Pro4000 Series Quick Reference Guide
October 2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
3
Contents
Copying.........................................................................................26
Tips for copying..................................................................................................................26
Making copies.....................................................................................................................26
Making a two‑sided (duplex) copy automatically...............................................................26
Canceling copy jobs............................................................................................................27
Important safety information.........................................................2
About your printer..........................................................................5
Finding information about the printer.................................................................................5
Minimizing your printer's environmental impact.................................................................5
Printer models......................................................................................................................5
Printer features....................................................................................................................6
Setting up the printer...........................................................................................................6
Understanding the parts of the printer..............................................................................12
Using the printer control panel..........................................................................................14
Using memory cards and flash drives.................................................................................15
Scanning.......................................................................................28
Tips for scanning.................................................................................................................28
Scanning to a local computer.............................................................................................28
Scanning to a network folder.............................................................................................28
Scanning to a flash drive or memory card..........................................................................29
Scanning directly to e‑mail using the printer software......................................................29
Scanning to a PDF...............................................................................................................29
Canceling scan jobs.............................................................................................................30
Ordering and replacing supplies....................................................17
Ordering ink cartridges.......................................................................................................17
Replacing ink cartridges......................................................................................................17
Maintaining ink cartridges..................................................................................................18
E-mailing.......................................................................................31
Sending e-mail....................................................................................................................31
Canceling an e‑mail............................................................................................................31
Using the printer software............................................................19
Supported operating systems.............................................................................................19
Installing the printer software............................................................................................19
Using the Windows printer software.................................................................................20
Using the Macintosh printer software...............................................................................20
Setting up the printer to fax..........................................................32
Step 1: Connect the printer to the telephone line.............................................................32
Step 2: Check the dial tone.................................................................................................39
Step 3: Set your fax name and fax number........................................................................39
Step 4: Set the printer to receive faxes automatically or manually...................................39
Step 5: Set the number of rings..........................................................................................40
Step 6: Create a contact list................................................................................................40
Printing.........................................................................................22
Recommended paper brands.............................................................................................22
Printing a document...........................................................................................................23
Printing using advanced color options...............................................................................23
Printing on both sides of the paper (duplexing) automatically..........................................23
Printing photos from a memory card or flash drive...........................................................24
Printing documents from a memory card or flash drive....................................................24
Canceling print jobs............................................................................................................24
Printing from a mobile device............................................................................................25
Faxing...........................................................................................41
Sending faxes......................................................................................................................41
Receiving faxes...................................................................................................................41
Wireless networking.....................................................................43
Information you will need during wireless setup...............................................................43
Installing the printer on a wireless network.......................................................................43
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
What is Wi‑Fi Protected Setup?.........................................................................................44
4
Configuring Wi‑Fi Protected Setup manually.....................................................................44
Using the Embedded Web Server..................................................46
Accessing the Embedded Web Server................................................................................46
Understanding the home page...........................................................................................46
Customizing printer settings...............................................................................................46
Using shortcuts.............................................................................48
What are shortcuts?...........................................................................................................48
Getting started...................................................................................................................48
Troubleshooting............................................................................50
Notices.........................................................................................60
Edition notice.....................................................................................................................60
Index............................................................................................61
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
5
Conserving paper
About your printer
• Print more than one page image on one side of the paper. The Pages per Sheet feature allows you
to print multiple pages on one sheet. You can print up to 16 page images on one side of a sheet of
paper.
Finding information about the printer
The Quick Reference Guide contains instructions on adding your printer to a wireless network, setting up
a fax connection, and accomplishing common printer tasks like printing, copying, scanning, and faxing. It
also includes information on troubleshooting printer setup issues as well as solving basic networking and
faxing problems.
• Print on both sides of the paper. Two‑sided printing (duplexing) lets you print on both sides of the
paper manually or automatically (depending on your printer model).
• Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print
Preview dialog, or the printer display (depending on your printer model).
• Use recycled paper.
• Reduce the margins of documents to be printed.
Note: Some functions are available only in select printer models.
• Scan and save. To avoid printing multiple copies, you can scan documents or photos and save them
to a computer program, application, or flash drive for presentation (depending on your printer model).
For additional information, see the following:
What are you looking for?
Find it here
Conserving ink
Initial setup instructions
• Quick Setup Sheet
• Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than
• Hardware Setup Wizard1
normal and are recommended for printing documents that are mostly text.
User’s Guide2
Additional setup and instructions for using the
printer
• Use font types and font settings that require less ink. Most programs or applications let you adjust
the darkness of the colors.
Help using the printer software
Software Help installed automatically with the printer
software.2 Click Help from any printer software program or
application.
• Use high‑yield cartridges. Inks in high‑yield cartridges allow you to print more pages.
• Preview print jobs before printing. Use the preview features found in Toolbars, the Print Preview
dialog, or the printer display (depending on your printer model).
online customer support, and telephone
support
Recycling
• Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To
postage‑paid bag.
1 Available on the Software and Documentation CD.
2 Available on the Software and Documentation CD and on the Lexmark Support Web site at
• Recycle the product packaging.
• Recycle your old printer instead of throwing it away.
• Recycle paper from discarded print jobs.
• Use recycled paper.
Minimizing your printer's environmental impact
We are committed to protecting the environment and are continually improving our printers to reduce
their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your
printer's environmental impact even further.
Note: Your printer may not come with some of these programs or some of the functions of these
programs, depending on the features of the printer that you purchased.
Conserving energy
• Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum‑power standby
Printer models
mode after the printer has been idle for a set amount of time (the Sleep timeout).
The installation software CD that came with your printer works for the following printer models:
• Reducethescreen brightness. Dimthe printer display to lower the power consumption ofyourprinter.
• Pro4000
• Pro4000c
computers, thus conserving energy and other resources.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
6
Printer features
Setting up the printer
Depending on the model, your printer comes with features that will help you manage and accomplish
printing and imaging tasks:
1 Unpack the printer.
• Wireless or Ethernet networking—Print and scan from anywhere in your home or office over a secure
wireless or Ethernet network, as well as share the printer among multiple computers.
• Intuitive touch screen—Use the full‑featured color touch screen for fast, easy access to all the printer
menus. The large screen also allows you to view and print photos directly from your digital camera or
memory device without using a computer.
• Print—Print documents and PDFs quickly from a computer or from a USB flash drive. Built‑in two‑sided
printing lets you save money and the environment.
• Copy—Copy documents and photos with one‑touch, computer‑free black or color copying. Enjoy 25%
to 400% reduction and enlargement capacity.
• Scan—Scan documents and photos fast and easily with the high‑resolution scanner. Easily scan to a
memory device or to multiple laptops or PCs over a secure wireless network with up to 1200 dpi optical
resolution.
• Fax—Do standalone black and color faxing at 33.6Kbps modem speed. Other fax features include 99
speed dials, automatic redial, junk fax blocking, and caller ID.
• Photo printing—Print high‑quality, long‑lasting photos directly from digital memory cards,
PictBridge‑enabled digital cameras, and USB flash drives.
Notes:
• SmartSolutions—Simplify printer tasks that you frequently repeat by creating and customizing your
printer solutions. Using the SmartSolutions toolkit on the Web, you can choose the printer tasks that
you often perform, apply your custom settings, and download them to your printer as shortcuts that
you can easily access anytime. You can also customize your printer with solutions that display your
online calendars, online photo albums, RSS feeds, and more.
• Do not attach the USB cable until prompted to do so.
• Place the printer near the computer during setup. If you are setting up on a wireless network,
then you may move the printer after setup is complete.
• Contents may vary by model and region.
• Shortcuts—Save a set of frequently used printer settings available for a given task and then assign a
shortcut name and shortcut number to it. When you want to perform a task with those settings, you
can simply select the shortcut number on the printer instead of going through the usual process of
adjusting the settings and options.
2 To initiate printer setup using a computer, insert the installation software CD, or download the printer
driver.
• Eco‑Mode—Save energy and paper by activating Eco‑Mode. It automatically dims the printer display
light, puts the printer into Sleep mode after a specified period of inactivity, and prints on both sides
of the paper for print, copy, and fax jobs.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
7
4 If necessary, insert the correct language overlay until it clicks into place.
With a CD or DVD drive (Windows/Macintosh)
Without a CD or DVD drive or for Linux
Download the printer driver from
5 Pull the paper tray completely out of the printer.
Note: If the installation dialog does not appear after a
minute, then see “Installation screen did not appear during
installation” on page 50.
3 Remove tape and packing material from all areas of the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
8
6 Move the paper guides to the sides.
9 Adjust the paper guides to rest against the left, right, and bottom edges of the paper.
2
1
1
1
2
1
2
7 For legal‑size paper, extend the paper tray.
1
2
3
Note: Make sure the paper is below the maximum fill line located on the edge of the paper tray.
Overloading the tray can cause paper jams.
2
8 Load paper with the printable side facedown.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
9
10 Insert the paper tray.
12 Make sure the printer is on.
Note: It may take a while before the first screen appears on the printer control panel.
13 Using the printer control panel, press the up or down arrow button until the language you want is
OK
highlighted on the display, and then press
.
11 Connect the power cord only.
Note: Do not attach the USB cable yet.
OK
14 Confirm the language, and then press
.
Connect the power cord to a properly grounded electrical outlet that is near the product and easily
accessible.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
10
OK
OK
15 Set the country or region, and then press
.
18 Set the time zone, and then press
.
Time Zone
Country/Region
(UTC-05:00) Eastern Time (USA/Ca...
(UTC-06:00) Central Time (USA/Ca...
(UTC-07:00) Mountain Time (USA/C...
United States
Albania
Algeria
Please choose
a
country or region and press OK
Please choose
a
time zone and press OK
16 Using the keypad on the printer control panel, set the date. Press the left or right arrow button to
Note: This step appears only in some countries.
OK
scroll between the month, day, and year. Press
.
19 To configure basic fax functions, press the left or right arrow button until Nowis highlighted, and then
OK
Note: The date format varies, depending on the selected country or region.
press
. Otherwise, go to step 22.
Fax Setup
Set Date
18
01
2011
Do you want
to set up fax now?
/
/
Press OK when complete.
Now
Later
OK
OK
17 Set the time, and then press
.
20 Enter your fax number for the printer, and then press
. Your fax number identifies you as the sender
in all your sent faxes.
Set Time
Fax Number
05
55
AM
:
Press OK when
complete.
Enter Fax Number and press OK
OK
21 Type your name or company name, and then press
. Your fax name identifies you as the sender in
all your sent faxes.
• To change a character, press the left arrow button.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
• To add a space, press the number 0.
11
24 Remove all packing material.
Fax Name
Enter Fax Name and press OK
22 Configure other advanced fax settings later in the software installation.
Lexmark Pro4000 Series Installation
ll
i
i
25 Insert each ink cartridge until it clicks into place.
Configure Advanced Features
You can now print, but there are additional steps required to access all the
features of your device.
SD/MS/xD/MMC
Get my printer ready to scan directly to my computer
Configure Lexmark SmartSolutions and standalone email
Get my printer ready to send and receive faxes
What will
How can
I
be missing if
do this later?
I
don’t do this now?
I
Quit
Continue
?
23 Flip down the ink cartridge access door.
Note: Make sure to use the four ink cartridges that came with your new printer.
26 Close the ink cartridge access door.
SD/MS/xC
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
12
Behind the ink cartridge access door, you will find the customer support label, which contains the ink
cartridge information, model number, product Web site, and customer support number.
Understanding the parts of the printer
1
Note: Do not open the ink cartridge access door during the 12‑minute printhead preparation.
2
27 Fully extend the exit bin and flip out the bin extender.
11
S
D
/M
S
/xD/M
M
C
10
3
5
4
OK
28 From the printer control panel, press
to print an alignment page.
9
8
6
7
Use the
To
1
2
Automatic Document
Feeder (ADF)
• Scan, copy, or fax multiple‑page documents.
• Access ADF paper jams.
ADF input tray
Load original documents into the ADF.
Notes:
• Do not load postcards, photos, small items, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner
glass.
Notes:
• After scanning, copying, or faxing, you can lift the right end of the
input tray to retrieve the original documents easily.
• The alignment page prints.
• Do not remove the page until printing is finished. The alignment page may take a while to print.
• Streaks on the alignment page are normal and not an indication of a problem.
• The alignment page that prints may differ from the one shown.
• Recycle the alignment page.
3
4
PictBridge and USB
port
Connect a PictBridge-enabled digital camera or a flash drive to the printer.
Card reader light
Check the card reader status. The light comes on when a memory card is
inserted and blinks when a memory card is being accessed.
5
6
Memory card slot
Insert a memory card.
Ink cartridge access
door
Install, remove, or replace ink cartridges.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
13
Use the
To
Use the
To
7
8
Paper tray (Tray 1)
Load paper.
16
USB port
Connect the printer to a computer using a USB cable.
Warning—Potential Damage: Do not touch the USB port except when
plugging in or removing a USB cable or installation cable.
Second paper tray
(Tray 2)
Load additional paper.
You can load the same type of paper as in Tray 1. You can also load a different
typeof paperand change thedefaultpaper settings sothe printer usespaper
from Tray 2 for certain types of print jobs.
Note: Remove the sticker to access the port.
Note: This option is
available only in select
printer models.
17
18
Ethernet port
LINE port
Connect your printer to a computer, a local network, an external DSL, or a
cable modem.
9
Exit bin
Hold paper as it exits.
Connect the printer to an active telephone line through a standard wall jack
(RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows you to
access the phone line to send and receive faxes.
Note: For the printer to be ready for any print job, make sure to fully
extend the exit bin and to flip out the bin extender.
10
11
Bin extender
Printer control panel
Catch the paper as it exits.
Note: For the printer to be ready for any print job, make sure to fully
extend the exit bin and to flip out the bin extender.
Operate the printer.
19
EXT port
Connect additional devices (telephone or answering machine) to the printer
and the telephone line. Use this port if you do not have a dedicated fax line
for the printer and if this connection method is supported in your country
or region.
19
18
Note: Remove the plug to access the port.
S
D
/M
S
/x
D
/M
M
C
17
13
14
12
16
15
Use the
To
12
Customer support
label
Identify the model number of the printer, the customer support hot line,
and the ink cartridge information.
