L2262 Wide Flat Panel Monitor
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Chapter1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Attaching the base and handling your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cable lock slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Setting up yourmonitor . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- .
Connecting and turning on your monitor . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Chapter 2. Adjusting and using your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Comfort and accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Arranging your work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Positioning and viewing your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Quick tips for healthy work habits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Adjusting your monitor image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Using the direct access controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Using the On-Screen Display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Selecting a supported display mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Understanding power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Caring for your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3. Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Monitor specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Manual image setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Manually installing the monitor driver . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Appendix A. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Telephone technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Contents ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety information
For tips to help you use your computer safely,go to:
Before installing this product, read the Safety information.
DANGER
To avoid shock hazard:
ꢀ Do not remove the covers.
v
v
v
v
ꢀ
Do not operate this product unless the stand is attached.
ꢀ Do not connect or disconnect this product during an electrical storm.
ꢀ The power cord plug must be connected to a properly wired and grounded power
outlet.
ꢀ Any equipment to which this product will be attached must also be connected to
v
properly wired and grounded power outlets.
ꢀ
v
To isolate the monitor from the electrical supply, you must remove the plug from
the power outlet. The power outlet should be easily accessible.
Handling:
ꢀ If your monitor weighs more than 18kg(39.68 lb), it is recommended that it be
v
moved or lifted by two people.
The following are safety instruction:
While using VESA mount application, the AC inlet must face to down side. Do not
face any other position.
v
Lenovo suggests that standard power line provided by Lenovo should be used
otherwise, Lenovo bears no liability for any problem resulting from the use of the
power line of other manufacturers.
For displays with glossy bezels the user should consider the placement of the display
as the bezel may cause disturbing reflections from surrounding light and bright
surfaces.
Safety information
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Getting started
This User’s Guide contains detailed information of your Flat Panel Monitor. For a
quick overview, please see the Setup Poster that was shipped with your monitor.
Shipping contents
The product package should include the following items:
•
•
•
•
•
Setup Poster
Reference and Driver CD
Flat Panel Monitor
Power Cord
Analog Interface Cable
Chapter 1.
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the base and handling your monitor
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and
can be damaged by rough handling or excessive
pressure.
1.Carefully lays the monitor on a flat surface.
2.Assemble the base with the monitor's stand.
3.Tighten the screws clockwise at the bottom of the base.
Note:To attach a VESA mount, please see
"Detaching the monitor stand" on page 2-9.
Product overview
This section will provide information on adjusting monitor positions, setting user
controls, and using the cable lock slot.
Adjusting the tilt
The illustration below shows the tilt range of the monitor. For more information,
-5
20
Swivel
With the built-in pedesta you can swi el the monitor for the most comfortable
l,
v
viewing angle.
-150o
150o
Chapter 1.
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor controls
Your monitor has controls on the front which are used to adjust the display.
For information on how to use these controls, please see “Adjusting your monitor
Cable lock slot
Your monitor is equipped with a cable lock slot located on the rear of your monitor (in
the lower position). Please see the instructions that come with the cable lock to learn
how to attach it.
Chapter 1.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your monitor
This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information located on page iii before
carrying out this procedure .
1. Power off your computer and all attached devices, and unplug the computer
power cord.
Place the cable into the specific hook indicated in below figure.
3. Connect the digital cable to the DVI connector of the monitor and the other end
on the back of the computer.
Place the cable into the specific hook indicated in below figure.
Chapter 1.
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Insert the power cord into the monitor ,then plug the monitor power cord and the
computer cord into grounded electrical outlets.
4.
Place the cable into the specific hook indicated in below figure.
Note: A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be considered. A
certified power supply cord not lighter than ordinary polyvinyl chloride flexible
cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
5.
Side view after all cables have been placed.
Chapter 1.
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Power on the monitor and the computer.
To install the monitor driver, insert the Reference and Driver CD, click Install
driver, and follow the on-screen instructions.
7.
8.
To optimize your monitor image, press the Automatic Image Setup key.
Automatic image setup requires that the monitor is warmed up for at least 15
minutes. This is not required for normal operation.
