AM/FM RADIO CASSETTE RECORDER
MODEL CT-992
OPERATING INSTRUCTIONS
CASSETTE PLAYER/RECORDER
AM/FM RADIO RECEIVER
ONE-TOUCH CASSETTE RECORDING
AUTOMATIC LEVEL CONTROL
ROTARY VOLUME CONTROL
BUILT-IN CONDENSER MICROPHONE
2 WAY POWER - AC/DC
FULL SIZE FOLDING HANDLE
PLEASE READ CAREFULLY BEFORE USE
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL SAFETY INSTRUCTIONS
1. Power Sources - The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
2. Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
3. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids
are not spilled into the enclosure through openings.
4. Servicing - The user should not attempt to service the appliance beyond that described
in the operating instructions. All other servicing should be referred to qualified service
personnel.
It is the intent of Lenoxx that this product be used in full compliance with the
copyright laws of the United States and that prior permission be obtained from
copyright owners whenever recording songs from the RADIO.
Do not apply oil or petroleum products or solvents to any part of this set.
2
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR
SET, READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the type and size of batteries mentioned in the operating instructions
booklet (batteries are not included with this set, please buy the proper batteries).
2. Do not dispose the batteries into a fire. The cells may explode. Check with local
codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may be toxic if swallowed.
4. Be careful when handling batteries in order not to short the battery with conducting
materials such as rings, bracelets and keys. The battery or conductor may over
heat and cause burns.
5. Do not attempt to recharge non-rechargeable batteries. The batteries may leak
corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this product by
heating them. Sudden release of the battery electrolyte may cause burns or
irritation to eyes or skin.
7. All batteries should be replaced at the same time. Mixing fresh and discharged
batteries could increase internal cell pressure and rupture the batteries.
8. When inserting batteries into this product, the proper polarity (
and
) or
direction must be observed. Reverse insertion of some or all of the batteries may
result in battery electrolyte leakage or explosion.
9. Remove the batteries from this product if the product will not be used for a long
period of time (several months or more) since during the period the batteries could
leak, damaging the product.
10. Discard weak or dead batteries as soon as possible since they are more likely to
leak in the product. Batteries should be replaced (depending on the product) when
the display gets dim or if the Low Battery Indicator shows or if the sound gets
distorted.
11. Do not store this product in high temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be protected
from condensation during storage and defrosting. Batteries should be stabilized at
room temperature prior to use after cold storage.
12. If this product does not operate normally, see TROUBLE SHOOTING in this manual.
If you cant resolve the problem, or if the product is damaged, refer to the LENOXX
WARRANTY INFORMATION. Opening or removing covers may expose you to
dangerous voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
13. If liquid leaks from the batteries, carefully wipe this liquid. Do not allow it to touch your
skin, and discard the leaking batteries.
14. Do not mix batteries (OLD and NEW or CARBON and ALKALINE, etc.).
15. The use of rechargeable batteries is not recommended for this set because their
voltage and life is lower than standard batteries.
16. Installation of batteries should be done by an adult only.
SAVE THESE INSTRUCTIONS
3
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
Battery compartment
To a wall outlet
BATTERY DOOR
NOTE: One blade of plug
& outlet is wider.
TIP
1. Connecting the AC Power Cord
Open the BATTERY COMPARTMENT DOOR, stretch the
AC power cord out, and insert the AC PLUG into the wall
outlet.
The plug of the AC power cord
is polarized and only fits one
way into the wall outlet. If this
plug does not match your
outlet, do not force it. Reverse
it and try again.
2. Operate the Set on Batteries
Insert 4 size C batteries (not included) into the battery
compartment.
C
C
C
C
NOTE
To install the batteries properly
into the compartment, first place
the AC plug into the slot, then fold
the excess cord carefully into the
battery compartment. Then
install batteries.
4
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO THE RADIO
3
2
1&4
Connect the supplied AC power cord or batteries (see page 4).
Slide the FUNCTION SWITCH to AM
or FM position.
1
RADIO OFF
TAPE
AM
FM
TUNING
Tune into the station you prefer using
the TUNING control. Adjust for the
clearest sound.
2
3
Adjust the volume level by rotating the
VOLUME control.
To turn off the Radio, slide the
FUNCTION switch to TAPE (RADIO
OFF) position.
4
RADIO OFF
TAPE
AM
FM
TIP: To improve broadcast reception, change position of the
antenna for FM and rotate the player itself for AM.