13
14
15
Scanner glass
Scan, copy, or fax photos and documents.
Power supply with port Connect the printer to the power cord.
Duplex unit
• Print on both sides of a sheet of paper.
• Access paper jams.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
14
Use
To
• Return to the previous screen.
Using the printer control panel
6
7
Back
2
3
1
4
• Exit from one menu level to a higher one.
5
Select
• Select menu options.
• Save settings.
OK
13
12
14
7
6
11
Use
To
• Turn the printer on and off.
• Switch to Sleep mode.
Note: When the printer is on, press
and hold for three seconds to turn off the printer.
View:
10
9
1
2
Power
to switch to Sleep mode. Press
8
Display
• Printer status
• Messages
• Menus
Note: The display is
turned off in Sleep
mode.
15
16
17
3
4
Arrow buttons
Home
Navigate through menu items that appear on the display.
Return to the home screen.
Use
To
8
9
Redial
Display the last number dialed. Press the left or right arrow button to view the
last five numbers dialed.
5
Keypad
In Copy mode or Photo mode:
Enter the number of copies or prints you want to make.
In Fax mode:
Pause
Insert a three-second pause in a fax number to wait for an outside line or get
through an automated answering system. Enter a pause only when you have
already begun entering the number.
• Enter fax numbers.
• Operate an automated answering system.
• Select letters when creating a Speed Dial list.
• Type numbers to enter or edit the date and time shown on the display.
10
Dial Tone
Dial the telephone number manually using the keypad before sending the fax.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
15
Use
To
Using memory cards and flash drives
11
12
Address Book
Access fax numbers from a saved list of numbers.
Supported memory cards and file types
Color
Switch to color mode.
Memory card
File type
Documents:
• Secure Digital (SD)
• .pdf (Adobe Portable Document Format)
Images:
• Secure Digital High Capacity (SDHC)
• Micro Secure Digital (with adapter) (Micro SD)
• Mini Secure Digital (with adapter) (Mini SD)
• MultiMedia Card (MMC)
13
14
Black
Start
Switch to black‑and‑white mode.
• .jpg, .jpeg, .jpe (Joint Photographic Experts
Group)
Start a job, depending on which mode is selected.
• .tiff, .tif (Tagged Image File Format)
• Reduced Size MultiMedia Card (with adapter)
(RS‑MMC)
• MultiMedia Card mobile (with adapter)
15
16
17
Cancel
• Cancel a print, copy, scan, or fax job in progress.
(MMCmobile)
• Clear current settings or error messages, and return to previous settings.
• Memory Stick
• Memory Stick PRO
Ethernet indicator Check the Ethernet connection of your printer.
• Memory Stick Duo (with adapter)
• Memory Stick PRO Duo (with adapter)
• xD‑Picture Card
• xD‑Picture Card (Type H)
• xD‑Picture Card (Type M)
Wi‑Fi indicator
Check the wireless connection of your printer.
Note: This feature may be available only in select printer models.
Using a memory card or flash drive with the printer
Insert a memory card into the card slot or a flash drive into the USB port.
Download from Www.Somanuals.com. All Manuals Search And Download.
About your printer
16
Notes:
• If the printer does not recognize the memory device, then remove and reinsert it.
• The printer reads only one memory device at a time.
Inserting a memory card
Inserting a flash drive
VE
DRI
H
S
FLA
Notes:
Notes:
• Insert the card with the brand name label facing
up.
• The flash drive uses the same port that is used
for a PictBridge camera cable.
• Make sure any arrows on the card point toward
the printer.
• An adapter may be necessary if your flash
drive does not fit directly into the port.
• If necessary, connect the memory card to the
adapter that came with it.
• Make sure that the memory card inserted is
supported by the printer. For more information,
see “Supported memory cards and file types” on
page 15.
• The card reader light comes on when a memory
card is inserted and blinks when a memory card is
being accessed.
Warning—Potential Damage: Do not touch
any cables, ports, any network adapter, any
connector, the memory device, or the printer
in the areas shown while actively printing,
reading, or writing from the memory device.
A loss of data can occur.
Follow the instructions on the printer display or select from available options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering and replacing supplies
17
2 Open the ink cartridge access door.
Ordering and replacing supplies
Ordering ink cartridges
S
D/MS/xD
MC
Order the cartridges that are designed for use in your region.
• Region 1: For the United States, Canada, and Latin America, use 200, 200XL, or 200XLA cartridges.
• Region 2: For the European Union (EU), the European Economic Area (EEA), and Switzerland, use 210,
210XL, or 200XLA cartridges.
2
1
• Region 3: For Africa, the Middle East, Central Eastern Europe (non‑EU), the Commonwealth of
Independent States (CIS), and the Asia Pacific region, use 220, 220XL, or 200XLA cartridges.
Warning—Potential Damage: Do not extend the ink cartridge access door beyond 90 degrees
when opening to prevent it from breaking.
3 Press the release tab, and then remove the used ink cartridge or cartridges.
1 Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or
Notes:
4 Insert each ink cartridge until it clicks into place.
• To get more ink, order high‑yield ink cartridges.
SD/MS/xD/MMC
• You can order a mix of standard ink cartridges and high‑yield ink cartridges, depending on your
needs.
• The cartridges used for printing documents can also be used for printing photos.
• For best results, use only genuine Lexmark ink cartridges.
Replacing ink cartridges
Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges
immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.
Note: Install the new ink cartridges immediately after removing them from the packaging to avoid
exposing the ink to air.
1 Turn on your printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Ordering and replacing supplies
18
5 Close the ink cartridge access door.
OK
3 Press the up or down arrow button to scroll to a cleaning option, and then press
.
Wait until the printer is ready.
Notes:
OK
• If Align Printerappears on the printer display, then touch Continue or press
on your printer model.
, depending
Moving the printer to another location
• Do not remove the alignment page until printing is finished.
When moving the printer and optional trays to another location, follow these precautions:
• Any cart used to move the printer must have a surface able to support the full footprint of the printer.
Any cart used to move the options must have a surface able to support the dimensions of the options.
Maintaining ink cartridges
In addition to the following tasks that you can perform, your printer performs automatic maintenance
cycles if it is plugged into a properly grounded, working electrical outlet. It will briefly come out of Sleep
mode or will temporarily turn on if it is turned off.
• Make sure the bin extender and the exit bin are in their original positions.
• Keep the printer in an upright position.
• Make sure to remove the ink cartridges from the printer.
• Store the used ink cartridges in a box with the nozzles faceup.
Aligning the printhead
If the characters or lines on your printed image appear jagged or wavy, then you may need to align the
printhead.
1 Load plain paper.
2 From the printer control panel, navigate to:
OK
OK
OK
> Setup >
>Maintenance >
> Align Printer >
An alignment page prints.
Note: Do not remove the alignment page until printing is finished.
If you aligned the cartridges to improve print quality, then print your document again. If print quality has
not improved, then clean the printhead nozzles.
Cleaning the printhead nozzles
If you have not been using the printer for a long period, then you may need to clean the printhead nozzles
to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical
outlet to allow it to perform automatic maintenance cycles.
Notes:
• Cleaning the printhead nozzles uses ink, so clean them only when necessary.
• Avoid severe jarring movements.
• Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.
• If available, use the original packaging of the printer with the needed padding to keep the printer
protected during transport.
• If the ink levels are too low, then you must replace the ink cartridges before you can clean the
printhead nozzles.
1 From the printer control panel, navigate to:
OK
OK
> Setup >
> Maintenance >
2 Press the up or down arrow button to scroll to Clean Printheador Deep Clean
OK
Printhead, and then press
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the printer software
19
• Solaris SPARC x86 10*
Using the printer software
Note: Information on additional operating system versions that are compatible with the printer may be
available on our Web site.
Supported operating systems
The printer software requires up to 500MB of free disk space.
Installing the printer software
• Microsoft Windows 8
• Microsoft Windows Server 2012
Notes:
• Microsoft Windows 7 (SP1)
• If you installed the printer software on the computer before but need to reinstall the software,
then uninstall the current software first.
• Microsoft Windows 7
• Microsoft Windows Server 2008 (R2)
• Microsoft Windows Server 2008 (SP1)
• Microsoft Windows Server 2003 (SP2)
• Microsoft Windows Server 2003 (SP1)
• Microsoft Windows Vista (SP1)
• Close all open software programs before installing the printer software.
1 Obtain a copy of the software installer package.
• From the Software and Documentation CD that came with your printer.
• From our Web site:
SUPPORT & DOWNLOAD > select your printer > select your operating system
• Microsoft Windows Vista
• Microsoft Windows XP (SP3)
2 Double‑click the software installer package.
Wait for the installation dialog to appear.
• Microsoft Windows XP (SP2)
• Macintosh Intel OS X version 10.8.0 or later*
• Macintosh Intel OS X version 10.7.0 or later
• Macintosh Intel OS X version 10.6.0 or later
• Macintosh Intel OS X version 10.5.0 or later
• Macintosh Intel OS X version 10.4.4 or later*
• Macintosh PowerPC OS X version 10.5.0 or later
• Macintosh PowerPC OS X version 10.4.0 or later*
• Debian GNU/Linux 6.0 and 5.0*
If you are using a Software and Documentation CD and the installation dialog does not appear, then
do the following:
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe> OK.
In Windows 7 or earlier
• Fedora 17, 16, 15, and 14*
• Linpus Linux Desktop 9.6*
• Linux Mint 12*
• Linux openSUSE 12.1, 11.4, 11.3, and 11.2*
• Red Flag Linux Desktop 6.0*
a
b
c
Click
or click Start, and then click Run.
In the Start Search or Run dialog, type D:\setup.exe.
Press Enter, or click OK.
Note: Dis the letter of your CD or DVD drive.
• Red Hat Enterprise Linux WS 6, WS 5, and WS 4*
• SUSE Linux Enterprise Desktop 11 and 10*
• SUSE Linux Enterprise Server 11 and 10*
• Ubuntu Linux 12.04, 11.10, 11.04, 10.10, 10.04, 9.10, and 9.04*
• HP‑UX 11.31, 11.23, and 11.11*
In Macintosh
Click the CD icon on the desktop.
3 Click Install, and then follow the instructions on the computer screen.
• IBM AIX 7.1, 6.1, 5.3, and 5.2*
• Solaris SPARC 10, 9, and 8*
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the printer software
20
Use the
To
Using the Windows printer software
Software installed during printer installation
Printing Preferences
When you click File > Print> Properties with adocument open, aPrinting
Preferences dialog appears. The dialog lets you select options for the
print job, such as the following:
When you set up the printer using the installation software CD, all the necessary software was installed.
You may have chosen to install some additional programs. The following table provides an overview of
various software programs and what they can help you do.
• Select the number of copies to print.
• Print two‑sided copies.
• Select the paper type.
• Add a watermark.
If you did not install these additional programs during initial installation, then reinsert the installation
software CD, run the installation software, and then click Advanced Options > Install Additional Software.
• Enhance images.
• Save settings.
Printer software
Note: Printing Preferences is installed automatically with the printer
software.
Use the
To
• Launch applications or programs.
LexmarkTM Printer Home
Note: Your printer may not come with some of these programs or some of the functions of these
(referred to as Printer Home)
programs, depending on the features of the printer that you purchased.
• Scan or e‑mail a photo or document.
• Edit scanned documents.
• Scan documents to PDF.
• Adjust settings for the printer.
• Order supplies.
Using the Macintosh printer software
Launching the Print dialog
Use the Print dialog to adjust the print settings and schedule print jobs.
• Maintain ink cartridges.
• Register the printer.
• Contact technical support.
• Access the User's Guide.
With a document or photo open, choose File > Print.
Launching an application
1 From the Finder, navigate to:
Lexmark Phone Book
Manage your fax contacts.
(referred to as Phone Book)
Abbyy Sprint OCR
Scan a document and produce text that you can edit with a
word‑processing program.
Applications > select your printer folder
2 Double‑click the application that you want to use.
Lexmark Wireless Setup Utility
• Set up the wireless printer on a wireless network.
(referred to as Wireless Setup
Utility)
• Change the wireless settings of the printer.
Use the
To
• Customize settings for fax jobs.
Note: This program is installed automatically with the printer software
if the printer has wireless capability.
Printer Settings
• Create and edit the Contacts list.
Lexmark Tools for Office
Access your favorite settings in Microsoft Office 2007.
• Configure e‑mail connectivity settings.
• Configure the language, country, date, and time.
(referred to as Tools for Office)
Printer Setup Utility
Status Messenger
Configure the fax and e‑mail settings of your printer.
Shortcuts
Speed up usual tasks with your printer.
Learn more about the printing problems encountered.
Wireless Setup
Assistant
Set up the printer on a wireless network.
Status Monitor Center
• Check the supplies status of your printer.
• Order supplies online.
Note: This application is automatically installed with the printer software if the
printer has wireless capability.
Uninstaller
Remove the printer software from your computer.
Product Update
Receive automatic notifications of updates to your printer software
when new updates are available.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the printer software
21
Notes:
• Your printer may not come with these applications, depending on the features of the printer that
you purchased or the installation type (standard or custom) chosen when you installed the printer.
• To take advantage of the full features of your printer, select the custom install option during
installation, and then select all packages listed.
Accessing Web links
Web links are links to predefined Web pages that are saved in the printer folder.
1 From the Finder, navigate to:
Applications > select your printer folder > Web Links
2 Double‑click the Web link that you want to visit.
Use
To
Customer Support
Lexmark Software Updates
Lexmark Online
Contact customer support.
Download and install the latest printer software.
Visit the Lexmark Web site.
Order ink or supplies.
Order Supplies Online
Printer Registration
Visit Lexmark SmartSolutions
Register your printer.
• Visit the SmartSolutions Web site.
• Choose your custom solutions.