Note: If automatic image setup does not establish the image that you prefer,
manual image setup. See “Manual image setup” on page 3-4 .
perform
Registering your option
Thank you for purchasing this Lenovo R product. Please take a few moments to
register your product and provide us with information that will help Lenovo to
better serve you in the future. Your feedback is valuable to us in developing
products and services that are important to you, as well as in developing better
ways to communicate with you. Register your option on the following Web site:
Lenovo will send you information and updates on your registered product unless
you indicate on the Web site questionnaire that you do not want to receive further
information.
Chapter 1.
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Adjusting and using your monitor
This section will give you information on adjusting and using your monitor.
Comfort and accessibility
Good ergonomic practice is important to get the most from your personal computer
and to avoid discomfort. Arrange your workplace and the equipment you use to suit
your individual needs and the kind of work that you perform. In addition, use
healthy work habits to maximize your performance and comfort while using your
computer. For more detailed information on any of these topics, visit the Healthy
Computing Web site at:
Arranging your work area
Use a work surface of appropriate height and available working area to allow you to
work in comfort.
Organize your work area to match the way you use materials and equipment. Keep
your work area clean and clear for the materials that you typically use and place the
items that you use most frequently, such as the computer mouse or telephone, within
the easiest reach.
Equipment layout and setup play a large role in your working posture. The following
topics describe how to optimize equipment setup to achieve and maintain good
working posture.
Positioning your monitor
Position and adjust your computer monitor for comfortable viewing by considering
the following items:
•
Viewing distance: Optimal viewing distances for monitors range from
approximately 510mm to 760mm (20 in to 30 in) and can vary depending on
ambient light and time of day. You can achieve different viewing distances by
repositioning your monitor or by modifying your posture or chair position. Use a
viewing distance that is most comfortable for you.
•
Monitor height: Position the monitor so your head and neck are in a comfortable
and neutral (vertical, or upright) position. If your monitor does not have height
adjustments, you might have to place books or other sturdy objects under the
base of the monitor to achieve the desired height. A general guideline is to
position the monitor such that the top of the screen is at or slightly below your
eye-height when you are comfortably seated. However, be sure to optimize your
monitor height so the line of site between your eyes and the center the monitor
suits your preferences for visual distance and comfortable viewing when your eye
muscles are in a relaxed state.
•
•
Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen
content and to accommodate your preferred head and neck posture.
General location: Position your monitor to avoid glare or reflections on the screen
from overhead lighting or nearby windows.
The following are some other tips for comfortable viewing of your monitor:
•
Use adequate lighting for the type of work you are performing.
Chapter 2.
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Use the monitor brightness, contrast, and image adjustment controls, if equipped,
to optimize the image on your screen to meet your visual preferences.
Keep your monitor screen clean so you can focus on the screen’s contents.
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to
periodically look away from your monitor screen and focus on a far object to allow
your eye muscles to relax. If you have questions on eye fatigue or visual discomfort,
consult a vision care specialist for advice.
Quick tips for healthy work habits
The following information is a summary of some important factors to consider to help
you remain comfortable and productive while you use your computer.
•
Good posture starts with equipment setup: The layout of your work area and the
setup of your computer equipment have a large effect on your posture while
using your computer. Be sure to optimize the position and orientation of your
equipment by following the tips outlined in “Arranging your work area” on page
2-1 so you can maintain a comfortable and productive posture. Also, be sure to
use the adjustment capabilities of your computer components and office furniture
to best suit your preferences now and as your preferences change over time.
•
•
Minor changes in posture can help avoid discomfort: The longer you sit and
work with your computer, the more important it is to observe your working
posture. Avoid assuming any one posture for an extended period of time.
Periodically make minor modifications in your posture to help deter any
discomforts that might arise. Make use of any adjustments that your office
furniture or equipment provide to accommodate changes in posture
Short, periodic breaks help ensure healthy computing: Because computing is
primarily a static activity, it is particularly important to take short breaks from
your work. Periodically, stand up from your work area, stretch, walk for a drink
of water, or otherwise take a short break from using your computer. A short break
from work gives your body a welcome change in posture and helps to ensure you
remain comfortable and productive while you do work.
Chapter 2.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon
Control
Description
Input Change
Switches the video input source.
DDC-CI
Press and hold for 10 seconds to enable or disable
the DDC-CI function.
Exit
Exit from menu
Image Setup
Activates automatic image adjustment.
NOVO VISION
Direct access to NOVO VISION adjustment.
Enter menu
Menu
Mute setting
Press and hold
key, then press key to
turn on/off the monitor volume.