5
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A TAPE
1
3
2
Connect the supplied AC power cord or batteries (see page 4).
Slide the FUNCTION
switch to TAPE (RADIO
OFF) position.
1
RADIO OFF
TAPE
AM
FM
Press the STOP/EJECT
button to open the tape
compartment and insert
a recorded tape. Close
the door.
EMPTY
REEL
FULL
REEL
2
STOP/EJECT
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
Press the PLAY button.
The player turns on and
starts playing.
PLAY
3
6
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
USE
THESE
BUTTONS
FOR
ADDITIONAL OPERATIONS
VOLUME
CONTROL
PAUSE
STOP/
EJECT
FAST FORWARD
& REWIND
PLAY
TIP
To
Press or Adjust
When the tape finishes playing
that side of the tape, the set will
stop and the PLAY button will
pop up. To hear the other side,
flip the tape over, then insert and
press PLAY, or press REWIND
then PLAY to hear the same
song again.
Adjust the volume
Stop playback
VOLUME control
STOP/EJECT button
FAST FORWARD button
or REWIND button
Fast forward or rewind
the tape
PAUSE button
Press again to resume
play after pause.
Pause playback
Eject the cassette
STOP/EJECT button
Insert your headphone
plug into the HEADPHONE
jack
To enjoy the music without
disturbing others
HEADPHONE JACK
NOTE: Headphones are not included with this set.
7
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING ON A TAPE
2
MICROPHONE
1
3
Connect the supplied AC power cord or batteries (see page 4).
INSERT TAPE THIS WAY
FULL REEL ON RIGHT
1
2
STOP/EJECT
Press the STOP/EJECT button to
open the tape compartment and
insert a blank tape. Select the
program source (AM, FM or built-in
microphone) you want to record.
To record from radio, slide the
FUNCTION switch to AM or FM
position, and tune into the station
you want.
RADIO OFF
TAPE
FM
AM
To record from the built-in
microphone, leave the FUNCTION
switch at TAPE position, and speak
in front of the set.
RADIO OFF
TAPE
FM
AM
Press the RECORD button to start
recording. (The PLAY button is
depressed automatically.)
RECORD
3
8
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
USE
THESE
BUTTONS
FOR
ADDITIONAL OPERATIONS
FUNCTION
SWITCH
STOP/
EJECT
PAUSE
TIP
To
Press or Adjust
Adjusting the VOLUME
control will not affect the
recording level.
Stop recording
STOP/EJECT button
PAUSE button
Press the button again to
resume recording.
For best recording effect, use
AC power instead of
batteries.
Pause recording
To erase
just start
a
a
recording,
new one,
Press the STOP/EJECT button
and slide the FUNCTION
switch to TAPE (RADIO OFF)
position.
and the old recording
is automatically replaced.
Turn off the power
9
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
On Safety
Notes on Cassette
Break off the cassette tab from side A or
Should any solid object or liquid fall
B to prevent accidental recording. If you
want to reuse the tape for recording,
cover the broken tab with adhesive tape.
into the set, disconnect the power, and
have it checked by qualified personnel
before operating it any further.
California Proposition 65 Warning:
Side A
This product contains chemicals known
to the state of California to cause cancer,
and birth defects or other reproductive
harm.
Wash Hands After Handling.
Tab for side A
Tab for side B
On Placement
Do not leave the set in a location
near heat source, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
To record on a tape with its tab broken
off, cover the respective tab hole for side
A or B with adhesive tape.
Do not place the set on an inclined
or unstable place.
Use of a cassette with more than 90
minutes, such as C-120 (120
minutes), is not recommended. The
extreme thinness of this tape may
damage this set.
Do not place anything within 1 inch of
the back of the cabinet. The ventilation
holes must be unobstructed for the
set to operate properly and prolong
the life of its components.
To reduce the chances of tape jamming
or tangling, you should check that there
are no loose layers of tape visible
through the cassette center window. If
any, tighten these loose layers of tape
using a pencil before inserting the
cassette into the set.
If the set is left in a car parked in
the sun, be sure to choose a location
in the car where the set will not be
subjected to the direct rays of the sun.
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or spring-
wound watches away from the set
to prevent possible damage from the
magnet.
On Power Sources
For battery operation, use 4 size C
batteries. We recommend alkaline
batteries for longer life.