Note: Your printer may not come with these Web links, depending on the features of the printer that
you purchased.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
22
For photos, brochures, business cards, iron‑on transfers, window clings, and other specialty
Printing
print jobs
Paper and
specialty
media
One‑sided or
two‑sided
printing
Recommended paper
Set paper type to
Recommended paper brands
Lexmark PerfectFinishTM Photo
Lexmark Photo
Photo
One‑sided
Lexmark PerfectFinish Photo
Lexmark Photo
For e‑mails, received faxes, internal documents, and similar print jobs
Size
Recommended paper
Weight
Set paper type to
Matte
brochure
Two‑sided
Inkjet matte brochure papers for
light‑ or moderate‑coverage
printing:
Inkjet Matte Brochure
Letter
PrintWorks 30% Recycled
Multipurpose Paper #00011
20 lb
Plain
• Printworks Matte Photo Paper
#00471
80 g/m2
A4
UPM Future Multitech
Plain
• Paperworks Inkjet 2‑sided
Matte Coated 8.5x11 32lb/120g
60pk P/C: PPPJJ32‑2
For colorful and high‑coverage documents
Size
Recommended paper
Weight
Set paper type to
Inkjet matte brochure paper for
heavier‑coverage printing:
• Paperworks Inkjet 2‑sided
Matte Coated 8.5x11 44lb/165g
60pk P/C: PPPJJ44
Letter
Georgia Pacific Everyday Ink 24 lb
Jet and Laser Paper #214305
ColorLok Certified Plain
Hammermill Ultra Premium 24 lb
Laser Print #16600‑0
Note: For best results, set
Page Dry Time to Extended.
Premium Plain
Glossy
brochure
Inkjet Glossy Brochure
Business Card
• Red River Zeppelin SemiGloss
• Paperworks Inkjet 2‑sided
Semi‑Gloss P/C:PPPJJ48 and
Manufacturer #:JANUSSM8511
Georgia Pacific Premium
20 lb
Colorlok Certified Plain
Premium Plain
MultipurposePaper #214306
Avery
specialty
• Avery Half‑Fold Greeting Cards
90 g/m2
A4
M‑Real Data Copy Colour
for Inkjet Printers #3265
Printing
• Avery Tri‑Fold Brochures for
Note: For best results, set
Page Dry Time to Extended.
Inkjet Printers #8324
• Avery Two‑Side Printable Clean
Edge Business cards for Inkjet
Printers #8871
80 g/m2
SOPORCEL Navigator
Universal Multifunctional
Premium Plain
Iron‑on
One‑sided
Avery T‑shirt Transfers for Inkjet
Iron‑On Transfer
transfer
Printers #3271
For résumés, letterhead documents, and similar print jobs
Clear window
cling
MicroFormat, Inc., Super Color Cling Transparency
#SP5676
Size
Recommended paper
Weight
Set paper type to
Letter
Wausau Professional Series 24 lb
Royal Linen paper, 30%
recycled, #WAU74089
Premium Plain
Transparent
film
3M Inkjet Transparency Film
#CG3480
Transparency
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
23
6 Click OK to close any printer software dialogs.
Printing a document
7 Click OK or Print.
For Windows users
For Macintosh users
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
1 With a document open, choose File > Print.
2 From the printer pop‑up menu, choose your printer.
3 From the print options pop‑up menu, choose Quality & Media > Advanced Options.
3 Select the print quality, the number of copies to print, the type of paper to use, and how the pages
should print.
4 Click OK to close any printer software dialogs.
4 From the “Ink to Use” pop‑up menu, choose either of the following:
• Color + Black to use four inks including black.
5 Click OK or Print.
• Color Only to use cyan, magenta, and yellow inks.
For Macintosh users
5 From the Color Preferences area, choose Natural or Vivid, or choose Use ICC Test Chart Process.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
3 Click OK.
6 Click Print.
Printing on both sides of the paper (duplexing)
automatically
4 From the menu bar, choose File > Print.
5 From the Printer pop‑up menu, choose your printer.
The automatic duplex unit supports A4‑, A5‑, letter‑, legal‑, statement‑, and executive‑size paper.
6 From the print options menu, choose the print quality, the number of copies to print, the type of paper
to use, and how the pages should print.
Notes:
7 Click Print.
• Other paper sizes may be supported.
• Two-sided printing is not supported on envelopes, card stock, or photo paper.
• Do not remove the page until printing is finished.
Printing using advanced color options
Color printing is enabled by default. To optimize print colors for a special print job, use Color Preference
and Advanced Color Options.
For Windows users
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
For Windows users
3 Navigate to:
1 With a document open, click File > Print.
2 Click Properties, Preferences, Options, or Setup.
Layout tab > Print on Both Sides (Duplex) area > select Print on both sides
4 Click OK to close any printer software dialogs.
3 Navigate to:
5 Click OK or Print.
Quality tab > Color Extras area
To return to single-sided printing, repeat steps 1 and 2, and then navigate to:
Layout tab > Print on Both Sides (Duplex) area > select Print on one side only
4 Select either Color Preference or Advanced Color Options.
• If you select Color Preference, then select either Natural or Vivid.
• If you select Advanced Color Options, then select Use ICC test Chart Process.
For Macintosh users
5 From the “Ink to Use” area, select either of the following:
• Color + Black to use four inks including black.
1 With a document open, choose File > Page Setup.
2 From the Page Setup dialog, set the printer, paper size, and orientation.
• Color Only to use cyan, magenta, and yellow inks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
24
3 Click OK.
OK
3 Use the up or down arrow button to select a photo printing option, and then press
.
4 From the menu bar, choose File > Print.
• Select and Printallows you to choose a layout, the number of photos per page, paper
settings, photo size, photo quality, and to sharpen the quality of graphics.
5 From the Printer pop‑up menu, choose your printer.
6 From the print options pop‑up menu, choose Quality & Media.
7 From the Paper Type pop‑up menu, choose Plain Paper.
8 From the print options pop‑up menu, choose Layout.
9 From the Two‑Sided pop‑up menu, choose Long‑Edge binding or Short‑Edge binding.
• Print Photosallows you to print all photos, selected photos by photo range, and print photos
using predefined photo size templates.
4 To adjust the print settings, press the up or down arrow button to scroll to the option you want to set,
OK
and then press the left or right arrow button to scroll to the setting you want. If necessary, press
to make a selection.
5 Press
.
• For Long‑Edge binding, pages are bound along the long edge of the page (left edge for portrait,
top edge for landscape).
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or
storing.
Portrait
Landscape
2
1
Printing documents from a memory card or flash drive
2
1
To enable the File Print function, the memory card or flash drive must contain document files that are
supported by the printer. For more information, see “Supported memory cards and file types” on page
15.
1 Insert a memory card or flash drive.
The Memory Device screen appears on the display.
• For Short‑Edge binding, pages are bound along the short edge of the page (top edge for portrait,
2 Touch Print Documents.
left edge for landscape).
3 Select the document that you want to print, and then press
.
Portrait
Landscape
2
Canceling print jobs
1
1
2
OK
To cancel a print job from the printer control panel, press
printer returns to the home screen.
, and then press
. Printing stops and the
To cancel a print job from the computer, do the following:
For Windows users
10 Click Print.
1 Open the printers folder.
In Windows 8
Printing photos from a memory card or flash drive
From the Search charm, type run, and then navigate to:
1 Load photo paper.
Apps list > Run > type control printers> OK
2 Insert a memory card, flash drive, or digital camera set to mass storage mode.
In Windows 7 or earlier
If image files and document files are stored in the memory device, then press the left or right arrow
OK
button to select Photos, and then press
.
a
b
Click
, or click Start and then click Run.
In the Start Search or Run dialog, type control printers.
Note: Only files with supported file types will be shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
25
c
Press Enter, or click OK.
2 Double‑click the printer icon.
3 Cancel the print job:
• If you want to cancel a particular print job, then right‑click the document name, and then select
Cancel.
• If you want to cancel all print jobs in the queue, then click Printer > Cancel All Documents.
For Macintosh users
1 Click the printer icon on the Dock.
The print queue dialog appears.
2 Select the print job you want to cancel, and then delete it.
Printing from a mobile device
What is LexPrint?
LexPrint is a free application that lets you print easily from your iPad, iPhone, or iPod touch using any
Lexmark printer connected to the same wireless network. It lets you print Web pages, photos from the
photo album, or photos you recently captured using the camera of your mobile device, depending on its
features. You can also customize print settings from your mobile device.
Depending on your Lexmark printer model, you may need to download the LexPrint Listener application
Supported printers
LexPrint enables your mobile device to communicate with Lexmark printers found on the same network.
• For select printer models that support Direct Image and Zeroconf or Bonjour, you can print directly
from your mobile device to the printer without using LexPrint Listener. To check if your printer model
• For other Lexmark printers, your mobile device can send print jobs to your printer as long as the printer
software and LexPrint Listener are installed on the computer where the printer is connected.
Apple Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying
26
Making copies
1 Load paper.
Copying
2 Load an original document faceup into the ADF or facedown on the scanner glass.
ADF
Scanner glass
3 From the printer control panel, navigate to:
OK
> Copy >
> Copies
4 Press the left or right arrow button to select the number of copies.
5 From the Copy menu screen, press the up or down arrow button to scroll to the option you want to
set, and then press the left or right arrow button to scroll to the setting you want. If necessary, press
OK
to make a selection.
6 Select the copy mode:
• Press
to switch to color mode.
• Press
to switch to black‑and‑white mode.
When you select color or black‑only printing, the light that corresponds to your choice comes on.
S
D
/M
S
/x
D
/M
M
C
7 Press
.
S
D
/M
S
/x
D
/M
M
C
Note: The selected copy settings are reset to the factory default after two minutes of printer inactivity.
Use the scanner glass for single pages, small items
(such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
Use the ADF for multiple‑page documents.
Note: The ADF is available only in select printer
models. If you purchased a printer without an ADF,
then load original documents or photos on the
scanner glass.
Making a two‑sided (duplex) copy automatically
The automatic duplex unit supports A4-, A5-, letter-, legal-, and executive-size paper. If you need to make
two‑sided copies using other paper sizes, then see the instructions for making a two‑sided copy manually.
Note: You cannot make two‑sided copies on envelopes, card stock, or photo paper.
Tips for copying
• Make sure the exit bin is fully extended and the bin extender is flipped out.
1 Load paper.
2 Load the original document faceup into the ADF or facedown on the scanner glass.
• Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF
Notes:
supports the original document size.
• Make sure you load only one page at a time.
• Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning
• If the original document is one‑sided, then you can use either the ADF or the scanner glass.
• If the original document is two‑sided, then you can use only the scanner glass.
or the ADF does not support the original document size.
• When using the ADF, adjust the paper guides on the ADF to the width of the original document.
• To easily retrieve a document after copying or scanning, lift the ADF input tray.
3 From the printer control panel, navigate to:
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned
image.
OK
> Copy >
> 2‑Sided Copies
4 Press the left or right arrow button to select a two‑sided copying option:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
• If you are copying a one‑sided document, then press the arrow buttons to scroll to 1‑sided to
2‑sided.
• When the document to be copied is in place with the settings you want, press
to start copying.
• If you are copying a two-sided document, then press the arrow buttons to scroll to 2‑sided to
1‑sidedor 2‑sided to 2‑sided.
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying
27
Notes:
• If you want to specify the page orientation and layout of the original document and the copy,
OK
then press the arrow buttons to scroll to Advanced. Press
selection, and then press until you reach the Copy menu.
every time you make a
• For long-edge binding, pages are bound along the long edge of the page (left edge for portrait
orientation and top edge for landscape orientation).
• For short-edge binding, pages are bound along the short edge of the page (top edge for portrait
orientation and left edge for landscape orientation).
5 Press
, and then follow the instructions on the printer display.
Canceling copy jobs
OK
To cancel a copy job, press
, and then press
.
Scanning stops and the printer returns to the previous menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
28
Scanning to a local computer
1 Load the original document faceup into the ADF or facedown on the scanner glass.
Scanning
2 From the printer control panel, navigate to:
ADF
Scanner glass
OK
OK
> Scan >
> Computer > USB‑Connected Computer >
The USB‑connected computer will receive the scan by default.
Note: Make sure the scan software is installed on the destination computer.
3 Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
OK
Set the color, quality, original image size, and other scan options. If necessary, press
you make a selection.
each time
4 Press
.
S
D
/M
S
/x
D
/M
M
C
Scanning to a network folder
S
D
/M
S
/x
D
/M
M
C
Notes:
Use the scanner glass for single pages, small items
(such as postcards or photos), transparencies, photo
paper, or thin media (such as magazine clippings).
• This feature may not appear in the Embedded Web Server, depending on your printer model.
Use the ADF for multiple‑page documents.
• Make sure you have created a folder shortcut before you begin. For more information, see “Adding
a network folder shortcut” on page 28.
Note: The ADF is available only in select printer
models. If you purchased a printer without an ADF,
then load original documents or photos on the
scanner glass.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel, navigate to:
OK
OK
> Scan >
> Network Folder >
Tips for scanning
3 Press the left or right arrow button to scroll to the name of the network shared folder you want, and
• Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF
OK
then press
.
supports the original document size.
4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
• Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning
or the ADF does not support the original document size.
OK
• When using the ADF, adjust the paper guides on the ADF to the width of the original document.
5 Set the color, quality, original image size, and other scan options. If necessary, press
you make a selection.
each time
• To easily retrieve a document after copying or scanning, lift the ADF input tray.
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned
image.
6 Press
.
Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture
to scan documents using a network printer and save the scan output.
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
• When the document to be scanned is in place with the settings you want, press
to start scanning.
Adding a network folder shortcut
1 On your computer, create a shared folder with read/write access.
2 On a Web browser, type your printer IP address, and then press Enter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
29
3 Navigate to either of the following:
In Windows 7 or earlier
• Settings > Scan‑to‑Network Folder Setup
• Settings > Manage Shortcuts > Add New Shortcut > Scan to Network
a
b
c
Click
or Start.
Click All Programs or Programs, and then select the printer program folder from the list.
4 Enter the necessary information, and then click Add.
Navigate to:
Printer Home > select your printer > Scan
Note: To avoid unsaved changes to your settings, make sure the network folder shortcut name is
different from that of your folder name.
3 Select Email photo, Email document, or Email PDF.
Note: You can select Email document only when an OCR application is stored on your computer.
Scanning to a flash drive or memory card
Scanning starts and the scan progress dialog appears. When the scan is finished, a new e‑mail message
is created with the scanned document automatically attached.