Chapter 2.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Brightness/Contrast
Brightness
Contrast
Exit
Left
Right
Ok
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
to access that
function. If there is a sub-menu, you can move between options using or
,
then press
save.
to select that function. Use or to make adjustments. Press
to
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
for 10 seconds to unlock the OSD and
5. Enables DDC/CI by default. Use OSD Exit Key , Press and hold the button for
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
10
shows on the screen.
Chapter 2.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-2. OSD functions
Controls and
Adjustments
(Analog)
Controls and
Adjustments
(Digital)
OSD Icon on Main
Menu
Submenu
Description
Adjusts overall screen
brightness
Same as Analog
Brightness
Brightness/
Contrast
Adjusts difference between
light and dark areas
Contrast
Moves image left or right.
Controls Locked -
not required for
digital input
Horizontal Position
Vertical Position
Image Position
Image Setup
Moves image up or
down.
Optimizes image (size,position,phase and clock).
Automatic
Manual
Manually optimizes image. See “Manual image
-
-
-
Clock
Phase
Save
Adjusts intensity of red, green, and blue.
Same as Analog
Image Properties
Preset mode
Color
-
-
-
-
Neutral
sRGB
Reddish
Bluish
Custom
-
-
-
-
Red: Increases or decreases the saturation of
’red’ in the image.
Green: Increases or decreases the saturation of
’green’ in the image.
Blue: Increases or decreases the saturation of
’blue’ in the image.
Save: Saves the custom color choices.
This monitor can accept video signals through two
different connectors. Most desktop computers use
a D-SUB connector. Select digital among OSD
Controls when you use DVI connector
Input signal
•
•
Selects D-SUB (Analog)
Selects DVI(Digital)
Chapter 2.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2-2. OSD functions
Controls and
Adjustments
(Analog)
Controls and
Adjustments
(Digital)
OSD Icon on Main
Menu
Submenu
Description
Same as Analog
Selects type of scaled image
-
Original AR: same aspect ratio with input
signal
Scaling
•
Full Screen :Expand image to full screen.
Screen Prioritization
Text Mode
•
•
•
•
Web pic Mode
Video Mode
Novo Vision
Information
Language
Split-screen Display
Shows resolution, refresh rate, and product details.
Same as Analog
Note: This screen does not allow any changes to
the settings.
Options
Changes languages of menu.
Note: The language chosen only affects the
language of the OSD. It has no effect on any
software running on the computer.
Same as Analog
Adjusts menu location
Position
Default
Default returns the menu position to the default
settings.
Custom
•
Horizontal: Changes the horizontal position of
the OSD.
•
Vertical: Changes the vertical position of the
OSD.
Save: save the custom position choices
Reset monitor to the original settings.
•
•
Cancel
Reset
Reset
Changes button repeat rate and menu time-out
setting.
Accessibility
Button repeat rate:
Select or to change.
-
-
-
Off
Default
Slow
Menu time out: Sets the length of time the
OSD will remain active after the last time a button
is pressed.
•
•
Mute On: Off the monitor's touchkey volume.
Mute Off: On the monitor's touchkey volume.
Mute
Exit from menu.
Exit
2-6
Chapter 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1920 x 1080 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability
NTSC
Refresh rate
60Hz
PAL
50Hz
640x350
70Hz
640x480
60Hz，72Hz，75Hz
70Hz
720x400
800x600
56Hz，60Hz，72Hz，75Hz
75Hz
832x624
1152x864
1024x768
1280x720
1280x800
1280x1024
1440x900
1600x900
1680x1050
1680x1050
1920x1080
75Hz
60Hz，70Hz，75Hz
60Hz
75Hz
60Hz，70Hz，75Hz
60Hz，75Hz
60Hz，75Hz
60Hz
75Hz（only VGA)
60Hz
Chapter 2.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding power management
Power management is invoked when the computer recognizes that you have not used
your mouse or keyboard for a user-definable period. There are several states as
described in the table below.
For optimal performance, switch off your monitor at the end of each working day, or
whenever you expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
Restoring
State
Power Indicator Screen
Operation
Compliance
On
Steady
Normal
Blank
Orange
Standby/Suspend
Press a key or
ENERGY STAR
move the mouse
There may be a
slight delay
before the image
reappears.