When the batteries are not to be used,
remove them to avoid damage that can
be caused by battery leakage or
corrosion.
The nameplate indicating operating
voltage, power consumption, etc. is
located at the back of the set.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CT992(NL)-WM-E-031103
MAINTENANCE
Cleaning the Tape Heads
Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened
with cleaning fluid or alcohol after every 10 hours of operation for optimum playback
and recording quality.
After cleaning, insert a tape when the areas cleaned are completely dry.
NOTE: In order to see and
clean the head, you
may have to press
PLAY first.
Notes for Storing Cassette Tapes
1. Do not put a tape near a magnetic field, such as a TV, or speaker. Magnetic
fields may reduce the tape sensitivity or even erase the recording.
2. Do not store tape for any length of time in a hot, moist or dusty place.
Cleaning the Cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent,
such as alcohol or benzene.
11
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Problem
Remedy
Connect the AC power cord to a wall outlet
securely.
The power is not on.
There is no sound.
Make sure the batteries are inserted
correctly and they are fresh.
Make sure the FUNCTION switch is in
the correct position.
Adjust the volume.
Unplug the headphone when listening
through speakers.
Replace all the batteries with fresh ones if
they are weak, or bring the set near a
window, or rotate the set (for AM) or adjust
the FM antenna for best FM reception.
The sound is weak or poor
quality.
Make sure the safety tab on the cassette is
in place.
Make sure the FUNCTION switch is at
TAPE position.
The RECORD button does not
function/The tape does not play.
Clean the erasing head.
Replace all the batteries with fresh ones if
they are weak.
The tape does not erase
completely.
Make sure the tape is inserted properly.
Make sure the cassette tab is in place.
The tape does not record.
The sound is weak / The sound
quality is poor.
Clean the heads, pinch roller and capstan.
The tape has reached its end. Remove it,
flip to the other side, re-insert and press
PLAY.
Cassette PLAY button pops up.
Use only better quality tapes.
Do not use a cassette with more than 90
minutes.
Tape jamming or tangling.
Make sure there are no loose layers of tape
visible before inserting the cassette.
NOTE: Normal battery life using alkaline batteries is about 8 hours of playing time.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A CLOTH OR OTHER PROTECTIVE MATERIAL BE PLACED
UNDER THE SET WHEN PLACING IT ON SURFACE WITH A NATURAL OR LACQUER
FINISH.
For Customer Service Dial 1-800-315-5885
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
IB-CT992(NL)-WM-E-031103
SPECIFICATION
General Description
AC 120V, 60Hz 6 Watts
DC 6V (4 size C batteries)
Power source:
(we recommend alkaline batteries for longer life)
Speakers:
3 DYNAMIC
Output power:
Dimensions:
600mW
3
Width: 11 /
Depth: 4
Height: 6 /
Weight: 3 LBs (without batteries)
4
1
4
Tape Recorder Section
Tape:
Standard normal bias cassette tape
Frequency response: 70 Hz - 10 kHz
Wow & flutter:
0.35% W.R.M.S.
Radio Section
Frequency range:
FM: 88 - 108 MHz
AM: 530 - 1700 kHz
LENOXX reserves the right to make design and specification changes for product
improvement.
LIMITED WARRANTY
We warrant this product to be free from defects in material and workmanship under
normal use for a period of 90 days after purchase and we will repair it free of charge or
replace it at no charge, should it become defective under this warranty, providing you
submit proof of purchase (sales slip) with the set.
During the initial 90 day period after original purchase, we will service or exchange, at
no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90
days period expires, and for a period of 12 months from original purchase we will repair the
unit covering any part(s) that need to be replaced at no charge, but will charge for the cost
of labor, return postage paid by Lenoxx.
This warranty does not apply to any product which has been subject to misuse, neglect
or accident. This warranty does not cover a broken cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORP. BE LIABLE FOR ANY INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. The following charges apply to repairs beyond the warranty period:
$5.00. Be sure to pack carefully and return postage paid insured together with your money
order (personal checks will not be accepted) and sales receipt to:
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET, N.J. 07008
© 2003 LENOXX ELECTRONICS CORP.
2 GERMAK DRIVE
CARTERET, N.J. 07008
MADE & PRINTED IN CHINA
13
IB-CT992(NL)-WM-E-031103
Download from Www.Somanuals.com. All Manuals Search And Download.
|