Notes:
4 Compose your e‑mail message.
• Some features are available only in select printer models.
• Make sure your flash drive or memory card is not write‑protected.
Note: If your e-mail program does not open automatically, then you can scan the document to the
computer, and then send it through e-mail as an attachment.
1 Load the original document faceup into the ADF or facedown on the scanner glass.
2 From the printer control panel navigate to:
For Macintosh users
OK
> Scan >
> Memory Device
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the Finder, select Applications, and then launch the application you want to use.
OK
3 Insert the flash drive or memory card, and then press
.
Note: Use any application that supports both your printer and an e‑mailing option, such as Image
Note: The printer reads only one memory device at a time.
Capture.
4 Press the up or down arrow button to scroll to the scan option you want to set, and then press the
left or right arrow button to scroll to the setting you want.
3 From the list of devices, select your printer.
Note: For information on finding the list of devices, check the documentation that came with the
application, or search for Scanning an imagein the Search field of the Help menu.
OK
Set the color, quality, original image size, and other scan options. If necessary, press
you make a selection.
each time
4 Adjust the scan settings as needed.
5 Press
.
Follow the instructions on the printer display.
?
If applicable, click
on the preview dialog for more information.
5 Set the e‑mail application as the scan destination, and then start the scan job.
Scanning directly to e‑mail using the printer software
6 Compose your e‑mail message.
Make sure you have set up your e‑mail settings before proceeding. For more information, see the section
on e‑mailing in the User’s Guide.
Scanning to a PDF
For Windows users
For Windows users
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the computer, do the following:
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the computer, do the following:
In Windows 8
From the Search charm, type Printer Home, and then navigate to:
In Windows 8
From the Search charm, type Printer Home, and then navigate to:
Printer Home > select your printer > Scan
Printer Home > select your printer > Scan > PDF
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning
In Windows 7 or earlier
30
a
b
c
Click
or Start.
Click All Programs or Programs, and then select the printer program folder from the list.
Navigate to:
Printer Home > select your printer > Scan > PDF
Scanning starts and the scan progress dialog appears.
3 Save the document as a PDF.
For Macintosh users
1 Load an original document faceup into the ADF or facedown on the scanner glass.
2 From the Finder, select Applications, and then launch the application you want to use.
Note: Use any application that supports your printer.
3 From the list of devices, select your printer.
Note: For information on finding the list of devices, check the documentation that came with the
application or search for Scanning an imagein the Search field of the Help menu.
4 Adjust the scan settings as needed.
?
If applicable, click
on the preview dialog for more information.
5 Set the application that supports the PDF format as the scan destination, and then start the scan job.
6 Save the document as a PDF.
Canceling scan jobs
Do one or more of the following:
OK
• From the printer control panel, press
, and then press
.
Scanning stops and the printer returns to the previous menu.
• If you are sending the scan job using the printer software, then cancel the scan job from the software
dialog.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-mailing
31
Apps list > Printer Home > select your printer > Settings > Set up the printer to e‑mail
E-mailing
In Windows 7 or earlier
You can use your printer to send e-mail to one or more recipients without using a computer provided you
have set up the scan to e-mail task through shortcuts. For more information, see the section on shortcuts
in the Quick Reference Guide.
a
b
c
Click
or Start.
Click All Programs or Programs, and then select the printer program folder from the list.
Beforeyoucansende-mailusingtheprintercontrolpanel, youmustfirstconfigurethenetworkconnection
and e-mail settings of your printer.
Navigate to:
Printer Home > select your printer > Settings > Set up the printer to e‑mail
The E‑mail Setup Wizard opens.
2 Follow the instructions on the computer screen.
Sending e-mail
For Macintosh users
Tips for e‑mailing
1 From the Finder, navigate to:
• Make sure to enter your e‑mail account information and set up the SMTP server before sending an
Applications > select your printer folder > Printer Settings > Email
e‑mail.
2 Follow the instructions on the computer screen, and then click Save Settings.
• Make sure the printer is connected to an Ethernet or wireless network before sending an e‑mail.
If necessary, make sure the network is connected to the Internet for the printer to communicate with
the SMTP server. If the printer cannot connect to the Internet, then contact your system support
person.
Canceling an e‑mail
Do one or more of the following:
The printer supports only one active network connection (Ethernet or wireless) at a time.
OK
• From the printer control panel, press
, and then press
.
• Add contacts to your address book. When sending an e‑mail, you can just select contacts from your
address book instead of typing their e‑mail addresses repeatedly.
• If you are sending the e‑mail using the printer software, then cancel the e-mail from the software
dialog.
• Use the ADF when scanning two‑sided pages if your printer supports duplex scanning and the ADF
supports the original document size.
• Use the scanner glass when scanning two‑sided pages if your printer does not support duplex scanning
or the ADF does not support the original document size.
• When using the ADF, adjust the paper guides on the ADF to the width of the original document.
• To easily retrieve a document after copying or scanning, lift the ADF input tray.
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned
image.
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
• When the document to be e-mailed is in place with the settings you want, press
to start scanning.
Setting up the e-mail function
For Windows users
1 Run the E‑mail Setup Wizard.
In Windows 8
From the Search charm, type Printer Home, and then navigate to:
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
32
To connect:
Connect the cable from the wall jack to the port of the printer.
Tips for this setup:
Setting up the printer to fax
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up
this product or make any electrical or cabling connections, such as the power supply cord or
telephone, during a lightning storm.
• You can set the printer to receive faxes automatically (Auto Answer On) or manually (Auto Answer
Off).
CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11)
cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting
this product to the public switched telephone network.
• If you want to receive faxes automatically (Auto Answer On), then set the printer to pick up on any
number of rings that you want.
Setup 2: Printer is sharing the line with an answering machine
Connected to the same telephone wall jack
Step 1: Connect the printer to the telephone line
Check the scenarios below and follow the setup that is applicable to your telephone service.
Scenario 1: Standard telephone line
Setup 1: Printer is connected to a dedicated fax line
PHONE
LINE
To connect:
1 Connect the cable from the wall jack to the port of the printer.
2 Remove the protective plug from the
to the port.
port of the printer, and then connect the answering machine
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
33
Connected to different wall jacks
Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service
0 2
PHONE
LINE
To connect:
Connect the cable from the wall jack to the port of the printer.
Tips for this setup:
• If you have only one telephone number on your line, then you need to set the printer to receive faxes
To connect:
1 Connect the cable from the wall jack to the port of the printer.
automatically (Auto Answer On).
• Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call.
2 Remove the protective plug from the
port of the printer, and then connect the telephone to the
port.
• If you subscribe to a distinctive ring service provided by your telephone company, then make sure that
you set the correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if
you have set it to receive faxes automatically.
Tips for this setup:
• This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service,
then make sure that you set the correct ring pattern for the printer. Otherwise, the printer will not
receive faxes even if you have set it to receive faxes automatically.
• If you have only one telephone number on your line, then you need to set the printer to receive faxes
manually (Auto Answer Off).
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
34
Interference causes noise and static on the telephone, failed and poor quality faxes for the printer, and
When you answer the telephone and you hear fax tones, press *9* or the manual answer code on the
telephone to receive the fax.
slow Internet connection on your computer.
• You can also set the printer to receive faxes automatically (Auto Answer On), but you need to turn off
the voice mail service when you are expecting a fax. This setting works best if you are using voice mail
more often than fax.
To install a filter for the printer:
1 Connect the line port of the DSL filter to the wall jack.
2 Connect a telephone cable from the port on the back of the printer to the phone port on the DSL
filter.
Scenario 2: Digital Subscriber Line (DSL)
3 To continue using a computer for Internet access, connect the computer to the DSL HPN port on the
DSL filter.
4 To connect a telephone to the printer, remove the protective plug from the
and then connect the telephone to the port.
port of the printer
Scenario 3: VoIP telephone service
A DigitalSubscriberLine splitsyourregulartelephone line into twochannels: voice and Internet. Telephone
and fax signals travel through the voice channel, and Internet signals pass through the other channel. This
way, you can use the same line for analog voice calls (including faxes) and digital Internet access.
To minimize interference between the two channels and ensure a quality connection, you need to install
a DSL filter for the analog devices (fax machine, telephone, answering machine) in your network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
35
To connect:
Scenario 4: Digital telephone service through a cable provider
1 Connect one end of a telephone cable to the port of the printer.
Setup 1: Printer is connected directly to a cable modem
2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.
Follow this setup if you normally connect your telephone to a cable modem.
The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your VoIP
provider if you want to activate the second phone port.
3 Remove the protective plug from the
port.
port of the printer, and then connect the telephone to the
Tips for this setup:
• To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the
phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
• If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer
into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line
1 or Phone Port, and then plug the printer and telephone into the splitter.
Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct
splitter, plug an analog telephone into the splitter and then listen for a dial tone.
To connect:
1 Connect one end of a telephone cable to the port of the printer.
2 Connect the other end of the cable to the portlabeled PhoneLine1 or Phone Porton the cable modem.
The port labeled Phone Line 2 or Fax Port is not always active. You may need to pay extra to your
cable provider if you want to activate the second phone port.
3 Remove the protective plug from the
port.
port of the printer, and then connect the telephone to the
Tips for this setup:
• To make sure that the phone port on the cable modem is active, plug an analog telephone into the
phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
36
• If you need two phone ports for your devices but do not want to pay extra, then do not plug the printer
into the second phone port. You can use a phone splitter. Plug the phone splitter into the Phone Line
1 or Phone Port , and then plug the printer and telephone into the splitter.
2 Remove the protective plug from the
port.
port of the printer, and then connect the telephone to the
Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct
splitter, plug an analog telephone into the splitter and then listen for a dial tone.
Scenario 5: Country‑ or region‑specific setup
Different countries or regions have different types of telephone wall jacks. The standard wall jack adopted
by most countries or regions is the Registered Jack-11 (RJ-11). You need to have an RJ‑11 plug, or a
telephone cable that has an RJ‑11 connector, so you can connect a device to an RJ‑11 wall jack.
Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in
the house
Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to
plug your devices into the cable modem. Your cable telephone service comes from the wall jacks.
The fax ports on the back of the printer and the telephone cable that comes with the printer have RJ‑11
connectors. If you have a different type of connector in your country or region, then you may need to use
an RJ‑11 adapter.
To connect:
1 Connect the cable from the wall jack to the port of the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
37
Notes:
Connecting the printer to a non‑RJ‑11 wall jack
• Do not remove the wrap plug from the
• The printer may not come with an RJ-11 adapter in your country or region.
If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove
the wrap plug and connect the device to the port of the printer.
port of the printer.
EXT
LINE
Connecting the printer in countries or regions that use serial connection
To connect:
In some countries or regions, you need to plug all devices into the wall jack. You cannot plug a telephone
1 Connect one end of a telephone cable to the port of the printer.
or answering machine into the
port of the printer. This is called serial connection.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall
jack.
Austria
Germany
Ireland
Italy
Portugal
Spain
3 If you want to connect another device (telephone or answering machine) to the same wall jack, and
if the device has a non‑RJ 11 connector, then connect it directly to the wall jack.
Belgium
Denmark
Sweden
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
38
Connecting the printer to a wall jack in Germany
France
Finland
Netherlands
Norway
Switzerland
The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering
machines. The F port is for telephones.
United Kingdom
Warning—Potential Damage: If your country or region is on the list, then do not remove the wrap plug
from the port of the printer. It is necessary for the proper functioning of the devices on the
telephone line.
N F N
EXT
LINE
To connect:
Connect the cable from the wall jack to the port of the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
39
Connect the printer to any of the N ports.
If you hear a dial tone, then the telephone line and the wall jack are working.
Make sure the printer is properly connected to the telephone line
1 While the printer is connected to a telephone line through the port on the back of the printer, plug
an analog telephone into the
port of the printer.
2 Listen for a dial tone.
If you hear a dial tone, then the printer is properly connected to the telephone line.
If you do not hear a dial tone, then review Step 1 or see the “Fax troubleshooting checklist” on page
53.
Step 3: Set your fax name and fax number
Your user information includes your name or your company name, your fax number (your fax number is
your telephone number, unless you have a dedicated fax telephone line), and the time and date on your
fax machine when a transmission is made. This information appears in the header and footer of the faxes
that you send.
In some countries, you cannot send a fax without this information. Some fax machines also block faxes
without sender information, so make sure that you enter this information in your printer.
N
F
N
1 From the printer control panel, navigate to:
PHONE
LINE
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Dialing and Sending >
> Fax Name >
OK
2 Enter your name or your company name, and then press
• To change a character, press the left arrow button.
• To add a space, press the number 0.
.
OK
3 Press the arrow buttons to scroll to Fax Number, and then press
.
To connect:
OK
4 Enter your fax number or your telephone number, and then press
.
1 Connect one end of a telephone cable to the port of the printer.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to an N port.
Step 4: Set the printer to receive faxes automatically or
manually
3 If you want to connect a telephone and answering machine to the same wall jack, then connect the
devices as shown.
If the printer is connected to a dedicated fax line or sharing the line with an answering machine, then you
can set the printer to receive faxes automatically. If the printer is sharing the line with a telephone
subscribed to voice mail service, then set the printer to receive faxes manually.
Step 2: Check the dial tone
A dial tone lets you know if the telephone line is working or if the printer is properly connected to the
telephone line.
1 From the printer control panel, navigate to:
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Auto Answer >
Make sure the telephone line and the wall jack are working
1 Plug an analog telephone into the wall jack.
OK
2 Press the arrow buttons to scroll to the setting you want, and then press
.
2 Listen for a dial tone through the telephone handset.
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up the printer to fax
40
Note: In some models, entries 1–89 are for individual contacts and entries 90–99 are for fax groups.
Enter the number before entering the contact name and fax number of the contact.
Step 5: Set the number of rings
If you set Auto Answer to On in Step 4, then do the following. If you set Auto Answer to Off, then proceed
to Step 6.
Using the fax software
If you are connecting the printer to a computer, then you can also create a contact list using the fax
software.