Note: Standby
also occurs if
there is no image
output to the
monitor.
Off
Off
Blank
Press the power ENERGY STAR
button
There may be a
slight delay
before the image
reappears.
Chapter 2.
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for your monitor
Be sure to turn off the power before you perform any maintenance on the monitor.
Do not:
•
•
•
Apply water or liquid directly to your monitor.
Use solvents or abrasives.
Use flammable cleaning materials to clean your monitor or any other electrical
equipment.
•
•
Touch the screen area of your monitor with sharp or abrasive items. This type of
contact may cause permanent damage to your screen.
Use any cleaner which contains an anti-static solution or similar additives. This
may harm the coating of the screen area.
Do:
•
Lightly dampen a soft cloth with water and use this to gently wipe the covers and
the screen.
•
Remove grease or finger marks with a damp cloth and a little mild detergent.
Detaching the monitor stand
Step 1:
Step 2: Lift up the hinge cover and remove it.
Step 3: Remove the three screws counterclockwise, take off the bracket,
and install the VESA mounting rack.
VESA holes
Chapter 2.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Reference information
This section contains monitor specifications, instructions to manually install the
monitor driver, troubleshooting information, and service information.
Monitor specifications
Table 3-1. Monitor specifications for type-model L2262wA
Dimensions
Height
Depth
Width
Stand
Tilt
Range: -5°, +20°
VESA mount
Image
Supported
Viewable image size
546.86 mm(21.53 in.)
268.11 mm (10.56 in.)
476.64 mm(18.77 in.)
Maximum height
Maximum width
Pixel pitch
0.248 mm (0.01 in.) (V)
Power input
Supply voltage
90-264VAC (100~240VAC+/-10%)
-
Max supply current
Normal operation
1.5 A
<
27 W
Power consumption
Note: Power consumption
figures are for the monitor
and the power supply
combined.
Standby/Suspend
Off
<1W(Analog),< 1W(Digital)
< 0.5W at 100Vac & 240Vac
Video input (Analog)
Input signal
Analog Direct Drive, 75 ohm 0.7V
1920 pixels (max)
Horizontal
-
addressability
-
Vertical addressability 1080 lines (max)
Clock frequency
Interface
210 MHz
DVI
Video input (Digital)
Input Signal
VESA TMDS (Panel Link™)
1920 pixels (max)
Horizontal
addressability
-
Vertical addressability 1080 lines (max)
Clock frequency 170 MHz
Chapter 3.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-1. Monitor specifications for type-model L2262wA
Communications
VESA DDC
CI
Supported Display Modes
(VESA Standard modes
between noted ranges)
Horizontal frequency
30 kHz - 83 kHz(Pixel clock <210MHz)
50 Hz - 76 Hz
Vertical frequency
Native Resolution
Operating
(Pixel clock <210MHz)
1920 x 1080 at 60 Hz
Temperature
0° to 40° C (32° to 104° F)
Storage
-20° to 60° C (-4° to 140° F)
Shipping
-20° to 60° C (-4° to 140° F)
Humidity
Operating
8% to 80% non-condensing
Storage
5% to 95% non-condensing
5% to 95% non-condensing
Shipping
Chapter 3.
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it
yourself. Before calling your dealer or Lenovo, try the suggested actions that are
appropriate to your problem.
Table 3-2. Troubleshooting
Problem
Possible cause
Suggested action
Reference
The words "Out The system is set to a If you are replacing an
“Selecting a
of Range" are
shown on the
screen, and the
power indicator
is flashing
display mode which
is not supported by
the monitor.
and adjust the display
mode to within the
specified range for your
new monitor.
mode” on page 2-7
.
If using a Windows
system, restart the system
in safe mode, then select a
supported display mode
for your computer.
If these options do not
work, contact the Support
Center.
The image
quality is
unacceptable.
The video signal cable Be sure the signal cable is “Connecting and
is not connected with firmly plugged into the
the monitor or system system and monitor.
completely.
turning on your
monitor” on page 1-4
The color settings
may be incorrect.
Select another color
setting from the OSD
menu.
“Adjusting your
page 2-3
The automatic image Perform automatic image “Adjusting your
setup function was
not performed.
setup.
page 2-3
The power
•
•
•
The monitor’s
power switch is
not switched on.
•
Be sure the power
cord is connected
properly.
