawer.
Note: The ice maker can
only make ice cubes if
the drawer is completely
closed.
• Press the ”ON/OFF” button and close the drawer. The IceMaker
will then immediately restart with its production of ice cubes.
To switch off
If you do not need any ice cubes the ice maker can be switched
off independently of the freezer compartment.
• Press the ”ON/OFF” button for approx. 1 second so that the
control lamp goes out.
This procedure should also be completed if you switch off the
IceMaker. This ensures that no water or ice will be left in the ice-
cube tray.
Note: If the ice maker is switched off, the empty drawer can
also be used to freeze and store food.
Malfunction
If a malfunction occurs during operation, check whether it is due
to an operating error.
To make ice cubes
After you start the ice maker for the first time it may take up to 24
hours before the first ice cubes are ready.
You may be able to rectify the following faults yourself:
• The ice maker cannot be switched on
- Is the combined refrigerator-freezer connected to the mains
electricity supply?
Please note that the first three batches of ice must not be
consumed or used.
The production capacity depends on the temperature inside the
freezer compartment. The lower the temperature, the more ice
can be produced over a period of time.
• The ice maker is not making any ice
- Is the ice maker switched on?
- Is the water supply line open?
- Is the ”Ice maker” drawer closed properly?
The ice cubes fall out of the ice maker into the drawer. When
the ice reaches a certain level in the drawer, the appliance stops
producing ice automatically.
If you are unable to rectify the fault yourself or if the control lamp
abovethe”ON/OFF”buttonflashes, contactourcustomerservice
department. Refer to the section headed ”Troubleshooting” in the
operating instructions for the combined refrigerator-freezer for
details of the type plate data you will be required to quote.
If you require a large quantity of ice you can swap the drawer to
the right with the complete ”Ice maker” drawer. When you close
the drawer the ice maker will immediately start production.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|