If you subscribe to Distinctive Ring
Setting the correct ring is important if you subscribe to the Distinctive Ring Pattern Detection (DPRD)
feature offered by telephone companies. This feature allows you to have multiple telephone numbers on
one telephone line. Each telephone number has a designated ring pattern (All Rings, Single Ring Only,
Double Ring Only, Triple Ring Only, Single or Double Rings Only, Single or Triple Rings Only, Double or
Triple Rings Only). The different ring patterns let you know which telephone number was dialed and which
device you should use to answer the call.
For Windows users
1 Open the Contacts tab of the Printer Setup Utility.
In Windows 8
From the Search charm, type printer home, and then navigate to:
Assign one of your telephone numbers to the printer as the fax number, and then set the printer to answer
the ring pattern of that number. If the pattern is set incorrectly, then the printer rings, but it never receives
the fax.
Apps list > Printer Home > select your printer > Fax > Edit contact list
In Windows 7 or earlier
1 From the printer control panel, navigate to:
a
b
c
Click
or Start.
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Ring Pattern >
Click All Programs or Programs, and then select the printer program folder from the list.
OK
2 Press the arrow buttons to scroll to the ring pattern you want, and then press
.
Navigate to:
Printer Home > select your printer > Fax > Edit contact list
If you do not subscribe to Distinctive Ring
The Contacts tab of the Printer Setup Utility opens.
2 Click Select from phone book.
If the printer is sharing the line with other devices, then set the printer to pick up on the greater number
of rings. If the printer is connected to a dedicated fax line, then you can choose any number of rings that
you want.
3 From the Phone Book field, select a phone book.
1 From the printer control panel, navigate to:
4 Select the contact that you want to add, and then click Add to or change list to import the contact.
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Pick Up On >
Note: To add contacts, you need to import contacts from the phone books on your computer that
are supported by the fax software. In addition to the software Address Book, you may also have
phone books of the mail clients installed on your computer, such as Microsoft Outlook.
2 Select the number of rings that you want, and then save the setting.
5 Click OK.
Step 6: Create a contact list
For Macintosh users
Using the printer control panel
1 From the Finder, navigate to:
1 From the printer control panel, navigate to:
Applications > select your printer folder
2 Double‑click Printer Settings.
Touch‑screen models Non‑touch‑screen models
3 Click the Contacts tab.
OK
OK
OK
> Address Book
> Setup >
> Fax Setup >
> Address Book >
• To add contacts, click the Individuals tab.
• To add fax groups, click the Groups tab.
2 Use the menus to add a contact or a fax group. You can add up to 89 contacts and 10 fax groups.
• To change a character, press the left arrow button.
• To add a space, press the number 0.
?
For more information on the fax software, click Help or
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Faxing
41
Sending faxes using the computer
Faxing
For Windows users
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up
this product or make any electrical or cabling connections, such as the fax feature, power cord, or
telephone, during a lightning storm.
1 With a document open, click File > Print.
2 Make sure to select the fax version of your printer, and then click Properties, Preferences, Options,
or Setup.
3 Click the Fax tab, and then make sure Enable Fax is selected.
Sending faxes
4 Enter the recipient fax number or numbers in the “Fax number(s)” field.
You can enter fax numbers manually or by using the Phone Book feature.
Tips for sending faxes
• Make sure the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working
if you hear a dial tone.
5 If necessary, enter a prefix in the Dialing Prefix dialog.
6 Select the appropriate paper size and page orientation.
• Make sure the paper exit tray is fully extended and the tray extension is flipped out.
• Depending on your printer model, use the ADF when scanning two‑sided (duplex) pages.
• To easily retrieve a document after copying or scanning, lift the ADF input tray.
• When using the ADF, adjust the paper guide on the ADF to the width of the original document.
7 Select Include Cover Page with Fax, and enter the appropriate information if you want to include a
cover page with the fax.
8 Click OK.
For Macintosh users
• When using the scanner glass, close the scanner cover, if possible, to avoid dark edges on the scanned
image.
1 With a document open, choose File > Print.
2 From the Printer pop‑up menu, select the fax version of your printer.
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
Note: In order to see the fax options on the Print dialog, you must use the fax driver for your
printer. If the fax version of the printer is not on the list, then choose Add a printer, and then
choose the fax version of the printer.
• When the document to be faxed is in place with the settings you want, press
to send the fax.
Sending faxes using the printer control panel
1 From the printer control panel, navigate to:
> Fax
3 Enter the name and number of the recipient.
4 Click Fax.
2 Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list.
Receiving faxes
OK
3 If you want to send a fax to a single recipient, then press
.
If you want to send a fax to a group of numbers (broadcast fax), then press the left or right arrow
Tips for receiving faxes
When receiving faxes:
OK
button to enter another number, and then press
. Repeat this step to add more numbers.
4 Press the Color/Black button to select a color or black‑and‑white fax.
5 Press to start the fax job.
• Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is
working if you hear a dial tone.
• If you set the printer to receive faxes manually (Auto Answer Off), then make sure that the ringer
volume is not set to Off.
Warning—Potential Damage: Do not touch the cables or the and
fax.
ports while actively sending a
• If you have set the printer to receive faxes automatically (Auto Answer On), then load paper in the
printer.
Tip:
• You can send a broadcast fax to up to 30 recipients.
Download from Www.Somanuals.com. All Manuals Search And Download.
Faxing
42
Receiving faxes automatically
• Make sure that the telephone is plugged into the
port on the back of the printer and that the
printer is connected to the wall jack through the port.
1 Make sure that Auto Answer is on:
From the printer control panel, navigate to:
OK
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Auto Answer >
> On >
2 Set the number of rings before the printer picks up incoming faxes:
OK
a
b
Press the arrow buttons to scroll to Pick Up On, and then press
.
OK
Press the arrow buttons to scroll to the number of rings that you want, and then press
the setting.
to save
When the number of rings you set is detected, the printer automatically receives the incoming fax.
Warning—Potential Damage: Do not touch the cables or the and
ports while actively receiving
a fax.
Tips:
• If the printer is sharing the line with other analog devices (telephone, answering machine), then set
the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call. If the printer is on a dedicated fax line,
then you may set the printer to pick up on any number of rings.
• If you have multiple numbers on a single line, or if you subscribe to a distinctive ring service provided
by your telephone company, then make sure that you set the correct ring pattern for the printer.
Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically.
Receiving faxes manually
1 Turn off Auto Answer:
From the printer control panel, navigate to:
OK
OK
OK
OK
> Setup>
> Fax Setup >
> Ringing and Answering >
> Auto Answer >
> Off >
OK
2 When the telephone rings and you hear fax tones when you pick up the handset, press
printer or *9* on the telephone attached to the printer.
on the
Warning—Potential Damage: Do not touch the cables or the and
ports while actively receiving
a fax.
Tips:
• The default code for answering faxes manually is *9*, but for increased security, you can change it to
a number that only you know. You can enter up to 7 characters for your code. The valid characters are
the digits 0–9 and the characters # and *.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless networking
43
• Change the wireless settings after installation.
Wireless networking
• Install the printer on additional network computers.
Notes:
Information you will need during wireless setup
To set up the printer for wireless printing, you need to know the following:
• The name of your wireless network, which is also known as the SSID (Service Set Identifier)
• If encryption was used to secure your network
• This program is applicable only in select printer models.
• Make sure the printer is turned on.
• Make sure the wireless network adapter installed in your printer is attached and working properly.
• Do not connect the installation or network cables until prompted to do so by the setup software.
• The security key (either a WEP key or WPA/WPA2 preshared key/passphrase)
Installing the Wireless Setup Utility (Windows only)
To find the WPA/WPA2 preshared key/passphrase for the wireless network, see the documentation
that came with the access point (wireless router), see the Web page associated with the access point,
or consult your system support person.
1 Obtain a copy of the software installer package.
• From the Software and Documentation CD that came with your printer
• From our Web site:
SUPPORT & DOWNLOAD > select your printer > select your operating system
If your access point is using WEP security, then the WEP key should be:
• Exactly 10 or 26 hexadecimal characters
or
• Exactly 5 or 13 ASCII characters
2 Double-click the software installer package.
If your accesspoint is using WPA or WPA2 security, then the WPA/WPA2 preshared key/passphrase should
be:
Wait for the installation dialog to appear.
If you are using a Software and Documentation CD and the installation dialog does not appear, then
do the following:
• Exactly 64 hexadecimal characters
or
In Windows 8
• From 8 to 63 ASCII characters
From the Search charm, type run, and then navigate to:
Apps list > Run> type D:\setup.exe> OK
Notes:
• Hexadecimal characters are A–F, a–f, and 0–9.
In Windows 7 or earlier
• ASCII characters are letters, numbers, and symbols found on a keyboard. ASCII characters in a
WPA/WPA2 preshared key/passphrase are case‑sensitive.
a
b
c
Click
, or click Start and then click Run.
If your wireless network is not using security, then you will not have a security key.
In the Start Search or Run dialog, type D:\setup.exe.
Press Enter, or click OK.
Note: If you do not know the SSID of the network that your computer is connected to, then launch the
wireless utility of the computer network adapter and look for the network name. If you cannot find the
SSID or the security information for your network, then see the documentation that came with the
access point, or contact your system support person.
Note: Dis the letter of your CD or DVD drive.
3 Click Install, and then follow the instructions on the computer screen.
4 From the Available Software dialog, select Wireless Setup Utility.
Notes:
Installing the printer on a wireless network
• Wireless Setup Utility is selected by default.
Using the Wireless Setup Utility (Windows only)
• If you want to install only the Wireless Setup Utility, then clear the other selected additional
software.
The Wireless Setup Utility lets you:
5 Click Continue, and then follow the instructions on the computer screen.
• Configure the printer to join an existing wireless network.
• Add a printer to an existing ad hoc network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless networking
44
2 Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen.
Launching the Wireless Setup Utility
1 Do the following:
?
Note: If you encounter problems while running the application, then click
.
In Windows 8
From the Search charm, type wireless setup utility, and then navigate to:
Apps list > Wireless Setup Utility
What is Wi‑Fi Protected Setup?
Wi‑Fi Protected Setup (WPS) is a simple and secure configuration that allows you to establish a wireless
home network and enable network security without requiring prior knowledge of Wi‑Fi technology. It is
no longer necessary to configure the network name (SSID) and WEP key or WPA passphrase for network
devices.
In Windows 7 or earlier
a
b
c
Click
or Start.
Click All Programs or Programs.
Note: WPS supports only networks that communicate through access points (wireless routers).
Select the printer program folder from the list, and then select Wireless Setup Utility.
The printer supports the following methods in connecting to a wireless network:
2 Follow the instructions on the computer screen.
• Personal Identification Number (PIN)—A PIN on the printer is entered into the wireless settings of the
access point.
Using the Wireless Setup Assistant (Macintosh only)
• Push Button Configuration (PBC)—Buttons on both the printer and the access point are pushed within
a given period of time.
The Wireless Setup Assistant lets you:
• Configure the printer to join an existing wireless network.
• Add a printer to an existing ad hoc network.
• Change the wireless settings after installation.
• Install the printer on additional network computers.
Look for any of these identifier marks to check if your access point is WPS certified:
Notes:
• This application is applicable only in select printer models.
• Make sure the printer is turned on.
You can find these WPS logos on the side, back, or top of your access point.
• Make sure the wireless network adapter installed in your printer is attached and working properly.
• Do not connect the installation or network cables until prompted to do so by the setup software.
For more information on accessing the wireless settings and determining the WPS capability of your access
point, see the documentation that came with the access point or contact your system support person.
• Make sure that you are using the latest version of the Wireless Setup Assistant application. For
Configuring Wi‑Fi Protected Setup manually
Installing the Wireless Setup Assistant (Macintosh only)
Note: Make sure your access point (wireless router) is Wi‑Fi Protected Setup (WPS) certified. For more
1 Download the latest version of the Wireless Setup Assistant application from
information, see the User’s Guide.
If your printer or device has not yet been configured for wireless connection and you want to configure
it using WPS, then push the WPS button on the wireless router. Wait for the printer control panel to display
amessageto beginWPS configuration. Theremightbeashort delay before the messageappears. Ifnothing
happens after 30 seconds, then do one of the following:
2 Double‑click the downloaded software installer package.
3 Follow the instructions on the computer screen.
Launching the Wireless Setup Assistant
USE THE PUSH BUTTON CONFIGURATION (PBC) METHOD
1 From the Finder, navigate to:
Applications > select your printer folder
1 From the printer control panel, navigate to:
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless networking
45
OK
OK
OK
> Setup >
> Network Setup >
> Wireless 802.11b/g/n >
> Network Connection
OK
OK
OK
OK
Setup >
> Wireless >
> Wi‑Fi Protected Setup >
> WPS PBC Mode >
2 Follow the instructions on the printer display.
USE THE PERSONAL IDENTIFICATION NUMBER (PIN) METHOD
1 From the printer control panel, navigate to:
OK
OK
OK
> Setup >
> Network Setup >
> Wireless 802.11b/g/n >
> Network Connection
OK
OK
OK
OK
Setup >
> Wireless >
> Wi‑Fi Protected Setup >
> WPS PIN Mode >
2 Follow the instructions on the printer display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Embedded Web Server
46
Use the
Navigation pane Access the Embedded Web Server menus.
Header bar
To
Using the Embedded Web Server
The Embedded Web Server lets you view and remotely customize printer settings even when you are not
physically near the printer. You can also view reports on printer activities, monitor and order printer
supplies online, contact customer support, and download updates for your printer.
1
2
• View a brief summary of your printer supplies.
• View the information on printer model, IP address, contact information, and
location.
The Embedded Web Server requires that the printer is connected to your network. For more information
on connecting the printer to your network, see the printer User’s Guide.
• Access the Search function.
Note: The search fields may not appear in the Embedded Web Server,
depending on your printer model.
Accessing the Embedded Web Server
Note: Make sure the printer is connected to your network. For more information, see the printer User’s
3
Information pane View specific information and access submenu items, depending on the menu
selected from the navigation pane.
Guide.
1 Obtain the printer IP address:
Customizing printer settings
1 From the navigation pane, select Settings.
• From the printer home screen
• From the TCP/IP section in the Networks/Ports menu
2 Do one of the following:
Note: An IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
Click
To
2 Open a Web browser, and then type the printer IP address in the address field.
General Settings
Copy Settings
View and customize general printer settings.