“Connecting and
turning on your
monitor” on page 1-4
indicator is not
lit and there is
no image.
The power cord is
loose or
disconnected.
•
•
•
•
•
Be sure the outlet has
power.
Power on the
monitor.
There is no power
at the outlet.
Try using another
power cord.
Try using another
electrical outlet.
Screen is blank
and power
indicator is
steady amber or
flashing
The monitor is in
Standby/Suspend
mode
Press any key on the “Understanding
the mouse to restore on page 2-8
operation.
•
Check the Power
Options settings on
your computer.
Chapter 3.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3-2. Troubleshooting
Problem
Possible cause
Suggested action
Reference
The video signal cable Be sure the video cable is “Connecting and
The power
is loose or
connected with the
turning on your
indicator is white,
but there is no
image
disconnectedfromthe system properly.
system or monitor.
monitor” on page 1-4
The monitor
Adjust the brightness and “Adjusting your
brightness and
contrast are at the
lowest setting.
contrast setting on the
OSD menu.
page 2-3
One or more of
This is a characteristic If there are more than five Appendix A,
the pixels appear of the LCD
pixels missing, contact
Support,” on page
discolored
technology and is not the Support Center.
an LCD defect.
•
•
Fuzzy lines
in text or a
blurry
•
Image setup has
not been
optimized
Adjust the resolution
settings on your system
to match the native
resolution for this
monitor: 1920 x 1080 at 60
Hz.
“Adjusting your
page 2-3
image.
•
Your system
Display
Properties setting
have not been
optimized.
“Manual image
Horizontal
or vertical
lines
through the
image.
Perform automatic image “Selecting a
setup does not help,
perform manual image
setup.
mode” on page 2-7
When working in the
native resolution, you
may find additional
improvements by
adjusting the Dots Per
Inch (DPI) setting on your
system.
See the Advanced
section of your
system’s display
properties.
Manual image setup
If automatic image setup does not establish the image that you prefer, perform
manual image setup.
Note: Have your monitor powered on for about 15 minutes, until the monitor warms
up.
1. Press
at the bottom of the monitor to open the OSD menu.
2. Use or to select and press to access.
3. Use or to select Clock and Phase adjustment.
•
Clock (pixel frequency) adjusts the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the picture does not have the correct width.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the picture has horizontal disturbances in light picture.
4. When the image no longer looks distorted, save the Clock and Phase adjustments.
5. Press
to leave the OSD menu.
Chapter 3.
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually installing the monitor driver
Below are steps for manually installing the monitor driver in Microsoft Windows
7 Microsoft Windows Vista Microsoft Windows XP
. Please see the Install Driver
Driver CD for automatic installation.
section of the Reference and
Installing the monitor driver in Windows 7
To use the Plug and Play feature Microsoft Windows 7, do the following:
Note: You must download file from the Lenovo Monitor CD to use the Plug and Play
feature in Windows 7.
Turn off the computer and all attached devices.
Ensure that the monitor is connected correctly.
1.
2.
3.
Turn on the monitor and then the system unit. Allow your computer to start the
Windows 7 operating system.
4.
Open the Display Properties window by clicking Start, Control Panel and
Hardware and Sound icon. and then double-clicking the Display icon.
Click the Change the display settings tab.
Click the Advanced icon.
5.
6.
7.
Click the Monitor tab.
8.
Click the Properties button.
9.
Click the Driver tab.
Open the Hardware Update Wizard window by clicking on Update Driver and Next.
10.
11. Select Install from a list or Specific location(Advanced), and then click Next.
Select "Don't search. I will choose the driver to install" option, and then click Next.
12.
13.
Click the Have Disk button. Click the Browse button and navigate to the
following directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
Select the "
" file and click the Open button. Click the OK button.
LEN L2262wA.inf
14.
LEN L2262wA
your hard disk drive.
Select
and click Next. The files will be copied from the CD to
15.
16. Close all open windows and remove the CD.
Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
17.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either
x 480 at a refresh rate of 60 Hz.
at a refresh rate of 60 Hz, or 640
1920x1080
Chapter 3.
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows Vista
To use the Plug and Play feature Microsoft Windows Vista, do the following:
Note: You must download file from the Lenovo Monitor CD to use the Plug and Play
feature in Windows Vista.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows Vista operating system.