The Embedded Web Server appears.
View and customize settings for making copies.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
Understanding the home page
Fax Settings
View and customize settings for sending and receiving faxes.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
2
E-mail/FTP Settings
View and customize settings for sending e-mails, or sending files to a File
Transfer Protocol (FTP) address.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
3
1
Print Settings
Paper Setup
Network/Ports
Security
View and customize print settings.
View and customize paper setup options.
View and customize network settings.
View and customize security settings for the printer and Embedded Web
Server.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
E-mail Alert Setup
Set up the e-mail server for the Embedded Web Server, and then customize
e-mail alert settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Embedded Web Server
Click To
47
Scan‑to‑Network Folder Add or manage a folder destination when the Scan to Network application is
Setup
used.
Notes:
• This feature may not appear in the Embedded Web Server, depending
on your printer model.
• To use this feature, first make sure you are using the Hyper Text
Transfer Protocol Secure (HTTPS) connection.
Manage Shortcuts
Manage Profiles
Add or manage shortcut settings for a printer task.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
View the IP address of a profile, or delete it.
Note: This feature may not appear in the Embedded Web Server, depending
on your printer model.
Address Book Setup
Add or manage address book contacts when sending e‑mails.
Intervention
Management
View any messages from the printer requesting intervention from the user.
Import/Export
Import or export a configuration file.
Additional Solutions
Device Management
Install, customize, or uninstall a solution.
Allow the Embedded Web Server to collect data from the printer.
3 Click Submit to save, or click Reset Form to discard the new settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using shortcuts
48
Getting started
During installation, a link will be provided for you to create shortcuts. If you were not able to create your
shortcuts during installation, then you may create the shortcuts through your printer software.
Using shortcuts
What are shortcuts?
A shortcut is a way to quickly accomplish printing, copying, scanning, e‑mailing, or faxing tasks with the
printer. You can configure and save a set of frequently used printer settings available for a given task and
then assign a shortcut number and shortcut name to it.
Launching the shortcuts page using the printer software
Before you begin, make sure:
• Your printer and computer are each connected to the network through an Ethernet or wireless
connection.
The shortcut number and shortcut name serve as the identification for a particular task and its printer
settings. When you want to perform a task with those settings, you do not need to go through the usual
process of adjusting the settings and options. Simply enter the shortcut number or select the shortcut
name and number on the printer control panel, and the task will launch automatically.
• Your printer is turned on.
For Windows users
Configure the shortcut settings for a task in the Embedded Web Server:
1 Click
or Start.
Select
To
2 Click All Programs or Programs, and then select the printer program folder from the list.
Copy
Copy a document or photo.
3 Navigate to:
Eco‑Copy
ID Card Copy
Scan to Fax
Scan to E‑mail
Copy a document or photo using two‑sided or draft setting.
Copy both sides of an ID card onto a single page.
Scan a document or photo and send it through fax.
Scan a document or photo and send it through e‑mail.
Printer Home > select your printer > Settings > Configure Shortcuts
For Macintosh users
1 From the Finder, navigate to:
Applications > select your printer folder > Shortcuts
Note: Make sure the printer is connected to the network and the
Internet through an Ethernet or wireless connection.
2 Select your printer from the list, and then click Launch.
Scan to Computer
Scan to Network
Scan a document or photo and send it to your computer.
Note: Make sure the printer is connected to the computer locally
(USB).
Creating a shortcut
1 Launch the shortcuts page, and then navigate to:
Scan a document or photo and save it to a network folder.
Add New Shortcut > select a task
Note: Make sure the printer is connected to the Internet through an
Ethernet or wireless connection.
2 Assign a shortcut number and shortcut name, and then specify the settings.
Notes:
Scan to Memory Device
Print a File
Scan a document or photo and save it to a memory card or flash drive
(depending on your printer model).
• A shortcut number is the number you assign to a particular task and its printer settings. You can
assign shortcut numbers from 1 to 999.
Print a document from your computer.
Note: Make sure the printer is connected to the computer through
the same Ethernet or wireless network.
• If you configured the shortcut to show the settings before running, then the settings will
appear on the printer display. Adjust the settings if necessary.
3 Click Add.
Example:
A lawyer who uses his printer to send e-mails to clients normally navigates through the printer control
panel to select the feature and its available options. Instead of doing that, he can configure the printer
settings (such as the message title and recipient) from the Embedded Web Server, and then assign a
shortcut number and shortcut name to the task. Every time he enters the shortcut number or selects the
shortcut name on the printer control panel, the printer automatically sends the documents according to
the selected settings.
Modifying or deleting a shortcut
1 Launch the shortcuts page, and then select a shortcut.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using shortcuts
49
2 Do either of the following:
• Make the necessary changes, and then click Save Changes.
• Click Delete.
Using shortcuts on the printer
Make sure you have created a shortcut.
From the printer control panel, navigate to:
OK
OK
> Shortcuts >
> select a shortcut >
or
OK
>
> enter the shortcut number >
Note: If you configured the shortcut to show the settings before running, then the settings will appear
on the printer display. Adjust the settings if necessary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
50
Installation screen did not appear during installation
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
Troubleshooting
For Windows users
Before you troubleshoot
Use this checklist to solve most printer problems:
1 Double‑click the software installer package.
Wait for the installation dialog to appear.
• Make sure the power cord is plugged into the printer and into a properly grounded, working electrical
outlet.
If you are using a Software and Documentation CD and the installation dialog does not appear, then
do the following:
• Make sure the printer is turned on.
In Windows 8
• Make sure the printer is securely connected to the computer, print server, or network access point.
• Check the printer for error messages, and resolve any errors.
• Check for paper jam messages, and clear any jams.
From the Search charm, type run, and then navigate to:
Apps list > Run > type D:\setup.exe> OK.
• Check the ink cartridges, and install new cartridges if necessary.
• Turn the printer off, wait about 10 seconds, and then turn the printer back on.
In Windows 7 or earlier
a
b
c
Click
or click Start, and then click Run.
Note: Make sure the printer is not in Sleep mode. Press and hold
for three seconds to turn off
In the Start Search or Run dialog, type D:\setup.exe.
the printer.
Press Enter, or click OK.
Note: Dis the letter of your CD or DVD drive.
If Troubleshooting does not solve your problem
2 Click Install, and then follow the instructions on the computer screen.
• Knowledgebase articles with the latest information and troubleshooting for your printer
• Live online customer support
For Macintosh users
1 From the Finder desktop, click the CD icon.
• Contact numbers for telephone customer support
• Firmware and software updates
2 Double-click the software installer package, and then follow the instructions on the computer screen.
Incorrect language appears on the display
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
following:
Setup troubleshooting
• “Installation screen did not appear during installation” on page 50
• “Incorrect language appears on the display” on page 50
• “Software did not install” on page 51
CHANGE THE LANGUAGE USING THE PRINTER MENUS
• “Recovering the security PIN of the printer” on page 51
• “Print job does not print or is missing pages” on page 51
• “Printer is printing blank pages” on page 52
OK
OK
OK
> Setup >
3 To confirm the setting, press the left or right arrow button to scroll to Yes, and then press
> Device Setup >
> Language >
OK
.
• “Printer is busy or does not respond” on page 52
• “Cannot delete documents from the print queue” on page 52
• “Cannot print through USB” on page 52
OK
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
51
Software did not install
Print job does not print or is missing pages
If you encountered problems while installing, or if your printer does not appear in the list in the printers
folder or as a printer option when sending a print job, then try uninstalling and reinstalling the software.
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
following:
Before you reinstall the software, do the following:
MAKE SURE THE INK CARTRIDGES ARE INSERTED CORRECTLY
MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE
1 Turn the printer on, and then open the ink cartridge access door.
2 Make sure the cartridges are inserted correctly.
The cartridges should click firmly into their matching color slots.
3 Close the ink cartridge access door.
CHECK THE USB CONNECTION
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
SELECT YOUR PRINTER FROM THE PRINT DIALOG BEFORE SENDING THE PRINT JOB
Note: This solution applies to Macintosh users only.
1 With a document open, choose File > Print.
The USB port is marked with
.
2 From the printer pop-up menu, choose your printer, and then click Print.
Note: If you continue to have problems, then try another USB port on the computer. You may have
If your printer does not appear on the Printer list, then choose Add Printer. From the list of printers
in the Default tab, select your printer, and then click Add.
connected to a defective port.
If your printer does not appear on the list, then try either of the following:
• For a USB-connected printer, remove and then reconnect the USB cable.
• For a printer that is wirelessly connected, see the Wireless troubleshooting section.
RECONNECT THE PRINTER POWER SUPPLY
1 Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
the printer.
for three seconds to turn off
MAKE SURE THE PRINT JOB IS NOT PAUSED
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power
supply.
MAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord
into the wall outlet.
RECONNECT THE PRINTER POWER SUPPLY
1 Turn off the printer.
4 Turn on the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
for three seconds to turn off
the printer.
Recovering the security PIN of the printer
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power
supply.
Contact customer support.
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord
into the wall outlet.
4 Turn on the printer.
REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
52
If the printer will not come out of Sleep mode, then reset the power:
1 Unplug the power cord from the wall outlet, and then wait 10 seconds.
2 Insert the power cord into the wall outlet, and then turn on the printer.
CHECK THE USB CONNECTION
1 Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
If this problem persists, then check our Web site for updates for your printer software or firmware.
The USB port is marked with
.
RECONNECT THE PRINTER POWER SUPPLY
Note: If you continue to have problems, then try another USB port on the computer. You may have
connected to a defective port.
1 Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold
for three seconds to turn off
the printer.
REMOVE AND REINSTALL THE PRINTER SOFTWARE
2 Unplug the power cord from the wall outlet, and then pull out the power cord from the power
supply.
Printer is printing blank pages
3 After one minute, reconnect the power cord into the power supply, and then plug the power cord
into the wall outlet.
Blank pages may be caused by improperly installed ink cartridges.
4 Turn on the printer.
REINSTALL THE INK CARTRIDGES AND DEEP CLEAN AND ALIGN THE PRINTHEAD
1 Reinstall the ink cartridges. For more information, see “Replacing ink cartridges” on page 17.
Cannot delete documents from the print queue
The cartridges should click firmly into their matching color slots.
If you have jobs stuck in the print queue and cannot delete them to get other jobs to print, then the
computer and printer may not be communicating.
2 Load plain, unmarked paper.
3 From the printer control panel, navigate to:
RESTART THE COMPUTER AND TRY AGAIN
OK
OK
OK
> Setup >
> Maintenance >
> Deep Clean Printhead >
OK
4 Press the up or down arrow button to scroll to a cleaning option, and then press
Wait until the printer is ready.
.
REMOVE AND RECONNECT THE USB CABLE CONNECTED TO YOUR PRINTER
5 From the printer control panel, navigate to:
Cannot print through USB
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
following:
OK
OK
OK
> Setup >
> Maintenance >
> Align Printer >
An alignment page prints.
Note: Do not remove the alignment page until printing is finished.
CHECK THE USB CONNECTION
1 Check the USB cable for any damage. If the cable is damaged, then use a new one.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
Printer is busy or does not respond
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
following:
The USB port is marked with
.
MAKE SURE THE PRINTER IS NOT IN SLEEP MODE
Note: If you continue to have problems, then try another USB port on the computer. You may have
connected to a defective port.
If the power light is blinking on and off slowly, then the printer is in Sleep mode. Press
the printer.
to wake up
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
53
Connection checklist
MAKE SURE THE USB PORT IS ENABLED IN WINDOWS
• Make sure that the printer and other devices on the line (if applicable) are set up and configured
correctly according to your setup scenario.
1 Run the Device Manager.
• Make sure that the cables are connected to the correct ports.
• Make sure that the cables are securely plugged in.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type devmgmt.msc> OK
Check the cable connections for the following hardware, if applicable:
In Windows 7 or earlier
Power supply Answering machine Cable modem Splitter
Telephone
VoIP adapter
DSL filter
RJ‑11 adapter
a
b
c
Click
, or click Start and then click Run.
In the Start Search or Run dialog, type devmgmt.msc.
• If the printer is connected to a Digital Subscriber Line, then make sure you are using a DSL filter for
the printer.
Press Enter, or click OK.
• If the printer isconnected to a VoIP adapter or cable modem, then make sure thatthe printeris plugged
into the first phone port.
The Device Manager opens.
2 Click the plus sign (+) beside Universal Serial Bus controllers.
• If you are using a splitter, then make sure that you are using a phone splitter. Do not use a line splitter.
If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.
For more information, see the computer documentation.
Cannot send faxes
If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
REMOVE AND REINSTALL THE PRINTER SOFTWARE
MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER
If you did not enter your user information during initial setup, then enter your fax name and fax number.
In some countries, you cannot send a fax without entering your fax name or company name. Some fax
machines also block unknown faxes or faxes without sender information.
Fax troubleshooting
• “Fax troubleshooting checklist” on page 53
• “Cannot send faxes” on page 53
• “Cannot receive faxes” on page 54
• “Cannot run the fax software” on page 55
DECREASE THE TRANSMISSION SPEED OF THE FAX MODEM
The modem of the printer can transmit data at 33,600 bps. This is the maximum speed at which the
printer can send and receive faxes. It is not necessary, however, to set the modem to its fastest
transmission capability. The speed of the modem of the receiving fax machine must match or be greater
than the speed at which you are sending your fax. Otherwise, your fax will not be received.
Fax troubleshooting checklist
If you encounter problems sending and receiving faxes, then check the connection first:
1 From the printer control panel, navigate to:
1 Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL
filter, VoIP device, or cable modem where you connected the printer. Make sure you plug the
telephone into the same port.
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Dialing and Sending >
> Max Send Speed >
OK
2 Select a sending speed, and then press
.
If you do not hear a dial tone, then contact your line provider.
2 While the printer is connected to the telephone line, check for a dial tone by plugging an analog
ENABLE ERROR CORRECTION
telephone into the
port of the printer.
Errors and blurs may appear in the faxed document if there is too much noise on the line. This option
enables the printer to transmit the bad blocks of data again and correct the errors. When a fax has too
many errors, the fax may be rejected by the receiving fax machine.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each
item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics
in this section.
1 From the printer control panel, navigate to:
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Dialing and Sending >
> Error Correction >
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
54
• The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service).
2 Check to see if error correction is set to On.
OK
If it is not set to On, then press the arrow buttons to select On, and then press
.
MAKE SURE THAT THE PRINTER IS CONNECTED TO AN ANALOG PORT
ENABLE AUTOMATIC FAX CONVERSION
The printer is an analog device. If you are using a PBX system, then make sure that the printer is
connected to an analog port on the PBX. You may need a digital line converter that converts digital
signals into analog signals.
If the receiving fax machine does not support color fax, then this option automatically converts the
outgoing color fax to black and white. It also automatically reduces the resolution of the fax to a
resolution that the receiving machine can support.
MAKE SURE THAT THE PRINTER MEMORY IS NOT FULL
1 From the printer control panel, navigate to:
The printer saves an incoming fax to the printer memory before it prints the fax. If the printer runs out
of ink or runs out of paper while receiving the fax, then the printer saves the fax so you can print it
later. However, if the printer memory is full, then the printer may not be able to receive more incoming
faxes. An error message appears on the display when the printer memory is full. Resolve the error to
free up space in the printer memory.
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Dialing and Sending >
> Auto Fax Convert >
2 Check to see if automatic fax conversion is set to On.
OK
If it is not set to On, then press the arrow buttons to select On, and then press
.
MAKE SURE THAT FAX FORWARDING IS DISABLED
MAKE SURE THAT THE DIAL PREFIX SETTING IS CORRECT
The dialing prefix is the number or series of numbers that you press before you can dial the actual fax
number or telephone number. If the printer is in an office setting or in a private branch exchange, this
can be a specific number that you need to press so you can make a call outside the office.
1 From the printer control panel, navigate to:
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Fax Forward >
OK
Make sure that the dial prefix entered in the printer is correct for your network.
2 Press the arrow buttons to scroll to Off, and then press
.
1 From the printer control panel, navigate to:
INCREASE THE RINGER VOLUME
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Dialing and Sending >
> Dial Prefix >
If you set the printer to receive faxes manually (Auto Answer Off), then increase the ringer volume.
2 Press the arrow buttons to create or modify the prefix.
OK
MAKE SURE THAT YOU HAVE THE CORRECT MANUAL ANSWER CODE
3 If the prefix is not correct, enter the correct prefix, and then press
.
If you set the printer to receive faxes manually (Auto Answer Off), then you need to press the correct
code when a fax comes in so that the printer can receive it.
Cannot receive faxes
If the “Fax troubleshooting checklist” does not solve the problem, then try one or more of the following:
1 From the printer control panel, navigate to:
OK
OK
OK
OK
> Setup >
> Fax Setup >
> Ringing and Answering >
> Manual Pickup Code >
MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP
2 Copy the manual answer code that appears on the display.
The fax settings depend on whether the printer is connected to its own fax line or shares the line with
other devices.
Note: To increase the security, you can change your manual pickup code to a number that only you
know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and the
characters # and *.
If the printer issharingthetelephone line with an answering machine, then make sure that the following
are set:
• Auto Answer is On.
• The printer picks up on a greater number of rings than the answering machine.
• The printer picks up on the correct distinctive ring (if you subscribe to a distinctive ring service).
If the printer is sharing the telephone line with a telephone subscribed to voice mail, then make sure
that the following are set:
• Auto Answer is Off (if you have only one number on the telephone line).
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
55
• The correct printer port is selected.
Cannot run the fax software
The printer must be connected to a telephone, DSL, VoIP, or cable service before you can configure the
fax settings in the fax software.
• The computer and printer are both connected to the same wireless network.
• The printer is located away from obstacles or electronic devices that could interfere with the wireless
signal.
Make sure the printer and access point are not separated by poles, walls, or support columns
containing metal or concrete.
MAKE SURE A FAX DRIVER IS INSTALLED
The fax option is available for use only with the PostScript driver or the Universal Fax Driver. For
information on installing these drivers, see the Software and Documentation CD.
Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones,
security system cameras, other wireless networks, and some Bluetooth devices.
MAKE SURE THE PRINTER IS CONNECTED TO A TELEPHONE LINE
Printing a network setup page
A network setup page lists the configuration settings of the printer, including the IP address and MAC
You need to connect the printer to your telephone line (through a standard wall jack, a DSL filter, a
VoIP adapter, or a cable modem) before you can open the fax software and configure the fax settings.
address of the printer.
1 Load plain paper.
Wireless troubleshooting
If you are having trouble setting up your printer on a network, then print a network setup page, and then
2 From the printer control panel, navigate to:
OK
OK
OK
> Setup >
> Network Setup >
> Print Network Setup Page >
see the comprehensive User's Guide available on the Software and Documentation CD.
Also, make sure to check the network indicator lights to verify the connection status of the printer. For
more information on the location of the network indicator lights, see“Using the printer control panel” on
page 14.
Locating IP addresses
For Windows users
Wireless troubleshooting checklist
1 Open the command window.
Before beginning to troubleshoot the wireless printer, verify the following:
• The printer, the computer, and the access point (wireless router) are all plugged in and turned on.
• The wireless network is working properly.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type cmd> OK
Try accessing other computers on your wireless network.
In Windows 7 or earlier
If your network has Internet access, then try connecting to the Internet over a wireless connection.
• Your SSID is correct.
a
b
c
Click
, or click Start and then click Run.
Print a network setup page to verify the SSID the printer is using.
If you are not sure if your SSID is correct, then run the wireless setup again.
• Your WEP key or WPA passphrase is correct (if your network is secure).
Log on to the access point and check the security settings.
In the Start Search or Run dialog, type cmd.
Press Enter, or click OK.
2 Type ipconfig, and then select Go or Enter.
The IP address appears as four sets of numbers separated by periods, such as 123.23.123.123.
A security key is like a password. All devices on the same wireless network using WEP, WPA, or WPA2
share the same security key.
For Macintosh users
If you are not sure if your security information is correct, then run the wireless setup again.
1 From the Apple menu, navigate to:
• The printer and the computer are within the range of the wireless network.
About This Mac > More Info
For most networks, the printer and the computer should be within 100 feet (30 meters) of the access
point (wireless router).
2 From the Contents pane, choose Network.
• The Wi‑Fi indicator is green and successfully connected.
3 If you are connected over a wireless network, then choose AirPort from the Active Services list.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
56
Locating the printer IP address
• You can locate the printer IP address by viewing the printer network setup page. See the User's
Guide on the software installation CD for more information on printing a network setup page.
CHECK IF YOUR ACCESS POINT HAS AN ASSOCIATION/REGISTRATION BUTTON
Wireless broadband boxes in Europe, the Middle East, and Africa such as Livebox, AliceBox, N9UF Box,
Freebox, or Club Internet may require you to press an association/registration button when adding the
printer to your wireless network.
Cannot print over wireless network
If you encountered problems while installing, or if your printer does not appear in the printers folder or
as a printer option when sending a print job, then try uninstalling and reinstalling the software.
If you are using one of these boxes and need more information, then see the documentation that came
with your box, or contact your internet service provider (ISP).
MOVE YOUR ACCESS POINT AWAY FROM OTHER ELECTRONIC DEVICES
There may be temporary interference from electronic devices such as microwave ovens or other
appliances, cordless phones, baby monitors, and security system cameras. Make sure your access point
is not positioned too closely to these devices.
Before you reinstall the software, check the troubleshooting checklist, and then try one or more of the
following:
TURN THE ACCESS POINT (WIRELESS ROUTER) OFF AND THEN BACK ON
Wait one minute for the printer and computer to reestablish the connection. This can sometimes
refresh network connections and resolve connectivity issues.
MOVE THE COMPUTER, PRINTER, OR BOTH CLOSER TO THE ACCESS POINT
The range of your wireless network depends on many factors, including the abilities of your access
point and network adapters. If you are having trouble printing, then try placing the computer and
printer no more than 100 feet apart.
DISCONNECT FROM YOUR VPN SESSION
When you are connected to another network through a VPN connection, you will not be able to access
the printer over your wireless network. End your VPN session, and then try printing again.
CHECK THE WIRELESS SIGNAL QUALITY
Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent,
then another factor is causing the problem.
MAKE SURE DEMO MODE IS TURNED OFF
Select printer features are not available when Demo Mode is turned on.
CHECK YOUR ADVANCED SECURITY SETTINGS
From the printer control panel, navigate to:
• If you are using MAC (Media Access Control) address filtering to limit access to your wireless
network, then you must add the printer MAC address to the list of addresses allowed to connect
to the access point.
OK
OK
OK
> Setup >
> Demo Mode >
> Off >
CHECK YOUR WEP KEY OR WPA PASSPHRASE
• If you set the access point to issue a limited number of IP addresses, then you must change this so
that the printer can be added.
If your access point is using WEP security, then the WEP key should be:
• Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.
Note: If you do not know how to make these changes, then see the documentation that came with
the access point, or contact the person who set up your wireless network.
or
• Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a
keyboard. ASCII characters in a WEP key are case‑sensitive.
MAKE SURE YOUR COMPUTER IS CONNECTED TO YOUR ACCESS POINT
• See if you have access to the Internet by opening your Web browser and accessing any site.
If your access point is using WPA or WPA2 security, then the WPA/WPA2 preshared key/passphrase
should be:
• If there are other computers or resources on your wireless network, then check to see if you can
access them from your computer.
• Exactly 64 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.
or
MAKE SURE THAT YOUR COMPUTER AND PRINTER ARE CONNECTED TO THE SAME WIRELESS
NETWORK
• From 8 to 63 ASCII characters. ASCII characters are letters, numbers, and symbols found on a
keyboard. ASCII characters in a WPA passphrase are case‑sensitive.
If the printer is not on the same wireless network as the computer, then you will not be able to print
wirelessly. The SSID of the printer must match the SSID of the computer, if the computer is already
connected to the wireless network.
Note: If you do not know this information, then see the documentation that came with the access
point, or contact your system support person.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
57
For Windows users
2 Write down the SSID.
1 Obtain the SSID of the network that the computer is connected to.
In Mac OS X version 10.4 or earlier
a
Type the IP address of your access point into the address field of your Web browser.
1 From the Finder, navigate to:
If you do not know the IP address of the access point, then do the following:
1 Open the command window.
Applications > Internet Connect > AirPort
The SSID of the network that the computer is connected to appears in the Network menu.
In Windows 8
2 Write down the SSID.
From the Search charm, type Run, and then navigate to:
Apps list > Run > type cmd> OK
For Macintosh users with an access point
1 Type the IP address of the access point in the address field of your Web browser, and then continue
to step 2.
In Windows 7 or earlier
If you do not know the IP address of the access point, then do the following:
a
b
c
Click
, or click Start and then click Run.
a
From the Apple menu, navigate to either of the following:
• System Preferences > Network > AirPort
• System Preferences > Network > Wi‑Fi
Click Advanced or Configure.
In the Start Search or Run dialog, type cmd.
Press Enter, or click OK.
The command window opens.
2 Type ipconfig, and then press Enter. Check the Wireless Network Connection section:
b
c
• The “Default Gateway” entry is typically the access point.
Click TCP/IP.
• The IP address appears as four sets of numbers separated by periods, such as
The Router entry is typically the access point.
192.168.2.134.
2 Type your user name and password when prompted, and then click OK.
b
c
Type the user name and password of the access point when prompted.
Click OK.
3 In the Wireless settings section, look for the SSID.
d
e
In the Wireless settings section, look for the SSID.
Write down the SSID.
4 Write down the SSID, security type, and the WEP key or WPA/WPA2 preshared key/passphrase (if
shown).
Notes:
Note: Make sure you copy it exactly, including any capital letters.
• Make sure you copy the network information down exactly, including any capital letters.
2 Obtain the SSID of the network that the printer is connected to:
• Store the SSID and the WEP key or WPA/WPA2 preshared key/passphrase in a safe place for
future reference.
a
b
From the printer, print a network setup page.
In the Wireless section, look for SSID.
3 Compare the SSID of the computer and SSID of the printer.
MAKE SURE YOUR OPERATING SYSTEM IS COMPATIBLE WITH WIRELESS PRINTING THROUGH
AIRPORT
The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or
later.
If the SSIDs are the same, then the computer and the printer are connected to the same wireless
network.
If the SSIDs are not the same, then run the utility again to set up the printer on the wireless network
used by the computer.
For Macintosh users with an AirPort base station
In Mac OS X version 10.5 or later
1 From the Apple menu, navigate to either of the following:
• System Preferences > Network > AirPort
• System Preferences > Network > Wi‑Fi
The SSID of the network that the computer is connected to appears in the Network Name menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
58
From the printer control panel, navigate to either of the following:
“Communication not available” message appears when printing
wirelessly
OK
OK
OK
–
> Setup >
> Network Setup >
> Wireless 802.11 b/g/n >
> Network Connection
OK
OK
OK
Setup >
> TCP/IP >
> IP Address >
Try one or more of the following:
OK
OK
OK
–
> Setup >
> Network Setup >
> Ethernet 10/100 >
> Network Connection
OK
OK
OK
MAKE SURE YOUR COMPUTER AND PRINTER HAVE VALID IP ADDRESSES FOR THE NETWORK
Setup >
> TCP/IP >
> IP Address >
If the printer or the laptop does not have an IP address, or if either has an address of 169.254.x.y (where
x and y are any two numbers between 0 and 255), then do the following:
If you are using alaptop and have power saving settingsenabled, thenyou may seethe ”Communication
not available” message on your computer screen when you attempt to print wirelessly. This can occur
if the laptop hard drive has powered down.
1 Turn off the device that does not have a valid IP address (the laptop, the printer, or both).
If you see this message, then wait a few seconds and then try to print again. The laptop and printer
require a few seconds to power up again and reconnect to the wireless network.
2 Turn on the device, and then check the IP addresses again.
If the printer or the laptop still does not receive a valid IP address, then there is a problem with your
wireless network. Try the following:
If you see this message again after you have waited long enough for the printer and the laptop to
connect to the network, then there may be a problem with your wireless network.