4. Open the Display Properties window by clicking Start, Control Panel and then
double-clicking the Hardware and Sound icon.
5. Click the Personalization icon.
6. Click the Display Settings icon.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking
on Update Driver and then click the "Browse my computer for driver software"
button.
12. Select "Let me pick from a list of device drivers on my computer".
13. Click the Have Disk button. Click the Browse button and navigate to the
following directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "
" file and click the Open button. Click the OK button.
LEN L2262wA.inf
15. Select
and click Next. The files will be copied from the CD to
LEN L2262wA
your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either
x 480 at a refresh rate of 60 Hz.
at a refresh rate of 60 Hz, or 640
1920x1080
Chapter 3.
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the monitor driver in Windows XP
To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD.
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4. Open the Display Properties window by clicking Start J Control Panel, and
then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Drivers tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver.
11. Select Install from a list or Specific location(Advanced), and then click Next.
12. Select "Don't search. I will choose the driver to install" option, and then click
Next.
13. Click the Have Disk button. Click on the Browse button and navigate to
the following directory:
X:\Monitor Drivers
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "
" file and click the Open button. Click the OK button.
LEN L2262wA.inf
15. Select LEN L2262wA and click Next. The files will be copied from the CD to
your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either
x 480 at a refresh rate of 60 Hz.
at a refresh rate of 60 Hz, or 640
1920x1080
Chapter 3.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Service and Support
The following information describes the technical support that is available for your product, during the
warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full
explanation of Lenovo warranty terms.
Registering your option
Register to receive product service and support updates, as well as free and discounted computer
accessories and content. Go to:
Online technical support
Online technical support is available during the lifetime of a product at:
Product replacement assistance or exchange of defective components also is available during the
warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to
service at your location. A Lenovo technical support representative can help you determine the best
alternative.
Telephone technical support
Installation and configuration support through the Customer Support Center will be available until 90
days after the option has been withdrawn from marketing. After that time, the support is cancelled, or
made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.
Before contacting a Lenovo technical support representative, please have the following information
available: option name and number, proof of purchase, computer manufacturer, model, serial number and
manual, the exact wording of any error message, description of the problem, and the hardware and
software configuration information for your system.
Your technical support representative might want to walk you through the problem while you are at your
computer during the call.
Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo
Support is
http
always available at:
h
http:/ / consumersupport.lenovo.com
Country
Telephone number
800-810-8888
400-810-8888
China
South Africa
Argentina
Australia
Austria
800982393
0800-444-2722 (Spanish)
1300-557-073
800295730 (German)
80076524 (French, Dutch)
800-100-764 (Spanish)
Belgium
Bolivia
A-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries.
Consult your local Lenovo representative for information on the products and services currently available
in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply
that only that Lenovo product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any Lenovo intellectual property right may be used instead.
However, it is the user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some
jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in
this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in
this document does not affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the intellectual property
rights of Lenovo or third parties. All information contained in this document was obtained in specific
environments and is presented as an illustration. The result obtained in other operating environments
may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not
in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part
of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the
result obtained in other operating environments may vary significantly. Some measurements may have
been made on development-level systems and there is no guarantee that these measurements will be the
same on generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.
B-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Recycling information
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their
equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist
equipment owners in recycling their IT products. For information on recycling Lenovo products, go to:
Collecting and recycling a disused Lenovo computer or monitor
If you are a company employee and need to dispose of a Lenovo computer or monitor that is the
property of the company, you must do so in accordance with the Law for Promotion of Effective
Utilization of Resources. Computers and monitors are categorized as industrial waste and should be
properly disposed of by an industrial waste disposal contractor certified by a local government. In
accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides,
through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused
computers and monitors. For details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/
pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and
recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This
service is provided free of charge for home-used computers sold after October 1, 2003. For details, visit
the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/personal/.
Disposing of Lenovo computer components
Some Lenovo computer products sold in Japan may have components that contain heavy metals or other
environmental sensitive substances. To properly dispose of disused components, such as a printed circuit
board or drive, use the methods described above for collecting and recycling a disused computer or
monitor.
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
The Lenovo logo
ThinkCentre
ThinkPad
ThinkVision
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.
Other company, product, or service names may be trademarks or service marks of others.
B-2
Download from Www.Somanuals.com. All Manuals Search And Download.
|