• Make sure your access point (wireless router) is turned on and is working.
Make sure that the laptop and printer have both received IP addresses:
• Remove any objects that could be blocking the signal.
For Windows users
• Temporarily turn off any unnecessary wireless devices on your network and pause any
network‑intensive activities, like large file transfers or network games. If the network is too busy,
then it is possible that the printer is not receiving the IP address within the allowed time.
1 Open the command window.
In Windows 8
• Make sure your DHCP server, which may also be your wireless router, is working and is configured
to assign IP addresses. If you are not sure how to do this, then refer to the manual that came with
your wireless router.
From the Search charm, type run, and then navigate to:
Apps list > Run > type cmd> OK
If the printer and computer have valid IP addresses and the network is operating correctly, then
continue troubleshooting.
In Windows 7 or earlier
a
b
c
Click
, or click Start and then click Run.
MAKE SURE THE WIRELESS PORT IS SELECTED
In the Start Search or Run dialog, type cmd.
Note: This solution applies to Windows users only.
Press Enter, or click OK.
1 Open the printers folder.
2 Type ipconfig, and then press Enter.
In Windows 8
The IP address appears as four sets of numbers separated by periods, such as 192.168.0.100.
From the Search charm, type run, and then navigate to:
For Macintosh users
Apps list > Run > type control printers> OK
1 From the Apple menu, navigate to:
In Windows 7 or earlier
About This Mac > More Info
2 From the Contents pane, choose Network.
a
b
c
Click
, or click Start and then click Run.
3 If you are connected over a wireless network, then choose AirPort from the Active Services list.
The Router entry is typically the access point.
In the Start Search or Run dialog, type control printers.
Press Enter, or click OK.
2 Right‑click the printer, and then select Printer properties (for Windows 7 or later) or Properties
Locating the printer IP address
(earlier versions).
• From the printer, print a network setup page.
In the TCP/IP section, look for Address.
• View the printer settings.
3 Click the Ports tab, and then locate the selected port.
The selected port has a check mark beside it in the Port column.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
59
4 If the Description column of the selected port indicates that it is a USB port, then scroll through the
list and select the port with Printer Port in the Description column. Check the printer model in the
Printer column to make sure you select the right printer port.
• Make sure all switches, hubs, and other connecting devices are turned on.
MAKE SURE THE PRINTER HAS VALID NETWORK SETTINGS
5 Click OK, and then try to print again.
Print a network setup page from the printer and check the following. See the “Networking” section of
the User's Guide for instructions on how to print a network setup page.
MAKE SURE BIDIRECTIONAL COMMUNICATION IS ENABLED
• Verify that the IP address is correct for your network.
• Verify that the gateway is correct.
Note: This solution applies to Windows users only.
• Verify that thenetwork mask isthe sameas the network mask usedfor othercomputersandprinters
on your network.
1 Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Cannot print to the network printer
Apps list > Run > type control printers> OK
CHECK THE ETHERNET CABLE
In Windows 7 or earlier
• Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
• Firmly plug one end of the Ethernet cable into the printer. Firmly plug the other end of the Ethernet
a
b
c
Click
, or click Start and then click Run.
cable into the network hub or wall connection.
In the Start Search or Run dialog, type control printers.
• Try using a different cable. Damage to the cable may not be obvious.
Press Enter, or click OK.
MAKE SURE THE PRINTER POWER IS ON
2 Right‑click the printer, and then select Properties (for Windows Vista or earlier) or Printer
properties (for Windows 7 or later).
Make sure the printer is connected to a power source and is turned on.
3 Click the Ports tab.
MAKE SURE THAT THE NETWORK IS OPERATING PROPERLY
4 Click the box next to Enable bidirectional support if it is not already checked.
5 Click Apply > OK, and then try to print again.
• Try to access other computers on the network.
• Make sure all switches, hubs, and other connecting devices are turned on.
Ethernet network troubleshooting
UNINSTALL AND REINSTALL THE SOFTWARE
See the “Reinstalling the printer software” section of the User’s Guide.
Printer does not appear in the list of printers found on the network
CHECK THE ETHERNET CABLE
• Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
• Firmly plug one end of the Ethernet cable into the printer. Firmly plug the other end of the Ethernet
cable into the network hub or wall connection.
• Try using a different cable. Damage to the cable may not be obvious.
MAKE SURE THE PRINTER POWER IS ON
Make sure the printer is connected to a power source and is turned on.
MAKE SURE THAT THE NETWORK IS OPERATING PROPERLY
• Try to access other computers on the network.
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
60
Federal Communications Commission (FCC) compliance information
statement
Notices
This product complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Edition notice
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired
operation.
October 2012
The following paragraph does not apply to any country where such provisions are inconsistent with
local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.
Any questions on this statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
This publication could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in later editions. Improvements or
changes in the products or the programs described may be made at any time.
(859) 232-3000
For additional compliance information, see the online documentation.
References in this publication to products, programs, or services do not imply that the manufacturer
intends to make these available in all countries in which it operates. Any reference to a product, program,
or service is not intended to state or imply that only that product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any existing intellectual
property right may be used instead. Evaluation and verification of operation in conjunction with other
products, programs, or services, except those expressly designated by the manufacturer, are the user’s
responsibility.
Federal Communications Commission (FCC) compliance information
statement
This product complies with Part 68 of the FCC Rules. See the product online documentation for additional
compliance information.
© 2012 Lexmark International, Inc.
All rights reserved.
GOVERNMENT END USERS
The Software Program and any related documentation are "Commercial Items," as that term is defined
in 48 C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such
terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212
or 48 C.F.R. 227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and
Commercial Software Documentation are licensed to the U.S. Government end users (a) only as
Commercial Items and (b) with only those rights as are granted to all other end users pursuant to the
terms and conditions herein.
Trademarks
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in
the United States and/or other countries.
All other trademarks are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
61
print job 24
scan job 30
distinctive ring
setting 40
documents
adding a network folder shortcut 28
faxing using the computer 41
printing 23
scanning using the printer control panel 28
scanning using the touch screen 28
DSL filter 34
VoIP 34
fax troubleshooting
cannot receive faxes 54
cannot run fax software 55
cannot send faxes 53
fax troubleshooting checklist 53
faxing
Auto Answer setting 39
receiving automatically 42
receiving manually 42
sending a broadcast fax immediately 41
sending using the control panel 41
setting sender information 39
tips, receiving 41
cannot delete documents from print queue 52
cannot print over wireless network 56
cannot print through USB 52
cannot receive faxes 54
card reader light
A
adding
network folder shortcut 28
Additional Solutions
Address Book 40
Address Book Setup
customize printer settings using 46
ADF input tray
location 12
cartridges, ink
ordering 17
duplex
copying, automatic 26
printing, automatic 23
duplex unit
location 12
checking an unresponsive printer 50
checking the dial tone 39
checklist
fax troubleshooting 53
cleaning printhead nozzles 18
message 58
configuring Wi‑Fi Protected Setup
PBC, Push Button Configuration method 44
PIN, Personal Identification Number method 44
conserving energy, ink, and paper 5
contact list
creating 40
copies
making 26
copy job
canceling 27
Copy Settings
customize printer settings using 46
copying 26
on both sides of the paper 26
tips 26
aligning the printhead 18
answering machine
Automatic Document Feeder (ADF)
location 13
tips, sending 41
using the computer 41
using the control panel 41
faxing tips
receiving faxes automatically 42
FCC notices 60
features, printer 6
file types
supported 15
finding
information 5
publications 5
Web site 5
finding IP address of computer (Mac) 55
flash drive
inserting 15
printing documents from 24
scanning to 29
E
Embedded Web Server
accessing 46
energy
conserving 5
Ethernet port
location 13
exit bin
location 13
EXT port
location 13
B
enabling 58
bin extender
location 13
broadcast fax, sending
immediately 41
Address Book 15
arrow buttons 14
Back 14
Black 15
Cancel 15
Color 15
Dial Tone 14
Home 14
keypad 14
Pause 14
Power 14
Redial 14
Select 14
Start 15
e‑mail
canceling 31
E‑mail Alert Setup
customize printer settings using 46
e‑mail function
setting up 31
G
E‑mail/FTP Settings
customize printer settings using 46
e‑mailing
General Settings
customize printer settings using 46
Group List 40
customer support 50
customer support label
location 13
scanned documents 29
setting up e‑mail function 31
tips 31
H
header bar 46
home page
areas 46
D
Device Management
customize printer settings using 46
dial tone
F
Fax Settings
understanding 46
C
customize printer settings using 46
fax setup
country‑ or region‑specific 36
checking 39
digital telephone service
fax setup 35
Caller ID
setting 39
canceling
copy job 27
e‑mail 31
I
Import/Export
customize printer settings using 46
incorrect language appears on display 50
standard telephone line connection 32
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
62
information
finding 5
information pane 46
information you will need during wireless
setup 43
network setup page
printing 55
network troubleshooting
printer
features 6
models 5
moving 18
setting up 6
printer control panel
buttons 14
network setup page 55
on both sides of the paper 23
photos from a memory card or flash drive 24
two‑sided 23
printing using advanced color options 23
publications
ink
conserving 5
finding 5
ink cartridges
ordering 17
replacing 17
inserting a memory card or flash drive 15
installation screen did not appear
automatically 50
installing printer software (Windows) 19
Intervention Management
customize printer settings using 46
networking
finding IP address of computer 55
finding IP address of computer (Mac) 55
finding IP address of printer 55
IP addresses 55
display 14
layout 14
location 13
using 14
Wi‑Fi indicator 15
printer does not respond 52
printer features 6
Push Button Configuration method
using 44
R
receiving faxes
Auto Answer setting 39, 42
automatically 42
manually 42
notices 2, 60
printer models 5
P
tips 42
printer printing blank pages 52
printer problems, basic solutions 50
printer settings, customizing
Address Book Setup 46
Copy Settings 46
Device Management 46
E‑mail Alert Setup 46
E‑mail/FTP Settings 46
Fax Settings 46
Intervention Management 46
Manage Profiles 46
Manage Shortcuts 46
Network/Ports 46
Paper Setup 46
page does not print 51
paper
recommended paper brands
types and sizes 22
recovering the security PIN 51
recycling 5
replacing ink cartridges 17
RJ‑11 adapter 36
conserving 5
customize printer settings using 46
paper tray
L
language
changing 50
LexPrint 25
line filter 34
LINE port
location 13
location 13
paper, recommended brands
parts
diagram 12
PDF
creating from scan 29
Personal Identification Number method
using 44
phone book 40
phone plug 36
S
safety information 2, 32
scan job
canceling 30
scanner glass
location 13
scanning
Macintosh printer software
using 20
Manage Profiles
creating a PDF from scan 29
documents for e‑mailing 29
tips 28
to a flash drive 29
to a local computer 28
to a memory card 29
to a network 28
to a network folder 28
using the printer control panel 28
using the touch screen 28
Scan‑to‑Network Folder Setup
customize printer settings using 46
Security
customize printer settings using 46
security PIN
recovering 51
selecting the wireless port 58
sender information
registering 39
customize printer settings using 46
Manage Shortcuts
customize printer settings using 46
memory card
inserting 15
printing documents from 24
scanning to 29
supported types 15
memory card slot
location 12
minimum system requirements 19
models, printer 5
Print Settings 46
phone splitter 34
photos
Scan‑to‑Network Folder Setup 46
Security 46
printing from a memory card or flash drive 24
PictBridge and USB port
location 12
power supply port
location 13
Print dialog
launching 20
print job
canceling 24
Print Settings
printer software, installing (Windows) 19
printer to be configured does not appear in list of
printers found on network 59
printers
supported 25
printhead
aligning 18
cleaning 18
printing
customize printer settings using 46
N
documents 23
documents from memory card or flash drive 24
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
63
sending faxes, tips 41
setting
number of rings 40
wireless network 55
troubleshooting, fax
cannot receive faxes 54
cannot run fax software 55
cannot send faxes 53
Phone Book 20
Printer Home 20
Printer Setup Utility 20
Printing Preferences 20
Product Update 20
Status Messenger 20
Status Monitor Center 20
Tools for Office 20
setting up fax
DSL connection 34
standard telephone line connection 32
VoIP connection 34
troubleshooting, network
cannot print to network printer 59
troubleshooting, print
Wireless Setup Utility 20
wireless network
setting up printer 6
setup troubleshooting
cannot print through USB 52
incorrect language appears on display 50
installation screen did not appear
automatically 50
page does not print 51
printer does not respond 52
printer printing blank pages 52
recovering security PIN 51
shortcut
cannot delete documents from print queue 52
troubleshooting, setup
cannot print through USB 52
incorrect language appears on display 50
installation screen did not appear
automatically 50
information you will need for setting up
wireless printing 43
troubleshooting 55
wireless setup
information needed for 43
Wireless Setup Assistant
launching 44
Wireless Setup Assistant (Macintosh only)
installing 44
Wireless Setup Assistant (Macintosh)
using 44
Wireless Setup Utility
launching 44
page does not print 51
recovering security PIN 51
software did not install 51
troubleshooting, wireless
creating 48
two‑sided
Wireless Setup Utility (Windows only)
installing 43
copying, automatic 26
using shortcuts on printer 49
shortcuts page
launching 48
software did not install 51
Speed Dial list 40
supported memory cards and file types 15
supported operating systems 19
supported printers 25
two‑sided printing
Wireless Setup Utility (Windows)
using 43
wireless troubleshooting
Wi‑Fi Protected Setup
configuring manually 44
using 44
supported paper sizes and paper types 23
U
USB port
location 13
using
Wireless Setup Utility 44
Wi‑Fi Protected Setup logo
identifying 44
T
V
telecommunication notices 60
tips for
copying 26
voice mail
setting up 32
Voice over Internet Protocol (VoIP)
fax setup 34
e‑mailing 31
receiving faxes 41
VoIP adapter 34
sending faxes 41
Transmit Terminal Identification (TTI)
W
Web Links
accessing 20
Web site
Windows software
Abbyy Sprint OCR 20
troubleshooting
checking an unresponsive printer 50
contacting customer support 50
fax checklist 53
solving basic printer problems 50
Download from Www.Somanuals.com. All Manuals Search And Download.
|